diff --git a/drivers/media/video/dpc7146.c b/drivers/media/video/dpc7146.c
new file mode 100644
index 0000000..da94811
--- /dev/null
+++ b/drivers/media/video/dpc7146.c
@@ -0,0 +1,401 @@
+/*
+    dpc7146.c - v4l2 driver for the dpc7146 demonstration board
+    
+    Copyright (C) 2000-2003 Michael Hunold <michael@mihu.de>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+*/
+
+#define DEBUG_VARIABLE debug
+
+#include <media/saa7146_vv.h>
+#include <linux/video_decoder.h>	/* for saa7111a */
+
+#define I2C_SAA7111A            0x24
+
+/* All unused bytes are reserverd. */
+#define SAA711X_CHIP_VERSION            0x00
+#define SAA711X_ANALOG_INPUT_CONTROL_1  0x02
+#define SAA711X_ANALOG_INPUT_CONTROL_2  0x03
+#define SAA711X_ANALOG_INPUT_CONTROL_3  0x04
+#define SAA711X_ANALOG_INPUT_CONTROL_4  0x05
+#define SAA711X_HORIZONTAL_SYNC_START   0x06
+#define SAA711X_HORIZONTAL_SYNC_STOP    0x07
+#define SAA711X_SYNC_CONTROL            0x08
+#define SAA711X_LUMINANCE_CONTROL       0x09
+#define SAA711X_LUMINANCE_BRIGHTNESS    0x0A
+#define SAA711X_LUMINANCE_CONTRAST      0x0B
+#define SAA711X_CHROMA_SATURATION       0x0C
+#define SAA711X_CHROMA_HUE_CONTROL      0x0D
+#define SAA711X_CHROMA_CONTROL          0x0E
+#define SAA711X_FORMAT_DELAY_CONTROL    0x10
+#define SAA711X_OUTPUT_CONTROL_1        0x11
+#define SAA711X_OUTPUT_CONTROL_2        0x12
+#define SAA711X_OUTPUT_CONTROL_3        0x13
+#define SAA711X_V_GATE_1_START          0x15
+#define SAA711X_V_GATE_1_STOP           0x16
+#define SAA711X_V_GATE_1_MSB            0x17
+#define SAA711X_TEXT_SLICER_STATUS      0x1A
+#define SAA711X_DECODED_BYTES_OF_TS_1   0x1B
+#define SAA711X_DECODED_BYTES_OF_TS_2   0x1C
+#define SAA711X_STATUS_BYTE             0x1F
+
+#define DPC_BOARD_CAN_DO_VBI(dev)   (dev->revision != 0) 
+
+static int debug = 0;
+module_param(debug, int, 0);
+MODULE_PARM_DESC(debug, "debug verbosity");
+
+static int dpc_num = 0;
+
+#define DPC_INPUTS	2
+static struct v4l2_input dpc_inputs[DPC_INPUTS] = {
+	{ 0, "Port A",	V4L2_INPUT_TYPE_CAMERA,	2, 0, V4L2_STD_PAL_BG|V4L2_STD_NTSC_M, 0 },
+	{ 1, "Port B",	V4L2_INPUT_TYPE_CAMERA,	2, 0, V4L2_STD_PAL_BG|V4L2_STD_NTSC_M, 0 },
+};
+
+#define DPC_AUDIOS	0
+
+static struct saa7146_extension_ioctls ioctls[] = {
+	{ VIDIOC_G_INPUT,	SAA7146_EXCLUSIVE },
+	{ VIDIOC_S_INPUT,	SAA7146_EXCLUSIVE },
+	{ VIDIOC_ENUMINPUT, 	SAA7146_EXCLUSIVE },
+	{ VIDIOC_S_STD,		SAA7146_AFTER },
+	{ 0,			0 }
+};
+
+struct dpc
+{
+	struct video_device	*video_dev;
+	struct video_device	*vbi_dev;
+
+	struct i2c_adapter	i2c_adapter;	
+	struct i2c_client	*saa7111a;
+	
+	int cur_input;	/* current input */
+};
+
+/* fixme: add vbi stuff here */
+static int dpc_probe(struct saa7146_dev* dev)
+{
+	struct dpc* dpc = NULL;	
+	struct i2c_client *client;
+	struct list_head *item;
+
+	dpc = (struct dpc*)kmalloc(sizeof(struct dpc), GFP_KERNEL);
+	if( NULL == dpc ) {
+		printk("dpc_v4l2.o: dpc_probe: not enough kernel memory.\n");
+		return -ENOMEM;
+	}
+	memset(dpc, 0x0, sizeof(struct dpc));	
+
+	/* FIXME: enable i2c-port pins, video-port-pins
+	   video port pins should be enabled here ?! */
+	saa7146_write(dev, MC1, (MASK_08 | MASK_24 | MASK_10 | MASK_26));
+
+	dpc->i2c_adapter = (struct i2c_adapter) {
+		.class = I2C_CLASS_TV_ANALOG,
+		.name = "dpc7146",
+	};
+	saa7146_i2c_adapter_prepare(dev, &dpc->i2c_adapter, SAA7146_I2C_BUS_BIT_RATE_480);
+	if(i2c_add_adapter(&dpc->i2c_adapter) < 0) {
+		DEB_S(("cannot register i2c-device. skipping.\n"));
+		kfree(dpc);
+		return -EFAULT;
+	}
+
+	/* loop through all i2c-devices on the bus and look who is there */
+	list_for_each(item,&dpc->i2c_adapter.clients) {
+		client = list_entry(item, struct i2c_client, list);
+		if( I2C_SAA7111A == client->addr ) 
+			dpc->saa7111a = client;
+	}
+
+	/* check if all devices are present */
+	if( 0 == dpc->saa7111a ) {
+		DEB_D(("dpc_v4l2.o: dpc_attach failed for this device.\n"));	
+		i2c_del_adapter(&dpc->i2c_adapter);
+		kfree(dpc);
+		return -ENODEV;
+	}
+	
+	/* all devices are present, probe was successful */	
+	DEB_D(("dpc_v4l2.o: dpc_probe succeeded for this device.\n"));	
+
+	/* we store the pointer in our private data field */
+	dev->ext_priv = dpc;
+
+	return 0;
+}
+
+/* bring hardware to a sane state. this has to be done, just in case someone
+   wants to capture from this device before it has been properly initialized.
+   the capture engine would badly fail, because no valid signal arrives on the
+   saa7146, thus leading to timeouts and stuff. */
+static int dpc_init_done(struct saa7146_dev* dev)
+{
+	struct dpc* dpc = (struct dpc*)dev->ext_priv;
+
+	DEB_D(("dpc_v4l2.o: dpc_init_done called.\n"));
+
+	/* initialize the helper ics to useful values */
+	i2c_smbus_write_byte_data(dpc->saa7111a, 0x00, 0x11);
+
+	i2c_smbus_write_byte_data(dpc->saa7111a, 0x02, 0xc0);
+	i2c_smbus_write_byte_data(dpc->saa7111a, 0x03, 0x30);
+	i2c_smbus_write_byte_data(dpc->saa7111a, 0x04, 0x00);
+	i2c_smbus_write_byte_data(dpc->saa7111a, 0x05, 0x00);
+	i2c_smbus_write_byte_data(dpc->saa7111a, 0x06, 0xde);
+	i2c_smbus_write_byte_data(dpc->saa7111a, 0x07, 0xad);
+	i2c_smbus_write_byte_data(dpc->saa7111a, 0x08, 0xa8);
+	i2c_smbus_write_byte_data(dpc->saa7111a, 0x09, 0x00);
+	i2c_smbus_write_byte_data(dpc->saa7111a, 0x0a, 0x80);
+	i2c_smbus_write_byte_data(dpc->saa7111a, 0x0b, 0x47);
+	i2c_smbus_write_byte_data(dpc->saa7111a, 0x0c, 0x40);
+	i2c_smbus_write_byte_data(dpc->saa7111a, 0x0d, 0x00);
+	i2c_smbus_write_byte_data(dpc->saa7111a, 0x0e, 0x03);
+
+	i2c_smbus_write_byte_data(dpc->saa7111a, 0x10, 0xd0);
+	i2c_smbus_write_byte_data(dpc->saa7111a, 0x11, 0x1c);
+	i2c_smbus_write_byte_data(dpc->saa7111a, 0x12, 0xc1);
+	i2c_smbus_write_byte_data(dpc->saa7111a, 0x13, 0x30);
+
+	i2c_smbus_write_byte_data(dpc->saa7111a, 0x1f, 0x81);
+
+	return 0;
+}
+
+static struct saa7146_ext_vv vv_data;
+
+/* this function only gets called when the probing was successful */
+static int dpc_attach(struct saa7146_dev* dev, struct saa7146_pci_extension_data *info)
+{
+	struct dpc* dpc = (struct dpc*)dev->ext_priv;
+	
+	DEB_D(("dpc_v4l2.o: dpc_attach called.\n"));
+
+	/* checking for i2c-devices can be omitted here, because we
+	   already did this in "dpc_vl42_probe" */
+
+	saa7146_vv_init(dev,&vv_data);
+	if( 0 != saa7146_register_device(&dpc->video_dev, dev, "dpc", VFL_TYPE_GRABBER)) {
+		ERR(("cannot register capture v4l2 device. skipping.\n"));
+		return -1;
+	}
+	
+	/* initialization stuff (vbi) (only for revision > 0 and for extensions which want it)*/
+	if( 0 != DPC_BOARD_CAN_DO_VBI(dev)) {
+		if( 0 != saa7146_register_device(&dpc->vbi_dev, dev, "dpc", VFL_TYPE_VBI)) {
+			ERR(("cannot register vbi v4l2 device. skipping.\n"));
+		}
+	}
+
+	i2c_use_client(dpc->saa7111a);
+
+	printk("dpc: found 'dpc7146 demonstration board'-%d.\n",dpc_num);
+	dpc_num++;
+	
+	/* the rest */
+	dpc->cur_input = 0;
+	dpc_init_done(dev);
+	
+	return 0;
+}
+
+static int dpc_detach(struct saa7146_dev* dev)
+{
+	struct dpc* dpc = (struct dpc*)dev->ext_priv;
+	
+	DEB_EE(("dev:%p\n",dev));
+
+	i2c_release_client(dpc->saa7111a);
+
+	saa7146_unregister_device(&dpc->video_dev,dev);
+	if( 0 != DPC_BOARD_CAN_DO_VBI(dev)) {
+		saa7146_unregister_device(&dpc->vbi_dev,dev);
+	}
+	saa7146_vv_release(dev);
+
+	dpc_num--;
+
+	i2c_del_adapter(&dpc->i2c_adapter);
+	kfree(dpc);
+	return 0;
+}
+
+#ifdef axa
+int dpc_vbi_bypass(struct saa7146_dev* dev)
+{
+	struct dpc* dpc = (struct dpc*)dev->ext_priv;
+	
+	int i = 1;
+
+	/* switch bypass in saa7111a */
+	if ( 0 != dpc->saa7111a->driver->command(dpc->saa7111a,SAA711X_VBI_BYPASS, &i)) {
+		printk("dpc_v4l2.o: VBI_BYPASS: could not address saa7111a.\n");
+		return -1;
+	}			
+
+	return 0;
+}
+#endif
+
+static int dpc_ioctl(struct saa7146_fh *fh, unsigned int cmd, void *arg) 
+{
+	struct saa7146_dev *dev = fh->dev;
+	struct dpc* dpc = (struct dpc*)dev->ext_priv;
+/*
+	struct saa7146_vv *vv = dev->vv_data; 
+*/
+	switch(cmd)
+	{
+	case VIDIOC_ENUMINPUT:
+	{
+		struct v4l2_input *i = arg;
+		DEB_EE(("VIDIOC_ENUMINPUT %d.\n",i->index));
+		
+		if( i->index < 0 || i->index >= DPC_INPUTS) {
+			return -EINVAL;
+		}
+		
+		memcpy(i, &dpc_inputs[i->index], sizeof(struct v4l2_input));
+
+		DEB_D(("dpc_v4l2.o: v4l2_ioctl: VIDIOC_ENUMINPUT %d.\n",i->index));
+		return 0;
+	}
+	case VIDIOC_G_INPUT:
+	{
+		int *input = (int *)arg;
+		*input = dpc->cur_input;
+
+		DEB_D(("dpc_v4l2.o: VIDIOC_G_INPUT: %d\n",*input));
+		return 0;
+	}
+	case VIDIOC_S_INPUT:
+	{
+		int	input = *(int *)arg;
+
+		if (input < 0 || input >= DPC_INPUTS) {
+			return -EINVAL;
+		}
+	
+		dpc->cur_input = input;
+
+		/* fixme: switch input here, switch audio, too! */
+//		saa7146_set_hps_source_and_sync(dev, input_port_selection[input].hps_source, input_port_selection[input].hps_sync);
+		printk("dpc_v4l2.o: VIDIOC_S_INPUT: fixme switch input.\n");
+		
+		return 0;
+	}
+	default:
+/*
+		DEB_D(("dpc_v4l2.o: v4l2_ioctl does not handle this ioctl.\n"));
+*/
+		return -ENOIOCTLCMD;
+	}
+	return 0;
+}
+
+static int std_callback(struct saa7146_dev* dev, struct saa7146_standard *std)
+{
+	return 0;
+}
+
+static struct saa7146_standard standard[] = {
+	{
+		.name	= "PAL", 	.id	= V4L2_STD_PAL,
+		.v_offset	= 0x17,	.v_field 	= 288,
+		.h_offset	= 0x14,	.h_pixels 	= 680,
+		.v_max_out	= 576,	.h_max_out	= 768,
+	}, {
+		.name	= "NTSC", 	.id	= V4L2_STD_NTSC,
+		.v_offset	= 0x16,	.v_field 	= 240,
+		.h_offset	= 0x06,	.h_pixels 	= 708,
+		.v_max_out	= 480,	.h_max_out	= 640,
+	}, {
+		.name	= "SECAM", 	.id	= V4L2_STD_SECAM,
+		.v_offset	= 0x14,	.v_field 	= 288,
+		.h_offset	= 0x14,	.h_pixels 	= 720,
+		.v_max_out	= 576,	.h_max_out	= 768,
+	}
+};
+
+static struct saa7146_extension extension;
+
+static struct saa7146_pci_extension_data dpc = {
+        .ext_priv = "Multimedia eXtension Board",
+        .ext = &extension,
+};
+
+static struct pci_device_id pci_tbl[] = {
+	{
+		.vendor    = PCI_VENDOR_ID_PHILIPS,
+		.device	   = PCI_DEVICE_ID_PHILIPS_SAA7146,
+		.subvendor = 0x0000,
+		.subdevice = 0x0000,
+		.driver_data = (unsigned long)&dpc,
+	}, {
+		.vendor = 0,
+	}
+};
+
+MODULE_DEVICE_TABLE(pci, pci_tbl);
+
+static struct saa7146_ext_vv vv_data = {
+	.inputs		= DPC_INPUTS,
+	.capabilities	= V4L2_CAP_VBI_CAPTURE,
+	.stds		= &standard[0],
+	.num_stds	= sizeof(standard)/sizeof(struct saa7146_standard),
+	.std_callback	= &std_callback, 
+	.ioctls		= &ioctls[0],
+	.ioctl		= dpc_ioctl,
+};
+
+static struct saa7146_extension extension = {
+	.name		= "dpc7146 demonstration board",
+	.flags		= SAA7146_USE_I2C_IRQ,
+	
+	.pci_tbl	= &pci_tbl[0],
+	.module		= THIS_MODULE,
+
+	.probe		= dpc_probe,
+	.attach		= dpc_attach,
+	.detach		= dpc_detach,
+
+	.irq_mask	= 0,
+	.irq_func	= NULL,
+};	
+
+static int __init dpc_init_module(void)
+{
+	if( 0 != saa7146_register_extension(&extension)) {
+		DEB_S(("failed to register extension.\n"));
+		return -ENODEV;
+	}
+	
+	return 0;
+}
+
+static void __exit dpc_cleanup_module(void)
+{
+	saa7146_unregister_extension(&extension);
+}
+
+module_init(dpc_init_module);
+module_exit(dpc_cleanup_module);
+
+MODULE_DESCRIPTION("video4linux-2 driver for the 'dpc7146 demonstration board'");
+MODULE_AUTHOR("Michael Hunold <michael@mihu.de>");
+MODULE_LICENSE("GPL");