Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/drivers/i2c/busses/i2c-nforce2.c b/drivers/i2c/busses/i2c-nforce2.c
new file mode 100644
index 0000000..6d13127
--- /dev/null
+++ b/drivers/i2c/busses/i2c-nforce2.c
@@ -0,0 +1,410 @@
+/*
+ SMBus driver for nVidia nForce2 MCP
+
+ Added nForce3 Pro 150 Thomas Leibold <thomas@plx.com>,
+ Ported to 2.5 Patrick Dreker <patrick@dreker.de>,
+ Copyright (c) 2003 Hans-Frieder Vogt <hfvogt@arcor.de>,
+ Based on
+ SMBus 2.0 driver for AMD-8111 IO-Hub
+ Copyright (c) 2002 Vojtech Pavlik
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+/*
+ SUPPORTED DEVICES PCI ID
+ nForce2 MCP 0064
+ nForce2 Ultra 400 MCP 0084
+ nForce3 Pro150 MCP 00D4
+ nForce3 250Gb MCP 00E4
+ nForce4 MCP 0052
+
+ This driver supports the 2 SMBuses that are included in the MCP of the
+ nForce2/3/4 chipsets.
+*/
+
+/* Note: we assume there can only be one nForce2, with two SMBus interfaces */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/stddef.h>
+#include <linux/sched.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/delay.h>
+#include <asm/io.h>
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR ("Hans-Frieder Vogt <hfvogt@arcor.de>");
+MODULE_DESCRIPTION("nForce2 SMBus driver");
+
+
+struct nforce2_smbus {
+ struct pci_dev *dev;
+ struct i2c_adapter adapter;
+ int base;
+ int size;
+};
+
+
+/*
+ * nVidia nForce2 SMBus control register definitions
+ */
+#define NFORCE_PCI_SMB1 0x50
+#define NFORCE_PCI_SMB2 0x54
+
+
+/*
+ * ACPI 2.0 chapter 13 SMBus 2.0 EC register model
+ */
+#define NVIDIA_SMB_PRTCL (smbus->base + 0x00) /* protocol, PEC */
+#define NVIDIA_SMB_STS (smbus->base + 0x01) /* status */
+#define NVIDIA_SMB_ADDR (smbus->base + 0x02) /* address */
+#define NVIDIA_SMB_CMD (smbus->base + 0x03) /* command */
+#define NVIDIA_SMB_DATA (smbus->base + 0x04) /* 32 data registers */
+#define NVIDIA_SMB_BCNT (smbus->base + 0x24) /* number of data bytes */
+#define NVIDIA_SMB_ALRM_A (smbus->base + 0x25) /* alarm address */
+#define NVIDIA_SMB_ALRM_D (smbus->base + 0x26) /* 2 bytes alarm data */
+
+#define NVIDIA_SMB_STS_DONE 0x80
+#define NVIDIA_SMB_STS_ALRM 0x40
+#define NVIDIA_SMB_STS_RES 0x20
+#define NVIDIA_SMB_STS_STATUS 0x1f
+
+#define NVIDIA_SMB_PRTCL_WRITE 0x00
+#define NVIDIA_SMB_PRTCL_READ 0x01
+#define NVIDIA_SMB_PRTCL_QUICK 0x02
+#define NVIDIA_SMB_PRTCL_BYTE 0x04
+#define NVIDIA_SMB_PRTCL_BYTE_DATA 0x06
+#define NVIDIA_SMB_PRTCL_WORD_DATA 0x08
+#define NVIDIA_SMB_PRTCL_BLOCK_DATA 0x0a
+#define NVIDIA_SMB_PRTCL_PROC_CALL 0x0c
+#define NVIDIA_SMB_PRTCL_BLOCK_PROC_CALL 0x0d
+#define NVIDIA_SMB_PRTCL_I2C_BLOCK_DATA 0x4a
+#define NVIDIA_SMB_PRTCL_PEC 0x80
+
+
+/* Other settings */
+#define MAX_TIMEOUT 256
+
+
+
+static s32 nforce2_access(struct i2c_adapter *adap, u16 addr,
+ unsigned short flags, char read_write,
+ u8 command, int size, union i2c_smbus_data *data);
+static u32 nforce2_func(struct i2c_adapter *adapter);
+
+
+static struct i2c_algorithm smbus_algorithm = {
+ .name = "Non-I2C SMBus adapter",
+ .id = I2C_ALGO_SMBUS,
+ .smbus_xfer = nforce2_access,
+ .functionality = nforce2_func,
+};
+
+static struct i2c_adapter nforce2_adapter = {
+ .owner = THIS_MODULE,
+ .class = I2C_CLASS_HWMON,
+ .algo = &smbus_algorithm,
+ .name = "unset",
+};
+
+/* Return -1 on error. See smbus.h for more information */
+static s32 nforce2_access(struct i2c_adapter * adap, u16 addr,
+ unsigned short flags, char read_write,
+ u8 command, int size, union i2c_smbus_data * data)
+{
+ struct nforce2_smbus *smbus = adap->algo_data;
+ unsigned char protocol, pec, temp;
+ unsigned char len = 0; /* to keep the compiler quiet */
+ int timeout = 0;
+ int i;
+
+ protocol = (read_write == I2C_SMBUS_READ) ? NVIDIA_SMB_PRTCL_READ :
+ NVIDIA_SMB_PRTCL_WRITE;
+ pec = (flags & I2C_CLIENT_PEC) ? NVIDIA_SMB_PRTCL_PEC : 0;
+
+ switch (size) {
+
+ case I2C_SMBUS_QUICK:
+ protocol |= NVIDIA_SMB_PRTCL_QUICK;
+ read_write = I2C_SMBUS_WRITE;
+ break;
+
+ case I2C_SMBUS_BYTE:
+ if (read_write == I2C_SMBUS_WRITE)
+ outb_p(command, NVIDIA_SMB_CMD);
+ protocol |= NVIDIA_SMB_PRTCL_BYTE;
+ break;
+
+ case I2C_SMBUS_BYTE_DATA:
+ outb_p(command, NVIDIA_SMB_CMD);
+ if (read_write == I2C_SMBUS_WRITE)
+ outb_p(data->byte, NVIDIA_SMB_DATA);
+ protocol |= NVIDIA_SMB_PRTCL_BYTE_DATA;
+ break;
+
+ case I2C_SMBUS_WORD_DATA:
+ outb_p(command, NVIDIA_SMB_CMD);
+ if (read_write == I2C_SMBUS_WRITE) {
+ outb_p(data->word, NVIDIA_SMB_DATA);
+ outb_p(data->word >> 8, NVIDIA_SMB_DATA+1);
+ }
+ protocol |= NVIDIA_SMB_PRTCL_WORD_DATA | pec;
+ break;
+
+ case I2C_SMBUS_BLOCK_DATA:
+ outb_p(command, NVIDIA_SMB_CMD);
+ if (read_write == I2C_SMBUS_WRITE) {
+ len = min_t(u8, data->block[0], 32);
+ outb_p(len, NVIDIA_SMB_BCNT);
+ for (i = 0; i < len; i++)
+ outb_p(data->block[i + 1], NVIDIA_SMB_DATA+i);
+ }
+ protocol |= NVIDIA_SMB_PRTCL_BLOCK_DATA | pec;
+ break;
+
+ case I2C_SMBUS_I2C_BLOCK_DATA:
+ len = min_t(u8, data->block[0], 32);
+ outb_p(command, NVIDIA_SMB_CMD);
+ outb_p(len, NVIDIA_SMB_BCNT);
+ if (read_write == I2C_SMBUS_WRITE)
+ for (i = 0; i < len; i++)
+ outb_p(data->block[i + 1], NVIDIA_SMB_DATA+i);
+ protocol |= NVIDIA_SMB_PRTCL_I2C_BLOCK_DATA;
+ break;
+
+ case I2C_SMBUS_PROC_CALL:
+ dev_err(&adap->dev, "I2C_SMBUS_PROC_CALL not supported!\n");
+ return -1;
+ /*
+ outb_p(command, NVIDIA_SMB_CMD);
+ outb_p(data->word, NVIDIA_SMB_DATA);
+ outb_p(data->word >> 8, NVIDIA_SMB_DATA + 1);
+ protocol = NVIDIA_SMB_PRTCL_PROC_CALL | pec;
+ read_write = I2C_SMBUS_READ;
+ break;
+ */
+
+ case I2C_SMBUS_BLOCK_PROC_CALL:
+ dev_err(&adap->dev, "I2C_SMBUS_BLOCK_PROC_CALL not supported!\n");
+ return -1;
+ /*
+ protocol |= pec;
+ len = min_t(u8, data->block[0], 31);
+ outb_p(command, NVIDIA_SMB_CMD);
+ outb_p(len, NVIDIA_SMB_BCNT);
+ for (i = 0; i < len; i++)
+ outb_p(data->block[i + 1], NVIDIA_SMB_DATA + i);
+ protocol = NVIDIA_SMB_PRTCL_BLOCK_PROC_CALL | pec;
+ read_write = I2C_SMBUS_READ;
+ break;
+ */
+
+ case I2C_SMBUS_WORD_DATA_PEC:
+ case I2C_SMBUS_BLOCK_DATA_PEC:
+ case I2C_SMBUS_PROC_CALL_PEC:
+ case I2C_SMBUS_BLOCK_PROC_CALL_PEC:
+ dev_err(&adap->dev, "Unexpected software PEC transaction %d\n.", size);
+ return -1;
+
+ default:
+ dev_err(&adap->dev, "Unsupported transaction %d\n", size);
+ return -1;
+ }
+
+ outb_p((addr & 0x7f) << 1, NVIDIA_SMB_ADDR);
+ outb_p(protocol, NVIDIA_SMB_PRTCL);
+
+ temp = inb_p(NVIDIA_SMB_STS);
+
+#if 0
+ do {
+ i2c_do_pause(1);
+ temp = inb_p(NVIDIA_SMB_STS);
+ } while (((temp & NVIDIA_SMB_STS_DONE) == 0) && (timeout++ < MAX_TIMEOUT));
+#endif
+ if (~temp & NVIDIA_SMB_STS_DONE) {
+ udelay(500);
+ temp = inb_p(NVIDIA_SMB_STS);
+ }
+ if (~temp & NVIDIA_SMB_STS_DONE) {
+ msleep(10);
+ temp = inb_p(NVIDIA_SMB_STS);
+ }
+
+ if ((timeout >= MAX_TIMEOUT) || (~temp & NVIDIA_SMB_STS_DONE)
+ || (temp & NVIDIA_SMB_STS_STATUS))
+ return -1;
+
+ if (read_write == I2C_SMBUS_WRITE)
+ return 0;
+
+ switch (size) {
+
+ case I2C_SMBUS_BYTE:
+ case I2C_SMBUS_BYTE_DATA:
+ data->byte = inb_p(NVIDIA_SMB_DATA);
+ break;
+
+ case I2C_SMBUS_WORD_DATA:
+ /* case I2C_SMBUS_PROC_CALL: not supported */
+ data->word = inb_p(NVIDIA_SMB_DATA) | (inb_p(NVIDIA_SMB_DATA+1) << 8);
+ break;
+
+ case I2C_SMBUS_BLOCK_DATA:
+ /* case I2C_SMBUS_BLOCK_PROC_CALL: not supported */
+ len = inb_p(NVIDIA_SMB_BCNT);
+ len = min_t(u8, len, 32);
+ case I2C_SMBUS_I2C_BLOCK_DATA:
+ for (i = 0; i < len; i++)
+ data->block[i+1] = inb_p(NVIDIA_SMB_DATA + i);
+ data->block[0] = len;
+ break;
+ }
+
+ return 0;
+}
+
+
+static u32 nforce2_func(struct i2c_adapter *adapter)
+{
+ /* other functionality might be possible, but is not tested */
+ return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
+ I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA /* |
+ I2C_FUNC_SMBUS_BLOCK_DATA */;
+}
+
+
+static struct pci_device_id nforce2_ids[] = {
+ { PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2_SMBUS) },
+ { PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2S_SMBUS) },
+ { PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3_SMBUS) },
+ { PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3S_SMBUS) },
+ { PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE4_SMBUS) },
+ { 0 }
+};
+
+
+MODULE_DEVICE_TABLE (pci, nforce2_ids);
+
+
+static int __devinit nforce2_probe_smb (struct pci_dev *dev, int reg,
+ struct nforce2_smbus *smbus, char *name)
+{
+ u16 iobase;
+ int error;
+
+ if (pci_read_config_word(dev, reg, &iobase) != PCIBIOS_SUCCESSFUL) {
+ dev_err(&smbus->adapter.dev, "Error reading PCI config for %s\n", name);
+ return -1;
+ }
+ smbus->dev = dev;
+ smbus->base = iobase & 0xfffc;
+ smbus->size = 8;
+
+ if (!request_region(smbus->base, smbus->size, "nForce2 SMBus")) {
+ dev_err(&smbus->adapter.dev, "Error requesting region %02x .. %02X for %s\n",
+ smbus->base, smbus->base+smbus->size-1, name);
+ return -1;
+ }
+ smbus->adapter = nforce2_adapter;
+ smbus->adapter.algo_data = smbus;
+ smbus->adapter.dev.parent = &dev->dev;
+ snprintf(smbus->adapter.name, I2C_NAME_SIZE,
+ "SMBus nForce2 adapter at %04x", smbus->base);
+
+ error = i2c_add_adapter(&smbus->adapter);
+ if (error) {
+ dev_err(&smbus->adapter.dev, "Failed to register adapter.\n");
+ release_region(smbus->base, smbus->size);
+ return -1;
+ }
+ dev_info(&smbus->adapter.dev, "nForce2 SMBus adapter at %#x\n", smbus->base);
+ return 0;
+}
+
+
+static int __devinit nforce2_probe(struct pci_dev *dev, const struct pci_device_id *id)
+{
+ struct nforce2_smbus *smbuses;
+ int res1, res2;
+
+ /* we support 2 SMBus adapters */
+ if (!(smbuses = (void *)kmalloc(2*sizeof(struct nforce2_smbus),
+ GFP_KERNEL)))
+ return -ENOMEM;
+ memset (smbuses, 0, 2*sizeof(struct nforce2_smbus));
+ pci_set_drvdata(dev, smbuses);
+
+ /* SMBus adapter 1 */
+ res1 = nforce2_probe_smb (dev, NFORCE_PCI_SMB1, &smbuses[0], "SMB1");
+ if (res1 < 0) {
+ dev_err(&dev->dev, "Error probing SMB1.\n");
+ smbuses[0].base = 0; /* to have a check value */
+ }
+ res2 = nforce2_probe_smb (dev, NFORCE_PCI_SMB2, &smbuses[1], "SMB2");
+ if (res2 < 0) {
+ dev_err(&dev->dev, "Error probing SMB2.\n");
+ smbuses[1].base = 0; /* to have a check value */
+ }
+ if ((res1 < 0) && (res2 < 0)) {
+ /* we did not find even one of the SMBuses, so we give up */
+ kfree(smbuses);
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+
+static void __devexit nforce2_remove(struct pci_dev *dev)
+{
+ struct nforce2_smbus *smbuses = (void*) pci_get_drvdata(dev);
+
+ if (smbuses[0].base) {
+ i2c_del_adapter(&smbuses[0].adapter);
+ release_region(smbuses[0].base, smbuses[0].size);
+ }
+ if (smbuses[1].base) {
+ i2c_del_adapter(&smbuses[1].adapter);
+ release_region(smbuses[1].base, smbuses[1].size);
+ }
+ kfree(smbuses);
+}
+
+static struct pci_driver nforce2_driver = {
+ .name = "nForce2_smbus",
+ .id_table = nforce2_ids,
+ .probe = nforce2_probe,
+ .remove = __devexit_p(nforce2_remove),
+};
+
+static int __init nforce2_init(void)
+{
+ return pci_register_driver(&nforce2_driver);
+}
+
+static void __exit nforce2_exit(void)
+{
+ pci_unregister_driver(&nforce2_driver);
+}
+
+module_init(nforce2_init);
+module_exit(nforce2_exit);
+