Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
diff --git a/drivers/isdn/capi/capidrv.h b/drivers/isdn/capi/capidrv.h
new file mode 100644
index 0000000..1e698e1
--- /dev/null
+++ b/drivers/isdn/capi/capidrv.h
@@ -0,0 +1,140 @@
+/* $Id: capidrv.h,v 1.2.8.2 2001/09/23 22:24:33 kai Exp $
+ *
+ * ISDN4Linux Driver, using capi20 interface (kernelcapi)
+ *
+ * Copyright 1997 by Carsten Paeth <calle@calle.de>
+ *
+ * This software may be used and distributed according to the terms
+ * of the GNU General Public License, incorporated herein by reference.
+ *
+ */
+
+#ifndef __CAPIDRV_H__
+#define __CAPIDRV_H__
+
+/*
+ * LISTEN state machine
+ */
+#define ST_LISTEN_NONE			0	/* L-0 */
+#define ST_LISTEN_WAIT_CONF		1	/* L-0.1 */
+#define ST_LISTEN_ACTIVE		2	/* L-1 */
+#define ST_LISTEN_ACTIVE_WAIT_CONF	3	/* L-1.1 */
+
+
+#define EV_LISTEN_REQ			1	/* L-0 -> L-0.1
+						   L-1 -> L-1.1 */
+#define EV_LISTEN_CONF_ERROR		2	/* L-0.1 -> L-0
+						   L-1.1 -> L-1 */
+#define EV_LISTEN_CONF_EMPTY		3	/* L-0.1 -> L-0
+						   L-1.1 -> L-0 */
+#define EV_LISTEN_CONF_OK		4	/* L-0.1 -> L-1
+						   L-1.1 -> L.1 */
+
+/*
+ * per plci state machine
+ */
+#define ST_PLCI_NONE			0	/* P-0 */
+#define ST_PLCI_OUTGOING 		1	/* P-0.1 */
+#define ST_PLCI_ALLOCATED		2	/* P-1 */
+#define ST_PLCI_ACTIVE			3	/* P-ACT */
+#define ST_PLCI_INCOMING		4	/* P-2 */
+#define ST_PLCI_FACILITY_IND		5	/* P-3 */
+#define ST_PLCI_ACCEPTING		6	/* P-4 */
+#define ST_PLCI_DISCONNECTING		7	/* P-5 */
+#define ST_PLCI_DISCONNECTED		8	/* P-6 */
+#define ST_PLCI_RESUMEING		9	/* P-0.Res */
+#define ST_PLCI_RESUME			10	/* P-Res */
+#define ST_PLCI_HELD			11	/* P-HELD */
+
+#define EV_PLCI_CONNECT_REQ		1	/* P-0 -> P-0.1
+                                                 */
+#define EV_PLCI_CONNECT_CONF_ERROR	2	/* P-0.1 -> P-0
+                                                 */
+#define EV_PLCI_CONNECT_CONF_OK		3	/* P-0.1 -> P-1
+                                                 */
+#define EV_PLCI_FACILITY_IND_UP		4	/* P-0 -> P-1
+                                                 */
+#define EV_PLCI_CONNECT_IND		5	/* P-0 -> P-2
+                                                 */
+#define EV_PLCI_CONNECT_ACTIVE_IND	6	/* P-1 -> P-ACT
+                                                 */
+#define EV_PLCI_CONNECT_REJECT		7	/* P-2 -> P-5
+						   P-3 -> P-5
+						 */
+#define EV_PLCI_DISCONNECT_REQ		8	/* P-1 -> P-5
+						   P-2 -> P-5
+						   P-3 -> P-5
+						   P-4 -> P-5
+						   P-ACT -> P-5
+						   P-Res -> P-5 (*)
+						   P-HELD -> P-5 (*)
+						   */
+#define EV_PLCI_DISCONNECT_IND		9	/* P-1 -> P-6
+						   P-2 -> P-6
+						   P-3 -> P-6
+						   P-4 -> P-6
+						   P-5 -> P-6
+						   P-ACT -> P-6
+						   P-Res -> P-6 (*)
+						   P-HELD -> P-6 (*)
+						   */
+#define EV_PLCI_FACILITY_IND_DOWN	10	/* P-0.1 -> P-5
+						   P-1 -> P-5
+						   P-ACT -> P-5
+						   P-2 -> P-5
+						   P-3 -> P-5
+						   P-4 -> P-5
+						   */
+#define EV_PLCI_DISCONNECT_RESP		11	/* P-6 -> P-0
+                                                   */
+#define EV_PLCI_CONNECT_RESP		12	/* P-6 -> P-0
+                                                   */
+
+#define EV_PLCI_RESUME_REQ		13	/* P-0 -> P-0.Res
+                                                 */
+#define EV_PLCI_RESUME_CONF_OK		14	/* P-0.Res -> P-Res
+                                                 */
+#define EV_PLCI_RESUME_CONF_ERROR	15	/* P-0.Res -> P-0
+                                                 */
+#define EV_PLCI_RESUME_IND		16	/* P-Res -> P-ACT
+                                                 */
+#define EV_PLCI_HOLD_IND		17	/* P-ACT -> P-HELD
+                                                 */
+#define EV_PLCI_RETRIEVE_IND		18	/* P-HELD -> P-ACT
+                                                 */
+#define EV_PLCI_SUSPEND_IND		19	/* P-ACT -> P-5
+                                                 */
+#define EV_PLCI_CD_IND			20	/* P-2 -> P-5
+                                                 */
+
+/*
+ * per ncci state machine
+ */
+#define ST_NCCI_PREVIOUS			-1
+#define ST_NCCI_NONE				0	/* N-0 */
+#define ST_NCCI_OUTGOING			1	/* N-0.1 */
+#define ST_NCCI_INCOMING			2	/* N-1 */
+#define ST_NCCI_ALLOCATED			3	/* N-2 */
+#define ST_NCCI_ACTIVE				4	/* N-ACT */
+#define ST_NCCI_RESETING			5	/* N-3 */
+#define ST_NCCI_DISCONNECTING			6	/* N-4 */
+#define ST_NCCI_DISCONNECTED			7	/* N-5 */
+
+#define EV_NCCI_CONNECT_B3_REQ			1	/* N-0 -> N-0.1 */
+#define EV_NCCI_CONNECT_B3_IND			2	/* N-0 -> N.1 */
+#define EV_NCCI_CONNECT_B3_CONF_OK		3	/* N-0.1 -> N.2 */
+#define EV_NCCI_CONNECT_B3_CONF_ERROR		4	/* N-0.1 -> N.0 */
+#define EV_NCCI_CONNECT_B3_REJECT		5	/* N-1 -> N-4 */
+#define EV_NCCI_CONNECT_B3_RESP			6	/* N-1 -> N-2 */
+#define EV_NCCI_CONNECT_B3_ACTIVE_IND		7	/* N-2 -> N-ACT */
+#define EV_NCCI_RESET_B3_REQ			8	/* N-ACT -> N-3 */
+#define EV_NCCI_RESET_B3_IND			9	/* N-3 -> N-ACT */
+#define EV_NCCI_DISCONNECT_B3_IND		10	/* N-4 -> N.5 */
+#define EV_NCCI_DISCONNECT_B3_CONF_ERROR	11	/* N-4 -> previous */
+#define EV_NCCI_DISCONNECT_B3_REQ		12	/* N-1 -> N-4
+							   N-2 -> N-4
+							   N-3 -> N-4
+							   N-ACT -> N-4 */
+#define EV_NCCI_DISCONNECT_B3_RESP		13	/* N-5 -> N-0 */
+
+#endif				/* __CAPIDRV_H__ */