diff --git a/drivers/media/video/zr36060.c b/drivers/media/video/zr36060.c
new file mode 100644
index 0000000..b50dc40
--- /dev/null
+++ b/drivers/media/video/zr36060.c
@@ -0,0 +1,1016 @@
+/*
+ * Zoran ZR36060 basic configuration functions
+ *
+ * Copyright (C) 2002 Laurent Pinchart <laurent.pinchart@skynet.be>
+ *
+ * $Id: zr36060.c,v 1.1.2.22 2003/05/06 09:35:36 rbultje Exp $
+ *
+ * ------------------------------------------------------------------------
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * ------------------------------------------------------------------------
+ */
+
+#define ZR060_VERSION "v0.7"
+
+#include <linux/version.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+
+#include <linux/types.h>
+#include <linux/wait.h>
+
+/* includes for structures and defines regarding video 
+   #include<linux/videodev.h> */
+
+/* I/O commands, error codes */
+#include<asm/io.h>
+//#include<errno.h>
+
+/* headerfile of this module */
+#include"zr36060.h"
+
+/* codec io API */
+#include"videocodec.h"
+
+/* it doesn't make sense to have more than 20 or so,
+  just to prevent some unwanted loops */
+#define MAX_CODECS 20
+
+/* amount of chips attached via this driver */
+static int zr36060_codecs = 0;
+
+static int low_bitrate = 0;
+module_param(low_bitrate, bool, 0);
+MODULE_PARM_DESC(low_bitrate, "Buz compatibility option, halves bitrate");
+
+/* debugging is available via module parameter */
+static int debug = 0;
+module_param(debug, int, 0);
+MODULE_PARM_DESC(debug, "Debug level (0-4)");
+
+#define dprintk(num, format, args...) \
+	do { \
+		if (debug >= num) \
+			printk(format, ##args); \
+	} while (0)
+
+/* =========================================================================
+   Local hardware I/O functions:
+
+   read/write via codec layer (registers are located in the master device)
+   ========================================================================= */
+
+/* read and write functions */
+static u8
+zr36060_read (struct zr36060 *ptr,
+	      u16             reg)
+{
+	u8 value = 0;
+
+	// just in case something is wrong...
+	if (ptr->codec->master_data->readreg)
+		value = (ptr->codec->master_data->readreg(ptr->codec,
+							  reg)) & 0xff;
+	else
+		dprintk(1,
+			KERN_ERR "%s: invalid I/O setup, nothing read!\n",
+			ptr->name);
+
+	//dprintk(4, "%s: reading from 0x%04x: %02x\n",ptr->name,reg,value);
+
+	return value;
+}
+
+static void
+zr36060_write(struct zr36060 *ptr,
+	      u16             reg,
+	      u8              value)
+{
+	//dprintk(4, "%s: writing 0x%02x to 0x%04x\n",ptr->name,value,reg);
+	dprintk(4, "0x%02x @0x%04x\n", value, reg);
+
+	// just in case something is wrong...
+	if (ptr->codec->master_data->writereg)
+		ptr->codec->master_data->writereg(ptr->codec, reg, value);
+	else
+		dprintk(1,
+			KERN_ERR
+			"%s: invalid I/O setup, nothing written!\n",
+			ptr->name);
+}
+
+/* =========================================================================
+   Local helper function:
+
+   status read
+   ========================================================================= */
+
+/* status is kept in datastructure */
+static u8
+zr36060_read_status (struct zr36060 *ptr)
+{
+	ptr->status = zr36060_read(ptr, ZR060_CFSR);
+
+	zr36060_read(ptr, 0);
+	return ptr->status;
+}
+
+/* =========================================================================
+   Local helper function:
+
+   scale factor read
+   ========================================================================= */
+
+/* scale factor is kept in datastructure */
+static u16
+zr36060_read_scalefactor (struct zr36060 *ptr)
+{
+	ptr->scalefact = (zr36060_read(ptr, ZR060_SF_HI) << 8) |
+			 (zr36060_read(ptr, ZR060_SF_LO) & 0xFF);
+
+	/* leave 0 selected for an eventually GO from master */
+	zr36060_read(ptr, 0);
+	return ptr->scalefact;
+}
+
+/* =========================================================================
+   Local helper function:
+
+   wait if codec is ready to proceed (end of processing) or time is over
+   ========================================================================= */
+
+static void
+zr36060_wait_end (struct zr36060 *ptr)
+{
+	int i = 0;
+
+	while (zr36060_read_status(ptr) & ZR060_CFSR_Busy) {
+		udelay(1);
+		if (i++ > 200000) {	// 200ms, there is for shure something wrong!!!
+			dprintk(1,
+				"%s: timout at wait_end (last status: 0x%02x)\n",
+				ptr->name, ptr->status);
+			break;
+		}
+	}
+}
+
+/* =========================================================================
+   Local helper function:
+
+   basic test of "connectivity", writes/reads to/from memory the SOF marker 
+   ========================================================================= */
+
+static int
+zr36060_basic_test (struct zr36060 *ptr)
+{
+	if ((zr36060_read(ptr, ZR060_IDR_DEV) != 0x33) &&
+	    (zr36060_read(ptr, ZR060_IDR_REV) != 0x01)) {
+		dprintk(1,
+			KERN_ERR
+			"%s: attach failed, can't connect to jpeg processor!\n",
+			ptr->name);
+		return -ENXIO;
+	}
+
+	zr36060_wait_end(ptr);
+	if (ptr->status & ZR060_CFSR_Busy) {
+		dprintk(1,
+			KERN_ERR
+			"%s: attach failed, jpeg processor failed (end flag)!\n",
+			ptr->name);
+		return -EBUSY;
+	}
+
+	return 0;		/* looks good! */
+}
+
+/* =========================================================================
+   Local helper function:
+
+   simple loop for pushing the init datasets
+   ========================================================================= */
+
+static int
+zr36060_pushit (struct zr36060 *ptr,
+	        u16             startreg,
+	        u16             len,
+	        const char     *data)
+{
+	int i = 0;
+
+	dprintk(4, "%s: write data block to 0x%04x (len=%d)\n", ptr->name,
+		startreg, len);
+	while (i < len) {
+		zr36060_write(ptr, startreg++, data[i++]);
+	}
+
+	return i;
+}
+
+/* =========================================================================
+   Basic datasets:
+
+   jpeg baseline setup data (you find it on lots places in internet, or just
+   extract it from any regular .jpg image...)
+
+   Could be variable, but until it's not needed it they are just fixed to save
+   memory. Otherwise expand zr36060 structure with arrays, push the values to
+   it and initalize from there, as e.g. the linux zr36057/60 driver does it.
+   ========================================================================= */
+
+static const char zr36060_dqt[0x86] = {
+	0xff, 0xdb,		//Marker: DQT
+	0x00, 0x84,		//Length: 2*65+2
+	0x00,			//Pq,Tq first table
+	0x10, 0x0b, 0x0c, 0x0e, 0x0c, 0x0a, 0x10, 0x0e,
+	0x0d, 0x0e, 0x12, 0x11, 0x10, 0x13, 0x18, 0x28,
+	0x1a, 0x18, 0x16, 0x16, 0x18, 0x31, 0x23, 0x25,
+	0x1d, 0x28, 0x3a, 0x33, 0x3d, 0x3c, 0x39, 0x33,
+	0x38, 0x37, 0x40, 0x48, 0x5c, 0x4e, 0x40, 0x44,
+	0x57, 0x45, 0x37, 0x38, 0x50, 0x6d, 0x51, 0x57,
+	0x5f, 0x62, 0x67, 0x68, 0x67, 0x3e, 0x4d, 0x71,
+	0x79, 0x70, 0x64, 0x78, 0x5c, 0x65, 0x67, 0x63,
+	0x01,			//Pq,Tq second table
+	0x11, 0x12, 0x12, 0x18, 0x15, 0x18, 0x2f, 0x1a,
+	0x1a, 0x2f, 0x63, 0x42, 0x38, 0x42, 0x63, 0x63,
+	0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63,
+	0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63,
+	0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63,
+	0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63,
+	0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63,
+	0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63, 0x63
+};
+
+static const char zr36060_dht[0x1a4] = {
+	0xff, 0xc4,		//Marker: DHT
+	0x01, 0xa2,		//Length: 2*AC, 2*DC
+	0x00,			//DC first table
+	0x00, 0x01, 0x05, 0x01, 0x01, 0x01, 0x01, 0x01,
+	0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01,
+	0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, 0x09, 0x0A, 0x0B,
+	0x01,			//DC second table
+	0x00, 0x03, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
+	0x01, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01,
+	0x02, 0x03, 0x04, 0x05, 0x06, 0x07, 0x08, 0x09, 0x0A, 0x0B,
+	0x10,			//AC first table
+	0x00, 0x02, 0x01, 0x03, 0x03, 0x02, 0x04, 0x03,
+	0x05, 0x05, 0x04, 0x04, 0x00, 0x00,
+	0x01, 0x7D, 0x01, 0x02, 0x03, 0x00, 0x04, 0x11,
+	0x05, 0x12, 0x21, 0x31, 0x41, 0x06, 0x13, 0x51, 0x61,
+	0x07, 0x22, 0x71, 0x14, 0x32, 0x81, 0x91, 0xA1,
+	0x08, 0x23, 0x42, 0xB1, 0xC1, 0x15, 0x52, 0xD1, 0xF0, 0x24,
+	0x33, 0x62, 0x72, 0x82, 0x09, 0x0A, 0x16, 0x17,
+	0x18, 0x19, 0x1A, 0x25, 0x26, 0x27, 0x28, 0x29, 0x2A, 0x34,
+	0x35, 0x36, 0x37, 0x38, 0x39, 0x3A, 0x43, 0x44,
+	0x45, 0x46, 0x47, 0x48, 0x49, 0x4A, 0x53, 0x54, 0x55, 0x56,
+	0x57, 0x58, 0x59, 0x5A, 0x63, 0x64, 0x65, 0x66,
+	0x67, 0x68, 0x69, 0x6A, 0x73, 0x74, 0x75, 0x76, 0x77, 0x78,
+	0x79, 0x7A, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88,
+	0x89, 0x8A, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97, 0x98, 0x99,
+	0x9A, 0xA2, 0xA3, 0xA4, 0xA5, 0xA6, 0xA7, 0xA8,
+	0xA9, 0xAA, 0xB2, 0xB3, 0xB4, 0xB5, 0xB6, 0xB7, 0xB8, 0xB9,
+	0xBA, 0xC2, 0xC3, 0xC4, 0xC5, 0xC6, 0xC7, 0xC8,
+	0xC9, 0xCA, 0xD2, 0xD3, 0xD4, 0xD5, 0xD6, 0xD7, 0xD8, 0xD9,
+	0xDA, 0xE1, 0xE2, 0xE3, 0xE4, 0xE5, 0xE6, 0xE7,
+	0xE8, 0xE9, 0xEA, 0xF1, 0xF2, 0xF3, 0xF4, 0xF5, 0xF6, 0xF7,
+	0xF8, 0xF9, 0xFA,
+	0x11,			//AC second table
+	0x00, 0x02, 0x01, 0x02, 0x04, 0x04, 0x03, 0x04,
+	0x07, 0x05, 0x04, 0x04, 0x00, 0x01,
+	0x02, 0x77, 0x00, 0x01, 0x02, 0x03, 0x11, 0x04,
+	0x05, 0x21, 0x31, 0x06, 0x12, 0x41, 0x51, 0x07, 0x61, 0x71,
+	0x13, 0x22, 0x32, 0x81, 0x08, 0x14, 0x42, 0x91,
+	0xA1, 0xB1, 0xC1, 0x09, 0x23, 0x33, 0x52, 0xF0, 0x15, 0x62,
+	0x72, 0xD1, 0x0A, 0x16, 0x24, 0x34, 0xE1, 0x25,
+	0xF1, 0x17, 0x18, 0x19, 0x1A, 0x26, 0x27, 0x28, 0x29, 0x2A,
+	0x35, 0x36, 0x37, 0x38, 0x39, 0x3A, 0x43, 0x44,
+	0x45, 0x46, 0x47, 0x48, 0x49, 0x4A, 0x53, 0x54, 0x55, 0x56,
+	0x57, 0x58, 0x59, 0x5A, 0x63, 0x64, 0x65, 0x66,
+	0x67, 0x68, 0x69, 0x6A, 0x73, 0x74, 0x75, 0x76, 0x77, 0x78,
+	0x79, 0x7A, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87,
+	0x88, 0x89, 0x8A, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97, 0x98,
+	0x99, 0x9A, 0xA2, 0xA3, 0xA4, 0xA5, 0xA6, 0xA7,
+	0xA8, 0xA9, 0xAA, 0xB2, 0xB3, 0xB4, 0xB5, 0xB6, 0xB7, 0xB8,
+	0xB9, 0xBA, 0xC2, 0xC3, 0xC4, 0xC5, 0xC6, 0xC7,
+	0xC8, 0xC9, 0xCA, 0xD2, 0xD3, 0xD4, 0xD5, 0xD6, 0xD7, 0xD8,
+	0xD9, 0xDA, 0xE2, 0xE3, 0xE4, 0xE5, 0xE6, 0xE7,
+	0xE8, 0xE9, 0xEA, 0xF2, 0xF3, 0xF4, 0xF5, 0xF6, 0xF7, 0xF8,
+	0xF9, 0xFA
+};
+
+/* jpeg baseline setup, this is just fixed in this driver (YUV pictures) */
+#define NO_OF_COMPONENTS          0x3	//Y,U,V
+#define BASELINE_PRECISION        0x8	//MCU size (?)
+static const char zr36060_tq[8] = { 0, 1, 1, 0, 0, 0, 0, 0 };	//table idx's QT
+static const char zr36060_td[8] = { 0, 1, 1, 0, 0, 0, 0, 0 };	//table idx's DC
+static const char zr36060_ta[8] = { 0, 1, 1, 0, 0, 0, 0, 0 };	//table idx's AC
+
+/* horizontal 422 decimation setup (maybe we support 411 or so later, too) */
+static const char zr36060_decimation_h[8] = { 2, 1, 1, 0, 0, 0, 0, 0 };
+static const char zr36060_decimation_v[8] = { 1, 1, 1, 0, 0, 0, 0, 0 };
+
+/* =========================================================================
+   Local helper functions:
+
+   calculation and setup of parameter-dependent JPEG baseline segments
+   (needed for compression only)
+   ========================================================================= */
+
+/* ------------------------------------------------------------------------- */
+
+/* SOF (start of frame) segment depends on width, height and sampling ratio
+                         of each color component */
+
+static int
+zr36060_set_sof (struct zr36060 *ptr)
+{
+	char sof_data[34];	// max. size of register set
+	int i;
+
+	dprintk(3, "%s: write SOF (%dx%d, %d components)\n", ptr->name,
+		ptr->width, ptr->height, NO_OF_COMPONENTS);
+	sof_data[0] = 0xff;
+	sof_data[1] = 0xc0;
+	sof_data[2] = 0x00;
+	sof_data[3] = (3 * NO_OF_COMPONENTS) + 8;
+	sof_data[4] = BASELINE_PRECISION;	// only '8' possible with zr36060
+	sof_data[5] = (ptr->height) >> 8;
+	sof_data[6] = (ptr->height) & 0xff;
+	sof_data[7] = (ptr->width) >> 8;
+	sof_data[8] = (ptr->width) & 0xff;
+	sof_data[9] = NO_OF_COMPONENTS;
+	for (i = 0; i < NO_OF_COMPONENTS; i++) {
+		sof_data[10 + (i * 3)] = i;	// index identifier
+		sof_data[11 + (i * 3)] = (ptr->h_samp_ratio[i] << 4) |
+					 (ptr->v_samp_ratio[i]); // sampling ratios
+		sof_data[12 + (i * 3)] = zr36060_tq[i];	// Q table selection
+	}
+	return zr36060_pushit(ptr, ZR060_SOF_IDX,
+			      (3 * NO_OF_COMPONENTS) + 10, sof_data);
+}
+
+/* ------------------------------------------------------------------------- */
+
+/* SOS (start of scan) segment depends on the used scan components 
+                        of each color component */
+
+static int
+zr36060_set_sos (struct zr36060 *ptr)
+{
+	char sos_data[16];	// max. size of register set
+	int i;
+
+	dprintk(3, "%s: write SOS\n", ptr->name);
+	sos_data[0] = 0xff;
+	sos_data[1] = 0xda;
+	sos_data[2] = 0x00;
+	sos_data[3] = 2 + 1 + (2 * NO_OF_COMPONENTS) + 3;
+	sos_data[4] = NO_OF_COMPONENTS;
+	for (i = 0; i < NO_OF_COMPONENTS; i++) {
+		sos_data[5 + (i * 2)] = i;	// index
+		sos_data[6 + (i * 2)] = (zr36060_td[i] << 4) |
+				        zr36060_ta[i]; // AC/DC tbl.sel.
+	}
+	sos_data[2 + 1 + (2 * NO_OF_COMPONENTS) + 2] = 00;	// scan start
+	sos_data[2 + 1 + (2 * NO_OF_COMPONENTS) + 3] = 0x3f;
+	sos_data[2 + 1 + (2 * NO_OF_COMPONENTS) + 4] = 00;
+	return zr36060_pushit(ptr, ZR060_SOS_IDX,
+			      4 + 1 + (2 * NO_OF_COMPONENTS) + 3,
+			      sos_data);
+}
+
+/* ------------------------------------------------------------------------- */
+
+/* DRI (define restart interval) */
+
+static int
+zr36060_set_dri (struct zr36060 *ptr)
+{
+	char dri_data[6];	// max. size of register set
+
+	dprintk(3, "%s: write DRI\n", ptr->name);
+	dri_data[0] = 0xff;
+	dri_data[1] = 0xdd;
+	dri_data[2] = 0x00;
+	dri_data[3] = 0x04;
+	dri_data[4] = (ptr->dri) >> 8;
+	dri_data[5] = (ptr->dri) & 0xff;
+	return zr36060_pushit(ptr, ZR060_DRI_IDX, 6, dri_data);
+}
+
+/* =========================================================================
+   Setup function:
+
+   Setup compression/decompression of Zoran's JPEG processor
+   ( see also zoran 36060 manual )
+
+   ... sorry for the spaghetti code ...
+   ========================================================================= */
+static void
+zr36060_init (struct zr36060 *ptr)
+{
+	int sum = 0;
+	long bitcnt, tmp;
+
+	if (ptr->mode == CODEC_DO_COMPRESSION) {
+		dprintk(2, "%s: COMPRESSION SETUP\n", ptr->name);
+
+		zr36060_write(ptr, ZR060_LOAD, ZR060_LOAD_SyncRst);
+
+		/* 060 communicates with 067 in master mode */
+		zr36060_write(ptr, ZR060_CIR, ZR060_CIR_CodeMstr);
+
+		/* Compression with or without variable scale factor */
+		/*FIXME: What about ptr->bitrate_ctrl? */
+		zr36060_write(ptr, ZR060_CMR,
+			      ZR060_CMR_Comp | ZR060_CMR_Pass2 |
+			      ZR060_CMR_BRB);
+
+		/* Must be zero */
+		zr36060_write(ptr, ZR060_MBZ, 0x00);
+		zr36060_write(ptr, ZR060_TCR_HI, 0x00);
+		zr36060_write(ptr, ZR060_TCR_LO, 0x00);
+
+		/* Disable all IRQs - no DataErr means autoreset */
+		zr36060_write(ptr, ZR060_IMR, 0);
+
+		/* volume control settings */
+		zr36060_write(ptr, ZR060_SF_HI, ptr->scalefact >> 8);
+		zr36060_write(ptr, ZR060_SF_LO, ptr->scalefact & 0xff);
+
+		zr36060_write(ptr, ZR060_AF_HI, 0xff);
+		zr36060_write(ptr, ZR060_AF_M, 0xff);
+		zr36060_write(ptr, ZR060_AF_LO, 0xff);
+
+		/* setup the variable jpeg tables */
+		sum += zr36060_set_sof(ptr);
+		sum += zr36060_set_sos(ptr);
+		sum += zr36060_set_dri(ptr);
+
+		/* setup the fixed jpeg tables - maybe variable, though -
+		 * (see table init section above) */
+		sum +=
+		    zr36060_pushit(ptr, ZR060_DQT_IDX, sizeof(zr36060_dqt),
+				   zr36060_dqt);
+		sum +=
+		    zr36060_pushit(ptr, ZR060_DHT_IDX, sizeof(zr36060_dht),
+				   zr36060_dht);
+		zr36060_write(ptr, ZR060_APP_IDX, 0xff);
+		zr36060_write(ptr, ZR060_APP_IDX + 1, 0xe0 + ptr->app.appn);
+		zr36060_write(ptr, ZR060_APP_IDX + 2, 0x00);
+		zr36060_write(ptr, ZR060_APP_IDX + 3, ptr->app.len + 2);
+		sum += zr36060_pushit(ptr, ZR060_APP_IDX + 4, 60,
+				      ptr->app.data) + 4;
+		zr36060_write(ptr, ZR060_COM_IDX, 0xff);
+		zr36060_write(ptr, ZR060_COM_IDX + 1, 0xfe);
+		zr36060_write(ptr, ZR060_COM_IDX + 2, 0x00);
+		zr36060_write(ptr, ZR060_COM_IDX + 3, ptr->com.len + 2);
+		sum += zr36060_pushit(ptr, ZR060_COM_IDX + 4, 60,
+				      ptr->com.data) + 4;
+
+		/* setup misc. data for compression (target code sizes) */
+
+		/* size of compressed code to reach without header data */
+		sum = ptr->real_code_vol - sum;
+		bitcnt = sum << 3;	/* need the size in bits */
+
+		tmp = bitcnt >> 16;
+		dprintk(3,
+			"%s: code: csize=%d, tot=%d, bit=%ld, highbits=%ld\n",
+			ptr->name, sum, ptr->real_code_vol, bitcnt, tmp);
+		zr36060_write(ptr, ZR060_TCV_NET_HI, tmp >> 8);
+		zr36060_write(ptr, ZR060_TCV_NET_MH, tmp & 0xff);
+		tmp = bitcnt & 0xffff;
+		zr36060_write(ptr, ZR060_TCV_NET_ML, tmp >> 8);
+		zr36060_write(ptr, ZR060_TCV_NET_LO, tmp & 0xff);
+
+		bitcnt -= bitcnt >> 7;	// bits without stuffing
+		bitcnt -= ((bitcnt * 5) >> 6);	// bits without eob
+
+		tmp = bitcnt >> 16;
+		dprintk(3, "%s: code: nettobit=%ld, highnettobits=%ld\n",
+			ptr->name, bitcnt, tmp);
+		zr36060_write(ptr, ZR060_TCV_DATA_HI, tmp >> 8);
+		zr36060_write(ptr, ZR060_TCV_DATA_MH, tmp & 0xff);
+		tmp = bitcnt & 0xffff;
+		zr36060_write(ptr, ZR060_TCV_DATA_ML, tmp >> 8);
+		zr36060_write(ptr, ZR060_TCV_DATA_LO, tmp & 0xff);
+
+		/* JPEG markers to be included in the compressed stream */
+		zr36060_write(ptr, ZR060_MER,
+			      ZR060_MER_DQT | ZR060_MER_DHT |
+			      ((ptr->com.len > 0) ? ZR060_MER_Com : 0) |
+			      ((ptr->app.len > 0) ? ZR060_MER_App : 0));
+
+		/* Setup the Video Frontend */
+		/* Limit pixel range to 16..235 as per CCIR-601 */
+		zr36060_write(ptr, ZR060_VCR, ZR060_VCR_Range);
+
+	} else {
+		dprintk(2, "%s: EXPANSION SETUP\n", ptr->name);
+
+		zr36060_write(ptr, ZR060_LOAD, ZR060_LOAD_SyncRst);
+
+		/* 060 communicates with 067 in master mode */
+		zr36060_write(ptr, ZR060_CIR, ZR060_CIR_CodeMstr);
+
+		/* Decompression */
+		zr36060_write(ptr, ZR060_CMR, 0);
+
+		/* Must be zero */
+		zr36060_write(ptr, ZR060_MBZ, 0x00);
+		zr36060_write(ptr, ZR060_TCR_HI, 0x00);
+		zr36060_write(ptr, ZR060_TCR_LO, 0x00);
+
+		/* Disable all IRQs - no DataErr means autoreset */
+		zr36060_write(ptr, ZR060_IMR, 0);
+
+		/* setup misc. data for expansion */
+		zr36060_write(ptr, ZR060_MER, 0);
+
+		/* setup the fixed jpeg tables - maybe variable, though -
+		 * (see table init section above) */
+		zr36060_pushit(ptr, ZR060_DHT_IDX, sizeof(zr36060_dht),
+			       zr36060_dht);
+
+		/* Setup the Video Frontend */
+		//zr36060_write(ptr, ZR060_VCR, ZR060_VCR_FIExt);
+		//this doesn't seem right and doesn't work...
+		zr36060_write(ptr, ZR060_VCR, ZR060_VCR_Range);
+	}
+
+	/* Load the tables */
+	zr36060_write(ptr, ZR060_LOAD,
+		      ZR060_LOAD_SyncRst | ZR060_LOAD_Load);
+	zr36060_wait_end(ptr);
+	dprintk(2, "%s: Status after table preload: 0x%02x\n", ptr->name,
+		ptr->status);
+
+	if (ptr->status & ZR060_CFSR_Busy) {
+		dprintk(1, KERN_ERR "%s: init aborted!\n", ptr->name);
+		return;		// something is wrong, its timed out!!!!
+	}
+}
+
+/* =========================================================================
+   CODEC API FUNCTIONS
+
+   this functions are accessed by the master via the API structure
+   ========================================================================= */
+
+/* set compression/expansion mode and launches codec -
+   this should be the last call from the master before starting processing */
+static int
+zr36060_set_mode (struct videocodec *codec,
+		  int                mode)
+{
+	struct zr36060 *ptr = (struct zr36060 *) codec->data;
+
+	dprintk(2, "%s: set_mode %d call\n", ptr->name, mode);
+
+	if ((mode != CODEC_DO_EXPANSION) && (mode != CODEC_DO_COMPRESSION))
+		return -EINVAL;
+
+	ptr->mode = mode;
+	zr36060_init(ptr);
+
+	return 0;
+}
+
+/* set picture size (norm is ignored as the codec doesn't know about it) */
+static int
+zr36060_set_video (struct videocodec   *codec,
+		   struct tvnorm       *norm,
+		   struct vfe_settings *cap,
+		   struct vfe_polarity *pol)
+{
+	struct zr36060 *ptr = (struct zr36060 *) codec->data;
+	u32 reg;
+	int size;
+
+	dprintk(2, "%s: set_video %d/%d-%dx%d (%%%d) call\n", ptr->name,
+		cap->x, cap->y, cap->width, cap->height, cap->decimation);
+
+	/* if () return -EINVAL;
+	 * trust the master driver that it knows what it does - so
+	 * we allow invalid startx/y and norm for now ... */
+	ptr->width = cap->width / (cap->decimation & 0xff);
+	ptr->height = cap->height / (cap->decimation >> 8);
+
+	zr36060_write(ptr, ZR060_LOAD, ZR060_LOAD_SyncRst);
+
+	/* Note that VSPol/HSPol bits in zr36060 have the opposite
+	 * meaning of their zr360x7 counterparts with the same names
+	 * N.b. for VSPol this is only true if FIVEdge = 0 (default,
+	 * left unchanged here - in accordance with datasheet).
+	*/
+	reg = (!pol->vsync_pol ? ZR060_VPR_VSPol : 0)
+	    | (!pol->hsync_pol ? ZR060_VPR_HSPol : 0)
+	    | (pol->field_pol ? ZR060_VPR_FIPol : 0)
+	    | (pol->blank_pol ? ZR060_VPR_BLPol : 0)
+	    | (pol->subimg_pol ? ZR060_VPR_SImgPol : 0)
+	    | (pol->poe_pol ? ZR060_VPR_PoePol : 0)
+	    | (pol->pvalid_pol ? ZR060_VPR_PValPol : 0)
+	    | (pol->vclk_pol ? ZR060_VPR_VCLKPol : 0);
+	zr36060_write(ptr, ZR060_VPR, reg);
+
+	reg = 0;
+	switch (cap->decimation & 0xff) {
+	default:
+	case 1:
+		break;
+
+	case 2:
+		reg |= ZR060_SR_HScale2;
+		break;
+
+	case 4:
+		reg |= ZR060_SR_HScale4;
+		break;
+	}
+
+	switch (cap->decimation >> 8) {
+	default:
+	case 1:
+		break;
+
+	case 2:
+		reg |= ZR060_SR_VScale;
+		break;
+	}
+	zr36060_write(ptr, ZR060_SR, reg);
+
+	zr36060_write(ptr, ZR060_BCR_Y, 0x00);
+	zr36060_write(ptr, ZR060_BCR_U, 0x80);
+	zr36060_write(ptr, ZR060_BCR_V, 0x80);
+
+	/* sync generator */
+
+	reg = norm->Ht - 1;	/* Vtotal */
+	zr36060_write(ptr, ZR060_SGR_VTOTAL_HI, (reg >> 8) & 0xff);
+	zr36060_write(ptr, ZR060_SGR_VTOTAL_LO, (reg >> 0) & 0xff);
+
+	reg = norm->Wt - 1;	/* Htotal */
+	zr36060_write(ptr, ZR060_SGR_HTOTAL_HI, (reg >> 8) & 0xff);
+	zr36060_write(ptr, ZR060_SGR_HTOTAL_LO, (reg >> 0) & 0xff);
+
+	reg = 6 - 1;		/* VsyncSize */
+	zr36060_write(ptr, ZR060_SGR_VSYNC, reg);
+
+	//reg   = 30 - 1;               /* HsyncSize */
+///*CP*/        reg = (zr->params.norm == 1 ? 57 : 68);
+	reg = 68;
+	zr36060_write(ptr, ZR060_SGR_HSYNC, reg);
+
+	reg = norm->VStart - 1;	/* BVstart */
+	zr36060_write(ptr, ZR060_SGR_BVSTART, reg);
+
+	reg += norm->Ha / 2;	/* BVend */
+	zr36060_write(ptr, ZR060_SGR_BVEND_HI, (reg >> 8) & 0xff);
+	zr36060_write(ptr, ZR060_SGR_BVEND_LO, (reg >> 0) & 0xff);
+
+	reg = norm->HStart - 1;	/* BHstart */
+	zr36060_write(ptr, ZR060_SGR_BHSTART, reg);
+
+	reg += norm->Wa;	/* BHend */
+	zr36060_write(ptr, ZR060_SGR_BHEND_HI, (reg >> 8) & 0xff);
+	zr36060_write(ptr, ZR060_SGR_BHEND_LO, (reg >> 0) & 0xff);
+
+	/* active area */
+	reg = cap->y + norm->VStart;	/* Vstart */
+	zr36060_write(ptr, ZR060_AAR_VSTART_HI, (reg >> 8) & 0xff);
+	zr36060_write(ptr, ZR060_AAR_VSTART_LO, (reg >> 0) & 0xff);
+
+	reg += cap->height;	/* Vend */
+	zr36060_write(ptr, ZR060_AAR_VEND_HI, (reg >> 8) & 0xff);
+	zr36060_write(ptr, ZR060_AAR_VEND_LO, (reg >> 0) & 0xff);
+
+	reg = cap->x + norm->HStart;	/* Hstart */
+	zr36060_write(ptr, ZR060_AAR_HSTART_HI, (reg >> 8) & 0xff);
+	zr36060_write(ptr, ZR060_AAR_HSTART_LO, (reg >> 0) & 0xff);
+
+	reg += cap->width;	/* Hend */
+	zr36060_write(ptr, ZR060_AAR_HEND_HI, (reg >> 8) & 0xff);
+	zr36060_write(ptr, ZR060_AAR_HEND_LO, (reg >> 0) & 0xff);
+
+	/* subimage area */
+	reg = norm->VStart - 4;	/* SVstart */
+	zr36060_write(ptr, ZR060_SWR_VSTART_HI, (reg >> 8) & 0xff);
+	zr36060_write(ptr, ZR060_SWR_VSTART_LO, (reg >> 0) & 0xff);
+
+	reg += norm->Ha / 2 + 8;	/* SVend */
+	zr36060_write(ptr, ZR060_SWR_VEND_HI, (reg >> 8) & 0xff);
+	zr36060_write(ptr, ZR060_SWR_VEND_LO, (reg >> 0) & 0xff);
+
+	reg = norm->HStart /*+ 64 */  - 4;	/* SHstart */
+	zr36060_write(ptr, ZR060_SWR_HSTART_HI, (reg >> 8) & 0xff);
+	zr36060_write(ptr, ZR060_SWR_HSTART_LO, (reg >> 0) & 0xff);
+
+	reg += norm->Wa + 8;	/* SHend */
+	zr36060_write(ptr, ZR060_SWR_HEND_HI, (reg >> 8) & 0xff);
+	zr36060_write(ptr, ZR060_SWR_HEND_LO, (reg >> 0) & 0xff);
+
+	size = ptr->width * ptr->height;
+	/* Target compressed field size in bits: */
+	size = size * 16;	/* uncompressed size in bits */
+	/* (Ronald) by default, quality = 100 is a compression
+	 * ratio 1:2. Setting low_bitrate (insmod option) sets
+	 * it to 1:4 (instead of 1:2, zr36060 max) as limit because the
+	 * buz can't handle more at decimation=1... Use low_bitrate if
+	 * you have a Buz, unless you know what you're doing */
+	size = size * cap->quality / (low_bitrate ? 400 : 200);
+	/* Lower limit (arbitrary, 1 KB) */
+	if (size < 8192)
+		size = 8192;
+	/* Upper limit: 7/8 of the code buffers */
+	if (size > ptr->total_code_vol * 7)
+		size = ptr->total_code_vol * 7;
+
+	ptr->real_code_vol = size >> 3;	/* in bytes */
+
+	/* the MBCVR is the *maximum* block volume, according to the
+	 * JPEG ISO specs, this shouldn't be used, since that allows
+	 * for the best encoding quality. So set it to it's max value */
+	reg = ptr->max_block_vol;
+	zr36060_write(ptr, ZR060_MBCVR, reg);
+
+	return 0;
+}
+
+/* additional control functions */
+static int
+zr36060_control (struct videocodec *codec,
+		 int                type,
+		 int                size,
+		 void              *data)
+{
+	struct zr36060 *ptr = (struct zr36060 *) codec->data;
+	int *ival = (int *) data;
+
+	dprintk(2, "%s: control %d call with %d byte\n", ptr->name, type,
+		size);
+
+	switch (type) {
+	case CODEC_G_STATUS:	/* get last status */
+		if (size != sizeof(int))
+			return -EFAULT;
+		zr36060_read_status(ptr);
+		*ival = ptr->status;
+		break;
+
+	case CODEC_G_CODEC_MODE:
+		if (size != sizeof(int))
+			return -EFAULT;
+		*ival = CODEC_MODE_BJPG;
+		break;
+
+	case CODEC_S_CODEC_MODE:
+		if (size != sizeof(int))
+			return -EFAULT;
+		if (*ival != CODEC_MODE_BJPG)
+			return -EINVAL;
+		/* not needed, do nothing */
+		return 0;
+
+	case CODEC_G_VFE:
+	case CODEC_S_VFE:
+		/* not needed, do nothing */
+		return 0;
+
+	case CODEC_S_MMAP:
+		/* not available, give an error */
+		return -ENXIO;
+
+	case CODEC_G_JPEG_TDS_BYTE:	/* get target volume in byte */
+		if (size != sizeof(int))
+			return -EFAULT;
+		*ival = ptr->total_code_vol;
+		break;
+
+	case CODEC_S_JPEG_TDS_BYTE:	/* get target volume in byte */
+		if (size != sizeof(int))
+			return -EFAULT;
+		ptr->total_code_vol = *ival;
+		ptr->real_code_vol = (ptr->total_code_vol * 6) >> 3;
+		break;
+
+	case CODEC_G_JPEG_SCALE:	/* get scaling factor */
+		if (size != sizeof(int))
+			return -EFAULT;
+		*ival = zr36060_read_scalefactor(ptr);
+		break;
+
+	case CODEC_S_JPEG_SCALE:	/* set scaling factor */
+		if (size != sizeof(int))
+			return -EFAULT;
+		ptr->scalefact = *ival;
+		break;
+
+	case CODEC_G_JPEG_APP_DATA: {	/* get appn marker data */
+		struct jpeg_app_marker *app = data;
+
+		if (size != sizeof(struct jpeg_app_marker))
+			return -EFAULT;
+
+		*app = ptr->app;
+		break;
+	}
+
+	case CODEC_S_JPEG_APP_DATA: {	/* set appn marker data */
+		struct jpeg_app_marker *app = data;
+
+		if (size != sizeof(struct jpeg_app_marker))
+			return -EFAULT;
+
+		ptr->app = *app;
+		break;
+	}
+
+	case CODEC_G_JPEG_COM_DATA: {	/* get comment marker data */
+		struct jpeg_com_marker *com = data;
+
+		if (size != sizeof(struct jpeg_com_marker))
+			return -EFAULT;
+
+		*com = ptr->com;
+		break;
+	}
+
+	case CODEC_S_JPEG_COM_DATA: {	/* set comment marker data */
+		struct jpeg_com_marker *com = data;
+
+		if (size != sizeof(struct jpeg_com_marker))
+			return -EFAULT;
+
+		ptr->com = *com;
+		break;
+	}
+
+	default:
+		return -EINVAL;
+	}
+
+	return size;
+}
+
+/* =========================================================================
+   Exit and unregister function:
+
+   Deinitializes Zoran's JPEG processor
+   ========================================================================= */
+
+static int
+zr36060_unset (struct videocodec *codec)
+{
+	struct zr36060 *ptr = codec->data;
+
+	if (ptr) {
+		/* do wee need some codec deinit here, too ???? */
+
+		dprintk(1, "%s: finished codec #%d\n", ptr->name,
+			ptr->num);
+		kfree(ptr);
+		codec->data = NULL;
+
+		zr36060_codecs--;
+		return 0;
+	}
+
+	return -EFAULT;
+}
+
+/* =========================================================================
+   Setup and registry function:
+
+   Initializes Zoran's JPEG processor
+
+   Also sets pixel size, average code size, mode (compr./decompr.)
+   (the given size is determined by the processor with the video interface)
+   ========================================================================= */
+
+static int
+zr36060_setup (struct videocodec *codec)
+{
+	struct zr36060 *ptr;
+	int res;
+
+	dprintk(2, "zr36060: initializing MJPEG subsystem #%d.\n",
+		zr36060_codecs);
+
+	if (zr36060_codecs == MAX_CODECS) {
+		dprintk(1,
+			KERN_ERR "zr36060: Can't attach more codecs!\n");
+		return -ENOSPC;
+	}
+	//mem structure init
+	codec->data = ptr = kmalloc(sizeof(struct zr36060), GFP_KERNEL);
+	if (NULL == ptr) {
+		dprintk(1, KERN_ERR "zr36060: Can't get enough memory!\n");
+		return -ENOMEM;
+	}
+	memset(ptr, 0, sizeof(struct zr36060));
+
+	snprintf(ptr->name, sizeof(ptr->name), "zr36060[%d]",
+		 zr36060_codecs);
+	ptr->num = zr36060_codecs++;
+	ptr->codec = codec;
+
+	//testing
+	res = zr36060_basic_test(ptr);
+	if (res < 0) {
+		zr36060_unset(codec);
+		return res;
+	}
+	//final setup
+	memcpy(ptr->h_samp_ratio, zr36060_decimation_h, 8);
+	memcpy(ptr->v_samp_ratio, zr36060_decimation_v, 8);
+
+	ptr->bitrate_ctrl = 0;	/* 0 or 1 - fixed file size flag
+				 * (what is the difference?) */
+	ptr->mode = CODEC_DO_COMPRESSION;
+	ptr->width = 384;
+	ptr->height = 288;
+	ptr->total_code_vol = 16000;	/* CHECKME */
+	ptr->real_code_vol = (ptr->total_code_vol * 6) >> 3;
+	ptr->max_block_vol = 240;	/* CHECKME, was 120 is 240 */
+	ptr->scalefact = 0x100;
+	ptr->dri = 1;		/* CHECKME, was 8 is 1 */
+
+	/* by default, no COM or APP markers - app should set those */
+	ptr->com.len = 0;
+	ptr->app.appn = 0;
+	ptr->app.len = 0;
+
+	zr36060_init(ptr);
+
+	dprintk(1, KERN_INFO "%s: codec attached and running\n",
+		ptr->name);
+
+	return 0;
+}
+
+static const struct videocodec zr36060_codec = {
+	.owner = THIS_MODULE,
+	.name = "zr36060",
+	.magic = 0L,		// magic not used
+	.flags =
+	    CODEC_FLAG_JPEG | CODEC_FLAG_HARDWARE | CODEC_FLAG_ENCODER |
+	    CODEC_FLAG_DECODER | CODEC_FLAG_VFE,
+	.type = CODEC_TYPE_ZR36060,
+	.setup = zr36060_setup,	// functionality
+	.unset = zr36060_unset,
+	.set_mode = zr36060_set_mode,
+	.set_video = zr36060_set_video,
+	.control = zr36060_control,
+	// others are not used
+};
+
+/* =========================================================================
+   HOOK IN DRIVER AS KERNEL MODULE
+   ========================================================================= */
+
+static int __init
+zr36060_init_module (void)
+{
+	//dprintk(1, "zr36060 driver %s\n",ZR060_VERSION);
+	zr36060_codecs = 0;
+	return videocodec_register(&zr36060_codec);
+}
+
+static void __exit
+zr36060_cleanup_module (void)
+{
+	if (zr36060_codecs) {
+		dprintk(1,
+			"zr36060: something's wrong - %d codecs left somehow.\n",
+			zr36060_codecs);
+	} 
+
+	/* however, we can't just stay alive */
+	videocodec_unregister(&zr36060_codec);
+}
+
+module_init(zr36060_init_module);
+module_exit(zr36060_cleanup_module);
+
+MODULE_AUTHOR("Laurent Pinchart <laurent.pinchart@skynet.be>");
+MODULE_DESCRIPTION("Driver module for ZR36060 jpeg processors "
+		   ZR060_VERSION);
+MODULE_LICENSE("GPL");