diff --git a/drivers/net/macsonic.c b/drivers/net/macsonic.c
new file mode 100644
index 0000000..be28c65
--- /dev/null
+++ b/drivers/net/macsonic.c
@@ -0,0 +1,657 @@
+/*
+ * macsonic.c
+ *
+ * (C) 1998 Alan Cox
+ *
+ * Debugging Andreas Ehliar, Michael Schmitz
+ *
+ * Based on code
+ * (C) 1996 by Thomas Bogendoerfer (tsbogend@bigbug.franken.de)
+ * 
+ * This driver is based on work from Andreas Busse, but most of
+ * the code is rewritten.
+ * 
+ * (C) 1995 by Andreas Busse (andy@waldorf-gmbh.de)
+ *
+ * A driver for the Mac onboard Sonic ethernet chip.
+ *
+ * 98/12/21 MSch: judged from tests on Q800, it's basically working, 
+ *		  but eating up both receive and transmit resources
+ *		  and duplicating packets. Needs more testing.
+ *
+ * 99/01/03 MSch: upgraded to version 0.92 of the core driver, fixed.
+ * 
+ * 00/10/31 sammy@oh.verio.com: Updated driver for 2.4 kernels, fixed problems
+ *          on centris.
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/ctype.h>
+#include <linux/fcntl.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/in.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/delay.h>
+#include <linux/nubus.h>
+#include <linux/errno.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/module.h>
+#include <linux/bitops.h>
+
+#include <asm/bootinfo.h>
+#include <asm/system.h>
+#include <asm/pgtable.h>
+#include <asm/io.h>
+#include <asm/hwtest.h>
+#include <asm/dma.h>
+#include <asm/macintosh.h>
+#include <asm/macints.h>
+#include <asm/mac_via.h>
+
+#define SREGS_PAD(n)    u16 n;
+
+#include "sonic.h"
+
+#define SONIC_READ(reg) \
+	nubus_readl(base_addr+(reg))
+#define SONIC_WRITE(reg,val) \
+	nubus_writel((val), base_addr+(reg))
+#define sonic_read(dev, reg) \
+	nubus_readl((dev)->base_addr+(reg))
+#define sonic_write(dev, reg, val) \
+	nubus_writel((val), (dev)->base_addr+(reg))
+
+
+static int sonic_debug;
+static int sonic_version_printed;
+
+static int reg_offset;
+
+extern int mac_onboard_sonic_probe(struct net_device* dev);
+extern int mac_nubus_sonic_probe(struct net_device* dev);
+
+/* For onboard SONIC */
+#define ONBOARD_SONIC_REGISTERS	0x50F0A000
+#define ONBOARD_SONIC_PROM_BASE	0x50f08000
+
+enum macsonic_type {
+	MACSONIC_DUODOCK,
+	MACSONIC_APPLE,
+	MACSONIC_APPLE16,
+	MACSONIC_DAYNA,
+	MACSONIC_DAYNALINK
+};
+
+/* For the built-in SONIC in the Duo Dock */
+#define DUODOCK_SONIC_REGISTERS 0xe10000
+#define DUODOCK_SONIC_PROM_BASE 0xe12000
+
+/* For Apple-style NuBus SONIC */
+#define APPLE_SONIC_REGISTERS	0
+#define APPLE_SONIC_PROM_BASE	0x40000
+
+/* Daynalink LC SONIC */
+#define DAYNALINK_PROM_BASE 0x400000
+
+/* For Dayna-style NuBus SONIC (haven't seen one yet) */
+#define DAYNA_SONIC_REGISTERS   0x180000
+/* This is what OpenBSD says.  However, this is definitely in NuBus
+   ROM space so we should be able to get it by walking the NuBus
+   resource directories */
+#define DAYNA_SONIC_MAC_ADDR	0xffe004
+
+#define SONIC_READ_PROM(addr) nubus_readb(prom_addr+addr)
+
+struct net_device * __init macsonic_probe(int unit)
+{
+	struct net_device *dev = alloc_etherdev(0);
+	int err;
+
+	if (!dev)
+		return ERR_PTR(-ENOMEM);
+
+	if (unit >= 0)
+		sprintf(dev->name, "eth%d", unit);
+
+ 	SET_MODULE_OWNER(dev);
+
+	/* This will catch fatal stuff like -ENOMEM as well as success */
+	err = mac_onboard_sonic_probe(dev);
+	if (err == 0)
+		goto found;
+	if (err != -ENODEV)
+		goto out;
+	err = mac_nubus_sonic_probe(dev);
+	if (err)
+		goto out;
+found:
+	err = register_netdev(dev);
+	if (err)
+		goto out1;
+	return dev;
+out1:
+	kfree(dev->priv);
+out:
+	free_netdev(dev);
+	return ERR_PTR(err);
+}
+
+/*
+ * For reversing the PROM address
+ */
+
+static unsigned char nibbletab[] = {0, 8, 4, 12, 2, 10, 6, 14,
+				    1, 9, 5, 13, 3, 11, 7, 15};
+
+static inline void bit_reverse_addr(unsigned char addr[6])
+{
+	int i;
+
+	for(i = 0; i < 6; i++)
+		addr[i] = ((nibbletab[addr[i] & 0xf] << 4) | 
+			   nibbletab[(addr[i] >> 4) &0xf]);
+}
+
+int __init macsonic_init(struct net_device* dev)
+{
+	struct sonic_local* lp = NULL;
+	int i;
+
+	/* Allocate the entire chunk of memory for the descriptors.
+           Note that this cannot cross a 64K boundary. */
+	for (i = 0; i < 20; i++) {
+		unsigned long desc_base, desc_top;
+		if((lp = kmalloc(sizeof(struct sonic_local), GFP_KERNEL | GFP_DMA)) == NULL) {
+			printk(KERN_ERR "%s: couldn't allocate descriptor buffers\n", dev->name);
+			return -ENOMEM;
+		}
+
+		desc_base = (unsigned long) lp;
+		desc_top = desc_base + sizeof(struct sonic_local);
+		if ((desc_top & 0xffff) >= (desc_base & 0xffff))
+			break;
+		/* Hmm. try again (FIXME: does this actually work?) */
+		kfree(lp);
+		printk(KERN_DEBUG
+		       "%s: didn't get continguous chunk [%08lx - %08lx], trying again\n",
+		       dev->name, desc_base, desc_top);
+	}
+
+	if (lp == NULL) {
+		printk(KERN_ERR "%s: tried 20 times to allocate descriptor buffers, giving up.\n",
+		       dev->name);
+		return -ENOMEM;
+	}		       
+
+	dev->priv = lp;
+
+#if 0
+	/* this code is only here as a curiousity...   mainly, where the 
+	   fuck did SONIC_BUS_SCALE come from, and what was it supposed
+	   to do?  the normal allocation works great for 32 bit stuffs..  */
+
+	/* Now set up the pointers to point to the appropriate places */
+	lp->cda = lp->sonic_desc;
+	lp->tda = lp->cda + (SIZEOF_SONIC_CDA * SONIC_BUS_SCALE(lp->dma_bitmode));
+	lp->rda = lp->tda + (SIZEOF_SONIC_TD * SONIC_NUM_TDS
+			     * SONIC_BUS_SCALE(lp->dma_bitmode));
+	lp->rra = lp->rda + (SIZEOF_SONIC_RD * SONIC_NUM_RDS
+			     * SONIC_BUS_SCALE(lp->dma_bitmode));
+
+#endif
+	
+	memset(lp, 0, sizeof(struct sonic_local));
+
+	lp->cda_laddr = (unsigned int)&(lp->cda);
+	lp->tda_laddr = (unsigned int)lp->tda;
+	lp->rra_laddr = (unsigned int)lp->rra;
+	lp->rda_laddr = (unsigned int)lp->rda;
+
+	/* FIXME, maybe we should use skbs */
+	if ((lp->rba = (char *)
+	     kmalloc(SONIC_NUM_RRS * SONIC_RBSIZE, GFP_KERNEL | GFP_DMA)) == NULL) {
+		printk(KERN_ERR "%s: couldn't allocate receive buffers\n", dev->name);
+		dev->priv = NULL;
+		kfree(lp);
+		return -ENOMEM;
+	}
+
+	lp->rba_laddr = (unsigned int)lp->rba;
+
+	{
+		int rs, ds;
+
+		/* almost always 12*4096, but let's not take chances */
+		rs = ((SONIC_NUM_RRS * SONIC_RBSIZE + 4095) / 4096) * 4096;
+		/* almost always under a page, but let's not take chances */
+		ds = ((sizeof(struct sonic_local) + 4095) / 4096) * 4096;
+		kernel_set_cachemode(lp->rba, rs, IOMAP_NOCACHE_SER);
+		kernel_set_cachemode(lp, ds, IOMAP_NOCACHE_SER);
+	}
+	
+#if 0
+	flush_cache_all();
+#endif
+
+	dev->open = sonic_open;
+	dev->stop = sonic_close;
+	dev->hard_start_xmit = sonic_send_packet;
+	dev->get_stats = sonic_get_stats;
+	dev->set_multicast_list = &sonic_multicast_list;
+
+	/*
+	 * clear tally counter
+	 */
+	sonic_write(dev, SONIC_CRCT, 0xffff);
+	sonic_write(dev, SONIC_FAET, 0xffff);
+	sonic_write(dev, SONIC_MPT, 0xffff);
+
+	return 0;
+}
+
+int __init mac_onboard_sonic_ethernet_addr(struct net_device* dev)
+{
+	const int prom_addr = ONBOARD_SONIC_PROM_BASE;
+	int i;
+
+	/* On NuBus boards we can sometimes look in the ROM resources.
+	   No such luck for comm-slot/onboard. */
+	for(i = 0; i < 6; i++)
+		dev->dev_addr[i] = SONIC_READ_PROM(i);
+
+	/* Most of the time, the address is bit-reversed.  The NetBSD
+	   source has a rather long and detailed historical account of
+	   why this is so. */
+	if (memcmp(dev->dev_addr, "\x08\x00\x07", 3) &&
+	    memcmp(dev->dev_addr, "\x00\xA0\x40", 3) &&
+	    memcmp(dev->dev_addr, "\x00\x05\x02", 3))
+		bit_reverse_addr(dev->dev_addr);
+	else
+		return 0;
+
+	/* If we still have what seems to be a bogus address, we'll
+           look in the CAM.  The top entry should be ours. */
+	/* Danger! This only works if MacOS has already initialized
+           the card... */
+	if (memcmp(dev->dev_addr, "\x08\x00\x07", 3) &&
+	    memcmp(dev->dev_addr, "\x00\xA0\x40", 3) &&
+	    memcmp(dev->dev_addr, "\x00\x05\x02", 3))
+	{
+		unsigned short val;
+
+		printk(KERN_INFO "macsonic: PROM seems to be wrong, trying CAM entry 15\n");
+		
+		sonic_write(dev, SONIC_CMD, SONIC_CR_RST);
+		sonic_write(dev, SONIC_CEP, 15);
+
+		val = sonic_read(dev, SONIC_CAP2);
+		dev->dev_addr[5] = val >> 8;
+		dev->dev_addr[4] = val & 0xff;
+		val = sonic_read(dev, SONIC_CAP1);
+		dev->dev_addr[3] = val >> 8;
+		dev->dev_addr[2] = val & 0xff;
+		val = sonic_read(dev, SONIC_CAP0);
+		dev->dev_addr[1] = val >> 8;
+		dev->dev_addr[0] = val & 0xff;
+		
+		printk(KERN_INFO "HW Address from CAM 15: ");
+		for (i = 0; i < 6; i++) {
+			printk("%2.2x", dev->dev_addr[i]);
+			if (i < 5)
+				printk(":");
+		}
+		printk("\n");
+	} else return 0;
+
+	if (memcmp(dev->dev_addr, "\x08\x00\x07", 3) &&
+	    memcmp(dev->dev_addr, "\x00\xA0\x40", 3) &&
+	    memcmp(dev->dev_addr, "\x00\x05\x02", 3))
+	{
+		/*
+		 * Still nonsense ... messed up someplace!
+		 */
+		printk(KERN_ERR "macsonic: ERROR (INVALID MAC)\n");
+		return -EIO;
+	} else return 0;
+}
+
+int __init mac_onboard_sonic_probe(struct net_device* dev)
+{
+	/* Bwahahaha */
+	static int once_is_more_than_enough;
+	int i;
+	int dma_bitmode;
+	
+	if (once_is_more_than_enough)
+		return -ENODEV;
+	once_is_more_than_enough = 1;
+
+	if (!MACH_IS_MAC)
+		return -ENODEV;
+
+	printk(KERN_INFO "Checking for internal Macintosh ethernet (SONIC).. ");
+
+	if (macintosh_config->ether_type != MAC_ETHER_SONIC)
+	{
+		printk("none.\n");
+		return -ENODEV;
+	}
+
+	/* Bogus probing, on the models which may or may not have
+	   Ethernet (BTW, the Ethernet *is* always at the same
+	   address, and nothing else lives there, at least if Apple's
+	   documentation is to be believed) */
+	if (macintosh_config->ident == MAC_MODEL_Q630 ||
+	    macintosh_config->ident == MAC_MODEL_P588 ||
+	    macintosh_config->ident == MAC_MODEL_C610) {
+		unsigned long flags;
+		int card_present;
+
+		local_irq_save(flags);
+		card_present = hwreg_present((void*)ONBOARD_SONIC_REGISTERS);
+		local_irq_restore(flags);
+
+		if (!card_present) {
+			printk("none.\n");
+			return -ENODEV;
+		}
+	}
+
+	printk("yes\n");	
+
+	/* Danger!  My arms are flailing wildly!  You *must* set this
+           before using sonic_read() */
+
+	dev->base_addr = ONBOARD_SONIC_REGISTERS;
+	if (via_alt_mapping)
+		dev->irq = IRQ_AUTO_3;
+	else
+		dev->irq = IRQ_NUBUS_9;
+
+	if (!sonic_version_printed) {
+		printk(KERN_INFO "%s", version);
+		sonic_version_printed = 1;
+	}
+	printk(KERN_INFO "%s: onboard / comm-slot SONIC at 0x%08lx\n",
+	       dev->name, dev->base_addr);
+
+	/* Now do a song and dance routine in an attempt to determine
+           the bus width */
+
+	/* The PowerBook's SONIC is 16 bit always. */
+	if (macintosh_config->ident == MAC_MODEL_PB520) {
+		reg_offset = 0;
+		dma_bitmode = 0;
+	} else if (macintosh_config->ident == MAC_MODEL_C610) {
+		reg_offset = 0;
+		dma_bitmode = 1;
+	} else {
+		/* Some of the comm-slot cards are 16 bit.  But some
+                   of them are not.  The 32-bit cards use offset 2 and
+                   pad with zeroes or sometimes ones (I think...)
+                   Therefore, if we try offset 0 and get a silicon
+                   revision of 0, we assume 16 bit. */
+		int sr;
+
+		/* Technically this is not necessary since we zeroed
+                   it above */
+		reg_offset = 0;
+		dma_bitmode = 0;
+		sr = sonic_read(dev, SONIC_SR);
+		if (sr == 0 || sr == 0xffff) {
+			reg_offset = 2;
+			/* 83932 is 0x0004, 83934 is 0x0100 or 0x0101 */
+			sr = sonic_read(dev, SONIC_SR);
+			dma_bitmode = 1;
+			
+		}
+		printk(KERN_INFO
+		       "%s: revision 0x%04x, using %d bit DMA and register offset %d\n",
+		       dev->name, sr, dma_bitmode?32:16, reg_offset);
+	}
+	
+
+	/* this carries my sincere apologies -- by the time I got to updating
+	   the driver, support for "reg_offsets" appeares nowhere in the sonic
+	   code, going back for over a year.  Fortunately, my Mac does't seem
+	   to use whatever this was.
+
+	   If you know how this is supposed to be implemented, either fix it,
+	   or contact me (sammy@oh.verio.com) to explain what it is. --Sam */
+	   
+	if(reg_offset) {
+		printk("%s: register offset unsupported.  please fix this if you know what it is.\n", dev->name);
+		return -ENODEV;
+	}
+	
+	/* Software reset, then initialize control registers. */
+	sonic_write(dev, SONIC_CMD, SONIC_CR_RST);
+	sonic_write(dev, SONIC_DCR, SONIC_DCR_BMS |
+		    SONIC_DCR_RFT1 | SONIC_DCR_TFT0 | SONIC_DCR_EXBUS |
+		    (dma_bitmode ? SONIC_DCR_DW : 0));
+
+	/* This *must* be written back to in order to restore the
+           extended programmable output bits */
+	sonic_write(dev, SONIC_DCR2, 0);
+
+	/* Clear *and* disable interrupts to be on the safe side */
+	sonic_write(dev, SONIC_ISR,0x7fff);
+	sonic_write(dev, SONIC_IMR,0);
+
+	/* Now look for the MAC address. */
+	if (mac_onboard_sonic_ethernet_addr(dev) != 0)
+		return -ENODEV;
+
+	printk(KERN_INFO "MAC ");
+	for (i = 0; i < 6; i++) {
+		printk("%2.2x", dev->dev_addr[i]);
+		if (i < 5)
+			printk(":");
+	}
+
+	printk(" IRQ %d\n", dev->irq);
+
+	/* Shared init code */
+	return macsonic_init(dev);
+}
+
+int __init mac_nubus_sonic_ethernet_addr(struct net_device* dev,
+					 unsigned long prom_addr,
+					 int id)
+{
+	int i;
+	for(i = 0; i < 6; i++)
+		dev->dev_addr[i] = SONIC_READ_PROM(i);
+	/* For now we are going to assume that they're all bit-reversed */
+	bit_reverse_addr(dev->dev_addr);
+
+	return 0;
+}
+
+int __init macsonic_ident(struct nubus_dev* ndev)
+{
+	if (ndev->dr_hw == NUBUS_DRHW_ASANTE_LC && 
+	    ndev->dr_sw == NUBUS_DRSW_SONIC_LC)
+		return MACSONIC_DAYNALINK;
+	if (ndev->dr_hw == NUBUS_DRHW_SONIC &&
+	    ndev->dr_sw == NUBUS_DRSW_APPLE) {
+		/* There has to be a better way to do this... */
+		if (strstr(ndev->board->name, "DuoDock"))
+			return MACSONIC_DUODOCK;
+		else
+			return MACSONIC_APPLE;
+	}
+	return -1;
+}
+
+int __init mac_nubus_sonic_probe(struct net_device* dev)
+{
+	static int slots;
+	struct nubus_dev* ndev = NULL;
+	unsigned long base_addr, prom_addr;
+	u16 sonic_dcr;
+	int id;
+	int i;
+	int dma_bitmode;
+
+	/* Find the first SONIC that hasn't been initialized already */
+	while ((ndev = nubus_find_type(NUBUS_CAT_NETWORK,
+				       NUBUS_TYPE_ETHERNET, ndev)) != NULL)
+	{
+		/* Have we seen it already? */
+		if (slots & (1<<ndev->board->slot))
+			continue;
+		slots |= 1<<ndev->board->slot;
+
+		/* Is it one of ours? */
+		if ((id = macsonic_ident(ndev)) != -1)
+			break;
+	}
+
+	if (ndev == NULL)
+		return -ENODEV;
+
+	switch (id) {
+	case MACSONIC_DUODOCK:
+		base_addr = ndev->board->slot_addr + DUODOCK_SONIC_REGISTERS;
+		prom_addr = ndev->board->slot_addr + DUODOCK_SONIC_PROM_BASE;
+		sonic_dcr = SONIC_DCR_EXBUS | SONIC_DCR_RFT0 | SONIC_DCR_RFT1
+			| SONIC_DCR_TFT0;
+		reg_offset = 2;
+		dma_bitmode = 1;
+		break;
+	case MACSONIC_APPLE:
+		base_addr = ndev->board->slot_addr + APPLE_SONIC_REGISTERS;
+		prom_addr = ndev->board->slot_addr + APPLE_SONIC_PROM_BASE;
+		sonic_dcr = SONIC_DCR_BMS | SONIC_DCR_RFT1 | SONIC_DCR_TFT0;
+		reg_offset = 0;
+		dma_bitmode = 1;
+		break;
+	case MACSONIC_APPLE16:
+		base_addr = ndev->board->slot_addr + APPLE_SONIC_REGISTERS;
+		prom_addr = ndev->board->slot_addr + APPLE_SONIC_PROM_BASE;
+		sonic_dcr = SONIC_DCR_EXBUS
+ 			| SONIC_DCR_RFT1 | SONIC_DCR_TFT0
+			| SONIC_DCR_PO1 | SONIC_DCR_BMS; 
+		reg_offset = 0;
+		dma_bitmode = 0;
+		break;
+	case MACSONIC_DAYNALINK:
+		base_addr = ndev->board->slot_addr + APPLE_SONIC_REGISTERS;
+		prom_addr = ndev->board->slot_addr + DAYNALINK_PROM_BASE;
+		sonic_dcr = SONIC_DCR_RFT1 | SONIC_DCR_TFT0
+			| SONIC_DCR_PO1 | SONIC_DCR_BMS; 
+		reg_offset = 0;
+		dma_bitmode = 0;
+		break;
+	case MACSONIC_DAYNA:
+		base_addr = ndev->board->slot_addr + DAYNA_SONIC_REGISTERS;
+		prom_addr = ndev->board->slot_addr + DAYNA_SONIC_MAC_ADDR;
+		sonic_dcr = SONIC_DCR_BMS
+			| SONIC_DCR_RFT1 | SONIC_DCR_TFT0 | SONIC_DCR_PO1;
+		reg_offset = 0;
+		dma_bitmode = 0;
+		break;
+	default:
+		printk(KERN_ERR "macsonic: WTF, id is %d\n", id);
+		return -ENODEV;
+	}
+
+	/* Danger!  My arms are flailing wildly!  You *must* set this
+           before using sonic_read() */
+	dev->base_addr = base_addr;
+	dev->irq = SLOT2IRQ(ndev->board->slot);
+
+	if (!sonic_version_printed) {
+		printk(KERN_INFO "%s", version);
+		sonic_version_printed = 1;
+	}
+	printk(KERN_INFO "%s: %s in slot %X\n",
+	       dev->name, ndev->board->name, ndev->board->slot);
+	printk(KERN_INFO "%s: revision 0x%04x, using %d bit DMA and register offset %d\n",
+	       dev->name, sonic_read(dev, SONIC_SR), dma_bitmode?32:16, reg_offset);
+
+	if(reg_offset) {
+		printk("%s: register offset unsupported.  please fix this if you know what it is.\n", dev->name);
+		return -ENODEV;
+	}
+
+	/* Software reset, then initialize control registers. */
+	sonic_write(dev, SONIC_CMD, SONIC_CR_RST);
+	sonic_write(dev, SONIC_DCR, sonic_dcr
+		    | (dma_bitmode ? SONIC_DCR_DW : 0));
+
+	/* Clear *and* disable interrupts to be on the safe side */
+	sonic_write(dev, SONIC_ISR,0x7fff);
+	sonic_write(dev, SONIC_IMR,0);
+
+	/* Now look for the MAC address. */
+	if (mac_nubus_sonic_ethernet_addr(dev, prom_addr, id) != 0)
+		return -ENODEV;
+
+	printk(KERN_INFO "MAC ");
+	for (i = 0; i < 6; i++) {
+		printk("%2.2x", dev->dev_addr[i]);
+		if (i < 5)
+			printk(":");
+	}
+	printk(" IRQ %d\n", dev->irq);
+
+	/* Shared init code */
+	return macsonic_init(dev);
+}
+
+#ifdef MODULE
+static struct net_device *dev_macsonic;
+
+MODULE_PARM(sonic_debug, "i");
+MODULE_PARM_DESC(sonic_debug, "macsonic debug level (1-4)");
+
+int
+init_module(void)
+{
+        dev_macsonic = macsonic_probe(-1);
+	if (IS_ERR(dev_macsonic)) {
+                printk(KERN_WARNING "macsonic.c: No card found\n");
+		return PTR_ERR(dev_macsonic);
+	}
+	return 0;
+}
+
+void
+cleanup_module(void)
+{
+	unregister_netdev(dev_macsonic);
+	kfree(dev_macsonic->priv);
+	free_netdev(dev_macsonic);
+}
+#endif /* MODULE */
+
+
+#define vdma_alloc(foo, bar) ((u32)foo)
+#define vdma_free(baz)
+#define sonic_chiptomem(bat) (bat)
+#define PHYSADDR(quux) (quux)
+#define CPHYSADDR(quux) (quux)
+
+#define sonic_request_irq       request_irq
+#define sonic_free_irq          free_irq
+
+#include "sonic.c"
+
+/*
+ * Local variables:
+ *  compile-command: "m68k-linux-gcc -D__KERNEL__ -I../../include -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer -pipe -fno-strength-reduce -ffixed-a2 -DMODULE -DMODVERSIONS -include ../../include/linux/modversions.h   -c -o macsonic.o macsonic.c"
+ *  version-control: t
+ *  kept-new-versions: 5
+ *  c-indent-level: 8
+ *  tab-width: 8
+ * End:
+ *
+ */