Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/drivers/isdn/hisax/bkm_ax.h b/drivers/isdn/hisax/bkm_ax.h
new file mode 100644
index 0000000..029e0a2
--- /dev/null
+++ b/drivers/isdn/hisax/bkm_ax.h
@@ -0,0 +1,119 @@
+/* $Id: bkm_ax.h,v 1.5.6.3 2001/09/23 22:24:46 kai Exp $
+ *
+ * low level decls for T-Berkom cards A4T and Scitel Quadro (4*S0, passive)
+ *
+ * Author Roland Klabunde
+ * Copyright by Roland Klabunde <R.Klabunde@Berkom.de>
+ *
+ * This software may be used and distributed according to the terms
+ * of the GNU General Public License, incorporated herein by reference.
+ *
+ */
+
+#ifndef __BKM_AX_H__
+#define __BKM_AX_H__
+
+/* Supported boards (subtypes) */
+#define SCT_1 1
+#define SCT_2 2
+#define SCT_3 3
+#define SCT_4 4
+#define BKM_A4T 5
+
+#define PLX_ADDR_PLX 0x14 /* Addr PLX configuration */
+#define PLX_ADDR_ISAC 0x18 /* Addr ISAC */
+#define PLX_ADDR_HSCX 0x1C /* Addr HSCX */
+#define PLX_ADDR_ALE 0x20 /* Addr ALE */
+#define PLX_ADDR_ALEPLUS 0x24 /* Next Addr behind ALE */
+
+#define PLX_SUBVEN 0x2C /* Offset SubVendor */
+#define PLX_SUBSYS 0x2E /* Offset SubSystem */
+
+
+/* Application specific registers I20 (Siemens SZB6120H) */
+typedef struct {
+ /* Video front end horizontal configuration register */
+ volatile u_int i20VFEHorzCfg; /* Offset 00 */
+ /* Video front end vertical configuration register */
+ volatile u_int i20VFEVertCfg; /* Offset 04 */
+ /* Video front end scaler and pixel format register */
+ volatile u_int i20VFEScaler; /* Offset 08 */
+ /* Video display top register */
+ volatile u_int i20VDispTop; /* Offset 0C */
+ /* Video display bottom register */
+ volatile u_int i20VDispBottom; /* Offset 10 */
+ /* Video stride, status and frame grab register */
+ volatile u_int i20VidFrameGrab;/* Offset 14 */
+ /* Video display configuration register */
+ volatile u_int i20VDispCfg; /* Offset 18 */
+ /* Video masking map top */
+ volatile u_int i20VMaskTop; /* Offset 1C */
+ /* Video masking map bottom */
+ volatile u_int i20VMaskBottom; /* Offset 20 */
+ /* Overlay control register */
+ volatile u_int i20OvlyControl; /* Offset 24 */
+ /* System, PCI and general purpose pins control register */
+ volatile u_int i20SysControl; /* Offset 28 */
+#define sysRESET 0x01000000 /* bit 24:Softreset (Low) */
+ /* GPIO 4...0: Output fixed for our cfg! */
+#define sysCFG 0x000000E0 /* GPIO 7,6,5: Input */
+ /* General purpose pins and guest bus control register */
+ volatile u_int i20GuestControl;/* Offset 2C */
+#define guestWAIT_CFG 0x00005555 /* 4 PCI waits for all */
+#define guestISDN_INT_E 0x01000000 /* ISDN Int en (low) */
+#define guestVID_INT_E 0x02000000 /* Video interrupt en (low) */
+#define guestADI1_INT_R 0x04000000 /* ADI #1 int req (low) */
+#define guestADI2_INT_R 0x08000000 /* ADI #2 int req (low) */
+#define guestISDN_RES 0x10000000 /* ISDN reset bit (high) */
+#define guestADI1_INT_S 0x20000000 /* ADI #1 int pending (low) */
+#define guestADI2_INT_S 0x40000000 /* ADI #2 int pending (low) */
+#define guestISDN_INT_S 0x80000000 /* ISAC int pending (low) */
+
+#define g_A4T_JADE_RES 0x01000000 /* JADE Reset (High) */
+#define g_A4T_ISAR_RES 0x02000000 /* ISAR Reset (High) */
+#define g_A4T_ISAC_RES 0x04000000 /* ISAC Reset (High) */
+#define g_A4T_JADE_BOOTR 0x08000000 /* JADE enable boot SRAM (Low) NOT USED */
+#define g_A4T_ISAR_BOOTR 0x10000000 /* ISAR enable boot SRAM (Low) NOT USED */
+#define g_A4T_JADE_INT_S 0x20000000 /* JADE interrupt pnd (Low) */
+#define g_A4T_ISAR_INT_S 0x40000000 /* ISAR interrupt pnd (Low) */
+#define g_A4T_ISAC_INT_S 0x80000000 /* ISAC interrupt pnd (Low) */
+
+ volatile u_int i20CodeSource; /* Offset 30 */
+ volatile u_int i20CodeXferCtrl;/* Offset 34 */
+ volatile u_int i20CodeMemPtr; /* Offset 38 */
+
+ volatile u_int i20IntStatus; /* Offset 3C */
+ volatile u_int i20IntCtrl; /* Offset 40 */
+#define intISDN 0x40000000 /* GIRQ1En (ISAC/ADI) (High) */
+#define intVID 0x20000000 /* GIRQ0En (VSYNC) (High) */
+#define intCOD 0x10000000 /* CodRepIrqEn (High) */
+#define intPCI 0x01000000 /* PCI IntA enable (High) */
+
+ volatile u_int i20I2CCtrl; /* Offset 44 */
+} I20_REGISTER_FILE, *PI20_REGISTER_FILE;
+
+/*
+ * Postoffice structure for A4T
+ *
+ */
+#define PO_OFFSET 0x00000200 /* Postoffice offset from base */
+
+#define GCS_0 0x00000000 /* Guest bus chip selects */
+#define GCS_1 0x00100000
+#define GCS_2 0x00200000
+#define GCS_3 0x00300000
+
+#define PO_READ 0x00000000 /* R/W from/to guest bus */
+#define PO_WRITE 0x00800000
+
+#define PO_PEND 0x02000000
+
+#define POSTOFFICE(postoffice) *(volatile unsigned int*)(postoffice)
+
+/* Wait unlimited (don't worry) */
+#define __WAITI20__(postoffice) \
+do { \
+ while ((POSTOFFICE(postoffice) & PO_PEND)) ; \
+} while (0)
+
+#endif /* __BKM_AX_H__ */