Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/drivers/net/pcmcia/Kconfig b/drivers/net/pcmcia/Kconfig
new file mode 100644
index 0000000..74f8620
--- /dev/null
+++ b/drivers/net/pcmcia/Kconfig
@@ -0,0 +1,132 @@
+#
+# PCMCIA Network device configuration
+#
+
+menu "PCMCIA network device support"
+ depends on NETDEVICES && PCMCIA!=n
+
+config NET_PCMCIA
+ bool "PCMCIA network device support"
+ ---help---
+ Say Y if you would like to include support for any PCMCIA or CardBus
+ network adapters, then say Y to the driver for your particular card
+ below. PCMCIA- or PC-cards are credit-card size devices often used
+ with laptops computers; CardBus is the newer and faster version of
+ PCMCIA.
+
+ To use your PC-cards, you will need supporting software from David
+ Hinds' pcmcia-cs package (see the file <file:Documentation/Changes>
+ for location). You also want to check out the PCMCIA-HOWTO,
+ available from <http://www.tldp.org/docs.html#howto>.
+
+ If unsure, say N.
+
+config PCMCIA_3C589
+ tristate "3Com 3c589 PCMCIA support"
+ depends on NET_PCMCIA && PCMCIA
+ help
+ Say Y here if you intend to attach a 3Com 3c589 or compatible PCMCIA
+ (PC-card) Ethernet card to your computer.
+
+ To compile this driver as a module, choose M here: the module will be
+ called 3c589_cs. If unsure, say N.
+
+config PCMCIA_3C574
+ tristate "3Com 3c574 PCMCIA support"
+ depends on NET_PCMCIA && PCMCIA
+ help
+ Say Y here if you intend to attach a 3Com 3c574 or compatible PCMCIA
+ (PC-card) Fast Ethernet card to your computer.
+
+ To compile this driver as a module, choose M here: the module will be
+ called 3c574_cs. If unsure, say N.
+
+config PCMCIA_FMVJ18X
+ tristate "Fujitsu FMV-J18x PCMCIA support"
+ depends on NET_PCMCIA && PCMCIA
+ select CRC32
+ help
+ Say Y here if you intend to attach a Fujitsu FMV-J18x or compatible
+ PCMCIA (PC-card) Ethernet card to your computer.
+
+ To compile this driver as a module, choose M here: the module will be
+ called fmvj18x_cs. If unsure, say N.
+
+config PCMCIA_PCNET
+ tristate "NE2000 compatible PCMCIA support"
+ depends on NET_PCMCIA && PCMCIA
+ select CRC32
+ help
+ Say Y here if you intend to attach an NE2000 compatible PCMCIA
+ (PC-card) Ethernet or Fast Ethernet card to your computer.
+
+ To compile this driver as a module, choose M here: the module will be
+ called pcnet_cs. If unsure, say N.
+
+config PCMCIA_NMCLAN
+ tristate "New Media PCMCIA support"
+ depends on NET_PCMCIA && PCMCIA
+ help
+ Say Y here if you intend to attach a New Media Ethernet or LiveWire
+ PCMCIA (PC-card) Ethernet card to your computer.
+
+ To compile this driver as a module, choose M here: the module will be
+ called nmclan_cs. If unsure, say N.
+
+config PCMCIA_SMC91C92
+ tristate "SMC 91Cxx PCMCIA support"
+ depends on NET_PCMCIA && PCMCIA
+ select CRC32
+ select MII
+ help
+ Say Y here if you intend to attach an SMC 91Cxx compatible PCMCIA
+ (PC-card) Ethernet or Fast Ethernet card to your computer.
+
+ To compile this driver as a module, choose M here: the module will be
+ called smc91c92_cs. If unsure, say N.
+
+config PCMCIA_XIRC2PS
+ tristate "Xircom 16-bit PCMCIA support"
+ depends on NET_PCMCIA && PCMCIA
+ help
+ Say Y here if you intend to attach a Xircom 16-bit PCMCIA (PC-card)
+ Ethernet or Fast Ethernet card to your computer.
+
+ To compile this driver as a module, choose M here: the module will be
+ called xirc2ps_cs. If unsure, say N.
+
+config PCMCIA_AXNET
+ tristate "Asix AX88190 PCMCIA support"
+ depends on NET_PCMCIA && PCMCIA
+ ---help---
+ Say Y here if you intend to attach an Asix AX88190-based PCMCIA
+ (PC-card) Fast Ethernet card to your computer. These cards are
+ nearly NE2000 compatible but need a separate driver due to a few
+ misfeatures.
+
+ To compile this driver as a module, choose M here: the module will be
+ called axnet_cs. If unsure, say N.
+
+config ARCNET_COM20020_CS
+ tristate "COM20020 ARCnet PCMCIA support"
+ depends on NET_PCMCIA && ARCNET_COM20020 && PCMCIA
+ help
+ Say Y here if you intend to attach this type of ARCnet PCMCIA card
+ to your computer.
+
+ To compile this driver as a module, choose M here: the module will be
+ called com20020_cs. If unsure, say N.
+
+config PCMCIA_IBMTR
+ tristate "IBM PCMCIA tokenring adapter support"
+ depends on NET_PCMCIA && IBMTR!=y && TR && PCMCIA && !64BIT
+ help
+ Say Y here if you intend to attach this type of Token Ring PCMCIA
+ card to your computer. You then also need to say Y to "Token Ring
+ driver support".
+
+ To compile this driver as a module, choose M here: the module will be
+ called ibmtr_cs.
+
+endmenu
+