Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/drivers/net/wan/Makefile b/drivers/net/wan/Makefile
new file mode 100644
index 0000000..ce6c56b
--- /dev/null
+++ b/drivers/net/wan/Makefile
@@ -0,0 +1,86 @@
+#
+# Makefile for the Linux network (wan) device drivers.
+#
+# 3 Aug 2000, Christoph Hellwig <hch@infradead.org>
+# Rewritten to use lists instead of if-statements.
+#
+
+wanpipe-y := sdlamain.o sdla_ft1.o
+wanpipe-$(CONFIG_WANPIPE_X25) += sdla_x25.o
+wanpipe-$(CONFIG_WANPIPE_FR) += sdla_fr.o
+wanpipe-$(CONFIG_WANPIPE_CHDLC) += sdla_chdlc.o
+wanpipe-$(CONFIG_WANPIPE_PPP) += sdla_ppp.o
+wanpipe-$(CONFIG_WANPIPE_MULTPPP) += wanpipe_multppp.o
+wanpipe-objs := $(wanpipe-y)
+
+cyclomx-y := cycx_main.o
+cyclomx-$(CONFIG_CYCLOMX_X25) += cycx_x25.o
+cyclomx-objs := $(cyclomx-y)
+
+hdlc-y := hdlc_generic.o
+hdlc-$(CONFIG_HDLC_RAW) += hdlc_raw.o
+hdlc-$(CONFIG_HDLC_RAW_ETH) += hdlc_raw_eth.o
+hdlc-$(CONFIG_HDLC_CISCO) += hdlc_cisco.o
+hdlc-$(CONFIG_HDLC_FR) += hdlc_fr.o
+hdlc-$(CONFIG_HDLC_PPP) += hdlc_ppp.o
+hdlc-$(CONFIG_HDLC_X25) += hdlc_x25.o
+hdlc-objs := $(hdlc-y)
+
+pc300-y := pc300_drv.o
+pc300-$(CONFIG_PC300_MLPPP) += pc300_tty.o
+pc300-objs := $(pc300-y)
+
+obj-$(CONFIG_HOSTESS_SV11) += z85230.o syncppp.o hostess_sv11.o
+obj-$(CONFIG_SEALEVEL_4021) += z85230.o syncppp.o sealevel.o
+obj-$(CONFIG_COSA) += syncppp.o cosa.o
+obj-$(CONFIG_FARSYNC) += syncppp.o farsync.o
+obj-$(CONFIG_DSCC4) += dscc4.o
+obj-$(CONFIG_LANMEDIA) += syncppp.o
+obj-$(CONFIG_SYNCLINK_SYNCPPP) += syncppp.o
+obj-$(CONFIG_X25_ASY) += x25_asy.o
+
+obj-$(CONFIG_LANMEDIA) += lmc/
+
+obj-$(CONFIG_DLCI) += dlci.o
+obj-$(CONFIG_SDLA) += sdla.o
+ifeq ($(CONFIG_WANPIPE_MULTPPP),y)
+ obj-$(CONFIG_VENDOR_SANGOMA) += sdladrv.o wanpipe.o syncppp.o
+else
+ obj-$(CONFIG_VENDOR_SANGOMA) += sdladrv.o wanpipe.o
+endif
+obj-$(CONFIG_CYCLADES_SYNC) += cycx_drv.o cyclomx.o
+obj-$(CONFIG_LAPBETHER) += lapbether.o
+obj-$(CONFIG_SBNI) += sbni.o
+obj-$(CONFIG_PC300) += pc300.o
+obj-$(CONFIG_HDLC) += hdlc.o
+ifeq ($(CONFIG_HDLC_PPP),y)
+ obj-$(CONFIG_HDLC) += syncppp.o
+endif
+obj-$(CONFIG_N2) += n2.o
+obj-$(CONFIG_C101) += c101.o
+obj-$(CONFIG_WANXL) += wanxl.o
+obj-$(CONFIG_PCI200SYN) += pci200syn.o
+
+clean-files := wanxlfw.inc
+$(obj)/wanxl.o: $(obj)/wanxlfw.inc
+
+ifeq ($(CONFIG_WANXL_BUILD_FIRMWARE),y)
+ifeq ($(ARCH),m68k)
+ AS68K = $(AS)
+ LD68K = $(LD)
+else
+ AS68K = as68k
+ LD68K = ld68k
+endif
+
+quiet_cmd_build_wanxlfw = BLD FW $@
+ cmd_build_wanxlfw = \
+ $(CPP) -Wp,-MD,$(depfile) -I$(srctree)/include $< | $(AS68K) -m68360 -o $(obj)/wanxlfw.o; \
+ $(LD68K) --oformat binary -Ttext 0x1000 $(obj)/wanxlfw.o -o $(obj)/wanxlfw.bin; \
+ hexdump -ve '"\n" 16/1 "0x%02X,"' $(obj)/wanxlfw.bin | sed 's/0x ,//g;1s/^/static u8 firmware[]={/;$$s/,$$/\n};\n/' >$(obj)/wanxlfw.inc; \
+ rm -f $(obj)/wanxlfw.bin $(obj)/wanxlfw.o
+
+$(obj)/wanxlfw.inc: $(src)/wanxlfw.S
+ $(call if_changed_dep,build_wanxlfw)
+targets += wanxlfw.inc
+endif