Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/drivers/net/sun3lance.c b/drivers/net/sun3lance.c
new file mode 100644
index 0000000..1f43bbf
--- /dev/null
+++ b/drivers/net/sun3lance.c
@@ -0,0 +1,965 @@
+/* sun3lance.c: Ethernet driver for SUN3 Lance chip */
+/*
+
+ Sun3 Lance ethernet driver, by Sam Creasey (sammy@users.qual.net).
+ This driver is a part of the linux kernel, and is thus distributed
+ under the GNU General Public License.
+
+ The values used in LANCE_OBIO and LANCE_IRQ seem to be empirically
+ true for the correct IRQ and address of the lance registers. They
+ have not been widely tested, however. What we probably need is a
+ "proper" way to search for a device in the sun3's prom, but, alas,
+ linux has no such thing.
+
+ This driver is largely based on atarilance.c, by Roman Hodek. Other
+ sources of inspiration were the NetBSD sun3 am7990 driver, and the
+ linux sparc lance driver (sunlance.c).
+
+ There are more assumptions made throughout this driver, it almost
+ certainly still needs work, but it does work at least for RARP/BOOTP and
+ mounting the root NFS filesystem.
+
+*/
+
+static char *version = "sun3lance.c: v1.2 1/12/2001 Sam Creasey (sammy@sammy.net)\n";
+
+#include <linux/module.h>
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/bitops.h>
+
+#include <asm/setup.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <asm/pgtable.h>
+#include <asm/dvma.h>
+#include <asm/idprom.h>
+#include <asm/machines.h>
+
+#ifdef CONFIG_SUN3
+#include <asm/sun3mmu.h>
+#else
+#include <asm/sun3xprom.h>
+#endif
+
+/* sun3/60 addr/irq for the lance chip. If your sun is different,
+ change this. */
+#define LANCE_OBIO 0x120000
+#define LANCE_IRQ IRQ3
+
+/* Debug level:
+ * 0 = silent, print only serious errors
+ * 1 = normal, print error messages
+ * 2 = debug, print debug infos
+ * 3 = debug, print even more debug infos (packet data)
+ */
+
+#define LANCE_DEBUG 0
+
+#ifdef LANCE_DEBUG
+static int lance_debug = LANCE_DEBUG;
+#else
+static int lance_debug = 1;
+#endif
+MODULE_PARM(lance_debug, "i");
+MODULE_PARM_DESC(lance_debug, "SUN3 Lance debug level (0-3)");
+MODULE_LICENSE("GPL");
+
+#define DPRINTK(n,a) \
+ do { \
+ if (lance_debug >= n) \
+ printk a; \
+ } while( 0 )
+
+
+/* we're only using 32k of memory, so we use 4 TX
+ buffers and 16 RX buffers. These values are expressed as log2. */
+
+#define TX_LOG_RING_SIZE 3
+#define RX_LOG_RING_SIZE 5
+
+/* These are the derived values */
+
+#define TX_RING_SIZE (1 << TX_LOG_RING_SIZE)
+#define TX_RING_LEN_BITS (TX_LOG_RING_SIZE << 5)
+#define TX_RING_MOD_MASK (TX_RING_SIZE - 1)
+
+#define RX_RING_SIZE (1 << RX_LOG_RING_SIZE)
+#define RX_RING_LEN_BITS (RX_LOG_RING_SIZE << 5)
+#define RX_RING_MOD_MASK (RX_RING_SIZE - 1)
+
+/* Definitions for packet buffer access: */
+#define PKT_BUF_SZ 1544
+
+/* Get the address of a packet buffer corresponding to a given buffer head */
+#define PKTBUF_ADDR(head) (void *)((unsigned long)(MEM) | (head)->base)
+
+
+/* The LANCE Rx and Tx ring descriptors. */
+struct lance_rx_head {
+ unsigned short base; /* Low word of base addr */
+ volatile unsigned char flag;
+ unsigned char base_hi; /* High word of base addr (unused) */
+ short buf_length; /* This length is 2s complement! */
+ volatile short msg_length; /* This length is "normal". */
+};
+
+struct lance_tx_head {
+ unsigned short base; /* Low word of base addr */
+ volatile unsigned char flag;
+ unsigned char base_hi; /* High word of base addr (unused) */
+ short length; /* Length is 2s complement! */
+ volatile short misc;
+};
+
+/* The LANCE initialization block, described in databook. */
+struct lance_init_block {
+ unsigned short mode; /* Pre-set mode */
+ unsigned char hwaddr[6]; /* Physical ethernet address */
+ unsigned int filter[2]; /* Multicast filter (unused). */
+ /* Receive and transmit ring base, along with length bits. */
+ unsigned short rdra;
+ unsigned short rlen;
+ unsigned short tdra;
+ unsigned short tlen;
+ unsigned short pad[4]; /* is thie needed? */
+};
+
+/* The whole layout of the Lance shared memory */
+struct lance_memory {
+ struct lance_init_block init;
+ struct lance_tx_head tx_head[TX_RING_SIZE];
+ struct lance_rx_head rx_head[RX_RING_SIZE];
+ char rx_data[RX_RING_SIZE][PKT_BUF_SZ];
+ char tx_data[TX_RING_SIZE][PKT_BUF_SZ];
+};
+
+/* The driver's private device structure */
+
+struct lance_private {
+ volatile unsigned short *iobase;
+ struct lance_memory *mem;
+ int new_rx, new_tx; /* The next free ring entry */
+ int old_tx, old_rx; /* ring entry to be processed */
+ struct net_device_stats stats;
+/* These two must be longs for set_bit() */
+ long tx_full;
+ long lock;
+};
+
+/* I/O register access macros */
+
+#define MEM lp->mem
+#define DREG lp->iobase[0]
+#define AREG lp->iobase[1]
+#define REGA(a) ( AREG = (a), DREG )
+
+/* Definitions for the Lance */
+
+/* tx_head flags */
+#define TMD1_ENP 0x01 /* end of packet */
+#define TMD1_STP 0x02 /* start of packet */
+#define TMD1_DEF 0x04 /* deferred */
+#define TMD1_ONE 0x08 /* one retry needed */
+#define TMD1_MORE 0x10 /* more than one retry needed */
+#define TMD1_ERR 0x40 /* error summary */
+#define TMD1_OWN 0x80 /* ownership (set: chip owns) */
+
+#define TMD1_OWN_CHIP TMD1_OWN
+#define TMD1_OWN_HOST 0
+
+/* tx_head misc field */
+#define TMD3_TDR 0x03FF /* Time Domain Reflectometry counter */
+#define TMD3_RTRY 0x0400 /* failed after 16 retries */
+#define TMD3_LCAR 0x0800 /* carrier lost */
+#define TMD3_LCOL 0x1000 /* late collision */
+#define TMD3_UFLO 0x4000 /* underflow (late memory) */
+#define TMD3_BUFF 0x8000 /* buffering error (no ENP) */
+
+/* rx_head flags */
+#define RMD1_ENP 0x01 /* end of packet */
+#define RMD1_STP 0x02 /* start of packet */
+#define RMD1_BUFF 0x04 /* buffer error */
+#define RMD1_CRC 0x08 /* CRC error */
+#define RMD1_OFLO 0x10 /* overflow */
+#define RMD1_FRAM 0x20 /* framing error */
+#define RMD1_ERR 0x40 /* error summary */
+#define RMD1_OWN 0x80 /* ownership (set: ship owns) */
+
+#define RMD1_OWN_CHIP RMD1_OWN
+#define RMD1_OWN_HOST 0
+
+/* register names */
+#define CSR0 0 /* mode/status */
+#define CSR1 1 /* init block addr (low) */
+#define CSR2 2 /* init block addr (high) */
+#define CSR3 3 /* misc */
+#define CSR8 8 /* address filter */
+#define CSR15 15 /* promiscuous mode */
+
+/* CSR0 */
+/* (R=readable, W=writeable, S=set on write, C=clear on write) */
+#define CSR0_INIT 0x0001 /* initialize (RS) */
+#define CSR0_STRT 0x0002 /* start (RS) */
+#define CSR0_STOP 0x0004 /* stop (RS) */
+#define CSR0_TDMD 0x0008 /* transmit demand (RS) */
+#define CSR0_TXON 0x0010 /* transmitter on (R) */
+#define CSR0_RXON 0x0020 /* receiver on (R) */
+#define CSR0_INEA 0x0040 /* interrupt enable (RW) */
+#define CSR0_INTR 0x0080 /* interrupt active (R) */
+#define CSR0_IDON 0x0100 /* initialization done (RC) */
+#define CSR0_TINT 0x0200 /* transmitter interrupt (RC) */
+#define CSR0_RINT 0x0400 /* receiver interrupt (RC) */
+#define CSR0_MERR 0x0800 /* memory error (RC) */
+#define CSR0_MISS 0x1000 /* missed frame (RC) */
+#define CSR0_CERR 0x2000 /* carrier error (no heartbeat :-) (RC) */
+#define CSR0_BABL 0x4000 /* babble: tx-ed too many bits (RC) */
+#define CSR0_ERR 0x8000 /* error (RC) */
+
+/* CSR3 */
+#define CSR3_BCON 0x0001 /* byte control */
+#define CSR3_ACON 0x0002 /* ALE control */
+#define CSR3_BSWP 0x0004 /* byte swap (1=big endian) */
+
+/***************************** Prototypes *****************************/
+
+static int lance_probe( struct net_device *dev);
+static int lance_open( struct net_device *dev );
+static void lance_init_ring( struct net_device *dev );
+static int lance_start_xmit( struct sk_buff *skb, struct net_device *dev );
+static irqreturn_t lance_interrupt( int irq, void *dev_id, struct pt_regs *fp );
+static int lance_rx( struct net_device *dev );
+static int lance_close( struct net_device *dev );
+static struct net_device_stats *lance_get_stats( struct net_device *dev );
+static void set_multicast_list( struct net_device *dev );
+
+/************************* End of Prototypes **************************/
+
+struct net_device * __init sun3lance_probe(int unit)
+{
+ struct net_device *dev;
+ static int found;
+ int err = -ENODEV;
+
+ /* check that this machine has an onboard lance */
+ switch(idprom->id_machtype) {
+ case SM_SUN3|SM_3_50:
+ case SM_SUN3|SM_3_60:
+ case SM_SUN3X|SM_3_80:
+ /* these machines have lance */
+ break;
+
+ default:
+ return ERR_PTR(-ENODEV);
+ }
+
+ if (found)
+ return ERR_PTR(-ENODEV);
+
+ dev = alloc_etherdev(sizeof(struct lance_private));
+ if (!dev)
+ return ERR_PTR(-ENOMEM);
+ if (unit >= 0) {
+ sprintf(dev->name, "eth%d", unit);
+ netdev_boot_setup_check(dev);
+ }
+ SET_MODULE_OWNER(dev);
+
+ if (!lance_probe(dev))
+ goto out;
+
+ err = register_netdev(dev);
+ if (err)
+ goto out1;
+ found = 1;
+ return dev;
+
+out1:
+#ifdef CONFIG_SUN3
+ iounmap((void *)dev->base_addr);
+#endif
+out:
+ free_netdev(dev);
+ return ERR_PTR(err);
+}
+
+static int __init lance_probe( struct net_device *dev)
+{
+ unsigned long ioaddr;
+
+ struct lance_private *lp;
+ int i;
+ static int did_version;
+ volatile unsigned short *ioaddr_probe;
+ unsigned short tmp1, tmp2;
+
+#ifdef CONFIG_SUN3
+ ioaddr = (unsigned long)ioremap(LANCE_OBIO, PAGE_SIZE);
+ if (!ioaddr)
+ return 0;
+#else
+ ioaddr = SUN3X_LANCE;
+#endif
+
+ /* test to see if there's really a lance here */
+ /* (CSRO_INIT shouldn't be readable) */
+
+ ioaddr_probe = (volatile unsigned short *)ioaddr;
+ tmp1 = ioaddr_probe[0];
+ tmp2 = ioaddr_probe[1];
+
+ ioaddr_probe[1] = CSR0;
+ ioaddr_probe[0] = CSR0_INIT | CSR0_STOP;
+
+ if(ioaddr_probe[0] != CSR0_STOP) {
+ ioaddr_probe[0] = tmp1;
+ ioaddr_probe[1] = tmp2;
+
+#ifdef CONFIG_SUN3
+ iounmap((void *)ioaddr);
+#endif
+ return 0;
+ }
+
+ lp = netdev_priv(dev);
+
+ /* XXX - leak? */
+ MEM = dvma_malloc_align(sizeof(struct lance_memory), 0x10000);
+
+ lp->iobase = (volatile unsigned short *)ioaddr;
+ dev->base_addr = (unsigned long)ioaddr; /* informational only */
+
+ REGA(CSR0) = CSR0_STOP;
+
+ request_irq(LANCE_IRQ, lance_interrupt, SA_INTERRUPT, "SUN3 Lance", dev);
+ dev->irq = (unsigned short)LANCE_IRQ;
+
+
+ printk("%s: SUN3 Lance at io %#lx, mem %#lx, irq %d, hwaddr ",
+ dev->name,
+ (unsigned long)ioaddr,
+ (unsigned long)MEM,
+ dev->irq);
+
+ /* copy in the ethernet address from the prom */
+ for(i = 0; i < 6 ; i++)
+ dev->dev_addr[i] = idprom->id_ethaddr[i];
+
+ /* tell the card it's ether address, bytes swapped */
+ MEM->init.hwaddr[0] = dev->dev_addr[1];
+ MEM->init.hwaddr[1] = dev->dev_addr[0];
+ MEM->init.hwaddr[2] = dev->dev_addr[3];
+ MEM->init.hwaddr[3] = dev->dev_addr[2];
+ MEM->init.hwaddr[4] = dev->dev_addr[5];
+ MEM->init.hwaddr[5] = dev->dev_addr[4];
+
+ for( i = 0; i < 6; ++i )
+ printk( "%02x%s", dev->dev_addr[i], (i < 5) ? ":" : "\n" );
+
+ MEM->init.mode = 0x0000;
+ MEM->init.filter[0] = 0x00000000;
+ MEM->init.filter[1] = 0x00000000;
+ MEM->init.rdra = dvma_vtob(MEM->rx_head);
+ MEM->init.rlen = (RX_LOG_RING_SIZE << 13) |
+ (dvma_vtob(MEM->rx_head) >> 16);
+ MEM->init.tdra = dvma_vtob(MEM->tx_head);
+ MEM->init.tlen = (TX_LOG_RING_SIZE << 13) |
+ (dvma_vtob(MEM->tx_head) >> 16);
+
+ DPRINTK(2, ("initaddr: %08lx rx_ring: %08lx tx_ring: %08lx\n",
+ dvma_vtob(&(MEM->init)), dvma_vtob(MEM->rx_head),
+ (dvma_vtob(MEM->tx_head))));
+
+ if (did_version++ == 0)
+ printk( version );
+
+ /* The LANCE-specific entries in the device structure. */
+ dev->open = &lance_open;
+ dev->hard_start_xmit = &lance_start_xmit;
+ dev->stop = &lance_close;
+ dev->get_stats = &lance_get_stats;
+ dev->set_multicast_list = &set_multicast_list;
+ dev->set_mac_address = 0;
+// KLUDGE -- REMOVE ME
+ set_bit(__LINK_STATE_PRESENT, &dev->state);
+
+
+ memset( &lp->stats, 0, sizeof(lp->stats) );
+
+ return 1;
+}
+
+static int lance_open( struct net_device *dev )
+{
+ struct lance_private *lp = netdev_priv(dev);
+ int i;
+
+ DPRINTK( 2, ( "%s: lance_open()\n", dev->name ));
+
+ REGA(CSR0) = CSR0_STOP;
+
+ lance_init_ring(dev);
+
+ /* From now on, AREG is kept to point to CSR0 */
+ REGA(CSR0) = CSR0_INIT;
+
+ i = 1000000;
+ while (--i > 0)
+ if (DREG & CSR0_IDON)
+ break;
+ if (i < 0 || (DREG & CSR0_ERR)) {
+ DPRINTK( 2, ( "lance_open(): opening %s failed, i=%d, csr0=%04x\n",
+ dev->name, i, DREG ));
+ DREG = CSR0_STOP;
+ return( -EIO );
+ }
+
+ DREG = CSR0_IDON | CSR0_STRT | CSR0_INEA;
+
+ netif_start_queue(dev);
+
+ DPRINTK( 2, ( "%s: LANCE is open, csr0 %04x\n", dev->name, DREG ));
+
+ return( 0 );
+}
+
+
+/* Initialize the LANCE Rx and Tx rings. */
+
+static void lance_init_ring( struct net_device *dev )
+{
+ struct lance_private *lp = netdev_priv(dev);
+ int i;
+
+ lp->lock = 0;
+ lp->tx_full = 0;
+ lp->new_rx = lp->new_tx = 0;
+ lp->old_rx = lp->old_tx = 0;
+
+ for( i = 0; i < TX_RING_SIZE; i++ ) {
+ MEM->tx_head[i].base = dvma_vtob(MEM->tx_data[i]);
+ MEM->tx_head[i].flag = 0;
+ MEM->tx_head[i].base_hi =
+ (dvma_vtob(MEM->tx_data[i])) >>16;
+ MEM->tx_head[i].length = 0;
+ MEM->tx_head[i].misc = 0;
+ }
+
+ for( i = 0; i < RX_RING_SIZE; i++ ) {
+ MEM->rx_head[i].base = dvma_vtob(MEM->rx_data[i]);
+ MEM->rx_head[i].flag = RMD1_OWN_CHIP;
+ MEM->rx_head[i].base_hi =
+ (dvma_vtob(MEM->rx_data[i])) >> 16;
+ MEM->rx_head[i].buf_length = -PKT_BUF_SZ | 0xf000;
+ MEM->rx_head[i].msg_length = 0;
+ }
+
+ /* tell the card it's ether address, bytes swapped */
+ MEM->init.hwaddr[0] = dev->dev_addr[1];
+ MEM->init.hwaddr[1] = dev->dev_addr[0];
+ MEM->init.hwaddr[2] = dev->dev_addr[3];
+ MEM->init.hwaddr[3] = dev->dev_addr[2];
+ MEM->init.hwaddr[4] = dev->dev_addr[5];
+ MEM->init.hwaddr[5] = dev->dev_addr[4];
+
+ MEM->init.mode = 0x0000;
+ MEM->init.filter[0] = 0x00000000;
+ MEM->init.filter[1] = 0x00000000;
+ MEM->init.rdra = dvma_vtob(MEM->rx_head);
+ MEM->init.rlen = (RX_LOG_RING_SIZE << 13) |
+ (dvma_vtob(MEM->rx_head) >> 16);
+ MEM->init.tdra = dvma_vtob(MEM->tx_head);
+ MEM->init.tlen = (TX_LOG_RING_SIZE << 13) |
+ (dvma_vtob(MEM->tx_head) >> 16);
+
+
+ /* tell the lance the address of its init block */
+ REGA(CSR1) = dvma_vtob(&(MEM->init));
+ REGA(CSR2) = dvma_vtob(&(MEM->init)) >> 16;
+
+#ifdef CONFIG_SUN3X
+ REGA(CSR3) = CSR3_BSWP | CSR3_ACON | CSR3_BCON;
+#else
+ REGA(CSR3) = CSR3_BSWP;
+#endif
+
+}
+
+
+static int lance_start_xmit( struct sk_buff *skb, struct net_device *dev )
+{
+ struct lance_private *lp = netdev_priv(dev);
+ int entry, len;
+ struct lance_tx_head *head;
+ unsigned long flags;
+
+ DPRINTK( 1, ( "%s: transmit start.\n",
+ dev->name));
+
+ /* Transmitter timeout, serious problems. */
+ if (netif_queue_stopped(dev)) {
+ int tickssofar = jiffies - dev->trans_start;
+ if (tickssofar < 20)
+ return( 1 );
+
+ DPRINTK( 1, ( "%s: transmit timed out, status %04x, resetting.\n",
+ dev->name, DREG ));
+ DREG = CSR0_STOP;
+ /*
+ * Always set BSWP after a STOP as STOP puts it back into
+ * little endian mode.
+ */
+ REGA(CSR3) = CSR3_BSWP;
+ lp->stats.tx_errors++;
+
+ if(lance_debug >= 2) {
+ int i;
+ printk("Ring data: old_tx %d new_tx %d%s new_rx %d\n",
+ lp->old_tx, lp->new_tx,
+ lp->tx_full ? " (full)" : "",
+ lp->new_rx );
+ for( i = 0 ; i < RX_RING_SIZE; i++ )
+ printk( "rx #%d: base=%04x blen=%04x mlen=%04x\n",
+ i, MEM->rx_head[i].base,
+ -MEM->rx_head[i].buf_length,
+ MEM->rx_head[i].msg_length);
+ for( i = 0 ; i < TX_RING_SIZE; i++ )
+ printk("tx #%d: base=%04x len=%04x misc=%04x\n",
+ i, MEM->tx_head[i].base,
+ -MEM->tx_head[i].length,
+ MEM->tx_head[i].misc );
+ }
+
+ lance_init_ring(dev);
+ REGA( CSR0 ) = CSR0_INEA | CSR0_INIT | CSR0_STRT;
+
+ netif_start_queue(dev);
+ dev->trans_start = jiffies;
+
+ return 0;
+ }
+
+
+ /* Block a timer-based transmit from overlapping. This could better be
+ done with atomic_swap(1, dev->tbusy), but set_bit() works as well. */
+
+ /* Block a timer-based transmit from overlapping with us by
+ stopping the queue for a bit... */
+
+ netif_stop_queue(dev);
+
+ if (test_and_set_bit( 0, (void*)&lp->lock ) != 0) {
+ printk( "%s: tx queue lock!.\n", dev->name);
+ /* don't clear dev->tbusy flag. */
+ return 1;
+ }
+
+ AREG = CSR0;
+ DPRINTK( 2, ( "%s: lance_start_xmit() called, csr0 %4.4x.\n",
+ dev->name, DREG ));
+
+#ifdef CONFIG_SUN3X
+ /* this weirdness doesn't appear on sun3... */
+ if(!(DREG & CSR0_INIT)) {
+ DPRINTK( 1, ("INIT not set, reinitializing...\n"));
+ REGA( CSR0 ) = CSR0_STOP;
+ lance_init_ring(dev);
+ REGA( CSR0 ) = CSR0_INIT | CSR0_STRT;
+ }
+#endif
+
+ /* Fill in a Tx ring entry */
+#if 0
+ if (lance_debug >= 2) {
+ u_char *p;
+ int i;
+ printk( "%s: TX pkt %d type 0x%04x from ", dev->name,
+ lp->new_tx, ((u_short *)skb->data)[6]);
+ for( p = &((u_char *)skb->data)[6], i = 0; i < 6; i++ )
+ printk("%02x%s", *p++, i != 5 ? ":" : "" );
+ printk(" to ");
+ for( p = (u_char *)skb->data, i = 0; i < 6; i++ )
+ printk("%02x%s", *p++, i != 5 ? ":" : "" );
+ printk(" data at 0x%08x len %d\n", (int)skb->data,
+ (int)skb->len );
+ }
+#endif
+ /* We're not prepared for the int until the last flags are set/reset.
+ * And the int may happen already after setting the OWN_CHIP... */
+ local_irq_save(flags);
+
+ /* Mask to ring buffer boundary. */
+ entry = lp->new_tx;
+ head = &(MEM->tx_head[entry]);
+
+ /* Caution: the write order is important here, set the "ownership" bits
+ * last.
+ */
+
+ /* the sun3's lance needs it's buffer padded to the minimum
+ size */
+ len = (ETH_ZLEN < skb->len) ? skb->len : ETH_ZLEN;
+
+// head->length = -len;
+ head->length = (-len) | 0xf000;
+ head->misc = 0;
+
+ memcpy( PKTBUF_ADDR(head), (void *)skb->data, skb->len );
+ if (len != skb->len)
+ memset(PKTBUF_ADDR(head) + skb->len, 0, len-skb->len);
+
+ head->flag = TMD1_OWN_CHIP | TMD1_ENP | TMD1_STP;
+ lp->new_tx = (lp->new_tx + 1) & TX_RING_MOD_MASK;
+ lp->stats.tx_bytes += skb->len;
+
+ /* Trigger an immediate send poll. */
+ REGA(CSR0) = CSR0_INEA | CSR0_TDMD | CSR0_STRT;
+ AREG = CSR0;
+ DPRINTK( 2, ( "%s: lance_start_xmit() exiting, csr0 %4.4x.\n",
+ dev->name, DREG ));
+ dev->trans_start = jiffies;
+ dev_kfree_skb( skb );
+
+ lp->lock = 0;
+ if ((MEM->tx_head[(entry+1) & TX_RING_MOD_MASK].flag & TMD1_OWN) ==
+ TMD1_OWN_HOST)
+ netif_start_queue(dev);
+
+ local_irq_restore(flags);
+
+ return 0;
+}
+
+/* The LANCE interrupt handler. */
+
+static irqreturn_t lance_interrupt( int irq, void *dev_id, struct pt_regs *fp)
+{
+ struct net_device *dev = dev_id;
+ struct lance_private *lp = netdev_priv(dev);
+ int csr0;
+ static int in_interrupt;
+
+ if (dev == NULL) {
+ DPRINTK( 1, ( "lance_interrupt(): invalid dev_id\n" ));
+ return IRQ_NONE;
+ }
+
+ if (in_interrupt)
+ DPRINTK( 2, ( "%s: Re-entering the interrupt handler.\n", dev->name ));
+ in_interrupt = 1;
+
+ still_more:
+ flush_cache_all();
+
+ AREG = CSR0;
+ csr0 = DREG;
+
+ /* ack interrupts */
+ DREG = csr0 & (CSR0_TINT | CSR0_RINT | CSR0_IDON);
+
+ /* clear errors */
+ if(csr0 & CSR0_ERR)
+ DREG = CSR0_BABL | CSR0_MERR | CSR0_CERR | CSR0_MISS;
+
+
+ DPRINTK( 2, ( "%s: interrupt csr0=%04x new csr=%04x.\n",
+ dev->name, csr0, DREG ));
+
+ if (csr0 & CSR0_TINT) { /* Tx-done interrupt */
+ int old_tx = lp->old_tx;
+
+// if(lance_debug >= 3) {
+// int i;
+//
+// printk("%s: tx int\n", dev->name);
+//
+// for(i = 0; i < TX_RING_SIZE; i++)
+// printk("ring %d flag=%04x\n", i,
+// MEM->tx_head[i].flag);
+// }
+
+ while( old_tx != lp->new_tx) {
+ struct lance_tx_head *head = &(MEM->tx_head[old_tx]);
+
+ DPRINTK(3, ("on tx_ring %d\n", old_tx));
+
+ if (head->flag & TMD1_OWN_CHIP)
+ break; /* It still hasn't been Txed */
+
+ if (head->flag & TMD1_ERR) {
+ int status = head->misc;
+ lp->stats.tx_errors++;
+ if (status & TMD3_RTRY) lp->stats.tx_aborted_errors++;
+ if (status & TMD3_LCAR) lp->stats.tx_carrier_errors++;
+ if (status & TMD3_LCOL) lp->stats.tx_window_errors++;
+ if (status & (TMD3_UFLO | TMD3_BUFF)) {
+ lp->stats.tx_fifo_errors++;
+ printk("%s: Tx FIFO error\n",
+ dev->name);
+ REGA(CSR0) = CSR0_STOP;
+ REGA(CSR3) = CSR3_BSWP;
+ lance_init_ring(dev);
+ REGA(CSR0) = CSR0_STRT | CSR0_INEA;
+ return IRQ_HANDLED;
+ }
+ } else if(head->flag & (TMD1_ENP | TMD1_STP)) {
+
+ head->flag &= ~(TMD1_ENP | TMD1_STP);
+ if(head->flag & (TMD1_ONE | TMD1_MORE))
+ lp->stats.collisions++;
+
+ lp->stats.tx_packets++;
+ DPRINTK(3, ("cleared tx ring %d\n", old_tx));
+ }
+ old_tx = (old_tx +1) & TX_RING_MOD_MASK;
+ }
+
+ lp->old_tx = old_tx;
+ }
+
+
+ if (netif_queue_stopped(dev)) {
+ /* The ring is no longer full, clear tbusy. */
+ netif_start_queue(dev);
+ netif_wake_queue(dev);
+ }
+
+ if (csr0 & CSR0_RINT) /* Rx interrupt */
+ lance_rx( dev );
+
+ /* Log misc errors. */
+ if (csr0 & CSR0_BABL) lp->stats.tx_errors++; /* Tx babble. */
+ if (csr0 & CSR0_MISS) lp->stats.rx_errors++; /* Missed a Rx frame. */
+ if (csr0 & CSR0_MERR) {
+ DPRINTK( 1, ( "%s: Bus master arbitration failure (?!?), "
+ "status %04x.\n", dev->name, csr0 ));
+ /* Restart the chip. */
+ REGA(CSR0) = CSR0_STOP;
+ REGA(CSR3) = CSR3_BSWP;
+ lance_init_ring(dev);
+ REGA(CSR0) = CSR0_STRT | CSR0_INEA;
+ }
+
+
+ /* Clear any other interrupt, and set interrupt enable. */
+// DREG = CSR0_BABL | CSR0_CERR | CSR0_MISS | CSR0_MERR |
+// CSR0_IDON | CSR0_INEA;
+
+ REGA(CSR0) = CSR0_INEA;
+
+ if(DREG & (CSR0_RINT | CSR0_TINT)) {
+ DPRINTK(2, ("restarting interrupt, csr0=%#04x\n", DREG));
+ goto still_more;
+ }
+
+ DPRINTK( 2, ( "%s: exiting interrupt, csr0=%#04x.\n",
+ dev->name, DREG ));
+ in_interrupt = 0;
+ return IRQ_HANDLED;
+}
+
+/* get packet, toss into skbuff */
+static int lance_rx( struct net_device *dev )
+{
+ struct lance_private *lp = netdev_priv(dev);
+ int entry = lp->new_rx;
+
+ /* If we own the next entry, it's a new packet. Send it up. */
+ while( (MEM->rx_head[entry].flag & RMD1_OWN) == RMD1_OWN_HOST ) {
+ struct lance_rx_head *head = &(MEM->rx_head[entry]);
+ int status = head->flag;
+
+ if (status != (RMD1_ENP|RMD1_STP)) { /* There was an error. */
+ /* There is a tricky error noted by John Murphy,
+ <murf@perftech.com> to Russ Nelson: Even with
+ full-sized buffers it's possible for a jabber packet to use two
+ buffers, with only the last correctly noting the error. */
+ if (status & RMD1_ENP) /* Only count a general error at the */
+ lp->stats.rx_errors++; /* end of a packet.*/
+ if (status & RMD1_FRAM) lp->stats.rx_frame_errors++;
+ if (status & RMD1_OFLO) lp->stats.rx_over_errors++;
+ if (status & RMD1_CRC) lp->stats.rx_crc_errors++;
+ if (status & RMD1_BUFF) lp->stats.rx_fifo_errors++;
+ head->flag &= (RMD1_ENP|RMD1_STP);
+ } else {
+ /* Malloc up new buffer, compatible with net-3. */
+// short pkt_len = head->msg_length;// & 0xfff;
+ short pkt_len = (head->msg_length & 0xfff) - 4;
+ struct sk_buff *skb;
+
+ if (pkt_len < 60) {
+ printk( "%s: Runt packet!\n", dev->name );
+ lp->stats.rx_errors++;
+ }
+ else {
+ skb = dev_alloc_skb( pkt_len+2 );
+ if (skb == NULL) {
+ DPRINTK( 1, ( "%s: Memory squeeze, deferring packet.\n",
+ dev->name ));
+
+ lp->stats.rx_dropped++;
+ head->msg_length = 0;
+ head->flag |= RMD1_OWN_CHIP;
+ lp->new_rx = (lp->new_rx+1) &
+ RX_RING_MOD_MASK;
+ }
+
+#if 0
+ if (lance_debug >= 3) {
+ u_char *data = PKTBUF_ADDR(head), *p;
+ printk( "%s: RX pkt %d type 0x%04x from ", dev->name, entry, ((u_short *)data)[6]);
+ for( p = &data[6], i = 0; i < 6; i++ )
+ printk("%02x%s", *p++, i != 5 ? ":" : "" );
+ printk(" to ");
+ for( p = data, i = 0; i < 6; i++ )
+ printk("%02x%s", *p++, i != 5 ? ":" : "" );
+ printk(" data %02x %02x %02x %02x %02x %02x %02x %02x "
+ "len %d at %08x\n",
+ data[15], data[16], data[17], data[18],
+ data[19], data[20], data[21], data[22],
+ pkt_len, data);
+ }
+#endif
+ if (lance_debug >= 3) {
+ u_char *data = PKTBUF_ADDR(head);
+ printk( "%s: RX pkt %d type 0x%04x len %d\n ", dev->name, entry, ((u_short *)data)[6], pkt_len);
+ }
+
+
+ skb->dev = dev;
+ skb_reserve( skb, 2 ); /* 16 byte align */
+ skb_put( skb, pkt_len ); /* Make room */
+// memcpy( skb->data, PKTBUF_ADDR(head), pkt_len );
+ eth_copy_and_sum(skb,
+ PKTBUF_ADDR(head),
+ pkt_len, 0);
+
+ skb->protocol = eth_type_trans( skb, dev );
+ netif_rx( skb );
+ dev->last_rx = jiffies;
+ lp->stats.rx_packets++;
+ lp->stats.rx_bytes += pkt_len;
+ }
+ }
+
+// head->buf_length = -PKT_BUF_SZ | 0xf000;
+ head->msg_length = 0;
+ head->flag = RMD1_OWN_CHIP;
+
+ entry = lp->new_rx = (lp->new_rx +1) & RX_RING_MOD_MASK;
+ }
+
+ /* From lance.c (Donald Becker): */
+ /* We should check that at least two ring entries are free.
+ If not, we should free one and mark stats->rx_dropped++. */
+
+ return 0;
+}
+
+
+static int lance_close( struct net_device *dev )
+{
+ struct lance_private *lp = netdev_priv(dev);
+
+ netif_stop_queue(dev);
+
+ AREG = CSR0;
+
+ DPRINTK( 2, ( "%s: Shutting down ethercard, status was %2.2x.\n",
+ dev->name, DREG ));
+
+ /* We stop the LANCE here -- it occasionally polls
+ memory if we don't. */
+ DREG = CSR0_STOP;
+ return 0;
+}
+
+
+static struct net_device_stats *lance_get_stats( struct net_device *dev )
+{
+ struct lance_private *lp = netdev_priv(dev);
+
+ return &lp->stats;
+}
+
+
+/* Set or clear the multicast filter for this adaptor.
+ num_addrs == -1 Promiscuous mode, receive all packets
+ num_addrs == 0 Normal mode, clear multicast list
+ num_addrs > 0 Multicast mode, receive normal and MC packets, and do
+ best-effort filtering.
+ */
+
+/* completely untested on a sun3 */
+static void set_multicast_list( struct net_device *dev )
+{
+ struct lance_private *lp = netdev_priv(dev);
+
+ if(netif_queue_stopped(dev))
+ /* Only possible if board is already started */
+ return;
+
+ /* We take the simple way out and always enable promiscuous mode. */
+ DREG = CSR0_STOP; /* Temporarily stop the lance. */
+
+ if (dev->flags & IFF_PROMISC) {
+ /* Log any net taps. */
+ DPRINTK( 1, ( "%s: Promiscuous mode enabled.\n", dev->name ));
+ REGA( CSR15 ) = 0x8000; /* Set promiscuous mode */
+ } else {
+ short multicast_table[4];
+ int num_addrs = dev->mc_count;
+ int i;
+ /* We don't use the multicast table, but rely on upper-layer
+ * filtering. */
+ memset( multicast_table, (num_addrs == 0) ? 0 : -1,
+ sizeof(multicast_table) );
+ for( i = 0; i < 4; i++ )
+ REGA( CSR8+i ) = multicast_table[i];
+ REGA( CSR15 ) = 0; /* Unset promiscuous mode */
+ }
+
+ /*
+ * Always set BSWP after a STOP as STOP puts it back into
+ * little endian mode.
+ */
+ REGA( CSR3 ) = CSR3_BSWP;
+
+ /* Resume normal operation and reset AREG to CSR0 */
+ REGA( CSR0 ) = CSR0_IDON | CSR0_INEA | CSR0_STRT;
+}
+
+
+#ifdef MODULE
+
+static struct net_device *sun3lance_dev;
+
+int init_module(void)
+{
+ sun3lance_dev = sun3lance_probe(-1);
+ if (IS_ERR(sun3lance_dev))
+ return PTR_ERR(sun3lance_dev);
+ return 0;
+}
+
+void cleanup_module(void)
+{
+ unregister_netdev(sun3lance_dev);
+#ifdef CONFIG_SUN3
+ iounmap((void *)sun3lance_dev->base_addr);
+#endif
+ free_netdev(sun3lance_dev);
+}
+
+#endif /* MODULE */
+