Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/drivers/net/hamradio/yam.c b/drivers/net/hamradio/yam.c
new file mode 100644
index 0000000..fd7b00f
--- /dev/null
+++ b/drivers/net/hamradio/yam.c
@@ -0,0 +1,1218 @@
+/*****************************************************************************/
+
+/*
+ * yam.c -- YAM radio modem driver.
+ *
+ * Copyright (C) 1998 Frederic Rible F1OAT (frible@teaser.fr)
+ * Adapted from baycom.c driver written by Thomas Sailer (sailer@ife.ee.ethz.ch)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Please note that the GPL allows you to use the driver, NOT the radio.
+ * In order to use the radio, you need a license from the communications
+ * authority of your country.
+ *
+ *
+ * History:
+ * 0.0 F1OAT 06.06.98 Begin of work with baycom.c source code V 0.3
+ * 0.1 F1OAT 07.06.98 Add timer polling routine for channel arbitration
+ * 0.2 F6FBB 08.06.98 Added delay after FPGA programming
+ * 0.3 F6FBB 29.07.98 Delayed PTT implementation for dupmode=2
+ * 0.4 F6FBB 30.07.98 Added TxTail, Slottime and Persistance
+ * 0.5 F6FBB 01.08.98 Shared IRQs, /proc/net and network statistics
+ * 0.6 F6FBB 25.08.98 Added 1200Bds format
+ * 0.7 F6FBB 12.09.98 Added to the kernel configuration
+ * 0.8 F6FBB 14.10.98 Fixed slottime/persistence timing bug
+ * OK1ZIA 2.09.01 Fixed "kfree_skb on hard IRQ"
+ * using dev_kfree_skb_any(). (important in 2.4 kernel)
+ *
+ */
+
+/*****************************************************************************/
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/net.h>
+#include <linux/in.h>
+#include <linux/if.h>
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/bitops.h>
+#include <asm/io.h>
+#include <asm/system.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+
+#include <linux/netdevice.h>
+#include <linux/if_arp.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#if defined(CONFIG_AX25) || defined(CONFIG_AX25_MODULE)
+/* prototypes for ax25_encapsulate and ax25_rebuild_header */
+#include <net/ax25.h>
+#endif /* CONFIG_AX25 || CONFIG_AX25_MODULE */
+
+/* make genksyms happy */
+#include <linux/ip.h>
+#include <linux/udp.h>
+#include <linux/tcp.h>
+
+#include <linux/kernel.h>
+#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
+
+#include <asm/uaccess.h>
+#include <linux/init.h>
+
+#include <linux/yam.h>
+#include "yam9600.h"
+#include "yam1200.h"
+
+/* --------------------------------------------------------------------- */
+
+static const char yam_drvname[] = "yam";
+static char yam_drvinfo[] __initdata = KERN_INFO "YAM driver version 0.8 by F1OAT/F6FBB\n";
+
+/* --------------------------------------------------------------------- */
+
+#define YAM_9600 1
+#define YAM_1200 2
+
+#define NR_PORTS 4
+#define YAM_MAGIC 0xF10A7654
+
+/* Transmitter states */
+
+#define TX_OFF 0
+#define TX_HEAD 1
+#define TX_DATA 2
+#define TX_CRC1 3
+#define TX_CRC2 4
+#define TX_TAIL 5
+
+#define YAM_MAX_FRAME 1024
+
+#define DEFAULT_BITRATE 9600 /* bps */
+#define DEFAULT_HOLDD 10 /* sec */
+#define DEFAULT_TXD 300 /* ms */
+#define DEFAULT_TXTAIL 10 /* ms */
+#define DEFAULT_SLOT 100 /* ms */
+#define DEFAULT_PERS 64 /* 0->255 */
+
+struct yam_port {
+ int magic;
+ int bitrate;
+ int baudrate;
+ int iobase;
+ int irq;
+ int dupmode;
+
+ struct net_device *dev;
+
+ /* Stats section */
+
+ struct net_device_stats stats;
+
+ int nb_rxint;
+ int nb_mdint;
+
+ /* Parameters section */
+
+ int txd; /* tx delay */
+ int holdd; /* duplex ptt delay */
+ int txtail; /* txtail delay */
+ int slot; /* slottime */
+ int pers; /* persistence */
+
+ /* Tx section */
+
+ int tx_state;
+ int tx_count;
+ int slotcnt;
+ unsigned char tx_buf[YAM_MAX_FRAME];
+ int tx_len;
+ int tx_crcl, tx_crch;
+ struct sk_buff_head send_queue; /* Packets awaiting transmission */
+
+ /* Rx section */
+
+ int dcd;
+ unsigned char rx_buf[YAM_MAX_FRAME];
+ int rx_len;
+ int rx_crcl, rx_crch;
+};
+
+struct yam_mcs {
+ unsigned char bits[YAM_FPGA_SIZE];
+ int bitrate;
+ struct yam_mcs *next;
+};
+
+static struct net_device *yam_devs[NR_PORTS];
+
+static struct yam_mcs *yam_data;
+
+static char ax25_bcast[7] =
+{'Q' << 1, 'S' << 1, 'T' << 1, ' ' << 1, ' ' << 1, ' ' << 1, '0' << 1};
+static char ax25_test[7] =
+{'L' << 1, 'I' << 1, 'N' << 1, 'U' << 1, 'X' << 1, ' ' << 1, '1' << 1};
+
+static struct timer_list yam_timer = TIMER_INITIALIZER(NULL, 0, 0);
+
+/* --------------------------------------------------------------------- */
+
+#define RBR(iobase) (iobase+0)
+#define THR(iobase) (iobase+0)
+#define IER(iobase) (iobase+1)
+#define IIR(iobase) (iobase+2)
+#define FCR(iobase) (iobase+2)
+#define LCR(iobase) (iobase+3)
+#define MCR(iobase) (iobase+4)
+#define LSR(iobase) (iobase+5)
+#define MSR(iobase) (iobase+6)
+#define SCR(iobase) (iobase+7)
+#define DLL(iobase) (iobase+0)
+#define DLM(iobase) (iobase+1)
+
+#define YAM_EXTENT 8
+
+/* Interrupt Identification Register Bit Masks */
+#define IIR_NOPEND 1
+#define IIR_MSR 0
+#define IIR_TX 2
+#define IIR_RX 4
+#define IIR_LSR 6
+#define IIR_TIMEOUT 12 /* Fifo mode only */
+
+#define IIR_MASK 0x0F
+
+/* Interrupt Enable Register Bit Masks */
+#define IER_RX 1 /* enable rx interrupt */
+#define IER_TX 2 /* enable tx interrupt */
+#define IER_LSR 4 /* enable line status interrupts */
+#define IER_MSR 8 /* enable modem status interrupts */
+
+/* Modem Control Register Bit Masks */
+#define MCR_DTR 0x01 /* DTR output */
+#define MCR_RTS 0x02 /* RTS output */
+#define MCR_OUT1 0x04 /* OUT1 output (not accessible in RS232) */
+#define MCR_OUT2 0x08 /* Master Interrupt enable (must be set on PCs) */
+#define MCR_LOOP 0x10 /* Loopback enable */
+
+/* Modem Status Register Bit Masks */
+#define MSR_DCTS 0x01 /* Delta CTS input */
+#define MSR_DDSR 0x02 /* Delta DSR */
+#define MSR_DRIN 0x04 /* Delta RI */
+#define MSR_DDCD 0x08 /* Delta DCD */
+#define MSR_CTS 0x10 /* CTS input */
+#define MSR_DSR 0x20 /* DSR input */
+#define MSR_RING 0x40 /* RI input */
+#define MSR_DCD 0x80 /* DCD input */
+
+/* line status register bit mask */
+#define LSR_RXC 0x01
+#define LSR_OE 0x02
+#define LSR_PE 0x04
+#define LSR_FE 0x08
+#define LSR_BREAK 0x10
+#define LSR_THRE 0x20
+#define LSR_TSRE 0x40
+
+/* Line Control Register Bit Masks */
+#define LCR_DLAB 0x80
+#define LCR_BREAK 0x40
+#define LCR_PZERO 0x28
+#define LCR_PEVEN 0x18
+#define LCR_PODD 0x08
+#define LCR_STOP1 0x00
+#define LCR_STOP2 0x04
+#define LCR_BIT5 0x00
+#define LCR_BIT6 0x02
+#define LCR_BIT7 0x01
+#define LCR_BIT8 0x03
+
+/* YAM Modem <-> UART Port mapping */
+
+#define TX_RDY MSR_DCTS /* transmitter ready to send */
+#define RX_DCD MSR_DCD /* carrier detect */
+#define RX_FLAG MSR_RING /* hdlc flag received */
+#define FPGA_DONE MSR_DSR /* FPGA is configured */
+#define PTT_ON (MCR_RTS|MCR_OUT2) /* activate PTT */
+#define PTT_OFF (MCR_DTR|MCR_OUT2) /* release PTT */
+
+#define ENABLE_RXINT IER_RX /* enable uart rx interrupt during rx */
+#define ENABLE_TXINT IER_MSR /* enable uart ms interrupt during tx */
+#define ENABLE_RTXINT (IER_RX|IER_MSR) /* full duplex operations */
+
+
+/*************************************************************************
+* CRC Tables
+************************************************************************/
+
+static const unsigned char chktabl[256] =
+{0x00, 0x89, 0x12, 0x9b, 0x24, 0xad, 0x36, 0xbf, 0x48, 0xc1, 0x5a, 0xd3, 0x6c, 0xe5, 0x7e,
+ 0xf7, 0x81, 0x08, 0x93, 0x1a, 0xa5, 0x2c, 0xb7, 0x3e, 0xc9, 0x40, 0xdb, 0x52, 0xed, 0x64,
+ 0xff, 0x76, 0x02, 0x8b, 0x10, 0x99, 0x26, 0xaf, 0x34, 0xbd, 0x4a, 0xc3, 0x58, 0xd1, 0x6e,
+ 0xe7, 0x7c, 0xf5, 0x83, 0x0a, 0x91, 0x18, 0xa7, 0x2e, 0xb5, 0x3c, 0xcb, 0x42, 0xd9, 0x50,
+ 0xef, 0x66, 0xfd, 0x74, 0x04, 0x8d, 0x16, 0x9f, 0x20, 0xa9, 0x32, 0xbb, 0x4c, 0xc5, 0x5e,
+ 0xd7, 0x68, 0xe1, 0x7a, 0xf3, 0x85, 0x0c, 0x97, 0x1e, 0xa1, 0x28, 0xb3, 0x3a, 0xcd, 0x44,
+ 0xdf, 0x56, 0xe9, 0x60, 0xfb, 0x72, 0x06, 0x8f, 0x14, 0x9d, 0x22, 0xab, 0x30, 0xb9, 0x4e,
+ 0xc7, 0x5c, 0xd5, 0x6a, 0xe3, 0x78, 0xf1, 0x87, 0x0e, 0x95, 0x1c, 0xa3, 0x2a, 0xb1, 0x38,
+ 0xcf, 0x46, 0xdd, 0x54, 0xeb, 0x62, 0xf9, 0x70, 0x08, 0x81, 0x1a, 0x93, 0x2c, 0xa5, 0x3e,
+ 0xb7, 0x40, 0xc9, 0x52, 0xdb, 0x64, 0xed, 0x76, 0xff, 0x89, 0x00, 0x9b, 0x12, 0xad, 0x24,
+ 0xbf, 0x36, 0xc1, 0x48, 0xd3, 0x5a, 0xe5, 0x6c, 0xf7, 0x7e, 0x0a, 0x83, 0x18, 0x91, 0x2e,
+ 0xa7, 0x3c, 0xb5, 0x42, 0xcb, 0x50, 0xd9, 0x66, 0xef, 0x74, 0xfd, 0x8b, 0x02, 0x99, 0x10,
+ 0xaf, 0x26, 0xbd, 0x34, 0xc3, 0x4a, 0xd1, 0x58, 0xe7, 0x6e, 0xf5, 0x7c, 0x0c, 0x85, 0x1e,
+ 0x97, 0x28, 0xa1, 0x3a, 0xb3, 0x44, 0xcd, 0x56, 0xdf, 0x60, 0xe9, 0x72, 0xfb, 0x8d, 0x04,
+ 0x9f, 0x16, 0xa9, 0x20, 0xbb, 0x32, 0xc5, 0x4c, 0xd7, 0x5e, 0xe1, 0x68, 0xf3, 0x7a, 0x0e,
+ 0x87, 0x1c, 0x95, 0x2a, 0xa3, 0x38, 0xb1, 0x46, 0xcf, 0x54, 0xdd, 0x62, 0xeb, 0x70, 0xf9,
+ 0x8f, 0x06, 0x9d, 0x14, 0xab, 0x22, 0xb9, 0x30, 0xc7, 0x4e, 0xd5, 0x5c, 0xe3, 0x6a, 0xf1,
+ 0x78};
+static const unsigned char chktabh[256] =
+{0x00, 0x11, 0x23, 0x32, 0x46, 0x57, 0x65, 0x74, 0x8c, 0x9d, 0xaf, 0xbe, 0xca, 0xdb, 0xe9,
+ 0xf8, 0x10, 0x01, 0x33, 0x22, 0x56, 0x47, 0x75, 0x64, 0x9c, 0x8d, 0xbf, 0xae, 0xda, 0xcb,
+ 0xf9, 0xe8, 0x21, 0x30, 0x02, 0x13, 0x67, 0x76, 0x44, 0x55, 0xad, 0xbc, 0x8e, 0x9f, 0xeb,
+ 0xfa, 0xc8, 0xd9, 0x31, 0x20, 0x12, 0x03, 0x77, 0x66, 0x54, 0x45, 0xbd, 0xac, 0x9e, 0x8f,
+ 0xfb, 0xea, 0xd8, 0xc9, 0x42, 0x53, 0x61, 0x70, 0x04, 0x15, 0x27, 0x36, 0xce, 0xdf, 0xed,
+ 0xfc, 0x88, 0x99, 0xab, 0xba, 0x52, 0x43, 0x71, 0x60, 0x14, 0x05, 0x37, 0x26, 0xde, 0xcf,
+ 0xfd, 0xec, 0x98, 0x89, 0xbb, 0xaa, 0x63, 0x72, 0x40, 0x51, 0x25, 0x34, 0x06, 0x17, 0xef,
+ 0xfe, 0xcc, 0xdd, 0xa9, 0xb8, 0x8a, 0x9b, 0x73, 0x62, 0x50, 0x41, 0x35, 0x24, 0x16, 0x07,
+ 0xff, 0xee, 0xdc, 0xcd, 0xb9, 0xa8, 0x9a, 0x8b, 0x84, 0x95, 0xa7, 0xb6, 0xc2, 0xd3, 0xe1,
+ 0xf0, 0x08, 0x19, 0x2b, 0x3a, 0x4e, 0x5f, 0x6d, 0x7c, 0x94, 0x85, 0xb7, 0xa6, 0xd2, 0xc3,
+ 0xf1, 0xe0, 0x18, 0x09, 0x3b, 0x2a, 0x5e, 0x4f, 0x7d, 0x6c, 0xa5, 0xb4, 0x86, 0x97, 0xe3,
+ 0xf2, 0xc0, 0xd1, 0x29, 0x38, 0x0a, 0x1b, 0x6f, 0x7e, 0x4c, 0x5d, 0xb5, 0xa4, 0x96, 0x87,
+ 0xf3, 0xe2, 0xd0, 0xc1, 0x39, 0x28, 0x1a, 0x0b, 0x7f, 0x6e, 0x5c, 0x4d, 0xc6, 0xd7, 0xe5,
+ 0xf4, 0x80, 0x91, 0xa3, 0xb2, 0x4a, 0x5b, 0x69, 0x78, 0x0c, 0x1d, 0x2f, 0x3e, 0xd6, 0xc7,
+ 0xf5, 0xe4, 0x90, 0x81, 0xb3, 0xa2, 0x5a, 0x4b, 0x79, 0x68, 0x1c, 0x0d, 0x3f, 0x2e, 0xe7,
+ 0xf6, 0xc4, 0xd5, 0xa1, 0xb0, 0x82, 0x93, 0x6b, 0x7a, 0x48, 0x59, 0x2d, 0x3c, 0x0e, 0x1f,
+ 0xf7, 0xe6, 0xd4, 0xc5, 0xb1, 0xa0, 0x92, 0x83, 0x7b, 0x6a, 0x58, 0x49, 0x3d, 0x2c, 0x1e,
+ 0x0f};
+
+/*************************************************************************
+* FPGA functions
+************************************************************************/
+
+static void delay(int ms)
+{
+ unsigned long timeout = jiffies + ((ms * HZ) / 1000);
+ while (time_before(jiffies, timeout))
+ cpu_relax();
+}
+
+/*
+ * reset FPGA
+ */
+
+static void fpga_reset(int iobase)
+{
+ outb(0, IER(iobase));
+ outb(LCR_DLAB | LCR_BIT5, LCR(iobase));
+ outb(1, DLL(iobase));
+ outb(0, DLM(iobase));
+
+ outb(LCR_BIT5, LCR(iobase));
+ inb(LSR(iobase));
+ inb(MSR(iobase));
+ /* turn off FPGA supply voltage */
+ outb(MCR_OUT1 | MCR_OUT2, MCR(iobase));
+ delay(100);
+ /* turn on FPGA supply voltage again */
+ outb(MCR_DTR | MCR_RTS | MCR_OUT1 | MCR_OUT2, MCR(iobase));
+ delay(100);
+}
+
+/*
+ * send one byte to FPGA
+ */
+
+static int fpga_write(int iobase, unsigned char wrd)
+{
+ unsigned char bit;
+ int k;
+ unsigned long timeout = jiffies + HZ / 10;
+
+ for (k = 0; k < 8; k++) {
+ bit = (wrd & 0x80) ? (MCR_RTS | MCR_DTR) : MCR_DTR;
+ outb(bit | MCR_OUT1 | MCR_OUT2, MCR(iobase));
+ wrd <<= 1;
+ outb(0xfc, THR(iobase));
+ while ((inb(LSR(iobase)) & LSR_TSRE) == 0)
+ if (time_after(jiffies, timeout))
+ return -1;
+ }
+
+ return 0;
+}
+
+static unsigned char *add_mcs(unsigned char *bits, int bitrate)
+{
+ struct yam_mcs *p;
+
+ /* If it already exists, replace the bit data */
+ p = yam_data;
+ while (p) {
+ if (p->bitrate == bitrate) {
+ memcpy(p->bits, bits, YAM_FPGA_SIZE);
+ return p->bits;
+ }
+ p = p->next;
+ }
+
+ /* Allocate a new mcs */
+ if ((p = kmalloc(sizeof(struct yam_mcs), GFP_KERNEL)) == NULL) {
+ printk(KERN_WARNING "YAM: no memory to allocate mcs\n");
+ return NULL;
+ }
+ memcpy(p->bits, bits, YAM_FPGA_SIZE);
+ p->bitrate = bitrate;
+ p->next = yam_data;
+ yam_data = p;
+
+ return p->bits;
+}
+
+static unsigned char *get_mcs(int bitrate)
+{
+ struct yam_mcs *p;
+
+ p = yam_data;
+ while (p) {
+ if (p->bitrate == bitrate)
+ return p->bits;
+ p = p->next;
+ }
+
+ /* Load predefined mcs data */
+ switch (bitrate) {
+ case 1200:
+ return add_mcs(bits_1200, bitrate);
+ default:
+ return add_mcs(bits_9600, bitrate);
+ }
+}
+
+/*
+ * download bitstream to FPGA
+ * data is contained in bits[] array in yam1200.h resp. yam9600.h
+ */
+
+static int fpga_download(int iobase, int bitrate)
+{
+ int i, rc;
+ unsigned char *pbits;
+
+ pbits = get_mcs(bitrate);
+ if (pbits == NULL)
+ return -1;
+
+ fpga_reset(iobase);
+ for (i = 0; i < YAM_FPGA_SIZE; i++) {
+ if (fpga_write(iobase, pbits[i])) {
+ printk(KERN_ERR "yam: error in write cycle\n");
+ return -1; /* write... */
+ }
+ }
+
+ fpga_write(iobase, 0xFF);
+ rc = inb(MSR(iobase)); /* check DONE signal */
+
+ /* Needed for some hardwares */
+ delay(50);
+
+ return (rc & MSR_DSR) ? 0 : -1;
+}
+
+
+/************************************************************************
+* Serial port init
+************************************************************************/
+
+static void yam_set_uart(struct net_device *dev)
+{
+ struct yam_port *yp = netdev_priv(dev);
+ int divisor = 115200 / yp->baudrate;
+
+ outb(0, IER(dev->base_addr));
+ outb(LCR_DLAB | LCR_BIT8, LCR(dev->base_addr));
+ outb(divisor, DLL(dev->base_addr));
+ outb(0, DLM(dev->base_addr));
+ outb(LCR_BIT8, LCR(dev->base_addr));
+ outb(PTT_OFF, MCR(dev->base_addr));
+ outb(0x00, FCR(dev->base_addr));
+
+ /* Flush pending irq */
+
+ inb(RBR(dev->base_addr));
+ inb(MSR(dev->base_addr));
+
+ /* Enable rx irq */
+
+ outb(ENABLE_RTXINT, IER(dev->base_addr));
+}
+
+
+/* --------------------------------------------------------------------- */
+
+enum uart {
+ c_uart_unknown, c_uart_8250,
+ c_uart_16450, c_uart_16550, c_uart_16550A
+};
+
+static const char *uart_str[] =
+{"unknown", "8250", "16450", "16550", "16550A"};
+
+static enum uart yam_check_uart(unsigned int iobase)
+{
+ unsigned char b1, b2, b3;
+ enum uart u;
+ enum uart uart_tab[] =
+ {c_uart_16450, c_uart_unknown, c_uart_16550, c_uart_16550A};
+
+ b1 = inb(MCR(iobase));
+ outb(b1 | 0x10, MCR(iobase)); /* loopback mode */
+ b2 = inb(MSR(iobase));
+ outb(0x1a, MCR(iobase));
+ b3 = inb(MSR(iobase)) & 0xf0;
+ outb(b1, MCR(iobase)); /* restore old values */
+ outb(b2, MSR(iobase));
+ if (b3 != 0x90)
+ return c_uart_unknown;
+ inb(RBR(iobase));
+ inb(RBR(iobase));
+ outb(0x01, FCR(iobase)); /* enable FIFOs */
+ u = uart_tab[(inb(IIR(iobase)) >> 6) & 3];
+ if (u == c_uart_16450) {
+ outb(0x5a, SCR(iobase));
+ b1 = inb(SCR(iobase));
+ outb(0xa5, SCR(iobase));
+ b2 = inb(SCR(iobase));
+ if ((b1 != 0x5a) || (b2 != 0xa5))
+ u = c_uart_8250;
+ }
+ return u;
+}
+
+/******************************************************************************
+* Rx Section
+******************************************************************************/
+static inline void yam_rx_flag(struct net_device *dev, struct yam_port *yp)
+{
+ if (yp->dcd && yp->rx_len >= 3 && yp->rx_len < YAM_MAX_FRAME) {
+ int pkt_len = yp->rx_len - 2 + 1; /* -CRC + kiss */
+ struct sk_buff *skb;
+
+ if ((yp->rx_crch & yp->rx_crcl) != 0xFF) {
+ /* Bad crc */
+ } else {
+ if (!(skb = dev_alloc_skb(pkt_len))) {
+ printk(KERN_WARNING "%s: memory squeeze, dropping packet\n", dev->name);
+ ++yp->stats.rx_dropped;
+ } else {
+ unsigned char *cp;
+ skb->dev = dev;
+ cp = skb_put(skb, pkt_len);
+ *cp++ = 0; /* KISS kludge */
+ memcpy(cp, yp->rx_buf, pkt_len - 1);
+ skb->protocol = htons(ETH_P_AX25);
+ skb->mac.raw = skb->data;
+ netif_rx(skb);
+ dev->last_rx = jiffies;
+ ++yp->stats.rx_packets;
+ }
+ }
+ }
+ yp->rx_len = 0;
+ yp->rx_crcl = 0x21;
+ yp->rx_crch = 0xf3;
+}
+
+static inline void yam_rx_byte(struct net_device *dev, struct yam_port *yp, unsigned char rxb)
+{
+ if (yp->rx_len < YAM_MAX_FRAME) {
+ unsigned char c = yp->rx_crcl;
+ yp->rx_crcl = (chktabl[c] ^ yp->rx_crch);
+ yp->rx_crch = (chktabh[c] ^ rxb);
+ yp->rx_buf[yp->rx_len++] = rxb;
+ }
+}
+
+/********************************************************************************
+* TX Section
+********************************************************************************/
+
+static void ptt_on(struct net_device *dev)
+{
+ outb(PTT_ON, MCR(dev->base_addr));
+}
+
+static void ptt_off(struct net_device *dev)
+{
+ outb(PTT_OFF, MCR(dev->base_addr));
+}
+
+static int yam_send_packet(struct sk_buff *skb, struct net_device *dev)
+{
+ struct yam_port *yp = netdev_priv(dev);
+
+ skb_queue_tail(&yp->send_queue, skb);
+ dev->trans_start = jiffies;
+ return 0;
+}
+
+static void yam_start_tx(struct net_device *dev, struct yam_port *yp)
+{
+ if ((yp->tx_state == TX_TAIL) || (yp->txd == 0))
+ yp->tx_count = 1;
+ else
+ yp->tx_count = (yp->bitrate * yp->txd) / 8000;
+ yp->tx_state = TX_HEAD;
+ ptt_on(dev);
+}
+
+static unsigned short random_seed;
+
+static inline unsigned short random_num(void)
+{
+ random_seed = 28629 * random_seed + 157;
+ return random_seed;
+}
+
+static void yam_arbitrate(struct net_device *dev)
+{
+ struct yam_port *yp = netdev_priv(dev);
+
+ if (yp->magic != YAM_MAGIC || yp->tx_state != TX_OFF ||
+ skb_queue_empty(&yp->send_queue))
+ return;
+ /* tx_state is TX_OFF and there is data to send */
+
+ if (yp->dupmode) {
+ /* Full duplex mode, don't wait */
+ yam_start_tx(dev, yp);
+ return;
+ }
+ if (yp->dcd) {
+ /* DCD on, wait slotime ... */
+ yp->slotcnt = yp->slot / 10;
+ return;
+ }
+ /* Is slottime passed ? */
+ if ((--yp->slotcnt) > 0)
+ return;
+
+ yp->slotcnt = yp->slot / 10;
+
+ /* is random > persist ? */
+ if ((random_num() % 256) > yp->pers)
+ return;
+
+ yam_start_tx(dev, yp);
+}
+
+static void yam_dotimer(unsigned long dummy)
+{
+ int i;
+
+ for (i = 0; i < NR_PORTS; i++) {
+ struct net_device *dev = yam_devs[i];
+ if (dev && netif_running(dev))
+ yam_arbitrate(dev);
+ }
+ yam_timer.expires = jiffies + HZ / 100;
+ add_timer(&yam_timer);
+}
+
+static void yam_tx_byte(struct net_device *dev, struct yam_port *yp)
+{
+ struct sk_buff *skb;
+ unsigned char b, temp;
+
+ switch (yp->tx_state) {
+ case TX_OFF:
+ break;
+ case TX_HEAD:
+ if (--yp->tx_count <= 0) {
+ if (!(skb = skb_dequeue(&yp->send_queue))) {
+ ptt_off(dev);
+ yp->tx_state = TX_OFF;
+ break;
+ }
+ yp->tx_state = TX_DATA;
+ if (skb->data[0] != 0) {
+/* do_kiss_params(s, skb->data, skb->len); */
+ dev_kfree_skb_any(skb);
+ break;
+ }
+ yp->tx_len = skb->len - 1; /* strip KISS byte */
+ if (yp->tx_len >= YAM_MAX_FRAME || yp->tx_len < 2) {
+ dev_kfree_skb_any(skb);
+ break;
+ }
+ memcpy(yp->tx_buf, skb->data + 1, yp->tx_len);
+ dev_kfree_skb_any(skb);
+ yp->tx_count = 0;
+ yp->tx_crcl = 0x21;
+ yp->tx_crch = 0xf3;
+ yp->tx_state = TX_DATA;
+ }
+ break;
+ case TX_DATA:
+ b = yp->tx_buf[yp->tx_count++];
+ outb(b, THR(dev->base_addr));
+ temp = yp->tx_crcl;
+ yp->tx_crcl = chktabl[temp] ^ yp->tx_crch;
+ yp->tx_crch = chktabh[temp] ^ b;
+ if (yp->tx_count >= yp->tx_len) {
+ yp->tx_state = TX_CRC1;
+ }
+ break;
+ case TX_CRC1:
+ yp->tx_crch = chktabl[yp->tx_crcl] ^ yp->tx_crch;
+ yp->tx_crcl = chktabh[yp->tx_crcl] ^ chktabl[yp->tx_crch] ^ 0xff;
+ outb(yp->tx_crcl, THR(dev->base_addr));
+ yp->tx_state = TX_CRC2;
+ break;
+ case TX_CRC2:
+ outb(chktabh[yp->tx_crch] ^ 0xFF, THR(dev->base_addr));
+ if (skb_queue_empty(&yp->send_queue)) {
+ yp->tx_count = (yp->bitrate * yp->txtail) / 8000;
+ if (yp->dupmode == 2)
+ yp->tx_count += (yp->bitrate * yp->holdd) / 8;
+ if (yp->tx_count == 0)
+ yp->tx_count = 1;
+ yp->tx_state = TX_TAIL;
+ } else {
+ yp->tx_count = 1;
+ yp->tx_state = TX_HEAD;
+ }
+ ++yp->stats.tx_packets;
+ break;
+ case TX_TAIL:
+ if (--yp->tx_count <= 0) {
+ yp->tx_state = TX_OFF;
+ ptt_off(dev);
+ }
+ break;
+ }
+}
+
+/***********************************************************************************
+* ISR routine
+************************************************************************************/
+
+static irqreturn_t yam_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct net_device *dev;
+ struct yam_port *yp;
+ unsigned char iir;
+ int counter = 100;
+ int i;
+ int handled = 0;
+
+ for (i = 0; i < NR_PORTS; i++) {
+ dev = yam_devs[i];
+ yp = netdev_priv(dev);
+
+ if (!netif_running(dev))
+ continue;
+
+ while ((iir = IIR_MASK & inb(IIR(dev->base_addr))) != IIR_NOPEND) {
+ unsigned char msr = inb(MSR(dev->base_addr));
+ unsigned char lsr = inb(LSR(dev->base_addr));
+ unsigned char rxb;
+
+ handled = 1;
+
+ if (lsr & LSR_OE)
+ ++yp->stats.rx_fifo_errors;
+
+ yp->dcd = (msr & RX_DCD) ? 1 : 0;
+
+ if (--counter <= 0) {
+ printk(KERN_ERR "%s: too many irq iir=%d\n",
+ dev->name, iir);
+ goto out;
+ }
+ if (msr & TX_RDY) {
+ ++yp->nb_mdint;
+ yam_tx_byte(dev, yp);
+ }
+ if (lsr & LSR_RXC) {
+ ++yp->nb_rxint;
+ rxb = inb(RBR(dev->base_addr));
+ if (msr & RX_FLAG)
+ yam_rx_flag(dev, yp);
+ else
+ yam_rx_byte(dev, yp, rxb);
+ }
+ }
+ }
+out:
+ return IRQ_RETVAL(handled);
+}
+
+#ifdef CONFIG_PROC_FS
+
+static void *yam_seq_start(struct seq_file *seq, loff_t *pos)
+{
+ return (*pos < NR_PORTS) ? yam_devs[*pos] : NULL;
+}
+
+static void *yam_seq_next(struct seq_file *seq, void *v, loff_t *pos)
+{
+ ++*pos;
+ return (*pos < NR_PORTS) ? yam_devs[*pos] : NULL;
+}
+
+static void yam_seq_stop(struct seq_file *seq, void *v)
+{
+}
+
+static int yam_seq_show(struct seq_file *seq, void *v)
+{
+ struct net_device *dev = v;
+ const struct yam_port *yp = netdev_priv(dev);
+
+ seq_printf(seq, "Device %s\n", dev->name);
+ seq_printf(seq, " Up %d\n", netif_running(dev));
+ seq_printf(seq, " Speed %u\n", yp->bitrate);
+ seq_printf(seq, " IoBase 0x%x\n", yp->iobase);
+ seq_printf(seq, " BaudRate %u\n", yp->baudrate);
+ seq_printf(seq, " IRQ %u\n", yp->irq);
+ seq_printf(seq, " TxState %u\n", yp->tx_state);
+ seq_printf(seq, " Duplex %u\n", yp->dupmode);
+ seq_printf(seq, " HoldDly %u\n", yp->holdd);
+ seq_printf(seq, " TxDelay %u\n", yp->txd);
+ seq_printf(seq, " TxTail %u\n", yp->txtail);
+ seq_printf(seq, " SlotTime %u\n", yp->slot);
+ seq_printf(seq, " Persist %u\n", yp->pers);
+ seq_printf(seq, " TxFrames %lu\n", yp->stats.tx_packets);
+ seq_printf(seq, " RxFrames %lu\n", yp->stats.rx_packets);
+ seq_printf(seq, " TxInt %u\n", yp->nb_mdint);
+ seq_printf(seq, " RxInt %u\n", yp->nb_rxint);
+ seq_printf(seq, " RxOver %lu\n", yp->stats.rx_fifo_errors);
+ seq_printf(seq, "\n");
+ return 0;
+}
+
+static struct seq_operations yam_seqops = {
+ .start = yam_seq_start,
+ .next = yam_seq_next,
+ .stop = yam_seq_stop,
+ .show = yam_seq_show,
+};
+
+static int yam_info_open(struct inode *inode, struct file *file)
+{
+ return seq_open(file, &yam_seqops);
+}
+
+static struct file_operations yam_info_fops = {
+ .owner = THIS_MODULE,
+ .open = yam_info_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = seq_release,
+};
+
+#endif
+
+
+/* --------------------------------------------------------------------- */
+
+static struct net_device_stats *yam_get_stats(struct net_device *dev)
+{
+ struct yam_port *yp;
+
+ if (!dev)
+ return NULL;
+
+ yp = netdev_priv(dev);
+ if (yp->magic != YAM_MAGIC)
+ return NULL;
+
+ /*
+ * Get the current statistics. This may be called with the
+ * card open or closed.
+ */
+ return &yp->stats;
+}
+
+/* --------------------------------------------------------------------- */
+
+static int yam_open(struct net_device *dev)
+{
+ struct yam_port *yp = netdev_priv(dev);
+ enum uart u;
+ int i;
+ int ret=0;
+
+ printk(KERN_INFO "Trying %s at iobase 0x%lx irq %u\n", dev->name, dev->base_addr, dev->irq);
+
+ if (!dev || !yp->bitrate)
+ return -ENXIO;
+ if (!dev->base_addr || dev->base_addr > 0x1000 - YAM_EXTENT ||
+ dev->irq < 2 || dev->irq > 15) {
+ return -ENXIO;
+ }
+ if (!request_region(dev->base_addr, YAM_EXTENT, dev->name))
+ {
+ printk(KERN_ERR "%s: cannot 0x%lx busy\n", dev->name, dev->base_addr);
+ return -EACCES;
+ }
+ if ((u = yam_check_uart(dev->base_addr)) == c_uart_unknown) {
+ printk(KERN_ERR "%s: cannot find uart type\n", dev->name);
+ ret = -EIO;
+ goto out_release_base;
+ }
+ if (fpga_download(dev->base_addr, yp->bitrate)) {
+ printk(KERN_ERR "%s: cannot init FPGA\n", dev->name);
+ ret = -EIO;
+ goto out_release_base;
+ }
+ outb(0, IER(dev->base_addr));
+ if (request_irq(dev->irq, yam_interrupt, SA_INTERRUPT | SA_SHIRQ, dev->name, dev)) {
+ printk(KERN_ERR "%s: irq %d busy\n", dev->name, dev->irq);
+ ret = -EBUSY;
+ goto out_release_base;
+ }
+
+ yam_set_uart(dev);
+
+ netif_start_queue(dev);
+
+ yp->slotcnt = yp->slot / 10;
+
+ /* Reset overruns for all ports - FPGA programming makes overruns */
+ for (i = 0; i < NR_PORTS; i++) {
+ struct net_device *dev = yam_devs[i];
+ struct yam_port *yp = netdev_priv(dev);
+ inb(LSR(dev->base_addr));
+ yp->stats.rx_fifo_errors = 0;
+ }
+
+ printk(KERN_INFO "%s at iobase 0x%lx irq %u uart %s\n", dev->name, dev->base_addr, dev->irq,
+ uart_str[u]);
+ return 0;
+
+out_release_base:
+ release_region(dev->base_addr, YAM_EXTENT);
+ return ret;
+}
+
+/* --------------------------------------------------------------------- */
+
+static int yam_close(struct net_device *dev)
+{
+ struct sk_buff *skb;
+ struct yam_port *yp = netdev_priv(dev);
+
+ if (!dev)
+ return -EINVAL;
+
+ /*
+ * disable interrupts
+ */
+ outb(0, IER(dev->base_addr));
+ outb(1, MCR(dev->base_addr));
+ /* Remove IRQ handler if last */
+ free_irq(dev->irq,dev);
+ release_region(dev->base_addr, YAM_EXTENT);
+ netif_stop_queue(dev);
+ while ((skb = skb_dequeue(&yp->send_queue)))
+ dev_kfree_skb(skb);
+
+ printk(KERN_INFO "%s: close yam at iobase 0x%lx irq %u\n",
+ yam_drvname, dev->base_addr, dev->irq);
+ return 0;
+}
+
+/* --------------------------------------------------------------------- */
+
+static int yam_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
+{
+ struct yam_port *yp = netdev_priv(dev);
+ struct yamdrv_ioctl_cfg yi;
+ struct yamdrv_ioctl_mcs *ym;
+ int ioctl_cmd;
+
+ if (copy_from_user(&ioctl_cmd, ifr->ifr_data, sizeof(int)))
+ return -EFAULT;
+
+ if (yp->magic != YAM_MAGIC)
+ return -EINVAL;
+
+ if (!capable(CAP_NET_ADMIN))
+ return -EPERM;
+
+ if (cmd != SIOCDEVPRIVATE)
+ return -EINVAL;
+
+ switch (ioctl_cmd) {
+
+ case SIOCYAMRESERVED:
+ return -EINVAL; /* unused */
+
+ case SIOCYAMSMCS:
+ if (netif_running(dev))
+ return -EINVAL; /* Cannot change this parameter when up */
+ if ((ym = kmalloc(sizeof(struct yamdrv_ioctl_mcs), GFP_KERNEL)) == NULL)
+ return -ENOBUFS;
+ ym->bitrate = 9600;
+ if (copy_from_user(ym, ifr->ifr_data, sizeof(struct yamdrv_ioctl_mcs))) {
+ kfree(ym);
+ return -EFAULT;
+ }
+ if (ym->bitrate > YAM_MAXBITRATE) {
+ kfree(ym);
+ return -EINVAL;
+ }
+ add_mcs(ym->bits, ym->bitrate);
+ kfree(ym);
+ break;
+
+ case SIOCYAMSCFG:
+ if (!capable(CAP_SYS_RAWIO))
+ return -EPERM;
+ if (copy_from_user(&yi, ifr->ifr_data, sizeof(struct yamdrv_ioctl_cfg)))
+ return -EFAULT;
+
+ if ((yi.cfg.mask & YAM_IOBASE) && netif_running(dev))
+ return -EINVAL; /* Cannot change this parameter when up */
+ if ((yi.cfg.mask & YAM_IRQ) && netif_running(dev))
+ return -EINVAL; /* Cannot change this parameter when up */
+ if ((yi.cfg.mask & YAM_BITRATE) && netif_running(dev))
+ return -EINVAL; /* Cannot change this parameter when up */
+ if ((yi.cfg.mask & YAM_BAUDRATE) && netif_running(dev))
+ return -EINVAL; /* Cannot change this parameter when up */
+
+ if (yi.cfg.mask & YAM_IOBASE) {
+ yp->iobase = yi.cfg.iobase;
+ dev->base_addr = yi.cfg.iobase;
+ }
+ if (yi.cfg.mask & YAM_IRQ) {
+ if (yi.cfg.irq > 15)
+ return -EINVAL;
+ yp->irq = yi.cfg.irq;
+ dev->irq = yi.cfg.irq;
+ }
+ if (yi.cfg.mask & YAM_BITRATE) {
+ if (yi.cfg.bitrate > YAM_MAXBITRATE)
+ return -EINVAL;
+ yp->bitrate = yi.cfg.bitrate;
+ }
+ if (yi.cfg.mask & YAM_BAUDRATE) {
+ if (yi.cfg.baudrate > YAM_MAXBAUDRATE)
+ return -EINVAL;
+ yp->baudrate = yi.cfg.baudrate;
+ }
+ if (yi.cfg.mask & YAM_MODE) {
+ if (yi.cfg.mode > YAM_MAXMODE)
+ return -EINVAL;
+ yp->dupmode = yi.cfg.mode;
+ }
+ if (yi.cfg.mask & YAM_HOLDDLY) {
+ if (yi.cfg.holddly > YAM_MAXHOLDDLY)
+ return -EINVAL;
+ yp->holdd = yi.cfg.holddly;
+ }
+ if (yi.cfg.mask & YAM_TXDELAY) {
+ if (yi.cfg.txdelay > YAM_MAXTXDELAY)
+ return -EINVAL;
+ yp->txd = yi.cfg.txdelay;
+ }
+ if (yi.cfg.mask & YAM_TXTAIL) {
+ if (yi.cfg.txtail > YAM_MAXTXTAIL)
+ return -EINVAL;
+ yp->txtail = yi.cfg.txtail;
+ }
+ if (yi.cfg.mask & YAM_PERSIST) {
+ if (yi.cfg.persist > YAM_MAXPERSIST)
+ return -EINVAL;
+ yp->pers = yi.cfg.persist;
+ }
+ if (yi.cfg.mask & YAM_SLOTTIME) {
+ if (yi.cfg.slottime > YAM_MAXSLOTTIME)
+ return -EINVAL;
+ yp->slot = yi.cfg.slottime;
+ yp->slotcnt = yp->slot / 10;
+ }
+ break;
+
+ case SIOCYAMGCFG:
+ yi.cfg.mask = 0xffffffff;
+ yi.cfg.iobase = yp->iobase;
+ yi.cfg.irq = yp->irq;
+ yi.cfg.bitrate = yp->bitrate;
+ yi.cfg.baudrate = yp->baudrate;
+ yi.cfg.mode = yp->dupmode;
+ yi.cfg.txdelay = yp->txd;
+ yi.cfg.holddly = yp->holdd;
+ yi.cfg.txtail = yp->txtail;
+ yi.cfg.persist = yp->pers;
+ yi.cfg.slottime = yp->slot;
+ if (copy_to_user(ifr->ifr_data, &yi, sizeof(struct yamdrv_ioctl_cfg)))
+ return -EFAULT;
+ break;
+
+ default:
+ return -EINVAL;
+
+ }
+
+ return 0;
+}
+
+/* --------------------------------------------------------------------- */
+
+static int yam_set_mac_address(struct net_device *dev, void *addr)
+{
+ struct sockaddr *sa = (struct sockaddr *) addr;
+
+ /* addr is an AX.25 shifted ASCII mac address */
+ memcpy(dev->dev_addr, sa->sa_data, dev->addr_len);
+ return 0;
+}
+
+/* --------------------------------------------------------------------- */
+
+static void yam_setup(struct net_device *dev)
+{
+ struct yam_port *yp = netdev_priv(dev);
+
+ yp->magic = YAM_MAGIC;
+ yp->bitrate = DEFAULT_BITRATE;
+ yp->baudrate = DEFAULT_BITRATE * 2;
+ yp->iobase = 0;
+ yp->irq = 0;
+ yp->dupmode = 0;
+ yp->holdd = DEFAULT_HOLDD;
+ yp->txd = DEFAULT_TXD;
+ yp->txtail = DEFAULT_TXTAIL;
+ yp->slot = DEFAULT_SLOT;
+ yp->pers = DEFAULT_PERS;
+ yp->dev = dev;
+
+ dev->base_addr = yp->iobase;
+ dev->irq = yp->irq;
+ SET_MODULE_OWNER(dev);
+
+ dev->open = yam_open;
+ dev->stop = yam_close;
+ dev->do_ioctl = yam_ioctl;
+ dev->hard_start_xmit = yam_send_packet;
+ dev->get_stats = yam_get_stats;
+
+ skb_queue_head_init(&yp->send_queue);
+
+#if defined(CONFIG_AX25) || defined(CONFIG_AX25_MODULE)
+ dev->hard_header = ax25_encapsulate;
+ dev->rebuild_header = ax25_rebuild_header;
+#else /* CONFIG_AX25 || CONFIG_AX25_MODULE */
+ dev->hard_header = NULL;
+ dev->rebuild_header = NULL;
+#endif /* CONFIG_AX25 || CONFIG_AX25_MODULE */
+
+ dev->set_mac_address = yam_set_mac_address;
+
+ dev->type = ARPHRD_AX25; /* AF_AX25 device */
+ dev->hard_header_len = 73; /* We do digipeaters now */
+ dev->mtu = 256; /* AX25 is the default */
+ dev->addr_len = 7; /* sizeof an ax.25 address */
+ memcpy(dev->broadcast, ax25_bcast, 7);
+ memcpy(dev->dev_addr, ax25_test, 7);
+
+}
+
+static int __init yam_init_driver(void)
+{
+ struct net_device *dev;
+ int i, err;
+ char name[IFNAMSIZ];
+
+ printk(yam_drvinfo);
+
+ for (i = 0; i < NR_PORTS; i++) {
+ sprintf(name, "yam%d", i);
+
+ dev = alloc_netdev(sizeof(struct yam_port), name,
+ yam_setup);
+ if (!dev) {
+ printk(KERN_ERR "yam: cannot allocate net device %s\n",
+ dev->name);
+ err = -ENOMEM;
+ goto error;
+ }
+
+ err = register_netdev(dev);
+ if (err) {
+ printk(KERN_WARNING "yam: cannot register net device %s\n", dev->name);
+ goto error;
+ }
+ yam_devs[i] = dev;
+
+ }
+
+ yam_timer.function = yam_dotimer;
+ yam_timer.expires = jiffies + HZ / 100;
+ add_timer(&yam_timer);
+
+ proc_net_fops_create("yam", S_IRUGO, &yam_info_fops);
+ return 0;
+ error:
+ while (--i >= 0) {
+ unregister_netdev(yam_devs[i]);
+ free_netdev(yam_devs[i]);
+ }
+ return err;
+}
+
+/* --------------------------------------------------------------------- */
+
+static void __exit yam_cleanup_driver(void)
+{
+ struct yam_mcs *p;
+ int i;
+
+ del_timer(&yam_timer);
+ for (i = 0; i < NR_PORTS; i++) {
+ struct net_device *dev = yam_devs[i];
+ if (dev) {
+ unregister_netdev(dev);
+ free_netdev(dev);
+ }
+ }
+
+ while (yam_data) {
+ p = yam_data;
+ yam_data = yam_data->next;
+ kfree(p);
+ }
+
+ proc_net_remove("yam");
+}
+
+/* --------------------------------------------------------------------- */
+
+MODULE_AUTHOR("Frederic Rible F1OAT frible@teaser.fr");
+MODULE_DESCRIPTION("Yam amateur radio modem driver");
+MODULE_LICENSE("GPL");
+
+module_init(yam_init_driver);
+module_exit(yam_cleanup_driver);
+
+/* --------------------------------------------------------------------- */
+