Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/drivers/net/3c509.c b/drivers/net/3c509.c
new file mode 100644
index 0000000..e843109
--- /dev/null
+++ b/drivers/net/3c509.c
@@ -0,0 +1,1622 @@
+/* 3c509.c: A 3c509 EtherLink3 ethernet driver for linux. */
+/*
+ Written 1993-2000 by Donald Becker.
+
+ Copyright 1994-2000 by Donald Becker.
+ Copyright 1993 United States Government as represented by the
+ Director, National Security Agency. This software may be used and
+ distributed according to the terms of the GNU General Public License,
+ incorporated herein by reference.
+
+ This driver is for the 3Com EtherLinkIII series.
+
+ The author may be reached as becker@scyld.com, or C/O
+ Scyld Computing Corporation
+ 410 Severn Ave., Suite 210
+ Annapolis MD 21403
+
+ Known limitations:
+ Because of the way 3c509 ISA detection works it's difficult to predict
+ a priori which of several ISA-mode cards will be detected first.
+
+ This driver does not use predictive interrupt mode, resulting in higher
+ packet latency but lower overhead. If interrupts are disabled for an
+ unusually long time it could also result in missed packets, but in
+ practice this rarely happens.
+
+
+ FIXES:
+ Alan Cox: Removed the 'Unexpected interrupt' bug.
+ Michael Meskes: Upgraded to Donald Becker's version 1.07.
+ Alan Cox: Increased the eeprom delay. Regardless of
+ what the docs say some people definitely
+ get problems with lower (but in card spec)
+ delays
+ v1.10 4/21/97 Fixed module code so that multiple cards may be detected,
+ other cleanups. -djb
+ Andrea Arcangeli: Upgraded to Donald Becker's version 1.12.
+ Rick Payne: Fixed SMP race condition
+ v1.13 9/8/97 Made 'max_interrupt_work' an insmod-settable variable -djb
+ v1.14 10/15/97 Avoided waiting..discard message for fast machines -djb
+ v1.15 1/31/98 Faster recovery for Tx errors. -djb
+ v1.16 2/3/98 Different ID port handling to avoid sound cards. -djb
+ v1.18 12Mar2001 Andrew Morton <andrewm@uow.edu.au>
+ - Avoid bogus detect of 3c590's (Andrzej Krzysztofowicz)
+ - Reviewed against 1.18 from scyld.com
+ v1.18a 17Nov2001 Jeff Garzik <jgarzik@pobox.com>
+ - ethtool support
+ v1.18b 1Mar2002 Zwane Mwaikambo <zwane@commfireservices.com>
+ - Power Management support
+ v1.18c 1Mar2002 David Ruggiero <jdr@farfalle.com>
+ - Full duplex support
+ v1.19 16Oct2002 Zwane Mwaikambo <zwane@linuxpower.ca>
+ - Additional ethtool features
+ v1.19a 28Oct2002 Davud Ruggiero <jdr@farfalle.com>
+ - Increase *read_eeprom udelay to workaround oops with 2 cards.
+ v1.19b 08Nov2002 Marc Zyngier <maz@wild-wind.fr.eu.org>
+ - Introduce driver model for EISA cards.
+*/
+
+#define DRV_NAME "3c509"
+#define DRV_VERSION "1.19b"
+#define DRV_RELDATE "08Nov2002"
+
+/* A few values that may be tweaked. */
+
+/* Time in jiffies before concluding the transmitter is hung. */
+#define TX_TIMEOUT (400*HZ/1000)
+/* Maximum events (Rx packets, etc.) to handle at each interrupt. */
+static int max_interrupt_work = 10;
+
+#include <linux/config.h>
+#include <linux/module.h>
+#ifdef CONFIG_MCA
+#include <linux/mca.h>
+#endif
+#include <linux/isapnp.h>
+#include <linux/string.h>
+#include <linux/interrupt.h>
+#include <linux/errno.h>
+#include <linux/in.h>
+#include <linux/slab.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/pm.h>
+#include <linux/skbuff.h>
+#include <linux/delay.h> /* for udelay() */
+#include <linux/spinlock.h>
+#include <linux/ethtool.h>
+#include <linux/device.h>
+#include <linux/eisa.h>
+#include <linux/bitops.h>
+
+#include <asm/uaccess.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+
+static char versionA[] __initdata = DRV_NAME ".c:" DRV_VERSION " " DRV_RELDATE " becker@scyld.com\n";
+static char versionB[] __initdata = "http://www.scyld.com/network/3c509.html\n";
+
+#ifdef EL3_DEBUG
+static int el3_debug = EL3_DEBUG;
+#else
+static int el3_debug = 2;
+#endif
+
+/* Used to do a global count of all the cards in the system. Must be
+ * a global variable so that the mca/eisa probe routines can increment
+ * it */
+static int el3_cards = 0;
+
+/* To minimize the size of the driver source I only define operating
+ constants if they are used several times. You'll need the manual
+ anyway if you want to understand driver details. */
+/* Offsets from base I/O address. */
+#define EL3_DATA 0x00
+#define EL3_CMD 0x0e
+#define EL3_STATUS 0x0e
+#define EEPROM_READ 0x80
+
+#define EL3_IO_EXTENT 16
+
+#define EL3WINDOW(win_num) outw(SelectWindow + (win_num), ioaddr + EL3_CMD)
+
+
+/* The top five bits written to EL3_CMD are a command, the lower
+ 11 bits are the parameter, if applicable. */
+enum c509cmd {
+ TotalReset = 0<<11, SelectWindow = 1<<11, StartCoax = 2<<11,
+ RxDisable = 3<<11, RxEnable = 4<<11, RxReset = 5<<11, RxDiscard = 8<<11,
+ TxEnable = 9<<11, TxDisable = 10<<11, TxReset = 11<<11,
+ FakeIntr = 12<<11, AckIntr = 13<<11, SetIntrEnb = 14<<11,
+ SetStatusEnb = 15<<11, SetRxFilter = 16<<11, SetRxThreshold = 17<<11,
+ SetTxThreshold = 18<<11, SetTxStart = 19<<11, StatsEnable = 21<<11,
+ StatsDisable = 22<<11, StopCoax = 23<<11, PowerUp = 27<<11,
+ PowerDown = 28<<11, PowerAuto = 29<<11};
+
+enum c509status {
+ IntLatch = 0x0001, AdapterFailure = 0x0002, TxComplete = 0x0004,
+ TxAvailable = 0x0008, RxComplete = 0x0010, RxEarly = 0x0020,
+ IntReq = 0x0040, StatsFull = 0x0080, CmdBusy = 0x1000, };
+
+/* The SetRxFilter command accepts the following classes: */
+enum RxFilter {
+ RxStation = 1, RxMulticast = 2, RxBroadcast = 4, RxProm = 8 };
+
+/* Register window 1 offsets, the window used in normal operation. */
+#define TX_FIFO 0x00
+#define RX_FIFO 0x00
+#define RX_STATUS 0x08
+#define TX_STATUS 0x0B
+#define TX_FREE 0x0C /* Remaining free bytes in Tx buffer. */
+
+#define WN0_CONF_CTRL 0x04 /* Window 0: Configuration control register */
+#define WN0_ADDR_CONF 0x06 /* Window 0: Address configuration register */
+#define WN0_IRQ 0x08 /* Window 0: Set IRQ line in bits 12-15. */
+#define WN4_MEDIA 0x0A /* Window 4: Various transcvr/media bits. */
+#define MEDIA_TP 0x00C0 /* Enable link beat and jabber for 10baseT. */
+#define WN4_NETDIAG 0x06 /* Window 4: Net diagnostic */
+#define FD_ENABLE 0x8000 /* Enable full-duplex ("external loopback") */
+
+/*
+ * Must be a power of two (we use a binary and in the
+ * circular queue)
+ */
+#define SKB_QUEUE_SIZE 64
+
+struct el3_private {
+ struct net_device_stats stats;
+ struct net_device *next_dev;
+ spinlock_t lock;
+ /* skb send-queue */
+ int head, size;
+ struct sk_buff *queue[SKB_QUEUE_SIZE];
+#ifdef CONFIG_PM
+ struct pm_dev *pmdev;
+#endif
+ enum {
+ EL3_MCA,
+ EL3_PNP,
+ EL3_EISA,
+ } type; /* type of device */
+ struct device *dev;
+};
+static int id_port __initdata = 0x110; /* Start with 0x110 to avoid new sound cards.*/
+static struct net_device *el3_root_dev;
+
+static ushort id_read_eeprom(int index);
+static ushort read_eeprom(int ioaddr, int index);
+static int el3_open(struct net_device *dev);
+static int el3_start_xmit(struct sk_buff *skb, struct net_device *dev);
+static irqreturn_t el3_interrupt(int irq, void *dev_id, struct pt_regs *regs);
+static void update_stats(struct net_device *dev);
+static struct net_device_stats *el3_get_stats(struct net_device *dev);
+static int el3_rx(struct net_device *dev);
+static int el3_close(struct net_device *dev);
+static void set_multicast_list(struct net_device *dev);
+static void el3_tx_timeout (struct net_device *dev);
+static void el3_down(struct net_device *dev);
+static void el3_up(struct net_device *dev);
+static struct ethtool_ops ethtool_ops;
+#ifdef CONFIG_PM
+static int el3_suspend(struct pm_dev *pdev);
+static int el3_resume(struct pm_dev *pdev);
+static int el3_pm_callback(struct pm_dev *pdev, pm_request_t rqst, void *data);
+#endif
+/* generic device remove for all device types */
+#if defined(CONFIG_EISA) || defined(CONFIG_MCA)
+static int el3_device_remove (struct device *device);
+#endif
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void el3_poll_controller(struct net_device *dev);
+#endif
+
+#ifdef CONFIG_EISA
+static struct eisa_device_id el3_eisa_ids[] = {
+ { "TCM5092" },
+ { "TCM5093" },
+ { "" }
+};
+
+static int el3_eisa_probe (struct device *device);
+
+static struct eisa_driver el3_eisa_driver = {
+ .id_table = el3_eisa_ids,
+ .driver = {
+ .name = "3c509",
+ .probe = el3_eisa_probe,
+ .remove = __devexit_p (el3_device_remove)
+ }
+};
+#endif
+
+#ifdef CONFIG_MCA
+static int el3_mca_probe(struct device *dev);
+
+static short el3_mca_adapter_ids[] __initdata = {
+ 0x627c,
+ 0x627d,
+ 0x62db,
+ 0x62f6,
+ 0x62f7,
+ 0x0000
+};
+
+static char *el3_mca_adapter_names[] __initdata = {
+ "3Com 3c529 EtherLink III (10base2)",
+ "3Com 3c529 EtherLink III (10baseT)",
+ "3Com 3c529 EtherLink III (test mode)",
+ "3Com 3c529 EtherLink III (TP or coax)",
+ "3Com 3c529 EtherLink III (TP)",
+ NULL
+};
+
+static struct mca_driver el3_mca_driver = {
+ .id_table = el3_mca_adapter_ids,
+ .driver = {
+ .name = "3c529",
+ .bus = &mca_bus_type,
+ .probe = el3_mca_probe,
+ .remove = __devexit_p(el3_device_remove),
+ },
+};
+#endif /* CONFIG_MCA */
+
+#if defined(__ISAPNP__)
+static struct isapnp_device_id el3_isapnp_adapters[] __initdata = {
+ { ISAPNP_ANY_ID, ISAPNP_ANY_ID,
+ ISAPNP_VENDOR('T', 'C', 'M'), ISAPNP_FUNCTION(0x5090),
+ (long) "3Com Etherlink III (TP)" },
+ { ISAPNP_ANY_ID, ISAPNP_ANY_ID,
+ ISAPNP_VENDOR('T', 'C', 'M'), ISAPNP_FUNCTION(0x5091),
+ (long) "3Com Etherlink III" },
+ { ISAPNP_ANY_ID, ISAPNP_ANY_ID,
+ ISAPNP_VENDOR('T', 'C', 'M'), ISAPNP_FUNCTION(0x5094),
+ (long) "3Com Etherlink III (combo)" },
+ { ISAPNP_ANY_ID, ISAPNP_ANY_ID,
+ ISAPNP_VENDOR('T', 'C', 'M'), ISAPNP_FUNCTION(0x5095),
+ (long) "3Com Etherlink III (TPO)" },
+ { ISAPNP_ANY_ID, ISAPNP_ANY_ID,
+ ISAPNP_VENDOR('T', 'C', 'M'), ISAPNP_FUNCTION(0x5098),
+ (long) "3Com Etherlink III (TPC)" },
+ { ISAPNP_ANY_ID, ISAPNP_ANY_ID,
+ ISAPNP_VENDOR('P', 'N', 'P'), ISAPNP_FUNCTION(0x80f7),
+ (long) "3Com Etherlink III compatible" },
+ { ISAPNP_ANY_ID, ISAPNP_ANY_ID,
+ ISAPNP_VENDOR('P', 'N', 'P'), ISAPNP_FUNCTION(0x80f8),
+ (long) "3Com Etherlink III compatible" },
+ { } /* terminate list */
+};
+
+static u16 el3_isapnp_phys_addr[8][3];
+static int nopnp;
+#endif /* __ISAPNP__ */
+
+/* With the driver model introduction for EISA devices, both init
+ * and cleanup have been split :
+ * - EISA devices probe/remove starts in el3_eisa_probe/el3_device_remove
+ * - MCA/ISA still use el3_probe
+ *
+ * Both call el3_common_init/el3_common_remove. */
+
+static int __init el3_common_init(struct net_device *dev)
+{
+ struct el3_private *lp = netdev_priv(dev);
+ short i;
+ int err;
+
+ spin_lock_init(&lp->lock);
+
+ if (dev->mem_start & 0x05) { /* xcvr codes 1/3/4/12 */
+ dev->if_port = (dev->mem_start & 0x0f);
+ } else { /* xcvr codes 0/8 */
+ /* use eeprom value, but save user's full-duplex selection */
+ dev->if_port |= (dev->mem_start & 0x08);
+ }
+
+ /* The EL3-specific entries in the device structure. */
+ dev->open = &el3_open;
+ dev->hard_start_xmit = &el3_start_xmit;
+ dev->stop = &el3_close;
+ dev->get_stats = &el3_get_stats;
+ dev->set_multicast_list = &set_multicast_list;
+ dev->tx_timeout = el3_tx_timeout;
+ dev->watchdog_timeo = TX_TIMEOUT;
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ dev->poll_controller = el3_poll_controller;
+#endif
+ SET_ETHTOOL_OPS(dev, ðtool_ops);
+
+ err = register_netdev(dev);
+ if (err) {
+ printk(KERN_ERR "Failed to register 3c5x9 at %#3.3lx, IRQ %d.\n",
+ dev->base_addr, dev->irq);
+ release_region(dev->base_addr, EL3_IO_EXTENT);
+ return err;
+ }
+
+ {
+ const char *if_names[] = {"10baseT", "AUI", "undefined", "BNC"};
+ printk("%s: 3c5x9 found at %#3.3lx, %s port, address ",
+ dev->name, dev->base_addr,
+ if_names[(dev->if_port & 0x03)]);
+ }
+
+ /* Read in the station address. */
+ for (i = 0; i < 6; i++)
+ printk(" %2.2x", dev->dev_addr[i]);
+ printk(", IRQ %d.\n", dev->irq);
+
+ if (el3_debug > 0)
+ printk(KERN_INFO "%s" KERN_INFO "%s", versionA, versionB);
+ return 0;
+
+}
+
+static void el3_common_remove (struct net_device *dev)
+{
+ struct el3_private *lp = netdev_priv(dev);
+
+ (void) lp; /* Keep gcc quiet... */
+#ifdef CONFIG_PM
+ if (lp->pmdev)
+ pm_unregister(lp->pmdev);
+#endif
+#if defined(__ISAPNP__)
+ if (lp->type == EL3_PNP)
+ pnp_device_detach(to_pnp_dev(lp->dev));
+#endif
+
+ unregister_netdev (dev);
+ release_region(dev->base_addr, EL3_IO_EXTENT);
+ free_netdev (dev);
+}
+
+static int __init el3_probe(int card_idx)
+{
+ struct net_device *dev;
+ struct el3_private *lp;
+ short lrs_state = 0xff, i;
+ int ioaddr, irq, if_port;
+ u16 phys_addr[3];
+ static int current_tag;
+ int err = -ENODEV;
+#if defined(__ISAPNP__)
+ static int pnp_cards;
+ struct pnp_dev *idev = NULL;
+
+ if (nopnp == 1)
+ goto no_pnp;
+
+ for (i=0; el3_isapnp_adapters[i].vendor != 0; i++) {
+ int j;
+ while ((idev = pnp_find_dev(NULL,
+ el3_isapnp_adapters[i].vendor,
+ el3_isapnp_adapters[i].function,
+ idev))) {
+ if (pnp_device_attach(idev) < 0)
+ continue;
+ if (pnp_activate_dev(idev) < 0) {
+__again:
+ pnp_device_detach(idev);
+ continue;
+ }
+ if (!pnp_port_valid(idev, 0) || !pnp_irq_valid(idev, 0))
+ goto __again;
+ ioaddr = pnp_port_start(idev, 0);
+ if (!request_region(ioaddr, EL3_IO_EXTENT, "3c509 PnP")) {
+ pnp_device_detach(idev);
+ return -EBUSY;
+ }
+ irq = pnp_irq(idev, 0);
+ if (el3_debug > 3)
+ printk ("ISAPnP reports %s at i/o 0x%x, irq %d\n",
+ (char*) el3_isapnp_adapters[i].driver_data, ioaddr, irq);
+ EL3WINDOW(0);
+ for (j = 0; j < 3; j++)
+ el3_isapnp_phys_addr[pnp_cards][j] =
+ phys_addr[j] =
+ htons(read_eeprom(ioaddr, j));
+ if_port = read_eeprom(ioaddr, 8) >> 14;
+ dev = alloc_etherdev(sizeof (struct el3_private));
+ if (!dev) {
+ release_region(ioaddr, EL3_IO_EXTENT);
+ pnp_device_detach(idev);
+ return -ENOMEM;
+ }
+
+ SET_MODULE_OWNER(dev);
+ SET_NETDEV_DEV(dev, &idev->dev);
+ pnp_cards++;
+
+ netdev_boot_setup_check(dev);
+ goto found;
+ }
+ }
+no_pnp:
+#endif /* __ISAPNP__ */
+
+ /* Select an open I/O location at 0x1*0 to do contention select. */
+ for ( ; id_port < 0x200; id_port += 0x10) {
+ if (!request_region(id_port, 1, "3c509"))
+ continue;
+ outb(0x00, id_port);
+ outb(0xff, id_port);
+ if (inb(id_port) & 0x01){
+ release_region(id_port, 1);
+ break;
+ } else
+ release_region(id_port, 1);
+ }
+ if (id_port >= 0x200) {
+ /* Rare -- do we really need a warning? */
+ printk(" WARNING: No I/O port available for 3c509 activation.\n");
+ return -ENODEV;
+ }
+
+ /* Next check for all ISA bus boards by sending the ID sequence to the
+ ID_PORT. We find cards past the first by setting the 'current_tag'
+ on cards as they are found. Cards with their tag set will not
+ respond to subsequent ID sequences. */
+
+ outb(0x00, id_port);
+ outb(0x00, id_port);
+ for(i = 0; i < 255; i++) {
+ outb(lrs_state, id_port);
+ lrs_state <<= 1;
+ lrs_state = lrs_state & 0x100 ? lrs_state ^ 0xcf : lrs_state;
+ }
+
+ /* For the first probe, clear all board's tag registers. */
+ if (current_tag == 0)
+ outb(0xd0, id_port);
+ else /* Otherwise kill off already-found boards. */
+ outb(0xd8, id_port);
+
+ if (id_read_eeprom(7) != 0x6d50) {
+ return -ENODEV;
+ }
+
+ /* Read in EEPROM data, which does contention-select.
+ Only the lowest address board will stay "on-line".
+ 3Com got the byte order backwards. */
+ for (i = 0; i < 3; i++) {
+ phys_addr[i] = htons(id_read_eeprom(i));
+ }
+
+#if defined(__ISAPNP__)
+ if (nopnp == 0) {
+ /* The ISA PnP 3c509 cards respond to the ID sequence.
+ This check is needed in order not to register them twice. */
+ for (i = 0; i < pnp_cards; i++) {
+ if (phys_addr[0] == el3_isapnp_phys_addr[i][0] &&
+ phys_addr[1] == el3_isapnp_phys_addr[i][1] &&
+ phys_addr[2] == el3_isapnp_phys_addr[i][2])
+ {
+ if (el3_debug > 3)
+ printk("3c509 with address %02x %02x %02x %02x %02x %02x was found by ISAPnP\n",
+ phys_addr[0] & 0xff, phys_addr[0] >> 8,
+ phys_addr[1] & 0xff, phys_addr[1] >> 8,
+ phys_addr[2] & 0xff, phys_addr[2] >> 8);
+ /* Set the adaptor tag so that the next card can be found. */
+ outb(0xd0 + ++current_tag, id_port);
+ goto no_pnp;
+ }
+ }
+ }
+#endif /* __ISAPNP__ */
+
+ {
+ unsigned int iobase = id_read_eeprom(8);
+ if_port = iobase >> 14;
+ ioaddr = 0x200 + ((iobase & 0x1f) << 4);
+ }
+ irq = id_read_eeprom(9) >> 12;
+
+ dev = alloc_etherdev(sizeof (struct el3_private));
+ if (!dev)
+ return -ENOMEM;
+
+ SET_MODULE_OWNER(dev);
+
+ netdev_boot_setup_check(dev);
+
+ /* Set passed-in IRQ or I/O Addr. */
+ if (dev->irq > 1 && dev->irq < 16)
+ irq = dev->irq;
+
+ if (dev->base_addr) {
+ if (dev->mem_end == 0x3c509 /* Magic key */
+ && dev->base_addr >= 0x200 && dev->base_addr <= 0x3e0)
+ ioaddr = dev->base_addr & 0x3f0;
+ else if (dev->base_addr != ioaddr)
+ goto out;
+ }
+
+ if (!request_region(ioaddr, EL3_IO_EXTENT, "3c509")) {
+ err = -EBUSY;
+ goto out;
+ }
+
+ /* Set the adaptor tag so that the next card can be found. */
+ outb(0xd0 + ++current_tag, id_port);
+
+ /* Activate the adaptor at the EEPROM location. */
+ outb((ioaddr >> 4) | 0xe0, id_port);
+
+ EL3WINDOW(0);
+ if (inw(ioaddr) != 0x6d50)
+ goto out1;
+
+ /* Free the interrupt so that some other card can use it. */
+ outw(0x0f00, ioaddr + WN0_IRQ);
+
+#if defined(__ISAPNP__)
+ found: /* PNP jumps here... */
+#endif /* __ISAPNP__ */
+
+ memcpy(dev->dev_addr, phys_addr, sizeof(phys_addr));
+ dev->base_addr = ioaddr;
+ dev->irq = irq;
+ dev->if_port = if_port;
+ lp = netdev_priv(dev);
+#if defined(__ISAPNP__)
+ lp->dev = &idev->dev;
+#endif
+ err = el3_common_init(dev);
+
+ if (err)
+ goto out1;
+
+#ifdef CONFIG_PM
+ /* register power management */
+ lp->pmdev = pm_register(PM_ISA_DEV, card_idx, el3_pm_callback);
+ if (lp->pmdev) {
+ struct pm_dev *p;
+ p = lp->pmdev;
+ p->data = (struct net_device *)dev;
+ }
+#endif
+
+ el3_cards++;
+ lp->next_dev = el3_root_dev;
+ el3_root_dev = dev;
+ return 0;
+
+out1:
+#if defined(__ISAPNP__)
+ if (idev)
+ pnp_device_detach(idev);
+#endif
+out:
+ free_netdev(dev);
+ return err;
+}
+
+#ifdef CONFIG_MCA
+static int __init el3_mca_probe(struct device *device)
+{
+ /* Based on Erik Nygren's (nygren@mit.edu) 3c529 patch,
+ * heavily modified by Chris Beauregard
+ * (cpbeaure@csclub.uwaterloo.ca) to support standard MCA
+ * probing.
+ *
+ * redone for multi-card detection by ZP Gu (zpg@castle.net)
+ * now works as a module */
+
+ struct el3_private *lp;
+ short i;
+ int ioaddr, irq, if_port;
+ u16 phys_addr[3];
+ struct net_device *dev = NULL;
+ u_char pos4, pos5;
+ struct mca_device *mdev = to_mca_device(device);
+ int slot = mdev->slot;
+ int err;
+
+ pos4 = mca_device_read_stored_pos(mdev, 4);
+ pos5 = mca_device_read_stored_pos(mdev, 5);
+
+ ioaddr = ((short)((pos4&0xfc)|0x02)) << 8;
+ irq = pos5 & 0x0f;
+
+
+ printk("3c529: found %s at slot %d\n",
+ el3_mca_adapter_names[mdev->index], slot + 1);
+
+ /* claim the slot */
+ strncpy(mdev->name, el3_mca_adapter_names[mdev->index],
+ sizeof(mdev->name));
+ mca_device_set_claim(mdev, 1);
+
+ if_port = pos4 & 0x03;
+
+ irq = mca_device_transform_irq(mdev, irq);
+ ioaddr = mca_device_transform_ioport(mdev, ioaddr);
+ if (el3_debug > 2) {
+ printk("3c529: irq %d ioaddr 0x%x ifport %d\n", irq, ioaddr, if_port);
+ }
+ EL3WINDOW(0);
+ for (i = 0; i < 3; i++) {
+ phys_addr[i] = htons(read_eeprom(ioaddr, i));
+ }
+
+ dev = alloc_etherdev(sizeof (struct el3_private));
+ if (dev == NULL) {
+ release_region(ioaddr, EL3_IO_EXTENT);
+ return -ENOMEM;
+ }
+
+ SET_MODULE_OWNER(dev);
+ netdev_boot_setup_check(dev);
+
+ memcpy(dev->dev_addr, phys_addr, sizeof(phys_addr));
+ dev->base_addr = ioaddr;
+ dev->irq = irq;
+ dev->if_port = if_port;
+ lp = netdev_priv(dev);
+ lp->dev = device;
+ lp->type = EL3_MCA;
+ device->driver_data = dev;
+ err = el3_common_init(dev);
+
+ if (err) {
+ device->driver_data = NULL;
+ free_netdev(dev);
+ return -ENOMEM;
+ }
+
+ el3_cards++;
+ return 0;
+}
+
+#endif /* CONFIG_MCA */
+
+#ifdef CONFIG_EISA
+static int __init el3_eisa_probe (struct device *device)
+{
+ struct el3_private *lp;
+ short i;
+ int ioaddr, irq, if_port;
+ u16 phys_addr[3];
+ struct net_device *dev = NULL;
+ struct eisa_device *edev;
+ int err;
+
+ /* Yeepee, The driver framework is calling us ! */
+ edev = to_eisa_device (device);
+ ioaddr = edev->base_addr;
+
+ if (!request_region(ioaddr, EL3_IO_EXTENT, "3c509"))
+ return -EBUSY;
+
+ /* Change the register set to the configuration window 0. */
+ outw(SelectWindow | 0, ioaddr + 0xC80 + EL3_CMD);
+
+ irq = inw(ioaddr + WN0_IRQ) >> 12;
+ if_port = inw(ioaddr + 6)>>14;
+ for (i = 0; i < 3; i++)
+ phys_addr[i] = htons(read_eeprom(ioaddr, i));
+
+ /* Restore the "Product ID" to the EEPROM read register. */
+ read_eeprom(ioaddr, 3);
+
+ dev = alloc_etherdev(sizeof (struct el3_private));
+ if (dev == NULL) {
+ release_region(ioaddr, EL3_IO_EXTENT);
+ return -ENOMEM;
+ }
+
+ SET_MODULE_OWNER(dev);
+
+ netdev_boot_setup_check(dev);
+
+ memcpy(dev->dev_addr, phys_addr, sizeof(phys_addr));
+ dev->base_addr = ioaddr;
+ dev->irq = irq;
+ dev->if_port = if_port;
+ lp = netdev_priv(dev);
+ lp->dev = device;
+ lp->type = EL3_EISA;
+ eisa_set_drvdata (edev, dev);
+ err = el3_common_init(dev);
+
+ if (err) {
+ eisa_set_drvdata (edev, NULL);
+ free_netdev(dev);
+ return err;
+ }
+
+ el3_cards++;
+ return 0;
+}
+#endif
+
+#if defined(CONFIG_EISA) || defined(CONFIG_MCA)
+/* This remove works for all device types.
+ *
+ * The net dev must be stored in the driver_data field */
+static int __devexit el3_device_remove (struct device *device)
+{
+ struct net_device *dev;
+
+ dev = device->driver_data;
+
+ el3_common_remove (dev);
+ return 0;
+}
+#endif
+
+/* Read a word from the EEPROM using the regular EEPROM access register.
+ Assume that we are in register window zero.
+ */
+static ushort read_eeprom(int ioaddr, int index)
+{
+ outw(EEPROM_READ + index, ioaddr + 10);
+ /* Pause for at least 162 us. for the read to take place.
+ Some chips seem to require much longer */
+ mdelay(2);
+ return inw(ioaddr + 12);
+}
+
+/* Read a word from the EEPROM when in the ISA ID probe state. */
+static ushort __init id_read_eeprom(int index)
+{
+ int bit, word = 0;
+
+ /* Issue read command, and pause for at least 162 us. for it to complete.
+ Assume extra-fast 16Mhz bus. */
+ outb(EEPROM_READ + index, id_port);
+
+ /* Pause for at least 162 us. for the read to take place. */
+ /* Some chips seem to require much longer */
+ mdelay(4);
+
+ for (bit = 15; bit >= 0; bit--)
+ word = (word << 1) + (inb(id_port) & 0x01);
+
+ if (el3_debug > 3)
+ printk(" 3c509 EEPROM word %d %#4.4x.\n", index, word);
+
+ return word;
+}
+
+
+static int
+el3_open(struct net_device *dev)
+{
+ int ioaddr = dev->base_addr;
+ int i;
+
+ outw(TxReset, ioaddr + EL3_CMD);
+ outw(RxReset, ioaddr + EL3_CMD);
+ outw(SetStatusEnb | 0x00, ioaddr + EL3_CMD);
+
+ i = request_irq(dev->irq, &el3_interrupt, 0, dev->name, dev);
+ if (i)
+ return i;
+
+ EL3WINDOW(0);
+ if (el3_debug > 3)
+ printk("%s: Opening, IRQ %d status@%x %4.4x.\n", dev->name,
+ dev->irq, ioaddr + EL3_STATUS, inw(ioaddr + EL3_STATUS));
+
+ el3_up(dev);
+
+ if (el3_debug > 3)
+ printk("%s: Opened 3c509 IRQ %d status %4.4x.\n",
+ dev->name, dev->irq, inw(ioaddr + EL3_STATUS));
+
+ return 0;
+}
+
+static void
+el3_tx_timeout (struct net_device *dev)
+{
+ struct el3_private *lp = netdev_priv(dev);
+ int ioaddr = dev->base_addr;
+
+ /* Transmitter timeout, serious problems. */
+ printk("%s: transmit timed out, Tx_status %2.2x status %4.4x "
+ "Tx FIFO room %d.\n",
+ dev->name, inb(ioaddr + TX_STATUS), inw(ioaddr + EL3_STATUS),
+ inw(ioaddr + TX_FREE));
+ lp->stats.tx_errors++;
+ dev->trans_start = jiffies;
+ /* Issue TX_RESET and TX_START commands. */
+ outw(TxReset, ioaddr + EL3_CMD);
+ outw(TxEnable, ioaddr + EL3_CMD);
+ netif_wake_queue(dev);
+}
+
+
+static int
+el3_start_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+ struct el3_private *lp = netdev_priv(dev);
+ int ioaddr = dev->base_addr;
+ unsigned long flags;
+
+ netif_stop_queue (dev);
+
+ lp->stats.tx_bytes += skb->len;
+
+ if (el3_debug > 4) {
+ printk("%s: el3_start_xmit(length = %u) called, status %4.4x.\n",
+ dev->name, skb->len, inw(ioaddr + EL3_STATUS));
+ }
+#if 0
+#ifndef final_version
+ { /* Error-checking code, delete someday. */
+ ushort status = inw(ioaddr + EL3_STATUS);
+ if (status & 0x0001 /* IRQ line active, missed one. */
+ && inw(ioaddr + EL3_STATUS) & 1) { /* Make sure. */
+ printk("%s: Missed interrupt, status then %04x now %04x"
+ " Tx %2.2x Rx %4.4x.\n", dev->name, status,
+ inw(ioaddr + EL3_STATUS), inb(ioaddr + TX_STATUS),
+ inw(ioaddr + RX_STATUS));
+ /* Fake interrupt trigger by masking, acknowledge interrupts. */
+ outw(SetStatusEnb | 0x00, ioaddr + EL3_CMD);
+ outw(AckIntr | IntLatch | TxAvailable | RxEarly | IntReq,
+ ioaddr + EL3_CMD);
+ outw(SetStatusEnb | 0xff, ioaddr + EL3_CMD);
+ }
+ }
+#endif
+#endif
+ /*
+ * We lock the driver against other processors. Note
+ * we don't need to lock versus the IRQ as we suspended
+ * that. This means that we lose the ability to take
+ * an RX during a TX upload. That sucks a bit with SMP
+ * on an original 3c509 (2K buffer)
+ *
+ * Using disable_irq stops us crapping on other
+ * time sensitive devices.
+ */
+
+ spin_lock_irqsave(&lp->lock, flags);
+
+ /* Put out the doubleword header... */
+ outw(skb->len, ioaddr + TX_FIFO);
+ outw(0x00, ioaddr + TX_FIFO);
+ /* ... and the packet rounded to a doubleword. */
+#ifdef __powerpc__
+ outsl_ns(ioaddr + TX_FIFO, skb->data, (skb->len + 3) >> 2);
+#else
+ outsl(ioaddr + TX_FIFO, skb->data, (skb->len + 3) >> 2);
+#endif
+
+ dev->trans_start = jiffies;
+ if (inw(ioaddr + TX_FREE) > 1536)
+ netif_start_queue(dev);
+ else
+ /* Interrupt us when the FIFO has room for max-sized packet. */
+ outw(SetTxThreshold + 1536, ioaddr + EL3_CMD);
+
+ spin_unlock_irqrestore(&lp->lock, flags);
+
+ dev_kfree_skb (skb);
+
+ /* Clear the Tx status stack. */
+ {
+ short tx_status;
+ int i = 4;
+
+ while (--i > 0 && (tx_status = inb(ioaddr + TX_STATUS)) > 0) {
+ if (tx_status & 0x38) lp->stats.tx_aborted_errors++;
+ if (tx_status & 0x30) outw(TxReset, ioaddr + EL3_CMD);
+ if (tx_status & 0x3C) outw(TxEnable, ioaddr + EL3_CMD);
+ outb(0x00, ioaddr + TX_STATUS); /* Pop the status stack. */
+ }
+ }
+ return 0;
+}
+
+/* The EL3 interrupt handler. */
+static irqreturn_t
+el3_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct net_device *dev = (struct net_device *)dev_id;
+ struct el3_private *lp;
+ int ioaddr, status;
+ int i = max_interrupt_work;
+
+ if (dev == NULL) {
+ printk ("el3_interrupt(): irq %d for unknown device.\n", irq);
+ return IRQ_NONE;
+ }
+
+ lp = netdev_priv(dev);
+ spin_lock(&lp->lock);
+
+ ioaddr = dev->base_addr;
+
+ if (el3_debug > 4) {
+ status = inw(ioaddr + EL3_STATUS);
+ printk("%s: interrupt, status %4.4x.\n", dev->name, status);
+ }
+
+ while ((status = inw(ioaddr + EL3_STATUS)) &
+ (IntLatch | RxComplete | StatsFull)) {
+
+ if (status & RxComplete)
+ el3_rx(dev);
+
+ if (status & TxAvailable) {
+ if (el3_debug > 5)
+ printk(" TX room bit was handled.\n");
+ /* There's room in the FIFO for a full-sized packet. */
+ outw(AckIntr | TxAvailable, ioaddr + EL3_CMD);
+ netif_wake_queue (dev);
+ }
+ if (status & (AdapterFailure | RxEarly | StatsFull | TxComplete)) {
+ /* Handle all uncommon interrupts. */
+ if (status & StatsFull) /* Empty statistics. */
+ update_stats(dev);
+ if (status & RxEarly) { /* Rx early is unused. */
+ el3_rx(dev);
+ outw(AckIntr | RxEarly, ioaddr + EL3_CMD);
+ }
+ if (status & TxComplete) { /* Really Tx error. */
+ struct el3_private *lp = netdev_priv(dev);
+ short tx_status;
+ int i = 4;
+
+ while (--i>0 && (tx_status = inb(ioaddr + TX_STATUS)) > 0) {
+ if (tx_status & 0x38) lp->stats.tx_aborted_errors++;
+ if (tx_status & 0x30) outw(TxReset, ioaddr + EL3_CMD);
+ if (tx_status & 0x3C) outw(TxEnable, ioaddr + EL3_CMD);
+ outb(0x00, ioaddr + TX_STATUS); /* Pop the status stack. */
+ }
+ }
+ if (status & AdapterFailure) {
+ /* Adapter failure requires Rx reset and reinit. */
+ outw(RxReset, ioaddr + EL3_CMD);
+ /* Set the Rx filter to the current state. */
+ outw(SetRxFilter | RxStation | RxBroadcast
+ | (dev->flags & IFF_ALLMULTI ? RxMulticast : 0)
+ | (dev->flags & IFF_PROMISC ? RxProm : 0),
+ ioaddr + EL3_CMD);
+ outw(RxEnable, ioaddr + EL3_CMD); /* Re-enable the receiver. */
+ outw(AckIntr | AdapterFailure, ioaddr + EL3_CMD);
+ }
+ }
+
+ if (--i < 0) {
+ printk("%s: Infinite loop in interrupt, status %4.4x.\n",
+ dev->name, status);
+ /* Clear all interrupts. */
+ outw(AckIntr | 0xFF, ioaddr + EL3_CMD);
+ break;
+ }
+ /* Acknowledge the IRQ. */
+ outw(AckIntr | IntReq | IntLatch, ioaddr + EL3_CMD); /* Ack IRQ */
+ }
+
+ if (el3_debug > 4) {
+ printk("%s: exiting interrupt, status %4.4x.\n", dev->name,
+ inw(ioaddr + EL3_STATUS));
+ }
+ spin_unlock(&lp->lock);
+ return IRQ_HANDLED;
+}
+
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+/*
+ * Polling receive - used by netconsole and other diagnostic tools
+ * to allow network i/o with interrupts disabled.
+ */
+static void el3_poll_controller(struct net_device *dev)
+{
+ disable_irq(dev->irq);
+ el3_interrupt(dev->irq, dev, NULL);
+ enable_irq(dev->irq);
+}
+#endif
+
+static struct net_device_stats *
+el3_get_stats(struct net_device *dev)
+{
+ struct el3_private *lp = netdev_priv(dev);
+ unsigned long flags;
+
+ /*
+ * This is fast enough not to bother with disable IRQ
+ * stuff.
+ */
+
+ spin_lock_irqsave(&lp->lock, flags);
+ update_stats(dev);
+ spin_unlock_irqrestore(&lp->lock, flags);
+ return &lp->stats;
+}
+
+/* Update statistics. We change to register window 6, so this should be run
+ single-threaded if the device is active. This is expected to be a rare
+ operation, and it's simpler for the rest of the driver to assume that
+ window 1 is always valid rather than use a special window-state variable.
+ */
+static void update_stats(struct net_device *dev)
+{
+ struct el3_private *lp = netdev_priv(dev);
+ int ioaddr = dev->base_addr;
+
+ if (el3_debug > 5)
+ printk(" Updating the statistics.\n");
+ /* Turn off statistics updates while reading. */
+ outw(StatsDisable, ioaddr + EL3_CMD);
+ /* Switch to the stats window, and read everything. */
+ EL3WINDOW(6);
+ lp->stats.tx_carrier_errors += inb(ioaddr + 0);
+ lp->stats.tx_heartbeat_errors += inb(ioaddr + 1);
+ /* Multiple collisions. */ inb(ioaddr + 2);
+ lp->stats.collisions += inb(ioaddr + 3);
+ lp->stats.tx_window_errors += inb(ioaddr + 4);
+ lp->stats.rx_fifo_errors += inb(ioaddr + 5);
+ lp->stats.tx_packets += inb(ioaddr + 6);
+ /* Rx packets */ inb(ioaddr + 7);
+ /* Tx deferrals */ inb(ioaddr + 8);
+ inw(ioaddr + 10); /* Total Rx and Tx octets. */
+ inw(ioaddr + 12);
+
+ /* Back to window 1, and turn statistics back on. */
+ EL3WINDOW(1);
+ outw(StatsEnable, ioaddr + EL3_CMD);
+ return;
+}
+
+static int
+el3_rx(struct net_device *dev)
+{
+ struct el3_private *lp = netdev_priv(dev);
+ int ioaddr = dev->base_addr;
+ short rx_status;
+
+ if (el3_debug > 5)
+ printk(" In rx_packet(), status %4.4x, rx_status %4.4x.\n",
+ inw(ioaddr+EL3_STATUS), inw(ioaddr+RX_STATUS));
+ while ((rx_status = inw(ioaddr + RX_STATUS)) > 0) {
+ if (rx_status & 0x4000) { /* Error, update stats. */
+ short error = rx_status & 0x3800;
+
+ outw(RxDiscard, ioaddr + EL3_CMD);
+ lp->stats.rx_errors++;
+ switch (error) {
+ case 0x0000: lp->stats.rx_over_errors++; break;
+ case 0x0800: lp->stats.rx_length_errors++; break;
+ case 0x1000: lp->stats.rx_frame_errors++; break;
+ case 0x1800: lp->stats.rx_length_errors++; break;
+ case 0x2000: lp->stats.rx_frame_errors++; break;
+ case 0x2800: lp->stats.rx_crc_errors++; break;
+ }
+ } else {
+ short pkt_len = rx_status & 0x7ff;
+ struct sk_buff *skb;
+
+ skb = dev_alloc_skb(pkt_len+5);
+ lp->stats.rx_bytes += pkt_len;
+ if (el3_debug > 4)
+ printk("Receiving packet size %d status %4.4x.\n",
+ pkt_len, rx_status);
+ if (skb != NULL) {
+ skb->dev = dev;
+ skb_reserve(skb, 2); /* Align IP on 16 byte */
+
+ /* 'skb->data' points to the start of sk_buff data area. */
+#ifdef __powerpc__
+ insl_ns(ioaddr+RX_FIFO, skb_put(skb,pkt_len),
+ (pkt_len + 3) >> 2);
+#else
+ insl(ioaddr + RX_FIFO, skb_put(skb,pkt_len),
+ (pkt_len + 3) >> 2);
+#endif
+
+ outw(RxDiscard, ioaddr + EL3_CMD); /* Pop top Rx packet. */
+ skb->protocol = eth_type_trans(skb,dev);
+ netif_rx(skb);
+ dev->last_rx = jiffies;
+ lp->stats.rx_packets++;
+ continue;
+ }
+ outw(RxDiscard, ioaddr + EL3_CMD);
+ lp->stats.rx_dropped++;
+ if (el3_debug)
+ printk("%s: Couldn't allocate a sk_buff of size %d.\n",
+ dev->name, pkt_len);
+ }
+ inw(ioaddr + EL3_STATUS); /* Delay. */
+ while (inw(ioaddr + EL3_STATUS) & 0x1000)
+ printk(KERN_DEBUG " Waiting for 3c509 to discard packet, status %x.\n",
+ inw(ioaddr + EL3_STATUS) );
+ }
+
+ return 0;
+}
+
+/*
+ * Set or clear the multicast filter for this adaptor.
+ */
+static void
+set_multicast_list(struct net_device *dev)
+{
+ unsigned long flags;
+ struct el3_private *lp = netdev_priv(dev);
+ int ioaddr = dev->base_addr;
+
+ if (el3_debug > 1) {
+ static int old;
+ if (old != dev->mc_count) {
+ old = dev->mc_count;
+ printk("%s: Setting Rx mode to %d addresses.\n", dev->name, dev->mc_count);
+ }
+ }
+ spin_lock_irqsave(&lp->lock, flags);
+ if (dev->flags&IFF_PROMISC) {
+ outw(SetRxFilter | RxStation | RxMulticast | RxBroadcast | RxProm,
+ ioaddr + EL3_CMD);
+ }
+ else if (dev->mc_count || (dev->flags&IFF_ALLMULTI)) {
+ outw(SetRxFilter | RxStation | RxMulticast | RxBroadcast, ioaddr + EL3_CMD);
+ }
+ else
+ outw(SetRxFilter | RxStation | RxBroadcast, ioaddr + EL3_CMD);
+ spin_unlock_irqrestore(&lp->lock, flags);
+}
+
+static int
+el3_close(struct net_device *dev)
+{
+ int ioaddr = dev->base_addr;
+ struct el3_private *lp = netdev_priv(dev);
+
+ if (el3_debug > 2)
+ printk("%s: Shutting down ethercard.\n", dev->name);
+
+ el3_down(dev);
+
+ free_irq(dev->irq, dev);
+ /* Switching back to window 0 disables the IRQ. */
+ EL3WINDOW(0);
+ if (lp->type != EL3_EISA) {
+ /* But we explicitly zero the IRQ line select anyway. Don't do
+ * it on EISA cards, it prevents the module from getting an
+ * IRQ after unload+reload... */
+ outw(0x0f00, ioaddr + WN0_IRQ);
+ }
+
+ return 0;
+}
+
+static int
+el3_link_ok(struct net_device *dev)
+{
+ int ioaddr = dev->base_addr;
+ u16 tmp;
+
+ EL3WINDOW(4);
+ tmp = inw(ioaddr + WN4_MEDIA);
+ EL3WINDOW(1);
+ return tmp & (1<<11);
+}
+
+static int
+el3_netdev_get_ecmd(struct net_device *dev, struct ethtool_cmd *ecmd)
+{
+ u16 tmp;
+ int ioaddr = dev->base_addr;
+
+ EL3WINDOW(0);
+ /* obtain current transceiver via WN4_MEDIA? */
+ tmp = inw(ioaddr + WN0_ADDR_CONF);
+ ecmd->transceiver = XCVR_INTERNAL;
+ switch (tmp >> 14) {
+ case 0:
+ ecmd->port = PORT_TP;
+ break;
+ case 1:
+ ecmd->port = PORT_AUI;
+ ecmd->transceiver = XCVR_EXTERNAL;
+ break;
+ case 3:
+ ecmd->port = PORT_BNC;
+ default:
+ break;
+ }
+
+ ecmd->duplex = DUPLEX_HALF;
+ ecmd->supported = 0;
+ tmp = inw(ioaddr + WN0_CONF_CTRL);
+ if (tmp & (1<<13))
+ ecmd->supported |= SUPPORTED_AUI;
+ if (tmp & (1<<12))
+ ecmd->supported |= SUPPORTED_BNC;
+ if (tmp & (1<<9)) {
+ ecmd->supported |= SUPPORTED_TP | SUPPORTED_10baseT_Half |
+ SUPPORTED_10baseT_Full; /* hmm... */
+ EL3WINDOW(4);
+ tmp = inw(ioaddr + WN4_NETDIAG);
+ if (tmp & FD_ENABLE)
+ ecmd->duplex = DUPLEX_FULL;
+ }
+
+ ecmd->speed = SPEED_10;
+ EL3WINDOW(1);
+ return 0;
+}
+
+static int
+el3_netdev_set_ecmd(struct net_device *dev, struct ethtool_cmd *ecmd)
+{
+ u16 tmp;
+ int ioaddr = dev->base_addr;
+
+ if (ecmd->speed != SPEED_10)
+ return -EINVAL;
+ if ((ecmd->duplex != DUPLEX_HALF) && (ecmd->duplex != DUPLEX_FULL))
+ return -EINVAL;
+ if ((ecmd->transceiver != XCVR_INTERNAL) && (ecmd->transceiver != XCVR_EXTERNAL))
+ return -EINVAL;
+
+ /* change XCVR type */
+ EL3WINDOW(0);
+ tmp = inw(ioaddr + WN0_ADDR_CONF);
+ switch (ecmd->port) {
+ case PORT_TP:
+ tmp &= ~(3<<14);
+ dev->if_port = 0;
+ break;
+ case PORT_AUI:
+ tmp |= (1<<14);
+ dev->if_port = 1;
+ break;
+ case PORT_BNC:
+ tmp |= (3<<14);
+ dev->if_port = 3;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ outw(tmp, ioaddr + WN0_ADDR_CONF);
+ if (dev->if_port == 3) {
+ /* fire up the DC-DC convertor if BNC gets enabled */
+ tmp = inw(ioaddr + WN0_ADDR_CONF);
+ if (tmp & (3 << 14)) {
+ outw(StartCoax, ioaddr + EL3_CMD);
+ udelay(800);
+ } else
+ return -EIO;
+ }
+
+ EL3WINDOW(4);
+ tmp = inw(ioaddr + WN4_NETDIAG);
+ if (ecmd->duplex == DUPLEX_FULL)
+ tmp |= FD_ENABLE;
+ else
+ tmp &= ~FD_ENABLE;
+ outw(tmp, ioaddr + WN4_NETDIAG);
+ EL3WINDOW(1);
+
+ return 0;
+}
+
+static void el3_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
+{
+ strcpy(info->driver, DRV_NAME);
+ strcpy(info->version, DRV_VERSION);
+}
+
+static int el3_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
+{
+ struct el3_private *lp = netdev_priv(dev);
+ int ret;
+
+ spin_lock_irq(&lp->lock);
+ ret = el3_netdev_get_ecmd(dev, ecmd);
+ spin_unlock_irq(&lp->lock);
+ return ret;
+}
+
+static int el3_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
+{
+ struct el3_private *lp = netdev_priv(dev);
+ int ret;
+
+ spin_lock_irq(&lp->lock);
+ ret = el3_netdev_set_ecmd(dev, ecmd);
+ spin_unlock_irq(&lp->lock);
+ return ret;
+}
+
+static u32 el3_get_link(struct net_device *dev)
+{
+ struct el3_private *lp = netdev_priv(dev);
+ u32 ret;
+
+ spin_lock_irq(&lp->lock);
+ ret = el3_link_ok(dev);
+ spin_unlock_irq(&lp->lock);
+ return ret;
+}
+
+static u32 el3_get_msglevel(struct net_device *dev)
+{
+ return el3_debug;
+}
+
+static void el3_set_msglevel(struct net_device *dev, u32 v)
+{
+ el3_debug = v;
+}
+
+static struct ethtool_ops ethtool_ops = {
+ .get_drvinfo = el3_get_drvinfo,
+ .get_settings = el3_get_settings,
+ .set_settings = el3_set_settings,
+ .get_link = el3_get_link,
+ .get_msglevel = el3_get_msglevel,
+ .set_msglevel = el3_set_msglevel,
+};
+
+static void
+el3_down(struct net_device *dev)
+{
+ int ioaddr = dev->base_addr;
+
+ netif_stop_queue(dev);
+
+ /* Turn off statistics ASAP. We update lp->stats below. */
+ outw(StatsDisable, ioaddr + EL3_CMD);
+
+ /* Disable the receiver and transmitter. */
+ outw(RxDisable, ioaddr + EL3_CMD);
+ outw(TxDisable, ioaddr + EL3_CMD);
+
+ if (dev->if_port == 3)
+ /* Turn off thinnet power. Green! */
+ outw(StopCoax, ioaddr + EL3_CMD);
+ else if (dev->if_port == 0) {
+ /* Disable link beat and jabber, if_port may change here next open(). */
+ EL3WINDOW(4);
+ outw(inw(ioaddr + WN4_MEDIA) & ~MEDIA_TP, ioaddr + WN4_MEDIA);
+ }
+
+ outw(SetIntrEnb | 0x0000, ioaddr + EL3_CMD);
+
+ update_stats(dev);
+}
+
+static void
+el3_up(struct net_device *dev)
+{
+ int i, sw_info, net_diag;
+ int ioaddr = dev->base_addr;
+
+ /* Activating the board required and does no harm otherwise */
+ outw(0x0001, ioaddr + 4);
+
+ /* Set the IRQ line. */
+ outw((dev->irq << 12) | 0x0f00, ioaddr + WN0_IRQ);
+
+ /* Set the station address in window 2 each time opened. */
+ EL3WINDOW(2);
+
+ for (i = 0; i < 6; i++)
+ outb(dev->dev_addr[i], ioaddr + i);
+
+ if ((dev->if_port & 0x03) == 3) /* BNC interface */
+ /* Start the thinnet transceiver. We should really wait 50ms...*/
+ outw(StartCoax, ioaddr + EL3_CMD);
+ else if ((dev->if_port & 0x03) == 0) { /* 10baseT interface */
+ /* Combine secondary sw_info word (the adapter level) and primary
+ sw_info word (duplex setting plus other useless bits) */
+ EL3WINDOW(0);
+ sw_info = (read_eeprom(ioaddr, 0x14) & 0x400f) |
+ (read_eeprom(ioaddr, 0x0d) & 0xBff0);
+
+ EL3WINDOW(4);
+ net_diag = inw(ioaddr + WN4_NETDIAG);
+ net_diag = (net_diag | FD_ENABLE); /* temporarily assume full-duplex will be set */
+ printk("%s: ", dev->name);
+ switch (dev->if_port & 0x0c) {
+ case 12:
+ /* force full-duplex mode if 3c5x9b */
+ if (sw_info & 0x000f) {
+ printk("Forcing 3c5x9b full-duplex mode");
+ break;
+ }
+ case 8:
+ /* set full-duplex mode based on eeprom config setting */
+ if ((sw_info & 0x000f) && (sw_info & 0x8000)) {
+ printk("Setting 3c5x9b full-duplex mode (from EEPROM configuration bit)");
+ break;
+ }
+ default:
+ /* xcvr=(0 || 4) OR user has an old 3c5x9 non "B" model */
+ printk("Setting 3c5x9/3c5x9B half-duplex mode");
+ net_diag = (net_diag & ~FD_ENABLE); /* disable full duplex */
+ }
+
+ outw(net_diag, ioaddr + WN4_NETDIAG);
+ printk(" if_port: %d, sw_info: %4.4x\n", dev->if_port, sw_info);
+ if (el3_debug > 3)
+ printk("%s: 3c5x9 net diag word is now: %4.4x.\n", dev->name, net_diag);
+ /* Enable link beat and jabber check. */
+ outw(inw(ioaddr + WN4_MEDIA) | MEDIA_TP, ioaddr + WN4_MEDIA);
+ }
+
+ /* Switch to the stats window, and clear all stats by reading. */
+ outw(StatsDisable, ioaddr + EL3_CMD);
+ EL3WINDOW(6);
+ for (i = 0; i < 9; i++)
+ inb(ioaddr + i);
+ inw(ioaddr + 10);
+ inw(ioaddr + 12);
+
+ /* Switch to register set 1 for normal use. */
+ EL3WINDOW(1);
+
+ /* Accept b-case and phys addr only. */
+ outw(SetRxFilter | RxStation | RxBroadcast, ioaddr + EL3_CMD);
+ outw(StatsEnable, ioaddr + EL3_CMD); /* Turn on statistics. */
+
+ outw(RxEnable, ioaddr + EL3_CMD); /* Enable the receiver. */
+ outw(TxEnable, ioaddr + EL3_CMD); /* Enable transmitter. */
+ /* Allow status bits to be seen. */
+ outw(SetStatusEnb | 0xff, ioaddr + EL3_CMD);
+ /* Ack all pending events, and set active indicator mask. */
+ outw(AckIntr | IntLatch | TxAvailable | RxEarly | IntReq,
+ ioaddr + EL3_CMD);
+ outw(SetIntrEnb | IntLatch|TxAvailable|TxComplete|RxComplete|StatsFull,
+ ioaddr + EL3_CMD);
+
+ netif_start_queue(dev);
+}
+
+/* Power Management support functions */
+#ifdef CONFIG_PM
+
+static int
+el3_suspend(struct pm_dev *pdev)
+{
+ unsigned long flags;
+ struct net_device *dev;
+ struct el3_private *lp;
+ int ioaddr;
+
+ if (!pdev && !pdev->data)
+ return -EINVAL;
+
+ dev = (struct net_device *)pdev->data;
+ lp = netdev_priv(dev);
+ ioaddr = dev->base_addr;
+
+ spin_lock_irqsave(&lp->lock, flags);
+
+ if (netif_running(dev))
+ netif_device_detach(dev);
+
+ el3_down(dev);
+ outw(PowerDown, ioaddr + EL3_CMD);
+
+ spin_unlock_irqrestore(&lp->lock, flags);
+ return 0;
+}
+
+static int
+el3_resume(struct pm_dev *pdev)
+{
+ unsigned long flags;
+ struct net_device *dev;
+ struct el3_private *lp;
+ int ioaddr;
+
+ if (!pdev && !pdev->data)
+ return -EINVAL;
+
+ dev = (struct net_device *)pdev->data;
+ lp = netdev_priv(dev);
+ ioaddr = dev->base_addr;
+
+ spin_lock_irqsave(&lp->lock, flags);
+
+ outw(PowerUp, ioaddr + EL3_CMD);
+ el3_up(dev);
+
+ if (netif_running(dev))
+ netif_device_attach(dev);
+
+ spin_unlock_irqrestore(&lp->lock, flags);
+ return 0;
+}
+
+static int
+el3_pm_callback(struct pm_dev *pdev, pm_request_t rqst, void *data)
+{
+ switch (rqst) {
+ case PM_SUSPEND:
+ return el3_suspend(pdev);
+
+ case PM_RESUME:
+ return el3_resume(pdev);
+ }
+ return 0;
+}
+
+#endif /* CONFIG_PM */
+
+/* Parameters that may be passed into the module. */
+static int debug = -1;
+static int irq[] = {-1, -1, -1, -1, -1, -1, -1, -1};
+static int xcvr[] = {-1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1};
+
+module_param(debug,int, 0);
+module_param_array(irq, int, NULL, 0);
+module_param_array(xcvr, int, NULL, 0);
+module_param(max_interrupt_work, int, 0);
+MODULE_PARM_DESC(debug, "debug level (0-6)");
+MODULE_PARM_DESC(irq, "IRQ number(s) (assigned)");
+MODULE_PARM_DESC(xcvr,"transceiver(s) (0=internal, 1=external)");
+MODULE_PARM_DESC(max_interrupt_work, "maximum events handled per interrupt");
+#if defined(__ISAPNP__)
+module_param(nopnp, int, 0);
+MODULE_PARM_DESC(nopnp, "disable ISA PnP support (0-1)");
+MODULE_DEVICE_TABLE(isapnp, el3_isapnp_adapters);
+#endif /* __ISAPNP__ */
+MODULE_DESCRIPTION("3Com Etherlink III (3c509, 3c509B) ISA/PnP ethernet driver");
+MODULE_LICENSE("GPL");
+
+static int __init el3_init_module(void)
+{
+ el3_cards = 0;
+
+ if (debug >= 0)
+ el3_debug = debug;
+
+ el3_root_dev = NULL;
+ while (el3_probe(el3_cards) == 0) {
+ if (irq[el3_cards] > 1)
+ el3_root_dev->irq = irq[el3_cards];
+ if (xcvr[el3_cards] >= 0)
+ el3_root_dev->if_port = xcvr[el3_cards];
+ el3_cards++;
+ }
+
+#ifdef CONFIG_EISA
+ if (eisa_driver_register (&el3_eisa_driver) < 0) {
+ eisa_driver_unregister (&el3_eisa_driver);
+ }
+#endif
+#ifdef CONFIG_MCA
+ mca_register_driver(&el3_mca_driver);
+#endif
+ return 0;
+}
+
+static void __exit el3_cleanup_module(void)
+{
+ struct net_device *next_dev;
+
+ while (el3_root_dev) {
+ struct el3_private *lp = netdev_priv(el3_root_dev);
+
+ next_dev = lp->next_dev;
+ el3_common_remove (el3_root_dev);
+ el3_root_dev = next_dev;
+ }
+
+#ifdef CONFIG_EISA
+ eisa_driver_unregister (&el3_eisa_driver);
+#endif
+#ifdef CONFIG_MCA
+ mca_unregister_driver(&el3_mca_driver);
+#endif
+}
+
+module_init (el3_init_module);
+module_exit (el3_cleanup_module);
+