Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/drivers/ide/legacy/umc8672.c b/drivers/ide/legacy/umc8672.c
new file mode 100644
index 0000000..cdbdb2f
--- /dev/null
+++ b/drivers/ide/legacy/umc8672.c
@@ -0,0 +1,183 @@
+/*
+ * linux/drivers/ide/legacy/umc8672.c Version 0.05 Jul 31, 1996
+ *
+ * Copyright (C) 1995-1996 Linus Torvalds & author (see below)
+ */
+
+/*
+ * Principal Author/Maintainer: PODIEN@hml2.atlas.de (Wolfram Podien)
+ *
+ * This file provides support for the advanced features
+ * of the UMC 8672 IDE interface.
+ *
+ * Version 0.01 Initial version, hacked out of ide.c,
+ * and #include'd rather than compiled separately.
+ * This will get cleaned up in a subsequent release.
+ *
+ * Version 0.02 now configs/compiles separate from ide.c -ml
+ * Version 0.03 enhanced auto-tune, fix display bug
+ * Version 0.05 replace sti() with restore_flags() -ml
+ * add detection of possible race condition -ml
+ */
+
+/*
+ * VLB Controller Support from
+ * Wolfram Podien
+ * Rohoefe 3
+ * D28832 Achim
+ * Germany
+ *
+ * To enable UMC8672 support there must a lilo line like
+ * append="ide0=umc8672"...
+ * To set the speed according to the abilities of the hardware there must be a
+ * line like
+ * #define UMC_DRIVE0 11
+ * in the beginning of the driver, which sets the speed of drive 0 to 11 (there
+ * are some lines present). 0 - 11 are allowed speed values. These values are
+ * the results from the DOS speed test program supplied from UMC. 11 is the
+ * highest speed (about PIO mode 3)
+ */
+#define REALLY_SLOW_IO /* some systems can safely undef this */
+
+#include <linux/module.h>
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/timer.h>
+#include <linux/mm.h>
+#include <linux/ioport.h>
+#include <linux/blkdev.h>
+#include <linux/hdreg.h>
+#include <linux/ide.h>
+#include <linux/init.h>
+
+#include <asm/io.h>
+
+/*
+ * Default speeds. These can be changed with "auto-tune" and/or hdparm.
+ */
+#define UMC_DRIVE0 1 /* DOS measured drive speeds */
+#define UMC_DRIVE1 1 /* 0 to 11 allowed */
+#define UMC_DRIVE2 1 /* 11 = Fastest Speed */
+#define UMC_DRIVE3 1 /* In case of crash reduce speed */
+
+static u8 current_speeds[4] = {UMC_DRIVE0, UMC_DRIVE1, UMC_DRIVE2, UMC_DRIVE3};
+static const u8 pio_to_umc [5] = {0,3,7,10,11}; /* rough guesses */
+
+/* 0 1 2 3 4 5 6 7 8 9 10 11 */
+static const u8 speedtab [3][12] = {
+ {0xf, 0xb, 0x2, 0x2, 0x2, 0x1, 0x1, 0x1, 0x1, 0x1, 0x1, 0x1 },
+ {0x3, 0x2, 0x2, 0x2, 0x2, 0x2, 0x1, 0x1, 0x1, 0x1, 0x1, 0x1 },
+ {0xff,0xcb,0xc0,0x58,0x36,0x33,0x23,0x22,0x21,0x11,0x10,0x0}};
+
+static void out_umc (char port,char wert)
+{
+ outb_p(port,0x108);
+ outb_p(wert,0x109);
+}
+
+static inline u8 in_umc (char port)
+{
+ outb_p(port,0x108);
+ return inb_p(0x109);
+}
+
+static void umc_set_speeds (u8 speeds[])
+{
+ int i, tmp;
+
+ outb_p(0x5A,0x108); /* enable umc */
+
+ out_umc (0xd7,(speedtab[0][speeds[2]] | (speedtab[0][speeds[3]]<<4)));
+ out_umc (0xd6,(speedtab[0][speeds[0]] | (speedtab[0][speeds[1]]<<4)));
+ tmp = 0;
+ for (i = 3; i >= 0; i--) {
+ tmp = (tmp << 2) | speedtab[1][speeds[i]];
+ }
+ out_umc (0xdc,tmp);
+ for (i = 0;i < 4; i++) {
+ out_umc (0xd0+i,speedtab[2][speeds[i]]);
+ out_umc (0xd8+i,speedtab[2][speeds[i]]);
+ }
+ outb_p(0xa5,0x108); /* disable umc */
+
+ printk ("umc8672: drive speeds [0 to 11]: %d %d %d %d\n",
+ speeds[0], speeds[1], speeds[2], speeds[3]);
+}
+
+static void tune_umc (ide_drive_t *drive, u8 pio)
+{
+ unsigned long flags;
+ ide_hwgroup_t *hwgroup = ide_hwifs[HWIF(drive)->index^1].hwgroup;
+
+ pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
+ printk("%s: setting umc8672 to PIO mode%d (speed %d)\n",
+ drive->name, pio, pio_to_umc[pio]);
+ spin_lock_irqsave(&ide_lock, flags);
+ if (hwgroup && hwgroup->handler != NULL) {
+ printk(KERN_ERR "umc8672: other interface is busy: exiting tune_umc()\n");
+ } else {
+ current_speeds[drive->name[2] - 'a'] = pio_to_umc[pio];
+ umc_set_speeds (current_speeds);
+ }
+ spin_unlock_irqrestore(&ide_lock, flags);
+}
+
+static int __init umc8672_probe(void)
+{
+ unsigned long flags;
+ ide_hwif_t *hwif, *mate;
+
+ if (!request_region(0x108, 2, "umc8672")) {
+ printk(KERN_ERR "umc8672: ports 0x108-0x109 already in use.\n");
+ return 1;
+ }
+ local_irq_save(flags);
+ outb_p(0x5A,0x108); /* enable umc */
+ if (in_umc (0xd5) != 0xa0) {
+ local_irq_restore(flags);
+ printk(KERN_ERR "umc8672: not found\n");
+ release_region(0x108, 2);
+ return 1;
+ }
+ outb_p(0xa5,0x108); /* disable umc */
+
+ umc_set_speeds (current_speeds);
+ local_irq_restore(flags);
+
+ hwif = &ide_hwifs[0];
+ mate = &ide_hwifs[1];
+
+ hwif->chipset = ide_umc8672;
+ hwif->tuneproc = &tune_umc;
+ hwif->mate = mate;
+
+ mate->chipset = ide_umc8672;
+ mate->tuneproc = &tune_umc;
+ mate->mate = hwif;
+ mate->channel = 1;
+
+ probe_hwif_init(hwif);
+ probe_hwif_init(mate);
+
+ create_proc_ide_interfaces();
+
+ return 0;
+}
+
+/* Can be called directly from ide.c. */
+int __init umc8672_init(void)
+{
+ if (umc8672_probe())
+ return -ENODEV;
+ return 0;
+}
+
+#ifdef MODULE
+module_init(umc8672_init);
+#endif
+
+MODULE_AUTHOR("Wolfram Podien");
+MODULE_DESCRIPTION("Support for UMC 8672 IDE chipset");
+MODULE_LICENSE("GPL");