Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/drivers/ide/pci/rz1000.c b/drivers/ide/pci/rz1000.c
new file mode 100644
index 0000000..608cd76
--- /dev/null
+++ b/drivers/ide/pci/rz1000.c
@@ -0,0 +1,91 @@
+/*
+ * linux/drivers/ide/pci/rz1000.c Version 0.06 January 12, 2003
+ *
+ * Copyright (C) 1995-1998 Linus Torvalds & author (see below)
+ */
+
+/*
+ * Principal Author: mlord@pobox.com (Mark Lord)
+ *
+ * See linux/MAINTAINERS for address of current maintainer.
+ *
+ * This file provides support for disabling the buggy read-ahead
+ * mode of the RZ1000 IDE chipset, commonly used on Intel motherboards.
+ *
+ * Dunno if this fixes both ports, or only the primary port (?).
+ */
+
+#undef REALLY_SLOW_IO /* most systems can safely undef this */
+
+#include <linux/config.h> /* for CONFIG_BLK_DEV_IDEPCI */
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/timer.h>
+#include <linux/mm.h>
+#include <linux/ioport.h>
+#include <linux/blkdev.h>
+#include <linux/hdreg.h>
+#include <linux/pci.h>
+#include <linux/ide.h>
+#include <linux/init.h>
+
+#include <asm/io.h>
+
+static void __devinit init_hwif_rz1000 (ide_hwif_t *hwif)
+{
+ u16 reg;
+ struct pci_dev *dev = hwif->pci_dev;
+
+ hwif->chipset = ide_rz1000;
+ if (!pci_read_config_word (dev, 0x40, ®) &&
+ !pci_write_config_word(dev, 0x40, reg & 0xdfff)) {
+ printk(KERN_INFO "%s: disabled chipset read-ahead "
+ "(buggy RZ1000/RZ1001)\n", hwif->name);
+ } else {
+ hwif->serialized = 1;
+ hwif->drives[0].no_unmask = 1;
+ hwif->drives[1].no_unmask = 1;
+ printk(KERN_INFO "%s: serialized, disabled unmasking "
+ "(buggy RZ1000/RZ1001)\n", hwif->name);
+ }
+}
+
+static ide_pci_device_t rz1000_chipset __devinitdata = {
+ .name = "RZ100x",
+ .init_hwif = init_hwif_rz1000,
+ .channels = 2,
+ .autodma = NODMA,
+ .bootable = ON_BOARD,
+};
+
+static int __devinit rz1000_init_one(struct pci_dev *dev, const struct pci_device_id *id)
+{
+ return ide_setup_pci_device(dev, &rz1000_chipset);
+}
+
+static struct pci_device_id rz1000_pci_tbl[] = {
+ { PCI_VENDOR_ID_PCTECH, PCI_DEVICE_ID_PCTECH_RZ1000, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+ { PCI_VENDOR_ID_PCTECH, PCI_DEVICE_ID_PCTECH_RZ1001, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+ { 0, },
+};
+MODULE_DEVICE_TABLE(pci, rz1000_pci_tbl);
+
+static struct pci_driver driver = {
+ .name = "RZ1000_IDE",
+ .id_table = rz1000_pci_tbl,
+ .probe = rz1000_init_one,
+};
+
+static int rz1000_ide_init(void)
+{
+ return ide_pci_register_driver(&driver);
+}
+
+module_init(rz1000_ide_init);
+
+MODULE_AUTHOR("Andre Hedrick");
+MODULE_DESCRIPTION("PCI driver module for RZ1000 IDE");
+MODULE_LICENSE("GPL");
+