Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/drivers/i2c/busses/i2c-ali1563.c b/drivers/i2c/busses/i2c-ali1563.c
new file mode 100644
index 0000000..3571081
--- /dev/null
+++ b/drivers/i2c/busses/i2c-ali1563.c
@@ -0,0 +1,415 @@
+/**
+ * i2c-ali1563.c - i2c driver for the ALi 1563 Southbridge
+ *
+ * Copyright (C) 2004 Patrick Mochel
+ *
+ * The 1563 southbridge is deceptively similar to the 1533, with a
+ * few notable exceptions. One of those happens to be the fact they
+ * upgraded the i2c core to be 2.0 compliant, and happens to be almost
+ * identical to the i2c controller found in the Intel 801 south
+ * bridges.
+ *
+ * This driver is based on a mix of the 15x3, 1535, and i801 drivers,
+ * with a little help from the ALi 1563 spec.
+ *
+ * This file is released under the GPLv2
+ */
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+
+#define ALI1563_MAX_TIMEOUT 500
+#define ALI1563_SMBBA 0x80
+#define ALI1563_SMB_IOEN 1
+#define ALI1563_SMB_HOSTEN 2
+#define ALI1563_SMB_IOSIZE 16
+
+#define SMB_HST_STS (ali1563_smba + 0)
+#define SMB_HST_CNTL1 (ali1563_smba + 1)
+#define SMB_HST_CNTL2 (ali1563_smba + 2)
+#define SMB_HST_CMD (ali1563_smba + 3)
+#define SMB_HST_ADD (ali1563_smba + 4)
+#define SMB_HST_DAT0 (ali1563_smba + 5)
+#define SMB_HST_DAT1 (ali1563_smba + 6)
+#define SMB_BLK_DAT (ali1563_smba + 7)
+
+#define HST_STS_BUSY 0x01
+#define HST_STS_INTR 0x02
+#define HST_STS_DEVERR 0x04
+#define HST_STS_BUSERR 0x08
+#define HST_STS_FAIL 0x10
+#define HST_STS_DONE 0x80
+#define HST_STS_BAD 0x1c
+
+
+#define HST_CNTL1_TIMEOUT 0x80
+#define HST_CNTL1_LAST 0x40
+
+#define HST_CNTL2_KILL 0x04
+#define HST_CNTL2_START 0x40
+#define HST_CNTL2_QUICK 0x00
+#define HST_CNTL2_BYTE 0x01
+#define HST_CNTL2_BYTE_DATA 0x02
+#define HST_CNTL2_WORD_DATA 0x03
+#define HST_CNTL2_BLOCK 0x05
+
+
+
+static unsigned short ali1563_smba;
+
+static int ali1563_transaction(struct i2c_adapter * a)
+{
+ u32 data;
+ int timeout;
+
+ dev_dbg(&a->dev, "Transaction (pre): STS=%02x, CNTL1=%02x, "
+ "CNTL2=%02x, CMD=%02x, ADD=%02x, DAT0=%02x, DAT1=%02x\n",
+ inb_p(SMB_HST_STS), inb_p(SMB_HST_CNTL1), inb_p(SMB_HST_CNTL2),
+ inb_p(SMB_HST_CMD), inb_p(SMB_HST_ADD), inb_p(SMB_HST_DAT0),
+ inb_p(SMB_HST_DAT1));
+
+ data = inb_p(SMB_HST_STS);
+ if (data & HST_STS_BAD) {
+ dev_warn(&a->dev,"ali1563: Trying to reset busy device\n");
+ outb_p(data | HST_STS_BAD,SMB_HST_STS);
+ data = inb_p(SMB_HST_STS);
+ if (data & HST_STS_BAD)
+ return -EBUSY;
+ }
+ outb_p(inb_p(SMB_HST_CNTL2) | HST_CNTL2_START, SMB_HST_CNTL2);
+
+ timeout = ALI1563_MAX_TIMEOUT;
+ do
+ msleep(1);
+ while (((data = inb_p(SMB_HST_STS)) & HST_STS_BUSY) && --timeout);
+
+ dev_dbg(&a->dev, "Transaction (post): STS=%02x, CNTL1=%02x, "
+ "CNTL2=%02x, CMD=%02x, ADD=%02x, DAT0=%02x, DAT1=%02x\n",
+ inb_p(SMB_HST_STS), inb_p(SMB_HST_CNTL1), inb_p(SMB_HST_CNTL2),
+ inb_p(SMB_HST_CMD), inb_p(SMB_HST_ADD), inb_p(SMB_HST_DAT0),
+ inb_p(SMB_HST_DAT1));
+
+ if (timeout && !(data & HST_STS_BAD))
+ return 0;
+ dev_warn(&a->dev, "SMBus Error: %s%s%s%s%s\n",
+ timeout ? "Timeout " : "",
+ data & HST_STS_FAIL ? "Transaction Failed " : "",
+ data & HST_STS_BUSERR ? "No response or Bus Collision " : "",
+ data & HST_STS_DEVERR ? "Device Error " : "",
+ !(data & HST_STS_DONE) ? "Transaction Never Finished " : "");
+
+ if (!(data & HST_STS_DONE))
+ /* Issue 'kill' to host controller */
+ outb_p(HST_CNTL2_KILL,SMB_HST_CNTL2);
+ else
+ /* Issue timeout to reset all devices on bus */
+ outb_p(HST_CNTL1_TIMEOUT,SMB_HST_CNTL1);
+ return -1;
+}
+
+static int ali1563_block_start(struct i2c_adapter * a)
+{
+ u32 data;
+ int timeout;
+
+ dev_dbg(&a->dev, "Block (pre): STS=%02x, CNTL1=%02x, "
+ "CNTL2=%02x, CMD=%02x, ADD=%02x, DAT0=%02x, DAT1=%02x\n",
+ inb_p(SMB_HST_STS), inb_p(SMB_HST_CNTL1), inb_p(SMB_HST_CNTL2),
+ inb_p(SMB_HST_CMD), inb_p(SMB_HST_ADD), inb_p(SMB_HST_DAT0),
+ inb_p(SMB_HST_DAT1));
+
+ data = inb_p(SMB_HST_STS);
+ if (data & HST_STS_BAD) {
+ dev_warn(&a->dev,"ali1563: Trying to reset busy device\n");
+ outb_p(data | HST_STS_BAD,SMB_HST_STS);
+ data = inb_p(SMB_HST_STS);
+ if (data & HST_STS_BAD)
+ return -EBUSY;
+ }
+
+ /* Clear byte-ready bit */
+ outb_p(data | HST_STS_DONE, SMB_HST_STS);
+
+ /* Start transaction and wait for byte-ready bit to be set */
+ outb_p(inb_p(SMB_HST_CNTL2) | HST_CNTL2_START, SMB_HST_CNTL2);
+
+ timeout = ALI1563_MAX_TIMEOUT;
+ do
+ msleep(1);
+ while (!((data = inb_p(SMB_HST_STS)) & HST_STS_DONE) && --timeout);
+
+ dev_dbg(&a->dev, "Block (post): STS=%02x, CNTL1=%02x, "
+ "CNTL2=%02x, CMD=%02x, ADD=%02x, DAT0=%02x, DAT1=%02x\n",
+ inb_p(SMB_HST_STS), inb_p(SMB_HST_CNTL1), inb_p(SMB_HST_CNTL2),
+ inb_p(SMB_HST_CMD), inb_p(SMB_HST_ADD), inb_p(SMB_HST_DAT0),
+ inb_p(SMB_HST_DAT1));
+
+ if (timeout && !(data & HST_STS_BAD))
+ return 0;
+ dev_warn(&a->dev, "SMBus Error: %s%s%s%s%s\n",
+ timeout ? "Timeout " : "",
+ data & HST_STS_FAIL ? "Transaction Failed " : "",
+ data & HST_STS_BUSERR ? "No response or Bus Collision " : "",
+ data & HST_STS_DEVERR ? "Device Error " : "",
+ !(data & HST_STS_DONE) ? "Transaction Never Finished " : "");
+ return -1;
+}
+
+static int ali1563_block(struct i2c_adapter * a, union i2c_smbus_data * data, u8 rw)
+{
+ int i, len;
+ int error = 0;
+
+ /* Do we need this? */
+ outb_p(HST_CNTL1_LAST,SMB_HST_CNTL1);
+
+ if (rw == I2C_SMBUS_WRITE) {
+ len = data->block[0];
+ if (len < 1)
+ len = 1;
+ else if (len > 32)
+ len = 32;
+ outb_p(len,SMB_HST_DAT0);
+ outb_p(data->block[1],SMB_BLK_DAT);
+ } else
+ len = 32;
+
+ outb_p(inb_p(SMB_HST_CNTL2) | HST_CNTL2_BLOCK, SMB_HST_CNTL2);
+
+ for (i = 0; i < len; i++) {
+ if (rw == I2C_SMBUS_WRITE) {
+ outb_p(data->block[i + 1], SMB_BLK_DAT);
+ if ((error = ali1563_block_start(a)))
+ break;
+ } else {
+ if ((error = ali1563_block_start(a)))
+ break;
+ if (i == 0) {
+ len = inb_p(SMB_HST_DAT0);
+ if (len < 1)
+ len = 1;
+ else if (len > 32)
+ len = 32;
+ }
+ data->block[i+1] = inb_p(SMB_BLK_DAT);
+ }
+ }
+ /* Do we need this? */
+ outb_p(HST_CNTL1_LAST,SMB_HST_CNTL1);
+ return error;
+}
+
+static s32 ali1563_access(struct i2c_adapter * a, u16 addr,
+ unsigned short flags, char rw, u8 cmd,
+ int size, union i2c_smbus_data * data)
+{
+ int error = 0;
+ int timeout;
+ u32 reg;
+
+ for (timeout = ALI1563_MAX_TIMEOUT; timeout; timeout--) {
+ if (!(reg = inb_p(SMB_HST_STS) & HST_STS_BUSY))
+ break;
+ }
+ if (!timeout)
+ dev_warn(&a->dev,"SMBus not idle. HST_STS = %02x\n",reg);
+ outb_p(0xff,SMB_HST_STS);
+
+ /* Map the size to what the chip understands */
+ switch (size) {
+ case I2C_SMBUS_PROC_CALL:
+ dev_err(&a->dev, "I2C_SMBUS_PROC_CALL not supported!\n");
+ error = -EINVAL;
+ break;
+ case I2C_SMBUS_QUICK:
+ size = HST_CNTL2_QUICK;
+ break;
+ case I2C_SMBUS_BYTE:
+ size = HST_CNTL2_BYTE;
+ break;
+ case I2C_SMBUS_BYTE_DATA:
+ size = HST_CNTL2_BYTE_DATA;
+ break;
+ case I2C_SMBUS_WORD_DATA:
+ size = HST_CNTL2_WORD_DATA;
+ break;
+ case I2C_SMBUS_BLOCK_DATA:
+ size = HST_CNTL2_BLOCK;
+ break;
+ }
+
+ outb_p(((addr & 0x7f) << 1) | (rw & 0x01), SMB_HST_ADD);
+ outb_p(inb_p(SMB_HST_CNTL2) | (size << 3), SMB_HST_CNTL2);
+
+ /* Write the command register */
+ switch(size) {
+ case HST_CNTL2_BYTE:
+ if (rw== I2C_SMBUS_WRITE)
+ outb_p(cmd, SMB_HST_CMD);
+ break;
+ case HST_CNTL2_BYTE_DATA:
+ outb_p(cmd, SMB_HST_CMD);
+ if (rw == I2C_SMBUS_WRITE)
+ outb_p(data->byte, SMB_HST_DAT0);
+ break;
+ case HST_CNTL2_WORD_DATA:
+ outb_p(cmd, SMB_HST_CMD);
+ if (rw == I2C_SMBUS_WRITE) {
+ outb_p(data->word & 0xff, SMB_HST_DAT0);
+ outb_p((data->word & 0xff00) >> 8, SMB_HST_DAT1);
+ }
+ break;
+ case HST_CNTL2_BLOCK:
+ outb_p(cmd, SMB_HST_CMD);
+ error = ali1563_block(a,data,rw);
+ goto Done;
+ }
+
+ if ((error = ali1563_transaction(a)))
+ goto Done;
+
+ if ((rw == I2C_SMBUS_WRITE) || (size == HST_CNTL2_QUICK))
+ goto Done;
+
+ switch (size) {
+ case HST_CNTL2_BYTE: /* Result put in SMBHSTDAT0 */
+ data->byte = inb_p(SMB_HST_DAT0);
+ break;
+ case HST_CNTL2_BYTE_DATA:
+ data->byte = inb_p(SMB_HST_DAT0);
+ break;
+ case HST_CNTL2_WORD_DATA:
+ data->word = inb_p(SMB_HST_DAT0) + (inb_p(SMB_HST_DAT1) << 8);
+ break;
+ }
+Done:
+ return error;
+}
+
+static u32 ali1563_func(struct i2c_adapter * a)
+{
+ return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
+ I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
+ I2C_FUNC_SMBUS_BLOCK_DATA;
+}
+
+
+static void ali1563_enable(struct pci_dev * dev)
+{
+ u16 ctrl;
+
+ pci_read_config_word(dev,ALI1563_SMBBA,&ctrl);
+ ctrl |= 0x7;
+ pci_write_config_word(dev,ALI1563_SMBBA,ctrl);
+}
+
+static int __devinit ali1563_setup(struct pci_dev * dev)
+{
+ u16 ctrl;
+
+ pci_read_config_word(dev,ALI1563_SMBBA,&ctrl);
+ printk("ali1563: SMBus control = %04x\n",ctrl);
+
+ /* Check if device is even enabled first */
+ if (!(ctrl & ALI1563_SMB_IOEN)) {
+ dev_warn(&dev->dev,"I/O space not enabled, trying manually\n");
+ ali1563_enable(dev);
+ }
+ if (!(ctrl & ALI1563_SMB_IOEN)) {
+ dev_warn(&dev->dev,"I/O space still not enabled, giving up\n");
+ goto Err;
+ }
+ if (!(ctrl & ALI1563_SMB_HOSTEN)) {
+ dev_warn(&dev->dev,"Host Controller not enabled\n");
+ goto Err;
+ }
+
+ /* SMB I/O Base in high 12 bits and must be aligned with the
+ * size of the I/O space. */
+ ali1563_smba = ctrl & ~(ALI1563_SMB_IOSIZE - 1);
+ if (!ali1563_smba) {
+ dev_warn(&dev->dev,"ali1563_smba Uninitialized\n");
+ goto Err;
+ }
+ if (!request_region(ali1563_smba,ALI1563_SMB_IOSIZE,"i2c-ali1563")) {
+ dev_warn(&dev->dev,"Could not allocate I/O space");
+ goto Err;
+ }
+
+ return 0;
+Err:
+ return -ENODEV;
+}
+
+static void ali1563_shutdown(struct pci_dev *dev)
+{
+ release_region(ali1563_smba,ALI1563_SMB_IOSIZE);
+}
+
+static struct i2c_algorithm ali1563_algorithm = {
+ .name = "Non-i2c SMBus adapter",
+ .id = I2C_ALGO_SMBUS,
+ .smbus_xfer = ali1563_access,
+ .functionality = ali1563_func,
+};
+
+static struct i2c_adapter ali1563_adapter = {
+ .owner = THIS_MODULE,
+ .class = I2C_CLASS_HWMON,
+ .algo = &ali1563_algorithm,
+};
+
+static int __devinit ali1563_probe(struct pci_dev * dev,
+ const struct pci_device_id * id_table)
+{
+ int error;
+
+ if ((error = ali1563_setup(dev)))
+ return error;
+ ali1563_adapter.dev.parent = &dev->dev;
+ sprintf(ali1563_adapter.name,"SMBus ALi 1563 Adapter @ %04x",
+ ali1563_smba);
+ if ((error = i2c_add_adapter(&ali1563_adapter)))
+ ali1563_shutdown(dev);
+ printk("%s: Returning %d\n",__FUNCTION__,error);
+ return error;
+}
+
+static void __devexit ali1563_remove(struct pci_dev * dev)
+{
+ i2c_del_adapter(&ali1563_adapter);
+ ali1563_shutdown(dev);
+}
+
+static struct pci_device_id __devinitdata ali1563_id_table[] = {
+ { PCI_DEVICE(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1563) },
+ {},
+};
+
+MODULE_DEVICE_TABLE (pci, ali1563_id_table);
+
+static struct pci_driver ali1563_pci_driver = {
+ .name = "ali1563_i2c",
+ .id_table = ali1563_id_table,
+ .probe = ali1563_probe,
+ .remove = __devexit_p(ali1563_remove),
+};
+
+static int __init ali1563_init(void)
+{
+ return pci_register_driver(&ali1563_pci_driver);
+}
+
+module_init(ali1563_init);
+
+static void __exit ali1563_exit(void)
+{
+ pci_unregister_driver(&ali1563_pci_driver);
+}
+
+module_exit(ali1563_exit);
+
+MODULE_LICENSE("GPL");