Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/drivers/net/wireless/Kconfig b/drivers/net/wireless/Kconfig
new file mode 100644
index 0000000..0aaa12c
--- /dev/null
+++ b/drivers/net/wireless/Kconfig
@@ -0,0 +1,365 @@
+#
+# Wireless LAN device configuration
+#
+
+menu "Wireless LAN (non-hamradio)"
+ depends on NETDEVICES
+
+config NET_RADIO
+ bool "Wireless LAN drivers (non-hamradio) & Wireless Extensions"
+ ---help---
+ Support for wireless LANs and everything having to do with radio,
+ but not with amateur radio or FM broadcasting.
+
+ Saying Y here also enables the Wireless Extensions (creates
+ /proc/net/wireless and enables iwconfig access). The Wireless
+ Extension is a generic API allowing a driver to expose to the user
+ space configuration and statistics specific to common Wireless LANs.
+ The beauty of it is that a single set of tool can support all the
+ variations of Wireless LANs, regardless of their type (as long as
+ the driver supports Wireless Extension). Another advantage is that
+ these parameters may be changed on the fly without restarting the
+ driver (or Linux). If you wish to use Wireless Extensions with
+ wireless PCMCIA (PC-) cards, you need to say Y here; you can fetch
+ the tools from
+ <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>.
+
+ Some user-level drivers for scarab devices which don't require
+ special kernel support are available from
+ <ftp://shadow.cabi.net/pub/Linux/>.
+
+# Note : the cards are obsolete (can't buy them anymore), but the drivers
+# are not, as people are still using them...
+comment "Obsolete Wireless cards support (pre-802.11)"
+ depends on NET_RADIO && (INET || ISA || PCMCIA)
+
+config STRIP
+ tristate "STRIP (Metricom starmode radio IP)"
+ depends on NET_RADIO && INET
+ ---help---
+ Say Y if you have a Metricom radio and intend to use Starmode Radio
+ IP. STRIP is a radio protocol developed for the MosquitoNet project
+ (on the WWW at <http://mosquitonet.stanford.edu/>) to send Internet
+ traffic using Metricom radios. Metricom radios are small, battery
+ powered, 100kbit/sec packet radio transceivers, about the size and
+ weight of a cellular telephone. (You may also have heard them called
+ "Metricom modems" but we avoid the term "modem" because it misleads
+ many people into thinking that you can plug a Metricom modem into a
+ phone line and use it as a modem.)
+
+ You can use STRIP on any Linux machine with a serial port, although
+ it is obviously most useful for people with laptop computers. If you
+ think you might get a Metricom radio in the future, there is no harm
+ in saying Y to STRIP now, except that it makes the kernel a bit
+ bigger.
+
+ To compile this as a module, choose M here: the module will be
+ called strip.
+
+config ARLAN
+ tristate "Aironet Arlan 655 & IC2200 DS support"
+ depends on NET_RADIO && ISA && !64BIT
+ ---help---
+ Aironet makes Arlan, a class of wireless LAN adapters. These use the
+ www.Telxon.com chip, which is also used on several similar cards.
+ This driver is tested on the 655 and IC2200 series cards. Look at
+ <http://www.ylenurme.ee/~elmer/655/> for the latest information.
+
+ The driver is built as two modules, arlan and arlan-proc. The latter
+ is the /proc interface and is not needed most of time.
+
+ On some computers the card ends up in non-valid state after some
+ time. Use a ping-reset script to clear it.
+
+config WAVELAN
+ tristate "AT&T/Lucent old WaveLAN & DEC RoamAbout DS ISA support"
+ depends on NET_RADIO && ISA
+ ---help---
+ The Lucent WaveLAN (formerly NCR and AT&T; or DEC RoamAbout DS) is
+ a Radio LAN (wireless Ethernet-like Local Area Network) using the
+ radio frequencies 900 MHz and 2.4 GHz.
+
+ This driver support the ISA version of the WaveLAN card. A separate
+ driver for the PCMCIA (PC-card) hardware is available in David
+ Hinds' pcmcia-cs package (see the file <file:Documentation/Changes>
+ for location).
+
+ If you want to use an ISA WaveLAN card under Linux, say Y and read
+ the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>. Some more specific
+ information is contained in
+ <file:Documentation/networking/wavelan.txt> and in the source code
+ <file:drivers/net/wavelan.p.h>.
+
+ You will also need the wireless tools package available from
+ <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>.
+ Please read the man pages contained therein.
+
+ To compile this driver as a module, choose M here: the module will be
+ called wavelan.
+
+config PCMCIA_WAVELAN
+ tristate "AT&T/Lucent old WaveLAN Pcmcia wireless support"
+ depends on NET_RADIO && PCMCIA
+ help
+ Say Y here if you intend to attach an AT&T/Lucent Wavelan PCMCIA
+ (PC-card) wireless Ethernet networking card to your computer. This
+ driver is for the non-IEEE-802.11 Wavelan cards.
+
+ To compile this driver as a module, choose M here: the module will be
+ called wavelan_cs. If unsure, say N.
+
+config PCMCIA_NETWAVE
+ tristate "Xircom Netwave AirSurfer Pcmcia wireless support"
+ depends on NET_RADIO && PCMCIA
+ help
+ Say Y here if you intend to attach this type of PCMCIA (PC-card)
+ wireless Ethernet networking card to your computer.
+
+ To compile this driver as a module, choose M here: the module will be
+ called netwave_cs. If unsure, say N.
+
+comment "Wireless 802.11 Frequency Hopping cards support"
+ depends on NET_RADIO && PCMCIA
+
+config PCMCIA_RAYCS
+ tristate "Aviator/Raytheon 2.4MHz wireless support"
+ depends on NET_RADIO && PCMCIA
+ ---help---
+ Say Y here if you intend to attach an Aviator/Raytheon PCMCIA
+ (PC-card) wireless Ethernet networking card to your computer.
+ Please read the file <file:Documentation/networking/ray_cs.txt> for
+ details.
+
+ To compile this driver as a module, choose M here: the module will be
+ called ray_cs. If unsure, say N.
+
+comment "Wireless 802.11b ISA/PCI cards support"
+ depends on NET_RADIO && (ISA || PCI || PPC_PMAC || PCMCIA)
+
+config AIRO
+ tristate "Cisco/Aironet 34X/35X/4500/4800 ISA and PCI cards"
+ depends on NET_RADIO && ISA && (PCI || BROKEN)
+ ---help---
+ This is the standard Linux driver to support Cisco/Aironet ISA and
+ PCI 802.11 wireless cards.
+ It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X
+ - with or without encryption) as well as card before the Cisco
+ aquisition (Aironet 4500, Aironet 4800, Aironet 4800B).
+
+ This driver support both the standard Linux Wireless Extensions
+ and Cisco proprietary API, so both the Linux Wireless Tools and the
+ Cisco Linux utilities can be used to configure the card.
+
+ The driver can be compiled as a module and will be named "airo".
+
+config HERMES
+ tristate "Hermes chipset 802.11b support (Orinoco/Prism2/Symbol)"
+ depends on NET_RADIO && (PPC_PMAC || PCI || PCMCIA)
+ ---help---
+ A driver for 802.11b wireless cards based based on the "Hermes" or
+ Intersil HFA384x (Prism 2) MAC controller. This includes the vast
+ majority of the PCMCIA 802.11b cards (which are nearly all rebadges)
+ - except for the Cisco/Aironet cards. Cards supported include the
+ Apple Airport (not a PCMCIA card), WavelanIEEE/Orinoco,
+ Cabletron/EnteraSys Roamabout, ELSA AirLancer, MELCO Buffalo, Avaya,
+ IBM High Rate Wireless, Farralon Syyline, Samsung MagicLAN, Netgear
+ MA401, LinkSys WPC-11, D-Link DWL-650, 3Com AirConnect, Intel
+ PRO/Wireless, and Symbol Spectrum24 High Rate amongst others.
+
+ This option includes the guts of the driver, but in order to
+ actually use a card you will also need to enable support for PCMCIA
+ Hermes cards, PLX9052 based PCI adaptors or the Apple Airport below.
+
+ You will also very likely also need the Wireless Tools in order to
+ configure your card and that /etc/pcmcia/wireless.opts works :
+ <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>
+
+config APPLE_AIRPORT
+ tristate "Apple Airport support (built-in)"
+ depends on PPC_PMAC && HERMES
+ help
+ Say Y here to support the Airport 802.11b wireless Ethernet hardware
+ built into the Macintosh iBook and other recent PowerPC-based
+ Macintosh machines. This is essentially a Lucent Orinoco card with
+ a non-standard interface
+
+config PLX_HERMES
+ tristate "Hermes in PLX9052 based PCI adaptor support (Netgear MA301 etc.) (EXPERIMENTAL)"
+ depends on PCI && HERMES && EXPERIMENTAL
+ help
+ Enable support for PCMCIA cards supported by the "Hermes" (aka
+ orinoco) driver when used in PLX9052 based PCI adaptors. These
+ adaptors are not a full PCMCIA controller but act as a more limited
+ PCI <-> PCMCIA bridge. Several vendors sell such adaptors so that
+ 802.11b PCMCIA cards can be used in desktop machines. The Netgear
+ MA301 is such an adaptor.
+
+ Support for these adaptors is so far still incomplete and buggy.
+ You have been warned.
+
+config TMD_HERMES
+ tristate "Hermes in TMD7160 based PCI adaptor support (EXPERIMENTAL)"
+ depends on PCI && HERMES && EXPERIMENTAL
+ help
+ Enable support for PCMCIA cards supported by the "Hermes" (aka
+ orinoco) driver when used in TMD7160 based PCI adaptors. These
+ adaptors are not a full PCMCIA controller but act as a more limited
+ PCI <-> PCMCIA bridge. Several vendors sell such adaptors so that
+ 802.11b PCMCIA cards can be used in desktop machines.
+
+ Support for these adaptors is so far still incomplete and buggy.
+ You have been warned.
+
+config PCI_HERMES
+ tristate "Prism 2.5 PCI 802.11b adaptor support (EXPERIMENTAL)"
+ depends on PCI && HERMES && EXPERIMENTAL
+ help
+ Enable support for PCI and mini-PCI 802.11b wireless NICs based on
+ the Prism 2.5 chipset. These are true PCI cards, not the 802.11b
+ PCMCIA cards bundled with PCI<->PCMCIA adaptors which are also
+ common. Some of the built-in wireless adaptors in laptops are of
+ this variety.
+
+config ATMEL
+ tristate "Atmel at76c50x chipset 802.11b support"
+ depends on NET_RADIO && EXPERIMENTAL
+ select FW_LOADER
+ select CRC32
+ ---help---
+ A driver 802.11b wireless cards based on the Atmel fast-vnet
+ chips. This driver supports standard Linux wireless extensions.
+
+ Many cards based on this chipset do not have flash memory
+ and need their firmware loaded at start-up. If yours is
+ one of these, you will need to provide a firmware image
+ to be loaded into the card by the driver. The Atmel
+ firmware package can be downloaded from
+ <http://www.thekelleys.org.uk/atmel>
+
+config PCI_ATMEL
+ tristate "Atmel at76c506 PCI cards"
+ depends on ATMEL && PCI
+ ---help---
+ Enable support for PCI and mini-PCI cards containing the
+ Atmel at76c506 chip.
+
+# If Pcmcia is compiled in, offer Pcmcia cards...
+comment "Wireless 802.11b Pcmcia/Cardbus cards support"
+ depends on NET_RADIO && PCMCIA
+
+config PCMCIA_HERMES
+ tristate "Hermes PCMCIA card support"
+ depends on NET_RADIO && PCMCIA && HERMES
+ ---help---
+ A driver for "Hermes" chipset based PCMCIA wireless adaptors, such
+ as the Lucent WavelanIEEE/Orinoco cards and their OEM (Cabletron/
+ EnteraSys RoamAbout 802.11, ELSA Airlancer, Melco Buffalo and
+ others). It should also be usable on various Prism II based cards
+ such as the Linksys, D-Link and Farallon Skyline. It should also
+ work on Symbol cards such as the 3Com AirConnect and Ericsson WLAN.
+
+ To use your PC-cards, you will need supporting software from David
+ Hinds' pcmcia-cs package (see the file <file:Documentation/Changes>
+ for location). You also want to check out the PCMCIA-HOWTO,
+ available from <http://www.tldp.org/docs.html#howto>.
+
+ You will also very likely also need the Wireless Tools in order to
+ configure your card and that /etc/pcmcia/wireless.opts works:
+ <http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html>.
+
+config AIRO_CS
+ tristate "Cisco/Aironet 34X/35X/4500/4800 PCMCIA cards"
+ depends on NET_RADIO && PCMCIA
+ ---help---
+ This is the standard Linux driver to support Cisco/Aironet PCMCIA
+ 802.11 wireless cards. This driver is the same as the Aironet
+ driver part of the Linux Pcmcia package.
+ It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X
+ - with or without encryption) as well as card before the Cisco
+ aquisition (Aironet 4500, Aironet 4800, Aironet 4800B). It also
+ supports OEM of Cisco such as the DELL TrueMobile 4800 and Xircom
+ 802.11b cards.
+
+ This driver support both the standard Linux Wireless Extensions
+ and Cisco proprietary API, so both the Linux Wireless Tools and the
+ Cisco Linux utilities can be used to configure the card.
+
+ To use your PC-cards, you will need supporting software from David
+ Hinds' pcmcia-cs package (see the file <file:Documentation/Changes>
+ for location). You also want to check out the PCMCIA-HOWTO,
+ available from <http://www.tldp.org/docs.html#howto>.
+
+config PCMCIA_ATMEL
+ tristate "Atmel at76c502/at76c504 PCMCIA cards"
+ depends on NET_RADIO && ATMEL && PCMCIA
+ select FW_LOADER
+ select CRC32
+ ---help---
+ Enable support for PCMCIA cards containing the
+ Atmel at76c502 and at76c504 chips.
+
+config PCMCIA_WL3501
+ tristate "Planet WL3501 PCMCIA cards"
+ depends on NET_RADIO && EXPERIMENTAL && PCMCIA
+ ---help---
+ A driver for WL3501 PCMCIA 802.11 wireless cards made by Planet.
+ It has basic support for Linux wireless extensions and initial
+ micro support for ethtool.
+
+comment "Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support"
+ depends on NET_RADIO && PCI
+config PRISM54
+ tristate 'Intersil Prism GT/Duette/Indigo PCI/Cardbus'
+ depends on PCI && NET_RADIO && EXPERIMENTAL
+ select FW_LOADER
+ ---help---
+ Enable PCI and Cardbus support for the following chipset based cards:
+
+ ISL3880 - Prism GT 802.11 b/g
+ ISL3877 - Prism Indigo 802.11 a
+ ISL3890 - Prism Duette 802.11 a/b/g
+
+ For a complete list of supported cards visit <http://prism54.org>.
+ Here is the latest confirmed list of supported cards:
+
+ 3com OfficeConnect 11g Cardbus Card aka 3CRWE154G72
+ Allnet ALL0271 PCI Card
+ Compex WL54G Cardbus Card
+ Corega CG-WLCB54GT Cardbus Card
+ D-Link Air Plus Xtreme G A1 Cardbus Card aka DWL-g650
+ I-O Data WN-G54/CB Cardbus Card
+ Kobishi XG-300 aka Z-Com Cardbus Card
+ Netgear WG511 Cardbus Card
+ Ovislink WL-5400PCI PCI Card
+ Peabird WLG-PCI PCI Card
+ Sitecom WL-100i Cardbus Card
+ Sitecom WL-110i PCI Card
+ SMC2802W - EZ Connect g 2.4GHz 54 Mbps Wireless PCI Card
+ SMC2835W - EZ Connect g 2.4GHz 54 Mbps Wireless Cardbus Card
+ SMC2835W-V2 - EZ Connect g 2.4GHz 54 Mbps Wireless Cardbus Card
+ Z-Com XG-900 PCI Card
+ Zyxel G-100 Cardbus Card
+
+ If you enable this you will need a firmware file as well.
+ You will need to copy this to /usr/lib/hotplug/firmware/isl3890.
+ You can get this non-GPL'd firmware file from the Prism54 project page:
+ <http://prism54.org>
+ You will also need the /etc/hotplug/firmware.agent script from
+ a current hotplug package.
+
+ Note: You need a motherboard with DMA support to use any of these cards
+
+ If you want to compile the driver as a module ( = code which can be
+ inserted in and removed from the running kernel whenever you want),
+ say M here and read <file:Documentation/modules.txt>. The module
+ will be called prism54.ko.
+
+# yes, this works even when no drivers are selected
+config NET_WIRELESS
+ bool
+ depends on NET_RADIO && (ISA || PCI || PPC_PMAC || PCMCIA)
+ default y
+
+endmenu
+
diff --git a/drivers/net/wireless/Makefile b/drivers/net/wireless/Makefile
new file mode 100644
index 0000000..2b87841
--- /dev/null
+++ b/drivers/net/wireless/Makefile
@@ -0,0 +1,33 @@
+#
+# Makefile for the Linux Wireless network device drivers.
+#
+
+obj-$(CONFIG_STRIP) += strip.o
+obj-$(CONFIG_ARLAN) += arlan.o
+
+arlan-objs := arlan-main.o arlan-proc.o
+
+# Obsolete cards
+obj-$(CONFIG_WAVELAN) += wavelan.o
+obj-$(CONFIG_PCMCIA_NETWAVE) += netwave_cs.o
+obj-$(CONFIG_PCMCIA_WAVELAN) += wavelan_cs.o
+
+obj-$(CONFIG_HERMES) += orinoco.o hermes.o
+obj-$(CONFIG_PCMCIA_HERMES) += orinoco_cs.o
+obj-$(CONFIG_APPLE_AIRPORT) += airport.o
+obj-$(CONFIG_PLX_HERMES) += orinoco_plx.o
+obj-$(CONFIG_PCI_HERMES) += orinoco_pci.o
+obj-$(CONFIG_TMD_HERMES) += orinoco_tmd.o
+
+obj-$(CONFIG_AIRO) += airo.o
+obj-$(CONFIG_AIRO_CS) += airo_cs.o airo.o
+
+obj-$(CONFIG_ATMEL) += atmel.o
+obj-$(CONFIG_PCI_ATMEL) += atmel_pci.o
+obj-$(CONFIG_PCMCIA_ATMEL) += atmel_cs.o
+
+obj-$(CONFIG_PRISM54) += prism54/
+
+# 16-bit wireless PCMCIA client drivers
+obj-$(CONFIG_PCMCIA_RAYCS) += ray_cs.o
+obj-$(CONFIG_PCMCIA_WL3501) += wl3501_cs.o
diff --git a/drivers/net/wireless/README b/drivers/net/wireless/README
new file mode 100644
index 0000000..0c274bf
--- /dev/null
+++ b/drivers/net/wireless/README
@@ -0,0 +1,25 @@
+ README
+ ------
+
+ This directory is mostly for Wireless LAN drivers, in their
+various incarnations (ISA, PCI, Pcmcia...).
+ This separate directory is needed because a lot of driver work
+on different bus (typically PCI + Pcmcia) and share 95% of the
+code. This allow the code and the config options to be in one single
+place instead of scattered all over the driver tree, which is never
+100% satisfactory.
+
+ Note : if you want more info on the topic of Wireless LANs,
+you are kindly invited to have a look at the Wireless Howto :
+ http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/
+ Some Wireless LAN drivers, like orinoco_cs, require the use of
+Wireless Tools to be configured :
+ http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Tools.html
+
+ Special notes for distribution maintainers :
+ 1) wvlan_cs will be discontinued soon in favor of orinoco_cs
+ 2) Please add Wireless Tools support in your scripts
+
+ Have fun...
+
+ Jean
diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c
new file mode 100644
index 0000000..2899144
--- /dev/null
+++ b/drivers/net/wireless/airo.c
@@ -0,0 +1,7667 @@
+/*======================================================================
+
+ Aironet driver for 4500 and 4800 series cards
+
+ This code is released under both the GPL version 2 and BSD licenses.
+ Either license may be used. The respective licenses are found at
+ the end of this file.
+
+ This code was developed by Benjamin Reed <breed@users.sourceforge.net>
+ including portions of which come from the Aironet PC4500
+ Developer's Reference Manual and used with permission. Copyright
+ (C) 1999 Benjamin Reed. All Rights Reserved. Permission to use
+ code in the Developer's manual was granted for this driver by
+ Aironet. Major code contributions were received from Javier Achirica
+ <achirica@users.sourceforge.net> and Jean Tourrilhes <jt@hpl.hp.com>.
+ Code was also integrated from the Cisco Aironet driver for Linux.
+ Support for MPI350 cards was added by Fabrice Bellet
+ <fabrice@bellet.info>.
+
+======================================================================*/
+
+#include <linux/config.h>
+#include <linux/init.h>
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/proc_fs.h>
+#include <linux/smp_lock.h>
+
+#include <linux/sched.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/in.h>
+#include <linux/bitops.h>
+#include <asm/io.h>
+#include <asm/system.h>
+
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/if_arp.h>
+#include <linux/ioport.h>
+#include <linux/pci.h>
+#include <asm/uaccess.h>
+
+#ifdef CONFIG_PCI
+static struct pci_device_id card_ids[] = {
+ { 0x14b9, 1, PCI_ANY_ID, PCI_ANY_ID, },
+ { 0x14b9, 0x4500, PCI_ANY_ID, PCI_ANY_ID },
+ { 0x14b9, 0x4800, PCI_ANY_ID, PCI_ANY_ID, },
+ { 0x14b9, 0x0340, PCI_ANY_ID, PCI_ANY_ID, },
+ { 0x14b9, 0x0350, PCI_ANY_ID, PCI_ANY_ID, },
+ { 0x14b9, 0x5000, PCI_ANY_ID, PCI_ANY_ID, },
+ { 0x14b9, 0xa504, PCI_ANY_ID, PCI_ANY_ID, },
+ { 0, }
+};
+MODULE_DEVICE_TABLE(pci, card_ids);
+
+static int airo_pci_probe(struct pci_dev *, const struct pci_device_id *);
+static void airo_pci_remove(struct pci_dev *);
+static int airo_pci_suspend(struct pci_dev *pdev, u32 state);
+static int airo_pci_resume(struct pci_dev *pdev);
+
+static struct pci_driver airo_driver = {
+ .name = "airo",
+ .id_table = card_ids,
+ .probe = airo_pci_probe,
+ .remove = __devexit_p(airo_pci_remove),
+ .suspend = airo_pci_suspend,
+ .resume = airo_pci_resume,
+};
+#endif /* CONFIG_PCI */
+
+/* Include Wireless Extension definition and check version - Jean II */
+#include <linux/wireless.h>
+#define WIRELESS_SPY // enable iwspy support
+#include <net/iw_handler.h> // New driver API
+
+#define CISCO_EXT // enable Cisco extensions
+#ifdef CISCO_EXT
+#include <linux/delay.h>
+#endif
+
+/* Support Cisco MIC feature */
+#define MICSUPPORT
+
+#if defined(MICSUPPORT) && !defined(CONFIG_CRYPTO)
+#warning MIC support requires Crypto API
+#undef MICSUPPORT
+#endif
+
+/* Hack to do some power saving */
+#define POWER_ON_DOWN
+
+/* As you can see this list is HUGH!
+ I really don't know what a lot of these counts are about, but they
+ are all here for completeness. If the IGNLABEL macro is put in
+ infront of the label, that statistic will not be included in the list
+ of statistics in the /proc filesystem */
+
+#define IGNLABEL(comment) NULL
+static char *statsLabels[] = {
+ "RxOverrun",
+ IGNLABEL("RxPlcpCrcErr"),
+ IGNLABEL("RxPlcpFormatErr"),
+ IGNLABEL("RxPlcpLengthErr"),
+ "RxMacCrcErr",
+ "RxMacCrcOk",
+ "RxWepErr",
+ "RxWepOk",
+ "RetryLong",
+ "RetryShort",
+ "MaxRetries",
+ "NoAck",
+ "NoCts",
+ "RxAck",
+ "RxCts",
+ "TxAck",
+ "TxRts",
+ "TxCts",
+ "TxMc",
+ "TxBc",
+ "TxUcFrags",
+ "TxUcPackets",
+ "TxBeacon",
+ "RxBeacon",
+ "TxSinColl",
+ "TxMulColl",
+ "DefersNo",
+ "DefersProt",
+ "DefersEngy",
+ "DupFram",
+ "RxFragDisc",
+ "TxAged",
+ "RxAged",
+ "LostSync-MaxRetry",
+ "LostSync-MissedBeacons",
+ "LostSync-ArlExceeded",
+ "LostSync-Deauth",
+ "LostSync-Disassoced",
+ "LostSync-TsfTiming",
+ "HostTxMc",
+ "HostTxBc",
+ "HostTxUc",
+ "HostTxFail",
+ "HostRxMc",
+ "HostRxBc",
+ "HostRxUc",
+ "HostRxDiscard",
+ IGNLABEL("HmacTxMc"),
+ IGNLABEL("HmacTxBc"),
+ IGNLABEL("HmacTxUc"),
+ IGNLABEL("HmacTxFail"),
+ IGNLABEL("HmacRxMc"),
+ IGNLABEL("HmacRxBc"),
+ IGNLABEL("HmacRxUc"),
+ IGNLABEL("HmacRxDiscard"),
+ IGNLABEL("HmacRxAccepted"),
+ "SsidMismatch",
+ "ApMismatch",
+ "RatesMismatch",
+ "AuthReject",
+ "AuthTimeout",
+ "AssocReject",
+ "AssocTimeout",
+ IGNLABEL("ReasonOutsideTable"),
+ IGNLABEL("ReasonStatus1"),
+ IGNLABEL("ReasonStatus2"),
+ IGNLABEL("ReasonStatus3"),
+ IGNLABEL("ReasonStatus4"),
+ IGNLABEL("ReasonStatus5"),
+ IGNLABEL("ReasonStatus6"),
+ IGNLABEL("ReasonStatus7"),
+ IGNLABEL("ReasonStatus8"),
+ IGNLABEL("ReasonStatus9"),
+ IGNLABEL("ReasonStatus10"),
+ IGNLABEL("ReasonStatus11"),
+ IGNLABEL("ReasonStatus12"),
+ IGNLABEL("ReasonStatus13"),
+ IGNLABEL("ReasonStatus14"),
+ IGNLABEL("ReasonStatus15"),
+ IGNLABEL("ReasonStatus16"),
+ IGNLABEL("ReasonStatus17"),
+ IGNLABEL("ReasonStatus18"),
+ IGNLABEL("ReasonStatus19"),
+ "RxMan",
+ "TxMan",
+ "RxRefresh",
+ "TxRefresh",
+ "RxPoll",
+ "TxPoll",
+ "HostRetries",
+ "LostSync-HostReq",
+ "HostTxBytes",
+ "HostRxBytes",
+ "ElapsedUsec",
+ "ElapsedSec",
+ "LostSyncBetterAP",
+ "PrivacyMismatch",
+ "Jammed",
+ "DiscRxNotWepped",
+ "PhyEleMismatch",
+ (char*)-1 };
+#ifndef RUN_AT
+#define RUN_AT(x) (jiffies+(x))
+#endif
+
+
+/* These variables are for insmod, since it seems that the rates
+ can only be set in setup_card. Rates should be a comma separated
+ (no spaces) list of rates (up to 8). */
+
+static int rates[8];
+static int basic_rate;
+static char *ssids[3];
+
+static int io[4];
+static int irq[4];
+
+static
+int maxencrypt /* = 0 */; /* The highest rate that the card can encrypt at.
+ 0 means no limit. For old cards this was 4 */
+
+static int auto_wep /* = 0 */; /* If set, it tries to figure out the wep mode */
+static int aux_bap /* = 0 */; /* Checks to see if the aux ports are needed to read
+ the bap, needed on some older cards and buses. */
+static int adhoc;
+
+static int probe = 1;
+
+static int proc_uid /* = 0 */;
+
+static int proc_gid /* = 0 */;
+
+static int airo_perm = 0555;
+
+static int proc_perm = 0644;
+
+MODULE_AUTHOR("Benjamin Reed");
+MODULE_DESCRIPTION("Support for Cisco/Aironet 802.11 wireless ethernet \
+ cards. Direct support for ISA/PCI/MPI cards and support \
+ for PCMCIA when used with airo_cs.");
+MODULE_LICENSE("Dual BSD/GPL");
+MODULE_SUPPORTED_DEVICE("Aironet 4500, 4800 and Cisco 340/350");
+module_param_array(io, int, NULL, 0);
+module_param_array(irq, int, NULL, 0);
+module_param(basic_rate, int, 0);
+module_param_array(rates, int, NULL, 0);
+module_param_array(ssids, charp, NULL, 0);
+module_param(auto_wep, int, 0);
+MODULE_PARM_DESC(auto_wep, "If non-zero, the driver will keep looping through \
+the authentication options until an association is made. The value of \
+auto_wep is number of the wep keys to check. A value of 2 will try using \
+the key at index 0 and index 1.");
+module_param(aux_bap, int, 0);
+MODULE_PARM_DESC(aux_bap, "If non-zero, the driver will switch into a mode \
+than seems to work better for older cards with some older buses. Before \
+switching it checks that the switch is needed.");
+module_param(maxencrypt, int, 0);
+MODULE_PARM_DESC(maxencrypt, "The maximum speed that the card can do \
+encryption. Units are in 512kbs. Zero (default) means there is no limit. \
+Older cards used to be limited to 2mbs (4).");
+module_param(adhoc, int, 0);
+MODULE_PARM_DESC(adhoc, "If non-zero, the card will start in adhoc mode.");
+module_param(probe, int, 0);
+MODULE_PARM_DESC(probe, "If zero, the driver won't start the card.");
+
+module_param(proc_uid, int, 0);
+MODULE_PARM_DESC(proc_uid, "The uid that the /proc files will belong to.");
+module_param(proc_gid, int, 0);
+MODULE_PARM_DESC(proc_gid, "The gid that the /proc files will belong to.");
+module_param(airo_perm, int, 0);
+MODULE_PARM_DESC(airo_perm, "The permission bits of /proc/[driver/]aironet.");
+module_param(proc_perm, int, 0);
+MODULE_PARM_DESC(proc_perm, "The permission bits of the files in /proc");
+
+/* This is a kind of sloppy hack to get this information to OUT4500 and
+ IN4500. I would be extremely interested in the situation where this
+ doesn't work though!!! */
+static int do8bitIO = 0;
+
+/* Return codes */
+#define SUCCESS 0
+#define ERROR -1
+#define NO_PACKET -2
+
+/* Commands */
+#define NOP2 0x0000
+#define MAC_ENABLE 0x0001
+#define MAC_DISABLE 0x0002
+#define CMD_LOSE_SYNC 0x0003 /* Not sure what this does... */
+#define CMD_SOFTRESET 0x0004
+#define HOSTSLEEP 0x0005
+#define CMD_MAGIC_PKT 0x0006
+#define CMD_SETWAKEMASK 0x0007
+#define CMD_READCFG 0x0008
+#define CMD_SETMODE 0x0009
+#define CMD_ALLOCATETX 0x000a
+#define CMD_TRANSMIT 0x000b
+#define CMD_DEALLOCATETX 0x000c
+#define NOP 0x0010
+#define CMD_WORKAROUND 0x0011
+#define CMD_ALLOCATEAUX 0x0020
+#define CMD_ACCESS 0x0021
+#define CMD_PCIBAP 0x0022
+#define CMD_PCIAUX 0x0023
+#define CMD_ALLOCBUF 0x0028
+#define CMD_GETTLV 0x0029
+#define CMD_PUTTLV 0x002a
+#define CMD_DELTLV 0x002b
+#define CMD_FINDNEXTTLV 0x002c
+#define CMD_PSPNODES 0x0030
+#define CMD_SETCW 0x0031
+#define CMD_SETPCF 0x0032
+#define CMD_SETPHYREG 0x003e
+#define CMD_TXTEST 0x003f
+#define MAC_ENABLETX 0x0101
+#define CMD_LISTBSS 0x0103
+#define CMD_SAVECFG 0x0108
+#define CMD_ENABLEAUX 0x0111
+#define CMD_WRITERID 0x0121
+#define CMD_USEPSPNODES 0x0130
+#define MAC_ENABLERX 0x0201
+
+/* Command errors */
+#define ERROR_QUALIF 0x00
+#define ERROR_ILLCMD 0x01
+#define ERROR_ILLFMT 0x02
+#define ERROR_INVFID 0x03
+#define ERROR_INVRID 0x04
+#define ERROR_LARGE 0x05
+#define ERROR_NDISABL 0x06
+#define ERROR_ALLOCBSY 0x07
+#define ERROR_NORD 0x0B
+#define ERROR_NOWR 0x0C
+#define ERROR_INVFIDTX 0x0D
+#define ERROR_TESTACT 0x0E
+#define ERROR_TAGNFND 0x12
+#define ERROR_DECODE 0x20
+#define ERROR_DESCUNAV 0x21
+#define ERROR_BADLEN 0x22
+#define ERROR_MODE 0x80
+#define ERROR_HOP 0x81
+#define ERROR_BINTER 0x82
+#define ERROR_RXMODE 0x83
+#define ERROR_MACADDR 0x84
+#define ERROR_RATES 0x85
+#define ERROR_ORDER 0x86
+#define ERROR_SCAN 0x87
+#define ERROR_AUTH 0x88
+#define ERROR_PSMODE 0x89
+#define ERROR_RTYPE 0x8A
+#define ERROR_DIVER 0x8B
+#define ERROR_SSID 0x8C
+#define ERROR_APLIST 0x8D
+#define ERROR_AUTOWAKE 0x8E
+#define ERROR_LEAP 0x8F
+
+/* Registers */
+#define COMMAND 0x00
+#define PARAM0 0x02
+#define PARAM1 0x04
+#define PARAM2 0x06
+#define STATUS 0x08
+#define RESP0 0x0a
+#define RESP1 0x0c
+#define RESP2 0x0e
+#define LINKSTAT 0x10
+#define SELECT0 0x18
+#define OFFSET0 0x1c
+#define RXFID 0x20
+#define TXALLOCFID 0x22
+#define TXCOMPLFID 0x24
+#define DATA0 0x36
+#define EVSTAT 0x30
+#define EVINTEN 0x32
+#define EVACK 0x34
+#define SWS0 0x28
+#define SWS1 0x2a
+#define SWS2 0x2c
+#define SWS3 0x2e
+#define AUXPAGE 0x3A
+#define AUXOFF 0x3C
+#define AUXDATA 0x3E
+
+#define FID_TX 1
+#define FID_RX 2
+/* Offset into aux memory for descriptors */
+#define AUX_OFFSET 0x800
+/* Size of allocated packets */
+#define PKTSIZE 1840
+#define RIDSIZE 2048
+/* Size of the transmit queue */
+#define MAXTXQ 64
+
+/* BAP selectors */
+#define BAP0 0 // Used for receiving packets
+#define BAP1 2 // Used for xmiting packets and working with RIDS
+
+/* Flags */
+#define COMMAND_BUSY 0x8000
+
+#define BAP_BUSY 0x8000
+#define BAP_ERR 0x4000
+#define BAP_DONE 0x2000
+
+#define PROMISC 0xffff
+#define NOPROMISC 0x0000
+
+#define EV_CMD 0x10
+#define EV_CLEARCOMMANDBUSY 0x4000
+#define EV_RX 0x01
+#define EV_TX 0x02
+#define EV_TXEXC 0x04
+#define EV_ALLOC 0x08
+#define EV_LINK 0x80
+#define EV_AWAKE 0x100
+#define EV_TXCPY 0x400
+#define EV_UNKNOWN 0x800
+#define EV_MIC 0x1000 /* Message Integrity Check Interrupt */
+#define EV_AWAKEN 0x2000
+#define STATUS_INTS (EV_AWAKE|EV_LINK|EV_TXEXC|EV_TX|EV_TXCPY|EV_RX|EV_MIC)
+
+#ifdef CHECK_UNKNOWN_INTS
+#define IGNORE_INTS ( EV_CMD | EV_UNKNOWN)
+#else
+#define IGNORE_INTS (~STATUS_INTS)
+#endif
+
+/* RID TYPES */
+#define RID_RW 0x20
+
+/* The RIDs */
+#define RID_CAPABILITIES 0xFF00
+#define RID_APINFO 0xFF01
+#define RID_RADIOINFO 0xFF02
+#define RID_UNKNOWN3 0xFF03
+#define RID_RSSI 0xFF04
+#define RID_CONFIG 0xFF10
+#define RID_SSID 0xFF11
+#define RID_APLIST 0xFF12
+#define RID_DRVNAME 0xFF13
+#define RID_ETHERENCAP 0xFF14
+#define RID_WEP_TEMP 0xFF15
+#define RID_WEP_PERM 0xFF16
+#define RID_MODULATION 0xFF17
+#define RID_OPTIONS 0xFF18
+#define RID_ACTUALCONFIG 0xFF20 /*readonly*/
+#define RID_FACTORYCONFIG 0xFF21
+#define RID_UNKNOWN22 0xFF22
+#define RID_LEAPUSERNAME 0xFF23
+#define RID_LEAPPASSWORD 0xFF24
+#define RID_STATUS 0xFF50
+#define RID_BEACON_HST 0xFF51
+#define RID_BUSY_HST 0xFF52
+#define RID_RETRIES_HST 0xFF53
+#define RID_UNKNOWN54 0xFF54
+#define RID_UNKNOWN55 0xFF55
+#define RID_UNKNOWN56 0xFF56
+#define RID_MIC 0xFF57
+#define RID_STATS16 0xFF60
+#define RID_STATS16DELTA 0xFF61
+#define RID_STATS16DELTACLEAR 0xFF62
+#define RID_STATS 0xFF68
+#define RID_STATSDELTA 0xFF69
+#define RID_STATSDELTACLEAR 0xFF6A
+#define RID_ECHOTEST_RID 0xFF70
+#define RID_ECHOTEST_RESULTS 0xFF71
+#define RID_BSSLISTFIRST 0xFF72
+#define RID_BSSLISTNEXT 0xFF73
+
+typedef struct {
+ u16 cmd;
+ u16 parm0;
+ u16 parm1;
+ u16 parm2;
+} Cmd;
+
+typedef struct {
+ u16 status;
+ u16 rsp0;
+ u16 rsp1;
+ u16 rsp2;
+} Resp;
+
+/*
+ * Rids and endian-ness: The Rids will always be in cpu endian, since
+ * this all the patches from the big-endian guys end up doing that.
+ * so all rid access should use the read/writeXXXRid routines.
+ */
+
+/* This is redundant for x86 archs, but it seems necessary for ARM */
+#pragma pack(1)
+
+/* This structure came from an email sent to me from an engineer at
+ aironet for inclusion into this driver */
+typedef struct {
+ u16 len;
+ u16 kindex;
+ u8 mac[ETH_ALEN];
+ u16 klen;
+ u8 key[16];
+} WepKeyRid;
+
+/* These structures are from the Aironet's PC4500 Developers Manual */
+typedef struct {
+ u16 len;
+ u8 ssid[32];
+} Ssid;
+
+typedef struct {
+ u16 len;
+ Ssid ssids[3];
+} SsidRid;
+
+typedef struct {
+ u16 len;
+ u16 modulation;
+#define MOD_DEFAULT 0
+#define MOD_CCK 1
+#define MOD_MOK 2
+} ModulationRid;
+
+typedef struct {
+ u16 len; /* sizeof(ConfigRid) */
+ u16 opmode; /* operating mode */
+#define MODE_STA_IBSS 0
+#define MODE_STA_ESS 1
+#define MODE_AP 2
+#define MODE_AP_RPTR 3
+#define MODE_ETHERNET_HOST (0<<8) /* rx payloads converted */
+#define MODE_LLC_HOST (1<<8) /* rx payloads left as is */
+#define MODE_AIRONET_EXTEND (1<<9) /* enable Aironet extenstions */
+#define MODE_AP_INTERFACE (1<<10) /* enable ap interface extensions */
+#define MODE_ANTENNA_ALIGN (1<<11) /* enable antenna alignment */
+#define MODE_ETHER_LLC (1<<12) /* enable ethernet LLC */
+#define MODE_LEAF_NODE (1<<13) /* enable leaf node bridge */
+#define MODE_CF_POLLABLE (1<<14) /* enable CF pollable */
+#define MODE_MIC (1<<15) /* enable MIC */
+ u16 rmode; /* receive mode */
+#define RXMODE_BC_MC_ADDR 0
+#define RXMODE_BC_ADDR 1 /* ignore multicasts */
+#define RXMODE_ADDR 2 /* ignore multicast and broadcast */
+#define RXMODE_RFMON 3 /* wireless monitor mode */
+#define RXMODE_RFMON_ANYBSS 4
+#define RXMODE_LANMON 5 /* lan style monitor -- data packets only */
+#define RXMODE_DISABLE_802_3_HEADER (1<<8) /* disables 802.3 header on rx */
+#define RXMODE_NORMALIZED_RSSI (1<<9) /* return normalized RSSI */
+ u16 fragThresh;
+ u16 rtsThres;
+ u8 macAddr[ETH_ALEN];
+ u8 rates[8];
+ u16 shortRetryLimit;
+ u16 longRetryLimit;
+ u16 txLifetime; /* in kusec */
+ u16 rxLifetime; /* in kusec */
+ u16 stationary;
+ u16 ordering;
+ u16 u16deviceType; /* for overriding device type */
+ u16 cfpRate;
+ u16 cfpDuration;
+ u16 _reserved1[3];
+ /*---------- Scanning/Associating ----------*/
+ u16 scanMode;
+#define SCANMODE_ACTIVE 0
+#define SCANMODE_PASSIVE 1
+#define SCANMODE_AIROSCAN 2
+ u16 probeDelay; /* in kusec */
+ u16 probeEnergyTimeout; /* in kusec */
+ u16 probeResponseTimeout;
+ u16 beaconListenTimeout;
+ u16 joinNetTimeout;
+ u16 authTimeout;
+ u16 authType;
+#define AUTH_OPEN 0x1
+#define AUTH_ENCRYPT 0x101
+#define AUTH_SHAREDKEY 0x102
+#define AUTH_ALLOW_UNENCRYPTED 0x200
+ u16 associationTimeout;
+ u16 specifiedApTimeout;
+ u16 offlineScanInterval;
+ u16 offlineScanDuration;
+ u16 linkLossDelay;
+ u16 maxBeaconLostTime;
+ u16 refreshInterval;
+#define DISABLE_REFRESH 0xFFFF
+ u16 _reserved1a[1];
+ /*---------- Power save operation ----------*/
+ u16 powerSaveMode;
+#define POWERSAVE_CAM 0
+#define POWERSAVE_PSP 1
+#define POWERSAVE_PSPCAM 2
+ u16 sleepForDtims;
+ u16 listenInterval;
+ u16 fastListenInterval;
+ u16 listenDecay;
+ u16 fastListenDelay;
+ u16 _reserved2[2];
+ /*---------- Ap/Ibss config items ----------*/
+ u16 beaconPeriod;
+ u16 atimDuration;
+ u16 hopPeriod;
+ u16 channelSet;
+ u16 channel;
+ u16 dtimPeriod;
+ u16 bridgeDistance;
+ u16 radioID;
+ /*---------- Radio configuration ----------*/
+ u16 radioType;
+#define RADIOTYPE_DEFAULT 0
+#define RADIOTYPE_802_11 1
+#define RADIOTYPE_LEGACY 2
+ u8 rxDiversity;
+ u8 txDiversity;
+ u16 txPower;
+#define TXPOWER_DEFAULT 0
+ u16 rssiThreshold;
+#define RSSI_DEFAULT 0
+ u16 modulation;
+#define PREAMBLE_AUTO 0
+#define PREAMBLE_LONG 1
+#define PREAMBLE_SHORT 2
+ u16 preamble;
+ u16 homeProduct;
+ u16 radioSpecific;
+ /*---------- Aironet Extensions ----------*/
+ u8 nodeName[16];
+ u16 arlThreshold;
+ u16 arlDecay;
+ u16 arlDelay;
+ u16 _reserved4[1];
+ /*---------- Aironet Extensions ----------*/
+ u8 magicAction;
+#define MAGIC_ACTION_STSCHG 1
+#define MAGIC_ACTION_RESUME 2
+#define MAGIC_IGNORE_MCAST (1<<8)
+#define MAGIC_IGNORE_BCAST (1<<9)
+#define MAGIC_SWITCH_TO_PSP (0<<10)
+#define MAGIC_STAY_IN_CAM (1<<10)
+ u8 magicControl;
+ u16 autoWake;
+} ConfigRid;
+
+typedef struct {
+ u16 len;
+ u8 mac[ETH_ALEN];
+ u16 mode;
+ u16 errorCode;
+ u16 sigQuality;
+ u16 SSIDlen;
+ char SSID[32];
+ char apName[16];
+ u8 bssid[4][ETH_ALEN];
+ u16 beaconPeriod;
+ u16 dimPeriod;
+ u16 atimDuration;
+ u16 hopPeriod;
+ u16 channelSet;
+ u16 channel;
+ u16 hopsToBackbone;
+ u16 apTotalLoad;
+ u16 generatedLoad;
+ u16 accumulatedArl;
+ u16 signalQuality;
+ u16 currentXmitRate;
+ u16 apDevExtensions;
+ u16 normalizedSignalStrength;
+ u16 shortPreamble;
+ u8 apIP[4];
+ u8 noisePercent; /* Noise percent in last second */
+ u8 noisedBm; /* Noise dBm in last second */
+ u8 noiseAvePercent; /* Noise percent in last minute */
+ u8 noiseAvedBm; /* Noise dBm in last minute */
+ u8 noiseMaxPercent; /* Highest noise percent in last minute */
+ u8 noiseMaxdBm; /* Highest noise dbm in last minute */
+ u16 load;
+ u8 carrier[4];
+ u16 assocStatus;
+#define STAT_NOPACKETS 0
+#define STAT_NOCARRIERSET 10
+#define STAT_GOTCARRIERSET 11
+#define STAT_WRONGSSID 20
+#define STAT_BADCHANNEL 25
+#define STAT_BADBITRATES 30
+#define STAT_BADPRIVACY 35
+#define STAT_APFOUND 40
+#define STAT_APREJECTED 50
+#define STAT_AUTHENTICATING 60
+#define STAT_DEAUTHENTICATED 61
+#define STAT_AUTHTIMEOUT 62
+#define STAT_ASSOCIATING 70
+#define STAT_DEASSOCIATED 71
+#define STAT_ASSOCTIMEOUT 72
+#define STAT_NOTAIROAP 73
+#define STAT_ASSOCIATED 80
+#define STAT_LEAPING 90
+#define STAT_LEAPFAILED 91
+#define STAT_LEAPTIMEDOUT 92
+#define STAT_LEAPCOMPLETE 93
+} StatusRid;
+
+typedef struct {
+ u16 len;
+ u16 spacer;
+ u32 vals[100];
+} StatsRid;
+
+
+typedef struct {
+ u16 len;
+ u8 ap[4][ETH_ALEN];
+} APListRid;
+
+typedef struct {
+ u16 len;
+ char oui[3];
+ char zero;
+ u16 prodNum;
+ char manName[32];
+ char prodName[16];
+ char prodVer[8];
+ char factoryAddr[ETH_ALEN];
+ char aironetAddr[ETH_ALEN];
+ u16 radioType;
+ u16 country;
+ char callid[ETH_ALEN];
+ char supportedRates[8];
+ char rxDiversity;
+ char txDiversity;
+ u16 txPowerLevels[8];
+ u16 hardVer;
+ u16 hardCap;
+ u16 tempRange;
+ u16 softVer;
+ u16 softSubVer;
+ u16 interfaceVer;
+ u16 softCap;
+ u16 bootBlockVer;
+ u16 requiredHard;
+ u16 extSoftCap;
+} CapabilityRid;
+
+typedef struct {
+ u16 len;
+ u16 index; /* First is 0 and 0xffff means end of list */
+#define RADIO_FH 1 /* Frequency hopping radio type */
+#define RADIO_DS 2 /* Direct sequence radio type */
+#define RADIO_TMA 4 /* Proprietary radio used in old cards (2500) */
+ u16 radioType;
+ u8 bssid[ETH_ALEN]; /* Mac address of the BSS */
+ u8 zero;
+ u8 ssidLen;
+ u8 ssid[32];
+ u16 rssi;
+#define CAP_ESS (1<<0)
+#define CAP_IBSS (1<<1)
+#define CAP_PRIVACY (1<<4)
+#define CAP_SHORTHDR (1<<5)
+ u16 cap;
+ u16 beaconInterval;
+ u8 rates[8]; /* Same as rates for config rid */
+ struct { /* For frequency hopping only */
+ u16 dwell;
+ u8 hopSet;
+ u8 hopPattern;
+ u8 hopIndex;
+ u8 fill;
+ } fh;
+ u16 dsChannel;
+ u16 atimWindow;
+} BSSListRid;
+
+typedef struct {
+ u8 rssipct;
+ u8 rssidBm;
+} tdsRssiEntry;
+
+typedef struct {
+ u16 len;
+ tdsRssiEntry x[256];
+} tdsRssiRid;
+
+typedef struct {
+ u16 len;
+ u16 state;
+ u16 multicastValid;
+ u8 multicast[16];
+ u16 unicastValid;
+ u8 unicast[16];
+} MICRid;
+
+typedef struct {
+ u16 typelen;
+
+ union {
+ u8 snap[8];
+ struct {
+ u8 dsap;
+ u8 ssap;
+ u8 control;
+ u8 orgcode[3];
+ u8 fieldtype[2];
+ } llc;
+ } u;
+ u32 mic;
+ u32 seq;
+} MICBuffer;
+
+typedef struct {
+ u8 da[ETH_ALEN];
+ u8 sa[ETH_ALEN];
+} etherHead;
+
+#pragma pack()
+
+#define TXCTL_TXOK (1<<1) /* report if tx is ok */
+#define TXCTL_TXEX (1<<2) /* report if tx fails */
+#define TXCTL_802_3 (0<<3) /* 802.3 packet */
+#define TXCTL_802_11 (1<<3) /* 802.11 mac packet */
+#define TXCTL_ETHERNET (0<<4) /* payload has ethertype */
+#define TXCTL_LLC (1<<4) /* payload is llc */
+#define TXCTL_RELEASE (0<<5) /* release after completion */
+#define TXCTL_NORELEASE (1<<5) /* on completion returns to host */
+
+#define BUSY_FID 0x10000
+
+#ifdef CISCO_EXT
+#define AIROMAGIC 0xa55a
+/* Warning : SIOCDEVPRIVATE may disapear during 2.5.X - Jean II */
+#ifdef SIOCIWFIRSTPRIV
+#ifdef SIOCDEVPRIVATE
+#define AIROOLDIOCTL SIOCDEVPRIVATE
+#define AIROOLDIDIFC AIROOLDIOCTL + 1
+#endif /* SIOCDEVPRIVATE */
+#else /* SIOCIWFIRSTPRIV */
+#define SIOCIWFIRSTPRIV SIOCDEVPRIVATE
+#endif /* SIOCIWFIRSTPRIV */
+/* This may be wrong. When using the new SIOCIWFIRSTPRIV range, we probably
+ * should use only "GET" ioctls (last bit set to 1). "SET" ioctls are root
+ * only and don't return the modified struct ifreq to the application which
+ * is usually a problem. - Jean II */
+#define AIROIOCTL SIOCIWFIRSTPRIV
+#define AIROIDIFC AIROIOCTL + 1
+
+/* Ioctl constants to be used in airo_ioctl.command */
+
+#define AIROGCAP 0 // Capability rid
+#define AIROGCFG 1 // USED A LOT
+#define AIROGSLIST 2 // System ID list
+#define AIROGVLIST 3 // List of specified AP's
+#define AIROGDRVNAM 4 // NOTUSED
+#define AIROGEHTENC 5 // NOTUSED
+#define AIROGWEPKTMP 6
+#define AIROGWEPKNV 7
+#define AIROGSTAT 8
+#define AIROGSTATSC32 9
+#define AIROGSTATSD32 10
+#define AIROGMICRID 11
+#define AIROGMICSTATS 12
+#define AIROGFLAGS 13
+#define AIROGID 14
+#define AIRORRID 15
+#define AIRORSWVERSION 17
+
+/* Leave gap of 40 commands after AIROGSTATSD32 for future */
+
+#define AIROPCAP AIROGSTATSD32 + 40
+#define AIROPVLIST AIROPCAP + 1
+#define AIROPSLIST AIROPVLIST + 1
+#define AIROPCFG AIROPSLIST + 1
+#define AIROPSIDS AIROPCFG + 1
+#define AIROPAPLIST AIROPSIDS + 1
+#define AIROPMACON AIROPAPLIST + 1 /* Enable mac */
+#define AIROPMACOFF AIROPMACON + 1 /* Disable mac */
+#define AIROPSTCLR AIROPMACOFF + 1
+#define AIROPWEPKEY AIROPSTCLR + 1
+#define AIROPWEPKEYNV AIROPWEPKEY + 1
+#define AIROPLEAPPWD AIROPWEPKEYNV + 1
+#define AIROPLEAPUSR AIROPLEAPPWD + 1
+
+/* Flash codes */
+
+#define AIROFLSHRST AIROPWEPKEYNV + 40
+#define AIROFLSHGCHR AIROFLSHRST + 1
+#define AIROFLSHSTFL AIROFLSHGCHR + 1
+#define AIROFLSHPCHR AIROFLSHSTFL + 1
+#define AIROFLPUTBUF AIROFLSHPCHR + 1
+#define AIRORESTART AIROFLPUTBUF + 1
+
+#define FLASHSIZE 32768
+#define AUXMEMSIZE (256 * 1024)
+
+typedef struct aironet_ioctl {
+ unsigned short command; // What to do
+ unsigned short len; // Len of data
+ unsigned short ridnum; // rid number
+ unsigned char __user *data; // d-data
+} aironet_ioctl;
+
+static char *swversion = "2.1";
+#endif /* CISCO_EXT */
+
+#define NUM_MODULES 2
+#define MIC_MSGLEN_MAX 2400
+#define EMMH32_MSGLEN_MAX MIC_MSGLEN_MAX
+
+typedef struct {
+ u32 size; // size
+ u8 enabled; // MIC enabled or not
+ u32 rxSuccess; // successful packets received
+ u32 rxIncorrectMIC; // pkts dropped due to incorrect MIC comparison
+ u32 rxNotMICed; // pkts dropped due to not being MIC'd
+ u32 rxMICPlummed; // pkts dropped due to not having a MIC plummed
+ u32 rxWrongSequence; // pkts dropped due to sequence number violation
+ u32 reserve[32];
+} mic_statistics;
+
+typedef struct {
+ u32 coeff[((EMMH32_MSGLEN_MAX)+3)>>2];
+ u64 accum; // accumulated mic, reduced to u32 in final()
+ int position; // current position (byte offset) in message
+ union {
+ u8 d8[4];
+ u32 d32;
+ } part; // saves partial message word across update() calls
+} emmh32_context;
+
+typedef struct {
+ emmh32_context seed; // Context - the seed
+ u32 rx; // Received sequence number
+ u32 tx; // Tx sequence number
+ u32 window; // Start of window
+ u8 valid; // Flag to say if context is valid or not
+ u8 key[16];
+} miccntx;
+
+typedef struct {
+ miccntx mCtx; // Multicast context
+ miccntx uCtx; // Unicast context
+} mic_module;
+
+typedef struct {
+ unsigned int rid: 16;
+ unsigned int len: 15;
+ unsigned int valid: 1;
+ dma_addr_t host_addr;
+} Rid;
+
+typedef struct {
+ unsigned int offset: 15;
+ unsigned int eoc: 1;
+ unsigned int len: 15;
+ unsigned int valid: 1;
+ dma_addr_t host_addr;
+} TxFid;
+
+typedef struct {
+ unsigned int ctl: 15;
+ unsigned int rdy: 1;
+ unsigned int len: 15;
+ unsigned int valid: 1;
+ dma_addr_t host_addr;
+} RxFid;
+
+/*
+ * Host receive descriptor
+ */
+typedef struct {
+ unsigned char __iomem *card_ram_off; /* offset into card memory of the
+ desc */
+ RxFid rx_desc; /* card receive descriptor */
+ char *virtual_host_addr; /* virtual address of host receive
+ buffer */
+ int pending;
+} HostRxDesc;
+
+/*
+ * Host transmit descriptor
+ */
+typedef struct {
+ unsigned char __iomem *card_ram_off; /* offset into card memory of the
+ desc */
+ TxFid tx_desc; /* card transmit descriptor */
+ char *virtual_host_addr; /* virtual address of host receive
+ buffer */
+ int pending;
+} HostTxDesc;
+
+/*
+ * Host RID descriptor
+ */
+typedef struct {
+ unsigned char __iomem *card_ram_off; /* offset into card memory of the
+ descriptor */
+ Rid rid_desc; /* card RID descriptor */
+ char *virtual_host_addr; /* virtual address of host receive
+ buffer */
+} HostRidDesc;
+
+typedef struct {
+ u16 sw0;
+ u16 sw1;
+ u16 status;
+ u16 len;
+#define HOST_SET (1 << 0)
+#define HOST_INT_TX (1 << 1) /* Interrupt on successful TX */
+#define HOST_INT_TXERR (1 << 2) /* Interrupt on unseccessful TX */
+#define HOST_LCC_PAYLOAD (1 << 4) /* LLC payload, 0 = Ethertype */
+#define HOST_DONT_RLSE (1 << 5) /* Don't release buffer when done */
+#define HOST_DONT_RETRY (1 << 6) /* Don't retry trasmit */
+#define HOST_CLR_AID (1 << 7) /* clear AID failure */
+#define HOST_RTS (1 << 9) /* Force RTS use */
+#define HOST_SHORT (1 << 10) /* Do short preamble */
+ u16 ctl;
+ u16 aid;
+ u16 retries;
+ u16 fill;
+} TxCtlHdr;
+
+typedef struct {
+ u16 ctl;
+ u16 duration;
+ char addr1[6];
+ char addr2[6];
+ char addr3[6];
+ u16 seq;
+ char addr4[6];
+} WifiHdr;
+
+
+typedef struct {
+ TxCtlHdr ctlhdr;
+ u16 fill1;
+ u16 fill2;
+ WifiHdr wifihdr;
+ u16 gaplen;
+ u16 status;
+} WifiCtlHdr;
+
+WifiCtlHdr wifictlhdr8023 = {
+ .ctlhdr = {
+ .ctl = HOST_DONT_RLSE,
+ }
+};
+
+#ifdef WIRELESS_EXT
+// Frequency list (map channels to frequencies)
+static const long frequency_list[] = { 2412, 2417, 2422, 2427, 2432, 2437, 2442,
+ 2447, 2452, 2457, 2462, 2467, 2472, 2484 };
+
+// A few details needed for WEP (Wireless Equivalent Privacy)
+#define MAX_KEY_SIZE 13 // 128 (?) bits
+#define MIN_KEY_SIZE 5 // 40 bits RC4 - WEP
+typedef struct wep_key_t {
+ u16 len;
+ u8 key[16]; /* 40-bit and 104-bit keys */
+} wep_key_t;
+
+/* Backward compatibility */
+#ifndef IW_ENCODE_NOKEY
+#define IW_ENCODE_NOKEY 0x0800 /* Key is write only, so not present */
+#define IW_ENCODE_MODE (IW_ENCODE_DISABLED | IW_ENCODE_RESTRICTED | IW_ENCODE_OPEN)
+#endif /* IW_ENCODE_NOKEY */
+
+/* List of Wireless Handlers (new API) */
+static const struct iw_handler_def airo_handler_def;
+#endif /* WIRELESS_EXT */
+
+static const char version[] = "airo.c 0.6 (Ben Reed & Javier Achirica)";
+
+struct airo_info;
+
+static int get_dec_u16( char *buffer, int *start, int limit );
+static void OUT4500( struct airo_info *, u16 register, u16 value );
+static unsigned short IN4500( struct airo_info *, u16 register );
+static u16 setup_card(struct airo_info*, u8 *mac, int lock);
+static int enable_MAC( struct airo_info *ai, Resp *rsp, int lock );
+static void disable_MAC(struct airo_info *ai, int lock);
+static void enable_interrupts(struct airo_info*);
+static void disable_interrupts(struct airo_info*);
+static u16 issuecommand(struct airo_info*, Cmd *pCmd, Resp *pRsp);
+static int bap_setup(struct airo_info*, u16 rid, u16 offset, int whichbap);
+static int aux_bap_read(struct airo_info*, u16 *pu16Dst, int bytelen,
+ int whichbap);
+static int fast_bap_read(struct airo_info*, u16 *pu16Dst, int bytelen,
+ int whichbap);
+static int bap_write(struct airo_info*, const u16 *pu16Src, int bytelen,
+ int whichbap);
+static int PC4500_accessrid(struct airo_info*, u16 rid, u16 accmd);
+static int PC4500_readrid(struct airo_info*, u16 rid, void *pBuf, int len, int lock);
+static int PC4500_writerid(struct airo_info*, u16 rid, const void
+ *pBuf, int len, int lock);
+static int do_writerid( struct airo_info*, u16 rid, const void *rid_data,
+ int len, int dummy );
+static u16 transmit_allocate(struct airo_info*, int lenPayload, int raw);
+static int transmit_802_3_packet(struct airo_info*, int len, char *pPacket);
+static int transmit_802_11_packet(struct airo_info*, int len, char *pPacket);
+
+static int mpi_send_packet (struct net_device *dev);
+static void mpi_unmap_card(struct pci_dev *pci);
+static void mpi_receive_802_3(struct airo_info *ai);
+static void mpi_receive_802_11(struct airo_info *ai);
+static int waitbusy (struct airo_info *ai);
+
+static irqreturn_t airo_interrupt( int irq, void* dev_id, struct pt_regs
+ *regs);
+static int airo_thread(void *data);
+static void timer_func( struct net_device *dev );
+static int airo_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
+#ifdef WIRELESS_EXT
+struct iw_statistics *airo_get_wireless_stats (struct net_device *dev);
+static void airo_read_wireless_stats (struct airo_info *local);
+#endif /* WIRELESS_EXT */
+#ifdef CISCO_EXT
+static int readrids(struct net_device *dev, aironet_ioctl *comp);
+static int writerids(struct net_device *dev, aironet_ioctl *comp);
+int flashcard(struct net_device *dev, aironet_ioctl *comp);
+#endif /* CISCO_EXT */
+#ifdef MICSUPPORT
+static void micinit(struct airo_info *ai);
+static int micsetup(struct airo_info *ai);
+static int encapsulate(struct airo_info *ai, etherHead *pPacket, MICBuffer *buffer, int len);
+static int decapsulate(struct airo_info *ai, MICBuffer *mic, etherHead *pPacket, u16 payLen);
+
+#include <linux/crypto.h>
+#endif
+
+struct airo_info {
+ struct net_device_stats stats;
+ struct net_device *dev;
+ /* Note, we can have MAX_FIDS outstanding. FIDs are 16-bits, so we
+ use the high bit to mark whether it is in use. */
+#define MAX_FIDS 6
+#define MPI_MAX_FIDS 1
+ int fids[MAX_FIDS];
+ ConfigRid config;
+ char keyindex; // Used with auto wep
+ char defindex; // Used with auto wep
+ struct proc_dir_entry *proc_entry;
+ spinlock_t aux_lock;
+ unsigned long flags;
+#define FLAG_PROMISC 8 /* IFF_PROMISC 0x100 - include/linux/if.h */
+#define FLAG_RADIO_OFF 0 /* User disabling of MAC */
+#define FLAG_RADIO_DOWN 1 /* ifup/ifdown disabling of MAC */
+#define FLAG_RADIO_MASK 0x03
+#define FLAG_ENABLED 2
+#define FLAG_ADHOC 3 /* Needed by MIC */
+#define FLAG_MIC_CAPABLE 4
+#define FLAG_UPDATE_MULTI 5
+#define FLAG_UPDATE_UNI 6
+#define FLAG_802_11 7
+#define FLAG_PENDING_XMIT 9
+#define FLAG_PENDING_XMIT11 10
+#define FLAG_MPI 11
+#define FLAG_REGISTERED 12
+#define FLAG_COMMIT 13
+#define FLAG_RESET 14
+#define FLAG_FLASHING 15
+#define JOB_MASK 0x1ff0000
+#define JOB_DIE 16
+#define JOB_XMIT 17
+#define JOB_XMIT11 18
+#define JOB_STATS 19
+#define JOB_PROMISC 20
+#define JOB_MIC 21
+#define JOB_EVENT 22
+#define JOB_AUTOWEP 23
+#define JOB_WSTATS 24
+ int (*bap_read)(struct airo_info*, u16 *pu16Dst, int bytelen,
+ int whichbap);
+ unsigned short *flash;
+ tdsRssiEntry *rssi;
+ struct task_struct *task;
+ struct semaphore sem;
+ pid_t thr_pid;
+ wait_queue_head_t thr_wait;
+ struct completion thr_exited;
+ unsigned long expires;
+ struct {
+ struct sk_buff *skb;
+ int fid;
+ } xmit, xmit11;
+ struct net_device *wifidev;
+#ifdef WIRELESS_EXT
+ struct iw_statistics wstats; // wireless stats
+ unsigned long scan_timestamp; /* Time started to scan */
+ struct iw_spy_data spy_data;
+ struct iw_public_data wireless_data;
+#endif /* WIRELESS_EXT */
+#ifdef MICSUPPORT
+ /* MIC stuff */
+ struct crypto_tfm *tfm;
+ mic_module mod[2];
+ mic_statistics micstats;
+#endif
+ HostRxDesc rxfids[MPI_MAX_FIDS]; // rx/tx/config MPI350 descriptors
+ HostTxDesc txfids[MPI_MAX_FIDS];
+ HostRidDesc config_desc;
+ unsigned long ridbus; // phys addr of config_desc
+ struct sk_buff_head txq;// tx queue used by mpi350 code
+ struct pci_dev *pci;
+ unsigned char __iomem *pcimem;
+ unsigned char __iomem *pciaux;
+ unsigned char *shared;
+ dma_addr_t shared_dma;
+ int power;
+ SsidRid *SSID;
+ APListRid *APList;
+#define PCI_SHARED_LEN 2*MPI_MAX_FIDS*PKTSIZE+RIDSIZE
+ char proc_name[IFNAMSIZ];
+};
+
+static inline int bap_read(struct airo_info *ai, u16 *pu16Dst, int bytelen,
+ int whichbap) {
+ return ai->bap_read(ai, pu16Dst, bytelen, whichbap);
+}
+
+static int setup_proc_entry( struct net_device *dev,
+ struct airo_info *apriv );
+static int takedown_proc_entry( struct net_device *dev,
+ struct airo_info *apriv );
+
+#ifdef MICSUPPORT
+/***********************************************************************
+ * MIC ROUTINES *
+ ***********************************************************************
+ */
+
+static int RxSeqValid (struct airo_info *ai,miccntx *context,int mcast,u32 micSeq);
+static void MoveWindow(miccntx *context, u32 micSeq);
+void emmh32_setseed(emmh32_context *context, u8 *pkey, int keylen, struct crypto_tfm *);
+void emmh32_init(emmh32_context *context);
+void emmh32_update(emmh32_context *context, u8 *pOctets, int len);
+void emmh32_final(emmh32_context *context, u8 digest[4]);
+
+/* micinit - Initialize mic seed */
+
+static void micinit(struct airo_info *ai)
+{
+ MICRid mic_rid;
+
+ clear_bit(JOB_MIC, &ai->flags);
+ PC4500_readrid(ai, RID_MIC, &mic_rid, sizeof(mic_rid), 0);
+ up(&ai->sem);
+
+ ai->micstats.enabled = (mic_rid.state & 0x00FF) ? 1 : 0;
+
+ if (ai->micstats.enabled) {
+ /* Key must be valid and different */
+ if (mic_rid.multicastValid && (!ai->mod[0].mCtx.valid ||
+ (memcmp (ai->mod[0].mCtx.key, mic_rid.multicast,
+ sizeof(ai->mod[0].mCtx.key)) != 0))) {
+ /* Age current mic Context */
+ memcpy(&ai->mod[1].mCtx,&ai->mod[0].mCtx,sizeof(miccntx));
+ /* Initialize new context */
+ memcpy(&ai->mod[0].mCtx.key,mic_rid.multicast,sizeof(mic_rid.multicast));
+ ai->mod[0].mCtx.window = 33; //Window always points to the middle
+ ai->mod[0].mCtx.rx = 0; //Rx Sequence numbers
+ ai->mod[0].mCtx.tx = 0; //Tx sequence numbers
+ ai->mod[0].mCtx.valid = 1; //Key is now valid
+
+ /* Give key to mic seed */
+ emmh32_setseed(&ai->mod[0].mCtx.seed,mic_rid.multicast,sizeof(mic_rid.multicast), ai->tfm);
+ }
+
+ /* Key must be valid and different */
+ if (mic_rid.unicastValid && (!ai->mod[0].uCtx.valid ||
+ (memcmp(ai->mod[0].uCtx.key, mic_rid.unicast,
+ sizeof(ai->mod[0].uCtx.key)) != 0))) {
+ /* Age current mic Context */
+ memcpy(&ai->mod[1].uCtx,&ai->mod[0].uCtx,sizeof(miccntx));
+ /* Initialize new context */
+ memcpy(&ai->mod[0].uCtx.key,mic_rid.unicast,sizeof(mic_rid.unicast));
+
+ ai->mod[0].uCtx.window = 33; //Window always points to the middle
+ ai->mod[0].uCtx.rx = 0; //Rx Sequence numbers
+ ai->mod[0].uCtx.tx = 0; //Tx sequence numbers
+ ai->mod[0].uCtx.valid = 1; //Key is now valid
+
+ //Give key to mic seed
+ emmh32_setseed(&ai->mod[0].uCtx.seed, mic_rid.unicast, sizeof(mic_rid.unicast), ai->tfm);
+ }
+ } else {
+ /* So next time we have a valid key and mic is enabled, we will update
+ * the sequence number if the key is the same as before.
+ */
+ ai->mod[0].uCtx.valid = 0;
+ ai->mod[0].mCtx.valid = 0;
+ }
+}
+
+/* micsetup - Get ready for business */
+
+static int micsetup(struct airo_info *ai) {
+ int i;
+
+ if (ai->tfm == NULL)
+ ai->tfm = crypto_alloc_tfm("aes", 0);
+
+ if (ai->tfm == NULL) {
+ printk(KERN_ERR "airo: failed to load transform for AES\n");
+ return ERROR;
+ }
+
+ for (i=0; i < NUM_MODULES; i++) {
+ memset(&ai->mod[i].mCtx,0,sizeof(miccntx));
+ memset(&ai->mod[i].uCtx,0,sizeof(miccntx));
+ }
+ return SUCCESS;
+}
+
+char micsnap[]= {0xAA,0xAA,0x03,0x00,0x40,0x96,0x00,0x02};
+
+/*===========================================================================
+ * Description: Mic a packet
+ *
+ * Inputs: etherHead * pointer to an 802.3 frame
+ *
+ * Returns: BOOLEAN if successful, otherwise false.
+ * PacketTxLen will be updated with the mic'd packets size.
+ *
+ * Caveats: It is assumed that the frame buffer will already
+ * be big enough to hold the largets mic message possible.
+ * (No memory allocation is done here).
+ *
+ * Author: sbraneky (10/15/01)
+ * Merciless hacks by rwilcher (1/14/02)
+ */
+
+static int encapsulate(struct airo_info *ai ,etherHead *frame, MICBuffer *mic, int payLen)
+{
+ miccntx *context;
+
+ // Determine correct context
+ // If not adhoc, always use unicast key
+
+ if (test_bit(FLAG_ADHOC, &ai->flags) && (frame->da[0] & 0x1))
+ context = &ai->mod[0].mCtx;
+ else
+ context = &ai->mod[0].uCtx;
+
+ if (!context->valid)
+ return ERROR;
+
+ mic->typelen = htons(payLen + 16); //Length of Mic'd packet
+
+ memcpy(&mic->u.snap, micsnap, sizeof(micsnap)); // Add Snap
+
+ // Add Tx sequence
+ mic->seq = htonl(context->tx);
+ context->tx += 2;
+
+ emmh32_init(&context->seed); // Mic the packet
+ emmh32_update(&context->seed,frame->da,ETH_ALEN * 2); // DA,SA
+ emmh32_update(&context->seed,(u8*)&mic->typelen,10); // Type/Length and Snap
+ emmh32_update(&context->seed,(u8*)&mic->seq,sizeof(mic->seq)); //SEQ
+ emmh32_update(&context->seed,frame->da + ETH_ALEN * 2,payLen); //payload
+ emmh32_final(&context->seed, (u8*)&mic->mic);
+
+ /* New Type/length ?????????? */
+ mic->typelen = 0; //Let NIC know it could be an oversized packet
+ return SUCCESS;
+}
+
+typedef enum {
+ NONE,
+ NOMIC,
+ NOMICPLUMMED,
+ SEQUENCE,
+ INCORRECTMIC,
+} mic_error;
+
+/*===========================================================================
+ * Description: Decapsulates a MIC'd packet and returns the 802.3 packet
+ * (removes the MIC stuff) if packet is a valid packet.
+ *
+ * Inputs: etherHead pointer to the 802.3 packet
+ *
+ * Returns: BOOLEAN - TRUE if packet should be dropped otherwise FALSE
+ *
+ * Author: sbraneky (10/15/01)
+ * Merciless hacks by rwilcher (1/14/02)
+ *---------------------------------------------------------------------------
+ */
+
+static int decapsulate(struct airo_info *ai, MICBuffer *mic, etherHead *eth, u16 payLen)
+{
+ int i;
+ u32 micSEQ;
+ miccntx *context;
+ u8 digest[4];
+ mic_error micError = NONE;
+
+ // Check if the packet is a Mic'd packet
+
+ if (!ai->micstats.enabled) {
+ //No Mic set or Mic OFF but we received a MIC'd packet.
+ if (memcmp ((u8*)eth + 14, micsnap, sizeof(micsnap)) == 0) {
+ ai->micstats.rxMICPlummed++;
+ return ERROR;
+ }
+ return SUCCESS;
+ }
+
+ if (ntohs(mic->typelen) == 0x888E)
+ return SUCCESS;
+
+ if (memcmp (mic->u.snap, micsnap, sizeof(micsnap)) != 0) {
+ // Mic enabled but packet isn't Mic'd
+ ai->micstats.rxMICPlummed++;
+ return ERROR;
+ }
+
+ micSEQ = ntohl(mic->seq); //store SEQ as CPU order
+
+ //At this point we a have a mic'd packet and mic is enabled
+ //Now do the mic error checking.
+
+ //Receive seq must be odd
+ if ( (micSEQ & 1) == 0 ) {
+ ai->micstats.rxWrongSequence++;
+ return ERROR;
+ }
+
+ for (i = 0; i < NUM_MODULES; i++) {
+ int mcast = eth->da[0] & 1;
+ //Determine proper context
+ context = mcast ? &ai->mod[i].mCtx : &ai->mod[i].uCtx;
+
+ //Make sure context is valid
+ if (!context->valid) {
+ if (i == 0)
+ micError = NOMICPLUMMED;
+ continue;
+ }
+ //DeMic it
+
+ if (!mic->typelen)
+ mic->typelen = htons(payLen + sizeof(MICBuffer) - 2);
+
+ emmh32_init(&context->seed);
+ emmh32_update(&context->seed, eth->da, ETH_ALEN*2);
+ emmh32_update(&context->seed, (u8 *)&mic->typelen, sizeof(mic->typelen)+sizeof(mic->u.snap));
+ emmh32_update(&context->seed, (u8 *)&mic->seq,sizeof(mic->seq));
+ emmh32_update(&context->seed, eth->da + ETH_ALEN*2,payLen);
+ //Calculate MIC
+ emmh32_final(&context->seed, digest);
+
+ if (memcmp(digest, &mic->mic, 4)) { //Make sure the mics match
+ //Invalid Mic
+ if (i == 0)
+ micError = INCORRECTMIC;
+ continue;
+ }
+
+ //Check Sequence number if mics pass
+ if (RxSeqValid(ai, context, mcast, micSEQ) == SUCCESS) {
+ ai->micstats.rxSuccess++;
+ return SUCCESS;
+ }
+ if (i == 0)
+ micError = SEQUENCE;
+ }
+
+ // Update statistics
+ switch (micError) {
+ case NOMICPLUMMED: ai->micstats.rxMICPlummed++; break;
+ case SEQUENCE: ai->micstats.rxWrongSequence++; break;
+ case INCORRECTMIC: ai->micstats.rxIncorrectMIC++; break;
+ case NONE: break;
+ case NOMIC: break;
+ }
+ return ERROR;
+}
+
+/*===========================================================================
+ * Description: Checks the Rx Seq number to make sure it is valid
+ * and hasn't already been received
+ *
+ * Inputs: miccntx - mic context to check seq against
+ * micSeq - the Mic seq number
+ *
+ * Returns: TRUE if valid otherwise FALSE.
+ *
+ * Author: sbraneky (10/15/01)
+ * Merciless hacks by rwilcher (1/14/02)
+ *---------------------------------------------------------------------------
+ */
+
+static int RxSeqValid (struct airo_info *ai,miccntx *context,int mcast,u32 micSeq)
+{
+ u32 seq,index;
+
+ //Allow for the ap being rebooted - if it is then use the next
+ //sequence number of the current sequence number - might go backwards
+
+ if (mcast) {
+ if (test_bit(FLAG_UPDATE_MULTI, &ai->flags)) {
+ clear_bit (FLAG_UPDATE_MULTI, &ai->flags);
+ context->window = (micSeq > 33) ? micSeq : 33;
+ context->rx = 0; // Reset rx
+ }
+ } else if (test_bit(FLAG_UPDATE_UNI, &ai->flags)) {
+ clear_bit (FLAG_UPDATE_UNI, &ai->flags);
+ context->window = (micSeq > 33) ? micSeq : 33; // Move window
+ context->rx = 0; // Reset rx
+ }
+
+ //Make sequence number relative to START of window
+ seq = micSeq - (context->window - 33);
+
+ //Too old of a SEQ number to check.
+ if ((s32)seq < 0)
+ return ERROR;
+
+ if ( seq > 64 ) {
+ //Window is infinite forward
+ MoveWindow(context,micSeq);
+ return SUCCESS;
+ }
+
+ // We are in the window. Now check the context rx bit to see if it was already sent
+ seq >>= 1; //divide by 2 because we only have odd numbers
+ index = 1 << seq; //Get an index number
+
+ if (!(context->rx & index)) {
+ //micSEQ falls inside the window.
+ //Add seqence number to the list of received numbers.
+ context->rx |= index;
+
+ MoveWindow(context,micSeq);
+
+ return SUCCESS;
+ }
+ return ERROR;
+}
+
+static void MoveWindow(miccntx *context, u32 micSeq)
+{
+ u32 shift;
+
+ //Move window if seq greater than the middle of the window
+ if (micSeq > context->window) {
+ shift = (micSeq - context->window) >> 1;
+
+ //Shift out old
+ if (shift < 32)
+ context->rx >>= shift;
+ else
+ context->rx = 0;
+
+ context->window = micSeq; //Move window
+ }
+}
+
+/*==============================================*/
+/*========== EMMH ROUTINES ====================*/
+/*==============================================*/
+
+/* mic accumulate */
+#define MIC_ACCUM(val) \
+ context->accum += (u64)(val) * context->coeff[coeff_position++];
+
+static unsigned char aes_counter[16];
+
+/* expand the key to fill the MMH coefficient array */
+void emmh32_setseed(emmh32_context *context, u8 *pkey, int keylen, struct crypto_tfm *tfm)
+{
+ /* take the keying material, expand if necessary, truncate at 16-bytes */
+ /* run through AES counter mode to generate context->coeff[] */
+
+ int i,j;
+ u32 counter;
+ u8 *cipher, plain[16];
+ struct scatterlist sg[1];
+
+ crypto_cipher_setkey(tfm, pkey, 16);
+ counter = 0;
+ for (i = 0; i < (sizeof(context->coeff)/sizeof(context->coeff[0])); ) {
+ aes_counter[15] = (u8)(counter >> 0);
+ aes_counter[14] = (u8)(counter >> 8);
+ aes_counter[13] = (u8)(counter >> 16);
+ aes_counter[12] = (u8)(counter >> 24);
+ counter++;
+ memcpy (plain, aes_counter, 16);
+ sg[0].page = virt_to_page(plain);
+ sg[0].offset = ((long) plain & ~PAGE_MASK);
+ sg[0].length = 16;
+ crypto_cipher_encrypt(tfm, sg, sg, 16);
+ cipher = kmap(sg[0].page) + sg[0].offset;
+ for (j=0; (j<16) && (i< (sizeof(context->coeff)/sizeof(context->coeff[0]))); ) {
+ context->coeff[i++] = ntohl(*(u32 *)&cipher[j]);
+ j += 4;
+ }
+ }
+}
+
+/* prepare for calculation of a new mic */
+void emmh32_init(emmh32_context *context)
+{
+ /* prepare for new mic calculation */
+ context->accum = 0;
+ context->position = 0;
+}
+
+/* add some bytes to the mic calculation */
+void emmh32_update(emmh32_context *context, u8 *pOctets, int len)
+{
+ int coeff_position, byte_position;
+
+ if (len == 0) return;
+
+ coeff_position = context->position >> 2;
+
+ /* deal with partial 32-bit word left over from last update */
+ byte_position = context->position & 3;
+ if (byte_position) {
+ /* have a partial word in part to deal with */
+ do {
+ if (len == 0) return;
+ context->part.d8[byte_position++] = *pOctets++;
+ context->position++;
+ len--;
+ } while (byte_position < 4);
+ MIC_ACCUM(htonl(context->part.d32));
+ }
+
+ /* deal with full 32-bit words */
+ while (len >= 4) {
+ MIC_ACCUM(htonl(*(u32 *)pOctets));
+ context->position += 4;
+ pOctets += 4;
+ len -= 4;
+ }
+
+ /* deal with partial 32-bit word that will be left over from this update */
+ byte_position = 0;
+ while (len > 0) {
+ context->part.d8[byte_position++] = *pOctets++;
+ context->position++;
+ len--;
+ }
+}
+
+/* mask used to zero empty bytes for final partial word */
+static u32 mask32[4] = { 0x00000000L, 0xFF000000L, 0xFFFF0000L, 0xFFFFFF00L };
+
+/* calculate the mic */
+void emmh32_final(emmh32_context *context, u8 digest[4])
+{
+ int coeff_position, byte_position;
+ u32 val;
+
+ u64 sum, utmp;
+ s64 stmp;
+
+ coeff_position = context->position >> 2;
+
+ /* deal with partial 32-bit word left over from last update */
+ byte_position = context->position & 3;
+ if (byte_position) {
+ /* have a partial word in part to deal with */
+ val = htonl(context->part.d32);
+ MIC_ACCUM(val & mask32[byte_position]); /* zero empty bytes */
+ }
+
+ /* reduce the accumulated u64 to a 32-bit MIC */
+ sum = context->accum;
+ stmp = (sum & 0xffffffffLL) - ((sum >> 32) * 15);
+ utmp = (stmp & 0xffffffffLL) - ((stmp >> 32) * 15);
+ sum = utmp & 0xffffffffLL;
+ if (utmp > 0x10000000fLL)
+ sum -= 15;
+
+ val = (u32)sum;
+ digest[0] = (val>>24) & 0xFF;
+ digest[1] = (val>>16) & 0xFF;
+ digest[2] = (val>>8) & 0xFF;
+ digest[3] = val & 0xFF;
+}
+#endif
+
+static int readBSSListRid(struct airo_info *ai, int first,
+ BSSListRid *list) {
+ int rc;
+ Cmd cmd;
+ Resp rsp;
+
+ if (first == 1) {
+ if (ai->flags & FLAG_RADIO_MASK) return -ENETDOWN;
+ memset(&cmd, 0, sizeof(cmd));
+ cmd.cmd=CMD_LISTBSS;
+ if (down_interruptible(&ai->sem))
+ return -ERESTARTSYS;
+ issuecommand(ai, &cmd, &rsp);
+ up(&ai->sem);
+ /* Let the command take effect */
+ ai->task = current;
+ ssleep(3);
+ ai->task = NULL;
+ }
+ rc = PC4500_readrid(ai, first ? RID_BSSLISTFIRST : RID_BSSLISTNEXT,
+ list, sizeof(*list), 1);
+
+ list->len = le16_to_cpu(list->len);
+ list->index = le16_to_cpu(list->index);
+ list->radioType = le16_to_cpu(list->radioType);
+ list->cap = le16_to_cpu(list->cap);
+ list->beaconInterval = le16_to_cpu(list->beaconInterval);
+ list->fh.dwell = le16_to_cpu(list->fh.dwell);
+ list->dsChannel = le16_to_cpu(list->dsChannel);
+ list->atimWindow = le16_to_cpu(list->atimWindow);
+ return rc;
+}
+
+static int readWepKeyRid(struct airo_info*ai, WepKeyRid *wkr, int temp, int lock) {
+ int rc = PC4500_readrid(ai, temp ? RID_WEP_TEMP : RID_WEP_PERM,
+ wkr, sizeof(*wkr), lock);
+
+ wkr->len = le16_to_cpu(wkr->len);
+ wkr->kindex = le16_to_cpu(wkr->kindex);
+ wkr->klen = le16_to_cpu(wkr->klen);
+ return rc;
+}
+/* In the writeXXXRid routines we copy the rids so that we don't screwup
+ * the originals when we endian them... */
+static int writeWepKeyRid(struct airo_info*ai, WepKeyRid *pwkr, int perm, int lock) {
+ int rc;
+ WepKeyRid wkr = *pwkr;
+
+ wkr.len = cpu_to_le16(wkr.len);
+ wkr.kindex = cpu_to_le16(wkr.kindex);
+ wkr.klen = cpu_to_le16(wkr.klen);
+ rc = PC4500_writerid(ai, RID_WEP_TEMP, &wkr, sizeof(wkr), lock);
+ if (rc!=SUCCESS) printk(KERN_ERR "airo: WEP_TEMP set %x\n", rc);
+ if (perm) {
+ rc = PC4500_writerid(ai, RID_WEP_PERM, &wkr, sizeof(wkr), lock);
+ if (rc!=SUCCESS) {
+ printk(KERN_ERR "airo: WEP_PERM set %x\n", rc);
+ }
+ }
+ return rc;
+}
+
+static int readSsidRid(struct airo_info*ai, SsidRid *ssidr) {
+ int i;
+ int rc = PC4500_readrid(ai, RID_SSID, ssidr, sizeof(*ssidr), 1);
+
+ ssidr->len = le16_to_cpu(ssidr->len);
+ for(i = 0; i < 3; i++) {
+ ssidr->ssids[i].len = le16_to_cpu(ssidr->ssids[i].len);
+ }
+ return rc;
+}
+static int writeSsidRid(struct airo_info*ai, SsidRid *pssidr, int lock) {
+ int rc;
+ int i;
+ SsidRid ssidr = *pssidr;
+
+ ssidr.len = cpu_to_le16(ssidr.len);
+ for(i = 0; i < 3; i++) {
+ ssidr.ssids[i].len = cpu_to_le16(ssidr.ssids[i].len);
+ }
+ rc = PC4500_writerid(ai, RID_SSID, &ssidr, sizeof(ssidr), lock);
+ return rc;
+}
+static int readConfigRid(struct airo_info*ai, int lock) {
+ int rc;
+ u16 *s;
+ ConfigRid cfg;
+
+ if (ai->config.len)
+ return SUCCESS;
+
+ rc = PC4500_readrid(ai, RID_ACTUALCONFIG, &cfg, sizeof(cfg), lock);
+ if (rc != SUCCESS)
+ return rc;
+
+ for(s = &cfg.len; s <= &cfg.rtsThres; s++) *s = le16_to_cpu(*s);
+
+ for(s = &cfg.shortRetryLimit; s <= &cfg.radioType; s++)
+ *s = le16_to_cpu(*s);
+
+ for(s = &cfg.txPower; s <= &cfg.radioSpecific; s++)
+ *s = le16_to_cpu(*s);
+
+ for(s = &cfg.arlThreshold; s <= &cfg._reserved4[0]; s++)
+ *s = cpu_to_le16(*s);
+
+ for(s = &cfg.autoWake; s <= &cfg.autoWake; s++)
+ *s = cpu_to_le16(*s);
+
+ ai->config = cfg;
+ return SUCCESS;
+}
+static inline void checkThrottle(struct airo_info *ai) {
+ int i;
+/* Old hardware had a limit on encryption speed */
+ if (ai->config.authType != AUTH_OPEN && maxencrypt) {
+ for(i=0; i<8; i++) {
+ if (ai->config.rates[i] > maxencrypt) {
+ ai->config.rates[i] = 0;
+ }
+ }
+ }
+}
+static int writeConfigRid(struct airo_info*ai, int lock) {
+ u16 *s;
+ ConfigRid cfgr;
+
+ if (!test_bit (FLAG_COMMIT, &ai->flags))
+ return SUCCESS;
+
+ clear_bit (FLAG_COMMIT, &ai->flags);
+ clear_bit (FLAG_RESET, &ai->flags);
+ checkThrottle(ai);
+ cfgr = ai->config;
+
+ if ((cfgr.opmode & 0xFF) == MODE_STA_IBSS)
+ set_bit(FLAG_ADHOC, &ai->flags);
+ else
+ clear_bit(FLAG_ADHOC, &ai->flags);
+
+ for(s = &cfgr.len; s <= &cfgr.rtsThres; s++) *s = cpu_to_le16(*s);
+
+ for(s = &cfgr.shortRetryLimit; s <= &cfgr.radioType; s++)
+ *s = cpu_to_le16(*s);
+
+ for(s = &cfgr.txPower; s <= &cfgr.radioSpecific; s++)
+ *s = cpu_to_le16(*s);
+
+ for(s = &cfgr.arlThreshold; s <= &cfgr._reserved4[0]; s++)
+ *s = cpu_to_le16(*s);
+
+ for(s = &cfgr.autoWake; s <= &cfgr.autoWake; s++)
+ *s = cpu_to_le16(*s);
+
+ return PC4500_writerid( ai, RID_CONFIG, &cfgr, sizeof(cfgr), lock);
+}
+static int readStatusRid(struct airo_info*ai, StatusRid *statr, int lock) {
+ int rc = PC4500_readrid(ai, RID_STATUS, statr, sizeof(*statr), lock);
+ u16 *s;
+
+ statr->len = le16_to_cpu(statr->len);
+ for(s = &statr->mode; s <= &statr->SSIDlen; s++) *s = le16_to_cpu(*s);
+
+ for(s = &statr->beaconPeriod; s <= &statr->shortPreamble; s++)
+ *s = le16_to_cpu(*s);
+ statr->load = le16_to_cpu(statr->load);
+ statr->assocStatus = le16_to_cpu(statr->assocStatus);
+ return rc;
+}
+static int readAPListRid(struct airo_info*ai, APListRid *aplr) {
+ int rc = PC4500_readrid(ai, RID_APLIST, aplr, sizeof(*aplr), 1);
+ aplr->len = le16_to_cpu(aplr->len);
+ return rc;
+}
+static int writeAPListRid(struct airo_info*ai, APListRid *aplr, int lock) {
+ int rc;
+ aplr->len = cpu_to_le16(aplr->len);
+ rc = PC4500_writerid(ai, RID_APLIST, aplr, sizeof(*aplr), lock);
+ return rc;
+}
+static int readCapabilityRid(struct airo_info*ai, CapabilityRid *capr, int lock) {
+ int rc = PC4500_readrid(ai, RID_CAPABILITIES, capr, sizeof(*capr), lock);
+ u16 *s;
+
+ capr->len = le16_to_cpu(capr->len);
+ capr->prodNum = le16_to_cpu(capr->prodNum);
+ capr->radioType = le16_to_cpu(capr->radioType);
+ capr->country = le16_to_cpu(capr->country);
+ for(s = &capr->txPowerLevels[0]; s <= &capr->requiredHard; s++)
+ *s = le16_to_cpu(*s);
+ return rc;
+}
+static int readStatsRid(struct airo_info*ai, StatsRid *sr, int rid, int lock) {
+ int rc = PC4500_readrid(ai, rid, sr, sizeof(*sr), lock);
+ u32 *i;
+
+ sr->len = le16_to_cpu(sr->len);
+ for(i = &sr->vals[0]; i <= &sr->vals[99]; i++) *i = le32_to_cpu(*i);
+ return rc;
+}
+
+static int airo_open(struct net_device *dev) {
+ struct airo_info *info = dev->priv;
+ Resp rsp;
+
+ if (test_bit(FLAG_FLASHING, &info->flags))
+ return -EIO;
+
+ /* Make sure the card is configured.
+ * Wireless Extensions may postpone config changes until the card
+ * is open (to pipeline changes and speed-up card setup). If
+ * those changes are not yet commited, do it now - Jean II */
+ if (test_bit (FLAG_COMMIT, &info->flags)) {
+ disable_MAC(info, 1);
+ writeConfigRid(info, 1);
+ }
+
+ if (info->wifidev != dev) {
+ /* Power on the MAC controller (which may have been disabled) */
+ clear_bit(FLAG_RADIO_DOWN, &info->flags);
+ enable_interrupts(info);
+ }
+ enable_MAC(info, &rsp, 1);
+
+ netif_start_queue(dev);
+ return 0;
+}
+
+static int mpi_start_xmit(struct sk_buff *skb, struct net_device *dev) {
+ int npacks, pending;
+ unsigned long flags;
+ struct airo_info *ai = dev->priv;
+
+ if (!skb) {
+ printk(KERN_ERR "airo: %s: skb==NULL\n",__FUNCTION__);
+ return 0;
+ }
+ npacks = skb_queue_len (&ai->txq);
+
+ if (npacks >= MAXTXQ - 1) {
+ netif_stop_queue (dev);
+ if (npacks > MAXTXQ) {
+ ai->stats.tx_fifo_errors++;
+ return 1;
+ }
+ skb_queue_tail (&ai->txq, skb);
+ return 0;
+ }
+
+ spin_lock_irqsave(&ai->aux_lock, flags);
+ skb_queue_tail (&ai->txq, skb);
+ pending = test_bit(FLAG_PENDING_XMIT, &ai->flags);
+ spin_unlock_irqrestore(&ai->aux_lock,flags);
+ netif_wake_queue (dev);
+
+ if (pending == 0) {
+ set_bit(FLAG_PENDING_XMIT, &ai->flags);
+ mpi_send_packet (dev);
+ }
+ return 0;
+}
+
+/*
+ * @mpi_send_packet
+ *
+ * Attempt to transmit a packet. Can be called from interrupt
+ * or transmit . return number of packets we tried to send
+ */
+
+static int mpi_send_packet (struct net_device *dev)
+{
+ struct sk_buff *skb;
+ unsigned char *buffer;
+ s16 len, *payloadLen;
+ struct airo_info *ai = dev->priv;
+ u8 *sendbuf;
+
+ /* get a packet to send */
+
+ if ((skb = skb_dequeue(&ai->txq)) == 0) {
+ printk (KERN_ERR
+ "airo: %s: Dequeue'd zero in send_packet()\n",
+ __FUNCTION__);
+ return 0;
+ }
+
+ /* check min length*/
+ len = ETH_ZLEN < skb->len ? skb->len : ETH_ZLEN;
+ buffer = skb->data;
+
+ ai->txfids[0].tx_desc.offset = 0;
+ ai->txfids[0].tx_desc.valid = 1;
+ ai->txfids[0].tx_desc.eoc = 1;
+ ai->txfids[0].tx_desc.len =len+sizeof(WifiHdr);
+
+/*
+ * Magic, the cards firmware needs a length count (2 bytes) in the host buffer
+ * right after TXFID_HDR.The TXFID_HDR contains the status short so payloadlen
+ * is immediatly after it. ------------------------------------------------
+ * |TXFIDHDR+STATUS|PAYLOADLEN|802.3HDR|PACKETDATA|
+ * ------------------------------------------------
+ */
+
+ memcpy((char *)ai->txfids[0].virtual_host_addr,
+ (char *)&wifictlhdr8023, sizeof(wifictlhdr8023));
+
+ payloadLen = (s16 *)(ai->txfids[0].virtual_host_addr +
+ sizeof(wifictlhdr8023));
+ sendbuf = ai->txfids[0].virtual_host_addr +
+ sizeof(wifictlhdr8023) + 2 ;
+
+ /*
+ * Firmware automaticly puts 802 header on so
+ * we don't need to account for it in the length
+ */
+#ifdef MICSUPPORT
+ if (test_bit(FLAG_MIC_CAPABLE, &ai->flags) && ai->micstats.enabled &&
+ (ntohs(((u16 *)buffer)[6]) != 0x888E)) {
+ MICBuffer pMic;
+
+ if (encapsulate(ai, (etherHead *)buffer, &pMic, len - sizeof(etherHead)) != SUCCESS)
+ return ERROR;
+
+ *payloadLen = cpu_to_le16(len-sizeof(etherHead)+sizeof(pMic));
+ ai->txfids[0].tx_desc.len += sizeof(pMic);
+ /* copy data into airo dma buffer */
+ memcpy (sendbuf, buffer, sizeof(etherHead));
+ buffer += sizeof(etherHead);
+ sendbuf += sizeof(etherHead);
+ memcpy (sendbuf, &pMic, sizeof(pMic));
+ sendbuf += sizeof(pMic);
+ memcpy (sendbuf, buffer, len - sizeof(etherHead));
+ } else
+#endif
+ {
+ *payloadLen = cpu_to_le16(len - sizeof(etherHead));
+
+ dev->trans_start = jiffies;
+
+ /* copy data into airo dma buffer */
+ memcpy(sendbuf, buffer, len);
+ }
+
+ memcpy_toio(ai->txfids[0].card_ram_off,
+ &ai->txfids[0].tx_desc, sizeof(TxFid));
+
+ OUT4500(ai, EVACK, 8);
+
+ dev_kfree_skb_any(skb);
+ return 1;
+}
+
+static void get_tx_error(struct airo_info *ai, u32 fid)
+{
+ u16 status;
+
+ if (fid < 0)
+ status = ((WifiCtlHdr *)ai->txfids[0].virtual_host_addr)->ctlhdr.status;
+ else {
+ if (bap_setup(ai, ai->fids[fid] & 0xffff, 4, BAP0) != SUCCESS)
+ return;
+ bap_read(ai, &status, 2, BAP0);
+ }
+ if (le16_to_cpu(status) & 2) /* Too many retries */
+ ai->stats.tx_aborted_errors++;
+ if (le16_to_cpu(status) & 4) /* Transmit lifetime exceeded */
+ ai->stats.tx_heartbeat_errors++;
+ if (le16_to_cpu(status) & 8) /* Aid fail */
+ { }
+ if (le16_to_cpu(status) & 0x10) /* MAC disabled */
+ ai->stats.tx_carrier_errors++;
+ if (le16_to_cpu(status) & 0x20) /* Association lost */
+ { }
+ /* We produce a TXDROP event only for retry or lifetime
+ * exceeded, because that's the only status that really mean
+ * that this particular node went away.
+ * Other errors means that *we* screwed up. - Jean II */
+ if ((le16_to_cpu(status) & 2) ||
+ (le16_to_cpu(status) & 4)) {
+ union iwreq_data wrqu;
+ char junk[0x18];
+
+ /* Faster to skip over useless data than to do
+ * another bap_setup(). We are at offset 0x6 and
+ * need to go to 0x18 and read 6 bytes - Jean II */
+ bap_read(ai, (u16 *) junk, 0x18, BAP0);
+
+ /* Copy 802.11 dest address.
+ * We use the 802.11 header because the frame may
+ * not be 802.3 or may be mangled...
+ * In Ad-Hoc mode, it will be the node address.
+ * In managed mode, it will be most likely the AP addr
+ * User space will figure out how to convert it to
+ * whatever it needs (IP address or else).
+ * - Jean II */
+ memcpy(wrqu.addr.sa_data, junk + 0x12, ETH_ALEN);
+ wrqu.addr.sa_family = ARPHRD_ETHER;
+
+ /* Send event to user space */
+ wireless_send_event(ai->dev, IWEVTXDROP, &wrqu, NULL);
+ }
+}
+
+static void airo_end_xmit(struct net_device *dev) {
+ u16 status;
+ int i;
+ struct airo_info *priv = dev->priv;
+ struct sk_buff *skb = priv->xmit.skb;
+ int fid = priv->xmit.fid;
+ u32 *fids = priv->fids;
+
+ clear_bit(JOB_XMIT, &priv->flags);
+ clear_bit(FLAG_PENDING_XMIT, &priv->flags);
+ status = transmit_802_3_packet (priv, fids[fid], skb->data);
+ up(&priv->sem);
+
+ i = 0;
+ if ( status == SUCCESS ) {
+ dev->trans_start = jiffies;
+ for (; i < MAX_FIDS / 2 && (priv->fids[i] & 0xffff0000); i++);
+ } else {
+ priv->fids[fid] &= 0xffff;
+ priv->stats.tx_window_errors++;
+ }
+ if (i < MAX_FIDS / 2)
+ netif_wake_queue(dev);
+ dev_kfree_skb(skb);
+}
+
+static int airo_start_xmit(struct sk_buff *skb, struct net_device *dev) {
+ s16 len;
+ int i, j;
+ struct airo_info *priv = dev->priv;
+ u32 *fids = priv->fids;
+
+ if ( skb == NULL ) {
+ printk( KERN_ERR "airo: skb == NULL!!!\n" );
+ return 0;
+ }
+
+ /* Find a vacant FID */
+ for( i = 0; i < MAX_FIDS / 2 && (fids[i] & 0xffff0000); i++ );
+ for( j = i + 1; j < MAX_FIDS / 2 && (fids[j] & 0xffff0000); j++ );
+
+ if ( j >= MAX_FIDS / 2 ) {
+ netif_stop_queue(dev);
+
+ if (i == MAX_FIDS / 2) {
+ priv->stats.tx_fifo_errors++;
+ return 1;
+ }
+ }
+ /* check min length*/
+ len = ETH_ZLEN < skb->len ? skb->len : ETH_ZLEN;
+ /* Mark fid as used & save length for later */
+ fids[i] |= (len << 16);
+ priv->xmit.skb = skb;
+ priv->xmit.fid = i;
+ if (down_trylock(&priv->sem) != 0) {
+ set_bit(FLAG_PENDING_XMIT, &priv->flags);
+ netif_stop_queue(dev);
+ set_bit(JOB_XMIT, &priv->flags);
+ wake_up_interruptible(&priv->thr_wait);
+ } else
+ airo_end_xmit(dev);
+ return 0;
+}
+
+static void airo_end_xmit11(struct net_device *dev) {
+ u16 status;
+ int i;
+ struct airo_info *priv = dev->priv;
+ struct sk_buff *skb = priv->xmit11.skb;
+ int fid = priv->xmit11.fid;
+ u32 *fids = priv->fids;
+
+ clear_bit(JOB_XMIT11, &priv->flags);
+ clear_bit(FLAG_PENDING_XMIT11, &priv->flags);
+ status = transmit_802_11_packet (priv, fids[fid], skb->data);
+ up(&priv->sem);
+
+ i = MAX_FIDS / 2;
+ if ( status == SUCCESS ) {
+ dev->trans_start = jiffies;
+ for (; i < MAX_FIDS && (priv->fids[i] & 0xffff0000); i++);
+ } else {
+ priv->fids[fid] &= 0xffff;
+ priv->stats.tx_window_errors++;
+ }
+ if (i < MAX_FIDS)
+ netif_wake_queue(dev);
+ dev_kfree_skb(skb);
+}
+
+static int airo_start_xmit11(struct sk_buff *skb, struct net_device *dev) {
+ s16 len;
+ int i, j;
+ struct airo_info *priv = dev->priv;
+ u32 *fids = priv->fids;
+
+ if (test_bit(FLAG_MPI, &priv->flags)) {
+ /* Not implemented yet for MPI350 */
+ netif_stop_queue(dev);
+ return -ENETDOWN;
+ }
+
+ if ( skb == NULL ) {
+ printk( KERN_ERR "airo: skb == NULL!!!\n" );
+ return 0;
+ }
+
+ /* Find a vacant FID */
+ for( i = MAX_FIDS / 2; i < MAX_FIDS && (fids[i] & 0xffff0000); i++ );
+ for( j = i + 1; j < MAX_FIDS && (fids[j] & 0xffff0000); j++ );
+
+ if ( j >= MAX_FIDS ) {
+ netif_stop_queue(dev);
+
+ if (i == MAX_FIDS) {
+ priv->stats.tx_fifo_errors++;
+ return 1;
+ }
+ }
+ /* check min length*/
+ len = ETH_ZLEN < skb->len ? skb->len : ETH_ZLEN;
+ /* Mark fid as used & save length for later */
+ fids[i] |= (len << 16);
+ priv->xmit11.skb = skb;
+ priv->xmit11.fid = i;
+ if (down_trylock(&priv->sem) != 0) {
+ set_bit(FLAG_PENDING_XMIT11, &priv->flags);
+ netif_stop_queue(dev);
+ set_bit(JOB_XMIT11, &priv->flags);
+ wake_up_interruptible(&priv->thr_wait);
+ } else
+ airo_end_xmit11(dev);
+ return 0;
+}
+
+static void airo_read_stats(struct airo_info *ai) {
+ StatsRid stats_rid;
+ u32 *vals = stats_rid.vals;
+
+ clear_bit(JOB_STATS, &ai->flags);
+ if (ai->power) {
+ up(&ai->sem);
+ return;
+ }
+ readStatsRid(ai, &stats_rid, RID_STATS, 0);
+ up(&ai->sem);
+
+ ai->stats.rx_packets = vals[43] + vals[44] + vals[45];
+ ai->stats.tx_packets = vals[39] + vals[40] + vals[41];
+ ai->stats.rx_bytes = vals[92];
+ ai->stats.tx_bytes = vals[91];
+ ai->stats.rx_errors = vals[0] + vals[2] + vals[3] + vals[4];
+ ai->stats.tx_errors = vals[42] + ai->stats.tx_fifo_errors;
+ ai->stats.multicast = vals[43];
+ ai->stats.collisions = vals[89];
+
+ /* detailed rx_errors: */
+ ai->stats.rx_length_errors = vals[3];
+ ai->stats.rx_crc_errors = vals[4];
+ ai->stats.rx_frame_errors = vals[2];
+ ai->stats.rx_fifo_errors = vals[0];
+}
+
+struct net_device_stats *airo_get_stats(struct net_device *dev)
+{
+ struct airo_info *local = dev->priv;
+
+ if (!test_bit(JOB_STATS, &local->flags)) {
+ /* Get stats out of the card if available */
+ if (down_trylock(&local->sem) != 0) {
+ set_bit(JOB_STATS, &local->flags);
+ wake_up_interruptible(&local->thr_wait);
+ } else
+ airo_read_stats(local);
+ }
+
+ return &local->stats;
+}
+
+static void airo_set_promisc(struct airo_info *ai) {
+ Cmd cmd;
+ Resp rsp;
+
+ memset(&cmd, 0, sizeof(cmd));
+ cmd.cmd=CMD_SETMODE;
+ clear_bit(JOB_PROMISC, &ai->flags);
+ cmd.parm0=(ai->flags&IFF_PROMISC) ? PROMISC : NOPROMISC;
+ issuecommand(ai, &cmd, &rsp);
+ up(&ai->sem);
+}
+
+static void airo_set_multicast_list(struct net_device *dev) {
+ struct airo_info *ai = dev->priv;
+
+ if ((dev->flags ^ ai->flags) & IFF_PROMISC) {
+ change_bit(FLAG_PROMISC, &ai->flags);
+ if (down_trylock(&ai->sem) != 0) {
+ set_bit(JOB_PROMISC, &ai->flags);
+ wake_up_interruptible(&ai->thr_wait);
+ } else
+ airo_set_promisc(ai);
+ }
+
+ if ((dev->flags&IFF_ALLMULTI)||dev->mc_count>0) {
+ /* Turn on multicast. (Should be already setup...) */
+ }
+}
+
+static int airo_set_mac_address(struct net_device *dev, void *p)
+{
+ struct airo_info *ai = dev->priv;
+ struct sockaddr *addr = p;
+ Resp rsp;
+
+ readConfigRid(ai, 1);
+ memcpy (ai->config.macAddr, addr->sa_data, dev->addr_len);
+ set_bit (FLAG_COMMIT, &ai->flags);
+ disable_MAC(ai, 1);
+ writeConfigRid (ai, 1);
+ enable_MAC(ai, &rsp, 1);
+ memcpy (ai->dev->dev_addr, addr->sa_data, dev->addr_len);
+ if (ai->wifidev)
+ memcpy (ai->wifidev->dev_addr, addr->sa_data, dev->addr_len);
+ return 0;
+}
+
+static int airo_change_mtu(struct net_device *dev, int new_mtu)
+{
+ if ((new_mtu < 68) || (new_mtu > 2400))
+ return -EINVAL;
+ dev->mtu = new_mtu;
+ return 0;
+}
+
+
+static int airo_close(struct net_device *dev) {
+ struct airo_info *ai = dev->priv;
+
+ netif_stop_queue(dev);
+
+ if (ai->wifidev != dev) {
+#ifdef POWER_ON_DOWN
+ /* Shut power to the card. The idea is that the user can save
+ * power when he doesn't need the card with "ifconfig down".
+ * That's the method that is most friendly towards the network
+ * stack (i.e. the network stack won't try to broadcast
+ * anything on the interface and routes are gone. Jean II */
+ set_bit(FLAG_RADIO_DOWN, &ai->flags);
+ disable_MAC(ai, 1);
+#endif
+ disable_interrupts( ai );
+ }
+ return 0;
+}
+
+static void del_airo_dev( struct net_device *dev );
+
+void stop_airo_card( struct net_device *dev, int freeres )
+{
+ struct airo_info *ai = dev->priv;
+
+ set_bit(FLAG_RADIO_DOWN, &ai->flags);
+ disable_MAC(ai, 1);
+ disable_interrupts(ai);
+ free_irq( dev->irq, dev );
+ takedown_proc_entry( dev, ai );
+ if (test_bit(FLAG_REGISTERED, &ai->flags)) {
+ unregister_netdev( dev );
+ if (ai->wifidev) {
+ unregister_netdev(ai->wifidev);
+ free_netdev(ai->wifidev);
+ ai->wifidev = NULL;
+ }
+ clear_bit(FLAG_REGISTERED, &ai->flags);
+ }
+ set_bit(JOB_DIE, &ai->flags);
+ kill_proc(ai->thr_pid, SIGTERM, 1);
+ wait_for_completion(&ai->thr_exited);
+
+ /*
+ * Clean out tx queue
+ */
+ if (test_bit(FLAG_MPI, &ai->flags) && skb_queue_len (&ai->txq) > 0) {
+ struct sk_buff *skb = NULL;
+ for (;(skb = skb_dequeue(&ai->txq));)
+ dev_kfree_skb(skb);
+ }
+
+ if (ai->flash)
+ kfree(ai->flash);
+ if (ai->rssi)
+ kfree(ai->rssi);
+ if (ai->APList)
+ kfree(ai->APList);
+ if (ai->SSID)
+ kfree(ai->SSID);
+ if (freeres) {
+ /* PCMCIA frees this stuff, so only for PCI and ISA */
+ release_region( dev->base_addr, 64 );
+ if (test_bit(FLAG_MPI, &ai->flags)) {
+ if (ai->pci)
+ mpi_unmap_card(ai->pci);
+ if (ai->pcimem)
+ iounmap(ai->pcimem);
+ if (ai->pciaux)
+ iounmap(ai->pciaux);
+ pci_free_consistent(ai->pci, PCI_SHARED_LEN,
+ ai->shared, ai->shared_dma);
+ }
+ }
+#ifdef MICSUPPORT
+ if (ai->tfm)
+ crypto_free_tfm(ai->tfm);
+#endif
+ del_airo_dev( dev );
+ free_netdev( dev );
+}
+
+EXPORT_SYMBOL(stop_airo_card);
+
+static int add_airo_dev( struct net_device *dev );
+
+int wll_header_parse(struct sk_buff *skb, unsigned char *haddr)
+{
+ memcpy(haddr, skb->mac.raw + 10, ETH_ALEN);
+ return ETH_ALEN;
+}
+
+static void mpi_unmap_card(struct pci_dev *pci)
+{
+ unsigned long mem_start = pci_resource_start(pci, 1);
+ unsigned long mem_len = pci_resource_len(pci, 1);
+ unsigned long aux_start = pci_resource_start(pci, 2);
+ unsigned long aux_len = AUXMEMSIZE;
+
+ release_mem_region(aux_start, aux_len);
+ release_mem_region(mem_start, mem_len);
+}
+
+/*************************************************************
+ * This routine assumes that descriptors have been setup .
+ * Run at insmod time or after reset when the decriptors
+ * have been initialized . Returns 0 if all is well nz
+ * otherwise . Does not allocate memory but sets up card
+ * using previously allocated descriptors.
+ */
+static int mpi_init_descriptors (struct airo_info *ai)
+{
+ Cmd cmd;
+ Resp rsp;
+ int i;
+ int rc = SUCCESS;
+
+ /* Alloc card RX descriptors */
+ netif_stop_queue(ai->dev);
+
+ memset(&rsp,0,sizeof(rsp));
+ memset(&cmd,0,sizeof(cmd));
+
+ cmd.cmd = CMD_ALLOCATEAUX;
+ cmd.parm0 = FID_RX;
+ cmd.parm1 = (ai->rxfids[0].card_ram_off - ai->pciaux);
+ cmd.parm2 = MPI_MAX_FIDS;
+ rc=issuecommand(ai, &cmd, &rsp);
+ if (rc != SUCCESS) {
+ printk(KERN_ERR "airo: Couldn't allocate RX FID\n");
+ return rc;
+ }
+
+ for (i=0; i<MPI_MAX_FIDS; i++) {
+ memcpy_toio(ai->rxfids[i].card_ram_off,
+ &ai->rxfids[i].rx_desc, sizeof(RxFid));
+ }
+
+ /* Alloc card TX descriptors */
+
+ memset(&rsp,0,sizeof(rsp));
+ memset(&cmd,0,sizeof(cmd));
+
+ cmd.cmd = CMD_ALLOCATEAUX;
+ cmd.parm0 = FID_TX;
+ cmd.parm1 = (ai->txfids[0].card_ram_off - ai->pciaux);
+ cmd.parm2 = MPI_MAX_FIDS;
+
+ for (i=0; i<MPI_MAX_FIDS; i++) {
+ ai->txfids[i].tx_desc.valid = 1;
+ memcpy_toio(ai->txfids[i].card_ram_off,
+ &ai->txfids[i].tx_desc, sizeof(TxFid));
+ }
+ ai->txfids[i-1].tx_desc.eoc = 1; /* Last descriptor has EOC set */
+
+ rc=issuecommand(ai, &cmd, &rsp);
+ if (rc != SUCCESS) {
+ printk(KERN_ERR "airo: Couldn't allocate TX FID\n");
+ return rc;
+ }
+
+ /* Alloc card Rid descriptor */
+ memset(&rsp,0,sizeof(rsp));
+ memset(&cmd,0,sizeof(cmd));
+
+ cmd.cmd = CMD_ALLOCATEAUX;
+ cmd.parm0 = RID_RW;
+ cmd.parm1 = (ai->config_desc.card_ram_off - ai->pciaux);
+ cmd.parm2 = 1; /* Magic number... */
+ rc=issuecommand(ai, &cmd, &rsp);
+ if (rc != SUCCESS) {
+ printk(KERN_ERR "airo: Couldn't allocate RID\n");
+ return rc;
+ }
+
+ memcpy_toio(ai->config_desc.card_ram_off,
+ &ai->config_desc.rid_desc, sizeof(Rid));
+
+ return rc;
+}
+
+/*
+ * We are setting up three things here:
+ * 1) Map AUX memory for descriptors: Rid, TxFid, or RxFid.
+ * 2) Map PCI memory for issueing commands.
+ * 3) Allocate memory (shared) to send and receive ethernet frames.
+ */
+static int mpi_map_card(struct airo_info *ai, struct pci_dev *pci,
+ const char *name)
+{
+ unsigned long mem_start, mem_len, aux_start, aux_len;
+ int rc = -1;
+ int i;
+ unsigned char *busaddroff,*vpackoff;
+ unsigned char __iomem *pciaddroff;
+
+ mem_start = pci_resource_start(pci, 1);
+ mem_len = pci_resource_len(pci, 1);
+ aux_start = pci_resource_start(pci, 2);
+ aux_len = AUXMEMSIZE;
+
+ if (!request_mem_region(mem_start, mem_len, name)) {
+ printk(KERN_ERR "airo: Couldn't get region %x[%x] for %s\n",
+ (int)mem_start, (int)mem_len, name);
+ goto out;
+ }
+ if (!request_mem_region(aux_start, aux_len, name)) {
+ printk(KERN_ERR "airo: Couldn't get region %x[%x] for %s\n",
+ (int)aux_start, (int)aux_len, name);
+ goto free_region1;
+ }
+
+ ai->pcimem = ioremap(mem_start, mem_len);
+ if (!ai->pcimem) {
+ printk(KERN_ERR "airo: Couldn't map region %x[%x] for %s\n",
+ (int)mem_start, (int)mem_len, name);
+ goto free_region2;
+ }
+ ai->pciaux = ioremap(aux_start, aux_len);
+ if (!ai->pciaux) {
+ printk(KERN_ERR "airo: Couldn't map region %x[%x] for %s\n",
+ (int)aux_start, (int)aux_len, name);
+ goto free_memmap;
+ }
+
+ /* Reserve PKTSIZE for each fid and 2K for the Rids */
+ ai->shared = pci_alloc_consistent(pci, PCI_SHARED_LEN, &ai->shared_dma);
+ if (!ai->shared) {
+ printk(KERN_ERR "airo: Couldn't alloc_consistent %d\n",
+ PCI_SHARED_LEN);
+ goto free_auxmap;
+ }
+
+ /*
+ * Setup descriptor RX, TX, CONFIG
+ */
+ busaddroff = (unsigned char *)ai->shared_dma;
+ pciaddroff = ai->pciaux + AUX_OFFSET;
+ vpackoff = ai->shared;
+
+ /* RX descriptor setup */
+ for(i = 0; i < MPI_MAX_FIDS; i++) {
+ ai->rxfids[i].pending = 0;
+ ai->rxfids[i].card_ram_off = pciaddroff;
+ ai->rxfids[i].virtual_host_addr = vpackoff;
+ ai->rxfids[i].rx_desc.host_addr = (dma_addr_t) busaddroff;
+ ai->rxfids[i].rx_desc.valid = 1;
+ ai->rxfids[i].rx_desc.len = PKTSIZE;
+ ai->rxfids[i].rx_desc.rdy = 0;
+
+ pciaddroff += sizeof(RxFid);
+ busaddroff += PKTSIZE;
+ vpackoff += PKTSIZE;
+ }
+
+ /* TX descriptor setup */
+ for(i = 0; i < MPI_MAX_FIDS; i++) {
+ ai->txfids[i].card_ram_off = pciaddroff;
+ ai->txfids[i].virtual_host_addr = vpackoff;
+ ai->txfids[i].tx_desc.valid = 1;
+ ai->txfids[i].tx_desc.host_addr = (dma_addr_t) busaddroff;
+ memcpy(ai->txfids[i].virtual_host_addr,
+ &wifictlhdr8023, sizeof(wifictlhdr8023));
+
+ pciaddroff += sizeof(TxFid);
+ busaddroff += PKTSIZE;
+ vpackoff += PKTSIZE;
+ }
+ ai->txfids[i-1].tx_desc.eoc = 1; /* Last descriptor has EOC set */
+
+ /* Rid descriptor setup */
+ ai->config_desc.card_ram_off = pciaddroff;
+ ai->config_desc.virtual_host_addr = vpackoff;
+ ai->config_desc.rid_desc.host_addr = (dma_addr_t) busaddroff;
+ ai->ridbus = (dma_addr_t)busaddroff;
+ ai->config_desc.rid_desc.rid = 0;
+ ai->config_desc.rid_desc.len = RIDSIZE;
+ ai->config_desc.rid_desc.valid = 1;
+ pciaddroff += sizeof(Rid);
+ busaddroff += RIDSIZE;
+ vpackoff += RIDSIZE;
+
+ /* Tell card about descriptors */
+ if (mpi_init_descriptors (ai) != SUCCESS)
+ goto free_shared;
+
+ return 0;
+ free_shared:
+ pci_free_consistent(pci, PCI_SHARED_LEN, ai->shared, ai->shared_dma);
+ free_auxmap:
+ iounmap(ai->pciaux);
+ free_memmap:
+ iounmap(ai->pcimem);
+ free_region2:
+ release_mem_region(aux_start, aux_len);
+ free_region1:
+ release_mem_region(mem_start, mem_len);
+ out:
+ return rc;
+}
+
+static void wifi_setup(struct net_device *dev)
+{
+ dev->hard_header = NULL;
+ dev->rebuild_header = NULL;
+ dev->hard_header_cache = NULL;
+ dev->header_cache_update= NULL;
+
+ dev->hard_header_parse = wll_header_parse;
+ dev->hard_start_xmit = &airo_start_xmit11;
+ dev->get_stats = &airo_get_stats;
+ dev->set_mac_address = &airo_set_mac_address;
+ dev->do_ioctl = &airo_ioctl;
+#ifdef WIRELESS_EXT
+ dev->wireless_handlers = &airo_handler_def;
+#endif /* WIRELESS_EXT */
+ dev->change_mtu = &airo_change_mtu;
+ dev->open = &airo_open;
+ dev->stop = &airo_close;
+
+ dev->type = ARPHRD_IEEE80211;
+ dev->hard_header_len = ETH_HLEN;
+ dev->mtu = 2312;
+ dev->addr_len = ETH_ALEN;
+ dev->tx_queue_len = 100;
+
+ memset(dev->broadcast,0xFF, ETH_ALEN);
+
+ dev->flags = IFF_BROADCAST|IFF_MULTICAST;
+}
+
+static struct net_device *init_wifidev(struct airo_info *ai,
+ struct net_device *ethdev)
+{
+ int err;
+ struct net_device *dev = alloc_netdev(0, "wifi%d", wifi_setup);
+ if (!dev)
+ return NULL;
+ dev->priv = ethdev->priv;
+ dev->irq = ethdev->irq;
+ dev->base_addr = ethdev->base_addr;
+#ifdef WIRELESS_EXT
+ dev->wireless_data = ethdev->wireless_data;
+#endif /* WIRELESS_EXT */
+ memcpy(dev->dev_addr, ethdev->dev_addr, dev->addr_len);
+ err = register_netdev(dev);
+ if (err<0) {
+ free_netdev(dev);
+ return NULL;
+ }
+ return dev;
+}
+
+int reset_card( struct net_device *dev , int lock) {
+ struct airo_info *ai = dev->priv;
+
+ if (lock && down_interruptible(&ai->sem))
+ return -1;
+ waitbusy (ai);
+ OUT4500(ai,COMMAND,CMD_SOFTRESET);
+ msleep(200);
+ waitbusy (ai);
+ msleep(200);
+ if (lock)
+ up(&ai->sem);
+ return 0;
+}
+
+struct net_device *_init_airo_card( unsigned short irq, int port,
+ int is_pcmcia, struct pci_dev *pci,
+ struct device *dmdev )
+{
+ struct net_device *dev;
+ struct airo_info *ai;
+ int i, rc;
+
+ /* Create the network device object. */
+ dev = alloc_etherdev(sizeof(*ai));
+ if (!dev) {
+ printk(KERN_ERR "airo: Couldn't alloc_etherdev\n");
+ return NULL;
+ }
+ if (dev_alloc_name(dev, dev->name) < 0) {
+ printk(KERN_ERR "airo: Couldn't get name!\n");
+ goto err_out_free;
+ }
+
+ ai = dev->priv;
+ ai->wifidev = NULL;
+ ai->flags = 0;
+ if (pci && (pci->device == 0x5000 || pci->device == 0xa504)) {
+ printk(KERN_DEBUG "airo: Found an MPI350 card\n");
+ set_bit(FLAG_MPI, &ai->flags);
+ }
+ ai->dev = dev;
+ spin_lock_init(&ai->aux_lock);
+ sema_init(&ai->sem, 1);
+ ai->config.len = 0;
+ ai->pci = pci;
+ init_waitqueue_head (&ai->thr_wait);
+ init_completion (&ai->thr_exited);
+ ai->thr_pid = kernel_thread(airo_thread, dev, CLONE_FS | CLONE_FILES);
+ if (ai->thr_pid < 0)
+ goto err_out_free;
+#ifdef MICSUPPORT
+ ai->tfm = NULL;
+#endif
+ rc = add_airo_dev( dev );
+ if (rc)
+ goto err_out_thr;
+
+ /* The Airo-specific entries in the device structure. */
+ if (test_bit(FLAG_MPI,&ai->flags)) {
+ skb_queue_head_init (&ai->txq);
+ dev->hard_start_xmit = &mpi_start_xmit;
+ } else
+ dev->hard_start_xmit = &airo_start_xmit;
+ dev->get_stats = &airo_get_stats;
+ dev->set_multicast_list = &airo_set_multicast_list;
+ dev->set_mac_address = &airo_set_mac_address;
+ dev->do_ioctl = &airo_ioctl;
+#ifdef WIRELESS_EXT
+ dev->wireless_handlers = &airo_handler_def;
+ ai->wireless_data.spy_data = &ai->spy_data;
+ dev->wireless_data = &ai->wireless_data;
+#endif /* WIRELESS_EXT */
+ dev->change_mtu = &airo_change_mtu;
+ dev->open = &airo_open;
+ dev->stop = &airo_close;
+ dev->irq = irq;
+ dev->base_addr = port;
+
+ SET_NETDEV_DEV(dev, dmdev);
+
+
+ if (test_bit(FLAG_MPI,&ai->flags))
+ reset_card (dev, 1);
+
+ rc = request_irq( dev->irq, airo_interrupt, SA_SHIRQ, dev->name, dev );
+ if (rc) {
+ printk(KERN_ERR "airo: register interrupt %d failed, rc %d\n", irq, rc );
+ goto err_out_unlink;
+ }
+ if (!is_pcmcia) {
+ if (!request_region( dev->base_addr, 64, dev->name )) {
+ rc = -EBUSY;
+ printk(KERN_ERR "airo: Couldn't request region\n");
+ goto err_out_irq;
+ }
+ }
+
+ if (test_bit(FLAG_MPI,&ai->flags)) {
+ if (mpi_map_card(ai, pci, dev->name)) {
+ printk(KERN_ERR "airo: Could not map memory\n");
+ goto err_out_res;
+ }
+ }
+
+ if (probe) {
+ if ( setup_card( ai, dev->dev_addr, 1 ) != SUCCESS ) {
+ printk( KERN_ERR "airo: MAC could not be enabled\n" );
+ rc = -EIO;
+ goto err_out_map;
+ }
+ } else if (!test_bit(FLAG_MPI,&ai->flags)) {
+ ai->bap_read = fast_bap_read;
+ set_bit(FLAG_FLASHING, &ai->flags);
+ }
+
+ rc = register_netdev(dev);
+ if (rc) {
+ printk(KERN_ERR "airo: Couldn't register_netdev\n");
+ goto err_out_map;
+ }
+ ai->wifidev = init_wifidev(ai, dev);
+
+ set_bit(FLAG_REGISTERED,&ai->flags);
+ printk( KERN_INFO "airo: MAC enabled %s %x:%x:%x:%x:%x:%x\n",
+ dev->name,
+ dev->dev_addr[0], dev->dev_addr[1], dev->dev_addr[2],
+ dev->dev_addr[3], dev->dev_addr[4], dev->dev_addr[5] );
+
+ /* Allocate the transmit buffers */
+ if (probe && !test_bit(FLAG_MPI,&ai->flags))
+ for( i = 0; i < MAX_FIDS; i++ )
+ ai->fids[i] = transmit_allocate(ai,2312,i>=MAX_FIDS/2);
+
+ setup_proc_entry( dev, dev->priv ); /* XXX check for failure */
+ netif_start_queue(dev);
+ SET_MODULE_OWNER(dev);
+ return dev;
+
+err_out_map:
+ if (test_bit(FLAG_MPI,&ai->flags) && pci) {
+ pci_free_consistent(pci, PCI_SHARED_LEN, ai->shared, ai->shared_dma);
+ iounmap(ai->pciaux);
+ iounmap(ai->pcimem);
+ mpi_unmap_card(ai->pci);
+ }
+err_out_res:
+ if (!is_pcmcia)
+ release_region( dev->base_addr, 64 );
+err_out_irq:
+ free_irq(dev->irq, dev);
+err_out_unlink:
+ del_airo_dev(dev);
+err_out_thr:
+ set_bit(JOB_DIE, &ai->flags);
+ kill_proc(ai->thr_pid, SIGTERM, 1);
+ wait_for_completion(&ai->thr_exited);
+err_out_free:
+ free_netdev(dev);
+ return NULL;
+}
+
+struct net_device *init_airo_card( unsigned short irq, int port, int is_pcmcia,
+ struct device *dmdev)
+{
+ return _init_airo_card ( irq, port, is_pcmcia, NULL, dmdev);
+}
+
+EXPORT_SYMBOL(init_airo_card);
+
+static int waitbusy (struct airo_info *ai) {
+ int delay = 0;
+ while ((IN4500 (ai, COMMAND) & COMMAND_BUSY) & (delay < 10000)) {
+ udelay (10);
+ if ((++delay % 20) == 0)
+ OUT4500(ai, EVACK, EV_CLEARCOMMANDBUSY);
+ }
+ return delay < 10000;
+}
+
+int reset_airo_card( struct net_device *dev )
+{
+ int i;
+ struct airo_info *ai = dev->priv;
+
+ if (reset_card (dev, 1))
+ return -1;
+
+ if ( setup_card(ai, dev->dev_addr, 1 ) != SUCCESS ) {
+ printk( KERN_ERR "airo: MAC could not be enabled\n" );
+ return -1;
+ }
+ printk( KERN_INFO "airo: MAC enabled %s %x:%x:%x:%x:%x:%x\n", dev->name,
+ dev->dev_addr[0], dev->dev_addr[1], dev->dev_addr[2],
+ dev->dev_addr[3], dev->dev_addr[4], dev->dev_addr[5]);
+ /* Allocate the transmit buffers if needed */
+ if (!test_bit(FLAG_MPI,&ai->flags))
+ for( i = 0; i < MAX_FIDS; i++ )
+ ai->fids[i] = transmit_allocate (ai,2312,i>=MAX_FIDS/2);
+
+ enable_interrupts( ai );
+ netif_wake_queue(dev);
+ return 0;
+}
+
+EXPORT_SYMBOL(reset_airo_card);
+
+static void airo_send_event(struct net_device *dev) {
+ struct airo_info *ai = dev->priv;
+ union iwreq_data wrqu;
+ StatusRid status_rid;
+
+ clear_bit(JOB_EVENT, &ai->flags);
+ PC4500_readrid(ai, RID_STATUS, &status_rid, sizeof(status_rid), 0);
+ up(&ai->sem);
+ wrqu.data.length = 0;
+ wrqu.data.flags = 0;
+ memcpy(wrqu.ap_addr.sa_data, status_rid.bssid[0], ETH_ALEN);
+ wrqu.ap_addr.sa_family = ARPHRD_ETHER;
+
+ /* Send event to user space */
+ wireless_send_event(dev, SIOCGIWAP, &wrqu, NULL);
+}
+
+static int airo_thread(void *data) {
+ struct net_device *dev = data;
+ struct airo_info *ai = dev->priv;
+ int locked;
+
+ daemonize("%s", dev->name);
+ allow_signal(SIGTERM);
+
+ while(1) {
+ if (signal_pending(current))
+ flush_signals(current);
+
+ /* make swsusp happy with our thread */
+ try_to_freeze(PF_FREEZE);
+
+ if (test_bit(JOB_DIE, &ai->flags))
+ break;
+
+ if (ai->flags & JOB_MASK) {
+ locked = down_interruptible(&ai->sem);
+ } else {
+ wait_queue_t wait;
+
+ init_waitqueue_entry(&wait, current);
+ add_wait_queue(&ai->thr_wait, &wait);
+ for (;;) {
+ set_current_state(TASK_INTERRUPTIBLE);
+ if (ai->flags & JOB_MASK)
+ break;
+ if (ai->expires) {
+ if (time_after_eq(jiffies,ai->expires)){
+ set_bit(JOB_AUTOWEP,&ai->flags);
+ break;
+ }
+ if (!signal_pending(current)) {
+ schedule_timeout(ai->expires - jiffies);
+ continue;
+ }
+ } else if (!signal_pending(current)) {
+ schedule();
+ continue;
+ }
+ break;
+ }
+ current->state = TASK_RUNNING;
+ remove_wait_queue(&ai->thr_wait, &wait);
+ locked = 1;
+ }
+
+ if (locked)
+ continue;
+
+ if (test_bit(JOB_DIE, &ai->flags)) {
+ up(&ai->sem);
+ break;
+ }
+
+ if (ai->power || test_bit(FLAG_FLASHING, &ai->flags)) {
+ up(&ai->sem);
+ continue;
+ }
+
+ if (test_bit(JOB_XMIT, &ai->flags))
+ airo_end_xmit(dev);
+ else if (test_bit(JOB_XMIT11, &ai->flags))
+ airo_end_xmit11(dev);
+ else if (test_bit(JOB_STATS, &ai->flags))
+ airo_read_stats(ai);
+ else if (test_bit(JOB_WSTATS, &ai->flags))
+ airo_read_wireless_stats(ai);
+ else if (test_bit(JOB_PROMISC, &ai->flags))
+ airo_set_promisc(ai);
+#ifdef MICSUPPORT
+ else if (test_bit(JOB_MIC, &ai->flags))
+ micinit(ai);
+#endif
+ else if (test_bit(JOB_EVENT, &ai->flags))
+ airo_send_event(dev);
+ else if (test_bit(JOB_AUTOWEP, &ai->flags))
+ timer_func(dev);
+ }
+ complete_and_exit (&ai->thr_exited, 0);
+}
+
+static irqreturn_t airo_interrupt ( int irq, void* dev_id, struct pt_regs *regs) {
+ struct net_device *dev = (struct net_device *)dev_id;
+ u16 status;
+ u16 fid;
+ struct airo_info *apriv = dev->priv;
+ u16 savedInterrupts = 0;
+ int handled = 0;
+
+ if (!netif_device_present(dev))
+ return IRQ_NONE;
+
+ for (;;) {
+ status = IN4500( apriv, EVSTAT );
+ if ( !(status & STATUS_INTS) || status == 0xffff ) break;
+
+ handled = 1;
+
+ if ( status & EV_AWAKE ) {
+ OUT4500( apriv, EVACK, EV_AWAKE );
+ OUT4500( apriv, EVACK, EV_AWAKE );
+ }
+
+ if (!savedInterrupts) {
+ savedInterrupts = IN4500( apriv, EVINTEN );
+ OUT4500( apriv, EVINTEN, 0 );
+ }
+
+ if ( status & EV_MIC ) {
+ OUT4500( apriv, EVACK, EV_MIC );
+#ifdef MICSUPPORT
+ if (test_bit(FLAG_MIC_CAPABLE, &apriv->flags)) {
+ set_bit(JOB_MIC, &apriv->flags);
+ wake_up_interruptible(&apriv->thr_wait);
+ }
+#endif
+ }
+ if ( status & EV_LINK ) {
+ union iwreq_data wrqu;
+ /* The link status has changed, if you want to put a
+ monitor hook in, do it here. (Remember that
+ interrupts are still disabled!)
+ */
+ u16 newStatus = IN4500(apriv, LINKSTAT);
+ OUT4500( apriv, EVACK, EV_LINK);
+ /* Here is what newStatus means: */
+#define NOBEACON 0x8000 /* Loss of sync - missed beacons */
+#define MAXRETRIES 0x8001 /* Loss of sync - max retries */
+#define MAXARL 0x8002 /* Loss of sync - average retry level exceeded*/
+#define FORCELOSS 0x8003 /* Loss of sync - host request */
+#define TSFSYNC 0x8004 /* Loss of sync - TSF synchronization */
+#define DEAUTH 0x8100 /* Deauthentication (low byte is reason code) */
+#define DISASS 0x8200 /* Disassociation (low byte is reason code) */
+#define ASSFAIL 0x8400 /* Association failure (low byte is reason
+ code) */
+#define AUTHFAIL 0x0300 /* Authentication failure (low byte is reason
+ code) */
+#define ASSOCIATED 0x0400 /* Assocatied */
+#define RC_RESERVED 0 /* Reserved return code */
+#define RC_NOREASON 1 /* Unspecified reason */
+#define RC_AUTHINV 2 /* Previous authentication invalid */
+#define RC_DEAUTH 3 /* Deauthenticated because sending station is
+ leaving */
+#define RC_NOACT 4 /* Disassociated due to inactivity */
+#define RC_MAXLOAD 5 /* Disassociated because AP is unable to handle
+ all currently associated stations */
+#define RC_BADCLASS2 6 /* Class 2 frame received from
+ non-Authenticated station */
+#define RC_BADCLASS3 7 /* Class 3 frame received from
+ non-Associated station */
+#define RC_STATLEAVE 8 /* Disassociated because sending station is
+ leaving BSS */
+#define RC_NOAUTH 9 /* Station requesting (Re)Association is not
+ Authenticated with the responding station */
+ if (newStatus != ASSOCIATED) {
+ if (auto_wep && !apriv->expires) {
+ apriv->expires = RUN_AT(3*HZ);
+ wake_up_interruptible(&apriv->thr_wait);
+ }
+ } else {
+ struct task_struct *task = apriv->task;
+ if (auto_wep)
+ apriv->expires = 0;
+ if (task)
+ wake_up_process (task);
+ set_bit(FLAG_UPDATE_UNI, &apriv->flags);
+ set_bit(FLAG_UPDATE_MULTI, &apriv->flags);
+ }
+ /* Question : is ASSOCIATED the only status
+ * that is valid ? We want to catch handover
+ * and reassociations as valid status
+ * Jean II */
+ if(newStatus == ASSOCIATED) {
+ if (apriv->scan_timestamp) {
+ /* Send an empty event to user space.
+ * We don't send the received data on
+ * the event because it would require
+ * us to do complex transcoding, and
+ * we want to minimise the work done in
+ * the irq handler. Use a request to
+ * extract the data - Jean II */
+ wrqu.data.length = 0;
+ wrqu.data.flags = 0;
+ wireless_send_event(dev, SIOCGIWSCAN, &wrqu, NULL);
+ apriv->scan_timestamp = 0;
+ }
+ if (down_trylock(&apriv->sem) != 0) {
+ set_bit(JOB_EVENT, &apriv->flags);
+ wake_up_interruptible(&apriv->thr_wait);
+ } else
+ airo_send_event(dev);
+ } else {
+ memset(wrqu.ap_addr.sa_data, '\0', ETH_ALEN);
+ wrqu.ap_addr.sa_family = ARPHRD_ETHER;
+
+ /* Send event to user space */
+ wireless_send_event(dev, SIOCGIWAP, &wrqu,NULL);
+ }
+ }
+
+ /* Check to see if there is something to receive */
+ if ( status & EV_RX ) {
+ struct sk_buff *skb = NULL;
+ u16 fc, len, hdrlen = 0;
+#pragma pack(1)
+ struct {
+ u16 status, len;
+ u8 rssi[2];
+ u8 rate;
+ u8 freq;
+ u16 tmp[4];
+ } hdr;
+#pragma pack()
+ u16 gap;
+ u16 tmpbuf[4];
+ u16 *buffer;
+
+ if (test_bit(FLAG_MPI,&apriv->flags)) {
+ if (test_bit(FLAG_802_11, &apriv->flags))
+ mpi_receive_802_11(apriv);
+ else
+ mpi_receive_802_3(apriv);
+ OUT4500(apriv, EVACK, EV_RX);
+ goto exitrx;
+ }
+
+ fid = IN4500( apriv, RXFID );
+
+ /* Get the packet length */
+ if (test_bit(FLAG_802_11, &apriv->flags)) {
+ bap_setup (apriv, fid, 4, BAP0);
+ bap_read (apriv, (u16*)&hdr, sizeof(hdr), BAP0);
+ /* Bad CRC. Ignore packet */
+ if (le16_to_cpu(hdr.status) & 2)
+ hdr.len = 0;
+ if (apriv->wifidev == NULL)
+ hdr.len = 0;
+ } else {
+ bap_setup (apriv, fid, 0x36, BAP0);
+ bap_read (apriv, (u16*)&hdr.len, 2, BAP0);
+ }
+ len = le16_to_cpu(hdr.len);
+
+ if (len > 2312) {
+ printk( KERN_ERR "airo: Bad size %d\n", len );
+ goto badrx;
+ }
+ if (len == 0)
+ goto badrx;
+
+ if (test_bit(FLAG_802_11, &apriv->flags)) {
+ bap_read (apriv, (u16*)&fc, sizeof(fc), BAP0);
+ fc = le16_to_cpu(fc);
+ switch (fc & 0xc) {
+ case 4:
+ if ((fc & 0xe0) == 0xc0)
+ hdrlen = 10;
+ else
+ hdrlen = 16;
+ break;
+ case 8:
+ if ((fc&0x300)==0x300){
+ hdrlen = 30;
+ break;
+ }
+ default:
+ hdrlen = 24;
+ }
+ } else
+ hdrlen = ETH_ALEN * 2;
+
+ skb = dev_alloc_skb( len + hdrlen + 2 + 2 );
+ if ( !skb ) {
+ apriv->stats.rx_dropped++;
+ goto badrx;
+ }
+ skb_reserve(skb, 2); /* This way the IP header is aligned */
+ buffer = (u16*)skb_put (skb, len + hdrlen);
+ if (test_bit(FLAG_802_11, &apriv->flags)) {
+ buffer[0] = fc;
+ bap_read (apriv, buffer + 1, hdrlen - 2, BAP0);
+ if (hdrlen == 24)
+ bap_read (apriv, tmpbuf, 6, BAP0);
+
+ bap_read (apriv, &gap, sizeof(gap), BAP0);
+ gap = le16_to_cpu(gap);
+ if (gap) {
+ if (gap <= 8)
+ bap_read (apriv, tmpbuf, gap, BAP0);
+ else
+ printk(KERN_ERR "airo: gaplen too big. Problems will follow...\n");
+ }
+ bap_read (apriv, buffer + hdrlen/2, len, BAP0);
+ } else {
+#ifdef MICSUPPORT
+ MICBuffer micbuf;
+#endif
+ bap_read (apriv, buffer, ETH_ALEN*2, BAP0);
+#ifdef MICSUPPORT
+ if (apriv->micstats.enabled) {
+ bap_read (apriv,(u16*)&micbuf,sizeof(micbuf),BAP0);
+ if (ntohs(micbuf.typelen) > 0x05DC)
+ bap_setup (apriv, fid, 0x44, BAP0);
+ else {
+ if (len <= sizeof(micbuf))
+ goto badmic;
+
+ len -= sizeof(micbuf);
+ skb_trim (skb, len + hdrlen);
+ }
+ }
+#endif
+ bap_read(apriv,buffer+ETH_ALEN,len,BAP0);
+#ifdef MICSUPPORT
+ if (decapsulate(apriv,&micbuf,(etherHead*)buffer,len)) {
+badmic:
+ dev_kfree_skb_irq (skb);
+#else
+ if (0) {
+#endif
+badrx:
+ OUT4500( apriv, EVACK, EV_RX);
+ goto exitrx;
+ }
+ }
+#ifdef WIRELESS_SPY
+ if (apriv->spy_data.spy_number > 0) {
+ char *sa;
+ struct iw_quality wstats;
+ /* Prepare spy data : addr + qual */
+ if (!test_bit(FLAG_802_11, &apriv->flags)) {
+ sa = (char*)buffer + 6;
+ bap_setup (apriv, fid, 8, BAP0);
+ bap_read (apriv, (u16*)hdr.rssi, 2, BAP0);
+ } else
+ sa = (char*)buffer + 10;
+ wstats.qual = hdr.rssi[0];
+ if (apriv->rssi)
+ wstats.level = 0x100 - apriv->rssi[hdr.rssi[1]].rssidBm;
+ else
+ wstats.level = (hdr.rssi[1] + 321) / 2;
+ wstats.updated = 3;
+ /* Update spy records */
+ wireless_spy_update(dev, sa, &wstats);
+ }
+#endif /* WIRELESS_SPY */
+ OUT4500( apriv, EVACK, EV_RX);
+
+ if (test_bit(FLAG_802_11, &apriv->flags)) {
+ skb->mac.raw = skb->data;
+ skb->pkt_type = PACKET_OTHERHOST;
+ skb->dev = apriv->wifidev;
+ skb->protocol = htons(ETH_P_802_2);
+ } else {
+ skb->dev = dev;
+ skb->protocol = eth_type_trans(skb,dev);
+ }
+ skb->dev->last_rx = jiffies;
+ skb->ip_summed = CHECKSUM_NONE;
+
+ netif_rx( skb );
+ }
+exitrx:
+
+ /* Check to see if a packet has been transmitted */
+ if ( status & ( EV_TX|EV_TXCPY|EV_TXEXC ) ) {
+ int i;
+ int len = 0;
+ int index = -1;
+
+ if (test_bit(FLAG_MPI,&apriv->flags)) {
+ unsigned long flags;
+
+ if (status & EV_TXEXC)
+ get_tx_error(apriv, -1);
+ spin_lock_irqsave(&apriv->aux_lock, flags);
+ if (skb_queue_len (&apriv->txq)) {
+ spin_unlock_irqrestore(&apriv->aux_lock,flags);
+ mpi_send_packet (dev);
+ } else {
+ clear_bit(FLAG_PENDING_XMIT, &apriv->flags);
+ spin_unlock_irqrestore(&apriv->aux_lock,flags);
+ netif_wake_queue (dev);
+ }
+ OUT4500( apriv, EVACK,
+ status & (EV_TX|EV_TXCPY|EV_TXEXC));
+ goto exittx;
+ }
+
+ fid = IN4500(apriv, TXCOMPLFID);
+
+ for( i = 0; i < MAX_FIDS; i++ ) {
+ if ( ( apriv->fids[i] & 0xffff ) == fid ) {
+ len = apriv->fids[i] >> 16;
+ index = i;
+ }
+ }
+ if (index != -1) {
+ if (status & EV_TXEXC)
+ get_tx_error(apriv, index);
+ OUT4500( apriv, EVACK, status & (EV_TX | EV_TXEXC));
+ /* Set up to be used again */
+ apriv->fids[index] &= 0xffff;
+ if (index < MAX_FIDS / 2) {
+ if (!test_bit(FLAG_PENDING_XMIT, &apriv->flags))
+ netif_wake_queue(dev);
+ } else {
+ if (!test_bit(FLAG_PENDING_XMIT11, &apriv->flags))
+ netif_wake_queue(apriv->wifidev);
+ }
+ } else {
+ OUT4500( apriv, EVACK, status & (EV_TX | EV_TXCPY | EV_TXEXC));
+ printk( KERN_ERR "airo: Unallocated FID was used to xmit\n" );
+ }
+ }
+exittx:
+ if ( status & ~STATUS_INTS & ~IGNORE_INTS )
+ printk( KERN_WARNING "airo: Got weird status %x\n",
+ status & ~STATUS_INTS & ~IGNORE_INTS );
+ }
+
+ if (savedInterrupts)
+ OUT4500( apriv, EVINTEN, savedInterrupts );
+
+ /* done.. */
+ return IRQ_RETVAL(handled);
+}
+
+/*
+ * Routines to talk to the card
+ */
+
+/*
+ * This was originally written for the 4500, hence the name
+ * NOTE: If use with 8bit mode and SMP bad things will happen!
+ * Why would some one do 8 bit IO in an SMP machine?!?
+ */
+static void OUT4500( struct airo_info *ai, u16 reg, u16 val ) {
+ if (test_bit(FLAG_MPI,&ai->flags))
+ reg <<= 1;
+ if ( !do8bitIO )
+ outw( val, ai->dev->base_addr + reg );
+ else {
+ outb( val & 0xff, ai->dev->base_addr + reg );
+ outb( val >> 8, ai->dev->base_addr + reg + 1 );
+ }
+}
+
+static u16 IN4500( struct airo_info *ai, u16 reg ) {
+ unsigned short rc;
+
+ if (test_bit(FLAG_MPI,&ai->flags))
+ reg <<= 1;
+ if ( !do8bitIO )
+ rc = inw( ai->dev->base_addr + reg );
+ else {
+ rc = inb( ai->dev->base_addr + reg );
+ rc += ((int)inb( ai->dev->base_addr + reg + 1 )) << 8;
+ }
+ return rc;
+}
+
+static int enable_MAC( struct airo_info *ai, Resp *rsp, int lock ) {
+ int rc;
+ Cmd cmd;
+
+ /* FLAG_RADIO_OFF : Radio disabled via /proc or Wireless Extensions
+ * FLAG_RADIO_DOWN : Radio disabled via "ifconfig ethX down"
+ * Note : we could try to use !netif_running(dev) in enable_MAC()
+ * instead of this flag, but I don't trust it *within* the
+ * open/close functions, and testing both flags together is
+ * "cheaper" - Jean II */
+ if (ai->flags & FLAG_RADIO_MASK) return SUCCESS;
+
+ if (lock && down_interruptible(&ai->sem))
+ return -ERESTARTSYS;
+
+ if (!test_bit(FLAG_ENABLED, &ai->flags)) {
+ memset(&cmd, 0, sizeof(cmd));
+ cmd.cmd = MAC_ENABLE;
+ rc = issuecommand(ai, &cmd, rsp);
+ if (rc == SUCCESS)
+ set_bit(FLAG_ENABLED, &ai->flags);
+ } else
+ rc = SUCCESS;
+
+ if (lock)
+ up(&ai->sem);
+
+ if (rc)
+ printk(KERN_ERR "%s: Cannot enable MAC, err=%d\n",
+ __FUNCTION__,rc);
+ return rc;
+}
+
+static void disable_MAC( struct airo_info *ai, int lock ) {
+ Cmd cmd;
+ Resp rsp;
+
+ if (lock && down_interruptible(&ai->sem))
+ return;
+
+ if (test_bit(FLAG_ENABLED, &ai->flags)) {
+ memset(&cmd, 0, sizeof(cmd));
+ cmd.cmd = MAC_DISABLE; // disable in case already enabled
+ issuecommand(ai, &cmd, &rsp);
+ clear_bit(FLAG_ENABLED, &ai->flags);
+ }
+ if (lock)
+ up(&ai->sem);
+}
+
+static void enable_interrupts( struct airo_info *ai ) {
+ /* Enable the interrupts */
+ OUT4500( ai, EVINTEN, STATUS_INTS );
+}
+
+static void disable_interrupts( struct airo_info *ai ) {
+ OUT4500( ai, EVINTEN, 0 );
+}
+
+static void mpi_receive_802_3(struct airo_info *ai)
+{
+ RxFid rxd;
+ int len = 0;
+ struct sk_buff *skb;
+ char *buffer;
+#ifdef MICSUPPORT
+ int off = 0;
+ MICBuffer micbuf;
+#endif
+
+ memcpy_fromio(&rxd, ai->rxfids[0].card_ram_off, sizeof(rxd));
+ /* Make sure we got something */
+ if (rxd.rdy && rxd.valid == 0) {
+ len = rxd.len + 12;
+ if (len < 12 || len > 2048)
+ goto badrx;
+
+ skb = dev_alloc_skb(len);
+ if (!skb) {
+ ai->stats.rx_dropped++;
+ goto badrx;
+ }
+ buffer = skb_put(skb,len);
+#ifdef MICSUPPORT
+ memcpy(buffer, ai->rxfids[0].virtual_host_addr, ETH_ALEN * 2);
+ if (ai->micstats.enabled) {
+ memcpy(&micbuf,
+ ai->rxfids[0].virtual_host_addr + ETH_ALEN * 2,
+ sizeof(micbuf));
+ if (ntohs(micbuf.typelen) <= 0x05DC) {
+ if (len <= sizeof(micbuf) + ETH_ALEN * 2)
+ goto badmic;
+
+ off = sizeof(micbuf);
+ skb_trim (skb, len - off);
+ }
+ }
+ memcpy(buffer + ETH_ALEN * 2,
+ ai->rxfids[0].virtual_host_addr + ETH_ALEN * 2 + off,
+ len - ETH_ALEN * 2 - off);
+ if (decapsulate (ai, &micbuf, (etherHead*)buffer, len - off - ETH_ALEN * 2)) {
+badmic:
+ dev_kfree_skb_irq (skb);
+ goto badrx;
+ }
+#else
+ memcpy(buffer, ai->rxfids[0].virtual_host_addr, len);
+#endif
+#ifdef WIRELESS_SPY
+ if (ai->spy_data.spy_number > 0) {
+ char *sa;
+ struct iw_quality wstats;
+ /* Prepare spy data : addr + qual */
+ sa = buffer + ETH_ALEN;
+ wstats.qual = 0; /* XXX Where do I get that info from ??? */
+ wstats.level = 0;
+ wstats.updated = 0;
+ /* Update spy records */
+ wireless_spy_update(ai->dev, sa, &wstats);
+ }
+#endif /* WIRELESS_SPY */
+
+ skb->dev = ai->dev;
+ skb->ip_summed = CHECKSUM_NONE;
+ skb->protocol = eth_type_trans(skb, ai->dev);
+ skb->dev->last_rx = jiffies;
+ netif_rx(skb);
+ }
+badrx:
+ if (rxd.valid == 0) {
+ rxd.valid = 1;
+ rxd.rdy = 0;
+ rxd.len = PKTSIZE;
+ memcpy_toio(ai->rxfids[0].card_ram_off, &rxd, sizeof(rxd));
+ }
+}
+
+void mpi_receive_802_11 (struct airo_info *ai)
+{
+ RxFid rxd;
+ struct sk_buff *skb = NULL;
+ u16 fc, len, hdrlen = 0;
+#pragma pack(1)
+ struct {
+ u16 status, len;
+ u8 rssi[2];
+ u8 rate;
+ u8 freq;
+ u16 tmp[4];
+ } hdr;
+#pragma pack()
+ u16 gap;
+ u16 *buffer;
+ char *ptr = ai->rxfids[0].virtual_host_addr+4;
+
+ memcpy_fromio(&rxd, ai->rxfids[0].card_ram_off, sizeof(rxd));
+ memcpy ((char *)&hdr, ptr, sizeof(hdr));
+ ptr += sizeof(hdr);
+ /* Bad CRC. Ignore packet */
+ if (le16_to_cpu(hdr.status) & 2)
+ hdr.len = 0;
+ if (ai->wifidev == NULL)
+ hdr.len = 0;
+ len = le16_to_cpu(hdr.len);
+ if (len > 2312) {
+ printk( KERN_ERR "airo: Bad size %d\n", len );
+ goto badrx;
+ }
+ if (len == 0)
+ goto badrx;
+
+ memcpy ((char *)&fc, ptr, sizeof(fc));
+ fc = le16_to_cpu(fc);
+ switch (fc & 0xc) {
+ case 4:
+ if ((fc & 0xe0) == 0xc0)
+ hdrlen = 10;
+ else
+ hdrlen = 16;
+ break;
+ case 8:
+ if ((fc&0x300)==0x300){
+ hdrlen = 30;
+ break;
+ }
+ default:
+ hdrlen = 24;
+ }
+
+ skb = dev_alloc_skb( len + hdrlen + 2 );
+ if ( !skb ) {
+ ai->stats.rx_dropped++;
+ goto badrx;
+ }
+ buffer = (u16*)skb_put (skb, len + hdrlen);
+ memcpy ((char *)buffer, ptr, hdrlen);
+ ptr += hdrlen;
+ if (hdrlen == 24)
+ ptr += 6;
+ memcpy ((char *)&gap, ptr, sizeof(gap));
+ ptr += sizeof(gap);
+ gap = le16_to_cpu(gap);
+ if (gap) {
+ if (gap <= 8)
+ ptr += gap;
+ else
+ printk(KERN_ERR
+ "airo: gaplen too big. Problems will follow...\n");
+ }
+ memcpy ((char *)buffer + hdrlen, ptr, len);
+ ptr += len;
+#ifdef IW_WIRELESS_SPY /* defined in iw_handler.h */
+ if (ai->spy_data.spy_number > 0) {
+ char *sa;
+ struct iw_quality wstats;
+ /* Prepare spy data : addr + qual */
+ sa = (char*)buffer + 10;
+ wstats.qual = hdr.rssi[0];
+ if (ai->rssi)
+ wstats.level = 0x100 - ai->rssi[hdr.rssi[1]].rssidBm;
+ else
+ wstats.level = (hdr.rssi[1] + 321) / 2;
+ wstats.updated = 3;
+ /* Update spy records */
+ wireless_spy_update(ai->dev, sa, &wstats);
+ }
+#endif /* IW_WIRELESS_SPY */
+ skb->mac.raw = skb->data;
+ skb->pkt_type = PACKET_OTHERHOST;
+ skb->dev = ai->wifidev;
+ skb->protocol = htons(ETH_P_802_2);
+ skb->dev->last_rx = jiffies;
+ skb->ip_summed = CHECKSUM_NONE;
+ netif_rx( skb );
+badrx:
+ if (rxd.valid == 0) {
+ rxd.valid = 1;
+ rxd.rdy = 0;
+ rxd.len = PKTSIZE;
+ memcpy_toio(ai->rxfids[0].card_ram_off, &rxd, sizeof(rxd));
+ }
+}
+
+static u16 setup_card(struct airo_info *ai, u8 *mac, int lock)
+{
+ Cmd cmd;
+ Resp rsp;
+ int status;
+ int i;
+ SsidRid mySsid;
+ u16 lastindex;
+ WepKeyRid wkr;
+ int rc;
+
+ memset( &mySsid, 0, sizeof( mySsid ) );
+ if (ai->flash) {
+ kfree (ai->flash);
+ ai->flash = NULL;
+ }
+
+ /* The NOP is the first step in getting the card going */
+ cmd.cmd = NOP;
+ cmd.parm0 = cmd.parm1 = cmd.parm2 = 0;
+ if (lock && down_interruptible(&ai->sem))
+ return ERROR;
+ if ( issuecommand( ai, &cmd, &rsp ) != SUCCESS ) {
+ if (lock)
+ up(&ai->sem);
+ return ERROR;
+ }
+ disable_MAC( ai, 0);
+
+ // Let's figure out if we need to use the AUX port
+ if (!test_bit(FLAG_MPI,&ai->flags)) {
+ cmd.cmd = CMD_ENABLEAUX;
+ if (issuecommand(ai, &cmd, &rsp) != SUCCESS) {
+ if (lock)
+ up(&ai->sem);
+ printk(KERN_ERR "airo: Error checking for AUX port\n");
+ return ERROR;
+ }
+ if (!aux_bap || rsp.status & 0xff00) {
+ ai->bap_read = fast_bap_read;
+ printk(KERN_DEBUG "airo: Doing fast bap_reads\n");
+ } else {
+ ai->bap_read = aux_bap_read;
+ printk(KERN_DEBUG "airo: Doing AUX bap_reads\n");
+ }
+ }
+ if (lock)
+ up(&ai->sem);
+ if (ai->config.len == 0) {
+ tdsRssiRid rssi_rid;
+ CapabilityRid cap_rid;
+
+ if (ai->APList) {
+ kfree(ai->APList);
+ ai->APList = NULL;
+ }
+ if (ai->SSID) {
+ kfree(ai->SSID);
+ ai->SSID = NULL;
+ }
+ // general configuration (read/modify/write)
+ status = readConfigRid(ai, lock);
+ if ( status != SUCCESS ) return ERROR;
+
+ status = readCapabilityRid(ai, &cap_rid, lock);
+ if ( status != SUCCESS ) return ERROR;
+
+ status = PC4500_readrid(ai,RID_RSSI,&rssi_rid,sizeof(rssi_rid),lock);
+ if ( status == SUCCESS ) {
+ if (ai->rssi || (ai->rssi = kmalloc(512, GFP_KERNEL)) != NULL)
+ memcpy(ai->rssi, (u8*)&rssi_rid + 2, 512);
+ }
+ else {
+ if (ai->rssi) {
+ kfree(ai->rssi);
+ ai->rssi = NULL;
+ }
+ if (cap_rid.softCap & 8)
+ ai->config.rmode |= RXMODE_NORMALIZED_RSSI;
+ else
+ printk(KERN_WARNING "airo: unknown received signal level scale\n");
+ }
+ ai->config.opmode = adhoc ? MODE_STA_IBSS : MODE_STA_ESS;
+ ai->config.authType = AUTH_OPEN;
+ ai->config.modulation = MOD_CCK;
+
+#ifdef MICSUPPORT
+ if ((cap_rid.len>=sizeof(cap_rid)) && (cap_rid.extSoftCap&1) &&
+ (micsetup(ai) == SUCCESS)) {
+ ai->config.opmode |= MODE_MIC;
+ set_bit(FLAG_MIC_CAPABLE, &ai->flags);
+ }
+#endif
+
+ /* Save off the MAC */
+ for( i = 0; i < ETH_ALEN; i++ ) {
+ mac[i] = ai->config.macAddr[i];
+ }
+
+ /* Check to see if there are any insmod configured
+ rates to add */
+ if ( rates[0] ) {
+ int i = 0;
+ memset(ai->config.rates,0,sizeof(ai->config.rates));
+ for( i = 0; i < 8 && rates[i]; i++ ) {
+ ai->config.rates[i] = rates[i];
+ }
+ }
+ if ( basic_rate > 0 ) {
+ int i;
+ for( i = 0; i < 8; i++ ) {
+ if ( ai->config.rates[i] == basic_rate ||
+ !ai->config.rates ) {
+ ai->config.rates[i] = basic_rate | 0x80;
+ break;
+ }
+ }
+ }
+ set_bit (FLAG_COMMIT, &ai->flags);
+ }
+
+ /* Setup the SSIDs if present */
+ if ( ssids[0] ) {
+ int i;
+ for( i = 0; i < 3 && ssids[i]; i++ ) {
+ mySsid.ssids[i].len = strlen(ssids[i]);
+ if ( mySsid.ssids[i].len > 32 )
+ mySsid.ssids[i].len = 32;
+ memcpy(mySsid.ssids[i].ssid, ssids[i],
+ mySsid.ssids[i].len);
+ }
+ mySsid.len = sizeof(mySsid);
+ }
+
+ status = writeConfigRid(ai, lock);
+ if ( status != SUCCESS ) return ERROR;
+
+ /* Set up the SSID list */
+ if ( ssids[0] ) {
+ status = writeSsidRid(ai, &mySsid, lock);
+ if ( status != SUCCESS ) return ERROR;
+ }
+
+ status = enable_MAC(ai, &rsp, lock);
+ if ( status != SUCCESS || (rsp.status & 0xFF00) != 0) {
+ printk( KERN_ERR "airo: Bad MAC enable reason = %x, rid = %x, offset = %d\n", rsp.rsp0, rsp.rsp1, rsp.rsp2 );
+ return ERROR;
+ }
+
+ /* Grab the initial wep key, we gotta save it for auto_wep */
+ rc = readWepKeyRid(ai, &wkr, 1, lock);
+ if (rc == SUCCESS) do {
+ lastindex = wkr.kindex;
+ if (wkr.kindex == 0xffff) {
+ ai->defindex = wkr.mac[0];
+ }
+ rc = readWepKeyRid(ai, &wkr, 0, lock);
+ } while(lastindex != wkr.kindex);
+
+ if (auto_wep) {
+ ai->expires = RUN_AT(3*HZ);
+ wake_up_interruptible(&ai->thr_wait);
+ }
+
+ return SUCCESS;
+}
+
+static u16 issuecommand(struct airo_info *ai, Cmd *pCmd, Resp *pRsp) {
+ // Im really paranoid about letting it run forever!
+ int max_tries = 600000;
+
+ if (IN4500(ai, EVSTAT) & EV_CMD)
+ OUT4500(ai, EVACK, EV_CMD);
+
+ OUT4500(ai, PARAM0, pCmd->parm0);
+ OUT4500(ai, PARAM1, pCmd->parm1);
+ OUT4500(ai, PARAM2, pCmd->parm2);
+ OUT4500(ai, COMMAND, pCmd->cmd);
+
+ while (max_tries-- && (IN4500(ai, EVSTAT) & EV_CMD) == 0) {
+ if ((IN4500(ai, COMMAND)) == pCmd->cmd)
+ // PC4500 didn't notice command, try again
+ OUT4500(ai, COMMAND, pCmd->cmd);
+ if (!in_atomic() && (max_tries & 255) == 0)
+ schedule();
+ }
+
+ if ( max_tries == -1 ) {
+ printk( KERN_ERR
+ "airo: Max tries exceeded when issueing command\n" );
+ if (IN4500(ai, COMMAND) & COMMAND_BUSY)
+ OUT4500(ai, EVACK, EV_CLEARCOMMANDBUSY);
+ return ERROR;
+ }
+
+ // command completed
+ pRsp->status = IN4500(ai, STATUS);
+ pRsp->rsp0 = IN4500(ai, RESP0);
+ pRsp->rsp1 = IN4500(ai, RESP1);
+ pRsp->rsp2 = IN4500(ai, RESP2);
+ if ((pRsp->status & 0xff00)!=0 && pCmd->cmd != CMD_SOFTRESET) {
+ printk (KERN_ERR "airo: cmd= %x\n", pCmd->cmd);
+ printk (KERN_ERR "airo: status= %x\n", pRsp->status);
+ printk (KERN_ERR "airo: Rsp0= %x\n", pRsp->rsp0);
+ printk (KERN_ERR "airo: Rsp1= %x\n", pRsp->rsp1);
+ printk (KERN_ERR "airo: Rsp2= %x\n", pRsp->rsp2);
+ }
+
+ // clear stuck command busy if necessary
+ if (IN4500(ai, COMMAND) & COMMAND_BUSY) {
+ OUT4500(ai, EVACK, EV_CLEARCOMMANDBUSY);
+ }
+ // acknowledge processing the status/response
+ OUT4500(ai, EVACK, EV_CMD);
+
+ return SUCCESS;
+}
+
+/* Sets up the bap to start exchange data. whichbap should
+ * be one of the BAP0 or BAP1 defines. Locks should be held before
+ * calling! */
+static int bap_setup(struct airo_info *ai, u16 rid, u16 offset, int whichbap )
+{
+ int timeout = 50;
+ int max_tries = 3;
+
+ OUT4500(ai, SELECT0+whichbap, rid);
+ OUT4500(ai, OFFSET0+whichbap, offset);
+ while (1) {
+ int status = IN4500(ai, OFFSET0+whichbap);
+ if (status & BAP_BUSY) {
+ /* This isn't really a timeout, but its kinda
+ close */
+ if (timeout--) {
+ continue;
+ }
+ } else if ( status & BAP_ERR ) {
+ /* invalid rid or offset */
+ printk( KERN_ERR "airo: BAP error %x %d\n",
+ status, whichbap );
+ return ERROR;
+ } else if (status & BAP_DONE) { // success
+ return SUCCESS;
+ }
+ if ( !(max_tries--) ) {
+ printk( KERN_ERR
+ "airo: BAP setup error too many retries\n" );
+ return ERROR;
+ }
+ // -- PC4500 missed it, try again
+ OUT4500(ai, SELECT0+whichbap, rid);
+ OUT4500(ai, OFFSET0+whichbap, offset);
+ timeout = 50;
+ }
+}
+
+/* should only be called by aux_bap_read. This aux function and the
+ following use concepts not documented in the developers guide. I
+ got them from a patch given to my by Aironet */
+static u16 aux_setup(struct airo_info *ai, u16 page,
+ u16 offset, u16 *len)
+{
+ u16 next;
+
+ OUT4500(ai, AUXPAGE, page);
+ OUT4500(ai, AUXOFF, 0);
+ next = IN4500(ai, AUXDATA);
+ *len = IN4500(ai, AUXDATA)&0xff;
+ if (offset != 4) OUT4500(ai, AUXOFF, offset);
+ return next;
+}
+
+/* requires call to bap_setup() first */
+static int aux_bap_read(struct airo_info *ai, u16 *pu16Dst,
+ int bytelen, int whichbap)
+{
+ u16 len;
+ u16 page;
+ u16 offset;
+ u16 next;
+ int words;
+ int i;
+ unsigned long flags;
+
+ spin_lock_irqsave(&ai->aux_lock, flags);
+ page = IN4500(ai, SWS0+whichbap);
+ offset = IN4500(ai, SWS2+whichbap);
+ next = aux_setup(ai, page, offset, &len);
+ words = (bytelen+1)>>1;
+
+ for (i=0; i<words;) {
+ int count;
+ count = (len>>1) < (words-i) ? (len>>1) : (words-i);
+ if ( !do8bitIO )
+ insw( ai->dev->base_addr+DATA0+whichbap,
+ pu16Dst+i,count );
+ else
+ insb( ai->dev->base_addr+DATA0+whichbap,
+ pu16Dst+i, count << 1 );
+ i += count;
+ if (i<words) {
+ next = aux_setup(ai, next, 4, &len);
+ }
+ }
+ spin_unlock_irqrestore(&ai->aux_lock, flags);
+ return SUCCESS;
+}
+
+
+/* requires call to bap_setup() first */
+static int fast_bap_read(struct airo_info *ai, u16 *pu16Dst,
+ int bytelen, int whichbap)
+{
+ bytelen = (bytelen + 1) & (~1); // round up to even value
+ if ( !do8bitIO )
+ insw( ai->dev->base_addr+DATA0+whichbap, pu16Dst, bytelen>>1 );
+ else
+ insb( ai->dev->base_addr+DATA0+whichbap, pu16Dst, bytelen );
+ return SUCCESS;
+}
+
+/* requires call to bap_setup() first */
+static int bap_write(struct airo_info *ai, const u16 *pu16Src,
+ int bytelen, int whichbap)
+{
+ bytelen = (bytelen + 1) & (~1); // round up to even value
+ if ( !do8bitIO )
+ outsw( ai->dev->base_addr+DATA0+whichbap,
+ pu16Src, bytelen>>1 );
+ else
+ outsb( ai->dev->base_addr+DATA0+whichbap, pu16Src, bytelen );
+ return SUCCESS;
+}
+
+static int PC4500_accessrid(struct airo_info *ai, u16 rid, u16 accmd)
+{
+ Cmd cmd; /* for issuing commands */
+ Resp rsp; /* response from commands */
+ u16 status;
+
+ memset(&cmd, 0, sizeof(cmd));
+ cmd.cmd = accmd;
+ cmd.parm0 = rid;
+ status = issuecommand(ai, &cmd, &rsp);
+ if (status != 0) return status;
+ if ( (rsp.status & 0x7F00) != 0) {
+ return (accmd << 8) + (rsp.rsp0 & 0xFF);
+ }
+ return 0;
+}
+
+/* Note, that we are using BAP1 which is also used by transmit, so
+ * we must get a lock. */
+static int PC4500_readrid(struct airo_info *ai, u16 rid, void *pBuf, int len, int lock)
+{
+ u16 status;
+ int rc = SUCCESS;
+
+ if (lock) {
+ if (down_interruptible(&ai->sem))
+ return ERROR;
+ }
+ if (test_bit(FLAG_MPI,&ai->flags)) {
+ Cmd cmd;
+ Resp rsp;
+
+ memset(&cmd, 0, sizeof(cmd));
+ memset(&rsp, 0, sizeof(rsp));
+ ai->config_desc.rid_desc.valid = 1;
+ ai->config_desc.rid_desc.len = RIDSIZE;
+ ai->config_desc.rid_desc.rid = 0;
+ ai->config_desc.rid_desc.host_addr = ai->ridbus;
+
+ cmd.cmd = CMD_ACCESS;
+ cmd.parm0 = rid;
+
+ memcpy_toio(ai->config_desc.card_ram_off,
+ &ai->config_desc.rid_desc, sizeof(Rid));
+
+ rc = issuecommand(ai, &cmd, &rsp);
+
+ if (rsp.status & 0x7f00)
+ rc = rsp.rsp0;
+ if (!rc)
+ memcpy(pBuf, ai->config_desc.virtual_host_addr, len);
+ goto done;
+ } else {
+ if ((status = PC4500_accessrid(ai, rid, CMD_ACCESS))!=SUCCESS) {
+ rc = status;
+ goto done;
+ }
+ if (bap_setup(ai, rid, 0, BAP1) != SUCCESS) {
+ rc = ERROR;
+ goto done;
+ }
+ // read the rid length field
+ bap_read(ai, pBuf, 2, BAP1);
+ // length for remaining part of rid
+ len = min(len, (int)le16_to_cpu(*(u16*)pBuf)) - 2;
+
+ if ( len <= 2 ) {
+ printk( KERN_ERR
+ "airo: Rid %x has a length of %d which is too short\n",
+ (int)rid, (int)len );
+ rc = ERROR;
+ goto done;
+ }
+ // read remainder of the rid
+ rc = bap_read(ai, ((u16*)pBuf)+1, len, BAP1);
+ }
+done:
+ if (lock)
+ up(&ai->sem);
+ return rc;
+}
+
+/* Note, that we are using BAP1 which is also used by transmit, so
+ * make sure this isnt called when a transmit is happening */
+static int PC4500_writerid(struct airo_info *ai, u16 rid,
+ const void *pBuf, int len, int lock)
+{
+ u16 status;
+ int rc = SUCCESS;
+
+ *(u16*)pBuf = cpu_to_le16((u16)len);
+
+ if (lock) {
+ if (down_interruptible(&ai->sem))
+ return ERROR;
+ }
+ if (test_bit(FLAG_MPI,&ai->flags)) {
+ Cmd cmd;
+ Resp rsp;
+
+ if (test_bit(FLAG_ENABLED, &ai->flags))
+ printk(KERN_ERR
+ "%s: MAC should be disabled (rid=%04x)\n",
+ __FUNCTION__, rid);
+ memset(&cmd, 0, sizeof(cmd));
+ memset(&rsp, 0, sizeof(rsp));
+
+ ai->config_desc.rid_desc.valid = 1;
+ ai->config_desc.rid_desc.len = *((u16 *)pBuf);
+ ai->config_desc.rid_desc.rid = 0;
+
+ cmd.cmd = CMD_WRITERID;
+ cmd.parm0 = rid;
+
+ memcpy_toio(ai->config_desc.card_ram_off,
+ &ai->config_desc.rid_desc, sizeof(Rid));
+
+ if (len < 4 || len > 2047) {
+ printk(KERN_ERR "%s: len=%d\n",__FUNCTION__,len);
+ rc = -1;
+ } else {
+ memcpy((char *)ai->config_desc.virtual_host_addr,
+ pBuf, len);
+
+ rc = issuecommand(ai, &cmd, &rsp);
+ if ((rc & 0xff00) != 0) {
+ printk(KERN_ERR "%s: Write rid Error %d\n",
+ __FUNCTION__,rc);
+ printk(KERN_ERR "%s: Cmd=%04x\n",
+ __FUNCTION__,cmd.cmd);
+ }
+
+ if ((rsp.status & 0x7f00))
+ rc = rsp.rsp0;
+ }
+ } else {
+ // --- first access so that we can write the rid data
+ if ( (status = PC4500_accessrid(ai, rid, CMD_ACCESS)) != 0) {
+ rc = status;
+ goto done;
+ }
+ // --- now write the rid data
+ if (bap_setup(ai, rid, 0, BAP1) != SUCCESS) {
+ rc = ERROR;
+ goto done;
+ }
+ bap_write(ai, pBuf, len, BAP1);
+ // ---now commit the rid data
+ rc = PC4500_accessrid(ai, rid, 0x100|CMD_ACCESS);
+ }
+done:
+ if (lock)
+ up(&ai->sem);
+ return rc;
+}
+
+/* Allocates a FID to be used for transmitting packets. We only use
+ one for now. */
+static u16 transmit_allocate(struct airo_info *ai, int lenPayload, int raw)
+{
+ unsigned int loop = 3000;
+ Cmd cmd;
+ Resp rsp;
+ u16 txFid;
+ u16 txControl;
+
+ cmd.cmd = CMD_ALLOCATETX;
+ cmd.parm0 = lenPayload;
+ if (down_interruptible(&ai->sem))
+ return ERROR;
+ if (issuecommand(ai, &cmd, &rsp) != SUCCESS) {
+ txFid = ERROR;
+ goto done;
+ }
+ if ( (rsp.status & 0xFF00) != 0) {
+ txFid = ERROR;
+ goto done;
+ }
+ /* wait for the allocate event/indication
+ * It makes me kind of nervous that this can just sit here and spin,
+ * but in practice it only loops like four times. */
+ while (((IN4500(ai, EVSTAT) & EV_ALLOC) == 0) && --loop);
+ if (!loop) {
+ txFid = ERROR;
+ goto done;
+ }
+
+ // get the allocated fid and acknowledge
+ txFid = IN4500(ai, TXALLOCFID);
+ OUT4500(ai, EVACK, EV_ALLOC);
+
+ /* The CARD is pretty cool since it converts the ethernet packet
+ * into 802.11. Also note that we don't release the FID since we
+ * will be using the same one over and over again. */
+ /* We only have to setup the control once since we are not
+ * releasing the fid. */
+ if (raw)
+ txControl = cpu_to_le16(TXCTL_TXOK | TXCTL_TXEX | TXCTL_802_11
+ | TXCTL_ETHERNET | TXCTL_NORELEASE);
+ else
+ txControl = cpu_to_le16(TXCTL_TXOK | TXCTL_TXEX | TXCTL_802_3
+ | TXCTL_ETHERNET | TXCTL_NORELEASE);
+ if (bap_setup(ai, txFid, 0x0008, BAP1) != SUCCESS)
+ txFid = ERROR;
+ else
+ bap_write(ai, &txControl, sizeof(txControl), BAP1);
+
+done:
+ up(&ai->sem);
+
+ return txFid;
+}
+
+/* In general BAP1 is dedicated to transmiting packets. However,
+ since we need a BAP when accessing RIDs, we also use BAP1 for that.
+ Make sure the BAP1 spinlock is held when this is called. */
+static int transmit_802_3_packet(struct airo_info *ai, int len, char *pPacket)
+{
+ u16 payloadLen;
+ Cmd cmd;
+ Resp rsp;
+ int miclen = 0;
+ u16 txFid = len;
+ MICBuffer pMic;
+
+ len >>= 16;
+
+ if (len <= ETH_ALEN * 2) {
+ printk( KERN_WARNING "Short packet %d\n", len );
+ return ERROR;
+ }
+ len -= ETH_ALEN * 2;
+
+#ifdef MICSUPPORT
+ if (test_bit(FLAG_MIC_CAPABLE, &ai->flags) && ai->micstats.enabled &&
+ (ntohs(((u16 *)pPacket)[6]) != 0x888E)) {
+ if (encapsulate(ai,(etherHead *)pPacket,&pMic,len) != SUCCESS)
+ return ERROR;
+ miclen = sizeof(pMic);
+ }
+#endif
+
+ // packet is destination[6], source[6], payload[len-12]
+ // write the payload length and dst/src/payload
+ if (bap_setup(ai, txFid, 0x0036, BAP1) != SUCCESS) return ERROR;
+ /* The hardware addresses aren't counted as part of the payload, so
+ * we have to subtract the 12 bytes for the addresses off */
+ payloadLen = cpu_to_le16(len + miclen);
+ bap_write(ai, &payloadLen, sizeof(payloadLen),BAP1);
+ bap_write(ai, (const u16*)pPacket, sizeof(etherHead), BAP1);
+ if (miclen)
+ bap_write(ai, (const u16*)&pMic, miclen, BAP1);
+ bap_write(ai, (const u16*)(pPacket + sizeof(etherHead)), len, BAP1);
+ // issue the transmit command
+ memset( &cmd, 0, sizeof( cmd ) );
+ cmd.cmd = CMD_TRANSMIT;
+ cmd.parm0 = txFid;
+ if (issuecommand(ai, &cmd, &rsp) != SUCCESS) return ERROR;
+ if ( (rsp.status & 0xFF00) != 0) return ERROR;
+ return SUCCESS;
+}
+
+static int transmit_802_11_packet(struct airo_info *ai, int len, char *pPacket)
+{
+ u16 fc, payloadLen;
+ Cmd cmd;
+ Resp rsp;
+ int hdrlen;
+ struct {
+ u8 addr4[ETH_ALEN];
+ u16 gaplen;
+ u8 gap[6];
+ } gap;
+ u16 txFid = len;
+ len >>= 16;
+ gap.gaplen = 6;
+
+ fc = le16_to_cpu(*(const u16*)pPacket);
+ switch (fc & 0xc) {
+ case 4:
+ if ((fc & 0xe0) == 0xc0)
+ hdrlen = 10;
+ else
+ hdrlen = 16;
+ break;
+ case 8:
+ if ((fc&0x300)==0x300){
+ hdrlen = 30;
+ break;
+ }
+ default:
+ hdrlen = 24;
+ }
+
+ if (len < hdrlen) {
+ printk( KERN_WARNING "Short packet %d\n", len );
+ return ERROR;
+ }
+
+ /* packet is 802.11 header + payload
+ * write the payload length and dst/src/payload */
+ if (bap_setup(ai, txFid, 6, BAP1) != SUCCESS) return ERROR;
+ /* The 802.11 header aren't counted as part of the payload, so
+ * we have to subtract the header bytes off */
+ payloadLen = cpu_to_le16(len-hdrlen);
+ bap_write(ai, &payloadLen, sizeof(payloadLen),BAP1);
+ if (bap_setup(ai, txFid, 0x0014, BAP1) != SUCCESS) return ERROR;
+ bap_write(ai, (const u16*)pPacket, hdrlen, BAP1);
+ bap_write(ai, hdrlen == 30 ?
+ (const u16*)&gap.gaplen : (const u16*)&gap, 38 - hdrlen, BAP1);
+
+ bap_write(ai, (const u16*)(pPacket + hdrlen), len - hdrlen, BAP1);
+ // issue the transmit command
+ memset( &cmd, 0, sizeof( cmd ) );
+ cmd.cmd = CMD_TRANSMIT;
+ cmd.parm0 = txFid;
+ if (issuecommand(ai, &cmd, &rsp) != SUCCESS) return ERROR;
+ if ( (rsp.status & 0xFF00) != 0) return ERROR;
+ return SUCCESS;
+}
+
+/*
+ * This is the proc_fs routines. It is a bit messier than I would
+ * like! Feel free to clean it up!
+ */
+
+static ssize_t proc_read( struct file *file,
+ char __user *buffer,
+ size_t len,
+ loff_t *offset);
+
+static ssize_t proc_write( struct file *file,
+ const char __user *buffer,
+ size_t len,
+ loff_t *offset );
+static int proc_close( struct inode *inode, struct file *file );
+
+static int proc_stats_open( struct inode *inode, struct file *file );
+static int proc_statsdelta_open( struct inode *inode, struct file *file );
+static int proc_status_open( struct inode *inode, struct file *file );
+static int proc_SSID_open( struct inode *inode, struct file *file );
+static int proc_APList_open( struct inode *inode, struct file *file );
+static int proc_BSSList_open( struct inode *inode, struct file *file );
+static int proc_config_open( struct inode *inode, struct file *file );
+static int proc_wepkey_open( struct inode *inode, struct file *file );
+
+static struct file_operations proc_statsdelta_ops = {
+ .read = proc_read,
+ .open = proc_statsdelta_open,
+ .release = proc_close
+};
+
+static struct file_operations proc_stats_ops = {
+ .read = proc_read,
+ .open = proc_stats_open,
+ .release = proc_close
+};
+
+static struct file_operations proc_status_ops = {
+ .read = proc_read,
+ .open = proc_status_open,
+ .release = proc_close
+};
+
+static struct file_operations proc_SSID_ops = {
+ .read = proc_read,
+ .write = proc_write,
+ .open = proc_SSID_open,
+ .release = proc_close
+};
+
+static struct file_operations proc_BSSList_ops = {
+ .read = proc_read,
+ .write = proc_write,
+ .open = proc_BSSList_open,
+ .release = proc_close
+};
+
+static struct file_operations proc_APList_ops = {
+ .read = proc_read,
+ .write = proc_write,
+ .open = proc_APList_open,
+ .release = proc_close
+};
+
+static struct file_operations proc_config_ops = {
+ .read = proc_read,
+ .write = proc_write,
+ .open = proc_config_open,
+ .release = proc_close
+};
+
+static struct file_operations proc_wepkey_ops = {
+ .read = proc_read,
+ .write = proc_write,
+ .open = proc_wepkey_open,
+ .release = proc_close
+};
+
+static struct proc_dir_entry *airo_entry;
+
+struct proc_data {
+ int release_buffer;
+ int readlen;
+ char *rbuffer;
+ int writelen;
+ int maxwritelen;
+ char *wbuffer;
+ void (*on_close) (struct inode *, struct file *);
+};
+
+#ifndef SETPROC_OPS
+#define SETPROC_OPS(entry, ops) (entry)->proc_fops = &(ops)
+#endif
+
+static int setup_proc_entry( struct net_device *dev,
+ struct airo_info *apriv ) {
+ struct proc_dir_entry *entry;
+ /* First setup the device directory */
+ strcpy(apriv->proc_name,dev->name);
+ apriv->proc_entry = create_proc_entry(apriv->proc_name,
+ S_IFDIR|airo_perm,
+ airo_entry);
+ apriv->proc_entry->uid = proc_uid;
+ apriv->proc_entry->gid = proc_gid;
+ apriv->proc_entry->owner = THIS_MODULE;
+
+ /* Setup the StatsDelta */
+ entry = create_proc_entry("StatsDelta",
+ S_IFREG | (S_IRUGO&proc_perm),
+ apriv->proc_entry);
+ entry->uid = proc_uid;
+ entry->gid = proc_gid;
+ entry->data = dev;
+ entry->owner = THIS_MODULE;
+ SETPROC_OPS(entry, proc_statsdelta_ops);
+
+ /* Setup the Stats */
+ entry = create_proc_entry("Stats",
+ S_IFREG | (S_IRUGO&proc_perm),
+ apriv->proc_entry);
+ entry->uid = proc_uid;
+ entry->gid = proc_gid;
+ entry->data = dev;
+ entry->owner = THIS_MODULE;
+ SETPROC_OPS(entry, proc_stats_ops);
+
+ /* Setup the Status */
+ entry = create_proc_entry("Status",
+ S_IFREG | (S_IRUGO&proc_perm),
+ apriv->proc_entry);
+ entry->uid = proc_uid;
+ entry->gid = proc_gid;
+ entry->data = dev;
+ entry->owner = THIS_MODULE;
+ SETPROC_OPS(entry, proc_status_ops);
+
+ /* Setup the Config */
+ entry = create_proc_entry("Config",
+ S_IFREG | proc_perm,
+ apriv->proc_entry);
+ entry->uid = proc_uid;
+ entry->gid = proc_gid;
+ entry->data = dev;
+ entry->owner = THIS_MODULE;
+ SETPROC_OPS(entry, proc_config_ops);
+
+ /* Setup the SSID */
+ entry = create_proc_entry("SSID",
+ S_IFREG | proc_perm,
+ apriv->proc_entry);
+ entry->uid = proc_uid;
+ entry->gid = proc_gid;
+ entry->data = dev;
+ entry->owner = THIS_MODULE;
+ SETPROC_OPS(entry, proc_SSID_ops);
+
+ /* Setup the APList */
+ entry = create_proc_entry("APList",
+ S_IFREG | proc_perm,
+ apriv->proc_entry);
+ entry->uid = proc_uid;
+ entry->gid = proc_gid;
+ entry->data = dev;
+ entry->owner = THIS_MODULE;
+ SETPROC_OPS(entry, proc_APList_ops);
+
+ /* Setup the BSSList */
+ entry = create_proc_entry("BSSList",
+ S_IFREG | proc_perm,
+ apriv->proc_entry);
+ entry->uid = proc_uid;
+ entry->gid = proc_gid;
+ entry->data = dev;
+ entry->owner = THIS_MODULE;
+ SETPROC_OPS(entry, proc_BSSList_ops);
+
+ /* Setup the WepKey */
+ entry = create_proc_entry("WepKey",
+ S_IFREG | proc_perm,
+ apriv->proc_entry);
+ entry->uid = proc_uid;
+ entry->gid = proc_gid;
+ entry->data = dev;
+ entry->owner = THIS_MODULE;
+ SETPROC_OPS(entry, proc_wepkey_ops);
+
+ return 0;
+}
+
+static int takedown_proc_entry( struct net_device *dev,
+ struct airo_info *apriv ) {
+ if ( !apriv->proc_entry->namelen ) return 0;
+ remove_proc_entry("Stats",apriv->proc_entry);
+ remove_proc_entry("StatsDelta",apriv->proc_entry);
+ remove_proc_entry("Status",apriv->proc_entry);
+ remove_proc_entry("Config",apriv->proc_entry);
+ remove_proc_entry("SSID",apriv->proc_entry);
+ remove_proc_entry("APList",apriv->proc_entry);
+ remove_proc_entry("BSSList",apriv->proc_entry);
+ remove_proc_entry("WepKey",apriv->proc_entry);
+ remove_proc_entry(apriv->proc_name,airo_entry);
+ return 0;
+}
+
+/*
+ * What we want from the proc_fs is to be able to efficiently read
+ * and write the configuration. To do this, we want to read the
+ * configuration when the file is opened and write it when the file is
+ * closed. So basically we allocate a read buffer at open and fill it
+ * with data, and allocate a write buffer and read it at close.
+ */
+
+/*
+ * The read routine is generic, it relies on the preallocated rbuffer
+ * to supply the data.
+ */
+static ssize_t proc_read( struct file *file,
+ char __user *buffer,
+ size_t len,
+ loff_t *offset )
+{
+ loff_t pos = *offset;
+ struct proc_data *priv = (struct proc_data*)file->private_data;
+
+ if (!priv->rbuffer)
+ return -EINVAL;
+
+ if (pos < 0)
+ return -EINVAL;
+ if (pos >= priv->readlen)
+ return 0;
+ if (len > priv->readlen - pos)
+ len = priv->readlen - pos;
+ if (copy_to_user(buffer, priv->rbuffer + pos, len))
+ return -EFAULT;
+ *offset = pos + len;
+ return len;
+}
+
+/*
+ * The write routine is generic, it fills in a preallocated rbuffer
+ * to supply the data.
+ */
+static ssize_t proc_write( struct file *file,
+ const char __user *buffer,
+ size_t len,
+ loff_t *offset )
+{
+ loff_t pos = *offset;
+ struct proc_data *priv = (struct proc_data*)file->private_data;
+
+ if (!priv->wbuffer)
+ return -EINVAL;
+
+ if (pos < 0)
+ return -EINVAL;
+ if (pos >= priv->maxwritelen)
+ return 0;
+ if (len > priv->maxwritelen - pos)
+ len = priv->maxwritelen - pos;
+ if (copy_from_user(priv->wbuffer + pos, buffer, len))
+ return -EFAULT;
+ if ( pos + len > priv->writelen )
+ priv->writelen = len + file->f_pos;
+ *offset = pos + len;
+ return len;
+}
+
+static int proc_status_open( struct inode *inode, struct file *file ) {
+ struct proc_data *data;
+ struct proc_dir_entry *dp = PDE(inode);
+ struct net_device *dev = dp->data;
+ struct airo_info *apriv = dev->priv;
+ CapabilityRid cap_rid;
+ StatusRid status_rid;
+ int i;
+
+ if ((file->private_data = kmalloc(sizeof(struct proc_data ), GFP_KERNEL)) == NULL)
+ return -ENOMEM;
+ memset(file->private_data, 0, sizeof(struct proc_data));
+ data = (struct proc_data *)file->private_data;
+ if ((data->rbuffer = kmalloc( 2048, GFP_KERNEL )) == NULL) {
+ kfree (file->private_data);
+ return -ENOMEM;
+ }
+
+ readStatusRid(apriv, &status_rid, 1);
+ readCapabilityRid(apriv, &cap_rid, 1);
+
+ i = sprintf(data->rbuffer, "Status: %s%s%s%s%s%s%s%s%s\n",
+ status_rid.mode & 1 ? "CFG ": "",
+ status_rid.mode & 2 ? "ACT ": "",
+ status_rid.mode & 0x10 ? "SYN ": "",
+ status_rid.mode & 0x20 ? "LNK ": "",
+ status_rid.mode & 0x40 ? "LEAP ": "",
+ status_rid.mode & 0x80 ? "PRIV ": "",
+ status_rid.mode & 0x100 ? "KEY ": "",
+ status_rid.mode & 0x200 ? "WEP ": "",
+ status_rid.mode & 0x8000 ? "ERR ": "");
+ sprintf( data->rbuffer+i, "Mode: %x\n"
+ "Signal Strength: %d\n"
+ "Signal Quality: %d\n"
+ "SSID: %-.*s\n"
+ "AP: %-.16s\n"
+ "Freq: %d\n"
+ "BitRate: %dmbs\n"
+ "Driver Version: %s\n"
+ "Device: %s\nManufacturer: %s\nFirmware Version: %s\n"
+ "Radio type: %x\nCountry: %x\nHardware Version: %x\n"
+ "Software Version: %x\nSoftware Subversion: %x\n"
+ "Boot block version: %x\n",
+ (int)status_rid.mode,
+ (int)status_rid.normalizedSignalStrength,
+ (int)status_rid.signalQuality,
+ (int)status_rid.SSIDlen,
+ status_rid.SSID,
+ status_rid.apName,
+ (int)status_rid.channel,
+ (int)status_rid.currentXmitRate/2,
+ version,
+ cap_rid.prodName,
+ cap_rid.manName,
+ cap_rid.prodVer,
+ cap_rid.radioType,
+ cap_rid.country,
+ cap_rid.hardVer,
+ (int)cap_rid.softVer,
+ (int)cap_rid.softSubVer,
+ (int)cap_rid.bootBlockVer );
+ data->readlen = strlen( data->rbuffer );
+ return 0;
+}
+
+static int proc_stats_rid_open(struct inode*, struct file*, u16);
+static int proc_statsdelta_open( struct inode *inode,
+ struct file *file ) {
+ if (file->f_mode&FMODE_WRITE) {
+ return proc_stats_rid_open(inode, file, RID_STATSDELTACLEAR);
+ }
+ return proc_stats_rid_open(inode, file, RID_STATSDELTA);
+}
+
+static int proc_stats_open( struct inode *inode, struct file *file ) {
+ return proc_stats_rid_open(inode, file, RID_STATS);
+}
+
+static int proc_stats_rid_open( struct inode *inode,
+ struct file *file,
+ u16 rid ) {
+ struct proc_data *data;
+ struct proc_dir_entry *dp = PDE(inode);
+ struct net_device *dev = dp->data;
+ struct airo_info *apriv = dev->priv;
+ StatsRid stats;
+ int i, j;
+ u32 *vals = stats.vals;
+
+ if ((file->private_data = kmalloc(sizeof(struct proc_data ), GFP_KERNEL)) == NULL)
+ return -ENOMEM;
+ memset(file->private_data, 0, sizeof(struct proc_data));
+ data = (struct proc_data *)file->private_data;
+ if ((data->rbuffer = kmalloc( 4096, GFP_KERNEL )) == NULL) {
+ kfree (file->private_data);
+ return -ENOMEM;
+ }
+
+ readStatsRid(apriv, &stats, rid, 1);
+
+ j = 0;
+ for(i=0; statsLabels[i]!=(char *)-1 &&
+ i*4<stats.len; i++){
+ if (!statsLabels[i]) continue;
+ if (j+strlen(statsLabels[i])+16>4096) {
+ printk(KERN_WARNING
+ "airo: Potentially disasterous buffer overflow averted!\n");
+ break;
+ }
+ j+=sprintf(data->rbuffer+j, "%s: %u\n", statsLabels[i], vals[i]);
+ }
+ if (i*4>=stats.len){
+ printk(KERN_WARNING
+ "airo: Got a short rid\n");
+ }
+ data->readlen = j;
+ return 0;
+}
+
+static int get_dec_u16( char *buffer, int *start, int limit ) {
+ u16 value;
+ int valid = 0;
+ for( value = 0; buffer[*start] >= '0' &&
+ buffer[*start] <= '9' &&
+ *start < limit; (*start)++ ) {
+ valid = 1;
+ value *= 10;
+ value += buffer[*start] - '0';
+ }
+ if ( !valid ) return -1;
+ return value;
+}
+
+static int airo_config_commit(struct net_device *dev,
+ struct iw_request_info *info, void *zwrq,
+ char *extra);
+
+static void proc_config_on_close( struct inode *inode, struct file *file ) {
+ struct proc_data *data = file->private_data;
+ struct proc_dir_entry *dp = PDE(inode);
+ struct net_device *dev = dp->data;
+ struct airo_info *ai = dev->priv;
+ char *line;
+
+ if ( !data->writelen ) return;
+
+ readConfigRid(ai, 1);
+ set_bit (FLAG_COMMIT, &ai->flags);
+
+ line = data->wbuffer;
+ while( line[0] ) {
+/*** Mode processing */
+ if ( !strncmp( line, "Mode: ", 6 ) ) {
+ line += 6;
+ if ((ai->config.rmode & 0xff) >= RXMODE_RFMON)
+ set_bit (FLAG_RESET, &ai->flags);
+ ai->config.rmode &= 0xfe00;
+ clear_bit (FLAG_802_11, &ai->flags);
+ ai->config.opmode &= 0xFF00;
+ ai->config.scanMode = SCANMODE_ACTIVE;
+ if ( line[0] == 'a' ) {
+ ai->config.opmode |= 0;
+ } else {
+ ai->config.opmode |= 1;
+ if ( line[0] == 'r' ) {
+ ai->config.rmode |= RXMODE_RFMON | RXMODE_DISABLE_802_3_HEADER;
+ ai->config.scanMode = SCANMODE_PASSIVE;
+ set_bit (FLAG_802_11, &ai->flags);
+ } else if ( line[0] == 'y' ) {
+ ai->config.rmode |= RXMODE_RFMON_ANYBSS | RXMODE_DISABLE_802_3_HEADER;
+ ai->config.scanMode = SCANMODE_PASSIVE;
+ set_bit (FLAG_802_11, &ai->flags);
+ } else if ( line[0] == 'l' )
+ ai->config.rmode |= RXMODE_LANMON;
+ }
+ set_bit (FLAG_COMMIT, &ai->flags);
+ }
+
+/*** Radio status */
+ else if (!strncmp(line,"Radio: ", 7)) {
+ line += 7;
+ if (!strncmp(line,"off",3)) {
+ set_bit (FLAG_RADIO_OFF, &ai->flags);
+ } else {
+ clear_bit (FLAG_RADIO_OFF, &ai->flags);
+ }
+ }
+/*** NodeName processing */
+ else if ( !strncmp( line, "NodeName: ", 10 ) ) {
+ int j;
+
+ line += 10;
+ memset( ai->config.nodeName, 0, 16 );
+/* Do the name, assume a space between the mode and node name */
+ for( j = 0; j < 16 && line[j] != '\n'; j++ ) {
+ ai->config.nodeName[j] = line[j];
+ }
+ set_bit (FLAG_COMMIT, &ai->flags);
+ }
+
+/*** PowerMode processing */
+ else if ( !strncmp( line, "PowerMode: ", 11 ) ) {
+ line += 11;
+ if ( !strncmp( line, "PSPCAM", 6 ) ) {
+ ai->config.powerSaveMode = POWERSAVE_PSPCAM;
+ set_bit (FLAG_COMMIT, &ai->flags);
+ } else if ( !strncmp( line, "PSP", 3 ) ) {
+ ai->config.powerSaveMode = POWERSAVE_PSP;
+ set_bit (FLAG_COMMIT, &ai->flags);
+ } else {
+ ai->config.powerSaveMode = POWERSAVE_CAM;
+ set_bit (FLAG_COMMIT, &ai->flags);
+ }
+ } else if ( !strncmp( line, "DataRates: ", 11 ) ) {
+ int v, i = 0, k = 0; /* i is index into line,
+ k is index to rates */
+
+ line += 11;
+ while((v = get_dec_u16(line, &i, 3))!=-1) {
+ ai->config.rates[k++] = (u8)v;
+ line += i + 1;
+ i = 0;
+ }
+ set_bit (FLAG_COMMIT, &ai->flags);
+ } else if ( !strncmp( line, "Channel: ", 9 ) ) {
+ int v, i = 0;
+ line += 9;
+ v = get_dec_u16(line, &i, i+3);
+ if ( v != -1 ) {
+ ai->config.channelSet = (u16)v;
+ set_bit (FLAG_COMMIT, &ai->flags);
+ }
+ } else if ( !strncmp( line, "XmitPower: ", 11 ) ) {
+ int v, i = 0;
+ line += 11;
+ v = get_dec_u16(line, &i, i+3);
+ if ( v != -1 ) {
+ ai->config.txPower = (u16)v;
+ set_bit (FLAG_COMMIT, &ai->flags);
+ }
+ } else if ( !strncmp( line, "WEP: ", 5 ) ) {
+ line += 5;
+ switch( line[0] ) {
+ case 's':
+ ai->config.authType = (u16)AUTH_SHAREDKEY;
+ break;
+ case 'e':
+ ai->config.authType = (u16)AUTH_ENCRYPT;
+ break;
+ default:
+ ai->config.authType = (u16)AUTH_OPEN;
+ break;
+ }
+ set_bit (FLAG_COMMIT, &ai->flags);
+ } else if ( !strncmp( line, "LongRetryLimit: ", 16 ) ) {
+ int v, i = 0;
+
+ line += 16;
+ v = get_dec_u16(line, &i, 3);
+ v = (v<0) ? 0 : ((v>255) ? 255 : v);
+ ai->config.longRetryLimit = (u16)v;
+ set_bit (FLAG_COMMIT, &ai->flags);
+ } else if ( !strncmp( line, "ShortRetryLimit: ", 17 ) ) {
+ int v, i = 0;
+
+ line += 17;
+ v = get_dec_u16(line, &i, 3);
+ v = (v<0) ? 0 : ((v>255) ? 255 : v);
+ ai->config.shortRetryLimit = (u16)v;
+ set_bit (FLAG_COMMIT, &ai->flags);
+ } else if ( !strncmp( line, "RTSThreshold: ", 14 ) ) {
+ int v, i = 0;
+
+ line += 14;
+ v = get_dec_u16(line, &i, 4);
+ v = (v<0) ? 0 : ((v>2312) ? 2312 : v);
+ ai->config.rtsThres = (u16)v;
+ set_bit (FLAG_COMMIT, &ai->flags);
+ } else if ( !strncmp( line, "TXMSDULifetime: ", 16 ) ) {
+ int v, i = 0;
+
+ line += 16;
+ v = get_dec_u16(line, &i, 5);
+ v = (v<0) ? 0 : v;
+ ai->config.txLifetime = (u16)v;
+ set_bit (FLAG_COMMIT, &ai->flags);
+ } else if ( !strncmp( line, "RXMSDULifetime: ", 16 ) ) {
+ int v, i = 0;
+
+ line += 16;
+ v = get_dec_u16(line, &i, 5);
+ v = (v<0) ? 0 : v;
+ ai->config.rxLifetime = (u16)v;
+ set_bit (FLAG_COMMIT, &ai->flags);
+ } else if ( !strncmp( line, "TXDiversity: ", 13 ) ) {
+ ai->config.txDiversity =
+ (line[13]=='l') ? 1 :
+ ((line[13]=='r')? 2: 3);
+ set_bit (FLAG_COMMIT, &ai->flags);
+ } else if ( !strncmp( line, "RXDiversity: ", 13 ) ) {
+ ai->config.rxDiversity =
+ (line[13]=='l') ? 1 :
+ ((line[13]=='r')? 2: 3);
+ set_bit (FLAG_COMMIT, &ai->flags);
+ } else if ( !strncmp( line, "FragThreshold: ", 15 ) ) {
+ int v, i = 0;
+
+ line += 15;
+ v = get_dec_u16(line, &i, 4);
+ v = (v<256) ? 256 : ((v>2312) ? 2312 : v);
+ v = v & 0xfffe; /* Make sure its even */
+ ai->config.fragThresh = (u16)v;
+ set_bit (FLAG_COMMIT, &ai->flags);
+ } else if (!strncmp(line, "Modulation: ", 12)) {
+ line += 12;
+ switch(*line) {
+ case 'd': ai->config.modulation=MOD_DEFAULT; set_bit(FLAG_COMMIT, &ai->flags); break;
+ case 'c': ai->config.modulation=MOD_CCK; set_bit(FLAG_COMMIT, &ai->flags); break;
+ case 'm': ai->config.modulation=MOD_MOK; set_bit(FLAG_COMMIT, &ai->flags); break;
+ default:
+ printk( KERN_WARNING "airo: Unknown modulation\n" );
+ }
+ } else if (!strncmp(line, "Preamble: ", 10)) {
+ line += 10;
+ switch(*line) {
+ case 'a': ai->config.preamble=PREAMBLE_AUTO; set_bit(FLAG_COMMIT, &ai->flags); break;
+ case 'l': ai->config.preamble=PREAMBLE_LONG; set_bit(FLAG_COMMIT, &ai->flags); break;
+ case 's': ai->config.preamble=PREAMBLE_SHORT; set_bit(FLAG_COMMIT, &ai->flags); break;
+ default: printk(KERN_WARNING "airo: Unknown preamble\n");
+ }
+ } else {
+ printk( KERN_WARNING "Couldn't figure out %s\n", line );
+ }
+ while( line[0] && line[0] != '\n' ) line++;
+ if ( line[0] ) line++;
+ }
+ airo_config_commit(dev, NULL, NULL, NULL);
+}
+
+static char *get_rmode(u16 mode) {
+ switch(mode&0xff) {
+ case RXMODE_RFMON: return "rfmon";
+ case RXMODE_RFMON_ANYBSS: return "yna (any) bss rfmon";
+ case RXMODE_LANMON: return "lanmon";
+ }
+ return "ESS";
+}
+
+static int proc_config_open( struct inode *inode, struct file *file ) {
+ struct proc_data *data;
+ struct proc_dir_entry *dp = PDE(inode);
+ struct net_device *dev = dp->data;
+ struct airo_info *ai = dev->priv;
+ int i;
+
+ if ((file->private_data = kmalloc(sizeof(struct proc_data ), GFP_KERNEL)) == NULL)
+ return -ENOMEM;
+ memset(file->private_data, 0, sizeof(struct proc_data));
+ data = (struct proc_data *)file->private_data;
+ if ((data->rbuffer = kmalloc( 2048, GFP_KERNEL )) == NULL) {
+ kfree (file->private_data);
+ return -ENOMEM;
+ }
+ if ((data->wbuffer = kmalloc( 2048, GFP_KERNEL )) == NULL) {
+ kfree (data->rbuffer);
+ kfree (file->private_data);
+ return -ENOMEM;
+ }
+ memset( data->wbuffer, 0, 2048 );
+ data->maxwritelen = 2048;
+ data->on_close = proc_config_on_close;
+
+ readConfigRid(ai, 1);
+
+ i = sprintf( data->rbuffer,
+ "Mode: %s\n"
+ "Radio: %s\n"
+ "NodeName: %-16s\n"
+ "PowerMode: %s\n"
+ "DataRates: %d %d %d %d %d %d %d %d\n"
+ "Channel: %d\n"
+ "XmitPower: %d\n",
+ (ai->config.opmode & 0xFF) == 0 ? "adhoc" :
+ (ai->config.opmode & 0xFF) == 1 ? get_rmode(ai->config.rmode):
+ (ai->config.opmode & 0xFF) == 2 ? "AP" :
+ (ai->config.opmode & 0xFF) == 3 ? "AP RPTR" : "Error",
+ test_bit(FLAG_RADIO_OFF, &ai->flags) ? "off" : "on",
+ ai->config.nodeName,
+ ai->config.powerSaveMode == 0 ? "CAM" :
+ ai->config.powerSaveMode == 1 ? "PSP" :
+ ai->config.powerSaveMode == 2 ? "PSPCAM" : "Error",
+ (int)ai->config.rates[0],
+ (int)ai->config.rates[1],
+ (int)ai->config.rates[2],
+ (int)ai->config.rates[3],
+ (int)ai->config.rates[4],
+ (int)ai->config.rates[5],
+ (int)ai->config.rates[6],
+ (int)ai->config.rates[7],
+ (int)ai->config.channelSet,
+ (int)ai->config.txPower
+ );
+ sprintf( data->rbuffer + i,
+ "LongRetryLimit: %d\n"
+ "ShortRetryLimit: %d\n"
+ "RTSThreshold: %d\n"
+ "TXMSDULifetime: %d\n"
+ "RXMSDULifetime: %d\n"
+ "TXDiversity: %s\n"
+ "RXDiversity: %s\n"
+ "FragThreshold: %d\n"
+ "WEP: %s\n"
+ "Modulation: %s\n"
+ "Preamble: %s\n",
+ (int)ai->config.longRetryLimit,
+ (int)ai->config.shortRetryLimit,
+ (int)ai->config.rtsThres,
+ (int)ai->config.txLifetime,
+ (int)ai->config.rxLifetime,
+ ai->config.txDiversity == 1 ? "left" :
+ ai->config.txDiversity == 2 ? "right" : "both",
+ ai->config.rxDiversity == 1 ? "left" :
+ ai->config.rxDiversity == 2 ? "right" : "both",
+ (int)ai->config.fragThresh,
+ ai->config.authType == AUTH_ENCRYPT ? "encrypt" :
+ ai->config.authType == AUTH_SHAREDKEY ? "shared" : "open",
+ ai->config.modulation == 0 ? "default" :
+ ai->config.modulation == MOD_CCK ? "cck" :
+ ai->config.modulation == MOD_MOK ? "mok" : "error",
+ ai->config.preamble == PREAMBLE_AUTO ? "auto" :
+ ai->config.preamble == PREAMBLE_LONG ? "long" :
+ ai->config.preamble == PREAMBLE_SHORT ? "short" : "error"
+ );
+ data->readlen = strlen( data->rbuffer );
+ return 0;
+}
+
+static void proc_SSID_on_close( struct inode *inode, struct file *file ) {
+ struct proc_data *data = (struct proc_data *)file->private_data;
+ struct proc_dir_entry *dp = PDE(inode);
+ struct net_device *dev = dp->data;
+ struct airo_info *ai = dev->priv;
+ SsidRid SSID_rid;
+ Resp rsp;
+ int i;
+ int offset = 0;
+
+ if ( !data->writelen ) return;
+
+ memset( &SSID_rid, 0, sizeof( SSID_rid ) );
+
+ for( i = 0; i < 3; i++ ) {
+ int j;
+ for( j = 0; j+offset < data->writelen && j < 32 &&
+ data->wbuffer[offset+j] != '\n'; j++ ) {
+ SSID_rid.ssids[i].ssid[j] = data->wbuffer[offset+j];
+ }
+ if ( j == 0 ) break;
+ SSID_rid.ssids[i].len = j;
+ offset += j;
+ while( data->wbuffer[offset] != '\n' &&
+ offset < data->writelen ) offset++;
+ offset++;
+ }
+ if (i)
+ SSID_rid.len = sizeof(SSID_rid);
+ disable_MAC(ai, 1);
+ writeSsidRid(ai, &SSID_rid, 1);
+ enable_MAC(ai, &rsp, 1);
+}
+
+inline static u8 hexVal(char c) {
+ if (c>='0' && c<='9') return c -= '0';
+ if (c>='a' && c<='f') return c -= 'a'-10;
+ if (c>='A' && c<='F') return c -= 'A'-10;
+ return 0;
+}
+
+static void proc_APList_on_close( struct inode *inode, struct file *file ) {
+ struct proc_data *data = (struct proc_data *)file->private_data;
+ struct proc_dir_entry *dp = PDE(inode);
+ struct net_device *dev = dp->data;
+ struct airo_info *ai = dev->priv;
+ APListRid APList_rid;
+ Resp rsp;
+ int i;
+
+ if ( !data->writelen ) return;
+
+ memset( &APList_rid, 0, sizeof(APList_rid) );
+ APList_rid.len = sizeof(APList_rid);
+
+ for( i = 0; i < 4 && data->writelen >= (i+1)*6*3; i++ ) {
+ int j;
+ for( j = 0; j < 6*3 && data->wbuffer[j+i*6*3]; j++ ) {
+ switch(j%3) {
+ case 0:
+ APList_rid.ap[i][j/3]=
+ hexVal(data->wbuffer[j+i*6*3])<<4;
+ break;
+ case 1:
+ APList_rid.ap[i][j/3]|=
+ hexVal(data->wbuffer[j+i*6*3]);
+ break;
+ }
+ }
+ }
+ disable_MAC(ai, 1);
+ writeAPListRid(ai, &APList_rid, 1);
+ enable_MAC(ai, &rsp, 1);
+}
+
+/* This function wraps PC4500_writerid with a MAC disable */
+static int do_writerid( struct airo_info *ai, u16 rid, const void *rid_data,
+ int len, int dummy ) {
+ int rc;
+ Resp rsp;
+
+ disable_MAC(ai, 1);
+ rc = PC4500_writerid(ai, rid, rid_data, len, 1);
+ enable_MAC(ai, &rsp, 1);
+ return rc;
+}
+
+/* Returns the length of the key at the index. If index == 0xffff
+ * the index of the transmit key is returned. If the key doesn't exist,
+ * -1 will be returned.
+ */
+static int get_wep_key(struct airo_info *ai, u16 index) {
+ WepKeyRid wkr;
+ int rc;
+ u16 lastindex;
+
+ rc = readWepKeyRid(ai, &wkr, 1, 1);
+ if (rc == SUCCESS) do {
+ lastindex = wkr.kindex;
+ if (wkr.kindex == index) {
+ if (index == 0xffff) {
+ return wkr.mac[0];
+ }
+ return wkr.klen;
+ }
+ readWepKeyRid(ai, &wkr, 0, 1);
+ } while(lastindex != wkr.kindex);
+ return -1;
+}
+
+static int set_wep_key(struct airo_info *ai, u16 index,
+ const char *key, u16 keylen, int perm, int lock ) {
+ static const unsigned char macaddr[ETH_ALEN] = { 0x01, 0, 0, 0, 0, 0 };
+ WepKeyRid wkr;
+ Resp rsp;
+
+ memset(&wkr, 0, sizeof(wkr));
+ if (keylen == 0) {
+// We are selecting which key to use
+ wkr.len = sizeof(wkr);
+ wkr.kindex = 0xffff;
+ wkr.mac[0] = (char)index;
+ if (perm) printk(KERN_INFO "Setting transmit key to %d\n", index);
+ if (perm) ai->defindex = (char)index;
+ } else {
+// We are actually setting the key
+ wkr.len = sizeof(wkr);
+ wkr.kindex = index;
+ wkr.klen = keylen;
+ memcpy( wkr.key, key, keylen );
+ memcpy( wkr.mac, macaddr, ETH_ALEN );
+ printk(KERN_INFO "Setting key %d\n", index);
+ }
+
+ disable_MAC(ai, lock);
+ writeWepKeyRid(ai, &wkr, perm, lock);
+ enable_MAC(ai, &rsp, lock);
+ return 0;
+}
+
+static void proc_wepkey_on_close( struct inode *inode, struct file *file ) {
+ struct proc_data *data;
+ struct proc_dir_entry *dp = PDE(inode);
+ struct net_device *dev = dp->data;
+ struct airo_info *ai = dev->priv;
+ int i;
+ char key[16];
+ u16 index = 0;
+ int j = 0;
+
+ memset(key, 0, sizeof(key));
+
+ data = (struct proc_data *)file->private_data;
+ if ( !data->writelen ) return;
+
+ if (data->wbuffer[0] >= '0' && data->wbuffer[0] <= '3' &&
+ (data->wbuffer[1] == ' ' || data->wbuffer[1] == '\n')) {
+ index = data->wbuffer[0] - '0';
+ if (data->wbuffer[1] == '\n') {
+ set_wep_key(ai, index, NULL, 0, 1, 1);
+ return;
+ }
+ j = 2;
+ } else {
+ printk(KERN_ERR "airo: WepKey passed invalid key index\n");
+ return;
+ }
+
+ for( i = 0; i < 16*3 && data->wbuffer[i+j]; i++ ) {
+ switch(i%3) {
+ case 0:
+ key[i/3] = hexVal(data->wbuffer[i+j])<<4;
+ break;
+ case 1:
+ key[i/3] |= hexVal(data->wbuffer[i+j]);
+ break;
+ }
+ }
+ set_wep_key(ai, index, key, i/3, 1, 1);
+}
+
+static int proc_wepkey_open( struct inode *inode, struct file *file ) {
+ struct proc_data *data;
+ struct proc_dir_entry *dp = PDE(inode);
+ struct net_device *dev = dp->data;
+ struct airo_info *ai = dev->priv;
+ char *ptr;
+ WepKeyRid wkr;
+ u16 lastindex;
+ int j=0;
+ int rc;
+
+ if ((file->private_data = kmalloc(sizeof(struct proc_data ), GFP_KERNEL)) == NULL)
+ return -ENOMEM;
+ memset(file->private_data, 0, sizeof(struct proc_data));
+ memset(&wkr, 0, sizeof(wkr));
+ data = (struct proc_data *)file->private_data;
+ if ((data->rbuffer = kmalloc( 180, GFP_KERNEL )) == NULL) {
+ kfree (file->private_data);
+ return -ENOMEM;
+ }
+ memset(data->rbuffer, 0, 180);
+ data->writelen = 0;
+ data->maxwritelen = 80;
+ if ((data->wbuffer = kmalloc( 80, GFP_KERNEL )) == NULL) {
+ kfree (data->rbuffer);
+ kfree (file->private_data);
+ return -ENOMEM;
+ }
+ memset( data->wbuffer, 0, 80 );
+ data->on_close = proc_wepkey_on_close;
+
+ ptr = data->rbuffer;
+ strcpy(ptr, "No wep keys\n");
+ rc = readWepKeyRid(ai, &wkr, 1, 1);
+ if (rc == SUCCESS) do {
+ lastindex = wkr.kindex;
+ if (wkr.kindex == 0xffff) {
+ j += sprintf(ptr+j, "Tx key = %d\n",
+ (int)wkr.mac[0]);
+ } else {
+ j += sprintf(ptr+j, "Key %d set with length = %d\n",
+ (int)wkr.kindex, (int)wkr.klen);
+ }
+ readWepKeyRid(ai, &wkr, 0, 1);
+ } while((lastindex != wkr.kindex) && (j < 180-30));
+
+ data->readlen = strlen( data->rbuffer );
+ return 0;
+}
+
+static int proc_SSID_open( struct inode *inode, struct file *file ) {
+ struct proc_data *data;
+ struct proc_dir_entry *dp = PDE(inode);
+ struct net_device *dev = dp->data;
+ struct airo_info *ai = dev->priv;
+ int i;
+ char *ptr;
+ SsidRid SSID_rid;
+
+ if ((file->private_data = kmalloc(sizeof(struct proc_data ), GFP_KERNEL)) == NULL)
+ return -ENOMEM;
+ memset(file->private_data, 0, sizeof(struct proc_data));
+ data = (struct proc_data *)file->private_data;
+ if ((data->rbuffer = kmalloc( 104, GFP_KERNEL )) == NULL) {
+ kfree (file->private_data);
+ return -ENOMEM;
+ }
+ data->writelen = 0;
+ data->maxwritelen = 33*3;
+ if ((data->wbuffer = kmalloc( 33*3, GFP_KERNEL )) == NULL) {
+ kfree (data->rbuffer);
+ kfree (file->private_data);
+ return -ENOMEM;
+ }
+ memset( data->wbuffer, 0, 33*3 );
+ data->on_close = proc_SSID_on_close;
+
+ readSsidRid(ai, &SSID_rid);
+ ptr = data->rbuffer;
+ for( i = 0; i < 3; i++ ) {
+ int j;
+ if ( !SSID_rid.ssids[i].len ) break;
+ for( j = 0; j < 32 &&
+ j < SSID_rid.ssids[i].len &&
+ SSID_rid.ssids[i].ssid[j]; j++ ) {
+ *ptr++ = SSID_rid.ssids[i].ssid[j];
+ }
+ *ptr++ = '\n';
+ }
+ *ptr = '\0';
+ data->readlen = strlen( data->rbuffer );
+ return 0;
+}
+
+static int proc_APList_open( struct inode *inode, struct file *file ) {
+ struct proc_data *data;
+ struct proc_dir_entry *dp = PDE(inode);
+ struct net_device *dev = dp->data;
+ struct airo_info *ai = dev->priv;
+ int i;
+ char *ptr;
+ APListRid APList_rid;
+
+ if ((file->private_data = kmalloc(sizeof(struct proc_data ), GFP_KERNEL)) == NULL)
+ return -ENOMEM;
+ memset(file->private_data, 0, sizeof(struct proc_data));
+ data = (struct proc_data *)file->private_data;
+ if ((data->rbuffer = kmalloc( 104, GFP_KERNEL )) == NULL) {
+ kfree (file->private_data);
+ return -ENOMEM;
+ }
+ data->writelen = 0;
+ data->maxwritelen = 4*6*3;
+ if ((data->wbuffer = kmalloc( data->maxwritelen, GFP_KERNEL )) == NULL) {
+ kfree (data->rbuffer);
+ kfree (file->private_data);
+ return -ENOMEM;
+ }
+ memset( data->wbuffer, 0, data->maxwritelen );
+ data->on_close = proc_APList_on_close;
+
+ readAPListRid(ai, &APList_rid);
+ ptr = data->rbuffer;
+ for( i = 0; i < 4; i++ ) {
+// We end when we find a zero MAC
+ if ( !*(int*)APList_rid.ap[i] &&
+ !*(int*)&APList_rid.ap[i][2]) break;
+ ptr += sprintf(ptr, "%02x:%02x:%02x:%02x:%02x:%02x\n",
+ (int)APList_rid.ap[i][0],
+ (int)APList_rid.ap[i][1],
+ (int)APList_rid.ap[i][2],
+ (int)APList_rid.ap[i][3],
+ (int)APList_rid.ap[i][4],
+ (int)APList_rid.ap[i][5]);
+ }
+ if (i==0) ptr += sprintf(ptr, "Not using specific APs\n");
+
+ *ptr = '\0';
+ data->readlen = strlen( data->rbuffer );
+ return 0;
+}
+
+static int proc_BSSList_open( struct inode *inode, struct file *file ) {
+ struct proc_data *data;
+ struct proc_dir_entry *dp = PDE(inode);
+ struct net_device *dev = dp->data;
+ struct airo_info *ai = dev->priv;
+ char *ptr;
+ BSSListRid BSSList_rid;
+ int rc;
+ /* If doLoseSync is not 1, we won't do a Lose Sync */
+ int doLoseSync = -1;
+
+ if ((file->private_data = kmalloc(sizeof(struct proc_data ), GFP_KERNEL)) == NULL)
+ return -ENOMEM;
+ memset(file->private_data, 0, sizeof(struct proc_data));
+ data = (struct proc_data *)file->private_data;
+ if ((data->rbuffer = kmalloc( 1024, GFP_KERNEL )) == NULL) {
+ kfree (file->private_data);
+ return -ENOMEM;
+ }
+ data->writelen = 0;
+ data->maxwritelen = 0;
+ data->wbuffer = NULL;
+ data->on_close = NULL;
+
+ if (file->f_mode & FMODE_WRITE) {
+ if (!(file->f_mode & FMODE_READ)) {
+ Cmd cmd;
+ Resp rsp;
+
+ if (ai->flags & FLAG_RADIO_MASK) return -ENETDOWN;
+ memset(&cmd, 0, sizeof(cmd));
+ cmd.cmd=CMD_LISTBSS;
+ if (down_interruptible(&ai->sem))
+ return -ERESTARTSYS;
+ issuecommand(ai, &cmd, &rsp);
+ up(&ai->sem);
+ data->readlen = 0;
+ return 0;
+ }
+ doLoseSync = 1;
+ }
+ ptr = data->rbuffer;
+ /* There is a race condition here if there are concurrent opens.
+ Since it is a rare condition, we'll just live with it, otherwise
+ we have to add a spin lock... */
+ rc = readBSSListRid(ai, doLoseSync, &BSSList_rid);
+ while(rc == 0 && BSSList_rid.index != 0xffff) {
+ ptr += sprintf(ptr, "%02x:%02x:%02x:%02x:%02x:%02x %*s rssi = %d",
+ (int)BSSList_rid.bssid[0],
+ (int)BSSList_rid.bssid[1],
+ (int)BSSList_rid.bssid[2],
+ (int)BSSList_rid.bssid[3],
+ (int)BSSList_rid.bssid[4],
+ (int)BSSList_rid.bssid[5],
+ (int)BSSList_rid.ssidLen,
+ BSSList_rid.ssid,
+ (int)BSSList_rid.rssi);
+ ptr += sprintf(ptr, " channel = %d %s %s %s %s\n",
+ (int)BSSList_rid.dsChannel,
+ BSSList_rid.cap & CAP_ESS ? "ESS" : "",
+ BSSList_rid.cap & CAP_IBSS ? "adhoc" : "",
+ BSSList_rid.cap & CAP_PRIVACY ? "wep" : "",
+ BSSList_rid.cap & CAP_SHORTHDR ? "shorthdr" : "");
+ rc = readBSSListRid(ai, 0, &BSSList_rid);
+ }
+ *ptr = '\0';
+ data->readlen = strlen( data->rbuffer );
+ return 0;
+}
+
+static int proc_close( struct inode *inode, struct file *file )
+{
+ struct proc_data *data = (struct proc_data *)file->private_data;
+ if ( data->on_close != NULL ) data->on_close( inode, file );
+ if ( data->rbuffer ) kfree( data->rbuffer );
+ if ( data->wbuffer ) kfree( data->wbuffer );
+ kfree( data );
+ return 0;
+}
+
+static struct net_device_list {
+ struct net_device *dev;
+ struct net_device_list *next;
+} *airo_devices;
+
+/* Since the card doesn't automatically switch to the right WEP mode,
+ we will make it do it. If the card isn't associated, every secs we
+ will switch WEP modes to see if that will help. If the card is
+ associated we will check every minute to see if anything has
+ changed. */
+static void timer_func( struct net_device *dev ) {
+ struct airo_info *apriv = dev->priv;
+ Resp rsp;
+
+/* We don't have a link so try changing the authtype */
+ readConfigRid(apriv, 0);
+ disable_MAC(apriv, 0);
+ switch(apriv->config.authType) {
+ case AUTH_ENCRYPT:
+/* So drop to OPEN */
+ apriv->config.authType = AUTH_OPEN;
+ break;
+ case AUTH_SHAREDKEY:
+ if (apriv->keyindex < auto_wep) {
+ set_wep_key(apriv, apriv->keyindex, NULL, 0, 0, 0);
+ apriv->config.authType = AUTH_SHAREDKEY;
+ apriv->keyindex++;
+ } else {
+ /* Drop to ENCRYPT */
+ apriv->keyindex = 0;
+ set_wep_key(apriv, apriv->defindex, NULL, 0, 0, 0);
+ apriv->config.authType = AUTH_ENCRYPT;
+ }
+ break;
+ default: /* We'll escalate to SHAREDKEY */
+ apriv->config.authType = AUTH_SHAREDKEY;
+ }
+ set_bit (FLAG_COMMIT, &apriv->flags);
+ writeConfigRid(apriv, 0);
+ enable_MAC(apriv, &rsp, 0);
+ up(&apriv->sem);
+
+/* Schedule check to see if the change worked */
+ clear_bit(JOB_AUTOWEP, &apriv->flags);
+ apriv->expires = RUN_AT(HZ*3);
+}
+
+static int add_airo_dev( struct net_device *dev ) {
+ struct net_device_list *node = kmalloc( sizeof( *node ), GFP_KERNEL );
+ if ( !node )
+ return -ENOMEM;
+
+ node->dev = dev;
+ node->next = airo_devices;
+ airo_devices = node;
+
+ return 0;
+}
+
+static void del_airo_dev( struct net_device *dev ) {
+ struct net_device_list **p = &airo_devices;
+ while( *p && ( (*p)->dev != dev ) )
+ p = &(*p)->next;
+ if ( *p && (*p)->dev == dev )
+ *p = (*p)->next;
+}
+
+#ifdef CONFIG_PCI
+static int __devinit airo_pci_probe(struct pci_dev *pdev,
+ const struct pci_device_id *pent)
+{
+ struct net_device *dev;
+
+ if (pci_enable_device(pdev))
+ return -ENODEV;
+ pci_set_master(pdev);
+
+ if (pdev->device == 0x5000 || pdev->device == 0xa504)
+ dev = _init_airo_card(pdev->irq, pdev->resource[0].start, 0, pdev, &pdev->dev);
+ else
+ dev = _init_airo_card(pdev->irq, pdev->resource[2].start, 0, pdev, &pdev->dev);
+ if (!dev)
+ return -ENODEV;
+
+ pci_set_drvdata(pdev, dev);
+ return 0;
+}
+
+static void __devexit airo_pci_remove(struct pci_dev *pdev)
+{
+}
+
+static int airo_pci_suspend(struct pci_dev *pdev, u32 state)
+{
+ struct net_device *dev = pci_get_drvdata(pdev);
+ struct airo_info *ai = dev->priv;
+ Cmd cmd;
+ Resp rsp;
+
+ if ((ai->APList == NULL) &&
+ (ai->APList = kmalloc(sizeof(APListRid), GFP_KERNEL)) == NULL)
+ return -ENOMEM;
+ if ((ai->SSID == NULL) &&
+ (ai->SSID = kmalloc(sizeof(SsidRid), GFP_KERNEL)) == NULL)
+ return -ENOMEM;
+ readAPListRid(ai, ai->APList);
+ readSsidRid(ai, ai->SSID);
+ memset(&cmd, 0, sizeof(cmd));
+ /* the lock will be released at the end of the resume callback */
+ if (down_interruptible(&ai->sem))
+ return -EAGAIN;
+ disable_MAC(ai, 0);
+ netif_device_detach(dev);
+ ai->power = state;
+ cmd.cmd=HOSTSLEEP;
+ issuecommand(ai, &cmd, &rsp);
+
+ pci_enable_wake(pdev, state, 1);
+ pci_save_state(pdev);
+ return pci_set_power_state(pdev, state);
+}
+
+static int airo_pci_resume(struct pci_dev *pdev)
+{
+ struct net_device *dev = pci_get_drvdata(pdev);
+ struct airo_info *ai = dev->priv;
+ Resp rsp;
+
+ pci_set_power_state(pdev, 0);
+ pci_restore_state(pdev);
+ pci_enable_wake(pdev, ai->power, 0);
+
+ if (ai->power > 1) {
+ reset_card(dev, 0);
+ mpi_init_descriptors(ai);
+ setup_card(ai, dev->dev_addr, 0);
+ clear_bit(FLAG_RADIO_OFF, &ai->flags);
+ clear_bit(FLAG_PENDING_XMIT, &ai->flags);
+ } else {
+ OUT4500(ai, EVACK, EV_AWAKEN);
+ OUT4500(ai, EVACK, EV_AWAKEN);
+ msleep(100);
+ }
+
+ set_bit (FLAG_COMMIT, &ai->flags);
+ disable_MAC(ai, 0);
+ msleep(200);
+ if (ai->SSID) {
+ writeSsidRid(ai, ai->SSID, 0);
+ kfree(ai->SSID);
+ ai->SSID = NULL;
+ }
+ if (ai->APList) {
+ writeAPListRid(ai, ai->APList, 0);
+ kfree(ai->APList);
+ ai->APList = NULL;
+ }
+ writeConfigRid(ai, 0);
+ enable_MAC(ai, &rsp, 0);
+ ai->power = 0;
+ netif_device_attach(dev);
+ netif_wake_queue(dev);
+ enable_interrupts(ai);
+ up(&ai->sem);
+ return 0;
+}
+#endif
+
+static int __init airo_init_module( void )
+{
+ int i, have_isa_dev = 0;
+
+ airo_entry = create_proc_entry("aironet",
+ S_IFDIR | airo_perm,
+ proc_root_driver);
+ airo_entry->uid = proc_uid;
+ airo_entry->gid = proc_gid;
+
+ for( i = 0; i < 4 && io[i] && irq[i]; i++ ) {
+ printk( KERN_INFO
+ "airo: Trying to configure ISA adapter at irq=%d io=0x%x\n",
+ irq[i], io[i] );
+ if (init_airo_card( irq[i], io[i], 0, NULL ))
+ have_isa_dev = 1;
+ }
+
+#ifdef CONFIG_PCI
+ printk( KERN_INFO "airo: Probing for PCI adapters\n" );
+ pci_register_driver(&airo_driver);
+ printk( KERN_INFO "airo: Finished probing for PCI adapters\n" );
+#endif
+
+ /* Always exit with success, as we are a library module
+ * as well as a driver module
+ */
+ return 0;
+}
+
+static void __exit airo_cleanup_module( void )
+{
+ while( airo_devices ) {
+ printk( KERN_INFO "airo: Unregistering %s\n", airo_devices->dev->name );
+ stop_airo_card( airo_devices->dev, 1 );
+ }
+#ifdef CONFIG_PCI
+ pci_unregister_driver(&airo_driver);
+#endif
+ remove_proc_entry("aironet", proc_root_driver);
+}
+
+#ifdef WIRELESS_EXT
+/*
+ * Initial Wireless Extension code for Aironet driver by :
+ * Jean Tourrilhes <jt@hpl.hp.com> - HPL - 17 November 00
+ * Conversion to new driver API by :
+ * Jean Tourrilhes <jt@hpl.hp.com> - HPL - 26 March 02
+ * Javier also did a good amount of work here, adding some new extensions
+ * and fixing my code. Let's just say that without him this code just
+ * would not work at all... - Jean II
+ */
+
+static int airo_get_quality (StatusRid *status_rid, CapabilityRid *cap_rid)
+{
+ int quality = 0;
+
+ if ((status_rid->mode & 0x3f) == 0x3f && (cap_rid->hardCap & 8)) {
+ if (memcmp(cap_rid->prodName, "350", 3))
+ if (status_rid->signalQuality > 0x20)
+ quality = 0;
+ else
+ quality = 0x20 - status_rid->signalQuality;
+ else
+ if (status_rid->signalQuality > 0xb0)
+ quality = 0;
+ else if (status_rid->signalQuality < 0x10)
+ quality = 0xa0;
+ else
+ quality = 0xb0 - status_rid->signalQuality;
+ }
+ return quality;
+}
+
+#define airo_get_max_quality(cap_rid) (memcmp((cap_rid)->prodName, "350", 3) ? 0x20 : 0xa0)
+#define airo_get_avg_quality(cap_rid) (memcmp((cap_rid)->prodName, "350", 3) ? 0x10 : 0x50);
+
+/*------------------------------------------------------------------*/
+/*
+ * Wireless Handler : get protocol name
+ */
+static int airo_get_name(struct net_device *dev,
+ struct iw_request_info *info,
+ char *cwrq,
+ char *extra)
+{
+ strcpy(cwrq, "IEEE 802.11-DS");
+ return 0;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Wireless Handler : set frequency
+ */
+static int airo_set_freq(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_freq *fwrq,
+ char *extra)
+{
+ struct airo_info *local = dev->priv;
+ int rc = -EINPROGRESS; /* Call commit handler */
+
+ /* If setting by frequency, convert to a channel */
+ if((fwrq->e == 1) &&
+ (fwrq->m >= (int) 2.412e8) &&
+ (fwrq->m <= (int) 2.487e8)) {
+ int f = fwrq->m / 100000;
+ int c = 0;
+ while((c < 14) && (f != frequency_list[c]))
+ c++;
+ /* Hack to fall through... */
+ fwrq->e = 0;
+ fwrq->m = c + 1;
+ }
+ /* Setting by channel number */
+ if((fwrq->m > 1000) || (fwrq->e > 0))
+ rc = -EOPNOTSUPP;
+ else {
+ int channel = fwrq->m;
+ /* We should do a better check than that,
+ * based on the card capability !!! */
+ if((channel < 1) || (channel > 16)) {
+ printk(KERN_DEBUG "%s: New channel value of %d is invalid!\n", dev->name, fwrq->m);
+ rc = -EINVAL;
+ } else {
+ readConfigRid(local, 1);
+ /* Yes ! We can set it !!! */
+ local->config.channelSet = (u16)(channel - 1);
+ set_bit (FLAG_COMMIT, &local->flags);
+ }
+ }
+ return rc;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Wireless Handler : get frequency
+ */
+static int airo_get_freq(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_freq *fwrq,
+ char *extra)
+{
+ struct airo_info *local = dev->priv;
+ StatusRid status_rid; /* Card status info */
+
+ readConfigRid(local, 1);
+ if ((local->config.opmode & 0xFF) == MODE_STA_ESS)
+ status_rid.channel = local->config.channelSet;
+ else
+ readStatusRid(local, &status_rid, 1);
+
+#ifdef WEXT_USECHANNELS
+ fwrq->m = ((int)status_rid.channel) + 1;
+ fwrq->e = 0;
+#else
+ {
+ int f = (int)status_rid.channel;
+ fwrq->m = frequency_list[f] * 100000;
+ fwrq->e = 1;
+ }
+#endif
+
+ return 0;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Wireless Handler : set ESSID
+ */
+static int airo_set_essid(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_point *dwrq,
+ char *extra)
+{
+ struct airo_info *local = dev->priv;
+ Resp rsp;
+ SsidRid SSID_rid; /* SSIDs */
+
+ /* Reload the list of current SSID */
+ readSsidRid(local, &SSID_rid);
+
+ /* Check if we asked for `any' */
+ if(dwrq->flags == 0) {
+ /* Just send an empty SSID list */
+ memset(&SSID_rid, 0, sizeof(SSID_rid));
+ } else {
+ int index = (dwrq->flags & IW_ENCODE_INDEX) - 1;
+
+ /* Check the size of the string */
+ if(dwrq->length > IW_ESSID_MAX_SIZE+1) {
+ return -E2BIG ;
+ }
+ /* Check if index is valid */
+ if((index < 0) || (index >= 4)) {
+ return -EINVAL;
+ }
+
+ /* Set the SSID */
+ memset(SSID_rid.ssids[index].ssid, 0,
+ sizeof(SSID_rid.ssids[index].ssid));
+ memcpy(SSID_rid.ssids[index].ssid, extra, dwrq->length);
+ SSID_rid.ssids[index].len = dwrq->length - 1;
+ }
+ SSID_rid.len = sizeof(SSID_rid);
+ /* Write it to the card */
+ disable_MAC(local, 1);
+ writeSsidRid(local, &SSID_rid, 1);
+ enable_MAC(local, &rsp, 1);
+
+ return 0;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Wireless Handler : get ESSID
+ */
+static int airo_get_essid(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_point *dwrq,
+ char *extra)
+{
+ struct airo_info *local = dev->priv;
+ StatusRid status_rid; /* Card status info */
+
+ readStatusRid(local, &status_rid, 1);
+
+ /* Note : if dwrq->flags != 0, we should
+ * get the relevant SSID from the SSID list... */
+
+ /* Get the current SSID */
+ memcpy(extra, status_rid.SSID, status_rid.SSIDlen);
+ extra[status_rid.SSIDlen] = '\0';
+ /* If none, we may want to get the one that was set */
+
+ /* Push it out ! */
+ dwrq->length = status_rid.SSIDlen + 1;
+ dwrq->flags = 1; /* active */
+
+ return 0;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Wireless Handler : set AP address
+ */
+static int airo_set_wap(struct net_device *dev,
+ struct iw_request_info *info,
+ struct sockaddr *awrq,
+ char *extra)
+{
+ struct airo_info *local = dev->priv;
+ Cmd cmd;
+ Resp rsp;
+ APListRid APList_rid;
+ static const unsigned char bcast[ETH_ALEN] = { 255, 255, 255, 255, 255, 255 };
+
+ if (awrq->sa_family != ARPHRD_ETHER)
+ return -EINVAL;
+ else if (!memcmp(bcast, awrq->sa_data, ETH_ALEN)) {
+ memset(&cmd, 0, sizeof(cmd));
+ cmd.cmd=CMD_LOSE_SYNC;
+ if (down_interruptible(&local->sem))
+ return -ERESTARTSYS;
+ issuecommand(local, &cmd, &rsp);
+ up(&local->sem);
+ } else {
+ memset(&APList_rid, 0, sizeof(APList_rid));
+ APList_rid.len = sizeof(APList_rid);
+ memcpy(APList_rid.ap[0], awrq->sa_data, ETH_ALEN);
+ disable_MAC(local, 1);
+ writeAPListRid(local, &APList_rid, 1);
+ enable_MAC(local, &rsp, 1);
+ }
+ return 0;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Wireless Handler : get AP address
+ */
+static int airo_get_wap(struct net_device *dev,
+ struct iw_request_info *info,
+ struct sockaddr *awrq,
+ char *extra)
+{
+ struct airo_info *local = dev->priv;
+ StatusRid status_rid; /* Card status info */
+
+ readStatusRid(local, &status_rid, 1);
+
+ /* Tentative. This seems to work, wow, I'm lucky !!! */
+ memcpy(awrq->sa_data, status_rid.bssid[0], ETH_ALEN);
+ awrq->sa_family = ARPHRD_ETHER;
+
+ return 0;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Wireless Handler : set Nickname
+ */
+static int airo_set_nick(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_point *dwrq,
+ char *extra)
+{
+ struct airo_info *local = dev->priv;
+
+ /* Check the size of the string */
+ if(dwrq->length > 16 + 1) {
+ return -E2BIG;
+ }
+ readConfigRid(local, 1);
+ memset(local->config.nodeName, 0, sizeof(local->config.nodeName));
+ memcpy(local->config.nodeName, extra, dwrq->length);
+ set_bit (FLAG_COMMIT, &local->flags);
+
+ return -EINPROGRESS; /* Call commit handler */
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Wireless Handler : get Nickname
+ */
+static int airo_get_nick(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_point *dwrq,
+ char *extra)
+{
+ struct airo_info *local = dev->priv;
+
+ readConfigRid(local, 1);
+ strncpy(extra, local->config.nodeName, 16);
+ extra[16] = '\0';
+ dwrq->length = strlen(extra) + 1;
+
+ return 0;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Wireless Handler : set Bit-Rate
+ */
+static int airo_set_rate(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *vwrq,
+ char *extra)
+{
+ struct airo_info *local = dev->priv;
+ CapabilityRid cap_rid; /* Card capability info */
+ u8 brate = 0;
+ int i;
+
+ /* First : get a valid bit rate value */
+ readCapabilityRid(local, &cap_rid, 1);
+
+ /* Which type of value ? */
+ if((vwrq->value < 8) && (vwrq->value >= 0)) {
+ /* Setting by rate index */
+ /* Find value in the magic rate table */
+ brate = cap_rid.supportedRates[vwrq->value];
+ } else {
+ /* Setting by frequency value */
+ u8 normvalue = (u8) (vwrq->value/500000);
+
+ /* Check if rate is valid */
+ for(i = 0 ; i < 8 ; i++) {
+ if(normvalue == cap_rid.supportedRates[i]) {
+ brate = normvalue;
+ break;
+ }
+ }
+ }
+ /* -1 designed the max rate (mostly auto mode) */
+ if(vwrq->value == -1) {
+ /* Get the highest available rate */
+ for(i = 0 ; i < 8 ; i++) {
+ if(cap_rid.supportedRates[i] == 0)
+ break;
+ }
+ if(i != 0)
+ brate = cap_rid.supportedRates[i - 1];
+ }
+ /* Check that it is valid */
+ if(brate == 0) {
+ return -EINVAL;
+ }
+
+ readConfigRid(local, 1);
+ /* Now, check if we want a fixed or auto value */
+ if(vwrq->fixed == 0) {
+ /* Fill all the rates up to this max rate */
+ memset(local->config.rates, 0, 8);
+ for(i = 0 ; i < 8 ; i++) {
+ local->config.rates[i] = cap_rid.supportedRates[i];
+ if(local->config.rates[i] == brate)
+ break;
+ }
+ } else {
+ /* Fixed mode */
+ /* One rate, fixed */
+ memset(local->config.rates, 0, 8);
+ local->config.rates[0] = brate;
+ }
+ set_bit (FLAG_COMMIT, &local->flags);
+
+ return -EINPROGRESS; /* Call commit handler */
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Wireless Handler : get Bit-Rate
+ */
+static int airo_get_rate(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *vwrq,
+ char *extra)
+{
+ struct airo_info *local = dev->priv;
+ StatusRid status_rid; /* Card status info */
+
+ readStatusRid(local, &status_rid, 1);
+
+ vwrq->value = status_rid.currentXmitRate * 500000;
+ /* If more than one rate, set auto */
+ readConfigRid(local, 1);
+ vwrq->fixed = (local->config.rates[1] == 0);
+
+ return 0;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Wireless Handler : set RTS threshold
+ */
+static int airo_set_rts(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *vwrq,
+ char *extra)
+{
+ struct airo_info *local = dev->priv;
+ int rthr = vwrq->value;
+
+ if(vwrq->disabled)
+ rthr = 2312;
+ if((rthr < 0) || (rthr > 2312)) {
+ return -EINVAL;
+ }
+ readConfigRid(local, 1);
+ local->config.rtsThres = rthr;
+ set_bit (FLAG_COMMIT, &local->flags);
+
+ return -EINPROGRESS; /* Call commit handler */
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Wireless Handler : get RTS threshold
+ */
+static int airo_get_rts(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *vwrq,
+ char *extra)
+{
+ struct airo_info *local = dev->priv;
+
+ readConfigRid(local, 1);
+ vwrq->value = local->config.rtsThres;
+ vwrq->disabled = (vwrq->value >= 2312);
+ vwrq->fixed = 1;
+
+ return 0;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Wireless Handler : set Fragmentation threshold
+ */
+static int airo_set_frag(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *vwrq,
+ char *extra)
+{
+ struct airo_info *local = dev->priv;
+ int fthr = vwrq->value;
+
+ if(vwrq->disabled)
+ fthr = 2312;
+ if((fthr < 256) || (fthr > 2312)) {
+ return -EINVAL;
+ }
+ fthr &= ~0x1; /* Get an even value - is it really needed ??? */
+ readConfigRid(local, 1);
+ local->config.fragThresh = (u16)fthr;
+ set_bit (FLAG_COMMIT, &local->flags);
+
+ return -EINPROGRESS; /* Call commit handler */
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Wireless Handler : get Fragmentation threshold
+ */
+static int airo_get_frag(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *vwrq,
+ char *extra)
+{
+ struct airo_info *local = dev->priv;
+
+ readConfigRid(local, 1);
+ vwrq->value = local->config.fragThresh;
+ vwrq->disabled = (vwrq->value >= 2312);
+ vwrq->fixed = 1;
+
+ return 0;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Wireless Handler : set Mode of Operation
+ */
+static int airo_set_mode(struct net_device *dev,
+ struct iw_request_info *info,
+ __u32 *uwrq,
+ char *extra)
+{
+ struct airo_info *local = dev->priv;
+ int reset = 0;
+
+ readConfigRid(local, 1);
+ if ((local->config.rmode & 0xff) >= RXMODE_RFMON)
+ reset = 1;
+
+ switch(*uwrq) {
+ case IW_MODE_ADHOC:
+ local->config.opmode &= 0xFF00;
+ local->config.opmode |= MODE_STA_IBSS;
+ local->config.rmode &= 0xfe00;
+ local->config.scanMode = SCANMODE_ACTIVE;
+ clear_bit (FLAG_802_11, &local->flags);
+ break;
+ case IW_MODE_INFRA:
+ local->config.opmode &= 0xFF00;
+ local->config.opmode |= MODE_STA_ESS;
+ local->config.rmode &= 0xfe00;
+ local->config.scanMode = SCANMODE_ACTIVE;
+ clear_bit (FLAG_802_11, &local->flags);
+ break;
+ case IW_MODE_MASTER:
+ local->config.opmode &= 0xFF00;
+ local->config.opmode |= MODE_AP;
+ local->config.rmode &= 0xfe00;
+ local->config.scanMode = SCANMODE_ACTIVE;
+ clear_bit (FLAG_802_11, &local->flags);
+ break;
+ case IW_MODE_REPEAT:
+ local->config.opmode &= 0xFF00;
+ local->config.opmode |= MODE_AP_RPTR;
+ local->config.rmode &= 0xfe00;
+ local->config.scanMode = SCANMODE_ACTIVE;
+ clear_bit (FLAG_802_11, &local->flags);
+ break;
+ case IW_MODE_MONITOR:
+ local->config.opmode &= 0xFF00;
+ local->config.opmode |= MODE_STA_ESS;
+ local->config.rmode &= 0xfe00;
+ local->config.rmode |= RXMODE_RFMON | RXMODE_DISABLE_802_3_HEADER;
+ local->config.scanMode = SCANMODE_PASSIVE;
+ set_bit (FLAG_802_11, &local->flags);
+ break;
+ default:
+ return -EINVAL;
+ }
+ if (reset)
+ set_bit (FLAG_RESET, &local->flags);
+ set_bit (FLAG_COMMIT, &local->flags);
+
+ return -EINPROGRESS; /* Call commit handler */
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Wireless Handler : get Mode of Operation
+ */
+static int airo_get_mode(struct net_device *dev,
+ struct iw_request_info *info,
+ __u32 *uwrq,
+ char *extra)
+{
+ struct airo_info *local = dev->priv;
+
+ readConfigRid(local, 1);
+ /* If not managed, assume it's ad-hoc */
+ switch (local->config.opmode & 0xFF) {
+ case MODE_STA_ESS:
+ *uwrq = IW_MODE_INFRA;
+ break;
+ case MODE_AP:
+ *uwrq = IW_MODE_MASTER;
+ break;
+ case MODE_AP_RPTR:
+ *uwrq = IW_MODE_REPEAT;
+ break;
+ default:
+ *uwrq = IW_MODE_ADHOC;
+ }
+
+ return 0;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Wireless Handler : set Encryption Key
+ */
+static int airo_set_encode(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_point *dwrq,
+ char *extra)
+{
+ struct airo_info *local = dev->priv;
+ CapabilityRid cap_rid; /* Card capability info */
+
+ /* Is WEP supported ? */
+ readCapabilityRid(local, &cap_rid, 1);
+ /* Older firmware doesn't support this...
+ if(!(cap_rid.softCap & 2)) {
+ return -EOPNOTSUPP;
+ } */
+ readConfigRid(local, 1);
+
+ /* Basic checking: do we have a key to set ?
+ * Note : with the new API, it's impossible to get a NULL pointer.
+ * Therefore, we need to check a key size == 0 instead.
+ * New version of iwconfig properly set the IW_ENCODE_NOKEY flag
+ * when no key is present (only change flags), but older versions
+ * don't do it. - Jean II */
+ if (dwrq->length > 0) {
+ wep_key_t key;
+ int index = (dwrq->flags & IW_ENCODE_INDEX) - 1;
+ int current_index = get_wep_key(local, 0xffff);
+ /* Check the size of the key */
+ if (dwrq->length > MAX_KEY_SIZE) {
+ return -EINVAL;
+ }
+ /* Check the index (none -> use current) */
+ if ((index < 0) || (index >= ((cap_rid.softCap & 0x80) ? 4:1)))
+ index = current_index;
+ /* Set the length */
+ if (dwrq->length > MIN_KEY_SIZE)
+ key.len = MAX_KEY_SIZE;
+ else
+ if (dwrq->length > 0)
+ key.len = MIN_KEY_SIZE;
+ else
+ /* Disable the key */
+ key.len = 0;
+ /* Check if the key is not marked as invalid */
+ if(!(dwrq->flags & IW_ENCODE_NOKEY)) {
+ /* Cleanup */
+ memset(key.key, 0, MAX_KEY_SIZE);
+ /* Copy the key in the driver */
+ memcpy(key.key, extra, dwrq->length);
+ /* Send the key to the card */
+ set_wep_key(local, index, key.key, key.len, 1, 1);
+ }
+ /* WE specify that if a valid key is set, encryption
+ * should be enabled (user may turn it off later)
+ * This is also how "iwconfig ethX key on" works */
+ if((index == current_index) && (key.len > 0) &&
+ (local->config.authType == AUTH_OPEN)) {
+ local->config.authType = AUTH_ENCRYPT;
+ set_bit (FLAG_COMMIT, &local->flags);
+ }
+ } else {
+ /* Do we want to just set the transmit key index ? */
+ int index = (dwrq->flags & IW_ENCODE_INDEX) - 1;
+ if ((index >= 0) && (index < ((cap_rid.softCap & 0x80)?4:1))) {
+ set_wep_key(local, index, NULL, 0, 1, 1);
+ } else
+ /* Don't complain if only change the mode */
+ if(!dwrq->flags & IW_ENCODE_MODE) {
+ return -EINVAL;
+ }
+ }
+ /* Read the flags */
+ if(dwrq->flags & IW_ENCODE_DISABLED)
+ local->config.authType = AUTH_OPEN; // disable encryption
+ if(dwrq->flags & IW_ENCODE_RESTRICTED)
+ local->config.authType = AUTH_SHAREDKEY; // Only Both
+ if(dwrq->flags & IW_ENCODE_OPEN)
+ local->config.authType = AUTH_ENCRYPT; // Only Wep
+ /* Commit the changes to flags if needed */
+ if(dwrq->flags & IW_ENCODE_MODE)
+ set_bit (FLAG_COMMIT, &local->flags);
+ return -EINPROGRESS; /* Call commit handler */
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Wireless Handler : get Encryption Key
+ */
+static int airo_get_encode(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_point *dwrq,
+ char *extra)
+{
+ struct airo_info *local = dev->priv;
+ int index = (dwrq->flags & IW_ENCODE_INDEX) - 1;
+ CapabilityRid cap_rid; /* Card capability info */
+
+ /* Is it supported ? */
+ readCapabilityRid(local, &cap_rid, 1);
+ if(!(cap_rid.softCap & 2)) {
+ return -EOPNOTSUPP;
+ }
+ readConfigRid(local, 1);
+ /* Check encryption mode */
+ switch(local->config.authType) {
+ case AUTH_ENCRYPT:
+ dwrq->flags = IW_ENCODE_OPEN;
+ break;
+ case AUTH_SHAREDKEY:
+ dwrq->flags = IW_ENCODE_RESTRICTED;
+ break;
+ default:
+ case AUTH_OPEN:
+ dwrq->flags = IW_ENCODE_DISABLED;
+ break;
+ }
+ /* We can't return the key, so set the proper flag and return zero */
+ dwrq->flags |= IW_ENCODE_NOKEY;
+ memset(extra, 0, 16);
+
+ /* Which key do we want ? -1 -> tx index */
+ if ((index < 0) || (index >= ((cap_rid.softCap & 0x80) ? 4 : 1)))
+ index = get_wep_key(local, 0xffff);
+ dwrq->flags |= index + 1;
+ /* Copy the key to the user buffer */
+ dwrq->length = get_wep_key(local, index);
+ if (dwrq->length > 16) {
+ dwrq->length=0;
+ }
+ return 0;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Wireless Handler : set Tx-Power
+ */
+static int airo_set_txpow(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *vwrq,
+ char *extra)
+{
+ struct airo_info *local = dev->priv;
+ CapabilityRid cap_rid; /* Card capability info */
+ int i;
+ int rc = -EINVAL;
+
+ readCapabilityRid(local, &cap_rid, 1);
+
+ if (vwrq->disabled) {
+ set_bit (FLAG_RADIO_OFF, &local->flags);
+ set_bit (FLAG_COMMIT, &local->flags);
+ return -EINPROGRESS; /* Call commit handler */
+ }
+ if (vwrq->flags != IW_TXPOW_MWATT) {
+ return -EINVAL;
+ }
+ clear_bit (FLAG_RADIO_OFF, &local->flags);
+ for (i = 0; cap_rid.txPowerLevels[i] && (i < 8); i++)
+ if ((vwrq->value==cap_rid.txPowerLevels[i])) {
+ readConfigRid(local, 1);
+ local->config.txPower = vwrq->value;
+ set_bit (FLAG_COMMIT, &local->flags);
+ rc = -EINPROGRESS; /* Call commit handler */
+ break;
+ }
+ return rc;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Wireless Handler : get Tx-Power
+ */
+static int airo_get_txpow(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *vwrq,
+ char *extra)
+{
+ struct airo_info *local = dev->priv;
+
+ readConfigRid(local, 1);
+ vwrq->value = local->config.txPower;
+ vwrq->fixed = 1; /* No power control */
+ vwrq->disabled = test_bit(FLAG_RADIO_OFF, &local->flags);
+ vwrq->flags = IW_TXPOW_MWATT;
+
+ return 0;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Wireless Handler : set Retry limits
+ */
+static int airo_set_retry(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *vwrq,
+ char *extra)
+{
+ struct airo_info *local = dev->priv;
+ int rc = -EINVAL;
+
+ if(vwrq->disabled) {
+ return -EINVAL;
+ }
+ readConfigRid(local, 1);
+ if(vwrq->flags & IW_RETRY_LIMIT) {
+ if(vwrq->flags & IW_RETRY_MAX)
+ local->config.longRetryLimit = vwrq->value;
+ else if (vwrq->flags & IW_RETRY_MIN)
+ local->config.shortRetryLimit = vwrq->value;
+ else {
+ /* No modifier : set both */
+ local->config.longRetryLimit = vwrq->value;
+ local->config.shortRetryLimit = vwrq->value;
+ }
+ set_bit (FLAG_COMMIT, &local->flags);
+ rc = -EINPROGRESS; /* Call commit handler */
+ }
+ if(vwrq->flags & IW_RETRY_LIFETIME) {
+ local->config.txLifetime = vwrq->value / 1024;
+ set_bit (FLAG_COMMIT, &local->flags);
+ rc = -EINPROGRESS; /* Call commit handler */
+ }
+ return rc;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Wireless Handler : get Retry limits
+ */
+static int airo_get_retry(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *vwrq,
+ char *extra)
+{
+ struct airo_info *local = dev->priv;
+
+ vwrq->disabled = 0; /* Can't be disabled */
+
+ readConfigRid(local, 1);
+ /* Note : by default, display the min retry number */
+ if((vwrq->flags & IW_RETRY_TYPE) == IW_RETRY_LIFETIME) {
+ vwrq->flags = IW_RETRY_LIFETIME;
+ vwrq->value = (int)local->config.txLifetime * 1024;
+ } else if((vwrq->flags & IW_RETRY_MAX)) {
+ vwrq->flags = IW_RETRY_LIMIT | IW_RETRY_MAX;
+ vwrq->value = (int)local->config.longRetryLimit;
+ } else {
+ vwrq->flags = IW_RETRY_LIMIT;
+ vwrq->value = (int)local->config.shortRetryLimit;
+ if((int)local->config.shortRetryLimit != (int)local->config.longRetryLimit)
+ vwrq->flags |= IW_RETRY_MIN;
+ }
+
+ return 0;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Wireless Handler : get range info
+ */
+static int airo_get_range(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_point *dwrq,
+ char *extra)
+{
+ struct airo_info *local = dev->priv;
+ struct iw_range *range = (struct iw_range *) extra;
+ CapabilityRid cap_rid; /* Card capability info */
+ int i;
+ int k;
+
+ readCapabilityRid(local, &cap_rid, 1);
+
+ dwrq->length = sizeof(struct iw_range);
+ memset(range, 0, sizeof(*range));
+ range->min_nwid = 0x0000;
+ range->max_nwid = 0x0000;
+ range->num_channels = 14;
+ /* Should be based on cap_rid.country to give only
+ * what the current card support */
+ k = 0;
+ for(i = 0; i < 14; i++) {
+ range->freq[k].i = i + 1; /* List index */
+ range->freq[k].m = frequency_list[i] * 100000;
+ range->freq[k++].e = 1; /* Values in table in MHz -> * 10^5 * 10 */
+ }
+ range->num_frequency = k;
+
+ /* Hum... Should put the right values there */
+ range->max_qual.qual = airo_get_max_quality(&cap_rid);
+ range->max_qual.level = 0x100 - 120; /* -120 dBm */
+ range->max_qual.noise = 0;
+ range->sensitivity = 65535;
+
+ for(i = 0 ; i < 8 ; i++) {
+ range->bitrate[i] = cap_rid.supportedRates[i] * 500000;
+ if(range->bitrate[i] == 0)
+ break;
+ }
+ range->num_bitrates = i;
+
+ /* Set an indication of the max TCP throughput
+ * in bit/s that we can expect using this interface.
+ * May be use for QoS stuff... Jean II */
+ if(i > 2)
+ range->throughput = 5000 * 1000;
+ else
+ range->throughput = 1500 * 1000;
+
+ range->min_rts = 0;
+ range->max_rts = 2312;
+ range->min_frag = 256;
+ range->max_frag = 2312;
+
+ if(cap_rid.softCap & 2) {
+ // WEP: RC4 40 bits
+ range->encoding_size[0] = 5;
+ // RC4 ~128 bits
+ if (cap_rid.softCap & 0x100) {
+ range->encoding_size[1] = 13;
+ range->num_encoding_sizes = 2;
+ } else
+ range->num_encoding_sizes = 1;
+ range->max_encoding_tokens = (cap_rid.softCap & 0x80) ? 4 : 1;
+ } else {
+ range->num_encoding_sizes = 0;
+ range->max_encoding_tokens = 0;
+ }
+ range->min_pmp = 0;
+ range->max_pmp = 5000000; /* 5 secs */
+ range->min_pmt = 0;
+ range->max_pmt = 65535 * 1024; /* ??? */
+ range->pmp_flags = IW_POWER_PERIOD;
+ range->pmt_flags = IW_POWER_TIMEOUT;
+ range->pm_capa = IW_POWER_PERIOD | IW_POWER_TIMEOUT | IW_POWER_ALL_R;
+
+ /* Transmit Power - values are in mW */
+ for(i = 0 ; i < 8 ; i++) {
+ range->txpower[i] = cap_rid.txPowerLevels[i];
+ if(range->txpower[i] == 0)
+ break;
+ }
+ range->num_txpower = i;
+ range->txpower_capa = IW_TXPOW_MWATT;
+ range->we_version_source = 12;
+ range->we_version_compiled = WIRELESS_EXT;
+ range->retry_capa = IW_RETRY_LIMIT | IW_RETRY_LIFETIME;
+ range->retry_flags = IW_RETRY_LIMIT;
+ range->r_time_flags = IW_RETRY_LIFETIME;
+ range->min_retry = 1;
+ range->max_retry = 65535;
+ range->min_r_time = 1024;
+ range->max_r_time = 65535 * 1024;
+ /* Experimental measurements - boundary 11/5.5 Mb/s */
+ /* Note : with or without the (local->rssi), results
+ * are somewhat different. - Jean II */
+ range->avg_qual.qual = airo_get_avg_quality(&cap_rid);
+ if (local->rssi)
+ range->avg_qual.level = 186; /* -70 dBm */
+ else
+ range->avg_qual.level = 176; /* -80 dBm */
+ range->avg_qual.noise = 0;
+
+ /* Event capability (kernel + driver) */
+ range->event_capa[0] = (IW_EVENT_CAPA_K_0 |
+ IW_EVENT_CAPA_MASK(SIOCGIWTHRSPY) |
+ IW_EVENT_CAPA_MASK(SIOCGIWAP) |
+ IW_EVENT_CAPA_MASK(SIOCGIWSCAN));
+ range->event_capa[1] = IW_EVENT_CAPA_K_1;
+ range->event_capa[4] = IW_EVENT_CAPA_MASK(IWEVTXDROP);
+ return 0;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Wireless Handler : set Power Management
+ */
+static int airo_set_power(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *vwrq,
+ char *extra)
+{
+ struct airo_info *local = dev->priv;
+
+ readConfigRid(local, 1);
+ if (vwrq->disabled) {
+ if ((local->config.rmode & 0xFF) >= RXMODE_RFMON) {
+ return -EINVAL;
+ }
+ local->config.powerSaveMode = POWERSAVE_CAM;
+ local->config.rmode &= 0xFF00;
+ local->config.rmode |= RXMODE_BC_MC_ADDR;
+ set_bit (FLAG_COMMIT, &local->flags);
+ return -EINPROGRESS; /* Call commit handler */
+ }
+ if ((vwrq->flags & IW_POWER_TYPE) == IW_POWER_TIMEOUT) {
+ local->config.fastListenDelay = (vwrq->value + 500) / 1024;
+ local->config.powerSaveMode = POWERSAVE_PSPCAM;
+ set_bit (FLAG_COMMIT, &local->flags);
+ } else if ((vwrq->flags & IW_POWER_TYPE) == IW_POWER_PERIOD) {
+ local->config.fastListenInterval = local->config.listenInterval = (vwrq->value + 500) / 1024;
+ local->config.powerSaveMode = POWERSAVE_PSPCAM;
+ set_bit (FLAG_COMMIT, &local->flags);
+ }
+ switch (vwrq->flags & IW_POWER_MODE) {
+ case IW_POWER_UNICAST_R:
+ if ((local->config.rmode & 0xFF) >= RXMODE_RFMON) {
+ return -EINVAL;
+ }
+ local->config.rmode &= 0xFF00;
+ local->config.rmode |= RXMODE_ADDR;
+ set_bit (FLAG_COMMIT, &local->flags);
+ break;
+ case IW_POWER_ALL_R:
+ if ((local->config.rmode & 0xFF) >= RXMODE_RFMON) {
+ return -EINVAL;
+ }
+ local->config.rmode &= 0xFF00;
+ local->config.rmode |= RXMODE_BC_MC_ADDR;
+ set_bit (FLAG_COMMIT, &local->flags);
+ case IW_POWER_ON:
+ break;
+ default:
+ return -EINVAL;
+ }
+ // Note : we may want to factor local->need_commit here
+ // Note2 : may also want to factor RXMODE_RFMON test
+ return -EINPROGRESS; /* Call commit handler */
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Wireless Handler : get Power Management
+ */
+static int airo_get_power(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *vwrq,
+ char *extra)
+{
+ struct airo_info *local = dev->priv;
+ int mode;
+
+ readConfigRid(local, 1);
+ mode = local->config.powerSaveMode;
+ if ((vwrq->disabled = (mode == POWERSAVE_CAM)))
+ return 0;
+ if ((vwrq->flags & IW_POWER_TYPE) == IW_POWER_TIMEOUT) {
+ vwrq->value = (int)local->config.fastListenDelay * 1024;
+ vwrq->flags = IW_POWER_TIMEOUT;
+ } else {
+ vwrq->value = (int)local->config.fastListenInterval * 1024;
+ vwrq->flags = IW_POWER_PERIOD;
+ }
+ if ((local->config.rmode & 0xFF) == RXMODE_ADDR)
+ vwrq->flags |= IW_POWER_UNICAST_R;
+ else
+ vwrq->flags |= IW_POWER_ALL_R;
+
+ return 0;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Wireless Handler : set Sensitivity
+ */
+static int airo_set_sens(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *vwrq,
+ char *extra)
+{
+ struct airo_info *local = dev->priv;
+
+ readConfigRid(local, 1);
+ local->config.rssiThreshold = vwrq->disabled ? RSSI_DEFAULT : vwrq->value;
+ set_bit (FLAG_COMMIT, &local->flags);
+
+ return -EINPROGRESS; /* Call commit handler */
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Wireless Handler : get Sensitivity
+ */
+static int airo_get_sens(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *vwrq,
+ char *extra)
+{
+ struct airo_info *local = dev->priv;
+
+ readConfigRid(local, 1);
+ vwrq->value = local->config.rssiThreshold;
+ vwrq->disabled = (vwrq->value == 0);
+ vwrq->fixed = 1;
+
+ return 0;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Wireless Handler : get AP List
+ * Note : this is deprecated in favor of IWSCAN
+ */
+static int airo_get_aplist(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_point *dwrq,
+ char *extra)
+{
+ struct airo_info *local = dev->priv;
+ struct sockaddr *address = (struct sockaddr *) extra;
+ struct iw_quality qual[IW_MAX_AP];
+ BSSListRid BSSList;
+ int i;
+ int loseSync = capable(CAP_NET_ADMIN) ? 1: -1;
+
+ for (i = 0; i < IW_MAX_AP; i++) {
+ if (readBSSListRid(local, loseSync, &BSSList))
+ break;
+ loseSync = 0;
+ memcpy(address[i].sa_data, BSSList.bssid, ETH_ALEN);
+ address[i].sa_family = ARPHRD_ETHER;
+ if (local->rssi)
+ qual[i].level = 0x100 - local->rssi[BSSList.rssi].rssidBm;
+ else
+ qual[i].level = (BSSList.rssi + 321) / 2;
+ qual[i].qual = qual[i].noise = 0;
+ qual[i].updated = 2;
+ if (BSSList.index == 0xffff)
+ break;
+ }
+ if (!i) {
+ StatusRid status_rid; /* Card status info */
+ readStatusRid(local, &status_rid, 1);
+ for (i = 0;
+ i < min(IW_MAX_AP, 4) &&
+ (status_rid.bssid[i][0]
+ & status_rid.bssid[i][1]
+ & status_rid.bssid[i][2]
+ & status_rid.bssid[i][3]
+ & status_rid.bssid[i][4]
+ & status_rid.bssid[i][5])!=0xff &&
+ (status_rid.bssid[i][0]
+ | status_rid.bssid[i][1]
+ | status_rid.bssid[i][2]
+ | status_rid.bssid[i][3]
+ | status_rid.bssid[i][4]
+ | status_rid.bssid[i][5]);
+ i++) {
+ memcpy(address[i].sa_data,
+ status_rid.bssid[i], ETH_ALEN);
+ address[i].sa_family = ARPHRD_ETHER;
+ }
+ } else {
+ dwrq->flags = 1; /* Should be define'd */
+ memcpy(extra + sizeof(struct sockaddr)*i,
+ &qual, sizeof(struct iw_quality)*i);
+ }
+ dwrq->length = i;
+
+ return 0;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Wireless Handler : Initiate Scan
+ */
+static int airo_set_scan(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *vwrq,
+ char *extra)
+{
+ struct airo_info *ai = dev->priv;
+ Cmd cmd;
+ Resp rsp;
+
+ /* Note : you may have realised that, as this is a SET operation,
+ * this is privileged and therefore a normal user can't
+ * perform scanning.
+ * This is not an error, while the device perform scanning,
+ * traffic doesn't flow, so it's a perfect DoS...
+ * Jean II */
+ if (ai->flags & FLAG_RADIO_MASK) return -ENETDOWN;
+
+ /* Initiate a scan command */
+ memset(&cmd, 0, sizeof(cmd));
+ cmd.cmd=CMD_LISTBSS;
+ if (down_interruptible(&ai->sem))
+ return -ERESTARTSYS;
+ issuecommand(ai, &cmd, &rsp);
+ ai->scan_timestamp = jiffies;
+ up(&ai->sem);
+
+ /* At this point, just return to the user. */
+
+ return 0;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Translate scan data returned from the card to a card independent
+ * format that the Wireless Tools will understand - Jean II
+ */
+static inline char *airo_translate_scan(struct net_device *dev,
+ char *current_ev,
+ char *end_buf,
+ BSSListRid *list)
+{
+ struct airo_info *ai = dev->priv;
+ struct iw_event iwe; /* Temporary buffer */
+ u16 capabilities;
+ char * current_val; /* For rates */
+ int i;
+
+ /* First entry *MUST* be the AP MAC address */
+ iwe.cmd = SIOCGIWAP;
+ iwe.u.ap_addr.sa_family = ARPHRD_ETHER;
+ memcpy(iwe.u.ap_addr.sa_data, list->bssid, ETH_ALEN);
+ current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, IW_EV_ADDR_LEN);
+
+ /* Other entries will be displayed in the order we give them */
+
+ /* Add the ESSID */
+ iwe.u.data.length = list->ssidLen;
+ if(iwe.u.data.length > 32)
+ iwe.u.data.length = 32;
+ iwe.cmd = SIOCGIWESSID;
+ iwe.u.data.flags = 1;
+ current_ev = iwe_stream_add_point(current_ev, end_buf, &iwe, list->ssid);
+
+ /* Add mode */
+ iwe.cmd = SIOCGIWMODE;
+ capabilities = le16_to_cpu(list->cap);
+ if(capabilities & (CAP_ESS | CAP_IBSS)) {
+ if(capabilities & CAP_ESS)
+ iwe.u.mode = IW_MODE_MASTER;
+ else
+ iwe.u.mode = IW_MODE_ADHOC;
+ current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, IW_EV_UINT_LEN);
+ }
+
+ /* Add frequency */
+ iwe.cmd = SIOCGIWFREQ;
+ iwe.u.freq.m = le16_to_cpu(list->dsChannel);
+ iwe.u.freq.m = frequency_list[iwe.u.freq.m] * 100000;
+ iwe.u.freq.e = 1;
+ current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, IW_EV_FREQ_LEN);
+
+ /* Add quality statistics */
+ iwe.cmd = IWEVQUAL;
+ if (ai->rssi)
+ iwe.u.qual.level = 0x100 - ai->rssi[list->rssi].rssidBm;
+ else
+ iwe.u.qual.level = (list->rssi + 321) / 2;
+ iwe.u.qual.noise = 0;
+ iwe.u.qual.qual = 0;
+ current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, IW_EV_QUAL_LEN);
+
+ /* Add encryption capability */
+ iwe.cmd = SIOCGIWENCODE;
+ if(capabilities & CAP_PRIVACY)
+ iwe.u.data.flags = IW_ENCODE_ENABLED | IW_ENCODE_NOKEY;
+ else
+ iwe.u.data.flags = IW_ENCODE_DISABLED;
+ iwe.u.data.length = 0;
+ current_ev = iwe_stream_add_point(current_ev, end_buf, &iwe, list->ssid);
+
+ /* Rate : stuffing multiple values in a single event require a bit
+ * more of magic - Jean II */
+ current_val = current_ev + IW_EV_LCP_LEN;
+
+ iwe.cmd = SIOCGIWRATE;
+ /* Those two flags are ignored... */
+ iwe.u.bitrate.fixed = iwe.u.bitrate.disabled = 0;
+ /* Max 8 values */
+ for(i = 0 ; i < 8 ; i++) {
+ /* NULL terminated */
+ if(list->rates[i] == 0)
+ break;
+ /* Bit rate given in 500 kb/s units (+ 0x80) */
+ iwe.u.bitrate.value = ((list->rates[i] & 0x7f) * 500000);
+ /* Add new value to event */
+ current_val = iwe_stream_add_value(current_ev, current_val, end_buf, &iwe, IW_EV_PARAM_LEN);
+ }
+ /* Check if we added any event */
+ if((current_val - current_ev) > IW_EV_LCP_LEN)
+ current_ev = current_val;
+
+ /* The other data in the scan result are not really
+ * interesting, so for now drop it - Jean II */
+ return current_ev;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Wireless Handler : Read Scan Results
+ */
+static int airo_get_scan(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_point *dwrq,
+ char *extra)
+{
+ struct airo_info *ai = dev->priv;
+ BSSListRid BSSList;
+ int rc;
+ char *current_ev = extra;
+
+ /* When we are associated again, the scan has surely finished.
+ * Just in case, let's make sure enough time has elapsed since
+ * we started the scan. - Javier */
+ if(ai->scan_timestamp && time_before(jiffies,ai->scan_timestamp+3*HZ)) {
+ /* Important note : we don't want to block the caller
+ * until results are ready for various reasons.
+ * First, managing wait queues is complex and racy
+ * (there may be multiple simultaneous callers).
+ * Second, we grab some rtnetlink lock before comming
+ * here (in dev_ioctl()).
+ * Third, the caller can wait on the Wireless Event
+ * - Jean II */
+ return -EAGAIN;
+ }
+ ai->scan_timestamp = 0;
+
+ /* There's only a race with proc_BSSList_open(), but its
+ * consequences are begnign. So I don't bother fixing it - Javier */
+
+ /* Try to read the first entry of the scan result */
+ rc = PC4500_readrid(ai, RID_BSSLISTFIRST, &BSSList, sizeof(BSSList), 1);
+ if((rc) || (BSSList.index == 0xffff)) {
+ /* Client error, no scan results...
+ * The caller need to restart the scan. */
+ return -ENODATA;
+ }
+
+ /* Read and parse all entries */
+ while((!rc) && (BSSList.index != 0xffff)) {
+ /* Translate to WE format this entry */
+ current_ev = airo_translate_scan(dev, current_ev,
+ extra + dwrq->length,
+ &BSSList);
+
+ /* Check if there is space for one more entry */
+ if((extra + dwrq->length - current_ev) <= IW_EV_ADDR_LEN) {
+ /* Ask user space to try again with a bigger buffer */
+ return -E2BIG;
+ }
+
+ /* Read next entry */
+ rc = PC4500_readrid(ai, RID_BSSLISTNEXT,
+ &BSSList, sizeof(BSSList), 1);
+ }
+ /* Length of data */
+ dwrq->length = (current_ev - extra);
+ dwrq->flags = 0; /* todo */
+
+ return 0;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Commit handler : called after a bunch of SET operations
+ */
+static int airo_config_commit(struct net_device *dev,
+ struct iw_request_info *info, /* NULL */
+ void *zwrq, /* NULL */
+ char *extra) /* NULL */
+{
+ struct airo_info *local = dev->priv;
+ Resp rsp;
+
+ if (!test_bit (FLAG_COMMIT, &local->flags))
+ return 0;
+
+ /* Some of the "SET" function may have modified some of the
+ * parameters. It's now time to commit them in the card */
+ disable_MAC(local, 1);
+ if (test_bit (FLAG_RESET, &local->flags)) {
+ APListRid APList_rid;
+ SsidRid SSID_rid;
+
+ readAPListRid(local, &APList_rid);
+ readSsidRid(local, &SSID_rid);
+ if (test_bit(FLAG_MPI,&local->flags))
+ setup_card(local, dev->dev_addr, 1 );
+ else
+ reset_airo_card(dev);
+ disable_MAC(local, 1);
+ writeSsidRid(local, &SSID_rid, 1);
+ writeAPListRid(local, &APList_rid, 1);
+ }
+ if (down_interruptible(&local->sem))
+ return -ERESTARTSYS;
+ writeConfigRid(local, 0);
+ enable_MAC(local, &rsp, 0);
+ if (test_bit (FLAG_RESET, &local->flags))
+ airo_set_promisc(local);
+ else
+ up(&local->sem);
+
+ return 0;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Structures to export the Wireless Handlers
+ */
+
+static const struct iw_priv_args airo_private_args[] = {
+/*{ cmd, set_args, get_args, name } */
+ { AIROIOCTL, IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | sizeof (aironet_ioctl),
+ IW_PRIV_TYPE_BYTE | 2047, "airoioctl" },
+ { AIROIDIFC, IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | sizeof (aironet_ioctl),
+ IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "airoidifc" },
+};
+
+static const iw_handler airo_handler[] =
+{
+ (iw_handler) airo_config_commit, /* SIOCSIWCOMMIT */
+ (iw_handler) airo_get_name, /* SIOCGIWNAME */
+ (iw_handler) NULL, /* SIOCSIWNWID */
+ (iw_handler) NULL, /* SIOCGIWNWID */
+ (iw_handler) airo_set_freq, /* SIOCSIWFREQ */
+ (iw_handler) airo_get_freq, /* SIOCGIWFREQ */
+ (iw_handler) airo_set_mode, /* SIOCSIWMODE */
+ (iw_handler) airo_get_mode, /* SIOCGIWMODE */
+ (iw_handler) airo_set_sens, /* SIOCSIWSENS */
+ (iw_handler) airo_get_sens, /* SIOCGIWSENS */
+ (iw_handler) NULL, /* SIOCSIWRANGE */
+ (iw_handler) airo_get_range, /* SIOCGIWRANGE */
+ (iw_handler) NULL, /* SIOCSIWPRIV */
+ (iw_handler) NULL, /* SIOCGIWPRIV */
+ (iw_handler) NULL, /* SIOCSIWSTATS */
+ (iw_handler) NULL, /* SIOCGIWSTATS */
+ iw_handler_set_spy, /* SIOCSIWSPY */
+ iw_handler_get_spy, /* SIOCGIWSPY */
+ iw_handler_set_thrspy, /* SIOCSIWTHRSPY */
+ iw_handler_get_thrspy, /* SIOCGIWTHRSPY */
+ (iw_handler) airo_set_wap, /* SIOCSIWAP */
+ (iw_handler) airo_get_wap, /* SIOCGIWAP */
+ (iw_handler) NULL, /* -- hole -- */
+ (iw_handler) airo_get_aplist, /* SIOCGIWAPLIST */
+ (iw_handler) airo_set_scan, /* SIOCSIWSCAN */
+ (iw_handler) airo_get_scan, /* SIOCGIWSCAN */
+ (iw_handler) airo_set_essid, /* SIOCSIWESSID */
+ (iw_handler) airo_get_essid, /* SIOCGIWESSID */
+ (iw_handler) airo_set_nick, /* SIOCSIWNICKN */
+ (iw_handler) airo_get_nick, /* SIOCGIWNICKN */
+ (iw_handler) NULL, /* -- hole -- */
+ (iw_handler) NULL, /* -- hole -- */
+ (iw_handler) airo_set_rate, /* SIOCSIWRATE */
+ (iw_handler) airo_get_rate, /* SIOCGIWRATE */
+ (iw_handler) airo_set_rts, /* SIOCSIWRTS */
+ (iw_handler) airo_get_rts, /* SIOCGIWRTS */
+ (iw_handler) airo_set_frag, /* SIOCSIWFRAG */
+ (iw_handler) airo_get_frag, /* SIOCGIWFRAG */
+ (iw_handler) airo_set_txpow, /* SIOCSIWTXPOW */
+ (iw_handler) airo_get_txpow, /* SIOCGIWTXPOW */
+ (iw_handler) airo_set_retry, /* SIOCSIWRETRY */
+ (iw_handler) airo_get_retry, /* SIOCGIWRETRY */
+ (iw_handler) airo_set_encode, /* SIOCSIWENCODE */
+ (iw_handler) airo_get_encode, /* SIOCGIWENCODE */
+ (iw_handler) airo_set_power, /* SIOCSIWPOWER */
+ (iw_handler) airo_get_power, /* SIOCGIWPOWER */
+};
+
+/* Note : don't describe AIROIDIFC and AIROOLDIDIFC in here.
+ * We want to force the use of the ioctl code, because those can't be
+ * won't work the iw_handler code (because they simultaneously read
+ * and write data and iw_handler can't do that).
+ * Note that it's perfectly legal to read/write on a single ioctl command,
+ * you just can't use iwpriv and need to force it via the ioctl handler.
+ * Jean II */
+static const iw_handler airo_private_handler[] =
+{
+ NULL, /* SIOCIWFIRSTPRIV */
+};
+
+static const struct iw_handler_def airo_handler_def =
+{
+ .num_standard = sizeof(airo_handler)/sizeof(iw_handler),
+ .num_private = sizeof(airo_private_handler)/sizeof(iw_handler),
+ .num_private_args = sizeof(airo_private_args)/sizeof(struct iw_priv_args),
+ .standard = airo_handler,
+ .private = airo_private_handler,
+ .private_args = airo_private_args,
+ .get_wireless_stats = airo_get_wireless_stats,
+};
+
+#endif /* WIRELESS_EXT */
+
+/*
+ * This defines the configuration part of the Wireless Extensions
+ * Note : irq and spinlock protection will occur in the subroutines
+ *
+ * TODO :
+ * o Check input value more carefully and fill correct values in range
+ * o Test and shakeout the bugs (if any)
+ *
+ * Jean II
+ *
+ * Javier Achirica did a great job of merging code from the unnamed CISCO
+ * developer that added support for flashing the card.
+ */
+static int airo_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+{
+ int rc = 0;
+ struct airo_info *ai = (struct airo_info *)dev->priv;
+
+ if (ai->power)
+ return 0;
+
+ switch (cmd) {
+#ifdef CISCO_EXT
+ case AIROIDIFC:
+#ifdef AIROOLDIDIFC
+ case AIROOLDIDIFC:
+#endif
+ {
+ int val = AIROMAGIC;
+ aironet_ioctl com;
+ if (copy_from_user(&com,rq->ifr_data,sizeof(com)))
+ rc = -EFAULT;
+ else if (copy_to_user(com.data,(char *)&val,sizeof(val)))
+ rc = -EFAULT;
+ }
+ break;
+
+ case AIROIOCTL:
+#ifdef AIROOLDIOCTL
+ case AIROOLDIOCTL:
+#endif
+ /* Get the command struct and hand it off for evaluation by
+ * the proper subfunction
+ */
+ {
+ aironet_ioctl com;
+ if (copy_from_user(&com,rq->ifr_data,sizeof(com))) {
+ rc = -EFAULT;
+ break;
+ }
+
+ /* Separate R/W functions bracket legality here
+ */
+ if ( com.command == AIRORSWVERSION ) {
+ if (copy_to_user(com.data, swversion, sizeof(swversion)))
+ rc = -EFAULT;
+ else
+ rc = 0;
+ }
+ else if ( com.command <= AIRORRID)
+ rc = readrids(dev,&com);
+ else if ( com.command >= AIROPCAP && com.command <= (AIROPLEAPUSR+2) )
+ rc = writerids(dev,&com);
+ else if ( com.command >= AIROFLSHRST && com.command <= AIRORESTART )
+ rc = flashcard(dev,&com);
+ else
+ rc = -EINVAL; /* Bad command in ioctl */
+ }
+ break;
+#endif /* CISCO_EXT */
+
+ // All other calls are currently unsupported
+ default:
+ rc = -EOPNOTSUPP;
+ }
+ return rc;
+}
+
+#ifdef WIRELESS_EXT
+/*
+ * Get the Wireless stats out of the driver
+ * Note : irq and spinlock protection will occur in the subroutines
+ *
+ * TODO :
+ * o Check if work in Ad-Hoc mode (otherwise, use SPY, as in wvlan_cs)
+ *
+ * Jean
+ */
+static void airo_read_wireless_stats(struct airo_info *local)
+{
+ StatusRid status_rid;
+ StatsRid stats_rid;
+ CapabilityRid cap_rid;
+ u32 *vals = stats_rid.vals;
+
+ /* Get stats out of the card */
+ clear_bit(JOB_WSTATS, &local->flags);
+ if (local->power) {
+ up(&local->sem);
+ return;
+ }
+ readCapabilityRid(local, &cap_rid, 0);
+ readStatusRid(local, &status_rid, 0);
+ readStatsRid(local, &stats_rid, RID_STATS, 0);
+ up(&local->sem);
+
+ /* The status */
+ local->wstats.status = status_rid.mode;
+
+ /* Signal quality and co. But where is the noise level ??? */
+ local->wstats.qual.qual = airo_get_quality(&status_rid, &cap_rid);
+ if (local->rssi)
+ local->wstats.qual.level = 0x100 - local->rssi[status_rid.sigQuality].rssidBm;
+ else
+ local->wstats.qual.level = (status_rid.normalizedSignalStrength + 321) / 2;
+ if (status_rid.len >= 124) {
+ local->wstats.qual.noise = 256 - status_rid.noisedBm;
+ local->wstats.qual.updated = 7;
+ } else {
+ local->wstats.qual.noise = 0;
+ local->wstats.qual.updated = 3;
+ }
+
+ /* Packets discarded in the wireless adapter due to wireless
+ * specific problems */
+ local->wstats.discard.nwid = vals[56] + vals[57] + vals[58];/* SSID Mismatch */
+ local->wstats.discard.code = vals[6];/* RxWepErr */
+ local->wstats.discard.fragment = vals[30];
+ local->wstats.discard.retries = vals[10];
+ local->wstats.discard.misc = vals[1] + vals[32];
+ local->wstats.miss.beacon = vals[34];
+}
+
+struct iw_statistics *airo_get_wireless_stats(struct net_device *dev)
+{
+ struct airo_info *local = dev->priv;
+
+ if (!test_bit(JOB_WSTATS, &local->flags)) {
+ /* Get stats out of the card if available */
+ if (down_trylock(&local->sem) != 0) {
+ set_bit(JOB_WSTATS, &local->flags);
+ wake_up_interruptible(&local->thr_wait);
+ } else
+ airo_read_wireless_stats(local);
+ }
+
+ return &local->wstats;
+}
+#endif /* WIRELESS_EXT */
+
+#ifdef CISCO_EXT
+/*
+ * This just translates from driver IOCTL codes to the command codes to
+ * feed to the radio's host interface. Things can be added/deleted
+ * as needed. This represents the READ side of control I/O to
+ * the card
+ */
+static int readrids(struct net_device *dev, aironet_ioctl *comp) {
+ unsigned short ridcode;
+ unsigned char *iobuf;
+ int len;
+ struct airo_info *ai = dev->priv;
+ Resp rsp;
+
+ if (test_bit(FLAG_FLASHING, &ai->flags))
+ return -EIO;
+
+ switch(comp->command)
+ {
+ case AIROGCAP: ridcode = RID_CAPABILITIES; break;
+ case AIROGCFG: ridcode = RID_CONFIG;
+ if (test_bit(FLAG_COMMIT, &ai->flags)) {
+ disable_MAC (ai, 1);
+ writeConfigRid (ai, 1);
+ enable_MAC (ai, &rsp, 1);
+ }
+ break;
+ case AIROGSLIST: ridcode = RID_SSID; break;
+ case AIROGVLIST: ridcode = RID_APLIST; break;
+ case AIROGDRVNAM: ridcode = RID_DRVNAME; break;
+ case AIROGEHTENC: ridcode = RID_ETHERENCAP; break;
+ case AIROGWEPKTMP: ridcode = RID_WEP_TEMP;
+ /* Only super-user can read WEP keys */
+ if (!capable(CAP_NET_ADMIN))
+ return -EPERM;
+ break;
+ case AIROGWEPKNV: ridcode = RID_WEP_PERM;
+ /* Only super-user can read WEP keys */
+ if (!capable(CAP_NET_ADMIN))
+ return -EPERM;
+ break;
+ case AIROGSTAT: ridcode = RID_STATUS; break;
+ case AIROGSTATSD32: ridcode = RID_STATSDELTA; break;
+ case AIROGSTATSC32: ridcode = RID_STATS; break;
+#ifdef MICSUPPORT
+ case AIROGMICSTATS:
+ if (copy_to_user(comp->data, &ai->micstats,
+ min((int)comp->len,(int)sizeof(ai->micstats))))
+ return -EFAULT;
+ return 0;
+#endif
+ case AIRORRID: ridcode = comp->ridnum; break;
+ default:
+ return -EINVAL;
+ break;
+ }
+
+ if ((iobuf = kmalloc(RIDSIZE, GFP_KERNEL)) == NULL)
+ return -ENOMEM;
+
+ PC4500_readrid(ai,ridcode,iobuf,RIDSIZE, 1);
+ /* get the count of bytes in the rid docs say 1st 2 bytes is it.
+ * then return it to the user
+ * 9/22/2000 Honor user given length
+ */
+ len = comp->len;
+
+ if (copy_to_user(comp->data, iobuf, min(len, (int)RIDSIZE))) {
+ kfree (iobuf);
+ return -EFAULT;
+ }
+ kfree (iobuf);
+ return 0;
+}
+
+/*
+ * Danger Will Robinson write the rids here
+ */
+
+static int writerids(struct net_device *dev, aironet_ioctl *comp) {
+ struct airo_info *ai = dev->priv;
+ int ridcode;
+#ifdef MICSUPPORT
+ int enabled;
+#endif
+ Resp rsp;
+ static int (* writer)(struct airo_info *, u16 rid, const void *, int, int);
+ unsigned char *iobuf;
+
+ /* Only super-user can write RIDs */
+ if (!capable(CAP_NET_ADMIN))
+ return -EPERM;
+
+ if (test_bit(FLAG_FLASHING, &ai->flags))
+ return -EIO;
+
+ ridcode = 0;
+ writer = do_writerid;
+
+ switch(comp->command)
+ {
+ case AIROPSIDS: ridcode = RID_SSID; break;
+ case AIROPCAP: ridcode = RID_CAPABILITIES; break;
+ case AIROPAPLIST: ridcode = RID_APLIST; break;
+ case AIROPCFG: ai->config.len = 0;
+ clear_bit(FLAG_COMMIT, &ai->flags);
+ ridcode = RID_CONFIG; break;
+ case AIROPWEPKEYNV: ridcode = RID_WEP_PERM; break;
+ case AIROPLEAPUSR: ridcode = RID_LEAPUSERNAME; break;
+ case AIROPLEAPPWD: ridcode = RID_LEAPPASSWORD; break;
+ case AIROPWEPKEY: ridcode = RID_WEP_TEMP; writer = PC4500_writerid;
+ break;
+ case AIROPLEAPUSR+1: ridcode = 0xFF2A; break;
+ case AIROPLEAPUSR+2: ridcode = 0xFF2B; break;
+
+ /* this is not really a rid but a command given to the card
+ * same with MAC off
+ */
+ case AIROPMACON:
+ if (enable_MAC(ai, &rsp, 1) != 0)
+ return -EIO;
+ return 0;
+
+ /*
+ * Evidently this code in the airo driver does not get a symbol
+ * as disable_MAC. it's probably so short the compiler does not gen one.
+ */
+ case AIROPMACOFF:
+ disable_MAC(ai, 1);
+ return 0;
+
+ /* This command merely clears the counts does not actually store any data
+ * only reads rid. But as it changes the cards state, I put it in the
+ * writerid routines.
+ */
+ case AIROPSTCLR:
+ if ((iobuf = kmalloc(RIDSIZE, GFP_KERNEL)) == NULL)
+ return -ENOMEM;
+
+ PC4500_readrid(ai,RID_STATSDELTACLEAR,iobuf,RIDSIZE, 1);
+
+#ifdef MICSUPPORT
+ enabled = ai->micstats.enabled;
+ memset(&ai->micstats,0,sizeof(ai->micstats));
+ ai->micstats.enabled = enabled;
+#endif
+
+ if (copy_to_user(comp->data, iobuf,
+ min((int)comp->len, (int)RIDSIZE))) {
+ kfree (iobuf);
+ return -EFAULT;
+ }
+ kfree (iobuf);
+ return 0;
+
+ default:
+ return -EOPNOTSUPP; /* Blarg! */
+ }
+ if(comp->len > RIDSIZE)
+ return -EINVAL;
+
+ if ((iobuf = kmalloc(RIDSIZE, GFP_KERNEL)) == NULL)
+ return -ENOMEM;
+
+ if (copy_from_user(iobuf,comp->data,comp->len)) {
+ kfree (iobuf);
+ return -EFAULT;
+ }
+
+ if (comp->command == AIROPCFG) {
+ ConfigRid *cfg = (ConfigRid *)iobuf;
+
+ if (test_bit(FLAG_MIC_CAPABLE, &ai->flags))
+ cfg->opmode |= MODE_MIC;
+
+ if ((cfg->opmode & 0xFF) == MODE_STA_IBSS)
+ set_bit (FLAG_ADHOC, &ai->flags);
+ else
+ clear_bit (FLAG_ADHOC, &ai->flags);
+ }
+
+ if((*writer)(ai, ridcode, iobuf,comp->len,1)) {
+ kfree (iobuf);
+ return -EIO;
+ }
+ kfree (iobuf);
+ return 0;
+}
+
+/*****************************************************************************
+ * Ancillary flash / mod functions much black magic lurkes here *
+ *****************************************************************************
+ */
+
+/*
+ * Flash command switch table
+ */
+
+int flashcard(struct net_device *dev, aironet_ioctl *comp) {
+ int z;
+ int cmdreset(struct airo_info *);
+ int setflashmode(struct airo_info *);
+ int flashgchar(struct airo_info *,int,int);
+ int flashpchar(struct airo_info *,int,int);
+ int flashputbuf(struct airo_info *);
+ int flashrestart(struct airo_info *,struct net_device *);
+
+ /* Only super-user can modify flash */
+ if (!capable(CAP_NET_ADMIN))
+ return -EPERM;
+
+ switch(comp->command)
+ {
+ case AIROFLSHRST:
+ return cmdreset((struct airo_info *)dev->priv);
+
+ case AIROFLSHSTFL:
+ if (!((struct airo_info *)dev->priv)->flash &&
+ (((struct airo_info *)dev->priv)->flash = kmalloc (FLASHSIZE, GFP_KERNEL)) == NULL)
+ return -ENOMEM;
+ return setflashmode((struct airo_info *)dev->priv);
+
+ case AIROFLSHGCHR: /* Get char from aux */
+ if(comp->len != sizeof(int))
+ return -EINVAL;
+ if (copy_from_user(&z,comp->data,comp->len))
+ return -EFAULT;
+ return flashgchar((struct airo_info *)dev->priv,z,8000);
+
+ case AIROFLSHPCHR: /* Send char to card. */
+ if(comp->len != sizeof(int))
+ return -EINVAL;
+ if (copy_from_user(&z,comp->data,comp->len))
+ return -EFAULT;
+ return flashpchar((struct airo_info *)dev->priv,z,8000);
+
+ case AIROFLPUTBUF: /* Send 32k to card */
+ if (!((struct airo_info *)dev->priv)->flash)
+ return -ENOMEM;
+ if(comp->len > FLASHSIZE)
+ return -EINVAL;
+ if(copy_from_user(((struct airo_info *)dev->priv)->flash,comp->data,comp->len))
+ return -EFAULT;
+
+ flashputbuf((struct airo_info *)dev->priv);
+ return 0;
+
+ case AIRORESTART:
+ if(flashrestart((struct airo_info *)dev->priv,dev))
+ return -EIO;
+ return 0;
+ }
+ return -EINVAL;
+}
+
+#define FLASH_COMMAND 0x7e7e
+
+/*
+ * STEP 1)
+ * Disable MAC and do soft reset on
+ * card.
+ */
+
+int cmdreset(struct airo_info *ai) {
+ disable_MAC(ai, 1);
+
+ if(!waitbusy (ai)){
+ printk(KERN_INFO "Waitbusy hang before RESET\n");
+ return -EBUSY;
+ }
+
+ OUT4500(ai,COMMAND,CMD_SOFTRESET);
+
+ ssleep(1); /* WAS 600 12/7/00 */
+
+ if(!waitbusy (ai)){
+ printk(KERN_INFO "Waitbusy hang AFTER RESET\n");
+ return -EBUSY;
+ }
+ return 0;
+}
+
+/* STEP 2)
+ * Put the card in legendary flash
+ * mode
+ */
+
+int setflashmode (struct airo_info *ai) {
+ set_bit (FLAG_FLASHING, &ai->flags);
+
+ OUT4500(ai, SWS0, FLASH_COMMAND);
+ OUT4500(ai, SWS1, FLASH_COMMAND);
+ if (probe) {
+ OUT4500(ai, SWS0, FLASH_COMMAND);
+ OUT4500(ai, COMMAND,0x10);
+ } else {
+ OUT4500(ai, SWS2, FLASH_COMMAND);
+ OUT4500(ai, SWS3, FLASH_COMMAND);
+ OUT4500(ai, COMMAND,0);
+ }
+ msleep(500); /* 500ms delay */
+
+ if(!waitbusy(ai)) {
+ clear_bit (FLAG_FLASHING, &ai->flags);
+ printk(KERN_INFO "Waitbusy hang after setflash mode\n");
+ return -EIO;
+ }
+ return 0;
+}
+
+/* Put character to SWS0 wait for dwelltime
+ * x 50us for echo .
+ */
+
+int flashpchar(struct airo_info *ai,int byte,int dwelltime) {
+ int echo;
+ int waittime;
+
+ byte |= 0x8000;
+
+ if(dwelltime == 0 )
+ dwelltime = 200;
+
+ waittime=dwelltime;
+
+ /* Wait for busy bit d15 to go false indicating buffer empty */
+ while ((IN4500 (ai, SWS0) & 0x8000) && waittime > 0) {
+ udelay (50);
+ waittime -= 50;
+ }
+
+ /* timeout for busy clear wait */
+ if(waittime <= 0 ){
+ printk(KERN_INFO "flash putchar busywait timeout! \n");
+ return -EBUSY;
+ }
+
+ /* Port is clear now write byte and wait for it to echo back */
+ do {
+ OUT4500(ai,SWS0,byte);
+ udelay(50);
+ dwelltime -= 50;
+ echo = IN4500(ai,SWS1);
+ } while (dwelltime >= 0 && echo != byte);
+
+ OUT4500(ai,SWS1,0);
+
+ return (echo == byte) ? 0 : -EIO;
+}
+
+/*
+ * Get a character from the card matching matchbyte
+ * Step 3)
+ */
+int flashgchar(struct airo_info *ai,int matchbyte,int dwelltime){
+ int rchar;
+ unsigned char rbyte=0;
+
+ do {
+ rchar = IN4500(ai,SWS1);
+
+ if(dwelltime && !(0x8000 & rchar)){
+ dwelltime -= 10;
+ mdelay(10);
+ continue;
+ }
+ rbyte = 0xff & rchar;
+
+ if( (rbyte == matchbyte) && (0x8000 & rchar) ){
+ OUT4500(ai,SWS1,0);
+ return 0;
+ }
+ if( rbyte == 0x81 || rbyte == 0x82 || rbyte == 0x83 || rbyte == 0x1a || 0xffff == rchar)
+ break;
+ OUT4500(ai,SWS1,0);
+
+ }while(dwelltime > 0);
+ return -EIO;
+}
+
+/*
+ * Transfer 32k of firmware data from user buffer to our buffer and
+ * send to the card
+ */
+
+int flashputbuf(struct airo_info *ai){
+ int nwords;
+
+ /* Write stuff */
+ if (test_bit(FLAG_MPI,&ai->flags))
+ memcpy_toio(ai->pciaux + 0x8000, ai->flash, FLASHSIZE);
+ else {
+ OUT4500(ai,AUXPAGE,0x100);
+ OUT4500(ai,AUXOFF,0);
+
+ for(nwords=0;nwords != FLASHSIZE / 2;nwords++){
+ OUT4500(ai,AUXDATA,ai->flash[nwords] & 0xffff);
+ }
+ }
+ OUT4500(ai,SWS0,0x8000);
+
+ return 0;
+}
+
+/*
+ *
+ */
+int flashrestart(struct airo_info *ai,struct net_device *dev){
+ int i,status;
+
+ ssleep(1); /* Added 12/7/00 */
+ clear_bit (FLAG_FLASHING, &ai->flags);
+ if (test_bit(FLAG_MPI, &ai->flags)) {
+ status = mpi_init_descriptors(ai);
+ if (status != SUCCESS)
+ return status;
+ }
+ status = setup_card(ai, dev->dev_addr, 1);
+
+ if (!test_bit(FLAG_MPI,&ai->flags))
+ for( i = 0; i < MAX_FIDS; i++ ) {
+ ai->fids[i] = transmit_allocate
+ ( ai, 2312, i >= MAX_FIDS / 2 );
+ }
+
+ ssleep(1); /* Added 12/7/00 */
+ return status;
+}
+#endif /* CISCO_EXT */
+
+/*
+ This program is free software; you can redistribute it and/or
+ modify it under the terms of the GNU General Public License
+ as published by the Free Software Foundation; either version 2
+ of the License, or (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ In addition:
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions
+ are met:
+
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. The name of the author may not be used to endorse or promote
+ products derived from this software without specific prior written
+ permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+ IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
+ INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+*/
+
+module_init(airo_init_module);
+module_exit(airo_cleanup_module);
diff --git a/drivers/net/wireless/airo_cs.c b/drivers/net/wireless/airo_cs.c
new file mode 100644
index 0000000..fbf53af
--- /dev/null
+++ b/drivers/net/wireless/airo_cs.c
@@ -0,0 +1,622 @@
+/*======================================================================
+
+ Aironet driver for 4500 and 4800 series cards
+
+ This code is released under both the GPL version 2 and BSD licenses.
+ Either license may be used. The respective licenses are found at
+ the end of this file.
+
+ This code was developed by Benjamin Reed <breed@users.sourceforge.net>
+ including portions of which come from the Aironet PC4500
+ Developer's Reference Manual and used with permission. Copyright
+ (C) 1999 Benjamin Reed. All Rights Reserved. Permission to use
+ code in the Developer's manual was granted for this driver by
+ Aironet.
+
+ In addition this module was derived from dummy_cs.
+ The initial developer of dummy_cs is David A. Hinds
+ <dahinds@users.sourceforge.net>. Portions created by David A. Hinds
+ are Copyright (C) 1999 David A. Hinds. All Rights Reserved.
+
+======================================================================*/
+
+#include <linux/config.h>
+#ifdef __IN_PCMCIA_PACKAGE__
+#include <pcmcia/k_compat.h>
+#endif
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/netdevice.h>
+
+#include <pcmcia/version.h>
+#include <pcmcia/cs_types.h>
+#include <pcmcia/cs.h>
+#include <pcmcia/cistpl.h>
+#include <pcmcia/cisreg.h>
+#include <pcmcia/ds.h>
+
+#include <asm/io.h>
+#include <asm/system.h>
+
+/*
+ All the PCMCIA modules use PCMCIA_DEBUG to control debugging. If
+ you do not define PCMCIA_DEBUG at all, all the debug code will be
+ left out. If you compile with PCMCIA_DEBUG=0, the debug code will
+ be present but disabled -- but it can then be enabled for specific
+ modules at load time with a 'pc_debug=#' option to insmod.
+*/
+#ifdef PCMCIA_DEBUG
+static int pc_debug = PCMCIA_DEBUG;
+module_param(pc_debug, int, 0);
+static char *version = "$Revision: 1.2 $";
+#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args);
+#else
+#define DEBUG(n, args...)
+#endif
+
+/*====================================================================*/
+
+MODULE_AUTHOR("Benjamin Reed");
+MODULE_DESCRIPTION("Support for Cisco/Aironet 802.11 wireless ethernet \
+ cards. This is the module that links the PCMCIA card \
+ with the airo module.");
+MODULE_LICENSE("Dual BSD/GPL");
+MODULE_SUPPORTED_DEVICE("Aironet 4500, 4800 and Cisco 340 PCMCIA cards");
+
+/*====================================================================*/
+
+/*
+ The event() function is this driver's Card Services event handler.
+ It will be called by Card Services when an appropriate card status
+ event is received. The config() and release() entry points are
+ used to configure or release a socket, in response to card
+ insertion and ejection events. They are invoked from the airo_cs
+ event handler.
+*/
+
+struct net_device *init_airo_card( int, int, int, struct device * );
+void stop_airo_card( struct net_device *, int );
+int reset_airo_card( struct net_device * );
+
+static void airo_config(dev_link_t *link);
+static void airo_release(dev_link_t *link);
+static int airo_event(event_t event, int priority,
+ event_callback_args_t *args);
+
+/*
+ The attach() and detach() entry points are used to create and destroy
+ "instances" of the driver, where each instance represents everything
+ needed to manage one actual PCMCIA card.
+*/
+
+static dev_link_t *airo_attach(void);
+static void airo_detach(dev_link_t *);
+
+/*
+ You'll also need to prototype all the functions that will actually
+ be used to talk to your device. See 'pcmem_cs' for a good example
+ of a fully self-sufficient driver; the other drivers rely more or
+ less on other parts of the kernel.
+*/
+
+/*
+ The dev_info variable is the "key" that is used to match up this
+ device driver with appropriate cards, through the card configuration
+ database.
+*/
+
+static dev_info_t dev_info = "airo_cs";
+
+/*
+ A linked list of "instances" of the aironet device. Each actual
+ PCMCIA card corresponds to one device instance, and is described
+ by one dev_link_t structure (defined in ds.h).
+
+ You may not want to use a linked list for this -- for example, the
+ memory card driver uses an array of dev_link_t pointers, where minor
+ device numbers are used to derive the corresponding array index.
+*/
+
+static dev_link_t *dev_list = NULL;
+
+/*
+ A dev_link_t structure has fields for most things that are needed
+ to keep track of a socket, but there will usually be some device
+ specific information that also needs to be kept track of. The
+ 'priv' pointer in a dev_link_t structure can be used to point to
+ a device-specific private data structure, like this.
+
+ A driver needs to provide a dev_node_t structure for each device
+ on a card. In some cases, there is only one device per card (for
+ example, ethernet cards, modems). In other cases, there may be
+ many actual or logical devices (SCSI adapters, memory cards with
+ multiple partitions). The dev_node_t structures need to be kept
+ in a linked list starting at the 'dev' field of a dev_link_t
+ structure. We allocate them in the card's private data structure,
+ because they generally shouldn't be allocated dynamically.
+
+ In this case, we also provide a flag to indicate if a device is
+ "stopped" due to a power management event, or card ejection. The
+ device IO routines can use a flag like this to throttle IO to a
+ card that is not ready to accept it.
+*/
+
+typedef struct local_info_t {
+ dev_node_t node;
+ struct net_device *eth_dev;
+} local_info_t;
+
+/*======================================================================
+
+ airo_attach() creates an "instance" of the driver, allocating
+ local data structures for one device. The device is registered
+ with Card Services.
+
+ The dev_link structure is initialized, but we don't actually
+ configure the card at this point -- we wait until we receive a
+ card insertion event.
+
+ ======================================================================*/
+
+static dev_link_t *airo_attach(void)
+{
+ client_reg_t client_reg;
+ dev_link_t *link;
+ local_info_t *local;
+ int ret;
+
+ DEBUG(0, "airo_attach()\n");
+
+ /* Initialize the dev_link_t structure */
+ link = kmalloc(sizeof(struct dev_link_t), GFP_KERNEL);
+ if (!link) {
+ printk(KERN_ERR "airo_cs: no memory for new device\n");
+ return NULL;
+ }
+ memset(link, 0, sizeof(struct dev_link_t));
+
+ /* Interrupt setup */
+ link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
+ link->irq.IRQInfo1 = IRQ_LEVEL_ID;
+ link->irq.Handler = NULL;
+
+ /*
+ General socket configuration defaults can go here. In this
+ client, we assume very little, and rely on the CIS for almost
+ everything. In most clients, many details (i.e., number, sizes,
+ and attributes of IO windows) are fixed by the nature of the
+ device, and can be hard-wired here.
+ */
+ link->conf.Attributes = 0;
+ link->conf.Vcc = 50;
+ link->conf.IntType = INT_MEMORY_AND_IO;
+
+ /* Allocate space for private device-specific data */
+ local = kmalloc(sizeof(local_info_t), GFP_KERNEL);
+ if (!local) {
+ printk(KERN_ERR "airo_cs: no memory for new device\n");
+ kfree (link);
+ return NULL;
+ }
+ memset(local, 0, sizeof(local_info_t));
+ link->priv = local;
+
+ /* Register with Card Services */
+ link->next = dev_list;
+ dev_list = link;
+ client_reg.dev_info = &dev_info;
+ client_reg.EventMask =
+ CS_EVENT_CARD_INSERTION | CS_EVENT_CARD_REMOVAL |
+ CS_EVENT_RESET_PHYSICAL | CS_EVENT_CARD_RESET |
+ CS_EVENT_PM_SUSPEND | CS_EVENT_PM_RESUME;
+ client_reg.event_handler = &airo_event;
+ client_reg.Version = 0x0210;
+ client_reg.event_callback_args.client_data = link;
+ ret = pcmcia_register_client(&link->handle, &client_reg);
+ if (ret != 0) {
+ cs_error(link->handle, RegisterClient, ret);
+ airo_detach(link);
+ return NULL;
+ }
+
+ return link;
+} /* airo_attach */
+
+/*======================================================================
+
+ This deletes a driver "instance". The device is de-registered
+ with Card Services. If it has been released, all local data
+ structures are freed. Otherwise, the structures will be freed
+ when the device is released.
+
+ ======================================================================*/
+
+static void airo_detach(dev_link_t *link)
+{
+ dev_link_t **linkp;
+
+ DEBUG(0, "airo_detach(0x%p)\n", link);
+
+ /* Locate device structure */
+ for (linkp = &dev_list; *linkp; linkp = &(*linkp)->next)
+ if (*linkp == link) break;
+ if (*linkp == NULL)
+ return;
+
+ if (link->state & DEV_CONFIG)
+ airo_release(link);
+
+ if ( ((local_info_t*)link->priv)->eth_dev ) {
+ stop_airo_card( ((local_info_t*)link->priv)->eth_dev, 0 );
+ }
+ ((local_info_t*)link->priv)->eth_dev = NULL;
+
+ /* Break the link with Card Services */
+ if (link->handle)
+ pcmcia_deregister_client(link->handle);
+
+
+
+ /* Unlink device structure, free pieces */
+ *linkp = link->next;
+ if (link->priv) {
+ kfree(link->priv);
+ }
+ kfree(link);
+
+} /* airo_detach */
+
+/*======================================================================
+
+ airo_config() is scheduled to run after a CARD_INSERTION event
+ is received, to configure the PCMCIA socket, and to make the
+ device available to the system.
+
+ ======================================================================*/
+
+#define CS_CHECK(fn, ret) \
+do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
+
+static void airo_config(dev_link_t *link)
+{
+ client_handle_t handle;
+ tuple_t tuple;
+ cisparse_t parse;
+ local_info_t *dev;
+ int last_fn, last_ret;
+ u_char buf[64];
+ win_req_t req;
+ memreq_t map;
+
+ handle = link->handle;
+ dev = link->priv;
+
+ DEBUG(0, "airo_config(0x%p)\n", link);
+
+ /*
+ This reads the card's CONFIG tuple to find its configuration
+ registers.
+ */
+ tuple.DesiredTuple = CISTPL_CONFIG;
+ tuple.Attributes = 0;
+ tuple.TupleData = buf;
+ tuple.TupleDataMax = sizeof(buf);
+ tuple.TupleOffset = 0;
+ CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(handle, &tuple));
+ CS_CHECK(GetTupleData, pcmcia_get_tuple_data(handle, &tuple));
+ CS_CHECK(ParseTuple, pcmcia_parse_tuple(handle, &tuple, &parse));
+ link->conf.ConfigBase = parse.config.base;
+ link->conf.Present = parse.config.rmask[0];
+
+ /* Configure card */
+ link->state |= DEV_CONFIG;
+
+ /*
+ In this loop, we scan the CIS for configuration table entries,
+ each of which describes a valid card configuration, including
+ voltage, IO window, memory window, and interrupt settings.
+
+ We make no assumptions about the card to be configured: we use
+ just the information available in the CIS. In an ideal world,
+ this would work for any PCMCIA card, but it requires a complete
+ and accurate CIS. In practice, a driver usually "knows" most of
+ these things without consulting the CIS, and most client drivers
+ will only use the CIS to fill in implementation-defined details.
+ */
+ tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
+ CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(handle, &tuple));
+ while (1) {
+ cistpl_cftable_entry_t dflt = { 0 };
+ cistpl_cftable_entry_t *cfg = &(parse.cftable_entry);
+ if (pcmcia_get_tuple_data(handle, &tuple) != 0 ||
+ pcmcia_parse_tuple(handle, &tuple, &parse) != 0)
+ goto next_entry;
+
+ if (cfg->flags & CISTPL_CFTABLE_DEFAULT) dflt = *cfg;
+ if (cfg->index == 0) goto next_entry;
+ link->conf.ConfigIndex = cfg->index;
+
+ /* Does this card need audio output? */
+ if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
+ link->conf.Attributes |= CONF_ENABLE_SPKR;
+ link->conf.Status = CCSR_AUDIO_ENA;
+ }
+
+ /* Use power settings for Vcc and Vpp if present */
+ /* Note that the CIS values need to be rescaled */
+ if (cfg->vcc.present & (1<<CISTPL_POWER_VNOM))
+ link->conf.Vcc = cfg->vcc.param[CISTPL_POWER_VNOM]/10000;
+ else if (dflt.vcc.present & (1<<CISTPL_POWER_VNOM))
+ link->conf.Vcc = dflt.vcc.param[CISTPL_POWER_VNOM]/10000;
+
+ if (cfg->vpp1.present & (1<<CISTPL_POWER_VNOM))
+ link->conf.Vpp1 = link->conf.Vpp2 =
+ cfg->vpp1.param[CISTPL_POWER_VNOM]/10000;
+ else if (dflt.vpp1.present & (1<<CISTPL_POWER_VNOM))
+ link->conf.Vpp1 = link->conf.Vpp2 =
+ dflt.vpp1.param[CISTPL_POWER_VNOM]/10000;
+
+ /* Do we need to allocate an interrupt? */
+ if (cfg->irq.IRQInfo1 || dflt.irq.IRQInfo1)
+ link->conf.Attributes |= CONF_ENABLE_IRQ;
+
+ /* IO window settings */
+ link->io.NumPorts1 = link->io.NumPorts2 = 0;
+ if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) {
+ cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt.io;
+ link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
+ if (!(io->flags & CISTPL_IO_8BIT))
+ link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
+ if (!(io->flags & CISTPL_IO_16BIT))
+ link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
+ link->io.BasePort1 = io->win[0].base;
+ link->io.NumPorts1 = io->win[0].len;
+ if (io->nwin > 1) {
+ link->io.Attributes2 = link->io.Attributes1;
+ link->io.BasePort2 = io->win[1].base;
+ link->io.NumPorts2 = io->win[1].len;
+ }
+ }
+
+ /* This reserves IO space but doesn't actually enable it */
+ if (pcmcia_request_io(link->handle, &link->io) != 0)
+ goto next_entry;
+
+ /*
+ Now set up a common memory window, if needed. There is room
+ in the dev_link_t structure for one memory window handle,
+ but if the base addresses need to be saved, or if multiple
+ windows are needed, the info should go in the private data
+ structure for this device.
+
+ Note that the memory window base is a physical address, and
+ needs to be mapped to virtual space with ioremap() before it
+ is used.
+ */
+ if ((cfg->mem.nwin > 0) || (dflt.mem.nwin > 0)) {
+ cistpl_mem_t *mem =
+ (cfg->mem.nwin) ? &cfg->mem : &dflt.mem;
+ req.Attributes = WIN_DATA_WIDTH_16|WIN_MEMORY_TYPE_CM;
+ req.Base = mem->win[0].host_addr;
+ req.Size = mem->win[0].len;
+ req.AccessSpeed = 0;
+ if (pcmcia_request_window(&link->handle, &req, &link->win) != 0)
+ goto next_entry;
+ map.Page = 0; map.CardOffset = mem->win[0].card_addr;
+ if (pcmcia_map_mem_page(link->win, &map) != 0)
+ goto next_entry;
+ }
+ /* If we got this far, we're cool! */
+ break;
+
+ next_entry:
+ CS_CHECK(GetNextTuple, pcmcia_get_next_tuple(handle, &tuple));
+ }
+
+ /*
+ Allocate an interrupt line. Note that this does not assign a
+ handler to the interrupt, unless the 'Handler' member of the
+ irq structure is initialized.
+ */
+ if (link->conf.Attributes & CONF_ENABLE_IRQ)
+ CS_CHECK(RequestIRQ, pcmcia_request_irq(link->handle, &link->irq));
+
+ /*
+ This actually configures the PCMCIA socket -- setting up
+ the I/O windows and the interrupt mapping, and putting the
+ card and host interface into "Memory and IO" mode.
+ */
+ CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link->handle, &link->conf));
+ ((local_info_t*)link->priv)->eth_dev =
+ init_airo_card( link->irq.AssignedIRQ,
+ link->io.BasePort1, 1, &handle_to_dev(handle) );
+ if (!((local_info_t*)link->priv)->eth_dev) goto cs_failed;
+
+ /*
+ At this point, the dev_node_t structure(s) need to be
+ initialized and arranged in a linked list at link->dev.
+ */
+ strcpy(dev->node.dev_name, ((local_info_t*)link->priv)->eth_dev->name );
+ dev->node.major = dev->node.minor = 0;
+ link->dev = &dev->node;
+
+ /* Finally, report what we've done */
+ printk(KERN_INFO "%s: index 0x%02x: Vcc %d.%d",
+ dev->node.dev_name, link->conf.ConfigIndex,
+ link->conf.Vcc/10, link->conf.Vcc%10);
+ if (link->conf.Vpp1)
+ printk(", Vpp %d.%d", link->conf.Vpp1/10, link->conf.Vpp1%10);
+ if (link->conf.Attributes & CONF_ENABLE_IRQ)
+ printk(", irq %d", link->irq.AssignedIRQ);
+ if (link->io.NumPorts1)
+ printk(", io 0x%04x-0x%04x", link->io.BasePort1,
+ link->io.BasePort1+link->io.NumPorts1-1);
+ if (link->io.NumPorts2)
+ printk(" & 0x%04x-0x%04x", link->io.BasePort2,
+ link->io.BasePort2+link->io.NumPorts2-1);
+ if (link->win)
+ printk(", mem 0x%06lx-0x%06lx", req.Base,
+ req.Base+req.Size-1);
+ printk("\n");
+
+ link->state &= ~DEV_CONFIG_PENDING;
+ return;
+
+ cs_failed:
+ cs_error(link->handle, last_fn, last_ret);
+ airo_release(link);
+
+} /* airo_config */
+
+/*======================================================================
+
+ After a card is removed, airo_release() will unregister the
+ device, and release the PCMCIA configuration. If the device is
+ still open, this will be postponed until it is closed.
+
+ ======================================================================*/
+
+static void airo_release(dev_link_t *link)
+{
+ DEBUG(0, "airo_release(0x%p)\n", link);
+
+ /* Unlink the device chain */
+ link->dev = NULL;
+
+ /*
+ In a normal driver, additional code may be needed to release
+ other kernel data structures associated with this device.
+ */
+
+ /* Don't bother checking to see if these succeed or not */
+ if (link->win)
+ pcmcia_release_window(link->win);
+ pcmcia_release_configuration(link->handle);
+ if (link->io.NumPorts1)
+ pcmcia_release_io(link->handle, &link->io);
+ if (link->irq.AssignedIRQ)
+ pcmcia_release_irq(link->handle, &link->irq);
+ link->state &= ~DEV_CONFIG;
+}
+
+/*======================================================================
+
+ The card status event handler. Mostly, this schedules other
+ stuff to run after an event is received.
+
+ When a CARD_REMOVAL event is received, we immediately set a
+ private flag to block future accesses to this device. All the
+ functions that actually access the device should check this flag
+ to make sure the card is still present.
+
+ ======================================================================*/
+
+static int airo_event(event_t event, int priority,
+ event_callback_args_t *args)
+{
+ dev_link_t *link = args->client_data;
+ local_info_t *local = link->priv;
+
+ DEBUG(1, "airo_event(0x%06x)\n", event);
+
+ switch (event) {
+ case CS_EVENT_CARD_REMOVAL:
+ link->state &= ~DEV_PRESENT;
+ if (link->state & DEV_CONFIG) {
+ netif_device_detach(local->eth_dev);
+ airo_release(link);
+ }
+ break;
+ case CS_EVENT_CARD_INSERTION:
+ link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
+ airo_config(link);
+ break;
+ case CS_EVENT_PM_SUSPEND:
+ link->state |= DEV_SUSPEND;
+ /* Fall through... */
+ case CS_EVENT_RESET_PHYSICAL:
+ if (link->state & DEV_CONFIG) {
+ netif_device_detach(local->eth_dev);
+ pcmcia_release_configuration(link->handle);
+ }
+ break;
+ case CS_EVENT_PM_RESUME:
+ link->state &= ~DEV_SUSPEND;
+ /* Fall through... */
+ case CS_EVENT_CARD_RESET:
+ if (link->state & DEV_CONFIG) {
+ pcmcia_request_configuration(link->handle, &link->conf);
+ reset_airo_card(local->eth_dev);
+ netif_device_attach(local->eth_dev);
+ }
+ break;
+ }
+ return 0;
+} /* airo_event */
+
+static struct pcmcia_driver airo_driver = {
+ .owner = THIS_MODULE,
+ .drv = {
+ .name = "airo_cs",
+ },
+ .attach = airo_attach,
+ .detach = airo_detach,
+};
+
+static int airo_cs_init(void)
+{
+ return pcmcia_register_driver(&airo_driver);
+}
+
+static void airo_cs_cleanup(void)
+{
+ pcmcia_unregister_driver(&airo_driver);
+ BUG_ON(dev_list != NULL);
+}
+
+/*
+ This program is free software; you can redistribute it and/or
+ modify it under the terms of the GNU General Public License
+ as published by the Free Software Foundation; either version 2
+ of the License, or (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ In addition:
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions
+ are met:
+
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. The name of the author may not be used to endorse or promote
+ products derived from this software without specific prior written
+ permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+ IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
+ INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+*/
+
+module_init(airo_cs_init);
+module_exit(airo_cs_cleanup);
diff --git a/drivers/net/wireless/airport.c b/drivers/net/wireless/airport.c
new file mode 100644
index 0000000..a1dc2a1
--- /dev/null
+++ b/drivers/net/wireless/airport.c
@@ -0,0 +1,304 @@
+/* airport.c
+ *
+ * A driver for "Hermes" chipset based Apple Airport wireless
+ * card.
+ *
+ * Copyright notice & release notes in file orinoco.c
+ *
+ * Note specific to airport stub:
+ *
+ * 0.05 : first version of the new split driver
+ * 0.06 : fix possible hang on powerup, add sleep support
+ */
+
+#define DRIVER_NAME "airport"
+#define PFX DRIVER_NAME ": "
+
+#include <linux/config.h>
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/ioport.h>
+#include <linux/netdevice.h>
+#include <linux/if_arp.h>
+#include <linux/etherdevice.h>
+#include <linux/wireless.h>
+
+#include <asm/io.h>
+#include <asm/system.h>
+#include <asm/current.h>
+#include <asm/prom.h>
+#include <asm/machdep.h>
+#include <asm/pmac_feature.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+
+#include "orinoco.h"
+
+#define AIRPORT_IO_LEN (0x1000) /* one page */
+
+struct airport {
+ struct macio_dev *mdev;
+ void __iomem *vaddr;
+ int irq_requested;
+ int ndev_registered;
+};
+
+static int
+airport_suspend(struct macio_dev *mdev, u32 state)
+{
+ struct net_device *dev = dev_get_drvdata(&mdev->ofdev.dev);
+ struct orinoco_private *priv = netdev_priv(dev);
+ unsigned long flags;
+ int err;
+
+ printk(KERN_DEBUG "%s: Airport entering sleep mode\n", dev->name);
+
+ err = orinoco_lock(priv, &flags);
+ if (err) {
+ printk(KERN_ERR "%s: hw_unavailable on PBOOK_SLEEP_NOW\n",
+ dev->name);
+ return 0;
+ }
+
+ err = __orinoco_down(dev);
+ if (err)
+ printk(KERN_WARNING "%s: PBOOK_SLEEP_NOW: Error %d downing interface\n",
+ dev->name, err);
+
+ netif_device_detach(dev);
+
+ priv->hw_unavailable++;
+
+ orinoco_unlock(priv, &flags);
+
+ disable_irq(dev->irq);
+ pmac_call_feature(PMAC_FTR_AIRPORT_ENABLE, macio_get_of_node(mdev), 0, 0);
+
+ return 0;
+}
+
+static int
+airport_resume(struct macio_dev *mdev)
+{
+ struct net_device *dev = dev_get_drvdata(&mdev->ofdev.dev);
+ struct orinoco_private *priv = netdev_priv(dev);
+ unsigned long flags;
+ int err;
+
+ printk(KERN_DEBUG "%s: Airport waking up\n", dev->name);
+
+ pmac_call_feature(PMAC_FTR_AIRPORT_ENABLE, macio_get_of_node(mdev), 0, 1);
+ msleep(200);
+
+ enable_irq(dev->irq);
+
+ err = orinoco_reinit_firmware(dev);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d re-initializing firmware on PBOOK_WAKE\n",
+ dev->name, err);
+ return 0;
+ }
+
+ spin_lock_irqsave(&priv->lock, flags);
+
+ netif_device_attach(dev);
+
+ priv->hw_unavailable--;
+
+ if (priv->open && (! priv->hw_unavailable)) {
+ err = __orinoco_up(dev);
+ if (err)
+ printk(KERN_ERR "%s: Error %d restarting card on PBOOK_WAKE\n",
+ dev->name, err);
+ }
+
+
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ return 0;
+}
+
+static int
+airport_detach(struct macio_dev *mdev)
+{
+ struct net_device *dev = dev_get_drvdata(&mdev->ofdev.dev);
+ struct orinoco_private *priv = netdev_priv(dev);
+ struct airport *card = priv->card;
+
+ if (card->ndev_registered)
+ unregister_netdev(dev);
+ card->ndev_registered = 0;
+
+ if (card->irq_requested)
+ free_irq(dev->irq, dev);
+ card->irq_requested = 0;
+
+ if (card->vaddr)
+ iounmap(card->vaddr);
+ card->vaddr = NULL;
+
+ macio_release_resource(mdev, 0);
+
+ pmac_call_feature(PMAC_FTR_AIRPORT_ENABLE, macio_get_of_node(mdev), 0, 0);
+ ssleep(1);
+
+ macio_set_drvdata(mdev, NULL);
+ free_orinocodev(dev);
+
+ return 0;
+}
+
+static int airport_hard_reset(struct orinoco_private *priv)
+{
+ /* It would be nice to power cycle the Airport for a real hard
+ * reset, but for some reason although it appears to
+ * re-initialize properly, it falls in a screaming heap
+ * shortly afterwards. */
+#if 0
+ struct net_device *dev = priv->ndev;
+ struct airport *card = priv->card;
+
+ /* Vitally important. If we don't do this it seems we get an
+ * interrupt somewhere during the power cycle, since
+ * hw_unavailable is already set it doesn't get ACKed, we get
+ * into an interrupt loop and the the PMU decides to turn us
+ * off. */
+ disable_irq(dev->irq);
+
+ pmac_call_feature(PMAC_FTR_AIRPORT_ENABLE, macio_get_of_node(card->mdev), 0, 0);
+ ssleep(1);
+ pmac_call_feature(PMAC_FTR_AIRPORT_ENABLE, macio_get_of_node(card->mdev), 0, 1);
+ ssleep(1);
+
+ enable_irq(dev->irq);
+ ssleep(1);
+#endif
+
+ return 0;
+}
+
+static int
+airport_attach(struct macio_dev *mdev, const struct of_match *match)
+{
+ struct orinoco_private *priv;
+ struct net_device *dev;
+ struct airport *card;
+ unsigned long phys_addr;
+ hermes_t *hw;
+
+ if (macio_resource_count(mdev) < 1 || macio_irq_count(mdev) < 1) {
+ printk(KERN_ERR PFX "Wrong interrupt/addresses in OF tree\n");
+ return -ENODEV;
+ }
+
+ /* Allocate space for private device-specific data */
+ dev = alloc_orinocodev(sizeof(*card), airport_hard_reset);
+ if (! dev) {
+ printk(KERN_ERR PFX "Cannot allocate network device\n");
+ return -ENODEV;
+ }
+ priv = netdev_priv(dev);
+ card = priv->card;
+
+ hw = &priv->hw;
+ card->mdev = mdev;
+
+ if (macio_request_resource(mdev, 0, "airport")) {
+ printk(KERN_ERR PFX "can't request IO resource !\n");
+ free_orinocodev(dev);
+ return -EBUSY;
+ }
+
+ SET_MODULE_OWNER(dev);
+ SET_NETDEV_DEV(dev, &mdev->ofdev.dev);
+
+ macio_set_drvdata(mdev, dev);
+
+ /* Setup interrupts & base address */
+ dev->irq = macio_irq(mdev, 0);
+ phys_addr = macio_resource_start(mdev, 0); /* Physical address */
+ printk(KERN_DEBUG PFX "Physical address %lx\n", phys_addr);
+ dev->base_addr = phys_addr;
+ card->vaddr = ioremap(phys_addr, AIRPORT_IO_LEN);
+ if (!card->vaddr) {
+ printk(KERN_ERR PFX "ioremap() failed\n");
+ goto failed;
+ }
+
+ hermes_struct_init(hw, card->vaddr, HERMES_16BIT_REGSPACING);
+
+ /* Power up card */
+ pmac_call_feature(PMAC_FTR_AIRPORT_ENABLE, macio_get_of_node(mdev), 0, 1);
+ ssleep(1);
+
+ /* Reset it before we get the interrupt */
+ hermes_init(hw);
+
+ if (request_irq(dev->irq, orinoco_interrupt, 0, dev->name, dev)) {
+ printk(KERN_ERR PFX "Couldn't get IRQ %d\n", dev->irq);
+ goto failed;
+ }
+ card->irq_requested = 1;
+
+ /* Tell the stack we exist */
+ if (register_netdev(dev) != 0) {
+ printk(KERN_ERR PFX "register_netdev() failed\n");
+ goto failed;
+ }
+ printk(KERN_DEBUG PFX "Card registered for interface %s\n", dev->name);
+ card->ndev_registered = 1;
+ return 0;
+ failed:
+ airport_detach(mdev);
+ return -ENODEV;
+} /* airport_attach */
+
+
+static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION
+ " (Benjamin Herrenschmidt <benh@kernel.crashing.org>)";
+MODULE_AUTHOR("Benjamin Herrenschmidt <benh@kernel.crashing.org>");
+MODULE_DESCRIPTION("Driver for the Apple Airport wireless card.");
+MODULE_LICENSE("Dual MPL/GPL");
+
+static struct of_match airport_match[] =
+{
+ {
+ .name = "radio",
+ .type = OF_ANY_MATCH,
+ .compatible = OF_ANY_MATCH
+ },
+ {},
+};
+
+static struct macio_driver airport_driver =
+{
+ .name = DRIVER_NAME,
+ .match_table = airport_match,
+ .probe = airport_attach,
+ .remove = airport_detach,
+ .suspend = airport_suspend,
+ .resume = airport_resume,
+};
+
+static int __init
+init_airport(void)
+{
+ printk(KERN_DEBUG "%s\n", version);
+
+ return macio_register_driver(&airport_driver);
+}
+
+static void __exit
+exit_airport(void)
+{
+ return macio_unregister_driver(&airport_driver);
+}
+
+module_init(init_airport);
+module_exit(exit_airport);
diff --git a/drivers/net/wireless/arlan-main.c b/drivers/net/wireless/arlan-main.c
new file mode 100644
index 0000000..4f304c6e
--- /dev/null
+++ b/drivers/net/wireless/arlan-main.c
@@ -0,0 +1,1896 @@
+/*
+ * Copyright (C) 1997 Cullen Jennings
+ * Copyright (C) 1998 Elmer Joandiu, elmer@ylenurme.ee
+ * GNU General Public License applies
+ * This module provides support for the Arlan 655 card made by Aironet
+ */
+
+#include <linux/config.h>
+#include "arlan.h"
+
+#if BITS_PER_LONG != 32
+# error FIXME: this driver requires a 32-bit platform
+#endif
+
+static const char *arlan_version = "C.Jennigs 97 & Elmer.Joandi@ut.ee Oct'98, http://www.ylenurme.ee/~elmer/655/";
+
+struct net_device *arlan_device[MAX_ARLANS];
+
+static int SID = SIDUNKNOWN;
+static int radioNodeId = radioNodeIdUNKNOWN;
+static char encryptionKey[12] = {'a', 'b', 'c', 'd', 'e', 'f', 'g', 'h'};
+int arlan_debug = debugUNKNOWN;
+static int spreadingCode = spreadingCodeUNKNOWN;
+static int channelNumber = channelNumberUNKNOWN;
+static int channelSet = channelSetUNKNOWN;
+static int systemId = systemIdUNKNOWN;
+static int registrationMode = registrationModeUNKNOWN;
+static int keyStart;
+static int tx_delay_ms;
+static int retries = 5;
+static int tx_queue_len = 1;
+static int arlan_EEPROM_bad;
+
+#ifdef ARLAN_DEBUGGING
+
+static int arlan_entry_debug;
+static int arlan_exit_debug;
+static int testMemory = testMemoryUNKNOWN;
+static int irq = irqUNKNOWN;
+static int txScrambled = 1;
+static int mdebug;
+
+module_param(irq, int, 0);
+module_param(mdebug, int, 0);
+module_param(testMemory, int, 0);
+module_param(arlan_entry_debug, int, 0);
+module_param(arlan_exit_debug, int, 0);
+module_param(txScrambled, int, 0);
+MODULE_PARM_DESC(irq, "(unused)");
+MODULE_PARM_DESC(testMemory, "(unused)");
+MODULE_PARM_DESC(mdebug, "Arlan multicast debugging (0-1)");
+#endif
+
+module_param(arlan_debug, int, 0);
+module_param(spreadingCode, int, 0);
+module_param(channelNumber, int, 0);
+module_param(channelSet, int, 0);
+module_param(systemId, int, 0);
+module_param(registrationMode, int, 0);
+module_param(radioNodeId, int, 0);
+module_param(SID, int, 0);
+module_param(keyStart, int, 0);
+module_param(tx_delay_ms, int, 0);
+module_param(retries, int, 0);
+module_param(tx_queue_len, int, 0);
+module_param(arlan_EEPROM_bad, int, 0);
+MODULE_PARM_DESC(arlan_debug, "Arlan debug enable (0-1)");
+MODULE_PARM_DESC(retries, "Arlan maximum packet retransmisions");
+#ifdef ARLAN_ENTRY_EXIT_DEBUGGING
+MODULE_PARM_DESC(arlan_entry_debug, "Arlan driver function entry debugging");
+MODULE_PARM_DESC(arlan_exit_debug, "Arlan driver function exit debugging");
+MODULE_PARM_DESC(arlan_entry_and_exit_debug, "Arlan driver function entry and exit debugging");
+#else
+MODULE_PARM_DESC(arlan_entry_debug, "(ignored)");
+MODULE_PARM_DESC(arlan_exit_debug, "(ignored)");
+MODULE_PARM_DESC(arlan_entry_and_exit_debug, "(ignored)");
+#endif
+
+struct arlan_conf_stru arlan_conf[MAX_ARLANS];
+static int arlans_found;
+
+static int arlan_open(struct net_device *dev);
+static int arlan_tx(struct sk_buff *skb, struct net_device *dev);
+static irqreturn_t arlan_interrupt(int irq, void *dev_id, struct pt_regs *regs);
+static int arlan_close(struct net_device *dev);
+static struct net_device_stats *
+ arlan_statistics (struct net_device *dev);
+static void arlan_set_multicast (struct net_device *dev);
+static int arlan_hw_tx (struct net_device* dev, char *buf, int length );
+static int arlan_hw_config (struct net_device * dev);
+static void arlan_tx_done_interrupt (struct net_device * dev, int status);
+static void arlan_rx_interrupt (struct net_device * dev, u_char rxStatus, u_short, u_short);
+static void arlan_process_interrupt (struct net_device * dev);
+static void arlan_tx_timeout (struct net_device *dev);
+
+static inline long us2ticks(int us)
+{
+ return us * (1000000 / HZ);
+}
+
+
+#ifdef ARLAN_ENTRY_EXIT_DEBUGGING
+#define ARLAN_DEBUG_ENTRY(name) \
+ {\
+ struct timeval timev;\
+ do_gettimeofday(&timev);\
+ if (arlan_entry_debug || arlan_entry_and_exit_debug)\
+ printk("--->>>" name " %ld " "\n",((long int) timev.tv_sec * 1000000 + timev.tv_usec));\
+ }
+#define ARLAN_DEBUG_EXIT(name) \
+ {\
+ struct timeval timev;\
+ do_gettimeofday(&timev);\
+ if (arlan_exit_debug || arlan_entry_and_exit_debug)\
+ printk("<<<---" name " %ld " "\n",((long int) timev.tv_sec * 1000000 + timev.tv_usec) );\
+ }
+#else
+#define ARLAN_DEBUG_ENTRY(name)
+#define ARLAN_DEBUG_EXIT(name)
+#endif
+
+
+#define arlan_interrupt_ack(dev)\
+ clearClearInterrupt(dev);\
+ setClearInterrupt(dev);
+
+static inline int arlan_drop_tx(struct net_device *dev)
+{
+ struct arlan_private *priv = netdev_priv(dev);
+
+ priv->stats.tx_errors++;
+ if (priv->Conf->tx_delay_ms)
+ {
+ priv->tx_done_delayed = jiffies + priv->Conf->tx_delay_ms * HZ / 1000 + 1;
+ }
+ else
+ {
+ priv->waiting_command_mask &= ~ARLAN_COMMAND_TX;
+ TXHEAD(dev).offset = 0;
+ TXTAIL(dev).offset = 0;
+ priv->txLast = 0;
+ priv->bad = 0;
+ if (!priv->under_reset && !priv->under_config)
+ netif_wake_queue (dev);
+ }
+ return 1;
+}
+
+
+int arlan_command(struct net_device *dev, int command_p)
+{
+ struct arlan_private *priv = netdev_priv(dev);
+ volatile struct arlan_shmem __iomem *arlan = priv->card;
+ struct arlan_conf_stru *conf = priv->Conf;
+ int udelayed = 0;
+ int i = 0;
+ unsigned long flags;
+
+ ARLAN_DEBUG_ENTRY("arlan_command");
+
+ if (priv->card_polling_interval)
+ priv->card_polling_interval = 1;
+
+ if (arlan_debug & ARLAN_DEBUG_CHAIN_LOCKS)
+ printk(KERN_DEBUG "arlan_command, %lx commandByte %x waiting %lx incoming %x \n",
+ jiffies, READSHMB(arlan->commandByte),
+ priv->waiting_command_mask, command_p);
+
+ priv->waiting_command_mask |= command_p;
+
+ if (priv->waiting_command_mask & ARLAN_COMMAND_RESET)
+ if (time_after(jiffies, priv->lastReset + 5 * HZ))
+ priv->waiting_command_mask &= ~ARLAN_COMMAND_RESET;
+
+ if (priv->waiting_command_mask & ARLAN_COMMAND_INT_ACK)
+ {
+ arlan_interrupt_ack(dev);
+ priv->waiting_command_mask &= ~ARLAN_COMMAND_INT_ACK;
+ }
+ if (priv->waiting_command_mask & ARLAN_COMMAND_INT_ENABLE)
+ {
+ setInterruptEnable(dev);
+ priv->waiting_command_mask &= ~ARLAN_COMMAND_INT_ENABLE;
+ }
+
+ /* Card access serializing lock */
+ spin_lock_irqsave(&priv->lock, flags);
+
+ /* Check cards status and waiting */
+
+ if (priv->waiting_command_mask & (ARLAN_COMMAND_LONG_WAIT_NOW | ARLAN_COMMAND_WAIT_NOW))
+ {
+ while (priv->waiting_command_mask & (ARLAN_COMMAND_LONG_WAIT_NOW | ARLAN_COMMAND_WAIT_NOW))
+ {
+ if (READSHMB(arlan->resetFlag) ||
+ READSHMB(arlan->commandByte)) /* ||
+ (readControlRegister(dev) & ARLAN_ACCESS))
+ */
+ udelay(40);
+ else
+ priv->waiting_command_mask &= ~(ARLAN_COMMAND_LONG_WAIT_NOW | ARLAN_COMMAND_WAIT_NOW);
+
+ udelayed++;
+
+ if (priv->waiting_command_mask & ARLAN_COMMAND_LONG_WAIT_NOW)
+ {
+ if (udelayed * 40 > 1000000)
+ {
+ printk(KERN_ERR "%s long wait too long \n", dev->name);
+ priv->waiting_command_mask |= ARLAN_COMMAND_RESET;
+ break;
+ }
+ }
+ else if (priv->waiting_command_mask & ARLAN_COMMAND_WAIT_NOW)
+ {
+ if (udelayed * 40 > 1000)
+ {
+ printk(KERN_ERR "%s short wait too long \n", dev->name);
+ goto bad_end;
+ }
+ }
+ }
+ }
+ else
+ {
+ i = 0;
+ while ((READSHMB(arlan->resetFlag) ||
+ READSHMB(arlan->commandByte)) &&
+ conf->pre_Command_Wait > (i++) * 10)
+ udelay(10);
+
+
+ if ((READSHMB(arlan->resetFlag) ||
+ READSHMB(arlan->commandByte)) &&
+ !(priv->waiting_command_mask & ARLAN_COMMAND_RESET))
+ {
+ goto card_busy_end;
+ }
+ }
+ if (priv->waiting_command_mask & ARLAN_COMMAND_RESET)
+ priv->under_reset = 1;
+ if (priv->waiting_command_mask & ARLAN_COMMAND_CONF)
+ priv->under_config = 1;
+
+ /* Issuing command */
+ arlan_lock_card_access(dev);
+ if (priv->waiting_command_mask & ARLAN_COMMAND_POWERUP)
+ {
+ // if (readControlRegister(dev) & (ARLAN_ACCESS && ARLAN_POWER))
+ setPowerOn(dev);
+ arlan_interrupt_lancpu(dev);
+ priv->waiting_command_mask &= ~ARLAN_COMMAND_POWERUP;
+ priv->waiting_command_mask |= ARLAN_COMMAND_RESET;
+ priv->card_polling_interval = HZ / 10;
+ }
+ else if (priv->waiting_command_mask & ARLAN_COMMAND_ACTIVATE)
+ {
+ WRITESHMB(arlan->commandByte, ARLAN_COM_ACTIVATE);
+ arlan_interrupt_lancpu(dev);
+ priv->waiting_command_mask &= ~ARLAN_COMMAND_ACTIVATE;
+ priv->card_polling_interval = HZ / 10;
+ }
+ else if (priv->waiting_command_mask & ARLAN_COMMAND_RX_ABORT)
+ {
+ if (priv->rx_command_given)
+ {
+ WRITESHMB(arlan->commandByte, ARLAN_COM_RX_ABORT);
+ arlan_interrupt_lancpu(dev);
+ priv->rx_command_given = 0;
+ }
+ priv->waiting_command_mask &= ~ARLAN_COMMAND_RX_ABORT;
+ priv->card_polling_interval = 1;
+ }
+ else if (priv->waiting_command_mask & ARLAN_COMMAND_TX_ABORT)
+ {
+ if (priv->tx_command_given)
+ {
+ WRITESHMB(arlan->commandByte, ARLAN_COM_TX_ABORT);
+ arlan_interrupt_lancpu(dev);
+ priv->tx_command_given = 0;
+ }
+ priv->waiting_command_mask &= ~ARLAN_COMMAND_TX_ABORT;
+ priv->card_polling_interval = 1;
+ }
+ else if (priv->waiting_command_mask & ARLAN_COMMAND_RESET)
+ {
+ priv->under_reset=1;
+ netif_stop_queue (dev);
+
+ arlan_drop_tx(dev);
+ if (priv->tx_command_given || priv->rx_command_given)
+ {
+ printk(KERN_ERR "%s: Reset under tx or rx command \n", dev->name);
+ }
+ netif_stop_queue (dev);
+ if (arlan_debug & ARLAN_DEBUG_RESET)
+ printk(KERN_ERR "%s: Doing chip reset\n", dev->name);
+ priv->lastReset = jiffies;
+ WRITESHM(arlan->commandByte, 0, u_char);
+ /* hold card in reset state */
+ setHardwareReset(dev);
+ /* set reset flag and then release reset */
+ WRITESHM(arlan->resetFlag, 0xff, u_char);
+ clearChannelAttention(dev);
+ clearHardwareReset(dev);
+ priv->card_polling_interval = HZ / 4;
+ priv->waiting_command_mask &= ~ARLAN_COMMAND_RESET;
+ priv->waiting_command_mask |= ARLAN_COMMAND_INT_RACK;
+// priv->waiting_command_mask |= ARLAN_COMMAND_INT_RENABLE;
+// priv->waiting_command_mask |= ARLAN_COMMAND_RX;
+ }
+ else if (priv->waiting_command_mask & ARLAN_COMMAND_INT_RACK)
+ {
+ clearHardwareReset(dev);
+ clearClearInterrupt(dev);
+ setClearInterrupt(dev);
+ setInterruptEnable(dev);
+ priv->waiting_command_mask &= ~ARLAN_COMMAND_INT_RACK;
+ priv->waiting_command_mask |= ARLAN_COMMAND_CONF;
+ priv->under_config = 1;
+ priv->under_reset = 0;
+ }
+ else if (priv->waiting_command_mask & ARLAN_COMMAND_INT_RENABLE)
+ {
+ setInterruptEnable(dev);
+ priv->waiting_command_mask &= ~ARLAN_COMMAND_INT_RENABLE;
+ }
+ else if (priv->waiting_command_mask & ARLAN_COMMAND_CONF)
+ {
+ if (priv->tx_command_given || priv->rx_command_given)
+ {
+ printk(KERN_ERR "%s: Reset under tx or rx command \n", dev->name);
+ }
+ arlan_drop_tx(dev);
+ setInterruptEnable(dev);
+ arlan_hw_config(dev);
+ arlan_interrupt_lancpu(dev);
+ priv->waiting_command_mask &= ~ARLAN_COMMAND_CONF;
+ priv->card_polling_interval = HZ / 10;
+// priv->waiting_command_mask |= ARLAN_COMMAND_INT_RACK;
+// priv->waiting_command_mask |= ARLAN_COMMAND_INT_ENABLE;
+ priv->waiting_command_mask |= ARLAN_COMMAND_CONF_WAIT;
+ }
+ else if (priv->waiting_command_mask & ARLAN_COMMAND_CONF_WAIT)
+ {
+ if (READSHMB(arlan->configuredStatusFlag) != 0 &&
+ READSHMB(arlan->diagnosticInfo) == 0xff)
+ {
+ priv->waiting_command_mask &= ~ARLAN_COMMAND_CONF_WAIT;
+ priv->waiting_command_mask |= ARLAN_COMMAND_RX;
+ priv->waiting_command_mask |= ARLAN_COMMAND_TBUSY_CLEAR;
+ priv->card_polling_interval = HZ / 10;
+ priv->tx_command_given = 0;
+ priv->under_config = 0;
+ }
+ else
+ {
+ priv->card_polling_interval = 1;
+ if (arlan_debug & ARLAN_DEBUG_TIMING)
+ printk(KERN_ERR "configure delayed \n");
+ }
+ }
+ else if (priv->waiting_command_mask & ARLAN_COMMAND_RX)
+ {
+ if (!registrationBad(dev))
+ {
+ setInterruptEnable(dev);
+ memset_io(arlan->commandParameter, 0, 0xf);
+ WRITESHMB(arlan->commandByte, ARLAN_COM_INT | ARLAN_COM_RX_ENABLE);
+ WRITESHMB(arlan->commandParameter[0], conf->rxParameter);
+ arlan_interrupt_lancpu(dev);
+ priv->rx_command_given = 0; // mnjah, bad
+ priv->waiting_command_mask &= ~ARLAN_COMMAND_RX;
+ priv->card_polling_interval = 1;
+ }
+ else
+ priv->card_polling_interval = 2;
+ }
+ else if (priv->waiting_command_mask & ARLAN_COMMAND_TBUSY_CLEAR)
+ {
+ if ( !registrationBad(dev) &&
+ (netif_queue_stopped(dev) || !netif_running(dev)) )
+ {
+ priv->waiting_command_mask &= ~ARLAN_COMMAND_TBUSY_CLEAR;
+ netif_wake_queue (dev);
+ }
+ }
+ else if (priv->waiting_command_mask & ARLAN_COMMAND_TX)
+ {
+ if (!test_and_set_bit(0, (void *) &priv->tx_command_given))
+ {
+ if (time_after(jiffies,
+ priv->tx_last_sent + us2ticks(conf->rx_tweak1))
+ || time_before(jiffies,
+ priv->last_rx_int_ack_time + us2ticks(conf->rx_tweak2)))
+ {
+ setInterruptEnable(dev);
+ memset_io(arlan->commandParameter, 0, 0xf);
+ WRITESHMB(arlan->commandByte, ARLAN_COM_TX_ENABLE | ARLAN_COM_INT);
+ memcpy_toio(arlan->commandParameter, &TXLAST(dev), 14);
+// for ( i=1 ; i < 15 ; i++) printk("%02x:",READSHMB(arlan->commandParameter[i]));
+ priv->tx_last_sent = jiffies;
+ arlan_interrupt_lancpu(dev);
+ priv->tx_command_given = 1;
+ priv->waiting_command_mask &= ~ARLAN_COMMAND_TX;
+ priv->card_polling_interval = 1;
+ }
+ else
+ {
+ priv->tx_command_given = 0;
+ priv->card_polling_interval = 1;
+ }
+ }
+ else if (arlan_debug & ARLAN_DEBUG_CHAIN_LOCKS)
+ printk(KERN_ERR "tx command when tx chain locked \n");
+ }
+ else if (priv->waiting_command_mask & ARLAN_COMMAND_NOOPINT)
+ {
+ {
+ WRITESHMB(arlan->commandByte, ARLAN_COM_NOP | ARLAN_COM_INT);
+ }
+ arlan_interrupt_lancpu(dev);
+ priv->waiting_command_mask &= ~ARLAN_COMMAND_NOOPINT;
+ priv->card_polling_interval = HZ / 3;
+ }
+ else if (priv->waiting_command_mask & ARLAN_COMMAND_NOOP)
+ {
+ WRITESHMB(arlan->commandByte, ARLAN_COM_NOP);
+ arlan_interrupt_lancpu(dev);
+ priv->waiting_command_mask &= ~ARLAN_COMMAND_NOOP;
+ priv->card_polling_interval = HZ / 3;
+ }
+ else if (priv->waiting_command_mask & ARLAN_COMMAND_SLOW_POLL)
+ {
+ WRITESHMB(arlan->commandByte, ARLAN_COM_GOTO_SLOW_POLL);
+ arlan_interrupt_lancpu(dev);
+ priv->waiting_command_mask &= ~ARLAN_COMMAND_SLOW_POLL;
+ priv->card_polling_interval = HZ / 3;
+ }
+ else if (priv->waiting_command_mask & ARLAN_COMMAND_POWERDOWN)
+ {
+ setPowerOff(dev);
+ if (arlan_debug & ARLAN_DEBUG_CARD_STATE)
+ printk(KERN_WARNING "%s: Arlan Going Standby\n", dev->name);
+ priv->waiting_command_mask &= ~ARLAN_COMMAND_POWERDOWN;
+ priv->card_polling_interval = 3 * HZ;
+ }
+ arlan_unlock_card_access(dev);
+ for (i = 0; READSHMB(arlan->commandByte) && i < 20; i++)
+ udelay(10);
+ if (READSHMB(arlan->commandByte))
+ if (arlan_debug & ARLAN_DEBUG_CARD_STATE)
+ printk(KERN_ERR "card busy leaving command %lx\n", priv->waiting_command_mask);
+
+ spin_unlock_irqrestore(&priv->lock, flags);
+ ARLAN_DEBUG_EXIT("arlan_command");
+ priv->last_command_buff_free_time = jiffies;
+ return 0;
+
+card_busy_end:
+ if (time_after(jiffies, priv->last_command_buff_free_time + HZ))
+ priv->waiting_command_mask |= ARLAN_COMMAND_CLEAN_AND_RESET;
+
+ if (arlan_debug & ARLAN_DEBUG_CARD_STATE)
+ printk(KERN_ERR "%s arlan_command card busy end \n", dev->name);
+ spin_unlock_irqrestore(&priv->lock, flags);
+ ARLAN_DEBUG_EXIT("arlan_command");
+ return 1;
+
+bad_end:
+ printk(KERN_ERR "%s arlan_command bad end \n", dev->name);
+
+ spin_unlock_irqrestore(&priv->lock, flags);
+ ARLAN_DEBUG_EXIT("arlan_command");
+
+ return -1;
+}
+
+static inline void arlan_command_process(struct net_device *dev)
+{
+ struct arlan_private *priv = netdev_priv(dev);
+
+ int times = 0;
+ while (priv->waiting_command_mask && times < 8)
+ {
+ if (priv->waiting_command_mask)
+ {
+ if (arlan_command(dev, 0))
+ break;
+ times++;
+ }
+ /* if long command, we won't repeat trying */ ;
+ if (priv->card_polling_interval > 1)
+ break;
+ times++;
+ }
+}
+
+
+static inline void arlan_retransmit_now(struct net_device *dev)
+{
+ struct arlan_private *priv = netdev_priv(dev);
+
+
+ ARLAN_DEBUG_ENTRY("arlan_retransmit_now");
+ if (TXLAST(dev).offset == 0)
+ {
+ if (TXHEAD(dev).offset)
+ {
+ priv->txLast = 0;
+ IFDEBUG(ARLAN_DEBUG_TX_CHAIN) printk(KERN_DEBUG "TX buff switch to head \n");
+
+ }
+ else if (TXTAIL(dev).offset)
+ {
+ IFDEBUG(ARLAN_DEBUG_TX_CHAIN) printk(KERN_DEBUG "TX buff switch to tail \n");
+ priv->txLast = 1;
+ }
+ else
+ IFDEBUG(ARLAN_DEBUG_TX_CHAIN) printk(KERN_ERR "ReTransmit buff empty");
+ netif_wake_queue (dev);
+ return;
+
+ }
+ arlan_command(dev, ARLAN_COMMAND_TX);
+
+ priv->Conf->driverRetransmissions++;
+ priv->retransmissions++;
+
+ IFDEBUG(ARLAN_DEBUG_TX_CHAIN) printk("Retransmit %d bytes \n", TXLAST(dev).length);
+
+ ARLAN_DEBUG_EXIT("arlan_retransmit_now");
+}
+
+
+
+static void arlan_registration_timer(unsigned long data)
+{
+ struct net_device *dev = (struct net_device *) data;
+ struct arlan_private *priv = netdev_priv(dev);
+ int bh_mark_needed = 0;
+ int next_tick = 1;
+ long lostTime = ((long)jiffies - (long)priv->registrationLastSeen)
+ * (1000/HZ);
+
+ if (registrationBad(dev))
+ {
+ priv->registrationLostCount++;
+ if (lostTime > 7000 && lostTime < 7200)
+ {
+ printk(KERN_NOTICE "%s registration Lost \n", dev->name);
+ }
+ if (lostTime / priv->reRegisterExp > 2000)
+ arlan_command(dev, ARLAN_COMMAND_CLEAN_AND_CONF);
+ if (lostTime / (priv->reRegisterExp) > 3500)
+ arlan_command(dev, ARLAN_COMMAND_CLEAN_AND_RESET);
+ if (priv->reRegisterExp < 400)
+ priv->reRegisterExp += 2;
+ if (lostTime > 7200)
+ {
+ next_tick = HZ;
+ arlan_command(dev, ARLAN_COMMAND_CLEAN_AND_RESET);
+ }
+ }
+ else
+ {
+ if (priv->Conf->registrationMode && lostTime > 10000 &&
+ priv->registrationLostCount)
+ {
+ printk(KERN_NOTICE "%s registration is back after %ld milliseconds\n",
+ dev->name, lostTime);
+ }
+ priv->registrationLastSeen = jiffies;
+ priv->registrationLostCount = 0;
+ priv->reRegisterExp = 1;
+ if (!netif_running(dev) )
+ netif_wake_queue(dev);
+ if (time_after(priv->tx_last_sent,priv->tx_last_cleared) &&
+ time_after(jiffies, priv->tx_last_sent * 5*HZ) ){
+ arlan_command(dev, ARLAN_COMMAND_CLEAN_AND_RESET);
+ priv->tx_last_cleared = jiffies;
+ }
+ }
+
+
+ if (!registrationBad(dev) && priv->ReTransmitRequested)
+ {
+ IFDEBUG(ARLAN_DEBUG_TX_CHAIN)
+ printk(KERN_ERR "Retransmit from timer \n");
+ priv->ReTransmitRequested = 0;
+ arlan_retransmit_now(dev);
+ }
+ if (!registrationBad(dev) &&
+ time_after(jiffies, priv->tx_done_delayed) &&
+ priv->tx_done_delayed != 0)
+ {
+ TXLAST(dev).offset = 0;
+ if (priv->txLast)
+ priv->txLast = 0;
+ else if (TXTAIL(dev).offset)
+ priv->txLast = 1;
+ if (TXLAST(dev).offset)
+ {
+ arlan_retransmit_now(dev);
+ dev->trans_start = jiffies;
+ }
+ if (!(TXHEAD(dev).offset && TXTAIL(dev).offset))
+ {
+ netif_wake_queue (dev);
+ }
+ priv->tx_done_delayed = 0;
+ bh_mark_needed = 1;
+ }
+ if (bh_mark_needed)
+ {
+ netif_wake_queue (dev);
+ }
+ arlan_process_interrupt(dev);
+
+ if (next_tick < priv->card_polling_interval)
+ next_tick = priv->card_polling_interval;
+
+ priv->timer.expires = jiffies + next_tick;
+
+ add_timer(&priv->timer);
+}
+
+
+#ifdef ARLAN_DEBUGGING
+
+static void arlan_print_registers(struct net_device *dev, int line)
+{
+ struct arlan_private *priv = netdev_priv(dev);
+ volatile struct arlan_shmem *arlan = priv->card;
+
+ u_char hostcpuLock, lancpuLock, controlRegister, cntrlRegImage,
+ txStatus, rxStatus, interruptInProgress, commandByte;
+
+
+ ARLAN_DEBUG_ENTRY("arlan_print_registers");
+ READSHM(interruptInProgress, arlan->interruptInProgress, u_char);
+ READSHM(hostcpuLock, arlan->hostcpuLock, u_char);
+ READSHM(lancpuLock, arlan->lancpuLock, u_char);
+ READSHM(controlRegister, arlan->controlRegister, u_char);
+ READSHM(cntrlRegImage, arlan->cntrlRegImage, u_char);
+ READSHM(txStatus, arlan->txStatus, u_char);
+ READSHM(rxStatus, arlan->rxStatus, u_char);
+ READSHM(commandByte, arlan->commandByte, u_char);
+
+ printk(KERN_WARNING "line %04d IP %02x HL %02x LL %02x CB %02x CR %02x CRI %02x TX %02x RX %02x\n",
+ line, interruptInProgress, hostcpuLock, lancpuLock, commandByte,
+ controlRegister, cntrlRegImage, txStatus, rxStatus);
+
+ ARLAN_DEBUG_EXIT("arlan_print_registers");
+}
+#endif
+
+
+static int arlan_hw_tx(struct net_device *dev, char *buf, int length)
+{
+ int i;
+
+ struct arlan_private *priv = netdev_priv(dev);
+ volatile struct arlan_shmem __iomem *arlan = priv->card;
+ struct arlan_conf_stru *conf = priv->Conf;
+
+ int tailStarts = 0x800;
+ int headEnds = 0x0;
+
+
+ ARLAN_DEBUG_ENTRY("arlan_hw_tx");
+ if (TXHEAD(dev).offset)
+ headEnds = (((TXHEAD(dev).offset + TXHEAD(dev).length - offsetof(struct arlan_shmem, txBuffer)) / 64) + 1) * 64;
+ if (TXTAIL(dev).offset)
+ tailStarts = 0x800 - (((TXTAIL(dev).offset - offsetof(struct arlan_shmem, txBuffer)) / 64) + 2) * 64;
+
+
+ if (!TXHEAD(dev).offset && length < tailStarts)
+ {
+ IFDEBUG(ARLAN_DEBUG_TX_CHAIN)
+ printk(KERN_ERR "TXHEAD insert, tailStart %d\n", tailStarts);
+
+ TXHEAD(dev).offset =
+ offsetof(struct arlan_shmem, txBuffer);
+ TXHEAD(dev).length = length - ARLAN_FAKE_HDR_LEN;
+ for (i = 0; i < 6; i++)
+ TXHEAD(dev).dest[i] = buf[i];
+ TXHEAD(dev).clear = conf->txClear;
+ TXHEAD(dev).retries = conf->txRetries; /* 0 is use default */
+ TXHEAD(dev).routing = conf->txRouting;
+ TXHEAD(dev).scrambled = conf->txScrambled;
+ memcpy_toio((char __iomem *)arlan + TXHEAD(dev).offset, buf + ARLAN_FAKE_HDR_LEN, TXHEAD(dev).length);
+ }
+ else if (!TXTAIL(dev).offset && length < (0x800 - headEnds))
+ {
+ IFDEBUG(ARLAN_DEBUG_TX_CHAIN)
+ printk(KERN_ERR "TXTAIL insert, headEnd %d\n", headEnds);
+
+ TXTAIL(dev).offset =
+ offsetof(struct arlan_shmem, txBuffer) + 0x800 - (length / 64 + 2) * 64;
+ TXTAIL(dev).length = length - ARLAN_FAKE_HDR_LEN;
+ for (i = 0; i < 6; i++)
+ TXTAIL(dev).dest[i] = buf[i];
+ TXTAIL(dev).clear = conf->txClear;
+ TXTAIL(dev).retries = conf->txRetries;
+ TXTAIL(dev).routing = conf->txRouting;
+ TXTAIL(dev).scrambled = conf->txScrambled;
+ memcpy_toio(((char __iomem *)arlan + TXTAIL(dev).offset), buf + ARLAN_FAKE_HDR_LEN, TXTAIL(dev).length);
+ }
+ else
+ {
+ netif_stop_queue (dev);
+ IFDEBUG(ARLAN_DEBUG_TX_CHAIN)
+ printk(KERN_ERR "TX TAIL & HEAD full, return, tailStart %d headEnd %d\n", tailStarts, headEnds);
+ return -1;
+ }
+ priv->out_bytes += length;
+ priv->out_bytes10 += length;
+ if (conf->measure_rate < 1)
+ conf->measure_rate = 1;
+ if (time_after(jiffies, priv->out_time + conf->measure_rate * HZ))
+ {
+ conf->out_speed = priv->out_bytes / conf->measure_rate;
+ priv->out_bytes = 0;
+ priv->out_time = jiffies;
+ }
+ if (time_after(jiffies, priv->out_time10 + conf->measure_rate * 10*HZ))
+ {
+ conf->out_speed10 = priv->out_bytes10 / (10 * conf->measure_rate);
+ priv->out_bytes10 = 0;
+ priv->out_time10 = jiffies;
+ }
+ if (TXHEAD(dev).offset && TXTAIL(dev).offset)
+ {
+ netif_stop_queue (dev);
+ return 0;
+ }
+ else
+ netif_start_queue (dev);
+
+
+ IFDEBUG(ARLAN_DEBUG_HEADER_DUMP)
+ printk(KERN_WARNING "%s Transmit t %2x:%2x:%2x:%2x:%2x:%2x f %2x:%2x:%2x:%2x:%2x:%2x \n", dev->name,
+ (unsigned char) buf[0], (unsigned char) buf[1], (unsigned char) buf[2], (unsigned char) buf[3],
+ (unsigned char) buf[4], (unsigned char) buf[5], (unsigned char) buf[6], (unsigned char) buf[7],
+ (unsigned char) buf[8], (unsigned char) buf[9], (unsigned char) buf[10], (unsigned char) buf[11]);
+
+ IFDEBUG(ARLAN_DEBUG_TX_CHAIN) printk(KERN_ERR "TX command prepare for buffer %d\n", priv->txLast);
+
+ arlan_command(dev, ARLAN_COMMAND_TX);
+
+ priv->tx_last_sent = jiffies;
+
+ IFDEBUG(ARLAN_DEBUG_TX_CHAIN) printk("%s TX Qued %d bytes \n", dev->name, length);
+
+ ARLAN_DEBUG_EXIT("arlan_hw_tx");
+
+ return 0;
+}
+
+
+static int arlan_hw_config(struct net_device *dev)
+{
+ struct arlan_private *priv = netdev_priv(dev);
+ volatile struct arlan_shmem __iomem *arlan = priv->card;
+ struct arlan_conf_stru *conf = priv->Conf;
+
+ ARLAN_DEBUG_ENTRY("arlan_hw_config");
+
+ printk(KERN_NOTICE "%s arlan configure called \n", dev->name);
+ if (arlan_EEPROM_bad)
+ printk(KERN_NOTICE "arlan configure with eeprom bad option \n");
+
+
+ WRITESHM(arlan->spreadingCode, conf->spreadingCode, u_char);
+ WRITESHM(arlan->channelSet, conf->channelSet, u_char);
+
+ if (arlan_EEPROM_bad)
+ WRITESHM(arlan->defaultChannelSet, conf->channelSet, u_char);
+
+ WRITESHM(arlan->channelNumber, conf->channelNumber, u_char);
+
+ WRITESHM(arlan->scramblingDisable, conf->scramblingDisable, u_char);
+ WRITESHM(arlan->txAttenuation, conf->txAttenuation, u_char);
+
+ WRITESHM(arlan->systemId, conf->systemId, u_int);
+
+ WRITESHM(arlan->maxRetries, conf->maxRetries, u_char);
+ WRITESHM(arlan->receiveMode, conf->receiveMode, u_char);
+ WRITESHM(arlan->priority, conf->priority, u_char);
+ WRITESHM(arlan->rootOrRepeater, conf->rootOrRepeater, u_char);
+ WRITESHM(arlan->SID, conf->SID, u_int);
+
+ WRITESHM(arlan->registrationMode, conf->registrationMode, u_char);
+
+ WRITESHM(arlan->registrationFill, conf->registrationFill, u_char);
+ WRITESHM(arlan->localTalkAddress, conf->localTalkAddress, u_char);
+ WRITESHM(arlan->codeFormat, conf->codeFormat, u_char);
+ WRITESHM(arlan->numChannels, conf->numChannels, u_char);
+ WRITESHM(arlan->channel1, conf->channel1, u_char);
+ WRITESHM(arlan->channel2, conf->channel2, u_char);
+ WRITESHM(arlan->channel3, conf->channel3, u_char);
+ WRITESHM(arlan->channel4, conf->channel4, u_char);
+ WRITESHM(arlan->radioNodeId, conf->radioNodeId, u_short);
+ WRITESHM(arlan->SID, conf->SID, u_int);
+ WRITESHM(arlan->waitTime, conf->waitTime, u_short);
+ WRITESHM(arlan->lParameter, conf->lParameter, u_short);
+ memcpy_toio(&(arlan->_15), &(conf->_15), 3);
+ WRITESHM(arlan->_15, conf->_15, u_short);
+ WRITESHM(arlan->headerSize, conf->headerSize, u_short);
+ if (arlan_EEPROM_bad)
+ WRITESHM(arlan->hardwareType, conf->hardwareType, u_char);
+ WRITESHM(arlan->radioType, conf->radioType, u_char);
+ if (arlan_EEPROM_bad)
+ WRITESHM(arlan->radioModule, conf->radioType, u_char);
+
+ memcpy_toio(arlan->encryptionKey + keyStart, encryptionKey, 8);
+ memcpy_toio(arlan->name, conf->siteName, 16);
+
+ WRITESHMB(arlan->commandByte, ARLAN_COM_INT | ARLAN_COM_CONF); /* do configure */
+ memset_io(arlan->commandParameter, 0, 0xf); /* 0xf */
+ memset_io(arlan->commandParameter + 1, 0, 2);
+ if (conf->writeEEPROM)
+ {
+ memset_io(arlan->commandParameter, conf->writeEEPROM, 1);
+// conf->writeEEPROM=0;
+ }
+ if (conf->registrationMode && conf->registrationInterrupts)
+ memset_io(arlan->commandParameter + 3, 1, 1);
+ else
+ memset_io(arlan->commandParameter + 3, 0, 1);
+
+ priv->irq_test_done = 0;
+
+ if (conf->tx_queue_len)
+ dev->tx_queue_len = conf->tx_queue_len;
+ udelay(100);
+
+ ARLAN_DEBUG_EXIT("arlan_hw_config");
+ return 0;
+}
+
+
+static int arlan_read_card_configuration(struct net_device *dev)
+{
+ u_char tlx415;
+ struct arlan_private *priv = netdev_priv(dev);
+ volatile struct arlan_shmem __iomem *arlan = priv->card;
+ struct arlan_conf_stru *conf = priv->Conf;
+
+ ARLAN_DEBUG_ENTRY("arlan_read_card_configuration");
+
+ if (radioNodeId == radioNodeIdUNKNOWN)
+ {
+ READSHM(conf->radioNodeId, arlan->radioNodeId, u_short);
+ }
+ else
+ conf->radioNodeId = radioNodeId;
+
+ if (SID == SIDUNKNOWN)
+ {
+ READSHM(conf->SID, arlan->SID, u_int);
+ }
+ else conf->SID = SID;
+
+ if (spreadingCode == spreadingCodeUNKNOWN)
+ {
+ READSHM(conf->spreadingCode, arlan->spreadingCode, u_char);
+ }
+ else
+ conf->spreadingCode = spreadingCode;
+
+ if (channelSet == channelSetUNKNOWN)
+ {
+ READSHM(conf->channelSet, arlan->channelSet, u_char);
+ }
+ else conf->channelSet = channelSet;
+
+ if (channelNumber == channelNumberUNKNOWN)
+ {
+ READSHM(conf->channelNumber, arlan->channelNumber, u_char);
+ }
+ else conf->channelNumber = channelNumber;
+
+ READSHM(conf->scramblingDisable, arlan->scramblingDisable, u_char);
+ READSHM(conf->txAttenuation, arlan->txAttenuation, u_char);
+
+ if (systemId == systemIdUNKNOWN)
+ {
+ READSHM(conf->systemId, arlan->systemId, u_int);
+ }
+ else conf->systemId = systemId;
+
+ READSHM(conf->maxDatagramSize, arlan->maxDatagramSize, u_short);
+ READSHM(conf->maxFrameSize, arlan->maxFrameSize, u_short);
+ READSHM(conf->maxRetries, arlan->maxRetries, u_char);
+ READSHM(conf->receiveMode, arlan->receiveMode, u_char);
+ READSHM(conf->priority, arlan->priority, u_char);
+ READSHM(conf->rootOrRepeater, arlan->rootOrRepeater, u_char);
+
+ if (SID == SIDUNKNOWN)
+ {
+ READSHM(conf->SID, arlan->SID, u_int);
+ }
+ else conf->SID = SID;
+
+ if (registrationMode == registrationModeUNKNOWN)
+ {
+ READSHM(conf->registrationMode, arlan->registrationMode, u_char);
+ }
+ else conf->registrationMode = registrationMode;
+
+ READSHM(conf->registrationFill, arlan->registrationFill, u_char);
+ READSHM(conf->localTalkAddress, arlan->localTalkAddress, u_char);
+ READSHM(conf->codeFormat, arlan->codeFormat, u_char);
+ READSHM(conf->numChannels, arlan->numChannels, u_char);
+ READSHM(conf->channel1, arlan->channel1, u_char);
+ READSHM(conf->channel2, arlan->channel2, u_char);
+ READSHM(conf->channel3, arlan->channel3, u_char);
+ READSHM(conf->channel4, arlan->channel4, u_char);
+ READSHM(conf->waitTime, arlan->waitTime, u_short);
+ READSHM(conf->lParameter, arlan->lParameter, u_short);
+ READSHM(conf->_15, arlan->_15, u_short);
+ READSHM(conf->headerSize, arlan->headerSize, u_short);
+ READSHM(conf->hardwareType, arlan->hardwareType, u_char);
+ READSHM(conf->radioType, arlan->radioModule, u_char);
+
+ if (conf->radioType == 0)
+ conf->radioType = 0xc;
+
+ WRITESHM(arlan->configStatus, 0xA5, u_char);
+ READSHM(tlx415, arlan->configStatus, u_char);
+
+ if (tlx415 != 0xA5)
+ printk(KERN_INFO "%s tlx415 chip \n", dev->name);
+
+ conf->txClear = 0;
+ conf->txRetries = 1;
+ conf->txRouting = 1;
+ conf->txScrambled = 0;
+ conf->rxParameter = 1;
+ conf->txTimeoutMs = 4000;
+ conf->waitCardTimeout = 100000;
+ conf->receiveMode = ARLAN_RCV_CLEAN;
+ memcpy_fromio(conf->siteName, arlan->name, 16);
+ conf->siteName[16] = '\0';
+ conf->retries = retries;
+ conf->tx_delay_ms = tx_delay_ms;
+ conf->ReTransmitPacketMaxSize = 200;
+ conf->waitReTransmitPacketMaxSize = 200;
+ conf->txAckTimeoutMs = 900;
+ conf->fastReTransCount = 3;
+
+ ARLAN_DEBUG_EXIT("arlan_read_card_configuration");
+
+ return 0;
+}
+
+
+static int lastFoundAt = 0xbe000;
+
+
+/*
+ * This is the real probe routine. Linux has a history of friendly device
+ * probes on the ISA bus. A good device probes avoids doing writes, and
+ * verifies that the correct device exists and functions.
+ */
+#define ARLAN_SHMEM_SIZE 0x2000
+static int __init arlan_check_fingerprint(unsigned long memaddr)
+{
+ static const char probeText[] = "TELESYSTEM SLW INC. ARLAN \0";
+ volatile struct arlan_shmem __iomem *arlan = (struct arlan_shmem *) memaddr;
+ unsigned long paddr = virt_to_phys((void *) memaddr);
+ char tempBuf[49];
+
+ ARLAN_DEBUG_ENTRY("arlan_check_fingerprint");
+
+ if (!request_mem_region(paddr, ARLAN_SHMEM_SIZE, "arlan")) {
+ // printk(KERN_WARNING "arlan: memory region %lx excluded from probing \n",paddr);
+ return -ENODEV;
+ }
+
+ memcpy_fromio(tempBuf, arlan->textRegion, 29);
+ tempBuf[30] = 0;
+
+ /* check for card at this address */
+ if (0 != strncmp(tempBuf, probeText, 29)){
+ release_mem_region(paddr, ARLAN_SHMEM_SIZE);
+ return -ENODEV;
+ }
+
+// printk(KERN_INFO "arlan found at 0x%x \n",memaddr);
+ ARLAN_DEBUG_EXIT("arlan_check_fingerprint");
+
+ return 0;
+}
+
+static int arlan_change_mtu(struct net_device *dev, int new_mtu)
+{
+ struct arlan_private *priv = netdev_priv(dev);
+ struct arlan_conf_stru *conf = priv->Conf;
+
+ ARLAN_DEBUG_ENTRY("arlan_change_mtu");
+ if (new_mtu > 2032)
+ return -EINVAL;
+ dev->mtu = new_mtu;
+ if (new_mtu < 256)
+ new_mtu = 256; /* cards book suggests 1600 */
+ conf->maxDatagramSize = new_mtu;
+ conf->maxFrameSize = new_mtu + 48;
+
+ arlan_command(dev, ARLAN_COMMAND_CLEAN_AND_CONF);
+ printk(KERN_NOTICE "%s mtu changed to %d \n", dev->name, new_mtu);
+
+ ARLAN_DEBUG_EXIT("arlan_change_mtu");
+
+ return 0;
+}
+
+static int arlan_mac_addr(struct net_device *dev, void *p)
+{
+ struct sockaddr *addr = p;
+
+
+ ARLAN_DEBUG_ENTRY("arlan_mac_addr");
+ return -EINVAL;
+
+ if (!netif_running(dev))
+ return -EBUSY;
+ memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
+
+ ARLAN_DEBUG_EXIT("arlan_mac_addr");
+ return 0;
+}
+
+
+
+static int __init arlan_setup_device(struct net_device *dev, int num)
+{
+ struct arlan_private *ap = netdev_priv(dev);
+ int err;
+
+ ARLAN_DEBUG_ENTRY("arlan_setup_device");
+
+ ap->conf = (struct arlan_shmem *)(ap+1);
+
+ dev->tx_queue_len = tx_queue_len;
+ dev->open = arlan_open;
+ dev->stop = arlan_close;
+ dev->hard_start_xmit = arlan_tx;
+ dev->get_stats = arlan_statistics;
+ dev->set_multicast_list = arlan_set_multicast;
+ dev->change_mtu = arlan_change_mtu;
+ dev->set_mac_address = arlan_mac_addr;
+ dev->tx_timeout = arlan_tx_timeout;
+ dev->watchdog_timeo = 3*HZ;
+
+ ap->irq_test_done = 0;
+ ap->Conf = &arlan_conf[num];
+
+ ap->Conf->pre_Command_Wait = 40;
+ ap->Conf->rx_tweak1 = 30;
+ ap->Conf->rx_tweak2 = 0;
+
+
+ err = register_netdev(dev);
+ if (err) {
+ release_mem_region(virt_to_phys((void *) dev->mem_start),
+ ARLAN_SHMEM_SIZE);
+ free_netdev(dev);
+ return err;
+ }
+ arlan_device[num] = dev;
+ ARLAN_DEBUG_EXIT("arlan_setup_device");
+ return 0;
+}
+
+static int __init arlan_probe_here(struct net_device *dev,
+ unsigned long memaddr)
+{
+ struct arlan_private *ap = netdev_priv(dev);
+
+ ARLAN_DEBUG_ENTRY("arlan_probe_here");
+
+ if (arlan_check_fingerprint(memaddr))
+ return -ENODEV;
+
+ printk(KERN_NOTICE "%s: Arlan found at %x, \n ", dev->name,
+ (int) virt_to_phys((void*)memaddr));
+
+ ap->card = (void *) memaddr;
+ dev->mem_start = memaddr;
+ dev->mem_end = memaddr + ARLAN_SHMEM_SIZE-1;
+
+ if (dev->irq < 2)
+ {
+ READSHM(dev->irq, ap->card->irqLevel, u_char);
+ } else if (dev->irq == 2)
+ dev->irq = 9;
+
+ arlan_read_card_configuration(dev);
+
+ ARLAN_DEBUG_EXIT("arlan_probe_here");
+ return 0;
+}
+
+
+static int arlan_open(struct net_device *dev)
+{
+ struct arlan_private *priv = netdev_priv(dev);
+ volatile struct arlan_shmem __iomem *arlan = priv->card;
+ int ret = 0;
+
+ ARLAN_DEBUG_ENTRY("arlan_open");
+
+ ret = request_irq(dev->irq, &arlan_interrupt, 0, dev->name, dev);
+ if (ret)
+ {
+ printk(KERN_ERR "%s: unable to get IRQ %d .\n",
+ dev->name, dev->irq);
+ return ret;
+ }
+
+
+ priv->bad = 0;
+ priv->lastReset = 0;
+ priv->reset = 0;
+ memcpy_fromio(dev->dev_addr, arlan->lanCardNodeId, 6);
+ memset(dev->broadcast, 0xff, 6);
+ dev->tx_queue_len = tx_queue_len;
+ priv->interrupt_processing_active = 0;
+ spin_lock_init(&priv->lock);
+
+ netif_start_queue (dev);
+
+ priv->registrationLostCount = 0;
+ priv->registrationLastSeen = jiffies;
+ priv->txLast = 0;
+ priv->tx_command_given = 0;
+ priv->rx_command_given = 0;
+
+ priv->reRegisterExp = 1;
+ priv->tx_last_sent = jiffies - 1;
+ priv->tx_last_cleared = jiffies;
+ priv->Conf->writeEEPROM = 0;
+ priv->Conf->registrationInterrupts = 1;
+
+ init_timer(&priv->timer);
+ priv->timer.expires = jiffies + HZ / 10;
+ priv->timer.data = (unsigned long) dev;
+ priv->timer.function = &arlan_registration_timer; /* timer handler */
+
+ arlan_command(dev, ARLAN_COMMAND_POWERUP | ARLAN_COMMAND_LONG_WAIT_NOW);
+ mdelay(200);
+ add_timer(&priv->timer);
+
+ ARLAN_DEBUG_EXIT("arlan_open");
+ return 0;
+}
+
+
+static void arlan_tx_timeout (struct net_device *dev)
+{
+ printk(KERN_ERR "%s: arlan transmit timed out, kernel decided\n", dev->name);
+ /* Try to restart the adaptor. */
+ arlan_command(dev, ARLAN_COMMAND_CLEAN_AND_RESET);
+ // dev->trans_start = jiffies;
+ // netif_start_queue (dev);
+}
+
+
+static int arlan_tx(struct sk_buff *skb, struct net_device *dev)
+{
+ short length;
+ unsigned char *buf;
+
+ ARLAN_DEBUG_ENTRY("arlan_tx");
+
+ length = ETH_ZLEN < skb->len ? skb->len : ETH_ZLEN;
+ buf = skb->data;
+
+ if (length + 0x12 > 0x800) {
+ printk(KERN_ERR "TX RING overflow \n");
+ netif_stop_queue (dev);
+ }
+
+ if (arlan_hw_tx(dev, buf, length) == -1)
+ goto bad_end;
+
+ dev->trans_start = jiffies;
+
+ dev_kfree_skb(skb);
+
+ arlan_process_interrupt(dev);
+ ARLAN_DEBUG_EXIT("arlan_tx");
+ return 0;
+
+bad_end:
+ arlan_process_interrupt(dev);
+ netif_stop_queue (dev);
+ ARLAN_DEBUG_EXIT("arlan_tx");
+ return 1;
+}
+
+
+static inline int DoNotReTransmitCrap(struct net_device *dev)
+{
+ struct arlan_private *priv = netdev_priv(dev);
+
+ if (TXLAST(dev).length < priv->Conf->ReTransmitPacketMaxSize)
+ return 1;
+ return 0;
+
+}
+
+static inline int DoNotWaitReTransmitCrap(struct net_device *dev)
+{
+ struct arlan_private *priv = netdev_priv(dev);
+
+ if (TXLAST(dev).length < priv->Conf->waitReTransmitPacketMaxSize)
+ return 1;
+ return 0;
+}
+
+static inline void arlan_queue_retransmit(struct net_device *dev)
+{
+ struct arlan_private *priv = netdev_priv(dev);
+
+ ARLAN_DEBUG_ENTRY("arlan_queue_retransmit");
+
+ if (DoNotWaitReTransmitCrap(dev))
+ {
+ arlan_drop_tx(dev);
+ } else
+ priv->ReTransmitRequested++;
+
+ ARLAN_DEBUG_EXIT("arlan_queue_retransmit");
+}
+
+static inline void RetryOrFail(struct net_device *dev)
+{
+ struct arlan_private *priv = netdev_priv(dev);
+
+ ARLAN_DEBUG_ENTRY("RetryOrFail");
+
+ if (priv->retransmissions > priv->Conf->retries ||
+ DoNotReTransmitCrap(dev))
+ {
+ arlan_drop_tx(dev);
+ }
+ else if (priv->bad <= priv->Conf->fastReTransCount)
+ {
+ arlan_retransmit_now(dev);
+ }
+ else arlan_queue_retransmit(dev);
+
+ ARLAN_DEBUG_EXIT("RetryOrFail");
+}
+
+
+static void arlan_tx_done_interrupt(struct net_device *dev, int status)
+{
+ struct arlan_private *priv = netdev_priv(dev);
+
+ ARLAN_DEBUG_ENTRY("arlan_tx_done_interrupt");
+
+ priv->tx_last_cleared = jiffies;
+ priv->tx_command_given = 0;
+ switch (status)
+ {
+ case 1:
+ {
+ IFDEBUG(ARLAN_DEBUG_TX_CHAIN)
+ printk("arlan intr: transmit OK\n");
+ priv->stats.tx_packets++;
+ priv->bad = 0;
+ priv->reset = 0;
+ priv->retransmissions = 0;
+ if (priv->Conf->tx_delay_ms)
+ {
+ priv->tx_done_delayed = jiffies + (priv->Conf->tx_delay_ms * HZ) / 1000 + 1;
+ }
+ else
+ {
+ TXLAST(dev).offset = 0;
+ if (priv->txLast)
+ priv->txLast = 0;
+ else if (TXTAIL(dev).offset)
+ priv->txLast = 1;
+ if (TXLAST(dev).offset)
+ {
+ arlan_retransmit_now(dev);
+ dev->trans_start = jiffies;
+ }
+ if (!TXHEAD(dev).offset || !TXTAIL(dev).offset)
+ {
+ netif_wake_queue (dev);
+ }
+ }
+ }
+ break;
+
+ case 2:
+ {
+ IFDEBUG(ARLAN_DEBUG_TX_CHAIN)
+ printk("arlan intr: transmit timed out\n");
+ priv->bad += 1;
+ //arlan_queue_retransmit(dev);
+ RetryOrFail(dev);
+ }
+ break;
+
+ case 3:
+ {
+ IFDEBUG(ARLAN_DEBUG_TX_CHAIN)
+ printk("arlan intr: transmit max retries\n");
+ priv->bad += 1;
+ priv->reset = 0;
+ //arlan_queue_retransmit(dev);
+ RetryOrFail(dev);
+ }
+ break;
+
+ case 4:
+ {
+ IFDEBUG(ARLAN_DEBUG_TX_CHAIN)
+ printk("arlan intr: transmit aborted\n");
+ priv->bad += 1;
+ arlan_queue_retransmit(dev);
+ //RetryOrFail(dev);
+ }
+ break;
+
+ case 5:
+ {
+ IFDEBUG(ARLAN_DEBUG_TX_CHAIN)
+ printk("arlan intr: transmit not registered\n");
+ priv->bad += 1;
+ //debug=101;
+ arlan_queue_retransmit(dev);
+ }
+ break;
+
+ case 6:
+ {
+ IFDEBUG(ARLAN_DEBUG_TX_CHAIN)
+ printk("arlan intr: transmit destination full\n");
+ priv->bad += 1;
+ priv->reset = 0;
+ //arlan_drop_tx(dev);
+ arlan_queue_retransmit(dev);
+ }
+ break;
+
+ case 7:
+ {
+ IFDEBUG(ARLAN_DEBUG_TX_CHAIN)
+ printk("arlan intr: transmit unknown ack\n");
+ priv->bad += 1;
+ priv->reset = 0;
+ arlan_queue_retransmit(dev);
+ }
+ break;
+
+ case 8:
+ {
+ IFDEBUG(ARLAN_DEBUG_TX_CHAIN)
+ printk("arlan intr: transmit dest mail box full\n");
+ priv->bad += 1;
+ priv->reset = 0;
+ //arlan_drop_tx(dev);
+ arlan_queue_retransmit(dev);
+ }
+ break;
+
+ case 9:
+ {
+ IFDEBUG(ARLAN_DEBUG_TX_CHAIN)
+ printk("arlan intr: transmit root dest not reg.\n");
+ priv->bad += 1;
+ priv->reset = 1;
+ //arlan_drop_tx(dev);
+ arlan_queue_retransmit(dev);
+ }
+ break;
+
+ default:
+ {
+ printk(KERN_ERR "arlan intr: transmit status unknown\n");
+ priv->bad += 1;
+ priv->reset = 1;
+ arlan_drop_tx(dev);
+ }
+ }
+
+ ARLAN_DEBUG_EXIT("arlan_tx_done_interrupt");
+}
+
+
+static void arlan_rx_interrupt(struct net_device *dev, u_char rxStatus, u_short rxOffset, u_short pkt_len)
+{
+ char *skbtmp;
+ int i = 0;
+
+ struct arlan_private *priv = netdev_priv(dev);
+ volatile struct arlan_shmem __iomem *arlan = priv->card;
+ struct arlan_conf_stru *conf = priv->Conf;
+
+
+ ARLAN_DEBUG_ENTRY("arlan_rx_interrupt");
+ // by spec, not WRITESHMB(arlan->rxStatus,0x00);
+ // prohibited here arlan_command(dev, ARLAN_COMMAND_RX);
+
+ if (pkt_len < 10 || pkt_len > 2048)
+ {
+ printk(KERN_WARNING "%s: got too short or long packet, len %d \n", dev->name, pkt_len);
+ return;
+ }
+ if (rxOffset + pkt_len > 0x2000)
+ {
+ printk("%s: got too long packet, len %d offset %x\n", dev->name, pkt_len, rxOffset);
+ return;
+ }
+ priv->in_bytes += pkt_len;
+ priv->in_bytes10 += pkt_len;
+ if (conf->measure_rate < 1)
+ conf->measure_rate = 1;
+ if (time_after(jiffies, priv->in_time + conf->measure_rate * HZ))
+ {
+ conf->in_speed = priv->in_bytes / conf->measure_rate;
+ priv->in_bytes = 0;
+ priv->in_time = jiffies;
+ }
+ if (time_after(jiffies, priv->in_time10 + conf->measure_rate * 10*HZ))
+ {
+ conf->in_speed10 = priv->in_bytes10 / (10 * conf->measure_rate);
+ priv->in_bytes10 = 0;
+ priv->in_time10 = jiffies;
+ }
+ DEBUGSHM(1, "arlan rcv pkt rxStatus= %d ", arlan->rxStatus, u_char);
+ switch (rxStatus)
+ {
+ case 1:
+ case 2:
+ case 3:
+ {
+ /* Malloc up new buffer. */
+ struct sk_buff *skb;
+
+ DEBUGSHM(50, "arlan recv pkt offs=%d\n", arlan->rxOffset, u_short);
+ DEBUGSHM(1, "arlan rxFrmType = %d \n", arlan->rxFrmType, u_char);
+ DEBUGSHM(1, KERN_INFO "arlan rx scrambled = %d \n", arlan->scrambled, u_char);
+
+ /* here we do multicast filtering to avoid slow 8-bit memcopy */
+#ifdef ARLAN_MULTICAST
+ if (!(dev->flags & IFF_ALLMULTI) &&
+ !(dev->flags & IFF_PROMISC) &&
+ dev->mc_list)
+ {
+ char hw_dst_addr[6];
+ struct dev_mc_list *dmi = dev->mc_list;
+ int i;
+
+ memcpy_fromio(hw_dst_addr, arlan->ultimateDestAddress, 6);
+ if (hw_dst_addr[0] == 0x01)
+ {
+ if (mdebug)
+ if (hw_dst_addr[1] == 0x00)
+ printk(KERN_ERR "%s mcast 0x0100 \n", dev->name);
+ else if (hw_dst_addr[1] == 0x40)
+ printk(KERN_ERR "%s m/bcast 0x0140 \n", dev->name);
+ while (dmi)
+ { if (dmi->dmi_addrlen == 6)
+ {
+ if (arlan_debug & ARLAN_DEBUG_HEADER_DUMP)
+ printk(KERN_ERR "%s mcl %2x:%2x:%2x:%2x:%2x:%2x \n", dev->name,
+ dmi->dmi_addr[0], dmi->dmi_addr[1], dmi->dmi_addr[2],
+ dmi->dmi_addr[3], dmi->dmi_addr[4], dmi->dmi_addr[5]);
+ for (i = 0; i < 6; i++)
+ if (dmi->dmi_addr[i] != hw_dst_addr[i])
+ break;
+ if (i == 6)
+ break;
+ }
+ else
+ printk(KERN_ERR "%s: invalid multicast address length given.\n", dev->name);
+ dmi = dmi->next;
+ }
+ /* we reach here if multicast filtering is on and packet
+ * is multicast and not for receive */
+ goto end_of_interrupt;
+ }
+ }
+#endif // ARLAN_MULTICAST
+ /* multicast filtering ends here */
+ pkt_len += ARLAN_FAKE_HDR_LEN;
+
+ skb = dev_alloc_skb(pkt_len + 4);
+ if (skb == NULL)
+ {
+ printk(KERN_ERR "%s: Memory squeeze, dropping packet.\n", dev->name);
+ priv->stats.rx_dropped++;
+ break;
+ }
+ skb_reserve(skb, 2);
+ skb->dev = dev;
+ skbtmp = skb_put(skb, pkt_len);
+
+ memcpy_fromio(skbtmp + ARLAN_FAKE_HDR_LEN, ((char __iomem *) arlan) + rxOffset, pkt_len - ARLAN_FAKE_HDR_LEN);
+ memcpy_fromio(skbtmp, arlan->ultimateDestAddress, 6);
+ memcpy_fromio(skbtmp + 6, arlan->rxSrc, 6);
+ WRITESHMB(arlan->rxStatus, 0x00);
+ arlan_command(dev, ARLAN_COMMAND_RX);
+
+ IFDEBUG(ARLAN_DEBUG_HEADER_DUMP)
+ {
+ char immedDestAddress[6];
+ char immedSrcAddress[6];
+ memcpy_fromio(immedDestAddress, arlan->immedDestAddress, 6);
+ memcpy_fromio(immedSrcAddress, arlan->immedSrcAddress, 6);
+
+ printk(KERN_WARNING "%s t %2x:%2x:%2x:%2x:%2x:%2x f %2x:%2x:%2x:%2x:%2x:%2x imd %2x:%2x:%2x:%2x:%2x:%2x ims %2x:%2x:%2x:%2x:%2x:%2x\n", dev->name,
+ (unsigned char) skbtmp[0], (unsigned char) skbtmp[1], (unsigned char) skbtmp[2], (unsigned char) skbtmp[3],
+ (unsigned char) skbtmp[4], (unsigned char) skbtmp[5], (unsigned char) skbtmp[6], (unsigned char) skbtmp[7],
+ (unsigned char) skbtmp[8], (unsigned char) skbtmp[9], (unsigned char) skbtmp[10], (unsigned char) skbtmp[11],
+ immedDestAddress[0], immedDestAddress[1], immedDestAddress[2],
+ immedDestAddress[3], immedDestAddress[4], immedDestAddress[5],
+ immedSrcAddress[0], immedSrcAddress[1], immedSrcAddress[2],
+ immedSrcAddress[3], immedSrcAddress[4], immedSrcAddress[5]);
+ }
+ skb->protocol = eth_type_trans(skb, dev);
+ IFDEBUG(ARLAN_DEBUG_HEADER_DUMP)
+ if (skb->protocol != 0x608 && skb->protocol != 0x8)
+ {
+ for (i = 0; i <= 22; i++)
+ printk("%02x:", (u_char) skbtmp[i + 12]);
+ printk(KERN_ERR "\n");
+ printk(KERN_WARNING "arlan kernel pkt type trans %x \n", skb->protocol);
+ }
+ netif_rx(skb);
+ dev->last_rx = jiffies;
+ priv->stats.rx_packets++;
+ priv->stats.rx_bytes += pkt_len;
+ }
+ break;
+
+ default:
+ printk(KERN_ERR "arlan intr: received unknown status\n");
+ priv->stats.rx_crc_errors++;
+ break;
+ }
+ ARLAN_DEBUG_EXIT("arlan_rx_interrupt");
+}
+
+static void arlan_process_interrupt(struct net_device *dev)
+{
+ struct arlan_private *priv = netdev_priv(dev);
+ volatile struct arlan_shmem __iomem *arlan = priv->card;
+ u_char rxStatus = READSHMB(arlan->rxStatus);
+ u_char txStatus = READSHMB(arlan->txStatus);
+ u_short rxOffset = READSHMS(arlan->rxOffset);
+ u_short pkt_len = READSHMS(arlan->rxLength);
+ int interrupt_count = 0;
+
+ ARLAN_DEBUG_ENTRY("arlan_process_interrupt");
+
+ if (test_and_set_bit(0, (void *) &priv->interrupt_processing_active))
+ {
+ if (arlan_debug & ARLAN_DEBUG_CHAIN_LOCKS)
+ printk(KERN_ERR "interrupt chain reentering \n");
+ goto end_int_process;
+ }
+ while ((rxStatus || txStatus || priv->interrupt_ack_requested)
+ && (interrupt_count < 5))
+ {
+ if (rxStatus)
+ priv->last_rx_int_ack_time = jiffies;
+
+ arlan_command(dev, ARLAN_COMMAND_INT_ACK);
+ arlan_command(dev, ARLAN_COMMAND_INT_ENABLE);
+
+ IFDEBUG(ARLAN_DEBUG_INTERRUPT)
+ printk(KERN_ERR "%s: got IRQ rx %x tx %x comm %x rxOff %x rxLen %x \n",
+ dev->name, rxStatus, txStatus, READSHMB(arlan->commandByte),
+ rxOffset, pkt_len);
+
+ if (rxStatus == 0 && txStatus == 0)
+ {
+ if (priv->irq_test_done)
+ {
+ if (!registrationBad(dev))
+ IFDEBUG(ARLAN_DEBUG_INTERRUPT) printk(KERN_ERR "%s unknown interrupt(nop? regLost ?) reason tx %d rx %d ",
+ dev->name, txStatus, rxStatus);
+ } else {
+ IFDEBUG(ARLAN_DEBUG_INTERRUPT)
+ printk(KERN_INFO "%s irq $%d test OK \n", dev->name, dev->irq);
+
+ }
+ priv->interrupt_ack_requested = 0;
+ goto ends;
+ }
+ if (txStatus != 0)
+ {
+ WRITESHMB(arlan->txStatus, 0x00);
+ arlan_tx_done_interrupt(dev, txStatus);
+ goto ends;
+ }
+ if (rxStatus == 1 || rxStatus == 2)
+ { /* a packet waiting */
+ arlan_rx_interrupt(dev, rxStatus, rxOffset, pkt_len);
+ goto ends;
+ }
+ if (rxStatus > 2 && rxStatus < 0xff)
+ {
+ WRITESHMB(arlan->rxStatus, 0x00);
+ printk(KERN_ERR "%s unknown rxStatus reason tx %d rx %d ",
+ dev->name, txStatus, rxStatus);
+ goto ends;
+ }
+ if (rxStatus == 0xff)
+ {
+ WRITESHMB(arlan->rxStatus, 0x00);
+ arlan_command(dev, ARLAN_COMMAND_RX);
+ if (registrationBad(dev))
+ netif_device_detach(dev);
+ if (!registrationBad(dev))
+ {
+ priv->registrationLastSeen = jiffies;
+ if (!netif_queue_stopped(dev) && !priv->under_reset && !priv->under_config)
+ netif_wake_queue (dev);
+ }
+ goto ends;
+ }
+ends:
+
+ arlan_command_process(dev);
+
+ rxStatus = READSHMB(arlan->rxStatus);
+ txStatus = READSHMB(arlan->txStatus);
+ rxOffset = READSHMS(arlan->rxOffset);
+ pkt_len = READSHMS(arlan->rxLength);
+
+
+ priv->irq_test_done = 1;
+
+ interrupt_count++;
+ }
+ priv->interrupt_processing_active = 0;
+
+end_int_process:
+ arlan_command_process(dev);
+
+ ARLAN_DEBUG_EXIT("arlan_process_interrupt");
+ return;
+}
+
+static irqreturn_t arlan_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct net_device *dev = dev_id;
+ struct arlan_private *priv = netdev_priv(dev);
+ volatile struct arlan_shmem __iomem *arlan = priv->card;
+ u_char rxStatus = READSHMB(arlan->rxStatus);
+ u_char txStatus = READSHMB(arlan->txStatus);
+
+ ARLAN_DEBUG_ENTRY("arlan_interrupt");
+
+
+ if (!rxStatus && !txStatus)
+ priv->interrupt_ack_requested++;
+
+ arlan_process_interrupt(dev);
+
+ priv->irq_test_done = 1;
+
+ ARLAN_DEBUG_EXIT("arlan_interrupt");
+ return IRQ_HANDLED;
+
+}
+
+
+static int arlan_close(struct net_device *dev)
+{
+ struct arlan_private *priv = netdev_priv(dev);
+
+ ARLAN_DEBUG_ENTRY("arlan_close");
+
+ del_timer_sync(&priv->timer);
+
+ arlan_command(dev, ARLAN_COMMAND_POWERDOWN);
+
+ IFDEBUG(ARLAN_DEBUG_STARTUP)
+ printk(KERN_NOTICE "%s: Closing device\n", dev->name);
+
+ netif_stop_queue(dev);
+ free_irq(dev->irq, dev);
+
+ ARLAN_DEBUG_EXIT("arlan_close");
+ return 0;
+}
+
+#ifdef ARLAN_DEBUGGING
+static long alignLong(volatile u_char * ptr)
+{
+ long ret;
+ memcpy_fromio(&ret, (void *) ptr, 4);
+ return ret;
+}
+#endif
+
+/*
+ * Get the current statistics.
+ * This may be called with the card open or closed.
+ */
+
+static struct net_device_stats *arlan_statistics(struct net_device *dev)
+{
+ struct arlan_private *priv = netdev_priv(dev);
+ volatile struct arlan_shmem __iomem *arlan = priv->card;
+
+
+ ARLAN_DEBUG_ENTRY("arlan_statistics");
+
+ /* Update the statistics from the device registers. */
+
+ READSHM(priv->stats.collisions, arlan->numReTransmissions, u_int);
+ READSHM(priv->stats.rx_crc_errors, arlan->numCRCErrors, u_int);
+ READSHM(priv->stats.rx_dropped, arlan->numFramesDiscarded, u_int);
+ READSHM(priv->stats.rx_fifo_errors, arlan->numRXBufferOverflows, u_int);
+ READSHM(priv->stats.rx_frame_errors, arlan->numReceiveFramesLost, u_int);
+ READSHM(priv->stats.rx_over_errors, arlan->numRXOverruns, u_int);
+ READSHM(priv->stats.rx_packets, arlan->numDatagramsReceived, u_int);
+ READSHM(priv->stats.tx_aborted_errors, arlan->numAbortErrors, u_int);
+ READSHM(priv->stats.tx_carrier_errors, arlan->numStatusTimeouts, u_int);
+ READSHM(priv->stats.tx_dropped, arlan->numDatagramsDiscarded, u_int);
+ READSHM(priv->stats.tx_fifo_errors, arlan->numTXUnderruns, u_int);
+ READSHM(priv->stats.tx_packets, arlan->numDatagramsTransmitted, u_int);
+ READSHM(priv->stats.tx_window_errors, arlan->numHoldOffs, u_int);
+
+ ARLAN_DEBUG_EXIT("arlan_statistics");
+
+ return &priv->stats;
+}
+
+
+static void arlan_set_multicast(struct net_device *dev)
+{
+ struct arlan_private *priv = netdev_priv(dev);
+ volatile struct arlan_shmem __iomem *arlan = priv->card;
+ struct arlan_conf_stru *conf = priv->Conf;
+ int board_conf_needed = 0;
+
+
+ ARLAN_DEBUG_ENTRY("arlan_set_multicast");
+
+ if (dev->flags & IFF_PROMISC)
+ {
+ unsigned char recMode;
+ READSHM(recMode, arlan->receiveMode, u_char);
+ conf->receiveMode = (ARLAN_RCV_PROMISC | ARLAN_RCV_CONTROL);
+ if (conf->receiveMode != recMode)
+ board_conf_needed = 1;
+ }
+ else
+ {
+ /* turn off promiscuous mode */
+ unsigned char recMode;
+ READSHM(recMode, arlan->receiveMode, u_char);
+ conf->receiveMode = ARLAN_RCV_CLEAN | ARLAN_RCV_CONTROL;
+ if (conf->receiveMode != recMode)
+ board_conf_needed = 1;
+ }
+ if (board_conf_needed)
+ arlan_command(dev, ARLAN_COMMAND_CONF);
+
+ ARLAN_DEBUG_EXIT("arlan_set_multicast");
+}
+
+
+struct net_device * __init arlan_probe(int unit)
+{
+ struct net_device *dev;
+ int err;
+ int m;
+
+ ARLAN_DEBUG_ENTRY("arlan_probe");
+
+ if (arlans_found == MAX_ARLANS)
+ return ERR_PTR(-ENODEV);
+
+ /*
+ * Reserve space for local data and a copy of the shared memory
+ * that is used by the /proc interface.
+ */
+ dev = alloc_etherdev(sizeof(struct arlan_private)
+ + sizeof(struct arlan_shmem));
+ if (!dev)
+ return ERR_PTR(-ENOMEM);
+
+ SET_MODULE_OWNER(dev);
+
+ if (unit >= 0) {
+ sprintf(dev->name, "eth%d", unit);
+ netdev_boot_setup_check(dev);
+
+ if (dev->mem_start) {
+ if (arlan_probe_here(dev, dev->mem_start) == 0)
+ goto found;
+ goto not_found;
+ }
+
+ }
+
+
+ for (m = (int)phys_to_virt(lastFoundAt) + ARLAN_SHMEM_SIZE;
+ m <= (int)phys_to_virt(0xDE000);
+ m += ARLAN_SHMEM_SIZE)
+ {
+ if (arlan_probe_here(dev, m) == 0)
+ {
+ lastFoundAt = (int)virt_to_phys((void*)m);
+ goto found;
+ }
+ }
+
+ if (lastFoundAt == 0xbe000)
+ printk(KERN_ERR "arlan: No Arlan devices found \n");
+
+ not_found:
+ free_netdev(dev);
+ return ERR_PTR(-ENODEV);
+
+ found:
+ err = arlan_setup_device(dev, arlans_found);
+ if (err)
+ dev = ERR_PTR(err);
+ else if (!arlans_found++)
+ printk(KERN_INFO "Arlan driver %s\n", arlan_version);
+
+ return dev;
+}
+
+#ifdef MODULE
+int init_module(void)
+{
+ int i = 0;
+
+ ARLAN_DEBUG_ENTRY("init_module");
+
+ if (channelSet != channelSetUNKNOWN || channelNumber != channelNumberUNKNOWN || systemId != systemIdUNKNOWN)
+ return -EINVAL;
+
+ for (i = 0; i < MAX_ARLANS; i++) {
+ struct net_device *dev = arlan_probe(i);
+
+ if (IS_ERR(dev))
+ return PTR_ERR(dev);
+ }
+ init_arlan_proc();
+ printk(KERN_INFO "Arlan driver %s\n", arlan_version);
+ ARLAN_DEBUG_EXIT("init_module");
+ return 0;
+}
+
+
+void cleanup_module(void)
+{
+ int i = 0;
+ struct net_device *dev;
+
+ ARLAN_DEBUG_ENTRY("cleanup_module");
+
+ IFDEBUG(ARLAN_DEBUG_SHUTDOWN)
+ printk(KERN_INFO "arlan: unloading module\n");
+
+ cleanup_arlan_proc();
+
+ for (i = 0; i < MAX_ARLANS; i++)
+ {
+ dev = arlan_device[i];
+ if (dev) {
+ arlan_command(dev, ARLAN_COMMAND_POWERDOWN );
+
+ unregister_netdev(dev);
+ release_mem_region(virt_to_phys((void *) dev->mem_start),
+ ARLAN_SHMEM_SIZE);
+ free_netdev(dev);
+ arlan_device[i] = NULL;
+ }
+ }
+
+ ARLAN_DEBUG_EXIT("cleanup_module");
+}
+
+
+#endif
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/wireless/arlan-proc.c b/drivers/net/wireless/arlan-proc.c
new file mode 100644
index 0000000..a2cca52
--- /dev/null
+++ b/drivers/net/wireless/arlan-proc.c
@@ -0,0 +1,1262 @@
+#include <linux/config.h>
+#include "arlan.h"
+
+#include <linux/sysctl.h>
+
+#ifdef CONFIG_PROC_FS
+
+/* void enableReceive(struct net_device* dev);
+*/
+
+
+
+#define ARLAN_STR_SIZE 0x2ff0
+#define DEV_ARLAN_INFO 1
+#define DEV_ARLAN 1
+#define SARLG(type,var) {\
+ pos += sprintf(arlan_drive_info+pos, "%s\t=\t0x%x\n", #var, READSHMB(priva->card->var)); \
+ }
+
+#define SARLBN(type,var,nn) {\
+ pos += sprintf(arlan_drive_info+pos, "%s\t=\t0x",#var);\
+ for (i=0; i < nn; i++ ) pos += sprintf(arlan_drive_info+pos, "%02x",READSHMB(priva->card->var[i]));\
+ pos += sprintf(arlan_drive_info+pos, "\n"); \
+ }
+
+#define SARLBNpln(type,var,nn) {\
+ for (i=0; i < nn; i++ ) pos += sprintf(arlan_drive_info+pos, "%02x",READSHMB(priva->card->var[i]));\
+ }
+
+#define SARLSTR(var,nn) {\
+ char tmpStr[400];\
+ int tmpLn = nn;\
+ if (nn > 399 ) tmpLn = 399; \
+ memcpy(tmpStr,(char *) priva->conf->var,tmpLn);\
+ tmpStr[tmpLn] = 0; \
+ pos += sprintf(arlan_drive_info+pos, "%s\t=\t%s \n",#var,priva->conf->var);\
+ }
+
+#define SARLUC(var) SARLG(u_char, var)
+#define SARLUCN(var,nn) SARLBN(u_char,var, nn)
+#define SARLUS(var) SARLG(u_short, var)
+#define SARLUSN(var,nn) SARLBN(u_short,var, nn)
+#define SARLUI(var) SARLG(u_int, var)
+
+#define SARLUSA(var) {\
+ u_short tmpVar;\
+ memcpy(&tmpVar, (short *) priva->conf->var,2); \
+ pos += sprintf(arlan_drive_info+pos, "%s\t=\t0x%x\n",#var, tmpVar);\
+}
+
+#define SARLUIA(var) {\
+ u_int tmpVar;\
+ memcpy(&tmpVar, (int* )priva->conf->var,4); \
+ pos += sprintf(arlan_drive_info+pos, "%s\t=\t0x%x\n",#var, tmpVar);\
+}
+
+
+static const char *arlan_diagnostic_info_string(struct net_device *dev)
+{
+
+ struct arlan_private *priv = netdev_priv(dev);
+ volatile struct arlan_shmem __iomem *arlan = priv->card;
+ u_char diagnosticInfo;
+
+ READSHM(diagnosticInfo, arlan->diagnosticInfo, u_char);
+
+ switch (diagnosticInfo)
+ {
+ case 0xFF:
+ return "Diagnostic info is OK";
+ case 0xFE:
+ return "ERROR EPROM Checksum error ";
+ case 0xFD:
+ return "ERROR Local Ram Test Failed ";
+ case 0xFC:
+ return "ERROR SCC failure ";
+ case 0xFB:
+ return "ERROR BackBone failure ";
+ case 0xFA:
+ return "ERROR transceiver not found ";
+ case 0xF9:
+ return "ERROR no more address space ";
+ case 0xF8:
+ return "ERROR Checksum error ";
+ case 0xF7:
+ return "ERROR Missing SS Code";
+ case 0xF6:
+ return "ERROR Invalid config format";
+ case 0xF5:
+ return "ERROR Reserved errorcode F5";
+ case 0xF4:
+ return "ERROR Invalid spreading code/channel number";
+ case 0xF3:
+ return "ERROR Load Code Error";
+ case 0xF2:
+ return "ERROR Reserver errorcode F2 ";
+ case 0xF1:
+ return "ERROR Invalid command receivec by LAN card ";
+ case 0xF0:
+ return "ERROR Invalid parameter found in command ";
+ case 0xEF:
+ return "ERROR On-chip timer failure ";
+ case 0xEE:
+ return "ERROR T410 timer failure ";
+ case 0xED:
+ return "ERROR Too Many TxEnable commands ";
+ case 0xEC:
+ return "ERROR EEPROM error on radio module ";
+ default:
+ return "ERROR unknown Diagnostic info reply code ";
+ }
+}
+
+static const char *arlan_hardware_type_string(struct net_device *dev)
+{
+ u_char hardwareType;
+ struct arlan_private *priv = netdev_priv(dev);
+ volatile struct arlan_shmem __iomem *arlan = priv->card;
+
+ READSHM(hardwareType, arlan->hardwareType, u_char);
+ switch (hardwareType)
+ {
+ case 0x00:
+ return "type A450";
+ case 0x01:
+ return "type A650 ";
+ case 0x04:
+ return "type TMA coproc";
+ case 0x0D:
+ return "type A650E ";
+ case 0x18:
+ return "type TMA coproc Australian";
+ case 0x19:
+ return "type A650A ";
+ case 0x26:
+ return "type TMA coproc European";
+ case 0x2E:
+ return "type A655 ";
+ case 0x2F:
+ return "type A655A ";
+ case 0x30:
+ return "type A655E ";
+ case 0x0B:
+ return "type A670 ";
+ case 0x0C:
+ return "type A670E ";
+ case 0x2D:
+ return "type A670A ";
+ case 0x0F:
+ return "type A411T";
+ case 0x16:
+ return "type A411TA";
+ case 0x1B:
+ return "type A440T";
+ case 0x1C:
+ return "type A412T";
+ case 0x1E:
+ return "type A412TA";
+ case 0x22:
+ return "type A411TE";
+ case 0x24:
+ return "type A412TE";
+ case 0x27:
+ return "type A671T ";
+ case 0x29:
+ return "type A671TA ";
+ case 0x2B:
+ return "type A671TE ";
+ case 0x31:
+ return "type A415T ";
+ case 0x33:
+ return "type A415TA ";
+ case 0x35:
+ return "type A415TE ";
+ case 0x37:
+ return "type A672";
+ case 0x39:
+ return "type A672A ";
+ case 0x3B:
+ return "type A672T";
+ case 0x6B:
+ return "type IC2200";
+ default:
+ return "type A672T";
+ }
+}
+#ifdef ARLAN_DEBUGGING
+static void arlan_print_diagnostic_info(struct net_device *dev)
+{
+ int i;
+ u_char diagnosticInfo;
+ u_short diagnosticOffset;
+ u_char hardwareType;
+ struct arlan_private *priv = netdev_priv(dev);
+ volatile struct arlan_shmem __iomem *arlan = priv->card;
+
+ // ARLAN_DEBUG_ENTRY("arlan_print_diagnostic_info");
+
+ if (READSHMB(arlan->configuredStatusFlag) == 0)
+ printk("Arlan: Card NOT configured\n");
+ else
+ printk("Arlan: Card is configured\n");
+
+ READSHM(diagnosticInfo, arlan->diagnosticInfo, u_char);
+ READSHM(diagnosticOffset, arlan->diagnosticOffset, u_short);
+
+ printk(KERN_INFO "%s\n", arlan_diagnostic_info_string(dev));
+
+ if (diagnosticInfo != 0xff)
+ printk("%s arlan: Diagnostic Offset %d \n", dev->name, diagnosticOffset);
+
+ printk("arlan: LAN CODE ID = ");
+ for (i = 0; i < 6; i++)
+ DEBUGSHM(1, "%03d:", arlan->lanCardNodeId[i], u_char);
+ printk("\n");
+
+ printk("arlan: Arlan BroadCast address = ");
+ for (i = 0; i < 6; i++)
+ DEBUGSHM(1, "%03d:", arlan->broadcastAddress[i], u_char);
+ printk("\n");
+
+ READSHM(hardwareType, arlan->hardwareType, u_char);
+ printk(KERN_INFO "%s\n", arlan_hardware_type_string(dev));
+
+
+ DEBUGSHM(1, "arlan: channelNumber=%d\n", arlan->channelNumber, u_char);
+ DEBUGSHM(1, "arlan: channelSet=%d\n", arlan->channelSet, u_char);
+ DEBUGSHM(1, "arlan: spreadingCode=%d\n", arlan->spreadingCode, u_char);
+ DEBUGSHM(1, "arlan: radioNodeId=%d\n", arlan->radioNodeId, u_short);
+ DEBUGSHM(1, "arlan: SID =%d\n", arlan->SID, u_short);
+ DEBUGSHM(1, "arlan: rxOffset=%d\n", arlan->rxOffset, u_short);
+
+ DEBUGSHM(1, "arlan: registration mode is %d\n", arlan->registrationMode, u_char);
+
+ printk("arlan: name= ");
+ IFDEBUG(1)
+
+ for (i = 0; i < 16; i++)
+ {
+ char c;
+ READSHM(c, arlan->name[i], char);
+ if (c)
+ printk("%c", c);
+ }
+ printk("\n");
+
+// ARLAN_DEBUG_EXIT("arlan_print_diagnostic_info");
+
+}
+
+
+/****************************** TEST MEMORY **************/
+
+static int arlan_hw_test_memory(struct net_device *dev)
+{
+ u_char *ptr;
+ int i;
+ int memlen = sizeof(struct arlan_shmem) - 0xF; /* avoid control register */
+ volatile char *arlan_mem = (char *) (dev->mem_start);
+ struct arlan_private *priv = netdev_priv(dev);
+ volatile struct arlan_shmem __iomem *arlan = priv->card;
+ char pattern;
+
+ ptr = NULL;
+
+ /* hold card in reset state */
+ setHardwareReset(dev);
+
+ /* test memory */
+ pattern = 0;
+ for (i = 0; i < memlen; i++)
+ WRITESHM(arlan_mem[i], ((u_char) pattern++), u_char);
+
+ pattern = 0;
+ for (i = 0; i < memlen; i++)
+ {
+ char res;
+ READSHM(res, arlan_mem[i], char);
+ if (res != pattern++)
+ {
+ printk(KERN_ERR "Arlan driver memory test 1 failed \n");
+ return -1;
+ }
+ }
+
+ pattern = 0;
+ for (i = 0; i < memlen; i++)
+ WRITESHM(arlan_mem[i], ~(pattern++), char);
+
+ pattern = 0;
+ for (i = 0; i < memlen; i++)
+ {
+ char res;
+ READSHM(res, arlan_mem[i], char);
+ if (res != ~(pattern++))
+ {
+ printk(KERN_ERR "Arlan driver memory test 2 failed \n");
+ return -1;
+ }
+ }
+
+ /* zero memory */
+ for (i = 0; i < memlen; i++)
+ WRITESHM(arlan_mem[i], 0x00, char);
+
+ IFDEBUG(1) printk(KERN_INFO "Arlan: memory tests ok\n");
+
+ /* set reset flag and then release reset */
+ WRITESHM(arlan->resetFlag, 0xff, u_char);
+
+ clearChannelAttention(dev);
+ clearHardwareReset(dev);
+
+ /* wait for reset flag to become zero, we'll wait for two seconds */
+ if (arlan_command(dev, ARLAN_COMMAND_LONG_WAIT_NOW))
+ {
+ printk(KERN_ERR "%s arlan: failed to come back from memory test\n", dev->name);
+ return -1;
+ }
+ return 0;
+}
+
+static int arlan_setup_card_by_book(struct net_device *dev)
+{
+ u_char irqLevel, configuredStatusFlag;
+ struct arlan_private *priv = netdev_priv(dev);
+ volatile struct arlan_shmem __iomem *arlan = priv->card;
+
+// ARLAN_DEBUG_ENTRY("arlan_setup_card");
+
+ READSHM(configuredStatusFlag, arlan->configuredStatusFlag, u_char);
+
+ IFDEBUG(10)
+ if (configuredStatusFlag != 0)
+ IFDEBUG(10) printk("arlan: CARD IS CONFIGURED\n");
+ else
+ IFDEBUG(10) printk("arlan: card is NOT configured\n");
+
+ if (testMemory || (READSHMB(arlan->diagnosticInfo) != 0xff))
+ if (arlan_hw_test_memory(dev))
+ return -1;
+
+ DEBUGSHM(4, "arlan configuredStatus = %d \n", arlan->configuredStatusFlag, u_char);
+ DEBUGSHM(4, "arlan driver diagnostic: 0x%2x\n", arlan->diagnosticInfo, u_char);
+
+ /* issue nop command - no interrupt */
+ arlan_command(dev, ARLAN_COMMAND_NOOP);
+ if (arlan_command(dev, ARLAN_COMMAND_WAIT_NOW) != 0)
+ return -1;
+
+ IFDEBUG(50) printk("1st Noop successfully executed !!\n");
+
+ /* try to turn on the arlan interrupts */
+ clearClearInterrupt(dev);
+ setClearInterrupt(dev);
+ setInterruptEnable(dev);
+
+ /* issue nop command - with interrupt */
+
+ arlan_command(dev, ARLAN_COMMAND_NOOPINT);
+ if (arlan_command(dev, ARLAN_COMMAND_WAIT_NOW) != 0)
+ return -1;
+
+
+ IFDEBUG(50) printk("2nd Noop successfully executed !!\n");
+
+ READSHM(irqLevel, arlan->irqLevel, u_char)
+
+ if (irqLevel != dev->irq)
+ {
+ IFDEBUG(1) printk(KERN_WARNING "arlan dip switches set irq to %d\n", irqLevel);
+ printk(KERN_WARNING "device driver irq set to %d - does not match\n", dev->irq);
+ dev->irq = irqLevel;
+ }
+ else
+ IFDEBUG(2) printk("irq level is OK\n");
+
+
+ IFDEBUG(3) arlan_print_diagnostic_info(dev);
+
+ arlan_command(dev, ARLAN_COMMAND_CONF);
+
+ READSHM(configuredStatusFlag, arlan->configuredStatusFlag, u_char);
+ if (configuredStatusFlag == 0)
+ {
+ printk(KERN_WARNING "arlan configure failed\n");
+ return -1;
+ }
+ arlan_command(dev, ARLAN_COMMAND_LONG_WAIT_NOW);
+ arlan_command(dev, ARLAN_COMMAND_RX);
+ arlan_command(dev, ARLAN_COMMAND_LONG_WAIT_NOW);
+ printk(KERN_NOTICE "%s: arlan driver version %s loaded\n",
+ dev->name, arlan_version);
+
+// ARLAN_DEBUG_EXIT("arlan_setup_card");
+
+ return 0; /* no errors */
+}
+#endif
+
+#ifdef ARLAN_PROC_INTERFACE
+#ifdef ARLAN_PROC_SHM_DUMP
+
+static char arlan_drive_info[ARLAN_STR_SIZE] = "A655\n\0";
+
+static int arlan_sysctl_info(ctl_table * ctl, int write, struct file *filp,
+ void __user *buffer, size_t * lenp, loff_t *ppos)
+{
+ int i;
+ int retv, pos, devnum;
+ struct arlan_private *priva = NULL;
+ struct net_device *dev;
+ pos = 0;
+ if (write)
+ {
+ printk("wrirte: ");
+ for (i = 0; i < 100; i++)
+ printk("adi %x \n", arlan_drive_info[i]);
+ }
+ if (ctl->procname == NULL || arlan_drive_info == NULL)
+ {
+ printk(KERN_WARNING " procname is NULL in sysctl_table or arlan_drive_info is NULL \n at arlan module\n ");
+ return -1;
+ }
+ devnum = ctl->procname[5] - '0';
+ if (devnum < 0 || devnum > MAX_ARLANS - 1)
+ {
+ printk(KERN_WARNING "too strange devnum in procfs parse\n ");
+ return -1;
+ }
+ else if (arlan_device[devnum] == NULL)
+ {
+ if (ctl->procname)
+ pos += sprintf(arlan_drive_info + pos, "\t%s\n\n", ctl->procname);
+ pos += sprintf(arlan_drive_info + pos, "No device found here \n");
+ goto final;
+ }
+ else
+ priva = arlan_device[devnum]->priv;
+
+ if (priva == NULL)
+ {
+ printk(KERN_WARNING " Could not find the device private in arlan procsys, bad\n ");
+ return -1;
+ }
+ dev = arlan_device[devnum];
+
+ memcpy_fromio(priva->conf, priva->card, sizeof(struct arlan_shmem));
+
+ pos = sprintf(arlan_drive_info, "Arlan info \n");
+ /* Header Signature */
+ SARLSTR(textRegion, 48);
+ SARLUC(resetFlag);
+ pos += sprintf(arlan_drive_info + pos, "diagnosticInfo\t=\t%s \n", arlan_diagnostic_info_string(dev));
+ SARLUC(diagnosticInfo);
+ SARLUS(diagnosticOffset);
+ SARLUCN(_1, 12);
+ SARLUCN(lanCardNodeId, 6);
+ SARLUCN(broadcastAddress, 6);
+ pos += sprintf(arlan_drive_info + pos, "hardwareType =\t %s \n", arlan_hardware_type_string(dev));
+ SARLUC(hardwareType);
+ SARLUC(majorHardwareVersion);
+ SARLUC(minorHardwareVersion);
+ SARLUC(radioModule);
+ SARLUC(defaultChannelSet);
+ SARLUCN(_2, 47);
+
+ /* Control/Status Block - 0x0080 */
+ SARLUC(interruptInProgress);
+ SARLUC(cntrlRegImage);
+
+ SARLUCN(_3, 14);
+ SARLUC(commandByte);
+ SARLUCN(commandParameter, 15);
+
+ /* Receive Status - 0x00a0 */
+ SARLUC(rxStatus);
+ SARLUC(rxFrmType);
+ SARLUS(rxOffset);
+ SARLUS(rxLength);
+ SARLUCN(rxSrc, 6);
+ SARLUC(rxBroadcastFlag);
+ SARLUC(rxQuality);
+ SARLUC(scrambled);
+ SARLUCN(_4, 1);
+
+ /* Transmit Status - 0x00b0 */
+ SARLUC(txStatus);
+ SARLUC(txAckQuality);
+ SARLUC(numRetries);
+ SARLUCN(_5, 14);
+ SARLUCN(registeredRouter, 6);
+ SARLUCN(backboneRouter, 6);
+ SARLUC(registrationStatus);
+ SARLUC(configuredStatusFlag);
+ SARLUCN(_6, 1);
+ SARLUCN(ultimateDestAddress, 6);
+ SARLUCN(immedDestAddress, 6);
+ SARLUCN(immedSrcAddress, 6);
+ SARLUS(rxSequenceNumber);
+ SARLUC(assignedLocaltalkAddress);
+ SARLUCN(_7, 27);
+
+ /* System Parameter Block */
+
+ /* - Driver Parameters (Novell Specific) */
+
+ SARLUS(txTimeout);
+ SARLUS(transportTime);
+ SARLUCN(_8, 4);
+
+ /* - Configuration Parameters */
+ SARLUC(irqLevel);
+ SARLUC(spreadingCode);
+ SARLUC(channelSet);
+ SARLUC(channelNumber);
+ SARLUS(radioNodeId);
+ SARLUCN(_9, 2);
+ SARLUC(scramblingDisable);
+ SARLUC(radioType);
+ SARLUS(routerId);
+ SARLUCN(_10, 9);
+ SARLUC(txAttenuation);
+ SARLUIA(systemId);
+ SARLUS(globalChecksum);
+ SARLUCN(_11, 4);
+ SARLUS(maxDatagramSize);
+ SARLUS(maxFrameSize);
+ SARLUC(maxRetries);
+ SARLUC(receiveMode);
+ SARLUC(priority);
+ SARLUC(rootOrRepeater);
+ SARLUCN(specifiedRouter, 6);
+ SARLUS(fastPollPeriod);
+ SARLUC(pollDecay);
+ SARLUSA(fastPollDelay);
+ SARLUC(arlThreshold);
+ SARLUC(arlDecay);
+ SARLUCN(_12, 1);
+ SARLUS(specRouterTimeout);
+ SARLUCN(_13, 5);
+
+ /* Scrambled Area */
+ SARLUIA(SID);
+ SARLUCN(encryptionKey, 12);
+ SARLUIA(_14);
+ SARLUSA(waitTime);
+ SARLUSA(lParameter);
+ SARLUCN(_15, 3);
+ SARLUS(headerSize);
+ SARLUS(sectionChecksum);
+
+ SARLUC(registrationMode);
+ SARLUC(registrationFill);
+ SARLUS(pollPeriod);
+ SARLUS(refreshPeriod);
+ SARLSTR(name, 16);
+ SARLUCN(NID, 6);
+ SARLUC(localTalkAddress);
+ SARLUC(codeFormat);
+ SARLUC(numChannels);
+ SARLUC(channel1);
+ SARLUC(channel2);
+ SARLUC(channel3);
+ SARLUC(channel4);
+ SARLUCN(SSCode, 59);
+
+/* SARLUCN( _16, 0x140);
+ */
+ /* Statistics Block - 0x0300 */
+ SARLUC(hostcpuLock);
+ SARLUC(lancpuLock);
+ SARLUCN(resetTime, 18);
+ SARLUIA(numDatagramsTransmitted);
+ SARLUIA(numReTransmissions);
+ SARLUIA(numFramesDiscarded);
+ SARLUIA(numDatagramsReceived);
+ SARLUIA(numDuplicateReceivedFrames);
+ SARLUIA(numDatagramsDiscarded);
+ SARLUS(maxNumReTransmitDatagram);
+ SARLUS(maxNumReTransmitFrames);
+ SARLUS(maxNumConsecutiveDuplicateFrames);
+ /* misaligned here so we have to go to characters */
+ SARLUIA(numBytesTransmitted);
+ SARLUIA(numBytesReceived);
+ SARLUIA(numCRCErrors);
+ SARLUIA(numLengthErrors);
+ SARLUIA(numAbortErrors);
+ SARLUIA(numTXUnderruns);
+ SARLUIA(numRXOverruns);
+ SARLUIA(numHoldOffs);
+ SARLUIA(numFramesTransmitted);
+ SARLUIA(numFramesReceived);
+ SARLUIA(numReceiveFramesLost);
+ SARLUIA(numRXBufferOverflows);
+ SARLUIA(numFramesDiscardedAddrMismatch);
+ SARLUIA(numFramesDiscardedSIDMismatch);
+ SARLUIA(numPollsTransmistted);
+ SARLUIA(numPollAcknowledges);
+ SARLUIA(numStatusTimeouts);
+ SARLUIA(numNACKReceived);
+ SARLUS(auxCmd);
+ SARLUCN(dumpPtr, 4);
+ SARLUC(dumpVal);
+ SARLUC(wireTest);
+
+ /* next 4 seems too long for procfs, over single page ?
+ SARLUCN( _17, 0x86);
+ SARLUCN( txBuffer, 0x800);
+ SARLUCN( rxBuffer, 0x800);
+ SARLUCN( _18, 0x0bff);
+ */
+
+ pos += sprintf(arlan_drive_info + pos, "rxRing\t=\t0x");
+ for (i = 0; i < 0x50; i++)
+ pos += sprintf(arlan_drive_info + pos, "%02x", ((char *) priva->conf)[priva->conf->rxOffset + i]);
+ pos += sprintf(arlan_drive_info + pos, "\n");
+
+ SARLUC(configStatus);
+ SARLUC(_22);
+ SARLUC(progIOCtrl);
+ SARLUC(shareMBase);
+ SARLUC(controlRegister);
+
+ pos += sprintf(arlan_drive_info + pos, " total %d chars\n", pos);
+ if (ctl)
+ if (ctl->procname)
+ pos += sprintf(arlan_drive_info + pos, " driver name : %s\n", ctl->procname);
+final:
+ *lenp = pos;
+
+ if (!write)
+ retv = proc_dostring(ctl, write, filp, buffer, lenp, ppos);
+ else
+ {
+ *lenp = 0;
+ return -1;
+ }
+ return retv;
+}
+
+
+static int arlan_sysctl_info161719(ctl_table * ctl, int write, struct file *filp,
+ void __user *buffer, size_t * lenp, loff_t *ppos)
+{
+ int i;
+ int retv, pos, devnum;
+ struct arlan_private *priva = NULL;
+
+ pos = 0;
+ devnum = ctl->procname[5] - '0';
+ if (arlan_device[devnum] == NULL)
+ {
+ pos += sprintf(arlan_drive_info + pos, "No device found here \n");
+ goto final;
+ }
+ else
+ priva = arlan_device[devnum]->priv;
+ if (priva == NULL)
+ {
+ printk(KERN_WARNING " Could not find the device private in arlan procsys, bad\n ");
+ return -1;
+ }
+ memcpy_fromio(priva->conf, priva->card, sizeof(struct arlan_shmem));
+ SARLUCN(_16, 0xC0);
+ SARLUCN(_17, 0x6A);
+ SARLUCN(_18, 14);
+ SARLUCN(_19, 0x86);
+ SARLUCN(_21, 0x3fd);
+
+final:
+ *lenp = pos;
+ retv = proc_dostring(ctl, write, filp, buffer, lenp, ppos);
+ return retv;
+}
+
+static int arlan_sysctl_infotxRing(ctl_table * ctl, int write, struct file *filp,
+ void __user *buffer, size_t * lenp, loff_t *ppos)
+{
+ int i;
+ int retv, pos, devnum;
+ struct arlan_private *priva = NULL;
+
+ pos = 0;
+ devnum = ctl->procname[5] - '0';
+ if (arlan_device[devnum] == NULL)
+ {
+ pos += sprintf(arlan_drive_info + pos, "No device found here \n");
+ goto final;
+ }
+ else
+ priva = arlan_device[devnum]->priv;
+ if (priva == NULL)
+ {
+ printk(KERN_WARNING " Could not find the device private in arlan procsys, bad\n ");
+ return -1;
+ }
+ memcpy_fromio(priva->conf, priva->card, sizeof(struct arlan_shmem));
+ SARLBNpln(u_char, txBuffer, 0x800);
+final:
+ *lenp = pos;
+ retv = proc_dostring(ctl, write, filp, buffer, lenp, ppos);
+ return retv;
+}
+
+static int arlan_sysctl_inforxRing(ctl_table * ctl, int write, struct file *filp,
+ void __user *buffer, size_t * lenp, loff_t *ppos)
+{
+ int i;
+ int retv, pos, devnum;
+ struct arlan_private *priva = NULL;
+
+ pos = 0;
+ devnum = ctl->procname[5] - '0';
+ if (arlan_device[devnum] == NULL)
+ {
+ pos += sprintf(arlan_drive_info + pos, "No device found here \n");
+ goto final;
+ } else
+ priva = arlan_device[devnum]->priv;
+ if (priva == NULL)
+ {
+ printk(KERN_WARNING " Could not find the device private in arlan procsys, bad\n ");
+ return -1;
+ }
+ memcpy_fromio(priva->conf, priva->card, sizeof(struct arlan_shmem));
+ SARLBNpln(u_char, rxBuffer, 0x800);
+final:
+ *lenp = pos;
+ retv = proc_dostring(ctl, write, filp, buffer, lenp, ppos);
+ return retv;
+}
+
+static int arlan_sysctl_info18(ctl_table * ctl, int write, struct file *filp,
+ void __user *buffer, size_t * lenp, loff_t *ppos)
+{
+ int i;
+ int retv, pos, devnum;
+ struct arlan_private *priva = NULL;
+
+ pos = 0;
+ devnum = ctl->procname[5] - '0';
+ if (arlan_device[devnum] == NULL)
+ {
+ pos += sprintf(arlan_drive_info + pos, "No device found here \n");
+ goto final;
+ }
+ else
+ priva = arlan_device[devnum]->priv;
+ if (priva == NULL)
+ {
+ printk(KERN_WARNING " Could not find the device private in arlan procsys, bad\n ");
+ return -1;
+ }
+ memcpy_fromio(priva->conf, priva->card, sizeof(struct arlan_shmem));
+ SARLBNpln(u_char, _18, 0x800);
+
+final:
+ *lenp = pos;
+ retv = proc_dostring(ctl, write, filp, buffer, lenp, ppos);
+ return retv;
+}
+
+
+#endif /* #ifdef ARLAN_PROC_SHM_DUMP */
+
+
+static char conf_reset_result[200];
+
+static int arlan_configure(ctl_table * ctl, int write, struct file *filp,
+ void __user *buffer, size_t * lenp, loff_t *ppos)
+{
+ int pos = 0;
+ int devnum = ctl->procname[6] - '0';
+ struct arlan_private *priv;
+
+ if (devnum < 0 || devnum > MAX_ARLANS - 1)
+ {
+ printk(KERN_WARNING "too strange devnum in procfs parse\n ");
+ return -1;
+ }
+ else if (arlan_device[devnum] != NULL)
+ {
+ priv = arlan_device[devnum]->priv;
+
+ arlan_command(arlan_device[devnum], ARLAN_COMMAND_CLEAN_AND_CONF);
+ }
+ else
+ return -1;
+
+ *lenp = pos;
+ return proc_dostring(ctl, write, filp, buffer, lenp, ppos);
+}
+
+static int arlan_sysctl_reset(ctl_table * ctl, int write, struct file *filp,
+ void __user *buffer, size_t * lenp, loff_t *ppos)
+{
+ int pos = 0;
+ int devnum = ctl->procname[5] - '0';
+ struct arlan_private *priv;
+
+ if (devnum < 0 || devnum > MAX_ARLANS - 1)
+ {
+ printk(KERN_WARNING "too strange devnum in procfs parse\n ");
+ return -1;
+ }
+ else if (arlan_device[devnum] != NULL)
+ {
+ priv = arlan_device[devnum]->priv;
+ arlan_command(arlan_device[devnum], ARLAN_COMMAND_CLEAN_AND_RESET);
+
+ } else
+ return -1;
+ *lenp = pos + 3;
+ return proc_dostring(ctl, write, filp, buffer, lenp, ppos);
+}
+
+
+/* Place files in /proc/sys/dev/arlan */
+#define CTBLN(num,card,nam) \
+ { .ctl_name = num,\
+ .procname = #nam,\
+ .data = &(arlan_conf[card].nam),\
+ .maxlen = sizeof(int), .mode = 0600, .proc_handler = &proc_dointvec}
+#ifdef ARLAN_DEBUGGING
+
+#define ARLAN_PROC_DEBUG_ENTRIES \
+ { .ctl_name = 48, .procname = "entry_exit_debug",\
+ .data = &arlan_entry_and_exit_debug,\
+ .maxlen = sizeof(int), .mode = 0600, .proc_handler = &proc_dointvec},\
+ { .ctl_name = 49, .procname = "debug", .data = &arlan_debug,\
+ .maxlen = sizeof(int), .mode = 0600, .proc_handler = &proc_dointvec},
+#else
+#define ARLAN_PROC_DEBUG_ENTRIES
+#endif
+
+#define ARLAN_SYSCTL_TABLE_TOTAL(cardNo)\
+ CTBLN(1,cardNo,spreadingCode),\
+ CTBLN(2,cardNo, channelNumber),\
+ CTBLN(3,cardNo, scramblingDisable),\
+ CTBLN(4,cardNo, txAttenuation),\
+ CTBLN(5,cardNo, systemId), \
+ CTBLN(6,cardNo, maxDatagramSize),\
+ CTBLN(7,cardNo, maxFrameSize),\
+ CTBLN(8,cardNo, maxRetries),\
+ CTBLN(9,cardNo, receiveMode),\
+ CTBLN(10,cardNo, priority),\
+ CTBLN(11,cardNo, rootOrRepeater),\
+ CTBLN(12,cardNo, SID),\
+ CTBLN(13,cardNo, registrationMode),\
+ CTBLN(14,cardNo, registrationFill),\
+ CTBLN(15,cardNo, localTalkAddress),\
+ CTBLN(16,cardNo, codeFormat),\
+ CTBLN(17,cardNo, numChannels),\
+ CTBLN(18,cardNo, channel1),\
+ CTBLN(19,cardNo, channel2),\
+ CTBLN(20,cardNo, channel3),\
+ CTBLN(21,cardNo, channel4),\
+ CTBLN(22,cardNo, txClear),\
+ CTBLN(23,cardNo, txRetries),\
+ CTBLN(24,cardNo, txRouting),\
+ CTBLN(25,cardNo, txScrambled),\
+ CTBLN(26,cardNo, rxParameter),\
+ CTBLN(27,cardNo, txTimeoutMs),\
+ CTBLN(28,cardNo, waitCardTimeout),\
+ CTBLN(29,cardNo, channelSet), \
+ {.ctl_name = 30, .procname = "name",\
+ .data = arlan_conf[cardNo].siteName,\
+ .maxlen = 16, .mode = 0600, .proc_handler = &proc_dostring},\
+ CTBLN(31,cardNo,waitTime),\
+ CTBLN(32,cardNo,lParameter),\
+ CTBLN(33,cardNo,_15),\
+ CTBLN(34,cardNo,headerSize),\
+ CTBLN(36,cardNo,tx_delay_ms),\
+ CTBLN(37,cardNo,retries),\
+ CTBLN(38,cardNo,ReTransmitPacketMaxSize),\
+ CTBLN(39,cardNo,waitReTransmitPacketMaxSize),\
+ CTBLN(40,cardNo,fastReTransCount),\
+ CTBLN(41,cardNo,driverRetransmissions),\
+ CTBLN(42,cardNo,txAckTimeoutMs),\
+ CTBLN(43,cardNo,registrationInterrupts),\
+ CTBLN(44,cardNo,hardwareType),\
+ CTBLN(45,cardNo,radioType),\
+ CTBLN(46,cardNo,writeEEPROM),\
+ CTBLN(47,cardNo,writeRadioType),\
+ ARLAN_PROC_DEBUG_ENTRIES\
+ CTBLN(50,cardNo,in_speed),\
+ CTBLN(51,cardNo,out_speed),\
+ CTBLN(52,cardNo,in_speed10),\
+ CTBLN(53,cardNo,out_speed10),\
+ CTBLN(54,cardNo,in_speed_max),\
+ CTBLN(55,cardNo,out_speed_max),\
+ CTBLN(56,cardNo,measure_rate),\
+ CTBLN(57,cardNo,pre_Command_Wait),\
+ CTBLN(58,cardNo,rx_tweak1),\
+ CTBLN(59,cardNo,rx_tweak2),\
+ CTBLN(60,cardNo,tx_queue_len),\
+
+
+
+static ctl_table arlan_conf_table0[] =
+{
+ ARLAN_SYSCTL_TABLE_TOTAL(0)
+
+#ifdef ARLAN_PROC_SHM_DUMP
+ {
+ .ctl_name = 150,
+ .procname = "arlan0-txRing",
+ .data = &arlan_drive_info,
+ .maxlen = ARLAN_STR_SIZE,
+ .mode = 0400,
+ .proc_handler = &arlan_sysctl_infotxRing,
+ },
+ {
+ .ctl_name = 151,
+ .procname = "arlan0-rxRing",
+ .data = &arlan_drive_info,
+ .maxlen = ARLAN_STR_SIZE,
+ .mode = 0400,
+ .proc_handler = &arlan_sysctl_inforxRing,
+ },
+ {
+ .ctl_name = 152,
+ .procname = "arlan0-18",
+ .data = &arlan_drive_info,
+ .maxlen = ARLAN_STR_SIZE,
+ .mode = 0400,
+ .proc_handler = &arlan_sysctl_info18,
+ },
+ {
+ .ctl_name = 153,
+ .procname = "arlan0-ring",
+ .data = &arlan_drive_info,
+ .maxlen = ARLAN_STR_SIZE,
+ .mode = 0400,
+ .proc_handler = &arlan_sysctl_info161719,
+ },
+ {
+ .ctl_name = 154,
+ .procname = "arlan0-shm-cpy",
+ .data = &arlan_drive_info,
+ .maxlen = ARLAN_STR_SIZE,
+ .mode = 0400,
+ .proc_handler = &arlan_sysctl_info,
+ },
+#endif
+ {
+ .ctl_name = 155,
+ .procname = "config0",
+ .data = &conf_reset_result,
+ .maxlen = 100,
+ .mode = 0400,
+ .proc_handler = &arlan_configure
+ },
+ {
+ .ctl_name = 156,
+ .procname = "reset0",
+ .data = &conf_reset_result,
+ .maxlen = 100,
+ .mode = 0400,
+ .proc_handler = &arlan_sysctl_reset,
+ },
+ { .ctl_name = 0 }
+};
+
+static ctl_table arlan_conf_table1[] =
+{
+
+ ARLAN_SYSCTL_TABLE_TOTAL(1)
+
+#ifdef ARLAN_PROC_SHM_DUMP
+ {
+ .ctl_name = 150,
+ .procname = "arlan1-txRing",
+ .data = &arlan_drive_info,
+ .maxlen = ARLAN_STR_SIZE,
+ .mode = 0400,
+ .proc_handler = &arlan_sysctl_infotxRing,
+ },
+ {
+ .ctl_name = 151,
+ .procname = "arlan1-rxRing",
+ .data = &arlan_drive_info,
+ .maxlen = ARLAN_STR_SIZE,
+ .mode = 0400,
+ .proc_handler = &arlan_sysctl_inforxRing,
+ },
+ {
+ .ctl_name = 152,
+ .procname = "arlan1-18",
+ .data = &arlan_drive_info,
+ .maxlen = ARLAN_STR_SIZE,
+ .mode = 0400,
+ .proc_handler = &arlan_sysctl_info18,
+ },
+ {
+ .ctl_name = 153,
+ .procname = "arlan1-ring",
+ .data = &arlan_drive_info,
+ .maxlen = ARLAN_STR_SIZE,
+ .mode = 0400,
+ .proc_handler = &arlan_sysctl_info161719,
+ },
+ {
+ .ctl_name = 154,
+ .procname = "arlan1-shm-cpy",
+ .data = &arlan_drive_info,
+ .maxlen = ARLAN_STR_SIZE,
+ .mode = 0400,
+ .proc_handler = &arlan_sysctl_info,
+ },
+#endif
+ {
+ .ctl_name = 155,
+ .procname = "config1",
+ .data = &conf_reset_result,
+ .maxlen = 100,
+ .mode = 0400,
+ .proc_handler = &arlan_configure,
+ },
+ {
+ .ctl_name = 156,
+ .procname = "reset1",
+ .data = &conf_reset_result,
+ .maxlen = 100,
+ .mode = 0400,
+ .proc_handler = &arlan_sysctl_reset,
+ },
+ { .ctl_name = 0 }
+};
+
+static ctl_table arlan_conf_table2[] =
+{
+
+ ARLAN_SYSCTL_TABLE_TOTAL(2)
+
+#ifdef ARLAN_PROC_SHM_DUMP
+ {
+ .ctl_name = 150,
+ .procname = "arlan2-txRing",
+ .data = &arlan_drive_info,
+ .maxlen = ARLAN_STR_SIZE,
+ .mode = 0400,
+ .proc_handler = &arlan_sysctl_infotxRing,
+ },
+ {
+ .ctl_name = 151,
+ .procname = "arlan2-rxRing",
+ .data = &arlan_drive_info,
+ .maxlen = ARLAN_STR_SIZE,
+ .mode = 0400,
+ .proc_handler = &arlan_sysctl_inforxRing,
+ },
+ {
+ .ctl_name = 152,
+ .procname = "arlan2-18",
+ .data = &arlan_drive_info,
+ .maxlen = ARLAN_STR_SIZE,
+ .mode = 0400,
+ .proc_handler = &arlan_sysctl_info18,
+ },
+ {
+ .ctl_name = 153,
+ .procname = "arlan2-ring",
+ .data = &arlan_drive_info,
+ .maxlen = ARLAN_STR_SIZE,
+ .mode = 0400,
+ .proc_handler = &arlan_sysctl_info161719,
+ },
+ {
+ .ctl_name = 154,
+ .procname = "arlan2-shm-cpy",
+ .data = &arlan_drive_info,
+ .maxlen = ARLAN_STR_SIZE,
+ .mode = 0400,
+ .proc_handler = &arlan_sysctl_info,
+ },
+#endif
+ {
+ .ctl_name = 155,
+ .procname = "config2",
+ .data = &conf_reset_result,
+ .maxlen = 100,
+ .mode = 0400,
+ .proc_handler = &arlan_configure,
+ },
+ {
+ .ctl_name = 156,
+ .procname = "reset2",
+ .data = &conf_reset_result,
+ .maxlen = 100,
+ .mode = 0400,
+ .proc_handler = &arlan_sysctl_reset,
+ },
+ { .ctl_name = 0 }
+};
+
+static ctl_table arlan_conf_table3[] =
+{
+
+ ARLAN_SYSCTL_TABLE_TOTAL(3)
+
+#ifdef ARLAN_PROC_SHM_DUMP
+ {
+ .ctl_name = 150,
+ .procname = "arlan3-txRing",
+ .data = &arlan_drive_info,
+ .maxlen = ARLAN_STR_SIZE,
+ .mode = 0400,
+ .proc_handler = &arlan_sysctl_infotxRing,
+ },
+ {
+ .ctl_name = 151,
+ .procname = "arlan3-rxRing",
+ .data = &arlan_drive_info,
+ .maxlen = ARLAN_STR_SIZE,
+ .mode = 0400,
+ .proc_handler = &arlan_sysctl_inforxRing,
+ },
+ {
+ .ctl_name = 152,
+ .procname = "arlan3-18",
+ .data = &arlan_drive_info,
+ .maxlen = ARLAN_STR_SIZE,
+ .mode = 0400,
+ .proc_handler = &arlan_sysctl_info18,
+ },
+ {
+ .ctl_name = 153,
+ .procname = "arlan3-ring",
+ .data = &arlan_drive_info,
+ .maxlen = ARLAN_STR_SIZE,
+ .mode = 0400,
+ .proc_handler = &arlan_sysctl_info161719,
+ },
+ {
+ .ctl_name = 154,
+ .procname = "arlan3-shm-cpy",
+ .data = &arlan_drive_info,
+ .maxlen = ARLAN_STR_SIZE,
+ .mode = 0400,
+ .proc_handler = &arlan_sysctl_info,
+ },
+#endif
+ {
+ .ctl_name = 155,
+ .procname = "config3",
+ .data = &conf_reset_result,
+ .maxlen = 100,
+ .mode = 0400,
+ .proc_handler = &arlan_configure,
+ },
+ {
+ .ctl_name = 156,
+ .procname = "reset3",
+ .data = &conf_reset_result,
+ .maxlen = 100,
+ .mode = 0400,
+ .proc_handler = &arlan_sysctl_reset,
+ },
+ { .ctl_name = 0 }
+};
+
+
+
+static ctl_table arlan_table[] =
+{
+ {
+ .ctl_name = 0,
+ .procname = "arlan0",
+ .maxlen = 0,
+ .mode = 0600,
+ .child = arlan_conf_table0,
+ },
+ {
+ .ctl_name = 0,
+ .procname = "arlan1",
+ .maxlen = 0,
+ .mode = 0600,
+ .child = arlan_conf_table1,
+ },
+ {
+ .ctl_name = 0,
+ .procname = "arlan2",
+ .maxlen = 0,
+ .mode = 0600,
+ .child = arlan_conf_table2,
+ },
+ {
+ .ctl_name = 0,
+ .procname = "arlan3",
+ .maxlen = 0,
+ .mode = 0600,
+ .child = arlan_conf_table3,
+ },
+ { .ctl_name = 0 }
+};
+
+#else
+
+static ctl_table arlan_table[MAX_ARLANS + 1] =
+{
+ { .ctl_name = 0 }
+};
+#endif
+#else
+
+static ctl_table arlan_table[MAX_ARLANS + 1] =
+{
+ { .ctl_name = 0 }
+};
+#endif
+
+
+// static int mmtu = 1234;
+
+static ctl_table arlan_root_table[] =
+{
+ {
+ .ctl_name = 254,
+ .procname = "arlan",
+ .maxlen = 0,
+ .mode = 0555,
+ .child = arlan_table,
+ },
+ { .ctl_name = 0 }
+};
+
+/* Make sure that /proc/sys/dev is there */
+//static ctl_table arlan_device_root_table[] =
+//{
+// {CTL_DEV, "dev", NULL, 0, 0555, arlan_root_table},
+// {0}
+//};
+
+
+#ifdef CONFIG_PROC_FS
+static struct ctl_table_header *arlan_device_sysctl_header;
+
+int __init init_arlan_proc(void)
+{
+
+ int i = 0;
+ if (arlan_device_sysctl_header)
+ return 0;
+ for (i = 0; i < MAX_ARLANS && arlan_device[i]; i++)
+ arlan_table[i].ctl_name = i + 1;
+ arlan_device_sysctl_header = register_sysctl_table(arlan_root_table, 0);
+ if (!arlan_device_sysctl_header)
+ return -1;
+
+ return 0;
+
+}
+
+void __exit cleanup_arlan_proc(void)
+{
+ unregister_sysctl_table(arlan_device_sysctl_header);
+ arlan_device_sysctl_header = NULL;
+
+}
+#endif
diff --git a/drivers/net/wireless/arlan.h b/drivers/net/wireless/arlan.h
new file mode 100644
index 0000000..70a6d7b
--- /dev/null
+++ b/drivers/net/wireless/arlan.h
@@ -0,0 +1,541 @@
+/*
+ * Copyright (C) 1997 Cullen Jennings
+ * Copyright (C) 1998 Elmer.Joandi@ut.ee, +37-255-13500
+ * GNU General Public License applies
+ */
+
+#include <linux/module.h>
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/skbuff.h>
+#include <linux/if_ether.h> /* For the statistics structure. */
+#include <linux/if_arp.h> /* For ARPHRD_ETHER */
+#include <linux/ptrace.h>
+#include <linux/ioport.h>
+#include <linux/in.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+
+#include <linux/init.h>
+#include <linux/bitops.h>
+#include <asm/system.h>
+#include <asm/io.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+
+
+//#define ARLAN_DEBUGGING 1
+
+#define ARLAN_PROC_INTERFACE
+#define MAX_ARLANS 4 /* not more than 4 ! */
+#define ARLAN_PROC_SHM_DUMP /* shows all card registers, makes driver way larger */
+
+#define ARLAN_MAX_MULTICAST_ADDRS 16
+#define ARLAN_RCV_CLEAN 0
+#define ARLAN_RCV_PROMISC 1
+#define ARLAN_RCV_CONTROL 2
+
+#ifdef CONFIG_PROC_FS
+extern int init_arlan_proc(void);
+extern void cleanup_arlan_proc(void);
+#else
+#define init_arlan_proc() ({ 0; })
+#define cleanup_arlan_proc() do { } while (0)
+#endif
+
+extern struct net_device *arlan_device[MAX_ARLANS];
+extern int arlan_debug;
+extern int arlan_entry_debug;
+extern int arlan_exit_debug;
+extern int testMemory;
+extern int arlan_command(struct net_device * dev, int command);
+
+#define SIDUNKNOWN -1
+#define radioNodeIdUNKNOWN -1
+#define irqUNKNOWN 0
+#define debugUNKNOWN 0
+#define testMemoryUNKNOWN 1
+#define spreadingCodeUNKNOWN 0
+#define channelNumberUNKNOWN 0
+#define channelSetUNKNOWN 0
+#define systemIdUNKNOWN -1
+#define registrationModeUNKNOWN -1
+
+
+#define IFDEBUG( L ) if ( (L) & arlan_debug )
+#define ARLAN_FAKE_HDR_LEN 12
+
+#ifdef ARLAN_DEBUGGING
+ #define DEBUG 1
+ #define ARLAN_ENTRY_EXIT_DEBUGGING 1
+ #define ARLAN_DEBUG(a,b) printk(KERN_DEBUG a, b)
+#else
+ #define ARLAN_DEBUG(a,b)
+#endif
+
+#define ARLAN_SHMEM_SIZE 0x2000
+
+struct arlan_shmem
+{
+ /* Header Signature */
+ volatile char textRegion[48];
+ volatile u_char resetFlag;
+ volatile u_char diagnosticInfo;
+ volatile u_short diagnosticOffset;
+ volatile u_char _1[12];
+ volatile u_char lanCardNodeId[6];
+ volatile u_char broadcastAddress[6];
+ volatile u_char hardwareType;
+ volatile u_char majorHardwareVersion;
+ volatile u_char minorHardwareVersion;
+ volatile u_char radioModule;// shows EEPROM, can be overridden at 0x111
+ volatile u_char defaultChannelSet; // shows EEProm, can be overriiden at 0x10A
+ volatile u_char _2[47];
+
+ /* Control/Status Block - 0x0080 */
+ volatile u_char interruptInProgress; /* not used by lancpu */
+ volatile u_char cntrlRegImage; /* not used by lancpu */
+ volatile u_char _3[13];
+ volatile u_char dumpByte;
+ volatile u_char commandByte; /* non-zero = active */
+ volatile u_char commandParameter[15];
+
+ /* Receive Status - 0x00a0 */
+ volatile u_char rxStatus; /* 1- data, 2-control, 0xff - registr change */
+ volatile u_char rxFrmType;
+ volatile u_short rxOffset;
+ volatile u_short rxLength;
+ volatile u_char rxSrc[6];
+ volatile u_char rxBroadcastFlag;
+ volatile u_char rxQuality;
+ volatile u_char scrambled;
+ volatile u_char _4[1];
+
+ /* Transmit Status - 0x00b0 */
+ volatile u_char txStatus;
+ volatile u_char txAckQuality;
+ volatile u_char numRetries;
+ volatile u_char _5[14];
+ volatile u_char registeredRouter[6];
+ volatile u_char backboneRouter[6];
+ volatile u_char registrationStatus;
+ volatile u_char configuredStatusFlag;
+ volatile u_char _6[1];
+ volatile u_char ultimateDestAddress[6];
+ volatile u_char immedDestAddress[6];
+ volatile u_char immedSrcAddress[6];
+ volatile u_short rxSequenceNumber;
+ volatile u_char assignedLocaltalkAddress;
+ volatile u_char _7[27];
+
+ /* System Parameter Block */
+
+ /* - Driver Parameters (Novell Specific) */
+
+ volatile u_short txTimeout;
+ volatile u_short transportTime;
+ volatile u_char _8[4];
+
+ /* - Configuration Parameters */
+ volatile u_char irqLevel;
+ volatile u_char spreadingCode;
+ volatile u_char channelSet;
+ volatile u_char channelNumber;
+ volatile u_short radioNodeId;
+ volatile u_char _9[2];
+ volatile u_char scramblingDisable;
+ volatile u_char radioType;
+ volatile u_short routerId;
+ volatile u_char _10[9];
+ volatile u_char txAttenuation;
+ volatile u_char systemId[4];
+ volatile u_short globalChecksum;
+ volatile u_char _11[4];
+ volatile u_short maxDatagramSize;
+ volatile u_short maxFrameSize;
+ volatile u_char maxRetries;
+ volatile u_char receiveMode;
+ volatile u_char priority;
+ volatile u_char rootOrRepeater;
+ volatile u_char specifiedRouter[6];
+ volatile u_short fastPollPeriod;
+ volatile u_char pollDecay;
+ volatile u_char fastPollDelay[2];
+ volatile u_char arlThreshold;
+ volatile u_char arlDecay;
+ volatile u_char _12[1];
+ volatile u_short specRouterTimeout;
+ volatile u_char _13[5];
+
+ /* Scrambled Area */
+ volatile u_char SID[4];
+ volatile u_char encryptionKey[12];
+ volatile u_char _14[2];
+ volatile u_char waitTime[2];
+ volatile u_char lParameter[2];
+ volatile u_char _15[3];
+ volatile u_short headerSize;
+ volatile u_short sectionChecksum;
+
+ volatile u_char registrationMode;
+ volatile u_char registrationFill;
+ volatile u_short pollPeriod;
+ volatile u_short refreshPeriod;
+ volatile u_char name[16];
+ volatile u_char NID[6];
+ volatile u_char localTalkAddress;
+ volatile u_char codeFormat;
+ volatile u_char numChannels;
+ volatile u_char channel1;
+ volatile u_char channel2;
+ volatile u_char channel3;
+ volatile u_char channel4;
+ volatile u_char SSCode[59];
+
+ volatile u_char _16[0xC0];
+ volatile u_short auxCmd;
+ volatile u_char dumpPtr[4];
+ volatile u_char dumpVal;
+ volatile u_char _17[0x6A];
+ volatile u_char wireTest;
+ volatile u_char _18[14];
+
+ /* Statistics Block - 0x0300 */
+ volatile u_char hostcpuLock;
+ volatile u_char lancpuLock;
+ volatile u_char resetTime[18];
+
+ volatile u_char numDatagramsTransmitted[4];
+ volatile u_char numReTransmissions[4];
+ volatile u_char numFramesDiscarded[4];
+ volatile u_char numDatagramsReceived[4];
+ volatile u_char numDuplicateReceivedFrames[4];
+ volatile u_char numDatagramsDiscarded[4];
+
+ volatile u_short maxNumReTransmitDatagram;
+ volatile u_short maxNumReTransmitFrames;
+ volatile u_short maxNumConsecutiveDuplicateFrames;
+ /* misaligned here so we have to go to characters */
+
+ volatile u_char numBytesTransmitted[4];
+ volatile u_char numBytesReceived[4];
+ volatile u_char numCRCErrors[4];
+ volatile u_char numLengthErrors[4];
+ volatile u_char numAbortErrors[4];
+ volatile u_char numTXUnderruns[4];
+ volatile u_char numRXOverruns[4];
+ volatile u_char numHoldOffs[4];
+ volatile u_char numFramesTransmitted[4];
+ volatile u_char numFramesReceived[4];
+ volatile u_char numReceiveFramesLost[4];
+ volatile u_char numRXBufferOverflows[4];
+ volatile u_char numFramesDiscardedAddrMismatch[4];
+ volatile u_char numFramesDiscardedSIDMismatch[4];
+ volatile u_char numPollsTransmistted[4];
+ volatile u_char numPollAcknowledges[4];
+ volatile u_char numStatusTimeouts[4];
+ volatile u_char numNACKReceived[4];
+
+ volatile u_char _19[0x86];
+
+ volatile u_char txBuffer[0x800];
+ volatile u_char rxBuffer[0x800];
+
+ volatile u_char _20[0x800];
+ volatile u_char _21[0x3fb];
+ volatile u_char configStatus;
+ volatile u_char _22;
+ volatile u_char progIOCtrl;
+ volatile u_char shareMBase;
+ volatile u_char controlRegister;
+};
+
+struct arlan_conf_stru {
+ int spreadingCode;
+ int channelSet;
+ int channelNumber;
+ int scramblingDisable;
+ int txAttenuation;
+ int systemId;
+ int maxDatagramSize;
+ int maxFrameSize;
+ int maxRetries;
+ int receiveMode;
+ int priority;
+ int rootOrRepeater;
+ int SID;
+ int radioNodeId;
+ int registrationMode;
+ int registrationFill;
+ int localTalkAddress;
+ int codeFormat;
+ int numChannels;
+ int channel1;
+ int channel2;
+ int channel3;
+ int channel4;
+ int txClear;
+ int txRetries;
+ int txRouting;
+ int txScrambled;
+ int rxParameter;
+ int txTimeoutMs;
+ int txAckTimeoutMs;
+ int waitCardTimeout;
+ int waitTime;
+ int lParameter;
+ int _15;
+ int headerSize;
+ int retries;
+ int tx_delay_ms;
+ int waitReTransmitPacketMaxSize;
+ int ReTransmitPacketMaxSize;
+ int fastReTransCount;
+ int driverRetransmissions;
+ int registrationInterrupts;
+ int hardwareType;
+ int radioType;
+ int writeRadioType;
+ int writeEEPROM;
+ char siteName[17];
+ int measure_rate;
+ int in_speed;
+ int out_speed;
+ int in_speed10;
+ int out_speed10;
+ int in_speed_max;
+ int out_speed_max;
+ int pre_Command_Wait;
+ int rx_tweak1;
+ int rx_tweak2;
+ int tx_queue_len;
+};
+
+extern struct arlan_conf_stru arlan_conf[MAX_ARLANS];
+
+struct TxParam
+{
+ volatile short offset;
+ volatile short length;
+ volatile u_char dest[6];
+ volatile unsigned char clear;
+ volatile unsigned char retries;
+ volatile unsigned char routing;
+ volatile unsigned char scrambled;
+};
+
+#define TX_RING_SIZE 2
+/* Information that need to be kept for each board. */
+struct arlan_private {
+ struct net_device_stats stats;
+ struct arlan_shmem __iomem * card;
+ struct arlan_shmem * conf;
+
+ struct arlan_conf_stru * Conf;
+ int bad;
+ int reset;
+ unsigned long lastReset;
+ struct timer_list timer;
+ struct timer_list tx_delay_timer;
+ struct timer_list tx_retry_timer;
+ struct timer_list rx_check_timer;
+
+ int registrationLostCount;
+ int reRegisterExp;
+ int irq_test_done;
+
+ struct TxParam txRing[TX_RING_SIZE];
+ char reTransmitBuff[0x800];
+ int txLast;
+ unsigned ReTransmitRequested;
+ unsigned long tx_done_delayed;
+ unsigned long registrationLastSeen;
+
+ unsigned long tx_last_sent;
+ unsigned long tx_last_cleared;
+ unsigned long retransmissions;
+ unsigned long interrupt_ack_requested;
+ spinlock_t lock;
+ unsigned long waiting_command_mask;
+ unsigned long card_polling_interval;
+ unsigned long last_command_buff_free_time;
+
+ int under_reset;
+ int under_config;
+ int rx_command_given;
+ int tx_command_given;
+ unsigned long interrupt_processing_active;
+ unsigned long last_rx_int_ack_time;
+ unsigned long in_bytes;
+ unsigned long out_bytes;
+ unsigned long in_time;
+ unsigned long out_time;
+ unsigned long in_time10;
+ unsigned long out_time10;
+ unsigned long in_bytes10;
+ unsigned long out_bytes10;
+ int init_etherdev_alloc;
+};
+
+
+
+#define ARLAN_CLEAR 0x00
+#define ARLAN_RESET 0x01
+#define ARLAN_CHANNEL_ATTENTION 0x02
+#define ARLAN_INTERRUPT_ENABLE 0x04
+#define ARLAN_CLEAR_INTERRUPT 0x08
+#define ARLAN_POWER 0x40
+#define ARLAN_ACCESS 0x80
+
+#define ARLAN_COM_CONF 0x01
+#define ARLAN_COM_RX_ENABLE 0x03
+#define ARLAN_COM_RX_ABORT 0x04
+#define ARLAN_COM_TX_ENABLE 0x05
+#define ARLAN_COM_TX_ABORT 0x06
+#define ARLAN_COM_NOP 0x07
+#define ARLAN_COM_STANDBY 0x08
+#define ARLAN_COM_ACTIVATE 0x09
+#define ARLAN_COM_GOTO_SLOW_POLL 0x0a
+#define ARLAN_COM_INT 0x80
+
+
+#define TXLAST(dev) (((struct arlan_private *)netdev_priv(dev))->txRing[((struct arlan_private *)netdev_priv(dev))->txLast])
+#define TXHEAD(dev) (((struct arlan_private *)netdev_priv(dev))->txRing[0])
+#define TXTAIL(dev) (((struct arlan_private *)netdev_priv(dev))->txRing[1])
+
+#define TXBuffStart(dev) offsetof(struct arlan_shmem, txBuffer)
+#define TXBuffEnd(dev) offsetof(struct arlan_shmem, xxBuffer)
+
+#define READSHM(to,from,atype) {\
+ atype tmp;\
+ memcpy_fromio(&(tmp),&(from),sizeof(atype));\
+ to = tmp;\
+ }
+
+#define READSHMEM(from,atype)\
+ atype from; \
+ READSHM(from, arlan->from, atype);
+
+#define WRITESHM(to,from,atype) \
+ { atype tmpSHM = from;\
+ memcpy_toio(&(to),&tmpSHM,sizeof(atype));\
+ }
+
+#define DEBUGSHM(levelSHM,stringSHM,stuff,atype) \
+ { atype tmpSHM; \
+ memcpy_fromio(&tmpSHM,&(stuff),sizeof(atype));\
+ IFDEBUG(levelSHM) printk(stringSHM,tmpSHM);\
+ }
+
+#define WRITESHMB(to, val) \
+ writeb(val,&(to))
+#define READSHMB(to) \
+ readb(&(to))
+#define WRITESHMS(to, val) \
+ writew(val,&(to))
+#define READSHMS(to) \
+ readw(&(to))
+#define WRITESHMI(to, val) \
+ writel(val,&(to))
+#define READSHMI(to) \
+ readl(&(to))
+
+
+
+
+
+#define registrationBad(dev)\
+ ( ( READSHMB(((struct arlan_private *)netdev_priv(dev))->card->registrationMode) > 0) && \
+ ( READSHMB(((struct arlan_private *)netdev_priv(dev))->card->registrationStatus) == 0) )
+
+
+#define readControlRegister(dev)\
+ READSHMB(((struct arlan_private *)netdev_priv(dev))->card->cntrlRegImage)
+
+#define writeControlRegister(dev, v){\
+ WRITESHMB(((struct arlan_private *)netdev_priv(dev))->card->cntrlRegImage ,((v) &0xF) );\
+ WRITESHMB(((struct arlan_private *)netdev_priv(dev))->card->controlRegister ,(v) );}
+
+
+#define arlan_interrupt_lancpu(dev) {\
+ int cr; \
+ \
+ cr = readControlRegister(dev);\
+ if (cr & ARLAN_CHANNEL_ATTENTION){ \
+ writeControlRegister(dev, (cr & ~ARLAN_CHANNEL_ATTENTION));\
+ }else \
+ writeControlRegister(dev, (cr | ARLAN_CHANNEL_ATTENTION));\
+}
+
+#define clearChannelAttention(dev){ \
+ writeControlRegister(dev,readControlRegister(dev) & ~ARLAN_CHANNEL_ATTENTION);}
+#define setHardwareReset(dev) {\
+ writeControlRegister(dev,readControlRegister(dev) | ARLAN_RESET);}
+#define clearHardwareReset(dev) {\
+ writeControlRegister(dev,readControlRegister(dev) & ~ARLAN_RESET);}
+#define setInterruptEnable(dev){\
+ writeControlRegister(dev,readControlRegister(dev) | ARLAN_INTERRUPT_ENABLE) ;}
+#define clearInterruptEnable(dev){\
+ writeControlRegister(dev,readControlRegister(dev) & ~ARLAN_INTERRUPT_ENABLE) ;}
+#define setClearInterrupt(dev){\
+ writeControlRegister(dev,readControlRegister(dev) | ARLAN_CLEAR_INTERRUPT) ;}
+#define clearClearInterrupt(dev){\
+ writeControlRegister(dev,readControlRegister(dev) & ~ARLAN_CLEAR_INTERRUPT);}
+#define setPowerOff(dev){\
+ writeControlRegister(dev,readControlRegister(dev) | (ARLAN_POWER && ARLAN_ACCESS));\
+ writeControlRegister(dev,readControlRegister(dev) & ~ARLAN_ACCESS);}
+#define setPowerOn(dev){\
+ writeControlRegister(dev,readControlRegister(dev) & ~(ARLAN_POWER)); }
+#define arlan_lock_card_access(dev){\
+ writeControlRegister(dev,readControlRegister(dev) & ~ARLAN_ACCESS);}
+#define arlan_unlock_card_access(dev){\
+ writeControlRegister(dev,readControlRegister(dev) | ARLAN_ACCESS ); }
+
+
+
+
+#define ARLAN_COMMAND_RX 0x000001
+#define ARLAN_COMMAND_NOOP 0x000002
+#define ARLAN_COMMAND_NOOPINT 0x000004
+#define ARLAN_COMMAND_TX 0x000008
+#define ARLAN_COMMAND_CONF 0x000010
+#define ARLAN_COMMAND_RESET 0x000020
+#define ARLAN_COMMAND_TX_ABORT 0x000040
+#define ARLAN_COMMAND_RX_ABORT 0x000080
+#define ARLAN_COMMAND_POWERDOWN 0x000100
+#define ARLAN_COMMAND_POWERUP 0x000200
+#define ARLAN_COMMAND_SLOW_POLL 0x000400
+#define ARLAN_COMMAND_ACTIVATE 0x000800
+#define ARLAN_COMMAND_INT_ACK 0x001000
+#define ARLAN_COMMAND_INT_ENABLE 0x002000
+#define ARLAN_COMMAND_WAIT_NOW 0x004000
+#define ARLAN_COMMAND_LONG_WAIT_NOW 0x008000
+#define ARLAN_COMMAND_STANDBY 0x010000
+#define ARLAN_COMMAND_INT_RACK 0x020000
+#define ARLAN_COMMAND_INT_RENABLE 0x040000
+#define ARLAN_COMMAND_CONF_WAIT 0x080000
+#define ARLAN_COMMAND_TBUSY_CLEAR 0x100000
+#define ARLAN_COMMAND_CLEAN_AND_CONF (ARLAN_COMMAND_TX_ABORT\
+ | ARLAN_COMMAND_RX_ABORT\
+ | ARLAN_COMMAND_CONF)
+#define ARLAN_COMMAND_CLEAN_AND_RESET (ARLAN_COMMAND_TX_ABORT\
+ | ARLAN_COMMAND_RX_ABORT\
+ | ARLAN_COMMAND_RESET)
+
+
+
+#define ARLAN_DEBUG_CHAIN_LOCKS 0x00001
+#define ARLAN_DEBUG_RESET 0x00002
+#define ARLAN_DEBUG_TIMING 0x00004
+#define ARLAN_DEBUG_CARD_STATE 0x00008
+#define ARLAN_DEBUG_TX_CHAIN 0x00010
+#define ARLAN_DEBUG_MULTICAST 0x00020
+#define ARLAN_DEBUG_HEADER_DUMP 0x00040
+#define ARLAN_DEBUG_INTERRUPT 0x00080
+#define ARLAN_DEBUG_STARTUP 0x00100
+#define ARLAN_DEBUG_SHUTDOWN 0x00200
+
diff --git a/drivers/net/wireless/atmel.c b/drivers/net/wireless/atmel.c
new file mode 100644
index 0000000..18a7d38
--- /dev/null
+++ b/drivers/net/wireless/atmel.c
@@ -0,0 +1,4272 @@
+/*** -*- linux-c -*- **********************************************************
+
+ Driver for Atmel at76c502 at76c504 and at76c506 wireless cards.
+
+ Copyright 2000-2001 ATMEL Corporation.
+ Copyright 2003-2004 Simon Kelley.
+
+ This code was developed from version 2.1.1 of the Atmel drivers,
+ released by Atmel corp. under the GPL in December 2002. It also
+ includes code from the Linux aironet drivers (C) Benjamin Reed,
+ and the Linux PCMCIA package, (C) David Hinds and the Linux wireless
+ extensions, (C) Jean Tourrilhes.
+
+ The firmware module for reading the MAC address of the card comes from
+ net.russotto.AtmelMACFW, written by Matthew T. Russotto and copyright
+ by him. net.russotto.AtmelMACFW is used under the GPL license version 2.
+ This file contains the module in binary form and, under the terms
+ of the GPL, in source form. The source is located at the end of the file.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This software is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with Atmel wireless lan drivers; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+
+ For all queries about this code, please contact the current author,
+ Simon Kelley <simon@thekelleys.org.uk> and not Atmel Corporation.
+
+ Credit is due to HP UK and Cambridge Online Systems Ltd for supplying
+ hardware used during development of this driver.
+
+******************************************************************************/
+
+#include <linux/config.h>
+#include <linux/init.h>
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/ctype.h>
+#include <linux/timer.h>
+#include <asm/io.h>
+#include <asm/system.h>
+#include <asm/uaccess.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/if_arp.h>
+#include <linux/ioport.h>
+#include <linux/fcntl.h>
+#include <linux/delay.h>
+#include <linux/wireless.h>
+#include <net/iw_handler.h>
+#include <linux/byteorder/generic.h>
+#include <linux/crc32.h>
+#include <linux/proc_fs.h>
+#include <linux/device.h>
+#include <linux/moduleparam.h>
+#include <linux/firmware.h>
+#include "ieee802_11.h"
+#include "atmel.h"
+
+#define DRIVER_MAJOR 0
+#define DRIVER_MINOR 96
+
+MODULE_AUTHOR("Simon Kelley");
+MODULE_DESCRIPTION("Support for Atmel at76c50x 802.11 wireless ethernet cards.");
+MODULE_LICENSE("GPL");
+MODULE_SUPPORTED_DEVICE("Atmel at76c50x wireless cards");
+
+/* The name of the firmware file to be loaded
+ over-rides any automatic selection */
+static char *firmware = NULL;
+module_param(firmware, charp, 0);
+
+/* table of firmware file names */
+static struct {
+ AtmelFWType fw_type;
+ const char *fw_file;
+ const char *fw_file_ext;
+} fw_table[] = {
+ { ATMEL_FW_TYPE_502, "atmel_at76c502", "bin" },
+ { ATMEL_FW_TYPE_502D, "atmel_at76c502d", "bin" },
+ { ATMEL_FW_TYPE_502E, "atmel_at76c502e", "bin" },
+ { ATMEL_FW_TYPE_502_3COM, "atmel_at76c502_3com", "bin" },
+ { ATMEL_FW_TYPE_504, "atmel_at76c504", "bin" },
+ { ATMEL_FW_TYPE_504_2958, "atmel_at76c504_2958", "bin" },
+ { ATMEL_FW_TYPE_504A_2958,"atmel_at76c504a_2958","bin" },
+ { ATMEL_FW_TYPE_506, "atmel_at76c506", "bin" },
+ { ATMEL_FW_TYPE_NONE, NULL, NULL }
+};
+
+#define MAX_SSID_LENGTH 32
+#define MGMT_JIFFIES (256 * HZ / 100)
+
+#define MAX_BSS_ENTRIES 64
+
+/* registers */
+#define GCR 0x00 // (SIR0) General Configuration Register
+#define BSR 0x02 // (SIR1) Bank Switching Select Register
+#define AR 0x04
+#define DR 0x08
+#define MR1 0x12 // Mirror Register 1
+#define MR2 0x14 // Mirror Register 2
+#define MR3 0x16 // Mirror Register 3
+#define MR4 0x18 // Mirror Register 4
+
+#define GPR1 0x0c
+#define GPR2 0x0e
+#define GPR3 0x10
+//
+// Constants for the GCR register.
+//
+#define GCR_REMAP 0x0400 // Remap internal SRAM to 0
+#define GCR_SWRES 0x0080 // BIU reset (ARM and PAI are NOT reset)
+#define GCR_CORES 0x0060 // Core Reset (ARM and PAI are reset)
+#define GCR_ENINT 0x0002 // Enable Interrupts
+#define GCR_ACKINT 0x0008 // Acknowledge Interrupts
+
+#define BSS_SRAM 0x0200 // AMBA module selection --> SRAM
+#define BSS_IRAM 0x0100 // AMBA module selection --> IRAM
+//
+// Constants for the MR registers.
+//
+#define MAC_INIT_COMPLETE 0x0001 // MAC init has been completed
+#define MAC_BOOT_COMPLETE 0x0010 // MAC boot has been completed
+#define MAC_INIT_OK 0x0002 // MAC boot has been completed
+
+#define C80211_SUBTYPE_MGMT_ASS_REQUEST 0x00
+#define C80211_SUBTYPE_MGMT_ASS_RESPONSE 0x10
+#define C80211_SUBTYPE_MGMT_REASS_REQUEST 0x20
+#define C80211_SUBTYPE_MGMT_REASS_RESPONSE 0x30
+#define C80211_SUBTYPE_MGMT_ProbeRequest 0x40
+#define C80211_SUBTYPE_MGMT_ProbeResponse 0x50
+#define C80211_SUBTYPE_MGMT_BEACON 0x80
+#define C80211_SUBTYPE_MGMT_ATIM 0x90
+#define C80211_SUBTYPE_MGMT_DISASSOSIATION 0xA0
+#define C80211_SUBTYPE_MGMT_Authentication 0xB0
+#define C80211_SUBTYPE_MGMT_Deauthentication 0xC0
+
+#define C80211_MGMT_AAN_OPENSYSTEM 0x0000
+#define C80211_MGMT_AAN_SHAREDKEY 0x0001
+
+#define C80211_MGMT_CAPABILITY_ESS 0x0001 // see 802.11 p.58
+#define C80211_MGMT_CAPABILITY_IBSS 0x0002 // - " -
+#define C80211_MGMT_CAPABILITY_CFPollable 0x0004 // - " -
+#define C80211_MGMT_CAPABILITY_CFPollRequest 0x0008 // - " -
+#define C80211_MGMT_CAPABILITY_Privacy 0x0010 // - " -
+
+#define C80211_MGMT_SC_Success 0
+#define C80211_MGMT_SC_Unspecified 1
+#define C80211_MGMT_SC_SupportCapabilities 10
+#define C80211_MGMT_SC_ReassDenied 11
+#define C80211_MGMT_SC_AssDenied 12
+#define C80211_MGMT_SC_AuthAlgNotSupported 13
+#define C80211_MGMT_SC_AuthTransSeqNumError 14
+#define C80211_MGMT_SC_AuthRejectChallenge 15
+#define C80211_MGMT_SC_AuthRejectTimeout 16
+#define C80211_MGMT_SC_AssDeniedHandleAP 17
+#define C80211_MGMT_SC_AssDeniedBSSRate 18
+
+#define C80211_MGMT_ElementID_SSID 0
+#define C80211_MGMT_ElementID_SupportedRates 1
+#define C80211_MGMT_ElementID_ChallengeText 16
+#define C80211_MGMT_CAPABILITY_ShortPreamble 0x0020
+
+#define MIB_MAX_DATA_BYTES 212
+#define MIB_HEADER_SIZE 4 /* first four fields */
+
+struct get_set_mib {
+ u8 type;
+ u8 size;
+ u8 index;
+ u8 reserved;
+ u8 data[MIB_MAX_DATA_BYTES];
+};
+
+struct rx_desc {
+ u32 Next;
+ u16 MsduPos;
+ u16 MsduSize;
+
+ u8 State;
+ u8 Status;
+ u8 Rate;
+ u8 Rssi;
+ u8 LinkQuality;
+ u8 PreambleType;
+ u16 Duration;
+ u32 RxTime;
+
+};
+
+#define RX_DESC_FLAG_VALID 0x80
+#define RX_DESC_FLAG_CONSUMED 0x40
+#define RX_DESC_FLAG_IDLE 0x00
+
+#define RX_STATUS_SUCCESS 0x00
+
+#define RX_DESC_MSDU_POS_OFFSET 4
+#define RX_DESC_MSDU_SIZE_OFFSET 6
+#define RX_DESC_FLAGS_OFFSET 8
+#define RX_DESC_STATUS_OFFSET 9
+#define RX_DESC_RSSI_OFFSET 11
+#define RX_DESC_LINK_QUALITY_OFFSET 12
+#define RX_DESC_PREAMBLE_TYPE_OFFSET 13
+#define RX_DESC_DURATION_OFFSET 14
+#define RX_DESC_RX_TIME_OFFSET 16
+
+
+struct tx_desc {
+ u32 NextDescriptor;
+ u16 TxStartOfFrame;
+ u16 TxLength;
+
+ u8 TxState;
+ u8 TxStatus;
+ u8 RetryCount;
+
+ u8 TxRate;
+
+ u8 KeyIndex;
+ u8 ChiperType;
+ u8 ChipreLength;
+ u8 Reserved1;
+
+ u8 Reserved;
+ u8 PacketType;
+ u16 HostTxLength;
+
+};
+
+
+#define TX_DESC_NEXT_OFFSET 0
+#define TX_DESC_POS_OFFSET 4
+#define TX_DESC_SIZE_OFFSET 6
+#define TX_DESC_FLAGS_OFFSET 8
+#define TX_DESC_STATUS_OFFSET 9
+#define TX_DESC_RETRY_OFFSET 10
+#define TX_DESC_RATE_OFFSET 11
+#define TX_DESC_KEY_INDEX_OFFSET 12
+#define TX_DESC_CIPHER_TYPE_OFFSET 13
+#define TX_DESC_CIPHER_LENGTH_OFFSET 14
+#define TX_DESC_PACKET_TYPE_OFFSET 17
+#define TX_DESC_HOST_LENGTH_OFFSET 18
+
+
+
+///////////////////////////////////////////////////////
+// Host-MAC interface
+///////////////////////////////////////////////////////
+
+#define TX_STATUS_SUCCESS 0x00
+
+#define TX_FIRM_OWN 0x80
+#define TX_DONE 0x40
+
+
+#define TX_ERROR 0x01
+
+#define TX_PACKET_TYPE_DATA 0x01
+#define TX_PACKET_TYPE_MGMT 0x02
+
+#define ISR_EMPTY 0x00 // no bits set in ISR
+#define ISR_TxCOMPLETE 0x01 // packet transmitted
+#define ISR_RxCOMPLETE 0x02 // packet received
+#define ISR_RxFRAMELOST 0x04 // Rx Frame lost
+#define ISR_FATAL_ERROR 0x08 // Fatal error
+#define ISR_COMMAND_COMPLETE 0x10 // command completed
+#define ISR_OUT_OF_RANGE 0x20 // command completed
+#define ISR_IBSS_MERGE 0x40 // (4.1.2.30): IBSS merge
+#define ISR_GENERIC_IRQ 0x80
+
+
+#define Local_Mib_Type 0x01
+#define Mac_Address_Mib_Type 0x02
+#define Mac_Mib_Type 0x03
+#define Statistics_Mib_Type 0x04
+#define Mac_Mgmt_Mib_Type 0x05
+#define Mac_Wep_Mib_Type 0x06
+#define Phy_Mib_Type 0x07
+#define Multi_Domain_MIB 0x08
+
+#define MAC_MGMT_MIB_CUR_BSSID_POS 14
+#define MAC_MIB_FRAG_THRESHOLD_POS 8
+#define MAC_MIB_RTS_THRESHOLD_POS 10
+#define MAC_MIB_SHORT_RETRY_POS 16
+#define MAC_MIB_LONG_RETRY_POS 17
+#define MAC_MIB_SHORT_RETRY_LIMIT_POS 16
+#define MAC_MGMT_MIB_BEACON_PER_POS 0
+#define MAC_MGMT_MIB_STATION_ID_POS 6
+#define MAC_MGMT_MIB_CUR_PRIVACY_POS 11
+#define MAC_MGMT_MIB_CUR_BSSID_POS 14
+#define MAC_MGMT_MIB_PS_MODE_POS 53
+#define MAC_MGMT_MIB_LISTEN_INTERVAL_POS 54
+#define MAC_MGMT_MIB_MULTI_DOMAIN_IMPLEMENTED 56
+#define MAC_MGMT_MIB_MULTI_DOMAIN_ENABLED 57
+#define PHY_MIB_CHANNEL_POS 14
+#define PHY_MIB_RATE_SET_POS 20
+#define PHY_MIB_REG_DOMAIN_POS 26
+#define LOCAL_MIB_AUTO_TX_RATE_POS 3
+#define LOCAL_MIB_SSID_SIZE 5
+#define LOCAL_MIB_TX_PROMISCUOUS_POS 6
+#define LOCAL_MIB_TX_MGMT_RATE_POS 7
+#define LOCAL_MIB_TX_CONTROL_RATE_POS 8
+#define LOCAL_MIB_PREAMBLE_TYPE 9
+#define MAC_ADDR_MIB_MAC_ADDR_POS 0
+
+
+#define CMD_Set_MIB_Vars 0x01
+#define CMD_Get_MIB_Vars 0x02
+#define CMD_Scan 0x03
+#define CMD_Join 0x04
+#define CMD_Start 0x05
+#define CMD_EnableRadio 0x06
+#define CMD_DisableRadio 0x07
+#define CMD_SiteSurvey 0x0B
+
+#define CMD_STATUS_IDLE 0x00
+#define CMD_STATUS_COMPLETE 0x01
+#define CMD_STATUS_UNKNOWN 0x02
+#define CMD_STATUS_INVALID_PARAMETER 0x03
+#define CMD_STATUS_FUNCTION_NOT_SUPPORTED 0x04
+#define CMD_STATUS_TIME_OUT 0x07
+#define CMD_STATUS_IN_PROGRESS 0x08
+#define CMD_STATUS_REJECTED_RADIO_OFF 0x09
+#define CMD_STATUS_HOST_ERROR 0xFF
+#define CMD_STATUS_BUSY 0xFE
+
+
+#define CMD_BLOCK_COMMAND_OFFSET 0
+#define CMD_BLOCK_STATUS_OFFSET 1
+#define CMD_BLOCK_PARAMETERS_OFFSET 4
+
+#define SCAN_OPTIONS_SITE_SURVEY 0x80
+
+#define MGMT_FRAME_BODY_OFFSET 24
+#define MAX_AUTHENTICATION_RETRIES 3
+#define MAX_ASSOCIATION_RETRIES 3
+
+#define AUTHENTICATION_RESPONSE_TIME_OUT 1000
+
+#define MAX_WIRELESS_BODY 2316 /* mtu is 2312, CRC is 4 */
+#define LOOP_RETRY_LIMIT 500000
+
+#define ACTIVE_MODE 1
+#define PS_MODE 2
+
+#define MAX_ENCRYPTION_KEYS 4
+#define MAX_ENCRYPTION_KEY_SIZE 40
+
+///////////////////////////////////////////////////////////////////////////
+// 802.11 related definitions
+///////////////////////////////////////////////////////////////////////////
+
+//
+// Regulatory Domains
+//
+
+#define REG_DOMAIN_FCC 0x10 //Channels 1-11 USA
+#define REG_DOMAIN_DOC 0x20 //Channel 1-11 Canada
+#define REG_DOMAIN_ETSI 0x30 //Channel 1-13 Europe (ex Spain/France)
+#define REG_DOMAIN_SPAIN 0x31 //Channel 10-11 Spain
+#define REG_DOMAIN_FRANCE 0x32 //Channel 10-13 France
+#define REG_DOMAIN_MKK 0x40 //Channel 14 Japan
+#define REG_DOMAIN_MKK1 0x41 //Channel 1-14 Japan(MKK1)
+#define REG_DOMAIN_ISRAEL 0x50 //Channel 3-9 ISRAEL
+
+#define BSS_TYPE_AD_HOC 1
+#define BSS_TYPE_INFRASTRUCTURE 2
+
+#define SCAN_TYPE_ACTIVE 0
+#define SCAN_TYPE_PASSIVE 1
+
+#define LONG_PREAMBLE 0
+#define SHORT_PREAMBLE 1
+#define AUTO_PREAMBLE 2
+
+#define DATA_FRAME_WS_HEADER_SIZE 30
+
+/* promiscuous mode control */
+#define PROM_MODE_OFF 0x0
+#define PROM_MODE_UNKNOWN 0x1
+#define PROM_MODE_CRC_FAILED 0x2
+#define PROM_MODE_DUPLICATED 0x4
+#define PROM_MODE_MGMT 0x8
+#define PROM_MODE_CTRL 0x10
+#define PROM_MODE_BAD_PROTOCOL 0x20
+
+
+#define IFACE_INT_STATUS_OFFSET 0
+#define IFACE_INT_MASK_OFFSET 1
+#define IFACE_LOCKOUT_HOST_OFFSET 2
+#define IFACE_LOCKOUT_MAC_OFFSET 3
+#define IFACE_FUNC_CTRL_OFFSET 28
+#define IFACE_MAC_STAT_OFFSET 30
+#define IFACE_GENERIC_INT_TYPE_OFFSET 32
+
+#define CIPHER_SUITE_NONE 0
+#define CIPHER_SUITE_WEP_64 1
+#define CIPHER_SUITE_TKIP 2
+#define CIPHER_SUITE_AES 3
+#define CIPHER_SUITE_CCX 4
+#define CIPHER_SUITE_WEP_128 5
+
+//
+// IFACE MACROS & definitions
+//
+//
+
+// FuncCtrl field:
+//
+#define FUNC_CTRL_TxENABLE 0x10
+#define FUNC_CTRL_RxENABLE 0x20
+#define FUNC_CTRL_INIT_COMPLETE 0x01
+
+/* A stub firmware image which reads the MAC address from NVRAM on the card.
+ For copyright information and source see the end of this file. */
+static u8 mac_reader[] = {
+ 0x06,0x00,0x00,0xea,0x04,0x00,0x00,0xea,0x03,0x00,0x00,0xea,0x02,0x00,0x00,0xea,
+ 0x01,0x00,0x00,0xea,0x00,0x00,0x00,0xea,0xff,0xff,0xff,0xea,0xfe,0xff,0xff,0xea,
+ 0xd3,0x00,0xa0,0xe3,0x00,0xf0,0x21,0xe1,0x0e,0x04,0xa0,0xe3,0x00,0x10,0xa0,0xe3,
+ 0x81,0x11,0xa0,0xe1,0x00,0x10,0x81,0xe3,0x00,0x10,0x80,0xe5,0x1c,0x10,0x90,0xe5,
+ 0x10,0x10,0xc1,0xe3,0x1c,0x10,0x80,0xe5,0x01,0x10,0xa0,0xe3,0x08,0x10,0x80,0xe5,
+ 0x02,0x03,0xa0,0xe3,0x00,0x10,0xa0,0xe3,0xb0,0x10,0xc0,0xe1,0xb4,0x10,0xc0,0xe1,
+ 0xb8,0x10,0xc0,0xe1,0xbc,0x10,0xc0,0xe1,0x56,0xdc,0xa0,0xe3,0x21,0x00,0x00,0xeb,
+ 0x0a,0x00,0xa0,0xe3,0x1a,0x00,0x00,0xeb,0x10,0x00,0x00,0xeb,0x07,0x00,0x00,0xeb,
+ 0x02,0x03,0xa0,0xe3,0x02,0x14,0xa0,0xe3,0xb4,0x10,0xc0,0xe1,0x4c,0x10,0x9f,0xe5,
+ 0xbc,0x10,0xc0,0xe1,0x10,0x10,0xa0,0xe3,0xb8,0x10,0xc0,0xe1,0xfe,0xff,0xff,0xea,
+ 0x00,0x40,0x2d,0xe9,0x00,0x20,0xa0,0xe3,0x02,0x3c,0xa0,0xe3,0x00,0x10,0xa0,0xe3,
+ 0x28,0x00,0x9f,0xe5,0x37,0x00,0x00,0xeb,0x00,0x40,0xbd,0xe8,0x1e,0xff,0x2f,0xe1,
+ 0x00,0x40,0x2d,0xe9,0x12,0x2e,0xa0,0xe3,0x06,0x30,0xa0,0xe3,0x00,0x10,0xa0,0xe3,
+ 0x02,0x04,0xa0,0xe3,0x2f,0x00,0x00,0xeb,0x00,0x40,0xbd,0xe8,0x1e,0xff,0x2f,0xe1,
+ 0x00,0x02,0x00,0x02,0x80,0x01,0x90,0xe0,0x01,0x00,0x00,0x0a,0x01,0x00,0x50,0xe2,
+ 0xfc,0xff,0xff,0xea,0x1e,0xff,0x2f,0xe1,0x80,0x10,0xa0,0xe3,0xf3,0x06,0xa0,0xe3,
+ 0x00,0x10,0x80,0xe5,0x00,0x10,0xa0,0xe3,0x00,0x10,0x80,0xe5,0x01,0x10,0xa0,0xe3,
+ 0x04,0x10,0x80,0xe5,0x00,0x10,0x80,0xe5,0x0e,0x34,0xa0,0xe3,0x1c,0x10,0x93,0xe5,
+ 0x02,0x1a,0x81,0xe3,0x1c,0x10,0x83,0xe5,0x58,0x11,0x9f,0xe5,0x30,0x10,0x80,0xe5,
+ 0x54,0x11,0x9f,0xe5,0x34,0x10,0x80,0xe5,0x38,0x10,0x80,0xe5,0x3c,0x10,0x80,0xe5,
+ 0x10,0x10,0x90,0xe5,0x08,0x00,0x90,0xe5,0x1e,0xff,0x2f,0xe1,0xf3,0x16,0xa0,0xe3,
+ 0x08,0x00,0x91,0xe5,0x05,0x00,0xa0,0xe3,0x0c,0x00,0x81,0xe5,0x10,0x00,0x91,0xe5,
+ 0x02,0x00,0x10,0xe3,0xfc,0xff,0xff,0x0a,0xff,0x00,0xa0,0xe3,0x0c,0x00,0x81,0xe5,
+ 0x10,0x00,0x91,0xe5,0x02,0x00,0x10,0xe3,0xfc,0xff,0xff,0x0a,0x08,0x00,0x91,0xe5,
+ 0x10,0x00,0x91,0xe5,0x01,0x00,0x10,0xe3,0xfc,0xff,0xff,0x0a,0x08,0x00,0x91,0xe5,
+ 0xff,0x00,0x00,0xe2,0x1e,0xff,0x2f,0xe1,0x30,0x40,0x2d,0xe9,0x00,0x50,0xa0,0xe1,
+ 0x03,0x40,0xa0,0xe1,0xa2,0x02,0xa0,0xe1,0x08,0x00,0x00,0xe2,0x03,0x00,0x80,0xe2,
+ 0xd8,0x10,0x9f,0xe5,0x00,0x00,0xc1,0xe5,0x01,0x20,0xc1,0xe5,0xe2,0xff,0xff,0xeb,
+ 0x01,0x00,0x10,0xe3,0xfc,0xff,0xff,0x1a,0x14,0x00,0xa0,0xe3,0xc4,0xff,0xff,0xeb,
+ 0x04,0x20,0xa0,0xe1,0x05,0x10,0xa0,0xe1,0x02,0x00,0xa0,0xe3,0x01,0x00,0x00,0xeb,
+ 0x30,0x40,0xbd,0xe8,0x1e,0xff,0x2f,0xe1,0x70,0x40,0x2d,0xe9,0xf3,0x46,0xa0,0xe3,
+ 0x00,0x30,0xa0,0xe3,0x00,0x00,0x50,0xe3,0x08,0x00,0x00,0x9a,0x8c,0x50,0x9f,0xe5,
+ 0x03,0x60,0xd5,0xe7,0x0c,0x60,0x84,0xe5,0x10,0x60,0x94,0xe5,0x02,0x00,0x16,0xe3,
+ 0xfc,0xff,0xff,0x0a,0x01,0x30,0x83,0xe2,0x00,0x00,0x53,0xe1,0xf7,0xff,0xff,0x3a,
+ 0xff,0x30,0xa0,0xe3,0x0c,0x30,0x84,0xe5,0x08,0x00,0x94,0xe5,0x10,0x00,0x94,0xe5,
+ 0x01,0x00,0x10,0xe3,0xfc,0xff,0xff,0x0a,0x08,0x00,0x94,0xe5,0x00,0x00,0xa0,0xe3,
+ 0x00,0x00,0x52,0xe3,0x0b,0x00,0x00,0x9a,0x10,0x50,0x94,0xe5,0x02,0x00,0x15,0xe3,
+ 0xfc,0xff,0xff,0x0a,0x0c,0x30,0x84,0xe5,0x10,0x50,0x94,0xe5,0x01,0x00,0x15,0xe3,
+ 0xfc,0xff,0xff,0x0a,0x08,0x50,0x94,0xe5,0x01,0x50,0xc1,0xe4,0x01,0x00,0x80,0xe2,
+ 0x02,0x00,0x50,0xe1,0xf3,0xff,0xff,0x3a,0xc8,0x00,0xa0,0xe3,0x98,0xff,0xff,0xeb,
+ 0x70,0x40,0xbd,0xe8,0x1e,0xff,0x2f,0xe1,0x01,0x0c,0x00,0x02,0x01,0x02,0x00,0x02,
+ 0x00,0x01,0x00,0x02
+};
+
+struct atmel_private {
+ void *card; /* Bus dependent stucture varies for PCcard */
+ int (*present_callback)(void *); /* And callback which uses it */
+ char firmware_id[32];
+ AtmelFWType firmware_type;
+ u8 *firmware;
+ int firmware_length;
+ struct timer_list management_timer;
+ struct net_device *dev;
+ struct device *sys_dev;
+ struct iw_statistics wstats;
+ struct net_device_stats stats; // device stats
+ spinlock_t irqlock, timerlock; // spinlocks
+ enum { BUS_TYPE_PCCARD, BUS_TYPE_PCI } bus_type;
+ enum {
+ CARD_TYPE_PARALLEL_FLASH,
+ CARD_TYPE_SPI_FLASH,
+ CARD_TYPE_EEPROM
+ } card_type;
+ int do_rx_crc; /* If we need to CRC incoming packets */
+ int probe_crc; /* set if we don't yet know */
+ int crc_ok_cnt, crc_ko_cnt; /* counters for probing */
+ u16 rx_desc_head;
+ u16 tx_desc_free, tx_desc_head, tx_desc_tail, tx_desc_previous;
+ u16 tx_free_mem, tx_buff_head, tx_buff_tail;
+
+ u16 frag_seq, frag_len, frag_no;
+ u8 frag_source[6];
+
+ u8 wep_is_on, default_key, exclude_unencrypted, encryption_level;
+ u8 group_cipher_suite, pairwise_cipher_suite;
+ u8 wep_keys[MAX_ENCRYPTION_KEYS][MAX_ENCRYPTION_KEY_SIZE];
+ int wep_key_len[MAX_ENCRYPTION_KEYS];
+ int use_wpa, radio_on_broken; /* firmware dependent stuff. */
+
+ u16 host_info_base;
+ struct host_info_struct {
+ /* NB this is matched to the hardware, don't change. */
+ u8 volatile int_status;
+ u8 volatile int_mask;
+ u8 volatile lockout_host;
+ u8 volatile lockout_mac;
+
+ u16 tx_buff_pos;
+ u16 tx_buff_size;
+ u16 tx_desc_pos;
+ u16 tx_desc_count;
+
+ u16 rx_buff_pos;
+ u16 rx_buff_size;
+ u16 rx_desc_pos;
+ u16 rx_desc_count;
+
+ u16 build_version;
+ u16 command_pos;
+
+ u16 major_version;
+ u16 minor_version;
+
+ u16 func_ctrl;
+ u16 mac_status;
+ u16 generic_IRQ_type;
+ u8 reserved[2];
+ } host_info;
+
+ enum {
+ STATION_STATE_SCANNING,
+ STATION_STATE_JOINNING,
+ STATION_STATE_AUTHENTICATING,
+ STATION_STATE_ASSOCIATING,
+ STATION_STATE_READY,
+ STATION_STATE_REASSOCIATING,
+ STATION_STATE_DOWN,
+ STATION_STATE_MGMT_ERROR
+ } station_state;
+
+ int operating_mode, power_mode;
+ time_t last_qual;
+ int beacons_this_sec;
+ int channel;
+ int reg_domain, config_reg_domain;
+ int tx_rate;
+ int auto_tx_rate;
+ int rts_threshold;
+ int frag_threshold;
+ int long_retry, short_retry;
+ int preamble;
+ int default_beacon_period, beacon_period, listen_interval;
+ int CurrentAuthentTransactionSeqNum, ExpectedAuthentTransactionSeqNum;
+ int AuthenticationRequestRetryCnt, AssociationRequestRetryCnt, ReAssociationRequestRetryCnt;
+ enum {
+ SITE_SURVEY_IDLE,
+ SITE_SURVEY_IN_PROGRESS,
+ SITE_SURVEY_COMPLETED
+ } site_survey_state;
+ time_t last_survey;
+
+ int station_was_associated, station_is_associated;
+ int fast_scan;
+
+ struct bss_info {
+ int channel;
+ int SSIDsize;
+ int RSSI;
+ int UsingWEP;
+ int preamble;
+ int beacon_period;
+ int BSStype;
+ u8 BSSID[6];
+ u8 SSID[MAX_SSID_LENGTH];
+ } BSSinfo[MAX_BSS_ENTRIES];
+ int BSS_list_entries, current_BSS;
+ int connect_to_any_BSS;
+ int SSID_size, new_SSID_size;
+ u8 CurrentBSSID[6], BSSID[6];
+ u8 SSID[MAX_SSID_LENGTH], new_SSID[MAX_SSID_LENGTH];
+ u64 last_beacon_timestamp;
+ u8 rx_buf[MAX_WIRELESS_BODY];
+
+};
+
+static u8 atmel_basic_rates[4] = {0x82,0x84,0x0b,0x16};
+
+static const struct {
+ int reg_domain;
+ int min, max;
+ char *name;
+} channel_table[] = { { REG_DOMAIN_FCC, 1, 11, "USA" },
+ { REG_DOMAIN_DOC, 1, 11, "Canada" },
+ { REG_DOMAIN_ETSI, 1, 13, "Europe" },
+ { REG_DOMAIN_SPAIN, 10, 11, "Spain" },
+ { REG_DOMAIN_FRANCE, 10, 13, "France" },
+ { REG_DOMAIN_MKK, 14, 14, "MKK" },
+ { REG_DOMAIN_MKK1, 1, 14, "MKK1" },
+ { REG_DOMAIN_ISRAEL, 3, 9, "Israel"} };
+
+static void build_wpa_mib(struct atmel_private *priv);
+static int atmel_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
+static void atmel_copy_to_card(struct net_device *dev, u16 dest, unsigned char *src, u16 len);
+static void atmel_copy_to_host(struct net_device *dev, unsigned char *dest, u16 src, u16 len);
+static void atmel_set_gcr(struct net_device *dev, u16 mask);
+static void atmel_clear_gcr(struct net_device *dev, u16 mask);
+static int atmel_lock_mac(struct atmel_private *priv);
+static void atmel_wmem32(struct atmel_private *priv, u16 pos, u32 data);
+static void atmel_command_irq(struct atmel_private *priv);
+static int atmel_validate_channel(struct atmel_private *priv, int channel);
+static void atmel_management_frame(struct atmel_private *priv, struct ieee802_11_hdr *header,
+ u16 frame_len, u8 rssi);
+static void atmel_management_timer(u_long a);
+static void atmel_send_command(struct atmel_private *priv, int command, void *cmd, int cmd_size);
+static int atmel_send_command_wait(struct atmel_private *priv, int command, void *cmd, int cmd_size);
+static void atmel_transmit_management_frame(struct atmel_private *priv, struct ieee802_11_hdr *header,
+ u8 *body, int body_len);
+
+static u8 atmel_get_mib8(struct atmel_private *priv, u8 type, u8 index);
+static void atmel_set_mib8(struct atmel_private *priv, u8 type, u8 index, u8 data);
+static void atmel_set_mib16(struct atmel_private *priv, u8 type, u8 index, u16 data);
+static void atmel_set_mib(struct atmel_private *priv, u8 type, u8 index, u8 *data, int data_len);
+static void atmel_get_mib(struct atmel_private *priv, u8 type, u8 index, u8 *data, int data_len);
+static void atmel_scan(struct atmel_private *priv, int specific_ssid);
+static void atmel_join_bss(struct atmel_private *priv, int bss_index);
+static void atmel_smooth_qual(struct atmel_private *priv);
+static void atmel_writeAR(struct net_device *dev, u16 data);
+static int probe_atmel_card(struct net_device *dev);
+static int reset_atmel_card(struct net_device *dev );
+static void atmel_enter_state(struct atmel_private *priv, int new_state);
+int atmel_open (struct net_device *dev);
+
+static inline u16 atmel_hi(struct atmel_private *priv, u16 offset)
+{
+ return priv->host_info_base + offset;
+}
+
+static inline u16 atmel_co(struct atmel_private *priv, u16 offset)
+{
+ return priv->host_info.command_pos + offset;
+}
+
+static inline u16 atmel_rx(struct atmel_private *priv, u16 offset, u16 desc)
+{
+ return priv->host_info.rx_desc_pos + (sizeof(struct rx_desc) * desc) + offset;
+}
+
+static inline u16 atmel_tx(struct atmel_private *priv, u16 offset, u16 desc)
+{
+ return priv->host_info.tx_desc_pos + (sizeof(struct tx_desc) * desc) + offset;
+}
+
+static inline u8 atmel_read8(struct net_device *dev, u16 offset)
+{
+ return inb(dev->base_addr + offset);
+}
+
+static inline void atmel_write8(struct net_device *dev, u16 offset, u8 data)
+{
+ outb(data, dev->base_addr + offset);
+}
+
+static inline u16 atmel_read16(struct net_device *dev, u16 offset)
+{
+ return inw(dev->base_addr + offset);
+}
+
+static inline void atmel_write16(struct net_device *dev, u16 offset, u16 data)
+{
+ outw(data, dev->base_addr + offset);
+}
+
+static inline u8 atmel_rmem8(struct atmel_private *priv, u16 pos)
+{
+ atmel_writeAR(priv->dev, pos);
+ return atmel_read8(priv->dev, DR);
+}
+
+static inline void atmel_wmem8(struct atmel_private *priv, u16 pos, u16 data)
+{
+ atmel_writeAR(priv->dev, pos);
+ atmel_write8(priv->dev, DR, data);
+}
+
+static inline u16 atmel_rmem16(struct atmel_private *priv, u16 pos)
+{
+ atmel_writeAR(priv->dev, pos);
+ return atmel_read16(priv->dev, DR);
+}
+
+static inline void atmel_wmem16(struct atmel_private *priv, u16 pos, u16 data)
+{
+ atmel_writeAR(priv->dev, pos);
+ atmel_write16(priv->dev, DR, data);
+}
+
+static const struct iw_handler_def atmel_handler_def;
+
+static void tx_done_irq(struct atmel_private *priv)
+{
+ int i;
+
+ for (i = 0;
+ atmel_rmem8(priv, atmel_tx(priv, TX_DESC_FLAGS_OFFSET, priv->tx_desc_head)) == TX_DONE &&
+ i < priv->host_info.tx_desc_count;
+ i++) {
+
+ u8 status = atmel_rmem8(priv, atmel_tx(priv, TX_DESC_STATUS_OFFSET, priv->tx_desc_head));
+ u16 msdu_size = atmel_rmem16(priv, atmel_tx(priv, TX_DESC_SIZE_OFFSET, priv->tx_desc_head));
+ u8 type = atmel_rmem8(priv, atmel_tx(priv, TX_DESC_PACKET_TYPE_OFFSET, priv->tx_desc_head));
+
+ atmel_wmem8(priv, atmel_tx(priv, TX_DESC_FLAGS_OFFSET, priv->tx_desc_head), 0);
+
+ priv->tx_free_mem += msdu_size;
+ priv->tx_desc_free++;
+
+ if (priv->tx_buff_head + msdu_size > (priv->host_info.tx_buff_pos + priv->host_info.tx_buff_size))
+ priv->tx_buff_head = 0;
+ else
+ priv->tx_buff_head += msdu_size;
+
+ if (priv->tx_desc_head < (priv->host_info.tx_desc_count - 1))
+ priv->tx_desc_head++ ;
+ else
+ priv->tx_desc_head = 0;
+
+ if (type == TX_PACKET_TYPE_DATA) {
+ if (status == TX_STATUS_SUCCESS)
+ priv->stats.tx_packets++;
+ else
+ priv->stats.tx_errors++;
+ netif_wake_queue(priv->dev);
+ }
+ }
+}
+
+static u16 find_tx_buff(struct atmel_private *priv, u16 len)
+{
+ u16 bottom_free = priv->host_info.tx_buff_size - priv->tx_buff_tail;
+
+ if (priv->tx_desc_free == 3 || priv->tx_free_mem < len)
+ return 0;
+
+ if (bottom_free >= len)
+ return priv->host_info.tx_buff_pos + priv->tx_buff_tail;
+
+ if (priv->tx_free_mem - bottom_free >= len) {
+ priv->tx_buff_tail = 0;
+ return priv->host_info.tx_buff_pos;
+ }
+
+ return 0;
+}
+
+static void tx_update_descriptor(struct atmel_private *priv, int is_bcast, u16 len, u16 buff, u8 type)
+{
+ atmel_wmem16(priv, atmel_tx(priv, TX_DESC_POS_OFFSET, priv->tx_desc_tail), buff);
+ atmel_wmem16(priv, atmel_tx(priv, TX_DESC_SIZE_OFFSET, priv->tx_desc_tail), len);
+ if (!priv->use_wpa)
+ atmel_wmem16(priv, atmel_tx(priv, TX_DESC_HOST_LENGTH_OFFSET, priv->tx_desc_tail), len);
+ atmel_wmem8(priv, atmel_tx(priv, TX_DESC_PACKET_TYPE_OFFSET, priv->tx_desc_tail), type);
+ atmel_wmem8(priv, atmel_tx(priv, TX_DESC_RATE_OFFSET, priv->tx_desc_tail), priv->tx_rate);
+ atmel_wmem8(priv, atmel_tx(priv, TX_DESC_RETRY_OFFSET, priv->tx_desc_tail), 0);
+ if (priv->use_wpa) {
+ int cipher_type, cipher_length;
+ if (is_bcast) {
+ cipher_type = priv->group_cipher_suite;
+ if (cipher_type == CIPHER_SUITE_WEP_64 ||
+ cipher_type == CIPHER_SUITE_WEP_128 )
+ cipher_length = 8;
+ else if (cipher_type == CIPHER_SUITE_TKIP)
+ cipher_length = 12;
+ else if (priv->pairwise_cipher_suite == CIPHER_SUITE_WEP_64 ||
+ priv->pairwise_cipher_suite == CIPHER_SUITE_WEP_128) {
+ cipher_type = priv->pairwise_cipher_suite;
+ cipher_length = 8;
+ } else {
+ cipher_type = CIPHER_SUITE_NONE;
+ cipher_length = 0;
+ }
+ } else {
+ cipher_type = priv->pairwise_cipher_suite;
+ if (cipher_type == CIPHER_SUITE_WEP_64 ||
+ cipher_type == CIPHER_SUITE_WEP_128 )
+ cipher_length = 8;
+ else if (cipher_type == CIPHER_SUITE_TKIP)
+ cipher_length = 12;
+ else if (priv->group_cipher_suite == CIPHER_SUITE_WEP_64 ||
+ priv->group_cipher_suite == CIPHER_SUITE_WEP_128) {
+ cipher_type = priv->group_cipher_suite;
+ cipher_length = 8;
+ } else {
+ cipher_type = CIPHER_SUITE_NONE;
+ cipher_length = 0;
+ }
+ }
+
+ atmel_wmem8(priv, atmel_tx(priv, TX_DESC_CIPHER_TYPE_OFFSET, priv->tx_desc_tail),
+ cipher_type);
+ atmel_wmem8(priv, atmel_tx(priv, TX_DESC_CIPHER_LENGTH_OFFSET, priv->tx_desc_tail),
+ cipher_length);
+ }
+ atmel_wmem32(priv, atmel_tx(priv, TX_DESC_NEXT_OFFSET, priv->tx_desc_tail), 0x80000000L);
+ atmel_wmem8(priv, atmel_tx(priv, TX_DESC_FLAGS_OFFSET, priv->tx_desc_tail), TX_FIRM_OWN);
+ if (priv->tx_desc_previous != priv->tx_desc_tail)
+ atmel_wmem32(priv, atmel_tx(priv, TX_DESC_NEXT_OFFSET, priv->tx_desc_previous), 0);
+ priv->tx_desc_previous = priv->tx_desc_tail;
+ if (priv->tx_desc_tail < (priv->host_info.tx_desc_count -1 ))
+ priv->tx_desc_tail++;
+ else
+ priv->tx_desc_tail = 0;
+ priv->tx_desc_free--;
+ priv->tx_free_mem -= len;
+
+}
+
+static int start_tx (struct sk_buff *skb, struct net_device *dev)
+{
+ struct atmel_private *priv = netdev_priv(dev);
+ struct ieee802_11_hdr header;
+ unsigned long flags;
+ u16 buff, frame_ctl, len = (ETH_ZLEN < skb->len) ? skb->len : ETH_ZLEN;
+ u8 SNAP_RFC1024[6] = {0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00};
+
+ if (priv->card && priv->present_callback &&
+ !(*priv->present_callback)(priv->card)) {
+ priv->stats.tx_errors++;
+ dev_kfree_skb(skb);
+ return 0;
+ }
+
+ if (priv->station_state != STATION_STATE_READY) {
+ priv->stats.tx_errors++;
+ dev_kfree_skb(skb);
+ return 0;
+ }
+
+ /* first ensure the timer func cannot run */
+ spin_lock_bh(&priv->timerlock);
+ /* then stop the hardware ISR */
+ spin_lock_irqsave(&priv->irqlock, flags);
+ /* nb doing the above in the opposite order will deadlock */
+
+ /* The Wireless Header is 30 bytes. In the Ethernet packet we "cut" the
+ 12 first bytes (containing DA/SA) and put them in the appropriate fields of
+ the Wireless Header. Thus the packet length is then the initial + 18 (+30-12) */
+
+ if (!(buff = find_tx_buff(priv, len + 18))) {
+ priv->stats.tx_dropped++;
+ spin_unlock_irqrestore(&priv->irqlock, flags);
+ spin_unlock_bh(&priv->timerlock);
+ netif_stop_queue(dev);
+ return 1;
+ }
+
+ frame_ctl = IEEE802_11_FTYPE_DATA;
+ header.duration_id = 0;
+ header.seq_ctl = 0;
+ if (priv->wep_is_on)
+ frame_ctl |= IEEE802_11_FCTL_WEP;
+ if (priv->operating_mode == IW_MODE_ADHOC) {
+ memcpy(&header.addr1, skb->data, 6);
+ memcpy(&header.addr2, dev->dev_addr, 6);
+ memcpy(&header.addr3, priv->BSSID, 6);
+ } else {
+ frame_ctl |= IEEE802_11_FCTL_TODS;
+ memcpy(&header.addr1, priv->CurrentBSSID, 6);
+ memcpy(&header.addr2, dev->dev_addr, 6);
+ memcpy(&header.addr3, skb->data, 6);
+ }
+
+ if (priv->use_wpa)
+ memcpy(&header.addr4, SNAP_RFC1024, 6);
+
+ header.frame_ctl = cpu_to_le16(frame_ctl);
+ /* Copy the wireless header into the card */
+ atmel_copy_to_card(dev, buff, (unsigned char *)&header, DATA_FRAME_WS_HEADER_SIZE);
+ /* Copy the packet sans its 802.3 header addresses which have been replaced */
+ atmel_copy_to_card(dev, buff + DATA_FRAME_WS_HEADER_SIZE, skb->data + 12, len - 12);
+ priv->tx_buff_tail += len - 12 + DATA_FRAME_WS_HEADER_SIZE;
+
+ /* low bit of first byte of destination tells us if broadcast */
+ tx_update_descriptor(priv, *(skb->data) & 0x01, len + 18, buff, TX_PACKET_TYPE_DATA);
+ dev->trans_start = jiffies;
+ priv->stats.tx_bytes += len;
+
+ spin_unlock_irqrestore(&priv->irqlock, flags);
+ spin_unlock_bh(&priv->timerlock);
+ dev_kfree_skb(skb);
+
+ return 0;
+}
+
+static void atmel_transmit_management_frame(struct atmel_private *priv,
+ struct ieee802_11_hdr *header,
+ u8 *body, int body_len)
+{
+ u16 buff;
+ int len = MGMT_FRAME_BODY_OFFSET + body_len;
+
+ if (!(buff = find_tx_buff(priv, len)))
+ return;
+
+ atmel_copy_to_card(priv->dev, buff, (u8 *)header, MGMT_FRAME_BODY_OFFSET);
+ atmel_copy_to_card(priv->dev, buff + MGMT_FRAME_BODY_OFFSET, body, body_len);
+ priv->tx_buff_tail += len;
+ tx_update_descriptor(priv, header->addr1[0] & 0x01, len, buff, TX_PACKET_TYPE_MGMT);
+}
+
+static void fast_rx_path(struct atmel_private *priv, struct ieee802_11_hdr *header,
+ u16 msdu_size, u16 rx_packet_loc, u32 crc)
+{
+ /* fast path: unfragmented packet copy directly into skbuf */
+ u8 mac4[6];
+ struct sk_buff *skb;
+ unsigned char *skbp;
+
+ /* get the final, mac 4 header field, this tells us encapsulation */
+ atmel_copy_to_host(priv->dev, mac4, rx_packet_loc + 24, 6);
+ msdu_size -= 6;
+
+ if (priv->do_rx_crc) {
+ crc = crc32_le(crc, mac4, 6);
+ msdu_size -= 4;
+ }
+
+ if (!(skb = dev_alloc_skb(msdu_size + 14))) {
+ priv->stats.rx_dropped++;
+ return;
+ }
+
+ skb_reserve(skb, 2);
+ skbp = skb_put(skb, msdu_size + 12);
+ atmel_copy_to_host(priv->dev, skbp + 12, rx_packet_loc + 30, msdu_size);
+
+ if (priv->do_rx_crc) {
+ u32 netcrc;
+ crc = crc32_le(crc, skbp + 12, msdu_size);
+ atmel_copy_to_host(priv->dev, (void *)&netcrc, rx_packet_loc + 30 + msdu_size, 4);
+ if ((crc ^ 0xffffffff) != netcrc) {
+ priv->stats.rx_crc_errors++;
+ dev_kfree_skb(skb);
+ return;
+ }
+ }
+
+ memcpy(skbp, header->addr1, 6); /* destination address */
+ if (le16_to_cpu(header->frame_ctl) & IEEE802_11_FCTL_FROMDS)
+ memcpy(&skbp[6], header->addr3, 6);
+ else
+ memcpy(&skbp[6], header->addr2, 6); /* source address */
+
+ priv->dev->last_rx=jiffies;
+ skb->dev = priv->dev;
+ skb->protocol = eth_type_trans(skb, priv->dev);
+ skb->ip_summed = CHECKSUM_NONE;
+ netif_rx(skb);
+ priv->stats.rx_bytes += 12 + msdu_size;
+ priv->stats.rx_packets++;
+}
+
+/* Test to see if the packet in card memory at packet_loc has a valid CRC
+ It doesn't matter that this is slow: it is only used to proble the first few packets. */
+static int probe_crc(struct atmel_private *priv, u16 packet_loc, u16 msdu_size)
+{
+ int i = msdu_size - 4;
+ u32 netcrc, crc = 0xffffffff;
+
+ if (msdu_size < 4)
+ return 0;
+
+ atmel_copy_to_host(priv->dev, (void *)&netcrc, packet_loc + i, 4);
+
+ atmel_writeAR(priv->dev, packet_loc);
+ while (i--) {
+ u8 octet = atmel_read8(priv->dev, DR);
+ crc = crc32_le(crc, &octet, 1);
+ }
+
+ return (crc ^ 0xffffffff) == netcrc;
+}
+
+static void frag_rx_path(struct atmel_private *priv, struct ieee802_11_hdr *header,
+ u16 msdu_size, u16 rx_packet_loc, u32 crc, u16 seq_no, u8 frag_no, int more_frags)
+{
+ u8 mac4[6];
+ u8 source[6];
+ struct sk_buff *skb;
+
+ if (le16_to_cpu(header->frame_ctl) & IEEE802_11_FCTL_FROMDS)
+ memcpy(source, header->addr3, 6);
+ else
+ memcpy(source, header->addr2, 6);
+
+ rx_packet_loc += 24; /* skip header */
+
+ if (priv->do_rx_crc)
+ msdu_size -= 4;
+
+ if (frag_no == 0) { /* first fragment */
+ atmel_copy_to_host(priv->dev, mac4, rx_packet_loc, 6);
+ msdu_size -= 6;
+ rx_packet_loc += 6;
+
+ if (priv->do_rx_crc)
+ crc = crc32_le(crc, mac4, 6);
+
+ priv->frag_seq = seq_no;
+ priv->frag_no = 1;
+ priv->frag_len = msdu_size;
+ memcpy(priv->frag_source, source, 6);
+ memcpy(&priv->rx_buf[6], source, 6);
+ memcpy(priv->rx_buf, header->addr1, 6);
+
+ atmel_copy_to_host(priv->dev, &priv->rx_buf[12], rx_packet_loc, msdu_size);
+
+ if (priv->do_rx_crc) {
+ u32 netcrc;
+ crc = crc32_le(crc, &priv->rx_buf[12], msdu_size);
+ atmel_copy_to_host(priv->dev, (void *)&netcrc, rx_packet_loc + msdu_size, 4);
+ if ((crc ^ 0xffffffff) != netcrc) {
+ priv->stats.rx_crc_errors++;
+ memset(priv->frag_source, 0xff, 6);
+ }
+ }
+
+ } else if (priv->frag_no == frag_no &&
+ priv->frag_seq == seq_no &&
+ memcmp(priv->frag_source, source, 6) == 0) {
+
+ atmel_copy_to_host(priv->dev, &priv->rx_buf[12 + priv->frag_len],
+ rx_packet_loc, msdu_size);
+ if (priv->do_rx_crc) {
+ u32 netcrc;
+ crc = crc32_le(crc,
+ &priv->rx_buf[12 + priv->frag_len],
+ msdu_size);
+ atmel_copy_to_host(priv->dev, (void *)&netcrc, rx_packet_loc + msdu_size, 4);
+ if ((crc ^ 0xffffffff) != netcrc) {
+ priv->stats.rx_crc_errors++;
+ memset(priv->frag_source, 0xff, 6);
+ more_frags = 1; /* don't send broken assembly */
+ }
+ }
+
+ priv->frag_len += msdu_size;
+ priv->frag_no++;
+
+ if (!more_frags) { /* last one */
+ memset(priv->frag_source, 0xff, 6);
+ if (!(skb = dev_alloc_skb(priv->frag_len + 14))) {
+ priv->stats.rx_dropped++;
+ } else {
+ skb_reserve(skb, 2);
+ memcpy(skb_put(skb, priv->frag_len + 12),
+ priv->rx_buf,
+ priv->frag_len + 12);
+ priv->dev->last_rx = jiffies;
+ skb->dev = priv->dev;
+ skb->protocol = eth_type_trans(skb, priv->dev);
+ skb->ip_summed = CHECKSUM_NONE;
+ netif_rx(skb);
+ priv->stats.rx_bytes += priv->frag_len + 12;
+ priv->stats.rx_packets++;
+ }
+ }
+
+ } else
+ priv->wstats.discard.fragment++;
+}
+
+static void rx_done_irq(struct atmel_private *priv)
+{
+ int i;
+ struct ieee802_11_hdr header;
+
+ for (i = 0;
+ atmel_rmem8(priv, atmel_rx(priv, RX_DESC_FLAGS_OFFSET, priv->rx_desc_head)) == RX_DESC_FLAG_VALID &&
+ i < priv->host_info.rx_desc_count;
+ i++) {
+
+ u16 msdu_size, rx_packet_loc, frame_ctl, seq_control;
+ u8 status = atmel_rmem8(priv, atmel_rx(priv, RX_DESC_STATUS_OFFSET, priv->rx_desc_head));
+ u32 crc = 0xffffffff;
+
+ if (status != RX_STATUS_SUCCESS) {
+ if (status == 0xc1) /* determined by experiment */
+ priv->wstats.discard.nwid++;
+ else
+ priv->stats.rx_errors++;
+ goto next;
+ }
+
+ msdu_size = atmel_rmem16(priv, atmel_rx(priv, RX_DESC_MSDU_SIZE_OFFSET, priv->rx_desc_head));
+ rx_packet_loc = atmel_rmem16(priv, atmel_rx(priv, RX_DESC_MSDU_POS_OFFSET, priv->rx_desc_head));
+
+ if (msdu_size < 30) {
+ priv->stats.rx_errors++;
+ goto next;
+ }
+
+ /* Get header as far as end of seq_ctl */
+ atmel_copy_to_host(priv->dev, (char *)&header, rx_packet_loc, 24);
+ frame_ctl = le16_to_cpu(header.frame_ctl);
+ seq_control = le16_to_cpu(header.seq_ctl);
+
+ /* probe for CRC use here if needed once five packets have arrived with
+ the same crc status, we assume we know what's happening and stop probing */
+ if (priv->probe_crc) {
+ if (!priv->wep_is_on || !(frame_ctl & IEEE802_11_FCTL_WEP)) {
+ priv->do_rx_crc = probe_crc(priv, rx_packet_loc, msdu_size);
+ } else {
+ priv->do_rx_crc = probe_crc(priv, rx_packet_loc + 24, msdu_size - 24);
+ }
+ if (priv->do_rx_crc) {
+ if (priv->crc_ok_cnt++ > 5)
+ priv->probe_crc = 0;
+ } else {
+ if (priv->crc_ko_cnt++ > 5)
+ priv->probe_crc = 0;
+ }
+ }
+
+ /* don't CRC header when WEP in use */
+ if (priv->do_rx_crc && (!priv->wep_is_on || !(frame_ctl & IEEE802_11_FCTL_WEP))) {
+ crc = crc32_le(0xffffffff, (unsigned char *)&header, 24);
+ }
+ msdu_size -= 24; /* header */
+
+ if ((frame_ctl & IEEE802_11_FCTL_FTYPE) == IEEE802_11_FTYPE_DATA) {
+
+ int more_fragments = frame_ctl & IEEE802_11_FCTL_MOREFRAGS;
+ u8 packet_fragment_no = seq_control & IEEE802_11_SCTL_FRAG;
+ u16 packet_sequence_no = (seq_control & IEEE802_11_SCTL_SEQ) >> 4;
+
+ if (!more_fragments && packet_fragment_no == 0 ) {
+ fast_rx_path(priv, &header, msdu_size, rx_packet_loc, crc);
+ } else {
+ frag_rx_path(priv, &header, msdu_size, rx_packet_loc, crc,
+ packet_sequence_no, packet_fragment_no, more_fragments);
+ }
+ }
+
+ if ((frame_ctl & IEEE802_11_FCTL_FTYPE) == IEEE802_11_FTYPE_MGMT) {
+ /* copy rest of packet into buffer */
+ atmel_copy_to_host(priv->dev, (unsigned char *)&priv->rx_buf, rx_packet_loc + 24, msdu_size);
+
+ /* we use the same buffer for frag reassembly and control packets */
+ memset(priv->frag_source, 0xff, 6);
+
+ if (priv->do_rx_crc) {
+ /* last 4 octets is crc */
+ msdu_size -= 4;
+ crc = crc32_le(crc, (unsigned char *)&priv->rx_buf, msdu_size);
+ if ((crc ^ 0xffffffff) != (*((u32 *)&priv->rx_buf[msdu_size]))) {
+ priv->stats.rx_crc_errors++;
+ goto next;
+ }
+ }
+
+ atmel_management_frame(priv, &header, msdu_size,
+ atmel_rmem8(priv, atmel_rx(priv, RX_DESC_RSSI_OFFSET, priv->rx_desc_head)));
+ }
+
+ next:
+ /* release descriptor */
+ atmel_wmem8(priv, atmel_rx(priv, RX_DESC_FLAGS_OFFSET, priv->rx_desc_head), RX_DESC_FLAG_CONSUMED);
+
+ if (priv->rx_desc_head < (priv->host_info.rx_desc_count - 1))
+ priv->rx_desc_head++;
+ else
+ priv->rx_desc_head = 0;
+ }
+}
+
+static irqreturn_t service_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct net_device *dev = (struct net_device *) dev_id;
+ struct atmel_private *priv = netdev_priv(dev);
+ u8 isr;
+ int i = -1;
+ static u8 irq_order[] = {
+ ISR_OUT_OF_RANGE,
+ ISR_RxCOMPLETE,
+ ISR_TxCOMPLETE,
+ ISR_RxFRAMELOST,
+ ISR_FATAL_ERROR,
+ ISR_COMMAND_COMPLETE,
+ ISR_IBSS_MERGE,
+ ISR_GENERIC_IRQ
+ };
+
+
+ if (priv->card && priv->present_callback &&
+ !(*priv->present_callback)(priv->card))
+ return IRQ_HANDLED;
+
+ /* In this state upper-level code assumes it can mess with
+ the card unhampered by interrupts which may change register state.
+ Note that even though the card shouldn't generate interrupts
+ the inturrupt line may be shared. This allows card setup
+ to go on without disabling interrupts for a long time. */
+ if (priv->station_state == STATION_STATE_DOWN)
+ return IRQ_NONE;
+
+ atmel_clear_gcr(dev, GCR_ENINT); /* disable interrupts */
+
+ while (1) {
+ if (!atmel_lock_mac(priv)) {
+ /* failed to contact card */
+ printk(KERN_ALERT "%s: failed to contact MAC.\n", dev->name);
+ return IRQ_HANDLED;
+ }
+
+ isr = atmel_rmem8(priv, atmel_hi(priv, IFACE_INT_STATUS_OFFSET));
+ atmel_wmem8(priv, atmel_hi(priv, IFACE_LOCKOUT_MAC_OFFSET), 0);
+
+ if (!isr) {
+ atmel_set_gcr(dev, GCR_ENINT); /* enable interrupts */
+ return i == -1 ? IRQ_NONE : IRQ_HANDLED;
+ }
+
+ atmel_set_gcr(dev, GCR_ACKINT); /* acknowledge interrupt */
+
+ for (i = 0; i < sizeof(irq_order)/sizeof(u8); i++)
+ if (isr & irq_order[i])
+ break;
+
+ if (!atmel_lock_mac(priv)) {
+ /* failed to contact card */
+ printk(KERN_ALERT "%s: failed to contact MAC.\n", dev->name);
+ return IRQ_HANDLED;
+ }
+
+ isr = atmel_rmem8(priv, atmel_hi(priv, IFACE_INT_STATUS_OFFSET));
+ isr ^= irq_order[i];
+ atmel_wmem8(priv, atmel_hi(priv, IFACE_INT_STATUS_OFFSET), isr);
+ atmel_wmem8(priv, atmel_hi(priv, IFACE_LOCKOUT_MAC_OFFSET), 0);
+
+ switch (irq_order[i]) {
+
+ case ISR_OUT_OF_RANGE:
+ if (priv->operating_mode == IW_MODE_INFRA &&
+ priv->station_state == STATION_STATE_READY) {
+ priv->station_is_associated = 0;
+ atmel_scan(priv, 1);
+ }
+ break;
+
+ case ISR_RxFRAMELOST:
+ priv->wstats.discard.misc++;
+ /* fall through */
+ case ISR_RxCOMPLETE:
+ rx_done_irq(priv);
+ break;
+
+ case ISR_TxCOMPLETE:
+ tx_done_irq(priv);
+ break;
+
+ case ISR_FATAL_ERROR:
+ printk(KERN_ALERT "%s: *** FATAL error interrupt ***\n", dev->name);
+ atmel_enter_state(priv, STATION_STATE_MGMT_ERROR);
+ break;
+
+ case ISR_COMMAND_COMPLETE:
+ atmel_command_irq(priv);
+ break;
+
+ case ISR_IBSS_MERGE:
+ atmel_get_mib(priv, Mac_Mgmt_Mib_Type, MAC_MGMT_MIB_CUR_BSSID_POS,
+ priv->CurrentBSSID, 6);
+ /* The WPA stuff cares about the current AP address */
+ if (priv->use_wpa)
+ build_wpa_mib(priv);
+ break;
+ case ISR_GENERIC_IRQ:
+ printk(KERN_INFO "%s: Generic_irq received.\n", dev->name);
+ break;
+ }
+ }
+}
+
+
+static struct net_device_stats *atmel_get_stats (struct net_device *dev)
+{
+ struct atmel_private *priv = netdev_priv(dev);
+ return &priv->stats;
+}
+
+static struct iw_statistics *atmel_get_wireless_stats (struct net_device *dev)
+{
+ struct atmel_private *priv = netdev_priv(dev);
+
+ /* update the link quality here in case we are seeing no beacons
+ at all to drive the process */
+ atmel_smooth_qual(priv);
+
+ priv->wstats.status = priv->station_state;
+
+ if (priv->operating_mode == IW_MODE_INFRA) {
+ if (priv->station_state != STATION_STATE_READY) {
+ priv->wstats.qual.qual = 0;
+ priv->wstats.qual.level = 0;
+ priv->wstats.qual.updated = (IW_QUAL_QUAL_INVALID
+ | IW_QUAL_LEVEL_INVALID);
+ }
+ priv->wstats.qual.noise = 0;
+ priv->wstats.qual.updated |= IW_QUAL_NOISE_INVALID;
+ } else {
+ /* Quality levels cannot be determined in ad-hoc mode,
+ because we can 'hear' more that one remote station. */
+ priv->wstats.qual.qual = 0;
+ priv->wstats.qual.level = 0;
+ priv->wstats.qual.noise = 0;
+ priv->wstats.qual.updated = IW_QUAL_QUAL_INVALID
+ | IW_QUAL_LEVEL_INVALID
+ | IW_QUAL_NOISE_INVALID;
+ priv->wstats.miss.beacon = 0;
+ }
+
+ return (&priv->wstats);
+}
+
+static int atmel_change_mtu(struct net_device *dev, int new_mtu)
+{
+ if ((new_mtu < 68) || (new_mtu > 2312))
+ return -EINVAL;
+ dev->mtu = new_mtu;
+ return 0;
+}
+
+static int atmel_set_mac_address(struct net_device *dev, void *p)
+{
+ struct sockaddr *addr = p;
+
+ memcpy (dev->dev_addr, addr->sa_data, dev->addr_len);
+ return atmel_open(dev);
+}
+
+EXPORT_SYMBOL(atmel_open);
+
+int atmel_open (struct net_device *dev)
+{
+ struct atmel_private *priv = netdev_priv(dev);
+ int i, channel;
+
+ /* any scheduled timer is no longer needed and might screw things up.. */
+ del_timer_sync(&priv->management_timer);
+
+ /* Interrupts will not touch the card once in this state... */
+ priv->station_state = STATION_STATE_DOWN;
+
+ if (priv->new_SSID_size) {
+ memcpy(priv->SSID, priv->new_SSID, priv->new_SSID_size);
+ priv->SSID_size = priv->new_SSID_size;
+ priv->new_SSID_size = 0;
+ }
+ priv->BSS_list_entries = 0;
+
+ priv->AuthenticationRequestRetryCnt = 0;
+ priv->AssociationRequestRetryCnt = 0;
+ priv->ReAssociationRequestRetryCnt = 0;
+ priv->CurrentAuthentTransactionSeqNum = 0x0001;
+ priv->ExpectedAuthentTransactionSeqNum = 0x0002;
+
+ priv->site_survey_state = SITE_SURVEY_IDLE;
+ priv->station_is_associated = 0;
+
+ if (!reset_atmel_card(dev))
+ return -EAGAIN;
+
+ if (priv->config_reg_domain) {
+ priv->reg_domain = priv->config_reg_domain;
+ atmel_set_mib8(priv, Phy_Mib_Type, PHY_MIB_REG_DOMAIN_POS, priv->reg_domain);
+ } else {
+ priv->reg_domain = atmel_get_mib8(priv, Phy_Mib_Type, PHY_MIB_REG_DOMAIN_POS);
+ for (i = 0; i < sizeof(channel_table)/sizeof(channel_table[0]); i++)
+ if (priv->reg_domain == channel_table[i].reg_domain)
+ break;
+ if (i == sizeof(channel_table)/sizeof(channel_table[0])) {
+ priv->reg_domain = REG_DOMAIN_MKK1;
+ printk(KERN_ALERT "%s: failed to get regulatory domain: assuming MKK1.\n", dev->name);
+ }
+ }
+
+ if ((channel = atmel_validate_channel(priv, priv->channel)))
+ priv->channel = channel;
+
+ /* this moves station_state on.... */
+ atmel_scan(priv, 1);
+
+ atmel_set_gcr(priv->dev, GCR_ENINT); /* enable interrupts */
+ return 0;
+}
+
+static int atmel_close (struct net_device *dev)
+{
+ struct atmel_private *priv = netdev_priv(dev);
+
+ atmel_enter_state(priv, STATION_STATE_DOWN);
+
+ if (priv->bus_type == BUS_TYPE_PCCARD)
+ atmel_write16(dev, GCR, 0x0060);
+ atmel_write16(dev, GCR, 0x0040);
+ return 0;
+}
+
+static int atmel_validate_channel(struct atmel_private *priv, int channel)
+{
+ /* check that channel is OK, if so return zero,
+ else return suitable default channel */
+ int i;
+
+ for (i = 0; i < sizeof(channel_table)/sizeof(channel_table[0]); i++)
+ if (priv->reg_domain == channel_table[i].reg_domain) {
+ if (channel >= channel_table[i].min &&
+ channel <= channel_table[i].max)
+ return 0;
+ else
+ return channel_table[i].min;
+ }
+ return 0;
+}
+
+static int atmel_proc_output (char *buf, struct atmel_private *priv)
+{
+ int i;
+ char *p = buf;
+ char *s, *r, *c;
+
+ p += sprintf(p, "Driver version:\t\t%d.%d\n", DRIVER_MAJOR, DRIVER_MINOR);
+
+ if (priv->station_state != STATION_STATE_DOWN) {
+ p += sprintf(p, "Firmware version:\t%d.%d build %d\nFirmware location:\t",
+ priv->host_info.major_version,
+ priv->host_info.minor_version,
+ priv->host_info.build_version);
+
+ if (priv->card_type != CARD_TYPE_EEPROM)
+ p += sprintf(p, "on card\n");
+ else if (priv->firmware)
+ p += sprintf(p, "%s loaded by host\n", priv->firmware_id);
+ else
+ p += sprintf(p, "%s loaded by hotplug\n", priv->firmware_id);
+
+ switch(priv->card_type) {
+ case CARD_TYPE_PARALLEL_FLASH: c = "Parallel flash"; break;
+ case CARD_TYPE_SPI_FLASH: c = "SPI flash\n"; break;
+ case CARD_TYPE_EEPROM: c = "EEPROM"; break;
+ default: c = "<unknown>";
+ }
+
+
+ r = "<unknown>";
+ for (i = 0; i < sizeof(channel_table)/sizeof(channel_table[0]); i++)
+ if (priv->reg_domain == channel_table[i].reg_domain)
+ r = channel_table[i].name;
+
+ p += sprintf(p, "MAC memory type:\t%s\n", c);
+ p += sprintf(p, "Regulatory domain:\t%s\n", r);
+ p += sprintf(p, "Host CRC checking:\t%s\n",
+ priv->do_rx_crc ? "On" : "Off");
+ p += sprintf(p, "WPA-capable firmware:\t%s\n",
+ priv->use_wpa ? "Yes" : "No");
+ }
+
+ switch(priv->station_state) {
+ case STATION_STATE_SCANNING: s = "Scanning"; break;
+ case STATION_STATE_JOINNING: s = "Joining"; break;
+ case STATION_STATE_AUTHENTICATING: s = "Authenticating"; break;
+ case STATION_STATE_ASSOCIATING: s = "Associating"; break;
+ case STATION_STATE_READY: s = "Ready"; break;
+ case STATION_STATE_REASSOCIATING: s = "Reassociating"; break;
+ case STATION_STATE_MGMT_ERROR: s = "Management error"; break;
+ case STATION_STATE_DOWN: s = "Down"; break;
+ default: s = "<unknown>";
+ }
+
+ p += sprintf(p, "Current state:\t\t%s\n", s);
+ return p - buf;
+}
+
+static int atmel_read_proc(char *page, char **start, off_t off,
+ int count, int *eof, void *data)
+{
+ struct atmel_private *priv = data;
+ int len = atmel_proc_output (page, priv);
+ if (len <= off+count) *eof = 1;
+ *start = page + off;
+ len -= off;
+ if (len>count) len = count;
+ if (len<0) len = 0;
+ return len;
+}
+
+struct net_device *init_atmel_card( unsigned short irq, int port, const AtmelFWType fw_type,
+ struct device *sys_dev, int (*card_present)(void *), void *card)
+{
+ struct net_device *dev;
+ struct atmel_private *priv;
+ int rc;
+
+ /* Create the network device object. */
+ dev = alloc_etherdev(sizeof(*priv));
+ if (!dev) {
+ printk(KERN_ERR "atmel: Couldn't alloc_etherdev\n");
+ return NULL;
+ }
+ if (dev_alloc_name(dev, dev->name) < 0) {
+ printk(KERN_ERR "atmel: Couldn't get name!\n");
+ goto err_out_free;
+ }
+
+ priv = netdev_priv(dev);
+ priv->dev = dev;
+ priv->sys_dev = sys_dev;
+ priv->present_callback = card_present;
+ priv->card = card;
+ priv->firmware = NULL;
+ priv->firmware_id[0] = '\0';
+ priv->firmware_type = fw_type;
+ if (firmware) /* module parameter */
+ strcpy(priv->firmware_id, firmware);
+ priv->bus_type = card_present ? BUS_TYPE_PCCARD : BUS_TYPE_PCI;
+ priv->station_state = STATION_STATE_DOWN;
+ priv->do_rx_crc = 0;
+ /* For PCMCIA cards, some chips need CRC, some don't
+ so we have to probe. */
+ if (priv->bus_type == BUS_TYPE_PCCARD) {
+ priv->probe_crc = 1;
+ priv->crc_ok_cnt = priv->crc_ko_cnt = 0;
+ } else
+ priv->probe_crc = 0;
+ memset(&priv->stats, 0, sizeof(priv->stats));
+ memset(&priv->wstats, 0, sizeof(priv->wstats));
+ priv->last_qual = jiffies;
+ priv->last_beacon_timestamp = 0;
+ memset(priv->frag_source, 0xff, sizeof(priv->frag_source));
+ memset(priv->BSSID, 0, 6);
+ priv->CurrentBSSID[0] = 0xFF; /* Initialize to something invalid.... */
+ priv->station_was_associated = 0;
+
+ priv->last_survey = jiffies;
+ priv->preamble = LONG_PREAMBLE;
+ priv->operating_mode = IW_MODE_INFRA;
+ priv->connect_to_any_BSS = 0;
+ priv->config_reg_domain = 0;
+ priv->reg_domain = 0;
+ priv->tx_rate = 3;
+ priv->auto_tx_rate = 1;
+ priv->channel = 4;
+ priv->power_mode = 0;
+ priv->SSID[0] = '\0';
+ priv->SSID_size = 0;
+ priv->new_SSID_size = 0;
+ priv->frag_threshold = 2346;
+ priv->rts_threshold = 2347;
+ priv->short_retry = 7;
+ priv->long_retry = 4;
+
+ priv->wep_is_on = 0;
+ priv->default_key = 0;
+ priv->encryption_level = 0;
+ priv->exclude_unencrypted = 0;
+ priv->group_cipher_suite = priv->pairwise_cipher_suite = CIPHER_SUITE_NONE;
+ priv->use_wpa = 0;
+ memset(priv->wep_keys, 0, sizeof(priv->wep_keys));
+ memset(priv->wep_key_len, 0, sizeof(priv->wep_key_len));
+
+ priv->default_beacon_period = priv->beacon_period = 100;
+ priv->listen_interval = 1;
+
+ init_timer(&priv->management_timer);
+ spin_lock_init(&priv->irqlock);
+ spin_lock_init(&priv->timerlock);
+ priv->management_timer.function = atmel_management_timer;
+ priv->management_timer.data = (unsigned long) dev;
+
+ dev->open = atmel_open;
+ dev->stop = atmel_close;
+ dev->change_mtu = atmel_change_mtu;
+ dev->set_mac_address = atmel_set_mac_address;
+ dev->hard_start_xmit = start_tx;
+ dev->get_stats = atmel_get_stats;
+ dev->get_wireless_stats = atmel_get_wireless_stats;
+ dev->wireless_handlers = (struct iw_handler_def *)&atmel_handler_def;
+ dev->do_ioctl = atmel_ioctl;
+ dev->irq = irq;
+ dev->base_addr = port;
+
+ SET_NETDEV_DEV(dev, sys_dev);
+
+ if ((rc = request_irq(dev->irq, service_interrupt, SA_SHIRQ, dev->name, dev))) {
+ printk(KERN_ERR "%s: register interrupt %d failed, rc %d\n", dev->name, irq, rc );
+ goto err_out_free;
+ }
+
+ if (priv->bus_type == BUS_TYPE_PCI &&
+ !request_region( dev->base_addr, 64, dev->name )) {
+ goto err_out_irq;
+ }
+
+ if (register_netdev(dev))
+ goto err_out_res;
+
+ if (!probe_atmel_card(dev)){
+ unregister_netdev(dev);
+ goto err_out_res;
+ }
+
+ netif_carrier_off(dev);
+
+ create_proc_read_entry ("driver/atmel", 0, NULL, atmel_read_proc, priv);
+
+ printk(KERN_INFO "%s: Atmel at76c50x wireless. Version %d.%d simon@thekelleys.org.uk\n",
+ dev->name, DRIVER_MAJOR, DRIVER_MINOR);
+
+ SET_MODULE_OWNER(dev);
+ return dev;
+
+ err_out_res:
+ if (priv->bus_type == BUS_TYPE_PCI)
+ release_region( dev->base_addr, 64 );
+ err_out_irq:
+ free_irq(dev->irq, dev);
+ err_out_free:
+ free_netdev(dev);
+ return NULL;
+}
+
+EXPORT_SYMBOL(init_atmel_card);
+
+void stop_atmel_card(struct net_device *dev, int freeres)
+{
+ struct atmel_private *priv = netdev_priv(dev);
+
+ /* put a brick on it... */
+ if (priv->bus_type == BUS_TYPE_PCCARD)
+ atmel_write16(dev, GCR, 0x0060);
+ atmel_write16(dev, GCR, 0x0040);
+
+ del_timer_sync(&priv->management_timer);
+ unregister_netdev(dev);
+ remove_proc_entry("driver/atmel", NULL);
+ free_irq(dev->irq, dev);
+ if (priv->firmware)
+ kfree(priv->firmware);
+ if (freeres) {
+ /* PCMCIA frees this stuff, so only for PCI */
+ release_region(dev->base_addr, 64);
+ }
+ free_netdev(dev);
+}
+
+EXPORT_SYMBOL(stop_atmel_card);
+
+static int atmel_set_essid(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_point *dwrq,
+ char *extra)
+{
+ struct atmel_private *priv = netdev_priv(dev);
+
+ /* Check if we asked for `any' */
+ if(dwrq->flags == 0) {
+ priv->connect_to_any_BSS = 1;
+ } else {
+ int index = (dwrq->flags & IW_ENCODE_INDEX) - 1;
+
+ priv->connect_to_any_BSS = 0;
+
+ /* Check the size of the string */
+ if (dwrq->length > MAX_SSID_LENGTH + 1)
+ return -E2BIG ;
+ if (index != 0)
+ return -EINVAL;
+
+ memcpy(priv->new_SSID, extra, dwrq->length - 1);
+ priv->new_SSID_size = dwrq->length - 1;
+ }
+
+ return -EINPROGRESS;
+}
+
+static int atmel_get_essid(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_point *dwrq,
+ char *extra)
+{
+ struct atmel_private *priv = netdev_priv(dev);
+
+ /* Get the current SSID */
+ if (priv->new_SSID_size != 0) {
+ memcpy(extra, priv->new_SSID, priv->new_SSID_size);
+ extra[priv->new_SSID_size] = '\0';
+ dwrq->length = priv->new_SSID_size + 1;
+ } else {
+ memcpy(extra, priv->SSID, priv->SSID_size);
+ extra[priv->SSID_size] = '\0';
+ dwrq->length = priv->SSID_size + 1;
+ }
+
+ dwrq->flags = !priv->connect_to_any_BSS; /* active */
+
+ return 0;
+}
+
+static int atmel_get_wap(struct net_device *dev,
+ struct iw_request_info *info,
+ struct sockaddr *awrq,
+ char *extra)
+{
+ struct atmel_private *priv = netdev_priv(dev);
+ memcpy(awrq->sa_data, priv->CurrentBSSID, 6);
+ awrq->sa_family = ARPHRD_ETHER;
+
+ return 0;
+}
+
+static int atmel_set_encode(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_point *dwrq,
+ char *extra)
+{
+ struct atmel_private *priv = netdev_priv(dev);
+
+ /* Basic checking: do we have a key to set ?
+ * Note : with the new API, it's impossible to get a NULL pointer.
+ * Therefore, we need to check a key size == 0 instead.
+ * New version of iwconfig properly set the IW_ENCODE_NOKEY flag
+ * when no key is present (only change flags), but older versions
+ * don't do it. - Jean II */
+ if (dwrq->length > 0) {
+ int index = (dwrq->flags & IW_ENCODE_INDEX) - 1;
+ int current_index = priv->default_key;
+ /* Check the size of the key */
+ if (dwrq->length > 13) {
+ return -EINVAL;
+ }
+ /* Check the index (none -> use current) */
+ if (index < 0 || index >= 4)
+ index = current_index;
+ else
+ priv->default_key = index;
+ /* Set the length */
+ if (dwrq->length > 5)
+ priv->wep_key_len[index] = 13;
+ else
+ if (dwrq->length > 0)
+ priv->wep_key_len[index] = 5;
+ else
+ /* Disable the key */
+ priv->wep_key_len[index] = 0;
+ /* Check if the key is not marked as invalid */
+ if(!(dwrq->flags & IW_ENCODE_NOKEY)) {
+ /* Cleanup */
+ memset(priv->wep_keys[index], 0, 13);
+ /* Copy the key in the driver */
+ memcpy(priv->wep_keys[index], extra, dwrq->length);
+ }
+ /* WE specify that if a valid key is set, encryption
+ * should be enabled (user may turn it off later)
+ * This is also how "iwconfig ethX key on" works */
+ if (index == current_index &&
+ priv->wep_key_len[index] > 0) {
+ priv->wep_is_on = 1;
+ priv->exclude_unencrypted = 1;
+ if (priv->wep_key_len[index] > 5) {
+ priv->pairwise_cipher_suite = CIPHER_SUITE_WEP_64;
+ priv->encryption_level = 2;
+ } else {
+ priv->pairwise_cipher_suite = CIPHER_SUITE_WEP_128;
+ priv->encryption_level = 1;
+ }
+ }
+ } else {
+ /* Do we want to just set the transmit key index ? */
+ int index = (dwrq->flags & IW_ENCODE_INDEX) - 1;
+ if ( index>=0 && index < 4 ) {
+ priv->default_key = index;
+ } else
+ /* Don't complain if only change the mode */
+ if(!dwrq->flags & IW_ENCODE_MODE) {
+ return -EINVAL;
+ }
+ }
+ /* Read the flags */
+ if(dwrq->flags & IW_ENCODE_DISABLED) {
+ priv->wep_is_on = 0;
+ priv->encryption_level = 0;
+ priv->pairwise_cipher_suite = CIPHER_SUITE_NONE;
+ } else {
+ priv->wep_is_on = 1;
+ if (priv->wep_key_len[priv->default_key] > 5) {
+ priv->pairwise_cipher_suite = CIPHER_SUITE_WEP_128;
+ priv->encryption_level = 2;
+ } else {
+ priv->pairwise_cipher_suite = CIPHER_SUITE_WEP_64;
+ priv->encryption_level = 1;
+ }
+ }
+ if(dwrq->flags & IW_ENCODE_RESTRICTED)
+ priv->exclude_unencrypted = 1;
+ if(dwrq->flags & IW_ENCODE_OPEN)
+ priv->exclude_unencrypted = 0;
+
+ return -EINPROGRESS; /* Call commit handler */
+}
+
+
+static int atmel_get_encode(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_point *dwrq,
+ char *extra)
+{
+ struct atmel_private *priv = netdev_priv(dev);
+ int index = (dwrq->flags & IW_ENCODE_INDEX) - 1;
+
+ if (!priv->wep_is_on)
+ dwrq->flags = IW_ENCODE_DISABLED;
+ else if (priv->exclude_unencrypted)
+ dwrq->flags = IW_ENCODE_RESTRICTED;
+ else
+ dwrq->flags = IW_ENCODE_OPEN;
+
+ /* Which key do we want ? -1 -> tx index */
+ if (index < 0 || index >= 4)
+ index = priv->default_key;
+ dwrq->flags |= index + 1;
+ /* Copy the key to the user buffer */
+ dwrq->length = priv->wep_key_len[index];
+ if (dwrq->length > 16) {
+ dwrq->length=0;
+ } else {
+ memset(extra, 0, 16);
+ memcpy(extra, priv->wep_keys[index], dwrq->length);
+ }
+
+ return 0;
+}
+
+static int atmel_get_name(struct net_device *dev,
+ struct iw_request_info *info,
+ char *cwrq,
+ char *extra)
+{
+ strcpy(cwrq, "IEEE 802.11-DS");
+ return 0;
+}
+
+static int atmel_set_rate(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *vwrq,
+ char *extra)
+{
+ struct atmel_private *priv = netdev_priv(dev);
+
+ if (vwrq->fixed == 0) {
+ priv->tx_rate = 3;
+ priv->auto_tx_rate = 1;
+ } else {
+ priv->auto_tx_rate = 0;
+
+ /* Which type of value ? */
+ if((vwrq->value < 4) && (vwrq->value >= 0)) {
+ /* Setting by rate index */
+ priv->tx_rate = vwrq->value;
+ } else {
+ /* Setting by frequency value */
+ switch (vwrq->value) {
+ case 1000000: priv->tx_rate = 0; break;
+ case 2000000: priv->tx_rate = 1; break;
+ case 5500000: priv->tx_rate = 2; break;
+ case 11000000: priv->tx_rate = 3; break;
+ default: return -EINVAL;
+ }
+ }
+ }
+
+ return -EINPROGRESS;
+}
+
+static int atmel_set_mode(struct net_device *dev,
+ struct iw_request_info *info,
+ __u32 *uwrq,
+ char *extra)
+{
+ struct atmel_private *priv = netdev_priv(dev);
+
+ if (*uwrq != IW_MODE_ADHOC && *uwrq != IW_MODE_INFRA)
+ return -EINVAL;
+
+ priv->operating_mode = *uwrq;
+ return -EINPROGRESS;
+}
+
+static int atmel_get_mode(struct net_device *dev,
+ struct iw_request_info *info,
+ __u32 *uwrq,
+ char *extra)
+{
+ struct atmel_private *priv = netdev_priv(dev);
+
+ *uwrq = priv->operating_mode;
+ return 0;
+}
+
+static int atmel_get_rate(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *vwrq,
+ char *extra)
+{
+ struct atmel_private *priv = netdev_priv(dev);
+
+ if (priv->auto_tx_rate) {
+ vwrq->fixed = 0;
+ vwrq->value = 11000000;
+ } else {
+ vwrq->fixed = 1;
+ switch(priv->tx_rate) {
+ case 0: vwrq->value = 1000000; break;
+ case 1: vwrq->value = 2000000; break;
+ case 2: vwrq->value = 5500000; break;
+ case 3: vwrq->value = 11000000; break;
+ }
+ }
+ return 0;
+}
+
+static int atmel_set_power(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *vwrq,
+ char *extra)
+{
+ struct atmel_private *priv = netdev_priv(dev);
+ priv->power_mode = vwrq->disabled ? 0 : 1;
+ return -EINPROGRESS;
+}
+
+static int atmel_get_power(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *vwrq,
+ char *extra)
+{
+ struct atmel_private *priv = netdev_priv(dev);
+ vwrq->disabled = priv->power_mode ? 0 : 1;
+ vwrq->flags = IW_POWER_ON;
+ return 0;
+}
+
+static int atmel_set_retry(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *vwrq,
+ char *extra)
+{
+ struct atmel_private *priv = netdev_priv(dev);
+
+ if(!vwrq->disabled && (vwrq->flags & IW_RETRY_LIMIT)) {
+ if(vwrq->flags & IW_RETRY_MAX)
+ priv->long_retry = vwrq->value;
+ else if (vwrq->flags & IW_RETRY_MIN)
+ priv->short_retry = vwrq->value;
+ else {
+ /* No modifier : set both */
+ priv->long_retry = vwrq->value;
+ priv->short_retry = vwrq->value;
+ }
+ return -EINPROGRESS;
+ }
+
+ return -EINVAL;
+}
+
+static int atmel_get_retry(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *vwrq,
+ char *extra)
+{
+ struct atmel_private *priv = netdev_priv(dev);
+
+ vwrq->disabled = 0; /* Can't be disabled */
+
+ /* Note : by default, display the min retry number */
+ if((vwrq->flags & IW_RETRY_MAX)) {
+ vwrq->flags = IW_RETRY_LIMIT | IW_RETRY_MAX;
+ vwrq->value = priv->long_retry;
+ } else {
+ vwrq->flags = IW_RETRY_LIMIT;
+ vwrq->value = priv->short_retry;
+ if(priv->long_retry != priv->short_retry)
+ vwrq->flags |= IW_RETRY_MIN;
+ }
+
+ return 0;
+}
+
+static int atmel_set_rts(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *vwrq,
+ char *extra)
+{
+ struct atmel_private *priv = netdev_priv(dev);
+ int rthr = vwrq->value;
+
+ if(vwrq->disabled)
+ rthr = 2347;
+ if((rthr < 0) || (rthr > 2347)) {
+ return -EINVAL;
+ }
+ priv->rts_threshold = rthr;
+
+ return -EINPROGRESS; /* Call commit handler */
+}
+
+static int atmel_get_rts(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *vwrq,
+ char *extra)
+{
+ struct atmel_private *priv = netdev_priv(dev);
+
+ vwrq->value = priv->rts_threshold;
+ vwrq->disabled = (vwrq->value >= 2347);
+ vwrq->fixed = 1;
+
+ return 0;
+}
+
+static int atmel_set_frag(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *vwrq,
+ char *extra)
+{
+ struct atmel_private *priv = netdev_priv(dev);
+ int fthr = vwrq->value;
+
+ if(vwrq->disabled)
+ fthr = 2346;
+ if((fthr < 256) || (fthr > 2346)) {
+ return -EINVAL;
+ }
+ fthr &= ~0x1; /* Get an even value - is it really needed ??? */
+ priv->frag_threshold = fthr;
+
+ return -EINPROGRESS; /* Call commit handler */
+}
+
+static int atmel_get_frag(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *vwrq,
+ char *extra)
+{
+ struct atmel_private *priv = netdev_priv(dev);
+
+ vwrq->value = priv->frag_threshold;
+ vwrq->disabled = (vwrq->value >= 2346);
+ vwrq->fixed = 1;
+
+ return 0;
+}
+
+static const long frequency_list[] = { 2412, 2417, 2422, 2427, 2432, 2437, 2442,
+ 2447, 2452, 2457, 2462, 2467, 2472, 2484 };
+
+static int atmel_set_freq(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_freq *fwrq,
+ char *extra)
+{
+ struct atmel_private *priv = netdev_priv(dev);
+ int rc = -EINPROGRESS; /* Call commit handler */
+
+ /* If setting by frequency, convert to a channel */
+ if((fwrq->e == 1) &&
+ (fwrq->m >= (int) 241200000) &&
+ (fwrq->m <= (int) 248700000)) {
+ int f = fwrq->m / 100000;
+ int c = 0;
+ while((c < 14) && (f != frequency_list[c]))
+ c++;
+ /* Hack to fall through... */
+ fwrq->e = 0;
+ fwrq->m = c + 1;
+ }
+ /* Setting by channel number */
+ if((fwrq->m > 1000) || (fwrq->e > 0))
+ rc = -EOPNOTSUPP;
+ else {
+ int channel = fwrq->m;
+ if (atmel_validate_channel(priv, channel) == 0) {
+ priv->channel = channel;
+ } else {
+ rc = -EINVAL;
+ }
+ }
+ return rc;
+}
+
+static int atmel_get_freq(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_freq *fwrq,
+ char *extra)
+{
+ struct atmel_private *priv = netdev_priv(dev);
+
+ fwrq->m = priv->channel;
+ fwrq->e = 0;
+ return 0;
+}
+
+static int atmel_set_scan(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_param *vwrq,
+ char *extra)
+{
+ struct atmel_private *priv = netdev_priv(dev);
+ unsigned long flags;
+
+ /* Note : you may have realised that, as this is a SET operation,
+ * this is privileged and therefore a normal user can't
+ * perform scanning.
+ * This is not an error, while the device perform scanning,
+ * traffic doesn't flow, so it's a perfect DoS...
+ * Jean II */
+
+ if (priv->station_state == STATION_STATE_DOWN)
+ return -EAGAIN;
+
+ /* Timeout old surveys. */
+ if ((jiffies - priv->last_survey) > (20 * HZ))
+ priv->site_survey_state = SITE_SURVEY_IDLE;
+ priv->last_survey = jiffies;
+
+ /* Initiate a scan command */
+ if (priv->site_survey_state == SITE_SURVEY_IN_PROGRESS)
+ return -EBUSY;
+
+ del_timer_sync(&priv->management_timer);
+ spin_lock_irqsave(&priv->irqlock, flags);
+
+ priv->site_survey_state = SITE_SURVEY_IN_PROGRESS;
+ priv->fast_scan = 0;
+ atmel_scan(priv, 0);
+ spin_unlock_irqrestore(&priv->irqlock, flags);
+
+ return 0;
+}
+
+static int atmel_get_scan(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_point *dwrq,
+ char *extra)
+{
+ struct atmel_private *priv = netdev_priv(dev);
+ int i;
+ char *current_ev = extra;
+ struct iw_event iwe;
+
+ if (priv->site_survey_state != SITE_SURVEY_COMPLETED)
+ return -EAGAIN;
+
+ for(i=0; i<priv->BSS_list_entries; i++) {
+ iwe.cmd = SIOCGIWAP;
+ iwe.u.ap_addr.sa_family = ARPHRD_ETHER;
+ memcpy(iwe.u.ap_addr.sa_data, priv->BSSinfo[i].BSSID, 6);
+ current_ev = iwe_stream_add_event(current_ev, extra + IW_SCAN_MAX_DATA, &iwe, IW_EV_ADDR_LEN);
+
+ iwe.u.data.length = priv->BSSinfo[i].SSIDsize;
+ if (iwe.u.data.length > 32)
+ iwe.u.data.length = 32;
+ iwe.cmd = SIOCGIWESSID;
+ iwe.u.data.flags = 1;
+ current_ev = iwe_stream_add_point(current_ev, extra + IW_SCAN_MAX_DATA, &iwe, priv->BSSinfo[i].SSID);
+
+ iwe.cmd = SIOCGIWMODE;
+ iwe.u.mode = priv->BSSinfo[i].BSStype;
+ current_ev = iwe_stream_add_event(current_ev, extra + IW_SCAN_MAX_DATA, &iwe, IW_EV_UINT_LEN);
+
+ iwe.cmd = SIOCGIWFREQ;
+ iwe.u.freq.m = priv->BSSinfo[i].channel;
+ iwe.u.freq.e = 0;
+ current_ev = iwe_stream_add_event(current_ev, extra + IW_SCAN_MAX_DATA, &iwe, IW_EV_FREQ_LEN);
+
+ iwe.cmd = SIOCGIWENCODE;
+ if (priv->BSSinfo[i].UsingWEP)
+ iwe.u.data.flags = IW_ENCODE_ENABLED | IW_ENCODE_NOKEY;
+ else
+ iwe.u.data.flags = IW_ENCODE_DISABLED;
+ iwe.u.data.length = 0;
+ current_ev = iwe_stream_add_point(current_ev, extra + IW_SCAN_MAX_DATA, &iwe, NULL);
+
+ }
+
+ /* Length of data */
+ dwrq->length = (current_ev - extra);
+ dwrq->flags = 0;
+
+ return 0;
+}
+
+static int atmel_get_range(struct net_device *dev,
+ struct iw_request_info *info,
+ struct iw_point *dwrq,
+ char *extra)
+{
+ struct atmel_private *priv = netdev_priv(dev);
+ struct iw_range *range = (struct iw_range *) extra;
+ int k,i,j;
+
+ dwrq->length = sizeof(struct iw_range);
+ memset(range, 0, sizeof(range));
+ range->min_nwid = 0x0000;
+ range->max_nwid = 0x0000;
+ range->num_channels = 0;
+ for (j = 0; j < sizeof(channel_table)/sizeof(channel_table[0]); j++)
+ if (priv->reg_domain == channel_table[j].reg_domain) {
+ range->num_channels = channel_table[j].max - channel_table[j].min + 1;
+ break;
+ }
+ if (range->num_channels != 0) {
+ for(k = 0, i = channel_table[j].min; i <= channel_table[j].max; i++) {
+ range->freq[k].i = i; /* List index */
+ range->freq[k].m = frequency_list[i-1] * 100000;
+ range->freq[k++].e = 1; /* Values in table in MHz -> * 10^5 * 10 */
+ }
+ range->num_frequency = k;
+ }
+
+ range->max_qual.qual = 100;
+ range->max_qual.level = 100;
+ range->max_qual.noise = 0;
+ range->max_qual.updated = IW_QUAL_NOISE_INVALID;
+
+ range->avg_qual.qual = 50;
+ range->avg_qual.level = 50;
+ range->avg_qual.noise = 0;
+ range->avg_qual.updated = IW_QUAL_NOISE_INVALID;
+
+ range->sensitivity = 0;
+
+ range->bitrate[0] = 1000000;
+ range->bitrate[1] = 2000000;
+ range->bitrate[2] = 5500000;
+ range->bitrate[3] = 11000000;
+ range->num_bitrates = 4;
+
+ range->min_rts = 0;
+ range->max_rts = 2347;
+ range->min_frag = 256;
+ range->max_frag = 2346;
+
+ range->encoding_size[0] = 5;
+ range->encoding_size[1] = 13;
+ range->num_encoding_sizes = 2;
+ range->max_encoding_tokens = 4;
+
+ range->pmp_flags = IW_POWER_ON;
+ range->pmt_flags = IW_POWER_ON;
+ range->pm_capa = 0;
+
+ range->we_version_source = WIRELESS_EXT;
+ range->we_version_compiled = WIRELESS_EXT;
+ range->retry_capa = IW_RETRY_LIMIT ;
+ range->retry_flags = IW_RETRY_LIMIT;
+ range->r_time_flags = 0;
+ range->min_retry = 1;
+ range->max_retry = 65535;
+
+ return 0;
+}
+
+static int atmel_set_wap(struct net_device *dev,
+ struct iw_request_info *info,
+ struct sockaddr *awrq,
+ char *extra)
+{
+ struct atmel_private *priv = netdev_priv(dev);
+ int i;
+ static const u8 bcast[] = { 255, 255, 255, 255, 255, 255 };
+ unsigned long flags;
+
+ if (awrq->sa_family != ARPHRD_ETHER)
+ return -EINVAL;
+
+ if (memcmp(bcast, awrq->sa_data, 6) == 0) {
+ del_timer_sync(&priv->management_timer);
+ spin_lock_irqsave(&priv->irqlock, flags);
+ atmel_scan(priv, 1);
+ spin_unlock_irqrestore(&priv->irqlock, flags);
+ return 0;
+ }
+
+ for(i=0; i<priv->BSS_list_entries; i++) {
+ if (memcmp(priv->BSSinfo[i].BSSID, awrq->sa_data, 6) == 0) {
+ if (!priv->wep_is_on && priv->BSSinfo[i].UsingWEP) {
+ return -EINVAL;
+ } else if (priv->wep_is_on && !priv->BSSinfo[i].UsingWEP) {
+ return -EINVAL;
+ } else {
+ del_timer_sync(&priv->management_timer);
+ spin_lock_irqsave(&priv->irqlock, flags);
+ atmel_join_bss(priv, i);
+ spin_unlock_irqrestore(&priv->irqlock, flags);
+ return 0;
+ }
+ }
+ }
+
+ return -EINVAL;
+}
+
+static int atmel_config_commit(struct net_device *dev,
+ struct iw_request_info *info, /* NULL */
+ void *zwrq, /* NULL */
+ char *extra) /* NULL */
+{
+ return atmel_open(dev);
+}
+
+static const iw_handler atmel_handler[] =
+{
+ (iw_handler) atmel_config_commit, /* SIOCSIWCOMMIT */
+ (iw_handler) atmel_get_name, /* SIOCGIWNAME */
+ (iw_handler) NULL, /* SIOCSIWNWID */
+ (iw_handler) NULL, /* SIOCGIWNWID */
+ (iw_handler) atmel_set_freq, /* SIOCSIWFREQ */
+ (iw_handler) atmel_get_freq, /* SIOCGIWFREQ */
+ (iw_handler) atmel_set_mode, /* SIOCSIWMODE */
+ (iw_handler) atmel_get_mode, /* SIOCGIWMODE */
+ (iw_handler) NULL, /* SIOCSIWSENS */
+ (iw_handler) NULL, /* SIOCGIWSENS */
+ (iw_handler) NULL, /* SIOCSIWRANGE */
+ (iw_handler) atmel_get_range, /* SIOCGIWRANGE */
+ (iw_handler) NULL, /* SIOCSIWPRIV */
+ (iw_handler) NULL, /* SIOCGIWPRIV */
+ (iw_handler) NULL, /* SIOCSIWSTATS */
+ (iw_handler) NULL, /* SIOCGIWSTATS */
+ (iw_handler) NULL, /* SIOCSIWSPY */
+ (iw_handler) NULL, /* SIOCGIWSPY */
+ (iw_handler) NULL, /* -- hole -- */
+ (iw_handler) NULL, /* -- hole -- */
+ (iw_handler) atmel_set_wap, /* SIOCSIWAP */
+ (iw_handler) atmel_get_wap, /* SIOCGIWAP */
+ (iw_handler) NULL, /* -- hole -- */
+ (iw_handler) NULL, /* SIOCGIWAPLIST */
+ (iw_handler) atmel_set_scan, /* SIOCSIWSCAN */
+ (iw_handler) atmel_get_scan, /* SIOCGIWSCAN */
+ (iw_handler) atmel_set_essid, /* SIOCSIWESSID */
+ (iw_handler) atmel_get_essid, /* SIOCGIWESSID */
+ (iw_handler) NULL, /* SIOCSIWNICKN */
+ (iw_handler) NULL, /* SIOCGIWNICKN */
+ (iw_handler) NULL, /* -- hole -- */
+ (iw_handler) NULL, /* -- hole -- */
+ (iw_handler) atmel_set_rate, /* SIOCSIWRATE */
+ (iw_handler) atmel_get_rate, /* SIOCGIWRATE */
+ (iw_handler) atmel_set_rts, /* SIOCSIWRTS */
+ (iw_handler) atmel_get_rts, /* SIOCGIWRTS */
+ (iw_handler) atmel_set_frag, /* SIOCSIWFRAG */
+ (iw_handler) atmel_get_frag, /* SIOCGIWFRAG */
+ (iw_handler) NULL, /* SIOCSIWTXPOW */
+ (iw_handler) NULL, /* SIOCGIWTXPOW */
+ (iw_handler) atmel_set_retry, /* SIOCSIWRETRY */
+ (iw_handler) atmel_get_retry, /* SIOCGIWRETRY */
+ (iw_handler) atmel_set_encode, /* SIOCSIWENCODE */
+ (iw_handler) atmel_get_encode, /* SIOCGIWENCODE */
+ (iw_handler) atmel_set_power, /* SIOCSIWPOWER */
+ (iw_handler) atmel_get_power, /* SIOCGIWPOWER */
+};
+
+
+static const iw_handler atmel_private_handler[] =
+{
+ NULL, /* SIOCIWFIRSTPRIV */
+};
+
+typedef struct atmel_priv_ioctl {
+ char id[32];
+ unsigned char __user *data;
+ unsigned short len;
+} atmel_priv_ioctl;
+
+
+#define ATMELFWL SIOCIWFIRSTPRIV
+#define ATMELIDIFC ATMELFWL + 1
+#define ATMELRD ATMELFWL + 2
+#define ATMELMAGIC 0x51807
+#define REGDOMAINSZ 20
+
+static const struct iw_priv_args atmel_private_args[] = {
+/*{ cmd, set_args, get_args, name } */
+ { ATMELFWL, IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | sizeof (atmel_priv_ioctl), IW_PRIV_TYPE_NONE, "atmelfwl" },
+ { ATMELIDIFC, IW_PRIV_TYPE_NONE, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, "atmelidifc" },
+ { ATMELRD, IW_PRIV_TYPE_CHAR | REGDOMAINSZ, IW_PRIV_TYPE_NONE, "regdomain" },
+};
+
+static const struct iw_handler_def atmel_handler_def =
+{
+ .num_standard = sizeof(atmel_handler)/sizeof(iw_handler),
+ .num_private = sizeof(atmel_private_handler)/sizeof(iw_handler),
+ .num_private_args = sizeof(atmel_private_args)/sizeof(struct iw_priv_args),
+ .standard = (iw_handler *) atmel_handler,
+ .private = (iw_handler *) atmel_private_handler,
+ .private_args = (struct iw_priv_args *) atmel_private_args
+};
+
+static int atmel_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+{
+ int i, rc = 0;
+ struct atmel_private *priv = netdev_priv(dev);
+ atmel_priv_ioctl com;
+ struct iwreq *wrq = (struct iwreq *) rq;
+ unsigned char *new_firmware;
+ char domain[REGDOMAINSZ+1];
+
+ switch (cmd) {
+ case SIOCGIWPRIV:
+ if(wrq->u.data.pointer) {
+ /* Set the number of ioctl available */
+ wrq->u.data.length = sizeof(atmel_private_args) / sizeof(atmel_private_args[0]);
+
+ /* Copy structure to the user buffer */
+ if (copy_to_user(wrq->u.data.pointer,
+ (u_char *) atmel_private_args,
+ sizeof(atmel_private_args)))
+ rc = -EFAULT;
+ }
+ break;
+
+ case ATMELIDIFC:
+ wrq->u.param.value = ATMELMAGIC;
+ break;
+
+ case ATMELFWL:
+ if (copy_from_user(&com, rq->ifr_data, sizeof(com))) {
+ rc = -EFAULT;
+ break;
+ }
+
+ if (!capable(CAP_NET_ADMIN)) {
+ rc = -EPERM;
+ break;
+ }
+
+ if (!(new_firmware = kmalloc(com.len, GFP_KERNEL))) {
+ rc = -ENOMEM;
+ break;
+ }
+
+ if (copy_from_user(new_firmware, com.data, com.len)) {
+ kfree(new_firmware);
+ rc = -EFAULT;
+ break;
+ }
+
+ if (priv->firmware)
+ kfree(priv->firmware);
+
+ priv->firmware = new_firmware;
+ priv->firmware_length = com.len;
+ strncpy(priv->firmware_id, com.id, 31);
+ priv->firmware_id[31] = '\0';
+ break;
+
+ case ATMELRD:
+ if (copy_from_user(domain, rq->ifr_data, REGDOMAINSZ)) {
+ rc = -EFAULT;
+ break;
+ }
+
+ if (!capable(CAP_NET_ADMIN)) {
+ rc = -EPERM;
+ break;
+ }
+
+ domain[REGDOMAINSZ] = 0;
+ rc = -EINVAL;
+ for (i = 0; i < sizeof(channel_table)/sizeof(channel_table[0]); i++) {
+ /* strcasecmp doesn't exist in the library */
+ char *a = channel_table[i].name;
+ char *b = domain;
+ while (*a) {
+ char c1 = *a++;
+ char c2 = *b++;
+ if (tolower(c1) != tolower(c2))
+ break;
+ }
+ if (!*a && !*b) {
+ priv->config_reg_domain = channel_table[i].reg_domain;
+ rc = 0;
+ }
+ }
+
+ if (rc == 0 && priv->station_state != STATION_STATE_DOWN)
+ rc = atmel_open(dev);
+ break;
+
+ default:
+ rc = -EOPNOTSUPP;
+ }
+
+ return rc;
+}
+
+struct auth_body {
+ u16 alg;
+ u16 trans_seq;
+ u16 status;
+ u8 el_id;
+ u8 chall_text_len;
+ u8 chall_text[253];
+};
+
+static void atmel_enter_state(struct atmel_private *priv, int new_state)
+{
+ int old_state = priv->station_state;
+
+ if (new_state == old_state)
+ return;
+
+ priv->station_state = new_state;
+
+ if (new_state == STATION_STATE_READY) {
+ netif_start_queue(priv->dev);
+ netif_carrier_on(priv->dev);
+ }
+
+ if (old_state == STATION_STATE_READY) {
+ netif_carrier_off(priv->dev);
+ if (netif_running(priv->dev))
+ netif_stop_queue(priv->dev);
+ priv->last_beacon_timestamp = 0;
+ }
+}
+
+static void atmel_scan(struct atmel_private *priv, int specific_ssid)
+{
+ struct {
+ u8 BSSID[6];
+ u8 SSID[MAX_SSID_LENGTH];
+ u8 scan_type;
+ u8 channel;
+ u16 BSS_type;
+ u16 min_channel_time;
+ u16 max_channel_time;
+ u8 options;
+ u8 SSID_size;
+ } cmd;
+
+ memset(cmd.BSSID, 0xff, 6);
+
+ if (priv->fast_scan) {
+ cmd.SSID_size = priv->SSID_size;
+ memcpy(cmd.SSID, priv->SSID, priv->SSID_size);
+ cmd.min_channel_time = cpu_to_le16(10);
+ cmd.max_channel_time = cpu_to_le16(50);
+ } else {
+ priv->BSS_list_entries = 0;
+ cmd.SSID_size = 0;
+ cmd.min_channel_time = cpu_to_le16(10);
+ cmd.max_channel_time = cpu_to_le16(120);
+ }
+
+ cmd.options = 0;
+
+ if (!specific_ssid)
+ cmd.options |= SCAN_OPTIONS_SITE_SURVEY;
+
+ cmd.channel = (priv->channel & 0x7f);
+ cmd.scan_type = SCAN_TYPE_ACTIVE;
+ cmd.BSS_type = cpu_to_le16(priv->operating_mode == IW_MODE_ADHOC ?
+ BSS_TYPE_AD_HOC : BSS_TYPE_INFRASTRUCTURE);
+
+ atmel_send_command(priv, CMD_Scan, &cmd, sizeof(cmd));
+
+ /* This must come after all hardware access to avoid being messed up
+ by stuff happening in interrupt context after we leave STATE_DOWN */
+ atmel_enter_state(priv, STATION_STATE_SCANNING);
+}
+
+static void join(struct atmel_private *priv, int type)
+{
+ struct {
+ u8 BSSID[6];
+ u8 SSID[MAX_SSID_LENGTH];
+ u8 BSS_type; /* this is a short in a scan command - weird */
+ u8 channel;
+ u16 timeout;
+ u8 SSID_size;
+ u8 reserved;
+ } cmd;
+
+ cmd.SSID_size = priv->SSID_size;
+ memcpy(cmd.SSID, priv->SSID, priv->SSID_size);
+ memcpy(cmd.BSSID, priv->CurrentBSSID, 6);
+ cmd.channel = (priv->channel & 0x7f);
+ cmd.BSS_type = type;
+ cmd.timeout = cpu_to_le16(2000);
+
+ atmel_send_command(priv, CMD_Join, &cmd, sizeof(cmd));
+}
+
+
+static void start(struct atmel_private *priv, int type)
+{
+ struct {
+ u8 BSSID[6];
+ u8 SSID[MAX_SSID_LENGTH];
+ u8 BSS_type;
+ u8 channel;
+ u8 SSID_size;
+ u8 reserved[3];
+ } cmd;
+
+ cmd.SSID_size = priv->SSID_size;
+ memcpy(cmd.SSID, priv->SSID, priv->SSID_size);
+ memcpy(cmd.BSSID, priv->BSSID, 6);
+ cmd.BSS_type = type;
+ cmd.channel = (priv->channel & 0x7f);
+
+ atmel_send_command(priv, CMD_Start, &cmd, sizeof(cmd));
+}
+
+static void handle_beacon_probe(struct atmel_private *priv, u16 capability, u8 channel)
+{
+ int rejoin = 0;
+ int new = capability & C80211_MGMT_CAPABILITY_ShortPreamble ?
+ SHORT_PREAMBLE : LONG_PREAMBLE;
+
+ if (priv->preamble != new) {
+ priv->preamble = new;
+ rejoin = 1;
+ atmel_set_mib8(priv, Local_Mib_Type, LOCAL_MIB_PREAMBLE_TYPE, new);
+ }
+
+ if (priv->channel != channel) {
+ priv->channel = channel;
+ rejoin = 1;
+ atmel_set_mib8(priv, Phy_Mib_Type, PHY_MIB_CHANNEL_POS, channel);
+ }
+
+ if (rejoin) {
+ priv->station_is_associated = 0;
+ atmel_enter_state(priv, STATION_STATE_JOINNING);
+
+ if (priv->operating_mode == IW_MODE_INFRA)
+ join(priv, BSS_TYPE_INFRASTRUCTURE);
+ else
+ join(priv, BSS_TYPE_AD_HOC);
+ }
+}
+
+
+static void send_authentication_request(struct atmel_private *priv, u8 *challenge, int challenge_len)
+{
+ struct ieee802_11_hdr header;
+ struct auth_body auth;
+
+ header.frame_ctl = cpu_to_le16(IEEE802_11_FTYPE_MGMT | IEEE802_11_STYPE_AUTH);
+ header.duration_id = cpu_to_le16(0x8000);
+ header.seq_ctl = 0;
+ memcpy(header.addr1, priv->CurrentBSSID, 6);
+ memcpy(header.addr2, priv->dev->dev_addr, 6);
+ memcpy(header.addr3, priv->CurrentBSSID, 6);
+
+ if (priv->wep_is_on) {
+ auth.alg = cpu_to_le16(C80211_MGMT_AAN_SHAREDKEY);
+ /* no WEP for authentication frames with TrSeqNo 1 */
+ if (priv->CurrentAuthentTransactionSeqNum != 1)
+ header.frame_ctl |= cpu_to_le16(IEEE802_11_FCTL_WEP);
+ } else {
+ auth.alg = cpu_to_le16(C80211_MGMT_AAN_OPENSYSTEM);
+ }
+
+ auth.status = 0;
+ auth.trans_seq = cpu_to_le16(priv->CurrentAuthentTransactionSeqNum);
+ priv->ExpectedAuthentTransactionSeqNum = priv->CurrentAuthentTransactionSeqNum+1;
+ priv->CurrentAuthentTransactionSeqNum += 2;
+
+ if (challenge_len != 0) {
+ auth.el_id = 16; /* challenge_text */
+ auth.chall_text_len = challenge_len;
+ memcpy(auth.chall_text, challenge, challenge_len);
+ atmel_transmit_management_frame(priv, &header, (u8 *)&auth, 8 + challenge_len);
+ } else {
+ atmel_transmit_management_frame(priv, &header, (u8 *)&auth, 6);
+ }
+}
+
+static void send_association_request(struct atmel_private *priv, int is_reassoc)
+{
+ u8 *ssid_el_p;
+ int bodysize;
+ struct ieee802_11_hdr header;
+ struct ass_req_format {
+ u16 capability;
+ u16 listen_interval;
+ u8 ap[6]; /* nothing after here directly accessible */
+ u8 ssid_el_id;
+ u8 ssid_len;
+ u8 ssid[MAX_SSID_LENGTH];
+ u8 sup_rates_el_id;
+ u8 sup_rates_len;
+ u8 rates[4];
+ } body;
+
+ header.frame_ctl = cpu_to_le16(IEEE802_11_FTYPE_MGMT |
+ (is_reassoc ? IEEE802_11_STYPE_REASSOC_REQ : IEEE802_11_STYPE_ASSOC_REQ));
+ header.duration_id = cpu_to_le16(0x8000);
+ header.seq_ctl = 0;
+
+ memcpy(header.addr1, priv->CurrentBSSID, 6);
+ memcpy(header.addr2, priv->dev->dev_addr, 6);
+ memcpy(header.addr3, priv->CurrentBSSID, 6);
+
+ body.capability = cpu_to_le16(C80211_MGMT_CAPABILITY_ESS);
+ if (priv->wep_is_on)
+ body.capability |= cpu_to_le16(C80211_MGMT_CAPABILITY_Privacy);
+ if (priv->preamble == SHORT_PREAMBLE)
+ body.capability |= cpu_to_le16(C80211_MGMT_CAPABILITY_ShortPreamble);
+
+ body.listen_interval = cpu_to_le16(priv->listen_interval * priv->beacon_period);
+
+ /* current AP address - only in reassoc frame */
+ if (is_reassoc) {
+ memcpy(body.ap, priv->CurrentBSSID, 6);
+ ssid_el_p = (u8 *)&body.ssid_el_id;
+ bodysize = 18 + priv->SSID_size;
+ } else {
+ ssid_el_p = (u8 *)&body.ap[0];
+ bodysize = 12 + priv->SSID_size;
+ }
+
+ ssid_el_p[0]= C80211_MGMT_ElementID_SSID;
+ ssid_el_p[1] = priv->SSID_size;
+ memcpy(ssid_el_p + 2, priv->SSID, priv->SSID_size);
+ ssid_el_p[2 + priv->SSID_size] = C80211_MGMT_ElementID_SupportedRates;
+ ssid_el_p[3 + priv->SSID_size] = 4; /* len of suported rates */
+ memcpy(ssid_el_p + 4 + priv->SSID_size, atmel_basic_rates, 4);
+
+ atmel_transmit_management_frame(priv, &header, (void *)&body, bodysize);
+}
+
+static int is_frame_from_current_bss(struct atmel_private *priv, struct ieee802_11_hdr *header)
+{
+ if (le16_to_cpu(header->frame_ctl) & IEEE802_11_FCTL_FROMDS)
+ return memcmp(header->addr3, priv->CurrentBSSID, 6) == 0;
+ else
+ return memcmp(header->addr2, priv->CurrentBSSID, 6) == 0;
+}
+
+static int retrieve_bss(struct atmel_private *priv)
+{
+ int i;
+ int max_rssi = -128;
+ int max_index = -1;
+
+ if (priv->BSS_list_entries == 0)
+ return -1;
+
+ if (priv->connect_to_any_BSS) {
+ /* Select a BSS with the max-RSSI but of the same type and of the same WEP mode
+ and that it is not marked as 'bad' (i.e. we had previously failed to connect to
+ this BSS with the settings that we currently use) */
+ priv->current_BSS = 0;
+ for(i=0; i<priv->BSS_list_entries; i++) {
+ if (priv->operating_mode == priv->BSSinfo[i].BSStype &&
+ ((!priv->wep_is_on && !priv->BSSinfo[i].UsingWEP) ||
+ (priv->wep_is_on && priv->BSSinfo[i].UsingWEP)) &&
+ !(priv->BSSinfo[i].channel & 0x80)) {
+ max_rssi = priv->BSSinfo[i].RSSI;
+ priv->current_BSS = max_index = i;
+ }
+
+ }
+ return max_index;
+ }
+
+ for(i=0; i<priv->BSS_list_entries; i++) {
+ if (priv->SSID_size == priv->BSSinfo[i].SSIDsize &&
+ memcmp(priv->SSID, priv->BSSinfo[i].SSID, priv->SSID_size) == 0 &&
+ priv->operating_mode == priv->BSSinfo[i].BSStype &&
+ atmel_validate_channel(priv, priv->BSSinfo[i].channel) == 0) {
+ if (priv->BSSinfo[i].RSSI >= max_rssi) {
+ max_rssi = priv->BSSinfo[i].RSSI;
+ max_index = i;
+ }
+ }
+ }
+ return max_index;
+}
+
+
+static void store_bss_info(struct atmel_private *priv, struct ieee802_11_hdr *header,
+ u16 capability, u16 beacon_period, u8 channel, u8 rssi,
+ u8 ssid_len, u8 *ssid, int is_beacon)
+{
+ u8 *bss = capability & C80211_MGMT_CAPABILITY_ESS ? header->addr2 : header->addr3;
+ int i, index;
+
+ for (index = -1, i = 0; i < priv->BSS_list_entries; i++)
+ if (memcmp(bss, priv->BSSinfo[i].BSSID, 6) == 0)
+ index = i;
+
+ /* If we process a probe and an entry from this BSS exists
+ we will update the BSS entry with the info from this BSS.
+ If we process a beacon we will only update RSSI */
+
+ if (index == -1) {
+ if (priv->BSS_list_entries == MAX_BSS_ENTRIES)
+ return;
+ index = priv->BSS_list_entries++;
+ memcpy(priv->BSSinfo[index].BSSID, bss, 6);
+ priv->BSSinfo[index].RSSI = rssi;
+ } else {
+ if (rssi > priv->BSSinfo[index].RSSI)
+ priv->BSSinfo[index].RSSI = rssi;
+ if (is_beacon)
+ return;
+ }
+
+ priv->BSSinfo[index].channel = channel;
+ priv->BSSinfo[index].beacon_period = beacon_period;
+ priv->BSSinfo[index].UsingWEP = capability & C80211_MGMT_CAPABILITY_Privacy;
+ memcpy(priv->BSSinfo[index].SSID, ssid, ssid_len);
+ priv->BSSinfo[index].SSIDsize = ssid_len;
+
+ if (capability & C80211_MGMT_CAPABILITY_IBSS)
+ priv->BSSinfo[index].BSStype = IW_MODE_ADHOC;
+ else if (capability & C80211_MGMT_CAPABILITY_ESS)
+ priv->BSSinfo[index].BSStype =IW_MODE_INFRA;
+
+ priv->BSSinfo[index].preamble = capability & C80211_MGMT_CAPABILITY_ShortPreamble ?
+ SHORT_PREAMBLE : LONG_PREAMBLE;
+}
+
+static void authenticate(struct atmel_private *priv, u16 frame_len)
+{
+ struct auth_body *auth = (struct auth_body *)priv->rx_buf;
+ u16 status = le16_to_cpu(auth->status);
+ u16 trans_seq_no = le16_to_cpu(auth->trans_seq);
+
+ if (status == C80211_MGMT_SC_Success && !priv->wep_is_on) {
+ /* no WEP */
+ if (priv->station_was_associated) {
+ atmel_enter_state(priv, STATION_STATE_REASSOCIATING);
+ send_association_request(priv, 1);
+ return;
+ } else {
+ atmel_enter_state(priv, STATION_STATE_ASSOCIATING);
+ send_association_request(priv, 0);
+ return;
+ }
+ }
+
+ if (status == C80211_MGMT_SC_Success && priv->wep_is_on) {
+ /* WEP */
+ if (trans_seq_no != priv->ExpectedAuthentTransactionSeqNum)
+ return;
+
+ if (trans_seq_no == 0x0002 &&
+ auth->el_id == C80211_MGMT_ElementID_ChallengeText) {
+ send_authentication_request(priv, auth->chall_text, auth->chall_text_len);
+ return;
+ }
+
+ if (trans_seq_no == 0x0004) {
+ if(priv->station_was_associated) {
+ atmel_enter_state(priv, STATION_STATE_REASSOCIATING);
+ send_association_request(priv, 1);
+ return;
+ } else {
+ atmel_enter_state(priv, STATION_STATE_ASSOCIATING);
+ send_association_request(priv, 0);
+ return;
+ }
+ }
+ }
+
+ if (status == C80211_MGMT_SC_AuthAlgNotSupported && priv->connect_to_any_BSS) {
+ int bss_index;
+
+ priv->BSSinfo[(int)(priv->current_BSS)].channel |= 0x80;
+
+ if ((bss_index = retrieve_bss(priv)) != -1) {
+ atmel_join_bss(priv, bss_index);
+ return;
+ }
+ }
+
+
+ priv->AuthenticationRequestRetryCnt = 0;
+ atmel_enter_state(priv, STATION_STATE_MGMT_ERROR);
+ priv->station_is_associated = 0;
+}
+
+static void associate(struct atmel_private *priv, u16 frame_len, u16 subtype)
+{
+ struct ass_resp_format {
+ u16 capability;
+ u16 status;
+ u16 ass_id;
+ u8 el_id;
+ u8 length;
+ u8 rates[4];
+ } *ass_resp = (struct ass_resp_format *)priv->rx_buf;
+
+ u16 status = le16_to_cpu(ass_resp->status);
+ u16 ass_id = le16_to_cpu(ass_resp->ass_id);
+ u16 rates_len = ass_resp->length > 4 ? 4 : ass_resp->length;
+
+ if (frame_len < 8 + rates_len)
+ return;
+
+ if (status == C80211_MGMT_SC_Success) {
+ if (subtype == C80211_SUBTYPE_MGMT_ASS_RESPONSE)
+ priv->AssociationRequestRetryCnt = 0;
+ else
+ priv->ReAssociationRequestRetryCnt = 0;
+
+ atmel_set_mib16(priv, Mac_Mgmt_Mib_Type, MAC_MGMT_MIB_STATION_ID_POS, ass_id & 0x3fff);
+ atmel_set_mib(priv, Phy_Mib_Type, PHY_MIB_RATE_SET_POS, ass_resp->rates, rates_len);
+ if (priv->power_mode == 0) {
+ priv->listen_interval = 1;
+ atmel_set_mib8(priv, Mac_Mgmt_Mib_Type, MAC_MGMT_MIB_PS_MODE_POS, ACTIVE_MODE);
+ atmel_set_mib16(priv, Mac_Mgmt_Mib_Type, MAC_MGMT_MIB_LISTEN_INTERVAL_POS, 1);
+ } else {
+ priv->listen_interval = 2;
+ atmel_set_mib8(priv, Mac_Mgmt_Mib_Type, MAC_MGMT_MIB_PS_MODE_POS, PS_MODE);
+ atmel_set_mib16(priv, Mac_Mgmt_Mib_Type, MAC_MGMT_MIB_LISTEN_INTERVAL_POS, 2);
+ }
+
+ priv->station_is_associated = 1;
+ priv->station_was_associated = 1;
+ atmel_enter_state(priv, STATION_STATE_READY);
+ return;
+ }
+
+ if (subtype == C80211_SUBTYPE_MGMT_ASS_RESPONSE &&
+ status != C80211_MGMT_SC_AssDeniedBSSRate &&
+ status != C80211_MGMT_SC_SupportCapabilities &&
+ priv->AssociationRequestRetryCnt < MAX_ASSOCIATION_RETRIES) {
+ mod_timer(&priv->management_timer, jiffies + MGMT_JIFFIES);
+ priv->AssociationRequestRetryCnt++;
+ send_association_request(priv, 0);
+ return;
+ }
+
+ if (subtype == C80211_SUBTYPE_MGMT_REASS_RESPONSE &&
+ status != C80211_MGMT_SC_AssDeniedBSSRate &&
+ status != C80211_MGMT_SC_SupportCapabilities &&
+ priv->AssociationRequestRetryCnt < MAX_ASSOCIATION_RETRIES) {
+ mod_timer(&priv->management_timer, jiffies + MGMT_JIFFIES);
+ priv->ReAssociationRequestRetryCnt++;
+ send_association_request(priv, 1);
+ return;
+ }
+
+ atmel_enter_state(priv, STATION_STATE_MGMT_ERROR);
+ priv->station_is_associated = 0;
+
+ if(priv->connect_to_any_BSS) {
+ int bss_index;
+ priv->BSSinfo[(int)(priv->current_BSS)].channel |= 0x80;
+
+ if ((bss_index = retrieve_bss(priv)) != -1)
+ atmel_join_bss(priv, bss_index);
+
+ }
+}
+
+void atmel_join_bss(struct atmel_private *priv, int bss_index)
+{
+ struct bss_info *bss = &priv->BSSinfo[bss_index];
+
+ memcpy(priv->CurrentBSSID, bss->BSSID, 6);
+ memcpy(priv->SSID, bss->SSID, priv->SSID_size = bss->SSIDsize);
+
+ /* The WPA stuff cares about the current AP address */
+ if (priv->use_wpa)
+ build_wpa_mib(priv);
+
+ /* When switching to AdHoc turn OFF Power Save if needed */
+
+ if (bss->BSStype == IW_MODE_ADHOC &&
+ priv->operating_mode != IW_MODE_ADHOC &&
+ priv->power_mode) {
+ priv->power_mode = 0;
+ priv->listen_interval = 1;
+ atmel_set_mib8(priv, Mac_Mgmt_Mib_Type, MAC_MGMT_MIB_PS_MODE_POS, ACTIVE_MODE);
+ atmel_set_mib16(priv, Mac_Mgmt_Mib_Type, MAC_MGMT_MIB_LISTEN_INTERVAL_POS, 1);
+ }
+
+ priv->operating_mode = bss->BSStype;
+ priv->channel = bss->channel & 0x7f;
+ priv->beacon_period = bss->beacon_period;
+
+ if (priv->preamble != bss->preamble) {
+ priv->preamble = bss->preamble;
+ atmel_set_mib8(priv, Local_Mib_Type, LOCAL_MIB_PREAMBLE_TYPE, bss->preamble);
+ }
+
+ if (!priv->wep_is_on && bss->UsingWEP) {
+ atmel_enter_state(priv, STATION_STATE_MGMT_ERROR);
+ priv->station_is_associated = 0;
+ return;
+ }
+
+ if (priv->wep_is_on && !bss->UsingWEP) {
+ atmel_enter_state(priv, STATION_STATE_MGMT_ERROR);
+ priv->station_is_associated = 0;
+ return;
+ }
+
+ atmel_enter_state(priv, STATION_STATE_JOINNING);
+
+ if (priv->operating_mode == IW_MODE_INFRA)
+ join(priv, BSS_TYPE_INFRASTRUCTURE);
+ else
+ join(priv, BSS_TYPE_AD_HOC);
+}
+
+
+static void restart_search(struct atmel_private *priv)
+{
+ int bss_index;
+
+ if (!priv->connect_to_any_BSS) {
+ atmel_scan(priv, 1);
+ } else {
+ priv->BSSinfo[(int)(priv->current_BSS)].channel |= 0x80;
+
+ if ((bss_index = retrieve_bss(priv)) != -1)
+ atmel_join_bss(priv, bss_index);
+ else
+ atmel_scan(priv, 0);
+
+ }
+}
+
+static void smooth_rssi(struct atmel_private *priv, u8 rssi)
+{
+ u8 old = priv->wstats.qual.level;
+ u8 max_rssi = 42; /* 502-rmfd-revd max by experiment, default for now */
+
+ switch (priv->firmware_type) {
+ case ATMEL_FW_TYPE_502E:
+ max_rssi = 63; /* 502-rmfd-reve max by experiment */
+ break;
+ default:
+ break;
+ }
+
+ rssi = rssi * 100 / max_rssi;
+ if((rssi + old) % 2)
+ priv->wstats.qual.level = ((rssi + old)/2) + 1;
+ else
+ priv->wstats.qual.level = ((rssi + old)/2);
+ priv->wstats.qual.updated |= IW_QUAL_LEVEL_UPDATED;
+ priv->wstats.qual.updated &= ~IW_QUAL_LEVEL_INVALID;
+}
+
+static void atmel_smooth_qual(struct atmel_private *priv)
+{
+ unsigned long time_diff = (jiffies - priv->last_qual)/HZ;
+ while (time_diff--) {
+ priv->last_qual += HZ;
+ priv->wstats.qual.qual = priv->wstats.qual.qual/2;
+ priv->wstats.qual.qual +=
+ priv->beacons_this_sec * priv->beacon_period * (priv->wstats.qual.level + 100) / 4000;
+ priv->beacons_this_sec = 0;
+ }
+ priv->wstats.qual.updated |= IW_QUAL_QUAL_UPDATED;
+ priv->wstats.qual.updated &= ~IW_QUAL_QUAL_INVALID;
+}
+
+/* deals with incoming managment frames. */
+static void atmel_management_frame(struct atmel_private *priv, struct ieee802_11_hdr *header,
+ u16 frame_len, u8 rssi)
+{
+ u16 subtype;
+
+ switch (subtype = le16_to_cpu(header->frame_ctl) & IEEE802_11_FCTL_STYPE) {
+ case C80211_SUBTYPE_MGMT_BEACON :
+ case C80211_SUBTYPE_MGMT_ProbeResponse:
+
+ /* beacon frame has multiple variable-length fields -
+ never let an engineer loose with a data structure design. */
+ {
+ struct beacon_format {
+ u64 timestamp;
+ u16 interval;
+ u16 capability;
+ u8 ssid_el_id;
+ u8 ssid_length;
+ /* ssid here */
+ u8 rates_el_id;
+ u8 rates_length;
+ /* rates here */
+ u8 ds_el_id;
+ u8 ds_length;
+ /* ds here */
+ } *beacon = (struct beacon_format *)priv->rx_buf;
+
+ u8 channel, rates_length, ssid_length;
+ u64 timestamp = le64_to_cpu(beacon->timestamp);
+ u16 beacon_interval = le16_to_cpu(beacon->interval);
+ u16 capability = le16_to_cpu(beacon->capability);
+ u8 *beaconp = priv->rx_buf;
+ ssid_length = beacon->ssid_length;
+ /* this blows chunks. */
+ if (frame_len < 14 || frame_len < ssid_length + 15)
+ return;
+ rates_length = beaconp[beacon->ssid_length + 15];
+ if (frame_len < ssid_length + rates_length + 18)
+ return;
+ if (ssid_length > MAX_SSID_LENGTH)
+ return;
+ channel = beaconp[ssid_length + rates_length + 18];
+
+ if (priv->station_state == STATION_STATE_READY) {
+ smooth_rssi(priv, rssi);
+ if (is_frame_from_current_bss(priv, header)) {
+ priv->beacons_this_sec++;
+ atmel_smooth_qual(priv);
+ if (priv->last_beacon_timestamp) {
+ /* Note truncate this to 32 bits - kernel can't divide a long long */
+ u32 beacon_delay = timestamp - priv->last_beacon_timestamp;
+ int beacons = beacon_delay / (beacon_interval * 1000);
+ if (beacons > 1)
+ priv->wstats.miss.beacon += beacons - 1;
+ }
+ priv->last_beacon_timestamp = timestamp;
+ handle_beacon_probe(priv, capability, channel);
+ }
+ }
+
+ if (priv->station_state == STATION_STATE_SCANNING )
+ store_bss_info(priv, header, capability, beacon_interval, channel,
+ rssi, ssid_length, &beacon->rates_el_id,
+ subtype == C80211_SUBTYPE_MGMT_BEACON) ;
+ }
+ break;
+
+ case C80211_SUBTYPE_MGMT_Authentication:
+
+ if (priv->station_state == STATION_STATE_AUTHENTICATING)
+ authenticate(priv, frame_len);
+
+ break;
+
+ case C80211_SUBTYPE_MGMT_ASS_RESPONSE:
+ case C80211_SUBTYPE_MGMT_REASS_RESPONSE:
+
+ if (priv->station_state == STATION_STATE_ASSOCIATING ||
+ priv->station_state == STATION_STATE_REASSOCIATING)
+ associate(priv, frame_len, subtype);
+
+ break;
+
+ case C80211_SUBTYPE_MGMT_DISASSOSIATION:
+ if (priv->station_is_associated &&
+ priv->operating_mode == IW_MODE_INFRA &&
+ is_frame_from_current_bss(priv, header)) {
+ priv->station_was_associated = 0;
+ priv->station_is_associated = 0;
+
+ atmel_enter_state(priv, STATION_STATE_JOINNING);
+ join(priv, BSS_TYPE_INFRASTRUCTURE);
+ }
+
+ break;
+
+ case C80211_SUBTYPE_MGMT_Deauthentication:
+ if (priv->operating_mode == IW_MODE_INFRA &&
+ is_frame_from_current_bss(priv, header)) {
+ priv->station_was_associated = 0;
+
+ atmel_enter_state(priv, STATION_STATE_JOINNING);
+ join(priv, BSS_TYPE_INFRASTRUCTURE);
+ }
+
+ break;
+ }
+}
+
+/* run when timer expires */
+static void atmel_management_timer(u_long a)
+{
+ struct net_device *dev = (struct net_device *) a;
+ struct atmel_private *priv = netdev_priv(dev);
+ unsigned long flags;
+
+ /* Check if the card has been yanked. */
+ if (priv->card && priv->present_callback &&
+ !(*priv->present_callback)(priv->card))
+ return;
+
+ spin_lock_irqsave(&priv->irqlock, flags);
+
+ switch (priv->station_state) {
+
+ case STATION_STATE_AUTHENTICATING:
+ if (priv->AuthenticationRequestRetryCnt >= MAX_AUTHENTICATION_RETRIES) {
+ atmel_enter_state(priv, STATION_STATE_MGMT_ERROR);
+ priv->station_is_associated = 0;
+ priv->AuthenticationRequestRetryCnt = 0;
+ restart_search(priv);
+ } else {
+ priv->AuthenticationRequestRetryCnt++;
+ priv->CurrentAuthentTransactionSeqNum = 0x0001;
+ mod_timer(&priv->management_timer, jiffies + MGMT_JIFFIES);
+ send_authentication_request(priv, NULL, 0);
+ }
+
+ break;
+
+ case STATION_STATE_ASSOCIATING:
+ if (priv->AssociationRequestRetryCnt == MAX_ASSOCIATION_RETRIES) {
+ atmel_enter_state(priv, STATION_STATE_MGMT_ERROR);
+ priv->station_is_associated = 0;
+ priv->AssociationRequestRetryCnt = 0;
+ restart_search(priv);
+ } else {
+ priv->AssociationRequestRetryCnt++;
+ mod_timer(&priv->management_timer, jiffies + MGMT_JIFFIES);
+ send_association_request(priv, 0);
+ }
+
+ break;
+
+ case STATION_STATE_REASSOCIATING:
+ if (priv->ReAssociationRequestRetryCnt == MAX_ASSOCIATION_RETRIES) {
+ atmel_enter_state(priv, STATION_STATE_MGMT_ERROR);
+ priv->station_is_associated = 0;
+ priv->ReAssociationRequestRetryCnt = 0;
+ restart_search(priv);
+ } else {
+ priv->ReAssociationRequestRetryCnt++;
+ mod_timer(&priv->management_timer, jiffies + MGMT_JIFFIES);
+ send_association_request(priv, 1);
+ }
+
+ break;
+
+ default:
+ break;
+ }
+
+ spin_unlock_irqrestore(&priv->irqlock, flags);
+}
+
+static void atmel_command_irq(struct atmel_private *priv)
+{
+ u8 status = atmel_rmem8(priv, atmel_co(priv, CMD_BLOCK_STATUS_OFFSET));
+ u8 command = atmel_rmem8(priv, atmel_co(priv, CMD_BLOCK_COMMAND_OFFSET));
+ int fast_scan;
+
+ if (status == CMD_STATUS_IDLE ||
+ status == CMD_STATUS_IN_PROGRESS)
+ return;
+
+ switch (command){
+
+ case CMD_Start:
+ if (status == CMD_STATUS_COMPLETE) {
+ priv->station_was_associated = priv->station_is_associated;
+ atmel_get_mib(priv, Mac_Mgmt_Mib_Type, MAC_MGMT_MIB_CUR_BSSID_POS,
+ (u8 *)priv->CurrentBSSID, 6);
+ atmel_enter_state(priv, STATION_STATE_READY);
+ }
+ break;
+
+ case CMD_Scan:
+ fast_scan = priv->fast_scan;
+ priv->fast_scan = 0;
+
+ if (status != CMD_STATUS_COMPLETE) {
+ atmel_scan(priv, 1);
+ } else {
+ int bss_index = retrieve_bss(priv);
+ if (bss_index != -1) {
+ atmel_join_bss(priv, bss_index);
+ } else if (priv->operating_mode == IW_MODE_ADHOC &&
+ priv->SSID_size != 0) {
+ start(priv, BSS_TYPE_AD_HOC);
+ } else {
+ priv->fast_scan = !fast_scan;
+ atmel_scan(priv, 1);
+ }
+ priv->site_survey_state = SITE_SURVEY_COMPLETED;
+ }
+ break;
+
+ case CMD_SiteSurvey:
+ priv->fast_scan = 0;
+
+ if (status != CMD_STATUS_COMPLETE)
+ return;
+
+ priv->site_survey_state = SITE_SURVEY_COMPLETED;
+ if (priv->station_is_associated) {
+ atmel_enter_state(priv, STATION_STATE_READY);
+ } else {
+ atmel_scan(priv, 1);
+ }
+ break;
+
+ case CMD_Join:
+ if (status == CMD_STATUS_COMPLETE) {
+ if (priv->operating_mode == IW_MODE_ADHOC) {
+ priv->station_was_associated = priv->station_is_associated;
+ atmel_enter_state(priv, STATION_STATE_READY);
+ } else {
+ priv->AuthenticationRequestRetryCnt = 0;
+ atmel_enter_state(priv, STATION_STATE_AUTHENTICATING);
+
+ mod_timer(&priv->management_timer, jiffies + MGMT_JIFFIES);
+ priv->CurrentAuthentTransactionSeqNum = 0x0001;
+ send_authentication_request(priv, NULL, 0);
+ }
+ return;
+ }
+
+ atmel_scan(priv, 1);
+
+ }
+}
+
+static int atmel_wakeup_firmware(struct atmel_private *priv)
+{
+ struct host_info_struct *iface = &priv->host_info;
+ u16 mr1, mr3;
+ int i;
+
+ if (priv->card_type == CARD_TYPE_SPI_FLASH)
+ atmel_set_gcr(priv->dev, GCR_REMAP);
+
+ /* wake up on-board processor */
+ atmel_clear_gcr(priv->dev, 0x0040);
+ atmel_write16(priv->dev, BSR, BSS_SRAM);
+
+ if (priv->card_type == CARD_TYPE_SPI_FLASH)
+ mdelay(100);
+
+ /* and wait for it */
+ for (i = LOOP_RETRY_LIMIT; i; i--) {
+ mr1 = atmel_read16(priv->dev, MR1);
+ mr3 = atmel_read16(priv->dev, MR3);
+
+ if (mr3 & MAC_BOOT_COMPLETE)
+ break;
+ if (mr1 & MAC_BOOT_COMPLETE &&
+ priv->bus_type == BUS_TYPE_PCCARD)
+ break;
+ }
+
+ if (i == 0) {
+ printk(KERN_ALERT "%s: MAC failed to boot.\n", priv->dev->name);
+ return 0;
+ }
+
+ if ((priv->host_info_base = atmel_read16(priv->dev, MR2)) == 0xffff) {
+ printk(KERN_ALERT "%s: card missing.\n", priv->dev->name);
+ return 0;
+ }
+
+ /* now check for completion of MAC initialization through
+ the FunCtrl field of the IFACE, poll MR1 to detect completion of
+ MAC initialization, check completion status, set interrupt mask,
+ enables interrupts and calls Tx and Rx initialization functions */
+
+ atmel_wmem8(priv, atmel_hi(priv, IFACE_FUNC_CTRL_OFFSET), FUNC_CTRL_INIT_COMPLETE);
+
+ for (i = LOOP_RETRY_LIMIT; i; i--) {
+ mr1 = atmel_read16(priv->dev, MR1);
+ mr3 = atmel_read16(priv->dev, MR3);
+
+ if (mr3 & MAC_INIT_COMPLETE)
+ break;
+ if (mr1 & MAC_INIT_COMPLETE &&
+ priv->bus_type == BUS_TYPE_PCCARD)
+ break;
+ }
+
+ if (i == 0) {
+ printk(KERN_ALERT "%s: MAC failed to initialise.\n", priv->dev->name);
+ return 0;
+ }
+
+ /* Check for MAC_INIT_OK only on the register that the MAC_INIT_OK was set */
+ if ((mr3 & MAC_INIT_COMPLETE) &&
+ !(atmel_read16(priv->dev, MR3) & MAC_INIT_OK)) {
+ printk(KERN_ALERT "%s: MAC failed MR3 self-test.\n", priv->dev->name);
+ return 0;
+ }
+ if ((mr1 & MAC_INIT_COMPLETE) &&
+ !(atmel_read16(priv->dev, MR1) & MAC_INIT_OK)) {
+ printk(KERN_ALERT "%s: MAC failed MR1 self-test.\n", priv->dev->name);
+ return 0;
+ }
+
+ atmel_copy_to_host(priv->dev, (unsigned char *)iface,
+ priv->host_info_base, sizeof(*iface));
+
+ iface->tx_buff_pos = le16_to_cpu(iface->tx_buff_pos);
+ iface->tx_buff_size = le16_to_cpu(iface->tx_buff_size);
+ iface->tx_desc_pos = le16_to_cpu(iface->tx_desc_pos);
+ iface->tx_desc_count = le16_to_cpu(iface->tx_desc_count);
+ iface->rx_buff_pos = le16_to_cpu(iface->rx_buff_pos);
+ iface->rx_buff_size = le16_to_cpu(iface->rx_buff_size);
+ iface->rx_desc_pos = le16_to_cpu(iface->rx_desc_pos);
+ iface->rx_desc_count = le16_to_cpu(iface->rx_desc_count);
+ iface->build_version = le16_to_cpu(iface->build_version);
+ iface->command_pos = le16_to_cpu(iface->command_pos);
+ iface->major_version = le16_to_cpu(iface->major_version);
+ iface->minor_version = le16_to_cpu(iface->minor_version);
+ iface->func_ctrl = le16_to_cpu(iface->func_ctrl);
+ iface->mac_status = le16_to_cpu(iface->mac_status);
+
+ return 1;
+}
+
+/* determine type of memory and MAC address */
+static int probe_atmel_card(struct net_device *dev)
+{
+ int rc = 0;
+ struct atmel_private *priv = netdev_priv(dev);
+
+ /* reset pccard */
+ if (priv->bus_type == BUS_TYPE_PCCARD)
+ atmel_write16(dev, GCR, 0x0060);
+
+ atmel_write16(dev, GCR, 0x0040);
+ mdelay(500);
+
+ if (atmel_read16(dev, MR2) == 0) {
+ /* No stored firmware so load a small stub which just
+ tells us the MAC address */
+ int i;
+ priv->card_type = CARD_TYPE_EEPROM;
+ atmel_write16(dev, BSR, BSS_IRAM);
+ atmel_copy_to_card(dev, 0, mac_reader, sizeof(mac_reader));
+ atmel_set_gcr(dev, GCR_REMAP);
+ atmel_clear_gcr(priv->dev, 0x0040);
+ atmel_write16(dev, BSR, BSS_SRAM);
+ for (i = LOOP_RETRY_LIMIT; i; i--)
+ if (atmel_read16(dev, MR3) & MAC_BOOT_COMPLETE)
+ break;
+ if (i == 0) {
+ printk(KERN_ALERT "%s: MAC failed to boot MAC address reader.\n", dev->name);
+ } else {
+ atmel_copy_to_host(dev, dev->dev_addr, atmel_read16(dev, MR2), 6);
+ /* got address, now squash it again until the network
+ interface is opened */
+ if (priv->bus_type == BUS_TYPE_PCCARD)
+ atmel_write16(dev, GCR, 0x0060);
+ atmel_write16(dev, GCR, 0x0040);
+ rc = 1;
+ }
+ } else if (atmel_read16(dev, MR4) == 0) {
+ /* Mac address easy in this case. */
+ priv->card_type = CARD_TYPE_PARALLEL_FLASH;
+ atmel_write16(dev, BSR, 1);
+ atmel_copy_to_host(dev, dev->dev_addr, 0xc000, 6);
+ atmel_write16(dev, BSR, 0x200);
+ rc = 1;
+ } else {
+ /* Standard firmware in flash, boot it up and ask
+ for the Mac Address */
+ priv->card_type = CARD_TYPE_SPI_FLASH;
+ if (atmel_wakeup_firmware(priv)) {
+ atmel_get_mib(priv, Mac_Address_Mib_Type, 0, dev->dev_addr, 6);
+
+ /* got address, now squash it again until the network
+ interface is opened */
+ if (priv->bus_type == BUS_TYPE_PCCARD)
+ atmel_write16(dev, GCR, 0x0060);
+ atmel_write16(dev, GCR, 0x0040);
+ rc = 1;
+ }
+ }
+
+ if (rc) {
+ if (dev->dev_addr[0] == 0xFF) {
+ u8 default_mac[] = {0x00,0x04, 0x25, 0x00, 0x00, 0x00};
+ printk(KERN_ALERT "%s: *** Invalid MAC address. UPGRADE Firmware ****\n", dev->name);
+ memcpy(dev->dev_addr, default_mac, 6);
+ }
+ printk(KERN_INFO "%s: MAC address %.2x:%.2x:%.2x:%.2x:%.2x:%.2x\n",
+ dev->name,
+ dev->dev_addr[0], dev->dev_addr[1], dev->dev_addr[2],
+ dev->dev_addr[3], dev->dev_addr[4], dev->dev_addr[5] );
+
+ }
+
+ return rc;
+}
+
+static void build_wep_mib(struct atmel_private *priv)
+/* Move the encyption information on the MIB structure.
+ This routine is for the pre-WPA firmware: later firmware has
+ a different format MIB and a different routine. */
+{
+ struct { /* NB this is matched to the hardware, don't change. */
+ u8 wep_is_on;
+ u8 default_key; /* 0..3 */
+ u8 reserved;
+ u8 exclude_unencrypted;
+
+ u32 WEPICV_error_count;
+ u32 WEP_excluded_count;
+
+ u8 wep_keys[MAX_ENCRYPTION_KEYS][13];
+ u8 encryption_level; /* 0, 1, 2 */
+ u8 reserved2[3];
+ } mib;
+ int i;
+
+ mib.wep_is_on = priv->wep_is_on;
+ if (priv->wep_is_on) {
+ if (priv->wep_key_len[priv->default_key] > 5)
+ mib.encryption_level = 2;
+ else
+ mib.encryption_level = 1;
+ } else {
+ mib.encryption_level = 0;
+ }
+
+ mib.default_key = priv->default_key;
+ mib.exclude_unencrypted = priv->exclude_unencrypted;
+
+ for(i = 0; i < MAX_ENCRYPTION_KEYS; i++)
+ memcpy(mib.wep_keys[i], priv->wep_keys[i], 13);
+
+ atmel_set_mib(priv, Mac_Wep_Mib_Type, 0, (u8 *)&mib, sizeof(mib));
+}
+
+static void build_wpa_mib(struct atmel_private *priv)
+{
+ /* This is for the later (WPA enabled) firmware. */
+
+ struct { /* NB this is matched to the hardware, don't change. */
+ u8 cipher_default_key_value[MAX_ENCRYPTION_KEYS][MAX_ENCRYPTION_KEY_SIZE];
+ u8 receiver_address[6];
+ u8 wep_is_on;
+ u8 default_key; /* 0..3 */
+ u8 group_key;
+ u8 exclude_unencrypted;
+ u8 encryption_type;
+ u8 reserved;
+
+ u32 WEPICV_error_count;
+ u32 WEP_excluded_count;
+
+ u8 key_RSC[4][8];
+ } mib;
+
+ int i;
+
+ mib.wep_is_on = priv->wep_is_on;
+ mib.exclude_unencrypted = priv->exclude_unencrypted;
+ memcpy(mib.receiver_address, priv->CurrentBSSID, 6);
+
+ /* zero all the keys before adding in valid ones. */
+ memset(mib.cipher_default_key_value, 0, sizeof(mib.cipher_default_key_value));
+
+ if (priv->wep_is_on) {
+ /* There's a comment in the Atmel code to the effect that this is only valid
+ when still using WEP, it may need to be set to something to use WPA */
+ memset(mib.key_RSC, 0, sizeof(mib.key_RSC));
+
+ mib.default_key = mib.group_key = 255;
+ for (i = 0; i < MAX_ENCRYPTION_KEYS; i++) {
+ if (priv->wep_key_len[i] > 0) {
+ memcpy(mib.cipher_default_key_value[i], priv->wep_keys[i], MAX_ENCRYPTION_KEY_SIZE);
+ if (i == priv->default_key) {
+ mib.default_key = i;
+ mib.cipher_default_key_value[i][MAX_ENCRYPTION_KEY_SIZE-1] = 7;
+ mib.cipher_default_key_value[i][MAX_ENCRYPTION_KEY_SIZE-2] = priv->pairwise_cipher_suite;
+ } else {
+ mib.group_key = i;
+ priv->group_cipher_suite = priv->pairwise_cipher_suite;
+ mib.cipher_default_key_value[i][MAX_ENCRYPTION_KEY_SIZE-1] = 1;
+ mib.cipher_default_key_value[i][MAX_ENCRYPTION_KEY_SIZE-2] = priv->group_cipher_suite;
+ }
+ }
+ }
+ if (mib.default_key == 255)
+ mib.default_key = mib.group_key != 255 ? mib.group_key : 0;
+ if (mib.group_key == 255)
+ mib.group_key = mib.default_key;
+
+ }
+
+ atmel_set_mib(priv, Mac_Wep_Mib_Type, 0, (u8 *)&mib, sizeof(mib));
+}
+
+static int reset_atmel_card(struct net_device *dev)
+{
+ /* do everything necessary to wake up the hardware, including
+ waiting for the lightning strike and throwing the knife switch....
+
+ set all the Mib values which matter in the card to match
+ their settings in the atmel_private structure. Some of these
+ can be altered on the fly, but many (WEP, infrastucture or ad-hoc)
+ can only be changed by tearing down the world and coming back through
+ here.
+
+ This routine is also responsible for initialising some
+ hardware-specific fields in the atmel_private structure,
+ including a copy of the firmware's hostinfo stucture
+ which is the route into the rest of the firmare datastructures. */
+
+ struct atmel_private *priv = netdev_priv(dev);
+ u8 configuration;
+
+ /* data to add to the firmware names, in priority order
+ this implemenents firmware versioning */
+
+ static char *firmware_modifier[] = {
+ "-wpa",
+ "",
+ NULL
+ };
+
+ /* reset pccard */
+ if (priv->bus_type == BUS_TYPE_PCCARD)
+ atmel_write16(priv->dev, GCR, 0x0060);
+
+ /* stop card , disable interrupts */
+ atmel_write16(priv->dev, GCR, 0x0040);
+
+ if (priv->card_type == CARD_TYPE_EEPROM) {
+ /* copy in firmware if needed */
+ const struct firmware *fw_entry = NULL;
+ unsigned char *fw;
+ int len = priv->firmware_length;
+ if (!(fw = priv->firmware)) {
+ if (priv->firmware_type == ATMEL_FW_TYPE_NONE) {
+ if (strlen(priv->firmware_id) == 0) {
+ printk(KERN_INFO
+ "%s: card type is unknown: assuming at76c502 firmware is OK.\n",
+ dev->name);
+ printk(KERN_INFO
+ "%s: if not, use the firmware= module parameter.\n",
+ dev->name);
+ strcpy(priv->firmware_id, "atmel_at76c502.bin");
+ }
+ if (request_firmware(&fw_entry, priv->firmware_id, priv->sys_dev) != 0) {
+ printk(KERN_ALERT
+ "%s: firmware %s is missing, cannot continue.\n",
+ dev->name, priv->firmware_id);
+ return 0;
+ }
+ } else {
+ int fw_index = 0;
+ int success = 0;
+
+ /* get firmware filename entry based on firmware type ID */
+ while (fw_table[fw_index].fw_type != priv->firmware_type
+ && fw_table[fw_index].fw_type != ATMEL_FW_TYPE_NONE)
+ fw_index++;
+
+ /* construct the actual firmware file name */
+ if (fw_table[fw_index].fw_type != ATMEL_FW_TYPE_NONE) {
+ int i;
+ for (i = 0; firmware_modifier[i]; i++) {
+ snprintf(priv->firmware_id, 32, "%s%s.%s", fw_table[fw_index].fw_file,
+ firmware_modifier[i], fw_table[fw_index].fw_file_ext);
+ priv->firmware_id[31] = '\0';
+ if (request_firmware(&fw_entry, priv->firmware_id, priv->sys_dev) == 0) {
+ success = 1;
+ break;
+ }
+ }
+ }
+ if (!success) {
+ printk(KERN_ALERT
+ "%s: firmware %s is missing, cannot start.\n",
+ dev->name, priv->firmware_id);
+ priv->firmware_id[0] = '\0';
+ return 0;
+ }
+ }
+
+ fw = fw_entry->data;
+ len = fw_entry->size;
+ }
+
+ if (len <= 0x6000) {
+ atmel_write16(priv->dev, BSR, BSS_IRAM);
+ atmel_copy_to_card(priv->dev, 0, fw, len);
+ atmel_set_gcr(priv->dev, GCR_REMAP);
+ } else {
+ /* Remap */
+ atmel_set_gcr(priv->dev, GCR_REMAP);
+ atmel_write16(priv->dev, BSR, BSS_IRAM);
+ atmel_copy_to_card(priv->dev, 0, fw, 0x6000);
+ atmel_write16(priv->dev, BSR, 0x2ff);
+ atmel_copy_to_card(priv->dev, 0x8000, &fw[0x6000], len - 0x6000);
+ }
+
+ if (fw_entry)
+ release_firmware(fw_entry);
+ }
+
+ if (!atmel_wakeup_firmware(priv))
+ return 0;
+
+ /* Check the version and set the correct flag for wpa stuff,
+ old and new firmware is incompatible.
+ The pre-wpa 3com firmware reports major version 5,
+ the wpa 3com firmware is major version 4 and doesn't need
+ the 3com broken-ness filter. */
+ priv->use_wpa = (priv->host_info.major_version == 4);
+ priv->radio_on_broken = (priv->host_info.major_version == 5);
+
+ /* unmask all irq sources */
+ atmel_wmem8(priv, atmel_hi(priv, IFACE_INT_MASK_OFFSET), 0xff);
+
+ /* int Tx system and enable Tx */
+ atmel_wmem8(priv, atmel_tx(priv, TX_DESC_FLAGS_OFFSET, 0), 0);
+ atmel_wmem32(priv, atmel_tx(priv, TX_DESC_NEXT_OFFSET, 0), 0x80000000L);
+ atmel_wmem16(priv, atmel_tx(priv, TX_DESC_POS_OFFSET, 0), 0);
+ atmel_wmem16(priv, atmel_tx(priv, TX_DESC_SIZE_OFFSET, 0), 0);
+
+ priv->tx_desc_free = priv->host_info.tx_desc_count;
+ priv->tx_desc_head = 0;
+ priv->tx_desc_tail = 0;
+ priv->tx_desc_previous = 0;
+ priv->tx_free_mem = priv->host_info.tx_buff_size;
+ priv->tx_buff_head = 0;
+ priv->tx_buff_tail = 0;
+
+ configuration = atmel_rmem8(priv, atmel_hi(priv, IFACE_FUNC_CTRL_OFFSET));
+ atmel_wmem8(priv, atmel_hi(priv, IFACE_FUNC_CTRL_OFFSET),
+ configuration | FUNC_CTRL_TxENABLE);
+
+ /* init Rx system and enable */
+ priv->rx_desc_head = 0;
+
+ configuration = atmel_rmem8(priv, atmel_hi(priv, IFACE_FUNC_CTRL_OFFSET));
+ atmel_wmem8(priv, atmel_hi(priv, IFACE_FUNC_CTRL_OFFSET),
+ configuration | FUNC_CTRL_RxENABLE);
+
+ if (!priv->radio_on_broken) {
+ if (atmel_send_command_wait(priv, CMD_EnableRadio, NULL, 0) ==
+ CMD_STATUS_REJECTED_RADIO_OFF) {
+ printk(KERN_INFO
+ "%s: cannot turn the radio on. (Hey radio, you're beautiful!)\n",
+ dev->name);
+ return 0;
+ }
+ }
+
+ /* set up enough MIB values to run. */
+ atmel_set_mib8(priv, Local_Mib_Type, LOCAL_MIB_AUTO_TX_RATE_POS, priv->auto_tx_rate);
+ atmel_set_mib8(priv, Local_Mib_Type, LOCAL_MIB_TX_PROMISCUOUS_POS, PROM_MODE_OFF);
+ atmel_set_mib16(priv, Mac_Mib_Type, MAC_MIB_RTS_THRESHOLD_POS, priv->rts_threshold);
+ atmel_set_mib16(priv, Mac_Mib_Type, MAC_MIB_FRAG_THRESHOLD_POS, priv->frag_threshold);
+ atmel_set_mib8(priv, Mac_Mib_Type, MAC_MIB_SHORT_RETRY_POS, priv->short_retry);
+ atmel_set_mib8(priv, Mac_Mib_Type, MAC_MIB_LONG_RETRY_POS, priv->long_retry);
+ atmel_set_mib8(priv, Local_Mib_Type, LOCAL_MIB_PREAMBLE_TYPE, priv->preamble);
+ atmel_set_mib(priv, Mac_Address_Mib_Type, MAC_ADDR_MIB_MAC_ADDR_POS,
+ priv->dev->dev_addr, 6);
+ atmel_set_mib8(priv, Mac_Mgmt_Mib_Type, MAC_MGMT_MIB_PS_MODE_POS, ACTIVE_MODE);
+ atmel_set_mib16(priv, Mac_Mgmt_Mib_Type, MAC_MGMT_MIB_LISTEN_INTERVAL_POS, 1);
+ atmel_set_mib16(priv, Mac_Mgmt_Mib_Type, MAC_MGMT_MIB_BEACON_PER_POS, priv->default_beacon_period);
+ atmel_set_mib(priv, Phy_Mib_Type, PHY_MIB_RATE_SET_POS, atmel_basic_rates, 4);
+ atmel_set_mib8(priv, Mac_Mgmt_Mib_Type, MAC_MGMT_MIB_CUR_PRIVACY_POS, priv->wep_is_on);
+ if (priv->use_wpa)
+ build_wpa_mib(priv);
+ else
+ build_wep_mib(priv);
+
+ return 1;
+}
+
+static void atmel_send_command(struct atmel_private *priv, int command, void *cmd, int cmd_size)
+{
+ if (cmd)
+ atmel_copy_to_card(priv->dev, atmel_co(priv, CMD_BLOCK_PARAMETERS_OFFSET),
+ cmd, cmd_size);
+
+ atmel_wmem8(priv, atmel_co(priv, CMD_BLOCK_COMMAND_OFFSET), command);
+ atmel_wmem8(priv, atmel_co(priv, CMD_BLOCK_STATUS_OFFSET), 0);
+}
+
+static int atmel_send_command_wait(struct atmel_private *priv, int command, void *cmd, int cmd_size)
+{
+ int i, status;
+
+ atmel_send_command(priv, command, cmd, cmd_size);
+
+ for (i = 5000; i; i--) {
+ status = atmel_rmem8(priv, atmel_co(priv, CMD_BLOCK_STATUS_OFFSET));
+ if (status != CMD_STATUS_IDLE &&
+ status != CMD_STATUS_IN_PROGRESS)
+ break;
+ udelay(20);
+ }
+
+ if (i == 0) {
+ printk(KERN_ALERT "%s: failed to contact MAC.\n", priv->dev->name);
+ status = CMD_STATUS_HOST_ERROR;
+ } else {
+ if (command != CMD_EnableRadio)
+ status = CMD_STATUS_COMPLETE;
+ }
+
+ return status;
+}
+
+static u8 atmel_get_mib8(struct atmel_private *priv, u8 type, u8 index)
+{
+ struct get_set_mib m;
+ m.type = type;
+ m.size = 1;
+ m.index = index;
+
+ atmel_send_command_wait(priv, CMD_Get_MIB_Vars, &m, MIB_HEADER_SIZE + 1);
+ return atmel_rmem8(priv, atmel_co(priv, CMD_BLOCK_PARAMETERS_OFFSET + MIB_HEADER_SIZE));
+}
+
+static void atmel_set_mib8(struct atmel_private *priv, u8 type, u8 index, u8 data)
+{
+ struct get_set_mib m;
+ m.type = type;
+ m.size = 1;
+ m.index = index;
+ m.data[0] = data;
+
+ atmel_send_command_wait(priv, CMD_Set_MIB_Vars, &m, MIB_HEADER_SIZE + 1);
+}
+
+static void atmel_set_mib16(struct atmel_private *priv, u8 type, u8 index, u16 data)
+{
+ struct get_set_mib m;
+ m.type = type;
+ m.size = 2;
+ m.index = index;
+ m.data[0] = data;
+ m.data[1] = data >> 8;
+
+ atmel_send_command_wait(priv, CMD_Set_MIB_Vars, &m, MIB_HEADER_SIZE + 2);
+}
+
+static void atmel_set_mib(struct atmel_private *priv, u8 type, u8 index, u8 *data, int data_len)
+{
+ struct get_set_mib m;
+ m.type = type;
+ m.size = data_len;
+ m.index = index;
+
+ if (data_len > MIB_MAX_DATA_BYTES)
+ printk(KERN_ALERT "%s: MIB buffer too small.\n", priv->dev->name);
+
+ memcpy(m.data, data, data_len);
+ atmel_send_command_wait(priv, CMD_Set_MIB_Vars, &m, MIB_HEADER_SIZE + data_len);
+}
+
+static void atmel_get_mib(struct atmel_private *priv, u8 type, u8 index, u8 *data, int data_len)
+{
+ struct get_set_mib m;
+ m.type = type;
+ m.size = data_len;
+ m.index = index;
+
+ if (data_len > MIB_MAX_DATA_BYTES)
+ printk(KERN_ALERT "%s: MIB buffer too small.\n", priv->dev->name);
+
+ atmel_send_command_wait(priv, CMD_Get_MIB_Vars, &m, MIB_HEADER_SIZE + data_len);
+ atmel_copy_to_host(priv->dev, data,
+ atmel_co(priv, CMD_BLOCK_PARAMETERS_OFFSET + MIB_HEADER_SIZE), data_len);
+}
+
+static void atmel_writeAR(struct net_device *dev, u16 data)
+{
+ int i;
+ outw(data, dev->base_addr + AR);
+ /* Address register appears to need some convincing..... */
+ for (i = 0; data != inw(dev->base_addr + AR) && i<10; i++)
+ outw(data, dev->base_addr + AR);
+}
+
+static void atmel_copy_to_card(struct net_device *dev, u16 dest, unsigned char *src, u16 len)
+{
+ int i;
+ atmel_writeAR(dev, dest);
+ if (dest % 2) {
+ atmel_write8(dev, DR, *src);
+ src++; len--;
+ }
+ for (i = len; i > 1 ; i -= 2) {
+ u8 lb = *src++;
+ u8 hb = *src++;
+ atmel_write16(dev, DR, lb | (hb << 8));
+ }
+ if (i)
+ atmel_write8(dev, DR, *src);
+}
+
+static void atmel_copy_to_host(struct net_device *dev, unsigned char *dest, u16 src, u16 len)
+{
+ int i;
+ atmel_writeAR(dev, src);
+ if (src % 2) {
+ *dest = atmel_read8(dev, DR);
+ dest++; len--;
+ }
+ for (i = len; i > 1 ; i -= 2) {
+ u16 hw = atmel_read16(dev, DR);
+ *dest++ = hw;
+ *dest++ = hw >> 8;
+ }
+ if (i)
+ *dest = atmel_read8(dev, DR);
+}
+
+static void atmel_set_gcr(struct net_device *dev, u16 mask)
+{
+ outw(inw(dev->base_addr + GCR) | mask, dev->base_addr + GCR);
+}
+
+static void atmel_clear_gcr(struct net_device *dev, u16 mask)
+{
+ outw(inw(dev->base_addr + GCR) & ~mask, dev->base_addr + GCR);
+}
+
+static int atmel_lock_mac(struct atmel_private *priv)
+{
+ int i, j = 20;
+ retry:
+ for (i = 5000; i; i--) {
+ if (!atmel_rmem8(priv, atmel_hi(priv, IFACE_LOCKOUT_HOST_OFFSET)))
+ break;
+ udelay(20);
+ }
+
+ if (!i) return 0; /* timed out */
+
+ atmel_wmem8(priv, atmel_hi(priv, IFACE_LOCKOUT_MAC_OFFSET), 1);
+ if (atmel_rmem8(priv, atmel_hi(priv, IFACE_LOCKOUT_HOST_OFFSET))) {
+ atmel_wmem8(priv, atmel_hi(priv, IFACE_LOCKOUT_MAC_OFFSET), 0);
+ if (!j--) return 0; /* timed out */
+ goto retry;
+ }
+
+ return 1;
+}
+
+static void atmel_wmem32(struct atmel_private *priv, u16 pos, u32 data)
+{
+ atmel_writeAR(priv->dev, pos);
+ atmel_write16(priv->dev, DR, data); /* card is little-endian */
+ atmel_write16(priv->dev, DR, data >> 16);
+}
+
+/***************************************************************************/
+/* There follows the source form of the MAC address reading firmware */
+/***************************************************************************/
+#if 0
+
+/* Copyright 2003 Matthew T. Russotto */
+/* But derived from the Atmel 76C502 firmware written by Atmel and */
+/* included in "atmel wireless lan drivers" package */
+/**
+ This file is part of net.russotto.AtmelMACFW, hereto referred to
+ as AtmelMACFW
+
+ AtmelMACFW is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License version 2
+ as published by the Free Software Foundation.
+
+ AtmelMACFW is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with AtmelMACFW; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+
+****************************************************************************/
+/* This firmware should work on the 76C502 RFMD, RFMD_D, and RFMD_E */
+/* It will probably work on the 76C504 and 76C502 RFMD_3COM */
+/* It only works on SPI EEPROM versions of the card. */
+
+/* This firmware initializes the SPI controller and clock, reads the MAC */
+/* address from the EEPROM into SRAM, and puts the SRAM offset of the MAC */
+/* address in MR2, and sets MR3 to 0x10 to indicate it is done */
+/* It also puts a complete copy of the EEPROM in SRAM with the offset in */
+/* MR4, for investigational purposes (maybe we can determine chip type */
+/* from that?) */
+
+ .org 0
+ .set MRBASE, 0x8000000
+ .set CPSR_INITIAL, 0xD3 /* IRQ/FIQ disabled, ARM mode, Supervisor state */
+ .set CPSR_USER, 0xD1 /* IRQ/FIQ disabled, ARM mode, USER state */
+ .set SRAM_BASE, 0x02000000
+ .set SP_BASE, 0x0F300000
+ .set UNK_BASE, 0x0F000000 /* Some internal device, but which one? */
+ .set SPI_CGEN_BASE, 0x0E000000 /* Some internal device, but which one? */
+ .set UNK3_BASE, 0x02014000 /* Some internal device, but which one? */
+ .set STACK_BASE, 0x5600
+ .set SP_SR, 0x10
+ .set SP_TDRE, 2 /* status register bit -- TDR empty */
+ .set SP_RDRF, 1 /* status register bit -- RDR full */
+ .set SP_SWRST, 0x80
+ .set SP_SPIEN, 0x1
+ .set SP_CR, 0 /* control register */
+ .set SP_MR, 4 /* mode register */
+ .set SP_RDR, 0x08 /* Read Data Register */
+ .set SP_TDR, 0x0C /* Transmit Data Register */
+ .set SP_CSR0, 0x30 /* chip select registers */
+ .set SP_CSR1, 0x34
+ .set SP_CSR2, 0x38
+ .set SP_CSR3, 0x3C
+ .set NVRAM_CMD_RDSR, 5 /* read status register */
+ .set NVRAM_CMD_READ, 3 /* read data */
+ .set NVRAM_SR_RDY, 1 /* RDY bit. This bit is inverted */
+ .set SPI_8CLOCKS, 0xFF /* Writing this to the TDR doesn't do anything to the
+ serial output, since SO is normally high. But it
+ does cause 8 clock cycles and thus 8 bits to be
+ clocked in to the chip. See Atmel's SPI
+ controller (e.g. AT91M55800) timing and 4K
+ SPI EEPROM manuals */
+
+ .set NVRAM_SCRATCH, 0x02000100 /* arbitrary area for scratchpad memory */
+ .set NVRAM_IMAGE, 0x02000200
+ .set NVRAM_LENGTH, 0x0200
+ .set MAC_ADDRESS_MIB, SRAM_BASE
+ .set MAC_ADDRESS_LENGTH, 6
+ .set MAC_BOOT_FLAG, 0x10
+ .set MR1, 0
+ .set MR2, 4
+ .set MR3, 8
+ .set MR4, 0xC
+RESET_VECTOR:
+ b RESET_HANDLER
+UNDEF_VECTOR:
+ b HALT1
+SWI_VECTOR:
+ b HALT1
+IABORT_VECTOR:
+ b HALT1
+DABORT_VECTOR:
+RESERVED_VECTOR:
+ b HALT1
+IRQ_VECTOR:
+ b HALT1
+FIQ_VECTOR:
+ b HALT1
+HALT1: b HALT1
+RESET_HANDLER:
+ mov r0, #CPSR_INITIAL
+ msr CPSR_c, r0 /* This is probably unnecessary */
+
+/* I'm guessing this is initializing clock generator electronics for SPI */
+ ldr r0, =SPI_CGEN_BASE
+ mov r1, #0
+ mov r1, r1, lsl #3
+ orr r1,r1, #0
+ str r1, [r0]
+ ldr r1, [r0, #28]
+ bic r1, r1, #16
+ str r1, [r0, #28]
+ mov r1, #1
+ str r1, [r0, #8]
+
+ ldr r0, =MRBASE
+ mov r1, #0
+ strh r1, [r0, #MR1]
+ strh r1, [r0, #MR2]
+ strh r1, [r0, #MR3]
+ strh r1, [r0, #MR4]
+
+ mov sp, #STACK_BASE
+ bl SP_INIT
+ mov r0, #10
+ bl DELAY9
+ bl GET_MAC_ADDR
+ bl GET_WHOLE_NVRAM
+ ldr r0, =MRBASE
+ ldr r1, =MAC_ADDRESS_MIB
+ strh r1, [r0, #MR2]
+ ldr r1, =NVRAM_IMAGE
+ strh r1, [r0, #MR4]
+ mov r1, #MAC_BOOT_FLAG
+ strh r1, [r0, #MR3]
+HALT2: b HALT2
+.func Get_Whole_NVRAM, GET_WHOLE_NVRAM
+GET_WHOLE_NVRAM:
+ stmdb sp!, {lr}
+ mov r2, #0 /* 0th bytes of NVRAM */
+ mov r3, #NVRAM_LENGTH
+ mov r1, #0 /* not used in routine */
+ ldr r0, =NVRAM_IMAGE
+ bl NVRAM_XFER
+ ldmia sp!, {lr}
+ bx lr
+.endfunc
+
+.func Get_MAC_Addr, GET_MAC_ADDR
+GET_MAC_ADDR:
+ stmdb sp!, {lr}
+ mov r2, #0x120 /* address of MAC Address within NVRAM */
+ mov r3, #MAC_ADDRESS_LENGTH
+ mov r1, #0 /* not used in routine */
+ ldr r0, =MAC_ADDRESS_MIB
+ bl NVRAM_XFER
+ ldmia sp!, {lr}
+ bx lr
+.endfunc
+.ltorg
+.func Delay9, DELAY9
+DELAY9:
+ adds r0, r0, r0, LSL #3 /* r0 = r0 * 9 */
+DELAYLOOP:
+ beq DELAY9_done
+ subs r0, r0, #1
+ b DELAYLOOP
+DELAY9_done:
+ bx lr
+.endfunc
+
+.func SP_Init, SP_INIT
+SP_INIT:
+ mov r1, #SP_SWRST
+ ldr r0, =SP_BASE
+ str r1, [r0, #SP_CR] /* reset the SPI */
+ mov r1, #0
+ str r1, [r0, #SP_CR] /* release SPI from reset state */
+ mov r1, #SP_SPIEN
+ str r1, [r0, #SP_MR] /* set the SPI to MASTER mode*/
+ str r1, [r0, #SP_CR] /* enable the SPI */
+
+/* My guess would be this turns on the SPI clock */
+ ldr r3, =SPI_CGEN_BASE
+ ldr r1, [r3, #28]
+ orr r1, r1, #0x2000
+ str r1, [r3, #28]
+
+ ldr r1, =0x2000c01
+ str r1, [r0, #SP_CSR0]
+ ldr r1, =0x2000201
+ str r1, [r0, #SP_CSR1]
+ str r1, [r0, #SP_CSR2]
+ str r1, [r0, #SP_CSR3]
+ ldr r1, [r0, #SP_SR]
+ ldr r0, [r0, #SP_RDR]
+ bx lr
+.endfunc
+.func NVRAM_Init, NVRAM_INIT
+NVRAM_INIT:
+ ldr r1, =SP_BASE
+ ldr r0, [r1, #SP_RDR]
+ mov r0, #NVRAM_CMD_RDSR
+ str r0, [r1, #SP_TDR]
+SP_loop1:
+ ldr r0, [r1, #SP_SR]
+ tst r0, #SP_TDRE
+ beq SP_loop1
+
+ mov r0, #SPI_8CLOCKS
+ str r0, [r1, #SP_TDR]
+SP_loop2:
+ ldr r0, [r1, #SP_SR]
+ tst r0, #SP_TDRE
+ beq SP_loop2
+
+ ldr r0, [r1, #SP_RDR]
+SP_loop3:
+ ldr r0, [r1, #SP_SR]
+ tst r0, #SP_RDRF
+ beq SP_loop3
+
+ ldr r0, [r1, #SP_RDR]
+ and r0, r0, #255
+ bx lr
+.endfunc
+
+.func NVRAM_Xfer, NVRAM_XFER
+ /* r0 = dest address */
+ /* r1 = not used */
+ /* r2 = src address within NVRAM */
+ /* r3 = length */
+NVRAM_XFER:
+ stmdb sp!, {r4, r5, lr}
+ mov r5, r0 /* save r0 (dest address) */
+ mov r4, r3 /* save r3 (length) */
+ mov r0, r2, LSR #5 /* SPI memories put A8 in the command field */
+ and r0, r0, #8
+ add r0, r0, #NVRAM_CMD_READ
+ ldr r1, =NVRAM_SCRATCH
+ strb r0, [r1, #0] /* save command in NVRAM_SCRATCH[0] */
+ strb r2, [r1, #1] /* save low byte of source address in NVRAM_SCRATCH[1] */
+_local1:
+ bl NVRAM_INIT
+ tst r0, #NVRAM_SR_RDY
+ bne _local1
+ mov r0, #20
+ bl DELAY9
+ mov r2, r4 /* length */
+ mov r1, r5 /* dest address */
+ mov r0, #2 /* bytes to transfer in command */
+ bl NVRAM_XFER2
+ ldmia sp!, {r4, r5, lr}
+ bx lr
+.endfunc
+
+.func NVRAM_Xfer2, NVRAM_XFER2
+NVRAM_XFER2:
+ stmdb sp!, {r4, r5, r6, lr}
+ ldr r4, =SP_BASE
+ mov r3, #0
+ cmp r0, #0
+ bls _local2
+ ldr r5, =NVRAM_SCRATCH
+_local4:
+ ldrb r6, [r5, r3]
+ str r6, [r4, #SP_TDR]
+_local3:
+ ldr r6, [r4, #SP_SR]
+ tst r6, #SP_TDRE
+ beq _local3
+ add r3, r3, #1
+ cmp r3, r0 /* r0 is # of bytes to send out (command+addr) */
+ blo _local4
+_local2:
+ mov r3, #SPI_8CLOCKS
+ str r3, [r4, #SP_TDR]
+ ldr r0, [r4, #SP_RDR]
+_local5:
+ ldr r0, [r4, #SP_SR]
+ tst r0, #SP_RDRF
+ beq _local5
+ ldr r0, [r4, #SP_RDR] /* what's this byte? It's the byte read while writing the TDR -- nonsense, because the NVRAM doesn't read and write at the same time */
+ mov r0, #0
+ cmp r2, #0 /* r2 is # of bytes to copy in */
+ bls _local6
+_local7:
+ ldr r5, [r4, #SP_SR]
+ tst r5, #SP_TDRE
+ beq _local7
+ str r3, [r4, #SP_TDR] /* r3 has SPI_8CLOCKS */
+_local8:
+ ldr r5, [r4, #SP_SR]
+ tst r5, #SP_RDRF
+ beq _local8
+ ldr r5, [r4, #SP_RDR] /* but didn't we read this byte above? */
+ strb r5, [r1], #1 /* postindexed */
+ add r0, r0, #1
+ cmp r0, r2
+ blo _local7 /* since we don't send another address, the NVRAM must be capable of sequential reads */
+_local6:
+ mov r0, #200
+ bl DELAY9
+ ldmia sp!, {r4, r5, r6, lr}
+ bx lr
+#endif
diff --git a/drivers/net/wireless/atmel.h b/drivers/net/wireless/atmel.h
new file mode 100644
index 0000000..825000e
--- /dev/null
+++ b/drivers/net/wireless/atmel.h
@@ -0,0 +1,43 @@
+/*** -*- linux-c -*- **********************************************************
+
+ Driver for Atmel at76c502 at76c504 and at76c506 wireless cards.
+
+ Copyright 2005 Dan Williams and Red Hat, Inc.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This software is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with Atmel wireless lan drivers; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+
+******************************************************************************/
+
+#ifndef _ATMEL_H
+#define _ATMEL_H
+
+typedef enum {
+ ATMEL_FW_TYPE_NONE = 0,
+ ATMEL_FW_TYPE_502,
+ ATMEL_FW_TYPE_502D,
+ ATMEL_FW_TYPE_502E,
+ ATMEL_FW_TYPE_502_3COM,
+ ATMEL_FW_TYPE_504,
+ ATMEL_FW_TYPE_504_2958,
+ ATMEL_FW_TYPE_504A_2958,
+ ATMEL_FW_TYPE_506
+} AtmelFWType;
+
+struct net_device *init_atmel_card(unsigned short, int, const AtmelFWType, struct device *,
+ int (*present_func)(void *), void * );
+void stop_atmel_card( struct net_device *, int );
+int atmel_open( struct net_device * );
+
+#endif
diff --git a/drivers/net/wireless/atmel_cs.c b/drivers/net/wireless/atmel_cs.c
new file mode 100644
index 0000000..a91b507
--- /dev/null
+++ b/drivers/net/wireless/atmel_cs.c
@@ -0,0 +1,708 @@
+/*** -*- linux-c -*- **********************************************************
+
+ Driver for Atmel at76c502 at76c504 and at76c506 wireless cards.
+
+ Copyright 2000-2001 ATMEL Corporation.
+ Copyright 2003 Simon Kelley.
+
+ This code was developed from version 2.1.1 of the Atmel drivers,
+ released by Atmel corp. under the GPL in December 2002. It also
+ includes code from the Linux aironet drivers (C) Benjamin Reed,
+ and the Linux PCMCIA package, (C) David Hinds.
+
+ For all queries about this code, please contact the current author,
+ Simon Kelley <simon@thekelleys.org.uk> and not Atmel Corporation.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This software is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with Atmel wireless lan drivers; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+
+******************************************************************************/
+
+#include <linux/config.h>
+#ifdef __IN_PCMCIA_PACKAGE__
+#include <pcmcia/k_compat.h>
+#endif
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/netdevice.h>
+#include <linux/moduleparam.h>
+#include <linux/device.h>
+
+#include <pcmcia/version.h>
+#include <pcmcia/cs_types.h>
+#include <pcmcia/cs.h>
+#include <pcmcia/cistpl.h>
+#include <pcmcia/cisreg.h>
+#include <pcmcia/ds.h>
+#include <pcmcia/ciscode.h>
+
+#include <asm/io.h>
+#include <asm/system.h>
+#include <linux/wireless.h>
+
+#include "atmel.h"
+
+/*
+ All the PCMCIA modules use PCMCIA_DEBUG to control debugging. If
+ you do not define PCMCIA_DEBUG at all, all the debug code will be
+ left out. If you compile with PCMCIA_DEBUG=0, the debug code will
+ be present but disabled -- but it can then be enabled for specific
+ modules at load time with a 'pc_debug=#' option to insmod.
+*/
+#ifdef PCMCIA_DEBUG
+static int pc_debug = PCMCIA_DEBUG;
+module_param(pc_debug, int, 0);
+static char *version = "$Revision: 1.2 $";
+#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args);
+#else
+#define DEBUG(n, args...)
+#endif
+
+/*====================================================================*/
+
+MODULE_AUTHOR("Simon Kelley");
+MODULE_DESCRIPTION("Support for Atmel at76c50x 802.11 wireless ethernet cards.");
+MODULE_LICENSE("GPL");
+MODULE_SUPPORTED_DEVICE("Atmel at76c50x PCMCIA cards");
+
+/*====================================================================*/
+
+/*
+ The event() function is this driver's Card Services event handler.
+ It will be called by Card Services when an appropriate card status
+ event is received. The config() and release() entry points are
+ used to configure or release a socket, in response to card
+ insertion and ejection events. They are invoked from the atmel_cs
+ event handler.
+*/
+
+static void atmel_config(dev_link_t *link);
+static void atmel_release(dev_link_t *link);
+static int atmel_event(event_t event, int priority,
+ event_callback_args_t *args);
+
+/*
+ The attach() and detach() entry points are used to create and destroy
+ "instances" of the driver, where each instance represents everything
+ needed to manage one actual PCMCIA card.
+*/
+
+static dev_link_t *atmel_attach(void);
+static void atmel_detach(dev_link_t *);
+
+/*
+ You'll also need to prototype all the functions that will actually
+ be used to talk to your device. See 'pcmem_cs' for a good example
+ of a fully self-sufficient driver; the other drivers rely more or
+ less on other parts of the kernel.
+*/
+
+/*
+ The dev_info variable is the "key" that is used to match up this
+ device driver with appropriate cards, through the card configuration
+ database.
+*/
+
+static dev_info_t dev_info = "atmel_cs";
+
+/*
+ A linked list of "instances" of the atmelnet device. Each actual
+ PCMCIA card corresponds to one device instance, and is described
+ by one dev_link_t structure (defined in ds.h).
+
+ You may not want to use a linked list for this -- for example, the
+ memory card driver uses an array of dev_link_t pointers, where minor
+ device numbers are used to derive the corresponding array index.
+*/
+
+static dev_link_t *dev_list = NULL;
+
+/*
+ A dev_link_t structure has fields for most things that are needed
+ to keep track of a socket, but there will usually be some device
+ specific information that also needs to be kept track of. The
+ 'priv' pointer in a dev_link_t structure can be used to point to
+ a device-specific private data structure, like this.
+
+ A driver needs to provide a dev_node_t structure for each device
+ on a card. In some cases, there is only one device per card (for
+ example, ethernet cards, modems). In other cases, there may be
+ many actual or logical devices (SCSI adapters, memory cards with
+ multiple partitions). The dev_node_t structures need to be kept
+ in a linked list starting at the 'dev' field of a dev_link_t
+ structure. We allocate them in the card's private data structure,
+ because they generally shouldn't be allocated dynamically.
+
+ In this case, we also provide a flag to indicate if a device is
+ "stopped" due to a power management event, or card ejection. The
+ device IO routines can use a flag like this to throttle IO to a
+ card that is not ready to accept it.
+*/
+
+typedef struct local_info_t {
+ dev_node_t node;
+ struct net_device *eth_dev;
+} local_info_t;
+
+/*======================================================================
+
+ atmel_attach() creates an "instance" of the driver, allocating
+ local data structures for one device. The device is registered
+ with Card Services.
+
+ The dev_link structure is initialized, but we don't actually
+ configure the card at this point -- we wait until we receive a
+ card insertion event.
+
+ ======================================================================*/
+
+static dev_link_t *atmel_attach(void)
+{
+ client_reg_t client_reg;
+ dev_link_t *link;
+ local_info_t *local;
+ int ret;
+
+ DEBUG(0, "atmel_attach()\n");
+
+ /* Initialize the dev_link_t structure */
+ link = kmalloc(sizeof(struct dev_link_t), GFP_KERNEL);
+ if (!link) {
+ printk(KERN_ERR "atmel_cs: no memory for new device\n");
+ return NULL;
+ }
+ memset(link, 0, sizeof(struct dev_link_t));
+
+ /* Interrupt setup */
+ link->irq.Attributes = IRQ_TYPE_EXCLUSIVE;
+ link->irq.IRQInfo1 = IRQ_LEVEL_ID;
+ link->irq.Handler = NULL;
+
+ /*
+ General socket configuration defaults can go here. In this
+ client, we assume very little, and rely on the CIS for almost
+ everything. In most clients, many details (i.e., number, sizes,
+ and attributes of IO windows) are fixed by the nature of the
+ device, and can be hard-wired here.
+ */
+ link->conf.Attributes = 0;
+ link->conf.Vcc = 50;
+ link->conf.IntType = INT_MEMORY_AND_IO;
+
+ /* Allocate space for private device-specific data */
+ local = kmalloc(sizeof(local_info_t), GFP_KERNEL);
+ if (!local) {
+ printk(KERN_ERR "atmel_cs: no memory for new device\n");
+ kfree (link);
+ return NULL;
+ }
+ memset(local, 0, sizeof(local_info_t));
+ link->priv = local;
+
+ /* Register with Card Services */
+ link->next = dev_list;
+ dev_list = link;
+ client_reg.dev_info = &dev_info;
+ client_reg.EventMask =
+ CS_EVENT_CARD_INSERTION | CS_EVENT_CARD_REMOVAL |
+ CS_EVENT_RESET_PHYSICAL | CS_EVENT_CARD_RESET |
+ CS_EVENT_PM_SUSPEND | CS_EVENT_PM_RESUME;
+ client_reg.event_handler = &atmel_event;
+ client_reg.Version = 0x0210;
+ client_reg.event_callback_args.client_data = link;
+ ret = pcmcia_register_client(&link->handle, &client_reg);
+ if (ret != 0) {
+ cs_error(link->handle, RegisterClient, ret);
+ atmel_detach(link);
+ return NULL;
+ }
+
+ return link;
+} /* atmel_attach */
+
+/*======================================================================
+
+ This deletes a driver "instance". The device is de-registered
+ with Card Services. If it has been released, all local data
+ structures are freed. Otherwise, the structures will be freed
+ when the device is released.
+
+ ======================================================================*/
+
+static void atmel_detach(dev_link_t *link)
+{
+ dev_link_t **linkp;
+
+ DEBUG(0, "atmel_detach(0x%p)\n", link);
+
+ /* Locate device structure */
+ for (linkp = &dev_list; *linkp; linkp = &(*linkp)->next)
+ if (*linkp == link) break;
+ if (*linkp == NULL)
+ return;
+
+ if (link->state & DEV_CONFIG)
+ atmel_release(link);
+
+ /* Break the link with Card Services */
+ if (link->handle)
+ pcmcia_deregister_client(link->handle);
+
+ /* Unlink device structure, free pieces */
+ *linkp = link->next;
+ if (link->priv)
+ kfree(link->priv);
+ kfree(link);
+}
+
+/*======================================================================
+
+ atmel_config() is scheduled to run after a CARD_INSERTION event
+ is received, to configure the PCMCIA socket, and to make the
+ device available to the system.
+
+ ======================================================================*/
+
+#define CS_CHECK(fn, ret) \
+do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
+
+/* Call-back function to interrogate PCMCIA-specific information
+ about the current existance of the card */
+static int card_present(void *arg)
+{
+ dev_link_t *link = (dev_link_t *)arg;
+ if (link->state & DEV_SUSPEND)
+ return 0;
+ else if (link->state & DEV_PRESENT)
+ return 1;
+
+ return 0;
+}
+
+/* list of cards we know about and their firmware requirements.
+ Go either by Manfid or version strings.
+ Cards not in this list will need a firmware parameter to the module
+ in all probability. Note that the SMC 2632 V2 and V3 have the same
+ manfids, so we ignore those and use the version1 strings. */
+
+static struct {
+ int manf, card;
+ char *ver1;
+ AtmelFWType firmware;
+ char *name;
+} card_table[] = {
+ { 0, 0, "WLAN/802.11b PC CARD", ATMEL_FW_TYPE_502D, "Actiontec 802CAT1" },
+ { 0, 0, "ATMEL/AT76C502AR", ATMEL_FW_TYPE_502, "NoName-RFMD" },
+ { 0, 0, "ATMEL/AT76C502AR_D", ATMEL_FW_TYPE_502D, "NoName-revD" },
+ { 0, 0, "ATMEL/AT76C502AR_E", ATMEL_FW_TYPE_502E, "NoName-revE" },
+ { 0, 0, "ATMEL/AT76C504", ATMEL_FW_TYPE_504, "NoName-504" },
+ { 0, 0, "ATMEL/AT76C504A", ATMEL_FW_TYPE_504A_2958, "NoName-504a-2958" },
+ { 0, 0, "ATMEL/AT76C504_R", ATMEL_FW_TYPE_504_2958, "NoName-504-2958" },
+ { MANFID_3COM, 0x0620, NULL, ATMEL_FW_TYPE_502_3COM, "3com 3CRWE62092B" },
+ { MANFID_3COM, 0x0696, NULL, ATMEL_FW_TYPE_502_3COM, "3com 3CRSHPW196" },
+ { 0, 0, "SMC/2632W-V2", ATMEL_FW_TYPE_502, "SMC 2632W-V2" },
+ { 0, 0, "SMC/2632W", ATMEL_FW_TYPE_502D, "SMC 2632W-V3" },
+ { 0xd601, 0x0007, NULL, ATMEL_FW_TYPE_502, "Sitecom WLAN-011" },
+ { 0x01bf, 0x3302, NULL, ATMEL_FW_TYPE_502E, "Belkin F5D6020-V2" },
+ { 0, 0, "BT/Voyager 1020 Laptop Adapter", ATMEL_FW_TYPE_502, "BT Voyager 1020" },
+ { 0, 0, "IEEE 802.11b/Wireless LAN PC Card", ATMEL_FW_TYPE_502, "Siemens Gigaset PC Card II" },
+ { 0, 0, "CNet/CNWLC 11Mbps Wireless PC Card V-5", ATMEL_FW_TYPE_502E, "CNet CNWLC-811ARL" },
+ { 0, 0, "Wireless/PC_CARD", ATMEL_FW_TYPE_502D, "Planet WL-3552" },
+ { 0, 0, "OEM/11Mbps Wireless LAN PC Card V-3", ATMEL_FW_TYPE_502, "OEM 11Mbps WLAN PCMCIA Card" },
+ { 0, 0, "11WAVE/11WP611AL-E", ATMEL_FW_TYPE_502E, "11WAVE WaveBuddy" },
+ { 0, 0, "LG/LW2100N", ATMEL_FW_TYPE_502E, "LG LW2100N 11Mbps WLAN PCMCIA Card" },
+};
+
+static void atmel_config(dev_link_t *link)
+{
+ client_handle_t handle;
+ tuple_t tuple;
+ cisparse_t parse;
+ local_info_t *dev;
+ int last_fn, last_ret;
+ u_char buf[64];
+ int card_index = -1, done = 0;
+
+ handle = link->handle;
+ dev = link->priv;
+
+ DEBUG(0, "atmel_config(0x%p)\n", link);
+
+ tuple.Attributes = 0;
+ tuple.TupleData = buf;
+ tuple.TupleDataMax = sizeof(buf);
+ tuple.TupleOffset = 0;
+
+ tuple.DesiredTuple = CISTPL_MANFID;
+ if (pcmcia_get_first_tuple(handle, &tuple) == 0) {
+ int i;
+ cistpl_manfid_t *manfid;
+ CS_CHECK(GetTupleData, pcmcia_get_tuple_data(handle, &tuple));
+ CS_CHECK(ParseTuple, pcmcia_parse_tuple(handle, &tuple, &parse));
+ manfid = &(parse.manfid);
+ for (i = 0; i < sizeof(card_table)/sizeof(card_table[0]); i++) {
+ if (!card_table[i].ver1 &&
+ manfid->manf == card_table[i].manf &&
+ manfid->card == card_table[i].card) {
+ card_index = i;
+ done = 1;
+ }
+ }
+ }
+
+ tuple.DesiredTuple = CISTPL_VERS_1;
+ if (!done && (pcmcia_get_first_tuple(handle, &tuple) == 0)) {
+ int i, j, k;
+ cistpl_vers_1_t *ver1;
+ CS_CHECK(GetTupleData, pcmcia_get_tuple_data(handle, &tuple));
+ CS_CHECK(ParseTuple, pcmcia_parse_tuple(handle, &tuple, &parse));
+ ver1 = &(parse.version_1);
+
+ for (i = 0; i < sizeof(card_table)/sizeof(card_table[0]); i++) {
+ for (j = 0; j < ver1->ns; j++) {
+ char *p = card_table[i].ver1;
+ char *q = &ver1->str[ver1->ofs[j]];
+ if (!p)
+ goto mismatch;
+ for (k = 0; k < j; k++) {
+ while ((*p != '\0') && (*p != '/')) p++;
+ if (*p == '\0') {
+ if (*q != '\0')
+ goto mismatch;
+ } else {
+ p++;
+ }
+ }
+ while((*q != '\0') && (*p != '\0') &&
+ (*p != '/') && (*p == *q)) p++, q++;
+ if (((*p != '\0') && *p != '/') || *q != '\0')
+ goto mismatch;
+ }
+ card_index = i;
+ break; /* done */
+
+ mismatch:
+ j = 0; /* dummy stmt to shut up compiler */
+ }
+ }
+
+ /*
+ This reads the card's CONFIG tuple to find its configuration
+ registers.
+ */
+ tuple.DesiredTuple = CISTPL_CONFIG;
+ CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(handle, &tuple));
+ CS_CHECK(GetTupleData, pcmcia_get_tuple_data(handle, &tuple));
+ CS_CHECK(ParseTuple, pcmcia_parse_tuple(handle, &tuple, &parse));
+ link->conf.ConfigBase = parse.config.base;
+ link->conf.Present = parse.config.rmask[0];
+
+ /* Configure card */
+ link->state |= DEV_CONFIG;
+
+ /*
+ In this loop, we scan the CIS for configuration table entries,
+ each of which describes a valid card configuration, including
+ voltage, IO window, memory window, and interrupt settings.
+
+ We make no assumptions about the card to be configured: we use
+ just the information available in the CIS. In an ideal world,
+ this would work for any PCMCIA card, but it requires a complete
+ and accurate CIS. In practice, a driver usually "knows" most of
+ these things without consulting the CIS, and most client drivers
+ will only use the CIS to fill in implementation-defined details.
+ */
+ tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
+ CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(handle, &tuple));
+ while (1) {
+ cistpl_cftable_entry_t dflt = { 0 };
+ cistpl_cftable_entry_t *cfg = &(parse.cftable_entry);
+ if (pcmcia_get_tuple_data(handle, &tuple) != 0 ||
+ pcmcia_parse_tuple(handle, &tuple, &parse) != 0)
+ goto next_entry;
+
+ if (cfg->flags & CISTPL_CFTABLE_DEFAULT) dflt = *cfg;
+ if (cfg->index == 0) goto next_entry;
+ link->conf.ConfigIndex = cfg->index;
+
+ /* Does this card need audio output? */
+ if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
+ link->conf.Attributes |= CONF_ENABLE_SPKR;
+ link->conf.Status = CCSR_AUDIO_ENA;
+ }
+
+ /* Use power settings for Vcc and Vpp if present */
+ /* Note that the CIS values need to be rescaled */
+ if (cfg->vcc.present & (1<<CISTPL_POWER_VNOM))
+ link->conf.Vcc = cfg->vcc.param[CISTPL_POWER_VNOM]/10000;
+ else if (dflt.vcc.present & (1<<CISTPL_POWER_VNOM))
+ link->conf.Vcc = dflt.vcc.param[CISTPL_POWER_VNOM]/10000;
+
+ if (cfg->vpp1.present & (1<<CISTPL_POWER_VNOM))
+ link->conf.Vpp1 = link->conf.Vpp2 =
+ cfg->vpp1.param[CISTPL_POWER_VNOM]/10000;
+ else if (dflt.vpp1.present & (1<<CISTPL_POWER_VNOM))
+ link->conf.Vpp1 = link->conf.Vpp2 =
+ dflt.vpp1.param[CISTPL_POWER_VNOM]/10000;
+
+ /* Do we need to allocate an interrupt? */
+ if (cfg->irq.IRQInfo1 || dflt.irq.IRQInfo1)
+ link->conf.Attributes |= CONF_ENABLE_IRQ;
+
+ /* IO window settings */
+ link->io.NumPorts1 = link->io.NumPorts2 = 0;
+ if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) {
+ cistpl_io_t *io = (cfg->io.nwin) ? &cfg->io : &dflt.io;
+ link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
+ if (!(io->flags & CISTPL_IO_8BIT))
+ link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
+ if (!(io->flags & CISTPL_IO_16BIT))
+ link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
+ link->io.BasePort1 = io->win[0].base;
+ link->io.NumPorts1 = io->win[0].len;
+ if (io->nwin > 1) {
+ link->io.Attributes2 = link->io.Attributes1;
+ link->io.BasePort2 = io->win[1].base;
+ link->io.NumPorts2 = io->win[1].len;
+ }
+ }
+
+ /* This reserves IO space but doesn't actually enable it */
+ if (pcmcia_request_io(link->handle, &link->io) != 0)
+ goto next_entry;
+
+ /* If we got this far, we're cool! */
+ break;
+
+ next_entry:
+ CS_CHECK(GetNextTuple, pcmcia_get_next_tuple(handle, &tuple));
+ }
+
+ /*
+ Allocate an interrupt line. Note that this does not assign a
+ handler to the interrupt, unless the 'Handler' member of the
+ irq structure is initialized.
+ */
+ if (link->conf.Attributes & CONF_ENABLE_IRQ)
+ CS_CHECK(RequestIRQ, pcmcia_request_irq(link->handle, &link->irq));
+
+ /*
+ This actually configures the PCMCIA socket -- setting up
+ the I/O windows and the interrupt mapping, and putting the
+ card and host interface into "Memory and IO" mode.
+ */
+ CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link->handle, &link->conf));
+
+ if (link->irq.AssignedIRQ == 0) {
+ printk(KERN_ALERT
+ "atmel: cannot assign IRQ: check that CONFIG_ISA is set in kernel config.");
+ goto cs_failed;
+ }
+
+ ((local_info_t*)link->priv)->eth_dev =
+ init_atmel_card(link->irq.AssignedIRQ,
+ link->io.BasePort1,
+ card_index == -1 ? ATMEL_FW_TYPE_NONE : card_table[card_index].firmware,
+ &handle_to_dev(handle),
+ card_present,
+ link);
+ if (!((local_info_t*)link->priv)->eth_dev)
+ goto cs_failed;
+
+ /*
+ At this point, the dev_node_t structure(s) need to be
+ initialized and arranged in a linked list at link->dev.
+ */
+ strcpy(dev->node.dev_name, ((local_info_t*)link->priv)->eth_dev->name );
+ dev->node.major = dev->node.minor = 0;
+ link->dev = &dev->node;
+
+ /* Finally, report what we've done */
+ printk(KERN_INFO "%s: %s%sindex 0x%02x: Vcc %d.%d",
+ dev->node.dev_name,
+ card_index == -1 ? "" : card_table[card_index].name,
+ card_index == -1 ? "" : " ",
+ link->conf.ConfigIndex,
+ link->conf.Vcc/10, link->conf.Vcc%10);
+ if (link->conf.Vpp1)
+ printk(", Vpp %d.%d", link->conf.Vpp1/10, link->conf.Vpp1%10);
+ if (link->conf.Attributes & CONF_ENABLE_IRQ)
+ printk(", irq %d", link->irq.AssignedIRQ);
+ if (link->io.NumPorts1)
+ printk(", io 0x%04x-0x%04x", link->io.BasePort1,
+ link->io.BasePort1+link->io.NumPorts1-1);
+ if (link->io.NumPorts2)
+ printk(" & 0x%04x-0x%04x", link->io.BasePort2,
+ link->io.BasePort2+link->io.NumPorts2-1);
+ printk("\n");
+
+ link->state &= ~DEV_CONFIG_PENDING;
+ return;
+
+ cs_failed:
+ cs_error(link->handle, last_fn, last_ret);
+ atmel_release(link);
+}
+
+/*======================================================================
+
+ After a card is removed, atmel_release() will unregister the
+ device, and release the PCMCIA configuration. If the device is
+ still open, this will be postponed until it is closed.
+
+ ======================================================================*/
+
+static void atmel_release(dev_link_t *link)
+{
+ struct net_device *dev = ((local_info_t*)link->priv)->eth_dev;
+
+ DEBUG(0, "atmel_release(0x%p)\n", link);
+
+ /* Unlink the device chain */
+ link->dev = NULL;
+
+ if (dev)
+ stop_atmel_card(dev, 0);
+ ((local_info_t*)link->priv)->eth_dev = NULL;
+
+ /* Don't bother checking to see if these succeed or not */
+ pcmcia_release_configuration(link->handle);
+ if (link->io.NumPorts1)
+ pcmcia_release_io(link->handle, &link->io);
+ if (link->irq.AssignedIRQ)
+ pcmcia_release_irq(link->handle, &link->irq);
+ link->state &= ~DEV_CONFIG;
+}
+
+/*======================================================================
+
+ The card status event handler. Mostly, this schedules other
+ stuff to run after an event is received.
+
+ When a CARD_REMOVAL event is received, we immediately set a
+ private flag to block future accesses to this device. All the
+ functions that actually access the device should check this flag
+ to make sure the card is still present.
+
+ ======================================================================*/
+
+static int atmel_event(event_t event, int priority,
+ event_callback_args_t *args)
+{
+ dev_link_t *link = args->client_data;
+ local_info_t *local = link->priv;
+
+ DEBUG(1, "atmel_event(0x%06x)\n", event);
+
+ switch (event) {
+ case CS_EVENT_CARD_REMOVAL:
+ link->state &= ~DEV_PRESENT;
+ if (link->state & DEV_CONFIG) {
+ netif_device_detach(local->eth_dev);
+ atmel_release(link);
+ }
+ break;
+ case CS_EVENT_CARD_INSERTION:
+ link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
+ atmel_config(link);
+ break;
+ case CS_EVENT_PM_SUSPEND:
+ link->state |= DEV_SUSPEND;
+ /* Fall through... */
+ case CS_EVENT_RESET_PHYSICAL:
+ if (link->state & DEV_CONFIG) {
+ netif_device_detach(local->eth_dev);
+ pcmcia_release_configuration(link->handle);
+ }
+ break;
+ case CS_EVENT_PM_RESUME:
+ link->state &= ~DEV_SUSPEND;
+ /* Fall through... */
+ case CS_EVENT_CARD_RESET:
+ if (link->state & DEV_CONFIG) {
+ pcmcia_request_configuration(link->handle, &link->conf);
+ atmel_open(local->eth_dev);
+ netif_device_attach(local->eth_dev);
+ }
+ break;
+ }
+ return 0;
+} /* atmel_event */
+
+/*====================================================================*/
+static struct pcmcia_driver atmel_driver = {
+ .owner = THIS_MODULE,
+ .drv = {
+ .name = "atmel_cs",
+ },
+ .attach = atmel_attach,
+ .detach = atmel_detach,
+};
+
+static int atmel_cs_init(void)
+{
+ return pcmcia_register_driver(&atmel_driver);
+}
+
+static void atmel_cs_cleanup(void)
+{
+ pcmcia_unregister_driver(&atmel_driver);
+ BUG_ON(dev_list != NULL);
+}
+
+/*
+ This program is free software; you can redistribute it and/or
+ modify it under the terms of the GNU General Public License
+ as published by the Free Software Foundation; either version 2
+ of the License, or (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ In addition:
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions
+ are met:
+
+ 1. Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ 2. Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+ 3. The name of the author may not be used to endorse or promote
+ products derived from this software without specific prior written
+ permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+ IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
+ INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ POSSIBILITY OF SUCH DAMAGE.
+*/
+
+module_init(atmel_cs_init);
+module_exit(atmel_cs_cleanup);
diff --git a/drivers/net/wireless/atmel_pci.c b/drivers/net/wireless/atmel_pci.c
new file mode 100644
index 0000000..2eb00a9
--- /dev/null
+++ b/drivers/net/wireless/atmel_pci.c
@@ -0,0 +1,89 @@
+/*** -*- linux-c -*- **********************************************************
+
+ Driver for Atmel at76c502 at76c504 and at76c506 wireless cards.
+
+ Copyright 2004 Simon Kelley.
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This software is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License
+ along with Atmel wireless lan drivers; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+
+******************************************************************************/
+#include <linux/config.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/netdevice.h>
+#include "atmel.h"
+
+MODULE_AUTHOR("Simon Kelley");
+MODULE_DESCRIPTION("Support for Atmel at76c50x 802.11 wireless ethernet cards.");
+MODULE_LICENSE("GPL");
+MODULE_SUPPORTED_DEVICE("Atmel at76c506 PCI wireless cards");
+
+static struct pci_device_id card_ids[] = {
+ { 0x1114, 0x0506, PCI_ANY_ID, PCI_ANY_ID },
+ { 0, }
+};
+
+MODULE_DEVICE_TABLE(pci, card_ids);
+
+static int atmel_pci_probe(struct pci_dev *, const struct pci_device_id *);
+static void atmel_pci_remove(struct pci_dev *);
+
+static struct pci_driver atmel_driver = {
+ .name = "atmel",
+ .id_table = card_ids,
+ .probe = atmel_pci_probe,
+ .remove = __devexit_p(atmel_pci_remove),
+};
+
+
+static int __devinit atmel_pci_probe(struct pci_dev *pdev,
+ const struct pci_device_id *pent)
+{
+ struct net_device *dev;
+
+ if (pci_enable_device(pdev))
+ return -ENODEV;
+
+ pci_set_master(pdev);
+
+ dev = init_atmel_card(pdev->irq, pdev->resource[1].start,
+ ATMEL_FW_TYPE_506,
+ &pdev->dev, NULL, NULL);
+ if (!dev)
+ return -ENODEV;
+
+ pci_set_drvdata(pdev, dev);
+ return 0;
+}
+
+static void __devexit atmel_pci_remove(struct pci_dev *pdev)
+{
+ stop_atmel_card(pci_get_drvdata(pdev), 1);
+}
+
+static int __init atmel_init_module(void)
+{
+ return pci_module_init(&atmel_driver);
+}
+
+static void __exit atmel_cleanup_module(void)
+{
+ pci_unregister_driver(&atmel_driver);
+}
+
+module_init(atmel_init_module);
+module_exit(atmel_cleanup_module);
diff --git a/drivers/net/wireless/hermes.c b/drivers/net/wireless/hermes.c
new file mode 100644
index 0000000..21c3d0d
--- /dev/null
+++ b/drivers/net/wireless/hermes.c
@@ -0,0 +1,554 @@
+/* hermes.c
+ *
+ * Driver core for the "Hermes" wireless MAC controller, as used in
+ * the Lucent Orinoco and Cabletron RoamAbout cards. It should also
+ * work on the hfa3841 and hfa3842 MAC controller chips used in the
+ * Prism II chipsets.
+ *
+ * This is not a complete driver, just low-level access routines for
+ * the MAC controller itself.
+ *
+ * Based on the prism2 driver from Absolute Value Systems' linux-wlan
+ * project, the Linux wvlan_cs driver, Lucent's HCF-Light
+ * (wvlan_hcf.c) library, and the NetBSD wireless driver (in no
+ * particular order).
+ *
+ * Copyright (C) 2000, David Gibson, Linuxcare Australia.
+ * (C) Copyright David Gibson, IBM Corp. 2001-2003.
+ *
+ * The contents of this file are subject to the Mozilla Public License
+ * Version 1.1 (the "License"); you may not use this file except in
+ * compliance with the License. You may obtain a copy of the License
+ * at http://www.mozilla.org/MPL/
+ *
+ * Software distributed under the License is distributed on an "AS IS"
+ * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
+ * the License for the specific language governing rights and
+ * limitations under the License.
+ *
+ * Alternatively, the contents of this file may be used under the
+ * terms of the GNU General Public License version 2 (the "GPL"), in
+ * which case the provisions of the GPL are applicable instead of the
+ * above. If you wish to allow the use of your version of this file
+ * only under the terms of the GPL and not to allow others to use your
+ * version of this file under the MPL, indicate your decision by
+ * deleting the provisions above and replace them with the notice and
+ * other provisions required by the GPL. If you do not delete the
+ * provisions above, a recipient may use your version of this file
+ * under either the MPL or the GPL.
+ */
+
+#include <linux/config.h>
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/threads.h>
+#include <linux/smp.h>
+#include <asm/io.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/net.h>
+#include <asm/errno.h>
+
+#include "hermes.h"
+
+MODULE_DESCRIPTION("Low-level driver helper for Lucent Hermes chipset and Prism II HFA384x wireless MAC controller");
+MODULE_AUTHOR("Pavel Roskin <proski@gnu.org>"
+ " & David Gibson <hermes@gibson.dropbear.id.au>");
+MODULE_LICENSE("Dual MPL/GPL");
+
+/* These are maximum timeouts. Most often, card wil react much faster */
+#define CMD_BUSY_TIMEOUT (100) /* In iterations of ~1us */
+#define CMD_INIT_TIMEOUT (50000) /* in iterations of ~10us */
+#define CMD_COMPL_TIMEOUT (20000) /* in iterations of ~10us */
+#define ALLOC_COMPL_TIMEOUT (1000) /* in iterations of ~10us */
+
+/*
+ * Debugging helpers
+ */
+
+#define DMSG(stuff...) do {printk(KERN_DEBUG "hermes @ %p: " , hw->iobase); \
+ printk(stuff);} while (0)
+
+#undef HERMES_DEBUG
+#ifdef HERMES_DEBUG
+#include <stdarg.h>
+
+#define DEBUG(lvl, stuff...) if ( (lvl) <= HERMES_DEBUG) DMSG(stuff)
+
+#else /* ! HERMES_DEBUG */
+
+#define DEBUG(lvl, stuff...) do { } while (0)
+
+#endif /* ! HERMES_DEBUG */
+
+
+/*
+ * Internal functions
+ */
+
+/* Issue a command to the chip. Waiting for it to complete is the caller's
+ problem.
+
+ Returns -EBUSY if the command register is busy, 0 on success.
+
+ Callable from any context.
+*/
+static int hermes_issue_cmd(hermes_t *hw, u16 cmd, u16 param0)
+{
+ int k = CMD_BUSY_TIMEOUT;
+ u16 reg;
+
+ /* First wait for the command register to unbusy */
+ reg = hermes_read_regn(hw, CMD);
+ while ( (reg & HERMES_CMD_BUSY) && k ) {
+ k--;
+ udelay(1);
+ reg = hermes_read_regn(hw, CMD);
+ }
+ if (reg & HERMES_CMD_BUSY) {
+ return -EBUSY;
+ }
+
+ hermes_write_regn(hw, PARAM2, 0);
+ hermes_write_regn(hw, PARAM1, 0);
+ hermes_write_regn(hw, PARAM0, param0);
+ hermes_write_regn(hw, CMD, cmd);
+
+ return 0;
+}
+
+/*
+ * Function definitions
+ */
+
+void hermes_struct_init(hermes_t *hw, void __iomem *address, int reg_spacing)
+{
+ hw->iobase = address;
+ hw->reg_spacing = reg_spacing;
+ hw->inten = 0x0;
+
+#ifdef HERMES_DEBUG_BUFFER
+ hw->dbufp = 0;
+ memset(&hw->dbuf, 0xff, sizeof(hw->dbuf));
+ memset(&hw->profile, 0, sizeof(hw->profile));
+#endif
+}
+
+int hermes_init(hermes_t *hw)
+{
+ u16 status, reg;
+ int err = 0;
+ int k;
+
+ /* We don't want to be interrupted while resetting the chipset */
+ hw->inten = 0x0;
+ hermes_write_regn(hw, INTEN, 0);
+ hermes_write_regn(hw, EVACK, 0xffff);
+
+ /* Normally it's a "can't happen" for the command register to
+ be busy when we go to issue a command because we are
+ serializing all commands. However we want to have some
+ chance of resetting the card even if it gets into a stupid
+ state, so we actually wait to see if the command register
+ will unbusy itself here. */
+ k = CMD_BUSY_TIMEOUT;
+ reg = hermes_read_regn(hw, CMD);
+ while (k && (reg & HERMES_CMD_BUSY)) {
+ if (reg == 0xffff) /* Special case - the card has probably been removed,
+ so don't wait for the timeout */
+ return -ENODEV;
+
+ k--;
+ udelay(1);
+ reg = hermes_read_regn(hw, CMD);
+ }
+
+ /* No need to explicitly handle the timeout - if we've timed
+ out hermes_issue_cmd() will probably return -EBUSY below */
+
+ /* According to the documentation, EVSTAT may contain
+ obsolete event occurrence information. We have to acknowledge
+ it by writing EVACK. */
+ reg = hermes_read_regn(hw, EVSTAT);
+ hermes_write_regn(hw, EVACK, reg);
+
+ /* We don't use hermes_docmd_wait here, because the reset wipes
+ the magic constant in SWSUPPORT0 away, and it gets confused */
+ err = hermes_issue_cmd(hw, HERMES_CMD_INIT, 0);
+ if (err)
+ return err;
+
+ reg = hermes_read_regn(hw, EVSTAT);
+ k = CMD_INIT_TIMEOUT;
+ while ( (! (reg & HERMES_EV_CMD)) && k) {
+ k--;
+ udelay(10);
+ reg = hermes_read_regn(hw, EVSTAT);
+ }
+
+ hermes_write_regn(hw, SWSUPPORT0, HERMES_MAGIC);
+
+ if (! hermes_present(hw)) {
+ DEBUG(0, "hermes @ 0x%x: Card removed during reset.\n",
+ hw->iobase);
+ err = -ENODEV;
+ goto out;
+ }
+
+ if (! (reg & HERMES_EV_CMD)) {
+ printk(KERN_ERR "hermes @ %p: "
+ "Timeout waiting for card to reset (reg=0x%04x)!\n",
+ hw->iobase, reg);
+ err = -ETIMEDOUT;
+ goto out;
+ }
+
+ status = hermes_read_regn(hw, STATUS);
+
+ hermes_write_regn(hw, EVACK, HERMES_EV_CMD);
+
+ if (status & HERMES_STATUS_RESULT)
+ err = -EIO;
+
+ out:
+ return err;
+}
+
+/* Issue a command to the chip, and (busy!) wait for it to
+ * complete.
+ *
+ * Returns: < 0 on internal error, 0 on success, > 0 on error returned by the firmware
+ *
+ * Callable from any context, but locking is your problem. */
+int hermes_docmd_wait(hermes_t *hw, u16 cmd, u16 parm0,
+ struct hermes_response *resp)
+{
+ int err;
+ int k;
+ u16 reg;
+ u16 status;
+
+ err = hermes_issue_cmd(hw, cmd, parm0);
+ if (err) {
+ if (! hermes_present(hw)) {
+ if (net_ratelimit())
+ printk(KERN_WARNING "hermes @ %p: "
+ "Card removed while issuing command "
+ "0x%04x.\n", hw->iobase, cmd);
+ err = -ENODEV;
+ } else
+ if (net_ratelimit())
+ printk(KERN_ERR "hermes @ %p: "
+ "Error %d issuing command 0x%04x.\n",
+ hw->iobase, err, cmd);
+ goto out;
+ }
+
+ reg = hermes_read_regn(hw, EVSTAT);
+ k = CMD_COMPL_TIMEOUT;
+ while ( (! (reg & HERMES_EV_CMD)) && k) {
+ k--;
+ udelay(10);
+ reg = hermes_read_regn(hw, EVSTAT);
+ }
+
+ if (! hermes_present(hw)) {
+ printk(KERN_WARNING "hermes @ %p: Card removed "
+ "while waiting for command 0x%04x completion.\n",
+ hw->iobase, cmd);
+ err = -ENODEV;
+ goto out;
+ }
+
+ if (! (reg & HERMES_EV_CMD)) {
+ printk(KERN_ERR "hermes @ %p: Timeout waiting for "
+ "command 0x%04x completion.\n", hw->iobase, cmd);
+ err = -ETIMEDOUT;
+ goto out;
+ }
+
+ status = hermes_read_regn(hw, STATUS);
+ if (resp) {
+ resp->status = status;
+ resp->resp0 = hermes_read_regn(hw, RESP0);
+ resp->resp1 = hermes_read_regn(hw, RESP1);
+ resp->resp2 = hermes_read_regn(hw, RESP2);
+ }
+
+ hermes_write_regn(hw, EVACK, HERMES_EV_CMD);
+
+ if (status & HERMES_STATUS_RESULT)
+ err = -EIO;
+
+ out:
+ return err;
+}
+
+int hermes_allocate(hermes_t *hw, u16 size, u16 *fid)
+{
+ int err = 0;
+ int k;
+ u16 reg;
+
+ if ( (size < HERMES_ALLOC_LEN_MIN) || (size > HERMES_ALLOC_LEN_MAX) )
+ return -EINVAL;
+
+ err = hermes_docmd_wait(hw, HERMES_CMD_ALLOC, size, NULL);
+ if (err) {
+ return err;
+ }
+
+ reg = hermes_read_regn(hw, EVSTAT);
+ k = ALLOC_COMPL_TIMEOUT;
+ while ( (! (reg & HERMES_EV_ALLOC)) && k) {
+ k--;
+ udelay(10);
+ reg = hermes_read_regn(hw, EVSTAT);
+ }
+
+ if (! hermes_present(hw)) {
+ printk(KERN_WARNING "hermes @ %p: "
+ "Card removed waiting for frame allocation.\n",
+ hw->iobase);
+ return -ENODEV;
+ }
+
+ if (! (reg & HERMES_EV_ALLOC)) {
+ printk(KERN_ERR "hermes @ %p: "
+ "Timeout waiting for frame allocation\n",
+ hw->iobase);
+ return -ETIMEDOUT;
+ }
+
+ *fid = hermes_read_regn(hw, ALLOCFID);
+ hermes_write_regn(hw, EVACK, HERMES_EV_ALLOC);
+
+ return 0;
+}
+
+
+/* Set up a BAP to read a particular chunk of data from card's internal buffer.
+ *
+ * Returns: < 0 on internal failure (errno), 0 on success, >0 on error
+ * from firmware
+ *
+ * Callable from any context */
+static int hermes_bap_seek(hermes_t *hw, int bap, u16 id, u16 offset)
+{
+ int sreg = bap ? HERMES_SELECT1 : HERMES_SELECT0;
+ int oreg = bap ? HERMES_OFFSET1 : HERMES_OFFSET0;
+ int k;
+ u16 reg;
+
+ /* Paranoia.. */
+ if ( (offset > HERMES_BAP_OFFSET_MAX) || (offset % 2) )
+ return -EINVAL;
+
+ k = HERMES_BAP_BUSY_TIMEOUT;
+ reg = hermes_read_reg(hw, oreg);
+ while ((reg & HERMES_OFFSET_BUSY) && k) {
+ k--;
+ udelay(1);
+ reg = hermes_read_reg(hw, oreg);
+ }
+
+#ifdef HERMES_DEBUG_BUFFER
+ hw->profile[HERMES_BAP_BUSY_TIMEOUT - k]++;
+
+ if (k < HERMES_BAP_BUSY_TIMEOUT) {
+ struct hermes_debug_entry *e =
+ &hw->dbuf[(hw->dbufp++) % HERMES_DEBUG_BUFSIZE];
+ e->bap = bap;
+ e->id = id;
+ e->offset = offset;
+ e->cycles = HERMES_BAP_BUSY_TIMEOUT - k;
+ }
+#endif
+
+ if (reg & HERMES_OFFSET_BUSY)
+ return -ETIMEDOUT;
+
+ /* Now we actually set up the transfer */
+ hermes_write_reg(hw, sreg, id);
+ hermes_write_reg(hw, oreg, offset);
+
+ /* Wait for the BAP to be ready */
+ k = HERMES_BAP_BUSY_TIMEOUT;
+ reg = hermes_read_reg(hw, oreg);
+ while ( (reg & (HERMES_OFFSET_BUSY | HERMES_OFFSET_ERR)) && k) {
+ k--;
+ udelay(1);
+ reg = hermes_read_reg(hw, oreg);
+ }
+
+ if (reg != offset) {
+ printk(KERN_ERR "hermes @ %p: BAP%d offset %s: "
+ "reg=0x%x id=0x%x offset=0x%x\n", hw->iobase, bap,
+ (reg & HERMES_OFFSET_BUSY) ? "timeout" : "error",
+ reg, id, offset);
+
+ if (reg & HERMES_OFFSET_BUSY) {
+ return -ETIMEDOUT;
+ }
+
+ return -EIO; /* error or wrong offset */
+ }
+
+ return 0;
+}
+
+/* Read a block of data from the chip's buffer, via the
+ * BAP. Synchronization/serialization is the caller's problem. len
+ * must be even.
+ *
+ * Returns: < 0 on internal failure (errno), 0 on success, > 0 on error from firmware
+ */
+int hermes_bap_pread(hermes_t *hw, int bap, void *buf, unsigned len,
+ u16 id, u16 offset)
+{
+ int dreg = bap ? HERMES_DATA1 : HERMES_DATA0;
+ int err = 0;
+
+ if ( (len < 0) || (len % 2) )
+ return -EINVAL;
+
+ err = hermes_bap_seek(hw, bap, id, offset);
+ if (err)
+ goto out;
+
+ /* Actually do the transfer */
+ hermes_read_words(hw, dreg, buf, len/2);
+
+ out:
+ return err;
+}
+
+/* Write a block of data to the chip's buffer, via the
+ * BAP. Synchronization/serialization is the caller's problem. len
+ * must be even.
+ *
+ * Returns: < 0 on internal failure (errno), 0 on success, > 0 on error from firmware
+ */
+int hermes_bap_pwrite(hermes_t *hw, int bap, const void *buf, unsigned len,
+ u16 id, u16 offset)
+{
+ int dreg = bap ? HERMES_DATA1 : HERMES_DATA0;
+ int err = 0;
+
+ if ( (len < 0) || (len % 2) )
+ return -EINVAL;
+
+ err = hermes_bap_seek(hw, bap, id, offset);
+ if (err)
+ goto out;
+
+ /* Actually do the transfer */
+ hermes_write_words(hw, dreg, buf, len/2);
+
+ out:
+ return err;
+}
+
+/* Read a Length-Type-Value record from the card.
+ *
+ * If length is NULL, we ignore the length read from the card, and
+ * read the entire buffer regardless. This is useful because some of
+ * the configuration records appear to have incorrect lengths in
+ * practice.
+ *
+ * Callable from user or bh context. */
+int hermes_read_ltv(hermes_t *hw, int bap, u16 rid, unsigned bufsize,
+ u16 *length, void *buf)
+{
+ int err = 0;
+ int dreg = bap ? HERMES_DATA1 : HERMES_DATA0;
+ u16 rlength, rtype;
+ unsigned nwords;
+
+ if ( (bufsize < 0) || (bufsize % 2) )
+ return -EINVAL;
+
+ err = hermes_docmd_wait(hw, HERMES_CMD_ACCESS, rid, NULL);
+ if (err)
+ return err;
+
+ err = hermes_bap_seek(hw, bap, rid, 0);
+ if (err)
+ return err;
+
+ rlength = hermes_read_reg(hw, dreg);
+
+ if (! rlength)
+ return -ENODATA;
+
+ rtype = hermes_read_reg(hw, dreg);
+
+ if (length)
+ *length = rlength;
+
+ if (rtype != rid)
+ printk(KERN_WARNING "hermes @ %p: %s(): "
+ "rid (0x%04x) does not match type (0x%04x)\n",
+ hw->iobase, __FUNCTION__, rid, rtype);
+ if (HERMES_RECLEN_TO_BYTES(rlength) > bufsize)
+ printk(KERN_WARNING "hermes @ %p: "
+ "Truncating LTV record from %d to %d bytes. "
+ "(rid=0x%04x, len=0x%04x)\n", hw->iobase,
+ HERMES_RECLEN_TO_BYTES(rlength), bufsize, rid, rlength);
+
+ nwords = min((unsigned)rlength - 1, bufsize / 2);
+ hermes_read_words(hw, dreg, buf, nwords);
+
+ return 0;
+}
+
+int hermes_write_ltv(hermes_t *hw, int bap, u16 rid,
+ u16 length, const void *value)
+{
+ int dreg = bap ? HERMES_DATA1 : HERMES_DATA0;
+ int err = 0;
+ unsigned count;
+
+ if (length == 0)
+ return -EINVAL;
+
+ err = hermes_bap_seek(hw, bap, rid, 0);
+ if (err)
+ return err;
+
+ hermes_write_reg(hw, dreg, length);
+ hermes_write_reg(hw, dreg, rid);
+
+ count = length - 1;
+
+ hermes_write_words(hw, dreg, value, count);
+
+ err = hermes_docmd_wait(hw, HERMES_CMD_ACCESS | HERMES_CMD_WRITE,
+ rid, NULL);
+
+ return err;
+}
+
+EXPORT_SYMBOL(hermes_struct_init);
+EXPORT_SYMBOL(hermes_init);
+EXPORT_SYMBOL(hermes_docmd_wait);
+EXPORT_SYMBOL(hermes_allocate);
+
+EXPORT_SYMBOL(hermes_bap_pread);
+EXPORT_SYMBOL(hermes_bap_pwrite);
+EXPORT_SYMBOL(hermes_read_ltv);
+EXPORT_SYMBOL(hermes_write_ltv);
+
+static int __init init_hermes(void)
+{
+ return 0;
+}
+
+static void __exit exit_hermes(void)
+{
+}
+
+module_init(init_hermes);
+module_exit(exit_hermes);
diff --git a/drivers/net/wireless/hermes.h b/drivers/net/wireless/hermes.h
new file mode 100644
index 0000000..8c9e874
--- /dev/null
+++ b/drivers/net/wireless/hermes.h
@@ -0,0 +1,481 @@
+/* hermes.h
+ *
+ * Driver core for the "Hermes" wireless MAC controller, as used in
+ * the Lucent Orinoco and Cabletron RoamAbout cards. It should also
+ * work on the hfa3841 and hfa3842 MAC controller chips used in the
+ * Prism I & II chipsets.
+ *
+ * This is not a complete driver, just low-level access routines for
+ * the MAC controller itself.
+ *
+ * Based on the prism2 driver from Absolute Value Systems' linux-wlan
+ * project, the Linux wvlan_cs driver, Lucent's HCF-Light
+ * (wvlan_hcf.c) library, and the NetBSD wireless driver.
+ *
+ * Copyright (C) 2000, David Gibson, Linuxcare Australia.
+ * (C) Copyright David Gibson, IBM Corp. 2001-2003.
+ *
+ * Portions taken from hfa384x.h, Copyright (C) 1999 AbsoluteValue Systems, Inc. All Rights Reserved.
+ *
+ * This file distributed under the GPL, version 2.
+ */
+
+#ifndef _HERMES_H
+#define _HERMES_H
+
+/* Notes on locking:
+ *
+ * As a module of low level hardware access routines, there is no
+ * locking. Users of this module should ensure that they serialize
+ * access to the hermes_t structure, and to the hardware
+*/
+
+#include <linux/delay.h>
+#include <linux/if_ether.h>
+#include <asm/byteorder.h>
+
+/*
+ * Limits and constants
+ */
+#define HERMES_ALLOC_LEN_MIN (4)
+#define HERMES_ALLOC_LEN_MAX (2400)
+#define HERMES_LTV_LEN_MAX (34)
+#define HERMES_BAP_DATALEN_MAX (4096)
+#define HERMES_BAP_OFFSET_MAX (4096)
+#define HERMES_PORTID_MAX (7)
+#define HERMES_NUMPORTS_MAX (HERMES_PORTID_MAX+1)
+#define HERMES_PDR_LEN_MAX (260) /* in bytes, from EK */
+#define HERMES_PDA_RECS_MAX (200) /* a guess */
+#define HERMES_PDA_LEN_MAX (1024) /* in bytes, from EK */
+#define HERMES_SCANRESULT_MAX (35)
+#define HERMES_CHINFORESULT_MAX (8)
+#define HERMES_MAX_MULTICAST (16)
+#define HERMES_MAGIC (0x7d1f)
+
+/*
+ * Hermes register offsets
+ */
+#define HERMES_CMD (0x00)
+#define HERMES_PARAM0 (0x02)
+#define HERMES_PARAM1 (0x04)
+#define HERMES_PARAM2 (0x06)
+#define HERMES_STATUS (0x08)
+#define HERMES_RESP0 (0x0A)
+#define HERMES_RESP1 (0x0C)
+#define HERMES_RESP2 (0x0E)
+#define HERMES_INFOFID (0x10)
+#define HERMES_RXFID (0x20)
+#define HERMES_ALLOCFID (0x22)
+#define HERMES_TXCOMPLFID (0x24)
+#define HERMES_SELECT0 (0x18)
+#define HERMES_OFFSET0 (0x1C)
+#define HERMES_DATA0 (0x36)
+#define HERMES_SELECT1 (0x1A)
+#define HERMES_OFFSET1 (0x1E)
+#define HERMES_DATA1 (0x38)
+#define HERMES_EVSTAT (0x30)
+#define HERMES_INTEN (0x32)
+#define HERMES_EVACK (0x34)
+#define HERMES_CONTROL (0x14)
+#define HERMES_SWSUPPORT0 (0x28)
+#define HERMES_SWSUPPORT1 (0x2A)
+#define HERMES_SWSUPPORT2 (0x2C)
+#define HERMES_AUXPAGE (0x3A)
+#define HERMES_AUXOFFSET (0x3C)
+#define HERMES_AUXDATA (0x3E)
+
+/*
+ * CMD register bitmasks
+ */
+#define HERMES_CMD_BUSY (0x8000)
+#define HERMES_CMD_AINFO (0x7f00)
+#define HERMES_CMD_MACPORT (0x0700)
+#define HERMES_CMD_RECL (0x0100)
+#define HERMES_CMD_WRITE (0x0100)
+#define HERMES_CMD_PROGMODE (0x0300)
+#define HERMES_CMD_CMDCODE (0x003f)
+
+/*
+ * STATUS register bitmasks
+ */
+#define HERMES_STATUS_RESULT (0x7f00)
+#define HERMES_STATUS_CMDCODE (0x003f)
+
+/*
+ * OFFSET register bitmasks
+ */
+#define HERMES_OFFSET_BUSY (0x8000)
+#define HERMES_OFFSET_ERR (0x4000)
+#define HERMES_OFFSET_DATAOFF (0x0ffe)
+
+/*
+ * Event register bitmasks (INTEN, EVSTAT, EVACK)
+ */
+#define HERMES_EV_TICK (0x8000)
+#define HERMES_EV_WTERR (0x4000)
+#define HERMES_EV_INFDROP (0x2000)
+#define HERMES_EV_INFO (0x0080)
+#define HERMES_EV_DTIM (0x0020)
+#define HERMES_EV_CMD (0x0010)
+#define HERMES_EV_ALLOC (0x0008)
+#define HERMES_EV_TXEXC (0x0004)
+#define HERMES_EV_TX (0x0002)
+#define HERMES_EV_RX (0x0001)
+
+/*
+ * Command codes
+ */
+/*--- Controller Commands ----------------------------*/
+#define HERMES_CMD_INIT (0x0000)
+#define HERMES_CMD_ENABLE (0x0001)
+#define HERMES_CMD_DISABLE (0x0002)
+#define HERMES_CMD_DIAG (0x0003)
+
+/*--- Buffer Mgmt Commands ---------------------------*/
+#define HERMES_CMD_ALLOC (0x000A)
+#define HERMES_CMD_TX (0x000B)
+
+/*--- Regulate Commands ------------------------------*/
+#define HERMES_CMD_NOTIFY (0x0010)
+#define HERMES_CMD_INQUIRE (0x0011)
+
+/*--- Configure Commands -----------------------------*/
+#define HERMES_CMD_ACCESS (0x0021)
+#define HERMES_CMD_DOWNLD (0x0022)
+
+/*--- Serial I/O Commands ----------------------------*/
+#define HERMES_CMD_READMIF (0x0030)
+#define HERMES_CMD_WRITEMIF (0x0031)
+
+/*--- Debugging Commands -----------------------------*/
+#define HERMES_CMD_TEST (0x0038)
+
+
+/* Test command arguments */
+#define HERMES_TEST_SET_CHANNEL 0x0800
+#define HERMES_TEST_MONITOR 0x0b00
+#define HERMES_TEST_STOP 0x0f00
+
+/* Authentication algorithms */
+#define HERMES_AUTH_OPEN 1
+#define HERMES_AUTH_SHARED_KEY 2
+
+/* WEP settings */
+#define HERMES_WEP_PRIVACY_INVOKED 0x0001
+#define HERMES_WEP_EXCL_UNENCRYPTED 0x0002
+#define HERMES_WEP_HOST_ENCRYPT 0x0010
+#define HERMES_WEP_HOST_DECRYPT 0x0080
+
+/* Symbol hostscan options */
+#define HERMES_HOSTSCAN_SYMBOL_5SEC 0x0001
+#define HERMES_HOSTSCAN_SYMBOL_ONCE 0x0002
+#define HERMES_HOSTSCAN_SYMBOL_PASSIVE 0x0040
+#define HERMES_HOSTSCAN_SYMBOL_BCAST 0x0080
+
+/*
+ * Frame structures and constants
+ */
+
+#define HERMES_DESCRIPTOR_OFFSET 0
+#define HERMES_802_11_OFFSET (14)
+#define HERMES_802_3_OFFSET (14+32)
+#define HERMES_802_2_OFFSET (14+32+14)
+
+#define HERMES_RXSTAT_ERR (0x0003)
+#define HERMES_RXSTAT_BADCRC (0x0001)
+#define HERMES_RXSTAT_UNDECRYPTABLE (0x0002)
+#define HERMES_RXSTAT_MACPORT (0x0700)
+#define HERMES_RXSTAT_PCF (0x1000) /* Frame was received in CF period */
+#define HERMES_RXSTAT_MSGTYPE (0xE000)
+#define HERMES_RXSTAT_1042 (0x2000) /* RFC-1042 frame */
+#define HERMES_RXSTAT_TUNNEL (0x4000) /* bridge-tunnel encoded frame */
+#define HERMES_RXSTAT_WMP (0x6000) /* Wavelan-II Management Protocol frame */
+
+struct hermes_tx_descriptor {
+ u16 status;
+ u16 reserved1;
+ u16 reserved2;
+ u32 sw_support;
+ u8 retry_count;
+ u8 tx_rate;
+ u16 tx_control;
+} __attribute__ ((packed));
+
+#define HERMES_TXSTAT_RETRYERR (0x0001)
+#define HERMES_TXSTAT_AGEDERR (0x0002)
+#define HERMES_TXSTAT_DISCON (0x0004)
+#define HERMES_TXSTAT_FORMERR (0x0008)
+
+#define HERMES_TXCTRL_TX_OK (0x0002) /* ?? interrupt on Tx complete */
+#define HERMES_TXCTRL_TX_EX (0x0004) /* ?? interrupt on Tx exception */
+#define HERMES_TXCTRL_802_11 (0x0008) /* We supply 802.11 header */
+#define HERMES_TXCTRL_ALT_RTRY (0x0020)
+
+/* Inquiry constants and data types */
+
+#define HERMES_INQ_TALLIES (0xF100)
+#define HERMES_INQ_SCAN (0xF101)
+#define HERMES_INQ_CHANNELINFO (0xF102)
+#define HERMES_INQ_HOSTSCAN (0xF103)
+#define HERMES_INQ_HOSTSCAN_SYMBOL (0xF104)
+#define HERMES_INQ_LINKSTATUS (0xF200)
+#define HERMES_INQ_SEC_STAT_AGERE (0xF202)
+
+struct hermes_tallies_frame {
+ u16 TxUnicastFrames;
+ u16 TxMulticastFrames;
+ u16 TxFragments;
+ u16 TxUnicastOctets;
+ u16 TxMulticastOctets;
+ u16 TxDeferredTransmissions;
+ u16 TxSingleRetryFrames;
+ u16 TxMultipleRetryFrames;
+ u16 TxRetryLimitExceeded;
+ u16 TxDiscards;
+ u16 RxUnicastFrames;
+ u16 RxMulticastFrames;
+ u16 RxFragments;
+ u16 RxUnicastOctets;
+ u16 RxMulticastOctets;
+ u16 RxFCSErrors;
+ u16 RxDiscards_NoBuffer;
+ u16 TxDiscardsWrongSA;
+ u16 RxWEPUndecryptable;
+ u16 RxMsgInMsgFragments;
+ u16 RxMsgInBadMsgFragments;
+ /* Those last are probably not available in very old firmwares */
+ u16 RxDiscards_WEPICVError;
+ u16 RxDiscards_WEPExcluded;
+} __attribute__ ((packed));
+
+/* Grabbed from wlan-ng - Thanks Mark... - Jean II
+ * This is the result of a scan inquiry command */
+/* Structure describing info about an Access Point */
+struct prism2_scan_apinfo {
+ u16 channel; /* Channel where the AP sits */
+ u16 noise; /* Noise level */
+ u16 level; /* Signal level */
+ u8 bssid[ETH_ALEN]; /* MAC address of the Access Point */
+ u16 beacon_interv; /* Beacon interval */
+ u16 capabilities; /* Capabilities */
+ u16 essid_len; /* ESSID length */
+ u8 essid[32]; /* ESSID of the network */
+ u8 rates[10]; /* Bit rate supported */
+ u16 proberesp_rate; /* Data rate of the response frame */
+ u16 atim; /* ATIM window time, Kus (hostscan only) */
+} __attribute__ ((packed));
+
+/* Same stuff for the Lucent/Agere card.
+ * Thanks to h1kari <h1kari AT dachb0den.com> - Jean II */
+struct agere_scan_apinfo {
+ u16 channel; /* Channel where the AP sits */
+ u16 noise; /* Noise level */
+ u16 level; /* Signal level */
+ u8 bssid[ETH_ALEN]; /* MAC address of the Access Point */
+ u16 beacon_interv; /* Beacon interval */
+ u16 capabilities; /* Capabilities */
+ /* bits: 0-ess, 1-ibss, 4-privacy [wep] */
+ u16 essid_len; /* ESSID length */
+ u8 essid[32]; /* ESSID of the network */
+} __attribute__ ((packed));
+
+/* Moustafa: Scan structure for Symbol cards */
+struct symbol_scan_apinfo {
+ u8 channel; /* Channel where the AP sits */
+ u8 unknown1; /* 8 in 2.9x and 3.9x f/w, 0 otherwise */
+ u16 noise; /* Noise level */
+ u16 level; /* Signal level */
+ u8 bssid[ETH_ALEN]; /* MAC address of the Access Point */
+ u16 beacon_interv; /* Beacon interval */
+ u16 capabilities; /* Capabilities */
+ /* bits: 0-ess, 1-ibss, 4-privacy [wep] */
+ u16 essid_len; /* ESSID length */
+ u8 essid[32]; /* ESSID of the network */
+ u16 rates[5]; /* Bit rate supported */
+ u16 basic_rates; /* Basic rates bitmask */
+ u8 unknown2[6]; /* Always FF:FF:FF:FF:00:00 */
+ u8 unknown3[8]; /* Always 0, appeared in f/w 3.91-68 */
+} __attribute__ ((packed));
+
+union hermes_scan_info {
+ struct agere_scan_apinfo a;
+ struct prism2_scan_apinfo p;
+ struct symbol_scan_apinfo s;
+};
+
+#define HERMES_LINKSTATUS_NOT_CONNECTED (0x0000)
+#define HERMES_LINKSTATUS_CONNECTED (0x0001)
+#define HERMES_LINKSTATUS_DISCONNECTED (0x0002)
+#define HERMES_LINKSTATUS_AP_CHANGE (0x0003)
+#define HERMES_LINKSTATUS_AP_OUT_OF_RANGE (0x0004)
+#define HERMES_LINKSTATUS_AP_IN_RANGE (0x0005)
+#define HERMES_LINKSTATUS_ASSOC_FAILED (0x0006)
+
+struct hermes_linkstatus {
+ u16 linkstatus; /* Link status */
+} __attribute__ ((packed));
+
+struct hermes_response {
+ u16 status, resp0, resp1, resp2;
+};
+
+/* "ID" structure - used for ESSID and station nickname */
+struct hermes_idstring {
+ u16 len;
+ u16 val[16];
+} __attribute__ ((packed));
+
+struct hermes_multicast {
+ u8 addr[HERMES_MAX_MULTICAST][ETH_ALEN];
+} __attribute__ ((packed));
+
+// #define HERMES_DEBUG_BUFFER 1
+#define HERMES_DEBUG_BUFSIZE 4096
+struct hermes_debug_entry {
+ int bap;
+ u16 id, offset;
+ int cycles;
+};
+
+#ifdef __KERNEL__
+
+/* Timeouts */
+#define HERMES_BAP_BUSY_TIMEOUT (10000) /* In iterations of ~1us */
+
+/* Basic control structure */
+typedef struct hermes {
+ void __iomem *iobase;
+ int reg_spacing;
+#define HERMES_16BIT_REGSPACING 0
+#define HERMES_32BIT_REGSPACING 1
+
+ u16 inten; /* Which interrupts should be enabled? */
+
+#ifdef HERMES_DEBUG_BUFFER
+ struct hermes_debug_entry dbuf[HERMES_DEBUG_BUFSIZE];
+ unsigned long dbufp;
+ unsigned long profile[HERMES_BAP_BUSY_TIMEOUT+1];
+#endif
+} hermes_t;
+
+/* Register access convenience macros */
+#define hermes_read_reg(hw, off) \
+ (ioread16((hw)->iobase + ( (off) << (hw)->reg_spacing )))
+#define hermes_write_reg(hw, off, val) \
+ (iowrite16((val), (hw)->iobase + ((off) << (hw)->reg_spacing)))
+#define hermes_read_regn(hw, name) hermes_read_reg((hw), HERMES_##name)
+#define hermes_write_regn(hw, name, val) hermes_write_reg((hw), HERMES_##name, (val))
+
+/* Function prototypes */
+void hermes_struct_init(hermes_t *hw, void __iomem *address, int reg_spacing);
+int hermes_init(hermes_t *hw);
+int hermes_docmd_wait(hermes_t *hw, u16 cmd, u16 parm0,
+ struct hermes_response *resp);
+int hermes_allocate(hermes_t *hw, u16 size, u16 *fid);
+
+int hermes_bap_pread(hermes_t *hw, int bap, void *buf, unsigned len,
+ u16 id, u16 offset);
+int hermes_bap_pwrite(hermes_t *hw, int bap, const void *buf, unsigned len,
+ u16 id, u16 offset);
+int hermes_read_ltv(hermes_t *hw, int bap, u16 rid, unsigned buflen,
+ u16 *length, void *buf);
+int hermes_write_ltv(hermes_t *hw, int bap, u16 rid,
+ u16 length, const void *value);
+
+/* Inline functions */
+
+static inline int hermes_present(hermes_t *hw)
+{
+ return hermes_read_regn(hw, SWSUPPORT0) == HERMES_MAGIC;
+}
+
+static inline void hermes_set_irqmask(hermes_t *hw, u16 events)
+{
+ hw->inten = events;
+ hermes_write_regn(hw, INTEN, events);
+}
+
+static inline int hermes_enable_port(hermes_t *hw, int port)
+{
+ return hermes_docmd_wait(hw, HERMES_CMD_ENABLE | (port << 8),
+ 0, NULL);
+}
+
+static inline int hermes_disable_port(hermes_t *hw, int port)
+{
+ return hermes_docmd_wait(hw, HERMES_CMD_DISABLE | (port << 8),
+ 0, NULL);
+}
+
+/* Initiate an INQUIRE command (tallies or scan). The result will come as an
+ * information frame in __orinoco_ev_info() */
+static inline int hermes_inquire(hermes_t *hw, u16 rid)
+{
+ return hermes_docmd_wait(hw, HERMES_CMD_INQUIRE, rid, NULL);
+}
+
+#define HERMES_BYTES_TO_RECLEN(n) ( (((n)+1)/2) + 1 )
+#define HERMES_RECLEN_TO_BYTES(n) ( ((n)-1) * 2 )
+
+/* Note that for the next two, the count is in 16-bit words, not bytes */
+static inline void hermes_read_words(struct hermes *hw, int off, void *buf, unsigned count)
+{
+ off = off << hw->reg_spacing;
+ ioread16_rep(hw->iobase + off, buf, count);
+}
+
+static inline void hermes_write_words(struct hermes *hw, int off, const void *buf, unsigned count)
+{
+ off = off << hw->reg_spacing;
+ iowrite16_rep(hw->iobase + off, buf, count);
+}
+
+static inline void hermes_clear_words(struct hermes *hw, int off, unsigned count)
+{
+ unsigned i;
+
+ off = off << hw->reg_spacing;
+
+ for (i = 0; i < count; i++)
+ iowrite16(0, hw->iobase + off);
+}
+
+#define HERMES_READ_RECORD(hw, bap, rid, buf) \
+ (hermes_read_ltv((hw),(bap),(rid), sizeof(*buf), NULL, (buf)))
+#define HERMES_WRITE_RECORD(hw, bap, rid, buf) \
+ (hermes_write_ltv((hw),(bap),(rid),HERMES_BYTES_TO_RECLEN(sizeof(*buf)),(buf)))
+
+static inline int hermes_read_wordrec(hermes_t *hw, int bap, u16 rid, u16 *word)
+{
+ u16 rec;
+ int err;
+
+ err = HERMES_READ_RECORD(hw, bap, rid, &rec);
+ *word = le16_to_cpu(rec);
+ return err;
+}
+
+static inline int hermes_write_wordrec(hermes_t *hw, int bap, u16 rid, u16 word)
+{
+ u16 rec = cpu_to_le16(word);
+ return HERMES_WRITE_RECORD(hw, bap, rid, &rec);
+}
+
+#else /* ! __KERNEL__ */
+
+/* These are provided for the benefit of userspace drivers and testing programs
+ which use ioperm() or iopl() */
+
+#define hermes_read_reg(base, off) (inw((base) + (off)))
+#define hermes_write_reg(base, off, val) (outw((val), (base) + (off)))
+
+#define hermes_read_regn(base, name) (hermes_read_reg((base), HERMES_##name))
+#define hermes_write_regn(base, name, val) (hermes_write_reg((base), HERMES_##name, (val)))
+
+/* Note that for the next two, the count is in 16-bit words, not bytes */
+#define hermes_read_data(base, off, buf, count) (insw((base) + (off), (buf), (count)))
+#define hermes_write_data(base, off, buf, count) (outsw((base) + (off), (buf), (count)))
+
+#endif /* ! __KERNEL__ */
+
+#endif /* _HERMES_H */
diff --git a/drivers/net/wireless/hermes_rid.h b/drivers/net/wireless/hermes_rid.h
new file mode 100644
index 0000000..4f46b48
--- /dev/null
+++ b/drivers/net/wireless/hermes_rid.h
@@ -0,0 +1,148 @@
+#ifndef _HERMES_RID_H
+#define _HERMES_RID_H
+
+/*
+ * Configuration RIDs
+ */
+#define HERMES_RID_CNFPORTTYPE 0xFC00
+#define HERMES_RID_CNFOWNMACADDR 0xFC01
+#define HERMES_RID_CNFDESIREDSSID 0xFC02
+#define HERMES_RID_CNFOWNCHANNEL 0xFC03
+#define HERMES_RID_CNFOWNSSID 0xFC04
+#define HERMES_RID_CNFOWNATIMWINDOW 0xFC05
+#define HERMES_RID_CNFSYSTEMSCALE 0xFC06
+#define HERMES_RID_CNFMAXDATALEN 0xFC07
+#define HERMES_RID_CNFWDSADDRESS 0xFC08
+#define HERMES_RID_CNFPMENABLED 0xFC09
+#define HERMES_RID_CNFPMEPS 0xFC0A
+#define HERMES_RID_CNFMULTICASTRECEIVE 0xFC0B
+#define HERMES_RID_CNFMAXSLEEPDURATION 0xFC0C
+#define HERMES_RID_CNFPMHOLDOVERDURATION 0xFC0D
+#define HERMES_RID_CNFOWNNAME 0xFC0E
+#define HERMES_RID_CNFOWNDTIMPERIOD 0xFC10
+#define HERMES_RID_CNFWDSADDRESS1 0xFC11
+#define HERMES_RID_CNFWDSADDRESS2 0xFC12
+#define HERMES_RID_CNFWDSADDRESS3 0xFC13
+#define HERMES_RID_CNFWDSADDRESS4 0xFC14
+#define HERMES_RID_CNFWDSADDRESS5 0xFC15
+#define HERMES_RID_CNFWDSADDRESS6 0xFC16
+#define HERMES_RID_CNFMULTICASTPMBUFFERING 0xFC17
+#define HERMES_RID_CNFWEPENABLED_AGERE 0xFC20
+#define HERMES_RID_CNFAUTHENTICATION_AGERE 0xFC21
+#define HERMES_RID_CNFMANDATORYBSSID_SYMBOL 0xFC21
+#define HERMES_RID_CNFWEPDEFAULTKEYID 0xFC23
+#define HERMES_RID_CNFDEFAULTKEY0 0xFC24
+#define HERMES_RID_CNFDEFAULTKEY1 0xFC25
+#define HERMES_RID_CNFMWOROBUST_AGERE 0xFC25
+#define HERMES_RID_CNFDEFAULTKEY2 0xFC26
+#define HERMES_RID_CNFDEFAULTKEY3 0xFC27
+#define HERMES_RID_CNFWEPFLAGS_INTERSIL 0xFC28
+#define HERMES_RID_CNFWEPKEYMAPPINGTABLE 0xFC29
+#define HERMES_RID_CNFAUTHENTICATION 0xFC2A
+#define HERMES_RID_CNFMAXASSOCSTA 0xFC2B
+#define HERMES_RID_CNFKEYLENGTH_SYMBOL 0xFC2B
+#define HERMES_RID_CNFTXCONTROL 0xFC2C
+#define HERMES_RID_CNFROAMINGMODE 0xFC2D
+#define HERMES_RID_CNFHOSTAUTHENTICATION 0xFC2E
+#define HERMES_RID_CNFRCVCRCERROR 0xFC30
+#define HERMES_RID_CNFMMLIFE 0xFC31
+#define HERMES_RID_CNFALTRETRYCOUNT 0xFC32
+#define HERMES_RID_CNFBEACONINT 0xFC33
+#define HERMES_RID_CNFAPPCFINFO 0xFC34
+#define HERMES_RID_CNFSTAPCFINFO 0xFC35
+#define HERMES_RID_CNFPRIORITYQUSAGE 0xFC37
+#define HERMES_RID_CNFTIMCTRL 0xFC40
+#define HERMES_RID_CNFTHIRTY2TALLY 0xFC42
+#define HERMES_RID_CNFENHSECURITY 0xFC43
+#define HERMES_RID_CNFGROUPADDRESSES 0xFC80
+#define HERMES_RID_CNFCREATEIBSS 0xFC81
+#define HERMES_RID_CNFFRAGMENTATIONTHRESHOLD 0xFC82
+#define HERMES_RID_CNFRTSTHRESHOLD 0xFC83
+#define HERMES_RID_CNFTXRATECONTROL 0xFC84
+#define HERMES_RID_CNFPROMISCUOUSMODE 0xFC85
+#define HERMES_RID_CNFBASICRATES_SYMBOL 0xFC8A
+#define HERMES_RID_CNFPREAMBLE_SYMBOL 0xFC8C
+#define HERMES_RID_CNFFRAGMENTATIONTHRESHOLD0 0xFC90
+#define HERMES_RID_CNFFRAGMENTATIONTHRESHOLD1 0xFC91
+#define HERMES_RID_CNFFRAGMENTATIONTHRESHOLD2 0xFC92
+#define HERMES_RID_CNFFRAGMENTATIONTHRESHOLD3 0xFC93
+#define HERMES_RID_CNFFRAGMENTATIONTHRESHOLD4 0xFC94
+#define HERMES_RID_CNFFRAGMENTATIONTHRESHOLD5 0xFC95
+#define HERMES_RID_CNFFRAGMENTATIONTHRESHOLD6 0xFC96
+#define HERMES_RID_CNFRTSTHRESHOLD0 0xFC97
+#define HERMES_RID_CNFRTSTHRESHOLD1 0xFC98
+#define HERMES_RID_CNFRTSTHRESHOLD2 0xFC99
+#define HERMES_RID_CNFRTSTHRESHOLD3 0xFC9A
+#define HERMES_RID_CNFRTSTHRESHOLD4 0xFC9B
+#define HERMES_RID_CNFRTSTHRESHOLD5 0xFC9C
+#define HERMES_RID_CNFRTSTHRESHOLD6 0xFC9D
+#define HERMES_RID_CNFHOSTSCAN_SYMBOL 0xFCAB
+#define HERMES_RID_CNFSHORTPREAMBLE 0xFCB0
+#define HERMES_RID_CNFWEPKEYS_AGERE 0xFCB0
+#define HERMES_RID_CNFEXCLUDELONGPREAMBLE 0xFCB1
+#define HERMES_RID_CNFTXKEY_AGERE 0xFCB1
+#define HERMES_RID_CNFAUTHENTICATIONRSPTO 0xFCB2
+#define HERMES_RID_CNFSCANSSID_AGERE 0xFCB2
+#define HERMES_RID_CNFBASICRATES 0xFCB3
+#define HERMES_RID_CNFSUPPORTEDRATES 0xFCB4
+#define HERMES_RID_CNFTICKTIME 0xFCE0
+#define HERMES_RID_CNFSCANREQUEST 0xFCE1
+#define HERMES_RID_CNFJOINREQUEST 0xFCE2
+#define HERMES_RID_CNFAUTHENTICATESTATION 0xFCE3
+#define HERMES_RID_CNFCHANNELINFOREQUEST 0xFCE4
+#define HERMES_RID_CNFHOSTSCAN 0xFCE5
+
+/*
+ * Information RIDs
+ */
+#define HERMES_RID_MAXLOADTIME 0xFD00
+#define HERMES_RID_DOWNLOADBUFFER 0xFD01
+#define HERMES_RID_PRIID 0xFD02
+#define HERMES_RID_PRISUPRANGE 0xFD03
+#define HERMES_RID_CFIACTRANGES 0xFD04
+#define HERMES_RID_NICSERNUM 0xFD0A
+#define HERMES_RID_NICID 0xFD0B
+#define HERMES_RID_MFISUPRANGE 0xFD0C
+#define HERMES_RID_CFISUPRANGE 0xFD0D
+#define HERMES_RID_CHANNELLIST 0xFD10
+#define HERMES_RID_REGULATORYDOMAINS 0xFD11
+#define HERMES_RID_TEMPTYPE 0xFD12
+#define HERMES_RID_CIS 0xFD13
+#define HERMES_RID_STAID 0xFD20
+#define HERMES_RID_STASUPRANGE 0xFD21
+#define HERMES_RID_MFIACTRANGES 0xFD22
+#define HERMES_RID_CFIACTRANGES2 0xFD23
+#define HERMES_RID_SECONDARYVERSION_SYMBOL 0xFD24
+#define HERMES_RID_PORTSTATUS 0xFD40
+#define HERMES_RID_CURRENTSSID 0xFD41
+#define HERMES_RID_CURRENTBSSID 0xFD42
+#define HERMES_RID_COMMSQUALITY 0xFD43
+#define HERMES_RID_CURRENTTXRATE 0xFD44
+#define HERMES_RID_CURRENTBEACONINTERVAL 0xFD45
+#define HERMES_RID_CURRENTSCALETHRESHOLDS 0xFD46
+#define HERMES_RID_PROTOCOLRSPTIME 0xFD47
+#define HERMES_RID_SHORTRETRYLIMIT 0xFD48
+#define HERMES_RID_LONGRETRYLIMIT 0xFD49
+#define HERMES_RID_MAXTRANSMITLIFETIME 0xFD4A
+#define HERMES_RID_MAXRECEIVELIFETIME 0xFD4B
+#define HERMES_RID_CFPOLLABLE 0xFD4C
+#define HERMES_RID_AUTHENTICATIONALGORITHMS 0xFD4D
+#define HERMES_RID_PRIVACYOPTIONIMPLEMENTED 0xFD4F
+#define HERMES_RID_DBMCOMMSQUALITY_INTERSIL 0xFD51
+#define HERMES_RID_CURRENTTXRATE1 0xFD80
+#define HERMES_RID_CURRENTTXRATE2 0xFD81
+#define HERMES_RID_CURRENTTXRATE3 0xFD82
+#define HERMES_RID_CURRENTTXRATE4 0xFD83
+#define HERMES_RID_CURRENTTXRATE5 0xFD84
+#define HERMES_RID_CURRENTTXRATE6 0xFD85
+#define HERMES_RID_OWNMACADDR 0xFD86
+#define HERMES_RID_SCANRESULTSTABLE 0xFD88
+#define HERMES_RID_PHYTYPE 0xFDC0
+#define HERMES_RID_CURRENTCHANNEL 0xFDC1
+#define HERMES_RID_CURRENTPOWERSTATE 0xFDC2
+#define HERMES_RID_CCAMODE 0xFDC3
+#define HERMES_RID_SUPPORTEDDATARATES 0xFDC6
+#define HERMES_RID_BUILDSEQ 0xFFFE
+#define HERMES_RID_FWID 0xFFFF
+
+#endif
diff --git a/drivers/net/wireless/i82586.h b/drivers/net/wireless/i82586.h
new file mode 100644
index 0000000..5f65b25
--- /dev/null
+++ b/drivers/net/wireless/i82586.h
@@ -0,0 +1,413 @@
+/*
+ * Intel 82586 IEEE 802.3 Ethernet LAN Coprocessor.
+ *
+ * See:
+ * Intel Microcommunications 1991
+ * p1-1 to p1-37
+ * Intel order No. 231658
+ * ISBN 1-55512-119-5
+ *
+ * Unfortunately, the above chapter mentions neither
+ * the System Configuration Pointer (SCP) nor the
+ * Intermediate System Configuration Pointer (ISCP),
+ * so we probably need to look elsewhere for the
+ * whole story -- some recommend the "Intel LAN
+ * Components manual" but I have neither a copy
+ * nor a full reference. But "elsewhere" may be
+ * in the same publication...
+ * The description of a later device, the
+ * "82596CA High-Performance 32-Bit Local Area Network
+ * Coprocessor", (ibid. p1-38 to p1-109) does mention
+ * the SCP and ISCP and also has an i82586 compatibility
+ * mode. Even more useful is "AP-235 An 82586 Data Link
+ * Driver" (ibid. p1-337 to p1-417).
+ */
+
+#define I82586_MEMZ (64 * 1024)
+
+#define I82586_SCP_ADDR (I82586_MEMZ - sizeof(scp_t))
+
+#define ADDR_LEN 6
+#define I82586NULL 0xFFFF
+
+#define toff(t,p,f) (unsigned short)((void *)(&((t *)((void *)0 + (p)))->f) - (void *)0)
+
+/*
+ * System Configuration Pointer (SCP).
+ */
+typedef struct scp_t scp_t;
+struct scp_t
+{
+ unsigned short scp_sysbus; /* 82586 bus width: */
+#define SCP_SY_16BBUS (0x0 << 0) /* 16 bits */
+#define SCP_SY_8BBUS (0x1 << 0) /* 8 bits. */
+ unsigned short scp_junk[2]; /* Unused */
+ unsigned short scp_iscpl; /* lower 16 bits of ISCP_ADDR */
+ unsigned short scp_iscph; /* upper 16 bits of ISCP_ADDR */
+};
+
+/*
+ * Intermediate System Configuration Pointer (ISCP).
+ */
+typedef struct iscp_t iscp_t;
+struct iscp_t
+{
+ unsigned short iscp_busy; /* set by CPU before first CA, */
+ /* cleared by 82586 after read. */
+ unsigned short iscp_offset; /* offset of SCB */
+ unsigned short iscp_basel; /* base of SCB */
+ unsigned short iscp_baseh; /* " */
+};
+
+/*
+ * System Control Block (SCB).
+ * The 82586 writes its status to scb_status and then
+ * raises an interrupt to alert the CPU.
+ * The CPU writes a command to scb_command and
+ * then issues a Channel Attention (CA) to alert the 82586.
+ */
+typedef struct scb_t scb_t;
+struct scb_t
+{
+ unsigned short scb_status; /* Status of 82586 */
+#define SCB_ST_INT (0xF << 12) /* Some of: */
+#define SCB_ST_CX (0x1 << 15) /* Cmd completed */
+#define SCB_ST_FR (0x1 << 14) /* Frame received */
+#define SCB_ST_CNA (0x1 << 13) /* Cmd unit not active */
+#define SCB_ST_RNR (0x1 << 12) /* Rcv unit not ready */
+#define SCB_ST_JUNK0 (0x1 << 11) /* 0 */
+#define SCB_ST_CUS (0x7 << 8) /* Cmd unit status */
+#define SCB_ST_CUS_IDLE (0 << 8) /* Idle */
+#define SCB_ST_CUS_SUSP (1 << 8) /* Suspended */
+#define SCB_ST_CUS_ACTV (2 << 8) /* Active */
+#define SCB_ST_JUNK1 (0x1 << 7) /* 0 */
+#define SCB_ST_RUS (0x7 << 4) /* Rcv unit status */
+#define SCB_ST_RUS_IDLE (0 << 4) /* Idle */
+#define SCB_ST_RUS_SUSP (1 << 4) /* Suspended */
+#define SCB_ST_RUS_NRES (2 << 4) /* No resources */
+#define SCB_ST_RUS_RDY (4 << 4) /* Ready */
+ unsigned short scb_command; /* Next command */
+#define SCB_CMD_ACK_CX (0x1 << 15) /* Ack cmd completion */
+#define SCB_CMD_ACK_FR (0x1 << 14) /* Ack frame received */
+#define SCB_CMD_ACK_CNA (0x1 << 13) /* Ack CU not active */
+#define SCB_CMD_ACK_RNR (0x1 << 12) /* Ack RU not ready */
+#define SCB_CMD_JUNKX (0x1 << 11) /* Unused */
+#define SCB_CMD_CUC (0x7 << 8) /* Command Unit command */
+#define SCB_CMD_CUC_NOP (0 << 8) /* Nop */
+#define SCB_CMD_CUC_GO (1 << 8) /* Start cbl_offset */
+#define SCB_CMD_CUC_RES (2 << 8) /* Resume execution */
+#define SCB_CMD_CUC_SUS (3 << 8) /* Suspend " */
+#define SCB_CMD_CUC_ABT (4 << 8) /* Abort " */
+#define SCB_CMD_RESET (0x1 << 7) /* Reset chip (hardware) */
+#define SCB_CMD_RUC (0x7 << 4) /* Receive Unit command */
+#define SCB_CMD_RUC_NOP (0 << 4) /* Nop */
+#define SCB_CMD_RUC_GO (1 << 4) /* Start rfa_offset */
+#define SCB_CMD_RUC_RES (2 << 4) /* Resume reception */
+#define SCB_CMD_RUC_SUS (3 << 4) /* Suspend " */
+#define SCB_CMD_RUC_ABT (4 << 4) /* Abort " */
+ unsigned short scb_cbl_offset; /* Offset of first command unit */
+ /* Action Command */
+ unsigned short scb_rfa_offset; /* Offset of first Receive */
+ /* Frame Descriptor in the */
+ /* Receive Frame Area */
+ unsigned short scb_crcerrs; /* Properly aligned frames */
+ /* received with a CRC error */
+ unsigned short scb_alnerrs; /* Misaligned frames received */
+ /* with a CRC error */
+ unsigned short scb_rscerrs; /* Frames lost due to no space */
+ unsigned short scb_ovrnerrs; /* Frames lost due to slow bus */
+};
+
+#define scboff(p,f) toff(scb_t, p, f)
+
+/*
+ * The eight Action Commands.
+ */
+typedef enum acmd_e acmd_e;
+enum acmd_e
+{
+ acmd_nop = 0, /* Do nothing */
+ acmd_ia_setup = 1, /* Load an (ethernet) address into the */
+ /* 82586 */
+ acmd_configure = 2, /* Update the 82586 operating parameters */
+ acmd_mc_setup = 3, /* Load a list of (ethernet) multicast */
+ /* addresses into the 82586 */
+ acmd_transmit = 4, /* Transmit a frame */
+ acmd_tdr = 5, /* Perform a Time Domain Reflectometer */
+ /* test on the serial link */
+ acmd_dump = 6, /* Copy 82586 registers to memory */
+ acmd_diagnose = 7, /* Run an internal self test */
+};
+
+/*
+ * Generic Action Command header.
+ */
+typedef struct ach_t ach_t;
+struct ach_t
+{
+ unsigned short ac_status; /* Command status: */
+#define AC_SFLD_C (0x1 << 15) /* Command completed */
+#define AC_SFLD_B (0x1 << 14) /* Busy executing */
+#define AC_SFLD_OK (0x1 << 13) /* Completed error free */
+#define AC_SFLD_A (0x1 << 12) /* Command aborted */
+#define AC_SFLD_FAIL (0x1 << 11) /* Selftest failed */
+#define AC_SFLD_S10 (0x1 << 10) /* No carrier sense */
+ /* during transmission */
+#define AC_SFLD_S9 (0x1 << 9) /* Tx unsuccessful: */
+ /* (stopped) lost CTS */
+#define AC_SFLD_S8 (0x1 << 8) /* Tx unsuccessful: */
+ /* (stopped) slow DMA */
+#define AC_SFLD_S7 (0x1 << 7) /* Tx deferred: */
+ /* other link traffic */
+#define AC_SFLD_S6 (0x1 << 6) /* Heart Beat: collision */
+ /* detect after last tx */
+#define AC_SFLD_S5 (0x1 << 5) /* Tx stopped: */
+ /* excessive collisions */
+#define AC_SFLD_MAXCOL (0xF << 0) /* Collision count */
+ unsigned short ac_command; /* Command specifier: */
+#define AC_CFLD_EL (0x1 << 15) /* End of command list */
+#define AC_CFLD_S (0x1 << 14) /* Suspend on completion */
+#define AC_CFLD_I (0x1 << 13) /* Interrupt on completion */
+#define AC_CFLD_CMD (0x7 << 0) /* acmd_e */
+ unsigned short ac_link; /* Next Action Command */
+};
+
+#define acoff(p,f) toff(ach_t, p, f)
+
+/*
+ * The Nop Action Command.
+ */
+typedef struct ac_nop_t ac_nop_t;
+struct ac_nop_t
+{
+ ach_t nop_h;
+};
+
+/*
+ * The IA-Setup Action Command.
+ */
+typedef struct ac_ias_t ac_ias_t;
+struct ac_ias_t
+{
+ ach_t ias_h;
+ unsigned char ias_addr[ADDR_LEN]; /* The (ethernet) address */
+};
+
+/*
+ * The Configure Action Command.
+ */
+typedef struct ac_cfg_t ac_cfg_t;
+struct ac_cfg_t
+{
+ ach_t cfg_h;
+ unsigned char cfg_byte_cnt; /* Size foll data: 4-12 */
+#define AC_CFG_BYTE_CNT(v) (((v) & 0xF) << 0)
+ unsigned char cfg_fifolim; /* FIFO threshold */
+#define AC_CFG_FIFOLIM(v) (((v) & 0xF) << 0)
+ unsigned char cfg_byte8;
+#define AC_CFG_SAV_BF(v) (((v) & 0x1) << 7) /* Save rxd bad frames */
+#define AC_CFG_SRDY(v) (((v) & 0x1) << 6) /* SRDY/ARDY pin means */
+ /* external sync. */
+ unsigned char cfg_byte9;
+#define AC_CFG_ELPBCK(v) (((v) & 0x1) << 7) /* External loopback */
+#define AC_CFG_ILPBCK(v) (((v) & 0x1) << 6) /* Internal loopback */
+#define AC_CFG_PRELEN(v) (((v) & 0x3) << 4) /* Preamble length */
+#define AC_CFG_PLEN_2 0 /* 2 bytes */
+#define AC_CFG_PLEN_4 1 /* 4 bytes */
+#define AC_CFG_PLEN_8 2 /* 8 bytes */
+#define AC_CFG_PLEN_16 3 /* 16 bytes */
+#define AC_CFG_ALOC(v) (((v) & 0x1) << 3) /* Addr/len data is */
+ /* explicit in buffers */
+#define AC_CFG_ADDRLEN(v) (((v) & 0x7) << 0) /* Bytes per address */
+ unsigned char cfg_byte10;
+#define AC_CFG_BOFMET(v) (((v) & 0x1) << 7) /* Use alternate expo. */
+ /* backoff method */
+#define AC_CFG_ACR(v) (((v) & 0x7) << 4) /* Accelerated cont. res. */
+#define AC_CFG_LINPRIO(v) (((v) & 0x7) << 0) /* Linear priority */
+ unsigned char cfg_ifs; /* Interframe spacing */
+ unsigned char cfg_slotl; /* Slot time (low byte) */
+ unsigned char cfg_byte13;
+#define AC_CFG_RETRYNUM(v) (((v) & 0xF) << 4) /* Max. collision retry */
+#define AC_CFG_SLTTMHI(v) (((v) & 0x7) << 0) /* Slot time (high bits) */
+ unsigned char cfg_byte14;
+#define AC_CFG_FLGPAD(v) (((v) & 0x1) << 7) /* Pad with HDLC flags */
+#define AC_CFG_BTSTF(v) (((v) & 0x1) << 6) /* Do HDLC bitstuffing */
+#define AC_CFG_CRC16(v) (((v) & 0x1) << 5) /* 16 bit CCITT CRC */
+#define AC_CFG_NCRC(v) (((v) & 0x1) << 4) /* Insert no CRC */
+#define AC_CFG_TNCRS(v) (((v) & 0x1) << 3) /* Tx even if no carrier */
+#define AC_CFG_MANCH(v) (((v) & 0x1) << 2) /* Manchester coding */
+#define AC_CFG_BCDIS(v) (((v) & 0x1) << 1) /* Disable broadcast */
+#define AC_CFG_PRM(v) (((v) & 0x1) << 0) /* Promiscuous mode */
+ unsigned char cfg_byte15;
+#define AC_CFG_ICDS(v) (((v) & 0x1) << 7) /* Internal collision */
+ /* detect source */
+#define AC_CFG_CDTF(v) (((v) & 0x7) << 4) /* Collision detect */
+ /* filter in bit times */
+#define AC_CFG_ICSS(v) (((v) & 0x1) << 3) /* Internal carrier */
+ /* sense source */
+#define AC_CFG_CSTF(v) (((v) & 0x7) << 0) /* Carrier sense */
+ /* filter in bit times */
+ unsigned short cfg_min_frm_len;
+#define AC_CFG_MNFRM(v) (((v) & 0xFF) << 0) /* Min. bytes/frame (<= 255) */
+};
+
+/*
+ * The MC-Setup Action Command.
+ */
+typedef struct ac_mcs_t ac_mcs_t;
+struct ac_mcs_t
+{
+ ach_t mcs_h;
+ unsigned short mcs_cnt; /* No. of bytes of MC addresses */
+#if 0
+ unsigned char mcs_data[ADDR_LEN]; /* The first MC address .. */
+ ...
+#endif
+};
+
+#define I82586_MAX_MULTICAST_ADDRESSES 128 /* Hardware hashed filter */
+
+/*
+ * The Transmit Action Command.
+ */
+typedef struct ac_tx_t ac_tx_t;
+struct ac_tx_t
+{
+ ach_t tx_h;
+ unsigned short tx_tbd_offset; /* Address of list of buffers. */
+#if 0
+Linux packets are passed down with the destination MAC address
+and length/type field already prepended to the data,
+so we do not need to insert it. Consistent with this
+we must also set the AC_CFG_ALOC(..) flag during the
+ac_cfg_t action command.
+ unsigned char tx_addr[ADDR_LEN]; /* The frame dest. address */
+ unsigned short tx_length; /* The frame length */
+#endif /* 0 */
+};
+
+/*
+ * The Time Domain Reflectometer Action Command.
+ */
+typedef struct ac_tdr_t ac_tdr_t;
+struct ac_tdr_t
+{
+ ach_t tdr_h;
+ unsigned short tdr_result; /* Result. */
+#define AC_TDR_LNK_OK (0x1 << 15) /* No link problem */
+#define AC_TDR_XCVR_PRB (0x1 << 14) /* Txcvr cable problem */
+#define AC_TDR_ET_OPN (0x1 << 13) /* Open on the link */
+#define AC_TDR_ET_SRT (0x1 << 12) /* Short on the link */
+#define AC_TDR_TIME (0x7FF << 0) /* Distance to problem */
+ /* site in transmit */
+ /* clock cycles */
+};
+
+/*
+ * The Dump Action Command.
+ */
+typedef struct ac_dmp_t ac_dmp_t;
+struct ac_dmp_t
+{
+ ach_t dmp_h;
+ unsigned short dmp_offset; /* Result. */
+};
+
+/*
+ * Size of the result of the dump command.
+ */
+#define DUMPBYTES 170
+
+/*
+ * The Diagnose Action Command.
+ */
+typedef struct ac_dgn_t ac_dgn_t;
+struct ac_dgn_t
+{
+ ach_t dgn_h;
+};
+
+/*
+ * Transmit Buffer Descriptor (TBD).
+ */
+typedef struct tbd_t tbd_t;
+struct tbd_t
+{
+ unsigned short tbd_status; /* Written by the CPU */
+#define TBD_STATUS_EOF (0x1 << 15) /* This TBD is the */
+ /* last for this frame */
+#define TBD_STATUS_ACNT (0x3FFF << 0) /* Actual count of data */
+ /* bytes in this buffer */
+ unsigned short tbd_next_bd_offset; /* Next in list */
+ unsigned short tbd_bufl; /* Buffer address (low) */
+ unsigned short tbd_bufh; /* " " (high) */
+};
+
+/*
+ * Receive Buffer Descriptor (RBD).
+ */
+typedef struct rbd_t rbd_t;
+struct rbd_t
+{
+ unsigned short rbd_status; /* Written by the 82586 */
+#define RBD_STATUS_EOF (0x1 << 15) /* This RBD is the */
+ /* last for this frame */
+#define RBD_STATUS_F (0x1 << 14) /* ACNT field is valid */
+#define RBD_STATUS_ACNT (0x3FFF << 0) /* Actual no. of data */
+ /* bytes in this buffer */
+ unsigned short rbd_next_rbd_offset; /* Next rbd in list */
+ unsigned short rbd_bufl; /* Data pointer (low) */
+ unsigned short rbd_bufh; /* " " (high) */
+ unsigned short rbd_el_size; /* EL+Data buf. size */
+#define RBD_EL (0x1 << 15) /* This BD is the */
+ /* last in the list */
+#define RBD_SIZE (0x3FFF << 0) /* No. of bytes the */
+ /* buffer can hold */
+};
+
+#define rbdoff(p,f) toff(rbd_t, p, f)
+
+/*
+ * Frame Descriptor (FD).
+ */
+typedef struct fd_t fd_t;
+struct fd_t
+{
+ unsigned short fd_status; /* Written by the 82586 */
+#define FD_STATUS_C (0x1 << 15) /* Completed storing frame */
+#define FD_STATUS_B (0x1 << 14) /* FD was consumed by RU */
+#define FD_STATUS_OK (0x1 << 13) /* Frame rxd successfully */
+#define FD_STATUS_S11 (0x1 << 11) /* CRC error */
+#define FD_STATUS_S10 (0x1 << 10) /* Alignment error */
+#define FD_STATUS_S9 (0x1 << 9) /* Ran out of resources */
+#define FD_STATUS_S8 (0x1 << 8) /* Rx DMA overrun */
+#define FD_STATUS_S7 (0x1 << 7) /* Frame too short */
+#define FD_STATUS_S6 (0x1 << 6) /* No EOF flag */
+ unsigned short fd_command; /* Command */
+#define FD_COMMAND_EL (0x1 << 15) /* Last FD in list */
+#define FD_COMMAND_S (0x1 << 14) /* Suspend RU after rx */
+ unsigned short fd_link_offset; /* Next FD */
+ unsigned short fd_rbd_offset; /* First RBD (data) */
+ /* Prepared by CPU, */
+ /* updated by 82586 */
+#if 0
+I think the rest is unused since we
+have set AC_CFG_ALOC(..). However, just
+in case, we leave the space.
+#endif /* 0 */
+ unsigned char fd_dest[ADDR_LEN]; /* Destination address */
+ /* Written by 82586 */
+ unsigned char fd_src[ADDR_LEN]; /* Source address */
+ /* Written by 82586 */
+ unsigned short fd_length; /* Frame length or type */
+ /* Written by 82586 */
+};
+
+#define fdoff(p,f) toff(fd_t, p, f)
+
+/*
+ * This software may only be used and distributed
+ * according to the terms of the GNU General Public License.
+ *
+ * For more details, see wavelan.c.
+ */
diff --git a/drivers/net/wireless/i82593.h b/drivers/net/wireless/i82593.h
new file mode 100644
index 0000000..33acb8a
--- /dev/null
+++ b/drivers/net/wireless/i82593.h
@@ -0,0 +1,224 @@
+/*
+ * Definitions for Intel 82593 CSMA/CD Core LAN Controller
+ * The definitions are taken from the 1992 users manual with Intel
+ * order number 297125-001.
+ *
+ * /usr/src/pc/RCS/i82593.h,v 1.1 1996/07/17 15:23:12 root Exp
+ *
+ * Copyright 1994, Anders Klemets <klemets@it.kth.se>
+ *
+ * This software may be freely distributed for noncommercial purposes
+ * as long as this notice is retained.
+ *
+ * HISTORY
+ * i82593.h,v
+ * Revision 1.1 1996/07/17 15:23:12 root
+ * Initial revision
+ *
+ * Revision 1.3 1995/04/05 15:13:58 adj
+ * Initial alpha release
+ *
+ * Revision 1.2 1994/06/16 23:57:31 klemets
+ * Mirrored all the fields in the configuration block.
+ *
+ * Revision 1.1 1994/06/02 20:25:34 klemets
+ * Initial revision
+ *
+ *
+ */
+#ifndef _I82593_H
+#define _I82593_H
+
+/* Intel 82593 CSMA/CD Core LAN Controller */
+
+/* Port 0 Command Register definitions */
+
+/* Execution operations */
+#define OP0_NOP 0 /* CHNL = 0 */
+#define OP0_SWIT_TO_PORT_1 0 /* CHNL = 1 */
+#define OP0_IA_SETUP 1
+#define OP0_CONFIGURE 2
+#define OP0_MC_SETUP 3
+#define OP0_TRANSMIT 4
+#define OP0_TDR 5
+#define OP0_DUMP 6
+#define OP0_DIAGNOSE 7
+#define OP0_TRANSMIT_NO_CRC 9
+#define OP0_RETRANSMIT 12
+#define OP0_ABORT 13
+/* Reception operations */
+#define OP0_RCV_ENABLE 8
+#define OP0_RCV_DISABLE 10
+#define OP0_STOP_RCV 11
+/* Status pointer control operations */
+#define OP0_FIX_PTR 15 /* CHNL = 1 */
+#define OP0_RLS_PTR 15 /* CHNL = 0 */
+#define OP0_RESET 14
+
+#define CR0_CHNL (1 << 4) /* 0=Channel 0, 1=Channel 1 */
+#define CR0_STATUS_0 0x00
+#define CR0_STATUS_1 0x20
+#define CR0_STATUS_2 0x40
+#define CR0_STATUS_3 0x60
+#define CR0_INT_ACK (1 << 7) /* 0=No ack, 1=acknowledge */
+
+/* Port 0 Status Register definitions */
+
+#define SR0_NO_RESULT 0 /* dummy */
+#define SR0_EVENT_MASK 0x0f
+#define SR0_IA_SETUP_DONE 1
+#define SR0_CONFIGURE_DONE 2
+#define SR0_MC_SETUP_DONE 3
+#define SR0_TRANSMIT_DONE 4
+#define SR0_TDR_DONE 5
+#define SR0_DUMP_DONE 6
+#define SR0_DIAGNOSE_PASSED 7
+#define SR0_TRANSMIT_NO_CRC_DONE 9
+#define SR0_RETRANSMIT_DONE 12
+#define SR0_EXECUTION_ABORTED 13
+#define SR0_END_OF_FRAME 8
+#define SR0_RECEPTION_ABORTED 10
+#define SR0_DIAGNOSE_FAILED 15
+#define SR0_STOP_REG_HIT 11
+
+#define SR0_CHNL (1 << 4)
+#define SR0_EXECUTION (1 << 5)
+#define SR0_RECEPTION (1 << 6)
+#define SR0_INTERRUPT (1 << 7)
+#define SR0_BOTH_RX_TX (SR0_EXECUTION | SR0_RECEPTION)
+
+#define SR3_EXEC_STATE_MASK 0x03
+#define SR3_EXEC_IDLE 0
+#define SR3_TX_ABORT_IN_PROGRESS 1
+#define SR3_EXEC_ACTIVE 2
+#define SR3_ABORT_IN_PROGRESS 3
+#define SR3_EXEC_CHNL (1 << 2)
+#define SR3_STP_ON_NO_RSRC (1 << 3)
+#define SR3_RCVING_NO_RSRC (1 << 4)
+#define SR3_RCV_STATE_MASK 0x60
+#define SR3_RCV_IDLE 0x00
+#define SR3_RCV_READY 0x20
+#define SR3_RCV_ACTIVE 0x40
+#define SR3_RCV_STOP_IN_PROG 0x60
+#define SR3_RCV_CHNL (1 << 7)
+
+/* Port 1 Command Register definitions */
+
+#define OP1_NOP 0
+#define OP1_SWIT_TO_PORT_0 1
+#define OP1_INT_DISABLE 2
+#define OP1_INT_ENABLE 3
+#define OP1_SET_TS 5
+#define OP1_RST_TS 7
+#define OP1_POWER_DOWN 8
+#define OP1_RESET_RING_MNGMT 11
+#define OP1_RESET 14
+#define OP1_SEL_RST 15
+
+#define CR1_STATUS_4 0x00
+#define CR1_STATUS_5 0x20
+#define CR1_STATUS_6 0x40
+#define CR1_STOP_REG_UPDATE (1 << 7)
+
+/* Receive frame status bits */
+
+#define RX_RCLD (1 << 0)
+#define RX_IA_MATCH (1 << 1)
+#define RX_NO_AD_MATCH (1 << 2)
+#define RX_NO_SFD (1 << 3)
+#define RX_SRT_FRM (1 << 7)
+#define RX_OVRRUN (1 << 8)
+#define RX_ALG_ERR (1 << 10)
+#define RX_CRC_ERR (1 << 11)
+#define RX_LEN_ERR (1 << 12)
+#define RX_RCV_OK (1 << 13)
+#define RX_TYP_LEN (1 << 15)
+
+/* Transmit status bits */
+
+#define TX_NCOL_MASK 0x0f
+#define TX_FRTL (1 << 4)
+#define TX_MAX_COL (1 << 5)
+#define TX_HRT_BEAT (1 << 6)
+#define TX_DEFER (1 << 7)
+#define TX_UND_RUN (1 << 8)
+#define TX_LOST_CTS (1 << 9)
+#define TX_LOST_CRS (1 << 10)
+#define TX_LTCOL (1 << 11)
+#define TX_OK (1 << 13)
+#define TX_COLL (1 << 15)
+
+struct i82593_conf_block {
+ u_char fifo_limit : 4,
+ forgnesi : 1,
+ fifo_32 : 1,
+ d6mod : 1,
+ throttle_enb : 1;
+ u_char throttle : 6,
+ cntrxint : 1,
+ contin : 1;
+ u_char addr_len : 3,
+ acloc : 1,
+ preamb_len : 2,
+ loopback : 2;
+ u_char lin_prio : 3,
+ tbofstop : 1,
+ exp_prio : 3,
+ bof_met : 1;
+ u_char : 4,
+ ifrm_spc : 4;
+ u_char : 5,
+ slottim_low : 3;
+ u_char slottim_hi : 3,
+ : 1,
+ max_retr : 4;
+ u_char prmisc : 1,
+ bc_dis : 1,
+ : 1,
+ crs_1 : 1,
+ nocrc_ins : 1,
+ crc_1632 : 1,
+ : 1,
+ crs_cdt : 1;
+ u_char cs_filter : 3,
+ crs_src : 1,
+ cd_filter : 3,
+ : 1;
+ u_char : 2,
+ min_fr_len : 6;
+ u_char lng_typ : 1,
+ lng_fld : 1,
+ rxcrc_xf : 1,
+ artx : 1,
+ sarec : 1,
+ tx_jabber : 1, /* why is this called max_len in the manual? */
+ hash_1 : 1,
+ lbpkpol : 1;
+ u_char : 6,
+ fdx : 1,
+ : 1;
+ u_char dummy_6 : 6, /* supposed to be ones */
+ mult_ia : 1,
+ dis_bof : 1;
+ u_char dummy_1 : 1, /* supposed to be one */
+ tx_ifs_retrig : 2,
+ mc_all : 1,
+ rcv_mon : 2,
+ frag_acpt : 1,
+ tstrttrs : 1;
+ u_char fretx : 1,
+ runt_eop : 1,
+ hw_sw_pin : 1,
+ big_endn : 1,
+ syncrqs : 1,
+ sttlen : 1,
+ tx_eop : 1,
+ rx_eop : 1;
+ u_char rbuf_size : 5,
+ rcvstop : 1,
+ : 2;
+};
+
+#define I82593_MAX_MULTICAST_ADDRESSES 128 /* Hardware hashed filter */
+
+#endif /* _I82593_H */
diff --git a/drivers/net/wireless/ieee802_11.h b/drivers/net/wireless/ieee802_11.h
new file mode 100644
index 0000000..53dd524
--- /dev/null
+++ b/drivers/net/wireless/ieee802_11.h
@@ -0,0 +1,78 @@
+#ifndef _IEEE802_11_H
+#define _IEEE802_11_H
+
+#define IEEE802_11_DATA_LEN 2304
+/* Maximum size for the MA-UNITDATA primitive, 802.11 standard section
+ 6.2.1.1.2.
+
+ The figure in section 7.1.2 suggests a body size of up to 2312
+ bytes is allowed, which is a bit confusing, I suspect this
+ represents the 2304 bytes of real data, plus a possible 8 bytes of
+ WEP IV and ICV. (this interpretation suggested by Ramiro Barreiro) */
+
+
+#define IEEE802_11_HLEN 30
+#define IEEE802_11_FRAME_LEN (IEEE802_11_DATA_LEN + IEEE802_11_HLEN)
+
+struct ieee802_11_hdr {
+ u16 frame_ctl;
+ u16 duration_id;
+ u8 addr1[ETH_ALEN];
+ u8 addr2[ETH_ALEN];
+ u8 addr3[ETH_ALEN];
+ u16 seq_ctl;
+ u8 addr4[ETH_ALEN];
+} __attribute__ ((packed));
+
+/* Frame control field constants */
+#define IEEE802_11_FCTL_VERS 0x0002
+#define IEEE802_11_FCTL_FTYPE 0x000c
+#define IEEE802_11_FCTL_STYPE 0x00f0
+#define IEEE802_11_FCTL_TODS 0x0100
+#define IEEE802_11_FCTL_FROMDS 0x0200
+#define IEEE802_11_FCTL_MOREFRAGS 0x0400
+#define IEEE802_11_FCTL_RETRY 0x0800
+#define IEEE802_11_FCTL_PM 0x1000
+#define IEEE802_11_FCTL_MOREDATA 0x2000
+#define IEEE802_11_FCTL_WEP 0x4000
+#define IEEE802_11_FCTL_ORDER 0x8000
+
+#define IEEE802_11_FTYPE_MGMT 0x0000
+#define IEEE802_11_FTYPE_CTL 0x0004
+#define IEEE802_11_FTYPE_DATA 0x0008
+
+/* management */
+#define IEEE802_11_STYPE_ASSOC_REQ 0x0000
+#define IEEE802_11_STYPE_ASSOC_RESP 0x0010
+#define IEEE802_11_STYPE_REASSOC_REQ 0x0020
+#define IEEE802_11_STYPE_REASSOC_RESP 0x0030
+#define IEEE802_11_STYPE_PROBE_REQ 0x0040
+#define IEEE802_11_STYPE_PROBE_RESP 0x0050
+#define IEEE802_11_STYPE_BEACON 0x0080
+#define IEEE802_11_STYPE_ATIM 0x0090
+#define IEEE802_11_STYPE_DISASSOC 0x00A0
+#define IEEE802_11_STYPE_AUTH 0x00B0
+#define IEEE802_11_STYPE_DEAUTH 0x00C0
+
+/* control */
+#define IEEE802_11_STYPE_PSPOLL 0x00A0
+#define IEEE802_11_STYPE_RTS 0x00B0
+#define IEEE802_11_STYPE_CTS 0x00C0
+#define IEEE802_11_STYPE_ACK 0x00D0
+#define IEEE802_11_STYPE_CFEND 0x00E0
+#define IEEE802_11_STYPE_CFENDACK 0x00F0
+
+/* data */
+#define IEEE802_11_STYPE_DATA 0x0000
+#define IEEE802_11_STYPE_DATA_CFACK 0x0010
+#define IEEE802_11_STYPE_DATA_CFPOLL 0x0020
+#define IEEE802_11_STYPE_DATA_CFACKPOLL 0x0030
+#define IEEE802_11_STYPE_NULLFUNC 0x0040
+#define IEEE802_11_STYPE_CFACK 0x0050
+#define IEEE802_11_STYPE_CFPOLL 0x0060
+#define IEEE802_11_STYPE_CFACKPOLL 0x0070
+
+#define IEEE802_11_SCTL_FRAG 0x000F
+#define IEEE802_11_SCTL_SEQ 0xFFF0
+
+#endif /* _IEEE802_11_H */
diff --git a/drivers/net/wireless/netwave_cs.c b/drivers/net/wireless/netwave_cs.c
new file mode 100644
index 0000000..382241e
--- /dev/null
+++ b/drivers/net/wireless/netwave_cs.c
@@ -0,0 +1,1736 @@
+/*********************************************************************
+ *
+ * Filename: netwave_cs.c
+ * Version: 0.4.1
+ * Description: Netwave AirSurfer Wireless LAN PC Card driver
+ * Status: Experimental.
+ * Authors: John Markus Bjørndalen <johnm@cs.uit.no>
+ * Dag Brattli <dagb@cs.uit.no>
+ * David Hinds <dahinds@users.sourceforge.net>
+ * Created at: A long time ago!
+ * Modified at: Mon Nov 10 11:54:37 1997
+ * Modified by: Dag Brattli <dagb@cs.uit.no>
+ *
+ * Copyright (c) 1997 University of Tromsø, Norway
+ *
+ * Revision History:
+ *
+ * 08-Nov-97 15:14:47 John Markus Bjørndalen <johnm@cs.uit.no>
+ * - Fixed some bugs in netwave_rx and cleaned it up a bit.
+ * (One of the bugs would have destroyed packets when receiving
+ * multiple packets per interrupt).
+ * - Cleaned up parts of newave_hw_xmit.
+ * - A few general cleanups.
+ * 24-Oct-97 13:17:36 Dag Brattli <dagb@cs.uit.no>
+ * - Fixed netwave_rx receive function (got updated docs)
+ * Others:
+ * - Changed name from xircnw to netwave, take a look at
+ * http://www.netwave-wireless.com
+ * - Some reorganizing of the code
+ * - Removed possible race condition between interrupt handler and transmit
+ * function
+ * - Started to add wireless extensions, but still needs some coding
+ * - Added watchdog for better handling of transmission timeouts
+ * (hopefully this works better)
+ ********************************************************************/
+
+/* To have statistics (just packets sent) define this */
+#undef NETWAVE_STATS
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/fcntl.h>
+#include <linux/interrupt.h>
+#include <linux/ptrace.h>
+#include <linux/ioport.h>
+#include <linux/in.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/errno.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/bitops.h>
+#ifdef CONFIG_NET_RADIO
+#include <linux/wireless.h>
+#if WIRELESS_EXT > 12
+#include <net/iw_handler.h>
+#endif /* WIRELESS_EXT > 12 */
+#endif
+
+#include <pcmcia/version.h>
+#include <pcmcia/cs_types.h>
+#include <pcmcia/cs.h>
+#include <pcmcia/cistpl.h>
+#include <pcmcia/cisreg.h>
+#include <pcmcia/ds.h>
+#include <pcmcia/mem_op.h>
+
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/dma.h>
+
+#define NETWAVE_REGOFF 0x8000
+/* The Netwave IO registers, offsets to iobase */
+#define NETWAVE_REG_COR 0x0
+#define NETWAVE_REG_CCSR 0x2
+#define NETWAVE_REG_ASR 0x4
+#define NETWAVE_REG_IMR 0xa
+#define NETWAVE_REG_PMR 0xc
+#define NETWAVE_REG_IOLOW 0x6
+#define NETWAVE_REG_IOHI 0x7
+#define NETWAVE_REG_IOCONTROL 0x8
+#define NETWAVE_REG_DATA 0xf
+/* The Netwave Extended IO registers, offsets to RamBase */
+#define NETWAVE_EREG_ASCC 0x114
+#define NETWAVE_EREG_RSER 0x120
+#define NETWAVE_EREG_RSERW 0x124
+#define NETWAVE_EREG_TSER 0x130
+#define NETWAVE_EREG_TSERW 0x134
+#define NETWAVE_EREG_CB 0x100
+#define NETWAVE_EREG_SPCQ 0x154
+#define NETWAVE_EREG_SPU 0x155
+#define NETWAVE_EREG_LIF 0x14e
+#define NETWAVE_EREG_ISPLQ 0x156
+#define NETWAVE_EREG_HHC 0x158
+#define NETWAVE_EREG_NI 0x16e
+#define NETWAVE_EREG_MHS 0x16b
+#define NETWAVE_EREG_TDP 0x140
+#define NETWAVE_EREG_RDP 0x150
+#define NETWAVE_EREG_PA 0x160
+#define NETWAVE_EREG_EC 0x180
+#define NETWAVE_EREG_CRBP 0x17a
+#define NETWAVE_EREG_ARW 0x166
+
+/*
+ * Commands used in the extended command buffer
+ * NETWAVE_EREG_CB (0x100-0x10F)
+ */
+#define NETWAVE_CMD_NOP 0x00
+#define NETWAVE_CMD_SRC 0x01
+#define NETWAVE_CMD_STC 0x02
+#define NETWAVE_CMD_AMA 0x03
+#define NETWAVE_CMD_DMA 0x04
+#define NETWAVE_CMD_SAMA 0x05
+#define NETWAVE_CMD_ER 0x06
+#define NETWAVE_CMD_DR 0x07
+#define NETWAVE_CMD_TL 0x08
+#define NETWAVE_CMD_SRP 0x09
+#define NETWAVE_CMD_SSK 0x0a
+#define NETWAVE_CMD_SMD 0x0b
+#define NETWAVE_CMD_SAPD 0x0c
+#define NETWAVE_CMD_SSS 0x11
+/* End of Command marker */
+#define NETWAVE_CMD_EOC 0x00
+
+/* ASR register bits */
+#define NETWAVE_ASR_RXRDY 0x80
+#define NETWAVE_ASR_TXBA 0x01
+
+#define TX_TIMEOUT ((32*HZ)/100)
+
+static const unsigned int imrConfRFU1 = 0x10; /* RFU interrupt mask, keep high */
+static const unsigned int imrConfIENA = 0x02; /* Interrupt enable */
+
+static const unsigned int corConfIENA = 0x01; /* Interrupt enable */
+static const unsigned int corConfLVLREQ = 0x40; /* Keep high */
+
+static const unsigned int rxConfRxEna = 0x80; /* Receive Enable */
+static const unsigned int rxConfMAC = 0x20; /* MAC host receive mode*/
+static const unsigned int rxConfPro = 0x10; /* Promiscuous */
+static const unsigned int rxConfAMP = 0x08; /* Accept Multicast Packets */
+static const unsigned int rxConfBcast = 0x04; /* Accept Broadcast Packets */
+
+static const unsigned int txConfTxEna = 0x80; /* Transmit Enable */
+static const unsigned int txConfMAC = 0x20; /* Host sends MAC mode */
+static const unsigned int txConfEUD = 0x10; /* Enable Uni-Data packets */
+static const unsigned int txConfKey = 0x02; /* Scramble data packets */
+static const unsigned int txConfLoop = 0x01; /* Loopback mode */
+
+/*
+ All the PCMCIA modules use PCMCIA_DEBUG to control debugging. If
+ you do not define PCMCIA_DEBUG at all, all the debug code will be
+ left out. If you compile with PCMCIA_DEBUG=0, the debug code will
+ be present but disabled -- but it can then be enabled for specific
+ modules at load time with a 'pc_debug=#' option to insmod.
+*/
+
+#ifdef PCMCIA_DEBUG
+static int pc_debug = PCMCIA_DEBUG;
+module_param(pc_debug, int, 0);
+#define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args)
+static char *version =
+"netwave_cs.c 0.3.0 Thu Jul 17 14:36:02 1997 (John Markus Bjørndalen)\n";
+#else
+#define DEBUG(n, args...)
+#endif
+
+static dev_info_t dev_info = "netwave_cs";
+
+/*====================================================================*/
+
+/* Parameters that can be set with 'insmod' */
+
+/* Choose the domain, default is 0x100 */
+static u_int domain = 0x100;
+
+/* Scramble key, range from 0x0 to 0xffff.
+ * 0x0 is no scrambling.
+ */
+static u_int scramble_key = 0x0;
+
+/* Shared memory speed, in ns. The documentation states that
+ * the card should not be read faster than every 400ns.
+ * This timing should be provided by the HBA. If it becomes a
+ * problem, try setting mem_speed to 400.
+ */
+static int mem_speed;
+
+module_param(domain, int, 0);
+module_param(scramble_key, int, 0);
+module_param(mem_speed, int, 0);
+
+/*====================================================================*/
+
+/* PCMCIA (Card Services) related functions */
+static void netwave_release(dev_link_t *link); /* Card removal */
+static int netwave_event(event_t event, int priority,
+ event_callback_args_t *args);
+static void netwave_pcmcia_config(dev_link_t *arg); /* Runs after card
+ insertion */
+static dev_link_t *netwave_attach(void); /* Create instance */
+static void netwave_detach(dev_link_t *); /* Destroy instance */
+
+/* Hardware configuration */
+static void netwave_doreset(kio_addr_t iobase, u_char __iomem *ramBase);
+static void netwave_reset(struct net_device *dev);
+
+/* Misc device stuff */
+static int netwave_open(struct net_device *dev); /* Open the device */
+static int netwave_close(struct net_device *dev); /* Close the device */
+
+/* Packet transmission and Packet reception */
+static int netwave_start_xmit( struct sk_buff *skb, struct net_device *dev);
+static int netwave_rx( struct net_device *dev);
+
+/* Interrupt routines */
+static irqreturn_t netwave_interrupt(int irq, void *dev_id, struct pt_regs *regs);
+static void netwave_watchdog(struct net_device *);
+
+/* Statistics */
+static void update_stats(struct net_device *dev);
+static struct net_device_stats *netwave_get_stats(struct net_device *dev);
+
+/* Wireless extensions */
+#ifdef WIRELESS_EXT
+static struct iw_statistics* netwave_get_wireless_stats(struct net_device *dev);
+#endif
+static int netwave_ioctl(struct net_device *, struct ifreq *, int);
+
+static void set_multicast_list(struct net_device *dev);
+
+/*
+ A linked list of "instances" of the skeleton device. Each actual
+ PCMCIA card corresponds to one device instance, and is described
+ by one dev_link_t structure (defined in ds.h).
+
+ You may not want to use a linked list for this -- for example, the
+ memory card driver uses an array of dev_link_t pointers, where minor
+ device numbers are used to derive the corresponding array index.
+*/
+static dev_link_t *dev_list;
+
+/*
+ A dev_link_t structure has fields for most things that are needed
+ to keep track of a socket, but there will usually be some device
+ specific information that also needs to be kept track of. The
+ 'priv' pointer in a dev_link_t structure can be used to point to
+ a device-specific private data structure, like this.
+
+ A driver needs to provide a dev_node_t structure for each device
+ on a card. In some cases, there is only one device per card (for
+ example, ethernet cards, modems). In other cases, there may be
+ many actual or logical devices (SCSI adapters, memory cards with
+ multiple partitions). The dev_node_t structures need to be kept
+ in a linked list starting at the 'dev' field of a dev_link_t
+ structure. We allocate them in the card's private data structure,
+ because they generally can't be allocated dynamically.
+*/
+
+#if WIRELESS_EXT <= 12
+/* Wireless extensions backward compatibility */
+
+/* Part of iw_handler prototype we need */
+struct iw_request_info
+{
+ __u16 cmd; /* Wireless Extension command */
+ __u16 flags; /* More to come ;-) */
+};
+
+/* Wireless Extension Backward compatibility - Jean II
+ * If the new wireless device private ioctl range is not defined,
+ * default to standard device private ioctl range */
+#ifndef SIOCIWFIRSTPRIV
+#define SIOCIWFIRSTPRIV SIOCDEVPRIVATE
+#endif /* SIOCIWFIRSTPRIV */
+
+#else /* WIRELESS_EXT <= 12 */
+static const struct iw_handler_def netwave_handler_def;
+#endif /* WIRELESS_EXT <= 12 */
+
+#define SIOCGIPSNAP SIOCIWFIRSTPRIV + 1 /* Site Survey Snapshot */
+
+#define MAX_ESA 10
+
+typedef struct net_addr {
+ u_char addr48[6];
+} net_addr;
+
+struct site_survey {
+ u_short length;
+ u_char struct_revision;
+ u_char roaming_state;
+
+ u_char sp_existsFlag;
+ u_char sp_link_quality;
+ u_char sp_max_link_quality;
+ u_char linkQualityGoodFairBoundary;
+ u_char linkQualityFairPoorBoundary;
+ u_char sp_utilization;
+ u_char sp_goodness;
+ u_char sp_hotheadcount;
+ u_char roaming_condition;
+
+ net_addr sp;
+ u_char numAPs;
+ net_addr nearByAccessPoints[MAX_ESA];
+};
+
+typedef struct netwave_private {
+ dev_link_t link;
+ spinlock_t spinlock; /* Serialize access to the hardware (SMP) */
+ dev_node_t node;
+ u_char __iomem *ramBase;
+ int timeoutCounter;
+ int lastExec;
+ struct timer_list watchdog; /* To avoid blocking state */
+ struct site_survey nss;
+ struct net_device_stats stats;
+#ifdef WIRELESS_EXT
+ struct iw_statistics iw_stats; /* Wireless stats */
+#endif
+} netwave_private;
+
+#ifdef NETWAVE_STATS
+static struct net_device_stats *netwave_get_stats(struct net_device *dev);
+#endif
+
+/*
+ * The Netwave card is little-endian, so won't work for big endian
+ * systems.
+ */
+static inline unsigned short get_uint16(u_char __iomem *staddr)
+{
+ return readw(staddr); /* Return only 16 bits */
+}
+
+static inline short get_int16(u_char __iomem * staddr)
+{
+ return readw(staddr);
+}
+
+/*
+ * Wait until the WOC (Write Operation Complete) bit in the
+ * ASR (Adapter Status Register) is asserted.
+ * This should have aborted if it takes too long time.
+ */
+static inline void wait_WOC(unsigned int iobase)
+{
+ /* Spin lock */
+ while ((inb(iobase + NETWAVE_REG_ASR) & 0x8) != 0x8) ;
+}
+
+#ifdef WIRELESS_EXT
+static void netwave_snapshot(netwave_private *priv, u_char __iomem *ramBase,
+ kio_addr_t iobase) {
+ u_short resultBuffer;
+
+ /* if time since last snapshot is > 1 sec. (100 jiffies?) then take
+ * new snapshot, else return cached data. This is the recommended rate.
+ */
+ if ( jiffies - priv->lastExec > 100) {
+ /* Take site survey snapshot */
+ /*printk( KERN_DEBUG "Taking new snapshot. %ld\n", jiffies -
+ priv->lastExec); */
+ wait_WOC(iobase);
+ writeb(NETWAVE_CMD_SSS, ramBase + NETWAVE_EREG_CB + 0);
+ writeb(NETWAVE_CMD_EOC, ramBase + NETWAVE_EREG_CB + 1);
+ wait_WOC(iobase);
+
+ /* Get result and copy to cach */
+ resultBuffer = readw(ramBase + NETWAVE_EREG_CRBP);
+ copy_from_pc( &priv->nss, ramBase+resultBuffer,
+ sizeof(struct site_survey));
+ }
+}
+#endif
+
+#ifdef WIRELESS_EXT
+/*
+ * Function netwave_get_wireless_stats (dev)
+ *
+ * Wireless extensions statistics
+ *
+ */
+static struct iw_statistics *netwave_get_wireless_stats(struct net_device *dev)
+{
+ unsigned long flags;
+ kio_addr_t iobase = dev->base_addr;
+ netwave_private *priv = netdev_priv(dev);
+ u_char __iomem *ramBase = priv->ramBase;
+ struct iw_statistics* wstats;
+
+ wstats = &priv->iw_stats;
+
+ spin_lock_irqsave(&priv->spinlock, flags);
+
+ netwave_snapshot( priv, ramBase, iobase);
+
+ wstats->status = priv->nss.roaming_state;
+ wstats->qual.qual = readb( ramBase + NETWAVE_EREG_SPCQ);
+ wstats->qual.level = readb( ramBase + NETWAVE_EREG_ISPLQ);
+ wstats->qual.noise = readb( ramBase + NETWAVE_EREG_SPU) & 0x3f;
+ wstats->discard.nwid = 0L;
+ wstats->discard.code = 0L;
+ wstats->discard.misc = 0L;
+
+ spin_unlock_irqrestore(&priv->spinlock, flags);
+
+ return &priv->iw_stats;
+}
+#endif
+
+/*
+ * Function netwave_attach (void)
+ *
+ * Creates an "instance" of the driver, allocating local data
+ * structures for one device. The device is registered with Card
+ * Services.
+ *
+ * The dev_link structure is initialized, but we don't actually
+ * configure the card at this point -- we wait until we receive a
+ * card insertion event.
+ */
+static dev_link_t *netwave_attach(void)
+{
+ client_reg_t client_reg;
+ dev_link_t *link;
+ struct net_device *dev;
+ netwave_private *priv;
+ int ret;
+
+ DEBUG(0, "netwave_attach()\n");
+
+ /* Initialize the dev_link_t structure */
+ dev = alloc_etherdev(sizeof(netwave_private));
+ if (!dev)
+ return NULL;
+ priv = netdev_priv(dev);
+ link = &priv->link;
+ link->priv = dev;
+
+ /* The io structure describes IO port mapping */
+ link->io.NumPorts1 = 16;
+ link->io.Attributes1 = IO_DATA_PATH_WIDTH_16;
+ /* link->io.NumPorts2 = 16;
+ link->io.Attributes2 = IO_DATA_PATH_WIDTH_16; */
+ link->io.IOAddrLines = 5;
+
+ /* Interrupt setup */
+ link->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT;
+ link->irq.IRQInfo1 = IRQ_LEVEL_ID;
+ link->irq.Handler = &netwave_interrupt;
+
+ /* General socket configuration */
+ link->conf.Attributes = CONF_ENABLE_IRQ;
+ link->conf.Vcc = 50;
+ link->conf.IntType = INT_MEMORY_AND_IO;
+ link->conf.ConfigIndex = 1;
+ link->conf.Present = PRESENT_OPTION;
+
+ /* Netwave private struct init. link/dev/node already taken care of,
+ * other stuff zero'd - Jean II */
+ spin_lock_init(&priv->spinlock);
+
+ /* Netwave specific entries in the device structure */
+ SET_MODULE_OWNER(dev);
+ dev->hard_start_xmit = &netwave_start_xmit;
+ dev->get_stats = &netwave_get_stats;
+ dev->set_multicast_list = &set_multicast_list;
+ /* wireless extensions */
+#ifdef WIRELESS_EXT
+ dev->get_wireless_stats = &netwave_get_wireless_stats;
+#if WIRELESS_EXT > 12
+ dev->wireless_handlers = (struct iw_handler_def *)&netwave_handler_def;
+#endif /* WIRELESS_EXT > 12 */
+#endif /* WIRELESS_EXT */
+ dev->do_ioctl = &netwave_ioctl;
+
+ dev->tx_timeout = &netwave_watchdog;
+ dev->watchdog_timeo = TX_TIMEOUT;
+
+ dev->open = &netwave_open;
+ dev->stop = &netwave_close;
+ link->irq.Instance = dev;
+
+ /* Register with Card Services */
+ link->next = dev_list;
+ dev_list = link;
+ client_reg.dev_info = &dev_info;
+ client_reg.EventMask =
+ CS_EVENT_CARD_INSERTION | CS_EVENT_CARD_REMOVAL |
+ CS_EVENT_RESET_PHYSICAL | CS_EVENT_CARD_RESET |
+ CS_EVENT_PM_SUSPEND | CS_EVENT_PM_RESUME;
+ client_reg.event_handler = &netwave_event;
+ client_reg.Version = 0x0210;
+ client_reg.event_callback_args.client_data = link;
+ ret = pcmcia_register_client(&link->handle, &client_reg);
+ if (ret != 0) {
+ cs_error(link->handle, RegisterClient, ret);
+ netwave_detach(link);
+ return NULL;
+ }
+
+ return link;
+} /* netwave_attach */
+
+/*
+ * Function netwave_detach (link)
+ *
+ * This deletes a driver "instance". The device is de-registered
+ * with Card Services. If it has been released, all local data
+ * structures are freed. Otherwise, the structures will be freed
+ * when the device is released.
+ */
+static void netwave_detach(dev_link_t *link)
+{
+ struct net_device *dev = link->priv;
+ dev_link_t **linkp;
+
+ DEBUG(0, "netwave_detach(0x%p)\n", link);
+
+ /*
+ If the device is currently configured and active, we won't
+ actually delete it yet. Instead, it is marked so that when
+ the release() function is called, that will trigger a proper
+ detach().
+ */
+ if (link->state & DEV_CONFIG)
+ netwave_release(link);
+
+ /* Break the link with Card Services */
+ if (link->handle)
+ pcmcia_deregister_client(link->handle);
+
+ /* Locate device structure */
+ for (linkp = &dev_list; *linkp; linkp = &(*linkp)->next)
+ if (*linkp == link) break;
+ if (*linkp == NULL)
+ {
+ DEBUG(1, "netwave_cs: detach fail, '%s' not in list\n",
+ link->dev->dev_name);
+ return;
+ }
+
+ /* Unlink device structure, free pieces */
+ *linkp = link->next;
+ if (link->dev)
+ unregister_netdev(dev);
+ free_netdev(dev);
+
+} /* netwave_detach */
+
+/*
+ * Wireless Handler : get protocol name
+ */
+static int netwave_get_name(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *extra)
+{
+ strcpy(wrqu->name, "Netwave");
+ return 0;
+}
+
+/*
+ * Wireless Handler : set Network ID
+ */
+static int netwave_set_nwid(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *extra)
+{
+ unsigned long flags;
+ kio_addr_t iobase = dev->base_addr;
+ netwave_private *priv = netdev_priv(dev);
+ u_char __iomem *ramBase = priv->ramBase;
+
+ /* Disable interrupts & save flags */
+ spin_lock_irqsave(&priv->spinlock, flags);
+
+#if WIRELESS_EXT > 8
+ if(!wrqu->nwid.disabled) {
+ domain = wrqu->nwid.value;
+#else /* WIRELESS_EXT > 8 */
+ if(wrqu->nwid.on) {
+ domain = wrqu->nwid.nwid;
+#endif /* WIRELESS_EXT > 8 */
+ printk( KERN_DEBUG "Setting domain to 0x%x%02x\n",
+ (domain >> 8) & 0x01, domain & 0xff);
+ wait_WOC(iobase);
+ writeb(NETWAVE_CMD_SMD, ramBase + NETWAVE_EREG_CB + 0);
+ writeb( domain & 0xff, ramBase + NETWAVE_EREG_CB + 1);
+ writeb((domain >>8 ) & 0x01,ramBase + NETWAVE_EREG_CB+2);
+ writeb(NETWAVE_CMD_EOC, ramBase + NETWAVE_EREG_CB + 3);
+ }
+
+ /* ReEnable interrupts & restore flags */
+ spin_unlock_irqrestore(&priv->spinlock, flags);
+
+ return 0;
+}
+
+/*
+ * Wireless Handler : get Network ID
+ */
+static int netwave_get_nwid(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *extra)
+{
+#if WIRELESS_EXT > 8
+ wrqu->nwid.value = domain;
+ wrqu->nwid.disabled = 0;
+ wrqu->nwid.fixed = 1;
+#else /* WIRELESS_EXT > 8 */
+ wrqu->nwid.nwid = domain;
+ wrqu->nwid.on = 1;
+#endif /* WIRELESS_EXT > 8 */
+
+ return 0;
+}
+
+/*
+ * Wireless Handler : set scramble key
+ */
+static int netwave_set_scramble(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *key)
+{
+ unsigned long flags;
+ kio_addr_t iobase = dev->base_addr;
+ netwave_private *priv = netdev_priv(dev);
+ u_char __iomem *ramBase = priv->ramBase;
+
+ /* Disable interrupts & save flags */
+ spin_lock_irqsave(&priv->spinlock, flags);
+
+ scramble_key = (key[0] << 8) | key[1];
+ wait_WOC(iobase);
+ writeb(NETWAVE_CMD_SSK, ramBase + NETWAVE_EREG_CB + 0);
+ writeb(scramble_key & 0xff, ramBase + NETWAVE_EREG_CB + 1);
+ writeb((scramble_key>>8) & 0xff, ramBase + NETWAVE_EREG_CB + 2);
+ writeb(NETWAVE_CMD_EOC, ramBase + NETWAVE_EREG_CB + 3);
+
+ /* ReEnable interrupts & restore flags */
+ spin_unlock_irqrestore(&priv->spinlock, flags);
+
+ return 0;
+}
+
+/*
+ * Wireless Handler : get scramble key
+ */
+static int netwave_get_scramble(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *key)
+{
+ key[1] = scramble_key & 0xff;
+ key[0] = (scramble_key>>8) & 0xff;
+#if WIRELESS_EXT > 8
+ wrqu->encoding.flags = IW_ENCODE_ENABLED;
+ wrqu->encoding.length = 2;
+#else /* WIRELESS_EXT > 8 */
+ wrqu->encoding.method = 1;
+#endif /* WIRELESS_EXT > 8 */
+
+ return 0;
+}
+
+#if WIRELESS_EXT > 8
+/*
+ * Wireless Handler : get mode
+ */
+static int netwave_get_mode(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *extra)
+{
+ if(domain & 0x100)
+ wrqu->mode = IW_MODE_INFRA;
+ else
+ wrqu->mode = IW_MODE_ADHOC;
+
+ return 0;
+}
+#endif /* WIRELESS_EXT > 8 */
+
+/*
+ * Wireless Handler : get range info
+ */
+static int netwave_get_range(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *extra)
+{
+ struct iw_range *range = (struct iw_range *) extra;
+ int ret = 0;
+
+ /* Set the length (very important for backward compatibility) */
+ wrqu->data.length = sizeof(struct iw_range);
+
+ /* Set all the info we don't care or don't know about to zero */
+ memset(range, 0, sizeof(struct iw_range));
+
+#if WIRELESS_EXT > 10
+ /* Set the Wireless Extension versions */
+ range->we_version_compiled = WIRELESS_EXT;
+ range->we_version_source = 9; /* Nothing for us in v10 and v11 */
+#endif /* WIRELESS_EXT > 10 */
+
+ /* Set information in the range struct */
+ range->throughput = 450 * 1000; /* don't argue on this ! */
+ range->min_nwid = 0x0000;
+ range->max_nwid = 0x01FF;
+
+ range->num_channels = range->num_frequency = 0;
+
+ range->sensitivity = 0x3F;
+ range->max_qual.qual = 255;
+ range->max_qual.level = 255;
+ range->max_qual.noise = 0;
+
+#if WIRELESS_EXT > 7
+ range->num_bitrates = 1;
+ range->bitrate[0] = 1000000; /* 1 Mb/s */
+#endif /* WIRELESS_EXT > 7 */
+
+#if WIRELESS_EXT > 8
+ range->encoding_size[0] = 2; /* 16 bits scrambling */
+ range->num_encoding_sizes = 1;
+ range->max_encoding_tokens = 1; /* Only one key possible */
+#endif /* WIRELESS_EXT > 8 */
+
+ return ret;
+}
+
+/*
+ * Wireless Private Handler : get snapshot
+ */
+static int netwave_get_snap(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *extra)
+{
+ unsigned long flags;
+ kio_addr_t iobase = dev->base_addr;
+ netwave_private *priv = netdev_priv(dev);
+ u_char __iomem *ramBase = priv->ramBase;
+
+ /* Disable interrupts & save flags */
+ spin_lock_irqsave(&priv->spinlock, flags);
+
+ /* Take snapshot of environment */
+ netwave_snapshot( priv, ramBase, iobase);
+ wrqu->data.length = priv->nss.length;
+ memcpy(extra, (u_char *) &priv->nss, sizeof( struct site_survey));
+
+ priv->lastExec = jiffies;
+
+ /* ReEnable interrupts & restore flags */
+ spin_unlock_irqrestore(&priv->spinlock, flags);
+
+ return(0);
+}
+
+/*
+ * Structures to export the Wireless Handlers
+ * This is the stuff that are treated the wireless extensions (iwconfig)
+ */
+
+static const struct iw_priv_args netwave_private_args[] = {
+/*{ cmd, set_args, get_args, name } */
+ { SIOCGIPSNAP, 0,
+ IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | sizeof(struct site_survey),
+ "getsitesurvey" },
+};
+
+#if WIRELESS_EXT > 12
+
+static const iw_handler netwave_handler[] =
+{
+ NULL, /* SIOCSIWNAME */
+ netwave_get_name, /* SIOCGIWNAME */
+ netwave_set_nwid, /* SIOCSIWNWID */
+ netwave_get_nwid, /* SIOCGIWNWID */
+ NULL, /* SIOCSIWFREQ */
+ NULL, /* SIOCGIWFREQ */
+ NULL, /* SIOCSIWMODE */
+ netwave_get_mode, /* SIOCGIWMODE */
+ NULL, /* SIOCSIWSENS */
+ NULL, /* SIOCGIWSENS */
+ NULL, /* SIOCSIWRANGE */
+ netwave_get_range, /* SIOCGIWRANGE */
+ NULL, /* SIOCSIWPRIV */
+ NULL, /* SIOCGIWPRIV */
+ NULL, /* SIOCSIWSTATS */
+ NULL, /* SIOCGIWSTATS */
+ NULL, /* SIOCSIWSPY */
+ NULL, /* SIOCGIWSPY */
+ NULL, /* -- hole -- */
+ NULL, /* -- hole -- */
+ NULL, /* SIOCSIWAP */
+ NULL, /* SIOCGIWAP */
+ NULL, /* -- hole -- */
+ NULL, /* SIOCGIWAPLIST */
+ NULL, /* -- hole -- */
+ NULL, /* -- hole -- */
+ NULL, /* SIOCSIWESSID */
+ NULL, /* SIOCGIWESSID */
+ NULL, /* SIOCSIWNICKN */
+ NULL, /* SIOCGIWNICKN */
+ NULL, /* -- hole -- */
+ NULL, /* -- hole -- */
+ NULL, /* SIOCSIWRATE */
+ NULL, /* SIOCGIWRATE */
+ NULL, /* SIOCSIWRTS */
+ NULL, /* SIOCGIWRTS */
+ NULL, /* SIOCSIWFRAG */
+ NULL, /* SIOCGIWFRAG */
+ NULL, /* SIOCSIWTXPOW */
+ NULL, /* SIOCGIWTXPOW */
+ NULL, /* SIOCSIWRETRY */
+ NULL, /* SIOCGIWRETRY */
+ netwave_set_scramble, /* SIOCSIWENCODE */
+ netwave_get_scramble, /* SIOCGIWENCODE */
+};
+
+static const iw_handler netwave_private_handler[] =
+{
+ NULL, /* SIOCIWFIRSTPRIV */
+ netwave_get_snap, /* SIOCIWFIRSTPRIV + 1 */
+};
+
+static const struct iw_handler_def netwave_handler_def =
+{
+ .num_standard = sizeof(netwave_handler)/sizeof(iw_handler),
+ .num_private = sizeof(netwave_private_handler)/sizeof(iw_handler),
+ .num_private_args = sizeof(netwave_private_args)/sizeof(struct iw_priv_args),
+ .standard = (iw_handler *) netwave_handler,
+ .private = (iw_handler *) netwave_private_handler,
+ .private_args = (struct iw_priv_args *) netwave_private_args,
+};
+#endif /* WIRELESS_EXT > 12 */
+
+/*
+ * Function netwave_ioctl (dev, rq, cmd)
+ *
+ * Perform ioctl : config & info stuff
+ * This is the stuff that are treated the wireless extensions (iwconfig)
+ *
+ */
+static int netwave_ioctl(struct net_device *dev, /* ioctl device */
+ struct ifreq *rq, /* Data passed */
+ int cmd) /* Ioctl number */
+{
+ int ret = 0;
+#ifdef WIRELESS_EXT
+#if WIRELESS_EXT <= 12
+ struct iwreq *wrq = (struct iwreq *) rq;
+#endif
+#endif
+
+ DEBUG(0, "%s: ->netwave_ioctl(cmd=0x%X)\n", dev->name, cmd);
+
+ /* Look what is the request */
+ switch(cmd) {
+ /* --------------- WIRELESS EXTENSIONS --------------- */
+#ifdef WIRELESS_EXT
+#if WIRELESS_EXT <= 12
+ case SIOCGIWNAME:
+ netwave_get_name(dev, NULL, &(wrq->u), NULL);
+ break;
+ case SIOCSIWNWID:
+ ret = netwave_set_nwid(dev, NULL, &(wrq->u), NULL);
+ break;
+ case SIOCGIWNWID:
+ ret = netwave_get_nwid(dev, NULL, &(wrq->u), NULL);
+ break;
+#if WIRELESS_EXT > 8 /* Note : The API did change... */
+ case SIOCGIWENCODE:
+ /* Get scramble key */
+ if(wrq->u.encoding.pointer != (caddr_t) 0)
+ {
+ char key[2];
+ ret = netwave_get_scramble(dev, NULL, &(wrq->u), key);
+ if(copy_to_user(wrq->u.encoding.pointer, key, 2))
+ ret = -EFAULT;
+ }
+ break;
+ case SIOCSIWENCODE:
+ /* Set scramble key */
+ if(wrq->u.encoding.pointer != (caddr_t) 0)
+ {
+ char key[2];
+ if(copy_from_user(key, wrq->u.encoding.pointer, 2))
+ {
+ ret = -EFAULT;
+ break;
+ }
+ ret = netwave_set_scramble(dev, NULL, &(wrq->u), key);
+ }
+ break;
+ case SIOCGIWMODE:
+ /* Mode of operation */
+ ret = netwave_get_mode(dev, NULL, &(wrq->u), NULL);
+ break;
+#else /* WIRELESS_EXT > 8 */
+ case SIOCGIWENCODE:
+ /* Get scramble key */
+ ret = netwave_get_scramble(dev, NULL, &(wrq->u),
+ (char *) &wrq->u.encoding.code);
+ break;
+ case SIOCSIWENCODE:
+ /* Set scramble key */
+ ret = netwave_set_scramble(dev, NULL, &(wrq->u),
+ (char *) &wrq->u.encoding.code);
+ break;
+#endif /* WIRELESS_EXT > 8 */
+ case SIOCGIWRANGE:
+ /* Basic checking... */
+ if(wrq->u.data.pointer != (caddr_t) 0) {
+ struct iw_range range;
+ ret = netwave_get_range(dev, NULL, &(wrq->u), (char *) &range);
+ if (copy_to_user(wrq->u.data.pointer, &range,
+ sizeof(struct iw_range)))
+ ret = -EFAULT;
+ }
+ break;
+ case SIOCGIWPRIV:
+ /* Basic checking... */
+ if(wrq->u.data.pointer != (caddr_t) 0) {
+ /* Set the number of ioctl available */
+ wrq->u.data.length = sizeof(netwave_private_args) / sizeof(netwave_private_args[0]);
+
+ /* Copy structure to the user buffer */
+ if(copy_to_user(wrq->u.data.pointer,
+ (u_char *) netwave_private_args,
+ sizeof(netwave_private_args)))
+ ret = -EFAULT;
+ }
+ break;
+ case SIOCGIPSNAP:
+ if(wrq->u.data.pointer != (caddr_t) 0) {
+ char buffer[sizeof( struct site_survey)];
+ ret = netwave_get_snap(dev, NULL, &(wrq->u), buffer);
+ /* Copy structure to the user buffer */
+ if(copy_to_user(wrq->u.data.pointer,
+ buffer,
+ sizeof( struct site_survey)))
+ {
+ printk(KERN_DEBUG "Bad buffer!\n");
+ break;
+ }
+ }
+ break;
+#endif /* WIRELESS_EXT <= 12 */
+#endif /* WIRELESS_EXT */
+ default:
+ ret = -EOPNOTSUPP;
+ }
+
+ return ret;
+}
+
+/*
+ * Function netwave_pcmcia_config (link)
+ *
+ * netwave_pcmcia_config() is scheduled to run after a CARD_INSERTION
+ * event is received, to configure the PCMCIA socket, and to make the
+ * device available to the system.
+ *
+ */
+
+#define CS_CHECK(fn, ret) \
+do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
+
+static void netwave_pcmcia_config(dev_link_t *link) {
+ client_handle_t handle = link->handle;
+ struct net_device *dev = link->priv;
+ netwave_private *priv = netdev_priv(dev);
+ tuple_t tuple;
+ cisparse_t parse;
+ int i, j, last_ret, last_fn;
+ u_char buf[64];
+ win_req_t req;
+ memreq_t mem;
+ u_char __iomem *ramBase = NULL;
+
+ DEBUG(0, "netwave_pcmcia_config(0x%p)\n", link);
+
+ /*
+ This reads the card's CONFIG tuple to find its configuration
+ registers.
+ */
+ tuple.Attributes = 0;
+ tuple.TupleData = (cisdata_t *) buf;
+ tuple.TupleDataMax = 64;
+ tuple.TupleOffset = 0;
+ tuple.DesiredTuple = CISTPL_CONFIG;
+ CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(handle, &tuple));
+ CS_CHECK(GetTupleData, pcmcia_get_tuple_data(handle, &tuple));
+ CS_CHECK(ParseTuple, pcmcia_parse_tuple(handle, &tuple, &parse));
+ link->conf.ConfigBase = parse.config.base;
+ link->conf.Present = parse.config.rmask[0];
+
+ /* Configure card */
+ link->state |= DEV_CONFIG;
+
+ /*
+ * Try allocating IO ports. This tries a few fixed addresses.
+ * If you want, you can also read the card's config table to
+ * pick addresses -- see the serial driver for an example.
+ */
+ for (i = j = 0x0; j < 0x400; j += 0x20) {
+ link->io.BasePort1 = j ^ 0x300;
+ i = pcmcia_request_io(link->handle, &link->io);
+ if (i == CS_SUCCESS) break;
+ }
+ if (i != CS_SUCCESS) {
+ cs_error(link->handle, RequestIO, i);
+ goto failed;
+ }
+
+ /*
+ * Now allocate an interrupt line. Note that this does not
+ * actually assign a handler to the interrupt.
+ */
+ CS_CHECK(RequestIRQ, pcmcia_request_irq(handle, &link->irq));
+
+ /*
+ * This actually configures the PCMCIA socket -- setting up
+ * the I/O windows and the interrupt mapping.
+ */
+ CS_CHECK(RequestConfiguration, pcmcia_request_configuration(handle, &link->conf));
+
+ /*
+ * Allocate a 32K memory window. Note that the dev_link_t
+ * structure provides space for one window handle -- if your
+ * device needs several windows, you'll need to keep track of
+ * the handles in your private data structure, dev->priv.
+ */
+ DEBUG(1, "Setting mem speed of %d\n", mem_speed);
+
+ req.Attributes = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_CM|WIN_ENABLE;
+ req.Base = 0; req.Size = 0x8000;
+ req.AccessSpeed = mem_speed;
+ CS_CHECK(RequestWindow, pcmcia_request_window(&link->handle, &req, &link->win));
+ mem.CardOffset = 0x20000; mem.Page = 0;
+ CS_CHECK(MapMemPage, pcmcia_map_mem_page(link->win, &mem));
+
+ /* Store base address of the common window frame */
+ ramBase = ioremap(req.Base, 0x8000);
+ priv->ramBase = ramBase;
+
+ dev->irq = link->irq.AssignedIRQ;
+ dev->base_addr = link->io.BasePort1;
+ SET_NETDEV_DEV(dev, &handle_to_dev(handle));
+
+ if (register_netdev(dev) != 0) {
+ printk(KERN_DEBUG "netwave_cs: register_netdev() failed\n");
+ goto failed;
+ }
+
+ strcpy(priv->node.dev_name, dev->name);
+ link->dev = &priv->node;
+ link->state &= ~DEV_CONFIG_PENDING;
+
+ /* Reset card before reading physical address */
+ netwave_doreset(dev->base_addr, ramBase);
+
+ /* Read the ethernet address and fill in the Netwave registers. */
+ for (i = 0; i < 6; i++)
+ dev->dev_addr[i] = readb(ramBase + NETWAVE_EREG_PA + i);
+
+ printk(KERN_INFO "%s: Netwave: port %#3lx, irq %d, mem %lx id "
+ "%c%c, hw_addr ", dev->name, dev->base_addr, dev->irq,
+ (u_long) ramBase, (int) readb(ramBase+NETWAVE_EREG_NI),
+ (int) readb(ramBase+NETWAVE_EREG_NI+1));
+ for (i = 0; i < 6; i++)
+ printk("%02X%s", dev->dev_addr[i], ((i<5) ? ":" : "\n"));
+
+ /* get revision words */
+ printk(KERN_DEBUG "Netwave_reset: revision %04x %04x\n",
+ get_uint16(ramBase + NETWAVE_EREG_ARW),
+ get_uint16(ramBase + NETWAVE_EREG_ARW+2));
+ return;
+
+cs_failed:
+ cs_error(link->handle, last_fn, last_ret);
+failed:
+ netwave_release(link);
+} /* netwave_pcmcia_config */
+
+/*
+ * Function netwave_release (arg)
+ *
+ * After a card is removed, netwave_release() will unregister the net
+ * device, and release the PCMCIA configuration. If the device is
+ * still open, this will be postponed until it is closed.
+ */
+static void netwave_release(dev_link_t *link)
+{
+ struct net_device *dev = link->priv;
+ netwave_private *priv = netdev_priv(dev);
+
+ DEBUG(0, "netwave_release(0x%p)\n", link);
+
+ /* Don't bother checking to see if these succeed or not */
+ if (link->win) {
+ iounmap(priv->ramBase);
+ pcmcia_release_window(link->win);
+ }
+ pcmcia_release_configuration(link->handle);
+ pcmcia_release_io(link->handle, &link->io);
+ pcmcia_release_irq(link->handle, &link->irq);
+
+ link->state &= ~DEV_CONFIG;
+}
+
+/*
+ * Function netwave_event (event, priority, args)
+ *
+ * The card status event handler. Mostly, this schedules other
+ * stuff to run after an event is received. A CARD_REMOVAL event
+ * also sets some flags to discourage the net drivers from trying
+ * to talk to the card any more.
+ *
+ * When a CARD_REMOVAL event is received, we immediately set a flag
+ * to block future accesses to this device. All the functions that
+ * actually access the device should check this flag to make sure
+ * the card is still present.
+ *
+ */
+static int netwave_event(event_t event, int priority,
+ event_callback_args_t *args)
+{
+ dev_link_t *link = args->client_data;
+ struct net_device *dev = link->priv;
+
+ DEBUG(1, "netwave_event(0x%06x)\n", event);
+
+ switch (event) {
+ case CS_EVENT_REGISTRATION_COMPLETE:
+ DEBUG(0, "netwave_cs: registration complete\n");
+ break;
+
+ case CS_EVENT_CARD_REMOVAL:
+ link->state &= ~DEV_PRESENT;
+ if (link->state & DEV_CONFIG) {
+ netif_device_detach(dev);
+ netwave_release(link);
+ }
+ break;
+ case CS_EVENT_CARD_INSERTION:
+ link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
+ netwave_pcmcia_config( link);
+ break;
+ case CS_EVENT_PM_SUSPEND:
+ link->state |= DEV_SUSPEND;
+ /* Fall through... */
+ case CS_EVENT_RESET_PHYSICAL:
+ if (link->state & DEV_CONFIG) {
+ if (link->open)
+ netif_device_detach(dev);
+ pcmcia_release_configuration(link->handle);
+ }
+ break;
+ case CS_EVENT_PM_RESUME:
+ link->state &= ~DEV_SUSPEND;
+ /* Fall through... */
+ case CS_EVENT_CARD_RESET:
+ if (link->state & DEV_CONFIG) {
+ pcmcia_request_configuration(link->handle, &link->conf);
+ if (link->open) {
+ netwave_reset(dev);
+ netif_device_attach(dev);
+ }
+ }
+ break;
+ }
+ return 0;
+} /* netwave_event */
+
+/*
+ * Function netwave_doreset (ioBase, ramBase)
+ *
+ * Proper hardware reset of the card.
+ */
+static void netwave_doreset(kio_addr_t ioBase, u_char __iomem *ramBase)
+{
+ /* Reset card */
+ wait_WOC(ioBase);
+ outb(0x80, ioBase + NETWAVE_REG_PMR);
+ writeb(0x08, ramBase + NETWAVE_EREG_ASCC); /* Bit 3 is WOC */
+ outb(0x0, ioBase + NETWAVE_REG_PMR); /* release reset */
+}
+
+/*
+ * Function netwave_reset (dev)
+ *
+ * Reset and restore all of the netwave registers
+ */
+static void netwave_reset(struct net_device *dev) {
+ /* u_char state; */
+ netwave_private *priv = netdev_priv(dev);
+ u_char __iomem *ramBase = priv->ramBase;
+ kio_addr_t iobase = dev->base_addr;
+
+ DEBUG(0, "netwave_reset: Done with hardware reset\n");
+
+ priv->timeoutCounter = 0;
+
+ /* Reset card */
+ netwave_doreset(iobase, ramBase);
+ printk(KERN_DEBUG "netwave_reset: Done with hardware reset\n");
+
+ /* Write a NOP to check the card */
+ wait_WOC(iobase);
+ writeb(NETWAVE_CMD_NOP, ramBase + NETWAVE_EREG_CB + 0);
+ writeb(NETWAVE_CMD_EOC, ramBase + NETWAVE_EREG_CB + 1);
+
+ /* Set receive conf */
+ wait_WOC(iobase);
+ writeb(NETWAVE_CMD_SRC, ramBase + NETWAVE_EREG_CB + 0);
+ writeb(rxConfRxEna + rxConfBcast, ramBase + NETWAVE_EREG_CB + 1);
+ writeb(NETWAVE_CMD_EOC, ramBase + NETWAVE_EREG_CB + 2);
+
+ /* Set transmit conf */
+ wait_WOC(iobase);
+ writeb(NETWAVE_CMD_STC, ramBase + NETWAVE_EREG_CB + 0);
+ writeb(txConfTxEna, ramBase + NETWAVE_EREG_CB + 1);
+ writeb(NETWAVE_CMD_EOC, ramBase + NETWAVE_EREG_CB + 2);
+
+ /* Now set the MU Domain */
+ printk(KERN_DEBUG "Setting domain to 0x%x%02x\n", (domain >> 8) & 0x01, domain & 0xff);
+ wait_WOC(iobase);
+ writeb(NETWAVE_CMD_SMD, ramBase + NETWAVE_EREG_CB + 0);
+ writeb(domain & 0xff, ramBase + NETWAVE_EREG_CB + 1);
+ writeb((domain>>8) & 0x01, ramBase + NETWAVE_EREG_CB + 2);
+ writeb(NETWAVE_CMD_EOC, ramBase + NETWAVE_EREG_CB + 3);
+
+ /* Set scramble key */
+ printk(KERN_DEBUG "Setting scramble key to 0x%x\n", scramble_key);
+ wait_WOC(iobase);
+ writeb(NETWAVE_CMD_SSK, ramBase + NETWAVE_EREG_CB + 0);
+ writeb(scramble_key & 0xff, ramBase + NETWAVE_EREG_CB + 1);
+ writeb((scramble_key>>8) & 0xff, ramBase + NETWAVE_EREG_CB + 2);
+ writeb(NETWAVE_CMD_EOC, ramBase + NETWAVE_EREG_CB + 3);
+
+ /* Enable interrupts, bit 4 high to keep unused
+ * source from interrupting us, bit 2 high to
+ * set interrupt enable, 567 to enable TxDN,
+ * RxErr and RxRdy
+ */
+ wait_WOC(iobase);
+ outb(imrConfIENA+imrConfRFU1, iobase + NETWAVE_REG_IMR);
+
+ /* Hent 4 bytes fra 0x170. Skal vaere 0a,29,88,36
+ * waitWOC
+ * skriv 80 til d000:3688
+ * sjekk om det ble 80
+ */
+
+ /* Enable Receiver */
+ wait_WOC(iobase);
+ writeb(NETWAVE_CMD_ER, ramBase + NETWAVE_EREG_CB + 0);
+ writeb(NETWAVE_CMD_EOC, ramBase + NETWAVE_EREG_CB + 1);
+
+ /* Set the IENA bit in COR */
+ wait_WOC(iobase);
+ outb(corConfIENA + corConfLVLREQ, iobase + NETWAVE_REG_COR);
+}
+
+/*
+ * Function netwave_hw_xmit (data, len, dev)
+ */
+static int netwave_hw_xmit(unsigned char* data, int len,
+ struct net_device* dev) {
+ unsigned long flags;
+ unsigned int TxFreeList,
+ curBuff,
+ MaxData,
+ DataOffset;
+ int tmpcount;
+
+ netwave_private *priv = netdev_priv(dev);
+ u_char __iomem * ramBase = priv->ramBase;
+ kio_addr_t iobase = dev->base_addr;
+
+ /* Disable interrupts & save flags */
+ spin_lock_irqsave(&priv->spinlock, flags);
+
+ /* Check if there are transmit buffers available */
+ wait_WOC(iobase);
+ if ((inb(iobase+NETWAVE_REG_ASR) & NETWAVE_ASR_TXBA) == 0) {
+ /* No buffers available */
+ printk(KERN_DEBUG "netwave_hw_xmit: %s - no xmit buffers available.\n",
+ dev->name);
+ spin_unlock_irqrestore(&priv->spinlock, flags);
+ return 1;
+ }
+
+ priv->stats.tx_bytes += len;
+
+ DEBUG(3, "Transmitting with SPCQ %x SPU %x LIF %x ISPLQ %x\n",
+ readb(ramBase + NETWAVE_EREG_SPCQ),
+ readb(ramBase + NETWAVE_EREG_SPU),
+ readb(ramBase + NETWAVE_EREG_LIF),
+ readb(ramBase + NETWAVE_EREG_ISPLQ));
+
+ /* Now try to insert it into the adapters free memory */
+ wait_WOC(iobase);
+ TxFreeList = get_uint16(ramBase + NETWAVE_EREG_TDP);
+ MaxData = get_uint16(ramBase + NETWAVE_EREG_TDP+2);
+ DataOffset = get_uint16(ramBase + NETWAVE_EREG_TDP+4);
+
+ DEBUG(3, "TxFreeList %x, MaxData %x, DataOffset %x\n",
+ TxFreeList, MaxData, DataOffset);
+
+ /* Copy packet to the adapter fragment buffers */
+ curBuff = TxFreeList;
+ tmpcount = 0;
+ while (tmpcount < len) {
+ int tmplen = len - tmpcount;
+ copy_to_pc(ramBase + curBuff + DataOffset, data + tmpcount,
+ (tmplen < MaxData) ? tmplen : MaxData);
+ tmpcount += MaxData;
+
+ /* Advance to next buffer */
+ curBuff = get_uint16(ramBase + curBuff);
+ }
+
+ /* Now issue transmit list */
+ wait_WOC(iobase);
+ writeb(NETWAVE_CMD_TL, ramBase + NETWAVE_EREG_CB + 0);
+ writeb(len & 0xff, ramBase + NETWAVE_EREG_CB + 1);
+ writeb((len>>8) & 0xff, ramBase + NETWAVE_EREG_CB + 2);
+ writeb(NETWAVE_CMD_EOC, ramBase + NETWAVE_EREG_CB + 3);
+
+ spin_unlock_irqrestore(&priv->spinlock, flags);
+ return 0;
+}
+
+static int netwave_start_xmit(struct sk_buff *skb, struct net_device *dev) {
+ /* This flag indicate that the hardware can't perform a transmission.
+ * Theoritically, NET3 check it before sending a packet to the driver,
+ * but in fact it never do that and pool continuously.
+ * As the watchdog will abort too long transmissions, we are quite safe...
+ */
+
+ netif_stop_queue(dev);
+
+ {
+ short length = ETH_ZLEN < skb->len ? skb->len : ETH_ZLEN;
+ unsigned char* buf = skb->data;
+
+ if (netwave_hw_xmit( buf, length, dev) == 1) {
+ /* Some error, let's make them call us another time? */
+ netif_start_queue(dev);
+ }
+ dev->trans_start = jiffies;
+ }
+ dev_kfree_skb(skb);
+
+ return 0;
+} /* netwave_start_xmit */
+
+/*
+ * Function netwave_interrupt (irq, dev_id, regs)
+ *
+ * This function is the interrupt handler for the Netwave card. This
+ * routine will be called whenever:
+ * 1. A packet is received.
+ * 2. A packet has successfully been transferred and the unit is
+ * ready to transmit another packet.
+ * 3. A command has completed execution.
+ */
+static irqreturn_t netwave_interrupt(int irq, void* dev_id, struct pt_regs *regs)
+{
+ kio_addr_t iobase;
+ u_char __iomem *ramBase;
+ struct net_device *dev = (struct net_device *)dev_id;
+ struct netwave_private *priv = netdev_priv(dev);
+ dev_link_t *link = &priv->link;
+ int i;
+
+ if (!netif_device_present(dev))
+ return IRQ_NONE;
+
+ iobase = dev->base_addr;
+ ramBase = priv->ramBase;
+
+ /* Now find what caused the interrupt, check while interrupts ready */
+ for (i = 0; i < 10; i++) {
+ u_char status;
+
+ wait_WOC(iobase);
+ if (!(inb(iobase+NETWAVE_REG_CCSR) & 0x02))
+ break; /* None of the interrupt sources asserted (normal exit) */
+
+ status = inb(iobase + NETWAVE_REG_ASR);
+
+ if (!DEV_OK(link)) {
+ DEBUG(1, "netwave_interrupt: Interrupt with status 0x%x "
+ "from removed or suspended card!\n", status);
+ break;
+ }
+
+ /* RxRdy */
+ if (status & 0x80) {
+ netwave_rx(dev);
+ /* wait_WOC(iobase); */
+ /* RxRdy cannot be reset directly by the host */
+ }
+ /* RxErr */
+ if (status & 0x40) {
+ u_char rser;
+
+ rser = readb(ramBase + NETWAVE_EREG_RSER);
+
+ if (rser & 0x04) {
+ ++priv->stats.rx_dropped;
+ ++priv->stats.rx_crc_errors;
+ }
+ if (rser & 0x02)
+ ++priv->stats.rx_frame_errors;
+
+ /* Clear the RxErr bit in RSER. RSER+4 is the
+ * write part. Also clear the RxCRC (0x04) and
+ * RxBig (0x02) bits if present */
+ wait_WOC(iobase);
+ writeb(0x40 | (rser & 0x06), ramBase + NETWAVE_EREG_RSER + 4);
+
+ /* Write bit 6 high to ASCC to clear RxErr in ASR,
+ * WOC must be set first!
+ */
+ wait_WOC(iobase);
+ writeb(0x40, ramBase + NETWAVE_EREG_ASCC);
+
+ /* Remember to count up priv->stats on error packets */
+ ++priv->stats.rx_errors;
+ }
+ /* TxDN */
+ if (status & 0x20) {
+ int txStatus;
+
+ txStatus = readb(ramBase + NETWAVE_EREG_TSER);
+ DEBUG(3, "Transmit done. TSER = %x id %x\n",
+ txStatus, readb(ramBase + NETWAVE_EREG_TSER + 1));
+
+ if (txStatus & 0x20) {
+ /* Transmitting was okay, clear bits */
+ wait_WOC(iobase);
+ writeb(0x2f, ramBase + NETWAVE_EREG_TSER + 4);
+ ++priv->stats.tx_packets;
+ }
+
+ if (txStatus & 0xd0) {
+ if (txStatus & 0x80) {
+ ++priv->stats.collisions; /* Because of /proc/net/dev*/
+ /* ++priv->stats.tx_aborted_errors; */
+ /* printk("Collision. %ld\n", jiffies - dev->trans_start); */
+ }
+ if (txStatus & 0x40)
+ ++priv->stats.tx_carrier_errors;
+ /* 0x80 TxGU Transmit giveup - nine times and no luck
+ * 0x40 TxNOAP No access point. Discarded packet.
+ * 0x10 TxErr Transmit error. Always set when
+ * TxGU and TxNOAP is set. (Those are the only ones
+ * to set TxErr).
+ */
+ DEBUG(3, "netwave_interrupt: TxDN with error status %x\n",
+ txStatus);
+
+ /* Clear out TxGU, TxNOAP, TxErr and TxTrys */
+ wait_WOC(iobase);
+ writeb(0xdf & txStatus, ramBase+NETWAVE_EREG_TSER+4);
+ ++priv->stats.tx_errors;
+ }
+ DEBUG(3, "New status is TSER %x ASR %x\n",
+ readb(ramBase + NETWAVE_EREG_TSER),
+ inb(iobase + NETWAVE_REG_ASR));
+
+ netif_wake_queue(dev);
+ }
+ /* TxBA, this would trigger on all error packets received */
+ /* if (status & 0x01) {
+ DEBUG(4, "Transmit buffers available, %x\n", status);
+ }
+ */
+ }
+ /* Handled if we looped at least one time - Jean II */
+ return IRQ_RETVAL(i);
+} /* netwave_interrupt */
+
+/*
+ * Function netwave_watchdog (a)
+ *
+ * Watchdog : when we start a transmission, we set a timer in the
+ * kernel. If the transmission complete, this timer is disabled. If
+ * it expire, we reset the card.
+ *
+ */
+static void netwave_watchdog(struct net_device *dev) {
+
+ DEBUG(1, "%s: netwave_watchdog: watchdog timer expired\n", dev->name);
+ netwave_reset(dev);
+ dev->trans_start = jiffies;
+ netif_wake_queue(dev);
+} /* netwave_watchdog */
+
+static struct net_device_stats *netwave_get_stats(struct net_device *dev) {
+ netwave_private *priv = netdev_priv(dev);
+
+ update_stats(dev);
+
+ DEBUG(2, "netwave: SPCQ %x SPU %x LIF %x ISPLQ %x MHS %x rxtx %x"
+ " %x tx %x %x %x %x\n",
+ readb(priv->ramBase + NETWAVE_EREG_SPCQ),
+ readb(priv->ramBase + NETWAVE_EREG_SPU),
+ readb(priv->ramBase + NETWAVE_EREG_LIF),
+ readb(priv->ramBase + NETWAVE_EREG_ISPLQ),
+ readb(priv->ramBase + NETWAVE_EREG_MHS),
+ readb(priv->ramBase + NETWAVE_EREG_EC + 0xe),
+ readb(priv->ramBase + NETWAVE_EREG_EC + 0xf),
+ readb(priv->ramBase + NETWAVE_EREG_EC + 0x18),
+ readb(priv->ramBase + NETWAVE_EREG_EC + 0x19),
+ readb(priv->ramBase + NETWAVE_EREG_EC + 0x1a),
+ readb(priv->ramBase + NETWAVE_EREG_EC + 0x1b));
+
+ return &priv->stats;
+}
+
+static void update_stats(struct net_device *dev) {
+ //unsigned long flags;
+/* netwave_private *priv = netdev_priv(dev); */
+
+ //spin_lock_irqsave(&priv->spinlock, flags);
+
+/* priv->stats.rx_packets = readb(priv->ramBase + 0x18e);
+ priv->stats.tx_packets = readb(priv->ramBase + 0x18f); */
+
+ //spin_unlock_irqrestore(&priv->spinlock, flags);
+}
+
+static int netwave_rx(struct net_device *dev)
+{
+ netwave_private *priv = netdev_priv(dev);
+ u_char __iomem *ramBase = priv->ramBase;
+ kio_addr_t iobase = dev->base_addr;
+ u_char rxStatus;
+ struct sk_buff *skb = NULL;
+ unsigned int curBuffer,
+ rcvList;
+ int rcvLen;
+ int tmpcount = 0;
+ int dataCount, dataOffset;
+ int i;
+ u_char *ptr;
+
+ DEBUG(3, "xinw_rx: Receiving ... \n");
+
+ /* Receive max 10 packets for now. */
+ for (i = 0; i < 10; i++) {
+ /* Any packets? */
+ wait_WOC(iobase);
+ rxStatus = readb(ramBase + NETWAVE_EREG_RSER);
+ if ( !( rxStatus & 0x80)) /* No more packets */
+ break;
+
+ /* Check if multicast/broadcast or other */
+ /* multicast = (rxStatus & 0x20); */
+
+ /* The receive list pointer and length of the packet */
+ wait_WOC(iobase);
+ rcvLen = get_int16( ramBase + NETWAVE_EREG_RDP);
+ rcvList = get_uint16( ramBase + NETWAVE_EREG_RDP + 2);
+
+ if (rcvLen < 0) {
+ printk(KERN_DEBUG "netwave_rx: Receive packet with len %d\n",
+ rcvLen);
+ return 0;
+ }
+
+ skb = dev_alloc_skb(rcvLen+5);
+ if (skb == NULL) {
+ DEBUG(1, "netwave_rx: Could not allocate an sk_buff of "
+ "length %d\n", rcvLen);
+ ++priv->stats.rx_dropped;
+ /* Tell the adapter to skip the packet */
+ wait_WOC(iobase);
+ writeb(NETWAVE_CMD_SRP, ramBase + NETWAVE_EREG_CB + 0);
+ writeb(NETWAVE_CMD_EOC, ramBase + NETWAVE_EREG_CB + 1);
+ return 0;
+ }
+
+ skb_reserve( skb, 2); /* Align IP on 16 byte */
+ skb_put( skb, rcvLen);
+ skb->dev = dev;
+
+ /* Copy packet fragments to the skb data area */
+ ptr = (u_char*) skb->data;
+ curBuffer = rcvList;
+ tmpcount = 0;
+ while ( tmpcount < rcvLen) {
+ /* Get length and offset of current buffer */
+ dataCount = get_uint16( ramBase+curBuffer+2);
+ dataOffset = get_uint16( ramBase+curBuffer+4);
+
+ copy_from_pc( ptr + tmpcount,
+ ramBase+curBuffer+dataOffset, dataCount);
+
+ tmpcount += dataCount;
+
+ /* Point to next buffer */
+ curBuffer = get_uint16(ramBase + curBuffer);
+ }
+
+ skb->protocol = eth_type_trans(skb,dev);
+ /* Queue packet for network layer */
+ netif_rx(skb);
+
+ dev->last_rx = jiffies;
+ priv->stats.rx_packets++;
+ priv->stats.rx_bytes += rcvLen;
+
+ /* Got the packet, tell the adapter to skip it */
+ wait_WOC(iobase);
+ writeb(NETWAVE_CMD_SRP, ramBase + NETWAVE_EREG_CB + 0);
+ writeb(NETWAVE_CMD_EOC, ramBase + NETWAVE_EREG_CB + 1);
+ DEBUG(3, "Packet reception ok\n");
+ }
+ return 0;
+}
+
+static int netwave_open(struct net_device *dev) {
+ netwave_private *priv = netdev_priv(dev);
+ dev_link_t *link = &priv->link;
+
+ DEBUG(1, "netwave_open: starting.\n");
+
+ if (!DEV_OK(link))
+ return -ENODEV;
+
+ link->open++;
+
+ netif_start_queue(dev);
+ netwave_reset(dev);
+
+ return 0;
+}
+
+static int netwave_close(struct net_device *dev) {
+ netwave_private *priv = netdev_priv(dev);
+ dev_link_t *link = &priv->link;
+
+ DEBUG(1, "netwave_close: finishing.\n");
+
+ link->open--;
+ netif_stop_queue(dev);
+
+ return 0;
+}
+
+static struct pcmcia_driver netwave_driver = {
+ .owner = THIS_MODULE,
+ .drv = {
+ .name = "netwave_cs",
+ },
+ .attach = netwave_attach,
+ .detach = netwave_detach,
+};
+
+static int __init init_netwave_cs(void)
+{
+ return pcmcia_register_driver(&netwave_driver);
+}
+
+static void __exit exit_netwave_cs(void)
+{
+ pcmcia_unregister_driver(&netwave_driver);
+ BUG_ON(dev_list != NULL);
+}
+
+module_init(init_netwave_cs);
+module_exit(exit_netwave_cs);
+
+/* Set or clear the multicast filter for this adaptor.
+ num_addrs == -1 Promiscuous mode, receive all packets
+ num_addrs == 0 Normal mode, clear multicast list
+ num_addrs > 0 Multicast mode, receive normal and MC packets, and do
+ best-effort filtering.
+ */
+static void set_multicast_list(struct net_device *dev)
+{
+ kio_addr_t iobase = dev->base_addr;
+ netwave_private *priv = netdev_priv(dev);
+ u_char __iomem * ramBase = priv->ramBase;
+ u_char rcvMode = 0;
+
+#ifdef PCMCIA_DEBUG
+ if (pc_debug > 2) {
+ static int old;
+ if (old != dev->mc_count) {
+ old = dev->mc_count;
+ DEBUG(0, "%s: setting Rx mode to %d addresses.\n",
+ dev->name, dev->mc_count);
+ }
+ }
+#endif
+
+ if (dev->mc_count || (dev->flags & IFF_ALLMULTI)) {
+ /* Multicast Mode */
+ rcvMode = rxConfRxEna + rxConfAMP + rxConfBcast;
+ } else if (dev->flags & IFF_PROMISC) {
+ /* Promiscous mode */
+ rcvMode = rxConfRxEna + rxConfPro + rxConfAMP + rxConfBcast;
+ } else {
+ /* Normal mode */
+ rcvMode = rxConfRxEna + rxConfBcast;
+ }
+
+ /* printk("netwave set_multicast_list: rcvMode to %x\n", rcvMode);*/
+ /* Now set receive mode */
+ wait_WOC(iobase);
+ writeb(NETWAVE_CMD_SRC, ramBase + NETWAVE_EREG_CB + 0);
+ writeb(rcvMode, ramBase + NETWAVE_EREG_CB + 1);
+ writeb(NETWAVE_CMD_EOC, ramBase + NETWAVE_EREG_CB + 2);
+}
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/wireless/orinoco.c b/drivers/net/wireless/orinoco.c
new file mode 100644
index 0000000..a3a3243
--- /dev/null
+++ b/drivers/net/wireless/orinoco.c
@@ -0,0 +1,4243 @@
+/* orinoco.c - (formerly known as dldwd_cs.c and orinoco_cs.c)
+ *
+ * A driver for Hermes or Prism 2 chipset based PCMCIA wireless
+ * adaptors, with Lucent/Agere, Intersil or Symbol firmware.
+ *
+ * Current maintainers (as of 29 September 2003) are:
+ * Pavel Roskin <proski AT gnu.org>
+ * and David Gibson <hermes AT gibson.dropbear.id.au>
+ *
+ * (C) Copyright David Gibson, IBM Corporation 2001-2003.
+ * Copyright (C) 2000 David Gibson, Linuxcare Australia.
+ * With some help from :
+ * Copyright (C) 2001 Jean Tourrilhes, HP Labs
+ * Copyright (C) 2001 Benjamin Herrenschmidt
+ *
+ * Based on dummy_cs.c 1.27 2000/06/12 21:27:25
+ *
+ * Portions based on wvlan_cs.c 1.0.6, Copyright Andreas Neuhaus <andy
+ * AT fasta.fh-dortmund.de>
+ * http://www.stud.fh-dortmund.de/~andy/wvlan/
+ *
+ * The contents of this file are subject to the Mozilla Public License
+ * Version 1.1 (the "License"); you may not use this file except in
+ * compliance with the License. You may obtain a copy of the License
+ * at http://www.mozilla.org/MPL/
+ *
+ * Software distributed under the License is distributed on an "AS IS"
+ * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
+ * the License for the specific language governing rights and
+ * limitations under the License.
+ *
+ * The initial developer of the original code is David A. Hinds
+ * <dahinds AT users.sourceforge.net>. Portions created by David
+ * A. Hinds are Copyright (C) 1999 David A. Hinds. All Rights
+ * Reserved.
+ *
+ * Alternatively, the contents of this file may be used under the
+ * terms of the GNU General Public License version 2 (the "GPL"), in
+ * which case the provisions of the GPL are applicable instead of the
+ * above. If you wish to allow the use of your version of this file
+ * only under the terms of the GPL and not to allow others to use your
+ * version of this file under the MPL, indicate your decision by
+ * deleting the provisions above and replace them with the notice and
+ * other provisions required by the GPL. If you do not delete the
+ * provisions above, a recipient may use your version of this file
+ * under either the MPL or the GPL. */
+
+/*
+ * v0.01 -> v0.02 - 21/3/2001 - Jean II
+ * o Allow to use regular ethX device name instead of dldwdX
+ * o Warning on IBSS with ESSID=any for firmware 6.06
+ * o Put proper range.throughput values (optimistic)
+ * o IWSPY support (IOCTL and stat gather in Rx path)
+ * o Allow setting frequency in Ad-Hoc mode
+ * o Disable WEP setting if !has_wep to work on old firmware
+ * o Fix txpower range
+ * o Start adding support for Samsung/Compaq firmware
+ *
+ * v0.02 -> v0.03 - 23/3/2001 - Jean II
+ * o Start adding Symbol support - need to check all that
+ * o Fix Prism2/Symbol WEP to accept 128 bits keys
+ * o Add Symbol WEP (add authentication type)
+ * o Add Prism2/Symbol rate
+ * o Add PM timeout (holdover duration)
+ * o Enable "iwconfig eth0 key off" and friends (toggle flags)
+ * o Enable "iwconfig eth0 power unicast/all" (toggle flags)
+ * o Try with an Intel card. It report firmware 1.01, behave like
+ * an antiquated firmware, however on windows it says 2.00. Yuck !
+ * o Workaround firmware bug in allocate buffer (Intel 1.01)
+ * o Finish external renaming to orinoco...
+ * o Testing with various Wavelan firmwares
+ *
+ * v0.03 -> v0.04 - 30/3/2001 - Jean II
+ * o Update to Wireless 11 -> add retry limit/lifetime support
+ * o Tested with a D-Link DWL 650 card, fill in firmware support
+ * o Warning on Vcc mismatch (D-Link 3.3v card in Lucent 5v only slot)
+ * o Fixed the Prism2 WEP bugs that I introduced in v0.03 :-(
+ * It works on D-Link *only* after a tcpdump. Weird...
+ * And still doesn't work on Intel card. Grrrr...
+ * o Update the mode after a setport3
+ * o Add preamble setting for Symbol cards (not yet enabled)
+ * o Don't complain as much about Symbol cards...
+ *
+ * v0.04 -> v0.04b - 22/4/2001 - David Gibson
+ * o Removed the 'eth' parameter - always use ethXX as the
+ * interface name instead of dldwdXX. The other was racy
+ * anyway.
+ * o Clean up RID definitions in hermes.h, other cleanups
+ *
+ * v0.04b -> v0.04c - 24/4/2001 - Jean II
+ * o Tim Hurley <timster AT seiki.bliztech.com> reported a D-Link card
+ * with vendor 02 and firmware 0.08. Added in the capabilities...
+ * o Tested Lucent firmware 7.28, everything works...
+ *
+ * v0.04c -> v0.05 - 3/5/2001 - Benjamin Herrenschmidt
+ * o Spin-off Pcmcia code. This file is renamed orinoco.c,
+ * and orinoco_cs.c now contains only the Pcmcia specific stuff
+ * o Add Airport driver support on top of orinoco.c (see airport.c)
+ *
+ * v0.05 -> v0.05a - 4/5/2001 - Jean II
+ * o Revert to old Pcmcia code to fix breakage of Ben's changes...
+ *
+ * v0.05a -> v0.05b - 4/5/2001 - Jean II
+ * o add module parameter 'ignore_cis_vcc' for D-Link @ 5V
+ * o D-Link firmware doesn't support multicast. We just print a few
+ * error messages, but otherwise everything works...
+ * o For David : set/getport3 works fine, just upgrade iwpriv...
+ *
+ * v0.05b -> v0.05c - 5/5/2001 - Benjamin Herrenschmidt
+ * o Adapt airport.c to latest changes in orinoco.c
+ * o Remove deferred power enabling code
+ *
+ * v0.05c -> v0.05d - 5/5/2001 - Jean II
+ * o Workaround to SNAP decapsulate frame from Linksys AP
+ * original patch from : Dong Liu <dliu AT research.bell-labs.com>
+ * (note : the memcmp bug was mine - fixed)
+ * o Remove set_retry stuff, no firmware support it (bloat--).
+ *
+ * v0.05d -> v0.06 - 25/5/2001 - Jean II
+ * Original patch from "Hong Lin" <alin AT redhat.com>,
+ * "Ian Kinner" <ikinner AT redhat.com>
+ * and "David Smith" <dsmith AT redhat.com>
+ * o Init of priv->tx_rate_ctrl in firmware specific section.
+ * o Prism2/Symbol rate, upto should be 0xF and not 0x15. Doh !
+ * o Spectrum card always need cor_reset (for every reset)
+ * o Fix cor_reset to not lose bit 7 in the register
+ * o flush_stale_links to remove zombie Pcmcia instances
+ * o Ack previous hermes event before reset
+ * Me (with my little hands)
+ * o Allow orinoco.c to call cor_reset via priv->card_reset_handler
+ * o Add priv->need_card_reset to toggle this feature
+ * o Fix various buglets when setting WEP in Symbol firmware
+ * Now, encryption is fully functional on Symbol cards. Youpi !
+ *
+ * v0.06 -> v0.06b - 25/5/2001 - Jean II
+ * o IBSS on Symbol use port_mode = 4. Please don't ask...
+ *
+ * v0.06b -> v0.06c - 29/5/2001 - Jean II
+ * o Show first spy address in /proc/net/wireless for IBSS mode as well
+ *
+ * v0.06c -> v0.06d - 6/7/2001 - David Gibson
+ * o Change a bunch of KERN_INFO messages to KERN_DEBUG, as per Linus'
+ * wishes to reduce the number of unnecessary messages.
+ * o Removed bogus message on CRC error.
+ * o Merged fixes for v0.08 Prism 2 firmware from William Waghorn
+ * <willwaghorn AT yahoo.co.uk>
+ * o Slight cleanup/re-arrangement of firmware detection code.
+ *
+ * v0.06d -> v0.06e - 1/8/2001 - David Gibson
+ * o Removed some redundant global initializers (orinoco_cs.c).
+ * o Added some module metadata
+ *
+ * v0.06e -> v0.06f - 14/8/2001 - David Gibson
+ * o Wording fix to license
+ * o Added a 'use_alternate_encaps' module parameter for APs which need an
+ * oui of 00:00:00. We really need a better way of handling this, but
+ * the module flag is better than nothing for now.
+ *
+ * v0.06f -> v0.07 - 20/8/2001 - David Gibson
+ * o Removed BAP error retries from hermes_bap_seek(). For Tx we now
+ * let the upper layers handle the retry, we retry explicitly in the
+ * Rx path, but don't make as much noise about it.
+ * o Firmware detection cleanups.
+ *
+ * v0.07 -> v0.07a - 1/10/3001 - Jean II
+ * o Add code to read Symbol firmware revision, inspired by latest code
+ * in Spectrum24 by Lee John Keyser-Allen - Thanks Lee !
+ * o Thanks to Jared Valentine <hidden AT xmission.com> for "providing" me
+ * a 3Com card with a recent firmware, fill out Symbol firmware
+ * capabilities of latest rev (2.20), as well as older Symbol cards.
+ * o Disable Power Management in newer Symbol firmware, the API
+ * has changed (documentation needed).
+ *
+ * v0.07a -> v0.08 - 3/10/2001 - David Gibson
+ * o Fixed a possible buffer overrun found by the Stanford checker (in
+ * dldwd_ioctl_setiwencode()). Can only be called by root anyway, so not
+ * a big problem.
+ * o Turned has_big_wep on for Intersil cards. That's not true for all of
+ * them but we should at least let the capable ones try.
+ * o Wait for BUSY to clear at the beginning of hermes_bap_seek(). I
+ * realized that my assumption that the driver's serialization
+ * would prevent the BAP being busy on entry was possibly false, because
+ * things other than seeks may make the BAP busy.
+ * o Use "alternate" (oui 00:00:00) encapsulation by default.
+ * Setting use_old_encaps will mimic the old behaviour, but I think we
+ * will be able to eliminate this.
+ * o Don't try to make __initdata const (the version string). This can't
+ * work because of the way the __initdata sectioning works.
+ * o Added MODULE_LICENSE tags.
+ * o Support for PLX (transparent PCMCIA->PCI bridge) cards.
+ * o Changed to using the new type-fascist min/max.
+ *
+ * v0.08 -> v0.08a - 9/10/2001 - David Gibson
+ * o Inserted some missing acknowledgements/info into the Changelog.
+ * o Fixed some bugs in the normalization of signal level reporting.
+ * o Fixed bad bug in WEP key handling on Intersil and Symbol firmware,
+ * which led to an instant crash on big-endian machines.
+ *
+ * v0.08a -> v0.08b - 20/11/2001 - David Gibson
+ * o Lots of cleanup and bugfixes in orinoco_plx.c
+ * o Cleanup to handling of Tx rate setting.
+ * o Removed support for old encapsulation method.
+ * o Removed old "dldwd" names.
+ * o Split RID constants into a new file hermes_rid.h
+ * o Renamed RID constants to match linux-wlan-ng and prism2.o
+ * o Bugfixes in hermes.c
+ * o Poke the PLX's INTCSR register, so it actually starts
+ * generating interrupts. These cards might actually work now.
+ * o Update to wireless extensions v12 (Jean II)
+ * o Support for tallies and inquire command (Jean II)
+ * o Airport updates for newer PPC kernels (BenH)
+ *
+ * v0.08b -> v0.09 - 21/12/2001 - David Gibson
+ * o Some new PCI IDs for PLX cards.
+ * o Removed broken attempt to do ALLMULTI reception. Just use
+ * promiscuous mode instead
+ * o Preliminary work for list-AP (Jean II)
+ * o Airport updates from (BenH)
+ * o Eliminated racy hw_ready stuff
+ * o Fixed generation of fake events in irq handler. This should
+ * finally kill the EIO problems (Jean II & dgibson)
+ * o Fixed breakage of bitrate set/get on Agere firmware (Jean II)
+ *
+ * v0.09 -> v0.09a - 2/1/2002 - David Gibson
+ * o Fixed stupid mistake in multicast list handling, triggering
+ * a BUG()
+ *
+ * v0.09a -> v0.09b - 16/1/2002 - David Gibson
+ * o Fixed even stupider mistake in new interrupt handling, which
+ * seriously broke things on big-endian machines.
+ * o Removed a bunch of redundant includes and exports.
+ * o Removed a redundant MOD_{INC,DEC}_USE_COUNT pair in airport.c
+ * o Don't attempt to do hardware level multicast reception on
+ * Intersil firmware, just go promisc instead.
+ * o Typo fixed in hermes_issue_cmd()
+ * o Eliminated WIRELESS_SPY #ifdefs
+ * o Status code reported on Tx exceptions
+ * o Moved netif_wake_queue() from ALLOC interrupts to TX and TXEXC
+ * interrupts, which should fix the timeouts we're seeing.
+ *
+ * v0.09b -> v0.10 - 25 Feb 2002 - David Gibson
+ * o Removed nested structures used for header parsing, so the
+ * driver should now work without hackery on ARM
+ * o Fix for WEP handling on Intersil (Hawk Newton)
+ * o Eliminated the /proc/hermes/ethXX/regs debugging file. It
+ * was never very useful.
+ * o Make Rx errors less noisy.
+ *
+ * v0.10 -> v0.11 - 5 Apr 2002 - David Gibson
+ * o Laid the groundwork in hermes.[ch] for devices which map
+ * into PCI memory space rather than IO space.
+ * o Fixed bug in multicast handling (cleared multicast list when
+ * leaving promiscuous mode).
+ * o Relegated Tx error messages to debug.
+ * o Cleaned up / corrected handling of allocation lengths.
+ * o Set OWNSSID in IBSS mode for WinXP interoperability (jimc).
+ * o Change to using alloc_etherdev() for structure allocations.
+ * o Check for and drop undersized packets.
+ * o Fixed a race in stopping/waking the queue. This should fix
+ * the timeout problems (Pavel Roskin)
+ * o Reverted to netif_wake_queue() on the ALLOC event.
+ * o Fixes for recent Symbol firmwares which lack AP density
+ * (Pavel Roskin).
+ *
+ * v0.11 -> v0.11a - 29 Apr 2002 - David Gibson
+ * o Handle different register spacing, necessary for Prism 2.5
+ * PCI adaptors (Steve Hill).
+ * o Cleaned up initialization of card structures in orinoco_cs
+ * and airport. Removed card->priv field.
+ * o Make response structure optional for hermes_docmd_wait()
+ * Pavel Roskin)
+ * o Added PCI id for Nortel emobility to orinoco_plx.c.
+ * o Cleanup to handling of Symbol's allocation bug. (Pavel Roskin)
+ * o Cleanups to firmware capability detection.
+ * o Arrange for orinoco_pci.c to override firmware detection.
+ * We should be able to support the PCI Intersil cards now.
+ * o Cleanup handling of reset_cor and hard_reset (Pavel Roskin).
+ * o Remove erroneous use of USER_BAP in the TxExc handler (Jouni
+ * Malinen).
+ * o Makefile changes for better integration into David Hinds
+ * pcmcia-cs package.
+ *
+ * v0.11a -> v0.11b - 1 May 2002 - David Gibson
+ * o Better error reporting in orinoco_plx_init_one()
+ * o Fixed multiple bad kfree() bugs introduced by the
+ * alloc_orinocodev() changes.
+ *
+ * v0.11b -> v0.12 - 19 Jun 2002 - David Gibson
+ * o Support changing the MAC address.
+ * o Correct display of Intersil firmware revision numbers.
+ * o Entirely revised locking scheme. Should be both simpler and
+ * better.
+ * o Merged some common code in orinoco_plx, orinoco_pci and
+ * airport by creating orinoco_default_{open,stop,reset}()
+ * which are used as the dev->open, dev->stop, priv->reset
+ * callbacks if none are specified when alloc_orinocodev() is
+ * called.
+ * o Removed orinoco_plx_interrupt() and orinoco_pci_interrupt().
+ * They didn't do anything.
+ *
+ * v0.12 -> v0.12a - 4 Jul 2002 - David Gibson
+ * o Some rearrangement of code.
+ * o Numerous fixups to locking and rest handling, particularly
+ * for PCMCIA.
+ * o This allows open and stop net_device methods to be in
+ * orinoco.c now, rather than in the init modules.
+ * o In orinoco_cs.c link->priv now points to the struct
+ * net_device not to the struct orinoco_private.
+ * o Added a check for undersized SNAP frames, which could cause
+ * crashes.
+ *
+ * v0.12a -> v0.12b - 11 Jul 2002 - David Gibson
+ * o Fix hw->num_init testing code, so num_init is actually
+ * incremented.
+ * o Fix very stupid bug in orinoco_cs which broke compile with
+ * CONFIG_SMP.
+ * o Squashed a warning.
+ *
+ * v0.12b -> v0.12c - 26 Jul 2002 - David Gibson
+ * o Change to C9X style designated initializers.
+ * o Add support for 3Com AirConnect PCI.
+ * o No longer ignore the hard_reset argument to
+ * alloc_orinocodev(). Oops.
+ *
+ * v0.12c -> v0.13beta1 - 13 Sep 2002 - David Gibson
+ * o Revert the broken 0.12* locking scheme and go to a new yet
+ * simpler scheme.
+ * o Do firmware resets only in orinoco_init() and when waking
+ * the card from hard sleep.
+ *
+ * v0.13beta1 -> v0.13 - 27 Sep 2002 - David Gibson
+ * o Re-introduced full resets (via schedule_task()) on Tx
+ * timeout.
+ *
+ * v0.13 -> v0.13a - 30 Sep 2002 - David Gibson
+ * o Minor cleanups to info frame handling. Add basic support
+ * for linkstatus info frames.
+ * o Include required kernel headers in orinoco.h, to avoid
+ * compile problems.
+ *
+ * v0.13a -> v0.13b - 10 Feb 2003 - David Gibson
+ * o Implemented hard reset for Airport cards
+ * o Experimental suspend/resume implementation for orinoco_pci
+ * o Abolished /proc debugging support, replaced with a debugging
+ * iwpriv. Now it's ugly and simple instead of ugly and complex.
+ * o Bugfix in hermes.c if the firmware returned a record length
+ * of 0, we could go clobbering memory.
+ * o Bugfix in orinoco_stop() - it used to fail if hw_unavailable
+ * was set, which was usually true on PCMCIA hot removes.
+ * o Track LINKSTATUS messages, silently drop Tx packets before
+ * we are connected (avoids confusing the firmware), and only
+ * give LINKSTATUS printk()s if the status has changed.
+ *
+ * v0.13b -> v0.13c - 11 Mar 2003 - David Gibson
+ * o Cleanup: use dev instead of priv in various places.
+ * o Bug fix: Don't ReleaseConfiguration on RESET_PHYSICAL event
+ * if we're in the middle of a (driver initiated) hard reset.
+ * o Bug fix: ETH_ZLEN is supposed to include the header
+ * (Dionysus Blazakis & Manish Karir)
+ * o Convert to using workqueues instead of taskqueues (and
+ * backwards compatibility macros for pre 2.5.41 kernels).
+ * o Drop redundant (I think...) MOD_{INC,DEC}_USE_COUNT in
+ * airport.c
+ * o New orinoco_tmd.c init module from Joerg Dorchain for
+ * TMD7160 based PCI to PCMCIA bridges (similar to
+ * orinoco_plx.c).
+ *
+ * v0.13c -> v0.13d - 22 Apr 2003 - David Gibson
+ * o Make hw_unavailable a counter, rather than just a flag, this
+ * is necessary to avoid some races (such as a card being
+ * removed in the middle of orinoco_reset().
+ * o Restore Release/RequestConfiguration in the PCMCIA event handler
+ * when dealing with a driver initiated hard reset. This is
+ * necessary to prevent hangs due to a spurious interrupt while
+ * the reset is in progress.
+ * o Clear the 802.11 header when transmitting, even though we
+ * don't use it. This fixes a long standing bug on some
+ * firmwares, which seem to get confused if that isn't done.
+ * o Be less eager to de-encapsulate SNAP frames, only do so if
+ * the OUI is 00:00:00 or 00:00:f8, leave others alone. The old
+ * behaviour broke CDP (Cisco Discovery Protocol).
+ * o Use dev instead of priv for free_irq() as well as
+ * request_irq() (oops).
+ * o Attempt to reset rather than giving up if we get too many
+ * IRQs.
+ * o Changed semantics of __orinoco_down() so it can be called
+ * safely with hw_unavailable set. It also now clears the
+ * linkstatus (since we're going to have to reassociate).
+ *
+ * v0.13d -> v0.13e - 12 May 2003 - David Gibson
+ * o Support for post-2.5.68 return values from irq handler.
+ * o Fixed bug where underlength packets would be double counted
+ * in the rx_dropped statistics.
+ * o Provided a module parameter to suppress linkstatus messages.
+ *
+ * v0.13e -> v0.14alpha1 - 30 Sep 2003 - David Gibson
+ * o Replaced priv->connected logic with netif_carrier_on/off()
+ * calls.
+ * o Remove has_ibss_any and never set the CREATEIBSS RID when
+ * the ESSID is empty. Too many firmwares break if we do.
+ * o 2.6 merges: Replace pdev->slot_name with pci_name(), remove
+ * __devinitdata from PCI ID tables, use free_netdev().
+ * o Enabled shared-key authentication for Agere firmware (from
+ * Robert J. Moore <Robert.J.Moore AT allanbank.com>
+ * o Move netif_wake_queue() (back) to the Tx completion from the
+ * ALLOC event. This seems to prevent/mitigate the rolling
+ * error -110 problems at least on some Intersil firmwares.
+ * Theoretically reduces performance, but I can't measure it.
+ * Patch from Andrew Tridgell <tridge AT samba.org>
+ *
+ * v0.14alpha1 -> v0.14alpha2 - 20 Oct 2003 - David Gibson
+ * o Correctly turn off shared-key authentication when requested
+ * (bugfix from Robert J. Moore).
+ * o Correct airport sleep interfaces for current 2.6 kernels.
+ * o Add code for key change without disabling/enabling the MAC
+ * port. This is supposed to allow 802.1x to work sanely, but
+ * doesn't seem to yet.
+ *
+ * TODO
+ * o New wireless extensions API (patch from Moustafa
+ * Youssef, updated by Jim Carter and Pavel Roskin).
+ * o Handle de-encapsulation within network layer, provide 802.11
+ * headers (patch from Thomas 'Dent' Mirlacher)
+ * o RF monitor mode support
+ * o Fix possible races in SPY handling.
+ * o Disconnect wireless extensions from fundamental configuration.
+ * o (maybe) Software WEP support (patch from Stano Meduna).
+ * o (maybe) Use multiple Tx buffers - driver handling queue
+ * rather than firmware.
+ */
+
+/* Locking and synchronization:
+ *
+ * The basic principle is that everything is serialized through a
+ * single spinlock, priv->lock. The lock is used in user, bh and irq
+ * context, so when taken outside hardirq context it should always be
+ * taken with interrupts disabled. The lock protects both the
+ * hardware and the struct orinoco_private.
+ *
+ * Another flag, priv->hw_unavailable indicates that the hardware is
+ * unavailable for an extended period of time (e.g. suspended, or in
+ * the middle of a hard reset). This flag is protected by the
+ * spinlock. All code which touches the hardware should check the
+ * flag after taking the lock, and if it is set, give up on whatever
+ * they are doing and drop the lock again. The orinoco_lock()
+ * function handles this (it unlocks and returns -EBUSY if
+ * hw_unavailable is non-zero).
+ */
+
+#define DRIVER_NAME "orinoco"
+
+#include <linux/config.h>
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/ioport.h>
+#include <linux/netdevice.h>
+#include <linux/if_arp.h>
+#include <linux/etherdevice.h>
+#include <linux/wireless.h>
+
+#include <asm/uaccess.h>
+#include <asm/io.h>
+#include <asm/system.h>
+
+#include "hermes.h"
+#include "hermes_rid.h"
+#include "orinoco.h"
+#include "ieee802_11.h"
+
+/********************************************************************/
+/* Module information */
+/********************************************************************/
+
+MODULE_AUTHOR("Pavel Roskin <proski@gnu.org> & David Gibson <hermes@gibson.dropbear.id.au>");
+MODULE_DESCRIPTION("Driver for Lucent Orinoco, Prism II based and similar wireless cards");
+MODULE_LICENSE("Dual MPL/GPL");
+
+/* Level of debugging. Used in the macros in orinoco.h */
+#ifdef ORINOCO_DEBUG
+int orinoco_debug = ORINOCO_DEBUG;
+module_param(orinoco_debug, int, 0644);
+MODULE_PARM_DESC(orinoco_debug, "Debug level");
+EXPORT_SYMBOL(orinoco_debug);
+#endif
+
+static int suppress_linkstatus; /* = 0 */
+module_param(suppress_linkstatus, bool, 0644);
+MODULE_PARM_DESC(suppress_linkstatus, "Don't log link status changes");
+
+/********************************************************************/
+/* Compile time configuration and compatibility stuff */
+/********************************************************************/
+
+/* We do this this way to avoid ifdefs in the actual code */
+#ifdef WIRELESS_SPY
+#define SPY_NUMBER(priv) (priv->spy_number)
+#else
+#define SPY_NUMBER(priv) 0
+#endif /* WIRELESS_SPY */
+
+/********************************************************************/
+/* Internal constants */
+/********************************************************************/
+
+#define ORINOCO_MIN_MTU 256
+#define ORINOCO_MAX_MTU (IEEE802_11_DATA_LEN - ENCAPS_OVERHEAD)
+
+#define SYMBOL_MAX_VER_LEN (14)
+#define USER_BAP 0
+#define IRQ_BAP 1
+#define MAX_IRQLOOPS_PER_IRQ 10
+#define MAX_IRQLOOPS_PER_JIFFY (20000/HZ) /* Based on a guestimate of
+ * how many events the
+ * device could
+ * legitimately generate */
+#define SMALL_KEY_SIZE 5
+#define LARGE_KEY_SIZE 13
+#define TX_NICBUF_SIZE_BUG 1585 /* Bug in Symbol firmware */
+
+#define DUMMY_FID 0xFFFF
+
+/*#define MAX_MULTICAST(priv) (priv->firmware_type == FIRMWARE_TYPE_AGERE ? \
+ HERMES_MAX_MULTICAST : 0)*/
+#define MAX_MULTICAST(priv) (HERMES_MAX_MULTICAST)
+
+#define ORINOCO_INTEN (HERMES_EV_RX | HERMES_EV_ALLOC \
+ | HERMES_EV_TX | HERMES_EV_TXEXC \
+ | HERMES_EV_WTERR | HERMES_EV_INFO \
+ | HERMES_EV_INFDROP )
+
+/********************************************************************/
+/* Data tables */
+/********************************************************************/
+
+/* The frequency of each channel in MHz */
+static const long channel_frequency[] = {
+ 2412, 2417, 2422, 2427, 2432, 2437, 2442,
+ 2447, 2452, 2457, 2462, 2467, 2472, 2484
+};
+#define NUM_CHANNELS ARRAY_SIZE(channel_frequency)
+
+/* This tables gives the actual meanings of the bitrate IDs returned
+ * by the firmware. */
+static struct {
+ int bitrate; /* in 100s of kilobits */
+ int automatic;
+ u16 agere_txratectrl;
+ u16 intersil_txratectrl;
+} bitrate_table[] = {
+ {110, 1, 3, 15}, /* Entry 0 is the default */
+ {10, 0, 1, 1},
+ {10, 1, 1, 1},
+ {20, 0, 2, 2},
+ {20, 1, 6, 3},
+ {55, 0, 4, 4},
+ {55, 1, 7, 7},
+ {110, 0, 5, 8},
+};
+#define BITRATE_TABLE_SIZE ARRAY_SIZE(bitrate_table)
+
+/********************************************************************/
+/* Data types */
+/********************************************************************/
+
+struct header_struct {
+ /* 802.3 */
+ u8 dest[ETH_ALEN];
+ u8 src[ETH_ALEN];
+ u16 len;
+ /* 802.2 */
+ u8 dsap;
+ u8 ssap;
+ u8 ctrl;
+ /* SNAP */
+ u8 oui[3];
+ u16 ethertype;
+} __attribute__ ((packed));
+
+/* 802.2 LLC/SNAP header used for Ethernet encapsulation over 802.11 */
+u8 encaps_hdr[] = {0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00};
+
+#define ENCAPS_OVERHEAD (sizeof(encaps_hdr) + 2)
+
+struct hermes_rx_descriptor {
+ u16 status;
+ u32 time;
+ u8 silence;
+ u8 signal;
+ u8 rate;
+ u8 rxflow;
+ u32 reserved;
+} __attribute__ ((packed));
+
+/********************************************************************/
+/* Function prototypes */
+/********************************************************************/
+
+static int orinoco_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
+static int __orinoco_program_rids(struct net_device *dev);
+static void __orinoco_set_multicast_list(struct net_device *dev);
+static int orinoco_debug_dump_recs(struct net_device *dev);
+
+/********************************************************************/
+/* Internal helper functions */
+/********************************************************************/
+
+static inline void set_port_type(struct orinoco_private *priv)
+{
+ switch (priv->iw_mode) {
+ case IW_MODE_INFRA:
+ priv->port_type = 1;
+ priv->createibss = 0;
+ break;
+ case IW_MODE_ADHOC:
+ if (priv->prefer_port3) {
+ priv->port_type = 3;
+ priv->createibss = 0;
+ } else {
+ priv->port_type = priv->ibss_port;
+ priv->createibss = 1;
+ }
+ break;
+ default:
+ printk(KERN_ERR "%s: Invalid priv->iw_mode in set_port_type()\n",
+ priv->ndev->name);
+ }
+}
+
+/********************************************************************/
+/* Device methods */
+/********************************************************************/
+
+static int orinoco_open(struct net_device *dev)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ unsigned long flags;
+ int err;
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+
+ err = __orinoco_up(dev);
+
+ if (! err)
+ priv->open = 1;
+
+ orinoco_unlock(priv, &flags);
+
+ return err;
+}
+
+int orinoco_stop(struct net_device *dev)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ int err = 0;
+
+ /* We mustn't use orinoco_lock() here, because we need to be
+ able to close the interface even if hw_unavailable is set
+ (e.g. as we're released after a PC Card removal) */
+ spin_lock_irq(&priv->lock);
+
+ priv->open = 0;
+
+ err = __orinoco_down(dev);
+
+ spin_unlock_irq(&priv->lock);
+
+ return err;
+}
+
+static struct net_device_stats *orinoco_get_stats(struct net_device *dev)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+
+ return &priv->stats;
+}
+
+static struct iw_statistics *orinoco_get_wireless_stats(struct net_device *dev)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ hermes_t *hw = &priv->hw;
+ struct iw_statistics *wstats = &priv->wstats;
+ int err = 0;
+ unsigned long flags;
+
+ if (! netif_device_present(dev)) {
+ printk(KERN_WARNING "%s: get_wireless_stats() called while device not present\n",
+ dev->name);
+ return NULL; /* FIXME: Can we do better than this? */
+ }
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return NULL; /* FIXME: Erg, we've been signalled, how
+ * do we propagate this back up? */
+
+ if (priv->iw_mode == IW_MODE_ADHOC) {
+ memset(&wstats->qual, 0, sizeof(wstats->qual));
+ /* If a spy address is defined, we report stats of the
+ * first spy address - Jean II */
+ if (SPY_NUMBER(priv)) {
+ wstats->qual.qual = priv->spy_stat[0].qual;
+ wstats->qual.level = priv->spy_stat[0].level;
+ wstats->qual.noise = priv->spy_stat[0].noise;
+ wstats->qual.updated = priv->spy_stat[0].updated;
+ }
+ } else {
+ struct {
+ u16 qual, signal, noise;
+ } __attribute__ ((packed)) cq;
+
+ err = HERMES_READ_RECORD(hw, USER_BAP,
+ HERMES_RID_COMMSQUALITY, &cq);
+
+ wstats->qual.qual = (int)le16_to_cpu(cq.qual);
+ wstats->qual.level = (int)le16_to_cpu(cq.signal) - 0x95;
+ wstats->qual.noise = (int)le16_to_cpu(cq.noise) - 0x95;
+ wstats->qual.updated = 7;
+ }
+
+ /* We can't really wait for the tallies inquiry command to
+ * complete, so we just use the previous results and trigger
+ * a new tallies inquiry command for next time - Jean II */
+ /* FIXME: We're in user context (I think?), so we should just
+ wait for the tallies to come through */
+ err = hermes_inquire(hw, HERMES_INQ_TALLIES);
+
+ orinoco_unlock(priv, &flags);
+
+ if (err)
+ return NULL;
+
+ return wstats;
+}
+
+static void orinoco_set_multicast_list(struct net_device *dev)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ unsigned long flags;
+
+ if (orinoco_lock(priv, &flags) != 0) {
+ printk(KERN_DEBUG "%s: orinoco_set_multicast_list() "
+ "called when hw_unavailable\n", dev->name);
+ return;
+ }
+
+ __orinoco_set_multicast_list(dev);
+ orinoco_unlock(priv, &flags);
+}
+
+static int orinoco_change_mtu(struct net_device *dev, int new_mtu)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+
+ if ( (new_mtu < ORINOCO_MIN_MTU) || (new_mtu > ORINOCO_MAX_MTU) )
+ return -EINVAL;
+
+ if ( (new_mtu + ENCAPS_OVERHEAD + IEEE802_11_HLEN) >
+ (priv->nicbuf_size - ETH_HLEN) )
+ return -EINVAL;
+
+ dev->mtu = new_mtu;
+
+ return 0;
+}
+
+/********************************************************************/
+/* Tx path */
+/********************************************************************/
+
+static int orinoco_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ struct net_device_stats *stats = &priv->stats;
+ hermes_t *hw = &priv->hw;
+ int err = 0;
+ u16 txfid = priv->txfid;
+ char *p;
+ struct ethhdr *eh;
+ int len, data_len, data_off;
+ struct hermes_tx_descriptor desc;
+ unsigned long flags;
+
+ TRACE_ENTER(dev->name);
+
+ if (! netif_running(dev)) {
+ printk(KERN_ERR "%s: Tx on stopped device!\n",
+ dev->name);
+ TRACE_EXIT(dev->name);
+ return 1;
+ }
+
+ if (netif_queue_stopped(dev)) {
+ printk(KERN_DEBUG "%s: Tx while transmitter busy!\n",
+ dev->name);
+ TRACE_EXIT(dev->name);
+ return 1;
+ }
+
+ if (orinoco_lock(priv, &flags) != 0) {
+ printk(KERN_ERR "%s: orinoco_xmit() called while hw_unavailable\n",
+ dev->name);
+ TRACE_EXIT(dev->name);
+ return 1;
+ }
+
+ if (! netif_carrier_ok(dev)) {
+ /* Oops, the firmware hasn't established a connection,
+ silently drop the packet (this seems to be the
+ safest approach). */
+ stats->tx_errors++;
+ orinoco_unlock(priv, &flags);
+ dev_kfree_skb(skb);
+ TRACE_EXIT(dev->name);
+ return 0;
+ }
+
+ /* Length of the packet body */
+ /* FIXME: what if the skb is smaller than this? */
+ len = max_t(int,skb->len - ETH_HLEN, ETH_ZLEN - ETH_HLEN);
+
+ eh = (struct ethhdr *)skb->data;
+
+ memset(&desc, 0, sizeof(desc));
+ desc.tx_control = cpu_to_le16(HERMES_TXCTRL_TX_OK | HERMES_TXCTRL_TX_EX);
+ err = hermes_bap_pwrite(hw, USER_BAP, &desc, sizeof(desc), txfid, 0);
+ if (err) {
+ if (net_ratelimit())
+ printk(KERN_ERR "%s: Error %d writing Tx descriptor "
+ "to BAP\n", dev->name, err);
+ stats->tx_errors++;
+ goto fail;
+ }
+
+ /* Clear the 802.11 header and data length fields - some
+ * firmwares (e.g. Lucent/Agere 8.xx) appear to get confused
+ * if this isn't done. */
+ hermes_clear_words(hw, HERMES_DATA0,
+ HERMES_802_3_OFFSET - HERMES_802_11_OFFSET);
+
+ /* Encapsulate Ethernet-II frames */
+ if (ntohs(eh->h_proto) > ETH_DATA_LEN) { /* Ethernet-II frame */
+ struct header_struct hdr;
+ data_len = len;
+ data_off = HERMES_802_3_OFFSET + sizeof(hdr);
+ p = skb->data + ETH_HLEN;
+
+ /* 802.3 header */
+ memcpy(hdr.dest, eh->h_dest, ETH_ALEN);
+ memcpy(hdr.src, eh->h_source, ETH_ALEN);
+ hdr.len = htons(data_len + ENCAPS_OVERHEAD);
+
+ /* 802.2 header */
+ memcpy(&hdr.dsap, &encaps_hdr, sizeof(encaps_hdr));
+
+ hdr.ethertype = eh->h_proto;
+ err = hermes_bap_pwrite(hw, USER_BAP, &hdr, sizeof(hdr),
+ txfid, HERMES_802_3_OFFSET);
+ if (err) {
+ if (net_ratelimit())
+ printk(KERN_ERR "%s: Error %d writing packet "
+ "header to BAP\n", dev->name, err);
+ stats->tx_errors++;
+ goto fail;
+ }
+ } else { /* IEEE 802.3 frame */
+ data_len = len + ETH_HLEN;
+ data_off = HERMES_802_3_OFFSET;
+ p = skb->data;
+ }
+
+ /* Round up for odd length packets */
+ err = hermes_bap_pwrite(hw, USER_BAP, p, ALIGN(data_len, 2),
+ txfid, data_off);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d writing packet to BAP\n",
+ dev->name, err);
+ stats->tx_errors++;
+ goto fail;
+ }
+
+ /* Finally, we actually initiate the send */
+ netif_stop_queue(dev);
+
+ err = hermes_docmd_wait(hw, HERMES_CMD_TX | HERMES_CMD_RECL,
+ txfid, NULL);
+ if (err) {
+ netif_start_queue(dev);
+ printk(KERN_ERR "%s: Error %d transmitting packet\n",
+ dev->name, err);
+ stats->tx_errors++;
+ goto fail;
+ }
+
+ dev->trans_start = jiffies;
+ stats->tx_bytes += data_off + data_len;
+
+ orinoco_unlock(priv, &flags);
+
+ dev_kfree_skb(skb);
+
+ TRACE_EXIT(dev->name);
+
+ return 0;
+ fail:
+ TRACE_EXIT(dev->name);
+
+ orinoco_unlock(priv, &flags);
+ return err;
+}
+
+static void __orinoco_ev_alloc(struct net_device *dev, hermes_t *hw)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ u16 fid = hermes_read_regn(hw, ALLOCFID);
+
+ if (fid != priv->txfid) {
+ if (fid != DUMMY_FID)
+ printk(KERN_WARNING "%s: Allocate event on unexpected fid (%04X)\n",
+ dev->name, fid);
+ return;
+ }
+
+ hermes_write_regn(hw, ALLOCFID, DUMMY_FID);
+}
+
+static void __orinoco_ev_tx(struct net_device *dev, hermes_t *hw)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ struct net_device_stats *stats = &priv->stats;
+
+ stats->tx_packets++;
+
+ netif_wake_queue(dev);
+
+ hermes_write_regn(hw, TXCOMPLFID, DUMMY_FID);
+}
+
+static void __orinoco_ev_txexc(struct net_device *dev, hermes_t *hw)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ struct net_device_stats *stats = &priv->stats;
+ u16 fid = hermes_read_regn(hw, TXCOMPLFID);
+ struct hermes_tx_descriptor desc;
+ int err = 0;
+
+ if (fid == DUMMY_FID)
+ return; /* Nothing's really happened */
+
+ err = hermes_bap_pread(hw, IRQ_BAP, &desc, sizeof(desc), fid, 0);
+ if (err) {
+ printk(KERN_WARNING "%s: Unable to read descriptor on Tx error "
+ "(FID=%04X error %d)\n",
+ dev->name, fid, err);
+ } else {
+ DEBUG(1, "%s: Tx error, status %d\n",
+ dev->name, le16_to_cpu(desc.status));
+ }
+
+ stats->tx_errors++;
+
+ netif_wake_queue(dev);
+ hermes_write_regn(hw, TXCOMPLFID, DUMMY_FID);
+}
+
+static void orinoco_tx_timeout(struct net_device *dev)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ struct net_device_stats *stats = &priv->stats;
+ struct hermes *hw = &priv->hw;
+
+ printk(KERN_WARNING "%s: Tx timeout! "
+ "ALLOCFID=%04x, TXCOMPLFID=%04x, EVSTAT=%04x\n",
+ dev->name, hermes_read_regn(hw, ALLOCFID),
+ hermes_read_regn(hw, TXCOMPLFID), hermes_read_regn(hw, EVSTAT));
+
+ stats->tx_errors++;
+
+ schedule_work(&priv->reset_work);
+}
+
+/********************************************************************/
+/* Rx path (data frames) */
+/********************************************************************/
+
+/* Does the frame have a SNAP header indicating it should be
+ * de-encapsulated to Ethernet-II? */
+static inline int is_ethersnap(void *_hdr)
+{
+ u8 *hdr = _hdr;
+
+ /* We de-encapsulate all packets which, a) have SNAP headers
+ * (i.e. SSAP=DSAP=0xaa and CTRL=0x3 in the 802.2 LLC header
+ * and where b) the OUI of the SNAP header is 00:00:00 or
+ * 00:00:f8 - we need both because different APs appear to use
+ * different OUIs for some reason */
+ return (memcmp(hdr, &encaps_hdr, 5) == 0)
+ && ( (hdr[5] == 0x00) || (hdr[5] == 0xf8) );
+}
+
+static inline void orinoco_spy_gather(struct net_device *dev, u_char *mac,
+ int level, int noise)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ int i;
+
+ /* Gather wireless spy statistics: for each packet, compare the
+ * source address with out list, and if match, get the stats... */
+ for (i = 0; i < priv->spy_number; i++)
+ if (!memcmp(mac, priv->spy_address[i], ETH_ALEN)) {
+ priv->spy_stat[i].level = level - 0x95;
+ priv->spy_stat[i].noise = noise - 0x95;
+ priv->spy_stat[i].qual = (level > noise) ? (level - noise) : 0;
+ priv->spy_stat[i].updated = 7;
+ }
+}
+
+static void orinoco_stat_gather(struct net_device *dev,
+ struct sk_buff *skb,
+ struct hermes_rx_descriptor *desc)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+
+ /* Using spy support with lots of Rx packets, like in an
+ * infrastructure (AP), will really slow down everything, because
+ * the MAC address must be compared to each entry of the spy list.
+ * If the user really asks for it (set some address in the
+ * spy list), we do it, but he will pay the price.
+ * Note that to get here, you need both WIRELESS_SPY
+ * compiled in AND some addresses in the list !!!
+ */
+ /* Note : gcc will optimise the whole section away if
+ * WIRELESS_SPY is not defined... - Jean II */
+ if (SPY_NUMBER(priv)) {
+ orinoco_spy_gather(dev, skb->mac.raw + ETH_ALEN,
+ desc->signal, desc->silence);
+ }
+}
+
+static void __orinoco_ev_rx(struct net_device *dev, hermes_t *hw)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ struct net_device_stats *stats = &priv->stats;
+ struct iw_statistics *wstats = &priv->wstats;
+ struct sk_buff *skb = NULL;
+ u16 rxfid, status;
+ int length, data_len, data_off;
+ char *p;
+ struct hermes_rx_descriptor desc;
+ struct header_struct hdr;
+ struct ethhdr *eh;
+ int err;
+
+ rxfid = hermes_read_regn(hw, RXFID);
+
+ err = hermes_bap_pread(hw, IRQ_BAP, &desc, sizeof(desc),
+ rxfid, 0);
+ if (err) {
+ printk(KERN_ERR "%s: error %d reading Rx descriptor. "
+ "Frame dropped.\n", dev->name, err);
+ stats->rx_errors++;
+ goto drop;
+ }
+
+ status = le16_to_cpu(desc.status);
+
+ if (status & HERMES_RXSTAT_ERR) {
+ if (status & HERMES_RXSTAT_UNDECRYPTABLE) {
+ wstats->discard.code++;
+ DEBUG(1, "%s: Undecryptable frame on Rx. Frame dropped.\n",
+ dev->name);
+ } else {
+ stats->rx_crc_errors++;
+ DEBUG(1, "%s: Bad CRC on Rx. Frame dropped.\n", dev->name);
+ }
+ stats->rx_errors++;
+ goto drop;
+ }
+
+ /* For now we ignore the 802.11 header completely, assuming
+ that the card's firmware has handled anything vital */
+
+ err = hermes_bap_pread(hw, IRQ_BAP, &hdr, sizeof(hdr),
+ rxfid, HERMES_802_3_OFFSET);
+ if (err) {
+ printk(KERN_ERR "%s: error %d reading frame header. "
+ "Frame dropped.\n", dev->name, err);
+ stats->rx_errors++;
+ goto drop;
+ }
+
+ length = ntohs(hdr.len);
+
+ /* Sanity checks */
+ if (length < 3) { /* No for even an 802.2 LLC header */
+ /* At least on Symbol firmware with PCF we get quite a
+ lot of these legitimately - Poll frames with no
+ data. */
+ stats->rx_dropped++;
+ goto drop;
+ }
+ if (length > IEEE802_11_DATA_LEN) {
+ printk(KERN_WARNING "%s: Oversized frame received (%d bytes)\n",
+ dev->name, length);
+ stats->rx_length_errors++;
+ stats->rx_errors++;
+ goto drop;
+ }
+
+ /* We need space for the packet data itself, plus an ethernet
+ header, plus 2 bytes so we can align the IP header on a
+ 32bit boundary, plus 1 byte so we can read in odd length
+ packets from the card, which has an IO granularity of 16
+ bits */
+ skb = dev_alloc_skb(length+ETH_HLEN+2+1);
+ if (!skb) {
+ printk(KERN_WARNING "%s: Can't allocate skb for Rx\n",
+ dev->name);
+ goto drop;
+ }
+
+ skb_reserve(skb, 2); /* This way the IP header is aligned */
+
+ /* Handle decapsulation
+ * In most cases, the firmware tell us about SNAP frames.
+ * For some reason, the SNAP frames sent by LinkSys APs
+ * are not properly recognised by most firmwares.
+ * So, check ourselves */
+ if (((status & HERMES_RXSTAT_MSGTYPE) == HERMES_RXSTAT_1042) ||
+ ((status & HERMES_RXSTAT_MSGTYPE) == HERMES_RXSTAT_TUNNEL) ||
+ is_ethersnap(&hdr)) {
+ /* These indicate a SNAP within 802.2 LLC within
+ 802.11 frame which we'll need to de-encapsulate to
+ the original EthernetII frame. */
+
+ if (length < ENCAPS_OVERHEAD) { /* No room for full LLC+SNAP */
+ stats->rx_length_errors++;
+ goto drop;
+ }
+
+ /* Remove SNAP header, reconstruct EthernetII frame */
+ data_len = length - ENCAPS_OVERHEAD;
+ data_off = HERMES_802_3_OFFSET + sizeof(hdr);
+
+ eh = (struct ethhdr *)skb_put(skb, ETH_HLEN);
+
+ memcpy(eh, &hdr, 2 * ETH_ALEN);
+ eh->h_proto = hdr.ethertype;
+ } else {
+ /* All other cases indicate a genuine 802.3 frame. No
+ decapsulation needed. We just throw the whole
+ thing in, and hope the protocol layer can deal with
+ it as 802.3 */
+ data_len = length;
+ data_off = HERMES_802_3_OFFSET;
+ /* FIXME: we re-read from the card data we already read here */
+ }
+
+ p = skb_put(skb, data_len);
+ err = hermes_bap_pread(hw, IRQ_BAP, p, ALIGN(data_len, 2),
+ rxfid, data_off);
+ if (err) {
+ printk(KERN_ERR "%s: error %d reading frame. "
+ "Frame dropped.\n", dev->name, err);
+ stats->rx_errors++;
+ goto drop;
+ }
+
+ dev->last_rx = jiffies;
+ skb->dev = dev;
+ skb->protocol = eth_type_trans(skb, dev);
+ skb->ip_summed = CHECKSUM_NONE;
+
+ /* Process the wireless stats if needed */
+ orinoco_stat_gather(dev, skb, &desc);
+
+ /* Pass the packet to the networking stack */
+ netif_rx(skb);
+ stats->rx_packets++;
+ stats->rx_bytes += length;
+
+ return;
+
+ drop:
+ stats->rx_dropped++;
+
+ if (skb)
+ dev_kfree_skb_irq(skb);
+ return;
+}
+
+/********************************************************************/
+/* Rx path (info frames) */
+/********************************************************************/
+
+static void print_linkstatus(struct net_device *dev, u16 status)
+{
+ char * s;
+
+ if (suppress_linkstatus)
+ return;
+
+ switch (status) {
+ case HERMES_LINKSTATUS_NOT_CONNECTED:
+ s = "Not Connected";
+ break;
+ case HERMES_LINKSTATUS_CONNECTED:
+ s = "Connected";
+ break;
+ case HERMES_LINKSTATUS_DISCONNECTED:
+ s = "Disconnected";
+ break;
+ case HERMES_LINKSTATUS_AP_CHANGE:
+ s = "AP Changed";
+ break;
+ case HERMES_LINKSTATUS_AP_OUT_OF_RANGE:
+ s = "AP Out of Range";
+ break;
+ case HERMES_LINKSTATUS_AP_IN_RANGE:
+ s = "AP In Range";
+ break;
+ case HERMES_LINKSTATUS_ASSOC_FAILED:
+ s = "Association Failed";
+ break;
+ default:
+ s = "UNKNOWN";
+ }
+
+ printk(KERN_INFO "%s: New link status: %s (%04x)\n",
+ dev->name, s, status);
+}
+
+static void __orinoco_ev_info(struct net_device *dev, hermes_t *hw)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ u16 infofid;
+ struct {
+ u16 len;
+ u16 type;
+ } __attribute__ ((packed)) info;
+ int len, type;
+ int err;
+
+ /* This is an answer to an INQUIRE command that we did earlier,
+ * or an information "event" generated by the card
+ * The controller return to us a pseudo frame containing
+ * the information in question - Jean II */
+ infofid = hermes_read_regn(hw, INFOFID);
+
+ /* Read the info frame header - don't try too hard */
+ err = hermes_bap_pread(hw, IRQ_BAP, &info, sizeof(info),
+ infofid, 0);
+ if (err) {
+ printk(KERN_ERR "%s: error %d reading info frame. "
+ "Frame dropped.\n", dev->name, err);
+ return;
+ }
+
+ len = HERMES_RECLEN_TO_BYTES(le16_to_cpu(info.len));
+ type = le16_to_cpu(info.type);
+
+ switch (type) {
+ case HERMES_INQ_TALLIES: {
+ struct hermes_tallies_frame tallies;
+ struct iw_statistics *wstats = &priv->wstats;
+
+ if (len > sizeof(tallies)) {
+ printk(KERN_WARNING "%s: Tallies frame too long (%d bytes)\n",
+ dev->name, len);
+ len = sizeof(tallies);
+ }
+
+ /* Read directly the data (no seek) */
+ hermes_read_words(hw, HERMES_DATA1, (void *) &tallies,
+ len / 2); /* FIXME: blech! */
+
+ /* Increment our various counters */
+ /* wstats->discard.nwid - no wrong BSSID stuff */
+ wstats->discard.code +=
+ le16_to_cpu(tallies.RxWEPUndecryptable);
+ if (len == sizeof(tallies))
+ wstats->discard.code +=
+ le16_to_cpu(tallies.RxDiscards_WEPICVError) +
+ le16_to_cpu(tallies.RxDiscards_WEPExcluded);
+ wstats->discard.misc +=
+ le16_to_cpu(tallies.TxDiscardsWrongSA);
+ wstats->discard.fragment +=
+ le16_to_cpu(tallies.RxMsgInBadMsgFragments);
+ wstats->discard.retries +=
+ le16_to_cpu(tallies.TxRetryLimitExceeded);
+ /* wstats->miss.beacon - no match */
+ }
+ break;
+ case HERMES_INQ_LINKSTATUS: {
+ struct hermes_linkstatus linkstatus;
+ u16 newstatus;
+ int connected;
+
+ if (len != sizeof(linkstatus)) {
+ printk(KERN_WARNING "%s: Unexpected size for linkstatus frame (%d bytes)\n",
+ dev->name, len);
+ break;
+ }
+
+ hermes_read_words(hw, HERMES_DATA1, (void *) &linkstatus,
+ len / 2);
+ newstatus = le16_to_cpu(linkstatus.linkstatus);
+
+ connected = (newstatus == HERMES_LINKSTATUS_CONNECTED)
+ || (newstatus == HERMES_LINKSTATUS_AP_CHANGE)
+ || (newstatus == HERMES_LINKSTATUS_AP_IN_RANGE);
+
+ if (connected)
+ netif_carrier_on(dev);
+ else
+ netif_carrier_off(dev);
+
+ if (newstatus != priv->last_linkstatus)
+ print_linkstatus(dev, newstatus);
+
+ priv->last_linkstatus = newstatus;
+ }
+ break;
+ default:
+ printk(KERN_DEBUG "%s: Unknown information frame received: "
+ "type 0x%04x, length %d\n", dev->name, type, len);
+ /* We don't actually do anything about it */
+ break;
+ }
+}
+
+static void __orinoco_ev_infdrop(struct net_device *dev, hermes_t *hw)
+{
+ if (net_ratelimit())
+ printk(KERN_DEBUG "%s: Information frame lost.\n", dev->name);
+}
+
+/********************************************************************/
+/* Internal hardware control routines */
+/********************************************************************/
+
+int __orinoco_up(struct net_device *dev)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ struct hermes *hw = &priv->hw;
+ int err;
+
+ err = __orinoco_program_rids(dev);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d configuring card\n",
+ dev->name, err);
+ return err;
+ }
+
+ /* Fire things up again */
+ hermes_set_irqmask(hw, ORINOCO_INTEN);
+ err = hermes_enable_port(hw, 0);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d enabling MAC port\n",
+ dev->name, err);
+ return err;
+ }
+
+ netif_start_queue(dev);
+
+ return 0;
+}
+
+int __orinoco_down(struct net_device *dev)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ struct hermes *hw = &priv->hw;
+ int err;
+
+ netif_stop_queue(dev);
+
+ if (! priv->hw_unavailable) {
+ if (! priv->broken_disableport) {
+ err = hermes_disable_port(hw, 0);
+ if (err) {
+ /* Some firmwares (e.g. Intersil 1.3.x) seem
+ * to have problems disabling the port, oh
+ * well, too bad. */
+ printk(KERN_WARNING "%s: Error %d disabling MAC port\n",
+ dev->name, err);
+ priv->broken_disableport = 1;
+ }
+ }
+ hermes_set_irqmask(hw, 0);
+ hermes_write_regn(hw, EVACK, 0xffff);
+ }
+
+ /* firmware will have to reassociate */
+ netif_carrier_off(dev);
+ priv->last_linkstatus = 0xffff;
+
+ return 0;
+}
+
+int orinoco_reinit_firmware(struct net_device *dev)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ struct hermes *hw = &priv->hw;
+ int err;
+
+ err = hermes_init(hw);
+ if (err)
+ return err;
+
+ err = hermes_allocate(hw, priv->nicbuf_size, &priv->txfid);
+ if (err == -EIO) {
+ /* Try workaround for old Symbol firmware bug */
+ printk(KERN_WARNING "%s: firmware ALLOC bug detected "
+ "(old Symbol firmware?). Trying to work around... ",
+ dev->name);
+
+ priv->nicbuf_size = TX_NICBUF_SIZE_BUG;
+ err = hermes_allocate(hw, priv->nicbuf_size, &priv->txfid);
+ if (err)
+ printk("failed!\n");
+ else
+ printk("ok.\n");
+ }
+
+ return err;
+}
+
+static int __orinoco_hw_set_bitrate(struct orinoco_private *priv)
+{
+ hermes_t *hw = &priv->hw;
+ int err = 0;
+
+ if (priv->bitratemode >= BITRATE_TABLE_SIZE) {
+ printk(KERN_ERR "%s: BUG: Invalid bitrate mode %d\n",
+ priv->ndev->name, priv->bitratemode);
+ return -EINVAL;
+ }
+
+ switch (priv->firmware_type) {
+ case FIRMWARE_TYPE_AGERE:
+ err = hermes_write_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFTXRATECONTROL,
+ bitrate_table[priv->bitratemode].agere_txratectrl);
+ break;
+ case FIRMWARE_TYPE_INTERSIL:
+ case FIRMWARE_TYPE_SYMBOL:
+ err = hermes_write_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFTXRATECONTROL,
+ bitrate_table[priv->bitratemode].intersil_txratectrl);
+ break;
+ default:
+ BUG();
+ }
+
+ return err;
+}
+
+/* Change the WEP keys and/or the current keys. Can be called
+ * either from __orinoco_hw_setup_wep() or directly from
+ * orinoco_ioctl_setiwencode(). In the later case the association
+ * with the AP is not broken (if the firmware can handle it),
+ * which is needed for 802.1x implementations. */
+static int __orinoco_hw_setup_wepkeys(struct orinoco_private *priv)
+{
+ hermes_t *hw = &priv->hw;
+ int err = 0;
+
+ switch (priv->firmware_type) {
+ case FIRMWARE_TYPE_AGERE:
+ err = HERMES_WRITE_RECORD(hw, USER_BAP,
+ HERMES_RID_CNFWEPKEYS_AGERE,
+ &priv->keys);
+ if (err)
+ return err;
+ err = hermes_write_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFTXKEY_AGERE,
+ priv->tx_key);
+ if (err)
+ return err;
+ break;
+ case FIRMWARE_TYPE_INTERSIL:
+ case FIRMWARE_TYPE_SYMBOL:
+ {
+ int keylen;
+ int i;
+
+ /* Force uniform key length to work around firmware bugs */
+ keylen = le16_to_cpu(priv->keys[priv->tx_key].len);
+
+ if (keylen > LARGE_KEY_SIZE) {
+ printk(KERN_ERR "%s: BUG: Key %d has oversize length %d.\n",
+ priv->ndev->name, priv->tx_key, keylen);
+ return -E2BIG;
+ }
+
+ /* Write all 4 keys */
+ for(i = 0; i < ORINOCO_MAX_KEYS; i++) {
+ err = hermes_write_ltv(hw, USER_BAP,
+ HERMES_RID_CNFDEFAULTKEY0 + i,
+ HERMES_BYTES_TO_RECLEN(keylen),
+ priv->keys[i].data);
+ if (err)
+ return err;
+ }
+
+ /* Write the index of the key used in transmission */
+ err = hermes_write_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFWEPDEFAULTKEYID,
+ priv->tx_key);
+ if (err)
+ return err;
+ }
+ break;
+ }
+
+ return 0;
+}
+
+static int __orinoco_hw_setup_wep(struct orinoco_private *priv)
+{
+ hermes_t *hw = &priv->hw;
+ int err = 0;
+ int master_wep_flag;
+ int auth_flag;
+
+ if (priv->wep_on)
+ __orinoco_hw_setup_wepkeys(priv);
+
+ if (priv->wep_restrict)
+ auth_flag = HERMES_AUTH_SHARED_KEY;
+ else
+ auth_flag = HERMES_AUTH_OPEN;
+
+ switch (priv->firmware_type) {
+ case FIRMWARE_TYPE_AGERE: /* Agere style WEP */
+ if (priv->wep_on) {
+ /* Enable the shared-key authentication. */
+ err = hermes_write_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFAUTHENTICATION_AGERE,
+ auth_flag);
+ }
+ err = hermes_write_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFWEPENABLED_AGERE,
+ priv->wep_on);
+ if (err)
+ return err;
+ break;
+
+ case FIRMWARE_TYPE_INTERSIL: /* Intersil style WEP */
+ case FIRMWARE_TYPE_SYMBOL: /* Symbol style WEP */
+ if (priv->wep_on) {
+ if (priv->wep_restrict ||
+ (priv->firmware_type == FIRMWARE_TYPE_SYMBOL))
+ master_wep_flag = HERMES_WEP_PRIVACY_INVOKED |
+ HERMES_WEP_EXCL_UNENCRYPTED;
+ else
+ master_wep_flag = HERMES_WEP_PRIVACY_INVOKED;
+
+ err = hermes_write_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFAUTHENTICATION,
+ auth_flag);
+ if (err)
+ return err;
+ } else
+ master_wep_flag = 0;
+
+ if (priv->iw_mode == IW_MODE_MONITOR)
+ master_wep_flag |= HERMES_WEP_HOST_DECRYPT;
+
+ /* Master WEP setting : on/off */
+ err = hermes_write_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFWEPFLAGS_INTERSIL,
+ master_wep_flag);
+ if (err)
+ return err;
+
+ break;
+ }
+
+ return 0;
+}
+
+static int __orinoco_program_rids(struct net_device *dev)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ hermes_t *hw = &priv->hw;
+ int err;
+ struct hermes_idstring idbuf;
+
+ /* Set the MAC address */
+ err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFOWNMACADDR,
+ HERMES_BYTES_TO_RECLEN(ETH_ALEN), dev->dev_addr);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d setting MAC address\n",
+ dev->name, err);
+ return err;
+ }
+
+ /* Set up the link mode */
+ err = hermes_write_wordrec(hw, USER_BAP, HERMES_RID_CNFPORTTYPE,
+ priv->port_type);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d setting port type\n",
+ dev->name, err);
+ return err;
+ }
+ /* Set the channel/frequency */
+ if (priv->channel == 0) {
+ printk(KERN_DEBUG "%s: Channel is 0 in __orinoco_program_rids()\n", dev->name);
+ if (priv->createibss)
+ priv->channel = 10;
+ }
+ err = hermes_write_wordrec(hw, USER_BAP, HERMES_RID_CNFOWNCHANNEL,
+ priv->channel);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d setting channel\n",
+ dev->name, err);
+ return err;
+ }
+
+ if (priv->has_ibss) {
+ u16 createibss;
+
+ if ((strlen(priv->desired_essid) == 0) && (priv->createibss)) {
+ printk(KERN_WARNING "%s: This firmware requires an "
+ "ESSID in IBSS-Ad-Hoc mode.\n", dev->name);
+ /* With wvlan_cs, in this case, we would crash.
+ * hopefully, this driver will behave better...
+ * Jean II */
+ createibss = 0;
+ } else {
+ createibss = priv->createibss;
+ }
+
+ err = hermes_write_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFCREATEIBSS,
+ createibss);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d setting CREATEIBSS\n",
+ dev->name, err);
+ return err;
+ }
+ }
+
+ /* Set the desired ESSID */
+ idbuf.len = cpu_to_le16(strlen(priv->desired_essid));
+ memcpy(&idbuf.val, priv->desired_essid, sizeof(idbuf.val));
+ /* WinXP wants partner to configure OWNSSID even in IBSS mode. (jimc) */
+ err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFOWNSSID,
+ HERMES_BYTES_TO_RECLEN(strlen(priv->desired_essid)+2),
+ &idbuf);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d setting OWNSSID\n",
+ dev->name, err);
+ return err;
+ }
+ err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFDESIREDSSID,
+ HERMES_BYTES_TO_RECLEN(strlen(priv->desired_essid)+2),
+ &idbuf);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d setting DESIREDSSID\n",
+ dev->name, err);
+ return err;
+ }
+
+ /* Set the station name */
+ idbuf.len = cpu_to_le16(strlen(priv->nick));
+ memcpy(&idbuf.val, priv->nick, sizeof(idbuf.val));
+ err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFOWNNAME,
+ HERMES_BYTES_TO_RECLEN(strlen(priv->nick)+2),
+ &idbuf);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d setting nickname\n",
+ dev->name, err);
+ return err;
+ }
+
+ /* Set AP density */
+ if (priv->has_sensitivity) {
+ err = hermes_write_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFSYSTEMSCALE,
+ priv->ap_density);
+ if (err) {
+ printk(KERN_WARNING "%s: Error %d setting SYSTEMSCALE. "
+ "Disabling sensitivity control\n",
+ dev->name, err);
+
+ priv->has_sensitivity = 0;
+ }
+ }
+
+ /* Set RTS threshold */
+ err = hermes_write_wordrec(hw, USER_BAP, HERMES_RID_CNFRTSTHRESHOLD,
+ priv->rts_thresh);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d setting RTS threshold\n",
+ dev->name, err);
+ return err;
+ }
+
+ /* Set fragmentation threshold or MWO robustness */
+ if (priv->has_mwo)
+ err = hermes_write_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFMWOROBUST_AGERE,
+ priv->mwo_robust);
+ else
+ err = hermes_write_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFFRAGMENTATIONTHRESHOLD,
+ priv->frag_thresh);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d setting fragmentation\n",
+ dev->name, err);
+ return err;
+ }
+
+ /* Set bitrate */
+ err = __orinoco_hw_set_bitrate(priv);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d setting bitrate\n",
+ dev->name, err);
+ return err;
+ }
+
+ /* Set power management */
+ if (priv->has_pm) {
+ err = hermes_write_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFPMENABLED,
+ priv->pm_on);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d setting up PM\n",
+ dev->name, err);
+ return err;
+ }
+
+ err = hermes_write_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFMULTICASTRECEIVE,
+ priv->pm_mcast);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d setting up PM\n",
+ dev->name, err);
+ return err;
+ }
+ err = hermes_write_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFMAXSLEEPDURATION,
+ priv->pm_period);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d setting up PM\n",
+ dev->name, err);
+ return err;
+ }
+ err = hermes_write_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFPMHOLDOVERDURATION,
+ priv->pm_timeout);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d setting up PM\n",
+ dev->name, err);
+ return err;
+ }
+ }
+
+ /* Set preamble - only for Symbol so far... */
+ if (priv->has_preamble) {
+ err = hermes_write_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFPREAMBLE_SYMBOL,
+ priv->preamble);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d setting preamble\n",
+ dev->name, err);
+ return err;
+ }
+ }
+
+ /* Set up encryption */
+ if (priv->has_wep) {
+ err = __orinoco_hw_setup_wep(priv);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d activating WEP\n",
+ dev->name, err);
+ return err;
+ }
+ }
+
+ /* Set promiscuity / multicast*/
+ priv->promiscuous = 0;
+ priv->mc_count = 0;
+ __orinoco_set_multicast_list(dev); /* FIXME: what about the xmit_lock */
+
+ return 0;
+}
+
+/* FIXME: return int? */
+static void
+__orinoco_set_multicast_list(struct net_device *dev)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ hermes_t *hw = &priv->hw;
+ int err = 0;
+ int promisc, mc_count;
+
+ /* The Hermes doesn't seem to have an allmulti mode, so we go
+ * into promiscuous mode and let the upper levels deal. */
+ if ( (dev->flags & IFF_PROMISC) || (dev->flags & IFF_ALLMULTI) ||
+ (dev->mc_count > MAX_MULTICAST(priv)) ) {
+ promisc = 1;
+ mc_count = 0;
+ } else {
+ promisc = 0;
+ mc_count = dev->mc_count;
+ }
+
+ if (promisc != priv->promiscuous) {
+ err = hermes_write_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFPROMISCUOUSMODE,
+ promisc);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d setting PROMISCUOUSMODE to 1.\n",
+ dev->name, err);
+ } else
+ priv->promiscuous = promisc;
+ }
+
+ if (! promisc && (mc_count || priv->mc_count) ) {
+ struct dev_mc_list *p = dev->mc_list;
+ struct hermes_multicast mclist;
+ int i;
+
+ for (i = 0; i < mc_count; i++) {
+ /* paranoia: is list shorter than mc_count? */
+ BUG_ON(! p);
+ /* paranoia: bad address size in list? */
+ BUG_ON(p->dmi_addrlen != ETH_ALEN);
+
+ memcpy(mclist.addr[i], p->dmi_addr, ETH_ALEN);
+ p = p->next;
+ }
+
+ if (p)
+ printk(KERN_WARNING "%s: Multicast list is "
+ "longer than mc_count\n", dev->name);
+
+ err = hermes_write_ltv(hw, USER_BAP, HERMES_RID_CNFGROUPADDRESSES,
+ HERMES_BYTES_TO_RECLEN(priv->mc_count * ETH_ALEN),
+ &mclist);
+ if (err)
+ printk(KERN_ERR "%s: Error %d setting multicast list.\n",
+ dev->name, err);
+ else
+ priv->mc_count = mc_count;
+ }
+
+ /* Since we can set the promiscuous flag when it wasn't asked
+ for, make sure the net_device knows about it. */
+ if (priv->promiscuous)
+ dev->flags |= IFF_PROMISC;
+ else
+ dev->flags &= ~IFF_PROMISC;
+}
+
+static int orinoco_reconfigure(struct net_device *dev)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ struct hermes *hw = &priv->hw;
+ unsigned long flags;
+ int err = 0;
+
+ if (priv->broken_disableport) {
+ schedule_work(&priv->reset_work);
+ return 0;
+ }
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+
+ err = hermes_disable_port(hw, 0);
+ if (err) {
+ printk(KERN_WARNING "%s: Unable to disable port while reconfiguring card\n",
+ dev->name);
+ priv->broken_disableport = 1;
+ goto out;
+ }
+
+ err = __orinoco_program_rids(dev);
+ if (err) {
+ printk(KERN_WARNING "%s: Unable to reconfigure card\n",
+ dev->name);
+ goto out;
+ }
+
+ err = hermes_enable_port(hw, 0);
+ if (err) {
+ printk(KERN_WARNING "%s: Unable to enable port while reconfiguring card\n",
+ dev->name);
+ goto out;
+ }
+
+ out:
+ if (err) {
+ printk(KERN_WARNING "%s: Resetting instead...\n", dev->name);
+ schedule_work(&priv->reset_work);
+ err = 0;
+ }
+
+ orinoco_unlock(priv, &flags);
+ return err;
+
+}
+
+/* This must be called from user context, without locks held - use
+ * schedule_work() */
+static void orinoco_reset(struct net_device *dev)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ struct hermes *hw = &priv->hw;
+ int err = 0;
+ unsigned long flags;
+
+ if (orinoco_lock(priv, &flags) != 0)
+ /* When the hardware becomes available again, whatever
+ * detects that is responsible for re-initializing
+ * it. So no need for anything further */
+ return;
+
+ netif_stop_queue(dev);
+
+ /* Shut off interrupts. Depending on what state the hardware
+ * is in, this might not work, but we'll try anyway */
+ hermes_set_irqmask(hw, 0);
+ hermes_write_regn(hw, EVACK, 0xffff);
+
+ priv->hw_unavailable++;
+ priv->last_linkstatus = 0xffff; /* firmware will have to reassociate */
+ netif_carrier_off(dev);
+
+ orinoco_unlock(priv, &flags);
+
+ if (priv->hard_reset)
+ err = (*priv->hard_reset)(priv);
+ if (err) {
+ printk(KERN_ERR "%s: orinoco_reset: Error %d "
+ "performing hard reset\n", dev->name, err);
+ /* FIXME: shutdown of some sort */
+ return;
+ }
+
+ err = orinoco_reinit_firmware(dev);
+ if (err) {
+ printk(KERN_ERR "%s: orinoco_reset: Error %d re-initializing firmware\n",
+ dev->name, err);
+ return;
+ }
+
+ spin_lock_irq(&priv->lock); /* This has to be called from user context */
+
+ priv->hw_unavailable--;
+
+ /* priv->open or priv->hw_unavailable might have changed while
+ * we dropped the lock */
+ if (priv->open && (! priv->hw_unavailable)) {
+ err = __orinoco_up(dev);
+ if (err) {
+ printk(KERN_ERR "%s: orinoco_reset: Error %d reenabling card\n",
+ dev->name, err);
+ } else
+ dev->trans_start = jiffies;
+ }
+
+ spin_unlock_irq(&priv->lock);
+
+ return;
+}
+
+/********************************************************************/
+/* Interrupt handler */
+/********************************************************************/
+
+static void __orinoco_ev_tick(struct net_device *dev, hermes_t *hw)
+{
+ printk(KERN_DEBUG "%s: TICK\n", dev->name);
+}
+
+static void __orinoco_ev_wterr(struct net_device *dev, hermes_t *hw)
+{
+ /* This seems to happen a fair bit under load, but ignoring it
+ seems to work fine...*/
+ printk(KERN_DEBUG "%s: MAC controller error (WTERR). Ignoring.\n",
+ dev->name);
+}
+
+irqreturn_t orinoco_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct net_device *dev = (struct net_device *)dev_id;
+ struct orinoco_private *priv = netdev_priv(dev);
+ hermes_t *hw = &priv->hw;
+ int count = MAX_IRQLOOPS_PER_IRQ;
+ u16 evstat, events;
+ /* These are used to detect a runaway interrupt situation */
+ /* If we get more than MAX_IRQLOOPS_PER_JIFFY iterations in a jiffy,
+ * we panic and shut down the hardware */
+ static int last_irq_jiffy = 0; /* jiffies value the last time
+ * we were called */
+ static int loops_this_jiffy = 0;
+ unsigned long flags;
+
+ if (orinoco_lock(priv, &flags) != 0) {
+ /* If hw is unavailable - we don't know if the irq was
+ * for us or not */
+ return IRQ_HANDLED;
+ }
+
+ evstat = hermes_read_regn(hw, EVSTAT);
+ events = evstat & hw->inten;
+ if (! events) {
+ orinoco_unlock(priv, &flags);
+ return IRQ_NONE;
+ }
+
+ if (jiffies != last_irq_jiffy)
+ loops_this_jiffy = 0;
+ last_irq_jiffy = jiffies;
+
+ while (events && count--) {
+ if (++loops_this_jiffy > MAX_IRQLOOPS_PER_JIFFY) {
+ printk(KERN_WARNING "%s: IRQ handler is looping too "
+ "much! Resetting.\n", dev->name);
+ /* Disable interrupts for now */
+ hermes_set_irqmask(hw, 0);
+ schedule_work(&priv->reset_work);
+ break;
+ }
+
+ /* Check the card hasn't been removed */
+ if (! hermes_present(hw)) {
+ DEBUG(0, "orinoco_interrupt(): card removed\n");
+ break;
+ }
+
+ if (events & HERMES_EV_TICK)
+ __orinoco_ev_tick(dev, hw);
+ if (events & HERMES_EV_WTERR)
+ __orinoco_ev_wterr(dev, hw);
+ if (events & HERMES_EV_INFDROP)
+ __orinoco_ev_infdrop(dev, hw);
+ if (events & HERMES_EV_INFO)
+ __orinoco_ev_info(dev, hw);
+ if (events & HERMES_EV_RX)
+ __orinoco_ev_rx(dev, hw);
+ if (events & HERMES_EV_TXEXC)
+ __orinoco_ev_txexc(dev, hw);
+ if (events & HERMES_EV_TX)
+ __orinoco_ev_tx(dev, hw);
+ if (events & HERMES_EV_ALLOC)
+ __orinoco_ev_alloc(dev, hw);
+
+ hermes_write_regn(hw, EVACK, events);
+
+ evstat = hermes_read_regn(hw, EVSTAT);
+ events = evstat & hw->inten;
+ };
+
+ orinoco_unlock(priv, &flags);
+ return IRQ_HANDLED;
+}
+
+/********************************************************************/
+/* Initialization */
+/********************************************************************/
+
+struct comp_id {
+ u16 id, variant, major, minor;
+} __attribute__ ((packed));
+
+static inline fwtype_t determine_firmware_type(struct comp_id *nic_id)
+{
+ if (nic_id->id < 0x8000)
+ return FIRMWARE_TYPE_AGERE;
+ else if (nic_id->id == 0x8000 && nic_id->major == 0)
+ return FIRMWARE_TYPE_SYMBOL;
+ else
+ return FIRMWARE_TYPE_INTERSIL;
+}
+
+/* Set priv->firmware type, determine firmware properties */
+static int determine_firmware(struct net_device *dev)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ hermes_t *hw = &priv->hw;
+ int err;
+ struct comp_id nic_id, sta_id;
+ unsigned int firmver;
+ char tmp[SYMBOL_MAX_VER_LEN+1];
+
+ /* Get the hardware version */
+ err = HERMES_READ_RECORD(hw, USER_BAP, HERMES_RID_NICID, &nic_id);
+ if (err) {
+ printk(KERN_ERR "%s: Cannot read hardware identity: error %d\n",
+ dev->name, err);
+ return err;
+ }
+
+ le16_to_cpus(&nic_id.id);
+ le16_to_cpus(&nic_id.variant);
+ le16_to_cpus(&nic_id.major);
+ le16_to_cpus(&nic_id.minor);
+ printk(KERN_DEBUG "%s: Hardware identity %04x:%04x:%04x:%04x\n",
+ dev->name, nic_id.id, nic_id.variant,
+ nic_id.major, nic_id.minor);
+
+ priv->firmware_type = determine_firmware_type(&nic_id);
+
+ /* Get the firmware version */
+ err = HERMES_READ_RECORD(hw, USER_BAP, HERMES_RID_STAID, &sta_id);
+ if (err) {
+ printk(KERN_ERR "%s: Cannot read station identity: error %d\n",
+ dev->name, err);
+ return err;
+ }
+
+ le16_to_cpus(&sta_id.id);
+ le16_to_cpus(&sta_id.variant);
+ le16_to_cpus(&sta_id.major);
+ le16_to_cpus(&sta_id.minor);
+ printk(KERN_DEBUG "%s: Station identity %04x:%04x:%04x:%04x\n",
+ dev->name, sta_id.id, sta_id.variant,
+ sta_id.major, sta_id.minor);
+
+ switch (sta_id.id) {
+ case 0x15:
+ printk(KERN_ERR "%s: Primary firmware is active\n",
+ dev->name);
+ return -ENODEV;
+ case 0x14b:
+ printk(KERN_ERR "%s: Tertiary firmware is active\n",
+ dev->name);
+ return -ENODEV;
+ case 0x1f: /* Intersil, Agere, Symbol Spectrum24 */
+ case 0x21: /* Symbol Spectrum24 Trilogy */
+ break;
+ default:
+ printk(KERN_NOTICE "%s: Unknown station ID, please report\n",
+ dev->name);
+ break;
+ }
+
+ /* Default capabilities */
+ priv->has_sensitivity = 1;
+ priv->has_mwo = 0;
+ priv->has_preamble = 0;
+ priv->has_port3 = 1;
+ priv->has_ibss = 1;
+ priv->has_wep = 0;
+ priv->has_big_wep = 0;
+
+ /* Determine capabilities from the firmware version */
+ switch (priv->firmware_type) {
+ case FIRMWARE_TYPE_AGERE:
+ /* Lucent Wavelan IEEE, Lucent Orinoco, Cabletron RoamAbout,
+ ELSA, Melco, HP, IBM, Dell 1150, Compaq 110/210 */
+ snprintf(priv->fw_name, sizeof(priv->fw_name) - 1,
+ "Lucent/Agere %d.%02d", sta_id.major, sta_id.minor);
+
+ firmver = ((unsigned long)sta_id.major << 16) | sta_id.minor;
+
+ priv->has_ibss = (firmver >= 0x60006);
+ priv->has_wep = (firmver >= 0x40020);
+ priv->has_big_wep = 1; /* FIXME: this is wrong - how do we tell
+ Gold cards from the others? */
+ priv->has_mwo = (firmver >= 0x60000);
+ priv->has_pm = (firmver >= 0x40020); /* Don't work in 7.52 ? */
+ priv->ibss_port = 1;
+
+ /* Tested with Agere firmware :
+ * 1.16 ; 4.08 ; 4.52 ; 6.04 ; 6.16 ; 7.28 => Jean II
+ * Tested CableTron firmware : 4.32 => Anton */
+ break;
+ case FIRMWARE_TYPE_SYMBOL:
+ /* Symbol , 3Com AirConnect, Intel, Ericsson WLAN */
+ /* Intel MAC : 00:02:B3:* */
+ /* 3Com MAC : 00:50:DA:* */
+ memset(tmp, 0, sizeof(tmp));
+ /* Get the Symbol firmware version */
+ err = hermes_read_ltv(hw, USER_BAP,
+ HERMES_RID_SECONDARYVERSION_SYMBOL,
+ SYMBOL_MAX_VER_LEN, NULL, &tmp);
+ if (err) {
+ printk(KERN_WARNING
+ "%s: Error %d reading Symbol firmware info. Wildly guessing capabilities...\n",
+ dev->name, err);
+ firmver = 0;
+ tmp[0] = '\0';
+ } else {
+ /* The firmware revision is a string, the format is
+ * something like : "V2.20-01".
+ * Quick and dirty parsing... - Jean II
+ */
+ firmver = ((tmp[1] - '0') << 16) | ((tmp[3] - '0') << 12)
+ | ((tmp[4] - '0') << 8) | ((tmp[6] - '0') << 4)
+ | (tmp[7] - '0');
+
+ tmp[SYMBOL_MAX_VER_LEN] = '\0';
+ }
+
+ snprintf(priv->fw_name, sizeof(priv->fw_name) - 1,
+ "Symbol %s", tmp);
+
+ priv->has_ibss = (firmver >= 0x20000);
+ priv->has_wep = (firmver >= 0x15012);
+ priv->has_big_wep = (firmver >= 0x20000);
+ priv->has_pm = (firmver >= 0x20000 && firmver < 0x22000) ||
+ (firmver >= 0x29000 && firmver < 0x30000) ||
+ firmver >= 0x31000;
+ priv->has_preamble = (firmver >= 0x20000);
+ priv->ibss_port = 4;
+ /* Tested with Intel firmware : 0x20015 => Jean II */
+ /* Tested with 3Com firmware : 0x15012 & 0x22001 => Jean II */
+ break;
+ case FIRMWARE_TYPE_INTERSIL:
+ /* D-Link, Linksys, Adtron, ZoomAir, and many others...
+ * Samsung, Compaq 100/200 and Proxim are slightly
+ * different and less well tested */
+ /* D-Link MAC : 00:40:05:* */
+ /* Addtron MAC : 00:90:D1:* */
+ snprintf(priv->fw_name, sizeof(priv->fw_name) - 1,
+ "Intersil %d.%d.%d", sta_id.major, sta_id.minor,
+ sta_id.variant);
+
+ firmver = ((unsigned long)sta_id.major << 16) |
+ ((unsigned long)sta_id.minor << 8) | sta_id.variant;
+
+ priv->has_ibss = (firmver >= 0x000700); /* FIXME */
+ priv->has_big_wep = priv->has_wep = (firmver >= 0x000800);
+ priv->has_pm = (firmver >= 0x000700);
+
+ if (firmver >= 0x000800)
+ priv->ibss_port = 0;
+ else {
+ printk(KERN_NOTICE "%s: Intersil firmware earlier "
+ "than v0.8.x - several features not supported\n",
+ dev->name);
+ priv->ibss_port = 1;
+ }
+ break;
+ }
+ printk(KERN_DEBUG "%s: Firmware determined as %s\n", dev->name,
+ priv->fw_name);
+
+ return 0;
+}
+
+static int orinoco_init(struct net_device *dev)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ hermes_t *hw = &priv->hw;
+ int err = 0;
+ struct hermes_idstring nickbuf;
+ u16 reclen;
+ int len;
+
+ TRACE_ENTER(dev->name);
+
+ /* No need to lock, the hw_unavailable flag is already set in
+ * alloc_orinocodev() */
+ priv->nicbuf_size = IEEE802_11_FRAME_LEN + ETH_HLEN;
+
+ /* Initialize the firmware */
+ err = hermes_init(hw);
+ if (err != 0) {
+ printk(KERN_ERR "%s: failed to initialize firmware (err = %d)\n",
+ dev->name, err);
+ goto out;
+ }
+
+ err = determine_firmware(dev);
+ if (err != 0) {
+ printk(KERN_ERR "%s: Incompatible firmware, aborting\n",
+ dev->name);
+ goto out;
+ }
+
+ if (priv->has_port3)
+ printk(KERN_DEBUG "%s: Ad-hoc demo mode supported\n", dev->name);
+ if (priv->has_ibss)
+ printk(KERN_DEBUG "%s: IEEE standard IBSS ad-hoc mode supported\n",
+ dev->name);
+ if (priv->has_wep) {
+ printk(KERN_DEBUG "%s: WEP supported, ", dev->name);
+ if (priv->has_big_wep)
+ printk("104-bit key\n");
+ else
+ printk("40-bit key\n");
+ }
+
+ /* Get the MAC address */
+ err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CNFOWNMACADDR,
+ ETH_ALEN, NULL, dev->dev_addr);
+ if (err) {
+ printk(KERN_WARNING "%s: failed to read MAC address!\n",
+ dev->name);
+ goto out;
+ }
+
+ printk(KERN_DEBUG "%s: MAC address %02X:%02X:%02X:%02X:%02X:%02X\n",
+ dev->name, dev->dev_addr[0], dev->dev_addr[1],
+ dev->dev_addr[2], dev->dev_addr[3], dev->dev_addr[4],
+ dev->dev_addr[5]);
+
+ /* Get the station name */
+ err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CNFOWNNAME,
+ sizeof(nickbuf), &reclen, &nickbuf);
+ if (err) {
+ printk(KERN_ERR "%s: failed to read station name\n",
+ dev->name);
+ goto out;
+ }
+ if (nickbuf.len)
+ len = min(IW_ESSID_MAX_SIZE, (int)le16_to_cpu(nickbuf.len));
+ else
+ len = min(IW_ESSID_MAX_SIZE, 2 * reclen);
+ memcpy(priv->nick, &nickbuf.val, len);
+ priv->nick[len] = '\0';
+
+ printk(KERN_DEBUG "%s: Station name \"%s\"\n", dev->name, priv->nick);
+
+ /* Get allowed channels */
+ err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CHANNELLIST,
+ &priv->channel_mask);
+ if (err) {
+ printk(KERN_ERR "%s: failed to read channel list!\n",
+ dev->name);
+ goto out;
+ }
+
+ /* Get initial AP density */
+ err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFSYSTEMSCALE,
+ &priv->ap_density);
+ if (err || priv->ap_density < 1 || priv->ap_density > 3) {
+ priv->has_sensitivity = 0;
+ }
+
+ /* Get initial RTS threshold */
+ err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFRTSTHRESHOLD,
+ &priv->rts_thresh);
+ if (err) {
+ printk(KERN_ERR "%s: failed to read RTS threshold!\n",
+ dev->name);
+ goto out;
+ }
+
+ /* Get initial fragmentation settings */
+ if (priv->has_mwo)
+ err = hermes_read_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFMWOROBUST_AGERE,
+ &priv->mwo_robust);
+ else
+ err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFFRAGMENTATIONTHRESHOLD,
+ &priv->frag_thresh);
+ if (err) {
+ printk(KERN_ERR "%s: failed to read fragmentation settings!\n",
+ dev->name);
+ goto out;
+ }
+
+ /* Power management setup */
+ if (priv->has_pm) {
+ priv->pm_on = 0;
+ priv->pm_mcast = 1;
+ err = hermes_read_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFMAXSLEEPDURATION,
+ &priv->pm_period);
+ if (err) {
+ printk(KERN_ERR "%s: failed to read power management period!\n",
+ dev->name);
+ goto out;
+ }
+ err = hermes_read_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFPMHOLDOVERDURATION,
+ &priv->pm_timeout);
+ if (err) {
+ printk(KERN_ERR "%s: failed to read power management timeout!\n",
+ dev->name);
+ goto out;
+ }
+ }
+
+ /* Preamble setup */
+ if (priv->has_preamble) {
+ err = hermes_read_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFPREAMBLE_SYMBOL,
+ &priv->preamble);
+ if (err)
+ goto out;
+ }
+
+ /* Set up the default configuration */
+ priv->iw_mode = IW_MODE_INFRA;
+ /* By default use IEEE/IBSS ad-hoc mode if we have it */
+ priv->prefer_port3 = priv->has_port3 && (! priv->has_ibss);
+ set_port_type(priv);
+ priv->channel = 10; /* default channel, more-or-less arbitrary */
+
+ priv->promiscuous = 0;
+ priv->wep_on = 0;
+ priv->tx_key = 0;
+
+ err = hermes_allocate(hw, priv->nicbuf_size, &priv->txfid);
+ if (err == -EIO) {
+ /* Try workaround for old Symbol firmware bug */
+ printk(KERN_WARNING "%s: firmware ALLOC bug detected "
+ "(old Symbol firmware?). Trying to work around... ",
+ dev->name);
+
+ priv->nicbuf_size = TX_NICBUF_SIZE_BUG;
+ err = hermes_allocate(hw, priv->nicbuf_size, &priv->txfid);
+ if (err)
+ printk("failed!\n");
+ else
+ printk("ok.\n");
+ }
+ if (err) {
+ printk("%s: Error %d allocating Tx buffer\n", dev->name, err);
+ goto out;
+ }
+
+ /* Make the hardware available, as long as it hasn't been
+ * removed elsewhere (e.g. by PCMCIA hot unplug) */
+ spin_lock_irq(&priv->lock);
+ priv->hw_unavailable--;
+ spin_unlock_irq(&priv->lock);
+
+ printk(KERN_DEBUG "%s: ready\n", dev->name);
+
+ out:
+ TRACE_EXIT(dev->name);
+ return err;
+}
+
+struct net_device *alloc_orinocodev(int sizeof_card,
+ int (*hard_reset)(struct orinoco_private *))
+{
+ struct net_device *dev;
+ struct orinoco_private *priv;
+
+ dev = alloc_etherdev(sizeof(struct orinoco_private) + sizeof_card);
+ if (! dev)
+ return NULL;
+ priv = netdev_priv(dev);
+ priv->ndev = dev;
+ if (sizeof_card)
+ priv->card = (void *)((unsigned long)netdev_priv(dev)
+ + sizeof(struct orinoco_private));
+ else
+ priv->card = NULL;
+
+ /* Setup / override net_device fields */
+ dev->init = orinoco_init;
+ dev->hard_start_xmit = orinoco_xmit;
+ dev->tx_timeout = orinoco_tx_timeout;
+ dev->watchdog_timeo = HZ; /* 1 second timeout */
+ dev->get_stats = orinoco_get_stats;
+ dev->get_wireless_stats = orinoco_get_wireless_stats;
+ dev->do_ioctl = orinoco_ioctl;
+ dev->change_mtu = orinoco_change_mtu;
+ dev->set_multicast_list = orinoco_set_multicast_list;
+ /* we use the default eth_mac_addr for setting the MAC addr */
+
+ /* Set up default callbacks */
+ dev->open = orinoco_open;
+ dev->stop = orinoco_stop;
+ priv->hard_reset = hard_reset;
+
+ spin_lock_init(&priv->lock);
+ priv->open = 0;
+ priv->hw_unavailable = 1; /* orinoco_init() must clear this
+ * before anything else touches the
+ * hardware */
+ INIT_WORK(&priv->reset_work, (void (*)(void *))orinoco_reset, dev);
+
+ netif_carrier_off(dev);
+ priv->last_linkstatus = 0xffff;
+
+ return dev;
+
+}
+
+void free_orinocodev(struct net_device *dev)
+{
+ free_netdev(dev);
+}
+
+/********************************************************************/
+/* Wireless extensions */
+/********************************************************************/
+
+static int orinoco_hw_get_bssid(struct orinoco_private *priv,
+ char buf[ETH_ALEN])
+{
+ hermes_t *hw = &priv->hw;
+ int err = 0;
+ unsigned long flags;
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+
+ err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CURRENTBSSID,
+ ETH_ALEN, NULL, buf);
+
+ orinoco_unlock(priv, &flags);
+
+ return err;
+}
+
+static int orinoco_hw_get_essid(struct orinoco_private *priv, int *active,
+ char buf[IW_ESSID_MAX_SIZE+1])
+{
+ hermes_t *hw = &priv->hw;
+ int err = 0;
+ struct hermes_idstring essidbuf;
+ char *p = (char *)(&essidbuf.val);
+ int len;
+ unsigned long flags;
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+
+ if (strlen(priv->desired_essid) > 0) {
+ /* We read the desired SSID from the hardware rather
+ than from priv->desired_essid, just in case the
+ firmware is allowed to change it on us. I'm not
+ sure about this */
+ /* My guess is that the OWNSSID should always be whatever
+ * we set to the card, whereas CURRENT_SSID is the one that
+ * may change... - Jean II */
+ u16 rid;
+
+ *active = 1;
+
+ rid = (priv->port_type == 3) ? HERMES_RID_CNFOWNSSID :
+ HERMES_RID_CNFDESIREDSSID;
+
+ err = hermes_read_ltv(hw, USER_BAP, rid, sizeof(essidbuf),
+ NULL, &essidbuf);
+ if (err)
+ goto fail_unlock;
+ } else {
+ *active = 0;
+
+ err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_CURRENTSSID,
+ sizeof(essidbuf), NULL, &essidbuf);
+ if (err)
+ goto fail_unlock;
+ }
+
+ len = le16_to_cpu(essidbuf.len);
+
+ memset(buf, 0, IW_ESSID_MAX_SIZE+1);
+ memcpy(buf, p, len);
+ buf[len] = '\0';
+
+ fail_unlock:
+ orinoco_unlock(priv, &flags);
+
+ return err;
+}
+
+static long orinoco_hw_get_freq(struct orinoco_private *priv)
+{
+
+ hermes_t *hw = &priv->hw;
+ int err = 0;
+ u16 channel;
+ long freq = 0;
+ unsigned long flags;
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+
+ err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CURRENTCHANNEL, &channel);
+ if (err)
+ goto out;
+
+ /* Intersil firmware 1.3.5 returns 0 when the interface is down */
+ if (channel == 0) {
+ err = -EBUSY;
+ goto out;
+ }
+
+ if ( (channel < 1) || (channel > NUM_CHANNELS) ) {
+ printk(KERN_WARNING "%s: Channel out of range (%d)!\n",
+ priv->ndev->name, channel);
+ err = -EBUSY;
+ goto out;
+
+ }
+ freq = channel_frequency[channel-1] * 100000;
+
+ out:
+ orinoco_unlock(priv, &flags);
+
+ if (err > 0)
+ err = -EBUSY;
+ return err ? err : freq;
+}
+
+static int orinoco_hw_get_bitratelist(struct orinoco_private *priv,
+ int *numrates, s32 *rates, int max)
+{
+ hermes_t *hw = &priv->hw;
+ struct hermes_idstring list;
+ unsigned char *p = (unsigned char *)&list.val;
+ int err = 0;
+ int num;
+ int i;
+ unsigned long flags;
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+
+ err = hermes_read_ltv(hw, USER_BAP, HERMES_RID_SUPPORTEDDATARATES,
+ sizeof(list), NULL, &list);
+ orinoco_unlock(priv, &flags);
+
+ if (err)
+ return err;
+
+ num = le16_to_cpu(list.len);
+ *numrates = num;
+ num = min(num, max);
+
+ for (i = 0; i < num; i++) {
+ rates[i] = (p[i] & 0x7f) * 500000; /* convert to bps */
+ }
+
+ return 0;
+}
+
+static int orinoco_ioctl_getiwrange(struct net_device *dev, struct iw_point *rrq)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ int err = 0;
+ int mode;
+ struct iw_range range;
+ int numrates;
+ int i, k;
+ unsigned long flags;
+
+ TRACE_ENTER(dev->name);
+
+ if (!access_ok(VERIFY_WRITE, rrq->pointer, sizeof(range)))
+ return -EFAULT;
+
+ rrq->length = sizeof(range);
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+
+ mode = priv->iw_mode;
+ orinoco_unlock(priv, &flags);
+
+ memset(&range, 0, sizeof(range));
+
+ /* Much of this shamelessly taken from wvlan_cs.c. No idea
+ * what it all means -dgibson */
+ range.we_version_compiled = WIRELESS_EXT;
+ range.we_version_source = 11;
+
+ range.min_nwid = range.max_nwid = 0; /* We don't use nwids */
+
+ /* Set available channels/frequencies */
+ range.num_channels = NUM_CHANNELS;
+ k = 0;
+ for (i = 0; i < NUM_CHANNELS; i++) {
+ if (priv->channel_mask & (1 << i)) {
+ range.freq[k].i = i + 1;
+ range.freq[k].m = channel_frequency[i] * 100000;
+ range.freq[k].e = 1;
+ k++;
+ }
+
+ if (k >= IW_MAX_FREQUENCIES)
+ break;
+ }
+ range.num_frequency = k;
+
+ range.sensitivity = 3;
+
+ if ((mode == IW_MODE_ADHOC) && (priv->spy_number == 0)){
+ /* Quality stats meaningless in ad-hoc mode */
+ range.max_qual.qual = 0;
+ range.max_qual.level = 0;
+ range.max_qual.noise = 0;
+ range.avg_qual.qual = 0;
+ range.avg_qual.level = 0;
+ range.avg_qual.noise = 0;
+ } else {
+ range.max_qual.qual = 0x8b - 0x2f;
+ range.max_qual.level = 0x2f - 0x95 - 1;
+ range.max_qual.noise = 0x2f - 0x95 - 1;
+ /* Need to get better values */
+ range.avg_qual.qual = 0x24;
+ range.avg_qual.level = 0xC2;
+ range.avg_qual.noise = 0x9E;
+ }
+
+ err = orinoco_hw_get_bitratelist(priv, &numrates,
+ range.bitrate, IW_MAX_BITRATES);
+ if (err)
+ return err;
+ range.num_bitrates = numrates;
+
+ /* Set an indication of the max TCP throughput in bit/s that we can
+ * expect using this interface. May be use for QoS stuff...
+ * Jean II */
+ if(numrates > 2)
+ range.throughput = 5 * 1000 * 1000; /* ~5 Mb/s */
+ else
+ range.throughput = 1.5 * 1000 * 1000; /* ~1.5 Mb/s */
+
+ range.min_rts = 0;
+ range.max_rts = 2347;
+ range.min_frag = 256;
+ range.max_frag = 2346;
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+ if (priv->has_wep) {
+ range.max_encoding_tokens = ORINOCO_MAX_KEYS;
+
+ range.encoding_size[0] = SMALL_KEY_SIZE;
+ range.num_encoding_sizes = 1;
+
+ if (priv->has_big_wep) {
+ range.encoding_size[1] = LARGE_KEY_SIZE;
+ range.num_encoding_sizes = 2;
+ }
+ } else {
+ range.num_encoding_sizes = 0;
+ range.max_encoding_tokens = 0;
+ }
+ orinoco_unlock(priv, &flags);
+
+ range.min_pmp = 0;
+ range.max_pmp = 65535000;
+ range.min_pmt = 0;
+ range.max_pmt = 65535 * 1000; /* ??? */
+ range.pmp_flags = IW_POWER_PERIOD;
+ range.pmt_flags = IW_POWER_TIMEOUT;
+ range.pm_capa = IW_POWER_PERIOD | IW_POWER_TIMEOUT | IW_POWER_UNICAST_R;
+
+ range.num_txpower = 1;
+ range.txpower[0] = 15; /* 15dBm */
+ range.txpower_capa = IW_TXPOW_DBM;
+
+ range.retry_capa = IW_RETRY_LIMIT | IW_RETRY_LIFETIME;
+ range.retry_flags = IW_RETRY_LIMIT;
+ range.r_time_flags = IW_RETRY_LIFETIME;
+ range.min_retry = 0;
+ range.max_retry = 65535; /* ??? */
+ range.min_r_time = 0;
+ range.max_r_time = 65535 * 1000; /* ??? */
+
+ if (copy_to_user(rrq->pointer, &range, sizeof(range)))
+ return -EFAULT;
+
+ TRACE_EXIT(dev->name);
+
+ return 0;
+}
+
+static int orinoco_ioctl_setiwencode(struct net_device *dev, struct iw_point *erq)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ int index = (erq->flags & IW_ENCODE_INDEX) - 1;
+ int setindex = priv->tx_key;
+ int enable = priv->wep_on;
+ int restricted = priv->wep_restrict;
+ u16 xlen = 0;
+ int err = 0;
+ char keybuf[ORINOCO_MAX_KEY_SIZE];
+ unsigned long flags;
+
+ if (! priv->has_wep)
+ return -EOPNOTSUPP;
+
+ if (erq->pointer) {
+ /* We actually have a key to set - check its length */
+ if (erq->length > LARGE_KEY_SIZE)
+ return -E2BIG;
+
+ if ( (erq->length > SMALL_KEY_SIZE) && !priv->has_big_wep )
+ return -E2BIG;
+
+ if (copy_from_user(keybuf, erq->pointer, erq->length))
+ return -EFAULT;
+ }
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+
+ if (erq->pointer) {
+ if ((index < 0) || (index >= ORINOCO_MAX_KEYS))
+ index = priv->tx_key;
+
+ /* Adjust key length to a supported value */
+ if (erq->length > SMALL_KEY_SIZE) {
+ xlen = LARGE_KEY_SIZE;
+ } else if (erq->length > 0) {
+ xlen = SMALL_KEY_SIZE;
+ } else
+ xlen = 0;
+
+ /* Switch on WEP if off */
+ if ((!enable) && (xlen > 0)) {
+ setindex = index;
+ enable = 1;
+ }
+ } else {
+ /* Important note : if the user do "iwconfig eth0 enc off",
+ * we will arrive there with an index of -1. This is valid
+ * but need to be taken care off... Jean II */
+ if ((index < 0) || (index >= ORINOCO_MAX_KEYS)) {
+ if((index != -1) || (erq->flags == 0)) {
+ err = -EINVAL;
+ goto out;
+ }
+ } else {
+ /* Set the index : Check that the key is valid */
+ if(priv->keys[index].len == 0) {
+ err = -EINVAL;
+ goto out;
+ }
+ setindex = index;
+ }
+ }
+
+ if (erq->flags & IW_ENCODE_DISABLED)
+ enable = 0;
+ if (erq->flags & IW_ENCODE_OPEN)
+ restricted = 0;
+ if (erq->flags & IW_ENCODE_RESTRICTED)
+ restricted = 1;
+
+ if (erq->pointer) {
+ priv->keys[index].len = cpu_to_le16(xlen);
+ memset(priv->keys[index].data, 0,
+ sizeof(priv->keys[index].data));
+ memcpy(priv->keys[index].data, keybuf, erq->length);
+ }
+ priv->tx_key = setindex;
+
+ /* Try fast key change if connected and only keys are changed */
+ if (priv->wep_on && enable && (priv->wep_restrict == restricted) &&
+ netif_carrier_ok(dev)) {
+ err = __orinoco_hw_setup_wepkeys(priv);
+ /* No need to commit if successful */
+ goto out;
+ }
+
+ priv->wep_on = enable;
+ priv->wep_restrict = restricted;
+
+ out:
+ orinoco_unlock(priv, &flags);
+
+ return err;
+}
+
+static int orinoco_ioctl_getiwencode(struct net_device *dev, struct iw_point *erq)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ int index = (erq->flags & IW_ENCODE_INDEX) - 1;
+ u16 xlen = 0;
+ char keybuf[ORINOCO_MAX_KEY_SIZE];
+ unsigned long flags;
+
+ if (! priv->has_wep)
+ return -EOPNOTSUPP;
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+
+ if ((index < 0) || (index >= ORINOCO_MAX_KEYS))
+ index = priv->tx_key;
+
+ erq->flags = 0;
+ if (! priv->wep_on)
+ erq->flags |= IW_ENCODE_DISABLED;
+ erq->flags |= index + 1;
+
+ if (priv->wep_restrict)
+ erq->flags |= IW_ENCODE_RESTRICTED;
+ else
+ erq->flags |= IW_ENCODE_OPEN;
+
+ xlen = le16_to_cpu(priv->keys[index].len);
+
+ erq->length = xlen;
+
+ memcpy(keybuf, priv->keys[index].data, ORINOCO_MAX_KEY_SIZE);
+
+ orinoco_unlock(priv, &flags);
+
+ if (erq->pointer) {
+ if (copy_to_user(erq->pointer, keybuf, xlen))
+ return -EFAULT;
+ }
+
+ return 0;
+}
+
+static int orinoco_ioctl_setessid(struct net_device *dev, struct iw_point *erq)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ char essidbuf[IW_ESSID_MAX_SIZE+1];
+ unsigned long flags;
+
+ /* Note : ESSID is ignored in Ad-Hoc demo mode, but we can set it
+ * anyway... - Jean II */
+
+ memset(&essidbuf, 0, sizeof(essidbuf));
+
+ if (erq->flags) {
+ if (erq->length > IW_ESSID_MAX_SIZE)
+ return -E2BIG;
+
+ if (copy_from_user(&essidbuf, erq->pointer, erq->length))
+ return -EFAULT;
+
+ essidbuf[erq->length] = '\0';
+ }
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+
+ memcpy(priv->desired_essid, essidbuf, sizeof(priv->desired_essid));
+
+ orinoco_unlock(priv, &flags);
+
+ return 0;
+}
+
+static int orinoco_ioctl_getessid(struct net_device *dev, struct iw_point *erq)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ char essidbuf[IW_ESSID_MAX_SIZE+1];
+ int active;
+ int err = 0;
+ unsigned long flags;
+
+ TRACE_ENTER(dev->name);
+
+ if (netif_running(dev)) {
+ err = orinoco_hw_get_essid(priv, &active, essidbuf);
+ if (err)
+ return err;
+ } else {
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+ memcpy(essidbuf, priv->desired_essid, sizeof(essidbuf));
+ orinoco_unlock(priv, &flags);
+ }
+
+ erq->flags = 1;
+ erq->length = strlen(essidbuf) + 1;
+ if (erq->pointer)
+ if (copy_to_user(erq->pointer, essidbuf, erq->length))
+ return -EFAULT;
+
+ TRACE_EXIT(dev->name);
+
+ return 0;
+}
+
+static int orinoco_ioctl_setnick(struct net_device *dev, struct iw_point *nrq)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ char nickbuf[IW_ESSID_MAX_SIZE+1];
+ unsigned long flags;
+
+ if (nrq->length > IW_ESSID_MAX_SIZE)
+ return -E2BIG;
+
+ memset(nickbuf, 0, sizeof(nickbuf));
+
+ if (copy_from_user(nickbuf, nrq->pointer, nrq->length))
+ return -EFAULT;
+
+ nickbuf[nrq->length] = '\0';
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+
+ memcpy(priv->nick, nickbuf, sizeof(priv->nick));
+
+ orinoco_unlock(priv, &flags);
+
+ return 0;
+}
+
+static int orinoco_ioctl_getnick(struct net_device *dev, struct iw_point *nrq)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ char nickbuf[IW_ESSID_MAX_SIZE+1];
+ unsigned long flags;
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+
+ memcpy(nickbuf, priv->nick, IW_ESSID_MAX_SIZE+1);
+ orinoco_unlock(priv, &flags);
+
+ nrq->length = strlen(nickbuf)+1;
+
+ if (copy_to_user(nrq->pointer, nickbuf, sizeof(nickbuf)))
+ return -EFAULT;
+
+ return 0;
+}
+
+static int orinoco_ioctl_setfreq(struct net_device *dev, struct iw_freq *frq)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ int chan = -1;
+ unsigned long flags;
+
+ /* We can only use this in Ad-Hoc demo mode to set the operating
+ * frequency, or in IBSS mode to set the frequency where the IBSS
+ * will be created - Jean II */
+ if (priv->iw_mode != IW_MODE_ADHOC)
+ return -EOPNOTSUPP;
+
+ if ( (frq->e == 0) && (frq->m <= 1000) ) {
+ /* Setting by channel number */
+ chan = frq->m;
+ } else {
+ /* Setting by frequency - search the table */
+ int mult = 1;
+ int i;
+
+ for (i = 0; i < (6 - frq->e); i++)
+ mult *= 10;
+
+ for (i = 0; i < NUM_CHANNELS; i++)
+ if (frq->m == (channel_frequency[i] * mult))
+ chan = i+1;
+ }
+
+ if ( (chan < 1) || (chan > NUM_CHANNELS) ||
+ ! (priv->channel_mask & (1 << (chan-1)) ) )
+ return -EINVAL;
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+ priv->channel = chan;
+ orinoco_unlock(priv, &flags);
+
+ return 0;
+}
+
+static int orinoco_ioctl_getsens(struct net_device *dev, struct iw_param *srq)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ hermes_t *hw = &priv->hw;
+ u16 val;
+ int err;
+ unsigned long flags;
+
+ if (!priv->has_sensitivity)
+ return -EOPNOTSUPP;
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+ err = hermes_read_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFSYSTEMSCALE, &val);
+ orinoco_unlock(priv, &flags);
+
+ if (err)
+ return err;
+
+ srq->value = val;
+ srq->fixed = 0; /* auto */
+
+ return 0;
+}
+
+static int orinoco_ioctl_setsens(struct net_device *dev, struct iw_param *srq)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ int val = srq->value;
+ unsigned long flags;
+
+ if (!priv->has_sensitivity)
+ return -EOPNOTSUPP;
+
+ if ((val < 1) || (val > 3))
+ return -EINVAL;
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+ priv->ap_density = val;
+ orinoco_unlock(priv, &flags);
+
+ return 0;
+}
+
+static int orinoco_ioctl_setrts(struct net_device *dev, struct iw_param *rrq)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ int val = rrq->value;
+ unsigned long flags;
+
+ if (rrq->disabled)
+ val = 2347;
+
+ if ( (val < 0) || (val > 2347) )
+ return -EINVAL;
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+
+ priv->rts_thresh = val;
+ orinoco_unlock(priv, &flags);
+
+ return 0;
+}
+
+static int orinoco_ioctl_setfrag(struct net_device *dev, struct iw_param *frq)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ int err = 0;
+ unsigned long flags;
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+
+ if (priv->has_mwo) {
+ if (frq->disabled)
+ priv->mwo_robust = 0;
+ else {
+ if (frq->fixed)
+ printk(KERN_WARNING "%s: Fixed fragmentation is "
+ "not supported on this firmware. "
+ "Using MWO robust instead.\n", dev->name);
+ priv->mwo_robust = 1;
+ }
+ } else {
+ if (frq->disabled)
+ priv->frag_thresh = 2346;
+ else {
+ if ( (frq->value < 256) || (frq->value > 2346) )
+ err = -EINVAL;
+ else
+ priv->frag_thresh = frq->value & ~0x1; /* must be even */
+ }
+ }
+
+ orinoco_unlock(priv, &flags);
+
+ return err;
+}
+
+static int orinoco_ioctl_getfrag(struct net_device *dev, struct iw_param *frq)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ hermes_t *hw = &priv->hw;
+ int err = 0;
+ u16 val;
+ unsigned long flags;
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+
+ if (priv->has_mwo) {
+ err = hermes_read_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFMWOROBUST_AGERE,
+ &val);
+ if (err)
+ val = 0;
+
+ frq->value = val ? 2347 : 0;
+ frq->disabled = ! val;
+ frq->fixed = 0;
+ } else {
+ err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFFRAGMENTATIONTHRESHOLD,
+ &val);
+ if (err)
+ val = 0;
+
+ frq->value = val;
+ frq->disabled = (val >= 2346);
+ frq->fixed = 1;
+ }
+
+ orinoco_unlock(priv, &flags);
+
+ return err;
+}
+
+static int orinoco_ioctl_setrate(struct net_device *dev, struct iw_param *rrq)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ int err = 0;
+ int ratemode = -1;
+ int bitrate; /* 100s of kilobits */
+ int i;
+ unsigned long flags;
+
+ /* As the user space doesn't know our highest rate, it uses -1
+ * to ask us to set the highest rate. Test it using "iwconfig
+ * ethX rate auto" - Jean II */
+ if (rrq->value == -1)
+ bitrate = 110;
+ else {
+ if (rrq->value % 100000)
+ return -EINVAL;
+ bitrate = rrq->value / 100000;
+ }
+
+ if ( (bitrate != 10) && (bitrate != 20) &&
+ (bitrate != 55) && (bitrate != 110) )
+ return -EINVAL;
+
+ for (i = 0; i < BITRATE_TABLE_SIZE; i++)
+ if ( (bitrate_table[i].bitrate == bitrate) &&
+ (bitrate_table[i].automatic == ! rrq->fixed) ) {
+ ratemode = i;
+ break;
+ }
+
+ if (ratemode == -1)
+ return -EINVAL;
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+ priv->bitratemode = ratemode;
+ orinoco_unlock(priv, &flags);
+
+ return err;
+}
+
+static int orinoco_ioctl_getrate(struct net_device *dev, struct iw_param *rrq)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ hermes_t *hw = &priv->hw;
+ int err = 0;
+ int ratemode;
+ int i;
+ u16 val;
+ unsigned long flags;
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+
+ ratemode = priv->bitratemode;
+
+ BUG_ON((ratemode < 0) || (ratemode >= BITRATE_TABLE_SIZE));
+
+ rrq->value = bitrate_table[ratemode].bitrate * 100000;
+ rrq->fixed = ! bitrate_table[ratemode].automatic;
+ rrq->disabled = 0;
+
+ /* If the interface is running we try to find more about the
+ current mode */
+ if (netif_running(dev)) {
+ err = hermes_read_wordrec(hw, USER_BAP,
+ HERMES_RID_CURRENTTXRATE, &val);
+ if (err)
+ goto out;
+
+ switch (priv->firmware_type) {
+ case FIRMWARE_TYPE_AGERE: /* Lucent style rate */
+ /* Note : in Lucent firmware, the return value of
+ * HERMES_RID_CURRENTTXRATE is the bitrate in Mb/s,
+ * and therefore is totally different from the
+ * encoding of HERMES_RID_CNFTXRATECONTROL.
+ * Don't forget that 6Mb/s is really 5.5Mb/s */
+ if (val == 6)
+ rrq->value = 5500000;
+ else
+ rrq->value = val * 1000000;
+ break;
+ case FIRMWARE_TYPE_INTERSIL: /* Intersil style rate */
+ case FIRMWARE_TYPE_SYMBOL: /* Symbol style rate */
+ for (i = 0; i < BITRATE_TABLE_SIZE; i++)
+ if (bitrate_table[i].intersil_txratectrl == val) {
+ ratemode = i;
+ break;
+ }
+ if (i >= BITRATE_TABLE_SIZE)
+ printk(KERN_INFO "%s: Unable to determine current bitrate (0x%04hx)\n",
+ dev->name, val);
+
+ rrq->value = bitrate_table[ratemode].bitrate * 100000;
+ break;
+ default:
+ BUG();
+ }
+ }
+
+ out:
+ orinoco_unlock(priv, &flags);
+
+ return err;
+}
+
+static int orinoco_ioctl_setpower(struct net_device *dev, struct iw_param *prq)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ int err = 0;
+ unsigned long flags;
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+
+ if (prq->disabled) {
+ priv->pm_on = 0;
+ } else {
+ switch (prq->flags & IW_POWER_MODE) {
+ case IW_POWER_UNICAST_R:
+ priv->pm_mcast = 0;
+ priv->pm_on = 1;
+ break;
+ case IW_POWER_ALL_R:
+ priv->pm_mcast = 1;
+ priv->pm_on = 1;
+ break;
+ case IW_POWER_ON:
+ /* No flags : but we may have a value - Jean II */
+ break;
+ default:
+ err = -EINVAL;
+ }
+ if (err)
+ goto out;
+
+ if (prq->flags & IW_POWER_TIMEOUT) {
+ priv->pm_on = 1;
+ priv->pm_timeout = prq->value / 1000;
+ }
+ if (prq->flags & IW_POWER_PERIOD) {
+ priv->pm_on = 1;
+ priv->pm_period = prq->value / 1000;
+ }
+ /* It's valid to not have a value if we are just toggling
+ * the flags... Jean II */
+ if(!priv->pm_on) {
+ err = -EINVAL;
+ goto out;
+ }
+ }
+
+ out:
+ orinoco_unlock(priv, &flags);
+
+ return err;
+}
+
+static int orinoco_ioctl_getpower(struct net_device *dev, struct iw_param *prq)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ hermes_t *hw = &priv->hw;
+ int err = 0;
+ u16 enable, period, timeout, mcast;
+ unsigned long flags;
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+
+ err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFPMENABLED, &enable);
+ if (err)
+ goto out;
+
+ err = hermes_read_wordrec(hw, USER_BAP,
+ HERMES_RID_CNFMAXSLEEPDURATION, &period);
+ if (err)
+ goto out;
+
+ err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFPMHOLDOVERDURATION, &timeout);
+ if (err)
+ goto out;
+
+ err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_CNFMULTICASTRECEIVE, &mcast);
+ if (err)
+ goto out;
+
+ prq->disabled = !enable;
+ /* Note : by default, display the period */
+ if ((prq->flags & IW_POWER_TYPE) == IW_POWER_TIMEOUT) {
+ prq->flags = IW_POWER_TIMEOUT;
+ prq->value = timeout * 1000;
+ } else {
+ prq->flags = IW_POWER_PERIOD;
+ prq->value = period * 1000;
+ }
+ if (mcast)
+ prq->flags |= IW_POWER_ALL_R;
+ else
+ prq->flags |= IW_POWER_UNICAST_R;
+
+ out:
+ orinoco_unlock(priv, &flags);
+
+ return err;
+}
+
+static int orinoco_ioctl_getretry(struct net_device *dev, struct iw_param *rrq)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ hermes_t *hw = &priv->hw;
+ int err = 0;
+ u16 short_limit, long_limit, lifetime;
+ unsigned long flags;
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+
+ err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_SHORTRETRYLIMIT,
+ &short_limit);
+ if (err)
+ goto out;
+
+ err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_LONGRETRYLIMIT,
+ &long_limit);
+ if (err)
+ goto out;
+
+ err = hermes_read_wordrec(hw, USER_BAP, HERMES_RID_MAXTRANSMITLIFETIME,
+ &lifetime);
+ if (err)
+ goto out;
+
+ rrq->disabled = 0; /* Can't be disabled */
+
+ /* Note : by default, display the retry number */
+ if ((rrq->flags & IW_RETRY_TYPE) == IW_RETRY_LIFETIME) {
+ rrq->flags = IW_RETRY_LIFETIME;
+ rrq->value = lifetime * 1000; /* ??? */
+ } else {
+ /* By default, display the min number */
+ if ((rrq->flags & IW_RETRY_MAX)) {
+ rrq->flags = IW_RETRY_LIMIT | IW_RETRY_MAX;
+ rrq->value = long_limit;
+ } else {
+ rrq->flags = IW_RETRY_LIMIT;
+ rrq->value = short_limit;
+ if(short_limit != long_limit)
+ rrq->flags |= IW_RETRY_MIN;
+ }
+ }
+
+ out:
+ orinoco_unlock(priv, &flags);
+
+ return err;
+}
+
+static int orinoco_ioctl_setibssport(struct net_device *dev, struct iwreq *wrq)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ int val = *( (int *) wrq->u.name );
+ unsigned long flags;
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+
+ priv->ibss_port = val ;
+
+ /* Actually update the mode we are using */
+ set_port_type(priv);
+
+ orinoco_unlock(priv, &flags);
+ return 0;
+}
+
+static int orinoco_ioctl_getibssport(struct net_device *dev, struct iwreq *wrq)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ int *val = (int *)wrq->u.name;
+ unsigned long flags;
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+
+ *val = priv->ibss_port;
+ orinoco_unlock(priv, &flags);
+
+ return 0;
+}
+
+static int orinoco_ioctl_setport3(struct net_device *dev, struct iwreq *wrq)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ int val = *( (int *) wrq->u.name );
+ int err = 0;
+ unsigned long flags;
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+
+ switch (val) {
+ case 0: /* Try to do IEEE ad-hoc mode */
+ if (! priv->has_ibss) {
+ err = -EINVAL;
+ break;
+ }
+ priv->prefer_port3 = 0;
+
+ break;
+
+ case 1: /* Try to do Lucent proprietary ad-hoc mode */
+ if (! priv->has_port3) {
+ err = -EINVAL;
+ break;
+ }
+ priv->prefer_port3 = 1;
+ break;
+
+ default:
+ err = -EINVAL;
+ }
+
+ if (! err)
+ /* Actually update the mode we are using */
+ set_port_type(priv);
+
+ orinoco_unlock(priv, &flags);
+
+ return err;
+}
+
+static int orinoco_ioctl_getport3(struct net_device *dev, struct iwreq *wrq)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ int *val = (int *)wrq->u.name;
+ unsigned long flags;
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+
+ *val = priv->prefer_port3;
+ orinoco_unlock(priv, &flags);
+ return 0;
+}
+
+/* Spy is used for link quality/strength measurements in Ad-Hoc mode
+ * Jean II */
+static int orinoco_ioctl_setspy(struct net_device *dev, struct iw_point *srq)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ struct sockaddr address[IW_MAX_SPY];
+ int number = srq->length;
+ int i;
+ int err = 0;
+ unsigned long flags;
+
+ /* Check the number of addresses */
+ if (number > IW_MAX_SPY)
+ return -E2BIG;
+
+ /* Get the data in the driver */
+ if (srq->pointer) {
+ if (copy_from_user(address, srq->pointer,
+ sizeof(struct sockaddr) * number))
+ return -EFAULT;
+ }
+
+ /* Make sure nobody mess with the structure while we do */
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+
+ /* orinoco_lock() doesn't disable interrupts, so make sure the
+ * interrupt rx path don't get confused while we copy */
+ priv->spy_number = 0;
+
+ if (number > 0) {
+ /* Extract the addresses */
+ for (i = 0; i < number; i++)
+ memcpy(priv->spy_address[i], address[i].sa_data,
+ ETH_ALEN);
+ /* Reset stats */
+ memset(priv->spy_stat, 0,
+ sizeof(struct iw_quality) * IW_MAX_SPY);
+ /* Set number of addresses */
+ priv->spy_number = number;
+ }
+
+ /* Now, let the others play */
+ orinoco_unlock(priv, &flags);
+
+ return err;
+}
+
+static int orinoco_ioctl_getspy(struct net_device *dev, struct iw_point *srq)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ struct sockaddr address[IW_MAX_SPY];
+ struct iw_quality spy_stat[IW_MAX_SPY];
+ int number;
+ int i;
+ unsigned long flags;
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+
+ number = priv->spy_number;
+ if ((number > 0) && (srq->pointer)) {
+ /* Create address struct */
+ for (i = 0; i < number; i++) {
+ memcpy(address[i].sa_data, priv->spy_address[i],
+ ETH_ALEN);
+ address[i].sa_family = AF_UNIX;
+ }
+ /* Copy stats */
+ /* In theory, we should disable irqs while copying the stats
+ * because the rx path might update it in the middle...
+ * Bah, who care ? - Jean II */
+ memcpy(&spy_stat, priv->spy_stat,
+ sizeof(struct iw_quality) * IW_MAX_SPY);
+ for (i=0; i < number; i++)
+ priv->spy_stat[i].updated = 0;
+ }
+
+ orinoco_unlock(priv, &flags);
+
+ /* Push stuff to user space */
+ srq->length = number;
+ if(copy_to_user(srq->pointer, address,
+ sizeof(struct sockaddr) * number))
+ return -EFAULT;
+ if(copy_to_user(srq->pointer + (sizeof(struct sockaddr)*number),
+ &spy_stat, sizeof(struct iw_quality) * number))
+ return -EFAULT;
+
+ return 0;
+}
+
+static int
+orinoco_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ struct iwreq *wrq = (struct iwreq *)rq;
+ int err = 0;
+ int tmp;
+ int changed = 0;
+ unsigned long flags;
+
+ TRACE_ENTER(dev->name);
+
+ /* In theory, we could allow most of the the SET stuff to be
+ * done. In practice, the lapse of time at startup when the
+ * card is not ready is very short, so why bother... Note
+ * that netif_device_present is different from up/down
+ * (ifconfig), when the device is not yet up, it is usually
+ * already ready... Jean II */
+ if (! netif_device_present(dev))
+ return -ENODEV;
+
+ switch (cmd) {
+ case SIOCGIWNAME:
+ strcpy(wrq->u.name, "IEEE 802.11-DS");
+ break;
+
+ case SIOCGIWAP:
+ wrq->u.ap_addr.sa_family = ARPHRD_ETHER;
+ err = orinoco_hw_get_bssid(priv, wrq->u.ap_addr.sa_data);
+ break;
+
+ case SIOCGIWRANGE:
+ err = orinoco_ioctl_getiwrange(dev, &wrq->u.data);
+ break;
+
+ case SIOCSIWMODE:
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+ switch (wrq->u.mode) {
+ case IW_MODE_ADHOC:
+ if (! (priv->has_ibss || priv->has_port3) )
+ err = -EINVAL;
+ else {
+ priv->iw_mode = IW_MODE_ADHOC;
+ changed = 1;
+ }
+ break;
+
+ case IW_MODE_INFRA:
+ priv->iw_mode = IW_MODE_INFRA;
+ changed = 1;
+ break;
+
+ default:
+ err = -EINVAL;
+ break;
+ }
+ set_port_type(priv);
+ orinoco_unlock(priv, &flags);
+ break;
+
+ case SIOCGIWMODE:
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+ wrq->u.mode = priv->iw_mode;
+ orinoco_unlock(priv, &flags);
+ break;
+
+ case SIOCSIWENCODE:
+ err = orinoco_ioctl_setiwencode(dev, &wrq->u.encoding);
+ if (! err)
+ changed = 1;
+ break;
+
+ case SIOCGIWENCODE:
+ if (! capable(CAP_NET_ADMIN)) {
+ err = -EPERM;
+ break;
+ }
+
+ err = orinoco_ioctl_getiwencode(dev, &wrq->u.encoding);
+ break;
+
+ case SIOCSIWESSID:
+ err = orinoco_ioctl_setessid(dev, &wrq->u.essid);
+ if (! err)
+ changed = 1;
+ break;
+
+ case SIOCGIWESSID:
+ err = orinoco_ioctl_getessid(dev, &wrq->u.essid);
+ break;
+
+ case SIOCSIWNICKN:
+ err = orinoco_ioctl_setnick(dev, &wrq->u.data);
+ if (! err)
+ changed = 1;
+ break;
+
+ case SIOCGIWNICKN:
+ err = orinoco_ioctl_getnick(dev, &wrq->u.data);
+ break;
+
+ case SIOCGIWFREQ:
+ tmp = orinoco_hw_get_freq(priv);
+ if (tmp < 0) {
+ err = tmp;
+ } else {
+ wrq->u.freq.m = tmp;
+ wrq->u.freq.e = 1;
+ }
+ break;
+
+ case SIOCSIWFREQ:
+ err = orinoco_ioctl_setfreq(dev, &wrq->u.freq);
+ if (! err)
+ changed = 1;
+ break;
+
+ case SIOCGIWSENS:
+ err = orinoco_ioctl_getsens(dev, &wrq->u.sens);
+ break;
+
+ case SIOCSIWSENS:
+ err = orinoco_ioctl_setsens(dev, &wrq->u.sens);
+ if (! err)
+ changed = 1;
+ break;
+
+ case SIOCGIWRTS:
+ wrq->u.rts.value = priv->rts_thresh;
+ wrq->u.rts.disabled = (wrq->u.rts.value == 2347);
+ wrq->u.rts.fixed = 1;
+ break;
+
+ case SIOCSIWRTS:
+ err = orinoco_ioctl_setrts(dev, &wrq->u.rts);
+ if (! err)
+ changed = 1;
+ break;
+
+ case SIOCSIWFRAG:
+ err = orinoco_ioctl_setfrag(dev, &wrq->u.frag);
+ if (! err)
+ changed = 1;
+ break;
+
+ case SIOCGIWFRAG:
+ err = orinoco_ioctl_getfrag(dev, &wrq->u.frag);
+ break;
+
+ case SIOCSIWRATE:
+ err = orinoco_ioctl_setrate(dev, &wrq->u.bitrate);
+ if (! err)
+ changed = 1;
+ break;
+
+ case SIOCGIWRATE:
+ err = orinoco_ioctl_getrate(dev, &wrq->u.bitrate);
+ break;
+
+ case SIOCSIWPOWER:
+ err = orinoco_ioctl_setpower(dev, &wrq->u.power);
+ if (! err)
+ changed = 1;
+ break;
+
+ case SIOCGIWPOWER:
+ err = orinoco_ioctl_getpower(dev, &wrq->u.power);
+ break;
+
+ case SIOCGIWTXPOW:
+ /* The card only supports one tx power, so this is easy */
+ wrq->u.txpower.value = 15; /* dBm */
+ wrq->u.txpower.fixed = 1;
+ wrq->u.txpower.disabled = 0;
+ wrq->u.txpower.flags = IW_TXPOW_DBM;
+ break;
+
+ case SIOCSIWRETRY:
+ err = -EOPNOTSUPP;
+ break;
+
+ case SIOCGIWRETRY:
+ err = orinoco_ioctl_getretry(dev, &wrq->u.retry);
+ break;
+
+ case SIOCSIWSPY:
+ err = orinoco_ioctl_setspy(dev, &wrq->u.data);
+ break;
+
+ case SIOCGIWSPY:
+ err = orinoco_ioctl_getspy(dev, &wrq->u.data);
+ break;
+
+ case SIOCGIWPRIV:
+ if (wrq->u.data.pointer) {
+ struct iw_priv_args privtab[] = {
+ { SIOCIWFIRSTPRIV + 0x0, 0, 0, "force_reset" },
+ { SIOCIWFIRSTPRIV + 0x1, 0, 0, "card_reset" },
+ { SIOCIWFIRSTPRIV + 0x2,
+ IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
+ 0, "set_port3" },
+ { SIOCIWFIRSTPRIV + 0x3, 0,
+ IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
+ "get_port3" },
+ { SIOCIWFIRSTPRIV + 0x4,
+ IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
+ 0, "set_preamble" },
+ { SIOCIWFIRSTPRIV + 0x5, 0,
+ IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
+ "get_preamble" },
+ { SIOCIWFIRSTPRIV + 0x6,
+ IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
+ 0, "set_ibssport" },
+ { SIOCIWFIRSTPRIV + 0x7, 0,
+ IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
+ "get_ibssport" },
+ { SIOCIWLASTPRIV, 0, 0, "dump_recs" },
+ };
+
+ wrq->u.data.length = sizeof(privtab) / sizeof(privtab[0]);
+ if (copy_to_user(wrq->u.data.pointer, privtab, sizeof(privtab)))
+ err = -EFAULT;
+ }
+ break;
+
+ case SIOCIWFIRSTPRIV + 0x0: /* force_reset */
+ case SIOCIWFIRSTPRIV + 0x1: /* card_reset */
+ if (! capable(CAP_NET_ADMIN)) {
+ err = -EPERM;
+ break;
+ }
+
+ printk(KERN_DEBUG "%s: Force scheduling reset!\n", dev->name);
+
+ schedule_work(&priv->reset_work);
+ break;
+
+ case SIOCIWFIRSTPRIV + 0x2: /* set_port3 */
+ if (! capable(CAP_NET_ADMIN)) {
+ err = -EPERM;
+ break;
+ }
+
+ err = orinoco_ioctl_setport3(dev, wrq);
+ if (! err)
+ changed = 1;
+ break;
+
+ case SIOCIWFIRSTPRIV + 0x3: /* get_port3 */
+ err = orinoco_ioctl_getport3(dev, wrq);
+ break;
+
+ case SIOCIWFIRSTPRIV + 0x4: /* set_preamble */
+ if (! capable(CAP_NET_ADMIN)) {
+ err = -EPERM;
+ break;
+ }
+
+ /* 802.11b has recently defined some short preamble.
+ * Basically, the Phy header has been reduced in size.
+ * This increase performance, especially at high rates
+ * (the preamble is transmitted at 1Mb/s), unfortunately
+ * this give compatibility troubles... - Jean II */
+ if(priv->has_preamble) {
+ int val = *( (int *) wrq->u.name );
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+ if (val)
+ priv->preamble = 1;
+ else
+ priv->preamble = 0;
+ orinoco_unlock(priv, &flags);
+ changed = 1;
+ } else
+ err = -EOPNOTSUPP;
+ break;
+
+ case SIOCIWFIRSTPRIV + 0x5: /* get_preamble */
+ if(priv->has_preamble) {
+ int *val = (int *)wrq->u.name;
+
+ if (orinoco_lock(priv, &flags) != 0)
+ return -EBUSY;
+ *val = priv->preamble;
+ orinoco_unlock(priv, &flags);
+ } else
+ err = -EOPNOTSUPP;
+ break;
+ case SIOCIWFIRSTPRIV + 0x6: /* set_ibssport */
+ if (! capable(CAP_NET_ADMIN)) {
+ err = -EPERM;
+ break;
+ }
+
+ err = orinoco_ioctl_setibssport(dev, wrq);
+ if (! err)
+ changed = 1;
+ break;
+
+ case SIOCIWFIRSTPRIV + 0x7: /* get_ibssport */
+ err = orinoco_ioctl_getibssport(dev, wrq);
+ break;
+
+ case SIOCIWLASTPRIV:
+ err = orinoco_debug_dump_recs(dev);
+ if (err)
+ printk(KERN_ERR "%s: Unable to dump records (%d)\n",
+ dev->name, err);
+ break;
+
+
+ default:
+ err = -EOPNOTSUPP;
+ }
+
+ if (! err && changed && netif_running(dev)) {
+ err = orinoco_reconfigure(dev);
+ }
+
+ TRACE_EXIT(dev->name);
+
+ return err;
+}
+
+struct {
+ u16 rid;
+ char *name;
+ int displaytype;
+#define DISPLAY_WORDS 0
+#define DISPLAY_BYTES 1
+#define DISPLAY_STRING 2
+#define DISPLAY_XSTRING 3
+} record_table[] = {
+#define DEBUG_REC(name,type) { HERMES_RID_##name, #name, DISPLAY_##type }
+ DEBUG_REC(CNFPORTTYPE,WORDS),
+ DEBUG_REC(CNFOWNMACADDR,BYTES),
+ DEBUG_REC(CNFDESIREDSSID,STRING),
+ DEBUG_REC(CNFOWNCHANNEL,WORDS),
+ DEBUG_REC(CNFOWNSSID,STRING),
+ DEBUG_REC(CNFOWNATIMWINDOW,WORDS),
+ DEBUG_REC(CNFSYSTEMSCALE,WORDS),
+ DEBUG_REC(CNFMAXDATALEN,WORDS),
+ DEBUG_REC(CNFPMENABLED,WORDS),
+ DEBUG_REC(CNFPMEPS,WORDS),
+ DEBUG_REC(CNFMULTICASTRECEIVE,WORDS),
+ DEBUG_REC(CNFMAXSLEEPDURATION,WORDS),
+ DEBUG_REC(CNFPMHOLDOVERDURATION,WORDS),
+ DEBUG_REC(CNFOWNNAME,STRING),
+ DEBUG_REC(CNFOWNDTIMPERIOD,WORDS),
+ DEBUG_REC(CNFMULTICASTPMBUFFERING,WORDS),
+ DEBUG_REC(CNFWEPENABLED_AGERE,WORDS),
+ DEBUG_REC(CNFMANDATORYBSSID_SYMBOL,WORDS),
+ DEBUG_REC(CNFWEPDEFAULTKEYID,WORDS),
+ DEBUG_REC(CNFDEFAULTKEY0,BYTES),
+ DEBUG_REC(CNFDEFAULTKEY1,BYTES),
+ DEBUG_REC(CNFMWOROBUST_AGERE,WORDS),
+ DEBUG_REC(CNFDEFAULTKEY2,BYTES),
+ DEBUG_REC(CNFDEFAULTKEY3,BYTES),
+ DEBUG_REC(CNFWEPFLAGS_INTERSIL,WORDS),
+ DEBUG_REC(CNFWEPKEYMAPPINGTABLE,WORDS),
+ DEBUG_REC(CNFAUTHENTICATION,WORDS),
+ DEBUG_REC(CNFMAXASSOCSTA,WORDS),
+ DEBUG_REC(CNFKEYLENGTH_SYMBOL,WORDS),
+ DEBUG_REC(CNFTXCONTROL,WORDS),
+ DEBUG_REC(CNFROAMINGMODE,WORDS),
+ DEBUG_REC(CNFHOSTAUTHENTICATION,WORDS),
+ DEBUG_REC(CNFRCVCRCERROR,WORDS),
+ DEBUG_REC(CNFMMLIFE,WORDS),
+ DEBUG_REC(CNFALTRETRYCOUNT,WORDS),
+ DEBUG_REC(CNFBEACONINT,WORDS),
+ DEBUG_REC(CNFAPPCFINFO,WORDS),
+ DEBUG_REC(CNFSTAPCFINFO,WORDS),
+ DEBUG_REC(CNFPRIORITYQUSAGE,WORDS),
+ DEBUG_REC(CNFTIMCTRL,WORDS),
+ DEBUG_REC(CNFTHIRTY2TALLY,WORDS),
+ DEBUG_REC(CNFENHSECURITY,WORDS),
+ DEBUG_REC(CNFGROUPADDRESSES,BYTES),
+ DEBUG_REC(CNFCREATEIBSS,WORDS),
+ DEBUG_REC(CNFFRAGMENTATIONTHRESHOLD,WORDS),
+ DEBUG_REC(CNFRTSTHRESHOLD,WORDS),
+ DEBUG_REC(CNFTXRATECONTROL,WORDS),
+ DEBUG_REC(CNFPROMISCUOUSMODE,WORDS),
+ DEBUG_REC(CNFBASICRATES_SYMBOL,WORDS),
+ DEBUG_REC(CNFPREAMBLE_SYMBOL,WORDS),
+ DEBUG_REC(CNFSHORTPREAMBLE,WORDS),
+ DEBUG_REC(CNFWEPKEYS_AGERE,BYTES),
+ DEBUG_REC(CNFEXCLUDELONGPREAMBLE,WORDS),
+ DEBUG_REC(CNFTXKEY_AGERE,WORDS),
+ DEBUG_REC(CNFAUTHENTICATIONRSPTO,WORDS),
+ DEBUG_REC(CNFBASICRATES,WORDS),
+ DEBUG_REC(CNFSUPPORTEDRATES,WORDS),
+ DEBUG_REC(CNFTICKTIME,WORDS),
+ DEBUG_REC(CNFSCANREQUEST,WORDS),
+ DEBUG_REC(CNFJOINREQUEST,WORDS),
+ DEBUG_REC(CNFAUTHENTICATESTATION,WORDS),
+ DEBUG_REC(CNFCHANNELINFOREQUEST,WORDS),
+ DEBUG_REC(MAXLOADTIME,WORDS),
+ DEBUG_REC(DOWNLOADBUFFER,WORDS),
+ DEBUG_REC(PRIID,WORDS),
+ DEBUG_REC(PRISUPRANGE,WORDS),
+ DEBUG_REC(CFIACTRANGES,WORDS),
+ DEBUG_REC(NICSERNUM,XSTRING),
+ DEBUG_REC(NICID,WORDS),
+ DEBUG_REC(MFISUPRANGE,WORDS),
+ DEBUG_REC(CFISUPRANGE,WORDS),
+ DEBUG_REC(CHANNELLIST,WORDS),
+ DEBUG_REC(REGULATORYDOMAINS,WORDS),
+ DEBUG_REC(TEMPTYPE,WORDS),
+/* DEBUG_REC(CIS,BYTES), */
+ DEBUG_REC(STAID,WORDS),
+ DEBUG_REC(CURRENTSSID,STRING),
+ DEBUG_REC(CURRENTBSSID,BYTES),
+ DEBUG_REC(COMMSQUALITY,WORDS),
+ DEBUG_REC(CURRENTTXRATE,WORDS),
+ DEBUG_REC(CURRENTBEACONINTERVAL,WORDS),
+ DEBUG_REC(CURRENTSCALETHRESHOLDS,WORDS),
+ DEBUG_REC(PROTOCOLRSPTIME,WORDS),
+ DEBUG_REC(SHORTRETRYLIMIT,WORDS),
+ DEBUG_REC(LONGRETRYLIMIT,WORDS),
+ DEBUG_REC(MAXTRANSMITLIFETIME,WORDS),
+ DEBUG_REC(MAXRECEIVELIFETIME,WORDS),
+ DEBUG_REC(CFPOLLABLE,WORDS),
+ DEBUG_REC(AUTHENTICATIONALGORITHMS,WORDS),
+ DEBUG_REC(PRIVACYOPTIONIMPLEMENTED,WORDS),
+ DEBUG_REC(OWNMACADDR,BYTES),
+ DEBUG_REC(SCANRESULTSTABLE,WORDS),
+ DEBUG_REC(PHYTYPE,WORDS),
+ DEBUG_REC(CURRENTCHANNEL,WORDS),
+ DEBUG_REC(CURRENTPOWERSTATE,WORDS),
+ DEBUG_REC(CCAMODE,WORDS),
+ DEBUG_REC(SUPPORTEDDATARATES,WORDS),
+ DEBUG_REC(BUILDSEQ,BYTES),
+ DEBUG_REC(FWID,XSTRING)
+#undef DEBUG_REC
+};
+
+#define DEBUG_LTV_SIZE 128
+
+static int orinoco_debug_dump_recs(struct net_device *dev)
+{
+ struct orinoco_private *priv = netdev_priv(dev);
+ hermes_t *hw = &priv->hw;
+ u8 *val8;
+ u16 *val16;
+ int i,j;
+ u16 length;
+ int err;
+
+ /* I'm not sure: we might have a lock here, so we'd better go
+ atomic, just in case. */
+ val8 = kmalloc(DEBUG_LTV_SIZE + 2, GFP_ATOMIC);
+ if (! val8)
+ return -ENOMEM;
+ val16 = (u16 *)val8;
+
+ for (i = 0; i < ARRAY_SIZE(record_table); i++) {
+ u16 rid = record_table[i].rid;
+ int len;
+
+ memset(val8, 0, DEBUG_LTV_SIZE + 2);
+
+ err = hermes_read_ltv(hw, USER_BAP, rid, DEBUG_LTV_SIZE,
+ &length, val8);
+ if (err) {
+ DEBUG(0, "Error %d reading RID 0x%04x\n", err, rid);
+ continue;
+ }
+ val16 = (u16 *)val8;
+ if (length == 0)
+ continue;
+
+ printk(KERN_DEBUG "%-15s (0x%04x): length=%d (%d bytes)\tvalue=",
+ record_table[i].name,
+ rid, length, (length-1)*2);
+ len = min(((int)length-1)*2, DEBUG_LTV_SIZE);
+
+ switch (record_table[i].displaytype) {
+ case DISPLAY_WORDS:
+ for (j = 0; j < len / 2; j++)
+ printk("%04X-", le16_to_cpu(val16[j]));
+ break;
+
+ case DISPLAY_BYTES:
+ default:
+ for (j = 0; j < len; j++)
+ printk("%02X:", val8[j]);
+ break;
+
+ case DISPLAY_STRING:
+ len = min(len, le16_to_cpu(val16[0])+2);
+ val8[len] = '\0';
+ printk("\"%s\"", (char *)&val16[1]);
+ break;
+
+ case DISPLAY_XSTRING:
+ printk("'%s'", (char *)val8);
+ }
+
+ printk("\n");
+ }
+
+ kfree(val8);
+
+ return 0;
+}
+
+/********************************************************************/
+/* Debugging */
+/********************************************************************/
+
+#if 0
+static void show_rx_frame(struct orinoco_rxframe_hdr *frame)
+{
+ printk(KERN_DEBUG "RX descriptor:\n");
+ printk(KERN_DEBUG " status = 0x%04x\n", frame->desc.status);
+ printk(KERN_DEBUG " time = 0x%08x\n", frame->desc.time);
+ printk(KERN_DEBUG " silence = 0x%02x\n", frame->desc.silence);
+ printk(KERN_DEBUG " signal = 0x%02x\n", frame->desc.signal);
+ printk(KERN_DEBUG " rate = 0x%02x\n", frame->desc.rate);
+ printk(KERN_DEBUG " rxflow = 0x%02x\n", frame->desc.rxflow);
+ printk(KERN_DEBUG " reserved = 0x%08x\n", frame->desc.reserved);
+
+ printk(KERN_DEBUG "IEEE 802.11 header:\n");
+ printk(KERN_DEBUG " frame_ctl = 0x%04x\n",
+ frame->p80211.frame_ctl);
+ printk(KERN_DEBUG " duration_id = 0x%04x\n",
+ frame->p80211.duration_id);
+ printk(KERN_DEBUG " addr1 = %02x:%02x:%02x:%02x:%02x:%02x\n",
+ frame->p80211.addr1[0], frame->p80211.addr1[1],
+ frame->p80211.addr1[2], frame->p80211.addr1[3],
+ frame->p80211.addr1[4], frame->p80211.addr1[5]);
+ printk(KERN_DEBUG " addr2 = %02x:%02x:%02x:%02x:%02x:%02x\n",
+ frame->p80211.addr2[0], frame->p80211.addr2[1],
+ frame->p80211.addr2[2], frame->p80211.addr2[3],
+ frame->p80211.addr2[4], frame->p80211.addr2[5]);
+ printk(KERN_DEBUG " addr3 = %02x:%02x:%02x:%02x:%02x:%02x\n",
+ frame->p80211.addr3[0], frame->p80211.addr3[1],
+ frame->p80211.addr3[2], frame->p80211.addr3[3],
+ frame->p80211.addr3[4], frame->p80211.addr3[5]);
+ printk(KERN_DEBUG " seq_ctl = 0x%04x\n",
+ frame->p80211.seq_ctl);
+ printk(KERN_DEBUG " addr4 = %02x:%02x:%02x:%02x:%02x:%02x\n",
+ frame->p80211.addr4[0], frame->p80211.addr4[1],
+ frame->p80211.addr4[2], frame->p80211.addr4[3],
+ frame->p80211.addr4[4], frame->p80211.addr4[5]);
+ printk(KERN_DEBUG " data_len = 0x%04x\n",
+ frame->p80211.data_len);
+
+ printk(KERN_DEBUG "IEEE 802.3 header:\n");
+ printk(KERN_DEBUG " dest = %02x:%02x:%02x:%02x:%02x:%02x\n",
+ frame->p8023.h_dest[0], frame->p8023.h_dest[1],
+ frame->p8023.h_dest[2], frame->p8023.h_dest[3],
+ frame->p8023.h_dest[4], frame->p8023.h_dest[5]);
+ printk(KERN_DEBUG " src = %02x:%02x:%02x:%02x:%02x:%02x\n",
+ frame->p8023.h_source[0], frame->p8023.h_source[1],
+ frame->p8023.h_source[2], frame->p8023.h_source[3],
+ frame->p8023.h_source[4], frame->p8023.h_source[5]);
+ printk(KERN_DEBUG " len = 0x%04x\n", frame->p8023.h_proto);
+
+ printk(KERN_DEBUG "IEEE 802.2 LLC/SNAP header:\n");
+ printk(KERN_DEBUG " DSAP = 0x%02x\n", frame->p8022.dsap);
+ printk(KERN_DEBUG " SSAP = 0x%02x\n", frame->p8022.ssap);
+ printk(KERN_DEBUG " ctrl = 0x%02x\n", frame->p8022.ctrl);
+ printk(KERN_DEBUG " OUI = %02x:%02x:%02x\n",
+ frame->p8022.oui[0], frame->p8022.oui[1], frame->p8022.oui[2]);
+ printk(KERN_DEBUG " ethertype = 0x%04x\n", frame->ethertype);
+}
+#endif /* 0 */
+
+/********************************************************************/
+/* Module initialization */
+/********************************************************************/
+
+EXPORT_SYMBOL(alloc_orinocodev);
+EXPORT_SYMBOL(free_orinocodev);
+
+EXPORT_SYMBOL(__orinoco_up);
+EXPORT_SYMBOL(__orinoco_down);
+EXPORT_SYMBOL(orinoco_stop);
+EXPORT_SYMBOL(orinoco_reinit_firmware);
+
+EXPORT_SYMBOL(orinoco_interrupt);
+
+/* Can't be declared "const" or the whole __initdata section will
+ * become const */
+static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION
+ " (David Gibson <hermes@gibson.dropbear.id.au>, "
+ "Pavel Roskin <proski@gnu.org>, et al)";
+
+static int __init init_orinoco(void)
+{
+ printk(KERN_DEBUG "%s\n", version);
+ return 0;
+}
+
+static void __exit exit_orinoco(void)
+{
+}
+
+module_init(init_orinoco);
+module_exit(exit_orinoco);
diff --git a/drivers/net/wireless/orinoco.h b/drivers/net/wireless/orinoco.h
new file mode 100644
index 0000000..13e42c2
--- /dev/null
+++ b/drivers/net/wireless/orinoco.h
@@ -0,0 +1,153 @@
+/* orinoco.h
+ *
+ * Common definitions to all pieces of the various orinoco
+ * drivers
+ */
+
+#ifndef _ORINOCO_H
+#define _ORINOCO_H
+
+#define DRIVER_VERSION "0.14alpha2"
+
+#include <linux/types.h>
+#include <linux/spinlock.h>
+#include <linux/netdevice.h>
+#include <linux/wireless.h>
+#include <linux/version.h>
+
+#include "hermes.h"
+
+/* To enable debug messages */
+//#define ORINOCO_DEBUG 3
+
+#define WIRELESS_SPY // enable iwspy support
+
+#define ORINOCO_MAX_KEY_SIZE 14
+#define ORINOCO_MAX_KEYS 4
+
+struct orinoco_key {
+ u16 len; /* always stored as little-endian */
+ char data[ORINOCO_MAX_KEY_SIZE];
+} __attribute__ ((packed));
+
+typedef enum {
+ FIRMWARE_TYPE_AGERE,
+ FIRMWARE_TYPE_INTERSIL,
+ FIRMWARE_TYPE_SYMBOL
+} fwtype_t;
+
+struct orinoco_private {
+ void *card; /* Pointer to card dependent structure */
+ int (*hard_reset)(struct orinoco_private *);
+
+ /* Synchronisation stuff */
+ spinlock_t lock;
+ int hw_unavailable;
+ struct work_struct reset_work;
+
+ /* driver state */
+ int open;
+ u16 last_linkstatus;
+
+ /* Net device stuff */
+ struct net_device *ndev;
+ struct net_device_stats stats;
+ struct iw_statistics wstats;
+
+ /* Hardware control variables */
+ hermes_t hw;
+ u16 txfid;
+
+ /* Capabilities of the hardware/firmware */
+ fwtype_t firmware_type;
+ char fw_name[32];
+ int ibss_port;
+ int nicbuf_size;
+ u16 channel_mask;
+
+ /* Boolean capabilities */
+ unsigned int has_ibss:1;
+ unsigned int has_port3:1;
+ unsigned int has_wep:1;
+ unsigned int has_big_wep:1;
+ unsigned int has_mwo:1;
+ unsigned int has_pm:1;
+ unsigned int has_preamble:1;
+ unsigned int has_sensitivity:1;
+ unsigned int broken_disableport:1;
+
+ /* Configuration paramaters */
+ u32 iw_mode;
+ int prefer_port3;
+ u16 wep_on, wep_restrict, tx_key;
+ struct orinoco_key keys[ORINOCO_MAX_KEYS];
+ int bitratemode;
+ char nick[IW_ESSID_MAX_SIZE+1];
+ char desired_essid[IW_ESSID_MAX_SIZE+1];
+ u16 frag_thresh, mwo_robust;
+ u16 channel;
+ u16 ap_density, rts_thresh;
+ u16 pm_on, pm_mcast, pm_period, pm_timeout;
+ u16 preamble;
+#ifdef WIRELESS_SPY
+ int spy_number;
+ u_char spy_address[IW_MAX_SPY][ETH_ALEN];
+ struct iw_quality spy_stat[IW_MAX_SPY];
+#endif
+
+ /* Configuration dependent variables */
+ int port_type, createibss;
+ int promiscuous, mc_count;
+};
+
+#ifdef ORINOCO_DEBUG
+extern int orinoco_debug;
+#define DEBUG(n, args...) do { if (orinoco_debug>(n)) printk(KERN_DEBUG args); } while(0)
+#else
+#define DEBUG(n, args...) do { } while (0)
+#endif /* ORINOCO_DEBUG */
+
+#define TRACE_ENTER(devname) DEBUG(2, "%s: -> %s()\n", devname, __FUNCTION__);
+#define TRACE_EXIT(devname) DEBUG(2, "%s: <- %s()\n", devname, __FUNCTION__);
+
+/********************************************************************/
+/* Exported prototypes */
+/********************************************************************/
+
+extern struct net_device *alloc_orinocodev(int sizeof_card,
+ int (*hard_reset)(struct orinoco_private *));
+extern void free_orinocodev(struct net_device *dev);
+extern int __orinoco_up(struct net_device *dev);
+extern int __orinoco_down(struct net_device *dev);
+extern int orinoco_stop(struct net_device *dev);
+extern int orinoco_reinit_firmware(struct net_device *dev);
+extern irqreturn_t orinoco_interrupt(int irq, void * dev_id, struct pt_regs *regs);
+
+/********************************************************************/
+/* Locking and synchronization functions */
+/********************************************************************/
+
+/* These functions *must* be inline or they will break horribly on
+ * SPARC, due to its weird semantics for save/restore flags. extern
+ * inline should prevent the kernel from linking or module from
+ * loading if they are not inlined. */
+extern inline int orinoco_lock(struct orinoco_private *priv,
+ unsigned long *flags)
+{
+ spin_lock_irqsave(&priv->lock, *flags);
+ if (priv->hw_unavailable) {
+ DEBUG(1, "orinoco_lock() called with hw_unavailable (dev=%p)\n",
+ priv->ndev);
+ spin_unlock_irqrestore(&priv->lock, *flags);
+ return -EBUSY;
+ }
+ return 0;
+}
+
+extern inline void orinoco_unlock(struct orinoco_private *priv,
+ unsigned long *flags)
+{
+ spin_unlock_irqrestore(&priv->lock, *flags);
+}
+
+#endif /* _ORINOCO_H */
diff --git a/drivers/net/wireless/orinoco_cs.c b/drivers/net/wireless/orinoco_cs.c
new file mode 100644
index 0000000..74a8227
--- /dev/null
+++ b/drivers/net/wireless/orinoco_cs.c
@@ -0,0 +1,636 @@
+/* orinoco_cs.c (formerly known as dldwd_cs.c)
+ *
+ * A driver for "Hermes" chipset based PCMCIA wireless adaptors, such
+ * as the Lucent WavelanIEEE/Orinoco cards and their OEM (Cabletron/
+ * EnteraSys RoamAbout 802.11, ELSA Airlancer, Melco Buffalo and others).
+ * It should also be usable on various Prism II based cards such as the
+ * Linksys, D-Link and Farallon Skyline. It should also work on Symbol
+ * cards such as the 3Com AirConnect and Ericsson WLAN.
+ *
+ * Copyright notice & release notes in file orinoco.c
+ */
+
+#define DRIVER_NAME "orinoco_cs"
+#define PFX DRIVER_NAME ": "
+
+#include <linux/config.h>
+#ifdef __IN_PCMCIA_PACKAGE__
+#include <pcmcia/k_compat.h>
+#endif /* __IN_PCMCIA_PACKAGE__ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/ioport.h>
+#include <linux/netdevice.h>
+#include <linux/if_arp.h>
+#include <linux/etherdevice.h>
+#include <linux/wireless.h>
+
+#include <pcmcia/version.h>
+#include <pcmcia/cs_types.h>
+#include <pcmcia/cs.h>
+#include <pcmcia/cistpl.h>
+#include <pcmcia/cisreg.h>
+#include <pcmcia/ds.h>
+
+#include <asm/uaccess.h>
+#include <asm/io.h>
+#include <asm/system.h>
+
+#include "orinoco.h"
+
+/********************************************************************/
+/* Module stuff */
+/********************************************************************/
+
+MODULE_AUTHOR("David Gibson <hermes@gibson.dropbear.id.au>");
+MODULE_DESCRIPTION("Driver for PCMCIA Lucent Orinoco, Prism II based and similar wireless cards");
+MODULE_LICENSE("Dual MPL/GPL");
+
+/* Module parameters */
+
+/* Some D-Link cards have buggy CIS. They do work at 5v properly, but
+ * don't have any CIS entry for it. This workaround it... */
+static int ignore_cis_vcc; /* = 0 */
+module_param(ignore_cis_vcc, int, 0);
+MODULE_PARM_DESC(ignore_cis_vcc, "Allow voltage mismatch between card and socket");
+
+/********************************************************************/
+/* Magic constants */
+/********************************************************************/
+
+/*
+ * The dev_info variable is the "key" that is used to match up this
+ * device driver with appropriate cards, through the card
+ * configuration database.
+ */
+static dev_info_t dev_info = DRIVER_NAME;
+
+/********************************************************************/
+/* Data structures */
+/********************************************************************/
+
+/* PCMCIA specific device information (goes in the card field of
+ * struct orinoco_private */
+struct orinoco_pccard {
+ dev_link_t link;
+ dev_node_t node;
+
+ /* Used to handle hard reset */
+ /* yuck, we need this hack to work around the insanity of the
+ * PCMCIA layer */
+ unsigned long hard_reset_in_progress;
+};
+
+/*
+ * A linked list of "instances" of the device. Each actual PCMCIA
+ * card corresponds to one device instance, and is described by one
+ * dev_link_t structure (defined in ds.h).
+ */
+static dev_link_t *dev_list; /* = NULL */
+
+/********************************************************************/
+/* Function prototypes */
+/********************************************************************/
+
+/* device methods */
+static int orinoco_cs_hard_reset(struct orinoco_private *priv);
+
+/* PCMCIA gumpf */
+static void orinoco_cs_config(dev_link_t * link);
+static void orinoco_cs_release(dev_link_t * link);
+static int orinoco_cs_event(event_t event, int priority,
+ event_callback_args_t * args);
+
+static dev_link_t *orinoco_cs_attach(void);
+static void orinoco_cs_detach(dev_link_t *);
+
+/********************************************************************/
+/* Device methods */
+/********************************************************************/
+
+static int
+orinoco_cs_hard_reset(struct orinoco_private *priv)
+{
+ struct orinoco_pccard *card = priv->card;
+ dev_link_t *link = &card->link;
+ int err;
+
+ /* We need atomic ops here, because we're not holding the lock */
+ set_bit(0, &card->hard_reset_in_progress);
+
+ err = pcmcia_reset_card(link->handle, NULL);
+ if (err)
+ return err;
+
+ msleep(100);
+ clear_bit(0, &card->hard_reset_in_progress);
+
+ return 0;
+}
+
+/********************************************************************/
+/* PCMCIA stuff */
+/********************************************************************/
+
+/*
+ * This creates an "instance" of the driver, allocating local data
+ * structures for one device. The device is registered with Card
+ * Services.
+ *
+ * The dev_link structure is initialized, but we don't actually
+ * configure the card at this point -- we wait until we receive a card
+ * insertion event. */
+static dev_link_t *
+orinoco_cs_attach(void)
+{
+ struct net_device *dev;
+ struct orinoco_private *priv;
+ struct orinoco_pccard *card;
+ dev_link_t *link;
+ client_reg_t client_reg;
+ int ret;
+
+ dev = alloc_orinocodev(sizeof(*card), orinoco_cs_hard_reset);
+ if (! dev)
+ return NULL;
+ priv = netdev_priv(dev);
+ card = priv->card;
+
+ /* Link both structures together */
+ link = &card->link;
+ link->priv = dev;
+
+ /* Interrupt setup */
+ link->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT;
+ link->irq.IRQInfo1 = IRQ_LEVEL_ID;
+ link->irq.Handler = orinoco_interrupt;
+ link->irq.Instance = dev;
+
+ /* General socket configuration defaults can go here. In this
+ * client, we assume very little, and rely on the CIS for
+ * almost everything. In most clients, many details (i.e.,
+ * number, sizes, and attributes of IO windows) are fixed by
+ * the nature of the device, and can be hard-wired here. */
+ link->conf.Attributes = 0;
+ link->conf.IntType = INT_MEMORY_AND_IO;
+
+ /* Register with Card Services */
+ /* FIXME: need a lock? */
+ link->next = dev_list;
+ dev_list = link;
+
+ client_reg.dev_info = &dev_info;
+ client_reg.EventMask =
+ CS_EVENT_CARD_INSERTION | CS_EVENT_CARD_REMOVAL |
+ CS_EVENT_RESET_PHYSICAL | CS_EVENT_CARD_RESET |
+ CS_EVENT_PM_SUSPEND | CS_EVENT_PM_RESUME;
+ client_reg.event_handler = &orinoco_cs_event;
+ client_reg.Version = 0x0210; /* FIXME: what does this mean? */
+ client_reg.event_callback_args.client_data = link;
+
+ ret = pcmcia_register_client(&link->handle, &client_reg);
+ if (ret != CS_SUCCESS) {
+ cs_error(link->handle, RegisterClient, ret);
+ orinoco_cs_detach(link);
+ return NULL;
+ }
+
+ return link;
+} /* orinoco_cs_attach */
+
+/*
+ * This deletes a driver "instance". The device is de-registered with
+ * Card Services. If it has been released, all local data structures
+ * are freed. Otherwise, the structures will be freed when the device
+ * is released.
+ */
+static void orinoco_cs_detach(dev_link_t *link)
+{
+ dev_link_t **linkp;
+ struct net_device *dev = link->priv;
+
+ /* Locate device structure */
+ for (linkp = &dev_list; *linkp; linkp = &(*linkp)->next)
+ if (*linkp == link)
+ break;
+
+ BUG_ON(*linkp == NULL);
+
+ if (link->state & DEV_CONFIG)
+ orinoco_cs_release(link);
+
+ /* Break the link with Card Services */
+ if (link->handle)
+ pcmcia_deregister_client(link->handle);
+
+ /* Unlink device structure, and free it */
+ *linkp = link->next;
+ DEBUG(0, PFX "detach: link=%p link->dev=%p\n", link, link->dev);
+ if (link->dev) {
+ DEBUG(0, PFX "About to unregister net device %p\n",
+ dev);
+ unregister_netdev(dev);
+ }
+ free_orinocodev(dev);
+} /* orinoco_cs_detach */
+
+/*
+ * orinoco_cs_config() is scheduled to run after a CARD_INSERTION
+ * event is received, to configure the PCMCIA socket, and to make the
+ * device available to the system.
+ */
+
+#define CS_CHECK(fn, ret) do { \
+ last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; \
+ } while (0)
+
+static void
+orinoco_cs_config(dev_link_t *link)
+{
+ struct net_device *dev = link->priv;
+ client_handle_t handle = link->handle;
+ struct orinoco_private *priv = netdev_priv(dev);
+ struct orinoco_pccard *card = priv->card;
+ hermes_t *hw = &priv->hw;
+ int last_fn, last_ret;
+ u_char buf[64];
+ config_info_t conf;
+ cisinfo_t info;
+ tuple_t tuple;
+ cisparse_t parse;
+ void __iomem *mem;
+
+ CS_CHECK(ValidateCIS, pcmcia_validate_cis(handle, &info));
+
+ /*
+ * This reads the card's CONFIG tuple to find its
+ * configuration registers.
+ */
+ tuple.DesiredTuple = CISTPL_CONFIG;
+ tuple.Attributes = 0;
+ tuple.TupleData = buf;
+ tuple.TupleDataMax = sizeof(buf);
+ tuple.TupleOffset = 0;
+ CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(handle, &tuple));
+ CS_CHECK(GetTupleData, pcmcia_get_tuple_data(handle, &tuple));
+ CS_CHECK(ParseTuple, pcmcia_parse_tuple(handle, &tuple, &parse));
+ link->conf.ConfigBase = parse.config.base;
+ link->conf.Present = parse.config.rmask[0];
+
+ /* Configure card */
+ link->state |= DEV_CONFIG;
+
+ /* Look up the current Vcc */
+ CS_CHECK(GetConfigurationInfo,
+ pcmcia_get_configuration_info(handle, &conf));
+ link->conf.Vcc = conf.Vcc;
+
+ /*
+ * In this loop, we scan the CIS for configuration table
+ * entries, each of which describes a valid card
+ * configuration, including voltage, IO window, memory window,
+ * and interrupt settings.
+ *
+ * We make no assumptions about the card to be configured: we
+ * use just the information available in the CIS. In an ideal
+ * world, this would work for any PCMCIA card, but it requires
+ * a complete and accurate CIS. In practice, a driver usually
+ * "knows" most of these things without consulting the CIS,
+ * and most client drivers will only use the CIS to fill in
+ * implementation-defined details.
+ */
+ tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
+ CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(handle, &tuple));
+ while (1) {
+ cistpl_cftable_entry_t *cfg = &(parse.cftable_entry);
+ cistpl_cftable_entry_t dflt = { .index = 0 };
+
+ if ( (pcmcia_get_tuple_data(handle, &tuple) != 0)
+ || (pcmcia_parse_tuple(handle, &tuple, &parse) != 0))
+ goto next_entry;
+
+ if (cfg->flags & CISTPL_CFTABLE_DEFAULT)
+ dflt = *cfg;
+ if (cfg->index == 0)
+ goto next_entry;
+ link->conf.ConfigIndex = cfg->index;
+
+ /* Does this card need audio output? */
+ if (cfg->flags & CISTPL_CFTABLE_AUDIO) {
+ link->conf.Attributes |= CONF_ENABLE_SPKR;
+ link->conf.Status = CCSR_AUDIO_ENA;
+ }
+
+ /* Use power settings for Vcc and Vpp if present */
+ /* Note that the CIS values need to be rescaled */
+ if (cfg->vcc.present & (1 << CISTPL_POWER_VNOM)) {
+ if (conf.Vcc != cfg->vcc.param[CISTPL_POWER_VNOM] / 10000) {
+ DEBUG(2, "orinoco_cs_config: Vcc mismatch (conf.Vcc = %d, CIS = %d)\n", conf.Vcc, cfg->vcc.param[CISTPL_POWER_VNOM] / 10000);
+ if (!ignore_cis_vcc)
+ goto next_entry;
+ }
+ } else if (dflt.vcc.present & (1 << CISTPL_POWER_VNOM)) {
+ if (conf.Vcc != dflt.vcc.param[CISTPL_POWER_VNOM] / 10000) {
+ DEBUG(2, "orinoco_cs_config: Vcc mismatch (conf.Vcc = %d, CIS = %d)\n", conf.Vcc, dflt.vcc.param[CISTPL_POWER_VNOM] / 10000);
+ if(!ignore_cis_vcc)
+ goto next_entry;
+ }
+ }
+
+ if (cfg->vpp1.present & (1 << CISTPL_POWER_VNOM))
+ link->conf.Vpp1 = link->conf.Vpp2 =
+ cfg->vpp1.param[CISTPL_POWER_VNOM] / 10000;
+ else if (dflt.vpp1.present & (1 << CISTPL_POWER_VNOM))
+ link->conf.Vpp1 = link->conf.Vpp2 =
+ dflt.vpp1.param[CISTPL_POWER_VNOM] / 10000;
+
+ /* Do we need to allocate an interrupt? */
+ link->conf.Attributes |= CONF_ENABLE_IRQ;
+
+ /* IO window settings */
+ link->io.NumPorts1 = link->io.NumPorts2 = 0;
+ if ((cfg->io.nwin > 0) || (dflt.io.nwin > 0)) {
+ cistpl_io_t *io =
+ (cfg->io.nwin) ? &cfg->io : &dflt.io;
+ link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
+ if (!(io->flags & CISTPL_IO_8BIT))
+ link->io.Attributes1 =
+ IO_DATA_PATH_WIDTH_16;
+ if (!(io->flags & CISTPL_IO_16BIT))
+ link->io.Attributes1 =
+ IO_DATA_PATH_WIDTH_8;
+ link->io.IOAddrLines =
+ io->flags & CISTPL_IO_LINES_MASK;
+ link->io.BasePort1 = io->win[0].base;
+ link->io.NumPorts1 = io->win[0].len;
+ if (io->nwin > 1) {
+ link->io.Attributes2 =
+ link->io.Attributes1;
+ link->io.BasePort2 = io->win[1].base;
+ link->io.NumPorts2 = io->win[1].len;
+ }
+
+ /* This reserves IO space but doesn't actually enable it */
+ if (pcmcia_request_io(link->handle, &link->io) != 0)
+ goto next_entry;
+ }
+
+
+ /* If we got this far, we're cool! */
+
+ break;
+
+ next_entry:
+ if (link->io.NumPorts1)
+ pcmcia_release_io(link->handle, &link->io);
+ last_ret = pcmcia_get_next_tuple(handle, &tuple);
+ if (last_ret == CS_NO_MORE_ITEMS) {
+ printk(KERN_ERR PFX "GetNextTuple(): No matching "
+ "CIS configuration. Maybe you need the "
+ "ignore_cis_vcc=1 parameter.\n");
+ goto cs_failed;
+ }
+ }
+
+ /*
+ * Allocate an interrupt line. Note that this does not assign
+ * a handler to the interrupt, unless the 'Handler' member of
+ * the irq structure is initialized.
+ */
+ CS_CHECK(RequestIRQ, pcmcia_request_irq(link->handle, &link->irq));
+
+ /* We initialize the hermes structure before completing PCMCIA
+ * configuration just in case the interrupt handler gets
+ * called. */
+ mem = ioport_map(link->io.BasePort1, link->io.NumPorts1);
+ if (!mem)
+ goto cs_failed;
+
+ hermes_struct_init(hw, mem, HERMES_16BIT_REGSPACING);
+
+ /*
+ * This actually configures the PCMCIA socket -- setting up
+ * the I/O windows and the interrupt mapping, and putting the
+ * card and host interface into "Memory and IO" mode.
+ */
+ CS_CHECK(RequestConfiguration,
+ pcmcia_request_configuration(link->handle, &link->conf));
+
+ /* Ok, we have the configuration, prepare to register the netdev */
+ dev->base_addr = link->io.BasePort1;
+ dev->irq = link->irq.AssignedIRQ;
+ SET_MODULE_OWNER(dev);
+ card->node.major = card->node.minor = 0;
+
+ SET_NETDEV_DEV(dev, &handle_to_dev(handle));
+ /* Tell the stack we exist */
+ if (register_netdev(dev) != 0) {
+ printk(KERN_ERR PFX "register_netdev() failed\n");
+ goto failed;
+ }
+
+ /* At this point, the dev_node_t structure(s) needs to be
+ * initialized and arranged in a linked list at link->dev. */
+ strcpy(card->node.dev_name, dev->name);
+ link->dev = &card->node; /* link->dev being non-NULL is also
+ used to indicate that the
+ net_device has been registered */
+ link->state &= ~DEV_CONFIG_PENDING;
+
+ /* Finally, report what we've done */
+ printk(KERN_DEBUG "%s: index 0x%02x: Vcc %d.%d",
+ dev->name, link->conf.ConfigIndex,
+ link->conf.Vcc / 10, link->conf.Vcc % 10);
+ if (link->conf.Vpp1)
+ printk(", Vpp %d.%d", link->conf.Vpp1 / 10,
+ link->conf.Vpp1 % 10);
+ printk(", irq %d", link->irq.AssignedIRQ);
+ if (link->io.NumPorts1)
+ printk(", io 0x%04x-0x%04x", link->io.BasePort1,
+ link->io.BasePort1 + link->io.NumPorts1 - 1);
+ if (link->io.NumPorts2)
+ printk(" & 0x%04x-0x%04x", link->io.BasePort2,
+ link->io.BasePort2 + link->io.NumPorts2 - 1);
+ printk("\n");
+
+ return;
+
+ cs_failed:
+ cs_error(link->handle, last_fn, last_ret);
+
+ failed:
+ orinoco_cs_release(link);
+} /* orinoco_cs_config */
+
+/*
+ * After a card is removed, orinoco_cs_release() will unregister the
+ * device, and release the PCMCIA configuration. If the device is
+ * still open, this will be postponed until it is closed.
+ */
+static void
+orinoco_cs_release(dev_link_t *link)
+{
+ struct net_device *dev = link->priv;
+ struct orinoco_private *priv = netdev_priv(dev);
+ unsigned long flags;
+
+ /* We're committed to taking the device away now, so mark the
+ * hardware as unavailable */
+ spin_lock_irqsave(&priv->lock, flags);
+ priv->hw_unavailable++;
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ /* Don't bother checking to see if these succeed or not */
+ pcmcia_release_configuration(link->handle);
+ if (link->io.NumPorts1)
+ pcmcia_release_io(link->handle, &link->io);
+ if (link->irq.AssignedIRQ)
+ pcmcia_release_irq(link->handle, &link->irq);
+ link->state &= ~DEV_CONFIG;
+ if (priv->hw.iobase)
+ ioport_unmap(priv->hw.iobase);
+} /* orinoco_cs_release */
+
+/*
+ * The card status event handler. Mostly, this schedules other stuff
+ * to run after an event is received.
+ */
+static int
+orinoco_cs_event(event_t event, int priority,
+ event_callback_args_t * args)
+{
+ dev_link_t *link = args->client_data;
+ struct net_device *dev = link->priv;
+ struct orinoco_private *priv = netdev_priv(dev);
+ struct orinoco_pccard *card = priv->card;
+ int err = 0;
+ unsigned long flags;
+
+ switch (event) {
+ case CS_EVENT_CARD_REMOVAL:
+ link->state &= ~DEV_PRESENT;
+ if (link->state & DEV_CONFIG) {
+ unsigned long flags;
+
+ spin_lock_irqsave(&priv->lock, flags);
+ netif_device_detach(dev);
+ priv->hw_unavailable++;
+ spin_unlock_irqrestore(&priv->lock, flags);
+ }
+ break;
+
+ case CS_EVENT_CARD_INSERTION:
+ link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
+ orinoco_cs_config(link);
+ break;
+
+ case CS_EVENT_PM_SUSPEND:
+ link->state |= DEV_SUSPEND;
+ /* Fall through... */
+ case CS_EVENT_RESET_PHYSICAL:
+ /* Mark the device as stopped, to block IO until later */
+ if (link->state & DEV_CONFIG) {
+ /* This is probably racy, but I can't think of
+ a better way, short of rewriting the PCMCIA
+ layer to not suck :-( */
+ if (! test_bit(0, &card->hard_reset_in_progress)) {
+ spin_lock_irqsave(&priv->lock, flags);
+
+ err = __orinoco_down(dev);
+ if (err)
+ printk(KERN_WARNING "%s: %s: Error %d downing interface\n",
+ dev->name,
+ event == CS_EVENT_PM_SUSPEND ? "SUSPEND" : "RESET_PHYSICAL",
+ err);
+
+ netif_device_detach(dev);
+ priv->hw_unavailable++;
+
+ spin_unlock_irqrestore(&priv->lock, flags);
+ }
+
+ pcmcia_release_configuration(link->handle);
+ }
+ break;
+
+ case CS_EVENT_PM_RESUME:
+ link->state &= ~DEV_SUSPEND;
+ /* Fall through... */
+ case CS_EVENT_CARD_RESET:
+ if (link->state & DEV_CONFIG) {
+ /* FIXME: should we double check that this is
+ * the same card as we had before */
+ pcmcia_request_configuration(link->handle, &link->conf);
+
+ if (! test_bit(0, &card->hard_reset_in_progress)) {
+ err = orinoco_reinit_firmware(dev);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d re-initializing firmware\n",
+ dev->name, err);
+ break;
+ }
+
+ spin_lock_irqsave(&priv->lock, flags);
+
+ netif_device_attach(dev);
+ priv->hw_unavailable--;
+
+ if (priv->open && ! priv->hw_unavailable) {
+ err = __orinoco_up(dev);
+ if (err)
+ printk(KERN_ERR "%s: Error %d restarting card\n",
+ dev->name, err);
+
+ }
+
+ spin_unlock_irqrestore(&priv->lock, flags);
+ }
+ }
+ break;
+ }
+
+ return err;
+} /* orinoco_cs_event */
+
+/********************************************************************/
+/* Module initialization */
+/********************************************************************/
+
+/* Can't be declared "const" or the whole __initdata section will
+ * become const */
+static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION
+ " (David Gibson <hermes@gibson.dropbear.id.au>, "
+ "Pavel Roskin <proski@gnu.org>, et al)";
+
+static struct pcmcia_driver orinoco_driver = {
+ .owner = THIS_MODULE,
+ .drv = {
+ .name = DRIVER_NAME,
+ },
+ .attach = orinoco_cs_attach,
+ .detach = orinoco_cs_detach,
+};
+
+static int __init
+init_orinoco_cs(void)
+{
+ printk(KERN_DEBUG "%s\n", version);
+
+ return pcmcia_register_driver(&orinoco_driver);
+}
+
+static void __exit
+exit_orinoco_cs(void)
+{
+ pcmcia_unregister_driver(&orinoco_driver);
+ BUG_ON(dev_list != NULL);
+}
+
+module_init(init_orinoco_cs);
+module_exit(exit_orinoco_cs);
diff --git a/drivers/net/wireless/orinoco_pci.c b/drivers/net/wireless/orinoco_pci.c
new file mode 100644
index 0000000..ff30d37e
--- /dev/null
+++ b/drivers/net/wireless/orinoco_pci.c
@@ -0,0 +1,417 @@
+/* orinoco_pci.c
+ *
+ * Driver for Prism II devices that have a direct PCI interface
+ * (i.e., not in a Pcmcia or PLX bridge)
+ *
+ * Specifically here we're talking about the Linksys WMP11
+ *
+ * Current maintainers (as of 29 September 2003) are:
+ * Pavel Roskin <proski AT gnu.org>
+ * and David Gibson <hermes AT gibson.dropbear.id.au>
+ *
+ * Some of this code is borrowed from orinoco_plx.c
+ * Copyright (C) 2001 Daniel Barlow <dan AT telent.net>
+ * Some of this code is "inspired" by linux-wlan-ng-0.1.10, but nothing
+ * has been copied from it. linux-wlan-ng-0.1.10 is originally :
+ * Copyright (C) 1999 AbsoluteValue Systems, Inc. All Rights Reserved.
+ * This file originally written by:
+ * Copyright (C) 2001 Jean Tourrilhes <jt AT hpl.hp.com>
+ * And is now maintained by:
+ * (C) Copyright David Gibson, IBM Corp. 2002-2003.
+ *
+ * The contents of this file are subject to the Mozilla Public License
+ * Version 1.1 (the "License"); you may not use this file except in
+ * compliance with the License. You may obtain a copy of the License
+ * at http://www.mozilla.org/MPL/
+ *
+ * Software distributed under the License is distributed on an "AS IS"
+ * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
+ * the License for the specific language governing rights and
+ * limitations under the License.
+ *
+ * Alternatively, the contents of this file may be used under the
+ * terms of the GNU General Public License version 2 (the "GPL"), in
+ * which case the provisions of the GPL are applicable instead of the
+ * above. If you wish to allow the use of your version of this file
+ * only under the terms of the GPL and not to allow others to use your
+ * version of this file under the MPL, indicate your decision by
+ * deleting the provisions above and replace them with the notice and
+ * other provisions required by the GPL. If you do not delete the
+ * provisions above, a recipient may use your version of this file
+ * under either the MPL or the GPL.
+ */
+
+/*
+ * Theory of operation...
+ * -------------------
+ * Maybe you had a look in orinoco_plx. Well, this is totally different...
+ *
+ * The card contains only one PCI region, which contains all the usual
+ * hermes registers.
+ *
+ * The driver will memory map this region in normal memory. Because
+ * the hermes registers are mapped in normal memory and not in ISA I/O
+ * post space, we can't use the usual inw/outw macros and we need to
+ * use readw/writew.
+ * This slight difference force us to compile our own version of
+ * hermes.c with the register access macro changed. That's a bit
+ * hackish but works fine.
+ *
+ * Note that the PCI region is pretty big (4K). That's much more than
+ * the usual set of hermes register (0x0 -> 0x3E). I've got a strong
+ * suspicion that the whole memory space of the adapter is in fact in
+ * this region. Accessing directly the adapter memory instead of going
+ * through the usual register would speed up significantely the
+ * operations...
+ *
+ * Finally, the card looks like this :
+-----------------------
+ Bus 0, device 14, function 0:
+ Network controller: PCI device 1260:3873 (Harris Semiconductor) (rev 1).
+ IRQ 11.
+ Master Capable. Latency=248.
+ Prefetchable 32 bit memory at 0xffbcc000 [0xffbccfff].
+-----------------------
+00:0e.0 Network controller: Harris Semiconductor: Unknown device 3873 (rev 01)
+ Subsystem: Unknown device 1737:3874
+ Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
+ Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
+ Latency: 248 set, cache line size 08
+ Interrupt: pin A routed to IRQ 11
+ Region 0: Memory at ffbcc000 (32-bit, prefetchable) [size=4K]
+ Capabilities: [dc] Power Management version 2
+ Flags: PMEClk- AuxPwr- DSI- D1+ D2+ PME+
+ Status: D0 PME-Enable- DSel=0 DScale=0 PME-
+-----------------------
+ *
+ * That's all..
+ *
+ * Jean II
+ */
+
+#define DRIVER_NAME "orinoco_pci"
+#define PFX DRIVER_NAME ": "
+
+#include <linux/config.h>
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/ioport.h>
+#include <linux/netdevice.h>
+#include <linux/if_arp.h>
+#include <linux/etherdevice.h>
+#include <linux/list.h>
+#include <linux/pci.h>
+#include <linux/fcntl.h>
+
+#include <asm/uaccess.h>
+#include <asm/io.h>
+#include <asm/system.h>
+
+#include "hermes.h"
+#include "orinoco.h"
+
+/* All the magic there is from wlan-ng */
+/* Magic offset of the reset register of the PCI card */
+#define HERMES_PCI_COR (0x26)
+/* Magic bitmask to reset the card */
+#define HERMES_PCI_COR_MASK (0x0080)
+/* Magic timeouts for doing the reset.
+ * Those times are straight from wlan-ng, and it is claimed that they
+ * are necessary. Alan will kill me. Take your time and grab a coffee. */
+#define HERMES_PCI_COR_ONT (250) /* ms */
+#define HERMES_PCI_COR_OFFT (500) /* ms */
+#define HERMES_PCI_COR_BUSYT (500) /* ms */
+
+/* Orinoco PCI specific data */
+struct orinoco_pci_card {
+ void __iomem *pci_ioaddr;
+};
+
+/*
+ * Do a soft reset of the PCI card using the Configuration Option Register
+ * We need this to get going...
+ * This is the part of the code that is strongly inspired from wlan-ng
+ *
+ * Note : This code is done with irq enabled. This mean that many
+ * interrupts will occur while we are there. This is why we use the
+ * jiffies to regulate time instead of a straight mdelay(). Usually we
+ * need only around 245 iteration of the loop to do 250 ms delay.
+ *
+ * Note bis : Don't try to access HERMES_CMD during the reset phase.
+ * It just won't work !
+ */
+static int
+orinoco_pci_cor_reset(struct orinoco_private *priv)
+{
+ hermes_t *hw = &priv->hw;
+ unsigned long timeout;
+ u16 reg;
+
+ /* Assert the reset until the card notice */
+ hermes_write_regn(hw, PCI_COR, HERMES_PCI_COR_MASK);
+ mdelay(HERMES_PCI_COR_ONT);
+
+ /* Give time for the card to recover from this hard effort */
+ hermes_write_regn(hw, PCI_COR, 0x0000);
+ mdelay(HERMES_PCI_COR_OFFT);
+
+ /* The card is ready when it's no longer busy */
+ timeout = jiffies + (HERMES_PCI_COR_BUSYT * HZ / 1000);
+ reg = hermes_read_regn(hw, CMD);
+ while (time_before(jiffies, timeout) && (reg & HERMES_CMD_BUSY)) {
+ mdelay(1);
+ reg = hermes_read_regn(hw, CMD);
+ }
+
+ /* Still busy? */
+ if (reg & HERMES_CMD_BUSY) {
+ printk(KERN_ERR PFX "Busy timeout\n");
+ return -ETIMEDOUT;
+ }
+
+ return 0;
+}
+
+/*
+ * Initialise a card. Mostly similar to PLX code.
+ */
+static int orinoco_pci_init_one(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ int err = 0;
+ unsigned long pci_iorange;
+ u16 __iomem *pci_ioaddr = NULL;
+ unsigned long pci_iolen;
+ struct orinoco_private *priv = NULL;
+ struct orinoco_pci_card *card;
+ struct net_device *dev = NULL;
+
+ err = pci_enable_device(pdev);
+ if (err) {
+ printk(KERN_ERR PFX "Cannot enable PCI device\n");
+ return err;
+ }
+
+ err = pci_request_regions(pdev, DRIVER_NAME);
+ if (err != 0) {
+ printk(KERN_ERR PFX "Cannot obtain PCI resources\n");
+ goto fail_resources;
+ }
+
+ /* Resource 0 is mapped to the hermes registers */
+ pci_iorange = pci_resource_start(pdev, 0);
+ pci_iolen = pci_resource_len(pdev, 0);
+ pci_ioaddr = ioremap(pci_iorange, pci_iolen);
+ if (!pci_iorange) {
+ printk(KERN_ERR PFX "Cannot remap hardware registers\n");
+ goto fail_map;
+ }
+
+ /* Allocate network device */
+ dev = alloc_orinocodev(sizeof(*card), orinoco_pci_cor_reset);
+ if (! dev) {
+ err = -ENOMEM;
+ goto fail_alloc;
+ }
+
+ priv = netdev_priv(dev);
+ card = priv->card;
+ card->pci_ioaddr = pci_ioaddr;
+ dev->mem_start = pci_iorange;
+ dev->mem_end = pci_iorange + pci_iolen - 1;
+ SET_MODULE_OWNER(dev);
+ SET_NETDEV_DEV(dev, &pdev->dev);
+
+ hermes_struct_init(&priv->hw, pci_ioaddr, HERMES_32BIT_REGSPACING);
+
+ printk(KERN_DEBUG PFX "Detected device %s, mem:0x%lx-0x%lx, irq %d\n",
+ pci_name(pdev), dev->mem_start, dev->mem_end, pdev->irq);
+
+ err = request_irq(pdev->irq, orinoco_interrupt, SA_SHIRQ,
+ dev->name, dev);
+ if (err) {
+ printk(KERN_ERR PFX "Cannot allocate IRQ %d\n", pdev->irq);
+ err = -EBUSY;
+ goto fail_irq;
+ }
+ dev->irq = pdev->irq;
+
+ /* Perform a COR reset to start the card */
+ err = orinoco_pci_cor_reset(priv);
+ if (err) {
+ printk(KERN_ERR PFX "Initial reset failed\n");
+ goto fail;
+ }
+
+ err = register_netdev(dev);
+ if (err) {
+ printk(KERN_ERR PFX "Failed to register net device\n");
+ goto fail;
+ }
+
+ pci_set_drvdata(pdev, dev);
+
+ return 0;
+
+ fail:
+ free_irq(pdev->irq, dev);
+
+ fail_irq:
+ pci_set_drvdata(pdev, NULL);
+ free_orinocodev(dev);
+
+ fail_alloc:
+ iounmap(pci_ioaddr);
+
+ fail_map:
+ pci_release_regions(pdev);
+
+ fail_resources:
+ pci_disable_device(pdev);
+
+ return err;
+}
+
+static void __devexit orinoco_pci_remove_one(struct pci_dev *pdev)
+{
+ struct net_device *dev = pci_get_drvdata(pdev);
+ struct orinoco_private *priv = netdev_priv(dev);
+ struct orinoco_pci_card *card = priv->card;
+
+ unregister_netdev(dev);
+ free_irq(dev->irq, dev);
+ pci_set_drvdata(pdev, NULL);
+ free_orinocodev(dev);
+ iounmap(card->pci_ioaddr);
+ pci_release_regions(pdev);
+ pci_disable_device(pdev);
+}
+
+static int orinoco_pci_suspend(struct pci_dev *pdev, u32 state)
+{
+ struct net_device *dev = pci_get_drvdata(pdev);
+ struct orinoco_private *priv = netdev_priv(dev);
+ unsigned long flags;
+ int err;
+
+ printk(KERN_DEBUG "%s: Orinoco-PCI entering sleep mode (state=%d)\n",
+ dev->name, state);
+
+ err = orinoco_lock(priv, &flags);
+ if (err) {
+ printk(KERN_ERR "%s: hw_unavailable on orinoco_pci_suspend\n",
+ dev->name);
+ return err;
+ }
+
+ err = __orinoco_down(dev);
+ if (err)
+ printk(KERN_WARNING "%s: orinoco_pci_suspend(): Error %d downing interface\n",
+ dev->name, err);
+
+ netif_device_detach(dev);
+
+ priv->hw_unavailable++;
+
+ orinoco_unlock(priv, &flags);
+
+ pci_save_state(pdev);
+ pci_set_power_state(pdev, 3);
+
+ return 0;
+}
+
+static int orinoco_pci_resume(struct pci_dev *pdev)
+{
+ struct net_device *dev = pci_get_drvdata(pdev);
+ struct orinoco_private *priv = netdev_priv(dev);
+ unsigned long flags;
+ int err;
+
+ printk(KERN_DEBUG "%s: Orinoco-PCI waking up\n", dev->name);
+
+ pci_set_power_state(pdev, 0);
+ pci_restore_state(pdev);
+
+ err = orinoco_reinit_firmware(dev);
+ if (err) {
+ printk(KERN_ERR "%s: Error %d re-initializing firmware on orinoco_pci_resume()\n",
+ dev->name, err);
+ return err;
+ }
+
+ spin_lock_irqsave(&priv->lock, flags);
+
+ netif_device_attach(dev);
+
+ priv->hw_unavailable--;
+
+ if (priv->open && (! priv->hw_unavailable)) {
+ err = __orinoco_up(dev);
+ if (err)
+ printk(KERN_ERR "%s: Error %d restarting card on orinoco_pci_resume()\n",
+ dev->name, err);
+ }
+
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ return 0;
+}
+
+static struct pci_device_id orinoco_pci_pci_id_table[] = {
+ /* Intersil Prism 3 */
+ {0x1260, 0x3872, PCI_ANY_ID, PCI_ANY_ID,},
+ /* Intersil Prism 2.5 */
+ {0x1260, 0x3873, PCI_ANY_ID, PCI_ANY_ID,},
+ /* Samsung MagicLAN SWL-2210P */
+ {0x167d, 0xa000, PCI_ANY_ID, PCI_ANY_ID,},
+ {0,},
+};
+
+MODULE_DEVICE_TABLE(pci, orinoco_pci_pci_id_table);
+
+static struct pci_driver orinoco_pci_driver = {
+ .name = DRIVER_NAME,
+ .id_table = orinoco_pci_pci_id_table,
+ .probe = orinoco_pci_init_one,
+ .remove = __devexit_p(orinoco_pci_remove_one),
+ .suspend = orinoco_pci_suspend,
+ .resume = orinoco_pci_resume,
+};
+
+static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION
+ " (Pavel Roskin <proski@gnu.org>,"
+ " David Gibson <hermes@gibson.dropbear.id.au> &"
+ " Jean Tourrilhes <jt@hpl.hp.com>)";
+MODULE_AUTHOR("Pavel Roskin <proski@gnu.org> & David Gibson <hermes@gibson.dropbear.id.au>");
+MODULE_DESCRIPTION("Driver for wireless LAN cards using direct PCI interface");
+MODULE_LICENSE("Dual MPL/GPL");
+
+static int __init orinoco_pci_init(void)
+{
+ printk(KERN_DEBUG "%s\n", version);
+ return pci_module_init(&orinoco_pci_driver);
+}
+
+static void __exit orinoco_pci_exit(void)
+{
+ pci_unregister_driver(&orinoco_pci_driver);
+}
+
+module_init(orinoco_pci_init);
+module_exit(orinoco_pci_exit);
+
+/*
+ * Local variables:
+ * c-indent-level: 8
+ * c-basic-offset: 8
+ * tab-width: 8
+ * End:
+ */
diff --git a/drivers/net/wireless/orinoco_plx.c b/drivers/net/wireless/orinoco_plx.c
new file mode 100644
index 0000000..7ab05b8
--- /dev/null
+++ b/drivers/net/wireless/orinoco_plx.c
@@ -0,0 +1,419 @@
+/* orinoco_plx.c
+ *
+ * Driver for Prism II devices which would usually be driven by orinoco_cs,
+ * but are connected to the PCI bus by a PLX9052.
+ *
+ * Current maintainers (as of 29 September 2003) are:
+ * Pavel Roskin <proski AT gnu.org>
+ * and David Gibson <hermes AT gibson.dropbear.id.au>
+ *
+ * (C) Copyright David Gibson, IBM Corp. 2001-2003.
+ * Copyright (C) 2001 Daniel Barlow
+ *
+ * The contents of this file are subject to the Mozilla Public License
+ * Version 1.1 (the "License"); you may not use this file except in
+ * compliance with the License. You may obtain a copy of the License
+ * at http://www.mozilla.org/MPL/
+ *
+ * Software distributed under the License is distributed on an "AS IS"
+ * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
+ * the License for the specific language governing rights and
+ * limitations under the License.
+ *
+ * Alternatively, the contents of this file may be used under the
+ * terms of the GNU General Public License version 2 (the "GPL"), in
+ * which case the provisions of the GPL are applicable instead of the
+ * above. If you wish to allow the use of your version of this file
+ * only under the terms of the GPL and not to allow others to use your
+ * version of this file under the MPL, indicate your decision by
+ * deleting the provisions above and replace them with the notice and
+ * other provisions required by the GPL. If you do not delete the
+ * provisions above, a recipient may use your version of this file
+ * under either the MPL or the GPL.
+
+ * Caution: this is experimental and probably buggy. For success and
+ * failure reports for different cards and adaptors, see
+ * orinoco_plx_pci_id_table near the end of the file. If you have a
+ * card we don't have the PCI id for, and looks like it should work,
+ * drop me mail with the id and "it works"/"it doesn't work".
+ *
+ * Note: if everything gets detected fine but it doesn't actually send
+ * or receive packets, your first port of call should probably be to
+ * try newer firmware in the card. Especially if you're doing Ad-Hoc
+ * modes.
+ *
+ * The actual driving is done by orinoco.c, this is just resource
+ * allocation stuff. The explanation below is courtesy of Ryan Niemi
+ * on the linux-wlan-ng list at
+ * http://archives.neohapsis.com/archives/dev/linux-wlan/2001-q1/0026.html
+ *
+ * The PLX9052-based cards (WL11000 and several others) are a
+ * different beast than the usual PCMCIA-based PRISM2 configuration
+ * expected by wlan-ng. Here's the general details on how the WL11000
+ * PCI adapter works:
+ *
+ * - Two PCI I/O address spaces, one 0x80 long which contains the
+ * PLX9052 registers, and one that's 0x40 long mapped to the PCMCIA
+ * slot I/O address space.
+ *
+ * - One PCI memory address space, mapped to the PCMCIA memory space
+ * (containing the CIS).
+ *
+ * After identifying the I/O and memory space, you can read through
+ * the memory space to confirm the CIS's device ID or manufacturer ID
+ * to make sure it's the expected card. qKeep in mind that the PCMCIA
+ * spec specifies the CIS as the lower 8 bits of each word read from
+ * the CIS, so to read the bytes of the CIS, read every other byte
+ * (0,2,4,...). Passing that test, you need to enable the I/O address
+ * space on the PCMCIA card via the PCMCIA COR register. This is the
+ * first byte following the CIS. In my case (which may not have any
+ * relation to what's on the PRISM2 cards), COR was at offset 0x800
+ * within the PCI memory space. Write 0x41 to the COR register to
+ * enable I/O mode and to select level triggered interrupts. To
+ * confirm you actually succeeded, read the COR register back and make
+ * sure it actually got set to 0x41, incase you have an unexpected
+ * card inserted.
+ *
+ * Following that, you can treat the second PCI I/O address space (the
+ * one that's not 0x80 in length) as the PCMCIA I/O space.
+ *
+ * Note that in the Eumitcom's source for their drivers, they register
+ * the interrupt as edge triggered when registering it with the
+ * Windows kernel. I don't recall how to register edge triggered on
+ * Linux (if it can be done at all). But in some experimentation, I
+ * don't see much operational difference between using either
+ * interrupt mode. Don't mess with the interrupt mode in the COR
+ * register though, as the PLX9052 wants level triggers with the way
+ * the serial EEPROM configures it on the WL11000.
+ *
+ * There's some other little quirks related to timing that I bumped
+ * into, but I don't recall right now. Also, there's two variants of
+ * the WL11000 I've seen, revision A1 and T2. These seem to differ
+ * slightly in the timings configured in the wait-state generator in
+ * the PLX9052. There have also been some comments from Eumitcom that
+ * cards shouldn't be hot swapped, apparently due to risk of cooking
+ * the PLX9052. I'm unsure why they believe this, as I can't see
+ * anything in the design that would really cause a problem, except
+ * for crashing drivers not written to expect it. And having developed
+ * drivers for the WL11000, I'd say it's quite tricky to write code
+ * that will successfully deal with a hot unplug. Very odd things
+ * happen on the I/O side of things. But anyway, be warned. Despite
+ * that, I've hot-swapped a number of times during debugging and
+ * driver development for various reasons (stuck WAIT# line after the
+ * radio card's firmware locks up).
+ *
+ * Hope this is enough info for someone to add PLX9052 support to the
+ * wlan-ng card. In the case of the WL11000, the PCI ID's are
+ * 0x1639/0x0200, with matching subsystem ID's. Other PLX9052-based
+ * manufacturers other than Eumitcom (or on cards other than the
+ * WL11000) may have different PCI ID's.
+ *
+ * If anyone needs any more specific info, let me know. I haven't had
+ * time to implement support myself yet, and with the way things are
+ * going, might not have time for a while..
+ */
+
+#define DRIVER_NAME "orinoco_plx"
+#define PFX DRIVER_NAME ": "
+
+#include <linux/config.h>
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/ioport.h>
+#include <asm/uaccess.h>
+#include <asm/io.h>
+#include <asm/system.h>
+#include <linux/netdevice.h>
+#include <linux/if_arp.h>
+#include <linux/etherdevice.h>
+#include <linux/list.h>
+#include <linux/pci.h>
+#include <linux/fcntl.h>
+
+#include <pcmcia/cisreg.h>
+
+#include "hermes.h"
+#include "orinoco.h"
+
+#define COR_OFFSET (0x3e0) /* COR attribute offset of Prism2 PC card */
+#define COR_VALUE (COR_LEVEL_REQ | COR_FUNC_ENA) /* Enable PC card with interrupt in level trigger */
+#define COR_RESET (0x80) /* reset bit in the COR register */
+#define PLX_RESET_TIME (500) /* milliseconds */
+
+#define PLX_INTCSR 0x4c /* Interrupt Control & Status Register */
+#define PLX_INTCSR_INTEN (1<<6) /* Interrupt Enable bit */
+
+static const u8 cis_magic[] = {
+ 0x01, 0x03, 0x00, 0x00, 0xff, 0x17, 0x04, 0x67
+};
+
+/* Orinoco PLX specific data */
+struct orinoco_plx_card {
+ void __iomem *attr_mem;
+};
+
+/*
+ * Do a soft reset of the card using the Configuration Option Register
+ */
+static int orinoco_plx_cor_reset(struct orinoco_private *priv)
+{
+ hermes_t *hw = &priv->hw;
+ struct orinoco_plx_card *card = priv->card;
+ u8 __iomem *attr_mem = card->attr_mem;
+ unsigned long timeout;
+ u16 reg;
+
+ writeb(COR_VALUE | COR_RESET, attr_mem + COR_OFFSET);
+ mdelay(1);
+
+ writeb(COR_VALUE, attr_mem + COR_OFFSET);
+ mdelay(1);
+
+ /* Just in case, wait more until the card is no longer busy */
+ timeout = jiffies + (PLX_RESET_TIME * HZ / 1000);
+ reg = hermes_read_regn(hw, CMD);
+ while (time_before(jiffies, timeout) && (reg & HERMES_CMD_BUSY)) {
+ mdelay(1);
+ reg = hermes_read_regn(hw, CMD);
+ }
+
+ /* Did we timeout ? */
+ if (reg & HERMES_CMD_BUSY) {
+ printk(KERN_ERR PFX "Busy timeout\n");
+ return -ETIMEDOUT;
+ }
+
+ return 0;
+}
+
+
+static int orinoco_plx_init_one(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ int err = 0;
+ u8 __iomem *attr_mem = NULL;
+ u32 csr_reg, plx_addr;
+ struct orinoco_private *priv = NULL;
+ struct orinoco_plx_card *card;
+ unsigned long pccard_ioaddr = 0;
+ unsigned long pccard_iolen = 0;
+ struct net_device *dev = NULL;
+ void __iomem *mem;
+ int i;
+
+ err = pci_enable_device(pdev);
+ if (err) {
+ printk(KERN_ERR PFX "Cannot enable PCI device\n");
+ return err;
+ }
+
+ err = pci_request_regions(pdev, DRIVER_NAME);
+ if (err != 0) {
+ printk(KERN_ERR PFX "Cannot obtain PCI resources\n");
+ goto fail_resources;
+ }
+
+ /* Resource 1 is mapped to PLX-specific registers */
+ plx_addr = pci_resource_start(pdev, 1);
+
+ /* Resource 2 is mapped to the PCMCIA attribute memory */
+ attr_mem = ioremap(pci_resource_start(pdev, 2),
+ pci_resource_len(pdev, 2));
+ if (!attr_mem) {
+ printk(KERN_ERR PFX "Cannot remap PCMCIA space\n");
+ goto fail_map_attr;
+ }
+
+ /* Resource 3 is mapped to the PCMCIA I/O address space */
+ pccard_ioaddr = pci_resource_start(pdev, 3);
+ pccard_iolen = pci_resource_len(pdev, 3);
+
+ mem = pci_iomap(pdev, 3, 0);
+ if (!mem) {
+ err = -ENOMEM;
+ goto fail_map_io;
+ }
+
+ /* Allocate network device */
+ dev = alloc_orinocodev(sizeof(*card), orinoco_plx_cor_reset);
+ if (!dev) {
+ printk(KERN_ERR PFX "Cannot allocate network device\n");
+ err = -ENOMEM;
+ goto fail_alloc;
+ }
+
+ priv = netdev_priv(dev);
+ card = priv->card;
+ card->attr_mem = attr_mem;
+ dev->base_addr = pccard_ioaddr;
+ SET_MODULE_OWNER(dev);
+ SET_NETDEV_DEV(dev, &pdev->dev);
+
+ hermes_struct_init(&priv->hw, mem, HERMES_16BIT_REGSPACING);
+
+ printk(KERN_DEBUG PFX "Detected Orinoco/Prism2 PLX device "
+ "at %s irq:%d, io addr:0x%lx\n", pci_name(pdev), pdev->irq,
+ pccard_ioaddr);
+
+ err = request_irq(pdev->irq, orinoco_interrupt, SA_SHIRQ,
+ dev->name, dev);
+ if (err) {
+ printk(KERN_ERR PFX "Cannot allocate IRQ %d\n", pdev->irq);
+ err = -EBUSY;
+ goto fail_irq;
+ }
+ dev->irq = pdev->irq;
+
+ /* bjoern: We need to tell the card to enable interrupts, in
+ case the serial eprom didn't do this already. See the
+ PLX9052 data book, p8-1 and 8-24 for reference. */
+ csr_reg = inl(plx_addr + PLX_INTCSR);
+ if (!(csr_reg & PLX_INTCSR_INTEN)) {
+ csr_reg |= PLX_INTCSR_INTEN;
+ outl(csr_reg, plx_addr + PLX_INTCSR);
+ csr_reg = inl(plx_addr + PLX_INTCSR);
+ if (!(csr_reg & PLX_INTCSR_INTEN)) {
+ printk(KERN_ERR PFX "Cannot enable interrupts\n");
+ goto fail;
+ }
+ }
+
+ err = orinoco_plx_cor_reset(priv);
+ if (err) {
+ printk(KERN_ERR PFX "Initial reset failed\n");
+ goto fail;
+ }
+
+ printk(KERN_DEBUG PFX "CIS: ");
+ for (i = 0; i < 16; i++) {
+ printk("%02X:", readb(attr_mem + 2*i));
+ }
+ printk("\n");
+
+ /* Verify whether a supported PC card is present */
+ /* FIXME: we probably need to be smarted about this */
+ for (i = 0; i < sizeof(cis_magic); i++) {
+ if (cis_magic[i] != readb(attr_mem +2*i)) {
+ printk(KERN_ERR PFX "The CIS value of Prism2 PC "
+ "card is unexpected\n");
+ err = -EIO;
+ goto fail;
+ }
+ }
+
+ err = register_netdev(dev);
+ if (err) {
+ printk(KERN_ERR PFX "Cannot register network device\n");
+ goto fail;
+ }
+
+ pci_set_drvdata(pdev, dev);
+
+ return 0;
+
+ fail:
+ free_irq(pdev->irq, dev);
+
+ fail_irq:
+ pci_set_drvdata(pdev, NULL);
+ free_orinocodev(dev);
+
+ fail_alloc:
+ pci_iounmap(pdev, mem);
+
+ fail_map_io:
+ iounmap(attr_mem);
+
+ fail_map_attr:
+ pci_release_regions(pdev);
+
+ fail_resources:
+ pci_disable_device(pdev);
+
+ return err;
+}
+
+static void __devexit orinoco_plx_remove_one(struct pci_dev *pdev)
+{
+ struct net_device *dev = pci_get_drvdata(pdev);
+ struct orinoco_private *priv = netdev_priv(dev);
+ struct orinoco_plx_card *card = priv->card;
+ u8 __iomem *attr_mem = card->attr_mem;
+
+ BUG_ON(! dev);
+
+ unregister_netdev(dev);
+ free_irq(dev->irq, dev);
+ pci_set_drvdata(pdev, NULL);
+ free_orinocodev(dev);
+ pci_iounmap(pdev, priv->hw.iobase);
+ iounmap(attr_mem);
+ pci_release_regions(pdev);
+ pci_disable_device(pdev);
+}
+
+
+static struct pci_device_id orinoco_plx_pci_id_table[] = {
+ {0x111a, 0x1023, PCI_ANY_ID, PCI_ANY_ID,}, /* Siemens SpeedStream SS1023 */
+ {0x1385, 0x4100, PCI_ANY_ID, PCI_ANY_ID,}, /* Netgear MA301 */
+ {0x15e8, 0x0130, PCI_ANY_ID, PCI_ANY_ID,}, /* Correga - does this work? */
+ {0x1638, 0x1100, PCI_ANY_ID, PCI_ANY_ID,}, /* SMC EZConnect SMC2602W,
+ Eumitcom PCI WL11000,
+ Addtron AWA-100 */
+ {0x16ab, 0x1100, PCI_ANY_ID, PCI_ANY_ID,}, /* Global Sun Tech GL24110P */
+ {0x16ab, 0x1101, PCI_ANY_ID, PCI_ANY_ID,}, /* Reported working, but unknown */
+ {0x16ab, 0x1102, PCI_ANY_ID, PCI_ANY_ID,}, /* Linksys WDT11 */
+ {0x16ec, 0x3685, PCI_ANY_ID, PCI_ANY_ID,}, /* USR 2415 */
+ {0xec80, 0xec00, PCI_ANY_ID, PCI_ANY_ID,}, /* Belkin F5D6000 tested by
+ Brendan W. McAdams <rit AT jacked-in.org> */
+ {0x10b7, 0x7770, PCI_ANY_ID, PCI_ANY_ID,}, /* 3Com AirConnect PCI tested by
+ Damien Persohn <damien AT persohn.net> */
+ {0,},
+};
+
+MODULE_DEVICE_TABLE(pci, orinoco_plx_pci_id_table);
+
+static struct pci_driver orinoco_plx_driver = {
+ .name = DRIVER_NAME,
+ .id_table = orinoco_plx_pci_id_table,
+ .probe = orinoco_plx_init_one,
+ .remove = __devexit_p(orinoco_plx_remove_one),
+};
+
+static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION
+ " (Pavel Roskin <proski@gnu.org>,"
+ " David Gibson <hermes@gibson.dropbear.id.au>,"
+ " Daniel Barlow <dan@telent.net>)";
+MODULE_AUTHOR("Daniel Barlow <dan@telent.net>");
+MODULE_DESCRIPTION("Driver for wireless LAN cards using the PLX9052 PCI bridge");
+MODULE_LICENSE("Dual MPL/GPL");
+
+static int __init orinoco_plx_init(void)
+{
+ printk(KERN_DEBUG "%s\n", version);
+ return pci_module_init(&orinoco_plx_driver);
+}
+
+static void __exit orinoco_plx_exit(void)
+{
+ pci_unregister_driver(&orinoco_plx_driver);
+ ssleep(1);
+}
+
+module_init(orinoco_plx_init);
+module_exit(orinoco_plx_exit);
+
+/*
+ * Local variables:
+ * c-indent-level: 8
+ * c-basic-offset: 8
+ * tab-width: 8
+ * End:
+ */
diff --git a/drivers/net/wireless/orinoco_tmd.c b/drivers/net/wireless/orinoco_tmd.c
new file mode 100644
index 0000000..85893f4
--- /dev/null
+++ b/drivers/net/wireless/orinoco_tmd.c
@@ -0,0 +1,276 @@
+/* orinoco_tmd.c
+ *
+ * Driver for Prism II devices which would usually be driven by orinoco_cs,
+ * but are connected to the PCI bus by a TMD7160.
+ *
+ * Copyright (C) 2003 Joerg Dorchain <joerg AT dorchain.net>
+ * based heavily upon orinoco_plx.c Copyright (C) 2001 Daniel Barlow
+ *
+ * The contents of this file are subject to the Mozilla Public License
+ * Version 1.1 (the "License"); you may not use this file except in
+ * compliance with the License. You may obtain a copy of the License
+ * at http://www.mozilla.org/MPL/
+ *
+ * Software distributed under the License is distributed on an "AS IS"
+ * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
+ * the License for the specific language governing rights and
+ * limitations under the License.
+ *
+ * Alternatively, the contents of this file may be used under the
+ * terms of the GNU General Public License version 2 (the "GPL"), in
+ * which case the provisions of the GPL are applicable instead of the
+ * above. If you wish to allow the use of your version of this file
+ * only under the terms of the GPL and not to allow others to use your
+ * version of this file under the MPL, indicate your decision by
+ * deleting the provisions above and replace them with the notice and
+ * other provisions required by the GPL. If you do not delete the
+ * provisions above, a recipient may use your version of this file
+ * under either the MPL or the GPL.
+
+ * Caution: this is experimental and probably buggy. For success and
+ * failure reports for different cards and adaptors, see
+ * orinoco_tmd_pci_id_table near the end of the file. If you have a
+ * card we don't have the PCI id for, and looks like it should work,
+ * drop me mail with the id and "it works"/"it doesn't work".
+ *
+ * Note: if everything gets detected fine but it doesn't actually send
+ * or receive packets, your first port of call should probably be to
+ * try newer firmware in the card. Especially if you're doing Ad-Hoc
+ * modes
+ *
+ * The actual driving is done by orinoco.c, this is just resource
+ * allocation stuff.
+ *
+ * This driver is modeled after the orinoco_plx driver. The main
+ * difference is that the TMD chip has only IO port ranges and no
+ * memory space, i.e. no access to the CIS. Compared to the PLX chip,
+ * the io range functionalities are exchanged.
+ *
+ * Pheecom sells cards with the TMD chip as "ASIC version"
+ */
+
+#define DRIVER_NAME "orinoco_tmd"
+#define PFX DRIVER_NAME ": "
+
+#include <linux/config.h>
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/ioport.h>
+#include <asm/uaccess.h>
+#include <asm/io.h>
+#include <asm/system.h>
+#include <linux/netdevice.h>
+#include <linux/if_arp.h>
+#include <linux/etherdevice.h>
+#include <linux/list.h>
+#include <linux/pci.h>
+#include <linux/fcntl.h>
+
+#include <pcmcia/cisreg.h>
+
+#include "hermes.h"
+#include "orinoco.h"
+
+#define COR_VALUE (COR_LEVEL_REQ | COR_FUNC_ENA) /* Enable PC card with interrupt in level trigger */
+#define COR_RESET (0x80) /* reset bit in the COR register */
+#define TMD_RESET_TIME (500) /* milliseconds */
+
+/* Orinoco TMD specific data */
+struct orinoco_tmd_card {
+ u32 tmd_io;
+};
+
+
+/*
+ * Do a soft reset of the card using the Configuration Option Register
+ */
+static int orinoco_tmd_cor_reset(struct orinoco_private *priv)
+{
+ hermes_t *hw = &priv->hw;
+ struct orinoco_tmd_card *card = priv->card;
+ u32 addr = card->tmd_io;
+ unsigned long timeout;
+ u16 reg;
+
+ outb(COR_VALUE | COR_RESET, addr);
+ mdelay(1);
+
+ outb(COR_VALUE, addr);
+ mdelay(1);
+
+ /* Just in case, wait more until the card is no longer busy */
+ timeout = jiffies + (TMD_RESET_TIME * HZ / 1000);
+ reg = hermes_read_regn(hw, CMD);
+ while (time_before(jiffies, timeout) && (reg & HERMES_CMD_BUSY)) {
+ mdelay(1);
+ reg = hermes_read_regn(hw, CMD);
+ }
+
+ /* Did we timeout ? */
+ if (reg & HERMES_CMD_BUSY) {
+ printk(KERN_ERR PFX "Busy timeout\n");
+ return -ETIMEDOUT;
+ }
+
+ return 0;
+}
+
+
+static int orinoco_tmd_init_one(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ int err = 0;
+ struct orinoco_private *priv = NULL;
+ struct orinoco_tmd_card *card;
+ struct net_device *dev = NULL;
+ void __iomem *mem;
+
+ err = pci_enable_device(pdev);
+ if (err) {
+ printk(KERN_ERR PFX "Cannot enable PCI device\n");
+ return err;
+ }
+
+ err = pci_request_regions(pdev, DRIVER_NAME);
+ if (err != 0) {
+ printk(KERN_ERR PFX "Cannot obtain PCI resources\n");
+ goto fail_resources;
+ }
+
+ mem = pci_iomap(pdev, 2, 0);
+ if (! mem) {
+ err = -ENOMEM;
+ goto fail_iomap;
+ }
+
+ /* Allocate network device */
+ dev = alloc_orinocodev(sizeof(*card), orinoco_tmd_cor_reset);
+ if (! dev) {
+ printk(KERN_ERR PFX "Cannot allocate network device\n");
+ err = -ENOMEM;
+ goto fail_alloc;
+ }
+
+ priv = netdev_priv(dev);
+ card = priv->card;
+ card->tmd_io = pci_resource_start(pdev, 1);
+ dev->base_addr = pci_resource_start(pdev, 2);
+ SET_MODULE_OWNER(dev);
+ SET_NETDEV_DEV(dev, &pdev->dev);
+
+ hermes_struct_init(&priv->hw, mem, HERMES_16BIT_REGSPACING);
+
+ printk(KERN_DEBUG PFX "Detected Orinoco/Prism2 TMD device "
+ "at %s irq:%d, io addr:0x%lx\n", pci_name(pdev), pdev->irq,
+ dev->base_addr);
+
+ err = request_irq(pdev->irq, orinoco_interrupt, SA_SHIRQ,
+ dev->name, dev);
+ if (err) {
+ printk(KERN_ERR PFX "Cannot allocate IRQ %d\n", pdev->irq);
+ err = -EBUSY;
+ goto fail_irq;
+ }
+ dev->irq = pdev->irq;
+
+ err = orinoco_tmd_cor_reset(priv);
+ if (err) {
+ printk(KERN_ERR PFX "Initial reset failed\n");
+ goto fail;
+ }
+
+ err = register_netdev(dev);
+ if (err) {
+ printk(KERN_ERR PFX "Cannot register network device\n");
+ goto fail;
+ }
+
+ pci_set_drvdata(pdev, dev);
+
+ return 0;
+
+ fail:
+ free_irq(pdev->irq, dev);
+
+ fail_irq:
+ pci_set_drvdata(pdev, NULL);
+ free_orinocodev(dev);
+
+ fail_alloc:
+ pci_iounmap(pdev, mem);
+
+ fail_iomap:
+ pci_release_regions(pdev);
+
+ fail_resources:
+ pci_disable_device(pdev);
+
+ return err;
+}
+
+static void __devexit orinoco_tmd_remove_one(struct pci_dev *pdev)
+{
+ struct net_device *dev = pci_get_drvdata(pdev);
+ struct orinoco_private *priv = dev->priv;
+
+ BUG_ON(! dev);
+
+ unregister_netdev(dev);
+ free_irq(dev->irq, dev);
+ pci_set_drvdata(pdev, NULL);
+ free_orinocodev(dev);
+ pci_iounmap(pdev, priv->hw.iobase);
+ pci_release_regions(pdev);
+ pci_disable_device(pdev);
+}
+
+
+static struct pci_device_id orinoco_tmd_pci_id_table[] = {
+ {0x15e8, 0x0131, PCI_ANY_ID, PCI_ANY_ID,}, /* NDC and OEMs, e.g. pheecom */
+ {0,},
+};
+
+MODULE_DEVICE_TABLE(pci, orinoco_tmd_pci_id_table);
+
+static struct pci_driver orinoco_tmd_driver = {
+ .name = DRIVER_NAME,
+ .id_table = orinoco_tmd_pci_id_table,
+ .probe = orinoco_tmd_init_one,
+ .remove = __devexit_p(orinoco_tmd_remove_one),
+};
+
+static char version[] __initdata = DRIVER_NAME " " DRIVER_VERSION
+ " (Joerg Dorchain <joerg@dorchain.net>)";
+MODULE_AUTHOR("Joerg Dorchain <joerg@dorchain.net>");
+MODULE_DESCRIPTION("Driver for wireless LAN cards using the TMD7160 PCI bridge");
+MODULE_LICENSE("Dual MPL/GPL");
+
+static int __init orinoco_tmd_init(void)
+{
+ printk(KERN_DEBUG "%s\n", version);
+ return pci_module_init(&orinoco_tmd_driver);
+}
+
+static void __exit orinoco_tmd_exit(void)
+{
+ pci_unregister_driver(&orinoco_tmd_driver);
+ ssleep(1);
+}
+
+module_init(orinoco_tmd_init);
+module_exit(orinoco_tmd_exit);
+
+/*
+ * Local variables:
+ * c-indent-level: 8
+ * c-basic-offset: 8
+ * tab-width: 8
+ * End:
+ */
diff --git a/drivers/net/wireless/prism54/Makefile b/drivers/net/wireless/prism54/Makefile
new file mode 100644
index 0000000..fad305c
--- /dev/null
+++ b/drivers/net/wireless/prism54/Makefile
@@ -0,0 +1,8 @@
+# $Id: Makefile.k26,v 1.7 2004/01/30 16:24:00 ajfa Exp $
+
+prism54-objs := islpci_eth.o islpci_mgt.o \
+ isl_38xx.o isl_ioctl.o islpci_dev.o \
+ islpci_hotplug.o oid_mgt.o
+
+obj-$(CONFIG_PRISM54) += prism54.o
+
diff --git a/drivers/net/wireless/prism54/isl_38xx.c b/drivers/net/wireless/prism54/isl_38xx.c
new file mode 100644
index 0000000..4481ec1
--- /dev/null
+++ b/drivers/net/wireless/prism54/isl_38xx.c
@@ -0,0 +1,260 @@
+/*
+ *
+ * Copyright (C) 2002 Intersil Americas Inc.
+ * Copyright (C) 2003-2004 Luis R. Rodriguez <mcgrof@ruslug.rutgers.edu>_
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <linux/version.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/delay.h>
+
+#include <asm/uaccess.h>
+#include <asm/io.h>
+
+#include "prismcompat.h"
+#include "isl_38xx.h"
+#include "islpci_dev.h"
+#include "islpci_mgt.h"
+
+/******************************************************************************
+ Device Interface & Control functions
+******************************************************************************/
+
+/**
+ * isl38xx_disable_interrupts - disable all interrupts
+ * @device: pci memory base address
+ *
+ * Instructs the device to disable all interrupt reporting by asserting
+ * the IRQ line. New events may still show up in the interrupt identification
+ * register located at offset %ISL38XX_INT_IDENT_REG.
+ */
+void
+isl38xx_disable_interrupts(void __iomem *device)
+{
+ isl38xx_w32_flush(device, 0x00000000, ISL38XX_INT_EN_REG);
+ udelay(ISL38XX_WRITEIO_DELAY);
+}
+
+void
+isl38xx_handle_sleep_request(isl38xx_control_block *control_block,
+ int *powerstate, void __iomem *device_base)
+{
+ /* device requests to go into sleep mode
+ * check whether the transmit queues for data and management are empty */
+ if (isl38xx_in_queue(control_block, ISL38XX_CB_TX_DATA_LQ))
+ /* data tx queue not empty */
+ return;
+
+ if (isl38xx_in_queue(control_block, ISL38XX_CB_TX_MGMTQ))
+ /* management tx queue not empty */
+ return;
+
+ /* check also whether received frames are pending */
+ if (isl38xx_in_queue(control_block, ISL38XX_CB_RX_DATA_LQ))
+ /* data rx queue not empty */
+ return;
+
+ if (isl38xx_in_queue(control_block, ISL38XX_CB_RX_MGMTQ))
+ /* management rx queue not empty */
+ return;
+
+#if VERBOSE > SHOW_ERROR_MESSAGES
+ DEBUG(SHOW_TRACING, "Device going to sleep mode\n");
+#endif
+
+ /* all queues are empty, allow the device to go into sleep mode */
+ *powerstate = ISL38XX_PSM_POWERSAVE_STATE;
+
+ /* assert the Sleep interrupt in the Device Interrupt Register */
+ isl38xx_w32_flush(device_base, ISL38XX_DEV_INT_SLEEP,
+ ISL38XX_DEV_INT_REG);
+ udelay(ISL38XX_WRITEIO_DELAY);
+}
+
+void
+isl38xx_handle_wakeup(isl38xx_control_block *control_block,
+ int *powerstate, void __iomem *device_base)
+{
+ /* device is in active state, update the powerstate flag */
+ *powerstate = ISL38XX_PSM_ACTIVE_STATE;
+
+ /* now check whether there are frames pending for the card */
+ if (!isl38xx_in_queue(control_block, ISL38XX_CB_TX_DATA_LQ)
+ && !isl38xx_in_queue(control_block, ISL38XX_CB_TX_MGMTQ))
+ return;
+
+#if VERBOSE > SHOW_ERROR_MESSAGES
+ DEBUG(SHOW_ANYTHING, "Wake up handler trigger the device\n");
+#endif
+
+ /* either data or management transmit queue has a frame pending
+ * trigger the device by setting the Update bit in the Device Int reg */
+ isl38xx_w32_flush(device_base, ISL38XX_DEV_INT_UPDATE,
+ ISL38XX_DEV_INT_REG);
+ udelay(ISL38XX_WRITEIO_DELAY);
+}
+
+void
+isl38xx_trigger_device(int asleep, void __iomem *device_base)
+{
+ struct timeval current_time;
+ u32 reg, counter = 0;
+
+#if VERBOSE > SHOW_ERROR_MESSAGES
+ DEBUG(SHOW_FUNCTION_CALLS, "isl38xx trigger device\n");
+#endif
+
+ /* check whether the device is in power save mode */
+ if (asleep) {
+ /* device is in powersave, trigger the device for wakeup */
+#if VERBOSE > SHOW_ERROR_MESSAGES
+ do_gettimeofday(¤t_time);
+ DEBUG(SHOW_TRACING, "%08li.%08li Device wakeup triggered\n",
+ current_time.tv_sec, (long)current_time.tv_usec);
+#endif
+
+ DEBUG(SHOW_TRACING, "%08li.%08li Device register read %08x\n",
+ current_time.tv_sec, (long)current_time.tv_usec,
+ readl(device_base + ISL38XX_CTRL_STAT_REG));
+ udelay(ISL38XX_WRITEIO_DELAY);
+
+ reg = readl(device_base + ISL38XX_INT_IDENT_REG);
+ if (reg == 0xabadface) {
+#if VERBOSE > SHOW_ERROR_MESSAGES
+ do_gettimeofday(¤t_time);
+ DEBUG(SHOW_TRACING,
+ "%08li.%08li Device register abadface\n",
+ current_time.tv_sec, (long)current_time.tv_usec);
+#endif
+ /* read the Device Status Register until Sleepmode bit is set */
+ while (reg = readl(device_base + ISL38XX_CTRL_STAT_REG),
+ (reg & ISL38XX_CTRL_STAT_SLEEPMODE) == 0) {
+ udelay(ISL38XX_WRITEIO_DELAY);
+ counter++;
+ }
+
+ DEBUG(SHOW_TRACING,
+ "%08li.%08li Device register read %08x\n",
+ current_time.tv_sec, (long)current_time.tv_usec,
+ readl(device_base + ISL38XX_CTRL_STAT_REG));
+ udelay(ISL38XX_WRITEIO_DELAY);
+
+#if VERBOSE > SHOW_ERROR_MESSAGES
+ do_gettimeofday(¤t_time);
+ DEBUG(SHOW_TRACING,
+ "%08li.%08li Device asleep counter %i\n",
+ current_time.tv_sec, (long)current_time.tv_usec,
+ counter);
+#endif
+ }
+ /* assert the Wakeup interrupt in the Device Interrupt Register */
+ isl38xx_w32_flush(device_base, ISL38XX_DEV_INT_WAKEUP,
+ ISL38XX_DEV_INT_REG);
+ udelay(ISL38XX_WRITEIO_DELAY);
+
+ /* perform another read on the Device Status Register */
+ reg = readl(device_base + ISL38XX_CTRL_STAT_REG);
+ udelay(ISL38XX_WRITEIO_DELAY);
+
+#if VERBOSE > SHOW_ERROR_MESSAGES
+ do_gettimeofday(¤t_time);
+ DEBUG(SHOW_TRACING, "%08li.%08li Device register read %08x\n",
+ current_time.tv_sec, (long)current_time.tv_usec, reg);
+#endif
+ } else {
+ /* device is (still) awake */
+#if VERBOSE > SHOW_ERROR_MESSAGES
+ DEBUG(SHOW_TRACING, "Device is in active state\n");
+#endif
+ /* trigger the device by setting the Update bit in the Device Int reg */
+
+ isl38xx_w32_flush(device_base, ISL38XX_DEV_INT_UPDATE,
+ ISL38XX_DEV_INT_REG);
+ udelay(ISL38XX_WRITEIO_DELAY);
+ }
+}
+
+void
+isl38xx_interface_reset(void __iomem *device_base, dma_addr_t host_address)
+{
+#if VERBOSE > SHOW_ERROR_MESSAGES
+ DEBUG(SHOW_FUNCTION_CALLS, "isl38xx_interface_reset\n");
+#endif
+
+ /* load the address of the control block in the device */
+ isl38xx_w32_flush(device_base, host_address, ISL38XX_CTRL_BLK_BASE_REG);
+ udelay(ISL38XX_WRITEIO_DELAY);
+
+ /* set the reset bit in the Device Interrupt Register */
+ isl38xx_w32_flush(device_base, ISL38XX_DEV_INT_RESET, ISL38XX_DEV_INT_REG);
+ udelay(ISL38XX_WRITEIO_DELAY);
+
+ /* enable the interrupt for detecting initialization */
+
+ /* Note: Do not enable other interrupts here. We want the
+ * device to have come up first 100% before allowing any other
+ * interrupts. */
+ isl38xx_w32_flush(device_base, ISL38XX_INT_IDENT_INIT, ISL38XX_INT_EN_REG);
+ udelay(ISL38XX_WRITEIO_DELAY); /* allow complete full reset */
+}
+
+void
+isl38xx_enable_common_interrupts(void __iomem *device_base) {
+ u32 reg;
+ reg = ( ISL38XX_INT_IDENT_UPDATE |
+ ISL38XX_INT_IDENT_SLEEP | ISL38XX_INT_IDENT_WAKEUP);
+ isl38xx_w32_flush(device_base, reg, ISL38XX_INT_EN_REG);
+ udelay(ISL38XX_WRITEIO_DELAY);
+}
+
+int
+isl38xx_in_queue(isl38xx_control_block *cb, int queue)
+{
+ const s32 delta = (le32_to_cpu(cb->driver_curr_frag[queue]) -
+ le32_to_cpu(cb->device_curr_frag[queue]));
+
+ /* determine the amount of fragments in the queue depending on the type
+ * of the queue, either transmit or receive */
+
+ BUG_ON(delta < 0); /* driver ptr must be ahead of device ptr */
+
+ switch (queue) {
+ /* send queues */
+ case ISL38XX_CB_TX_MGMTQ:
+ BUG_ON(delta > ISL38XX_CB_MGMT_QSIZE);
+ case ISL38XX_CB_TX_DATA_LQ:
+ case ISL38XX_CB_TX_DATA_HQ:
+ BUG_ON(delta > ISL38XX_CB_TX_QSIZE);
+ return delta;
+ break;
+
+ /* receive queues */
+ case ISL38XX_CB_RX_MGMTQ:
+ BUG_ON(delta > ISL38XX_CB_MGMT_QSIZE);
+ return ISL38XX_CB_MGMT_QSIZE - delta;
+ break;
+
+ case ISL38XX_CB_RX_DATA_LQ:
+ case ISL38XX_CB_RX_DATA_HQ:
+ BUG_ON(delta > ISL38XX_CB_RX_QSIZE);
+ return ISL38XX_CB_RX_QSIZE - delta;
+ break;
+ }
+ BUG();
+ return 0;
+}
diff --git a/drivers/net/wireless/prism54/isl_38xx.h b/drivers/net/wireless/prism54/isl_38xx.h
new file mode 100644
index 0000000..e83e491
--- /dev/null
+++ b/drivers/net/wireless/prism54/isl_38xx.h
@@ -0,0 +1,173 @@
+/*
+ *
+ * Copyright (C) 2002 Intersil Americas Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef _ISL_38XX_H
+#define _ISL_38XX_H
+
+#include <linux/version.h>
+#include <asm/io.h>
+#include <asm/byteorder.h>
+
+#define ISL38XX_CB_RX_QSIZE 8
+#define ISL38XX_CB_TX_QSIZE 32
+
+/* ISL38XX Access Point Specific definitions */
+#define ISL38XX_MAX_WDS_LINKS 8
+
+/* ISL38xx Client Specific definitions */
+#define ISL38XX_PSM_ACTIVE_STATE 0
+#define ISL38XX_PSM_POWERSAVE_STATE 1
+
+/* ISL38XX Host Interface Definitions */
+#define ISL38XX_PCI_MEM_SIZE 0x02000
+#define ISL38XX_MEMORY_WINDOW_SIZE 0x01000
+#define ISL38XX_DEV_FIRMWARE_ADDRES 0x20000
+#define ISL38XX_WRITEIO_DELAY 10 /* in us */
+#define ISL38XX_RESET_DELAY 50 /* in ms */
+#define ISL38XX_WAIT_CYCLE 10 /* in 10ms */
+#define ISL38XX_MAX_WAIT_CYCLES 10
+
+/* PCI Memory Area */
+#define ISL38XX_HARDWARE_REG 0x0000
+#define ISL38XX_CARDBUS_CIS 0x0800
+#define ISL38XX_DIRECT_MEM_WIN 0x1000
+
+/* Hardware registers */
+#define ISL38XX_DEV_INT_REG 0x0000
+#define ISL38XX_INT_IDENT_REG 0x0010
+#define ISL38XX_INT_ACK_REG 0x0014
+#define ISL38XX_INT_EN_REG 0x0018
+#define ISL38XX_GEN_PURP_COM_REG_1 0x0020
+#define ISL38XX_GEN_PURP_COM_REG_2 0x0024
+#define ISL38XX_CTRL_BLK_BASE_REG ISL38XX_GEN_PURP_COM_REG_1
+#define ISL38XX_DIR_MEM_BASE_REG 0x0030
+#define ISL38XX_CTRL_STAT_REG 0x0078
+
+/* High end mobos queue up pci writes, the following
+ * is used to "read" from after a write to force flush */
+#define ISL38XX_PCI_POSTING_FLUSH ISL38XX_INT_EN_REG
+
+/**
+ * isl38xx_w32_flush - PCI iomem write helper
+ * @base: (host) memory base address of the device
+ * @val: 32bit value (host order) to write
+ * @offset: byte offset into @base to write value to
+ *
+ * This helper takes care of writing a 32bit datum to the
+ * specified offset into the device's pci memory space, and making sure
+ * the pci memory buffers get flushed by performing one harmless read
+ * from the %ISL38XX_PCI_POSTING_FLUSH offset.
+ */
+static inline void
+isl38xx_w32_flush(void __iomem *base, u32 val, unsigned long offset)
+{
+ writel(val, base + offset);
+ (void) readl(base + ISL38XX_PCI_POSTING_FLUSH);
+}
+
+/* Device Interrupt register bits */
+#define ISL38XX_DEV_INT_RESET 0x0001
+#define ISL38XX_DEV_INT_UPDATE 0x0002
+#define ISL38XX_DEV_INT_WAKEUP 0x0008
+#define ISL38XX_DEV_INT_SLEEP 0x0010
+
+/* Interrupt Identification/Acknowledge/Enable register bits */
+#define ISL38XX_INT_IDENT_UPDATE 0x0002
+#define ISL38XX_INT_IDENT_INIT 0x0004
+#define ISL38XX_INT_IDENT_WAKEUP 0x0008
+#define ISL38XX_INT_IDENT_SLEEP 0x0010
+#define ISL38XX_INT_SOURCES 0x001E
+
+/* Control/Status register bits */
+/* Looks like there are other meaningful bits
+ 0x20004400 seen in normal operation,
+ 0x200044db at 'timeout waiting for mgmt response'
+*/
+#define ISL38XX_CTRL_STAT_SLEEPMODE 0x00000200
+#define ISL38XX_CTRL_STAT_CLKRUN 0x00800000
+#define ISL38XX_CTRL_STAT_RESET 0x10000000
+#define ISL38XX_CTRL_STAT_RAMBOOT 0x20000000
+#define ISL38XX_CTRL_STAT_STARTHALTED 0x40000000
+#define ISL38XX_CTRL_STAT_HOST_OVERRIDE 0x80000000
+
+/* Control Block definitions */
+#define ISL38XX_CB_RX_DATA_LQ 0
+#define ISL38XX_CB_TX_DATA_LQ 1
+#define ISL38XX_CB_RX_DATA_HQ 2
+#define ISL38XX_CB_TX_DATA_HQ 3
+#define ISL38XX_CB_RX_MGMTQ 4
+#define ISL38XX_CB_TX_MGMTQ 5
+#define ISL38XX_CB_QCOUNT 6
+#define ISL38XX_CB_MGMT_QSIZE 4
+#define ISL38XX_MIN_QTHRESHOLD 4 /* fragments */
+
+/* Memory Manager definitions */
+#define MGMT_FRAME_SIZE 1500 /* >= size struct obj_bsslist */
+#define MGMT_TX_FRAME_COUNT 24 /* max 4 + spare 4 + 8 init */
+#define MGMT_RX_FRAME_COUNT 24 /* 4*4 + spare 8 */
+#define MGMT_FRAME_COUNT (MGMT_TX_FRAME_COUNT + MGMT_RX_FRAME_COUNT)
+#define CONTROL_BLOCK_SIZE 1024 /* should be enough */
+#define PSM_FRAME_SIZE 1536
+#define PSM_MINIMAL_STATION_COUNT 64
+#define PSM_FRAME_COUNT PSM_MINIMAL_STATION_COUNT
+#define PSM_BUFFER_SIZE PSM_FRAME_SIZE * PSM_FRAME_COUNT
+#define MAX_TRAP_RX_QUEUE 4
+#define HOST_MEM_BLOCK CONTROL_BLOCK_SIZE + PSM_BUFFER_SIZE
+
+/* Fragment package definitions */
+#define FRAGMENT_FLAG_MF 0x0001
+#define MAX_FRAGMENT_SIZE 1536
+
+/* In monitor mode frames have a header. I don't know exactly how big those
+ * frame can be but I've never seen any frame bigger than 1584... :
+ */
+#define MAX_FRAGMENT_SIZE_RX 1600
+
+typedef struct {
+ u32 address; /* physical address on host */
+ u16 size; /* packet size */
+ u16 flags; /* set of bit-wise flags */
+} isl38xx_fragment;
+
+struct isl38xx_cb {
+ u32 driver_curr_frag[ISL38XX_CB_QCOUNT];
+ u32 device_curr_frag[ISL38XX_CB_QCOUNT];
+ isl38xx_fragment rx_data_low[ISL38XX_CB_RX_QSIZE];
+ isl38xx_fragment tx_data_low[ISL38XX_CB_TX_QSIZE];
+ isl38xx_fragment rx_data_high[ISL38XX_CB_RX_QSIZE];
+ isl38xx_fragment tx_data_high[ISL38XX_CB_TX_QSIZE];
+ isl38xx_fragment rx_data_mgmt[ISL38XX_CB_MGMT_QSIZE];
+ isl38xx_fragment tx_data_mgmt[ISL38XX_CB_MGMT_QSIZE];
+};
+
+typedef struct isl38xx_cb isl38xx_control_block;
+
+/* determine number of entries currently in queue */
+int isl38xx_in_queue(isl38xx_control_block *cb, int queue);
+
+void isl38xx_disable_interrupts(void __iomem *);
+void isl38xx_enable_common_interrupts(void __iomem *);
+
+void isl38xx_handle_sleep_request(isl38xx_control_block *, int *,
+ void __iomem *);
+void isl38xx_handle_wakeup(isl38xx_control_block *, int *, void __iomem *);
+void isl38xx_trigger_device(int, void __iomem *);
+void isl38xx_interface_reset(void __iomem *, dma_addr_t);
+
+#endif /* _ISL_38XX_H */
diff --git a/drivers/net/wireless/prism54/isl_ioctl.c b/drivers/net/wireless/prism54/isl_ioctl.c
new file mode 100644
index 0000000..0f29a9c
--- /dev/null
+++ b/drivers/net/wireless/prism54/isl_ioctl.c
@@ -0,0 +1,2750 @@
+/*
+ *
+ * Copyright (C) 2002 Intersil Americas Inc.
+ * (C) 2003,2004 Aurelien Alleaume <slts@free.fr>
+ * (C) 2003 Herbert Valerio Riedel <hvr@gnu.org>
+ * (C) 2003 Luis R. Rodriguez <mcgrof@ruslug.rutgers.edu>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <linux/version.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/if_arp.h>
+#include <linux/pci.h>
+
+#include <asm/uaccess.h>
+
+#include "prismcompat.h"
+#include "isl_ioctl.h"
+#include "islpci_mgt.h"
+#include "isl_oid.h" /* additional types and defs for isl38xx fw */
+#include "oid_mgt.h"
+
+#include <net/iw_handler.h> /* New driver API */
+
+
+static void prism54_wpa_ie_add(islpci_private *priv, u8 *bssid,
+ u8 *wpa_ie, size_t wpa_ie_len);
+static size_t prism54_wpa_ie_get(islpci_private *priv, u8 *bssid, u8 *wpa_ie);
+static int prism54_set_wpa(struct net_device *, struct iw_request_info *,
+ __u32 *, char *);
+
+
+/**
+ * prism54_mib_mode_helper - MIB change mode helper function
+ * @mib: the &struct islpci_mib object to modify
+ * @iw_mode: new mode (%IW_MODE_*)
+ *
+ * This is a helper function, hence it does not lock. Make sure
+ * caller deals with locking *if* necessary. This function sets the
+ * mode-dependent mib values and does the mapping of the Linux
+ * Wireless API modes to Device firmware modes. It also checks for
+ * correct valid Linux wireless modes.
+ */
+static int
+prism54_mib_mode_helper(islpci_private *priv, u32 iw_mode)
+{
+ u32 config = INL_CONFIG_MANUALRUN;
+ u32 mode, bsstype;
+
+ /* For now, just catch early the Repeater and Secondary modes here */
+ if (iw_mode == IW_MODE_REPEAT || iw_mode == IW_MODE_SECOND) {
+ printk(KERN_DEBUG
+ "%s(): Sorry, Repeater mode and Secondary mode "
+ "are not yet supported by this driver.\n", __FUNCTION__);
+ return -EINVAL;
+ }
+
+ priv->iw_mode = iw_mode;
+
+ switch (iw_mode) {
+ case IW_MODE_AUTO:
+ mode = INL_MODE_CLIENT;
+ bsstype = DOT11_BSSTYPE_ANY;
+ break;
+ case IW_MODE_ADHOC:
+ mode = INL_MODE_CLIENT;
+ bsstype = DOT11_BSSTYPE_IBSS;
+ break;
+ case IW_MODE_INFRA:
+ mode = INL_MODE_CLIENT;
+ bsstype = DOT11_BSSTYPE_INFRA;
+ break;
+ case IW_MODE_MASTER:
+ mode = INL_MODE_AP;
+ bsstype = DOT11_BSSTYPE_INFRA;
+ break;
+ case IW_MODE_MONITOR:
+ mode = INL_MODE_PROMISCUOUS;
+ bsstype = DOT11_BSSTYPE_ANY;
+ config |= INL_CONFIG_RXANNEX;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ if (init_wds)
+ config |= INL_CONFIG_WDS;
+ mgt_set(priv, DOT11_OID_BSSTYPE, &bsstype);
+ mgt_set(priv, OID_INL_CONFIG, &config);
+ mgt_set(priv, OID_INL_MODE, &mode);
+
+ return 0;
+}
+
+/**
+ * prism54_mib_init - fill MIB cache with defaults
+ *
+ * this function initializes the struct given as @mib with defaults,
+ * of which many are retrieved from the global module parameter
+ * variables.
+ */
+
+void
+prism54_mib_init(islpci_private *priv)
+{
+ u32 channel, authen, wep, filter, dot1x, mlme, conformance, power, mode;
+ struct obj_buffer psm_buffer = {
+ .size = PSM_BUFFER_SIZE,
+ .addr = priv->device_psm_buffer
+ };
+
+ channel = CARD_DEFAULT_CHANNEL;
+ authen = CARD_DEFAULT_AUTHEN;
+ wep = CARD_DEFAULT_WEP;
+ filter = CARD_DEFAULT_FILTER; /* (0) Do not filter un-encrypted data */
+ dot1x = CARD_DEFAULT_DOT1X;
+ mlme = CARD_DEFAULT_MLME_MODE;
+ conformance = CARD_DEFAULT_CONFORMANCE;
+ power = 127;
+ mode = CARD_DEFAULT_IW_MODE;
+
+ mgt_set(priv, DOT11_OID_CHANNEL, &channel);
+ mgt_set(priv, DOT11_OID_AUTHENABLE, &authen);
+ mgt_set(priv, DOT11_OID_PRIVACYINVOKED, &wep);
+ mgt_set(priv, DOT11_OID_PSMBUFFER, &psm_buffer);
+ mgt_set(priv, DOT11_OID_EXUNENCRYPTED, &filter);
+ mgt_set(priv, DOT11_OID_DOT1XENABLE, &dot1x);
+ mgt_set(priv, DOT11_OID_MLMEAUTOLEVEL, &mlme);
+ mgt_set(priv, OID_INL_DOT11D_CONFORMANCE, &conformance);
+ mgt_set(priv, OID_INL_OUTPUTPOWER, &power);
+
+ /* This sets all of the mode-dependent values */
+ prism54_mib_mode_helper(priv, mode);
+}
+
+/* this will be executed outside of atomic context thanks to
+ * schedule_work(), thus we can as well use sleeping semaphore
+ * locking */
+void
+prism54_update_stats(islpci_private *priv)
+{
+ char *data;
+ int j;
+ struct obj_bss bss, *bss2;
+ union oid_res_t r;
+
+ if (down_interruptible(&priv->stats_sem))
+ return;
+
+/* Noise floor.
+ * I'm not sure if the unit is dBm.
+ * Note : If we are not connected, this value seems to be irrelevant. */
+
+ mgt_get_request(priv, DOT11_OID_NOISEFLOOR, 0, NULL, &r);
+ priv->local_iwstatistics.qual.noise = r.u;
+
+/* Get the rssi of the link. To do this we need to retrieve a bss. */
+
+ /* First get the MAC address of the AP we are associated with. */
+ mgt_get_request(priv, DOT11_OID_BSSID, 0, NULL, &r);
+ data = r.ptr;
+
+ /* copy this MAC to the bss */
+ memcpy(bss.address, data, 6);
+ kfree(data);
+
+ /* now ask for the corresponding bss */
+ j = mgt_get_request(priv, DOT11_OID_BSSFIND, 0, (void *) &bss, &r);
+ bss2 = r.ptr;
+ /* report the rssi and use it to calculate
+ * link quality through a signal-noise
+ * ratio */
+ priv->local_iwstatistics.qual.level = bss2->rssi;
+ priv->local_iwstatistics.qual.qual =
+ bss2->rssi - priv->iwstatistics.qual.noise;
+
+ kfree(bss2);
+
+ /* report that the stats are new */
+ priv->local_iwstatistics.qual.updated = 0x7;
+
+/* Rx : unable to decrypt the MPDU */
+ mgt_get_request(priv, DOT11_OID_PRIVRXFAILED, 0, NULL, &r);
+ priv->local_iwstatistics.discard.code = r.u;
+
+/* Tx : Max MAC retries num reached */
+ mgt_get_request(priv, DOT11_OID_MPDUTXFAILED, 0, NULL, &r);
+ priv->local_iwstatistics.discard.retries = r.u;
+
+ up(&priv->stats_sem);
+
+ return;
+}
+
+struct iw_statistics *
+prism54_get_wireless_stats(struct net_device *ndev)
+{
+ islpci_private *priv = netdev_priv(ndev);
+
+ /* If the stats are being updated return old data */
+ if (down_trylock(&priv->stats_sem) == 0) {
+ memcpy(&priv->iwstatistics, &priv->local_iwstatistics,
+ sizeof (struct iw_statistics));
+ /* They won't be marked updated for the next time */
+ priv->local_iwstatistics.qual.updated = 0;
+ up(&priv->stats_sem);
+ } else
+ priv->iwstatistics.qual.updated = 0;
+
+ /* Update our wireless stats, but do not schedule to often
+ * (max 1 HZ) */
+ if ((priv->stats_timestamp == 0) ||
+ time_after(jiffies, priv->stats_timestamp + 1 * HZ)) {
+ schedule_work(&priv->stats_work);
+ priv->stats_timestamp = jiffies;
+ }
+
+ return &priv->iwstatistics;
+}
+
+static int
+prism54_commit(struct net_device *ndev, struct iw_request_info *info,
+ char *cwrq, char *extra)
+{
+ islpci_private *priv = netdev_priv(ndev);
+
+ /* simply re-set the last set SSID, this should commit most stuff */
+
+ /* Commit in Monitor mode is not necessary, also setting essid
+ * in Monitor mode does not make sense and isn't allowed for this
+ * device's firmware */
+ if (priv->iw_mode != IW_MODE_MONITOR)
+ return mgt_set_request(priv, DOT11_OID_SSID, 0, NULL);
+ return 0;
+}
+
+static int
+prism54_get_name(struct net_device *ndev, struct iw_request_info *info,
+ char *cwrq, char *extra)
+{
+ islpci_private *priv = netdev_priv(ndev);
+ char *capabilities;
+ union oid_res_t r;
+ int rvalue;
+
+ if (islpci_get_state(priv) < PRV_STATE_INIT) {
+ strncpy(cwrq, "NOT READY!", IFNAMSIZ);
+ return 0;
+ }
+ rvalue = mgt_get_request(priv, OID_INL_PHYCAPABILITIES, 0, NULL, &r);
+
+ switch (r.u) {
+ case INL_PHYCAP_5000MHZ:
+ capabilities = "IEEE 802.11a/b/g";
+ break;
+ case INL_PHYCAP_FAA:
+ capabilities = "IEEE 802.11b/g - FAA Support";
+ break;
+ case INL_PHYCAP_2400MHZ:
+ default:
+ capabilities = "IEEE 802.11b/g"; /* Default */
+ break;
+ }
+ strncpy(cwrq, capabilities, IFNAMSIZ);
+ return rvalue;
+}
+
+static int
+prism54_set_freq(struct net_device *ndev, struct iw_request_info *info,
+ struct iw_freq *fwrq, char *extra)
+{
+ islpci_private *priv = netdev_priv(ndev);
+ int rvalue;
+ u32 c;
+
+ if (fwrq->m < 1000)
+ /* we have a channel number */
+ c = fwrq->m;
+ else
+ c = (fwrq->e == 1) ? channel_of_freq(fwrq->m / 100000) : 0;
+
+ rvalue = c ? mgt_set_request(priv, DOT11_OID_CHANNEL, 0, &c) : -EINVAL;
+
+ /* Call commit handler */
+ return (rvalue ? rvalue : -EINPROGRESS);
+}
+
+static int
+prism54_get_freq(struct net_device *ndev, struct iw_request_info *info,
+ struct iw_freq *fwrq, char *extra)
+{
+ islpci_private *priv = netdev_priv(ndev);
+ union oid_res_t r;
+ int rvalue;
+
+ rvalue = mgt_get_request(priv, DOT11_OID_CHANNEL, 0, NULL, &r);
+ fwrq->i = r.u;
+ rvalue |= mgt_get_request(priv, DOT11_OID_FREQUENCY, 0, NULL, &r);
+ fwrq->m = r.u;
+ fwrq->e = 3;
+
+ return rvalue;
+}
+
+static int
+prism54_set_mode(struct net_device *ndev, struct iw_request_info *info,
+ __u32 * uwrq, char *extra)
+{
+ islpci_private *priv = netdev_priv(ndev);
+ u32 mlmeautolevel = CARD_DEFAULT_MLME_MODE;
+
+ /* Let's see if the user passed a valid Linux Wireless mode */
+ if (*uwrq > IW_MODE_MONITOR || *uwrq < IW_MODE_AUTO) {
+ printk(KERN_DEBUG
+ "%s: %s() You passed a non-valid init_mode.\n",
+ priv->ndev->name, __FUNCTION__);
+ return -EINVAL;
+ }
+
+ down_write(&priv->mib_sem);
+
+ if (prism54_mib_mode_helper(priv, *uwrq)) {
+ up_write(&priv->mib_sem);
+ return -EOPNOTSUPP;
+ }
+
+ /* the ACL code needs an intermediate mlmeautolevel. The wpa stuff an
+ * extended one.
+ */
+ if ((*uwrq == IW_MODE_MASTER) && (priv->acl.policy != MAC_POLICY_OPEN))
+ mlmeautolevel = DOT11_MLME_INTERMEDIATE;
+ if (priv->wpa)
+ mlmeautolevel = DOT11_MLME_EXTENDED;
+
+ mgt_set(priv, DOT11_OID_MLMEAUTOLEVEL, &mlmeautolevel);
+
+ if (mgt_commit(priv)) {
+ up_write(&priv->mib_sem);
+ return -EIO;
+ }
+ priv->ndev->type = (priv->iw_mode == IW_MODE_MONITOR)
+ ? priv->monitor_type : ARPHRD_ETHER;
+ up_write(&priv->mib_sem);
+
+ return 0;
+}
+
+/* Use mib cache */
+static int
+prism54_get_mode(struct net_device *ndev, struct iw_request_info *info,
+ __u32 * uwrq, char *extra)
+{
+ islpci_private *priv = netdev_priv(ndev);
+
+ BUG_ON((priv->iw_mode < IW_MODE_AUTO) || (priv->iw_mode >
+ IW_MODE_MONITOR));
+ *uwrq = priv->iw_mode;
+
+ return 0;
+}
+
+/* we use DOT11_OID_EDTHRESHOLD. From what I guess the card will not try to
+ * emit data if (sensitivity > rssi - noise) (in dBm).
+ * prism54_set_sens does not seem to work.
+ */
+
+static int
+prism54_set_sens(struct net_device *ndev, struct iw_request_info *info,
+ struct iw_param *vwrq, char *extra)
+{
+ islpci_private *priv = netdev_priv(ndev);
+ u32 sens;
+
+ /* by default the card sets this to 20. */
+ sens = vwrq->disabled ? 20 : vwrq->value;
+
+ return mgt_set_request(priv, DOT11_OID_EDTHRESHOLD, 0, &sens);
+}
+
+static int
+prism54_get_sens(struct net_device *ndev, struct iw_request_info *info,
+ struct iw_param *vwrq, char *extra)
+{
+ islpci_private *priv = netdev_priv(ndev);
+ union oid_res_t r;
+ int rvalue;
+
+ rvalue = mgt_get_request(priv, DOT11_OID_EDTHRESHOLD, 0, NULL, &r);
+
+ vwrq->value = r.u;
+ vwrq->disabled = (vwrq->value == 0);
+ vwrq->fixed = 1;
+
+ return rvalue;
+}
+
+static int
+prism54_get_range(struct net_device *ndev, struct iw_request_info *info,
+ struct iw_point *dwrq, char *extra)
+{
+ struct iw_range *range = (struct iw_range *) extra;
+ islpci_private *priv = netdev_priv(ndev);
+ u8 *data;
+ int i, m, rvalue;
+ struct obj_frequencies *freq;
+ union oid_res_t r;
+
+ memset(range, 0, sizeof (struct iw_range));
+ dwrq->length = sizeof (struct iw_range);
+
+ /* set the wireless extension version number */
+ range->we_version_source = SUPPORTED_WIRELESS_EXT;
+ range->we_version_compiled = WIRELESS_EXT;
+
+ /* Now the encoding capabilities */
+ range->num_encoding_sizes = 3;
+ /* 64(40) bits WEP */
+ range->encoding_size[0] = 5;
+ /* 128(104) bits WEP */
+ range->encoding_size[1] = 13;
+ /* 256 bits for WPA-PSK */
+ range->encoding_size[2] = 32;
+ /* 4 keys are allowed */
+ range->max_encoding_tokens = 4;
+
+ /* we don't know the quality range... */
+ range->max_qual.level = 0;
+ range->max_qual.noise = 0;
+ range->max_qual.qual = 0;
+ /* these value describe an average quality. Needs more tweaking... */
+ range->avg_qual.level = -80; /* -80 dBm */
+ range->avg_qual.noise = 0; /* don't know what to put here */
+ range->avg_qual.qual = 0;
+
+ range->sensitivity = 200;
+
+ /* retry limit capabilities */
+ range->retry_capa = IW_RETRY_LIMIT | IW_RETRY_LIFETIME;
+ range->retry_flags = IW_RETRY_LIMIT;
+ range->r_time_flags = IW_RETRY_LIFETIME;
+
+ /* I don't know the range. Put stupid things here */
+ range->min_retry = 1;
+ range->max_retry = 65535;
+ range->min_r_time = 1024;
+ range->max_r_time = 65535 * 1024;
+
+ /* txpower is supported in dBm's */
+ range->txpower_capa = IW_TXPOW_DBM;
+
+#if WIRELESS_EXT > 16
+ /* Event capability (kernel + driver) */
+ range->event_capa[0] = (IW_EVENT_CAPA_K_0 |
+ IW_EVENT_CAPA_MASK(SIOCGIWTHRSPY) |
+ IW_EVENT_CAPA_MASK(SIOCGIWAP));
+ range->event_capa[1] = IW_EVENT_CAPA_K_1;
+ range->event_capa[4] = IW_EVENT_CAPA_MASK(IWEVCUSTOM);
+#endif /* WIRELESS_EXT > 16 */
+
+ if (islpci_get_state(priv) < PRV_STATE_INIT)
+ return 0;
+
+ /* Request the device for the supported frequencies
+ * not really relevant since some devices will report the 5 GHz band
+ * frequencies even if they don't support them.
+ */
+ rvalue =
+ mgt_get_request(priv, DOT11_OID_SUPPORTEDFREQUENCIES, 0, NULL, &r);
+ freq = r.ptr;
+
+ range->num_channels = freq->nr;
+ range->num_frequency = freq->nr;
+
+ m = min(IW_MAX_FREQUENCIES, (int) freq->nr);
+ for (i = 0; i < m; i++) {
+ range->freq[i].m = freq->mhz[i];
+ range->freq[i].e = 6;
+ range->freq[i].i = channel_of_freq(freq->mhz[i]);
+ }
+ kfree(freq);
+
+ rvalue |= mgt_get_request(priv, DOT11_OID_SUPPORTEDRATES, 0, NULL, &r);
+ data = r.ptr;
+
+ /* We got an array of char. It is NULL terminated. */
+ i = 0;
+ while ((i < IW_MAX_BITRATES) && (*data != 0)) {
+ /* the result must be in bps. The card gives us 500Kbps */
+ range->bitrate[i] = *data * 500000;
+ i++;
+ data++;
+ }
+ range->num_bitrates = i;
+ kfree(r.ptr);
+
+ return rvalue;
+}
+
+/* Set AP address*/
+
+static int
+prism54_set_wap(struct net_device *ndev, struct iw_request_info *info,
+ struct sockaddr *awrq, char *extra)
+{
+ islpci_private *priv = netdev_priv(ndev);
+ char bssid[6];
+ int rvalue;
+
+ if (awrq->sa_family != ARPHRD_ETHER)
+ return -EINVAL;
+
+ /* prepare the structure for the set object */
+ memcpy(&bssid[0], awrq->sa_data, 6);
+
+ /* set the bssid -- does this make sense when in AP mode? */
+ rvalue = mgt_set_request(priv, DOT11_OID_BSSID, 0, &bssid);
+
+ return (rvalue ? rvalue : -EINPROGRESS); /* Call commit handler */
+}
+
+/* get AP address*/
+
+static int
+prism54_get_wap(struct net_device *ndev, struct iw_request_info *info,
+ struct sockaddr *awrq, char *extra)
+{
+ islpci_private *priv = netdev_priv(ndev);
+ union oid_res_t r;
+ int rvalue;
+
+ rvalue = mgt_get_request(priv, DOT11_OID_BSSID, 0, NULL, &r);
+ memcpy(awrq->sa_data, r.ptr, 6);
+ awrq->sa_family = ARPHRD_ETHER;
+ kfree(r.ptr);
+
+ return rvalue;
+}
+
+static int
+prism54_set_scan(struct net_device *dev, struct iw_request_info *info,
+ struct iw_param *vwrq, char *extra)
+{
+ /* hehe the device does this automagicaly */
+ return 0;
+}
+
+/* a little helper that will translate our data into a card independent
+ * format that the Wireless Tools will understand. This was inspired by
+ * the "Aironet driver for 4500 and 4800 series cards" (GPL)
+ */
+
+static char *
+prism54_translate_bss(struct net_device *ndev, char *current_ev,
+ char *end_buf, struct obj_bss *bss, char noise)
+{
+ struct iw_event iwe; /* Temporary buffer */
+ short cap;
+ islpci_private *priv = netdev_priv(ndev);
+
+ /* The first entry must be the MAC address */
+ memcpy(iwe.u.ap_addr.sa_data, bss->address, 6);
+ iwe.u.ap_addr.sa_family = ARPHRD_ETHER;
+ iwe.cmd = SIOCGIWAP;
+ current_ev =
+ iwe_stream_add_event(current_ev, end_buf, &iwe, IW_EV_ADDR_LEN);
+
+ /* The following entries will be displayed in the same order we give them */
+
+ /* The ESSID. */
+ iwe.u.data.length = bss->ssid.length;
+ iwe.u.data.flags = 1;
+ iwe.cmd = SIOCGIWESSID;
+ current_ev = iwe_stream_add_point(current_ev, end_buf,
+ &iwe, bss->ssid.octets);
+
+ /* Capabilities */
+#define CAP_ESS 0x01
+#define CAP_IBSS 0x02
+#define CAP_CRYPT 0x10
+
+ /* Mode */
+ cap = bss->capinfo;
+ iwe.u.mode = 0;
+ if (cap & CAP_ESS)
+ iwe.u.mode = IW_MODE_MASTER;
+ else if (cap & CAP_IBSS)
+ iwe.u.mode = IW_MODE_ADHOC;
+ iwe.cmd = SIOCGIWMODE;
+ if (iwe.u.mode)
+ current_ev =
+ iwe_stream_add_event(current_ev, end_buf, &iwe,
+ IW_EV_UINT_LEN);
+
+ /* Encryption capability */
+ if (cap & CAP_CRYPT)
+ iwe.u.data.flags = IW_ENCODE_ENABLED | IW_ENCODE_NOKEY;
+ else
+ iwe.u.data.flags = IW_ENCODE_DISABLED;
+ iwe.u.data.length = 0;
+ iwe.cmd = SIOCGIWENCODE;
+ current_ev = iwe_stream_add_point(current_ev, end_buf, &iwe, NULL);
+
+ /* Add frequency. (short) bss->channel is the frequency in MHz */
+ iwe.u.freq.m = bss->channel;
+ iwe.u.freq.e = 6;
+ iwe.cmd = SIOCGIWFREQ;
+ current_ev =
+ iwe_stream_add_event(current_ev, end_buf, &iwe, IW_EV_FREQ_LEN);
+
+ /* Add quality statistics */
+ iwe.u.qual.level = bss->rssi;
+ iwe.u.qual.noise = noise;
+ /* do a simple SNR for quality */
+ iwe.u.qual.qual = bss->rssi - noise;
+ iwe.cmd = IWEVQUAL;
+ current_ev =
+ iwe_stream_add_event(current_ev, end_buf, &iwe, IW_EV_QUAL_LEN);
+
+ if (priv->wpa) {
+ u8 wpa_ie[MAX_WPA_IE_LEN];
+ char *buf, *p;
+ size_t wpa_ie_len;
+ int i;
+
+ wpa_ie_len = prism54_wpa_ie_get(priv, bss->address, wpa_ie);
+ if (wpa_ie_len > 0 &&
+ (buf = kmalloc(wpa_ie_len * 2 + 10, GFP_ATOMIC))) {
+ p = buf;
+ p += sprintf(p, "wpa_ie=");
+ for (i = 0; i < wpa_ie_len; i++) {
+ p += sprintf(p, "%02x", wpa_ie[i]);
+ }
+ memset(&iwe, 0, sizeof (iwe));
+ iwe.cmd = IWEVCUSTOM;
+ iwe.u.data.length = strlen(buf);
+ current_ev = iwe_stream_add_point(current_ev, end_buf,
+ &iwe, buf);
+ kfree(buf);
+ }
+ }
+ return current_ev;
+}
+
+static int
+prism54_get_scan(struct net_device *ndev, struct iw_request_info *info,
+ struct iw_point *dwrq, char *extra)
+{
+ islpci_private *priv = netdev_priv(ndev);
+ int i, rvalue;
+ struct obj_bsslist *bsslist;
+ u32 noise = 0;
+ char *current_ev = extra;
+ union oid_res_t r;
+
+ if (islpci_get_state(priv) < PRV_STATE_INIT) {
+ /* device is not ready, fail gently */
+ dwrq->length = 0;
+ return 0;
+ }
+
+ /* first get the noise value. We will use it to report the link quality */
+ rvalue = mgt_get_request(priv, DOT11_OID_NOISEFLOOR, 0, NULL, &r);
+ noise = r.u;
+
+ /* Ask the device for a list of known bss.
+ * The old API, using SIOCGIWAPLIST, had a hard limit of IW_MAX_AP=64.
+ * The new API, using SIOCGIWSCAN, is only limited by the buffer size.
+ * WE-14->WE-16, the buffer is limited to IW_SCAN_MAX_DATA bytes.
+ * Starting with WE-17, the buffer can be as big as needed.
+ * But the device won't repport anything if you change the value
+ * of IWMAX_BSS=24. */
+
+ rvalue |= mgt_get_request(priv, DOT11_OID_BSSLIST, 0, NULL, &r);
+ bsslist = r.ptr;
+
+ /* ok now, scan the list and translate its info */
+ for (i = 0; i < (int) bsslist->nr; i++) {
+ current_ev = prism54_translate_bss(ndev, current_ev,
+ extra + dwrq->length,
+ &(bsslist->bsslist[i]),
+ noise);
+#if WIRELESS_EXT > 16
+ /* Check if there is space for one more entry */
+ if((extra + dwrq->length - current_ev) <= IW_EV_ADDR_LEN) {
+ /* Ask user space to try again with a bigger buffer */
+ rvalue = -E2BIG;
+ break;
+ }
+#endif /* WIRELESS_EXT > 16 */
+ }
+
+ kfree(bsslist);
+ dwrq->length = (current_ev - extra);
+ dwrq->flags = 0; /* todo */
+
+ return rvalue;
+}
+
+static int
+prism54_set_essid(struct net_device *ndev, struct iw_request_info *info,
+ struct iw_point *dwrq, char *extra)
+{
+ islpci_private *priv = netdev_priv(ndev);
+ struct obj_ssid essid;
+
+ memset(essid.octets, 0, 33);
+
+ /* Check if we were asked for `any' */
+ if (dwrq->flags && dwrq->length) {
+ if (dwrq->length > min(33, IW_ESSID_MAX_SIZE + 1))
+ return -E2BIG;
+ essid.length = dwrq->length - 1;
+ memcpy(essid.octets, extra, dwrq->length);
+ } else
+ essid.length = 0;
+
+ if (priv->iw_mode != IW_MODE_MONITOR)
+ return mgt_set_request(priv, DOT11_OID_SSID, 0, &essid);
+
+ /* If in monitor mode, just save to mib */
+ mgt_set(priv, DOT11_OID_SSID, &essid);
+ return 0;
+
+}
+
+static int
+prism54_get_essid(struct net_device *ndev, struct iw_request_info *info,
+ struct iw_point *dwrq, char *extra)
+{
+ islpci_private *priv = netdev_priv(ndev);
+ struct obj_ssid *essid;
+ union oid_res_t r;
+ int rvalue;
+
+ rvalue = mgt_get_request(priv, DOT11_OID_SSID, 0, NULL, &r);
+ essid = r.ptr;
+
+ if (essid->length) {
+ dwrq->flags = 1; /* set ESSID to ON for Wireless Extensions */
+ /* if it is to big, trunk it */
+ dwrq->length = min(IW_ESSID_MAX_SIZE, essid->length + 1);
+ } else {
+ dwrq->flags = 0;
+ dwrq->length = 0;
+ }
+ essid->octets[essid->length] = '\0';
+ memcpy(extra, essid->octets, dwrq->length);
+ kfree(essid);
+
+ return rvalue;
+}
+
+/* Provides no functionality, just completes the ioctl. In essence this is a
+ * just a cosmetic ioctl.
+ */
+static int
+prism54_set_nick(struct net_device *ndev, struct iw_request_info *info,
+ struct iw_point *dwrq, char *extra)
+{
+ islpci_private *priv = netdev_priv(ndev);
+
+ if (dwrq->length > IW_ESSID_MAX_SIZE)
+ return -E2BIG;
+
+ down_write(&priv->mib_sem);
+ memset(priv->nickname, 0, sizeof (priv->nickname));
+ memcpy(priv->nickname, extra, dwrq->length);
+ up_write(&priv->mib_sem);
+
+ return 0;
+}
+
+static int
+prism54_get_nick(struct net_device *ndev, struct iw_request_info *info,
+ struct iw_point *dwrq, char *extra)
+{
+ islpci_private *priv = netdev_priv(ndev);
+
+ dwrq->length = 0;
+
+ down_read(&priv->mib_sem);
+ dwrq->length = strlen(priv->nickname) + 1;
+ memcpy(extra, priv->nickname, dwrq->length);
+ up_read(&priv->mib_sem);
+
+ return 0;
+}
+
+/* Set the allowed Bitrates */
+
+static int
+prism54_set_rate(struct net_device *ndev,
+ struct iw_request_info *info,
+ struct iw_param *vwrq, char *extra)
+{
+
+ islpci_private *priv = netdev_priv(ndev);
+ u32 rate, profile;
+ char *data;
+ int ret, i;
+ union oid_res_t r;
+
+ if (vwrq->value == -1) {
+ /* auto mode. No limit. */
+ profile = 1;
+ return mgt_set_request(priv, DOT11_OID_PROFILES, 0, &profile);
+ }
+
+ ret = mgt_get_request(priv, DOT11_OID_SUPPORTEDRATES, 0, NULL, &r);
+ if (ret) {
+ kfree(r.ptr);
+ return ret;
+ }
+
+ rate = (u32) (vwrq->value / 500000);
+ data = r.ptr;
+ i = 0;
+
+ while (data[i]) {
+ if (rate && (data[i] == rate)) {
+ break;
+ }
+ if (vwrq->value == i) {
+ break;
+ }
+ data[i] |= 0x80;
+ i++;
+ }
+
+ if (!data[i]) {
+ kfree(r.ptr);
+ return -EINVAL;
+ }
+
+ data[i] |= 0x80;
+ data[i + 1] = 0;
+
+ /* Now, check if we want a fixed or auto value */
+ if (vwrq->fixed) {
+ data[0] = data[i];
+ data[1] = 0;
+ }
+
+/*
+ i = 0;
+ printk("prism54 rate: ");
+ while(data[i]) {
+ printk("%u ", data[i]);
+ i++;
+ }
+ printk("0\n");
+*/
+ profile = -1;
+ ret = mgt_set_request(priv, DOT11_OID_PROFILES, 0, &profile);
+ ret |= mgt_set_request(priv, DOT11_OID_EXTENDEDRATES, 0, data);
+ ret |= mgt_set_request(priv, DOT11_OID_RATES, 0, data);
+
+ kfree(r.ptr);
+
+ return ret;
+}
+
+/* Get the current bit rate */
+static int
+prism54_get_rate(struct net_device *ndev,
+ struct iw_request_info *info,
+ struct iw_param *vwrq, char *extra)
+{
+ islpci_private *priv = netdev_priv(ndev);
+ int rvalue;
+ char *data;
+ union oid_res_t r;
+
+ /* Get the current bit rate */
+ if ((rvalue = mgt_get_request(priv, GEN_OID_LINKSTATE, 0, NULL, &r)))
+ return rvalue;
+ vwrq->value = r.u * 500000;
+
+ /* request the device for the enabled rates */
+ rvalue = mgt_get_request(priv, DOT11_OID_RATES, 0, NULL, &r);
+ if (rvalue) {
+ kfree(r.ptr);
+ return rvalue;
+ }
+ data = r.ptr;
+ vwrq->fixed = (data[0] != 0) && (data[1] == 0);
+ kfree(r.ptr);
+
+ return 0;
+}
+
+static int
+prism54_set_rts(struct net_device *ndev, struct iw_request_info *info,
+ struct iw_param *vwrq, char *extra)
+{
+ islpci_private *priv = netdev_priv(ndev);
+
+ return mgt_set_request(priv, DOT11_OID_RTSTHRESH, 0, &vwrq->value);
+}
+
+static int
+prism54_get_rts(struct net_device *ndev, struct iw_request_info *info,
+ struct iw_param *vwrq, char *extra)
+{
+ islpci_private *priv = netdev_priv(ndev);
+ union oid_res_t r;
+ int rvalue;
+
+ /* get the rts threshold */
+ rvalue = mgt_get_request(priv, DOT11_OID_RTSTHRESH, 0, NULL, &r);
+ vwrq->value = r.u;
+
+ return rvalue;
+}
+
+static int
+prism54_set_frag(struct net_device *ndev, struct iw_request_info *info,
+ struct iw_param *vwrq, char *extra)
+{
+ islpci_private *priv = netdev_priv(ndev);
+
+ return mgt_set_request(priv, DOT11_OID_FRAGTHRESH, 0, &vwrq->value);
+}
+
+static int
+prism54_get_frag(struct net_device *ndev, struct iw_request_info *info,
+ struct iw_param *vwrq, char *extra)
+{
+ islpci_private *priv = netdev_priv(ndev);
+ union oid_res_t r;
+ int rvalue;
+
+ rvalue = mgt_get_request(priv, DOT11_OID_FRAGTHRESH, 0, NULL, &r);
+ vwrq->value = r.u;
+
+ return rvalue;
+}
+
+/* Here we have (min,max) = max retries for (small frames, big frames). Where
+ * big frame <=> bigger than the rts threshold
+ * small frame <=> smaller than the rts threshold
+ * This is not really the behavior expected by the wireless tool but it seems
+ * to be a common behavior in other drivers.
+ */
+
+static int
+prism54_set_retry(struct net_device *ndev, struct iw_request_info *info,
+ struct iw_param *vwrq, char *extra)
+{
+ islpci_private *priv = netdev_priv(ndev);
+ u32 slimit = 0, llimit = 0; /* short and long limit */
+ u32 lifetime = 0;
+ int rvalue = 0;
+
+ if (vwrq->disabled)
+ /* we cannot disable this feature */
+ return -EINVAL;
+
+ if (vwrq->flags & IW_RETRY_LIMIT) {
+ if (vwrq->flags & IW_RETRY_MIN)
+ slimit = vwrq->value;
+ else if (vwrq->flags & IW_RETRY_MAX)
+ llimit = vwrq->value;
+ else {
+ /* we are asked to set both */
+ slimit = vwrq->value;
+ llimit = vwrq->value;
+ }
+ }
+ if (vwrq->flags & IW_RETRY_LIFETIME)
+ /* Wireless tools use us unit while the device uses 1024 us unit */
+ lifetime = vwrq->value / 1024;
+
+ /* now set what is requested */
+ if (slimit)
+ rvalue =
+ mgt_set_request(priv, DOT11_OID_SHORTRETRIES, 0, &slimit);
+ if (llimit)
+ rvalue |=
+ mgt_set_request(priv, DOT11_OID_LONGRETRIES, 0, &llimit);
+ if (lifetime)
+ rvalue |=
+ mgt_set_request(priv, DOT11_OID_MAXTXLIFETIME, 0,
+ &lifetime);
+ return rvalue;
+}
+
+static int
+prism54_get_retry(struct net_device *ndev, struct iw_request_info *info,
+ struct iw_param *vwrq, char *extra)
+{
+ islpci_private *priv = netdev_priv(ndev);
+ union oid_res_t r;
+ int rvalue = 0;
+ vwrq->disabled = 0; /* It cannot be disabled */
+
+ if ((vwrq->flags & IW_RETRY_TYPE) == IW_RETRY_LIFETIME) {
+ /* we are asked for the life time */
+ rvalue =
+ mgt_get_request(priv, DOT11_OID_MAXTXLIFETIME, 0, NULL, &r);
+ vwrq->value = r.u * 1024;
+ vwrq->flags = IW_RETRY_LIFETIME;
+ } else if ((vwrq->flags & IW_RETRY_MAX)) {
+ /* we are asked for the long retry limit */
+ rvalue |=
+ mgt_get_request(priv, DOT11_OID_LONGRETRIES, 0, NULL, &r);
+ vwrq->value = r.u;
+ vwrq->flags = IW_RETRY_LIMIT | IW_RETRY_MAX;
+ } else {
+ /* default. get the short retry limit */
+ rvalue |=
+ mgt_get_request(priv, DOT11_OID_SHORTRETRIES, 0, NULL, &r);
+ vwrq->value = r.u;
+ vwrq->flags = IW_RETRY_LIMIT | IW_RETRY_MIN;
+ }
+
+ return rvalue;
+}
+
+static int
+prism54_set_encode(struct net_device *ndev, struct iw_request_info *info,
+ struct iw_point *dwrq, char *extra)
+{
+ islpci_private *priv = netdev_priv(ndev);
+ int rvalue = 0, force = 0;
+ int authen = DOT11_AUTH_OS, invoke = 0, exunencrypt = 0;
+ union oid_res_t r;
+
+ /* with the new API, it's impossible to get a NULL pointer.
+ * New version of iwconfig set the IW_ENCODE_NOKEY flag
+ * when no key is given, but older versions don't. */
+
+ if (dwrq->length > 0) {
+ /* we have a key to set */
+ int index = (dwrq->flags & IW_ENCODE_INDEX) - 1;
+ int current_index;
+ struct obj_key key = { DOT11_PRIV_WEP, 0, "" };
+
+ /* get the current key index */
+ rvalue = mgt_get_request(priv, DOT11_OID_DEFKEYID, 0, NULL, &r);
+ current_index = r.u;
+ /* Verify that the key is not marked as invalid */
+ if (!(dwrq->flags & IW_ENCODE_NOKEY)) {
+ key.length = dwrq->length > sizeof (key.key) ?
+ sizeof (key.key) : dwrq->length;
+ memcpy(key.key, extra, key.length);
+ if (key.length == 32)
+ /* we want WPA-PSK */
+ key.type = DOT11_PRIV_TKIP;
+ if ((index < 0) || (index > 3))
+ /* no index provided use the current one */
+ index = current_index;
+
+ /* now send the key to the card */
+ rvalue |=
+ mgt_set_request(priv, DOT11_OID_DEFKEYX, index,
+ &key);
+ }
+ /*
+ * If a valid key is set, encryption should be enabled
+ * (user may turn it off later).
+ * This is also how "iwconfig ethX key on" works
+ */
+ if ((index == current_index) && (key.length > 0))
+ force = 1;
+ } else {
+ int index = (dwrq->flags & IW_ENCODE_INDEX) - 1;
+ if ((index >= 0) && (index <= 3)) {
+ /* we want to set the key index */
+ rvalue |=
+ mgt_set_request(priv, DOT11_OID_DEFKEYID, 0,
+ &index);
+ } else {
+ if (!dwrq->flags & IW_ENCODE_MODE) {
+ /* we cannot do anything. Complain. */
+ return -EINVAL;
+ }
+ }
+ }
+ /* now read the flags */
+ if (dwrq->flags & IW_ENCODE_DISABLED) {
+ /* Encoding disabled,
+ * authen = DOT11_AUTH_OS;
+ * invoke = 0;
+ * exunencrypt = 0; */
+ }
+ if (dwrq->flags & IW_ENCODE_OPEN)
+ /* Encode but accept non-encoded packets. No auth */
+ invoke = 1;
+ if ((dwrq->flags & IW_ENCODE_RESTRICTED) || force) {
+ /* Refuse non-encoded packets. Auth */
+ authen = DOT11_AUTH_BOTH;
+ invoke = 1;
+ exunencrypt = 1;
+ }
+ /* do the change if requested */
+ if ((dwrq->flags & IW_ENCODE_MODE) || force) {
+ rvalue |=
+ mgt_set_request(priv, DOT11_OID_AUTHENABLE, 0, &authen);
+ rvalue |=
+ mgt_set_request(priv, DOT11_OID_PRIVACYINVOKED, 0, &invoke);
+ rvalue |=
+ mgt_set_request(priv, DOT11_OID_EXUNENCRYPTED, 0,
+ &exunencrypt);
+ }
+ return rvalue;
+}
+
+static int
+prism54_get_encode(struct net_device *ndev, struct iw_request_info *info,
+ struct iw_point *dwrq, char *extra)
+{
+ islpci_private *priv = netdev_priv(ndev);
+ struct obj_key *key;
+ u32 devindex, index = (dwrq->flags & IW_ENCODE_INDEX) - 1;
+ u32 authen = 0, invoke = 0, exunencrypt = 0;
+ int rvalue;
+ union oid_res_t r;
+
+ /* first get the flags */
+ rvalue = mgt_get_request(priv, DOT11_OID_AUTHENABLE, 0, NULL, &r);
+ authen = r.u;
+ rvalue |= mgt_get_request(priv, DOT11_OID_PRIVACYINVOKED, 0, NULL, &r);
+ invoke = r.u;
+ rvalue |= mgt_get_request(priv, DOT11_OID_EXUNENCRYPTED, 0, NULL, &r);
+ exunencrypt = r.u;
+
+ if (invoke && (authen == DOT11_AUTH_BOTH) && exunencrypt)
+ dwrq->flags = IW_ENCODE_RESTRICTED;
+ else if ((authen == DOT11_AUTH_OS) && !exunencrypt) {
+ if (invoke)
+ dwrq->flags = IW_ENCODE_OPEN;
+ else
+ dwrq->flags = IW_ENCODE_DISABLED;
+ } else
+ /* The card should not work in this state */
+ dwrq->flags = 0;
+
+ /* get the current device key index */
+ rvalue |= mgt_get_request(priv, DOT11_OID_DEFKEYID, 0, NULL, &r);
+ devindex = r.u;
+ /* Now get the key, return it */
+ if ((index < 0) || (index > 3))
+ /* no index provided, use the current one */
+ index = devindex;
+ rvalue |= mgt_get_request(priv, DOT11_OID_DEFKEYX, index, NULL, &r);
+ key = r.ptr;
+ dwrq->length = key->length;
+ memcpy(extra, key->key, dwrq->length);
+ kfree(key);
+ /* return the used key index */
+ dwrq->flags |= devindex + 1;
+
+ return rvalue;
+}
+
+static int
+prism54_get_txpower(struct net_device *ndev, struct iw_request_info *info,
+ struct iw_param *vwrq, char *extra)
+{
+ islpci_private *priv = netdev_priv(ndev);
+ union oid_res_t r;
+ int rvalue;
+
+ rvalue = mgt_get_request(priv, OID_INL_OUTPUTPOWER, 0, NULL, &r);
+ /* intersil firmware operates in 0.25 dBm (1/4 dBm) */
+ vwrq->value = (s32) r.u / 4;
+ vwrq->fixed = 1;
+ /* radio is not turned of
+ * btw: how is possible to turn off only the radio
+ */
+ vwrq->disabled = 0;
+
+ return rvalue;
+}
+
+static int
+prism54_set_txpower(struct net_device *ndev, struct iw_request_info *info,
+ struct iw_param *vwrq, char *extra)
+{
+ islpci_private *priv = netdev_priv(ndev);
+ s32 u = vwrq->value;
+
+ /* intersil firmware operates in 0.25 dBm (1/4) */
+ u *= 4;
+ if (vwrq->disabled) {
+ /* don't know how to disable radio */
+ printk(KERN_DEBUG
+ "%s: %s() disabling radio is not yet supported.\n",
+ priv->ndev->name, __FUNCTION__);
+ return -ENOTSUPP;
+ } else if (vwrq->fixed)
+ /* currently only fixed value is supported */
+ return mgt_set_request(priv, OID_INL_OUTPUTPOWER, 0, &u);
+ else {
+ printk(KERN_DEBUG
+ "%s: %s() auto power will be implemented later.\n",
+ priv->ndev->name, __FUNCTION__);
+ return -ENOTSUPP;
+ }
+}
+
+static int
+prism54_reset(struct net_device *ndev, struct iw_request_info *info,
+ __u32 * uwrq, char *extra)
+{
+ islpci_reset(netdev_priv(ndev), 0);
+
+ return 0;
+}
+
+static int
+prism54_get_oid(struct net_device *ndev, struct iw_request_info *info,
+ struct iw_point *dwrq, char *extra)
+{
+ union oid_res_t r;
+ int rvalue;
+ enum oid_num_t n = dwrq->flags;
+
+ rvalue = mgt_get_request((islpci_private *) ndev->priv, n, 0, NULL, &r);
+ dwrq->length = mgt_response_to_str(n, &r, extra);
+ if ((isl_oid[n].flags & OID_FLAG_TYPE) != OID_TYPE_U32)
+ kfree(r.ptr);
+ return rvalue;
+}
+
+static int
+prism54_set_u32(struct net_device *ndev, struct iw_request_info *info,
+ __u32 * uwrq, char *extra)
+{
+ u32 oid = uwrq[0], u = uwrq[1];
+
+ return mgt_set_request((islpci_private *) ndev->priv, oid, 0, &u);
+}
+
+static int
+prism54_set_raw(struct net_device *ndev, struct iw_request_info *info,
+ struct iw_point *dwrq, char *extra)
+{
+ u32 oid = dwrq->flags;
+
+ return mgt_set_request((islpci_private *) ndev->priv, oid, 0, extra);
+}
+
+void
+prism54_acl_init(struct islpci_acl *acl)
+{
+ sema_init(&acl->sem, 1);
+ INIT_LIST_HEAD(&acl->mac_list);
+ acl->size = 0;
+ acl->policy = MAC_POLICY_OPEN;
+}
+
+static void
+prism54_clear_mac(struct islpci_acl *acl)
+{
+ struct list_head *ptr, *next;
+ struct mac_entry *entry;
+
+ if (down_interruptible(&acl->sem))
+ return;
+
+ if (acl->size == 0) {
+ up(&acl->sem);
+ return;
+ }
+
+ for (ptr = acl->mac_list.next, next = ptr->next;
+ ptr != &acl->mac_list; ptr = next, next = ptr->next) {
+ entry = list_entry(ptr, struct mac_entry, _list);
+ list_del(ptr);
+ kfree(entry);
+ }
+ acl->size = 0;
+ up(&acl->sem);
+}
+
+void
+prism54_acl_clean(struct islpci_acl *acl)
+{
+ prism54_clear_mac(acl);
+}
+
+static int
+prism54_add_mac(struct net_device *ndev, struct iw_request_info *info,
+ struct sockaddr *awrq, char *extra)
+{
+ islpci_private *priv = netdev_priv(ndev);
+ struct islpci_acl *acl = &priv->acl;
+ struct mac_entry *entry;
+ struct sockaddr *addr = (struct sockaddr *) extra;
+
+ if (addr->sa_family != ARPHRD_ETHER)
+ return -EOPNOTSUPP;
+
+ entry = kmalloc(sizeof (struct mac_entry), GFP_KERNEL);
+ if (entry == NULL)
+ return -ENOMEM;
+
+ memcpy(entry->addr, addr->sa_data, ETH_ALEN);
+
+ if (down_interruptible(&acl->sem)) {
+ kfree(entry);
+ return -ERESTARTSYS;
+ }
+ list_add_tail(&entry->_list, &acl->mac_list);
+ acl->size++;
+ up(&acl->sem);
+
+ return 0;
+}
+
+static int
+prism54_del_mac(struct net_device *ndev, struct iw_request_info *info,
+ struct sockaddr *awrq, char *extra)
+{
+ islpci_private *priv = netdev_priv(ndev);
+ struct islpci_acl *acl = &priv->acl;
+ struct mac_entry *entry;
+ struct list_head *ptr;
+ struct sockaddr *addr = (struct sockaddr *) extra;
+
+ if (addr->sa_family != ARPHRD_ETHER)
+ return -EOPNOTSUPP;
+
+ if (down_interruptible(&acl->sem))
+ return -ERESTARTSYS;
+ for (ptr = acl->mac_list.next; ptr != &acl->mac_list; ptr = ptr->next) {
+ entry = list_entry(ptr, struct mac_entry, _list);
+
+ if (memcmp(entry->addr, addr->sa_data, ETH_ALEN) == 0) {
+ list_del(ptr);
+ acl->size--;
+ kfree(entry);
+ up(&acl->sem);
+ return 0;
+ }
+ }
+ up(&acl->sem);
+ return -EINVAL;
+}
+
+static int
+prism54_get_mac(struct net_device *ndev, struct iw_request_info *info,
+ struct iw_point *dwrq, char *extra)
+{
+ islpci_private *priv = netdev_priv(ndev);
+ struct islpci_acl *acl = &priv->acl;
+ struct mac_entry *entry;
+ struct list_head *ptr;
+ struct sockaddr *dst = (struct sockaddr *) extra;
+
+ dwrq->length = 0;
+
+ if (down_interruptible(&acl->sem))
+ return -ERESTARTSYS;
+
+ for (ptr = acl->mac_list.next; ptr != &acl->mac_list; ptr = ptr->next) {
+ entry = list_entry(ptr, struct mac_entry, _list);
+
+ memcpy(dst->sa_data, entry->addr, ETH_ALEN);
+ dst->sa_family = ARPHRD_ETHER;
+ dwrq->length++;
+ dst++;
+ }
+ up(&acl->sem);
+ return 0;
+}
+
+/* Setting policy also clears the MAC acl, even if we don't change the defaut
+ * policy
+ */
+
+static int
+prism54_set_policy(struct net_device *ndev, struct iw_request_info *info,
+ __u32 * uwrq, char *extra)
+{
+ islpci_private *priv = netdev_priv(ndev);
+ struct islpci_acl *acl = &priv->acl;
+ u32 mlmeautolevel;
+
+ prism54_clear_mac(acl);
+
+ if ((*uwrq < MAC_POLICY_OPEN) || (*uwrq > MAC_POLICY_REJECT))
+ return -EINVAL;
+
+ down_write(&priv->mib_sem);
+
+ acl->policy = *uwrq;
+
+ /* the ACL code needs an intermediate mlmeautolevel */
+ if ((priv->iw_mode == IW_MODE_MASTER) &&
+ (acl->policy != MAC_POLICY_OPEN))
+ mlmeautolevel = DOT11_MLME_INTERMEDIATE;
+ else
+ mlmeautolevel = CARD_DEFAULT_MLME_MODE;
+ if (priv->wpa)
+ mlmeautolevel = DOT11_MLME_EXTENDED;
+ mgt_set(priv, DOT11_OID_MLMEAUTOLEVEL, &mlmeautolevel);
+ /* restart the card with our new policy */
+ if (mgt_commit(priv)) {
+ up_write(&priv->mib_sem);
+ return -EIO;
+ }
+ up_write(&priv->mib_sem);
+
+ return 0;
+}
+
+static int
+prism54_get_policy(struct net_device *ndev, struct iw_request_info *info,
+ __u32 * uwrq, char *extra)
+{
+ islpci_private *priv = netdev_priv(ndev);
+ struct islpci_acl *acl = &priv->acl;
+
+ *uwrq = acl->policy;
+
+ return 0;
+}
+
+/* Return 1 only if client should be accepted. */
+
+static int
+prism54_mac_accept(struct islpci_acl *acl, char *mac)
+{
+ struct list_head *ptr;
+ struct mac_entry *entry;
+ int res = 0;
+
+ if (down_interruptible(&acl->sem))
+ return -ERESTARTSYS;
+
+ if (acl->policy == MAC_POLICY_OPEN) {
+ up(&acl->sem);
+ return 1;
+ }
+
+ for (ptr = acl->mac_list.next; ptr != &acl->mac_list; ptr = ptr->next) {
+ entry = list_entry(ptr, struct mac_entry, _list);
+ if (memcmp(entry->addr, mac, ETH_ALEN) == 0) {
+ res = 1;
+ break;
+ }
+ }
+ res = (acl->policy == MAC_POLICY_ACCEPT) ? !res : res;
+ up(&acl->sem);
+
+ return res;
+}
+
+static int
+prism54_kick_all(struct net_device *ndev, struct iw_request_info *info,
+ struct iw_point *dwrq, char *extra)
+{
+ struct obj_mlme *mlme;
+ int rvalue;
+
+ mlme = kmalloc(sizeof (struct obj_mlme), GFP_KERNEL);
+ if (mlme == NULL)
+ return -ENOMEM;
+
+ /* Tell the card to kick every client */
+ mlme->id = 0;
+ rvalue =
+ mgt_set_request(netdev_priv(ndev), DOT11_OID_DISASSOCIATE, 0, mlme);
+ kfree(mlme);
+
+ return rvalue;
+}
+
+static int
+prism54_kick_mac(struct net_device *ndev, struct iw_request_info *info,
+ struct sockaddr *awrq, char *extra)
+{
+ struct obj_mlme *mlme;
+ struct sockaddr *addr = (struct sockaddr *) extra;
+ int rvalue;
+
+ if (addr->sa_family != ARPHRD_ETHER)
+ return -EOPNOTSUPP;
+
+ mlme = kmalloc(sizeof (struct obj_mlme), GFP_KERNEL);
+ if (mlme == NULL)
+ return -ENOMEM;
+
+ /* Tell the card to only kick the corresponding bastard */
+ memcpy(mlme->address, addr->sa_data, ETH_ALEN);
+ mlme->id = -1;
+ rvalue =
+ mgt_set_request(netdev_priv(ndev), DOT11_OID_DISASSOCIATE, 0, mlme);
+
+ kfree(mlme);
+
+ return rvalue;
+}
+
+/* Translate a TRAP oid into a wireless event. Called in islpci_mgt_receive. */
+
+static void
+format_event(islpci_private *priv, char *dest, const char *str,
+ const struct obj_mlme *mlme, u16 *length, int error)
+{
+ const u8 *a = mlme->address;
+ int n = snprintf(dest, IW_CUSTOM_MAX,
+ "%s %s %2.2X:%2.2X:%2.2X:%2.2X:%2.2X:%2.2X %s (%2.2X)",
+ str,
+ ((priv->iw_mode == IW_MODE_MASTER) ? "from" : "to"),
+ a[0], a[1], a[2], a[3], a[4], a[5],
+ (error ? (mlme->code ? " : REJECTED " : " : ACCEPTED ")
+ : ""), mlme->code);
+ BUG_ON(n > IW_CUSTOM_MAX);
+ *length = n;
+}
+
+static void
+send_formatted_event(islpci_private *priv, const char *str,
+ const struct obj_mlme *mlme, int error)
+{
+ union iwreq_data wrqu;
+ char *memptr;
+
+ memptr = kmalloc(IW_CUSTOM_MAX, GFP_KERNEL);
+ if (!memptr)
+ return;
+ wrqu.data.pointer = memptr;
+ wrqu.data.length = 0;
+ format_event(priv, memptr, str, mlme, &wrqu.data.length,
+ error);
+ wireless_send_event(priv->ndev, IWEVCUSTOM, &wrqu, memptr);
+ kfree(memptr);
+}
+
+static void
+send_simple_event(islpci_private *priv, const char *str)
+{
+ union iwreq_data wrqu;
+ char *memptr;
+ int n = strlen(str);
+
+ memptr = kmalloc(IW_CUSTOM_MAX, GFP_KERNEL);
+ if (!memptr)
+ return;
+ BUG_ON(n > IW_CUSTOM_MAX);
+ wrqu.data.pointer = memptr;
+ wrqu.data.length = n;
+ strcpy(memptr, str);
+ wireless_send_event(priv->ndev, IWEVCUSTOM, &wrqu, memptr);
+ kfree(memptr);
+}
+
+static void
+link_changed(struct net_device *ndev, u32 bitrate)
+{
+ islpci_private *priv = netdev_priv(ndev);
+
+ if (bitrate) {
+ if (priv->iw_mode == IW_MODE_INFRA) {
+ union iwreq_data uwrq;
+ prism54_get_wap(ndev, NULL, (struct sockaddr *) &uwrq,
+ NULL);
+ wireless_send_event(ndev, SIOCGIWAP, &uwrq, NULL);
+ } else
+ send_simple_event(netdev_priv(ndev),
+ "Link established");
+ } else
+ send_simple_event(netdev_priv(ndev), "Link lost");
+}
+
+/* Beacon/ProbeResp payload header */
+struct ieee80211_beacon_phdr {
+ u8 timestamp[8];
+ u16 beacon_int;
+ u16 capab_info;
+} __attribute__ ((packed));
+
+#define WLAN_EID_GENERIC 0xdd
+static u8 wpa_oid[4] = { 0x00, 0x50, 0xf2, 1 };
+
+#define MAC2STR(a) (a)[0], (a)[1], (a)[2], (a)[3], (a)[4], (a)[5]
+#define MACSTR "%02x:%02x:%02x:%02x:%02x:%02x"
+
+static void
+prism54_wpa_ie_add(islpci_private *priv, u8 *bssid,
+ u8 *wpa_ie, size_t wpa_ie_len)
+{
+ struct list_head *ptr;
+ struct islpci_bss_wpa_ie *bss = NULL;
+
+ if (wpa_ie_len > MAX_WPA_IE_LEN)
+ wpa_ie_len = MAX_WPA_IE_LEN;
+
+ if (down_interruptible(&priv->wpa_sem))
+ return;
+
+ /* try to use existing entry */
+ list_for_each(ptr, &priv->bss_wpa_list) {
+ bss = list_entry(ptr, struct islpci_bss_wpa_ie, list);
+ if (memcmp(bss->bssid, bssid, ETH_ALEN) == 0) {
+ list_move(&bss->list, &priv->bss_wpa_list);
+ break;
+ }
+ bss = NULL;
+ }
+
+ if (bss == NULL) {
+ /* add a new BSS entry; if max number of entries is already
+ * reached, replace the least recently updated */
+ if (priv->num_bss_wpa >= MAX_BSS_WPA_IE_COUNT) {
+ bss = list_entry(priv->bss_wpa_list.prev,
+ struct islpci_bss_wpa_ie, list);
+ list_del(&bss->list);
+ } else {
+ bss = kmalloc(sizeof (*bss), GFP_ATOMIC);
+ if (bss != NULL) {
+ priv->num_bss_wpa++;
+ memset(bss, 0, sizeof (*bss));
+ }
+ }
+ if (bss != NULL) {
+ memcpy(bss->bssid, bssid, ETH_ALEN);
+ list_add(&bss->list, &priv->bss_wpa_list);
+ }
+ }
+
+ if (bss != NULL) {
+ memcpy(bss->wpa_ie, wpa_ie, wpa_ie_len);
+ bss->wpa_ie_len = wpa_ie_len;
+ bss->last_update = jiffies;
+ } else {
+ printk(KERN_DEBUG "Failed to add BSS WPA entry for " MACSTR
+ "\n", MAC2STR(bssid));
+ }
+
+ /* expire old entries from WPA list */
+ while (priv->num_bss_wpa > 0) {
+ bss = list_entry(priv->bss_wpa_list.prev,
+ struct islpci_bss_wpa_ie, list);
+ if (!time_after(jiffies, bss->last_update + 60 * HZ))
+ break;
+
+ list_del(&bss->list);
+ priv->num_bss_wpa--;
+ kfree(bss);
+ }
+
+ up(&priv->wpa_sem);
+}
+
+static size_t
+prism54_wpa_ie_get(islpci_private *priv, u8 *bssid, u8 *wpa_ie)
+{
+ struct list_head *ptr;
+ struct islpci_bss_wpa_ie *bss = NULL;
+ size_t len = 0;
+
+ if (down_interruptible(&priv->wpa_sem))
+ return 0;
+
+ list_for_each(ptr, &priv->bss_wpa_list) {
+ bss = list_entry(ptr, struct islpci_bss_wpa_ie, list);
+ if (memcmp(bss->bssid, bssid, ETH_ALEN) == 0)
+ break;
+ bss = NULL;
+ }
+ if (bss) {
+ len = bss->wpa_ie_len;
+ memcpy(wpa_ie, bss->wpa_ie, len);
+ }
+ up(&priv->wpa_sem);
+
+ return len;
+}
+
+void
+prism54_wpa_ie_init(islpci_private *priv)
+{
+ INIT_LIST_HEAD(&priv->bss_wpa_list);
+ sema_init(&priv->wpa_sem, 1);
+}
+
+void
+prism54_wpa_ie_clean(islpci_private *priv)
+{
+ struct list_head *ptr, *n;
+
+ list_for_each_safe(ptr, n, &priv->bss_wpa_list) {
+ struct islpci_bss_wpa_ie *bss;
+ bss = list_entry(ptr, struct islpci_bss_wpa_ie, list);
+ kfree(bss);
+ }
+}
+
+static void
+prism54_process_bss_data(islpci_private *priv, u32 oid, u8 *addr,
+ u8 *payload, size_t len)
+{
+ struct ieee80211_beacon_phdr *hdr;
+ u8 *pos, *end;
+
+ if (!priv->wpa)
+ return;
+
+ hdr = (struct ieee80211_beacon_phdr *) payload;
+ pos = (u8 *) (hdr + 1);
+ end = payload + len;
+ while (pos < end) {
+ if (pos + 2 + pos[1] > end) {
+ printk(KERN_DEBUG "Parsing Beacon/ProbeResp failed "
+ "for " MACSTR "\n", MAC2STR(addr));
+ return;
+ }
+ if (pos[0] == WLAN_EID_GENERIC && pos[1] >= 4 &&
+ memcmp(pos + 2, wpa_oid, 4) == 0) {
+ prism54_wpa_ie_add(priv, addr, pos, pos[1] + 2);
+ return;
+ }
+ pos += 2 + pos[1];
+ }
+}
+
+static void
+handle_request(islpci_private *priv, struct obj_mlme *mlme, enum oid_num_t oid)
+{
+ if (((mlme->state == DOT11_STATE_AUTHING) ||
+ (mlme->state == DOT11_STATE_ASSOCING))
+ && mgt_mlme_answer(priv)) {
+ /* Someone is requesting auth and we must respond. Just send back
+ * the trap with error code set accordingly.
+ */
+ mlme->code = prism54_mac_accept(&priv->acl,
+ mlme->address) ? 0 : 1;
+ mgt_set_request(priv, oid, 0, mlme);
+ }
+}
+
+static int
+prism54_process_trap_helper(islpci_private *priv, enum oid_num_t oid,
+ char *data)
+{
+ struct obj_mlme *mlme = (struct obj_mlme *) data;
+ struct obj_mlmeex *mlmeex = (struct obj_mlmeex *) data;
+ struct obj_mlmeex *confirm;
+ u8 wpa_ie[MAX_WPA_IE_LEN];
+ int wpa_ie_len;
+ size_t len = 0; /* u16, better? */
+ u8 *payload = NULL, *pos = NULL;
+ int ret;
+
+ /* I think all trapable objects are listed here.
+ * Some oids have a EX version. The difference is that they are emitted
+ * in DOT11_MLME_EXTENDED mode (set with DOT11_OID_MLMEAUTOLEVEL)
+ * with more info.
+ * The few events already defined by the wireless tools are not really
+ * suited. We use the more flexible custom event facility.
+ */
+
+ if (oid >= DOT11_OID_BEACON) {
+ len = mlmeex->size;
+ payload = pos = mlmeex->data;
+ }
+
+ /* I fear prism54_process_bss_data won't work with big endian data */
+ if ((oid == DOT11_OID_BEACON) || (oid == DOT11_OID_PROBE))
+ prism54_process_bss_data(priv, oid, mlmeex->address,
+ payload, len);
+
+ mgt_le_to_cpu(isl_oid[oid].flags & OID_FLAG_TYPE, (void *) mlme);
+
+ switch (oid) {
+
+ case GEN_OID_LINKSTATE:
+ link_changed(priv->ndev, (u32) *data);
+ break;
+
+ case DOT11_OID_MICFAILURE:
+ send_simple_event(priv, "Mic failure");
+ break;
+
+ case DOT11_OID_DEAUTHENTICATE:
+ send_formatted_event(priv, "DeAuthenticate request", mlme, 0);
+ break;
+
+ case DOT11_OID_AUTHENTICATE:
+ handle_request(priv, mlme, oid);
+ send_formatted_event(priv, "Authenticate request", mlme, 1);
+ break;
+
+ case DOT11_OID_DISASSOCIATE:
+ send_formatted_event(priv, "Disassociate request", mlme, 0);
+ break;
+
+ case DOT11_OID_ASSOCIATE:
+ handle_request(priv, mlme, oid);
+ send_formatted_event(priv, "Associate request", mlme, 1);
+ break;
+
+ case DOT11_OID_REASSOCIATE:
+ handle_request(priv, mlme, oid);
+ send_formatted_event(priv, "ReAssociate request", mlme, 1);
+ break;
+
+ case DOT11_OID_BEACON:
+ send_formatted_event(priv,
+ "Received a beacon from an unkown AP",
+ mlme, 0);
+ break;
+
+ case DOT11_OID_PROBE:
+ /* we received a probe from a client. */
+ send_formatted_event(priv, "Received a probe from client", mlme,
+ 0);
+ break;
+
+ /* Note : "mlme" is actually a "struct obj_mlmeex *" here, but this
+ * is backward compatible layout-wise with "struct obj_mlme".
+ */
+
+ case DOT11_OID_DEAUTHENTICATEEX:
+ send_formatted_event(priv, "DeAuthenticate request", mlme, 0);
+ break;
+
+ case DOT11_OID_AUTHENTICATEEX:
+ handle_request(priv, mlme, oid);
+ send_formatted_event(priv, "Authenticate request (ex)", mlme, 1);
+
+ if (priv->iw_mode != IW_MODE_MASTER
+ && mlmeex->state != DOT11_STATE_AUTHING)
+ break;
+
+ confirm = kmalloc(sizeof(struct obj_mlmeex) + 6, GFP_ATOMIC);
+
+ if (!confirm)
+ break;
+
+ memcpy(&confirm->address, mlmeex->address, ETH_ALEN);
+ printk(KERN_DEBUG "Authenticate from: address:\t%02x:%02x:%02x:%02x:%02x:%02x\n",
+ mlmeex->address[0],
+ mlmeex->address[1],
+ mlmeex->address[2],
+ mlmeex->address[3],
+ mlmeex->address[4],
+ mlmeex->address[5]
+ );
+ confirm->id = -1; /* or mlmeex->id ? */
+ confirm->state = 0; /* not used */
+ confirm->code = 0;
+ confirm->size = 6;
+ confirm->data[0] = 0x00;
+ confirm->data[1] = 0x00;
+ confirm->data[2] = 0x02;
+ confirm->data[3] = 0x00;
+ confirm->data[4] = 0x00;
+ confirm->data[5] = 0x00;
+
+ ret = mgt_set_varlen(priv, DOT11_OID_ASSOCIATEEX, confirm, 6);
+
+ kfree(confirm);
+ if (ret)
+ return ret;
+ break;
+
+ case DOT11_OID_DISASSOCIATEEX:
+ send_formatted_event(priv, "Disassociate request (ex)", mlme, 0);
+ break;
+
+ case DOT11_OID_ASSOCIATEEX:
+ handle_request(priv, mlme, oid);
+ send_formatted_event(priv, "Associate request (ex)", mlme, 1);
+
+ if (priv->iw_mode != IW_MODE_MASTER
+ && mlmeex->state != DOT11_STATE_AUTHING)
+ break;
+
+ confirm = kmalloc(sizeof(struct obj_mlmeex), GFP_ATOMIC);
+
+ if (!confirm)
+ break;
+
+ memcpy(&confirm->address, mlmeex->address, ETH_ALEN);
+
+ confirm->id = ((struct obj_mlmeex *)mlme)->id;
+ confirm->state = 0; /* not used */
+ confirm->code = 0;
+
+ wpa_ie_len = prism54_wpa_ie_get(priv, mlmeex->address, wpa_ie);
+
+ if (!wpa_ie_len) {
+ printk(KERN_DEBUG "No WPA IE found from "
+ "address:\t%02x:%02x:%02x:%02x:%02x:%02x\n",
+ mlmeex->address[0],
+ mlmeex->address[1],
+ mlmeex->address[2],
+ mlmeex->address[3],
+ mlmeex->address[4],
+ mlmeex->address[5]
+ );
+ kfree(confirm);
+ break;
+ }
+
+ confirm->size = wpa_ie_len;
+ memcpy(&confirm->data, wpa_ie, wpa_ie_len);
+
+ mgt_set_varlen(priv, oid, confirm, wpa_ie_len);
+
+ kfree(confirm);
+
+ break;
+
+ case DOT11_OID_REASSOCIATEEX:
+ handle_request(priv, mlme, oid);
+ send_formatted_event(priv, "Reassociate request (ex)", mlme, 1);
+
+ if (priv->iw_mode != IW_MODE_MASTER
+ && mlmeex->state != DOT11_STATE_ASSOCING)
+ break;
+
+ confirm = kmalloc(sizeof(struct obj_mlmeex), GFP_ATOMIC);
+
+ if (!confirm)
+ break;
+
+ memcpy(&confirm->address, mlmeex->address, ETH_ALEN);
+
+ confirm->id = mlmeex->id;
+ confirm->state = 0; /* not used */
+ confirm->code = 0;
+
+ wpa_ie_len = prism54_wpa_ie_get(priv, mlmeex->address, wpa_ie);
+
+ if (!wpa_ie_len) {
+ printk(KERN_DEBUG "No WPA IE found from "
+ "address:\t%02x:%02x:%02x:%02x:%02x:%02x\n",
+ mlmeex->address[0],
+ mlmeex->address[1],
+ mlmeex->address[2],
+ mlmeex->address[3],
+ mlmeex->address[4],
+ mlmeex->address[5]
+ );
+ kfree(confirm);
+ break;
+ }
+
+ confirm->size = wpa_ie_len;
+ memcpy(&confirm->data, wpa_ie, wpa_ie_len);
+
+ mgt_set_varlen(priv, oid, confirm, wpa_ie_len);
+
+ kfree(confirm);
+
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+/*
+ * Process a device trap. This is called via schedule_work(), outside of
+ * interrupt context, no locks held.
+ */
+void
+prism54_process_trap(void *data)
+{
+ struct islpci_mgmtframe *frame = data;
+ struct net_device *ndev = frame->ndev;
+ enum oid_num_t n = mgt_oidtonum(frame->header->oid);
+
+ if (n != OID_NUM_LAST)
+ prism54_process_trap_helper(netdev_priv(ndev), n, frame->data);
+ islpci_mgt_release(frame);
+}
+
+int
+prism54_set_mac_address(struct net_device *ndev, void *addr)
+{
+ islpci_private *priv = netdev_priv(ndev);
+ int ret;
+
+ if (ndev->addr_len != 6)
+ return -EINVAL;
+ ret = mgt_set_request(priv, GEN_OID_MACADDRESS, 0,
+ &((struct sockaddr *) addr)->sa_data);
+ if (!ret)
+ memcpy(priv->ndev->dev_addr,
+ &((struct sockaddr *) addr)->sa_data, 6);
+
+ return ret;
+}
+
+/* Note: currently, use hostapd ioctl from the Host AP driver for WPA
+ * support. This is to be replaced with Linux wireless extensions once they
+ * get WPA support. */
+
+/* Note II: please leave all this together as it will be easier to remove later,
+ * once wireless extensions add WPA support -mcgrof */
+
+/* PRISM54_HOSTAPD ioctl() cmd: */
+enum {
+ PRISM2_SET_ENCRYPTION = 6,
+ PRISM2_HOSTAPD_SET_GENERIC_ELEMENT = 12,
+ PRISM2_HOSTAPD_MLME = 13,
+ PRISM2_HOSTAPD_SCAN_REQ = 14,
+};
+
+#define PRISM54_SET_WPA SIOCIWFIRSTPRIV+12
+#define PRISM54_HOSTAPD SIOCIWFIRSTPRIV+25
+#define PRISM54_DROP_UNENCRYPTED SIOCIWFIRSTPRIV+26
+
+#define PRISM2_HOSTAPD_MAX_BUF_SIZE 1024
+#define PRISM2_HOSTAPD_GENERIC_ELEMENT_HDR_LEN \
+((int) (&((struct prism2_hostapd_param *) 0)->u.generic_elem.data))
+
+/* Maximum length for algorithm names (-1 for nul termination)
+ * used in ioctl() */
+#define HOSTAP_CRYPT_ALG_NAME_LEN 16
+
+struct prism2_hostapd_param {
+ u32 cmd;
+ u8 sta_addr[ETH_ALEN];
+ union {
+ struct {
+ u8 alg[HOSTAP_CRYPT_ALG_NAME_LEN];
+ u32 flags;
+ u32 err;
+ u8 idx;
+ u8 seq[8]; /* sequence counter (set: RX, get: TX) */
+ u16 key_len;
+ u8 key[0];
+ } crypt;
+ struct {
+ u8 len;
+ u8 data[0];
+ } generic_elem;
+ struct {
+#define MLME_STA_DEAUTH 0
+#define MLME_STA_DISASSOC 1
+ u16 cmd;
+ u16 reason_code;
+ } mlme;
+ struct {
+ u8 ssid_len;
+ u8 ssid[32];
+ } scan_req;
+ } u;
+};
+
+
+static int
+prism2_ioctl_set_encryption(struct net_device *dev,
+ struct prism2_hostapd_param *param,
+ int param_len)
+{
+ islpci_private *priv = netdev_priv(dev);
+ int rvalue = 0, force = 0;
+ int authen = DOT11_AUTH_OS, invoke = 0, exunencrypt = 0;
+ union oid_res_t r;
+
+ /* with the new API, it's impossible to get a NULL pointer.
+ * New version of iwconfig set the IW_ENCODE_NOKEY flag
+ * when no key is given, but older versions don't. */
+
+ if (param->u.crypt.key_len > 0) {
+ /* we have a key to set */
+ int index = param->u.crypt.idx;
+ int current_index;
+ struct obj_key key = { DOT11_PRIV_TKIP, 0, "" };
+
+ /* get the current key index */
+ rvalue = mgt_get_request(priv, DOT11_OID_DEFKEYID, 0, NULL, &r);
+ current_index = r.u;
+ /* Verify that the key is not marked as invalid */
+ if (!(param->u.crypt.flags & IW_ENCODE_NOKEY)) {
+ key.length = param->u.crypt.key_len > sizeof (param->u.crypt.key) ?
+ sizeof (param->u.crypt.key) : param->u.crypt.key_len;
+ memcpy(key.key, param->u.crypt.key, key.length);
+ if (key.length == 32)
+ /* we want WPA-PSK */
+ key.type = DOT11_PRIV_TKIP;
+ if ((index < 0) || (index > 3))
+ /* no index provided use the current one */
+ index = current_index;
+
+ /* now send the key to the card */
+ rvalue |=
+ mgt_set_request(priv, DOT11_OID_DEFKEYX, index,
+ &key);
+ }
+ /*
+ * If a valid key is set, encryption should be enabled
+ * (user may turn it off later).
+ * This is also how "iwconfig ethX key on" works
+ */
+ if ((index == current_index) && (key.length > 0))
+ force = 1;
+ } else {
+ int index = (param->u.crypt.flags & IW_ENCODE_INDEX) - 1;
+ if ((index >= 0) && (index <= 3)) {
+ /* we want to set the key index */
+ rvalue |=
+ mgt_set_request(priv, DOT11_OID_DEFKEYID, 0,
+ &index);
+ } else {
+ if (!param->u.crypt.flags & IW_ENCODE_MODE) {
+ /* we cannot do anything. Complain. */
+ return -EINVAL;
+ }
+ }
+ }
+ /* now read the flags */
+ if (param->u.crypt.flags & IW_ENCODE_DISABLED) {
+ /* Encoding disabled,
+ * authen = DOT11_AUTH_OS;
+ * invoke = 0;
+ * exunencrypt = 0; */
+ }
+ if (param->u.crypt.flags & IW_ENCODE_OPEN)
+ /* Encode but accept non-encoded packets. No auth */
+ invoke = 1;
+ if ((param->u.crypt.flags & IW_ENCODE_RESTRICTED) || force) {
+ /* Refuse non-encoded packets. Auth */
+ authen = DOT11_AUTH_BOTH;
+ invoke = 1;
+ exunencrypt = 1;
+ }
+ /* do the change if requested */
+ if ((param->u.crypt.flags & IW_ENCODE_MODE) || force) {
+ rvalue |=
+ mgt_set_request(priv, DOT11_OID_AUTHENABLE, 0, &authen);
+ rvalue |=
+ mgt_set_request(priv, DOT11_OID_PRIVACYINVOKED, 0, &invoke);
+ rvalue |=
+ mgt_set_request(priv, DOT11_OID_EXUNENCRYPTED, 0,
+ &exunencrypt);
+ }
+ return rvalue;
+}
+
+static int
+prism2_ioctl_set_generic_element(struct net_device *ndev,
+ struct prism2_hostapd_param *param,
+ int param_len)
+{
+ islpci_private *priv = netdev_priv(ndev);
+ int max_len, len, alen, ret=0;
+ struct obj_attachment *attach;
+
+ len = param->u.generic_elem.len;
+ max_len = param_len - PRISM2_HOSTAPD_GENERIC_ELEMENT_HDR_LEN;
+ if (max_len < 0 || max_len < len)
+ return -EINVAL;
+
+ alen = sizeof(*attach) + len;
+ attach = kmalloc(alen, GFP_KERNEL);
+ if (attach == NULL)
+ return -ENOMEM;
+
+ memset(attach, 0, alen);
+#define WLAN_FC_TYPE_MGMT 0
+#define WLAN_FC_STYPE_ASSOC_REQ 0
+#define WLAN_FC_STYPE_REASSOC_REQ 2
+
+ /* Note: endianness is covered by mgt_set_varlen */
+
+ attach->type = (WLAN_FC_TYPE_MGMT << 2) |
+ (WLAN_FC_STYPE_ASSOC_REQ << 4);
+ attach->id = -1;
+ attach->size = len;
+ memcpy(attach->data, param->u.generic_elem.data, len);
+
+ ret = mgt_set_varlen(priv, DOT11_OID_ATTACHMENT, attach, len);
+
+ if (ret == 0) {
+ attach->type = (WLAN_FC_TYPE_MGMT << 2) |
+ (WLAN_FC_STYPE_REASSOC_REQ << 4);
+
+ ret = mgt_set_varlen(priv, DOT11_OID_ATTACHMENT, attach, len);
+
+ if (ret == 0)
+ printk(KERN_DEBUG "%s: WPA IE Attachment was set\n",
+ ndev->name);
+ }
+
+ kfree(attach);
+ return ret;
+
+}
+
+static int
+prism2_ioctl_mlme(struct net_device *dev, struct prism2_hostapd_param *param)
+{
+ return -EOPNOTSUPP;
+}
+
+static int
+prism2_ioctl_scan_req(struct net_device *ndev,
+ struct prism2_hostapd_param *param)
+{
+ islpci_private *priv = netdev_priv(ndev);
+ int i, rvalue;
+ struct obj_bsslist *bsslist;
+ u32 noise = 0;
+ char *extra = "";
+ char *current_ev = "foo";
+ union oid_res_t r;
+
+ if (islpci_get_state(priv) < PRV_STATE_INIT) {
+ /* device is not ready, fail gently */
+ return 0;
+ }
+
+ /* first get the noise value. We will use it to report the link quality */
+ rvalue = mgt_get_request(priv, DOT11_OID_NOISEFLOOR, 0, NULL, &r);
+ noise = r.u;
+
+ /* Ask the device for a list of known bss. We can report at most
+ * IW_MAX_AP=64 to the range struct. But the device won't repport anything
+ * if you change the value of IWMAX_BSS=24.
+ */
+ rvalue |= mgt_get_request(priv, DOT11_OID_BSSLIST, 0, NULL, &r);
+ bsslist = r.ptr;
+
+ /* ok now, scan the list and translate its info */
+ for (i = 0; i < min(IW_MAX_AP, (int) bsslist->nr); i++)
+ current_ev = prism54_translate_bss(ndev, current_ev,
+ extra + IW_SCAN_MAX_DATA,
+ &(bsslist->bsslist[i]),
+ noise);
+ kfree(bsslist);
+
+ return rvalue;
+}
+
+static int
+prism54_hostapd(struct net_device *ndev, struct iw_point *p)
+{
+ struct prism2_hostapd_param *param;
+ int ret = 0;
+ u32 uwrq;
+
+ printk(KERN_DEBUG "prism54_hostapd - len=%d\n", p->length);
+ if (p->length < sizeof(struct prism2_hostapd_param) ||
+ p->length > PRISM2_HOSTAPD_MAX_BUF_SIZE || !p->pointer)
+ return -EINVAL;
+
+ param = (struct prism2_hostapd_param *) kmalloc(p->length, GFP_KERNEL);
+ if (param == NULL)
+ return -ENOMEM;
+
+ if (copy_from_user(param, p->pointer, p->length)) {
+ kfree(param);
+ return -EFAULT;
+ }
+
+ switch (param->cmd) {
+ case PRISM2_SET_ENCRYPTION:
+ printk(KERN_DEBUG "%s: Caught WPA supplicant set encryption request\n",
+ ndev->name);
+ ret = prism2_ioctl_set_encryption(ndev, param, p->length);
+ break;
+ case PRISM2_HOSTAPD_SET_GENERIC_ELEMENT:
+ printk(KERN_DEBUG "%s: Caught WPA supplicant set WPA IE request\n",
+ ndev->name);
+ ret = prism2_ioctl_set_generic_element(ndev, param,
+ p->length);
+ break;
+ case PRISM2_HOSTAPD_MLME:
+ printk(KERN_DEBUG "%s: Caught WPA supplicant MLME request\n",
+ ndev->name);
+ ret = prism2_ioctl_mlme(ndev, param);
+ break;
+ case PRISM2_HOSTAPD_SCAN_REQ:
+ printk(KERN_DEBUG "%s: Caught WPA supplicant scan request\n",
+ ndev->name);
+ ret = prism2_ioctl_scan_req(ndev, param);
+ break;
+ case PRISM54_SET_WPA:
+ printk(KERN_DEBUG "%s: Caught WPA supplicant wpa init request\n",
+ ndev->name);
+ uwrq = 1;
+ ret = prism54_set_wpa(ndev, NULL, &uwrq, NULL);
+ break;
+ case PRISM54_DROP_UNENCRYPTED:
+ printk(KERN_DEBUG "%s: Caught WPA drop unencrypted request\n",
+ ndev->name);
+#if 0
+ uwrq = 0x01;
+ mgt_set(priv, DOT11_OID_EXUNENCRYPTED, &uwrq);
+ down_write(&priv->mib_sem);
+ mgt_commit(priv);
+ up_write(&priv->mib_sem);
+#endif
+ /* Not necessary, as set_wpa does it, should we just do it here though? */
+ ret = 0;
+ break;
+ default:
+ printk(KERN_DEBUG "%s: Caught a WPA supplicant request that is not supported\n",
+ ndev->name);
+ ret = -EOPNOTSUPP;
+ break;
+ }
+
+ if (ret == 0 && copy_to_user(p->pointer, param, p->length))
+ ret = -EFAULT;
+
+ kfree(param);
+
+ return ret;
+}
+
+static int
+prism54_set_wpa(struct net_device *ndev, struct iw_request_info *info,
+ __u32 * uwrq, char *extra)
+{
+ islpci_private *priv = netdev_priv(ndev);
+ u32 mlme, authen, dot1x, filter, wep;
+
+ if (islpci_get_state(priv) < PRV_STATE_INIT)
+ return 0;
+
+ wep = 1; /* For privacy invoked */
+ filter = 1; /* Filter out all unencrypted frames */
+ dot1x = 0x01; /* To enable eap filter */
+ mlme = DOT11_MLME_EXTENDED;
+ authen = DOT11_AUTH_OS; /* Only WEP uses _SK and _BOTH */
+
+ down_write(&priv->mib_sem);
+ priv->wpa = *uwrq;
+
+ switch (priv->wpa) {
+ default:
+ case 0: /* Clears/disables WPA and friends */
+ wep = 0;
+ filter = 0; /* Do not filter un-encrypted data */
+ dot1x = 0;
+ mlme = DOT11_MLME_AUTO;
+ printk("%s: Disabling WPA\n", ndev->name);
+ break;
+ case 2:
+ case 1: /* WPA */
+ printk("%s: Enabling WPA\n", ndev->name);
+ break;
+ }
+ up_write(&priv->mib_sem);
+
+ mgt_set_request(priv, DOT11_OID_AUTHENABLE, 0, &authen);
+ mgt_set_request(priv, DOT11_OID_PRIVACYINVOKED, 0, &wep);
+ mgt_set_request(priv, DOT11_OID_EXUNENCRYPTED, 0, &filter);
+ mgt_set_request(priv, DOT11_OID_DOT1XENABLE, 0, &dot1x);
+ mgt_set_request(priv, DOT11_OID_MLMEAUTOLEVEL, 0, &mlme);
+
+ return 0;
+}
+
+static int
+prism54_get_wpa(struct net_device *ndev, struct iw_request_info *info,
+ __u32 * uwrq, char *extra)
+{
+ islpci_private *priv = netdev_priv(ndev);
+ *uwrq = priv->wpa;
+ return 0;
+}
+
+static int
+prism54_set_prismhdr(struct net_device *ndev, struct iw_request_info *info,
+ __u32 * uwrq, char *extra)
+{
+ islpci_private *priv = netdev_priv(ndev);
+ priv->monitor_type =
+ (*uwrq ? ARPHRD_IEEE80211_PRISM : ARPHRD_IEEE80211);
+ if (priv->iw_mode == IW_MODE_MONITOR)
+ priv->ndev->type = priv->monitor_type;
+
+ return 0;
+}
+
+static int
+prism54_get_prismhdr(struct net_device *ndev, struct iw_request_info *info,
+ __u32 * uwrq, char *extra)
+{
+ islpci_private *priv = netdev_priv(ndev);
+ *uwrq = (priv->monitor_type == ARPHRD_IEEE80211_PRISM);
+ return 0;
+}
+
+static int
+prism54_debug_oid(struct net_device *ndev, struct iw_request_info *info,
+ __u32 * uwrq, char *extra)
+{
+ islpci_private *priv = netdev_priv(ndev);
+
+ priv->priv_oid = *uwrq;
+ printk("%s: oid 0x%08X\n", ndev->name, *uwrq);
+
+ return 0;
+}
+
+static int
+prism54_debug_get_oid(struct net_device *ndev, struct iw_request_info *info,
+ struct iw_point *data, char *extra)
+{
+ islpci_private *priv = netdev_priv(ndev);
+ struct islpci_mgmtframe *response;
+ int ret = -EIO;
+
+ printk("%s: get_oid 0x%08X\n", ndev->name, priv->priv_oid);
+ data->length = 0;
+
+ if (islpci_get_state(priv) >= PRV_STATE_INIT) {
+ ret =
+ islpci_mgt_transaction(priv->ndev, PIMFOR_OP_GET,
+ priv->priv_oid, extra, 256,
+ &response);
+ printk("%s: ret: %i\n", ndev->name, ret);
+ if (ret || !response
+ || response->header->operation == PIMFOR_OP_ERROR) {
+ if (response) {
+ islpci_mgt_release(response);
+ }
+ printk("%s: EIO\n", ndev->name);
+ ret = -EIO;
+ }
+ if (!ret) {
+ data->length = response->header->length;
+ memcpy(extra, response->data, data->length);
+ islpci_mgt_release(response);
+ printk("%s: len: %i\n", ndev->name, data->length);
+ }
+ }
+
+ return ret;
+}
+
+static int
+prism54_debug_set_oid(struct net_device *ndev, struct iw_request_info *info,
+ struct iw_point *data, char *extra)
+{
+ islpci_private *priv = netdev_priv(ndev);
+ struct islpci_mgmtframe *response;
+ int ret = 0, response_op = PIMFOR_OP_ERROR;
+
+ printk("%s: set_oid 0x%08X\tlen: %d\n", ndev->name, priv->priv_oid,
+ data->length);
+
+ if (islpci_get_state(priv) >= PRV_STATE_INIT) {
+ ret =
+ islpci_mgt_transaction(priv->ndev, PIMFOR_OP_SET,
+ priv->priv_oid, extra, data->length,
+ &response);
+ printk("%s: ret: %i\n", ndev->name, ret);
+ if (ret || !response
+ || response->header->operation == PIMFOR_OP_ERROR) {
+ if (response) {
+ islpci_mgt_release(response);
+ }
+ printk("%s: EIO\n", ndev->name);
+ ret = -EIO;
+ }
+ if (!ret) {
+ response_op = response->header->operation;
+ printk("%s: response_op: %i\n", ndev->name,
+ response_op);
+ islpci_mgt_release(response);
+ }
+ }
+
+ return (ret ? ret : -EINPROGRESS);
+}
+
+static int
+prism54_set_spy(struct net_device *ndev,
+ struct iw_request_info *info,
+ union iwreq_data *uwrq, char *extra)
+{
+ islpci_private *priv = netdev_priv(ndev);
+ u32 u, oid = OID_INL_CONFIG;
+
+ down_write(&priv->mib_sem);
+ mgt_get(priv, OID_INL_CONFIG, &u);
+
+ if ((uwrq->data.length == 0) && (priv->spy_data.spy_number > 0))
+ /* disable spy */
+ u &= ~INL_CONFIG_RXANNEX;
+ else if ((uwrq->data.length > 0) && (priv->spy_data.spy_number == 0))
+ /* enable spy */
+ u |= INL_CONFIG_RXANNEX;
+
+ mgt_set(priv, OID_INL_CONFIG, &u);
+ mgt_commit_list(priv, &oid, 1);
+ up_write(&priv->mib_sem);
+
+ return iw_handler_set_spy(ndev, info, uwrq, extra);
+}
+
+static const iw_handler prism54_handler[] = {
+ (iw_handler) prism54_commit, /* SIOCSIWCOMMIT */
+ (iw_handler) prism54_get_name, /* SIOCGIWNAME */
+ (iw_handler) NULL, /* SIOCSIWNWID */
+ (iw_handler) NULL, /* SIOCGIWNWID */
+ (iw_handler) prism54_set_freq, /* SIOCSIWFREQ */
+ (iw_handler) prism54_get_freq, /* SIOCGIWFREQ */
+ (iw_handler) prism54_set_mode, /* SIOCSIWMODE */
+ (iw_handler) prism54_get_mode, /* SIOCGIWMODE */
+ (iw_handler) prism54_set_sens, /* SIOCSIWSENS */
+ (iw_handler) prism54_get_sens, /* SIOCGIWSENS */
+ (iw_handler) NULL, /* SIOCSIWRANGE */
+ (iw_handler) prism54_get_range, /* SIOCGIWRANGE */
+ (iw_handler) NULL, /* SIOCSIWPRIV */
+ (iw_handler) NULL, /* SIOCGIWPRIV */
+ (iw_handler) NULL, /* SIOCSIWSTATS */
+ (iw_handler) NULL, /* SIOCGIWSTATS */
+ prism54_set_spy, /* SIOCSIWSPY */
+ iw_handler_get_spy, /* SIOCGIWSPY */
+ iw_handler_set_thrspy, /* SIOCSIWTHRSPY */
+ iw_handler_get_thrspy, /* SIOCGIWTHRSPY */
+ (iw_handler) prism54_set_wap, /* SIOCSIWAP */
+ (iw_handler) prism54_get_wap, /* SIOCGIWAP */
+ (iw_handler) NULL, /* -- hole -- */
+ (iw_handler) NULL, /* SIOCGIWAPLIST depreciated */
+ (iw_handler) prism54_set_scan, /* SIOCSIWSCAN */
+ (iw_handler) prism54_get_scan, /* SIOCGIWSCAN */
+ (iw_handler) prism54_set_essid, /* SIOCSIWESSID */
+ (iw_handler) prism54_get_essid, /* SIOCGIWESSID */
+ (iw_handler) prism54_set_nick, /* SIOCSIWNICKN */
+ (iw_handler) prism54_get_nick, /* SIOCGIWNICKN */
+ (iw_handler) NULL, /* -- hole -- */
+ (iw_handler) NULL, /* -- hole -- */
+ (iw_handler) prism54_set_rate, /* SIOCSIWRATE */
+ (iw_handler) prism54_get_rate, /* SIOCGIWRATE */
+ (iw_handler) prism54_set_rts, /* SIOCSIWRTS */
+ (iw_handler) prism54_get_rts, /* SIOCGIWRTS */
+ (iw_handler) prism54_set_frag, /* SIOCSIWFRAG */
+ (iw_handler) prism54_get_frag, /* SIOCGIWFRAG */
+ (iw_handler) prism54_set_txpower, /* SIOCSIWTXPOW */
+ (iw_handler) prism54_get_txpower, /* SIOCGIWTXPOW */
+ (iw_handler) prism54_set_retry, /* SIOCSIWRETRY */
+ (iw_handler) prism54_get_retry, /* SIOCGIWRETRY */
+ (iw_handler) prism54_set_encode, /* SIOCSIWENCODE */
+ (iw_handler) prism54_get_encode, /* SIOCGIWENCODE */
+ (iw_handler) NULL, /* SIOCSIWPOWER */
+ (iw_handler) NULL, /* SIOCGIWPOWER */
+};
+
+/* The low order bit identify a SET (0) or a GET (1) ioctl. */
+
+#define PRISM54_RESET SIOCIWFIRSTPRIV
+#define PRISM54_GET_POLICY SIOCIWFIRSTPRIV+1
+#define PRISM54_SET_POLICY SIOCIWFIRSTPRIV+2
+#define PRISM54_GET_MAC SIOCIWFIRSTPRIV+3
+#define PRISM54_ADD_MAC SIOCIWFIRSTPRIV+4
+
+#define PRISM54_DEL_MAC SIOCIWFIRSTPRIV+6
+
+#define PRISM54_KICK_MAC SIOCIWFIRSTPRIV+8
+
+#define PRISM54_KICK_ALL SIOCIWFIRSTPRIV+10
+
+#define PRISM54_GET_WPA SIOCIWFIRSTPRIV+11
+#define PRISM54_SET_WPA SIOCIWFIRSTPRIV+12
+
+#define PRISM54_DBG_OID SIOCIWFIRSTPRIV+14
+#define PRISM54_DBG_GET_OID SIOCIWFIRSTPRIV+15
+#define PRISM54_DBG_SET_OID SIOCIWFIRSTPRIV+16
+
+#define PRISM54_GET_OID SIOCIWFIRSTPRIV+17
+#define PRISM54_SET_OID_U32 SIOCIWFIRSTPRIV+18
+#define PRISM54_SET_OID_STR SIOCIWFIRSTPRIV+20
+#define PRISM54_SET_OID_ADDR SIOCIWFIRSTPRIV+22
+
+#define PRISM54_GET_PRISMHDR SIOCIWFIRSTPRIV+23
+#define PRISM54_SET_PRISMHDR SIOCIWFIRSTPRIV+24
+
+#define IWPRIV_SET_U32(n,x) { n, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, "s_"x }
+#define IWPRIV_SET_SSID(n,x) { n, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_FIXED | 1, 0, "s_"x }
+#define IWPRIV_SET_ADDR(n,x) { n, IW_PRIV_TYPE_ADDR | IW_PRIV_SIZE_FIXED | 1, 0, "s_"x }
+#define IWPRIV_GET(n,x) { n, 0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_FIXED | PRIV_STR_SIZE, "g_"x }
+
+#define IWPRIV_U32(n,x) IWPRIV_SET_U32(n,x), IWPRIV_GET(n,x)
+#define IWPRIV_SSID(n,x) IWPRIV_SET_SSID(n,x), IWPRIV_GET(n,x)
+#define IWPRIV_ADDR(n,x) IWPRIV_SET_ADDR(n,x), IWPRIV_GET(n,x)
+
+/* Note : limited to 128 private ioctls (wireless tools 26) */
+
+static const struct iw_priv_args prism54_private_args[] = {
+/*{ cmd, set_args, get_args, name } */
+ {PRISM54_RESET, 0, 0, "reset"},
+ {PRISM54_GET_PRISMHDR, 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
+ "get_prismhdr"},
+ {PRISM54_SET_PRISMHDR, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0,
+ "set_prismhdr"},
+ {PRISM54_GET_POLICY, 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
+ "getPolicy"},
+ {PRISM54_SET_POLICY, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0,
+ "setPolicy"},
+ {PRISM54_GET_MAC, 0, IW_PRIV_TYPE_ADDR | 64, "getMac"},
+ {PRISM54_ADD_MAC, IW_PRIV_TYPE_ADDR | IW_PRIV_SIZE_FIXED | 1, 0,
+ "addMac"},
+ {PRISM54_DEL_MAC, IW_PRIV_TYPE_ADDR | IW_PRIV_SIZE_FIXED | 1, 0,
+ "delMac"},
+ {PRISM54_KICK_MAC, IW_PRIV_TYPE_ADDR | IW_PRIV_SIZE_FIXED | 1, 0,
+ "kickMac"},
+ {PRISM54_KICK_ALL, 0, 0, "kickAll"},
+ {PRISM54_GET_WPA, 0, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1,
+ "get_wpa"},
+ {PRISM54_SET_WPA, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0,
+ "set_wpa"},
+ {PRISM54_DBG_OID, IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0,
+ "dbg_oid"},
+ {PRISM54_DBG_GET_OID, 0, IW_PRIV_TYPE_BYTE | 256, "dbg_get_oid"},
+ {PRISM54_DBG_SET_OID, IW_PRIV_TYPE_BYTE | 256, 0, "dbg_set_oid"},
+ /* --- sub-ioctls handlers --- */
+ {PRISM54_GET_OID,
+ 0, IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_FIXED | PRIV_STR_SIZE, ""},
+ {PRISM54_SET_OID_U32,
+ IW_PRIV_TYPE_INT | IW_PRIV_SIZE_FIXED | 1, 0, ""},
+ {PRISM54_SET_OID_STR,
+ IW_PRIV_TYPE_CHAR | IW_PRIV_SIZE_FIXED | 1, 0, ""},
+ {PRISM54_SET_OID_ADDR,
+ IW_PRIV_TYPE_ADDR | IW_PRIV_SIZE_FIXED | 1, 0, ""},
+ /* --- sub-ioctls definitions --- */
+ IWPRIV_ADDR(GEN_OID_MACADDRESS, "addr"),
+ IWPRIV_GET(GEN_OID_LINKSTATE, "linkstate"),
+ IWPRIV_U32(DOT11_OID_BSSTYPE, "bsstype"),
+ IWPRIV_ADDR(DOT11_OID_BSSID, "bssid"),
+ IWPRIV_U32(DOT11_OID_STATE, "state"),
+ IWPRIV_U32(DOT11_OID_AID, "aid"),
+
+ IWPRIV_SSID(DOT11_OID_SSIDOVERRIDE, "ssidoverride"),
+
+ IWPRIV_U32(DOT11_OID_MEDIUMLIMIT, "medlimit"),
+ IWPRIV_U32(DOT11_OID_BEACONPERIOD, "beacon"),
+ IWPRIV_U32(DOT11_OID_DTIMPERIOD, "dtimperiod"),
+
+ IWPRIV_U32(DOT11_OID_AUTHENABLE, "authenable"),
+ IWPRIV_U32(DOT11_OID_PRIVACYINVOKED, "privinvok"),
+ IWPRIV_U32(DOT11_OID_EXUNENCRYPTED, "exunencrypt"),
+
+ IWPRIV_U32(DOT11_OID_REKEYTHRESHOLD, "rekeythresh"),
+
+ IWPRIV_U32(DOT11_OID_MAXTXLIFETIME, "maxtxlife"),
+ IWPRIV_U32(DOT11_OID_MAXRXLIFETIME, "maxrxlife"),
+ IWPRIV_U32(DOT11_OID_ALOFT_FIXEDRATE, "fixedrate"),
+ IWPRIV_U32(DOT11_OID_MAXFRAMEBURST, "frameburst"),
+ IWPRIV_U32(DOT11_OID_PSM, "psm"),
+
+ IWPRIV_U32(DOT11_OID_BRIDGELOCAL, "bridge"),
+ IWPRIV_U32(DOT11_OID_CLIENTS, "clients"),
+ IWPRIV_U32(DOT11_OID_CLIENTSASSOCIATED, "clientassoc"),
+ IWPRIV_U32(DOT11_OID_DOT1XENABLE, "dot1xenable"),
+ IWPRIV_U32(DOT11_OID_ANTENNARX, "rxant"),
+ IWPRIV_U32(DOT11_OID_ANTENNATX, "txant"),
+ IWPRIV_U32(DOT11_OID_ANTENNADIVERSITY, "antdivers"),
+ IWPRIV_U32(DOT11_OID_EDTHRESHOLD, "edthresh"),
+ IWPRIV_U32(DOT11_OID_PREAMBLESETTINGS, "preamble"),
+ IWPRIV_GET(DOT11_OID_RATES, "rates"),
+ IWPRIV_U32(DOT11_OID_OUTPUTPOWER, ".11outpower"),
+ IWPRIV_GET(DOT11_OID_SUPPORTEDRATES, "supprates"),
+ IWPRIV_GET(DOT11_OID_SUPPORTEDFREQUENCIES, "suppfreq"),
+
+ IWPRIV_U32(DOT11_OID_NOISEFLOOR, "noisefloor"),
+ IWPRIV_GET(DOT11_OID_FREQUENCYACTIVITY, "freqactivity"),
+ IWPRIV_U32(DOT11_OID_NONERPPROTECTION, "nonerpprotec"),
+ IWPRIV_U32(DOT11_OID_PROFILES, "profile"),
+ IWPRIV_GET(DOT11_OID_EXTENDEDRATES, "extrates"),
+ IWPRIV_U32(DOT11_OID_MLMEAUTOLEVEL, "mlmelevel"),
+
+ IWPRIV_GET(DOT11_OID_BSSS, "bsss"),
+ IWPRIV_GET(DOT11_OID_BSSLIST, "bsslist"),
+ IWPRIV_U32(OID_INL_MODE, "mode"),
+ IWPRIV_U32(OID_INL_CONFIG, "config"),
+ IWPRIV_U32(OID_INL_DOT11D_CONFORMANCE, ".11dconform"),
+ IWPRIV_GET(OID_INL_PHYCAPABILITIES, "phycapa"),
+ IWPRIV_U32(OID_INL_OUTPUTPOWER, "outpower"),
+};
+
+static const iw_handler prism54_private_handler[] = {
+ (iw_handler) prism54_reset,
+ (iw_handler) prism54_get_policy,
+ (iw_handler) prism54_set_policy,
+ (iw_handler) prism54_get_mac,
+ (iw_handler) prism54_add_mac,
+ (iw_handler) NULL,
+ (iw_handler) prism54_del_mac,
+ (iw_handler) NULL,
+ (iw_handler) prism54_kick_mac,
+ (iw_handler) NULL,
+ (iw_handler) prism54_kick_all,
+ (iw_handler) prism54_get_wpa,
+ (iw_handler) prism54_set_wpa,
+ (iw_handler) NULL,
+ (iw_handler) prism54_debug_oid,
+ (iw_handler) prism54_debug_get_oid,
+ (iw_handler) prism54_debug_set_oid,
+ (iw_handler) prism54_get_oid,
+ (iw_handler) prism54_set_u32,
+ (iw_handler) NULL,
+ (iw_handler) prism54_set_raw,
+ (iw_handler) NULL,
+ (iw_handler) prism54_set_raw,
+ (iw_handler) prism54_get_prismhdr,
+ (iw_handler) prism54_set_prismhdr,
+};
+
+const struct iw_handler_def prism54_handler_def = {
+ .num_standard = sizeof (prism54_handler) / sizeof (iw_handler),
+ .num_private = sizeof (prism54_private_handler) / sizeof (iw_handler),
+ .num_private_args =
+ sizeof (prism54_private_args) / sizeof (struct iw_priv_args),
+ .standard = (iw_handler *) prism54_handler,
+ .private = (iw_handler *) prism54_private_handler,
+ .private_args = (struct iw_priv_args *) prism54_private_args,
+#if WIRELESS_EXT == 16
+ .spy_offset = offsetof(islpci_private, spy_data),
+#endif /* WIRELESS_EXT == 16 */
+};
+
+/* For wpa_supplicant */
+
+int
+prism54_ioctl(struct net_device *ndev, struct ifreq *rq, int cmd)
+{
+ struct iwreq *wrq = (struct iwreq *) rq;
+ int ret = -1;
+ switch (cmd) {
+ case PRISM54_HOSTAPD:
+ if (!capable(CAP_NET_ADMIN))
+ return -EPERM;
+ ret = prism54_hostapd(ndev, &wrq->u.data);
+ return ret;
+ }
+ return -EOPNOTSUPP;
+}
diff --git a/drivers/net/wireless/prism54/isl_ioctl.h b/drivers/net/wireless/prism54/isl_ioctl.h
new file mode 100644
index 0000000..46d5cde
--- /dev/null
+++ b/drivers/net/wireless/prism54/isl_ioctl.h
@@ -0,0 +1,51 @@
+/*
+ *
+ * Copyright (C) 2002 Intersil Americas Inc.
+ * (C) 2003 Aurelien Alleaume <slts@free.fr>
+ * (C) 2003 Luis R. Rodriguez <mcgrof@ruslug.rutgers.edu>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef _ISL_IOCTL_H
+#define _ISL_IOCTL_H
+
+#include "islpci_mgt.h"
+#include "islpci_dev.h"
+
+#include <net/iw_handler.h> /* New driver API */
+
+#define SUPPORTED_WIRELESS_EXT 16
+
+void prism54_mib_init(islpci_private *);
+
+struct iw_statistics *prism54_get_wireless_stats(struct net_device *);
+void prism54_update_stats(islpci_private *);
+
+void prism54_acl_init(struct islpci_acl *);
+void prism54_acl_clean(struct islpci_acl *);
+
+void prism54_process_trap(void *);
+
+void prism54_wpa_ie_init(islpci_private *priv);
+void prism54_wpa_ie_clean(islpci_private *priv);
+
+int prism54_set_mac_address(struct net_device *, void *);
+
+int prism54_ioctl(struct net_device *, struct ifreq *, int);
+
+extern const struct iw_handler_def prism54_handler_def;
+
+#endif /* _ISL_IOCTL_H */
diff --git a/drivers/net/wireless/prism54/isl_oid.h b/drivers/net/wireless/prism54/isl_oid.h
new file mode 100644
index 0000000..419edf7
--- /dev/null
+++ b/drivers/net/wireless/prism54/isl_oid.h
@@ -0,0 +1,507 @@
+/*
+ *
+ *
+ * Copyright (C) 2003 Herbert Valerio Riedel <hvr@gnu.org>
+ * Copyright (C) 2004 Luis R. Rodriguez <mcgrof@ruslug.rutgers.edu>
+ * Copyright (C) 2004 Aurelien Alleaume <slts@free.fr>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#if !defined(_ISL_OID_H)
+#define _ISL_OID_H
+
+/*
+ * MIB related constant and structure definitions for communicating
+ * with the device firmware
+ */
+
+struct obj_ssid {
+ u8 length;
+ char octets[33];
+} __attribute__ ((packed));
+
+struct obj_key {
+ u8 type; /* dot11_priv_t */
+ u8 length;
+ char key[32];
+} __attribute__ ((packed));
+
+struct obj_mlme {
+ u8 address[6];
+ u16 id;
+ u16 state;
+ u16 code;
+} __attribute__ ((packed));
+
+struct obj_mlmeex {
+ u8 address[6];
+ u16 id;
+ u16 state;
+ u16 code;
+ u16 size;
+ u8 data[0];
+} __attribute__ ((packed));
+
+struct obj_buffer {
+ u32 size;
+ u32 addr; /* 32bit bus address */
+} __attribute__ ((packed));
+
+struct obj_bss {
+ u8 address[6];
+ int:16; /* padding */
+
+ char state;
+ char reserved;
+ short age;
+
+ char quality;
+ char rssi;
+
+ struct obj_ssid ssid;
+ short channel;
+ char beacon_period;
+ char dtim_period;
+ short capinfo;
+ short rates;
+ short basic_rates;
+ int:16; /* padding */
+} __attribute__ ((packed));
+
+struct obj_bsslist {
+ u32 nr;
+ struct obj_bss bsslist[0];
+} __attribute__ ((packed));
+
+struct obj_frequencies {
+ u16 nr;
+ u16 mhz[0];
+} __attribute__ ((packed));
+
+struct obj_attachment {
+ char type;
+ char reserved;
+ short id;
+ short size;
+ char data[0];
+} __attribute__((packed));
+
+/*
+ * in case everything's ok, the inlined function below will be
+ * optimized away by the compiler...
+ */
+static inline void
+__bug_on_wrong_struct_sizes(void)
+{
+ BUG_ON(sizeof (struct obj_ssid) != 34);
+ BUG_ON(sizeof (struct obj_key) != 34);
+ BUG_ON(sizeof (struct obj_mlme) != 12);
+ BUG_ON(sizeof (struct obj_mlmeex) != 14);
+ BUG_ON(sizeof (struct obj_buffer) != 8);
+ BUG_ON(sizeof (struct obj_bss) != 60);
+ BUG_ON(sizeof (struct obj_bsslist) != 4);
+ BUG_ON(sizeof (struct obj_frequencies) != 2);
+}
+
+enum dot11_state_t {
+ DOT11_STATE_NONE = 0,
+ DOT11_STATE_AUTHING = 1,
+ DOT11_STATE_AUTH = 2,
+ DOT11_STATE_ASSOCING = 3,
+
+ DOT11_STATE_ASSOC = 5,
+ DOT11_STATE_IBSS = 6,
+ DOT11_STATE_WDS = 7
+};
+
+enum dot11_bsstype_t {
+ DOT11_BSSTYPE_NONE = 0,
+ DOT11_BSSTYPE_INFRA = 1,
+ DOT11_BSSTYPE_IBSS = 2,
+ DOT11_BSSTYPE_ANY = 3
+};
+
+enum dot11_auth_t {
+ DOT11_AUTH_NONE = 0,
+ DOT11_AUTH_OS = 1,
+ DOT11_AUTH_SK = 2,
+ DOT11_AUTH_BOTH = 3
+};
+
+enum dot11_mlme_t {
+ DOT11_MLME_AUTO = 0,
+ DOT11_MLME_INTERMEDIATE = 1,
+ DOT11_MLME_EXTENDED = 2
+};
+
+enum dot11_priv_t {
+ DOT11_PRIV_WEP = 0,
+ DOT11_PRIV_TKIP = 1
+};
+
+/* Prism "Nitro" / Frameburst / "Packet Frame Grouping"
+ * Value is in microseconds. Represents the # microseconds
+ * the firmware will take to group frames before sending out then out
+ * together with a CSMA contention. Without this all frames are
+ * sent with a CSMA contention.
+ * Bibliography:
+ * http://www.hpl.hp.com/personal/Jean_Tourrilhes/Papers/Packet.Frame.Grouping.html
+ */
+enum dot11_maxframeburst_t {
+ /* Values for DOT11_OID_MAXFRAMEBURST */
+ DOT11_MAXFRAMEBURST_OFF = 0, /* Card firmware default */
+ DOT11_MAXFRAMEBURST_MIXED_SAFE = 650, /* 802.11 a,b,g safe */
+ DOT11_MAXFRAMEBURST_IDEAL = 1300, /* Theoretical ideal level */
+ DOT11_MAXFRAMEBURST_MAX = 5000, /* Use this as max,
+ * Note: firmware allows for greater values. This is a
+ * recommended max. I'll update this as I find
+ * out what the real MAX is. Also note that you don't necessarily
+ * get better results with a greater value here.
+ */
+};
+
+/* Support for 802.11 long and short frame preambles.
+ * Long preamble uses 128-bit sync field, 8-bit CRC
+ * Short preamble uses 56-bit sync field, 16-bit CRC
+ *
+ * 802.11a -- not sure, both optionally ?
+ * 802.11b supports long and optionally short
+ * 802.11g supports both */
+enum dot11_preamblesettings_t {
+ DOT11_PREAMBLESETTING_LONG = 0,
+ /* Allows *only* long 802.11 preambles */
+ DOT11_PREAMBLESETTING_SHORT = 1,
+ /* Allows *only* short 802.11 preambles */
+ DOT11_PREAMBLESETTING_DYNAMIC = 2
+ /* AutomatiGically set */
+};
+
+/* Support for 802.11 slot timing (time between packets).
+ *
+ * Long uses 802.11a slot timing (9 usec ?)
+ * Short uses 802.11b slot timing (20 use ?) */
+enum dot11_slotsettings_t {
+ DOT11_SLOTSETTINGS_LONG = 0,
+ /* Allows *only* long 802.11b slot timing */
+ DOT11_SLOTSETTINGS_SHORT = 1,
+ /* Allows *only* long 802.11a slot timing */
+ DOT11_SLOTSETTINGS_DYNAMIC = 2
+ /* AutomatiGically set */
+};
+
+/* All you need to know, ERP is "Extended Rate PHY".
+ * An Extended Rate PHY (ERP) STA or AP shall support three different
+ * preamble and header formats:
+ * Long preamble (refer to above)
+ * Short preamble (refer to above)
+ * OFDM preamble ( ? )
+ *
+ * I'm assuming here Protection tells the AP
+ * to be careful, a STA which cannot handle the long pre-amble
+ * has joined.
+ */
+enum do11_nonerpstatus_t {
+ DOT11_ERPSTAT_NONEPRESENT = 0,
+ DOT11_ERPSTAT_USEPROTECTION = 1
+};
+
+/* (ERP is "Extended Rate PHY") Way to read NONERP is NON-ERP-*
+ * The key here is DOT11 NON ERP NEVER protects against
+ * NON ERP STA's. You *don't* want this unless
+ * you know what you are doing. It means you will only
+ * get Extended Rate capabilities */
+enum dot11_nonerpprotection_t {
+ DOT11_NONERP_NEVER = 0,
+ DOT11_NONERP_ALWAYS = 1,
+ DOT11_NONERP_DYNAMIC = 2
+};
+
+/* Preset OID configuration for 802.11 modes
+ * Note: DOT11_OID_CW[MIN|MAX] hold the values of the
+ * DCS MIN|MAX backoff used */
+enum dot11_profile_t { /* And set/allowed values */
+ /* Allowed values for DOT11_OID_PROFILES */
+ DOT11_PROFILE_B_ONLY = 0,
+ /* DOT11_OID_RATES: 1, 2, 5.5, 11Mbps
+ * DOT11_OID_PREAMBLESETTINGS: DOT11_PREAMBLESETTING_DYNAMIC
+ * DOT11_OID_CWMIN: 31
+ * DOT11_OID_NONEPROTECTION: DOT11_NOERP_DYNAMIC
+ * DOT11_OID_SLOTSETTINGS: DOT11_SLOTSETTINGS_LONG
+ */
+ DOT11_PROFILE_MIXED_G_WIFI = 1,
+ /* DOT11_OID_RATES: 1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, 54Mbs
+ * DOT11_OID_PREAMBLESETTINGS: DOT11_PREAMBLESETTING_DYNAMIC
+ * DOT11_OID_CWMIN: 15
+ * DOT11_OID_NONEPROTECTION: DOT11_NOERP_DYNAMIC
+ * DOT11_OID_SLOTSETTINGS: DOT11_SLOTSETTINGS_DYNAMIC
+ */
+ DOT11_PROFILE_MIXED_LONG = 2, /* "Long range" */
+ /* Same as Profile MIXED_G_WIFI */
+ DOT11_PROFILE_G_ONLY = 3,
+ /* Same as Profile MIXED_G_WIFI */
+ DOT11_PROFILE_TEST = 4,
+ /* Same as Profile MIXED_G_WIFI except:
+ * DOT11_OID_PREAMBLESETTINGS: DOT11_PREAMBLESETTING_SHORT
+ * DOT11_OID_NONEPROTECTION: DOT11_NOERP_NEVER
+ * DOT11_OID_SLOTSETTINGS: DOT11_SLOTSETTINGS_SHORT
+ */
+ DOT11_PROFILE_B_WIFI = 5,
+ /* Same as Profile B_ONLY */
+ DOT11_PROFILE_A_ONLY = 6,
+ /* Same as Profile MIXED_G_WIFI except:
+ * DOT11_OID_RATES: 6, 9, 12, 18, 24, 36, 48, 54Mbs
+ */
+ DOT11_PROFILE_MIXED_SHORT = 7
+ /* Same as MIXED_G_WIFI */
+};
+
+
+/* The dot11d conformance level configures the 802.11d conformance levels.
+ * The following conformance levels exist:*/
+enum oid_inl_conformance_t {
+ OID_INL_CONFORMANCE_NONE = 0, /* Perform active scanning */
+ OID_INL_CONFORMANCE_STRICT = 1, /* Strictly adhere to 802.11d */
+ OID_INL_CONFORMANCE_FLEXIBLE = 2, /* Use passed 802.11d info to
+ * determine channel AND/OR just make assumption that active
+ * channels are valid channels */
+};
+
+enum oid_inl_mode_t {
+ INL_MODE_NONE = -1,
+ INL_MODE_PROMISCUOUS = 0,
+ INL_MODE_CLIENT = 1,
+ INL_MODE_AP = 2,
+ INL_MODE_SNIFFER = 3
+};
+
+enum oid_inl_config_t {
+ INL_CONFIG_NOTHING = 0x00,
+ INL_CONFIG_MANUALRUN = 0x01,
+ INL_CONFIG_FRAMETRAP = 0x02,
+ INL_CONFIG_RXANNEX = 0x04,
+ INL_CONFIG_TXANNEX = 0x08,
+ INL_CONFIG_WDS = 0x10
+};
+
+enum oid_inl_phycap_t {
+ INL_PHYCAP_2400MHZ = 1,
+ INL_PHYCAP_5000MHZ = 2,
+ INL_PHYCAP_FAA = 0x80000000, /* Means card supports the FAA switch */
+};
+
+
+enum oid_num_t {
+ GEN_OID_MACADDRESS = 0,
+ GEN_OID_LINKSTATE,
+ GEN_OID_WATCHDOG,
+ GEN_OID_MIBOP,
+ GEN_OID_OPTIONS,
+ GEN_OID_LEDCONFIG,
+
+ /* 802.11 */
+ DOT11_OID_BSSTYPE,
+ DOT11_OID_BSSID,
+ DOT11_OID_SSID,
+ DOT11_OID_STATE,
+ DOT11_OID_AID,
+ DOT11_OID_COUNTRYSTRING,
+ DOT11_OID_SSIDOVERRIDE,
+
+ DOT11_OID_MEDIUMLIMIT,
+ DOT11_OID_BEACONPERIOD,
+ DOT11_OID_DTIMPERIOD,
+ DOT11_OID_ATIMWINDOW,
+ DOT11_OID_LISTENINTERVAL,
+ DOT11_OID_CFPPERIOD,
+ DOT11_OID_CFPDURATION,
+
+ DOT11_OID_AUTHENABLE,
+ DOT11_OID_PRIVACYINVOKED,
+ DOT11_OID_EXUNENCRYPTED,
+ DOT11_OID_DEFKEYID,
+ DOT11_OID_DEFKEYX, /* DOT11_OID_DEFKEY1,...DOT11_OID_DEFKEY4 */
+ DOT11_OID_STAKEY,
+ DOT11_OID_REKEYTHRESHOLD,
+ DOT11_OID_STASC,
+
+ DOT11_OID_PRIVTXREJECTED,
+ DOT11_OID_PRIVRXPLAIN,
+ DOT11_OID_PRIVRXFAILED,
+ DOT11_OID_PRIVRXNOKEY,
+
+ DOT11_OID_RTSTHRESH,
+ DOT11_OID_FRAGTHRESH,
+ DOT11_OID_SHORTRETRIES,
+ DOT11_OID_LONGRETRIES,
+ DOT11_OID_MAXTXLIFETIME,
+ DOT11_OID_MAXRXLIFETIME,
+ DOT11_OID_AUTHRESPTIMEOUT,
+ DOT11_OID_ASSOCRESPTIMEOUT,
+
+ DOT11_OID_ALOFT_TABLE,
+ DOT11_OID_ALOFT_CTRL_TABLE,
+ DOT11_OID_ALOFT_RETREAT,
+ DOT11_OID_ALOFT_PROGRESS,
+ DOT11_OID_ALOFT_FIXEDRATE,
+ DOT11_OID_ALOFT_RSSIGRAPH,
+ DOT11_OID_ALOFT_CONFIG,
+
+ DOT11_OID_VDCFX,
+ DOT11_OID_MAXFRAMEBURST,
+
+ DOT11_OID_PSM,
+ DOT11_OID_CAMTIMEOUT,
+ DOT11_OID_RECEIVEDTIMS,
+ DOT11_OID_ROAMPREFERENCE,
+
+ DOT11_OID_BRIDGELOCAL,
+ DOT11_OID_CLIENTS,
+ DOT11_OID_CLIENTSASSOCIATED,
+ DOT11_OID_CLIENTX, /* DOT11_OID_CLIENTX,...DOT11_OID_CLIENT2007 */
+
+ DOT11_OID_CLIENTFIND,
+ DOT11_OID_WDSLINKADD,
+ DOT11_OID_WDSLINKREMOVE,
+ DOT11_OID_EAPAUTHSTA,
+ DOT11_OID_EAPUNAUTHSTA,
+ DOT11_OID_DOT1XENABLE,
+ DOT11_OID_MICFAILURE,
+ DOT11_OID_REKEYINDICATE,
+
+ DOT11_OID_MPDUTXSUCCESSFUL,
+ DOT11_OID_MPDUTXONERETRY,
+ DOT11_OID_MPDUTXMULTIPLERETRIES,
+ DOT11_OID_MPDUTXFAILED,
+ DOT11_OID_MPDURXSUCCESSFUL,
+ DOT11_OID_MPDURXDUPS,
+ DOT11_OID_RTSSUCCESSFUL,
+ DOT11_OID_RTSFAILED,
+ DOT11_OID_ACKFAILED,
+ DOT11_OID_FRAMERECEIVES,
+ DOT11_OID_FRAMEERRORS,
+ DOT11_OID_FRAMEABORTS,
+ DOT11_OID_FRAMEABORTSPHY,
+
+ DOT11_OID_SLOTTIME,
+ DOT11_OID_CWMIN, /* MIN DCS backoff */
+ DOT11_OID_CWMAX, /* MAX DCS backoff */
+ DOT11_OID_ACKWINDOW,
+ DOT11_OID_ANTENNARX,
+ DOT11_OID_ANTENNATX,
+ DOT11_OID_ANTENNADIVERSITY,
+ DOT11_OID_CHANNEL,
+ DOT11_OID_EDTHRESHOLD,
+ DOT11_OID_PREAMBLESETTINGS,
+ DOT11_OID_RATES,
+ DOT11_OID_CCAMODESUPPORTED,
+ DOT11_OID_CCAMODE,
+ DOT11_OID_RSSIVECTOR,
+ DOT11_OID_OUTPUTPOWERTABLE,
+ DOT11_OID_OUTPUTPOWER,
+ DOT11_OID_SUPPORTEDRATES,
+ DOT11_OID_FREQUENCY,
+ DOT11_OID_SUPPORTEDFREQUENCIES,
+ DOT11_OID_NOISEFLOOR,
+ DOT11_OID_FREQUENCYACTIVITY,
+ DOT11_OID_IQCALIBRATIONTABLE,
+ DOT11_OID_NONERPPROTECTION,
+ DOT11_OID_SLOTSETTINGS,
+ DOT11_OID_NONERPTIMEOUT,
+ DOT11_OID_PROFILES,
+ DOT11_OID_EXTENDEDRATES,
+
+ DOT11_OID_DEAUTHENTICATE,
+ DOT11_OID_AUTHENTICATE,
+ DOT11_OID_DISASSOCIATE,
+ DOT11_OID_ASSOCIATE,
+ DOT11_OID_SCAN,
+ DOT11_OID_BEACON,
+ DOT11_OID_PROBE,
+ DOT11_OID_DEAUTHENTICATEEX,
+ DOT11_OID_AUTHENTICATEEX,
+ DOT11_OID_DISASSOCIATEEX,
+ DOT11_OID_ASSOCIATEEX,
+ DOT11_OID_REASSOCIATE,
+ DOT11_OID_REASSOCIATEEX,
+
+ DOT11_OID_NONERPSTATUS,
+
+ DOT11_OID_STATIMEOUT,
+ DOT11_OID_MLMEAUTOLEVEL,
+ DOT11_OID_BSSTIMEOUT,
+ DOT11_OID_ATTACHMENT,
+ DOT11_OID_PSMBUFFER,
+
+ DOT11_OID_BSSS,
+ DOT11_OID_BSSX, /*DOT11_OID_BSS1,...,DOT11_OID_BSS64 */
+ DOT11_OID_BSSFIND,
+ DOT11_OID_BSSLIST,
+
+ OID_INL_TUNNEL,
+ OID_INL_MEMADDR,
+ OID_INL_MEMORY,
+ OID_INL_MODE,
+ OID_INL_COMPONENT_NR,
+ OID_INL_VERSION,
+ OID_INL_INTERFACE_ID,
+ OID_INL_COMPONENT_ID,
+ OID_INL_CONFIG,
+ OID_INL_DOT11D_CONFORMANCE,
+ OID_INL_PHYCAPABILITIES,
+ OID_INL_OUTPUTPOWER,
+
+ OID_NUM_LAST
+};
+
+#define OID_FLAG_CACHED 0x80
+#define OID_FLAG_TYPE 0x7f
+
+#define OID_TYPE_U32 0x01
+#define OID_TYPE_SSID 0x02
+#define OID_TYPE_KEY 0x03
+#define OID_TYPE_BUFFER 0x04
+#define OID_TYPE_BSS 0x05
+#define OID_TYPE_BSSLIST 0x06
+#define OID_TYPE_FREQUENCIES 0x07
+#define OID_TYPE_MLME 0x08
+#define OID_TYPE_MLMEEX 0x09
+#define OID_TYPE_ADDR 0x0A
+#define OID_TYPE_RAW 0x0B
+#define OID_TYPE_ATTACH 0x0C
+
+/* OID_TYPE_MLMEEX is special because of a variable size field when sending.
+ * Not yet implemented (not used in driver anyway).
+ */
+
+struct oid_t {
+ enum oid_num_t oid;
+ short range; /* to define a range of oid */
+ short size; /* max size of the associated data */
+ char flags;
+};
+
+union oid_res_t {
+ void *ptr;
+ u32 u;
+};
+
+#define IWMAX_BITRATES 20
+#define IWMAX_BSS 24
+#define IWMAX_FREQ 30
+#define PRIV_STR_SIZE 1024
+
+#endif /* !defined(_ISL_OID_H) */
+/* EOF */
diff --git a/drivers/net/wireless/prism54/islpci_dev.c b/drivers/net/wireless/prism54/islpci_dev.c
new file mode 100644
index 0000000..efab07e
--- /dev/null
+++ b/drivers/net/wireless/prism54/islpci_dev.c
@@ -0,0 +1,956 @@
+/*
+ *
+ * Copyright (C) 2002 Intersil Americas Inc.
+ * Copyright (C) 2003 Herbert Valerio Riedel <hvr@gnu.org>
+ * Copyright (C) 2003 Luis R. Rodriguez <mcgrof@ruslug.rutgers.edu>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <linux/version.h>
+#include <linux/module.h>
+
+#include <linux/netdevice.h>
+#include <linux/pci.h>
+#include <linux/etherdevice.h>
+#include <linux/delay.h>
+#include <linux/if_arp.h>
+
+#include <asm/io.h>
+
+#include "prismcompat.h"
+#include "isl_38xx.h"
+#include "isl_ioctl.h"
+#include "islpci_dev.h"
+#include "islpci_mgt.h"
+#include "islpci_eth.h"
+#include "oid_mgt.h"
+
+#define ISL3877_IMAGE_FILE "isl3877"
+#define ISL3886_IMAGE_FILE "isl3886"
+#define ISL3890_IMAGE_FILE "isl3890"
+
+static int prism54_bring_down(islpci_private *);
+static int islpci_alloc_memory(islpci_private *);
+static struct net_device_stats *islpci_statistics(struct net_device *);
+
+/* Temporary dummy MAC address to use until firmware is loaded.
+ * The idea there is that some tools (such as nameif) may query
+ * the MAC address before the netdev is 'open'. By using a valid
+ * OUI prefix, they can process the netdev properly.
+ * Of course, this is not the final/real MAC address. It doesn't
+ * matter, as you are suppose to be able to change it anytime via
+ * ndev->set_mac_address. Jean II */
+static const unsigned char dummy_mac[6] = { 0x00, 0x30, 0xB4, 0x00, 0x00, 0x00 };
+
+static int
+isl_upload_firmware(islpci_private *priv)
+{
+ u32 reg, rc;
+ void __iomem *device_base = priv->device_base;
+
+ /* clear the RAMBoot and the Reset bit */
+ reg = readl(device_base + ISL38XX_CTRL_STAT_REG);
+ reg &= ~ISL38XX_CTRL_STAT_RESET;
+ reg &= ~ISL38XX_CTRL_STAT_RAMBOOT;
+ writel(reg, device_base + ISL38XX_CTRL_STAT_REG);
+ wmb();
+ udelay(ISL38XX_WRITEIO_DELAY);
+
+ /* set the Reset bit without reading the register ! */
+ reg |= ISL38XX_CTRL_STAT_RESET;
+ writel(reg, device_base + ISL38XX_CTRL_STAT_REG);
+ wmb();
+ udelay(ISL38XX_WRITEIO_DELAY);
+
+ /* clear the Reset bit */
+ reg &= ~ISL38XX_CTRL_STAT_RESET;
+ writel(reg, device_base + ISL38XX_CTRL_STAT_REG);
+ wmb();
+
+ /* wait a while for the device to reboot */
+ mdelay(50);
+
+ {
+ const struct firmware *fw_entry = NULL;
+ long fw_len;
+ const u32 *fw_ptr;
+
+ rc = request_firmware(&fw_entry, priv->firmware, PRISM_FW_PDEV);
+ if (rc) {
+ printk(KERN_ERR
+ "%s: request_firmware() failed for '%s'\n",
+ "prism54", priv->firmware);
+ return rc;
+ }
+ /* prepare the Direct Memory Base register */
+ reg = ISL38XX_DEV_FIRMWARE_ADDRES;
+
+ fw_ptr = (u32 *) fw_entry->data;
+ fw_len = fw_entry->size;
+
+ if (fw_len % 4) {
+ printk(KERN_ERR
+ "%s: firmware '%s' size is not multiple of 32bit, aborting!\n",
+ "prism54", priv->firmware);
+ release_firmware(fw_entry);
+ return -EILSEQ; /* Illegal byte sequence */;
+ }
+
+ while (fw_len > 0) {
+ long _fw_len =
+ (fw_len >
+ ISL38XX_MEMORY_WINDOW_SIZE) ?
+ ISL38XX_MEMORY_WINDOW_SIZE : fw_len;
+ u32 __iomem *dev_fw_ptr = device_base + ISL38XX_DIRECT_MEM_WIN;
+
+ /* set the cards base address for writting the data */
+ isl38xx_w32_flush(device_base, reg,
+ ISL38XX_DIR_MEM_BASE_REG);
+ wmb(); /* be paranoid */
+
+ /* increment the write address for next iteration */
+ reg += _fw_len;
+ fw_len -= _fw_len;
+
+ /* write the data to the Direct Memory Window 32bit-wise */
+ /* memcpy_toio() doesn't guarantee 32bit writes :-| */
+ while (_fw_len > 0) {
+ /* use non-swapping writel() */
+ __raw_writel(*fw_ptr, dev_fw_ptr);
+ fw_ptr++, dev_fw_ptr++;
+ _fw_len -= 4;
+ }
+
+ /* flush PCI posting */
+ (void) readl(device_base + ISL38XX_PCI_POSTING_FLUSH);
+ wmb(); /* be paranoid again */
+
+ BUG_ON(_fw_len != 0);
+ }
+
+ BUG_ON(fw_len != 0);
+
+ /* Firmware version is at offset 40 (also for "newmac") */
+ printk(KERN_DEBUG "%s: firmware version: %.8s\n",
+ priv->ndev->name, fw_entry->data + 40);
+
+ release_firmware(fw_entry);
+ }
+
+ /* now reset the device
+ * clear the Reset & ClkRun bit, set the RAMBoot bit */
+ reg = readl(device_base + ISL38XX_CTRL_STAT_REG);
+ reg &= ~ISL38XX_CTRL_STAT_CLKRUN;
+ reg &= ~ISL38XX_CTRL_STAT_RESET;
+ reg |= ISL38XX_CTRL_STAT_RAMBOOT;
+ isl38xx_w32_flush(device_base, reg, ISL38XX_CTRL_STAT_REG);
+ wmb();
+ udelay(ISL38XX_WRITEIO_DELAY);
+
+ /* set the reset bit latches the host override and RAMBoot bits
+ * into the device for operation when the reset bit is reset */
+ reg |= ISL38XX_CTRL_STAT_RESET;
+ writel(reg, device_base + ISL38XX_CTRL_STAT_REG);
+ /* don't do flush PCI posting here! */
+ wmb();
+ udelay(ISL38XX_WRITEIO_DELAY);
+
+ /* clear the reset bit should start the whole circus */
+ reg &= ~ISL38XX_CTRL_STAT_RESET;
+ writel(reg, device_base + ISL38XX_CTRL_STAT_REG);
+ /* don't do flush PCI posting here! */
+ wmb();
+ udelay(ISL38XX_WRITEIO_DELAY);
+
+ return 0;
+}
+
+/******************************************************************************
+ Device Interrupt Handler
+******************************************************************************/
+
+irqreturn_t
+islpci_interrupt(int irq, void *config, struct pt_regs *regs)
+{
+ u32 reg;
+ islpci_private *priv = config;
+ struct net_device *ndev = priv->ndev;
+ void __iomem *device = priv->device_base;
+ int powerstate = ISL38XX_PSM_POWERSAVE_STATE;
+
+ /* lock the interrupt handler */
+ spin_lock(&priv->slock);
+
+ /* received an interrupt request on a shared IRQ line
+ * first check whether the device is in sleep mode */
+ reg = readl(device + ISL38XX_CTRL_STAT_REG);
+ if (reg & ISL38XX_CTRL_STAT_SLEEPMODE)
+ /* device is in sleep mode, IRQ was generated by someone else */
+ {
+#if VERBOSE > SHOW_ERROR_MESSAGES
+ DEBUG(SHOW_TRACING, "Assuming someone else called the IRQ\n");
+#endif
+ spin_unlock(&priv->slock);
+ return IRQ_NONE;
+ }
+
+
+ /* check whether there is any source of interrupt on the device */
+ reg = readl(device + ISL38XX_INT_IDENT_REG);
+
+ /* also check the contents of the Interrupt Enable Register, because this
+ * will filter out interrupt sources from other devices on the same irq ! */
+ reg &= readl(device + ISL38XX_INT_EN_REG);
+ reg &= ISL38XX_INT_SOURCES;
+
+ if (reg != 0) {
+ if (islpci_get_state(priv) != PRV_STATE_SLEEP)
+ powerstate = ISL38XX_PSM_ACTIVE_STATE;
+
+ /* reset the request bits in the Identification register */
+ isl38xx_w32_flush(device, reg, ISL38XX_INT_ACK_REG);
+
+#if VERBOSE > SHOW_ERROR_MESSAGES
+ DEBUG(SHOW_FUNCTION_CALLS,
+ "IRQ: Identification register 0x%p 0x%x \n", device, reg);
+#endif
+
+ /* check for each bit in the register separately */
+ if (reg & ISL38XX_INT_IDENT_UPDATE) {
+#if VERBOSE > SHOW_ERROR_MESSAGES
+ /* Queue has been updated */
+ DEBUG(SHOW_TRACING, "IRQ: Update flag \n");
+
+ DEBUG(SHOW_QUEUE_INDEXES,
+ "CB drv Qs: [%i][%i][%i][%i][%i][%i]\n",
+ le32_to_cpu(priv->control_block->
+ driver_curr_frag[0]),
+ le32_to_cpu(priv->control_block->
+ driver_curr_frag[1]),
+ le32_to_cpu(priv->control_block->
+ driver_curr_frag[2]),
+ le32_to_cpu(priv->control_block->
+ driver_curr_frag[3]),
+ le32_to_cpu(priv->control_block->
+ driver_curr_frag[4]),
+ le32_to_cpu(priv->control_block->
+ driver_curr_frag[5])
+ );
+
+ DEBUG(SHOW_QUEUE_INDEXES,
+ "CB dev Qs: [%i][%i][%i][%i][%i][%i]\n",
+ le32_to_cpu(priv->control_block->
+ device_curr_frag[0]),
+ le32_to_cpu(priv->control_block->
+ device_curr_frag[1]),
+ le32_to_cpu(priv->control_block->
+ device_curr_frag[2]),
+ le32_to_cpu(priv->control_block->
+ device_curr_frag[3]),
+ le32_to_cpu(priv->control_block->
+ device_curr_frag[4]),
+ le32_to_cpu(priv->control_block->
+ device_curr_frag[5])
+ );
+#endif
+
+ /* cleanup the data low transmit queue */
+ islpci_eth_cleanup_transmit(priv, priv->control_block);
+
+ /* device is in active state, update the
+ * powerstate flag if necessary */
+ powerstate = ISL38XX_PSM_ACTIVE_STATE;
+
+ /* check all three queues in priority order
+ * call the PIMFOR receive function until the
+ * queue is empty */
+ if (isl38xx_in_queue(priv->control_block,
+ ISL38XX_CB_RX_MGMTQ) != 0) {
+#if VERBOSE > SHOW_ERROR_MESSAGES
+ DEBUG(SHOW_TRACING,
+ "Received frame in Management Queue\n");
+#endif
+ islpci_mgt_receive(ndev);
+
+ islpci_mgt_cleanup_transmit(ndev);
+
+ /* Refill slots in receive queue */
+ islpci_mgmt_rx_fill(ndev);
+
+ /* no need to trigger the device, next
+ islpci_mgt_transaction does it */
+ }
+
+ while (isl38xx_in_queue(priv->control_block,
+ ISL38XX_CB_RX_DATA_LQ) != 0) {
+#if VERBOSE > SHOW_ERROR_MESSAGES
+ DEBUG(SHOW_TRACING,
+ "Received frame in Data Low Queue \n");
+#endif
+ islpci_eth_receive(priv);
+ }
+
+ /* check whether the data transmit queues were full */
+ if (priv->data_low_tx_full) {
+ /* check whether the transmit is not full anymore */
+ if (ISL38XX_CB_TX_QSIZE -
+ isl38xx_in_queue(priv->control_block,
+ ISL38XX_CB_TX_DATA_LQ) >=
+ ISL38XX_MIN_QTHRESHOLD) {
+ /* nope, the driver is ready for more network frames */
+ netif_wake_queue(priv->ndev);
+
+ /* reset the full flag */
+ priv->data_low_tx_full = 0;
+ }
+ }
+ }
+
+ if (reg & ISL38XX_INT_IDENT_INIT) {
+ /* Device has been initialized */
+#if VERBOSE > SHOW_ERROR_MESSAGES
+ DEBUG(SHOW_TRACING,
+ "IRQ: Init flag, device initialized \n");
+#endif
+ wake_up(&priv->reset_done);
+ }
+
+ if (reg & ISL38XX_INT_IDENT_SLEEP) {
+ /* Device intends to move to powersave state */
+#if VERBOSE > SHOW_ERROR_MESSAGES
+ DEBUG(SHOW_TRACING, "IRQ: Sleep flag \n");
+#endif
+ isl38xx_handle_sleep_request(priv->control_block,
+ &powerstate,
+ priv->device_base);
+ }
+
+ if (reg & ISL38XX_INT_IDENT_WAKEUP) {
+ /* Device has been woken up to active state */
+#if VERBOSE > SHOW_ERROR_MESSAGES
+ DEBUG(SHOW_TRACING, "IRQ: Wakeup flag \n");
+#endif
+
+ isl38xx_handle_wakeup(priv->control_block,
+ &powerstate, priv->device_base);
+ }
+ } else {
+#if VERBOSE > SHOW_ERROR_MESSAGES
+ DEBUG(SHOW_TRACING, "Assuming someone else called the IRQ\n");
+#endif
+ spin_unlock(&priv->slock);
+ return IRQ_NONE;
+ }
+
+ /* sleep -> ready */
+ if (islpci_get_state(priv) == PRV_STATE_SLEEP
+ && powerstate == ISL38XX_PSM_ACTIVE_STATE)
+ islpci_set_state(priv, PRV_STATE_READY);
+
+ /* !sleep -> sleep */
+ if (islpci_get_state(priv) != PRV_STATE_SLEEP
+ && powerstate == ISL38XX_PSM_POWERSAVE_STATE)
+ islpci_set_state(priv, PRV_STATE_SLEEP);
+
+ /* unlock the interrupt handler */
+ spin_unlock(&priv->slock);
+
+ return IRQ_HANDLED;
+}
+
+/******************************************************************************
+ Network Interface Control & Statistical functions
+******************************************************************************/
+static int
+islpci_open(struct net_device *ndev)
+{
+ u32 rc;
+ islpci_private *priv = netdev_priv(ndev);
+
+ /* reset data structures, upload firmware and reset device */
+ rc = islpci_reset(priv,1);
+ if (rc) {
+ prism54_bring_down(priv);
+ return rc; /* Returns informative message */
+ }
+
+ netif_start_queue(ndev);
+/* netif_mark_up( ndev ); */
+
+ return 0;
+}
+
+static int
+islpci_close(struct net_device *ndev)
+{
+ islpci_private *priv = netdev_priv(ndev);
+
+ printk(KERN_DEBUG "%s: islpci_close ()\n", ndev->name);
+
+ netif_stop_queue(ndev);
+
+ return prism54_bring_down(priv);
+}
+
+static int
+prism54_bring_down(islpci_private *priv)
+{
+ void __iomem *device_base = priv->device_base;
+ u32 reg;
+ /* we are going to shutdown the device */
+ islpci_set_state(priv, PRV_STATE_PREBOOT);
+
+ /* disable all device interrupts in case they weren't */
+ isl38xx_disable_interrupts(priv->device_base);
+
+ /* For safety reasons, we may want to ensure that no DMA transfer is
+ * currently in progress by emptying the TX and RX queues. */
+
+ /* wait until interrupts have finished executing on other CPUs */
+ synchronize_irq(priv->pdev->irq);
+
+ reg = readl(device_base + ISL38XX_CTRL_STAT_REG);
+ reg &= ~(ISL38XX_CTRL_STAT_RESET | ISL38XX_CTRL_STAT_RAMBOOT);
+ writel(reg, device_base + ISL38XX_CTRL_STAT_REG);
+ wmb();
+ udelay(ISL38XX_WRITEIO_DELAY);
+
+ reg |= ISL38XX_CTRL_STAT_RESET;
+ writel(reg, device_base + ISL38XX_CTRL_STAT_REG);
+ wmb();
+ udelay(ISL38XX_WRITEIO_DELAY);
+
+ /* clear the Reset bit */
+ reg &= ~ISL38XX_CTRL_STAT_RESET;
+ writel(reg, device_base + ISL38XX_CTRL_STAT_REG);
+ wmb();
+
+ /* wait a while for the device to reset */
+ set_current_state(TASK_UNINTERRUPTIBLE);
+ schedule_timeout(50*HZ/1000);
+
+ return 0;
+}
+
+static int
+islpci_upload_fw(islpci_private *priv)
+{
+ islpci_state_t old_state;
+ u32 rc;
+
+ old_state = islpci_set_state(priv, PRV_STATE_BOOT);
+
+ printk(KERN_DEBUG "%s: uploading firmware...\n", priv->ndev->name);
+
+ rc = isl_upload_firmware(priv);
+ if (rc) {
+ /* error uploading the firmware */
+ printk(KERN_ERR "%s: could not upload firmware ('%s')\n",
+ priv->ndev->name, priv->firmware);
+
+ islpci_set_state(priv, old_state);
+ return rc;
+ }
+
+ printk(KERN_DEBUG "%s: firmware upload complete\n",
+ priv->ndev->name);
+
+ islpci_set_state(priv, PRV_STATE_POSTBOOT);
+
+ return 0;
+}
+
+static int
+islpci_reset_if(islpci_private *priv)
+{
+ long remaining;
+ int result = -ETIME;
+ int count;
+
+ DEFINE_WAIT(wait);
+ prepare_to_wait(&priv->reset_done, &wait, TASK_UNINTERRUPTIBLE);
+
+ /* now the last step is to reset the interface */
+ isl38xx_interface_reset(priv->device_base, priv->device_host_address);
+ islpci_set_state(priv, PRV_STATE_PREINIT);
+
+ for(count = 0; count < 2 && result; count++) {
+ /* The software reset acknowledge needs about 220 msec here.
+ * Be conservative and wait for up to one second. */
+
+ set_current_state(TASK_UNINTERRUPTIBLE);
+ remaining = schedule_timeout(HZ);
+
+ if(remaining > 0) {
+ result = 0;
+ break;
+ }
+
+ /* If we're here it's because our IRQ hasn't yet gone through.
+ * Retry a bit more...
+ */
+ printk(KERN_ERR "%s: no 'reset complete' IRQ seen - retrying\n",
+ priv->ndev->name);
+ }
+
+ finish_wait(&priv->reset_done, &wait);
+
+ if (result) {
+ printk(KERN_ERR "%s: interface reset failure\n", priv->ndev->name);
+ return result;
+ }
+
+ islpci_set_state(priv, PRV_STATE_INIT);
+
+ /* Now that the device is 100% up, let's allow
+ * for the other interrupts --
+ * NOTE: this is not *yet* true since we've only allowed the
+ * INIT interrupt on the IRQ line. We can perhaps poll
+ * the IRQ line until we know for sure the reset went through */
+ isl38xx_enable_common_interrupts(priv->device_base);
+
+ down_write(&priv->mib_sem);
+ result = mgt_commit(priv);
+ if (result) {
+ printk(KERN_ERR "%s: interface reset failure\n", priv->ndev->name);
+ up_write(&priv->mib_sem);
+ return result;
+ }
+ up_write(&priv->mib_sem);
+
+ islpci_set_state(priv, PRV_STATE_READY);
+
+ printk(KERN_DEBUG "%s: interface reset complete\n", priv->ndev->name);
+ return 0;
+}
+
+int
+islpci_reset(islpci_private *priv, int reload_firmware)
+{
+ isl38xx_control_block *cb = /* volatile not needed */
+ (isl38xx_control_block *) priv->control_block;
+ unsigned counter;
+ int rc;
+
+ if (reload_firmware)
+ islpci_set_state(priv, PRV_STATE_PREBOOT);
+ else
+ islpci_set_state(priv, PRV_STATE_POSTBOOT);
+
+ printk(KERN_DEBUG "%s: resetting device...\n", priv->ndev->name);
+
+ /* disable all device interrupts in case they weren't */
+ isl38xx_disable_interrupts(priv->device_base);
+
+ /* flush all management queues */
+ priv->index_mgmt_tx = 0;
+ priv->index_mgmt_rx = 0;
+
+ /* clear the indexes in the frame pointer */
+ for (counter = 0; counter < ISL38XX_CB_QCOUNT; counter++) {
+ cb->driver_curr_frag[counter] = cpu_to_le32(0);
+ cb->device_curr_frag[counter] = cpu_to_le32(0);
+ }
+
+ /* reset the mgmt receive queue */
+ for (counter = 0; counter < ISL38XX_CB_MGMT_QSIZE; counter++) {
+ isl38xx_fragment *frag = &cb->rx_data_mgmt[counter];
+ frag->size = cpu_to_le16(MGMT_FRAME_SIZE);
+ frag->flags = 0;
+ frag->address = cpu_to_le32(priv->mgmt_rx[counter].pci_addr);
+ }
+
+ for (counter = 0; counter < ISL38XX_CB_RX_QSIZE; counter++) {
+ cb->rx_data_low[counter].address =
+ cpu_to_le32((u32) priv->pci_map_rx_address[counter]);
+ }
+
+ /* since the receive queues are filled with empty fragments, now we can
+ * set the corresponding indexes in the Control Block */
+ priv->control_block->driver_curr_frag[ISL38XX_CB_RX_DATA_LQ] =
+ cpu_to_le32(ISL38XX_CB_RX_QSIZE);
+ priv->control_block->driver_curr_frag[ISL38XX_CB_RX_MGMTQ] =
+ cpu_to_le32(ISL38XX_CB_MGMT_QSIZE);
+
+ /* reset the remaining real index registers and full flags */
+ priv->free_data_rx = 0;
+ priv->free_data_tx = 0;
+ priv->data_low_tx_full = 0;
+
+ if (reload_firmware) { /* Should we load the firmware ? */
+ /* now that the data structures are cleaned up, upload
+ * firmware and reset interface */
+ rc = islpci_upload_fw(priv);
+ if (rc) {
+ printk(KERN_ERR "%s: islpci_reset: failure\n",
+ priv->ndev->name);
+ return rc;
+ }
+ }
+
+ /* finally reset interface */
+ rc = islpci_reset_if(priv);
+ if (rc)
+ printk(KERN_ERR "prism54: Your card/socket may be faulty, or IRQ line too busy :(\n");
+ return rc;
+}
+
+static struct net_device_stats *
+islpci_statistics(struct net_device *ndev)
+{
+ islpci_private *priv = netdev_priv(ndev);
+
+#if VERBOSE > SHOW_ERROR_MESSAGES
+ DEBUG(SHOW_FUNCTION_CALLS, "islpci_statistics\n");
+#endif
+
+ return &priv->statistics;
+}
+
+/******************************************************************************
+ Network device configuration functions
+******************************************************************************/
+static int
+islpci_alloc_memory(islpci_private *priv)
+{
+ int counter;
+
+#if VERBOSE > SHOW_ERROR_MESSAGES
+ printk(KERN_DEBUG "islpci_alloc_memory\n");
+#endif
+
+ /* remap the PCI device base address to accessable */
+ if (!(priv->device_base =
+ ioremap(pci_resource_start(priv->pdev, 0),
+ ISL38XX_PCI_MEM_SIZE))) {
+ /* error in remapping the PCI device memory address range */
+ printk(KERN_ERR "PCI memory remapping failed \n");
+ return -1;
+ }
+
+ /* memory layout for consistent DMA region:
+ *
+ * Area 1: Control Block for the device interface
+ * Area 2: Power Save Mode Buffer for temporary frame storage. Be aware that
+ * the number of supported stations in the AP determines the minimal
+ * size of the buffer !
+ */
+
+ /* perform the allocation */
+ priv->driver_mem_address = pci_alloc_consistent(priv->pdev,
+ HOST_MEM_BLOCK,
+ &priv->
+ device_host_address);
+
+ if (!priv->driver_mem_address) {
+ /* error allocating the block of PCI memory */
+ printk(KERN_ERR "%s: could not allocate DMA memory, aborting!",
+ "prism54");
+ return -1;
+ }
+
+ /* assign the Control Block to the first address of the allocated area */
+ priv->control_block =
+ (isl38xx_control_block *) priv->driver_mem_address;
+
+ /* set the Power Save Buffer pointer directly behind the CB */
+ priv->device_psm_buffer =
+ priv->device_host_address + CONTROL_BLOCK_SIZE;
+
+ /* make sure all buffer pointers are initialized */
+ for (counter = 0; counter < ISL38XX_CB_QCOUNT; counter++) {
+ priv->control_block->driver_curr_frag[counter] = cpu_to_le32(0);
+ priv->control_block->device_curr_frag[counter] = cpu_to_le32(0);
+ }
+
+ priv->index_mgmt_rx = 0;
+ memset(priv->mgmt_rx, 0, sizeof(priv->mgmt_rx));
+ memset(priv->mgmt_tx, 0, sizeof(priv->mgmt_tx));
+
+ /* allocate rx queue for management frames */
+ if (islpci_mgmt_rx_fill(priv->ndev) < 0)
+ goto out_free;
+
+ /* now get the data rx skb's */
+ memset(priv->data_low_rx, 0, sizeof (priv->data_low_rx));
+ memset(priv->pci_map_rx_address, 0, sizeof (priv->pci_map_rx_address));
+
+ for (counter = 0; counter < ISL38XX_CB_RX_QSIZE; counter++) {
+ struct sk_buff *skb;
+
+ /* allocate an sk_buff for received data frames storage
+ * each frame on receive size consists of 1 fragment
+ * include any required allignment operations */
+ if (!(skb = dev_alloc_skb(MAX_FRAGMENT_SIZE_RX + 2))) {
+ /* error allocating an sk_buff structure elements */
+ printk(KERN_ERR "Error allocating skb.\n");
+ skb = NULL;
+ goto out_free;
+ }
+ skb_reserve(skb, (4 - (long) skb->data) & 0x03);
+ /* add the new allocated sk_buff to the buffer array */
+ priv->data_low_rx[counter] = skb;
+
+ /* map the allocated skb data area to pci */
+ priv->pci_map_rx_address[counter] =
+ pci_map_single(priv->pdev, (void *) skb->data,
+ MAX_FRAGMENT_SIZE_RX + 2,
+ PCI_DMA_FROMDEVICE);
+ if (!priv->pci_map_rx_address[counter]) {
+ /* error mapping the buffer to device
+ accessable memory address */
+ printk(KERN_ERR "failed to map skb DMA'able\n");
+ goto out_free;
+ }
+ }
+
+ prism54_acl_init(&priv->acl);
+ prism54_wpa_ie_init(priv);
+ if (mgt_init(priv))
+ goto out_free;
+
+ return 0;
+ out_free:
+ islpci_free_memory(priv);
+ return -1;
+}
+
+int
+islpci_free_memory(islpci_private *priv)
+{
+ int counter;
+
+ if (priv->device_base)
+ iounmap(priv->device_base);
+ priv->device_base = NULL;
+
+ /* free consistent DMA area... */
+ if (priv->driver_mem_address)
+ pci_free_consistent(priv->pdev, HOST_MEM_BLOCK,
+ priv->driver_mem_address,
+ priv->device_host_address);
+
+ /* clear some dangling pointers */
+ priv->driver_mem_address = NULL;
+ priv->device_host_address = 0;
+ priv->device_psm_buffer = 0;
+ priv->control_block = NULL;
+
+ /* clean up mgmt rx buffers */
+ for (counter = 0; counter < ISL38XX_CB_MGMT_QSIZE; counter++) {
+ struct islpci_membuf *buf = &priv->mgmt_rx[counter];
+ if (buf->pci_addr)
+ pci_unmap_single(priv->pdev, buf->pci_addr,
+ buf->size, PCI_DMA_FROMDEVICE);
+ buf->pci_addr = 0;
+ if (buf->mem)
+ kfree(buf->mem);
+ buf->size = 0;
+ buf->mem = NULL;
+ }
+
+ /* clean up data rx buffers */
+ for (counter = 0; counter < ISL38XX_CB_RX_QSIZE; counter++) {
+ if (priv->pci_map_rx_address[counter])
+ pci_unmap_single(priv->pdev,
+ priv->pci_map_rx_address[counter],
+ MAX_FRAGMENT_SIZE_RX + 2,
+ PCI_DMA_FROMDEVICE);
+ priv->pci_map_rx_address[counter] = 0;
+
+ if (priv->data_low_rx[counter])
+ dev_kfree_skb(priv->data_low_rx[counter]);
+ priv->data_low_rx[counter] = NULL;
+ }
+
+ /* Free the acces control list and the WPA list */
+ prism54_acl_clean(&priv->acl);
+ prism54_wpa_ie_clean(priv);
+ mgt_clean(priv);
+
+ return 0;
+}
+
+#if 0
+static void
+islpci_set_multicast_list(struct net_device *dev)
+{
+ /* put device into promisc mode and let network layer handle it */
+}
+#endif
+
+struct net_device *
+islpci_setup(struct pci_dev *pdev)
+{
+ islpci_private *priv;
+ struct net_device *ndev = alloc_etherdev(sizeof (islpci_private));
+
+ if (!ndev)
+ return ndev;
+
+ SET_MODULE_OWNER(ndev);
+ pci_set_drvdata(pdev, ndev);
+#if defined(SET_NETDEV_DEV)
+ SET_NETDEV_DEV(ndev, &pdev->dev);
+#endif
+
+ /* setup the structure members */
+ ndev->base_addr = pci_resource_start(pdev, 0);
+ ndev->irq = pdev->irq;
+
+ /* initialize the function pointers */
+ ndev->open = &islpci_open;
+ ndev->stop = &islpci_close;
+ ndev->get_stats = &islpci_statistics;
+ ndev->get_wireless_stats = &prism54_get_wireless_stats;
+ ndev->do_ioctl = &prism54_ioctl;
+ ndev->wireless_handlers =
+ (struct iw_handler_def *) &prism54_handler_def;
+
+ ndev->hard_start_xmit = &islpci_eth_transmit;
+ /* ndev->set_multicast_list = &islpci_set_multicast_list; */
+ ndev->addr_len = ETH_ALEN;
+ ndev->set_mac_address = &prism54_set_mac_address;
+ /* Get a non-zero dummy MAC address for nameif. Jean II */
+ memcpy(ndev->dev_addr, dummy_mac, 6);
+
+#ifdef HAVE_TX_TIMEOUT
+ ndev->watchdog_timeo = ISLPCI_TX_TIMEOUT;
+ ndev->tx_timeout = &islpci_eth_tx_timeout;
+#endif
+
+ /* allocate a private device structure to the network device */
+ priv = netdev_priv(ndev);
+ priv->ndev = ndev;
+ priv->pdev = pdev;
+ priv->monitor_type = ARPHRD_IEEE80211;
+ priv->ndev->type = (priv->iw_mode == IW_MODE_MONITOR) ?
+ priv->monitor_type : ARPHRD_ETHER;
+
+#if WIRELESS_EXT > 16
+ /* Add pointers to enable iwspy support. */
+ priv->wireless_data.spy_data = &priv->spy_data;
+ ndev->wireless_data = &priv->wireless_data;
+#endif /* WIRELESS_EXT > 16 */
+
+ /* save the start and end address of the PCI memory area */
+ ndev->mem_start = (unsigned long) priv->device_base;
+ ndev->mem_end = ndev->mem_start + ISL38XX_PCI_MEM_SIZE;
+
+#if VERBOSE > SHOW_ERROR_MESSAGES
+ DEBUG(SHOW_TRACING, "PCI Memory remapped to 0x%p\n", priv->device_base);
+#endif
+
+ init_waitqueue_head(&priv->reset_done);
+
+ /* init the queue read locks, process wait counter */
+ sema_init(&priv->mgmt_sem, 1);
+ priv->mgmt_received = NULL;
+ init_waitqueue_head(&priv->mgmt_wqueue);
+ sema_init(&priv->stats_sem, 1);
+ spin_lock_init(&priv->slock);
+
+ /* init state machine with off#1 state */
+ priv->state = PRV_STATE_OFF;
+ priv->state_off = 1;
+
+ /* initialize workqueue's */
+ INIT_WORK(&priv->stats_work,
+ (void (*)(void *)) prism54_update_stats, priv);
+ priv->stats_timestamp = 0;
+
+ INIT_WORK(&priv->reset_task, islpci_do_reset_and_wake, priv);
+ priv->reset_task_pending = 0;
+
+ /* allocate various memory areas */
+ if (islpci_alloc_memory(priv))
+ goto do_free_netdev;
+
+ /* select the firmware file depending on the device id */
+ switch (pdev->device) {
+ case 0x3877:
+ strcpy(priv->firmware, ISL3877_IMAGE_FILE);
+ break;
+
+ case 0x3886:
+ strcpy(priv->firmware, ISL3886_IMAGE_FILE);
+ break;
+
+ default:
+ strcpy(priv->firmware, ISL3890_IMAGE_FILE);
+ break;
+ }
+
+ if (register_netdev(ndev)) {
+ DEBUG(SHOW_ERROR_MESSAGES,
+ "ERROR: register_netdev() failed \n");
+ goto do_islpci_free_memory;
+ }
+
+ return ndev;
+
+ do_islpci_free_memory:
+ islpci_free_memory(priv);
+ do_free_netdev:
+ pci_set_drvdata(pdev, NULL);
+ free_netdev(ndev);
+ priv = NULL;
+ return NULL;
+}
+
+islpci_state_t
+islpci_set_state(islpci_private *priv, islpci_state_t new_state)
+{
+ islpci_state_t old_state;
+
+ /* lock */
+ old_state = priv->state;
+
+ /* this means either a race condition or some serious error in
+ * the driver code */
+ switch (new_state) {
+ case PRV_STATE_OFF:
+ priv->state_off++;
+ default:
+ priv->state = new_state;
+ break;
+
+ case PRV_STATE_PREBOOT:
+ /* there are actually many off-states, enumerated by
+ * state_off */
+ if (old_state == PRV_STATE_OFF)
+ priv->state_off--;
+
+ /* only if hw_unavailable is zero now it means we either
+ * were in off#1 state, or came here from
+ * somewhere else */
+ if (!priv->state_off)
+ priv->state = new_state;
+ break;
+ };
+#if 0
+ printk(KERN_DEBUG "%s: state transition %d -> %d (off#%d)\n",
+ priv->ndev->name, old_state, new_state, priv->state_off);
+#endif
+
+ /* invariants */
+ BUG_ON(priv->state_off < 0);
+ BUG_ON(priv->state_off && (priv->state != PRV_STATE_OFF));
+ BUG_ON(!priv->state_off && (priv->state == PRV_STATE_OFF));
+
+ /* unlock */
+ return old_state;
+}
diff --git a/drivers/net/wireless/prism54/islpci_dev.h b/drivers/net/wireless/prism54/islpci_dev.h
new file mode 100644
index 0000000..32a1019
--- /dev/null
+++ b/drivers/net/wireless/prism54/islpci_dev.h
@@ -0,0 +1,216 @@
+/*
+ *
+ * Copyright (C) 2002 Intersil Americas Inc.
+ * Copyright (C) 2003 Herbert Valerio Riedel <hvr@gnu.org>
+ * Copyright (C) 2003 Luis R. Rodriguez <mcgrof@ruslug.rutgers.edu>
+ * Copyright (C) 2003 Aurelien Alleaume <slts@free.fr>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef _ISLPCI_DEV_H
+#define _ISLPCI_DEV_H
+
+#include <linux/version.h>
+#include <linux/netdevice.h>
+#include <linux/wireless.h>
+#include <net/iw_handler.h>
+#include <linux/list.h>
+
+#include "isl_38xx.h"
+#include "isl_oid.h"
+#include "islpci_mgt.h"
+
+/* some states might not be superflous and may be removed when
+ design is finalized (hvr) */
+typedef enum {
+ PRV_STATE_OFF = 0, /* this means hw_unavailable is != 0 */
+ PRV_STATE_PREBOOT, /* we are in a pre-boot state (empty RAM) */
+ PRV_STATE_BOOT, /* boot state (fw upload, run fw) */
+ PRV_STATE_POSTBOOT, /* after boot state, need reset now */
+ PRV_STATE_PREINIT, /* pre-init state */
+ PRV_STATE_INIT, /* init state (restore MIB backup to device) */
+ PRV_STATE_READY, /* driver&device are in operational state */
+ PRV_STATE_SLEEP /* device in sleep mode */
+} islpci_state_t;
+
+/* ACL using MAC address */
+struct mac_entry {
+ struct list_head _list;
+ char addr[ETH_ALEN];
+};
+
+struct islpci_acl {
+ enum { MAC_POLICY_OPEN=0, MAC_POLICY_ACCEPT=1, MAC_POLICY_REJECT=2 } policy;
+ struct list_head mac_list; /* a list of mac_entry */
+ int size; /* size of queue */
+ struct semaphore sem; /* accessed in ioctls and trap_work */
+};
+
+struct islpci_membuf {
+ int size; /* size of memory */
+ void *mem; /* address of memory as seen by CPU */
+ dma_addr_t pci_addr; /* address of memory as seen by device */
+};
+
+#define MAX_BSS_WPA_IE_COUNT 64
+#define MAX_WPA_IE_LEN 64
+struct islpci_bss_wpa_ie {
+ struct list_head list;
+ unsigned long last_update;
+ u8 bssid[ETH_ALEN];
+ u8 wpa_ie[MAX_WPA_IE_LEN];
+ size_t wpa_ie_len;
+
+};
+
+typedef struct {
+ spinlock_t slock; /* generic spinlock; */
+
+ u32 priv_oid;
+
+ /* our mib cache */
+ u32 iw_mode;
+ struct rw_semaphore mib_sem;
+ void **mib;
+ char nickname[IW_ESSID_MAX_SIZE+1];
+
+ /* Take care of the wireless stats */
+ struct work_struct stats_work;
+ struct semaphore stats_sem;
+ /* remember when we last updated the stats */
+ unsigned long stats_timestamp;
+ /* The first is accessed under semaphore locking.
+ * The second is the clean one we return to iwconfig.
+ */
+ struct iw_statistics local_iwstatistics;
+ struct iw_statistics iwstatistics;
+
+ struct iw_spy_data spy_data; /* iwspy support */
+
+#if WIRELESS_EXT > 16
+ struct iw_public_data wireless_data;
+#endif /* WIRELESS_EXT > 16 */
+
+ int monitor_type; /* ARPHRD_IEEE80211 or ARPHRD_IEEE80211_PRISM */
+
+ struct islpci_acl acl;
+
+ /* PCI bus allocation & configuration members */
+ struct pci_dev *pdev; /* PCI structure information */
+ char firmware[33];
+
+ void __iomem *device_base; /* ioremapped device base address */
+
+ /* consistent DMA region */
+ void *driver_mem_address; /* base DMA address */
+ dma_addr_t device_host_address; /* base DMA address (bus address) */
+ dma_addr_t device_psm_buffer; /* host memory for PSM buffering (bus address) */
+
+ /* our network_device structure */
+ struct net_device *ndev;
+
+ /* device queue interface members */
+ struct isl38xx_cb *control_block; /* device control block
+ (== driver_mem_address!) */
+
+ /* Each queue has three indexes:
+ * free/index_mgmt/data_rx/tx (called index, see below),
+ * driver_curr_frag, and device_curr_frag (in the control block)
+ * All indexes are ever-increasing, but interpreted modulo the
+ * device queue size when used.
+ * index <= device_curr_frag <= driver_curr_frag at all times
+ * For rx queues, [index, device_curr_frag) contains fragments
+ * that the interrupt processing needs to handle (owned by driver).
+ * [device_curr_frag, driver_curr_frag) is the free space in the
+ * rx queue, waiting for data (owned by device). The driver
+ * increments driver_curr_frag to indicate to the device that more
+ * buffers are available.
+ * If device_curr_frag == driver_curr_frag, no more rx buffers are
+ * available, and the rx DMA engine of the device is halted.
+ * For tx queues, [index, device_curr_frag) contains fragments
+ * where tx is done; they need to be freed (owned by driver).
+ * [device_curr_frag, driver_curr_frag) contains the frames
+ * that are being transferred (owned by device). The driver
+ * increments driver_curr_frag to indicate that more tx work
+ * needs to be done.
+ */
+ u32 index_mgmt_rx; /* real index mgmt rx queue */
+ u32 index_mgmt_tx; /* read index mgmt tx queue */
+ u32 free_data_rx; /* free pointer data rx queue */
+ u32 free_data_tx; /* free pointer data tx queue */
+ u32 data_low_tx_full; /* full detected flag */
+
+ /* frame memory buffers for the device queues */
+ struct islpci_membuf mgmt_tx[ISL38XX_CB_MGMT_QSIZE];
+ struct islpci_membuf mgmt_rx[ISL38XX_CB_MGMT_QSIZE];
+ struct sk_buff *data_low_tx[ISL38XX_CB_TX_QSIZE];
+ struct sk_buff *data_low_rx[ISL38XX_CB_RX_QSIZE];
+ dma_addr_t pci_map_tx_address[ISL38XX_CB_TX_QSIZE];
+ dma_addr_t pci_map_rx_address[ISL38XX_CB_RX_QSIZE];
+
+ /* driver network interface members */
+ struct net_device_stats statistics;
+
+ /* wait for a reset interrupt */
+ wait_queue_head_t reset_done;
+
+ /* used by islpci_mgt_transaction */
+ struct semaphore mgmt_sem; /* serialize access to mailbox and wqueue */
+ struct islpci_mgmtframe *mgmt_received; /* mbox for incoming frame */
+ wait_queue_head_t mgmt_wqueue; /* waitqueue for mbox */
+
+ /* state machine */
+ islpci_state_t state;
+ int state_off; /* enumeration of off-state, if 0 then
+ * we're not in any off-state */
+
+ /* WPA stuff */
+ int wpa; /* WPA mode enabled */
+ struct list_head bss_wpa_list;
+ int num_bss_wpa;
+ struct semaphore wpa_sem;
+
+ struct work_struct reset_task;
+ int reset_task_pending;
+} islpci_private;
+
+static inline islpci_state_t
+islpci_get_state(islpci_private *priv)
+{
+ /* lock */
+ return priv->state;
+ /* unlock */
+}
+
+islpci_state_t islpci_set_state(islpci_private *priv, islpci_state_t new_state);
+
+#define ISLPCI_TX_TIMEOUT (2*HZ)
+
+irqreturn_t islpci_interrupt(int, void *, struct pt_regs *);
+
+int prism54_post_setup(islpci_private *, int);
+int islpci_reset(islpci_private *, int);
+
+static inline void
+islpci_trigger(islpci_private *priv)
+{
+ isl38xx_trigger_device(islpci_get_state(priv) == PRV_STATE_SLEEP,
+ priv->device_base);
+}
+
+int islpci_free_memory(islpci_private *);
+struct net_device *islpci_setup(struct pci_dev *);
+#endif /* _ISLPCI_DEV_H */
diff --git a/drivers/net/wireless/prism54/islpci_eth.c b/drivers/net/wireless/prism54/islpci_eth.c
new file mode 100644
index 0000000..5952e996
--- /dev/null
+++ b/drivers/net/wireless/prism54/islpci_eth.c
@@ -0,0 +1,519 @@
+/*
+ *
+ * Copyright (C) 2002 Intersil Americas Inc.
+ * Copyright (C) 2004 Aurelien Alleaume <slts@free.fr>
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <linux/version.h>
+#include <linux/module.h>
+
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/if_arp.h>
+
+#include "prismcompat.h"
+#include "isl_38xx.h"
+#include "islpci_eth.h"
+#include "islpci_mgt.h"
+#include "oid_mgt.h"
+
+/******************************************************************************
+ Network Interface functions
+******************************************************************************/
+void
+islpci_eth_cleanup_transmit(islpci_private *priv,
+ isl38xx_control_block *control_block)
+{
+ struct sk_buff *skb;
+ u32 index;
+
+ /* compare the control block read pointer with the free pointer */
+ while (priv->free_data_tx !=
+ le32_to_cpu(control_block->
+ device_curr_frag[ISL38XX_CB_TX_DATA_LQ])) {
+ /* read the index of the first fragment to be freed */
+ index = priv->free_data_tx % ISL38XX_CB_TX_QSIZE;
+
+ /* check for holes in the arrays caused by multi fragment frames
+ * searching for the last fragment of a frame */
+ if (priv->pci_map_tx_address[index] != (dma_addr_t) NULL) {
+ /* entry is the last fragment of a frame
+ * free the skb structure and unmap pci memory */
+ skb = priv->data_low_tx[index];
+
+#if VERBOSE > SHOW_ERROR_MESSAGES
+ DEBUG(SHOW_TRACING,
+ "cleanup skb %p skb->data %p skb->len %u truesize %u\n ",
+ skb, skb->data, skb->len, skb->truesize);
+#endif
+
+ pci_unmap_single(priv->pdev,
+ priv->pci_map_tx_address[index],
+ skb->len, PCI_DMA_TODEVICE);
+ dev_kfree_skb_irq(skb);
+ skb = NULL;
+ }
+ /* increment the free data low queue pointer */
+ priv->free_data_tx++;
+ }
+}
+
+int
+islpci_eth_transmit(struct sk_buff *skb, struct net_device *ndev)
+{
+ islpci_private *priv = netdev_priv(ndev);
+ isl38xx_control_block *cb = priv->control_block;
+ u32 index;
+ dma_addr_t pci_map_address;
+ int frame_size;
+ isl38xx_fragment *fragment;
+ int offset;
+ struct sk_buff *newskb;
+ int newskb_offset;
+ unsigned long flags;
+ unsigned char wds_mac[6];
+ u32 curr_frag;
+ int err = 0;
+
+#if VERBOSE > SHOW_ERROR_MESSAGES
+ DEBUG(SHOW_FUNCTION_CALLS, "islpci_eth_transmit \n");
+#endif
+
+ /* lock the driver code */
+ spin_lock_irqsave(&priv->slock, flags);
+
+ /* determine the amount of fragments needed to store the frame */
+
+ frame_size = skb->len < ETH_ZLEN ? ETH_ZLEN : skb->len;
+ if (init_wds)
+ frame_size += 6;
+
+ /* check whether the destination queue has enough fragments for the frame */
+ curr_frag = le32_to_cpu(cb->driver_curr_frag[ISL38XX_CB_TX_DATA_LQ]);
+ if (unlikely(curr_frag - priv->free_data_tx >= ISL38XX_CB_TX_QSIZE)) {
+ printk(KERN_ERR "%s: transmit device queue full when awake\n",
+ ndev->name);
+ netif_stop_queue(ndev);
+
+ /* trigger the device */
+ isl38xx_w32_flush(priv->device_base, ISL38XX_DEV_INT_UPDATE,
+ ISL38XX_DEV_INT_REG);
+ udelay(ISL38XX_WRITEIO_DELAY);
+
+ err = -EBUSY;
+ goto drop_free;
+ }
+ /* Check alignment and WDS frame formatting. The start of the packet should
+ * be aligned on a 4-byte boundary. If WDS is enabled add another 6 bytes
+ * and add WDS address information */
+ if (likely(((long) skb->data & 0x03) | init_wds)) {
+ /* get the number of bytes to add and re-allign */
+ offset = (4 - (long) skb->data) & 0x03;
+ offset += init_wds ? 6 : 0;
+
+ /* check whether the current skb can be used */
+ if (!skb_cloned(skb) && (skb_tailroom(skb) >= offset)) {
+ unsigned char *src = skb->data;
+
+#if VERBOSE > SHOW_ERROR_MESSAGES
+ DEBUG(SHOW_TRACING, "skb offset %i wds %i\n", offset,
+ init_wds);
+#endif
+
+ /* align the buffer on 4-byte boundary */
+ skb_reserve(skb, (4 - (long) skb->data) & 0x03);
+ if (init_wds) {
+ /* wds requires an additional address field of 6 bytes */
+ skb_put(skb, 6);
+#ifdef ISLPCI_ETH_DEBUG
+ printk("islpci_eth_transmit:wds_mac\n");
+#endif
+ memmove(skb->data + 6, src, skb->len);
+ memcpy(skb->data, wds_mac, 6);
+ } else {
+ memmove(skb->data, src, skb->len);
+ }
+
+#if VERBOSE > SHOW_ERROR_MESSAGES
+ DEBUG(SHOW_TRACING, "memmove %p %p %i \n", skb->data,
+ src, skb->len);
+#endif
+ } else {
+ newskb =
+ dev_alloc_skb(init_wds ? skb->len + 6 : skb->len);
+ if (unlikely(newskb == NULL)) {
+ printk(KERN_ERR "%s: Cannot allocate skb\n",
+ ndev->name);
+ err = -ENOMEM;
+ goto drop_free;
+ }
+ newskb_offset = (4 - (long) newskb->data) & 0x03;
+
+ /* Check if newskb->data is aligned */
+ if (newskb_offset)
+ skb_reserve(newskb, newskb_offset);
+
+ skb_put(newskb, init_wds ? skb->len + 6 : skb->len);
+ if (init_wds) {
+ memcpy(newskb->data + 6, skb->data, skb->len);
+ memcpy(newskb->data, wds_mac, 6);
+#ifdef ISLPCI_ETH_DEBUG
+ printk("islpci_eth_transmit:wds_mac\n");
+#endif
+ } else
+ memcpy(newskb->data, skb->data, skb->len);
+
+#if VERBOSE > SHOW_ERROR_MESSAGES
+ DEBUG(SHOW_TRACING, "memcpy %p %p %i wds %i\n",
+ newskb->data, skb->data, skb->len, init_wds);
+#endif
+
+ newskb->dev = skb->dev;
+ dev_kfree_skb(skb);
+ skb = newskb;
+ }
+ }
+ /* display the buffer contents for debugging */
+#if VERBOSE > SHOW_ERROR_MESSAGES
+ DEBUG(SHOW_BUFFER_CONTENTS, "\ntx %p ", skb->data);
+ display_buffer((char *) skb->data, skb->len);
+#endif
+
+ /* map the skb buffer to pci memory for DMA operation */
+ pci_map_address = pci_map_single(priv->pdev,
+ (void *) skb->data, skb->len,
+ PCI_DMA_TODEVICE);
+ if (unlikely(pci_map_address == 0)) {
+ printk(KERN_WARNING "%s: cannot map buffer to PCI\n",
+ ndev->name);
+
+ err = -EIO;
+ goto drop_free;
+ }
+ /* Place the fragment in the control block structure. */
+ index = curr_frag % ISL38XX_CB_TX_QSIZE;
+ fragment = &cb->tx_data_low[index];
+
+ priv->pci_map_tx_address[index] = pci_map_address;
+ /* store the skb address for future freeing */
+ priv->data_low_tx[index] = skb;
+ /* set the proper fragment start address and size information */
+ fragment->size = cpu_to_le16(frame_size);
+ fragment->flags = cpu_to_le16(0); /* set to 1 if more fragments */
+ fragment->address = cpu_to_le32(pci_map_address);
+ curr_frag++;
+
+ /* The fragment address in the control block must have been
+ * written before announcing the frame buffer to device. */
+ wmb();
+ cb->driver_curr_frag[ISL38XX_CB_TX_DATA_LQ] = cpu_to_le32(curr_frag);
+
+ if (curr_frag - priv->free_data_tx + ISL38XX_MIN_QTHRESHOLD
+ > ISL38XX_CB_TX_QSIZE) {
+ /* stop sends from upper layers */
+ netif_stop_queue(ndev);
+
+ /* set the full flag for the transmission queue */
+ priv->data_low_tx_full = 1;
+ }
+
+ /* trigger the device */
+ islpci_trigger(priv);
+
+ /* unlock the driver code */
+ spin_unlock_irqrestore(&priv->slock, flags);
+
+ /* set the transmission time */
+ ndev->trans_start = jiffies;
+ priv->statistics.tx_packets++;
+ priv->statistics.tx_bytes += skb->len;
+
+ return 0;
+
+ drop_free:
+ /* free the skbuf structure before aborting */
+ dev_kfree_skb(skb);
+ skb = NULL;
+
+ priv->statistics.tx_dropped++;
+ spin_unlock_irqrestore(&priv->slock, flags);
+ return err;
+}
+
+static inline int
+islpci_monitor_rx(islpci_private *priv, struct sk_buff **skb)
+{
+ /* The card reports full 802.11 packets but with a 20 bytes
+ * header and without the FCS. But there a is a bit that
+ * indicates if the packet is corrupted :-) */
+ struct rfmon_header *hdr = (struct rfmon_header *) (*skb)->data;
+ if (hdr->flags & 0x01)
+ /* This one is bad. Drop it ! */
+ return -1;
+ if (priv->ndev->type == ARPHRD_IEEE80211_PRISM) {
+ struct avs_80211_1_header *avs;
+ /* extract the relevant data from the header */
+ u32 clock = le32_to_cpu(hdr->clock);
+ u8 rate = hdr->rate;
+ u16 freq = le16_to_cpu(hdr->freq);
+ u8 rssi = hdr->rssi;
+
+ skb_pull(*skb, sizeof (struct rfmon_header));
+
+ if (skb_headroom(*skb) < sizeof (struct avs_80211_1_header)) {
+ struct sk_buff *newskb = skb_copy_expand(*skb,
+ sizeof (struct
+ avs_80211_1_header),
+ 0, GFP_ATOMIC);
+ if (newskb) {
+ dev_kfree_skb_irq(*skb);
+ *skb = newskb;
+ } else
+ return -1;
+ /* This behavior is not very subtile... */
+ }
+
+ /* make room for the new header and fill it. */
+ avs =
+ (struct avs_80211_1_header *) skb_push(*skb,
+ sizeof (struct
+ avs_80211_1_header));
+
+ avs->version = cpu_to_be32(P80211CAPTURE_VERSION);
+ avs->length = cpu_to_be32(sizeof (struct avs_80211_1_header));
+ avs->mactime = cpu_to_be64(le64_to_cpu(clock));
+ avs->hosttime = cpu_to_be64(jiffies);
+ avs->phytype = cpu_to_be32(6); /*OFDM: 6 for (g), 8 for (a) */
+ avs->channel = cpu_to_be32(channel_of_freq(freq));
+ avs->datarate = cpu_to_be32(rate * 5);
+ avs->antenna = cpu_to_be32(0); /*unknown */
+ avs->priority = cpu_to_be32(0); /*unknown */
+ avs->ssi_type = cpu_to_be32(3); /*2: dBm, 3: raw RSSI */
+ avs->ssi_signal = cpu_to_be32(rssi & 0x7f);
+ avs->ssi_noise = cpu_to_be32(priv->local_iwstatistics.qual.noise); /*better than 'undefined', I assume */
+ avs->preamble = cpu_to_be32(0); /*unknown */
+ avs->encoding = cpu_to_be32(0); /*unknown */
+ } else
+ skb_pull(*skb, sizeof (struct rfmon_header));
+
+ (*skb)->protocol = htons(ETH_P_802_2);
+ (*skb)->mac.raw = (*skb)->data;
+ (*skb)->pkt_type = PACKET_OTHERHOST;
+
+ return 0;
+}
+
+int
+islpci_eth_receive(islpci_private *priv)
+{
+ struct net_device *ndev = priv->ndev;
+ isl38xx_control_block *control_block = priv->control_block;
+ struct sk_buff *skb;
+ u16 size;
+ u32 index, offset;
+ unsigned char *src;
+ int discard = 0;
+
+#if VERBOSE > SHOW_ERROR_MESSAGES
+ DEBUG(SHOW_FUNCTION_CALLS, "islpci_eth_receive \n");
+#endif
+
+ /* the device has written an Ethernet frame in the data area
+ * of the sk_buff without updating the structure, do it now */
+ index = priv->free_data_rx % ISL38XX_CB_RX_QSIZE;
+ size = le16_to_cpu(control_block->rx_data_low[index].size);
+ skb = priv->data_low_rx[index];
+ offset = ((unsigned long)
+ le32_to_cpu(control_block->rx_data_low[index].address) -
+ (unsigned long) skb->data) & 3;
+
+#if VERBOSE > SHOW_ERROR_MESSAGES
+ DEBUG(SHOW_TRACING,
+ "frq->addr %x skb->data %p skb->len %u offset %u truesize %u\n ",
+ control_block->rx_data_low[priv->free_data_rx].address, skb->data,
+ skb->len, offset, skb->truesize);
+#endif
+
+ /* delete the streaming DMA mapping before processing the skb */
+ pci_unmap_single(priv->pdev,
+ priv->pci_map_rx_address[index],
+ MAX_FRAGMENT_SIZE_RX + 2, PCI_DMA_FROMDEVICE);
+
+ /* update the skb structure and allign the buffer */
+ skb_put(skb, size);
+ if (offset) {
+ /* shift the buffer allocation offset bytes to get the right frame */
+ skb_pull(skb, 2);
+ skb_put(skb, 2);
+ }
+#if VERBOSE > SHOW_ERROR_MESSAGES
+ /* display the buffer contents for debugging */
+ DEBUG(SHOW_BUFFER_CONTENTS, "\nrx %p ", skb->data);
+ display_buffer((char *) skb->data, skb->len);
+#endif
+
+ /* check whether WDS is enabled and whether the data frame is a WDS frame */
+
+ if (init_wds) {
+ /* WDS enabled, check for the wds address on the first 6 bytes of the buffer */
+ src = skb->data + 6;
+ memmove(skb->data, src, skb->len - 6);
+ skb_trim(skb, skb->len - 6);
+ }
+#if VERBOSE > SHOW_ERROR_MESSAGES
+ DEBUG(SHOW_TRACING, "Fragment size %i in skb at %p\n", size, skb);
+ DEBUG(SHOW_TRACING, "Skb data at %p, length %i\n", skb->data, skb->len);
+
+ /* display the buffer contents for debugging */
+ DEBUG(SHOW_BUFFER_CONTENTS, "\nrx %p ", skb->data);
+ display_buffer((char *) skb->data, skb->len);
+#endif
+
+ /* do some additional sk_buff and network layer parameters */
+ skb->dev = ndev;
+
+ /* take care of monitor mode and spy monitoring. */
+ if (unlikely(priv->iw_mode == IW_MODE_MONITOR))
+ discard = islpci_monitor_rx(priv, &skb);
+ else {
+ if (unlikely(skb->data[2 * ETH_ALEN] == 0)) {
+ /* The packet has a rx_annex. Read it for spy monitoring, Then
+ * remove it, while keeping the 2 leading MAC addr.
+ */
+ struct iw_quality wstats;
+ struct rx_annex_header *annex =
+ (struct rx_annex_header *) skb->data;
+ wstats.level = annex->rfmon.rssi;
+ /* The noise value can be a bit outdated if nobody's
+ * reading wireless stats... */
+ wstats.noise = priv->local_iwstatistics.qual.noise;
+ wstats.qual = wstats.level - wstats.noise;
+ wstats.updated = 0x07;
+ /* Update spy records */
+ wireless_spy_update(ndev, annex->addr2, &wstats);
+
+ memcpy(skb->data + sizeof (struct rfmon_header),
+ skb->data, 2 * ETH_ALEN);
+ skb_pull(skb, sizeof (struct rfmon_header));
+ }
+ skb->protocol = eth_type_trans(skb, ndev);
+ }
+ skb->ip_summed = CHECKSUM_NONE;
+ priv->statistics.rx_packets++;
+ priv->statistics.rx_bytes += size;
+
+ /* deliver the skb to the network layer */
+#ifdef ISLPCI_ETH_DEBUG
+ printk
+ ("islpci_eth_receive:netif_rx %2.2X %2.2X %2.2X %2.2X %2.2X %2.2X\n",
+ skb->data[0], skb->data[1], skb->data[2], skb->data[3],
+ skb->data[4], skb->data[5]);
+#endif
+ if (unlikely(discard)) {
+ dev_kfree_skb_irq(skb);
+ skb = NULL;
+ } else
+ netif_rx(skb);
+
+ /* increment the read index for the rx data low queue */
+ priv->free_data_rx++;
+
+ /* add one or more sk_buff structures */
+ while (index =
+ le32_to_cpu(control_block->
+ driver_curr_frag[ISL38XX_CB_RX_DATA_LQ]),
+ index - priv->free_data_rx < ISL38XX_CB_RX_QSIZE) {
+ /* allocate an sk_buff for received data frames storage
+ * include any required allignment operations */
+ skb = dev_alloc_skb(MAX_FRAGMENT_SIZE_RX + 2);
+ if (unlikely(skb == NULL)) {
+ /* error allocating an sk_buff structure elements */
+ DEBUG(SHOW_ERROR_MESSAGES, "Error allocating skb \n");
+ break;
+ }
+ skb_reserve(skb, (4 - (long) skb->data) & 0x03);
+ /* store the new skb structure pointer */
+ index = index % ISL38XX_CB_RX_QSIZE;
+ priv->data_low_rx[index] = skb;
+
+#if VERBOSE > SHOW_ERROR_MESSAGES
+ DEBUG(SHOW_TRACING,
+ "new alloc skb %p skb->data %p skb->len %u index %u truesize %u\n ",
+ skb, skb->data, skb->len, index, skb->truesize);
+#endif
+
+ /* set the streaming DMA mapping for proper PCI bus operation */
+ priv->pci_map_rx_address[index] =
+ pci_map_single(priv->pdev, (void *) skb->data,
+ MAX_FRAGMENT_SIZE_RX + 2,
+ PCI_DMA_FROMDEVICE);
+ if (unlikely(priv->pci_map_rx_address[index] == (dma_addr_t) NULL)) {
+ /* error mapping the buffer to device accessable memory address */
+ DEBUG(SHOW_ERROR_MESSAGES,
+ "Error mapping DMA address\n");
+
+ /* free the skbuf structure before aborting */
+ dev_kfree_skb_irq((struct sk_buff *) skb);
+ skb = NULL;
+ break;
+ }
+ /* update the fragment address */
+ control_block->rx_data_low[index].address = cpu_to_le32((u32)
+ priv->
+ pci_map_rx_address
+ [index]);
+ wmb();
+
+ /* increment the driver read pointer */
+ add_le32p((u32 *) &control_block->
+ driver_curr_frag[ISL38XX_CB_RX_DATA_LQ], 1);
+ }
+
+ /* trigger the device */
+ islpci_trigger(priv);
+
+ return 0;
+}
+
+void
+islpci_do_reset_and_wake(void *data)
+{
+ islpci_private *priv = (islpci_private *) data;
+ islpci_reset(priv, 1);
+ netif_wake_queue(priv->ndev);
+ priv->reset_task_pending = 0;
+}
+
+void
+islpci_eth_tx_timeout(struct net_device *ndev)
+{
+ islpci_private *priv = netdev_priv(ndev);
+ struct net_device_stats *statistics = &priv->statistics;
+
+ /* increment the transmit error counter */
+ statistics->tx_errors++;
+
+ printk(KERN_WARNING "%s: tx_timeout", ndev->name);
+ if (!priv->reset_task_pending) {
+ priv->reset_task_pending = 1;
+ printk(", scheduling a reset");
+ netif_stop_queue(ndev);
+ schedule_work(&priv->reset_task);
+ }
+ printk("\n");
+}
diff --git a/drivers/net/wireless/prism54/islpci_eth.h b/drivers/net/wireless/prism54/islpci_eth.h
new file mode 100644
index 0000000..bc9d7a6
--- /dev/null
+++ b/drivers/net/wireless/prism54/islpci_eth.h
@@ -0,0 +1,73 @@
+/*
+ *
+ * Copyright (C) 2002 Intersil Americas Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef _ISLPCI_ETH_H
+#define _ISLPCI_ETH_H
+
+#include "isl_38xx.h"
+#include "islpci_dev.h"
+
+struct rfmon_header {
+ u16 unk0; /* = 0x0000 */
+ u16 length; /* = 0x1400 */
+ u32 clock; /* 1MHz clock */
+ u8 flags;
+ u8 unk1;
+ u8 rate;
+ u8 unk2;
+ u16 freq;
+ u16 unk3;
+ u8 rssi;
+ u8 padding[3];
+} __attribute__ ((packed));
+
+struct rx_annex_header {
+ u8 addr1[ETH_ALEN];
+ u8 addr2[ETH_ALEN];
+ struct rfmon_header rfmon;
+} __attribute__ ((packed));
+
+/* wlan-ng (and hopefully others) AVS header, version one. Fields in
+ * network byte order. */
+#define P80211CAPTURE_VERSION 0x80211001
+
+struct avs_80211_1_header {
+ uint32_t version;
+ uint32_t length;
+ uint64_t mactime;
+ uint64_t hosttime;
+ uint32_t phytype;
+ uint32_t channel;
+ uint32_t datarate;
+ uint32_t antenna;
+ uint32_t priority;
+ uint32_t ssi_type;
+ int32_t ssi_signal;
+ int32_t ssi_noise;
+ uint32_t preamble;
+ uint32_t encoding;
+};
+
+void islpci_eth_cleanup_transmit(islpci_private *, isl38xx_control_block *);
+int islpci_eth_transmit(struct sk_buff *, struct net_device *);
+int islpci_eth_receive(islpci_private *);
+void islpci_eth_tx_timeout(struct net_device *);
+void islpci_do_reset_and_wake(void *data);
+
+#endif /* _ISL_GEN_H */
diff --git a/drivers/net/wireless/prism54/islpci_hotplug.c b/drivers/net/wireless/prism54/islpci_hotplug.c
new file mode 100644
index 0000000..efd4d21
--- /dev/null
+++ b/drivers/net/wireless/prism54/islpci_hotplug.c
@@ -0,0 +1,339 @@
+/*
+ *
+ * Copyright (C) 2002 Intersil Americas Inc.
+ * Copyright (C) 2003 Herbert Valerio Riedel <hvr@gnu.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <linux/version.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/init.h> /* For __init, __exit */
+
+#include "prismcompat.h"
+#include "islpci_dev.h"
+#include "islpci_mgt.h" /* for pc_debug */
+#include "isl_oid.h"
+
+#define DRV_NAME "prism54"
+#define DRV_VERSION "1.2"
+
+MODULE_AUTHOR("[Intersil] R.Bastings and W.Termorshuizen, The prism54.org Development Team <prism54-devel@prism54.org>");
+MODULE_DESCRIPTION("The Prism54 802.11 Wireless LAN adapter");
+MODULE_LICENSE("GPL");
+
+static int init_pcitm = 0;
+module_param(init_pcitm, int, 0);
+
+/* In this order: vendor, device, subvendor, subdevice, class, class_mask,
+ * driver_data
+ * If you have an update for this please contact prism54-devel@prism54.org
+ * The latest list can be found at http://prism54.org/supported_cards.php */
+static const struct pci_device_id prism54_id_tbl[] = {
+ /* Intersil PRISM Duette/Prism GT Wireless LAN adapter */
+ {
+ 0x1260, 0x3890,
+ PCI_ANY_ID, PCI_ANY_ID,
+ 0, 0, 0
+ },
+
+ /* 3COM 3CRWE154G72 Wireless LAN adapter */
+ {
+ 0x10b7, 0x6001,
+ PCI_ANY_ID, PCI_ANY_ID,
+ 0, 0, 0
+ },
+
+ /* Intersil PRISM Indigo Wireless LAN adapter */
+ {
+ 0x1260, 0x3877,
+ PCI_ANY_ID, PCI_ANY_ID,
+ 0, 0, 0
+ },
+
+ /* Intersil PRISM Javelin/Xbow Wireless LAN adapter */
+ {
+ 0x1260, 0x3886,
+ PCI_ANY_ID, PCI_ANY_ID,
+ 0, 0, 0
+ },
+
+ /* End of list */
+ {0,0,0,0,0,0,0}
+};
+
+/* register the device with the Hotplug facilities of the kernel */
+MODULE_DEVICE_TABLE(pci, prism54_id_tbl);
+
+static int prism54_probe(struct pci_dev *, const struct pci_device_id *);
+static void prism54_remove(struct pci_dev *);
+static int prism54_suspend(struct pci_dev *, u32 state);
+static int prism54_resume(struct pci_dev *);
+
+static struct pci_driver prism54_driver = {
+ .name = DRV_NAME,
+ .id_table = prism54_id_tbl,
+ .probe = prism54_probe,
+ .remove = prism54_remove,
+ .suspend = prism54_suspend,
+ .resume = prism54_resume,
+ /* .enable_wake ; we don't support this yet */
+};
+
+/******************************************************************************
+ Module initialization functions
+******************************************************************************/
+
+int
+prism54_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+ struct net_device *ndev;
+ u8 latency_tmr;
+ u32 mem_addr;
+ islpci_private *priv;
+ int rvalue;
+
+ /* Enable the pci device */
+ if (pci_enable_device(pdev)) {
+ printk(KERN_ERR "%s: pci_enable_device() failed.\n", DRV_NAME);
+ return -ENODEV;
+ }
+
+ /* check whether the latency timer is set correctly */
+ pci_read_config_byte(pdev, PCI_LATENCY_TIMER, &latency_tmr);
+#if VERBOSE > SHOW_ERROR_MESSAGES
+ DEBUG(SHOW_TRACING, "latency timer: %x\n", latency_tmr);
+#endif
+ if (latency_tmr < PCIDEVICE_LATENCY_TIMER_MIN) {
+ /* set the latency timer */
+ pci_write_config_byte(pdev, PCI_LATENCY_TIMER,
+ PCIDEVICE_LATENCY_TIMER_VAL);
+ }
+
+ /* enable PCI DMA */
+ if (pci_set_dma_mask(pdev, 0xffffffff)) {
+ printk(KERN_ERR "%s: 32-bit PCI DMA not supported", DRV_NAME);
+ goto do_pci_disable_device;
+ }
+
+ /* 0x40 is the programmable timer to configure the response timeout (TRDY_TIMEOUT)
+ * 0x41 is the programmable timer to configure the retry timeout (RETRY_TIMEOUT)
+ * The RETRY_TIMEOUT is used to set the number of retries that the core, as a
+ * Master, will perform before abandoning a cycle. The default value for
+ * RETRY_TIMEOUT is 0x80, which far exceeds the PCI 2.1 requirement for new
+ * devices. A write of zero to the RETRY_TIMEOUT register disables this
+ * function to allow use with any non-compliant legacy devices that may
+ * execute more retries.
+ *
+ * Writing zero to both these two registers will disable both timeouts and
+ * *can* solve problems caused by devices that are slow to respond.
+ * Make this configurable - MSW
+ */
+ if ( init_pcitm >= 0 ) {
+ pci_write_config_byte(pdev, 0x40, (u8)init_pcitm);
+ pci_write_config_byte(pdev, 0x41, (u8)init_pcitm);
+ } else {
+ printk(KERN_INFO "PCI TRDY/RETRY unchanged\n");
+ }
+
+ /* request the pci device I/O regions */
+ rvalue = pci_request_regions(pdev, DRV_NAME);
+ if (rvalue) {
+ printk(KERN_ERR "%s: pci_request_regions failure (rc=%d)\n",
+ DRV_NAME, rvalue);
+ goto do_pci_disable_device;
+ }
+
+ /* check if the memory window is indeed set */
+ rvalue = pci_read_config_dword(pdev, PCI_BASE_ADDRESS_0, &mem_addr);
+ if (rvalue || !mem_addr) {
+ printk(KERN_ERR "%s: PCI device memory region not configured; fix your BIOS or CardBus bridge/drivers\n",
+ DRV_NAME);
+ goto do_pci_release_regions;
+ }
+
+ /* enable PCI bus-mastering */
+ DEBUG(SHOW_TRACING, "%s: pci_set_master(pdev)\n", DRV_NAME);
+ pci_set_master(pdev);
+
+ /* enable MWI */
+ pci_set_mwi(pdev);
+
+ /* setup the network device interface and its structure */
+ if (!(ndev = islpci_setup(pdev))) {
+ /* error configuring the driver as a network device */
+ printk(KERN_ERR "%s: could not configure network device\n",
+ DRV_NAME);
+ goto do_pci_release_regions;
+ }
+
+ priv = netdev_priv(ndev);
+ islpci_set_state(priv, PRV_STATE_PREBOOT); /* we are attempting to boot */
+
+ /* card is in unknown state yet, might have some interrupts pending */
+ isl38xx_disable_interrupts(priv->device_base);
+
+ /* request for the interrupt before uploading the firmware */
+ rvalue = request_irq(pdev->irq, &islpci_interrupt,
+ SA_SHIRQ, ndev->name, priv);
+
+ if (rvalue) {
+ /* error, could not hook the handler to the irq */
+ printk(KERN_ERR "%s: could not install IRQ handler\n",
+ ndev->name);
+ goto do_unregister_netdev;
+ }
+
+ /* firmware upload is triggered in islpci_open */
+
+ return 0;
+
+ do_unregister_netdev:
+ unregister_netdev(ndev);
+ islpci_free_memory(priv);
+ pci_set_drvdata(pdev, NULL);
+ free_netdev(ndev);
+ priv = NULL;
+ do_pci_release_regions:
+ pci_release_regions(pdev);
+ do_pci_disable_device:
+ pci_disable_device(pdev);
+ return -EIO;
+}
+
+/* set by cleanup_module */
+static volatile int __in_cleanup_module = 0;
+
+/* this one removes one(!!) instance only */
+void
+prism54_remove(struct pci_dev *pdev)
+{
+ struct net_device *ndev = pci_get_drvdata(pdev);
+ islpci_private *priv = ndev ? netdev_priv(ndev) : NULL;
+ BUG_ON(!priv);
+
+ if (!__in_cleanup_module) {
+ printk(KERN_DEBUG "%s: hot unplug detected\n", ndev->name);
+ islpci_set_state(priv, PRV_STATE_OFF);
+ }
+
+ printk(KERN_DEBUG "%s: removing device\n", ndev->name);
+
+ unregister_netdev(ndev);
+
+ /* free the interrupt request */
+
+ if (islpci_get_state(priv) != PRV_STATE_OFF) {
+ isl38xx_disable_interrupts(priv->device_base);
+ islpci_set_state(priv, PRV_STATE_OFF);
+ /* This bellow causes a lockup at rmmod time. It might be
+ * because some interrupts still linger after rmmod time,
+ * see bug #17 */
+ /* pci_set_power_state(pdev, 3);*/ /* try to power-off */
+ }
+
+ free_irq(pdev->irq, priv);
+
+ /* free the PCI memory and unmap the remapped page */
+ islpci_free_memory(priv);
+
+ pci_set_drvdata(pdev, NULL);
+ free_netdev(ndev);
+ priv = NULL;
+
+ pci_release_regions(pdev);
+
+ pci_disable_device(pdev);
+}
+
+int
+prism54_suspend(struct pci_dev *pdev, u32 state)
+{
+ struct net_device *ndev = pci_get_drvdata(pdev);
+ islpci_private *priv = ndev ? netdev_priv(ndev) : NULL;
+ BUG_ON(!priv);
+
+ printk(KERN_NOTICE "%s: got suspend request (state %d)\n",
+ ndev->name, state);
+
+ pci_save_state(pdev);
+
+ /* tell the device not to trigger interrupts for now... */
+ isl38xx_disable_interrupts(priv->device_base);
+
+ /* from now on assume the hardware was already powered down
+ and don't touch it anymore */
+ islpci_set_state(priv, PRV_STATE_OFF);
+
+ netif_stop_queue(ndev);
+ netif_device_detach(ndev);
+
+ return 0;
+}
+
+int
+prism54_resume(struct pci_dev *pdev)
+{
+ struct net_device *ndev = pci_get_drvdata(pdev);
+ islpci_private *priv = ndev ? netdev_priv(ndev) : NULL;
+ BUG_ON(!priv);
+
+ pci_enable_device(pdev);
+
+ printk(KERN_NOTICE "%s: got resume request\n", ndev->name);
+
+ pci_restore_state(pdev);
+
+ /* alright let's go into the PREBOOT state */
+ islpci_reset(priv, 1);
+
+ netif_device_attach(ndev);
+ netif_start_queue(ndev);
+
+ return 0;
+}
+
+static int __init
+prism54_module_init(void)
+{
+ printk(KERN_INFO "Loaded %s driver, version %s\n",
+ DRV_NAME, DRV_VERSION);
+
+ __bug_on_wrong_struct_sizes ();
+
+ return pci_module_init(&prism54_driver);
+}
+
+/* by the time prism54_module_exit() terminates, as a postcondition
+ * all instances will have been destroyed by calls to
+ * prism54_remove() */
+static void __exit
+prism54_module_exit(void)
+{
+ __in_cleanup_module = 1;
+
+ pci_unregister_driver(&prism54_driver);
+
+ printk(KERN_INFO "Unloaded %s driver\n", DRV_NAME);
+
+ __in_cleanup_module = 0;
+}
+
+/* register entry points */
+module_init(prism54_module_init);
+module_exit(prism54_module_exit);
+/* EOF */
diff --git a/drivers/net/wireless/prism54/islpci_mgt.c b/drivers/net/wireless/prism54/islpci_mgt.c
new file mode 100644
index 0000000..b6f2e5a
--- /dev/null
+++ b/drivers/net/wireless/prism54/islpci_mgt.c
@@ -0,0 +1,513 @@
+/*
+ *
+ * Copyright (C) 2002 Intersil Americas Inc.
+ * Copyright 2004 Jens Maurer <Jens.Maurer@gmx.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/netdevice.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+
+#include <asm/io.h>
+#include <asm/system.h>
+#include <linux/if_arp.h>
+
+#include "prismcompat.h"
+#include "isl_38xx.h"
+#include "islpci_mgt.h"
+#include "isl_oid.h" /* additional types and defs for isl38xx fw */
+#include "isl_ioctl.h"
+
+#include <net/iw_handler.h>
+
+/******************************************************************************
+ Global variable definition section
+******************************************************************************/
+int pc_debug = VERBOSE;
+module_param(pc_debug, int, 0);
+
+/******************************************************************************
+ Driver general functions
+******************************************************************************/
+#if VERBOSE > SHOW_ERROR_MESSAGES
+void
+display_buffer(char *buffer, int length)
+{
+ if ((pc_debug & SHOW_BUFFER_CONTENTS) == 0)
+ return;
+
+ while (length > 0) {
+ printk("[%02x]", *buffer & 255);
+ length--;
+ buffer++;
+ }
+
+ printk("\n");
+}
+#endif
+
+/*****************************************************************************
+ Queue handling for management frames
+******************************************************************************/
+
+/*
+ * Helper function to create a PIMFOR management frame header.
+ */
+static void
+pimfor_encode_header(int operation, u32 oid, u32 length, pimfor_header_t *h)
+{
+ h->version = PIMFOR_VERSION;
+ h->operation = operation;
+ h->device_id = PIMFOR_DEV_ID_MHLI_MIB;
+ h->flags = 0;
+ h->oid = cpu_to_be32(oid);
+ h->length = cpu_to_be32(length);
+}
+
+/*
+ * Helper function to analyze a PIMFOR management frame header.
+ */
+static pimfor_header_t *
+pimfor_decode_header(void *data, int len)
+{
+ pimfor_header_t *h = data;
+
+ while ((void *) h < data + len) {
+ if (h->flags & PIMFOR_FLAG_LITTLE_ENDIAN) {
+ le32_to_cpus(&h->oid);
+ le32_to_cpus(&h->length);
+ } else {
+ be32_to_cpus(&h->oid);
+ be32_to_cpus(&h->length);
+ }
+ if (h->oid != OID_INL_TUNNEL)
+ return h;
+ h++;
+ }
+ return NULL;
+}
+
+/*
+ * Fill the receive queue for management frames with fresh buffers.
+ */
+int
+islpci_mgmt_rx_fill(struct net_device *ndev)
+{
+ islpci_private *priv = netdev_priv(ndev);
+ isl38xx_control_block *cb = /* volatile not needed */
+ (isl38xx_control_block *) priv->control_block;
+ u32 curr = le32_to_cpu(cb->driver_curr_frag[ISL38XX_CB_RX_MGMTQ]);
+
+#if VERBOSE > SHOW_ERROR_MESSAGES
+ DEBUG(SHOW_FUNCTION_CALLS, "islpci_mgmt_rx_fill \n");
+#endif
+
+ while (curr - priv->index_mgmt_rx < ISL38XX_CB_MGMT_QSIZE) {
+ u32 index = curr % ISL38XX_CB_MGMT_QSIZE;
+ struct islpci_membuf *buf = &priv->mgmt_rx[index];
+ isl38xx_fragment *frag = &cb->rx_data_mgmt[index];
+
+ if (buf->mem == NULL) {
+ buf->mem = kmalloc(MGMT_FRAME_SIZE, GFP_ATOMIC);
+ if (!buf->mem) {
+ printk(KERN_WARNING
+ "Error allocating management frame.\n");
+ return -ENOMEM;
+ }
+ buf->size = MGMT_FRAME_SIZE;
+ }
+ if (buf->pci_addr == 0) {
+ buf->pci_addr = pci_map_single(priv->pdev, buf->mem,
+ MGMT_FRAME_SIZE,
+ PCI_DMA_FROMDEVICE);
+ if (!buf->pci_addr) {
+ printk(KERN_WARNING
+ "Failed to make memory DMA'able\n.");
+ return -ENOMEM;
+ }
+ }
+
+ /* be safe: always reset control block information */
+ frag->size = cpu_to_le16(MGMT_FRAME_SIZE);
+ frag->flags = 0;
+ frag->address = cpu_to_le32(buf->pci_addr);
+ curr++;
+
+ /* The fragment address in the control block must have
+ * been written before announcing the frame buffer to
+ * device */
+ wmb();
+ cb->driver_curr_frag[ISL38XX_CB_RX_MGMTQ] = cpu_to_le32(curr);
+ }
+ return 0;
+}
+
+/*
+ * Create and transmit a management frame using "operation" and "oid",
+ * with arguments data/length.
+ * We either return an error and free the frame, or we return 0 and
+ * islpci_mgt_cleanup_transmit() frees the frame in the tx-done
+ * interrupt.
+ */
+static int
+islpci_mgt_transmit(struct net_device *ndev, int operation, unsigned long oid,
+ void *data, int length)
+{
+ islpci_private *priv = netdev_priv(ndev);
+ isl38xx_control_block *cb =
+ (isl38xx_control_block *) priv->control_block;
+ void *p;
+ int err = -EINVAL;
+ unsigned long flags;
+ isl38xx_fragment *frag;
+ struct islpci_membuf buf;
+ u32 curr_frag;
+ int index;
+ int frag_len = length + PIMFOR_HEADER_SIZE;
+
+#if VERBOSE > SHOW_ERROR_MESSAGES
+ DEBUG(SHOW_FUNCTION_CALLS, "islpci_mgt_transmit\n");
+#endif
+
+ if (frag_len > MGMT_FRAME_SIZE) {
+ printk(KERN_DEBUG "%s: mgmt frame too large %d\n",
+ ndev->name, frag_len);
+ goto error;
+ }
+
+ err = -ENOMEM;
+ p = buf.mem = kmalloc(frag_len, GFP_KERNEL);
+ if (!buf.mem) {
+ printk(KERN_DEBUG "%s: cannot allocate mgmt frame\n",
+ ndev->name);
+ goto error;
+ }
+ buf.size = frag_len;
+
+ /* create the header directly in the fragment data area */
+ pimfor_encode_header(operation, oid, length, (pimfor_header_t *) p);
+ p += PIMFOR_HEADER_SIZE;
+
+ if (data)
+ memcpy(p, data, length);
+ else
+ memset(p, 0, length);
+
+#if VERBOSE > SHOW_ERROR_MESSAGES
+ {
+ pimfor_header_t *h = buf.mem;
+ DEBUG(SHOW_PIMFOR_FRAMES,
+ "PIMFOR: op %i, oid 0x%08lx, device %i, flags 0x%x length 0x%x \n",
+ h->operation, oid, h->device_id, h->flags, length);
+
+ /* display the buffer contents for debugging */
+ display_buffer((char *) h, sizeof (pimfor_header_t));
+ display_buffer(p, length);
+ }
+#endif
+
+ err = -ENOMEM;
+ buf.pci_addr = pci_map_single(priv->pdev, buf.mem, frag_len,
+ PCI_DMA_TODEVICE);
+ if (!buf.pci_addr) {
+ printk(KERN_WARNING "%s: cannot map PCI memory for mgmt\n",
+ ndev->name);
+ goto error_free;
+ }
+
+ /* Protect the control block modifications against interrupts. */
+ spin_lock_irqsave(&priv->slock, flags);
+ curr_frag = le32_to_cpu(cb->driver_curr_frag[ISL38XX_CB_TX_MGMTQ]);
+ if (curr_frag - priv->index_mgmt_tx >= ISL38XX_CB_MGMT_QSIZE) {
+ printk(KERN_WARNING "%s: mgmt tx queue is still full\n",
+ ndev->name);
+ goto error_unlock;
+ }
+
+ /* commit the frame to the tx device queue */
+ index = curr_frag % ISL38XX_CB_MGMT_QSIZE;
+ priv->mgmt_tx[index] = buf;
+ frag = &cb->tx_data_mgmt[index];
+ frag->size = cpu_to_le16(frag_len);
+ frag->flags = 0; /* for any other than the last fragment, set to 1 */
+ frag->address = cpu_to_le32(buf.pci_addr);
+
+ /* The fragment address in the control block must have
+ * been written before announcing the frame buffer to
+ * device */
+ wmb();
+ cb->driver_curr_frag[ISL38XX_CB_TX_MGMTQ] = cpu_to_le32(curr_frag + 1);
+ spin_unlock_irqrestore(&priv->slock, flags);
+
+ /* trigger the device */
+ islpci_trigger(priv);
+ return 0;
+
+ error_unlock:
+ spin_unlock_irqrestore(&priv->slock, flags);
+ error_free:
+ kfree(buf.mem);
+ error:
+ return err;
+}
+
+/*
+ * Receive a management frame from the device.
+ * This can be an arbitrary number of traps, and at most one response
+ * frame for a previous request sent via islpci_mgt_transmit().
+ */
+int
+islpci_mgt_receive(struct net_device *ndev)
+{
+ islpci_private *priv = netdev_priv(ndev);
+ isl38xx_control_block *cb =
+ (isl38xx_control_block *) priv->control_block;
+ u32 curr_frag;
+
+#if VERBOSE > SHOW_ERROR_MESSAGES
+ DEBUG(SHOW_FUNCTION_CALLS, "islpci_mgt_receive \n");
+#endif
+
+ /* Only once per interrupt, determine fragment range to
+ * process. This avoids an endless loop (i.e. lockup) if
+ * frames come in faster than we can process them. */
+ curr_frag = le32_to_cpu(cb->device_curr_frag[ISL38XX_CB_RX_MGMTQ]);
+ barrier();
+
+ for (; priv->index_mgmt_rx < curr_frag; priv->index_mgmt_rx++) {
+ pimfor_header_t *header;
+ u32 index = priv->index_mgmt_rx % ISL38XX_CB_MGMT_QSIZE;
+ struct islpci_membuf *buf = &priv->mgmt_rx[index];
+ u16 frag_len;
+ int size;
+ struct islpci_mgmtframe *frame;
+
+ /* I have no idea (and no documentation) if flags != 0
+ * is possible. Drop the frame, reuse the buffer. */
+ if (le16_to_cpu(cb->rx_data_mgmt[index].flags) != 0) {
+ printk(KERN_WARNING "%s: unknown flags 0x%04x\n",
+ ndev->name,
+ le16_to_cpu(cb->rx_data_mgmt[index].flags));
+ continue;
+ }
+
+ /* The device only returns the size of the header(s) here. */
+ frag_len = le16_to_cpu(cb->rx_data_mgmt[index].size);
+
+ /*
+ * We appear to have no way to tell the device the
+ * size of a receive buffer. Thus, if this check
+ * triggers, we likely have kernel heap corruption. */
+ if (frag_len > MGMT_FRAME_SIZE) {
+ printk(KERN_WARNING
+ "%s: Bogus packet size of %d (%#x).\n",
+ ndev->name, frag_len, frag_len);
+ frag_len = MGMT_FRAME_SIZE;
+ }
+
+ /* Ensure the results of device DMA are visible to the CPU. */
+ pci_dma_sync_single_for_cpu(priv->pdev, buf->pci_addr,
+ buf->size, PCI_DMA_FROMDEVICE);
+
+ /* Perform endianess conversion for PIMFOR header in-place. */
+ header = pimfor_decode_header(buf->mem, frag_len);
+ if (!header) {
+ printk(KERN_WARNING "%s: no PIMFOR header found\n",
+ ndev->name);
+ continue;
+ }
+
+ /* The device ID from the PIMFOR packet received from
+ * the MVC is always 0. We forward a sensible device_id.
+ * Not that anyone upstream would care... */
+ header->device_id = priv->ndev->ifindex;
+
+#if VERBOSE > SHOW_ERROR_MESSAGES
+ DEBUG(SHOW_PIMFOR_FRAMES,
+ "PIMFOR: op %i, oid 0x%08x, device %i, flags 0x%x length 0x%x \n",
+ header->operation, header->oid, header->device_id,
+ header->flags, header->length);
+
+ /* display the buffer contents for debugging */
+ display_buffer((char *) header, PIMFOR_HEADER_SIZE);
+ display_buffer((char *) header + PIMFOR_HEADER_SIZE,
+ header->length);
+#endif
+
+ /* nobody sends these */
+ if (header->flags & PIMFOR_FLAG_APPLIC_ORIGIN) {
+ printk(KERN_DEBUG
+ "%s: errant PIMFOR application frame\n",
+ ndev->name);
+ continue;
+ }
+
+ /* Determine frame size, skipping OID_INL_TUNNEL headers. */
+ size = PIMFOR_HEADER_SIZE + header->length;
+ frame = kmalloc(sizeof (struct islpci_mgmtframe) + size,
+ GFP_ATOMIC);
+ if (!frame) {
+ printk(KERN_WARNING
+ "%s: Out of memory, cannot handle oid 0x%08x\n",
+ ndev->name, header->oid);
+ continue;
+ }
+ frame->ndev = ndev;
+ memcpy(&frame->buf, header, size);
+ frame->header = (pimfor_header_t *) frame->buf;
+ frame->data = frame->buf + PIMFOR_HEADER_SIZE;
+
+#if VERBOSE > SHOW_ERROR_MESSAGES
+ DEBUG(SHOW_PIMFOR_FRAMES,
+ "frame: header: %p, data: %p, size: %d\n",
+ frame->header, frame->data, size);
+#endif
+
+ if (header->operation == PIMFOR_OP_TRAP) {
+#if VERBOSE > SHOW_ERROR_MESSAGES
+ printk(KERN_DEBUG
+ "TRAP: oid 0x%x, device %i, flags 0x%x length %i\n",
+ header->oid, header->device_id, header->flags,
+ header->length);
+#endif
+
+ /* Create work to handle trap out of interrupt
+ * context. */
+ INIT_WORK(&frame->ws, prism54_process_trap, frame);
+ schedule_work(&frame->ws);
+
+ } else {
+ /* Signal the one waiting process that a response
+ * has been received. */
+ if ((frame = xchg(&priv->mgmt_received, frame)) != NULL) {
+ printk(KERN_WARNING
+ "%s: mgmt response not collected\n",
+ ndev->name);
+ kfree(frame);
+ }
+#if VERBOSE > SHOW_ERROR_MESSAGES
+ DEBUG(SHOW_TRACING, "Wake up Mgmt Queue\n");
+#endif
+ wake_up(&priv->mgmt_wqueue);
+ }
+
+ }
+
+ return 0;
+}
+
+/*
+ * Cleanup the transmit queue by freeing all frames handled by the device.
+ */
+void
+islpci_mgt_cleanup_transmit(struct net_device *ndev)
+{
+ islpci_private *priv = netdev_priv(ndev);
+ isl38xx_control_block *cb = /* volatile not needed */
+ (isl38xx_control_block *) priv->control_block;
+ u32 curr_frag;
+
+#if VERBOSE > SHOW_ERROR_MESSAGES
+ DEBUG(SHOW_FUNCTION_CALLS, "islpci_mgt_cleanup_transmit\n");
+#endif
+
+ /* Only once per cleanup, determine fragment range to
+ * process. This avoids an endless loop (i.e. lockup) if
+ * the device became confused, incrementing device_curr_frag
+ * rapidly. */
+ curr_frag = le32_to_cpu(cb->device_curr_frag[ISL38XX_CB_TX_MGMTQ]);
+ barrier();
+
+ for (; priv->index_mgmt_tx < curr_frag; priv->index_mgmt_tx++) {
+ int index = priv->index_mgmt_tx % ISL38XX_CB_MGMT_QSIZE;
+ struct islpci_membuf *buf = &priv->mgmt_tx[index];
+ pci_unmap_single(priv->pdev, buf->pci_addr, buf->size,
+ PCI_DMA_TODEVICE);
+ buf->pci_addr = 0;
+ kfree(buf->mem);
+ buf->mem = NULL;
+ buf->size = 0;
+ }
+}
+
+/*
+ * Perform one request-response transaction to the device.
+ */
+int
+islpci_mgt_transaction(struct net_device *ndev,
+ int operation, unsigned long oid,
+ void *senddata, int sendlen,
+ struct islpci_mgmtframe **recvframe)
+{
+ islpci_private *priv = netdev_priv(ndev);
+ const long wait_cycle_jiffies = (ISL38XX_WAIT_CYCLE * 10 * HZ) / 1000;
+ long timeout_left = ISL38XX_MAX_WAIT_CYCLES * wait_cycle_jiffies;
+ int err;
+ DEFINE_WAIT(wait);
+
+ *recvframe = NULL;
+
+ if (down_interruptible(&priv->mgmt_sem))
+ return -ERESTARTSYS;
+
+ prepare_to_wait(&priv->mgmt_wqueue, &wait, TASK_UNINTERRUPTIBLE);
+ err = islpci_mgt_transmit(ndev, operation, oid, senddata, sendlen);
+ if (err)
+ goto out;
+
+ err = -ETIMEDOUT;
+ while (timeout_left > 0) {
+ int timeleft;
+ struct islpci_mgmtframe *frame;
+
+ set_current_state(TASK_UNINTERRUPTIBLE);
+ timeleft = schedule_timeout(wait_cycle_jiffies);
+ frame = xchg(&priv->mgmt_received, NULL);
+ if (frame) {
+ if (frame->header->oid == oid) {
+ *recvframe = frame;
+ err = 0;
+ goto out;
+ } else {
+ printk(KERN_DEBUG
+ "%s: expecting oid 0x%x, received 0x%x.\n",
+ ndev->name, (unsigned int) oid,
+ frame->header->oid);
+ kfree(frame);
+ frame = NULL;
+ }
+ }
+ if (timeleft == 0) {
+ printk(KERN_DEBUG
+ "%s: timeout waiting for mgmt response %lu, "
+ "triggering device\n",
+ ndev->name, timeout_left);
+ islpci_trigger(priv);
+ }
+ timeout_left += timeleft - wait_cycle_jiffies;
+ }
+ printk(KERN_WARNING "%s: timeout waiting for mgmt response\n",
+ ndev->name);
+
+ /* TODO: we should reset the device here */
+ out:
+ finish_wait(&priv->mgmt_wqueue, &wait);
+ up(&priv->mgmt_sem);
+ return err;
+}
+
diff --git a/drivers/net/wireless/prism54/islpci_mgt.h b/drivers/net/wireless/prism54/islpci_mgt.h
new file mode 100644
index 0000000..2982be3
--- /dev/null
+++ b/drivers/net/wireless/prism54/islpci_mgt.h
@@ -0,0 +1,145 @@
+/*
+ *
+ * Copyright (C) 2002 Intersil Americas Inc.
+ * Copyright (C) 2003 Luis R. Rodriguez <mcgrof@ruslug.rutgers.edu>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef _ISLPCI_MGT_H
+#define _ISLPCI_MGT_H
+
+#include <linux/wireless.h>
+#include <linux/skbuff.h>
+
+/*
+ * Function definitions
+ */
+
+#define K_DEBUG(f, m, args...) do { if(f & m) printk(KERN_DEBUG args); } while(0)
+#define DEBUG(f, args...) K_DEBUG(f, pc_debug, args)
+
+extern int pc_debug;
+#define init_wds 0 /* help compiler optimize away dead code */
+
+
+/* General driver definitions */
+#define PCIDEVICE_LATENCY_TIMER_MIN 0x40
+#define PCIDEVICE_LATENCY_TIMER_VAL 0x50
+
+/* Debugging verbose definitions */
+#define SHOW_NOTHING 0x00 /* overrules everything */
+#define SHOW_ANYTHING 0xFF
+#define SHOW_ERROR_MESSAGES 0x01
+#define SHOW_TRAPS 0x02
+#define SHOW_FUNCTION_CALLS 0x04
+#define SHOW_TRACING 0x08
+#define SHOW_QUEUE_INDEXES 0x10
+#define SHOW_PIMFOR_FRAMES 0x20
+#define SHOW_BUFFER_CONTENTS 0x40
+#define VERBOSE 0x01
+
+/* Default card definitions */
+#define CARD_DEFAULT_CHANNEL 6
+#define CARD_DEFAULT_MODE INL_MODE_CLIENT
+#define CARD_DEFAULT_IW_MODE IW_MODE_INFRA
+#define CARD_DEFAULT_BSSTYPE DOT11_BSSTYPE_INFRA
+#define CARD_DEFAULT_CLIENT_SSID ""
+#define CARD_DEFAULT_AP_SSID "default"
+#define CARD_DEFAULT_KEY1 "default_key_1"
+#define CARD_DEFAULT_KEY2 "default_key_2"
+#define CARD_DEFAULT_KEY3 "default_key_3"
+#define CARD_DEFAULT_KEY4 "default_key_4"
+#define CARD_DEFAULT_WEP 0
+#define CARD_DEFAULT_FILTER 0
+#define CARD_DEFAULT_WDS 0
+#define CARD_DEFAULT_AUTHEN DOT11_AUTH_OS
+#define CARD_DEFAULT_DOT1X 0
+#define CARD_DEFAULT_MLME_MODE DOT11_MLME_AUTO
+#define CARD_DEFAULT_CONFORMANCE OID_INL_CONFORMANCE_NONE
+#define CARD_DEFAULT_PROFILE DOT11_PROFILE_MIXED_G_WIFI
+#define CARD_DEFAULT_MAXFRAMEBURST DOT11_MAXFRAMEBURST_MIXED_SAFE
+
+/* PIMFOR package definitions */
+#define PIMFOR_ETHERTYPE 0x8828
+#define PIMFOR_HEADER_SIZE 12
+#define PIMFOR_VERSION 1
+#define PIMFOR_OP_GET 0
+#define PIMFOR_OP_SET 1
+#define PIMFOR_OP_RESPONSE 2
+#define PIMFOR_OP_ERROR 3
+#define PIMFOR_OP_TRAP 4
+#define PIMFOR_OP_RESERVED 5 /* till 255 */
+#define PIMFOR_DEV_ID_MHLI_MIB 0
+#define PIMFOR_FLAG_APPLIC_ORIGIN 0x01
+#define PIMFOR_FLAG_LITTLE_ENDIAN 0x02
+
+static inline void
+add_le32p(u32 * le_number, u32 add)
+{
+ *le_number = cpu_to_le32(le32_to_cpup(le_number) + add);
+}
+
+void display_buffer(char *, int);
+
+/*
+ * Type definition section
+ *
+ * the structure defines only the header allowing copyless
+ * frame handling
+ */
+typedef struct {
+ u8 version;
+ u8 operation;
+ u32 oid;
+ u8 device_id;
+ u8 flags;
+ u32 length;
+} __attribute__ ((packed))
+pimfor_header_t;
+
+/* A received and interrupt-processed management frame, either for
+ * schedule_work(prism54_process_trap) or for priv->mgmt_received,
+ * processed by islpci_mgt_transaction(). */
+struct islpci_mgmtframe {
+ struct net_device *ndev; /* pointer to network device */
+ pimfor_header_t *header; /* payload header, points into buf */
+ void *data; /* payload ex header, points into buf */
+ struct work_struct ws; /* argument for schedule_work() */
+ char buf[0]; /* fragment buffer */
+};
+
+int
+islpci_mgt_receive(struct net_device *ndev);
+
+int
+islpci_mgmt_rx_fill(struct net_device *ndev);
+
+void
+islpci_mgt_cleanup_transmit(struct net_device *ndev);
+
+int
+islpci_mgt_transaction(struct net_device *ndev,
+ int operation, unsigned long oid,
+ void *senddata, int sendlen,
+ struct islpci_mgmtframe **recvframe);
+
+static inline void
+islpci_mgt_release(struct islpci_mgmtframe *frame)
+{
+ kfree(frame);
+}
+
+#endif /* _ISLPCI_MGT_H */
diff --git a/drivers/net/wireless/prism54/oid_mgt.c b/drivers/net/wireless/prism54/oid_mgt.c
new file mode 100644
index 0000000..12123e2
--- /dev/null
+++ b/drivers/net/wireless/prism54/oid_mgt.c
@@ -0,0 +1,907 @@
+/*
+ * Copyright (C) 2003,2004 Aurelien Alleaume <slts@free.fr>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include "prismcompat.h"
+#include "islpci_dev.h"
+#include "islpci_mgt.h"
+#include "isl_oid.h"
+#include "oid_mgt.h"
+#include "isl_ioctl.h"
+
+/* to convert between channel and freq */
+static const int frequency_list_bg[] = { 2412, 2417, 2422, 2427, 2432,
+ 2437, 2442, 2447, 2452, 2457, 2462, 2467, 2472, 2484
+};
+
+int
+channel_of_freq(int f)
+{
+ int c = 0;
+
+ if ((f >= 2412) && (f <= 2484)) {
+ while ((c < 14) && (f != frequency_list_bg[c]))
+ c++;
+ return (c >= 14) ? 0 : ++c;
+ } else if ((f >= (int) 5000) && (f <= (int) 6000)) {
+ return ( (f - 5000) / 5 );
+ } else
+ return 0;
+}
+
+#define OID_STRUCT(name,oid,s,t) [name] = {oid, 0, sizeof(s), t}
+#define OID_STRUCT_C(name,oid,s,t) OID_STRUCT(name,oid,s,t | OID_FLAG_CACHED)
+#define OID_U32(name,oid) OID_STRUCT(name,oid,u32,OID_TYPE_U32)
+#define OID_U32_C(name,oid) OID_STRUCT_C(name,oid,u32,OID_TYPE_U32)
+#define OID_STRUCT_MLME(name,oid) OID_STRUCT(name,oid,struct obj_mlme,OID_TYPE_MLME)
+#define OID_STRUCT_MLMEEX(name,oid) OID_STRUCT(name,oid,struct obj_mlmeex,OID_TYPE_MLMEEX)
+
+#define OID_UNKNOWN(name,oid) OID_STRUCT(name,oid,0,0)
+
+struct oid_t isl_oid[] = {
+ OID_STRUCT(GEN_OID_MACADDRESS, 0x00000000, u8[6], OID_TYPE_ADDR),
+ OID_U32(GEN_OID_LINKSTATE, 0x00000001),
+ OID_UNKNOWN(GEN_OID_WATCHDOG, 0x00000002),
+ OID_UNKNOWN(GEN_OID_MIBOP, 0x00000003),
+ OID_UNKNOWN(GEN_OID_OPTIONS, 0x00000004),
+ OID_UNKNOWN(GEN_OID_LEDCONFIG, 0x00000005),
+
+ /* 802.11 */
+ OID_U32_C(DOT11_OID_BSSTYPE, 0x10000000),
+ OID_STRUCT_C(DOT11_OID_BSSID, 0x10000001, u8[6], OID_TYPE_RAW),
+ OID_STRUCT_C(DOT11_OID_SSID, 0x10000002, struct obj_ssid,
+ OID_TYPE_SSID),
+ OID_U32(DOT11_OID_STATE, 0x10000003),
+ OID_U32(DOT11_OID_AID, 0x10000004),
+ OID_STRUCT(DOT11_OID_COUNTRYSTRING, 0x10000005, u8[4], OID_TYPE_RAW),
+ OID_STRUCT_C(DOT11_OID_SSIDOVERRIDE, 0x10000006, struct obj_ssid,
+ OID_TYPE_SSID),
+
+ OID_U32(DOT11_OID_MEDIUMLIMIT, 0x11000000),
+ OID_U32_C(DOT11_OID_BEACONPERIOD, 0x11000001),
+ OID_U32(DOT11_OID_DTIMPERIOD, 0x11000002),
+ OID_U32(DOT11_OID_ATIMWINDOW, 0x11000003),
+ OID_U32(DOT11_OID_LISTENINTERVAL, 0x11000004),
+ OID_U32(DOT11_OID_CFPPERIOD, 0x11000005),
+ OID_U32(DOT11_OID_CFPDURATION, 0x11000006),
+
+ OID_U32_C(DOT11_OID_AUTHENABLE, 0x12000000),
+ OID_U32_C(DOT11_OID_PRIVACYINVOKED, 0x12000001),
+ OID_U32_C(DOT11_OID_EXUNENCRYPTED, 0x12000002),
+ OID_U32_C(DOT11_OID_DEFKEYID, 0x12000003),
+ [DOT11_OID_DEFKEYX] = {0x12000004, 3, sizeof (struct obj_key),
+ OID_FLAG_CACHED | OID_TYPE_KEY}, /* DOT11_OID_DEFKEY1,...DOT11_OID_DEFKEY4 */
+ OID_UNKNOWN(DOT11_OID_STAKEY, 0x12000008),
+ OID_U32(DOT11_OID_REKEYTHRESHOLD, 0x12000009),
+ OID_UNKNOWN(DOT11_OID_STASC, 0x1200000a),
+
+ OID_U32(DOT11_OID_PRIVTXREJECTED, 0x1a000000),
+ OID_U32(DOT11_OID_PRIVRXPLAIN, 0x1a000001),
+ OID_U32(DOT11_OID_PRIVRXFAILED, 0x1a000002),
+ OID_U32(DOT11_OID_PRIVRXNOKEY, 0x1a000003),
+
+ OID_U32_C(DOT11_OID_RTSTHRESH, 0x13000000),
+ OID_U32_C(DOT11_OID_FRAGTHRESH, 0x13000001),
+ OID_U32_C(DOT11_OID_SHORTRETRIES, 0x13000002),
+ OID_U32_C(DOT11_OID_LONGRETRIES, 0x13000003),
+ OID_U32_C(DOT11_OID_MAXTXLIFETIME, 0x13000004),
+ OID_U32(DOT11_OID_MAXRXLIFETIME, 0x13000005),
+ OID_U32(DOT11_OID_AUTHRESPTIMEOUT, 0x13000006),
+ OID_U32(DOT11_OID_ASSOCRESPTIMEOUT, 0x13000007),
+
+ OID_UNKNOWN(DOT11_OID_ALOFT_TABLE, 0x1d000000),
+ OID_UNKNOWN(DOT11_OID_ALOFT_CTRL_TABLE, 0x1d000001),
+ OID_UNKNOWN(DOT11_OID_ALOFT_RETREAT, 0x1d000002),
+ OID_UNKNOWN(DOT11_OID_ALOFT_PROGRESS, 0x1d000003),
+ OID_U32(DOT11_OID_ALOFT_FIXEDRATE, 0x1d000004),
+ OID_UNKNOWN(DOT11_OID_ALOFT_RSSIGRAPH, 0x1d000005),
+ OID_UNKNOWN(DOT11_OID_ALOFT_CONFIG, 0x1d000006),
+
+ [DOT11_OID_VDCFX] = {0x1b000000, 7, 0, 0},
+ OID_U32(DOT11_OID_MAXFRAMEBURST, 0x1b000008),
+
+ OID_U32(DOT11_OID_PSM, 0x14000000),
+ OID_U32(DOT11_OID_CAMTIMEOUT, 0x14000001),
+ OID_U32(DOT11_OID_RECEIVEDTIMS, 0x14000002),
+ OID_U32(DOT11_OID_ROAMPREFERENCE, 0x14000003),
+
+ OID_U32(DOT11_OID_BRIDGELOCAL, 0x15000000),
+ OID_U32(DOT11_OID_CLIENTS, 0x15000001),
+ OID_U32(DOT11_OID_CLIENTSASSOCIATED, 0x15000002),
+ [DOT11_OID_CLIENTX] = {0x15000003, 2006, 0, 0}, /* DOT11_OID_CLIENTX,...DOT11_OID_CLIENT2007 */
+
+ OID_STRUCT(DOT11_OID_CLIENTFIND, 0x150007DB, u8[6], OID_TYPE_ADDR),
+ OID_STRUCT(DOT11_OID_WDSLINKADD, 0x150007DC, u8[6], OID_TYPE_ADDR),
+ OID_STRUCT(DOT11_OID_WDSLINKREMOVE, 0x150007DD, u8[6], OID_TYPE_ADDR),
+ OID_STRUCT(DOT11_OID_EAPAUTHSTA, 0x150007DE, u8[6], OID_TYPE_ADDR),
+ OID_STRUCT(DOT11_OID_EAPUNAUTHSTA, 0x150007DF, u8[6], OID_TYPE_ADDR),
+ OID_U32_C(DOT11_OID_DOT1XENABLE, 0x150007E0),
+ OID_UNKNOWN(DOT11_OID_MICFAILURE, 0x150007E1),
+ OID_UNKNOWN(DOT11_OID_REKEYINDICATE, 0x150007E2),
+
+ OID_U32(DOT11_OID_MPDUTXSUCCESSFUL, 0x16000000),
+ OID_U32(DOT11_OID_MPDUTXONERETRY, 0x16000001),
+ OID_U32(DOT11_OID_MPDUTXMULTIPLERETRIES, 0x16000002),
+ OID_U32(DOT11_OID_MPDUTXFAILED, 0x16000003),
+ OID_U32(DOT11_OID_MPDURXSUCCESSFUL, 0x16000004),
+ OID_U32(DOT11_OID_MPDURXDUPS, 0x16000005),
+ OID_U32(DOT11_OID_RTSSUCCESSFUL, 0x16000006),
+ OID_U32(DOT11_OID_RTSFAILED, 0x16000007),
+ OID_U32(DOT11_OID_ACKFAILED, 0x16000008),
+ OID_U32(DOT11_OID_FRAMERECEIVES, 0x16000009),
+ OID_U32(DOT11_OID_FRAMEERRORS, 0x1600000A),
+ OID_U32(DOT11_OID_FRAMEABORTS, 0x1600000B),
+ OID_U32(DOT11_OID_FRAMEABORTSPHY, 0x1600000C),
+
+ OID_U32(DOT11_OID_SLOTTIME, 0x17000000),
+ OID_U32(DOT11_OID_CWMIN, 0x17000001),
+ OID_U32(DOT11_OID_CWMAX, 0x17000002),
+ OID_U32(DOT11_OID_ACKWINDOW, 0x17000003),
+ OID_U32(DOT11_OID_ANTENNARX, 0x17000004),
+ OID_U32(DOT11_OID_ANTENNATX, 0x17000005),
+ OID_U32(DOT11_OID_ANTENNADIVERSITY, 0x17000006),
+ OID_U32_C(DOT11_OID_CHANNEL, 0x17000007),
+ OID_U32_C(DOT11_OID_EDTHRESHOLD, 0x17000008),
+ OID_U32(DOT11_OID_PREAMBLESETTINGS, 0x17000009),
+ OID_STRUCT(DOT11_OID_RATES, 0x1700000A, u8[IWMAX_BITRATES + 1],
+ OID_TYPE_RAW),
+ OID_U32(DOT11_OID_CCAMODESUPPORTED, 0x1700000B),
+ OID_U32(DOT11_OID_CCAMODE, 0x1700000C),
+ OID_UNKNOWN(DOT11_OID_RSSIVECTOR, 0x1700000D),
+ OID_UNKNOWN(DOT11_OID_OUTPUTPOWERTABLE, 0x1700000E),
+ OID_U32(DOT11_OID_OUTPUTPOWER, 0x1700000F),
+ OID_STRUCT(DOT11_OID_SUPPORTEDRATES, 0x17000010,
+ u8[IWMAX_BITRATES + 1], OID_TYPE_RAW),
+ OID_U32_C(DOT11_OID_FREQUENCY, 0x17000011),
+ [DOT11_OID_SUPPORTEDFREQUENCIES] =
+ {0x17000012, 0, sizeof (struct obj_frequencies)
+ + sizeof (u16) * IWMAX_FREQ, OID_TYPE_FREQUENCIES},
+
+ OID_U32(DOT11_OID_NOISEFLOOR, 0x17000013),
+ OID_STRUCT(DOT11_OID_FREQUENCYACTIVITY, 0x17000014, u8[IWMAX_FREQ + 1],
+ OID_TYPE_RAW),
+ OID_UNKNOWN(DOT11_OID_IQCALIBRATIONTABLE, 0x17000015),
+ OID_U32(DOT11_OID_NONERPPROTECTION, 0x17000016),
+ OID_U32(DOT11_OID_SLOTSETTINGS, 0x17000017),
+ OID_U32(DOT11_OID_NONERPTIMEOUT, 0x17000018),
+ OID_U32(DOT11_OID_PROFILES, 0x17000019),
+ OID_STRUCT(DOT11_OID_EXTENDEDRATES, 0x17000020,
+ u8[IWMAX_BITRATES + 1], OID_TYPE_RAW),
+
+ OID_STRUCT_MLME(DOT11_OID_DEAUTHENTICATE, 0x18000000),
+ OID_STRUCT_MLME(DOT11_OID_AUTHENTICATE, 0x18000001),
+ OID_STRUCT_MLME(DOT11_OID_DISASSOCIATE, 0x18000002),
+ OID_STRUCT_MLME(DOT11_OID_ASSOCIATE, 0x18000003),
+ OID_UNKNOWN(DOT11_OID_SCAN, 0x18000004),
+ OID_STRUCT_MLMEEX(DOT11_OID_BEACON, 0x18000005),
+ OID_STRUCT_MLMEEX(DOT11_OID_PROBE, 0x18000006),
+ OID_STRUCT_MLMEEX(DOT11_OID_DEAUTHENTICATEEX, 0x18000007),
+ OID_STRUCT_MLMEEX(DOT11_OID_AUTHENTICATEEX, 0x18000008),
+ OID_STRUCT_MLMEEX(DOT11_OID_DISASSOCIATEEX, 0x18000009),
+ OID_STRUCT_MLMEEX(DOT11_OID_ASSOCIATEEX, 0x1800000A),
+ OID_STRUCT_MLMEEX(DOT11_OID_REASSOCIATE, 0x1800000B),
+ OID_STRUCT_MLMEEX(DOT11_OID_REASSOCIATEEX, 0x1800000C),
+
+ OID_U32(DOT11_OID_NONERPSTATUS, 0x1E000000),
+
+ OID_U32(DOT11_OID_STATIMEOUT, 0x19000000),
+ OID_U32_C(DOT11_OID_MLMEAUTOLEVEL, 0x19000001),
+ OID_U32(DOT11_OID_BSSTIMEOUT, 0x19000002),
+ [DOT11_OID_ATTACHMENT] = {0x19000003, 0,
+ sizeof(struct obj_attachment), OID_TYPE_ATTACH},
+ OID_STRUCT_C(DOT11_OID_PSMBUFFER, 0x19000004, struct obj_buffer,
+ OID_TYPE_BUFFER),
+
+ OID_U32(DOT11_OID_BSSS, 0x1C000000),
+ [DOT11_OID_BSSX] = {0x1C000001, 63, sizeof (struct obj_bss),
+ OID_TYPE_BSS}, /*DOT11_OID_BSS1,...,DOT11_OID_BSS64 */
+ OID_STRUCT(DOT11_OID_BSSFIND, 0x1C000042, struct obj_bss, OID_TYPE_BSS),
+ [DOT11_OID_BSSLIST] = {0x1C000043, 0, sizeof (struct
+ obj_bsslist) +
+ sizeof (struct obj_bss[IWMAX_BSS]),
+ OID_TYPE_BSSLIST},
+
+ OID_UNKNOWN(OID_INL_TUNNEL, 0xFF020000),
+ OID_UNKNOWN(OID_INL_MEMADDR, 0xFF020001),
+ OID_UNKNOWN(OID_INL_MEMORY, 0xFF020002),
+ OID_U32_C(OID_INL_MODE, 0xFF020003),
+ OID_UNKNOWN(OID_INL_COMPONENT_NR, 0xFF020004),
+ OID_STRUCT(OID_INL_VERSION, 0xFF020005, u8[8], OID_TYPE_RAW),
+ OID_UNKNOWN(OID_INL_INTERFACE_ID, 0xFF020006),
+ OID_UNKNOWN(OID_INL_COMPONENT_ID, 0xFF020007),
+ OID_U32_C(OID_INL_CONFIG, 0xFF020008),
+ OID_U32_C(OID_INL_DOT11D_CONFORMANCE, 0xFF02000C),
+ OID_U32(OID_INL_PHYCAPABILITIES, 0xFF02000D),
+ OID_U32_C(OID_INL_OUTPUTPOWER, 0xFF02000F),
+
+};
+
+int
+mgt_init(islpci_private *priv)
+{
+ int i;
+
+ priv->mib = kmalloc(OID_NUM_LAST * sizeof (void *), GFP_KERNEL);
+ if (!priv->mib)
+ return -ENOMEM;
+
+ memset(priv->mib, 0, OID_NUM_LAST * sizeof (void *));
+
+ /* Alloc the cache */
+ for (i = 0; i < OID_NUM_LAST; i++) {
+ if (isl_oid[i].flags & OID_FLAG_CACHED) {
+ priv->mib[i] = kmalloc(isl_oid[i].size *
+ (isl_oid[i].range + 1),
+ GFP_KERNEL);
+ if (!priv->mib[i])
+ return -ENOMEM;
+ memset(priv->mib[i], 0,
+ isl_oid[i].size * (isl_oid[i].range + 1));
+ } else
+ priv->mib[i] = NULL;
+ }
+
+ init_rwsem(&priv->mib_sem);
+ prism54_mib_init(priv);
+
+ return 0;
+}
+
+void
+mgt_clean(islpci_private *priv)
+{
+ int i;
+
+ if (!priv->mib)
+ return;
+ for (i = 0; i < OID_NUM_LAST; i++)
+ if (priv->mib[i]) {
+ kfree(priv->mib[i]);
+ priv->mib[i] = NULL;
+ }
+ kfree(priv->mib);
+ priv->mib = NULL;
+}
+
+void
+mgt_le_to_cpu(int type, void *data)
+{
+ switch (type) {
+ case OID_TYPE_U32:
+ *(u32 *) data = le32_to_cpu(*(u32 *) data);
+ break;
+ case OID_TYPE_BUFFER:{
+ struct obj_buffer *buff = data;
+ buff->size = le32_to_cpu(buff->size);
+ buff->addr = le32_to_cpu(buff->addr);
+ break;
+ }
+ case OID_TYPE_BSS:{
+ struct obj_bss *bss = data;
+ bss->age = le16_to_cpu(bss->age);
+ bss->channel = le16_to_cpu(bss->channel);
+ bss->capinfo = le16_to_cpu(bss->capinfo);
+ bss->rates = le16_to_cpu(bss->rates);
+ bss->basic_rates = le16_to_cpu(bss->basic_rates);
+ break;
+ }
+ case OID_TYPE_BSSLIST:{
+ struct obj_bsslist *list = data;
+ int i;
+ list->nr = le32_to_cpu(list->nr);
+ for (i = 0; i < list->nr; i++)
+ mgt_le_to_cpu(OID_TYPE_BSS, &list->bsslist[i]);
+ break;
+ }
+ case OID_TYPE_FREQUENCIES:{
+ struct obj_frequencies *freq = data;
+ int i;
+ freq->nr = le16_to_cpu(freq->nr);
+ for (i = 0; i < freq->nr; i++)
+ freq->mhz[i] = le16_to_cpu(freq->mhz[i]);
+ break;
+ }
+ case OID_TYPE_MLME:{
+ struct obj_mlme *mlme = data;
+ mlme->id = le16_to_cpu(mlme->id);
+ mlme->state = le16_to_cpu(mlme->state);
+ mlme->code = le16_to_cpu(mlme->code);
+ break;
+ }
+ case OID_TYPE_MLMEEX:{
+ struct obj_mlmeex *mlme = data;
+ mlme->id = le16_to_cpu(mlme->id);
+ mlme->state = le16_to_cpu(mlme->state);
+ mlme->code = le16_to_cpu(mlme->code);
+ mlme->size = le16_to_cpu(mlme->size);
+ break;
+ }
+ case OID_TYPE_ATTACH:{
+ struct obj_attachment *attach = data;
+ attach->id = le16_to_cpu(attach->id);
+ attach->size = le16_to_cpu(attach->size);;
+ break;
+ }
+ case OID_TYPE_SSID:
+ case OID_TYPE_KEY:
+ case OID_TYPE_ADDR:
+ case OID_TYPE_RAW:
+ break;
+ default:
+ BUG();
+ }
+}
+
+static void
+mgt_cpu_to_le(int type, void *data)
+{
+ switch (type) {
+ case OID_TYPE_U32:
+ *(u32 *) data = cpu_to_le32(*(u32 *) data);
+ break;
+ case OID_TYPE_BUFFER:{
+ struct obj_buffer *buff = data;
+ buff->size = cpu_to_le32(buff->size);
+ buff->addr = cpu_to_le32(buff->addr);
+ break;
+ }
+ case OID_TYPE_BSS:{
+ struct obj_bss *bss = data;
+ bss->age = cpu_to_le16(bss->age);
+ bss->channel = cpu_to_le16(bss->channel);
+ bss->capinfo = cpu_to_le16(bss->capinfo);
+ bss->rates = cpu_to_le16(bss->rates);
+ bss->basic_rates = cpu_to_le16(bss->basic_rates);
+ break;
+ }
+ case OID_TYPE_BSSLIST:{
+ struct obj_bsslist *list = data;
+ int i;
+ list->nr = cpu_to_le32(list->nr);
+ for (i = 0; i < list->nr; i++)
+ mgt_cpu_to_le(OID_TYPE_BSS, &list->bsslist[i]);
+ break;
+ }
+ case OID_TYPE_FREQUENCIES:{
+ struct obj_frequencies *freq = data;
+ int i;
+ freq->nr = cpu_to_le16(freq->nr);
+ for (i = 0; i < freq->nr; i++)
+ freq->mhz[i] = cpu_to_le16(freq->mhz[i]);
+ break;
+ }
+ case OID_TYPE_MLME:{
+ struct obj_mlme *mlme = data;
+ mlme->id = cpu_to_le16(mlme->id);
+ mlme->state = cpu_to_le16(mlme->state);
+ mlme->code = cpu_to_le16(mlme->code);
+ break;
+ }
+ case OID_TYPE_MLMEEX:{
+ struct obj_mlmeex *mlme = data;
+ mlme->id = cpu_to_le16(mlme->id);
+ mlme->state = cpu_to_le16(mlme->state);
+ mlme->code = cpu_to_le16(mlme->code);
+ mlme->size = cpu_to_le16(mlme->size);
+ break;
+ }
+ case OID_TYPE_ATTACH:{
+ struct obj_attachment *attach = data;
+ attach->id = cpu_to_le16(attach->id);
+ attach->size = cpu_to_le16(attach->size);;
+ break;
+ }
+ case OID_TYPE_SSID:
+ case OID_TYPE_KEY:
+ case OID_TYPE_ADDR:
+ case OID_TYPE_RAW:
+ break;
+ default:
+ BUG();
+ }
+}
+
+/* Note : data is modified during this function */
+
+int
+mgt_set_request(islpci_private *priv, enum oid_num_t n, int extra, void *data)
+{
+ int ret = 0;
+ struct islpci_mgmtframe *response = NULL;
+ int response_op = PIMFOR_OP_ERROR;
+ int dlen;
+ void *cache, *_data = data;
+ u32 oid;
+
+ BUG_ON(OID_NUM_LAST <= n);
+ BUG_ON(extra > isl_oid[n].range);
+
+ if (!priv->mib)
+ /* memory has been freed */
+ return -1;
+
+ dlen = isl_oid[n].size;
+ cache = priv->mib[n];
+ cache += (cache ? extra * dlen : 0);
+ oid = isl_oid[n].oid + extra;
+
+ if (_data == NULL)
+ /* we are requested to re-set a cached value */
+ _data = cache;
+ else
+ mgt_cpu_to_le(isl_oid[n].flags & OID_FLAG_TYPE, _data);
+ /* If we are going to write to the cache, we don't want anyone to read
+ * it -> acquire write lock.
+ * Else we could acquire a read lock to be sure we don't bother the
+ * commit process (which takes a write lock). But I'm not sure if it's
+ * needed.
+ */
+ if (cache)
+ down_write(&priv->mib_sem);
+
+ if (islpci_get_state(priv) >= PRV_STATE_READY) {
+ ret = islpci_mgt_transaction(priv->ndev, PIMFOR_OP_SET, oid,
+ _data, dlen, &response);
+ if (!ret) {
+ response_op = response->header->operation;
+ islpci_mgt_release(response);
+ }
+ if (ret || response_op == PIMFOR_OP_ERROR)
+ ret = -EIO;
+ } else if (!cache)
+ ret = -EIO;
+
+ if (cache) {
+ if (!ret && data)
+ memcpy(cache, _data, dlen);
+ up_write(&priv->mib_sem);
+ }
+
+ /* re-set given data to what it was */
+ if (data)
+ mgt_le_to_cpu(isl_oid[n].flags & OID_FLAG_TYPE, data);
+
+ return ret;
+}
+
+/* None of these are cached */
+int
+mgt_set_varlen(islpci_private *priv, enum oid_num_t n, void *data, int extra_len)
+{
+ int ret = 0;
+ struct islpci_mgmtframe *response;
+ int response_op = PIMFOR_OP_ERROR;
+ int dlen;
+ u32 oid;
+
+ BUG_ON(OID_NUM_LAST <= n);
+
+ dlen = isl_oid[n].size;
+ oid = isl_oid[n].oid;
+
+ mgt_cpu_to_le(isl_oid[n].flags & OID_FLAG_TYPE, data);
+
+ if (islpci_get_state(priv) >= PRV_STATE_READY) {
+ ret = islpci_mgt_transaction(priv->ndev, PIMFOR_OP_SET, oid,
+ data, dlen + extra_len, &response);
+ if (!ret) {
+ response_op = response->header->operation;
+ islpci_mgt_release(response);
+ }
+ if (ret || response_op == PIMFOR_OP_ERROR)
+ ret = -EIO;
+ } else
+ ret = -EIO;
+
+ /* re-set given data to what it was */
+ if (data)
+ mgt_le_to_cpu(isl_oid[n].flags & OID_FLAG_TYPE, data);
+
+ return ret;
+}
+
+int
+mgt_get_request(islpci_private *priv, enum oid_num_t n, int extra, void *data,
+ union oid_res_t *res)
+{
+
+ int ret = -EIO;
+ int reslen = 0;
+ struct islpci_mgmtframe *response = NULL;
+
+ int dlen;
+ void *cache, *_res = NULL;
+ u32 oid;
+
+ BUG_ON(OID_NUM_LAST <= n);
+ BUG_ON(extra > isl_oid[n].range);
+
+ res->ptr = NULL;
+
+ if (!priv->mib)
+ /* memory has been freed */
+ return -1;
+
+ dlen = isl_oid[n].size;
+ cache = priv->mib[n];
+ cache += cache ? extra * dlen : 0;
+ oid = isl_oid[n].oid + extra;
+ reslen = dlen;
+
+ if (cache)
+ down_read(&priv->mib_sem);
+
+ if (islpci_get_state(priv) >= PRV_STATE_READY) {
+ ret = islpci_mgt_transaction(priv->ndev, PIMFOR_OP_GET,
+ oid, data, dlen, &response);
+ if (ret || !response ||
+ response->header->operation == PIMFOR_OP_ERROR) {
+ if (response)
+ islpci_mgt_release(response);
+ ret = -EIO;
+ }
+ if (!ret) {
+ _res = response->data;
+ reslen = response->header->length;
+ }
+ } else if (cache) {
+ _res = cache;
+ ret = 0;
+ }
+ if ((isl_oid[n].flags & OID_FLAG_TYPE) == OID_TYPE_U32)
+ res->u = ret ? 0 : le32_to_cpu(*(u32 *) _res);
+ else {
+ res->ptr = kmalloc(reslen, GFP_KERNEL);
+ BUG_ON(res->ptr == NULL);
+ if (ret)
+ memset(res->ptr, 0, reslen);
+ else {
+ memcpy(res->ptr, _res, reslen);
+ mgt_le_to_cpu(isl_oid[n].flags & OID_FLAG_TYPE,
+ res->ptr);
+ }
+ }
+ if (cache)
+ up_read(&priv->mib_sem);
+
+ if (response && !ret)
+ islpci_mgt_release(response);
+
+ if (reslen > isl_oid[n].size)
+ printk(KERN_DEBUG
+ "mgt_get_request(0x%x): received data length was bigger "
+ "than expected (%d > %d). Memory is probably corrupted...",
+ oid, reslen, isl_oid[n].size);
+
+ return ret;
+}
+
+/* lock outside */
+int
+mgt_commit_list(islpci_private *priv, enum oid_num_t *l, int n)
+{
+ int i, ret = 0;
+ struct islpci_mgmtframe *response;
+
+ for (i = 0; i < n; i++) {
+ struct oid_t *t = &(isl_oid[l[i]]);
+ void *data = priv->mib[l[i]];
+ int j = 0;
+ u32 oid = t->oid;
+ BUG_ON(data == NULL);
+ while (j <= t->range) {
+ int r = islpci_mgt_transaction(priv->ndev, PIMFOR_OP_SET,
+ oid, data, t->size,
+ &response);
+ if (response) {
+ r |= (response->header->operation == PIMFOR_OP_ERROR);
+ islpci_mgt_release(response);
+ }
+ if (r)
+ printk(KERN_ERR "%s: mgt_commit_list: failure. "
+ "oid=%08x err=%d\n",
+ priv->ndev->name, oid, r);
+ ret |= r;
+ j++;
+ oid++;
+ data += t->size;
+ }
+ }
+ return ret;
+}
+
+/* Lock outside */
+
+void
+mgt_set(islpci_private *priv, enum oid_num_t n, void *data)
+{
+ BUG_ON(OID_NUM_LAST <= n);
+ BUG_ON(priv->mib[n] == NULL);
+
+ memcpy(priv->mib[n], data, isl_oid[n].size);
+ mgt_cpu_to_le(isl_oid[n].flags & OID_FLAG_TYPE, priv->mib[n]);
+}
+
+void
+mgt_get(islpci_private *priv, enum oid_num_t n, void *res)
+{
+ BUG_ON(OID_NUM_LAST <= n);
+ BUG_ON(priv->mib[n] == NULL);
+ BUG_ON(res == NULL);
+
+ memcpy(res, priv->mib[n], isl_oid[n].size);
+ mgt_le_to_cpu(isl_oid[n].flags & OID_FLAG_TYPE, res);
+}
+
+/* Commits the cache. Lock outside. */
+
+static enum oid_num_t commit_part1[] = {
+ OID_INL_CONFIG,
+ OID_INL_MODE,
+ DOT11_OID_BSSTYPE,
+ DOT11_OID_CHANNEL,
+ DOT11_OID_MLMEAUTOLEVEL
+};
+
+static enum oid_num_t commit_part2[] = {
+ DOT11_OID_SSID,
+ DOT11_OID_PSMBUFFER,
+ DOT11_OID_AUTHENABLE,
+ DOT11_OID_PRIVACYINVOKED,
+ DOT11_OID_EXUNENCRYPTED,
+ DOT11_OID_DEFKEYX, /* MULTIPLE */
+ DOT11_OID_DEFKEYID,
+ DOT11_OID_DOT1XENABLE,
+ OID_INL_DOT11D_CONFORMANCE,
+ /* Do not initialize this - fw < 1.0.4.3 rejects it
+ OID_INL_OUTPUTPOWER,
+ */
+};
+
+/* update the MAC addr. */
+static int
+mgt_update_addr(islpci_private *priv)
+{
+ struct islpci_mgmtframe *res;
+ int ret;
+
+ ret = islpci_mgt_transaction(priv->ndev, PIMFOR_OP_GET,
+ isl_oid[GEN_OID_MACADDRESS].oid, NULL,
+ isl_oid[GEN_OID_MACADDRESS].size, &res);
+
+ if ((ret == 0) && res && (res->header->operation != PIMFOR_OP_ERROR))
+ memcpy(priv->ndev->dev_addr, res->data, 6);
+ else
+ ret = -EIO;
+ if (res)
+ islpci_mgt_release(res);
+
+ if (ret)
+ printk(KERN_ERR "%s: mgt_update_addr: failure\n", priv->ndev->name);
+ return ret;
+}
+
+#define VEC_SIZE(a) (sizeof(a)/sizeof(a[0]))
+
+int
+mgt_commit(islpci_private *priv)
+{
+ int rvalue;
+ u32 u;
+
+ if (islpci_get_state(priv) < PRV_STATE_INIT)
+ return 0;
+
+ rvalue = mgt_commit_list(priv, commit_part1, VEC_SIZE(commit_part1));
+
+ if (priv->iw_mode != IW_MODE_MONITOR)
+ rvalue |= mgt_commit_list(priv, commit_part2, VEC_SIZE(commit_part2));
+
+ u = OID_INL_MODE;
+ rvalue |= mgt_commit_list(priv, &u, 1);
+ rvalue |= mgt_update_addr(priv);
+
+ if (rvalue) {
+ /* some request have failed. The device might be in an
+ incoherent state. We should reset it ! */
+ printk(KERN_DEBUG "%s: mgt_commit: failure\n", priv->ndev->name);
+ }
+ return rvalue;
+}
+
+/* The following OIDs need to be "unlatched":
+ *
+ * MEDIUMLIMIT,BEACONPERIOD,DTIMPERIOD,ATIMWINDOW,LISTENINTERVAL
+ * FREQUENCY,EXTENDEDRATES.
+ *
+ * The way to do this is to set ESSID. Note though that they may get
+ * unlatch before though by setting another OID. */
+#if 0
+void
+mgt_unlatch_all(islpci_private *priv)
+{
+ u32 u;
+ int rvalue = 0;
+
+ if (islpci_get_state(priv) < PRV_STATE_INIT)
+ return;
+
+ u = DOT11_OID_SSID;
+ rvalue = mgt_commit_list(priv, &u, 1);
+ /* Necessary if in MANUAL RUN mode? */
+#if 0
+ u = OID_INL_MODE;
+ rvalue |= mgt_commit_list(priv, &u, 1);
+
+ u = DOT11_OID_MLMEAUTOLEVEL;
+ rvalue |= mgt_commit_list(priv, &u, 1);
+
+ u = OID_INL_MODE;
+ rvalue |= mgt_commit_list(priv, &u, 1);
+#endif
+
+ if (rvalue)
+ printk(KERN_DEBUG "%s: Unlatching OIDs failed\n", priv->ndev->name);
+}
+#endif
+
+/* This will tell you if you are allowed to answer a mlme(ex) request .*/
+
+int
+mgt_mlme_answer(islpci_private *priv)
+{
+ u32 mlmeautolevel;
+ /* Acquire a read lock because if we are in a mode change, it's
+ * possible to answer true, while the card is leaving master to managed
+ * mode. Answering to a mlme in this situation could hang the card.
+ */
+ down_read(&priv->mib_sem);
+ mlmeautolevel =
+ le32_to_cpu(*(u32 *) priv->mib[DOT11_OID_MLMEAUTOLEVEL]);
+ up_read(&priv->mib_sem);
+
+ return ((priv->iw_mode == IW_MODE_MASTER) &&
+ (mlmeautolevel >= DOT11_MLME_INTERMEDIATE));
+}
+
+enum oid_num_t
+mgt_oidtonum(u32 oid)
+{
+ int i;
+
+ for (i = 0; i < OID_NUM_LAST; i++)
+ if (isl_oid[i].oid == oid)
+ return i;
+
+ printk(KERN_DEBUG "looking for an unknown oid 0x%x", oid);
+
+ return OID_NUM_LAST;
+}
+
+int
+mgt_response_to_str(enum oid_num_t n, union oid_res_t *r, char *str)
+{
+ switch (isl_oid[n].flags & OID_FLAG_TYPE) {
+ case OID_TYPE_U32:
+ return snprintf(str, PRIV_STR_SIZE, "%u\n", r->u);
+ break;
+ case OID_TYPE_BUFFER:{
+ struct obj_buffer *buff = r->ptr;
+ return snprintf(str, PRIV_STR_SIZE,
+ "size=%u\naddr=0x%X\n", buff->size,
+ buff->addr);
+ }
+ break;
+ case OID_TYPE_BSS:{
+ struct obj_bss *bss = r->ptr;
+ return snprintf(str, PRIV_STR_SIZE,
+ "age=%u\nchannel=%u\n"
+ "capinfo=0x%X\nrates=0x%X\n"
+ "basic_rates=0x%X\n", bss->age,
+ bss->channel, bss->capinfo,
+ bss->rates, bss->basic_rates);
+ }
+ break;
+ case OID_TYPE_BSSLIST:{
+ struct obj_bsslist *list = r->ptr;
+ int i, k;
+ k = snprintf(str, PRIV_STR_SIZE, "nr=%u\n", list->nr);
+ for (i = 0; i < list->nr; i++)
+ k += snprintf(str + k, PRIV_STR_SIZE - k,
+ "bss[%u] : \nage=%u\nchannel=%u\n"
+ "capinfo=0x%X\nrates=0x%X\n"
+ "basic_rates=0x%X\n",
+ i, list->bsslist[i].age,
+ list->bsslist[i].channel,
+ list->bsslist[i].capinfo,
+ list->bsslist[i].rates,
+ list->bsslist[i].basic_rates);
+ return k;
+ }
+ break;
+ case OID_TYPE_FREQUENCIES:{
+ struct obj_frequencies *freq = r->ptr;
+ int i, t;
+ printk("nr : %u\n", freq->nr);
+ t = snprintf(str, PRIV_STR_SIZE, "nr=%u\n", freq->nr);
+ for (i = 0; i < freq->nr; i++)
+ t += snprintf(str + t, PRIV_STR_SIZE - t,
+ "mhz[%u]=%u\n", i, freq->mhz[i]);
+ return t;
+ }
+ break;
+ case OID_TYPE_MLME:{
+ struct obj_mlme *mlme = r->ptr;
+ return snprintf(str, PRIV_STR_SIZE,
+ "id=0x%X\nstate=0x%X\ncode=0x%X\n",
+ mlme->id, mlme->state, mlme->code);
+ }
+ break;
+ case OID_TYPE_MLMEEX:{
+ struct obj_mlmeex *mlme = r->ptr;
+ return snprintf(str, PRIV_STR_SIZE,
+ "id=0x%X\nstate=0x%X\n"
+ "code=0x%X\nsize=0x%X\n", mlme->id,
+ mlme->state, mlme->code, mlme->size);
+ }
+ break;
+ case OID_TYPE_ATTACH:{
+ struct obj_attachment *attach = r->ptr;
+ return snprintf(str, PRIV_STR_SIZE,
+ "id=%d\nsize=%d\n",
+ attach->id,
+ attach->size);
+ }
+ break;
+ case OID_TYPE_SSID:{
+ struct obj_ssid *ssid = r->ptr;
+ return snprintf(str, PRIV_STR_SIZE,
+ "length=%u\noctets=%.*s\n",
+ ssid->length, ssid->length,
+ ssid->octets);
+ }
+ break;
+ case OID_TYPE_KEY:{
+ struct obj_key *key = r->ptr;
+ int t, i;
+ t = snprintf(str, PRIV_STR_SIZE,
+ "type=0x%X\nlength=0x%X\nkey=0x",
+ key->type, key->length);
+ for (i = 0; i < key->length; i++)
+ t += snprintf(str + t, PRIV_STR_SIZE - t,
+ "%02X:", key->key[i]);
+ t += snprintf(str + t, PRIV_STR_SIZE - t, "\n");
+ return t;
+ }
+ break;
+ case OID_TYPE_RAW:
+ case OID_TYPE_ADDR:{
+ unsigned char *buff = r->ptr;
+ int t, i;
+ t = snprintf(str, PRIV_STR_SIZE, "hex data=");
+ for (i = 0; i < isl_oid[n].size; i++)
+ t += snprintf(str + t, PRIV_STR_SIZE - t,
+ "%02X:", buff[i]);
+ t += snprintf(str + t, PRIV_STR_SIZE - t, "\n");
+ return t;
+ }
+ break;
+ default:
+ BUG();
+ }
+ return 0;
+}
diff --git a/drivers/net/wireless/prism54/oid_mgt.h b/drivers/net/wireless/prism54/oid_mgt.h
new file mode 100644
index 0000000..92c8a2d
--- /dev/null
+++ b/drivers/net/wireless/prism54/oid_mgt.h
@@ -0,0 +1,59 @@
+/*
+ * Copyright (C) 2003 Aurelien Alleaume <slts@free.fr>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#if !defined(_OID_MGT_H)
+#define _OID_MGT_H
+
+#include "isl_oid.h"
+#include "islpci_dev.h"
+
+extern struct oid_t isl_oid[];
+
+int mgt_init(islpci_private *);
+
+void mgt_clean(islpci_private *);
+
+/* I don't know where to put these 2 */
+extern const int frequency_list_a[];
+int channel_of_freq(int);
+
+void mgt_le_to_cpu(int, void *);
+
+int mgt_set_request(islpci_private *, enum oid_num_t, int, void *);
+int mgt_set_varlen(islpci_private *, enum oid_num_t, void *, int);
+
+
+int mgt_get_request(islpci_private *, enum oid_num_t, int, void *,
+ union oid_res_t *);
+
+int mgt_commit_list(islpci_private *, enum oid_num_t *, int);
+
+void mgt_set(islpci_private *, enum oid_num_t, void *);
+
+void mgt_get(islpci_private *, enum oid_num_t, void *);
+
+int mgt_commit(islpci_private *);
+
+int mgt_mlme_answer(islpci_private *);
+
+enum oid_num_t mgt_oidtonum(u32 oid);
+
+int mgt_response_to_str(enum oid_num_t, union oid_res_t *, char *);
+
+#endif /* !defined(_OID_MGT_H) */
+/* EOF */
diff --git a/drivers/net/wireless/prism54/prismcompat.h b/drivers/net/wireless/prism54/prismcompat.h
new file mode 100644
index 0000000..55541c0
--- /dev/null
+++ b/drivers/net/wireless/prism54/prismcompat.h
@@ -0,0 +1,44 @@
+/*
+ * (C) 2004 Margit Schubert-While <margitsw@t-online.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+/*
+ * Compatibility header file to aid support of different kernel versions
+ */
+
+#ifdef PRISM54_COMPAT24
+#include "prismcompat24.h"
+#else /* PRISM54_COMPAT24 */
+
+#ifndef _PRISM_COMPAT_H
+#define _PRISM_COMPAT_H
+
+#include <linux/device.h>
+#include <linux/firmware.h>
+#include <linux/config.h>
+#include <linux/moduleparam.h>
+#include <linux/workqueue.h>
+#include <linux/compiler.h>
+
+#ifndef __iomem
+#define __iomem
+#endif
+
+#define PRISM_FW_PDEV &priv->pdev->dev
+
+#endif /* _PRISM_COMPAT_H */
+#endif /* PRISM54_COMPAT24 */
diff --git a/drivers/net/wireless/ray_cs.c b/drivers/net/wireless/ray_cs.c
new file mode 100644
index 0000000..6e5bda5
--- /dev/null
+++ b/drivers/net/wireless/ray_cs.c
@@ -0,0 +1,2957 @@
+/*=============================================================================
+ *
+ * A PCMCIA client driver for the Raylink wireless LAN card.
+ * The starting point for this module was the skeleton.c in the
+ * PCMCIA 2.9.12 package written by David Hinds, dahinds@users.sourceforge.net
+ *
+ *
+ * Copyright (c) 1998 Corey Thomas (corey@world.std.com)
+ *
+ * This driver is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 only of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * It is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
+ *
+ * Changes:
+ * Arnaldo Carvalho de Melo <acme@conectiva.com.br> - 08/08/2000
+ * - reorganize kmallocs in ray_attach, checking all for failure
+ * and releasing the previous allocations if one fails
+ *
+ * Daniele Bellucci <bellucda@tiscali.it> - 07/10/2003
+ * - Audit copy_to_user in ioctl(SIOCGIWESSID)
+ *
+=============================================================================*/
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/proc_fs.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/if_arp.h>
+#include <linux/ioport.h>
+#include <linux/skbuff.h>
+#include <linux/ethtool.h>
+
+#include <pcmcia/version.h>
+#include <pcmcia/cs_types.h>
+#include <pcmcia/cs.h>
+#include <pcmcia/cistpl.h>
+#include <pcmcia/cisreg.h>
+#include <pcmcia/ds.h>
+#include <pcmcia/mem_op.h>
+
+#include <linux/wireless.h>
+
+#include <asm/io.h>
+#include <asm/system.h>
+#include <asm/byteorder.h>
+#include <asm/uaccess.h>
+
+/* Warning : these stuff will slow down the driver... */
+#define WIRELESS_SPY /* Enable spying addresses */
+/* Definitions we need for spy */
+typedef struct iw_statistics iw_stats;
+typedef struct iw_quality iw_qual;
+typedef u_char mac_addr[ETH_ALEN]; /* Hardware address */
+
+#include "rayctl.h"
+#include "ray_cs.h"
+
+/* All the PCMCIA modules use PCMCIA_DEBUG to control debugging. If
+ you do not define PCMCIA_DEBUG at all, all the debug code will be
+ left out. If you compile with PCMCIA_DEBUG=0, the debug code will
+ be present but disabled -- but it can then be enabled for specific
+ modules at load time with a 'pc_debug=#' option to insmod.
+*/
+
+#ifdef RAYLINK_DEBUG
+#define PCMCIA_DEBUG RAYLINK_DEBUG
+#endif
+#ifdef PCMCIA_DEBUG
+static int ray_debug;
+static int pc_debug = PCMCIA_DEBUG;
+module_param(pc_debug, int, 0);
+/* #define DEBUG(n, args...) if (pc_debug>(n)) printk(KERN_DEBUG args); */
+#define DEBUG(n, args...) if (pc_debug>(n)) printk(args);
+#else
+#define DEBUG(n, args...)
+#endif
+/** Prototypes based on PCMCIA skeleton driver *******************************/
+static void ray_config(dev_link_t *link);
+static void ray_release(dev_link_t *link);
+static int ray_event(event_t event, int priority, event_callback_args_t *args);
+static dev_link_t *ray_attach(void);
+static void ray_detach(dev_link_t *);
+
+/***** Prototypes indicated by device structure ******************************/
+static int ray_dev_close(struct net_device *dev);
+static int ray_dev_config(struct net_device *dev, struct ifmap *map);
+static struct net_device_stats *ray_get_stats(struct net_device *dev);
+static int ray_dev_init(struct net_device *dev);
+static int ray_dev_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd);
+
+static struct ethtool_ops netdev_ethtool_ops;
+
+static int ray_open(struct net_device *dev);
+static int ray_dev_start_xmit(struct sk_buff *skb, struct net_device *dev);
+static void set_multicast_list(struct net_device *dev);
+static void ray_update_multi_list(struct net_device *dev, int all);
+static int translate_frame(ray_dev_t *local, struct tx_msg __iomem *ptx,
+ unsigned char *data, int len);
+static void ray_build_header(ray_dev_t *local, struct tx_msg __iomem *ptx, UCHAR msg_type,
+ unsigned char *data);
+static void untranslate(ray_dev_t *local, struct sk_buff *skb, int len);
+#if WIRELESS_EXT > 7 /* If wireless extension exist in the kernel */
+static iw_stats * ray_get_wireless_stats(struct net_device * dev);
+#endif /* WIRELESS_EXT > 7 */
+
+/***** Prototypes for raylink functions **************************************/
+static int asc_to_int(char a);
+static void authenticate(ray_dev_t *local);
+static int build_auth_frame(ray_dev_t *local, UCHAR *dest, int auth_type);
+static void authenticate_timeout(u_long);
+static int get_free_ccs(ray_dev_t *local);
+static int get_free_tx_ccs(ray_dev_t *local);
+static void init_startup_params(ray_dev_t *local);
+static int parse_addr(char *in_str, UCHAR *out);
+static int ray_hw_xmit(unsigned char* data, int len, struct net_device* dev, UCHAR type);
+static int ray_init(struct net_device *dev);
+static int interrupt_ecf(ray_dev_t *local, int ccs);
+static void ray_reset(struct net_device *dev);
+static void ray_update_parm(struct net_device *dev, UCHAR objid, UCHAR *value, int len);
+static void verify_dl_startup(u_long);
+
+/* Prototypes for interrpt time functions **********************************/
+static irqreturn_t ray_interrupt (int reg, void *dev_id, struct pt_regs *regs);
+static void clear_interrupt(ray_dev_t *local);
+static void rx_deauthenticate(ray_dev_t *local, struct rcs __iomem *prcs,
+ unsigned int pkt_addr, int rx_len);
+static int copy_from_rx_buff(ray_dev_t *local, UCHAR *dest, int pkt_addr, int len);
+static void ray_rx(struct net_device *dev, ray_dev_t *local, struct rcs __iomem *prcs);
+static void release_frag_chain(ray_dev_t *local, struct rcs __iomem *prcs);
+static void rx_authenticate(ray_dev_t *local, struct rcs __iomem *prcs,
+ unsigned int pkt_addr, int rx_len);
+static void rx_data(struct net_device *dev, struct rcs __iomem *prcs, unsigned int pkt_addr,
+ int rx_len);
+static void associate(ray_dev_t *local);
+
+/* Card command functions */
+static int dl_startup_params(struct net_device *dev);
+static void join_net(u_long local);
+static void start_net(u_long local);
+/* void start_net(ray_dev_t *local); */
+
+/*===========================================================================*/
+/* Parameters that can be set with 'insmod' */
+
+/* ADHOC=0, Infrastructure=1 */
+static int net_type = ADHOC;
+
+/* Hop dwell time in Kus (1024 us units defined by 802.11) */
+static int hop_dwell = 128;
+
+/* Beacon period in Kus */
+static int beacon_period = 256;
+
+/* power save mode (0 = off, 1 = save power) */
+static int psm;
+
+/* String for network's Extended Service Set ID. 32 Characters max */
+static char *essid;
+
+/* Default to encapsulation unless translation requested */
+static int translate = 1;
+
+static int country = USA;
+
+static int sniffer;
+
+static int bc;
+
+/* 48 bit physical card address if overriding card's real physical
+ * address is required. Since IEEE 802.11 addresses are 48 bits
+ * like ethernet, an int can't be used, so a string is used. To
+ * allow use of addresses starting with a decimal digit, the first
+ * character must be a letter and will be ignored. This letter is
+ * followed by up to 12 hex digits which are the address. If less
+ * than 12 digits are used, the address will be left filled with 0's.
+ * Note that bit 0 of the first byte is the broadcast bit, and evil
+ * things will happen if it is not 0 in a card address.
+ */
+static char *phy_addr = NULL;
+
+
+/* The dev_info variable is the "key" that is used to match up this
+ device driver with appropriate cards, through the card configuration
+ database.
+*/
+static dev_info_t dev_info = "ray_cs";
+
+/* A linked list of "instances" of the ray device. Each actual
+ PCMCIA card corresponds to one device instance, and is described
+ by one dev_link_t structure (defined in ds.h).
+*/
+static dev_link_t *dev_list = NULL;
+
+/* A dev_link_t structure has fields for most things that are needed
+ to keep track of a socket, but there will usually be some device
+ specific information that also needs to be kept track of. The
+ 'priv' pointer in a dev_link_t structure can be used to point to
+ a device-specific private data structure, like this.
+*/
+static unsigned int ray_mem_speed = 500;
+
+MODULE_AUTHOR("Corey Thomas <corey@world.std.com>");
+MODULE_DESCRIPTION("Raylink/WebGear wireless LAN driver");
+MODULE_LICENSE("GPL");
+
+module_param(net_type, int, 0);
+module_param(hop_dwell, int, 0);
+module_param(beacon_period, int, 0);
+module_param(psm, int, 0);
+module_param(essid, charp, 0);
+module_param(translate, int, 0);
+module_param(country, int, 0);
+module_param(sniffer, int, 0);
+module_param(bc, int, 0);
+module_param(phy_addr, charp, 0);
+module_param(ray_mem_speed, int, 0);
+
+static UCHAR b5_default_startup_parms[] = {
+ 0, 0, /* Adhoc station */
+ 'L','I','N','U','X', 0, 0, 0, /* 32 char ESSID */
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ 1, 0, /* Active scan, CA Mode */
+ 0, 0, 0, 0, 0, 0, /* No default MAC addr */
+ 0x7f, 0xff, /* Frag threshold */
+ 0x00, 0x80, /* Hop time 128 Kus*/
+ 0x01, 0x00, /* Beacon period 256 Kus */
+ 0x01, 0x07, 0xa3, /* DTIM, retries, ack timeout*/
+ 0x1d, 0x82, 0x4e, /* SIFS, DIFS, PIFS */
+ 0x7f, 0xff, /* RTS threshold */
+ 0x04, 0xe2, 0x38, 0xA4, /* scan_dwell, max_scan_dwell */
+ 0x05, /* assoc resp timeout thresh */
+ 0x08, 0x02, 0x08, /* adhoc, infra, super cycle max*/
+ 0, /* Promiscuous mode */
+ 0x0c, 0x0bd, /* Unique word */
+ 0x32, /* Slot time */
+ 0xff, 0xff, /* roam-low snr, low snr count */
+ 0x05, 0xff, /* Infra, adhoc missed bcn thresh */
+ 0x01, 0x0b, 0x4f, /* USA, hop pattern, hop pat length */
+/* b4 - b5 differences start here */
+ 0x00, 0x3f, /* CW max */
+ 0x00, 0x0f, /* CW min */
+ 0x04, 0x08, /* Noise gain, limit offset */
+ 0x28, 0x28, /* det rssi, med busy offsets */
+ 7, /* det sync thresh */
+ 0, 2, 2, /* test mode, min, max */
+ 0, /* allow broadcast SSID probe resp */
+ 0, 0, /* privacy must start, can join */
+ 2, 0, 0, 0, 0, 0, 0, 0 /* basic rate set */
+};
+
+static UCHAR b4_default_startup_parms[] = {
+ 0, 0, /* Adhoc station */
+ 'L','I','N','U','X', 0, 0, 0, /* 32 char ESSID */
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ 1, 0, /* Active scan, CA Mode */
+ 0, 0, 0, 0, 0, 0, /* No default MAC addr */
+ 0x7f, 0xff, /* Frag threshold */
+ 0x02, 0x00, /* Hop time */
+ 0x00, 0x01, /* Beacon period */
+ 0x01, 0x07, 0xa3, /* DTIM, retries, ack timeout*/
+ 0x1d, 0x82, 0xce, /* SIFS, DIFS, PIFS */
+ 0x7f, 0xff, /* RTS threshold */
+ 0xfb, 0x1e, 0xc7, 0x5c, /* scan_dwell, max_scan_dwell */
+ 0x05, /* assoc resp timeout thresh */
+ 0x04, 0x02, 0x4, /* adhoc, infra, super cycle max*/
+ 0, /* Promiscuous mode */
+ 0x0c, 0x0bd, /* Unique word */
+ 0x4e, /* Slot time (TBD seems wrong)*/
+ 0xff, 0xff, /* roam-low snr, low snr count */
+ 0x05, 0xff, /* Infra, adhoc missed bcn thresh */
+ 0x01, 0x0b, 0x4e, /* USA, hop pattern, hop pat length */
+/* b4 - b5 differences start here */
+ 0x3f, 0x0f, /* CW max, min */
+ 0x04, 0x08, /* Noise gain, limit offset */
+ 0x28, 0x28, /* det rssi, med busy offsets */
+ 7, /* det sync thresh */
+ 0, 2, 2 /* test mode, min, max*/
+};
+/*===========================================================================*/
+static unsigned char eth2_llc[] = {0xaa, 0xaa, 3, 0, 0, 0};
+
+static char hop_pattern_length[] = { 1,
+ USA_HOP_MOD, EUROPE_HOP_MOD,
+ JAPAN_HOP_MOD, KOREA_HOP_MOD,
+ SPAIN_HOP_MOD, FRANCE_HOP_MOD,
+ ISRAEL_HOP_MOD, AUSTRALIA_HOP_MOD,
+ JAPAN_TEST_HOP_MOD
+};
+
+static char rcsid[] = "Raylink/WebGear wireless LAN - Corey <Thomas corey@world.std.com>";
+
+/*=============================================================================
+ ray_attach() creates an "instance" of the driver, allocating
+ local data structures for one device. The device is registered
+ with Card Services.
+ The dev_link structure is initialized, but we don't actually
+ configure the card at this point -- we wait until we receive a
+ card insertion event.
+=============================================================================*/
+static dev_link_t *ray_attach(void)
+{
+ client_reg_t client_reg;
+ dev_link_t *link;
+ ray_dev_t *local;
+ int ret;
+ struct net_device *dev;
+
+ DEBUG(1, "ray_attach()\n");
+
+ /* Initialize the dev_link_t structure */
+ link = kmalloc(sizeof(struct dev_link_t), GFP_KERNEL);
+
+ if (!link)
+ return NULL;
+
+ /* Allocate space for private device-specific data */
+ dev = alloc_etherdev(sizeof(ray_dev_t));
+
+ if (!dev)
+ goto fail_alloc_dev;
+
+ local = dev->priv;
+
+ memset(link, 0, sizeof(struct dev_link_t));
+
+ /* The io structure describes IO port mapping. None used here */
+ link->io.NumPorts1 = 0;
+ link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
+ link->io.IOAddrLines = 5;
+
+ /* Interrupt setup. For PCMCIA, driver takes what's given */
+ link->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT;
+ link->irq.IRQInfo1 = IRQ_LEVEL_ID;
+ link->irq.Handler = &ray_interrupt;
+
+ /* General socket configuration */
+ link->conf.Attributes = CONF_ENABLE_IRQ;
+ link->conf.Vcc = 50;
+ link->conf.IntType = INT_MEMORY_AND_IO;
+ link->conf.ConfigIndex = 1;
+ link->conf.Present = PRESENT_OPTION;
+
+ link->priv = dev;
+ link->irq.Instance = dev;
+
+ local->finder = link;
+ local->card_status = CARD_INSERTED;
+ local->authentication_state = UNAUTHENTICATED;
+ local->num_multi = 0;
+ DEBUG(2,"ray_attach link = %p, dev = %p, local = %p, intr = %p\n",
+ link,dev,local,&ray_interrupt);
+
+ /* Raylink entries in the device structure */
+ dev->hard_start_xmit = &ray_dev_start_xmit;
+ dev->set_config = &ray_dev_config;
+ dev->get_stats = &ray_get_stats;
+ dev->do_ioctl = &ray_dev_ioctl;
+ SET_ETHTOOL_OPS(dev, &netdev_ethtool_ops);
+#if WIRELESS_EXT > 7 /* If wireless extension exist in the kernel */
+ dev->get_wireless_stats = ray_get_wireless_stats;
+#endif
+
+ dev->set_multicast_list = &set_multicast_list;
+
+ DEBUG(2,"ray_cs ray_attach calling ether_setup.)\n");
+ SET_MODULE_OWNER(dev);
+ dev->init = &ray_dev_init;
+ dev->open = &ray_open;
+ dev->stop = &ray_dev_close;
+ netif_stop_queue(dev);
+
+ /* Register with Card Services */
+ link->next = dev_list;
+ dev_list = link;
+ client_reg.dev_info = &dev_info;
+ client_reg.EventMask =
+ CS_EVENT_CARD_INSERTION | CS_EVENT_CARD_REMOVAL |
+ CS_EVENT_RESET_PHYSICAL | CS_EVENT_CARD_RESET |
+ CS_EVENT_PM_SUSPEND | CS_EVENT_PM_RESUME;
+ client_reg.event_handler = &ray_event;
+ client_reg.Version = 0x0210;
+ client_reg.event_callback_args.client_data = link;
+
+ DEBUG(2,"ray_cs ray_attach calling pcmcia_register_client(...)\n");
+
+ init_timer(&local->timer);
+
+ ret = pcmcia_register_client(&link->handle, &client_reg);
+ if (ret != 0) {
+ printk("ray_cs ray_attach RegisterClient unhappy - detaching\n");
+ cs_error(link->handle, RegisterClient, ret);
+ ray_detach(link);
+ return NULL;
+ }
+ DEBUG(2,"ray_cs ray_attach ending\n");
+ return link;
+
+fail_alloc_dev:
+ kfree(link);
+ return NULL;
+} /* ray_attach */
+/*=============================================================================
+ This deletes a driver "instance". The device is de-registered
+ with Card Services. If it has been released, all local data
+ structures are freed. Otherwise, the structures will be freed
+ when the device is released.
+=============================================================================*/
+static void ray_detach(dev_link_t *link)
+{
+ dev_link_t **linkp;
+
+ DEBUG(1, "ray_detach(0x%p)\n", link);
+
+ /* Locate device structure */
+ for (linkp = &dev_list; *linkp; linkp = &(*linkp)->next)
+ if (*linkp == link) break;
+ if (*linkp == NULL)
+ return;
+
+ /* If the device is currently configured and active, we won't
+ actually delete it yet. Instead, it is marked so that when
+ the release() function is called, that will trigger a proper
+ detach().
+ */
+ if (link->state & DEV_CONFIG)
+ ray_release(link);
+
+ /* Break the link with Card Services */
+ if (link->handle)
+ pcmcia_deregister_client(link->handle);
+
+ /* Unlink device structure, free pieces */
+ *linkp = link->next;
+ if (link->priv) {
+ struct net_device *dev = link->priv;
+ if (link->dev) unregister_netdev(dev);
+ free_netdev(dev);
+ }
+ kfree(link);
+ DEBUG(2,"ray_cs ray_detach ending\n");
+} /* ray_detach */
+/*=============================================================================
+ ray_config() is run after a CARD_INSERTION event
+ is received, to configure the PCMCIA socket, and to make the
+ ethernet device available to the system.
+=============================================================================*/
+#define CS_CHECK(fn, ret) \
+do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
+#define MAX_TUPLE_SIZE 128
+static void ray_config(dev_link_t *link)
+{
+ client_handle_t handle = link->handle;
+ tuple_t tuple;
+ cisparse_t parse;
+ int last_fn = 0, last_ret = 0;
+ int i;
+ u_char buf[MAX_TUPLE_SIZE];
+ win_req_t req;
+ memreq_t mem;
+ struct net_device *dev = (struct net_device *)link->priv;
+ ray_dev_t *local = (ray_dev_t *)dev->priv;
+
+ DEBUG(1, "ray_config(0x%p)\n", link);
+
+ /* This reads the card's CONFIG tuple to find its configuration regs */
+ tuple.DesiredTuple = CISTPL_CONFIG;
+ CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(handle, &tuple));
+ tuple.TupleData = buf;
+ tuple.TupleDataMax = MAX_TUPLE_SIZE;
+ tuple.TupleOffset = 0;
+ CS_CHECK(GetTupleData, pcmcia_get_tuple_data(handle, &tuple));
+ CS_CHECK(ParseTuple, pcmcia_parse_tuple(handle, &tuple, &parse));
+ link->conf.ConfigBase = parse.config.base;
+ link->conf.Present = parse.config.rmask[0];
+
+ /* Determine card type and firmware version */
+ buf[0] = buf[MAX_TUPLE_SIZE - 1] = 0;
+ tuple.DesiredTuple = CISTPL_VERS_1;
+ CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(handle, &tuple));
+ tuple.TupleData = buf;
+ tuple.TupleDataMax = MAX_TUPLE_SIZE;
+ tuple.TupleOffset = 2;
+ CS_CHECK(GetTupleData, pcmcia_get_tuple_data(handle, &tuple));
+
+ for (i=0; i<tuple.TupleDataLen - 4; i++)
+ if (buf[i] == 0) buf[i] = ' ';
+ printk(KERN_INFO "ray_cs Detected: %s\n",buf);
+
+ /* Configure card */
+ link->state |= DEV_CONFIG;
+
+ /* Now allocate an interrupt line. Note that this does not
+ actually assign a handler to the interrupt.
+ */
+ CS_CHECK(RequestIRQ, pcmcia_request_irq(link->handle, &link->irq));
+ dev->irq = link->irq.AssignedIRQ;
+
+ /* This actually configures the PCMCIA socket -- setting up
+ the I/O windows and the interrupt mapping.
+ */
+ CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link->handle, &link->conf));
+
+/*** Set up 32k window for shared memory (transmit and control) ************/
+ req.Attributes = WIN_DATA_WIDTH_8 | WIN_MEMORY_TYPE_CM | WIN_ENABLE | WIN_USE_WAIT;
+ req.Base = 0;
+ req.Size = 0x8000;
+ req.AccessSpeed = ray_mem_speed;
+ CS_CHECK(RequestWindow, pcmcia_request_window(&link->handle, &req, &link->win));
+ mem.CardOffset = 0x0000; mem.Page = 0;
+ CS_CHECK(MapMemPage, pcmcia_map_mem_page(link->win, &mem));
+ local->sram = ioremap(req.Base,req.Size);
+
+/*** Set up 16k window for shared memory (receive buffer) ***************/
+ req.Attributes = WIN_DATA_WIDTH_8 | WIN_MEMORY_TYPE_CM | WIN_ENABLE | WIN_USE_WAIT;
+ req.Base = 0;
+ req.Size = 0x4000;
+ req.AccessSpeed = ray_mem_speed;
+ CS_CHECK(RequestWindow, pcmcia_request_window(&link->handle, &req, &local->rmem_handle));
+ mem.CardOffset = 0x8000; mem.Page = 0;
+ CS_CHECK(MapMemPage, pcmcia_map_mem_page(local->rmem_handle, &mem));
+ local->rmem = ioremap(req.Base,req.Size);
+
+/*** Set up window for attribute memory ***********************************/
+ req.Attributes = WIN_DATA_WIDTH_8 | WIN_MEMORY_TYPE_AM | WIN_ENABLE | WIN_USE_WAIT;
+ req.Base = 0;
+ req.Size = 0x1000;
+ req.AccessSpeed = ray_mem_speed;
+ CS_CHECK(RequestWindow, pcmcia_request_window(&link->handle, &req, &local->amem_handle));
+ mem.CardOffset = 0x0000; mem.Page = 0;
+ CS_CHECK(MapMemPage, pcmcia_map_mem_page(local->amem_handle, &mem));
+ local->amem = ioremap(req.Base,req.Size);
+
+ DEBUG(3,"ray_config sram=%p\n",local->sram);
+ DEBUG(3,"ray_config rmem=%p\n",local->rmem);
+ DEBUG(3,"ray_config amem=%p\n",local->amem);
+ if (ray_init(dev) < 0) {
+ ray_release(link);
+ return;
+ }
+
+ SET_NETDEV_DEV(dev, &handle_to_dev(handle));
+ i = register_netdev(dev);
+ if (i != 0) {
+ printk("ray_config register_netdev() failed\n");
+ ray_release(link);
+ return;
+ }
+
+ strcpy(local->node.dev_name, dev->name);
+ link->dev = &local->node;
+
+ link->state &= ~DEV_CONFIG_PENDING;
+ printk(KERN_INFO "%s: RayLink, irq %d, hw_addr ",
+ dev->name, dev->irq);
+ for (i = 0; i < 6; i++)
+ printk("%02X%s", dev->dev_addr[i], ((i<5) ? ":" : "\n"));
+
+ return;
+
+cs_failed:
+ cs_error(link->handle, last_fn, last_ret);
+
+ ray_release(link);
+} /* ray_config */
+
+static inline struct ccs __iomem *ccs_base(ray_dev_t *dev)
+{
+ return dev->sram + CCS_BASE;
+}
+
+static inline struct rcs __iomem *rcs_base(ray_dev_t *dev)
+{
+ /*
+ * This looks nonsensical, since there is a separate
+ * RCS_BASE. But the difference between a "struct rcs"
+ * and a "struct ccs" ends up being in the _index_ off
+ * the base, so the base pointer is the same for both
+ * ccs/rcs.
+ */
+ return dev->sram + CCS_BASE;
+}
+
+/*===========================================================================*/
+static int ray_init(struct net_device *dev)
+{
+ int i;
+ UCHAR *p;
+ struct ccs __iomem *pccs;
+ ray_dev_t *local = (ray_dev_t *)dev->priv;
+ dev_link_t *link = local->finder;
+ DEBUG(1, "ray_init(0x%p)\n", dev);
+ if (!(link->state & DEV_PRESENT)) {
+ DEBUG(0,"ray_init - device not present\n");
+ return -1;
+ }
+
+ local->net_type = net_type;
+ local->sta_type = TYPE_STA;
+
+ /* Copy the startup results to local memory */
+ memcpy_fromio(&local->startup_res, local->sram + ECF_TO_HOST_BASE,\
+ sizeof(struct startup_res_6));
+
+ /* Check Power up test status and get mac address from card */
+ if (local->startup_res.startup_word != 0x80) {
+ printk(KERN_INFO "ray_init ERROR card status = %2x\n",
+ local->startup_res.startup_word);
+ local->card_status = CARD_INIT_ERROR;
+ return -1;
+ }
+
+ local->fw_ver = local->startup_res.firmware_version[0];
+ local->fw_bld = local->startup_res.firmware_version[1];
+ local->fw_var = local->startup_res.firmware_version[2];
+ DEBUG(1,"ray_init firmware version %d.%d \n",local->fw_ver, local->fw_bld);
+
+ local->tib_length = 0x20;
+ if ((local->fw_ver == 5) && (local->fw_bld >= 30))
+ local->tib_length = local->startup_res.tib_length;
+ DEBUG(2,"ray_init tib_length = 0x%02x\n", local->tib_length);
+ /* Initialize CCS's to buffer free state */
+ pccs = ccs_base(local);
+ for (i=0; i<NUMBER_OF_CCS; i++) {
+ writeb(CCS_BUFFER_FREE, &(pccs++)->buffer_status);
+ }
+ init_startup_params(local);
+
+ /* copy mac address to startup parameters */
+ if (parse_addr(phy_addr, local->sparm.b4.a_mac_addr))
+ {
+ p = local->sparm.b4.a_mac_addr;
+ }
+ else
+ {
+ memcpy(&local->sparm.b4.a_mac_addr,
+ &local->startup_res.station_addr, ADDRLEN);
+ p = local->sparm.b4.a_mac_addr;
+ }
+
+ clear_interrupt(local); /* Clear any interrupt from the card */
+ local->card_status = CARD_AWAITING_PARAM;
+ DEBUG(2,"ray_init ending\n");
+ return 0;
+} /* ray_init */
+/*===========================================================================*/
+/* Download startup parameters to the card and command it to read them */
+static int dl_startup_params(struct net_device *dev)
+{
+ int ccsindex;
+ ray_dev_t *local = (ray_dev_t *)dev->priv;
+ struct ccs __iomem *pccs;
+ dev_link_t *link = local->finder;
+
+ DEBUG(1,"dl_startup_params entered\n");
+ if (!(link->state & DEV_PRESENT)) {
+ DEBUG(2,"ray_cs dl_startup_params - device not present\n");
+ return -1;
+ }
+
+ /* Copy parameters to host to ECF area */
+ if (local->fw_ver == 0x55)
+ memcpy_toio(local->sram + HOST_TO_ECF_BASE, &local->sparm.b4,
+ sizeof(struct b4_startup_params));
+ else
+ memcpy_toio(local->sram + HOST_TO_ECF_BASE, &local->sparm.b5,
+ sizeof(struct b5_startup_params));
+
+
+ /* Fill in the CCS fields for the ECF */
+ if ((ccsindex = get_free_ccs(local)) < 0) return -1;
+ local->dl_param_ccs = ccsindex;
+ pccs = ccs_base(local) + ccsindex;
+ writeb(CCS_DOWNLOAD_STARTUP_PARAMS, &pccs->cmd);
+ DEBUG(2,"dl_startup_params start ccsindex = %d\n", local->dl_param_ccs);
+ /* Interrupt the firmware to process the command */
+ if (interrupt_ecf(local, ccsindex)) {
+ printk(KERN_INFO "ray dl_startup_params failed - "
+ "ECF not ready for intr\n");
+ local->card_status = CARD_DL_PARAM_ERROR;
+ writeb(CCS_BUFFER_FREE, &(pccs++)->buffer_status);
+ return -2;
+ }
+ local->card_status = CARD_DL_PARAM;
+ /* Start kernel timer to wait for dl startup to complete. */
+ local->timer.expires = jiffies + HZ/2;
+ local->timer.data = (long)local;
+ local->timer.function = &verify_dl_startup;
+ add_timer(&local->timer);
+ DEBUG(2,"ray_cs dl_startup_params started timer for verify_dl_startup\n");
+ return 0;
+} /* dl_startup_params */
+/*===========================================================================*/
+static void init_startup_params(ray_dev_t *local)
+{
+ int i;
+
+ if (country > JAPAN_TEST) country = USA;
+ else
+ if (country < USA) country = USA;
+ /* structure for hop time and beacon period is defined here using
+ * New 802.11D6.1 format. Card firmware is still using old format
+ * until version 6.
+ * Before After
+ * a_hop_time ms byte a_hop_time ms byte
+ * a_hop_time 2s byte a_hop_time ls byte
+ * a_hop_time ls byte a_beacon_period ms byte
+ * a_beacon_period a_beacon_period ls byte
+ *
+ * a_hop_time = uS a_hop_time = KuS
+ * a_beacon_period = hops a_beacon_period = KuS
+ */ /* 64ms = 010000 */
+ if (local->fw_ver == 0x55) {
+ memcpy((UCHAR *)&local->sparm.b4, b4_default_startup_parms,
+ sizeof(struct b4_startup_params));
+ /* Translate sane kus input values to old build 4/5 format */
+ /* i = hop time in uS truncated to 3 bytes */
+ i = (hop_dwell * 1024) & 0xffffff;
+ local->sparm.b4.a_hop_time[0] = (i >> 16) & 0xff;
+ local->sparm.b4.a_hop_time[1] = (i >> 8) & 0xff;
+ local->sparm.b4.a_beacon_period[0] = 0;
+ local->sparm.b4.a_beacon_period[1] =
+ ((beacon_period/hop_dwell) - 1) & 0xff;
+ local->sparm.b4.a_curr_country_code = country;
+ local->sparm.b4.a_hop_pattern_length =
+ hop_pattern_length[(int)country] - 1;
+ if (bc)
+ {
+ local->sparm.b4.a_ack_timeout = 0x50;
+ local->sparm.b4.a_sifs = 0x3f;
+ }
+ }
+ else { /* Version 5 uses real kus values */
+ memcpy((UCHAR *)&local->sparm.b5, b5_default_startup_parms,
+ sizeof(struct b5_startup_params));
+
+ local->sparm.b5.a_hop_time[0] = (hop_dwell >> 8) & 0xff;
+ local->sparm.b5.a_hop_time[1] = hop_dwell & 0xff;
+ local->sparm.b5.a_beacon_period[0] = (beacon_period >> 8) & 0xff;
+ local->sparm.b5.a_beacon_period[1] = beacon_period & 0xff;
+ if (psm)
+ local->sparm.b5.a_power_mgt_state = 1;
+ local->sparm.b5.a_curr_country_code = country;
+ local->sparm.b5.a_hop_pattern_length =
+ hop_pattern_length[(int)country];
+ }
+
+ local->sparm.b4.a_network_type = net_type & 0x01;
+ local->sparm.b4.a_acting_as_ap_status = TYPE_STA;
+
+ if (essid != NULL)
+ strncpy(local->sparm.b4.a_current_ess_id, essid, ESSID_SIZE);
+} /* init_startup_params */
+/*===========================================================================*/
+static void verify_dl_startup(u_long data)
+{
+ ray_dev_t *local = (ray_dev_t *)data;
+ struct ccs __iomem *pccs = ccs_base(local) + local->dl_param_ccs;
+ UCHAR status;
+ dev_link_t *link = local->finder;
+
+ if (!(link->state & DEV_PRESENT)) {
+ DEBUG(2,"ray_cs verify_dl_startup - device not present\n");
+ return;
+ }
+#ifdef PCMCIA_DEBUG
+ if (pc_debug > 2) {
+ int i;
+ printk(KERN_DEBUG "verify_dl_startup parameters sent via ccs %d:\n",
+ local->dl_param_ccs);
+ for (i=0; i<sizeof(struct b5_startup_params); i++) {
+ printk(" %2x", (unsigned int) readb(local->sram + HOST_TO_ECF_BASE + i));
+ }
+ printk("\n");
+ }
+#endif
+
+ status = readb(&pccs->buffer_status);
+ if (status!= CCS_BUFFER_FREE)
+ {
+ printk(KERN_INFO "Download startup params failed. Status = %d\n",
+ status);
+ local->card_status = CARD_DL_PARAM_ERROR;
+ return;
+ }
+ if (local->sparm.b4.a_network_type == ADHOC)
+ start_net((u_long)local);
+ else
+ join_net((u_long)local);
+
+ return;
+} /* end verify_dl_startup */
+/*===========================================================================*/
+/* Command card to start a network */
+static void start_net(u_long data)
+{
+ ray_dev_t *local = (ray_dev_t *)data;
+ struct ccs __iomem *pccs;
+ int ccsindex;
+ dev_link_t *link = local->finder;
+ if (!(link->state & DEV_PRESENT)) {
+ DEBUG(2,"ray_cs start_net - device not present\n");
+ return;
+ }
+ /* Fill in the CCS fields for the ECF */
+ if ((ccsindex = get_free_ccs(local)) < 0) return;
+ pccs = ccs_base(local) + ccsindex;
+ writeb(CCS_START_NETWORK, &pccs->cmd);
+ writeb(0, &pccs->var.start_network.update_param);
+ /* Interrupt the firmware to process the command */
+ if (interrupt_ecf(local, ccsindex)) {
+ DEBUG(1,"ray start net failed - card not ready for intr\n");
+ writeb(CCS_BUFFER_FREE, &(pccs++)->buffer_status);
+ return;
+ }
+ local->card_status = CARD_DOING_ACQ;
+ return;
+} /* end start_net */
+/*===========================================================================*/
+/* Command card to join a network */
+static void join_net(u_long data)
+{
+ ray_dev_t *local = (ray_dev_t *)data;
+
+ struct ccs __iomem *pccs;
+ int ccsindex;
+ dev_link_t *link = local->finder;
+
+ if (!(link->state & DEV_PRESENT)) {
+ DEBUG(2,"ray_cs join_net - device not present\n");
+ return;
+ }
+ /* Fill in the CCS fields for the ECF */
+ if ((ccsindex = get_free_ccs(local)) < 0) return;
+ pccs = ccs_base(local) + ccsindex;
+ writeb(CCS_JOIN_NETWORK, &pccs->cmd);
+ writeb(0, &pccs->var.join_network.update_param);
+ writeb(0, &pccs->var.join_network.net_initiated);
+ /* Interrupt the firmware to process the command */
+ if (interrupt_ecf(local, ccsindex)) {
+ DEBUG(1,"ray join net failed - card not ready for intr\n");
+ writeb(CCS_BUFFER_FREE, &(pccs++)->buffer_status);
+ return;
+ }
+ local->card_status = CARD_DOING_ACQ;
+ return;
+}
+/*============================================================================
+ After a card is removed, ray_release() will unregister the net
+ device, and release the PCMCIA configuration. If the device is
+ still open, this will be postponed until it is closed.
+=============================================================================*/
+static void ray_release(dev_link_t *link)
+{
+ struct net_device *dev = link->priv;
+ ray_dev_t *local = dev->priv;
+ int i;
+
+ DEBUG(1, "ray_release(0x%p)\n", link);
+
+ del_timer(&local->timer);
+ link->state &= ~DEV_CONFIG;
+
+ iounmap(local->sram);
+ iounmap(local->rmem);
+ iounmap(local->amem);
+ /* Do bother checking to see if these succeed or not */
+ i = pcmcia_release_window(link->win);
+ if ( i != CS_SUCCESS ) DEBUG(0,"ReleaseWindow(link->win) ret = %x\n",i);
+ i = pcmcia_release_window(local->amem_handle);
+ if ( i != CS_SUCCESS ) DEBUG(0,"ReleaseWindow(local->amem) ret = %x\n",i);
+ i = pcmcia_release_window(local->rmem_handle);
+ if ( i != CS_SUCCESS ) DEBUG(0,"ReleaseWindow(local->rmem) ret = %x\n",i);
+ i = pcmcia_release_configuration(link->handle);
+ if ( i != CS_SUCCESS ) DEBUG(0,"ReleaseConfiguration ret = %x\n",i);
+ i = pcmcia_release_irq(link->handle, &link->irq);
+ if ( i != CS_SUCCESS ) DEBUG(0,"ReleaseIRQ ret = %x\n",i);
+
+ DEBUG(2,"ray_release ending\n");
+}
+
+/*=============================================================================
+ The card status event handler. Mostly, this schedules other
+ stuff to run after an event is received. A CARD_REMOVAL event
+ also sets some flags to discourage the net drivers from trying
+ to talk to the card any more.
+
+ When a CARD_REMOVAL event is received, we immediately set a flag
+ to block future accesses to this device. All the functions that
+ actually access the device should check this flag to make sure
+ the card is still present.
+=============================================================================*/
+static int ray_event(event_t event, int priority,
+ event_callback_args_t *args)
+{
+ dev_link_t *link = args->client_data;
+ struct net_device *dev = link->priv;
+ ray_dev_t *local = (ray_dev_t *)dev->priv;
+ DEBUG(1, "ray_event(0x%06x)\n", event);
+
+ switch (event) {
+ case CS_EVENT_CARD_REMOVAL:
+ link->state &= ~DEV_PRESENT;
+ netif_device_detach(dev);
+ if (link->state & DEV_CONFIG) {
+ ray_release(link);
+ del_timer(&local->timer);
+ }
+ break;
+ case CS_EVENT_CARD_INSERTION:
+ link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
+ ray_config(link);
+ break;
+ case CS_EVENT_PM_SUSPEND:
+ link->state |= DEV_SUSPEND;
+ /* Fall through... */
+ case CS_EVENT_RESET_PHYSICAL:
+ if (link->state & DEV_CONFIG) {
+ if (link->open)
+ netif_device_detach(dev);
+
+ pcmcia_release_configuration(link->handle);
+ }
+ break;
+ case CS_EVENT_PM_RESUME:
+ link->state &= ~DEV_SUSPEND;
+ /* Fall through... */
+ case CS_EVENT_CARD_RESET:
+ if (link->state & DEV_CONFIG) {
+ pcmcia_request_configuration(link->handle, &link->conf);
+ if (link->open) {
+ ray_reset(dev);
+ netif_device_attach(dev);
+ }
+ }
+ break;
+ }
+ return 0;
+ DEBUG(2,"ray_event ending\n");
+} /* ray_event */
+/*===========================================================================*/
+int ray_dev_init(struct net_device *dev)
+{
+#ifdef RAY_IMMEDIATE_INIT
+ int i;
+#endif /* RAY_IMMEDIATE_INIT */
+ ray_dev_t *local = dev->priv;
+ dev_link_t *link = local->finder;
+
+ DEBUG(1,"ray_dev_init(dev=%p)\n",dev);
+ if (!(link->state & DEV_PRESENT)) {
+ DEBUG(2,"ray_dev_init - device not present\n");
+ return -1;
+ }
+#ifdef RAY_IMMEDIATE_INIT
+ /* Download startup parameters */
+ if ( (i = dl_startup_params(dev)) < 0)
+ {
+ printk(KERN_INFO "ray_dev_init dl_startup_params failed - "
+ "returns 0x%x\n",i);
+ return -1;
+ }
+#else /* RAY_IMMEDIATE_INIT */
+ /* Postpone the card init so that we can still configure the card,
+ * for example using the Wireless Extensions. The init will happen
+ * in ray_open() - Jean II */
+ DEBUG(1,"ray_dev_init: postponing card init to ray_open() ; Status = %d\n",
+ local->card_status);
+#endif /* RAY_IMMEDIATE_INIT */
+
+ /* copy mac and broadcast addresses to linux device */
+ memcpy(&dev->dev_addr, &local->sparm.b4.a_mac_addr, ADDRLEN);
+ memset(dev->broadcast, 0xff, ETH_ALEN);
+
+ DEBUG(2,"ray_dev_init ending\n");
+ return 0;
+}
+/*===========================================================================*/
+static int ray_dev_config(struct net_device *dev, struct ifmap *map)
+{
+ ray_dev_t *local = dev->priv;
+ dev_link_t *link = local->finder;
+ /* Dummy routine to satisfy device structure */
+ DEBUG(1,"ray_dev_config(dev=%p,ifmap=%p)\n",dev,map);
+ if (!(link->state & DEV_PRESENT)) {
+ DEBUG(2,"ray_dev_config - device not present\n");
+ return -1;
+ }
+
+ return 0;
+}
+/*===========================================================================*/
+static int ray_dev_start_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+ ray_dev_t *local = dev->priv;
+ dev_link_t *link = local->finder;
+ short length = skb->len;
+
+ if (!(link->state & DEV_PRESENT)) {
+ DEBUG(2,"ray_dev_start_xmit - device not present\n");
+ return -1;
+ }
+ DEBUG(3,"ray_dev_start_xmit(skb=%p, dev=%p)\n",skb,dev);
+ if (local->authentication_state == NEED_TO_AUTH) {
+ DEBUG(0,"ray_cs Sending authentication request.\n");
+ if (!build_auth_frame (local, local->auth_id, OPEN_AUTH_REQUEST)) {
+ local->authentication_state = AUTHENTICATED;
+ netif_stop_queue(dev);
+ return 1;
+ }
+ }
+
+ if (length < ETH_ZLEN)
+ {
+ skb = skb_padto(skb, ETH_ZLEN);
+ if (skb == NULL)
+ return 0;
+ length = ETH_ZLEN;
+ }
+ switch (ray_hw_xmit( skb->data, length, dev, DATA_TYPE)) {
+ case XMIT_NO_CCS:
+ case XMIT_NEED_AUTH:
+ netif_stop_queue(dev);
+ return 1;
+ case XMIT_NO_INTR:
+ case XMIT_MSG_BAD:
+ case XMIT_OK:
+ default:
+ dev->trans_start = jiffies;
+ dev_kfree_skb(skb);
+ return 0;
+ }
+ return 0;
+} /* ray_dev_start_xmit */
+/*===========================================================================*/
+static int ray_hw_xmit(unsigned char* data, int len, struct net_device* dev,
+ UCHAR msg_type)
+{
+ ray_dev_t *local = (ray_dev_t *)dev->priv;
+ struct ccs __iomem *pccs;
+ int ccsindex;
+ int offset;
+ struct tx_msg __iomem *ptx; /* Address of xmit buffer in PC space */
+ short int addr; /* Address of xmit buffer in card space */
+
+ DEBUG(3,"ray_hw_xmit(data=%p, len=%d, dev=%p)\n",data,len,dev);
+ if (len + TX_HEADER_LENGTH > TX_BUF_SIZE)
+ {
+ printk(KERN_INFO "ray_hw_xmit packet too large: %d bytes\n",len);
+ return XMIT_MSG_BAD;
+ }
+ switch (ccsindex = get_free_tx_ccs(local)) {
+ case ECCSBUSY:
+ DEBUG(2,"ray_hw_xmit tx_ccs table busy\n");
+ case ECCSFULL:
+ DEBUG(2,"ray_hw_xmit No free tx ccs\n");
+ case ECARDGONE:
+ netif_stop_queue(dev);
+ return XMIT_NO_CCS;
+ default:
+ break;
+ }
+ addr = TX_BUF_BASE + (ccsindex << 11);
+
+ if (msg_type == DATA_TYPE) {
+ local->stats.tx_bytes += len;
+ local->stats.tx_packets++;
+ }
+
+ ptx = local->sram + addr;
+
+ ray_build_header(local, ptx, msg_type, data);
+ if (translate) {
+ offset = translate_frame(local, ptx, data, len);
+ }
+ else { /* Encapsulate frame */
+ /* TBD TIB length will move address of ptx->var */
+ memcpy_toio(&ptx->var, data, len);
+ offset = 0;
+ }
+
+ /* fill in the CCS */
+ pccs = ccs_base(local) + ccsindex;
+ len += TX_HEADER_LENGTH + offset;
+ writeb(CCS_TX_REQUEST, &pccs->cmd);
+ writeb(addr >> 8, &pccs->var.tx_request.tx_data_ptr[0]);
+ writeb(local->tib_length, &pccs->var.tx_request.tx_data_ptr[1]);
+ writeb(len >> 8, &pccs->var.tx_request.tx_data_length[0]);
+ writeb(len & 0xff, &pccs->var.tx_request.tx_data_length[1]);
+/* TBD still need psm_cam? */
+ writeb(PSM_CAM, &pccs->var.tx_request.pow_sav_mode);
+ writeb(local->net_default_tx_rate, &pccs->var.tx_request.tx_rate);
+ writeb(0, &pccs->var.tx_request.antenna);
+ DEBUG(3,"ray_hw_xmit default_tx_rate = 0x%x\n",\
+ local->net_default_tx_rate);
+
+ /* Interrupt the firmware to process the command */
+ if (interrupt_ecf(local, ccsindex)) {
+ DEBUG(2,"ray_hw_xmit failed - ECF not ready for intr\n");
+/* TBD very inefficient to copy packet to buffer, and then not
+ send it, but the alternative is to queue the messages and that
+ won't be done for a while. Maybe set tbusy until a CCS is free?
+*/
+ writeb(CCS_BUFFER_FREE, &pccs->buffer_status);
+ return XMIT_NO_INTR;
+ }
+ return XMIT_OK;
+} /* end ray_hw_xmit */
+/*===========================================================================*/
+static int translate_frame(ray_dev_t *local, struct tx_msg __iomem *ptx, unsigned char *data,
+ int len)
+{
+ unsigned short int proto = ((struct ethhdr *)data)->h_proto;
+ if (ntohs(proto) >= 1536) { /* DIX II ethernet frame */
+ DEBUG(3,"ray_cs translate_frame DIX II\n");
+ /* Copy LLC header to card buffer */
+ memcpy_toio(&ptx->var, eth2_llc, sizeof(eth2_llc));
+ memcpy_toio( ((void __iomem *)&ptx->var) + sizeof(eth2_llc), (UCHAR *)&proto, 2);
+ if ((proto == 0xf380) || (proto == 0x3781)) {
+ /* This is the selective translation table, only 2 entries */
+ writeb(0xf8, &((struct snaphdr_t __iomem *)ptx->var)->org[3]);
+ }
+ /* Copy body of ethernet packet without ethernet header */
+ memcpy_toio((void __iomem *)&ptx->var + sizeof(struct snaphdr_t), \
+ data + ETH_HLEN, len - ETH_HLEN);
+ return (int) sizeof(struct snaphdr_t) - ETH_HLEN;
+ }
+ else { /* already 802 type, and proto is length */
+ DEBUG(3,"ray_cs translate_frame 802\n");
+ if (proto == 0xffff) { /* evil netware IPX 802.3 without LLC */
+ DEBUG(3,"ray_cs translate_frame evil IPX\n");
+ memcpy_toio(&ptx->var, data + ETH_HLEN, len - ETH_HLEN);
+ return 0 - ETH_HLEN;
+ }
+ memcpy_toio(&ptx->var, data + ETH_HLEN, len - ETH_HLEN);
+ return 0 - ETH_HLEN;
+ }
+ /* TBD do other frame types */
+} /* end translate_frame */
+/*===========================================================================*/
+static void ray_build_header(ray_dev_t *local, struct tx_msg __iomem *ptx, UCHAR msg_type,
+ unsigned char *data)
+{
+ writeb(PROTOCOL_VER | msg_type, &ptx->mac.frame_ctl_1);
+/*** IEEE 802.11 Address field assignments *************
+ TODS FROMDS addr_1 addr_2 addr_3 addr_4
+Adhoc 0 0 dest src (terminal) BSSID N/A
+AP to Terminal 0 1 dest AP(BSSID) source N/A
+Terminal to AP 1 0 AP(BSSID) src (terminal) dest N/A
+AP to AP 1 1 dest AP src AP dest source
+*******************************************************/
+ if (local->net_type == ADHOC) {
+ writeb(0, &ptx->mac.frame_ctl_2);
+ memcpy_toio(ptx->mac.addr_1, ((struct ethhdr *)data)->h_dest, 2 * ADDRLEN);
+ memcpy_toio(ptx->mac.addr_3, local->bss_id, ADDRLEN);
+ }
+ else /* infrastructure */
+ {
+ if (local->sparm.b4.a_acting_as_ap_status)
+ {
+ writeb(FC2_FROM_DS, &ptx->mac.frame_ctl_2);
+ memcpy_toio(ptx->mac.addr_1, ((struct ethhdr *)data)->h_dest, ADDRLEN);
+ memcpy_toio(ptx->mac.addr_2, local->bss_id, 6);
+ memcpy_toio(ptx->mac.addr_3, ((struct ethhdr *)data)->h_source, ADDRLEN);
+ }
+ else /* Terminal */
+ {
+ writeb(FC2_TO_DS, &ptx->mac.frame_ctl_2);
+ memcpy_toio(ptx->mac.addr_1, local->bss_id, ADDRLEN);
+ memcpy_toio(ptx->mac.addr_2, ((struct ethhdr *)data)->h_source, ADDRLEN);
+ memcpy_toio(ptx->mac.addr_3, ((struct ethhdr *)data)->h_dest, ADDRLEN);
+ }
+ }
+} /* end encapsulate_frame */
+
+
+/*===========================================================================*/
+
+static void netdev_get_drvinfo(struct net_device *dev,
+ struct ethtool_drvinfo *info)
+{
+ strcpy(info->driver, "ray_cs");
+}
+
+static struct ethtool_ops netdev_ethtool_ops = {
+ .get_drvinfo = netdev_get_drvinfo,
+};
+
+/*====================================================================*/
+
+static int ray_dev_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
+{
+ ray_dev_t *local = (ray_dev_t *)dev->priv;
+ dev_link_t *link = local->finder;
+ int err = 0;
+#if WIRELESS_EXT > 7
+ struct iwreq *wrq = (struct iwreq *) ifr;
+#endif /* WIRELESS_EXT > 7 */
+#ifdef WIRELESS_SPY
+ struct sockaddr address[IW_MAX_SPY];
+#endif /* WIRELESS_SPY */
+
+ if (!(link->state & DEV_PRESENT)) {
+ DEBUG(2,"ray_dev_ioctl - device not present\n");
+ return -1;
+ }
+ DEBUG(2,"ray_cs IOCTL dev=%p, ifr=%p, cmd = 0x%x\n",dev,ifr,cmd);
+ /* Validate the command */
+ switch (cmd)
+ {
+#if WIRELESS_EXT > 7
+ /* --------------- WIRELESS EXTENSIONS --------------- */
+ /* Get name */
+ case SIOCGIWNAME:
+ strcpy(wrq->u.name, "IEEE 802.11-FH");
+ break;
+
+ /* Get frequency/channel */
+ case SIOCGIWFREQ:
+ wrq->u.freq.m = local->sparm.b5.a_hop_pattern;
+ wrq->u.freq.e = 0;
+ break;
+
+ /* Set frequency/channel */
+ case SIOCSIWFREQ:
+ /* Reject if card is already initialised */
+ if(local->card_status != CARD_AWAITING_PARAM)
+ {
+ err = -EBUSY;
+ break;
+ }
+
+ /* Setting by channel number */
+ if ((wrq->u.freq.m > USA_HOP_MOD) || (wrq->u.freq.e > 0))
+ err = -EOPNOTSUPP;
+ else
+ local->sparm.b5.a_hop_pattern = wrq->u.freq.m;
+ break;
+
+ /* Get current network name (ESSID) */
+ case SIOCGIWESSID:
+ if (wrq->u.data.pointer)
+ {
+ char essid[IW_ESSID_MAX_SIZE + 1];
+ /* Get the essid that was set */
+ memcpy(essid, local->sparm.b5.a_current_ess_id,
+ IW_ESSID_MAX_SIZE);
+ essid[IW_ESSID_MAX_SIZE] = '\0';
+
+ /* Push it out ! */
+ wrq->u.data.length = strlen(essid) + 1;
+ wrq->u.data.flags = 1; /* active */
+ if (copy_to_user(wrq->u.data.pointer, essid, sizeof(essid)))
+ err = -EFAULT;
+ }
+ break;
+
+ /* Set desired network name (ESSID) */
+ case SIOCSIWESSID:
+ /* Reject if card is already initialised */
+ if(local->card_status != CARD_AWAITING_PARAM)
+ {
+ err = -EBUSY;
+ break;
+ }
+
+ if (wrq->u.data.pointer)
+ {
+ char card_essid[IW_ESSID_MAX_SIZE + 1];
+
+ /* Check if we asked for `any' */
+ if(wrq->u.data.flags == 0)
+ {
+ /* Corey : can you do that ? */
+ err = -EOPNOTSUPP;
+ }
+ else
+ {
+ /* Check the size of the string */
+ if(wrq->u.data.length >
+ IW_ESSID_MAX_SIZE + 1)
+ {
+ err = -E2BIG;
+ break;
+ }
+ if (copy_from_user(card_essid,
+ wrq->u.data.pointer,
+ wrq->u.data.length)) {
+ err = -EFAULT;
+ break;
+ }
+ card_essid[IW_ESSID_MAX_SIZE] = '\0';
+
+ /* Set the ESSID in the card */
+ memcpy(local->sparm.b5.a_current_ess_id, card_essid,
+ IW_ESSID_MAX_SIZE);
+ }
+ }
+ break;
+
+ /* Get current Access Point (BSSID in our case) */
+ case SIOCGIWAP:
+ memcpy(wrq->u.ap_addr.sa_data, local->bss_id, ETH_ALEN);
+ wrq->u.ap_addr.sa_family = ARPHRD_ETHER;
+ break;
+
+ /* Get the current bit-rate */
+ case SIOCGIWRATE:
+ if(local->net_default_tx_rate == 3)
+ wrq->u.bitrate.value = 2000000; /* Hum... */
+ else
+ wrq->u.bitrate.value = local->net_default_tx_rate * 500000;
+ wrq->u.bitrate.fixed = 0; /* We are in auto mode */
+ break;
+
+ /* Set the desired bit-rate */
+ case SIOCSIWRATE:
+ /* Check if rate is in range */
+ if((wrq->u.bitrate.value != 1000000) &&
+ (wrq->u.bitrate.value != 2000000))
+ {
+ err = -EINVAL;
+ break;
+ }
+ /* Hack for 1.5 Mb/s instead of 2 Mb/s */
+ if((local->fw_ver == 0x55) && /* Please check */
+ (wrq->u.bitrate.value == 2000000))
+ local->net_default_tx_rate = 3;
+ else
+ local->net_default_tx_rate = wrq->u.bitrate.value/500000;
+ break;
+
+ /* Get the current RTS threshold */
+ case SIOCGIWRTS:
+ wrq->u.rts.value = (local->sparm.b5.a_rts_threshold[0] << 8)
+ + local->sparm.b5.a_rts_threshold[1];
+#if WIRELESS_EXT > 8
+ wrq->u.rts.disabled = (wrq->u.rts.value == 32767);
+#endif /* WIRELESS_EXT > 8 */
+ wrq->u.rts.fixed = 1;
+ break;
+
+ /* Set the desired RTS threshold */
+ case SIOCSIWRTS:
+ {
+ int rthr = wrq->u.rts.value;
+
+ /* Reject if card is already initialised */
+ if(local->card_status != CARD_AWAITING_PARAM)
+ {
+ err = -EBUSY;
+ break;
+ }
+
+ /* if(wrq->u.rts.fixed == 0) we should complain */
+#if WIRELESS_EXT > 8
+ if(wrq->u.rts.disabled)
+ rthr = 32767;
+ else
+#endif /* WIRELESS_EXT > 8 */
+ if((rthr < 0) || (rthr > 2347)) /* What's the max packet size ??? */
+ {
+ err = -EINVAL;
+ break;
+ }
+ local->sparm.b5.a_rts_threshold[0] = (rthr >> 8) & 0xFF;
+ local->sparm.b5.a_rts_threshold[1] = rthr & 0xFF;
+ }
+ break;
+
+ /* Get the current fragmentation threshold */
+ case SIOCGIWFRAG:
+ wrq->u.frag.value = (local->sparm.b5.a_frag_threshold[0] << 8)
+ + local->sparm.b5.a_frag_threshold[1];
+#if WIRELESS_EXT > 8
+ wrq->u.frag.disabled = (wrq->u.frag.value == 32767);
+#endif /* WIRELESS_EXT > 8 */
+ wrq->u.frag.fixed = 1;
+ break;
+
+ /* Set the desired fragmentation threshold */
+ case SIOCSIWFRAG:
+ {
+ int fthr = wrq->u.frag.value;
+
+ /* Reject if card is already initialised */
+ if(local->card_status != CARD_AWAITING_PARAM)
+ {
+ err = -EBUSY;
+ break;
+ }
+
+ /* if(wrq->u.frag.fixed == 0) should complain */
+#if WIRELESS_EXT > 8
+ if(wrq->u.frag.disabled)
+ fthr = 32767;
+ else
+#endif /* WIRELESS_EXT > 8 */
+ if((fthr < 256) || (fthr > 2347)) /* To check out ! */
+ {
+ err = -EINVAL;
+ break;
+ }
+ local->sparm.b5.a_frag_threshold[0] = (fthr >> 8) & 0xFF;
+ local->sparm.b5.a_frag_threshold[1] = fthr & 0xFF;
+ }
+ break;
+
+#endif /* WIRELESS_EXT > 7 */
+#if WIRELESS_EXT > 8
+
+ /* Get the current mode of operation */
+ case SIOCGIWMODE:
+ if(local->sparm.b5.a_network_type)
+ wrq->u.mode = IW_MODE_INFRA;
+ else
+ wrq->u.mode = IW_MODE_ADHOC;
+ break;
+
+ /* Set the current mode of operation */
+ case SIOCSIWMODE:
+ {
+ char card_mode = 1;
+
+ /* Reject if card is already initialised */
+ if(local->card_status != CARD_AWAITING_PARAM)
+ {
+ err = -EBUSY;
+ break;
+ }
+
+ switch (wrq->u.mode)
+ {
+ case IW_MODE_ADHOC:
+ card_mode = 0;
+ // Fall through
+ case IW_MODE_INFRA:
+ local->sparm.b5.a_network_type = card_mode;
+ break;
+ default:
+ err = -EINVAL;
+ }
+ }
+ break;
+
+#endif /* WIRELESS_EXT > 8 */
+#if WIRELESS_EXT > 7
+ /* ------------------ IWSPY SUPPORT ------------------ */
+ /* Define the range (variations) of above parameters */
+ case SIOCGIWRANGE:
+ /* Basic checking... */
+ if(wrq->u.data.pointer != (caddr_t) 0)
+ {
+ struct iw_range range;
+ memset((char *) &range, 0, sizeof(struct iw_range));
+
+ /* Set the length (very important for backward compatibility) */
+ wrq->u.data.length = sizeof(struct iw_range);
+
+#if WIRELESS_EXT > 10
+ /* Set the Wireless Extension versions */
+ range.we_version_compiled = WIRELESS_EXT;
+ range.we_version_source = 9;
+#endif /* WIRELESS_EXT > 10 */
+
+ /* Set information in the range struct */
+ range.throughput = 1.1 * 1000 * 1000; /* Put the right number here */
+ range.num_channels = hop_pattern_length[(int)country];
+ range.num_frequency = 0;
+ range.max_qual.qual = 0;
+ range.max_qual.level = 255; /* What's the correct value ? */
+ range.max_qual.noise = 255; /* Idem */
+ range.num_bitrates = 2;
+ range.bitrate[0] = 1000000; /* 1 Mb/s */
+ range.bitrate[1] = 2000000; /* 2 Mb/s */
+
+ /* Copy structure to the user buffer */
+ if(copy_to_user(wrq->u.data.pointer, &range,
+ sizeof(struct iw_range)))
+ err = -EFAULT;
+ }
+ break;
+
+#ifdef WIRELESS_SPY
+ /* Set addresses to spy */
+ case SIOCSIWSPY:
+ /* Check the number of addresses */
+ if(wrq->u.data.length > IW_MAX_SPY)
+ {
+ err = -E2BIG;
+ break;
+ }
+ local->spy_number = wrq->u.data.length;
+
+ /* If there is some addresses to copy */
+ if(local->spy_number > 0)
+ {
+ int i;
+
+ /* Copy addresses to the driver */
+ if(copy_from_user(address, wrq->u.data.pointer,
+ sizeof(struct sockaddr) * local->spy_number))
+ {
+ err = -EFAULT;
+ break;
+ }
+
+ /* Copy addresses to the lp structure */
+ for(i = 0; i < local->spy_number; i++)
+ memcpy(local->spy_address[i], address[i].sa_data, ETH_ALEN);
+
+ /* Reset structure... */
+ memset(local->spy_stat, 0x00, sizeof(iw_qual) * IW_MAX_SPY);
+
+#ifdef DEBUG_IOCTL_INFO
+ printk(KERN_DEBUG "SetSpy - Set of new addresses is :\n");
+ for(i = 0; i < local->spy_number; i++)
+ printk(KERN_DEBUG "%02X:%02X:%02X:%02X:%02X:%02X\n",
+ local->spy_address[i][0],
+ local->spy_address[i][1],
+ local->spy_address[i][2],
+ local->spy_address[i][3],
+ local->spy_address[i][4],
+ local->spy_address[i][5]);
+#endif /* DEBUG_IOCTL_INFO */
+ }
+ break;
+
+ /* Get the spy list and spy stats */
+ case SIOCGIWSPY:
+ /* Set the number of addresses */
+ wrq->u.data.length = local->spy_number;
+
+ /* If the user want to have the addresses back... */
+ if((local->spy_number > 0) && (wrq->u.data.pointer != (caddr_t) 0))
+ {
+ int i;
+
+ /* Copy addresses from the lp structure */
+ for(i = 0; i < local->spy_number; i++)
+ {
+ memcpy(address[i].sa_data, local->spy_address[i], ETH_ALEN);
+ address[i].sa_family = ARPHRD_ETHER;
+ }
+
+ /* Copy addresses to the user buffer */
+ if(copy_to_user(wrq->u.data.pointer, address,
+ sizeof(struct sockaddr) * local->spy_number))
+ {
+ err = -EFAULT;
+ break;
+ }
+
+ /* Copy stats to the user buffer (just after) */
+ if(copy_to_user(wrq->u.data.pointer +
+ (sizeof(struct sockaddr) * local->spy_number),
+ local->spy_stat, sizeof(iw_qual) * local->spy_number))
+ {
+ err = -EFAULT;
+ break;
+ }
+
+ /* Reset updated flags */
+ for(i = 0; i < local->spy_number; i++)
+ local->spy_stat[i].updated = 0x0;
+ } /* if(pointer != NULL) */
+
+ break;
+#endif /* WIRELESS_SPY */
+
+ /* ------------------ PRIVATE IOCTL ------------------ */
+#ifndef SIOCIWFIRSTPRIV
+#define SIOCIWFIRSTPRIV SIOCDEVPRIVATE
+#endif /* SIOCIWFIRSTPRIV */
+#define SIOCSIPFRAMING SIOCIWFIRSTPRIV /* Set framing mode */
+#define SIOCGIPFRAMING SIOCIWFIRSTPRIV + 1 /* Get framing mode */
+#define SIOCGIPCOUNTRY SIOCIWFIRSTPRIV + 3 /* Get country code */
+ case SIOCSIPFRAMING:
+ if(!capable(CAP_NET_ADMIN)) /* For private IOCTLs, we need to check permissions */
+ {
+ err = -EPERM;
+ break;
+ }
+ translate = *(wrq->u.name); /* Set framing mode */
+ break;
+ case SIOCGIPFRAMING:
+ *(wrq->u.name) = translate;
+ break;
+ case SIOCGIPCOUNTRY:
+ *(wrq->u.name) = country;
+ break;
+ case SIOCGIWPRIV:
+ /* Export our "private" intercace */
+ if(wrq->u.data.pointer != (caddr_t) 0)
+ {
+ struct iw_priv_args priv[] =
+ { /* cmd, set_args, get_args, name */
+ { SIOCSIPFRAMING, IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1, 0, "set_framing" },
+ { SIOCGIPFRAMING, 0, IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1, "get_framing" },
+ { SIOCGIPCOUNTRY, 0, IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1, "get_country" },
+ };
+ /* Set the number of ioctl available */
+ wrq->u.data.length = 3;
+ /* Copy structure to the user buffer */
+ if(copy_to_user(wrq->u.data.pointer, (u_char *) priv,
+ sizeof(priv)))
+ err = -EFAULT;
+ }
+ break;
+#endif /* WIRELESS_EXT > 7 */
+
+
+ default:
+ DEBUG(0,"ray_dev_ioctl cmd = 0x%x\n", cmd);
+ err = -EOPNOTSUPP;
+ }
+ return err;
+} /* end ray_dev_ioctl */
+/*===========================================================================*/
+#if WIRELESS_EXT > 7 /* If wireless extension exist in the kernel */
+static iw_stats * ray_get_wireless_stats(struct net_device * dev)
+{
+ ray_dev_t * local = (ray_dev_t *) dev->priv;
+ dev_link_t *link = local->finder;
+ struct status __iomem *p = local->sram + STATUS_BASE;
+
+ if(local == (ray_dev_t *) NULL)
+ return (iw_stats *) NULL;
+
+ local->wstats.status = local->card_status;
+#ifdef WIRELESS_SPY
+ if((local->spy_number > 0) && (local->sparm.b5.a_network_type == 0))
+ {
+ /* Get it from the first node in spy list */
+ local->wstats.qual.qual = local->spy_stat[0].qual;
+ local->wstats.qual.level = local->spy_stat[0].level;
+ local->wstats.qual.noise = local->spy_stat[0].noise;
+ local->wstats.qual.updated = local->spy_stat[0].updated;
+ }
+#endif /* WIRELESS_SPY */
+
+ if((link->state & DEV_PRESENT)) {
+ local->wstats.qual.noise = readb(&p->rxnoise);
+ local->wstats.qual.updated |= 4;
+ }
+
+ return &local->wstats;
+} /* end ray_get_wireless_stats */
+#endif /* WIRELESS_EXT > 7 */
+/*===========================================================================*/
+static int ray_open(struct net_device *dev)
+{
+ dev_link_t *link;
+ ray_dev_t *local = (ray_dev_t *)dev->priv;
+
+ DEBUG(1, "ray_open('%s')\n", dev->name);
+
+ for (link = dev_list; link; link = link->next)
+ if (link->priv == dev) break;
+ if (!DEV_OK(link)) {
+ return -ENODEV;
+ }
+
+ if (link->open == 0) local->num_multi = 0;
+ link->open++;
+
+ /* If the card is not started, time to start it ! - Jean II */
+ if(local->card_status == CARD_AWAITING_PARAM) {
+ int i;
+
+ DEBUG(1,"ray_open: doing init now !\n");
+
+ /* Download startup parameters */
+ if ( (i = dl_startup_params(dev)) < 0)
+ {
+ printk(KERN_INFO "ray_dev_init dl_startup_params failed - "
+ "returns 0x%x\n",i);
+ return -1;
+ }
+ }
+
+ if (sniffer) netif_stop_queue(dev);
+ else netif_start_queue(dev);
+
+ DEBUG(2,"ray_open ending\n");
+ return 0;
+} /* end ray_open */
+/*===========================================================================*/
+static int ray_dev_close(struct net_device *dev)
+{
+ dev_link_t *link;
+
+ DEBUG(1, "ray_dev_close('%s')\n", dev->name);
+
+ for (link = dev_list; link; link = link->next)
+ if (link->priv == dev) break;
+ if (link == NULL)
+ return -ENODEV;
+
+ link->open--;
+ netif_stop_queue(dev);
+
+ /* In here, we should stop the hardware (stop card from beeing active)
+ * and set local->card_status to CARD_AWAITING_PARAM, so that while the
+ * card is closed we can chage its configuration.
+ * Probably also need a COR reset to get sane state - Jean II */
+
+ return 0;
+} /* end ray_dev_close */
+/*===========================================================================*/
+static void ray_reset(struct net_device *dev) {
+ DEBUG(1,"ray_reset entered\n");
+ return;
+}
+/*===========================================================================*/
+/* Cause a firmware interrupt if it is ready for one */
+/* Return nonzero if not ready */
+static int interrupt_ecf(ray_dev_t *local, int ccs)
+{
+ int i = 50;
+ dev_link_t *link = local->finder;
+
+ if (!(link->state & DEV_PRESENT)) {
+ DEBUG(2,"ray_cs interrupt_ecf - device not present\n");
+ return -1;
+ }
+ DEBUG(2,"interrupt_ecf(local=%p, ccs = 0x%x\n",local,ccs);
+
+ while ( i &&
+ (readb(local->amem + CIS_OFFSET + ECF_INTR_OFFSET) & ECF_INTR_SET))
+ i--;
+ if (i == 0) {
+ DEBUG(2,"ray_cs interrupt_ecf card not ready for interrupt\n");
+ return -1;
+ }
+ /* Fill the mailbox, then kick the card */
+ writeb(ccs, local->sram + SCB_BASE);
+ writeb(ECF_INTR_SET, local->amem + CIS_OFFSET + ECF_INTR_OFFSET);
+ return 0;
+} /* interrupt_ecf */
+/*===========================================================================*/
+/* Get next free transmit CCS */
+/* Return - index of current tx ccs */
+static int get_free_tx_ccs(ray_dev_t *local)
+{
+ int i;
+ struct ccs __iomem *pccs = ccs_base(local);
+ dev_link_t *link = local->finder;
+
+ if (!(link->state & DEV_PRESENT)) {
+ DEBUG(2,"ray_cs get_free_tx_ccs - device not present\n");
+ return ECARDGONE;
+ }
+
+ if (test_and_set_bit(0,&local->tx_ccs_lock)) {
+ DEBUG(1,"ray_cs tx_ccs_lock busy\n");
+ return ECCSBUSY;
+ }
+
+ for (i=0; i < NUMBER_OF_TX_CCS; i++) {
+ if (readb(&(pccs+i)->buffer_status) == CCS_BUFFER_FREE) {
+ writeb(CCS_BUFFER_BUSY, &(pccs+i)->buffer_status);
+ writeb(CCS_END_LIST, &(pccs+i)->link);
+ local->tx_ccs_lock = 0;
+ return i;
+ }
+ }
+ local->tx_ccs_lock = 0;
+ DEBUG(2,"ray_cs ERROR no free tx CCS for raylink card\n");
+ return ECCSFULL;
+} /* get_free_tx_ccs */
+/*===========================================================================*/
+/* Get next free CCS */
+/* Return - index of current ccs */
+static int get_free_ccs(ray_dev_t *local)
+{
+ int i;
+ struct ccs __iomem *pccs = ccs_base(local);
+ dev_link_t *link = local->finder;
+
+ if (!(link->state & DEV_PRESENT)) {
+ DEBUG(2,"ray_cs get_free_ccs - device not present\n");
+ return ECARDGONE;
+ }
+ if (test_and_set_bit(0,&local->ccs_lock)) {
+ DEBUG(1,"ray_cs ccs_lock busy\n");
+ return ECCSBUSY;
+ }
+
+ for (i = NUMBER_OF_TX_CCS; i < NUMBER_OF_CCS; i++) {
+ if (readb(&(pccs+i)->buffer_status) == CCS_BUFFER_FREE) {
+ writeb(CCS_BUFFER_BUSY, &(pccs+i)->buffer_status);
+ writeb(CCS_END_LIST, &(pccs+i)->link);
+ local->ccs_lock = 0;
+ return i;
+ }
+ }
+ local->ccs_lock = 0;
+ DEBUG(1,"ray_cs ERROR no free CCS for raylink card\n");
+ return ECCSFULL;
+} /* get_free_ccs */
+/*===========================================================================*/
+static void authenticate_timeout(u_long data)
+{
+ ray_dev_t *local = (ray_dev_t *)data;
+ del_timer(&local->timer);
+ printk(KERN_INFO "ray_cs Authentication with access point failed"
+ " - timeout\n");
+ join_net((u_long)local);
+}
+/*===========================================================================*/
+static int asc_to_int(char a)
+{
+ if (a < '0') return -1;
+ if (a <= '9') return (a - '0');
+ if (a < 'A') return -1;
+ if (a <= 'F') return (10 + a - 'A');
+ if (a < 'a') return -1;
+ if (a <= 'f') return (10 + a - 'a');
+ return -1;
+}
+/*===========================================================================*/
+static int parse_addr(char *in_str, UCHAR *out)
+{
+ int len;
+ int i,j,k;
+ int status;
+
+ if (in_str == NULL) return 0;
+ if ((len = strlen(in_str)) < 2) return 0;
+ memset(out, 0, ADDRLEN);
+
+ status = 1;
+ j = len - 1;
+ if (j > 12) j = 12;
+ i = 5;
+
+ while (j > 0)
+ {
+ if ((k = asc_to_int(in_str[j--])) != -1) out[i] = k;
+ else return 0;
+
+ if (j == 0) break;
+ if ((k = asc_to_int(in_str[j--])) != -1) out[i] += k << 4;
+ else return 0;
+ if (!i--) break;
+ }
+ return status;
+}
+/*===========================================================================*/
+static struct net_device_stats *ray_get_stats(struct net_device *dev)
+{
+ ray_dev_t *local = (ray_dev_t *)dev->priv;
+ dev_link_t *link = local->finder;
+ struct status __iomem *p = local->sram + STATUS_BASE;
+ if (!(link->state & DEV_PRESENT)) {
+ DEBUG(2,"ray_cs net_device_stats - device not present\n");
+ return &local->stats;
+ }
+ if (readb(&p->mrx_overflow_for_host))
+ {
+ local->stats.rx_over_errors += ntohs(readb(&p->mrx_overflow));
+ writeb(0,&p->mrx_overflow);
+ writeb(0,&p->mrx_overflow_for_host);
+ }
+ if (readb(&p->mrx_checksum_error_for_host))
+ {
+ local->stats.rx_crc_errors += ntohs(readb(&p->mrx_checksum_error));
+ writeb(0,&p->mrx_checksum_error);
+ writeb(0,&p->mrx_checksum_error_for_host);
+ }
+ if (readb(&p->rx_hec_error_for_host))
+ {
+ local->stats.rx_frame_errors += ntohs(readb(&p->rx_hec_error));
+ writeb(0,&p->rx_hec_error);
+ writeb(0,&p->rx_hec_error_for_host);
+ }
+ return &local->stats;
+}
+/*===========================================================================*/
+static void ray_update_parm(struct net_device *dev, UCHAR objid, UCHAR *value, int len)
+{
+ ray_dev_t *local = (ray_dev_t *)dev->priv;
+ dev_link_t *link = local->finder;
+ int ccsindex;
+ int i;
+ struct ccs __iomem *pccs;
+
+ if (!(link->state & DEV_PRESENT)) {
+ DEBUG(2,"ray_update_parm - device not present\n");
+ return;
+ }
+
+ if ((ccsindex = get_free_ccs(local)) < 0)
+ {
+ DEBUG(0,"ray_update_parm - No free ccs\n");
+ return;
+ }
+ pccs = ccs_base(local) + ccsindex;
+ writeb(CCS_UPDATE_PARAMS, &pccs->cmd);
+ writeb(objid, &pccs->var.update_param.object_id);
+ writeb(1, &pccs->var.update_param.number_objects);
+ writeb(0, &pccs->var.update_param.failure_cause);
+ for (i=0; i<len; i++) {
+ writeb(value[i], local->sram + HOST_TO_ECF_BASE);
+ }
+ /* Interrupt the firmware to process the command */
+ if (interrupt_ecf(local, ccsindex)) {
+ DEBUG(0,"ray_cs associate failed - ECF not ready for intr\n");
+ writeb(CCS_BUFFER_FREE, &(pccs++)->buffer_status);
+ }
+}
+/*===========================================================================*/
+static void ray_update_multi_list(struct net_device *dev, int all)
+{
+ struct dev_mc_list *dmi, **dmip;
+ int ccsindex;
+ struct ccs __iomem *pccs;
+ int i = 0;
+ ray_dev_t *local = (ray_dev_t *)dev->priv;
+ dev_link_t *link = local->finder;
+ void __iomem *p = local->sram + HOST_TO_ECF_BASE;
+
+ if (!(link->state & DEV_PRESENT)) {
+ DEBUG(2,"ray_update_multi_list - device not present\n");
+ return;
+ }
+ else
+ DEBUG(2,"ray_update_multi_list(%p)\n",dev);
+ if ((ccsindex = get_free_ccs(local)) < 0)
+ {
+ DEBUG(1,"ray_update_multi - No free ccs\n");
+ return;
+ }
+ pccs = ccs_base(local) + ccsindex;
+ writeb(CCS_UPDATE_MULTICAST_LIST, &pccs->cmd);
+
+ if (all) {
+ writeb(0xff, &pccs->var);
+ local->num_multi = 0xff;
+ }
+ else {
+ /* Copy the kernel's list of MC addresses to card */
+ for (dmip=&dev->mc_list; (dmi=*dmip)!=NULL; dmip=&dmi->next) {
+ memcpy_toio(p, dmi->dmi_addr, ETH_ALEN);
+ DEBUG(1,"ray_update_multi add addr %02x%02x%02x%02x%02x%02x\n",dmi->dmi_addr[0],dmi->dmi_addr[1],dmi->dmi_addr[2],dmi->dmi_addr[3],dmi->dmi_addr[4],dmi->dmi_addr[5]);
+ p += ETH_ALEN;
+ i++;
+ }
+ if (i > 256/ADDRLEN) i = 256/ADDRLEN;
+ writeb((UCHAR)i, &pccs->var);
+ DEBUG(1,"ray_cs update_multi %d addresses in list\n", i);
+ /* Interrupt the firmware to process the command */
+ local->num_multi = i;
+ }
+ if (interrupt_ecf(local, ccsindex)) {
+ DEBUG(1,"ray_cs update_multi failed - ECF not ready for intr\n");
+ writeb(CCS_BUFFER_FREE, &(pccs++)->buffer_status);
+ }
+} /* end ray_update_multi_list */
+/*===========================================================================*/
+static void set_multicast_list(struct net_device *dev)
+{
+ ray_dev_t *local = (ray_dev_t *)dev->priv;
+ UCHAR promisc;
+
+ DEBUG(2,"ray_cs set_multicast_list(%p)\n",dev);
+
+ if (dev->flags & IFF_PROMISC)
+ {
+ if (local->sparm.b5.a_promiscuous_mode == 0) {
+ DEBUG(1,"ray_cs set_multicast_list promisc on\n");
+ local->sparm.b5.a_promiscuous_mode = 1;
+ promisc = 1;
+ ray_update_parm(dev, OBJID_promiscuous_mode, \
+ &promisc, sizeof(promisc));
+ }
+ }
+ else {
+ if (local->sparm.b5.a_promiscuous_mode == 1) {
+ DEBUG(1,"ray_cs set_multicast_list promisc off\n");
+ local->sparm.b5.a_promiscuous_mode = 0;
+ promisc = 0;
+ ray_update_parm(dev, OBJID_promiscuous_mode, \
+ &promisc, sizeof(promisc));
+ }
+ }
+
+ if (dev->flags & IFF_ALLMULTI) ray_update_multi_list(dev, 1);
+ else
+ {
+ if (local->num_multi != dev->mc_count) ray_update_multi_list(dev, 0);
+ }
+} /* end set_multicast_list */
+/*=============================================================================
+ * All routines below here are run at interrupt time.
+=============================================================================*/
+static irqreturn_t ray_interrupt(int irq, void *dev_id, struct pt_regs * regs)
+{
+ struct net_device *dev = (struct net_device *)dev_id;
+ dev_link_t *link;
+ ray_dev_t *local;
+ struct ccs __iomem *pccs;
+ struct rcs __iomem *prcs;
+ UCHAR rcsindex;
+ UCHAR tmp;
+ UCHAR cmd;
+ UCHAR status;
+
+ if (dev == NULL) /* Note that we want interrupts with dev->start == 0 */
+ return IRQ_NONE;
+
+ DEBUG(4,"ray_cs: interrupt for *dev=%p\n",dev);
+
+ local = (ray_dev_t *)dev->priv;
+ link = (dev_link_t *)local->finder;
+ if ( ! (link->state & DEV_PRESENT) || link->state & DEV_SUSPEND ) {
+ DEBUG(2,"ray_cs interrupt from device not present or suspended.\n");
+ return IRQ_NONE;
+ }
+ rcsindex = readb(&((struct scb __iomem *)(local->sram))->rcs_index);
+
+ if (rcsindex >= (NUMBER_OF_CCS + NUMBER_OF_RCS))
+ {
+ DEBUG(1,"ray_cs interrupt bad rcsindex = 0x%x\n",rcsindex);
+ clear_interrupt(local);
+ return IRQ_HANDLED;
+ }
+ if (rcsindex < NUMBER_OF_CCS) /* If it's a returned CCS */
+ {
+ pccs = ccs_base(local) + rcsindex;
+ cmd = readb(&pccs->cmd);
+ status = readb(&pccs->buffer_status);
+ switch (cmd)
+ {
+ case CCS_DOWNLOAD_STARTUP_PARAMS: /* Happens in firmware someday */
+ del_timer(&local->timer);
+ if (status == CCS_COMMAND_COMPLETE) {
+ DEBUG(1,"ray_cs interrupt download_startup_parameters OK\n");
+ }
+ else {
+ DEBUG(1,"ray_cs interrupt download_startup_parameters fail\n");
+ }
+ break;
+ case CCS_UPDATE_PARAMS:
+ DEBUG(1,"ray_cs interrupt update params done\n");
+ if (status != CCS_COMMAND_COMPLETE) {
+ tmp = readb(&pccs->var.update_param.failure_cause);
+ DEBUG(0,"ray_cs interrupt update params failed - reason %d\n",tmp);
+ }
+ break;
+ case CCS_REPORT_PARAMS:
+ DEBUG(1,"ray_cs interrupt report params done\n");
+ break;
+ case CCS_UPDATE_MULTICAST_LIST: /* Note that this CCS isn't returned */
+ DEBUG(1,"ray_cs interrupt CCS Update Multicast List done\n");
+ break;
+ case CCS_UPDATE_POWER_SAVINGS_MODE:
+ DEBUG(1,"ray_cs interrupt update power save mode done\n");
+ break;
+ case CCS_START_NETWORK:
+ case CCS_JOIN_NETWORK:
+ if (status == CCS_COMMAND_COMPLETE) {
+ if (readb(&pccs->var.start_network.net_initiated) == 1) {
+ DEBUG(0,"ray_cs interrupt network \"%s\" started\n",\
+ local->sparm.b4.a_current_ess_id);
+ }
+ else {
+ DEBUG(0,"ray_cs interrupt network \"%s\" joined\n",\
+ local->sparm.b4.a_current_ess_id);
+ }
+ memcpy_fromio(&local->bss_id,pccs->var.start_network.bssid,ADDRLEN);
+
+ if (local->fw_ver == 0x55) local->net_default_tx_rate = 3;
+ else local->net_default_tx_rate =
+ readb(&pccs->var.start_network.net_default_tx_rate);
+ local->encryption = readb(&pccs->var.start_network.encryption);
+ if (!sniffer && (local->net_type == INFRA)
+ && !(local->sparm.b4.a_acting_as_ap_status)) {
+ authenticate(local);
+ }
+ local->card_status = CARD_ACQ_COMPLETE;
+ }
+ else {
+ local->card_status = CARD_ACQ_FAILED;
+
+ del_timer(&local->timer);
+ local->timer.expires = jiffies + HZ*5;
+ local->timer.data = (long)local;
+ if (status == CCS_START_NETWORK) {
+ DEBUG(0,"ray_cs interrupt network \"%s\" start failed\n",\
+ local->sparm.b4.a_current_ess_id);
+ local->timer.function = &start_net;
+ }
+ else {
+ DEBUG(0,"ray_cs interrupt network \"%s\" join failed\n",\
+ local->sparm.b4.a_current_ess_id);
+ local->timer.function = &join_net;
+ }
+ add_timer(&local->timer);
+ }
+ break;
+ case CCS_START_ASSOCIATION:
+ if (status == CCS_COMMAND_COMPLETE) {
+ local->card_status = CARD_ASSOC_COMPLETE;
+ DEBUG(0,"ray_cs association successful\n");
+ }
+ else
+ {
+ DEBUG(0,"ray_cs association failed,\n");
+ local->card_status = CARD_ASSOC_FAILED;
+ join_net((u_long)local);
+ }
+ break;
+ case CCS_TX_REQUEST:
+ if (status == CCS_COMMAND_COMPLETE) {
+ DEBUG(3,"ray_cs interrupt tx request complete\n");
+ }
+ else {
+ DEBUG(1,"ray_cs interrupt tx request failed\n");
+ }
+ if (!sniffer) netif_start_queue(dev);
+ netif_wake_queue(dev);
+ break;
+ case CCS_TEST_MEMORY:
+ DEBUG(1,"ray_cs interrupt mem test done\n");
+ break;
+ case CCS_SHUTDOWN:
+ DEBUG(1,"ray_cs interrupt Unexpected CCS returned - Shutdown\n");
+ break;
+ case CCS_DUMP_MEMORY:
+ DEBUG(1,"ray_cs interrupt dump memory done\n");
+ break;
+ case CCS_START_TIMER:
+ DEBUG(2,"ray_cs interrupt DING - raylink timer expired\n");
+ break;
+ default:
+ DEBUG(1,"ray_cs interrupt Unexpected CCS 0x%x returned 0x%x\n",\
+ rcsindex, cmd);
+ }
+ writeb(CCS_BUFFER_FREE, &pccs->buffer_status);
+ }
+ else /* It's an RCS */
+ {
+ prcs = rcs_base(local) + rcsindex;
+
+ switch (readb(&prcs->interrupt_id))
+ {
+ case PROCESS_RX_PACKET:
+ ray_rx(dev, local, prcs);
+ break;
+ case REJOIN_NET_COMPLETE:
+ DEBUG(1,"ray_cs interrupt rejoin net complete\n");
+ local->card_status = CARD_ACQ_COMPLETE;
+ /* do we need to clear tx buffers CCS's? */
+ if (local->sparm.b4.a_network_type == ADHOC) {
+ if (!sniffer) netif_start_queue(dev);
+ }
+ else {
+ memcpy_fromio(&local->bss_id, prcs->var.rejoin_net_complete.bssid, ADDRLEN);
+ DEBUG(1,"ray_cs new BSSID = %02x%02x%02x%02x%02x%02x\n",\
+ local->bss_id[0], local->bss_id[1], local->bss_id[2],\
+ local->bss_id[3], local->bss_id[4], local->bss_id[5]);
+ if (!sniffer) authenticate(local);
+ }
+ break;
+ case ROAMING_INITIATED:
+ DEBUG(1,"ray_cs interrupt roaming initiated\n");
+ netif_stop_queue(dev);
+ local->card_status = CARD_DOING_ACQ;
+ break;
+ case JAPAN_CALL_SIGN_RXD:
+ DEBUG(1,"ray_cs interrupt japan call sign rx\n");
+ break;
+ default:
+ DEBUG(1,"ray_cs Unexpected interrupt for RCS 0x%x cmd = 0x%x\n",\
+ rcsindex, (unsigned int) readb(&prcs->interrupt_id));
+ break;
+ }
+ writeb(CCS_BUFFER_FREE, &prcs->buffer_status);
+ }
+ clear_interrupt(local);
+ return IRQ_HANDLED;
+} /* ray_interrupt */
+/*===========================================================================*/
+static void ray_rx(struct net_device *dev, ray_dev_t *local, struct rcs __iomem *prcs)
+{
+ int rx_len;
+ unsigned int pkt_addr;
+ void __iomem *pmsg;
+ DEBUG(4,"ray_rx process rx packet\n");
+
+ /* Calculate address of packet within Rx buffer */
+ pkt_addr = ((readb(&prcs->var.rx_packet.rx_data_ptr[0]) << 8)
+ + readb(&prcs->var.rx_packet.rx_data_ptr[1])) & RX_BUFF_END;
+ /* Length of first packet fragment */
+ rx_len = (readb(&prcs->var.rx_packet.rx_data_length[0]) << 8)
+ + readb(&prcs->var.rx_packet.rx_data_length[1]);
+
+ local->last_rsl = readb(&prcs->var.rx_packet.rx_sig_lev);
+ pmsg = local->rmem + pkt_addr;
+ switch(readb(pmsg))
+ {
+ case DATA_TYPE:
+ DEBUG(4,"ray_rx data type\n");
+ rx_data(dev, prcs, pkt_addr, rx_len);
+ break;
+ case AUTHENTIC_TYPE:
+ DEBUG(4,"ray_rx authentic type\n");
+ if (sniffer) rx_data(dev, prcs, pkt_addr, rx_len);
+ else rx_authenticate(local, prcs, pkt_addr, rx_len);
+ break;
+ case DEAUTHENTIC_TYPE:
+ DEBUG(4,"ray_rx deauth type\n");
+ if (sniffer) rx_data(dev, prcs, pkt_addr, rx_len);
+ else rx_deauthenticate(local, prcs, pkt_addr, rx_len);
+ break;
+ case NULL_MSG_TYPE:
+ DEBUG(3,"ray_cs rx NULL msg\n");
+ break;
+ case BEACON_TYPE:
+ DEBUG(4,"ray_rx beacon type\n");
+ if (sniffer) rx_data(dev, prcs, pkt_addr, rx_len);
+
+ copy_from_rx_buff(local, (UCHAR *)&local->last_bcn, pkt_addr,
+ rx_len < sizeof(struct beacon_rx) ?
+ rx_len : sizeof(struct beacon_rx));
+
+ local->beacon_rxed = 1;
+ /* Get the statistics so the card counters never overflow */
+ ray_get_stats(dev);
+ break;
+ default:
+ DEBUG(0,"ray_cs unknown pkt type %2x\n", (unsigned int) readb(pmsg));
+ break;
+ }
+
+} /* end ray_rx */
+/*===========================================================================*/
+static void rx_data(struct net_device *dev, struct rcs __iomem *prcs, unsigned int pkt_addr,
+ int rx_len)
+{
+ struct sk_buff *skb = NULL;
+ struct rcs __iomem *prcslink = prcs;
+ ray_dev_t *local = dev->priv;
+ UCHAR *rx_ptr;
+ int total_len;
+ int tmp;
+#ifdef WIRELESS_SPY
+ int siglev = local->last_rsl;
+ u_char linksrcaddr[ETH_ALEN]; /* Other end of the wireless link */
+#endif
+
+ if (!sniffer) {
+ if (translate) {
+/* TBD length needs fixing for translated header */
+ if (rx_len < (ETH_HLEN + RX_MAC_HEADER_LENGTH) ||
+ rx_len > (dev->mtu + RX_MAC_HEADER_LENGTH + ETH_HLEN + FCS_LEN))
+ {
+ DEBUG(0,"ray_cs invalid packet length %d received \n",rx_len);
+ return;
+ }
+ }
+ else /* encapsulated ethernet */ {
+ if (rx_len < (ETH_HLEN + RX_MAC_HEADER_LENGTH) ||
+ rx_len > (dev->mtu + RX_MAC_HEADER_LENGTH + ETH_HLEN + FCS_LEN))
+ {
+ DEBUG(0,"ray_cs invalid packet length %d received \n",rx_len);
+ return;
+ }
+ }
+ }
+ DEBUG(4,"ray_cs rx_data packet\n");
+ /* If fragmented packet, verify sizes of fragments add up */
+ if (readb(&prcs->var.rx_packet.next_frag_rcs_index) != 0xFF) {
+ DEBUG(1,"ray_cs rx'ed fragment\n");
+ tmp = (readb(&prcs->var.rx_packet.totalpacketlength[0]) << 8)
+ + readb(&prcs->var.rx_packet.totalpacketlength[1]);
+ total_len = tmp;
+ prcslink = prcs;
+ do {
+ tmp -= (readb(&prcslink->var.rx_packet.rx_data_length[0]) << 8)
+ + readb(&prcslink->var.rx_packet.rx_data_length[1]);
+ if (readb(&prcslink->var.rx_packet.next_frag_rcs_index) == 0xFF
+ || tmp < 0) break;
+ prcslink = rcs_base(local)
+ + readb(&prcslink->link_field);
+ } while (1);
+
+ if (tmp < 0)
+ {
+ DEBUG(0,"ray_cs rx_data fragment lengths don't add up\n");
+ local->stats.rx_dropped++;
+ release_frag_chain(local, prcs);
+ return;
+ }
+ }
+ else { /* Single unfragmented packet */
+ total_len = rx_len;
+ }
+
+ skb = dev_alloc_skb( total_len+5 );
+ if (skb == NULL)
+ {
+ DEBUG(0,"ray_cs rx_data could not allocate skb\n");
+ local->stats.rx_dropped++;
+ if (readb(&prcs->var.rx_packet.next_frag_rcs_index) != 0xFF)
+ release_frag_chain(local, prcs);
+ return;
+ }
+ skb_reserve( skb, 2); /* Align IP on 16 byte (TBD check this)*/
+ skb->dev = dev;
+
+ DEBUG(4,"ray_cs rx_data total_len = %x, rx_len = %x\n",total_len,rx_len);
+
+/************************/
+ /* Reserve enough room for the whole damn packet. */
+ rx_ptr = skb_put( skb, total_len);
+ /* Copy the whole packet to sk_buff */
+ rx_ptr += copy_from_rx_buff(local, rx_ptr, pkt_addr & RX_BUFF_END, rx_len);
+ /* Get source address */
+#ifdef WIRELESS_SPY
+ memcpy(linksrcaddr, ((struct mac_header *)skb->data)->addr_2, ETH_ALEN);
+#endif
+ /* Now, deal with encapsulation/translation/sniffer */
+ if (!sniffer) {
+ if (!translate) {
+ /* Encapsulated ethernet, so just lop off 802.11 MAC header */
+/* TBD reserve skb_reserve( skb, RX_MAC_HEADER_LENGTH); */
+ skb_pull( skb, RX_MAC_HEADER_LENGTH);
+ }
+ else {
+ /* Do translation */
+ untranslate(local, skb, total_len);
+ }
+ }
+ else
+ { /* sniffer mode, so just pass whole packet */ };
+
+/************************/
+ /* Now pick up the rest of the fragments if any */
+ tmp = 17;
+ if (readb(&prcs->var.rx_packet.next_frag_rcs_index) != 0xFF) {
+ prcslink = prcs;
+ DEBUG(1,"ray_cs rx_data in fragment loop\n");
+ do {
+ prcslink = rcs_base(local)
+ + readb(&prcslink->var.rx_packet.next_frag_rcs_index);
+ rx_len = (( readb(&prcslink->var.rx_packet.rx_data_length[0]) << 8)
+ + readb(&prcslink->var.rx_packet.rx_data_length[1]))
+ & RX_BUFF_END;
+ pkt_addr = (( readb(&prcslink->var.rx_packet.rx_data_ptr[0]) << 8)
+ + readb(&prcslink->var.rx_packet.rx_data_ptr[1]))
+ & RX_BUFF_END;
+
+ rx_ptr += copy_from_rx_buff(local, rx_ptr, pkt_addr, rx_len);
+
+ } while (tmp-- &&
+ readb(&prcslink->var.rx_packet.next_frag_rcs_index) != 0xFF);
+ release_frag_chain(local, prcs);
+ }
+
+ skb->protocol = eth_type_trans(skb,dev);
+ netif_rx(skb);
+ dev->last_rx = jiffies;
+ local->stats.rx_packets++;
+ local->stats.rx_bytes += total_len;
+
+ /* Gather signal strength per address */
+#ifdef WIRELESS_SPY
+ /* For the Access Point or the node having started the ad-hoc net
+ * note : ad-hoc work only in some specific configurations, but we
+ * kludge in ray_get_wireless_stats... */
+ if(!memcmp(linksrcaddr, local->bss_id, ETH_ALEN))
+ {
+ /* Update statistics */
+ /*local->wstats.qual.qual = none ? */
+ local->wstats.qual.level = siglev;
+ /*local->wstats.qual.noise = none ? */
+ local->wstats.qual.updated = 0x2;
+ }
+ /* Now, for the addresses in the spy list */
+ {
+ int i;
+ /* Look all addresses */
+ for(i = 0; i < local->spy_number; i++)
+ /* If match */
+ if(!memcmp(linksrcaddr, local->spy_address[i], ETH_ALEN))
+ {
+ /* Update statistics */
+ /*local->spy_stat[i].qual = none ? */
+ local->spy_stat[i].level = siglev;
+ /*local->spy_stat[i].noise = none ? */
+ local->spy_stat[i].updated = 0x2;
+ }
+ }
+#endif /* WIRELESS_SPY */
+} /* end rx_data */
+/*===========================================================================*/
+static void untranslate(ray_dev_t *local, struct sk_buff *skb, int len)
+{
+ snaphdr_t *psnap = (snaphdr_t *)(skb->data + RX_MAC_HEADER_LENGTH);
+ struct mac_header *pmac = (struct mac_header *)skb->data;
+ unsigned short type = *(unsigned short *)psnap->ethertype;
+ unsigned int xsap = *(unsigned int *)psnap & 0x00ffffff;
+ unsigned int org = (*(unsigned int *)psnap->org) & 0x00ffffff;
+ int delta;
+ struct ethhdr *peth;
+ UCHAR srcaddr[ADDRLEN];
+ UCHAR destaddr[ADDRLEN];
+
+ if (pmac->frame_ctl_2 & FC2_FROM_DS) {
+ if (pmac->frame_ctl_2 & FC2_TO_DS) { /* AP to AP */
+ memcpy(destaddr, pmac->addr_3, ADDRLEN);
+ memcpy(srcaddr, ((unsigned char *)pmac->addr_3) + ADDRLEN, ADDRLEN);
+ } else { /* AP to terminal */
+ memcpy(destaddr, pmac->addr_1, ADDRLEN);
+ memcpy(srcaddr, pmac->addr_3, ADDRLEN);
+ }
+ } else { /* Terminal to AP */
+ if (pmac->frame_ctl_2 & FC2_TO_DS) {
+ memcpy(destaddr, pmac->addr_3, ADDRLEN);
+ memcpy(srcaddr, pmac->addr_2, ADDRLEN);
+ } else { /* Adhoc */
+ memcpy(destaddr, pmac->addr_1, ADDRLEN);
+ memcpy(srcaddr, pmac->addr_2, ADDRLEN);
+ }
+ }
+
+#ifdef PCMCIA_DEBUG
+ if (pc_debug > 3) {
+ int i;
+ printk(KERN_DEBUG "skb->data before untranslate");
+ for (i=0;i<64;i++)
+ printk("%02x ",skb->data[i]);
+ printk("\n" KERN_DEBUG "type = %08x, xsap = %08x, org = %08x\n",
+ type,xsap,org);
+ printk(KERN_DEBUG "untranslate skb->data = %p\n",skb->data);
+ }
+#endif
+
+ if ( xsap != SNAP_ID) {
+ /* not a snap type so leave it alone */
+ DEBUG(3,"ray_cs untranslate NOT SNAP %x\n", *(unsigned int *)psnap & 0x00ffffff);
+
+ delta = RX_MAC_HEADER_LENGTH - ETH_HLEN;
+ peth = (struct ethhdr *)(skb->data + delta);
+ peth->h_proto = htons(len - RX_MAC_HEADER_LENGTH);
+ }
+ else { /* Its a SNAP */
+ if (org == BRIDGE_ENCAP) { /* EtherII and nuke the LLC */
+ DEBUG(3,"ray_cs untranslate Bridge encap\n");
+ delta = RX_MAC_HEADER_LENGTH
+ + sizeof(struct snaphdr_t) - ETH_HLEN;
+ peth = (struct ethhdr *)(skb->data + delta);
+ peth->h_proto = type;
+ }
+ else {
+ if (org == RFC1042_ENCAP) {
+ switch (type) {
+ case RAY_IPX_TYPE:
+ case APPLEARP_TYPE:
+ DEBUG(3,"ray_cs untranslate RFC IPX/AARP\n");
+ delta = RX_MAC_HEADER_LENGTH - ETH_HLEN;
+ peth = (struct ethhdr *)(skb->data + delta);
+ peth->h_proto = htons(len - RX_MAC_HEADER_LENGTH);
+ break;
+ default:
+ DEBUG(3,"ray_cs untranslate RFC default\n");
+ delta = RX_MAC_HEADER_LENGTH +
+ sizeof(struct snaphdr_t) - ETH_HLEN;
+ peth = (struct ethhdr *)(skb->data + delta);
+ peth->h_proto = type;
+ break;
+ }
+ }
+ else {
+ printk("ray_cs untranslate very confused by packet\n");
+ delta = RX_MAC_HEADER_LENGTH - ETH_HLEN;
+ peth = (struct ethhdr *)(skb->data + delta);
+ peth->h_proto = type;
+ }
+ }
+ }
+/* TBD reserve skb_reserve(skb, delta); */
+ skb_pull(skb, delta);
+ DEBUG(3,"untranslate after skb_pull(%d), skb->data = %p\n",delta,skb->data);
+ memcpy(peth->h_dest, destaddr, ADDRLEN);
+ memcpy(peth->h_source, srcaddr, ADDRLEN);
+#ifdef PCMCIA_DEBUG
+ if (pc_debug > 3) {
+ int i;
+ printk(KERN_DEBUG "skb->data after untranslate:");
+ for (i=0;i<64;i++)
+ printk("%02x ",skb->data[i]);
+ printk("\n");
+ }
+#endif
+} /* end untranslate */
+/*===========================================================================*/
+/* Copy data from circular receive buffer to PC memory.
+ * dest = destination address in PC memory
+ * pkt_addr = source address in receive buffer
+ * len = length of packet to copy
+ */
+static int copy_from_rx_buff(ray_dev_t *local, UCHAR *dest, int pkt_addr, int length)
+{
+ int wrap_bytes = (pkt_addr + length) - (RX_BUFF_END + 1);
+ if (wrap_bytes <= 0)
+ {
+ memcpy_fromio(dest,local->rmem + pkt_addr,length);
+ }
+ else /* Packet wrapped in circular buffer */
+ {
+ memcpy_fromio(dest,local->rmem+pkt_addr,length - wrap_bytes);
+ memcpy_fromio(dest + length - wrap_bytes, local->rmem, wrap_bytes);
+ }
+ return length;
+}
+/*===========================================================================*/
+static void release_frag_chain(ray_dev_t *local, struct rcs __iomem * prcs)
+{
+ struct rcs __iomem *prcslink = prcs;
+ int tmp = 17;
+ unsigned rcsindex = readb(&prcs->var.rx_packet.next_frag_rcs_index);
+
+ while (tmp--) {
+ writeb(CCS_BUFFER_FREE, &prcslink->buffer_status);
+ if (rcsindex >= (NUMBER_OF_CCS + NUMBER_OF_RCS)) {
+ DEBUG(1,"ray_cs interrupt bad rcsindex = 0x%x\n",rcsindex);
+ break;
+ }
+ prcslink = rcs_base(local) + rcsindex;
+ rcsindex = readb(&prcslink->var.rx_packet.next_frag_rcs_index);
+ }
+ writeb(CCS_BUFFER_FREE, &prcslink->buffer_status);
+}
+/*===========================================================================*/
+static void authenticate(ray_dev_t *local)
+{
+ dev_link_t *link = local->finder;
+ DEBUG(0,"ray_cs Starting authentication.\n");
+ if (!(link->state & DEV_PRESENT)) {
+ DEBUG(2,"ray_cs authenticate - device not present\n");
+ return;
+ }
+
+ del_timer(&local->timer);
+ if (build_auth_frame(local, local->bss_id, OPEN_AUTH_REQUEST)) {
+ local->timer.function = &join_net;
+ }
+ else {
+ local->timer.function = &authenticate_timeout;
+ }
+ local->timer.expires = jiffies + HZ*2;
+ local->timer.data = (long)local;
+ add_timer(&local->timer);
+ local->authentication_state = AWAITING_RESPONSE;
+} /* end authenticate */
+/*===========================================================================*/
+static void rx_authenticate(ray_dev_t *local, struct rcs __iomem *prcs,
+ unsigned int pkt_addr, int rx_len)
+{
+ UCHAR buff[256];
+ struct rx_msg *msg = (struct rx_msg *)buff;
+
+ del_timer(&local->timer);
+
+ copy_from_rx_buff(local, buff, pkt_addr, rx_len & 0xff);
+ /* if we are trying to get authenticated */
+ if (local->sparm.b4.a_network_type == ADHOC) {
+ DEBUG(1,"ray_cs rx_auth var= %02x %02x %02x %02x %02x %02x\n", msg->var[0],msg->var[1],msg->var[2],msg->var[3],msg->var[4],msg->var[5]);
+ if (msg->var[2] == 1) {
+ DEBUG(0,"ray_cs Sending authentication response.\n");
+ if (!build_auth_frame (local, msg->mac.addr_2, OPEN_AUTH_RESPONSE)) {
+ local->authentication_state = NEED_TO_AUTH;
+ memcpy(local->auth_id, msg->mac.addr_2, ADDRLEN);
+ }
+ }
+ }
+ else /* Infrastructure network */
+ {
+ if (local->authentication_state == AWAITING_RESPONSE) {
+ /* Verify authentication sequence #2 and success */
+ if (msg->var[2] == 2) {
+ if ((msg->var[3] | msg->var[4]) == 0) {
+ DEBUG(1,"Authentication successful\n");
+ local->card_status = CARD_AUTH_COMPLETE;
+ associate(local);
+ local->authentication_state = AUTHENTICATED;
+ }
+ else {
+ DEBUG(0,"Authentication refused\n");
+ local->card_status = CARD_AUTH_REFUSED;
+ join_net((u_long)local);
+ local->authentication_state = UNAUTHENTICATED;
+ }
+ }
+ }
+ }
+
+} /* end rx_authenticate */
+/*===========================================================================*/
+static void associate(ray_dev_t *local)
+{
+ struct ccs __iomem *pccs;
+ dev_link_t *link = local->finder;
+ struct net_device *dev = link->priv;
+ int ccsindex;
+ if (!(link->state & DEV_PRESENT)) {
+ DEBUG(2,"ray_cs associate - device not present\n");
+ return;
+ }
+ /* If no tx buffers available, return*/
+ if ((ccsindex = get_free_ccs(local)) < 0)
+ {
+/* TBD should never be here but... what if we are? */
+ DEBUG(1,"ray_cs associate - No free ccs\n");
+ return;
+ }
+ DEBUG(1,"ray_cs Starting association with access point\n");
+ pccs = ccs_base(local) + ccsindex;
+ /* fill in the CCS */
+ writeb(CCS_START_ASSOCIATION, &pccs->cmd);
+ /* Interrupt the firmware to process the command */
+ if (interrupt_ecf(local, ccsindex)) {
+ DEBUG(1,"ray_cs associate failed - ECF not ready for intr\n");
+ writeb(CCS_BUFFER_FREE, &(pccs++)->buffer_status);
+
+ del_timer(&local->timer);
+ local->timer.expires = jiffies + HZ*2;
+ local->timer.data = (long)local;
+ local->timer.function = &join_net;
+ add_timer(&local->timer);
+ local->card_status = CARD_ASSOC_FAILED;
+ return;
+ }
+ if (!sniffer) netif_start_queue(dev);
+
+} /* end associate */
+/*===========================================================================*/
+static void rx_deauthenticate(ray_dev_t *local, struct rcs __iomem *prcs,
+ unsigned int pkt_addr, int rx_len)
+{
+/* UCHAR buff[256];
+ struct rx_msg *msg = (struct rx_msg *)buff;
+*/
+ DEBUG(0,"Deauthentication frame received\n");
+ local->authentication_state = UNAUTHENTICATED;
+ /* Need to reauthenticate or rejoin depending on reason code */
+/* copy_from_rx_buff(local, buff, pkt_addr, rx_len & 0xff);
+ */
+}
+/*===========================================================================*/
+static void clear_interrupt(ray_dev_t *local)
+{
+ writeb(0, local->amem + CIS_OFFSET + HCS_INTR_OFFSET);
+}
+/*===========================================================================*/
+#ifdef CONFIG_PROC_FS
+#define MAXDATA (PAGE_SIZE - 80)
+
+static char *card_status[] = {
+ "Card inserted - uninitialized", /* 0 */
+ "Card not downloaded", /* 1 */
+ "Waiting for download parameters", /* 2 */
+ "Card doing acquisition", /* 3 */
+ "Acquisition complete", /* 4 */
+ "Authentication complete", /* 5 */
+ "Association complete", /* 6 */
+ "???", "???", "???", "???", /* 7 8 9 10 undefined */
+ "Card init error", /* 11 */
+ "Download parameters error", /* 12 */
+ "???", /* 13 */
+ "Acquisition failed", /* 14 */
+ "Authentication refused", /* 15 */
+ "Association failed" /* 16 */
+};
+
+static char *nettype[] = {"Adhoc", "Infra "};
+static char *framing[] = {"Encapsulation", "Translation"}
+;
+/*===========================================================================*/
+static int ray_cs_proc_read(char *buf, char **start, off_t offset, int len)
+{
+/* Print current values which are not available via other means
+ * eg ifconfig
+ */
+ int i;
+ dev_link_t *link;
+ struct net_device *dev;
+ ray_dev_t *local;
+ UCHAR *p;
+ struct freq_hop_element *pfh;
+ UCHAR c[33];
+
+ link = dev_list;
+ if (!link)
+ return 0;
+ dev = (struct net_device *)link->priv;
+ if (!dev)
+ return 0;
+ local = (ray_dev_t *)dev->priv;
+ if (!local)
+ return 0;
+
+ len = 0;
+
+ len += sprintf(buf + len, "Raylink Wireless LAN driver status\n");
+ len += sprintf(buf + len, "%s\n", rcsid);
+ /* build 4 does not report version, and field is 0x55 after memtest */
+ len += sprintf(buf + len, "Firmware version = ");
+ if (local->fw_ver == 0x55)
+ len += sprintf(buf + len, "4 - Use dump_cis for more details\n");
+ else
+ len += sprintf(buf + len, "%2d.%02d.%02d\n",
+ local->fw_ver, local->fw_bld, local->fw_var);
+
+ for (i=0; i<32; i++) c[i] = local->sparm.b5.a_current_ess_id[i];
+ c[32] = 0;
+ len += sprintf(buf + len, "%s network ESSID = \"%s\"\n",
+ nettype[local->sparm.b5.a_network_type], c);
+
+ p = local->bss_id;
+ len += sprintf(buf + len,
+ "BSSID = %02x:%02x:%02x:%02x:%02x:%02x\n",
+ p[0],p[1],p[2],p[3],p[4],p[5]);
+
+ len += sprintf(buf + len, "Country code = %d\n",
+ local->sparm.b5.a_curr_country_code);
+
+ i = local->card_status;
+ if (i < 0) i = 10;
+ if (i > 16) i = 10;
+ len += sprintf(buf + len, "Card status = %s\n", card_status[i]);
+
+ len += sprintf(buf + len, "Framing mode = %s\n",framing[translate]);
+
+ len += sprintf(buf + len, "Last pkt signal lvl = %d\n", local->last_rsl);
+
+ if (local->beacon_rxed) {
+ /* Pull some fields out of last beacon received */
+ len += sprintf(buf + len, "Beacon Interval = %d Kus\n",
+ local->last_bcn.beacon_intvl[0]
+ + 256 * local->last_bcn.beacon_intvl[1]);
+
+ p = local->last_bcn.elements;
+ if (p[0] == C_ESSID_ELEMENT_ID) p += p[1] + 2;
+ else {
+ len += sprintf(buf + len, "Parse beacon failed at essid element id = %d\n",p[0]);
+ return len;
+ }
+
+ if (p[0] == C_SUPPORTED_RATES_ELEMENT_ID) {
+ len += sprintf(buf + len, "Supported rate codes = ");
+ for (i=2; i<p[1] + 2; i++)
+ len += sprintf(buf + len, "0x%02x ", p[i]);
+ len += sprintf(buf + len, "\n");
+ p += p[1] + 2;
+ }
+ else {
+ len += sprintf(buf + len, "Parse beacon failed at rates element\n");
+ return len;
+ }
+
+ if (p[0] == C_FH_PARAM_SET_ELEMENT_ID) {
+ pfh = (struct freq_hop_element *)p;
+ len += sprintf(buf + len, "Hop dwell = %d Kus\n",
+ pfh->dwell_time[0] + 256 * pfh->dwell_time[1]);
+ len += sprintf(buf + len, "Hop set = %d \n", pfh->hop_set);
+ len += sprintf(buf + len, "Hop pattern = %d \n", pfh->hop_pattern);
+ len += sprintf(buf + len, "Hop index = %d \n", pfh->hop_index);
+ p += p[1] + 2;
+ }
+ else {
+ len += sprintf(buf + len, "Parse beacon failed at FH param element\n");
+ return len;
+ }
+ } else {
+ len += sprintf(buf + len, "No beacons received\n");
+ }
+ return len;
+}
+
+#endif
+/*===========================================================================*/
+static int build_auth_frame(ray_dev_t *local, UCHAR *dest, int auth_type)
+{
+ int addr;
+ struct ccs __iomem *pccs;
+ struct tx_msg __iomem *ptx;
+ int ccsindex;
+
+ /* If no tx buffers available, return */
+ if ((ccsindex = get_free_tx_ccs(local)) < 0)
+ {
+ DEBUG(1,"ray_cs send authenticate - No free tx ccs\n");
+ return -1;
+ }
+
+ pccs = ccs_base(local) + ccsindex;
+
+ /* Address in card space */
+ addr = TX_BUF_BASE + (ccsindex << 11);
+ /* fill in the CCS */
+ writeb(CCS_TX_REQUEST, &pccs->cmd);
+ writeb(addr >> 8, pccs->var.tx_request.tx_data_ptr);
+ writeb(0x20, pccs->var.tx_request.tx_data_ptr + 1);
+ writeb(TX_AUTHENTICATE_LENGTH_MSB, pccs->var.tx_request.tx_data_length);
+ writeb(TX_AUTHENTICATE_LENGTH_LSB,pccs->var.tx_request.tx_data_length + 1);
+ writeb(0, &pccs->var.tx_request.pow_sav_mode);
+
+ ptx = local->sram + addr;
+ /* fill in the mac header */
+ writeb(PROTOCOL_VER | AUTHENTIC_TYPE, &ptx->mac.frame_ctl_1);
+ writeb(0, &ptx->mac.frame_ctl_2);
+
+ memcpy_toio(ptx->mac.addr_1, dest, ADDRLEN);
+ memcpy_toio(ptx->mac.addr_2, local->sparm.b4.a_mac_addr, ADDRLEN);
+ memcpy_toio(ptx->mac.addr_3, local->bss_id, ADDRLEN);
+
+ /* Fill in msg body with protocol 00 00, sequence 01 00 ,status 00 00 */
+ memset_io(ptx->var, 0, 6);
+ writeb(auth_type & 0xff, ptx->var + 2);
+
+ /* Interrupt the firmware to process the command */
+ if (interrupt_ecf(local, ccsindex)) {
+ DEBUG(1,"ray_cs send authentication request failed - ECF not ready for intr\n");
+ writeb(CCS_BUFFER_FREE, &(pccs++)->buffer_status);
+ return -1;
+ }
+ return 0;
+} /* End build_auth_frame */
+
+/*===========================================================================*/
+#ifdef CONFIG_PROC_FS
+static void raycs_write(const char *name, write_proc_t *w, void *data)
+{
+ struct proc_dir_entry * entry = create_proc_entry(name, S_IFREG | S_IWUSR, NULL);
+ if (entry) {
+ entry->write_proc = w;
+ entry->data = data;
+ }
+}
+
+static int write_essid(struct file *file, const char __user *buffer, unsigned long count, void *data)
+{
+ static char proc_essid[33];
+ int len = count;
+
+ if (len > 32)
+ len = 32;
+ memset(proc_essid, 0, 33);
+ if (copy_from_user(proc_essid, buffer, len))
+ return -EFAULT;
+ essid = proc_essid;
+ return count;
+}
+
+static int write_int(struct file *file, const char __user *buffer, unsigned long count, void *data)
+{
+ static char proc_number[10];
+ char *p;
+ int nr, len;
+
+ if (!count)
+ return 0;
+
+ if (count > 9)
+ return -EINVAL;
+ if (copy_from_user(proc_number, buffer, count))
+ return -EFAULT;
+ p = proc_number;
+ nr = 0;
+ len = count;
+ do {
+ unsigned int c = *p - '0';
+ if (c > 9)
+ return -EINVAL;
+ nr = nr*10 + c;
+ p++;
+ } while (--len);
+ *(int *)data = nr;
+ return count;
+}
+#endif
+
+static struct pcmcia_driver ray_driver = {
+ .owner = THIS_MODULE,
+ .drv = {
+ .name = "ray_cs",
+ },
+ .attach = ray_attach,
+ .detach = ray_detach,
+};
+
+static int __init init_ray_cs(void)
+{
+ int rc;
+
+ DEBUG(1, "%s\n", rcsid);
+ rc = pcmcia_register_driver(&ray_driver);
+ DEBUG(1, "raylink init_module register_pcmcia_driver returns 0x%x\n",rc);
+
+#ifdef CONFIG_PROC_FS
+ proc_mkdir("driver/ray_cs", NULL);
+
+ create_proc_info_entry("driver/ray_cs/ray_cs", 0, NULL, &ray_cs_proc_read);
+ raycs_write("driver/ray_cs/essid", write_essid, NULL);
+ raycs_write("driver/ray_cs/net_type", write_int, &net_type);
+ raycs_write("driver/ray_cs/translate", write_int, &translate);
+#endif
+ if (translate != 0) translate = 1;
+ return 0;
+} /* init_ray_cs */
+
+/*===========================================================================*/
+
+static void __exit exit_ray_cs(void)
+{
+ DEBUG(0, "ray_cs: cleanup_module\n");
+
+#ifdef CONFIG_PROC_FS
+ remove_proc_entry("driver/ray_cs/ray_cs", NULL);
+ remove_proc_entry("driver/ray_cs/essid", NULL);
+ remove_proc_entry("driver/ray_cs/net_type", NULL);
+ remove_proc_entry("driver/ray_cs/translate", NULL);
+ remove_proc_entry("driver/ray_cs", NULL);
+#endif
+
+ pcmcia_unregister_driver(&ray_driver);
+ BUG_ON(dev_list != NULL);
+} /* exit_ray_cs */
+
+module_init(init_ray_cs);
+module_exit(exit_ray_cs);
+
+/*===========================================================================*/
diff --git a/drivers/net/wireless/ray_cs.h b/drivers/net/wireless/ray_cs.h
new file mode 100644
index 0000000..c77afa1
--- /dev/null
+++ b/drivers/net/wireless/ray_cs.h
@@ -0,0 +1,78 @@
+/* Raytheon wireless LAN PCMCIA card driver for Linux
+ A PCMCIA client driver for the Raylink wireless network card
+ Written by Corey Thomas
+*/
+
+#ifndef RAYLINK_H
+
+struct beacon_rx {
+ struct mac_header mac;
+ UCHAR timestamp[8];
+ UCHAR beacon_intvl[2];
+ UCHAR capability[2];
+ UCHAR elements[sizeof(struct essid_element)
+ + sizeof(struct rates_element)
+ + sizeof(struct freq_hop_element)
+ + sizeof(struct japan_call_sign_element)
+ + sizeof(struct tim_element)];
+};
+
+/* Return values for get_free{,_tx}_ccs */
+#define ECCSFULL (-1)
+#define ECCSBUSY (-2)
+#define ECARDGONE (-3)
+
+typedef struct ray_dev_t {
+ int card_status;
+ int authentication_state;
+ dev_node_t node;
+ window_handle_t amem_handle; /* handle to window for attribute memory */
+ window_handle_t rmem_handle; /* handle to window for rx buffer on card */
+ void __iomem *sram; /* pointer to beginning of shared RAM */
+ void __iomem *amem; /* pointer to attribute mem window */
+ void __iomem *rmem; /* pointer to receive buffer window */
+ dev_link_t *finder; /* pointer back to dev_link_t for card */
+ struct timer_list timer;
+ long tx_ccs_lock;
+ long ccs_lock;
+ int dl_param_ccs;
+ union {
+ struct b4_startup_params b4;
+ struct b5_startup_params b5;
+ } sparm;
+ int timeout_flag;
+ UCHAR supported_rates[8];
+ UCHAR japan_call_sign[12];
+ struct startup_res_6 startup_res;
+ int num_multi;
+ /* Network parameters from start/join */
+ UCHAR bss_id[6];
+ UCHAR auth_id[6];
+ UCHAR net_default_tx_rate;
+ UCHAR encryption;
+ struct net_device_stats stats;
+
+ UCHAR net_type;
+ UCHAR sta_type;
+ UCHAR fw_ver;
+ UCHAR fw_bld;
+ UCHAR fw_var;
+ UCHAR ASIC_version;
+ UCHAR assoc_id[2];
+ UCHAR tib_length;
+ UCHAR last_rsl;
+ int beacon_rxed;
+ struct beacon_rx last_bcn;
+#ifdef WIRELESS_EXT
+ iw_stats wstats; /* Wireless specific stats */
+#endif
+#ifdef WIRELESS_SPY
+ int spy_number; /* Number of addresses to spy */
+ mac_addr spy_address[IW_MAX_SPY + 1]; /* The addresses to spy */
+ iw_qual spy_stat[IW_MAX_SPY + 1]; /* Statistics gathered */
+#endif /* WIRELESS_SPY */
+
+} ray_dev_t;
+/*****************************************************************************/
+
+#endif /* RAYLINK_H */
diff --git a/drivers/net/wireless/rayctl.h b/drivers/net/wireless/rayctl.h
new file mode 100644
index 0000000..49d9b26
--- /dev/null
+++ b/drivers/net/wireless/rayctl.h
@@ -0,0 +1,732 @@
+#ifndef RAYLINK_H
+
+typedef unsigned char UCHAR;
+
+/****** IEEE 802.11 constants ************************************************/
+#define ADDRLEN 6
+/* Frame control 1 bit fields */
+#define PROTOCOL_VER 0x00
+#define DATA_TYPE 0x08
+#define ASSOC_REQ_TYPE 0x00
+#define ASSOC_RESP_TYPE 0x10
+#define REASSOC_REQ_TYPE 0x20
+#define REASSOC_RESP_TYPE 0x30
+#define NULL_MSG_TYPE 0x48
+#define BEACON_TYPE 0x80
+#define DISASSOC_TYPE 0xA0
+#define PSPOLL_TYPE 0xA4
+#define AUTHENTIC_TYPE 0xB0
+#define DEAUTHENTIC_TYPE 0xC0
+/* Frame control 2 bit fields */
+#define FC2_TO_DS 0x01
+#define FC2_FROM_DS 0x02
+#define FC2_MORE_FRAG 0x04
+#define FC2_RETRY 0x08
+#define FC2_PSM 0x10
+#define FC2_MORE_DATA 0x20
+#define FC2_WEP 0x40
+#define FC2_ORDER 0x80
+/*****************************************************************************/
+/* 802.11 element ID's and lengths */
+#define C_BP_CAPABILITY_ESS 0x01
+#define C_BP_CAPABILITY_IBSS 0x02
+#define C_BP_CAPABILITY_CF_POLLABLE 0x04
+#define C_BP_CAPABILITY_CF_POLL_REQUEST 0x08
+#define C_BP_CAPABILITY_PRIVACY 0x10
+
+#define C_ESSID_ELEMENT_ID 0
+#define C_ESSID_ELEMENT_MAX_LENGTH 32
+
+#define C_SUPPORTED_RATES_ELEMENT_ID 1
+#define C_SUPPORTED_RATES_ELEMENT_LENGTH 2
+
+#define C_FH_PARAM_SET_ELEMENT_ID 2
+#define C_FH_PARAM_SET_ELEMENT_LNGTH 5
+
+#define C_CF_PARAM_SET_ELEMENT_ID 4
+#define C_CF_PARAM_SET_ELEMENT_LNGTH 6
+
+#define C_TIM_ELEMENT_ID 5
+#define C_TIM_BITMAP_LENGTH 251
+#define C_TIM_BMCAST_BIT 0x01
+
+#define C_IBSS_ELEMENT_ID 6
+#define C_IBSS_ELEMENT_LENGTH 2
+
+#define C_JAPAN_CALL_SIGN_ELEMENT_ID 51
+#define C_JAPAN_CALL_SIGN_ELEMENT_LNGTH 12
+
+#define C_DISASSOC_REASON_CODE_LEN 2
+#define C_DISASSOC_REASON_CODE_DEFAULT 8
+
+#define C_CRC_LEN 4
+#define C_NUM_SUPPORTED_RATES 8
+/****** IEEE 802.11 mac header for type data packets *************************/
+struct mac_header {
+ UCHAR frame_ctl_1;
+ UCHAR frame_ctl_2;
+ UCHAR duration_lsb;
+ UCHAR duration_msb;
+ UCHAR addr_1[ADDRLEN];
+ UCHAR addr_2[ADDRLEN];
+ UCHAR addr_3[ADDRLEN];
+ UCHAR seq_frag_num[2];
+/* UCHAR addr_4[ADDRLEN]; *//* only present for AP to AP (TO DS and FROM DS */
+};
+/****** IEEE 802.11 frame element structures *********************************/
+struct essid_element
+{
+ UCHAR id;
+ UCHAR length;
+ UCHAR text[C_ESSID_ELEMENT_MAX_LENGTH];
+};
+struct rates_element
+{
+ UCHAR id;
+ UCHAR length;
+ UCHAR value[8];
+};
+struct freq_hop_element
+{
+ UCHAR id;
+ UCHAR length;
+ UCHAR dwell_time[2];
+ UCHAR hop_set;
+ UCHAR hop_pattern;
+ UCHAR hop_index;
+};
+struct tim_element
+{
+ UCHAR id;
+ UCHAR length;
+ UCHAR dtim_count;
+ UCHAR dtim_period;
+ UCHAR bitmap_control;
+ UCHAR tim[C_TIM_BITMAP_LENGTH];
+};
+struct ibss_element
+{
+ UCHAR id;
+ UCHAR length;
+ UCHAR atim_window[2];
+};
+struct japan_call_sign_element
+{
+ UCHAR id;
+ UCHAR length;
+ UCHAR call_sign[12];
+};
+/****** Beacon message structures ********************************************/
+/* .elements is a large lump of max size because elements are variable size */
+struct infra_beacon
+{
+ UCHAR timestamp[8];
+ UCHAR beacon_intvl[2];
+ UCHAR capability[2];
+ UCHAR elements[sizeof(struct essid_element)
+ + sizeof(struct rates_element)
+ + sizeof(struct freq_hop_element)
+ + sizeof(struct japan_call_sign_element)
+ + sizeof(struct tim_element)];
+};
+struct adhoc_beacon
+{
+ UCHAR timestamp[8];
+ UCHAR beacon_intvl[2];
+ UCHAR capability[2];
+ UCHAR elements[sizeof(struct essid_element)
+ + sizeof(struct rates_element)
+ + sizeof(struct freq_hop_element)
+ + sizeof(struct japan_call_sign_element)
+ + sizeof(struct ibss_element)];
+};
+/*****************************************************************************/
+/*****************************************************************************/
+/* #define C_MAC_HDR_2_WEP 0x40 */
+/* TX/RX CCS constants */
+#define TX_HEADER_LENGTH 0x1C
+#define RX_MAC_HEADER_LENGTH 0x18
+#define TX_AUTHENTICATE_LENGTH (TX_HEADER_LENGTH + 6)
+#define TX_AUTHENTICATE_LENGTH_MSB (TX_AUTHENTICATE_LENGTH >> 8)
+#define TX_AUTHENTICATE_LENGTH_LSB (TX_AUTHENTICATE_LENGTH & 0xff)
+#define TX_DEAUTHENTICATE_LENGTH (TX_HEADER_LENGTH + 2)
+#define TX_DEAUTHENTICATE_LENGTH_MSB (TX_AUTHENTICATE_LENGTH >> 8)
+#define TX_DEAUTHENTICATE_LENGTH_LSB (TX_AUTHENTICATE_LENGTH & 0xff)
+#define FCS_LEN 4
+
+#define ADHOC 0
+#define INFRA 1
+
+#define TYPE_STA 0
+#define TYPE_AP 1
+
+#define PASSIVE_SCAN 1
+#define ACTIVE_SCAN 1
+
+#define PSM_CAM 0
+
+/* Country codes */
+#define USA 1
+#define EUROPE 2
+#define JAPAN 3
+#define KOREA 4
+#define SPAIN 5
+#define FRANCE 6
+#define ISRAEL 7
+#define AUSTRALIA 8
+#define JAPAN_TEST 9
+
+/* Hop pattern lengths */
+#define USA_HOP_MOD 79
+#define EUROPE_HOP_MOD 79
+#define JAPAN_HOP_MOD 23
+#define KOREA_HOP_MOD 23
+#define SPAIN_HOP_MOD 27
+#define FRANCE_HOP_MOD 35
+#define ISRAEL_HOP_MOD 35
+#define AUSTRALIA_HOP_MOD 47
+#define JAPAN_TEST_HOP_MOD 23
+
+#define ESSID_SIZE 32
+/**********************************************************************/
+/* CIS Register Constants */
+#define CIS_OFFSET 0x0f00
+/* Configuration Option Register (0x0F00) */
+#define COR_OFFSET 0x00
+#define COR_SOFT_RESET 0x80
+#define COR_LEVEL_IRQ 0x40
+#define COR_CONFIG_NUM 0x01
+#define COR_DEFAULT (COR_LEVEL_IRQ | COR_CONFIG_NUM)
+
+/* Card Configuration and Status Register (0x0F01) */
+#define CCSR_OFFSET 0x01
+#define CCSR_HOST_INTR_PENDING 0x01
+#define CCSR_POWER_DOWN 0x04
+
+/* HCS Interrupt Register (0x0F05) */
+#define HCS_INTR_OFFSET 0x05
+/* #define HCS_INTR_OFFSET 0x0A */
+#define HCS_INTR_CLEAR 0x00
+
+/* ECF Interrupt Register (0x0F06) */
+#define ECF_INTR_OFFSET 0x06
+/* #define ECF_INTR_OFFSET 0x0C */
+#define ECF_INTR_SET 0x01
+
+/* Authorization Register 0 (0x0F08) */
+#define AUTH_0_ON 0x57
+
+/* Authorization Register 1 (0x0F09) */
+#define AUTH_1_ON 0x82
+
+/* Program Mode Register (0x0F0A) */
+#define PC2PM 0x02
+#define PC2CAL 0x10
+#define PC2MLSE 0x20
+
+/* PC Test Mode Register (0x0F0B) */
+#define PC_TEST_MODE 0x08
+
+/* Frequency Control Word (0x0F10) */
+/* Range 0x02 - 0xA6 */
+
+/* Test Mode Control 1-4 (0x0F14 - 0x0F17) */
+
+/**********************************************************************/
+
+/* Shared RAM Area */
+#define SCB_BASE 0x0000
+#define STATUS_BASE 0x0100
+#define HOST_TO_ECF_BASE 0x0200
+#define ECF_TO_HOST_BASE 0x0300
+#define CCS_BASE 0x0400
+#define RCS_BASE 0x0800
+#define INFRA_TIM_BASE 0x0C00
+#define SSID_LIST_BASE 0x0D00
+#define TX_BUF_BASE 0x1000
+#define RX_BUF_BASE 0x8000
+
+#define NUMBER_OF_CCS 64
+#define NUMBER_OF_RCS 64
+/*#define NUMBER_OF_TX_CCS 14 */
+#define NUMBER_OF_TX_CCS 14
+
+#define TX_BUF_SIZE (2048 - sizeof(struct tx_msg))
+#define RX_BUFF_END 0x3FFF
+/* Values for buffer_status */
+#define CCS_BUFFER_FREE 0
+#define CCS_BUFFER_BUSY 1
+#define CCS_COMMAND_COMPLETE 2
+#define CCS_COMMAND_FAILED 3
+
+/* Values for cmd */
+#define CCS_DOWNLOAD_STARTUP_PARAMS 1
+#define CCS_UPDATE_PARAMS 2
+#define CCS_REPORT_PARAMS 3
+#define CCS_UPDATE_MULTICAST_LIST 4
+#define CCS_UPDATE_POWER_SAVINGS_MODE 5
+#define CCS_START_NETWORK 6
+#define CCS_JOIN_NETWORK 7
+#define CCS_START_ASSOCIATION 8
+#define CCS_TX_REQUEST 9
+#define CCS_TEST_MEMORY 0xa
+#define CCS_SHUTDOWN 0xb
+#define CCS_DUMP_MEMORY 0xc
+#define CCS_START_TIMER 0xe
+#define CCS_LAST_CMD CCS_START_TIMER
+
+/* Values for link field */
+#define CCS_END_LIST 0xff
+
+/* values for buffer_status field */
+#define RCS_BUFFER_FREE 0
+#define RCS_BUFFER_BUSY 1
+#define RCS_COMPLETE 2
+#define RCS_FAILED 3
+#define RCS_BUFFER_RELEASE 0xFF
+
+/* values for interrupt_id field */
+#define PROCESS_RX_PACKET 0x80 /* */
+#define REJOIN_NET_COMPLETE 0x81 /* RCS ID: Rejoin Net Complete */
+#define ROAMING_INITIATED 0x82 /* RCS ID: Roaming Initiated */
+#define JAPAN_CALL_SIGN_RXD 0x83 /* RCS ID: New Japan Call Sign */
+
+/*****************************************************************************/
+/* Memory types for dump memory command */
+#define C_MEM_PROG 0
+#define C_MEM_XDATA 1
+#define C_MEM_SFR 2
+#define C_MEM_IDATA 3
+
+/*** Return values for hw_xmit **********/
+#define XMIT_OK (0)
+#define XMIT_MSG_BAD (-1)
+#define XMIT_NO_CCS (-2)
+#define XMIT_NO_INTR (-3)
+#define XMIT_NEED_AUTH (-4)
+
+/*** Values for card status */
+#define CARD_INSERTED (0)
+
+#define CARD_AWAITING_PARAM (1)
+#define CARD_INIT_ERROR (11)
+
+#define CARD_DL_PARAM (2)
+#define CARD_DL_PARAM_ERROR (12)
+
+#define CARD_DOING_ACQ (3)
+
+#define CARD_ACQ_COMPLETE (4)
+#define CARD_ACQ_FAILED (14)
+
+#define CARD_AUTH_COMPLETE (5)
+#define CARD_AUTH_REFUSED (15)
+
+#define CARD_ASSOC_COMPLETE (6)
+#define CARD_ASSOC_FAILED (16)
+
+/*** Values for authentication_state ***********************************/
+#define UNAUTHENTICATED (0)
+#define AWAITING_RESPONSE (1)
+#define AUTHENTICATED (2)
+#define NEED_TO_AUTH (3)
+
+/*** Values for authentication type ************************************/
+#define OPEN_AUTH_REQUEST (1)
+#define OPEN_AUTH_RESPONSE (2)
+#define BROADCAST_DEAUTH (0xc0)
+/*** Values for timer functions ****************************************/
+#define TODO_NOTHING (0)
+#define TODO_VERIFY_DL_START (-1)
+#define TODO_START_NET (-2)
+#define TODO_JOIN_NET (-3)
+#define TODO_AUTHENTICATE_TIMEOUT (-4)
+#define TODO_SEND_CCS (-5)
+/***********************************************************************/
+/* Parameter passing structure for update/report parameter CCS's */
+struct object_id {
+ void *object_addr;
+ unsigned char object_length;
+};
+
+#define OBJID_network_type 0
+#define OBJID_acting_as_ap_status 1
+#define OBJID_current_ess_id 2
+#define OBJID_scanning_mode 3
+#define OBJID_power_mgt_state 4
+#define OBJID_mac_address 5
+#define OBJID_frag_threshold 6
+#define OBJID_hop_time 7
+#define OBJID_beacon_period 8
+#define OBJID_dtim_period 9
+#define OBJID_retry_max 10
+#define OBJID_ack_timeout 11
+#define OBJID_sifs 12
+#define OBJID_difs 13
+#define OBJID_pifs 14
+#define OBJID_rts_threshold 15
+#define OBJID_scan_dwell_time 16
+#define OBJID_max_scan_dwell_time 17
+#define OBJID_assoc_resp_timeout 18
+#define OBJID_adhoc_scan_cycle_max 19
+#define OBJID_infra_scan_cycle_max 20
+#define OBJID_infra_super_cycle_max 21
+#define OBJID_promiscuous_mode 22
+#define OBJID_unique_word 23
+#define OBJID_slot_time 24
+#define OBJID_roaming_low_snr 25
+#define OBJID_low_snr_count_thresh 26
+#define OBJID_infra_missed_bcn 27
+#define OBJID_adhoc_missed_bcn 28
+#define OBJID_curr_country_code 29
+#define OBJID_hop_pattern 30
+#define OBJID_reserved 31
+#define OBJID_cw_max_msb 32
+#define OBJID_cw_min_msb 33
+#define OBJID_noise_filter_gain 34
+#define OBJID_noise_limit_offset 35
+#define OBJID_det_rssi_thresh_offset 36
+#define OBJID_med_busy_thresh_offset 37
+#define OBJID_det_sync_thresh 38
+#define OBJID_test_mode 39
+#define OBJID_test_min_chan_num 40
+#define OBJID_test_max_chan_num 41
+#define OBJID_allow_bcast_ID_prbrsp 42
+#define OBJID_privacy_must_start 43
+#define OBJID_privacy_can_join 44
+#define OBJID_basic_rate_set 45
+
+/**** Configuration/Status/Control Area ***************************/
+/* System Control Block (SCB) Area
+ * Located at Shared RAM offset 0
+ */
+struct scb {
+ UCHAR ccs_index;
+ UCHAR rcs_index;
+};
+
+/****** Status area at Shared RAM offset 0x0100 ******************************/
+struct status {
+ UCHAR mrx_overflow_for_host; /* 0=ECF may write, 1=host may write*/
+ UCHAR mrx_checksum_error_for_host; /* 0=ECF may write, 1=host may write*/
+ UCHAR rx_hec_error_for_host; /* 0=ECF may write, 1=host may write*/
+ UCHAR reserved1;
+ short mrx_overflow; /* ECF increments on rx overflow */
+ short mrx_checksum_error; /* ECF increments on rx CRC error */
+ short rx_hec_error; /* ECF incs on mac header CRC error */
+ UCHAR rxnoise; /* Average RSL measurement */
+};
+
+/****** Host-to-ECF Data Area at Shared RAM offset 0x200 *********************/
+struct host_to_ecf_area {
+
+};
+
+/****** ECF-to-Host Data Area at Shared RAM offset 0x0300 ********************/
+struct startup_res_518 {
+ UCHAR startup_word;
+ UCHAR station_addr[ADDRLEN];
+ UCHAR calc_prog_chksum;
+ UCHAR calc_cis_chksum;
+ UCHAR ecf_spare[7];
+ UCHAR japan_call_sign[12];
+};
+
+struct startup_res_6 {
+ UCHAR startup_word;
+ UCHAR station_addr[ADDRLEN];
+ UCHAR reserved;
+ UCHAR supp_rates[8];
+ UCHAR japan_call_sign[12];
+ UCHAR calc_prog_chksum;
+ UCHAR calc_cis_chksum;
+ UCHAR firmware_version[3];
+ UCHAR asic_version;
+ UCHAR tib_length;
+};
+
+struct start_join_net_params {
+ UCHAR net_type;
+ UCHAR ssid[ESSID_SIZE];
+ UCHAR reserved;
+ UCHAR privacy_can_join;
+};
+
+/****** Command Control Structure area at Shared ram offset 0x0400 ***********/
+/* Structures for command specific parameters (ccs.var) */
+struct update_param_cmd {
+ UCHAR object_id;
+ UCHAR number_objects;
+ UCHAR failure_cause;
+};
+struct report_param_cmd {
+ UCHAR object_id;
+ UCHAR number_objects;
+ UCHAR failure_cause;
+ UCHAR length;
+};
+struct start_network_cmd {
+ UCHAR update_param;
+ UCHAR bssid[ADDRLEN];
+ UCHAR net_initiated;
+ UCHAR net_default_tx_rate;
+ UCHAR encryption;
+};
+struct join_network_cmd {
+ UCHAR update_param;
+ UCHAR bssid[ADDRLEN];
+ UCHAR net_initiated;
+ UCHAR net_default_tx_rate;
+ UCHAR encryption;
+};
+struct tx_requested_cmd {
+
+ UCHAR tx_data_ptr[2];
+ UCHAR tx_data_length[2];
+ UCHAR host_reserved[2];
+ UCHAR reserved[3];
+ UCHAR tx_rate;
+ UCHAR pow_sav_mode;
+ UCHAR retries;
+ UCHAR antenna;
+};
+struct tx_requested_cmd_4 {
+
+ UCHAR tx_data_ptr[2];
+ UCHAR tx_data_length[2];
+ UCHAR dest_addr[ADDRLEN];
+ UCHAR pow_sav_mode;
+ UCHAR retries;
+ UCHAR station_id;
+};
+struct memory_dump_cmd {
+ UCHAR memory_type;
+ UCHAR memory_ptr[2];
+ UCHAR length;
+};
+struct update_association_cmd {
+ UCHAR status;
+ UCHAR aid[2];
+};
+struct start_timer_cmd {
+ UCHAR duration[2];
+};
+
+struct ccs {
+ UCHAR buffer_status; /* 0 = buffer free, 1 = buffer busy */
+ /* 2 = command complete, 3 = failed */
+ UCHAR cmd; /* command to ECF */
+ UCHAR link; /* link to next CCS, FF=end of list */
+ /* command specific parameters */
+ union {
+ char reserved[13];
+ struct update_param_cmd update_param;
+ struct report_param_cmd report_param;
+ UCHAR nummulticast;
+ UCHAR mode;
+ struct start_network_cmd start_network;
+ struct join_network_cmd join_network;
+ struct tx_requested_cmd tx_request;
+ struct memory_dump_cmd memory_dump;
+ struct update_association_cmd update_assoc;
+ struct start_timer_cmd start_timer;
+ } var;
+};
+
+/*****************************************************************************/
+/* Transmit buffer structures */
+struct tib_structure {
+ UCHAR ccs_index;
+ UCHAR psm;
+ UCHAR pass_fail;
+ UCHAR retry_count;
+ UCHAR max_retries;
+ UCHAR frags_remaining;
+ UCHAR no_rb;
+ UCHAR rts_reqd;
+ UCHAR csma_tx_cntrl_2;
+ UCHAR sifs_tx_cntrl_2;
+ UCHAR tx_dma_addr_1[2];
+ UCHAR tx_dma_addr_2[2];
+ UCHAR var_dur_2mhz[2];
+ UCHAR var_dur_1mhz[2];
+ UCHAR max_dur_2mhz[2];
+ UCHAR max_dur_1mhz[2];
+ UCHAR hdr_len;
+ UCHAR max_frag_len[2];
+ UCHAR var_len[2];
+ UCHAR phy_hdr_4;
+ UCHAR mac_hdr_1;
+ UCHAR mac_hdr_2;
+ UCHAR sid[2];
+};
+
+struct phy_header {
+ UCHAR sfd[2];
+ UCHAR hdr_3;
+ UCHAR hdr_4;
+};
+struct rx_msg {
+ struct mac_header mac;
+ UCHAR var[1];
+};
+
+struct tx_msg {
+ struct tib_structure tib;
+ struct phy_header phy;
+ struct mac_header mac;
+ UCHAR var[1];
+};
+
+/****** ECF Receive Control Stucture (RCS) Area at Shared RAM offset 0x0800 */
+/* Structures for command specific parameters (rcs.var) */
+struct rx_packet_cmd {
+ UCHAR rx_data_ptr[2];
+ UCHAR rx_data_length[2];
+ UCHAR rx_sig_lev;
+ UCHAR next_frag_rcs_index;
+ UCHAR totalpacketlength[2];
+};
+struct rejoin_net_cmplt_cmd {
+ UCHAR reserved;
+ UCHAR bssid[ADDRLEN];
+};
+struct japan_call_sign_rxd {
+ UCHAR rxd_call_sign[8];
+ UCHAR reserved[5];
+};
+
+struct rcs {
+ UCHAR buffer_status;
+ UCHAR interrupt_id;
+ UCHAR link_field;
+ /* command specific parameters */
+ union {
+ UCHAR reserved[13];
+ struct rx_packet_cmd rx_packet;
+ struct rejoin_net_cmplt_cmd rejoin_net_complete;
+ struct japan_call_sign_rxd japan_call_sign;
+ } var;
+};
+
+/****** Startup parameter structures for both versions of firmware ***********/
+struct b4_startup_params {
+ UCHAR a_network_type; /* C_ADHOC, C_INFRA */
+ UCHAR a_acting_as_ap_status; /* C_TYPE_STA, C_TYPE_AP */
+ UCHAR a_current_ess_id[ESSID_SIZE]; /* Null terminated unless 32 long */
+ UCHAR a_scanning_mode; /* passive 0, active 1 */
+ UCHAR a_power_mgt_state; /* CAM 0, */
+ UCHAR a_mac_addr[ADDRLEN]; /* */
+ UCHAR a_frag_threshold[2]; /* 512 */
+ UCHAR a_hop_time[2]; /* 16k * 2**n, n=0-4 in Kus */
+ UCHAR a_beacon_period[2]; /* n * a_hop_time in Kus */
+ UCHAR a_dtim_period; /* in beacons */
+ UCHAR a_retry_max; /* */
+ UCHAR a_ack_timeout; /* */
+ UCHAR a_sifs; /* */
+ UCHAR a_difs; /* */
+ UCHAR a_pifs; /* */
+ UCHAR a_rts_threshold[2]; /* */
+ UCHAR a_scan_dwell_time[2]; /* */
+ UCHAR a_max_scan_dwell_time[2]; /* */
+ UCHAR a_assoc_resp_timeout_thresh; /* */
+ UCHAR a_adhoc_scan_cycle_max; /* */
+ UCHAR a_infra_scan_cycle_max; /* */
+ UCHAR a_infra_super_scan_cycle_max; /* */
+ UCHAR a_promiscuous_mode; /* */
+ UCHAR a_unique_word[2]; /* */
+ UCHAR a_slot_time; /* */
+ UCHAR a_roaming_low_snr_thresh; /* */
+ UCHAR a_low_snr_count_thresh; /* */
+ UCHAR a_infra_missed_bcn_thresh; /* */
+ UCHAR a_adhoc_missed_bcn_thresh; /* */
+ UCHAR a_curr_country_code; /* C_USA */
+ UCHAR a_hop_pattern; /* */
+ UCHAR a_hop_pattern_length; /* */
+/* b4 - b5 differences start here */
+ UCHAR a_cw_max; /* */
+ UCHAR a_cw_min; /* */
+ UCHAR a_noise_filter_gain; /* */
+ UCHAR a_noise_limit_offset; /* */
+ UCHAR a_det_rssi_thresh_offset; /* */
+ UCHAR a_med_busy_thresh_offset; /* */
+ UCHAR a_det_sync_thresh; /* */
+ UCHAR a_test_mode; /* */
+ UCHAR a_test_min_chan_num; /* */
+ UCHAR a_test_max_chan_num; /* */
+ UCHAR a_rx_tx_delay; /* */
+ UCHAR a_current_bss_id[ADDRLEN]; /* */
+ UCHAR a_hop_set; /* */
+};
+struct b5_startup_params {
+ UCHAR a_network_type; /* C_ADHOC, C_INFRA */
+ UCHAR a_acting_as_ap_status; /* C_TYPE_STA, C_TYPE_AP */
+ UCHAR a_current_ess_id[ESSID_SIZE]; /* Null terminated unless 32 long */
+ UCHAR a_scanning_mode; /* passive 0, active 1 */
+ UCHAR a_power_mgt_state; /* CAM 0, */
+ UCHAR a_mac_addr[ADDRLEN]; /* */
+ UCHAR a_frag_threshold[2]; /* 512 */
+ UCHAR a_hop_time[2]; /* 16k * 2**n, n=0-4 in Kus */
+ UCHAR a_beacon_period[2]; /* n * a_hop_time in Kus */
+ UCHAR a_dtim_period; /* in beacons */
+ UCHAR a_retry_max; /* 4 */
+ UCHAR a_ack_timeout; /* */
+ UCHAR a_sifs; /* */
+ UCHAR a_difs; /* */
+ UCHAR a_pifs; /* */
+ UCHAR a_rts_threshold[2]; /* */
+ UCHAR a_scan_dwell_time[2]; /* */
+ UCHAR a_max_scan_dwell_time[2]; /* */
+ UCHAR a_assoc_resp_timeout_thresh; /* */
+ UCHAR a_adhoc_scan_cycle_max; /* */
+ UCHAR a_infra_scan_cycle_max; /* */
+ UCHAR a_infra_super_scan_cycle_max; /* */
+ UCHAR a_promiscuous_mode; /* */
+ UCHAR a_unique_word[2]; /* */
+ UCHAR a_slot_time; /* */
+ UCHAR a_roaming_low_snr_thresh; /* */
+ UCHAR a_low_snr_count_thresh; /* */
+ UCHAR a_infra_missed_bcn_thresh; /* */
+ UCHAR a_adhoc_missed_bcn_thresh; /* */
+ UCHAR a_curr_country_code; /* C_USA */
+ UCHAR a_hop_pattern; /* */
+ UCHAR a_hop_pattern_length; /* */
+/* b4 - b5 differences start here */
+ UCHAR a_cw_max[2]; /* */
+ UCHAR a_cw_min[2]; /* */
+ UCHAR a_noise_filter_gain; /* */
+ UCHAR a_noise_limit_offset; /* */
+ UCHAR a_det_rssi_thresh_offset; /* */
+ UCHAR a_med_busy_thresh_offset; /* */
+ UCHAR a_det_sync_thresh; /* */
+ UCHAR a_test_mode; /* */
+ UCHAR a_test_min_chan_num; /* */
+ UCHAR a_test_max_chan_num; /* */
+ UCHAR a_allow_bcast_SSID_probe_rsp;
+ UCHAR a_privacy_must_start;
+ UCHAR a_privacy_can_join;
+ UCHAR a_basic_rate_set[8];
+};
+
+/*****************************************************************************/
+#define RAY_IOCG_PARMS (SIOCDEVPRIVATE)
+#define RAY_IOCS_PARMS (SIOCDEVPRIVATE + 1)
+#define RAY_DO_CMD (SIOCDEVPRIVATE + 2)
+
+/****** ethernet <-> 802.11 translation **************************************/
+typedef struct snaphdr_t
+{
+ UCHAR dsap;
+ UCHAR ssap;
+ UCHAR ctrl;
+ UCHAR org[3];
+ UCHAR ethertype[2];
+} snaphdr_t;
+
+#define BRIDGE_ENCAP 0xf80000
+#define RFC1042_ENCAP 0
+#define SNAP_ID 0x0003aaaa
+#define RAY_IPX_TYPE 0x8137
+#define APPLEARP_TYPE 0x80f3
+/*****************************************************************************/
+#endif /* #ifndef RAYLINK_H */
diff --git a/drivers/net/wireless/strip.c b/drivers/net/wireless/strip.c
new file mode 100644
index 0000000..ec8cf29f
--- /dev/null
+++ b/drivers/net/wireless/strip.c
@@ -0,0 +1,2843 @@
+/*
+ * Copyright 1996 The Board of Trustees of The Leland Stanford
+ * Junior University. All Rights Reserved.
+ *
+ * Permission to use, copy, modify, and distribute this
+ * software and its documentation for any purpose and without
+ * fee is hereby granted, provided that the above copyright
+ * notice appear in all copies. Stanford University
+ * makes no representations about the suitability of this
+ * software for any purpose. It is provided "as is" without
+ * express or implied warranty.
+ *
+ * strip.c This module implements Starmode Radio IP (STRIP)
+ * for kernel-based devices like TTY. It interfaces between a
+ * raw TTY, and the kernel's INET protocol layers (via DDI).
+ *
+ * Version: @(#)strip.c 1.3 July 1997
+ *
+ * Author: Stuart Cheshire <cheshire@cs.stanford.edu>
+ *
+ * Fixes: v0.9 12th Feb 1996 (SC)
+ * New byte stuffing (2+6 run-length encoding)
+ * New watchdog timer task
+ * New Protocol key (SIP0)
+ *
+ * v0.9.1 3rd March 1996 (SC)
+ * Changed to dynamic device allocation -- no more compile
+ * time (or boot time) limit on the number of STRIP devices.
+ *
+ * v0.9.2 13th March 1996 (SC)
+ * Uses arp cache lookups (but doesn't send arp packets yet)
+ *
+ * v0.9.3 17th April 1996 (SC)
+ * Fixed bug where STR_ERROR flag was getting set unneccessarily
+ * (causing otherwise good packets to be unneccessarily dropped)
+ *
+ * v0.9.4 27th April 1996 (SC)
+ * First attempt at using "&COMMAND" Starmode AT commands
+ *
+ * v0.9.5 29th May 1996 (SC)
+ * First attempt at sending (unicast) ARP packets
+ *
+ * v0.9.6 5th June 1996 (Elliot)
+ * Put "message level" tags in every "printk" statement
+ *
+ * v0.9.7 13th June 1996 (laik)
+ * Added support for the /proc fs
+ *
+ * v0.9.8 July 1996 (Mema)
+ * Added packet logging
+ *
+ * v1.0 November 1996 (SC)
+ * Fixed (severe) memory leaks in the /proc fs code
+ * Fixed race conditions in the logging code
+ *
+ * v1.1 January 1997 (SC)
+ * Deleted packet logging (use tcpdump instead)
+ * Added support for Metricom Firmware v204 features
+ * (like message checksums)
+ *
+ * v1.2 January 1997 (SC)
+ * Put portables list back in
+ *
+ * v1.3 July 1997 (SC)
+ * Made STRIP driver set the radio's baud rate automatically.
+ * It is no longer necessarily to manually set the radio's
+ * rate permanently to 115200 -- the driver handles setting
+ * the rate automatically.
+ */
+
+#ifdef MODULE
+static const char StripVersion[] = "1.3A-STUART.CHESHIRE-MODULAR";
+#else
+static const char StripVersion[] = "1.3A-STUART.CHESHIRE";
+#endif
+
+#define TICKLE_TIMERS 0
+#define EXT_COUNTERS 1
+
+
+/************************************************************************/
+/* Header files */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/bitops.h>
+#include <asm/system.h>
+#include <asm/uaccess.h>
+
+# include <linux/ctype.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/interrupt.h>
+#include <linux/in.h>
+#include <linux/tty.h>
+#include <linux/errno.h>
+#include <linux/netdevice.h>
+#include <linux/inetdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/if_arp.h>
+#include <linux/if_strip.h>
+#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
+#include <linux/serial.h>
+#include <linux/serialP.h>
+#include <linux/rcupdate.h>
+#include <net/arp.h>
+
+#include <linux/ip.h>
+#include <linux/tcp.h>
+#include <linux/time.h>
+
+
+/************************************************************************/
+/* Useful structures and definitions */
+
+/*
+ * A MetricomKey identifies the protocol being carried inside a Metricom
+ * Starmode packet.
+ */
+
+typedef union {
+ __u8 c[4];
+ __u32 l;
+} MetricomKey;
+
+/*
+ * An IP address can be viewed as four bytes in memory (which is what it is) or as
+ * a single 32-bit long (which is convenient for assignment, equality testing etc.)
+ */
+
+typedef union {
+ __u8 b[4];
+ __u32 l;
+} IPaddr;
+
+/*
+ * A MetricomAddressString is used to hold a printable representation of
+ * a Metricom address.
+ */
+
+typedef struct {
+ __u8 c[24];
+} MetricomAddressString;
+
+/* Encapsulation can expand packet of size x to 65/64x + 1
+ * Sent packet looks like "<CR>*<address>*<key><encaps payload><CR>"
+ * 1 1 1-18 1 4 ? 1
+ * eg. <CR>*0000-1234*SIP0<encaps payload><CR>
+ * We allow 31 bytes for the stars, the key, the address and the <CR>s
+ */
+#define STRIP_ENCAP_SIZE(X) (32 + (X)*65L/64L)
+
+/*
+ * A STRIP_Header is never really sent over the radio, but making a dummy
+ * header for internal use within the kernel that looks like an Ethernet
+ * header makes certain other software happier. For example, tcpdump
+ * already understands Ethernet headers.
+ */
+
+typedef struct {
+ MetricomAddress dst_addr; /* Destination address, e.g. "0000-1234" */
+ MetricomAddress src_addr; /* Source address, e.g. "0000-5678" */
+ unsigned short protocol; /* The protocol type, using Ethernet codes */
+} STRIP_Header;
+
+typedef struct {
+ char c[60];
+} MetricomNode;
+
+#define NODE_TABLE_SIZE 32
+typedef struct {
+ struct timeval timestamp;
+ int num_nodes;
+ MetricomNode node[NODE_TABLE_SIZE];
+} MetricomNodeTable;
+
+enum { FALSE = 0, TRUE = 1 };
+
+/*
+ * Holds the radio's firmware version.
+ */
+typedef struct {
+ char c[50];
+} FirmwareVersion;
+
+/*
+ * Holds the radio's serial number.
+ */
+typedef struct {
+ char c[18];
+} SerialNumber;
+
+/*
+ * Holds the radio's battery voltage.
+ */
+typedef struct {
+ char c[11];
+} BatteryVoltage;
+
+typedef struct {
+ char c[8];
+} char8;
+
+enum {
+ NoStructure = 0, /* Really old firmware */
+ StructuredMessages = 1, /* Parsable AT response msgs */
+ ChecksummedMessages = 2 /* Parsable AT response msgs with checksums */
+} FirmwareLevel;
+
+struct strip {
+ int magic;
+ /*
+ * These are pointers to the malloc()ed frame buffers.
+ */
+
+ unsigned char *rx_buff; /* buffer for received IP packet */
+ unsigned char *sx_buff; /* buffer for received serial data */
+ int sx_count; /* received serial data counter */
+ int sx_size; /* Serial buffer size */
+ unsigned char *tx_buff; /* transmitter buffer */
+ unsigned char *tx_head; /* pointer to next byte to XMIT */
+ int tx_left; /* bytes left in XMIT queue */
+ int tx_size; /* Serial buffer size */
+
+ /*
+ * STRIP interface statistics.
+ */
+
+ unsigned long rx_packets; /* inbound frames counter */
+ unsigned long tx_packets; /* outbound frames counter */
+ unsigned long rx_errors; /* Parity, etc. errors */
+ unsigned long tx_errors; /* Planned stuff */
+ unsigned long rx_dropped; /* No memory for skb */
+ unsigned long tx_dropped; /* When MTU change */
+ unsigned long rx_over_errors; /* Frame bigger then STRIP buf. */
+
+ unsigned long pps_timer; /* Timer to determine pps */
+ unsigned long rx_pps_count; /* Counter to determine pps */
+ unsigned long tx_pps_count; /* Counter to determine pps */
+ unsigned long sx_pps_count; /* Counter to determine pps */
+ unsigned long rx_average_pps; /* rx packets per second * 8 */
+ unsigned long tx_average_pps; /* tx packets per second * 8 */
+ unsigned long sx_average_pps; /* sent packets per second * 8 */
+
+#ifdef EXT_COUNTERS
+ unsigned long rx_bytes; /* total received bytes */
+ unsigned long tx_bytes; /* total received bytes */
+ unsigned long rx_rbytes; /* bytes thru radio i/f */
+ unsigned long tx_rbytes; /* bytes thru radio i/f */
+ unsigned long rx_sbytes; /* tot bytes thru serial i/f */
+ unsigned long tx_sbytes; /* tot bytes thru serial i/f */
+ unsigned long rx_ebytes; /* tot stat/err bytes */
+ unsigned long tx_ebytes; /* tot stat/err bytes */
+#endif
+
+ /*
+ * Internal variables.
+ */
+
+ struct list_head list; /* Linked list of devices */
+
+ int discard; /* Set if serial error */
+ int working; /* Is radio working correctly? */
+ int firmware_level; /* Message structuring level */
+ int next_command; /* Next periodic command */
+ unsigned int user_baud; /* The user-selected baud rate */
+ int mtu; /* Our mtu (to spot changes!) */
+ long watchdog_doprobe; /* Next time to test the radio */
+ long watchdog_doreset; /* Time to do next reset */
+ long gratuitous_arp; /* Time to send next ARP refresh */
+ long arp_interval; /* Next ARP interval */
+ struct timer_list idle_timer; /* For periodic wakeup calls */
+ MetricomAddress true_dev_addr; /* True address of radio */
+ int manual_dev_addr; /* Hack: See note below */
+
+ FirmwareVersion firmware_version; /* The radio's firmware version */
+ SerialNumber serial_number; /* The radio's serial number */
+ BatteryVoltage battery_voltage; /* The radio's battery voltage */
+
+ /*
+ * Other useful structures.
+ */
+
+ struct tty_struct *tty; /* ptr to TTY structure */
+ struct net_device *dev; /* Our device structure */
+
+ /*
+ * Neighbour radio records
+ */
+
+ MetricomNodeTable portables;
+ MetricomNodeTable poletops;
+};
+
+/*
+ * Note: manual_dev_addr hack
+ *
+ * It is not possible to change the hardware address of a Metricom radio,
+ * or to send packets with a user-specified hardware source address, thus
+ * trying to manually set a hardware source address is a questionable
+ * thing to do. However, if the user *does* manually set the hardware
+ * source address of a STRIP interface, then the kernel will believe it,
+ * and use it in certain places. For example, the hardware address listed
+ * by ifconfig will be the manual address, not the true one.
+ * (Both addresses are listed in /proc/net/strip.)
+ * Also, ARP packets will be sent out giving the user-specified address as
+ * the source address, not the real address. This is dangerous, because
+ * it means you won't receive any replies -- the ARP replies will go to
+ * the specified address, which will be some other radio. The case where
+ * this is useful is when that other radio is also connected to the same
+ * machine. This allows you to connect a pair of radios to one machine,
+ * and to use one exclusively for inbound traffic, and the other
+ * exclusively for outbound traffic. Pretty neat, huh?
+ *
+ * Here's the full procedure to set this up:
+ *
+ * 1. "slattach" two interfaces, e.g. st0 for outgoing packets,
+ * and st1 for incoming packets
+ *
+ * 2. "ifconfig" st0 (outbound radio) to have the hardware address
+ * which is the real hardware address of st1 (inbound radio).
+ * Now when it sends out packets, it will masquerade as st1, and
+ * replies will be sent to that radio, which is exactly what we want.
+ *
+ * 3. Set the route table entry ("route add default ..." or
+ * "route add -net ...", as appropriate) to send packets via the st0
+ * interface (outbound radio). Do not add any route which sends packets
+ * out via the st1 interface -- that radio is for inbound traffic only.
+ *
+ * 4. "ifconfig" st1 (inbound radio) to have hardware address zero.
+ * This tells the STRIP driver to "shut down" that interface and not
+ * send any packets through it. In particular, it stops sending the
+ * periodic gratuitous ARP packets that a STRIP interface normally sends.
+ * Also, when packets arrive on that interface, it will search the
+ * interface list to see if there is another interface who's manual
+ * hardware address matches its own real address (i.e. st0 in this
+ * example) and if so it will transfer ownership of the skbuff to
+ * that interface, so that it looks to the kernel as if the packet
+ * arrived on that interface. This is necessary because when the
+ * kernel sends an ARP packet on st0, it expects to get a reply on
+ * st0, and if it sees the reply come from st1 then it will ignore
+ * it (to be accurate, it puts the entry in the ARP table, but
+ * labelled in such a way that st0 can't use it).
+ *
+ * Thanks to Petros Maniatis for coming up with the idea of splitting
+ * inbound and outbound traffic between two interfaces, which turned
+ * out to be really easy to implement, even if it is a bit of a hack.
+ *
+ * Having set a manual address on an interface, you can restore it
+ * to automatic operation (where the address is automatically kept
+ * consistent with the real address of the radio) by setting a manual
+ * address of all ones, e.g. "ifconfig st0 hw strip FFFFFFFFFFFF"
+ * This 'turns off' manual override mode for the device address.
+ *
+ * Note: The IEEE 802 headers reported in tcpdump will show the *real*
+ * radio addresses the packets were sent and received from, so that you
+ * can see what is really going on with packets, and which interfaces
+ * they are really going through.
+ */
+
+
+/************************************************************************/
+/* Constants */
+
+/*
+ * CommandString1 works on all radios
+ * Other CommandStrings are only used with firmware that provides structured responses.
+ *
+ * ats319=1 Enables Info message for node additions and deletions
+ * ats319=2 Enables Info message for a new best node
+ * ats319=4 Enables checksums
+ * ats319=8 Enables ACK messages
+ */
+
+static const int MaxCommandStringLength = 32;
+static const int CompatibilityCommand = 1;
+
+static const char CommandString0[] = "*&COMMAND*ATS319=7"; /* Turn on checksums & info messages */
+static const char CommandString1[] = "*&COMMAND*ATS305?"; /* Query radio name */
+static const char CommandString2[] = "*&COMMAND*ATS325?"; /* Query battery voltage */
+static const char CommandString3[] = "*&COMMAND*ATS300?"; /* Query version information */
+static const char CommandString4[] = "*&COMMAND*ATS311?"; /* Query poletop list */
+static const char CommandString5[] = "*&COMMAND*AT~LA"; /* Query portables list */
+typedef struct {
+ const char *string;
+ long length;
+} StringDescriptor;
+
+static const StringDescriptor CommandString[] = {
+ {CommandString0, sizeof(CommandString0) - 1},
+ {CommandString1, sizeof(CommandString1) - 1},
+ {CommandString2, sizeof(CommandString2) - 1},
+ {CommandString3, sizeof(CommandString3) - 1},
+ {CommandString4, sizeof(CommandString4) - 1},
+ {CommandString5, sizeof(CommandString5) - 1}
+};
+
+#define GOT_ALL_RADIO_INFO(S) \
+ ((S)->firmware_version.c[0] && \
+ (S)->battery_voltage.c[0] && \
+ memcmp(&(S)->true_dev_addr, zero_address.c, sizeof(zero_address)))
+
+static const char hextable[16] = "0123456789ABCDEF";
+
+static const MetricomAddress zero_address;
+static const MetricomAddress broadcast_address =
+ { {0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF} };
+
+static const MetricomKey SIP0Key = { "SIP0" };
+static const MetricomKey ARP0Key = { "ARP0" };
+static const MetricomKey ATR_Key = { "ATR " };
+static const MetricomKey ACK_Key = { "ACK_" };
+static const MetricomKey INF_Key = { "INF_" };
+static const MetricomKey ERR_Key = { "ERR_" };
+
+static const long MaxARPInterval = 60 * HZ; /* One minute */
+
+/*
+ * Maximum Starmode packet length is 1183 bytes. Allowing 4 bytes for
+ * protocol key, 4 bytes for checksum, one byte for CR, and 65/64 expansion
+ * for STRIP encoding, that translates to a maximum payload MTU of 1155.
+ * Note: A standard NFS 1K data packet is a total of 0x480 (1152) bytes
+ * long, including IP header, UDP header, and NFS header. Setting the STRIP
+ * MTU to 1152 allows us to send default sized NFS packets without fragmentation.
+ */
+static const unsigned short MAX_SEND_MTU = 1152;
+static const unsigned short MAX_RECV_MTU = 1500; /* Hoping for Ethernet sized packets in the future! */
+static const unsigned short DEFAULT_STRIP_MTU = 1152;
+static const int STRIP_MAGIC = 0x5303;
+static const long LongTime = 0x7FFFFFFF;
+
+/************************************************************************/
+/* Global variables */
+
+static LIST_HEAD(strip_list);
+static DEFINE_SPINLOCK(strip_lock);
+
+/************************************************************************/
+/* Macros */
+
+/* Returns TRUE if text T begins with prefix P */
+#define has_prefix(T,L,P) (((L) >= sizeof(P)-1) && !strncmp((T), (P), sizeof(P)-1))
+
+/* Returns TRUE if text T of length L is equal to string S */
+#define text_equal(T,L,S) (((L) == sizeof(S)-1) && !strncmp((T), (S), sizeof(S)-1))
+
+#define READHEX(X) ((X)>='0' && (X)<='9' ? (X)-'0' : \
+ (X)>='a' && (X)<='f' ? (X)-'a'+10 : \
+ (X)>='A' && (X)<='F' ? (X)-'A'+10 : 0 )
+
+#define READHEX16(X) ((__u16)(READHEX(X)))
+
+#define READDEC(X) ((X)>='0' && (X)<='9' ? (X)-'0' : 0)
+
+#define ARRAY_END(X) (&((X)[ARRAY_SIZE(X)]))
+
+#define JIFFIE_TO_SEC(X) ((X) / HZ)
+
+
+/************************************************************************/
+/* Utility routines */
+
+static int arp_query(unsigned char *haddr, u32 paddr,
+ struct net_device *dev)
+{
+ struct neighbour *neighbor_entry;
+
+ neighbor_entry = neigh_lookup(&arp_tbl, &paddr, dev);
+
+ if (neighbor_entry != NULL) {
+ neighbor_entry->used = jiffies;
+ if (neighbor_entry->nud_state & NUD_VALID) {
+ memcpy(haddr, neighbor_entry->ha, dev->addr_len);
+ return 1;
+ }
+ }
+ return 0;
+}
+
+static void DumpData(char *msg, struct strip *strip_info, __u8 * ptr,
+ __u8 * end)
+{
+ static const int MAX_DumpData = 80;
+ __u8 pkt_text[MAX_DumpData], *p = pkt_text;
+
+ *p++ = '\"';
+
+ while (ptr < end && p < &pkt_text[MAX_DumpData - 4]) {
+ if (*ptr == '\\') {
+ *p++ = '\\';
+ *p++ = '\\';
+ } else {
+ if (*ptr >= 32 && *ptr <= 126) {
+ *p++ = *ptr;
+ } else {
+ sprintf(p, "\\%02X", *ptr);
+ p += 3;
+ }
+ }
+ ptr++;
+ }
+
+ if (ptr == end)
+ *p++ = '\"';
+ *p++ = 0;
+
+ printk(KERN_INFO "%s: %-13s%s\n", strip_info->dev->name, msg, pkt_text);
+}
+
+
+/************************************************************************/
+/* Byte stuffing/unstuffing routines */
+
+/* Stuffing scheme:
+ * 00 Unused (reserved character)
+ * 01-3F Run of 2-64 different characters
+ * 40-7F Run of 1-64 different characters plus a single zero at the end
+ * 80-BF Run of 1-64 of the same character
+ * C0-FF Run of 1-64 zeroes (ASCII 0)
+ */
+
+typedef enum {
+ Stuff_Diff = 0x00,
+ Stuff_DiffZero = 0x40,
+ Stuff_Same = 0x80,
+ Stuff_Zero = 0xC0,
+ Stuff_NoCode = 0xFF, /* Special code, meaning no code selected */
+
+ Stuff_CodeMask = 0xC0,
+ Stuff_CountMask = 0x3F,
+ Stuff_MaxCount = 0x3F,
+ Stuff_Magic = 0x0D /* The value we are eliminating */
+} StuffingCode;
+
+/* StuffData encodes the data starting at "src" for "length" bytes.
+ * It writes it to the buffer pointed to by "dst" (which must be at least
+ * as long as 1 + 65/64 of the input length). The output may be up to 1.6%
+ * larger than the input for pathological input, but will usually be smaller.
+ * StuffData returns the new value of the dst pointer as its result.
+ * "code_ptr_ptr" points to a "__u8 *" which is used to hold encoding state
+ * between calls, allowing an encoded packet to be incrementally built up
+ * from small parts. On the first call, the "__u8 *" pointed to should be
+ * initialized to NULL; between subsequent calls the calling routine should
+ * leave the value alone and simply pass it back unchanged so that the
+ * encoder can recover its current state.
+ */
+
+#define StuffData_FinishBlock(X) \
+(*code_ptr = (X) ^ Stuff_Magic, code = Stuff_NoCode)
+
+static __u8 *StuffData(__u8 * src, __u32 length, __u8 * dst,
+ __u8 ** code_ptr_ptr)
+{
+ __u8 *end = src + length;
+ __u8 *code_ptr = *code_ptr_ptr;
+ __u8 code = Stuff_NoCode, count = 0;
+
+ if (!length)
+ return (dst);
+
+ if (code_ptr) {
+ /*
+ * Recover state from last call, if applicable
+ */
+ code = (*code_ptr ^ Stuff_Magic) & Stuff_CodeMask;
+ count = (*code_ptr ^ Stuff_Magic) & Stuff_CountMask;
+ }
+
+ while (src < end) {
+ switch (code) {
+ /* Stuff_NoCode: If no current code, select one */
+ case Stuff_NoCode:
+ /* Record where we're going to put this code */
+ code_ptr = dst++;
+ count = 0; /* Reset the count (zero means one instance) */
+ /* Tentatively start a new block */
+ if (*src == 0) {
+ code = Stuff_Zero;
+ src++;
+ } else {
+ code = Stuff_Same;
+ *dst++ = *src++ ^ Stuff_Magic;
+ }
+ /* Note: We optimistically assume run of same -- */
+ /* which will be fixed later in Stuff_Same */
+ /* if it turns out not to be true. */
+ break;
+
+ /* Stuff_Zero: We already have at least one zero encoded */
+ case Stuff_Zero:
+ /* If another zero, count it, else finish this code block */
+ if (*src == 0) {
+ count++;
+ src++;
+ } else {
+ StuffData_FinishBlock(Stuff_Zero + count);
+ }
+ break;
+
+ /* Stuff_Same: We already have at least one byte encoded */
+ case Stuff_Same:
+ /* If another one the same, count it */
+ if ((*src ^ Stuff_Magic) == code_ptr[1]) {
+ count++;
+ src++;
+ break;
+ }
+ /* else, this byte does not match this block. */
+ /* If we already have two or more bytes encoded, finish this code block */
+ if (count) {
+ StuffData_FinishBlock(Stuff_Same + count);
+ break;
+ }
+ /* else, we only have one so far, so switch to Stuff_Diff code */
+ code = Stuff_Diff;
+ /* and fall through to Stuff_Diff case below
+ * Note cunning cleverness here: case Stuff_Diff compares
+ * the current character with the previous two to see if it
+ * has a run of three the same. Won't this be an error if
+ * there aren't two previous characters stored to compare with?
+ * No. Because we know the current character is *not* the same
+ * as the previous one, the first test below will necessarily
+ * fail and the send half of the "if" won't be executed.
+ */
+
+ /* Stuff_Diff: We have at least two *different* bytes encoded */
+ case Stuff_Diff:
+ /* If this is a zero, must encode a Stuff_DiffZero, and begin a new block */
+ if (*src == 0) {
+ StuffData_FinishBlock(Stuff_DiffZero +
+ count);
+ }
+ /* else, if we have three in a row, it is worth starting a Stuff_Same block */
+ else if ((*src ^ Stuff_Magic) == dst[-1]
+ && dst[-1] == dst[-2]) {
+ /* Back off the last two characters we encoded */
+ code += count - 2;
+ /* Note: "Stuff_Diff + 0" is an illegal code */
+ if (code == Stuff_Diff + 0) {
+ code = Stuff_Same + 0;
+ }
+ StuffData_FinishBlock(code);
+ code_ptr = dst - 2;
+ /* dst[-1] already holds the correct value */
+ count = 2; /* 2 means three bytes encoded */
+ code = Stuff_Same;
+ }
+ /* else, another different byte, so add it to the block */
+ else {
+ *dst++ = *src ^ Stuff_Magic;
+ count++;
+ }
+ src++; /* Consume the byte */
+ break;
+ }
+ if (count == Stuff_MaxCount) {
+ StuffData_FinishBlock(code + count);
+ }
+ }
+ if (code == Stuff_NoCode) {
+ *code_ptr_ptr = NULL;
+ } else {
+ *code_ptr_ptr = code_ptr;
+ StuffData_FinishBlock(code + count);
+ }
+ return (dst);
+}
+
+/*
+ * UnStuffData decodes the data at "src", up to (but not including) "end".
+ * It writes the decoded data into the buffer pointed to by "dst", up to a
+ * maximum of "dst_length", and returns the new value of "src" so that a
+ * follow-on call can read more data, continuing from where the first left off.
+ *
+ * There are three types of results:
+ * 1. The source data runs out before extracting "dst_length" bytes:
+ * UnStuffData returns NULL to indicate failure.
+ * 2. The source data produces exactly "dst_length" bytes:
+ * UnStuffData returns new_src = end to indicate that all bytes were consumed.
+ * 3. "dst_length" bytes are extracted, with more remaining.
+ * UnStuffData returns new_src < end to indicate that there are more bytes
+ * to be read.
+ *
+ * Note: The decoding may be destructive, in that it may alter the source
+ * data in the process of decoding it (this is necessary to allow a follow-on
+ * call to resume correctly).
+ */
+
+static __u8 *UnStuffData(__u8 * src, __u8 * end, __u8 * dst,
+ __u32 dst_length)
+{
+ __u8 *dst_end = dst + dst_length;
+ /* Sanity check */
+ if (!src || !end || !dst || !dst_length)
+ return (NULL);
+ while (src < end && dst < dst_end) {
+ int count = (*src ^ Stuff_Magic) & Stuff_CountMask;
+ switch ((*src ^ Stuff_Magic) & Stuff_CodeMask) {
+ case Stuff_Diff:
+ if (src + 1 + count >= end)
+ return (NULL);
+ do {
+ *dst++ = *++src ^ Stuff_Magic;
+ }
+ while (--count >= 0 && dst < dst_end);
+ if (count < 0)
+ src += 1;
+ else {
+ if (count == 0)
+ *src = Stuff_Same ^ Stuff_Magic;
+ else
+ *src =
+ (Stuff_Diff +
+ count) ^ Stuff_Magic;
+ }
+ break;
+ case Stuff_DiffZero:
+ if (src + 1 + count >= end)
+ return (NULL);
+ do {
+ *dst++ = *++src ^ Stuff_Magic;
+ }
+ while (--count >= 0 && dst < dst_end);
+ if (count < 0)
+ *src = Stuff_Zero ^ Stuff_Magic;
+ else
+ *src =
+ (Stuff_DiffZero + count) ^ Stuff_Magic;
+ break;
+ case Stuff_Same:
+ if (src + 1 >= end)
+ return (NULL);
+ do {
+ *dst++ = src[1] ^ Stuff_Magic;
+ }
+ while (--count >= 0 && dst < dst_end);
+ if (count < 0)
+ src += 2;
+ else
+ *src = (Stuff_Same + count) ^ Stuff_Magic;
+ break;
+ case Stuff_Zero:
+ do {
+ *dst++ = 0;
+ }
+ while (--count >= 0 && dst < dst_end);
+ if (count < 0)
+ src += 1;
+ else
+ *src = (Stuff_Zero + count) ^ Stuff_Magic;
+ break;
+ }
+ }
+ if (dst < dst_end)
+ return (NULL);
+ else
+ return (src);
+}
+
+
+/************************************************************************/
+/* General routines for STRIP */
+
+/*
+ * get_baud returns the current baud rate, as one of the constants defined in
+ * termbits.h
+ * If the user has issued a baud rate override using the 'setserial' command
+ * and the logical current rate is set to 38.4, then the true baud rate
+ * currently in effect (57.6 or 115.2) is returned.
+ */
+static unsigned int get_baud(struct tty_struct *tty)
+{
+ if (!tty || !tty->termios)
+ return (0);
+ if ((tty->termios->c_cflag & CBAUD) == B38400 && tty->driver_data) {
+ struct async_struct *info =
+ (struct async_struct *) tty->driver_data;
+ if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
+ return (B57600);
+ if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
+ return (B115200);
+ }
+ return (tty->termios->c_cflag & CBAUD);
+}
+
+/*
+ * set_baud sets the baud rate to the rate defined by baudcode
+ * Note: The rate B38400 should be avoided, because the user may have
+ * issued a 'setserial' speed override to map that to a different speed.
+ * We could achieve a true rate of 38400 if we needed to by cancelling
+ * any user speed override that is in place, but that might annoy the
+ * user, so it is simplest to just avoid using 38400.
+ */
+static void set_baud(struct tty_struct *tty, unsigned int baudcode)
+{
+ struct termios old_termios = *(tty->termios);
+ tty->termios->c_cflag &= ~CBAUD; /* Clear the old baud setting */
+ tty->termios->c_cflag |= baudcode; /* Set the new baud setting */
+ tty->driver->set_termios(tty, &old_termios);
+}
+
+/*
+ * Convert a string to a Metricom Address.
+ */
+
+#define IS_RADIO_ADDRESS(p) ( \
+ isdigit((p)[0]) && isdigit((p)[1]) && isdigit((p)[2]) && isdigit((p)[3]) && \
+ (p)[4] == '-' && \
+ isdigit((p)[5]) && isdigit((p)[6]) && isdigit((p)[7]) && isdigit((p)[8]) )
+
+static int string_to_radio_address(MetricomAddress * addr, __u8 * p)
+{
+ if (!IS_RADIO_ADDRESS(p))
+ return (1);
+ addr->c[0] = 0;
+ addr->c[1] = 0;
+ addr->c[2] = READHEX(p[0]) << 4 | READHEX(p[1]);
+ addr->c[3] = READHEX(p[2]) << 4 | READHEX(p[3]);
+ addr->c[4] = READHEX(p[5]) << 4 | READHEX(p[6]);
+ addr->c[5] = READHEX(p[7]) << 4 | READHEX(p[8]);
+ return (0);
+}
+
+/*
+ * Convert a Metricom Address to a string.
+ */
+
+static __u8 *radio_address_to_string(const MetricomAddress * addr,
+ MetricomAddressString * p)
+{
+ sprintf(p->c, "%02X%02X-%02X%02X", addr->c[2], addr->c[3],
+ addr->c[4], addr->c[5]);
+ return (p->c);
+}
+
+/*
+ * Note: Must make sure sx_size is big enough to receive a stuffed
+ * MAX_RECV_MTU packet. Additionally, we also want to ensure that it's
+ * big enough to receive a large radio neighbour list (currently 4K).
+ */
+
+static int allocate_buffers(struct strip *strip_info, int mtu)
+{
+ struct net_device *dev = strip_info->dev;
+ int sx_size = max_t(int, STRIP_ENCAP_SIZE(MAX_RECV_MTU), 4096);
+ int tx_size = STRIP_ENCAP_SIZE(mtu) + MaxCommandStringLength;
+ __u8 *r = kmalloc(MAX_RECV_MTU, GFP_ATOMIC);
+ __u8 *s = kmalloc(sx_size, GFP_ATOMIC);
+ __u8 *t = kmalloc(tx_size, GFP_ATOMIC);
+ if (r && s && t) {
+ strip_info->rx_buff = r;
+ strip_info->sx_buff = s;
+ strip_info->tx_buff = t;
+ strip_info->sx_size = sx_size;
+ strip_info->tx_size = tx_size;
+ strip_info->mtu = dev->mtu = mtu;
+ return (1);
+ }
+ if (r)
+ kfree(r);
+ if (s)
+ kfree(s);
+ if (t)
+ kfree(t);
+ return (0);
+}
+
+/*
+ * MTU has been changed by the IP layer.
+ * We could be in
+ * an upcall from the tty driver, or in an ip packet queue.
+ */
+static int strip_change_mtu(struct net_device *dev, int new_mtu)
+{
+ struct strip *strip_info = netdev_priv(dev);
+ int old_mtu = strip_info->mtu;
+ unsigned char *orbuff = strip_info->rx_buff;
+ unsigned char *osbuff = strip_info->sx_buff;
+ unsigned char *otbuff = strip_info->tx_buff;
+
+ if (new_mtu > MAX_SEND_MTU) {
+ printk(KERN_ERR
+ "%s: MTU exceeds maximum allowable (%d), MTU change cancelled.\n",
+ strip_info->dev->name, MAX_SEND_MTU);
+ return -EINVAL;
+ }
+
+ spin_lock_bh(&strip_lock);
+ if (!allocate_buffers(strip_info, new_mtu)) {
+ printk(KERN_ERR "%s: unable to grow strip buffers, MTU change cancelled.\n",
+ strip_info->dev->name);
+ spin_unlock_bh(&strip_lock);
+ return -ENOMEM;
+ }
+
+ if (strip_info->sx_count) {
+ if (strip_info->sx_count <= strip_info->sx_size)
+ memcpy(strip_info->sx_buff, osbuff,
+ strip_info->sx_count);
+ else {
+ strip_info->discard = strip_info->sx_count;
+ strip_info->rx_over_errors++;
+ }
+ }
+
+ if (strip_info->tx_left) {
+ if (strip_info->tx_left <= strip_info->tx_size)
+ memcpy(strip_info->tx_buff, strip_info->tx_head,
+ strip_info->tx_left);
+ else {
+ strip_info->tx_left = 0;
+ strip_info->tx_dropped++;
+ }
+ }
+ strip_info->tx_head = strip_info->tx_buff;
+ spin_unlock_bh(&strip_lock);
+
+ printk(KERN_NOTICE "%s: strip MTU changed fom %d to %d.\n",
+ strip_info->dev->name, old_mtu, strip_info->mtu);
+
+ if (orbuff)
+ kfree(orbuff);
+ if (osbuff)
+ kfree(osbuff);
+ if (otbuff)
+ kfree(otbuff);
+
+ return 0;
+}
+
+static void strip_unlock(struct strip *strip_info)
+{
+ /*
+ * Set the timer to go off in one second.
+ */
+ strip_info->idle_timer.expires = jiffies + 1 * HZ;
+ add_timer(&strip_info->idle_timer);
+ netif_wake_queue(strip_info->dev);
+}
+
+
+
+/*
+ * If the time is in the near future, time_delta prints the number of
+ * seconds to go into the buffer and returns the address of the buffer.
+ * If the time is not in the near future, it returns the address of the
+ * string "Not scheduled" The buffer must be long enough to contain the
+ * ascii representation of the number plus 9 charactes for the " seconds"
+ * and the null character.
+ */
+#ifdef CONFIG_PROC_FS
+static char *time_delta(char buffer[], long time)
+{
+ time -= jiffies;
+ if (time > LongTime / 2)
+ return ("Not scheduled");
+ if (time < 0)
+ time = 0; /* Don't print negative times */
+ sprintf(buffer, "%ld seconds", time / HZ);
+ return (buffer);
+}
+
+/* get Nth element of the linked list */
+static struct strip *strip_get_idx(loff_t pos)
+{
+ struct list_head *l;
+ int i = 0;
+
+ list_for_each_rcu(l, &strip_list) {
+ if (pos == i)
+ return list_entry(l, struct strip, list);
+ ++i;
+ }
+ return NULL;
+}
+
+static void *strip_seq_start(struct seq_file *seq, loff_t *pos)
+{
+ rcu_read_lock();
+ return *pos ? strip_get_idx(*pos - 1) : SEQ_START_TOKEN;
+}
+
+static void *strip_seq_next(struct seq_file *seq, void *v, loff_t *pos)
+{
+ struct list_head *l;
+ struct strip *s;
+
+ ++*pos;
+ if (v == SEQ_START_TOKEN)
+ return strip_get_idx(1);
+
+ s = v;
+ l = &s->list;
+ list_for_each_continue_rcu(l, &strip_list) {
+ return list_entry(l, struct strip, list);
+ }
+ return NULL;
+}
+
+static void strip_seq_stop(struct seq_file *seq, void *v)
+{
+ rcu_read_unlock();
+}
+
+static void strip_seq_neighbours(struct seq_file *seq,
+ const MetricomNodeTable * table,
+ const char *title)
+{
+ /* We wrap this in a do/while loop, so if the table changes */
+ /* while we're reading it, we just go around and try again. */
+ struct timeval t;
+
+ do {
+ int i;
+ t = table->timestamp;
+ if (table->num_nodes)
+ seq_printf(seq, "\n %s\n", title);
+ for (i = 0; i < table->num_nodes; i++) {
+ MetricomNode node;
+
+ spin_lock_bh(&strip_lock);
+ node = table->node[i];
+ spin_unlock_bh(&strip_lock);
+ seq_printf(seq, " %s\n", node.c);
+ }
+ } while (table->timestamp.tv_sec != t.tv_sec
+ || table->timestamp.tv_usec != t.tv_usec);
+}
+
+/*
+ * This function prints radio status information via the seq_file
+ * interface. The interface takes care of buffer size and over
+ * run issues.
+ *
+ * The buffer in seq_file is PAGESIZE (4K)
+ * so this routine should never print more or it will get truncated.
+ * With the maximum of 32 portables and 32 poletops
+ * reported, the routine outputs 3107 bytes into the buffer.
+ */
+static void strip_seq_status_info(struct seq_file *seq,
+ const struct strip *strip_info)
+{
+ char temp[32];
+ MetricomAddressString addr_string;
+
+ /* First, we must copy all of our data to a safe place, */
+ /* in case a serial interrupt comes in and changes it. */
+ int tx_left = strip_info->tx_left;
+ unsigned long rx_average_pps = strip_info->rx_average_pps;
+ unsigned long tx_average_pps = strip_info->tx_average_pps;
+ unsigned long sx_average_pps = strip_info->sx_average_pps;
+ int working = strip_info->working;
+ int firmware_level = strip_info->firmware_level;
+ long watchdog_doprobe = strip_info->watchdog_doprobe;
+ long watchdog_doreset = strip_info->watchdog_doreset;
+ long gratuitous_arp = strip_info->gratuitous_arp;
+ long arp_interval = strip_info->arp_interval;
+ FirmwareVersion firmware_version = strip_info->firmware_version;
+ SerialNumber serial_number = strip_info->serial_number;
+ BatteryVoltage battery_voltage = strip_info->battery_voltage;
+ char *if_name = strip_info->dev->name;
+ MetricomAddress true_dev_addr = strip_info->true_dev_addr;
+ MetricomAddress dev_dev_addr =
+ *(MetricomAddress *) strip_info->dev->dev_addr;
+ int manual_dev_addr = strip_info->manual_dev_addr;
+#ifdef EXT_COUNTERS
+ unsigned long rx_bytes = strip_info->rx_bytes;
+ unsigned long tx_bytes = strip_info->tx_bytes;
+ unsigned long rx_rbytes = strip_info->rx_rbytes;
+ unsigned long tx_rbytes = strip_info->tx_rbytes;
+ unsigned long rx_sbytes = strip_info->rx_sbytes;
+ unsigned long tx_sbytes = strip_info->tx_sbytes;
+ unsigned long rx_ebytes = strip_info->rx_ebytes;
+ unsigned long tx_ebytes = strip_info->tx_ebytes;
+#endif
+
+ seq_printf(seq, "\nInterface name\t\t%s\n", if_name);
+ seq_printf(seq, " Radio working:\t\t%s\n", working ? "Yes" : "No");
+ radio_address_to_string(&true_dev_addr, &addr_string);
+ seq_printf(seq, " Radio address:\t\t%s\n", addr_string.c);
+ if (manual_dev_addr) {
+ radio_address_to_string(&dev_dev_addr, &addr_string);
+ seq_printf(seq, " Device address:\t%s\n", addr_string.c);
+ }
+ seq_printf(seq, " Firmware version:\t%s", !working ? "Unknown" :
+ !firmware_level ? "Should be upgraded" :
+ firmware_version.c);
+ if (firmware_level >= ChecksummedMessages)
+ seq_printf(seq, " (Checksums Enabled)");
+ seq_printf(seq, "\n");
+ seq_printf(seq, " Serial number:\t\t%s\n", serial_number.c);
+ seq_printf(seq, " Battery voltage:\t%s\n", battery_voltage.c);
+ seq_printf(seq, " Transmit queue (bytes):%d\n", tx_left);
+ seq_printf(seq, " Receive packet rate: %ld packets per second\n",
+ rx_average_pps / 8);
+ seq_printf(seq, " Transmit packet rate: %ld packets per second\n",
+ tx_average_pps / 8);
+ seq_printf(seq, " Sent packet rate: %ld packets per second\n",
+ sx_average_pps / 8);
+ seq_printf(seq, " Next watchdog probe:\t%s\n",
+ time_delta(temp, watchdog_doprobe));
+ seq_printf(seq, " Next watchdog reset:\t%s\n",
+ time_delta(temp, watchdog_doreset));
+ seq_printf(seq, " Next gratuitous ARP:\t");
+
+ if (!memcmp
+ (strip_info->dev->dev_addr, zero_address.c,
+ sizeof(zero_address)))
+ seq_printf(seq, "Disabled\n");
+ else {
+ seq_printf(seq, "%s\n", time_delta(temp, gratuitous_arp));
+ seq_printf(seq, " Next ARP interval:\t%ld seconds\n",
+ JIFFIE_TO_SEC(arp_interval));
+ }
+
+ if (working) {
+#ifdef EXT_COUNTERS
+ seq_printf(seq, "\n");
+ seq_printf(seq,
+ " Total bytes: \trx:\t%lu\ttx:\t%lu\n",
+ rx_bytes, tx_bytes);
+ seq_printf(seq,
+ " thru radio: \trx:\t%lu\ttx:\t%lu\n",
+ rx_rbytes, tx_rbytes);
+ seq_printf(seq,
+ " thru serial port: \trx:\t%lu\ttx:\t%lu\n",
+ rx_sbytes, tx_sbytes);
+ seq_printf(seq,
+ " Total stat/err bytes:\trx:\t%lu\ttx:\t%lu\n",
+ rx_ebytes, tx_ebytes);
+#endif
+ strip_seq_neighbours(seq, &strip_info->poletops,
+ "Poletops:");
+ strip_seq_neighbours(seq, &strip_info->portables,
+ "Portables:");
+ }
+}
+
+/*
+ * This function is exports status information from the STRIP driver through
+ * the /proc file system.
+ */
+static int strip_seq_show(struct seq_file *seq, void *v)
+{
+ if (v == SEQ_START_TOKEN)
+ seq_printf(seq, "strip_version: %s\n", StripVersion);
+ else
+ strip_seq_status_info(seq, (const struct strip *)v);
+ return 0;
+}
+
+
+static struct seq_operations strip_seq_ops = {
+ .start = strip_seq_start,
+ .next = strip_seq_next,
+ .stop = strip_seq_stop,
+ .show = strip_seq_show,
+};
+
+static int strip_seq_open(struct inode *inode, struct file *file)
+{
+ return seq_open(file, &strip_seq_ops);
+}
+
+static struct file_operations strip_seq_fops = {
+ .owner = THIS_MODULE,
+ .open = strip_seq_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = seq_release,
+};
+#endif
+
+
+
+/************************************************************************/
+/* Sending routines */
+
+static void ResetRadio(struct strip *strip_info)
+{
+ struct tty_struct *tty = strip_info->tty;
+ static const char init[] = "ate0q1dt**starmode\r**";
+ StringDescriptor s = { init, sizeof(init) - 1 };
+
+ /*
+ * If the radio isn't working anymore,
+ * we should clear the old status information.
+ */
+ if (strip_info->working) {
+ printk(KERN_INFO "%s: No response: Resetting radio.\n",
+ strip_info->dev->name);
+ strip_info->firmware_version.c[0] = '\0';
+ strip_info->serial_number.c[0] = '\0';
+ strip_info->battery_voltage.c[0] = '\0';
+ strip_info->portables.num_nodes = 0;
+ do_gettimeofday(&strip_info->portables.timestamp);
+ strip_info->poletops.num_nodes = 0;
+ do_gettimeofday(&strip_info->poletops.timestamp);
+ }
+
+ strip_info->pps_timer = jiffies;
+ strip_info->rx_pps_count = 0;
+ strip_info->tx_pps_count = 0;
+ strip_info->sx_pps_count = 0;
+ strip_info->rx_average_pps = 0;
+ strip_info->tx_average_pps = 0;
+ strip_info->sx_average_pps = 0;
+
+ /* Mark radio address as unknown */
+ *(MetricomAddress *) & strip_info->true_dev_addr = zero_address;
+ if (!strip_info->manual_dev_addr)
+ *(MetricomAddress *) strip_info->dev->dev_addr =
+ zero_address;
+ strip_info->working = FALSE;
+ strip_info->firmware_level = NoStructure;
+ strip_info->next_command = CompatibilityCommand;
+ strip_info->watchdog_doprobe = jiffies + 10 * HZ;
+ strip_info->watchdog_doreset = jiffies + 1 * HZ;
+
+ /* If the user has selected a baud rate above 38.4 see what magic we have to do */
+ if (strip_info->user_baud > B38400) {
+ /*
+ * Subtle stuff: Pay attention :-)
+ * If the serial port is currently at the user's selected (>38.4) rate,
+ * then we temporarily switch to 19.2 and issue the ATS304 command
+ * to tell the radio to switch to the user's selected rate.
+ * If the serial port is not currently at that rate, that means we just
+ * issued the ATS304 command last time through, so this time we restore
+ * the user's selected rate and issue the normal starmode reset string.
+ */
+ if (strip_info->user_baud == get_baud(tty)) {
+ static const char b0[] = "ate0q1s304=57600\r";
+ static const char b1[] = "ate0q1s304=115200\r";
+ static const StringDescriptor baudstring[2] =
+ { {b0, sizeof(b0) - 1}
+ , {b1, sizeof(b1) - 1}
+ };
+ set_baud(tty, B19200);
+ if (strip_info->user_baud == B57600)
+ s = baudstring[0];
+ else if (strip_info->user_baud == B115200)
+ s = baudstring[1];
+ else
+ s = baudstring[1]; /* For now */
+ } else
+ set_baud(tty, strip_info->user_baud);
+ }
+
+ tty->driver->write(tty, s.string, s.length);
+#ifdef EXT_COUNTERS
+ strip_info->tx_ebytes += s.length;
+#endif
+}
+
+/*
+ * Called by the driver when there's room for more data. If we have
+ * more packets to send, we send them here.
+ */
+
+static void strip_write_some_more(struct tty_struct *tty)
+{
+ struct strip *strip_info = (struct strip *) tty->disc_data;
+
+ /* First make sure we're connected. */
+ if (!strip_info || strip_info->magic != STRIP_MAGIC ||
+ !netif_running(strip_info->dev))
+ return;
+
+ if (strip_info->tx_left > 0) {
+ int num_written =
+ tty->driver->write(tty, strip_info->tx_head,
+ strip_info->tx_left);
+ strip_info->tx_left -= num_written;
+ strip_info->tx_head += num_written;
+#ifdef EXT_COUNTERS
+ strip_info->tx_sbytes += num_written;
+#endif
+ } else { /* Else start transmission of another packet */
+
+ tty->flags &= ~(1 << TTY_DO_WRITE_WAKEUP);
+ strip_unlock(strip_info);
+ }
+}
+
+static __u8 *add_checksum(__u8 * buffer, __u8 * end)
+{
+ __u16 sum = 0;
+ __u8 *p = buffer;
+ while (p < end)
+ sum += *p++;
+ end[3] = hextable[sum & 0xF];
+ sum >>= 4;
+ end[2] = hextable[sum & 0xF];
+ sum >>= 4;
+ end[1] = hextable[sum & 0xF];
+ sum >>= 4;
+ end[0] = hextable[sum & 0xF];
+ return (end + 4);
+}
+
+static unsigned char *strip_make_packet(unsigned char *buffer,
+ struct strip *strip_info,
+ struct sk_buff *skb)
+{
+ __u8 *ptr = buffer;
+ __u8 *stuffstate = NULL;
+ STRIP_Header *header = (STRIP_Header *) skb->data;
+ MetricomAddress haddr = header->dst_addr;
+ int len = skb->len - sizeof(STRIP_Header);
+ MetricomKey key;
+
+ /*HexDump("strip_make_packet", strip_info, skb->data, skb->data + skb->len); */
+
+ if (header->protocol == htons(ETH_P_IP))
+ key = SIP0Key;
+ else if (header->protocol == htons(ETH_P_ARP))
+ key = ARP0Key;
+ else {
+ printk(KERN_ERR
+ "%s: strip_make_packet: Unknown packet type 0x%04X\n",
+ strip_info->dev->name, ntohs(header->protocol));
+ return (NULL);
+ }
+
+ if (len > strip_info->mtu) {
+ printk(KERN_ERR
+ "%s: Dropping oversized transmit packet: %d bytes\n",
+ strip_info->dev->name, len);
+ return (NULL);
+ }
+
+ /*
+ * If we're sending to ourselves, discard the packet.
+ * (Metricom radios choke if they try to send a packet to their own address.)
+ */
+ if (!memcmp(haddr.c, strip_info->true_dev_addr.c, sizeof(haddr))) {
+ printk(KERN_ERR "%s: Dropping packet addressed to self\n",
+ strip_info->dev->name);
+ return (NULL);
+ }
+
+ /*
+ * If this is a broadcast packet, send it to our designated Metricom
+ * 'broadcast hub' radio (First byte of address being 0xFF means broadcast)
+ */
+ if (haddr.c[0] == 0xFF) {
+ u32 brd = 0;
+ struct in_device *in_dev;
+
+ rcu_read_lock();
+ in_dev = __in_dev_get(strip_info->dev);
+ if (in_dev == NULL) {
+ rcu_read_unlock();
+ return NULL;
+ }
+ if (in_dev->ifa_list)
+ brd = in_dev->ifa_list->ifa_broadcast;
+ rcu_read_unlock();
+
+ /* arp_query returns 1 if it succeeds in looking up the address, 0 if it fails */
+ if (!arp_query(haddr.c, brd, strip_info->dev)) {
+ printk(KERN_ERR
+ "%s: Unable to send packet (no broadcast hub configured)\n",
+ strip_info->dev->name);
+ return (NULL);
+ }
+ /*
+ * If we are the broadcast hub, don't bother sending to ourselves.
+ * (Metricom radios choke if they try to send a packet to their own address.)
+ */
+ if (!memcmp
+ (haddr.c, strip_info->true_dev_addr.c, sizeof(haddr)))
+ return (NULL);
+ }
+
+ *ptr++ = 0x0D;
+ *ptr++ = '*';
+ *ptr++ = hextable[haddr.c[2] >> 4];
+ *ptr++ = hextable[haddr.c[2] & 0xF];
+ *ptr++ = hextable[haddr.c[3] >> 4];
+ *ptr++ = hextable[haddr.c[3] & 0xF];
+ *ptr++ = '-';
+ *ptr++ = hextable[haddr.c[4] >> 4];
+ *ptr++ = hextable[haddr.c[4] & 0xF];
+ *ptr++ = hextable[haddr.c[5] >> 4];
+ *ptr++ = hextable[haddr.c[5] & 0xF];
+ *ptr++ = '*';
+ *ptr++ = key.c[0];
+ *ptr++ = key.c[1];
+ *ptr++ = key.c[2];
+ *ptr++ = key.c[3];
+
+ ptr =
+ StuffData(skb->data + sizeof(STRIP_Header), len, ptr,
+ &stuffstate);
+
+ if (strip_info->firmware_level >= ChecksummedMessages)
+ ptr = add_checksum(buffer + 1, ptr);
+
+ *ptr++ = 0x0D;
+ return (ptr);
+}
+
+static void strip_send(struct strip *strip_info, struct sk_buff *skb)
+{
+ MetricomAddress haddr;
+ unsigned char *ptr = strip_info->tx_buff;
+ int doreset = (long) jiffies - strip_info->watchdog_doreset >= 0;
+ int doprobe = (long) jiffies - strip_info->watchdog_doprobe >= 0
+ && !doreset;
+ u32 addr, brd;
+
+ /*
+ * 1. If we have a packet, encapsulate it and put it in the buffer
+ */
+ if (skb) {
+ char *newptr = strip_make_packet(ptr, strip_info, skb);
+ strip_info->tx_pps_count++;
+ if (!newptr)
+ strip_info->tx_dropped++;
+ else {
+ ptr = newptr;
+ strip_info->sx_pps_count++;
+ strip_info->tx_packets++; /* Count another successful packet */
+#ifdef EXT_COUNTERS
+ strip_info->tx_bytes += skb->len;
+ strip_info->tx_rbytes += ptr - strip_info->tx_buff;
+#endif
+ /*DumpData("Sending:", strip_info, strip_info->tx_buff, ptr); */
+ /*HexDump("Sending", strip_info, strip_info->tx_buff, ptr); */
+ }
+ }
+
+ /*
+ * 2. If it is time for another tickle, tack it on, after the packet
+ */
+ if (doprobe) {
+ StringDescriptor ts = CommandString[strip_info->next_command];
+#if TICKLE_TIMERS
+ {
+ struct timeval tv;
+ do_gettimeofday(&tv);
+ printk(KERN_INFO "**** Sending tickle string %d at %02d.%06d\n",
+ strip_info->next_command, tv.tv_sec % 100,
+ tv.tv_usec);
+ }
+#endif
+ if (ptr == strip_info->tx_buff)
+ *ptr++ = 0x0D;
+
+ *ptr++ = '*'; /* First send "**" to provoke an error message */
+ *ptr++ = '*';
+
+ /* Then add the command */
+ memcpy(ptr, ts.string, ts.length);
+
+ /* Add a checksum ? */
+ if (strip_info->firmware_level < ChecksummedMessages)
+ ptr += ts.length;
+ else
+ ptr = add_checksum(ptr, ptr + ts.length);
+
+ *ptr++ = 0x0D; /* Terminate the command with a <CR> */
+
+ /* Cycle to next periodic command? */
+ if (strip_info->firmware_level >= StructuredMessages)
+ if (++strip_info->next_command >=
+ ARRAY_SIZE(CommandString))
+ strip_info->next_command = 0;
+#ifdef EXT_COUNTERS
+ strip_info->tx_ebytes += ts.length;
+#endif
+ strip_info->watchdog_doprobe = jiffies + 10 * HZ;
+ strip_info->watchdog_doreset = jiffies + 1 * HZ;
+ /*printk(KERN_INFO "%s: Routine radio test.\n", strip_info->dev->name); */
+ }
+
+ /*
+ * 3. Set up the strip_info ready to send the data (if any).
+ */
+ strip_info->tx_head = strip_info->tx_buff;
+ strip_info->tx_left = ptr - strip_info->tx_buff;
+ strip_info->tty->flags |= (1 << TTY_DO_WRITE_WAKEUP);
+
+ /*
+ * 4. Debugging check to make sure we're not overflowing the buffer.
+ */
+ if (strip_info->tx_size - strip_info->tx_left < 20)
+ printk(KERN_ERR "%s: Sending%5d bytes;%5d bytes free.\n",
+ strip_info->dev->name, strip_info->tx_left,
+ strip_info->tx_size - strip_info->tx_left);
+
+ /*
+ * 5. If watchdog has expired, reset the radio. Note: if there's data waiting in
+ * the buffer, strip_write_some_more will send it after the reset has finished
+ */
+ if (doreset) {
+ ResetRadio(strip_info);
+ return;
+ }
+
+ if (1) {
+ struct in_device *in_dev;
+
+ brd = addr = 0;
+ rcu_read_lock();
+ in_dev = __in_dev_get(strip_info->dev);
+ if (in_dev) {
+ if (in_dev->ifa_list) {
+ brd = in_dev->ifa_list->ifa_broadcast;
+ addr = in_dev->ifa_list->ifa_local;
+ }
+ }
+ rcu_read_unlock();
+ }
+
+
+ /*
+ * 6. If it is time for a periodic ARP, queue one up to be sent.
+ * We only do this if:
+ * 1. The radio is working
+ * 2. It's time to send another periodic ARP
+ * 3. We really know what our address is (and it is not manually set to zero)
+ * 4. We have a designated broadcast address configured
+ * If we queue up an ARP packet when we don't have a designated broadcast
+ * address configured, then the packet will just have to be discarded in
+ * strip_make_packet. This is not fatal, but it causes misleading information
+ * to be displayed in tcpdump. tcpdump will report that periodic APRs are
+ * being sent, when in fact they are not, because they are all being dropped
+ * in the strip_make_packet routine.
+ */
+ if (strip_info->working
+ && (long) jiffies - strip_info->gratuitous_arp >= 0
+ && memcmp(strip_info->dev->dev_addr, zero_address.c,
+ sizeof(zero_address))
+ && arp_query(haddr.c, brd, strip_info->dev)) {
+ /*printk(KERN_INFO "%s: Sending gratuitous ARP with interval %ld\n",
+ strip_info->dev->name, strip_info->arp_interval / HZ); */
+ strip_info->gratuitous_arp =
+ jiffies + strip_info->arp_interval;
+ strip_info->arp_interval *= 2;
+ if (strip_info->arp_interval > MaxARPInterval)
+ strip_info->arp_interval = MaxARPInterval;
+ if (addr)
+ arp_send(ARPOP_REPLY, ETH_P_ARP, addr, /* Target address of ARP packet is our address */
+ strip_info->dev, /* Device to send packet on */
+ addr, /* Source IP address this ARP packet comes from */
+ NULL, /* Destination HW address is NULL (broadcast it) */
+ strip_info->dev->dev_addr, /* Source HW address is our HW address */
+ strip_info->dev->dev_addr); /* Target HW address is our HW address (redundant) */
+ }
+
+ /*
+ * 7. All ready. Start the transmission
+ */
+ strip_write_some_more(strip_info->tty);
+}
+
+/* Encapsulate a datagram and kick it into a TTY queue. */
+static int strip_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+ struct strip *strip_info = netdev_priv(dev);
+
+ if (!netif_running(dev)) {
+ printk(KERN_ERR "%s: xmit call when iface is down\n",
+ dev->name);
+ return (1);
+ }
+
+ netif_stop_queue(dev);
+
+ del_timer(&strip_info->idle_timer);
+
+
+ if (jiffies - strip_info->pps_timer > HZ) {
+ unsigned long t = jiffies - strip_info->pps_timer;
+ unsigned long rx_pps_count = (strip_info->rx_pps_count * HZ * 8 + t / 2) / t;
+ unsigned long tx_pps_count = (strip_info->tx_pps_count * HZ * 8 + t / 2) / t;
+ unsigned long sx_pps_count = (strip_info->sx_pps_count * HZ * 8 + t / 2) / t;
+
+ strip_info->pps_timer = jiffies;
+ strip_info->rx_pps_count = 0;
+ strip_info->tx_pps_count = 0;
+ strip_info->sx_pps_count = 0;
+
+ strip_info->rx_average_pps = (strip_info->rx_average_pps + rx_pps_count + 1) / 2;
+ strip_info->tx_average_pps = (strip_info->tx_average_pps + tx_pps_count + 1) / 2;
+ strip_info->sx_average_pps = (strip_info->sx_average_pps + sx_pps_count + 1) / 2;
+
+ if (rx_pps_count / 8 >= 10)
+ printk(KERN_INFO "%s: WARNING: Receiving %ld packets per second.\n",
+ strip_info->dev->name, rx_pps_count / 8);
+ if (tx_pps_count / 8 >= 10)
+ printk(KERN_INFO "%s: WARNING: Tx %ld packets per second.\n",
+ strip_info->dev->name, tx_pps_count / 8);
+ if (sx_pps_count / 8 >= 10)
+ printk(KERN_INFO "%s: WARNING: Sending %ld packets per second.\n",
+ strip_info->dev->name, sx_pps_count / 8);
+ }
+
+ spin_lock_bh(&strip_lock);
+
+ strip_send(strip_info, skb);
+
+ spin_unlock_bh(&strip_lock);
+
+ if (skb)
+ dev_kfree_skb(skb);
+ return 0;
+}
+
+/*
+ * IdleTask periodically calls strip_xmit, so even when we have no IP packets
+ * to send for an extended period of time, the watchdog processing still gets
+ * done to ensure that the radio stays in Starmode
+ */
+
+static void strip_IdleTask(unsigned long parameter)
+{
+ strip_xmit(NULL, (struct net_device *) parameter);
+}
+
+/*
+ * Create the MAC header for an arbitrary protocol layer
+ *
+ * saddr!=NULL means use this specific address (n/a for Metricom)
+ * saddr==NULL means use default device source address
+ * daddr!=NULL means use this destination address
+ * daddr==NULL means leave destination address alone
+ * (e.g. unresolved arp -- kernel will call
+ * rebuild_header later to fill in the address)
+ */
+
+static int strip_header(struct sk_buff *skb, struct net_device *dev,
+ unsigned short type, void *daddr, void *saddr,
+ unsigned len)
+{
+ struct strip *strip_info = netdev_priv(dev);
+ STRIP_Header *header = (STRIP_Header *) skb_push(skb, sizeof(STRIP_Header));
+
+ /*printk(KERN_INFO "%s: strip_header 0x%04X %s\n", dev->name, type,
+ type == ETH_P_IP ? "IP" : type == ETH_P_ARP ? "ARP" : ""); */
+
+ header->src_addr = strip_info->true_dev_addr;
+ header->protocol = htons(type);
+
+ /*HexDump("strip_header", netdev_priv(dev), skb->data, skb->data + skb->len); */
+
+ if (!daddr)
+ return (-dev->hard_header_len);
+
+ header->dst_addr = *(MetricomAddress *) daddr;
+ return (dev->hard_header_len);
+}
+
+/*
+ * Rebuild the MAC header. This is called after an ARP
+ * (or in future other address resolution) has completed on this
+ * sk_buff. We now let ARP fill in the other fields.
+ * I think this should return zero if packet is ready to send,
+ * or non-zero if it needs more time to do an address lookup
+ */
+
+static int strip_rebuild_header(struct sk_buff *skb)
+{
+#ifdef CONFIG_INET
+ STRIP_Header *header = (STRIP_Header *) skb->data;
+
+ /* Arp find returns zero if if knows the address, */
+ /* or if it doesn't know the address it sends an ARP packet and returns non-zero */
+ return arp_find(header->dst_addr.c, skb) ? 1 : 0;
+#else
+ return 0;
+#endif
+}
+
+
+/************************************************************************/
+/* Receiving routines */
+
+static int strip_receive_room(struct tty_struct *tty)
+{
+ return 0x10000; /* We can handle an infinite amount of data. :-) */
+}
+
+/*
+ * This function parses the response to the ATS300? command,
+ * extracting the radio version and serial number.
+ */
+static void get_radio_version(struct strip *strip_info, __u8 * ptr, __u8 * end)
+{
+ __u8 *p, *value_begin, *value_end;
+ int len;
+
+ /* Determine the beginning of the second line of the payload */
+ p = ptr;
+ while (p < end && *p != 10)
+ p++;
+ if (p >= end)
+ return;
+ p++;
+ value_begin = p;
+
+ /* Determine the end of line */
+ while (p < end && *p != 10)
+ p++;
+ if (p >= end)
+ return;
+ value_end = p;
+ p++;
+
+ len = value_end - value_begin;
+ len = min_t(int, len, sizeof(FirmwareVersion) - 1);
+ if (strip_info->firmware_version.c[0] == 0)
+ printk(KERN_INFO "%s: Radio Firmware: %.*s\n",
+ strip_info->dev->name, len, value_begin);
+ sprintf(strip_info->firmware_version.c, "%.*s", len, value_begin);
+
+ /* Look for the first colon */
+ while (p < end && *p != ':')
+ p++;
+ if (p >= end)
+ return;
+ /* Skip over the space */
+ p += 2;
+ len = sizeof(SerialNumber) - 1;
+ if (p + len <= end) {
+ sprintf(strip_info->serial_number.c, "%.*s", len, p);
+ } else {
+ printk(KERN_DEBUG
+ "STRIP: radio serial number shorter (%zd) than expected (%d)\n",
+ end - p, len);
+ }
+}
+
+/*
+ * This function parses the response to the ATS325? command,
+ * extracting the radio battery voltage.
+ */
+static void get_radio_voltage(struct strip *strip_info, __u8 * ptr, __u8 * end)
+{
+ int len;
+
+ len = sizeof(BatteryVoltage) - 1;
+ if (ptr + len <= end) {
+ sprintf(strip_info->battery_voltage.c, "%.*s", len, ptr);
+ } else {
+ printk(KERN_DEBUG
+ "STRIP: radio voltage string shorter (%zd) than expected (%d)\n",
+ end - ptr, len);
+ }
+}
+
+/*
+ * This function parses the responses to the AT~LA and ATS311 commands,
+ * which list the radio's neighbours.
+ */
+static void get_radio_neighbours(MetricomNodeTable * table, __u8 * ptr, __u8 * end)
+{
+ table->num_nodes = 0;
+ while (ptr < end && table->num_nodes < NODE_TABLE_SIZE) {
+ MetricomNode *node = &table->node[table->num_nodes++];
+ char *dst = node->c, *limit = dst + sizeof(*node) - 1;
+ while (ptr < end && *ptr <= 32)
+ ptr++;
+ while (ptr < end && dst < limit && *ptr != 10)
+ *dst++ = *ptr++;
+ *dst++ = 0;
+ while (ptr < end && ptr[-1] != 10)
+ ptr++;
+ }
+ do_gettimeofday(&table->timestamp);
+}
+
+static int get_radio_address(struct strip *strip_info, __u8 * p)
+{
+ MetricomAddress addr;
+
+ if (string_to_radio_address(&addr, p))
+ return (1);
+
+ /* See if our radio address has changed */
+ if (memcmp(strip_info->true_dev_addr.c, addr.c, sizeof(addr))) {
+ MetricomAddressString addr_string;
+ radio_address_to_string(&addr, &addr_string);
+ printk(KERN_INFO "%s: Radio address = %s\n",
+ strip_info->dev->name, addr_string.c);
+ strip_info->true_dev_addr = addr;
+ if (!strip_info->manual_dev_addr)
+ *(MetricomAddress *) strip_info->dev->dev_addr =
+ addr;
+ /* Give the radio a few seconds to get its head straight, then send an arp */
+ strip_info->gratuitous_arp = jiffies + 15 * HZ;
+ strip_info->arp_interval = 1 * HZ;
+ }
+ return (0);
+}
+
+static int verify_checksum(struct strip *strip_info)
+{
+ __u8 *p = strip_info->sx_buff;
+ __u8 *end = strip_info->sx_buff + strip_info->sx_count - 4;
+ u_short sum =
+ (READHEX16(end[0]) << 12) | (READHEX16(end[1]) << 8) |
+ (READHEX16(end[2]) << 4) | (READHEX16(end[3]));
+ while (p < end)
+ sum -= *p++;
+ if (sum == 0 && strip_info->firmware_level == StructuredMessages) {
+ strip_info->firmware_level = ChecksummedMessages;
+ printk(KERN_INFO "%s: Radio provides message checksums\n",
+ strip_info->dev->name);
+ }
+ return (sum == 0);
+}
+
+static void RecvErr(char *msg, struct strip *strip_info)
+{
+ __u8 *ptr = strip_info->sx_buff;
+ __u8 *end = strip_info->sx_buff + strip_info->sx_count;
+ DumpData(msg, strip_info, ptr, end);
+ strip_info->rx_errors++;
+}
+
+static void RecvErr_Message(struct strip *strip_info, __u8 * sendername,
+ const __u8 * msg, u_long len)
+{
+ if (has_prefix(msg, len, "001")) { /* Not in StarMode! */
+ RecvErr("Error Msg:", strip_info);
+ printk(KERN_INFO "%s: Radio %s is not in StarMode\n",
+ strip_info->dev->name, sendername);
+ }
+
+ else if (has_prefix(msg, len, "002")) { /* Remap handle */
+ /* We ignore "Remap handle" messages for now */
+ }
+
+ else if (has_prefix(msg, len, "003")) { /* Can't resolve name */
+ RecvErr("Error Msg:", strip_info);
+ printk(KERN_INFO "%s: Destination radio name is unknown\n",
+ strip_info->dev->name);
+ }
+
+ else if (has_prefix(msg, len, "004")) { /* Name too small or missing */
+ strip_info->watchdog_doreset = jiffies + LongTime;
+#if TICKLE_TIMERS
+ {
+ struct timeval tv;
+ do_gettimeofday(&tv);
+ printk(KERN_INFO
+ "**** Got ERR_004 response at %02d.%06d\n",
+ tv.tv_sec % 100, tv.tv_usec);
+ }
+#endif
+ if (!strip_info->working) {
+ strip_info->working = TRUE;
+ printk(KERN_INFO "%s: Radio now in starmode\n",
+ strip_info->dev->name);
+ /*
+ * If the radio has just entered a working state, we should do our first
+ * probe ASAP, so that we find out our radio address etc. without delay.
+ */
+ strip_info->watchdog_doprobe = jiffies;
+ }
+ if (strip_info->firmware_level == NoStructure && sendername) {
+ strip_info->firmware_level = StructuredMessages;
+ strip_info->next_command = 0; /* Try to enable checksums ASAP */
+ printk(KERN_INFO
+ "%s: Radio provides structured messages\n",
+ strip_info->dev->name);
+ }
+ if (strip_info->firmware_level >= StructuredMessages) {
+ /*
+ * If this message has a valid checksum on the end, then the call to verify_checksum
+ * will elevate the firmware_level to ChecksummedMessages for us. (The actual return
+ * code from verify_checksum is ignored here.)
+ */
+ verify_checksum(strip_info);
+ /*
+ * If the radio has structured messages but we don't yet have all our information about it,
+ * we should do probes without delay, until we have gathered all the information
+ */
+ if (!GOT_ALL_RADIO_INFO(strip_info))
+ strip_info->watchdog_doprobe = jiffies;
+ }
+ }
+
+ else if (has_prefix(msg, len, "005")) /* Bad count specification */
+ RecvErr("Error Msg:", strip_info);
+
+ else if (has_prefix(msg, len, "006")) /* Header too big */
+ RecvErr("Error Msg:", strip_info);
+
+ else if (has_prefix(msg, len, "007")) { /* Body too big */
+ RecvErr("Error Msg:", strip_info);
+ printk(KERN_ERR
+ "%s: Error! Packet size too big for radio.\n",
+ strip_info->dev->name);
+ }
+
+ else if (has_prefix(msg, len, "008")) { /* Bad character in name */
+ RecvErr("Error Msg:", strip_info);
+ printk(KERN_ERR
+ "%s: Radio name contains illegal character\n",
+ strip_info->dev->name);
+ }
+
+ else if (has_prefix(msg, len, "009")) /* No count or line terminator */
+ RecvErr("Error Msg:", strip_info);
+
+ else if (has_prefix(msg, len, "010")) /* Invalid checksum */
+ RecvErr("Error Msg:", strip_info);
+
+ else if (has_prefix(msg, len, "011")) /* Checksum didn't match */
+ RecvErr("Error Msg:", strip_info);
+
+ else if (has_prefix(msg, len, "012")) /* Failed to transmit packet */
+ RecvErr("Error Msg:", strip_info);
+
+ else
+ RecvErr("Error Msg:", strip_info);
+}
+
+static void process_AT_response(struct strip *strip_info, __u8 * ptr,
+ __u8 * end)
+{
+ u_long len;
+ __u8 *p = ptr;
+ while (p < end && p[-1] != 10)
+ p++; /* Skip past first newline character */
+ /* Now ptr points to the AT command, and p points to the text of the response. */
+ len = p - ptr;
+
+#if TICKLE_TIMERS
+ {
+ struct timeval tv;
+ do_gettimeofday(&tv);
+ printk(KERN_INFO "**** Got AT response %.7s at %02d.%06d\n",
+ ptr, tv.tv_sec % 100, tv.tv_usec);
+ }
+#endif
+
+ if (has_prefix(ptr, len, "ATS300?"))
+ get_radio_version(strip_info, p, end);
+ else if (has_prefix(ptr, len, "ATS305?"))
+ get_radio_address(strip_info, p);
+ else if (has_prefix(ptr, len, "ATS311?"))
+ get_radio_neighbours(&strip_info->poletops, p, end);
+ else if (has_prefix(ptr, len, "ATS319=7"))
+ verify_checksum(strip_info);
+ else if (has_prefix(ptr, len, "ATS325?"))
+ get_radio_voltage(strip_info, p, end);
+ else if (has_prefix(ptr, len, "AT~LA"))
+ get_radio_neighbours(&strip_info->portables, p, end);
+ else
+ RecvErr("Unknown AT Response:", strip_info);
+}
+
+static void process_ACK(struct strip *strip_info, __u8 * ptr, __u8 * end)
+{
+ /* Currently we don't do anything with ACKs from the radio */
+}
+
+static void process_Info(struct strip *strip_info, __u8 * ptr, __u8 * end)
+{
+ if (ptr + 16 > end)
+ RecvErr("Bad Info Msg:", strip_info);
+}
+
+static struct net_device *get_strip_dev(struct strip *strip_info)
+{
+ /* If our hardware address is *manually set* to zero, and we know our */
+ /* real radio hardware address, try to find another strip device that has been */
+ /* manually set to that address that we can 'transfer ownership' of this packet to */
+ if (strip_info->manual_dev_addr &&
+ !memcmp(strip_info->dev->dev_addr, zero_address.c,
+ sizeof(zero_address))
+ && memcmp(&strip_info->true_dev_addr, zero_address.c,
+ sizeof(zero_address))) {
+ struct net_device *dev;
+ read_lock_bh(&dev_base_lock);
+ dev = dev_base;
+ while (dev) {
+ if (dev->type == strip_info->dev->type &&
+ !memcmp(dev->dev_addr,
+ &strip_info->true_dev_addr,
+ sizeof(MetricomAddress))) {
+ printk(KERN_INFO
+ "%s: Transferred packet ownership to %s.\n",
+ strip_info->dev->name, dev->name);
+ read_unlock_bh(&dev_base_lock);
+ return (dev);
+ }
+ dev = dev->next;
+ }
+ read_unlock_bh(&dev_base_lock);
+ }
+ return (strip_info->dev);
+}
+
+/*
+ * Send one completely decapsulated datagram to the next layer.
+ */
+
+static void deliver_packet(struct strip *strip_info, STRIP_Header * header,
+ __u16 packetlen)
+{
+ struct sk_buff *skb = dev_alloc_skb(sizeof(STRIP_Header) + packetlen);
+ if (!skb) {
+ printk(KERN_ERR "%s: memory squeeze, dropping packet.\n",
+ strip_info->dev->name);
+ strip_info->rx_dropped++;
+ } else {
+ memcpy(skb_put(skb, sizeof(STRIP_Header)), header,
+ sizeof(STRIP_Header));
+ memcpy(skb_put(skb, packetlen), strip_info->rx_buff,
+ packetlen);
+ skb->dev = get_strip_dev(strip_info);
+ skb->protocol = header->protocol;
+ skb->mac.raw = skb->data;
+
+ /* Having put a fake header on the front of the sk_buff for the */
+ /* benefit of tools like tcpdump, skb_pull now 'consumes' that */
+ /* fake header before we hand the packet up to the next layer. */
+ skb_pull(skb, sizeof(STRIP_Header));
+
+ /* Finally, hand the packet up to the next layer (e.g. IP or ARP, etc.) */
+ strip_info->rx_packets++;
+ strip_info->rx_pps_count++;
+#ifdef EXT_COUNTERS
+ strip_info->rx_bytes += packetlen;
+#endif
+ skb->dev->last_rx = jiffies;
+ netif_rx(skb);
+ }
+}
+
+static void process_IP_packet(struct strip *strip_info,
+ STRIP_Header * header, __u8 * ptr,
+ __u8 * end)
+{
+ __u16 packetlen;
+
+ /* Decode start of the IP packet header */
+ ptr = UnStuffData(ptr, end, strip_info->rx_buff, 4);
+ if (!ptr) {
+ RecvErr("IP Packet too short", strip_info);
+ return;
+ }
+
+ packetlen = ((__u16) strip_info->rx_buff[2] << 8) | strip_info->rx_buff[3];
+
+ if (packetlen > MAX_RECV_MTU) {
+ printk(KERN_INFO "%s: Dropping oversized received IP packet: %d bytes\n",
+ strip_info->dev->name, packetlen);
+ strip_info->rx_dropped++;
+ return;
+ }
+
+ /*printk(KERN_INFO "%s: Got %d byte IP packet\n", strip_info->dev->name, packetlen); */
+
+ /* Decode remainder of the IP packet */
+ ptr =
+ UnStuffData(ptr, end, strip_info->rx_buff + 4, packetlen - 4);
+ if (!ptr) {
+ RecvErr("IP Packet too short", strip_info);
+ return;
+ }
+
+ if (ptr < end) {
+ RecvErr("IP Packet too long", strip_info);
+ return;
+ }
+
+ header->protocol = htons(ETH_P_IP);
+
+ deliver_packet(strip_info, header, packetlen);
+}
+
+static void process_ARP_packet(struct strip *strip_info,
+ STRIP_Header * header, __u8 * ptr,
+ __u8 * end)
+{
+ __u16 packetlen;
+ struct arphdr *arphdr = (struct arphdr *) strip_info->rx_buff;
+
+ /* Decode start of the ARP packet */
+ ptr = UnStuffData(ptr, end, strip_info->rx_buff, 8);
+ if (!ptr) {
+ RecvErr("ARP Packet too short", strip_info);
+ return;
+ }
+
+ packetlen = 8 + (arphdr->ar_hln + arphdr->ar_pln) * 2;
+
+ if (packetlen > MAX_RECV_MTU) {
+ printk(KERN_INFO
+ "%s: Dropping oversized received ARP packet: %d bytes\n",
+ strip_info->dev->name, packetlen);
+ strip_info->rx_dropped++;
+ return;
+ }
+
+ /*printk(KERN_INFO "%s: Got %d byte ARP %s\n",
+ strip_info->dev->name, packetlen,
+ ntohs(arphdr->ar_op) == ARPOP_REQUEST ? "request" : "reply"); */
+
+ /* Decode remainder of the ARP packet */
+ ptr =
+ UnStuffData(ptr, end, strip_info->rx_buff + 8, packetlen - 8);
+ if (!ptr) {
+ RecvErr("ARP Packet too short", strip_info);
+ return;
+ }
+
+ if (ptr < end) {
+ RecvErr("ARP Packet too long", strip_info);
+ return;
+ }
+
+ header->protocol = htons(ETH_P_ARP);
+
+ deliver_packet(strip_info, header, packetlen);
+}
+
+/*
+ * process_text_message processes a <CR>-terminated block of data received
+ * from the radio that doesn't begin with a '*' character. All normal
+ * Starmode communication messages with the radio begin with a '*',
+ * so any text that does not indicates a serial port error, a radio that
+ * is in Hayes command mode instead of Starmode, or a radio with really
+ * old firmware that doesn't frame its Starmode responses properly.
+ */
+static void process_text_message(struct strip *strip_info)
+{
+ __u8 *msg = strip_info->sx_buff;
+ int len = strip_info->sx_count;
+
+ /* Check for anything that looks like it might be our radio name */
+ /* (This is here for backwards compatibility with old firmware) */
+ if (len == 9 && get_radio_address(strip_info, msg) == 0)
+ return;
+
+ if (text_equal(msg, len, "OK"))
+ return; /* Ignore 'OK' responses from prior commands */
+ if (text_equal(msg, len, "ERROR"))
+ return; /* Ignore 'ERROR' messages */
+ if (has_prefix(msg, len, "ate0q1"))
+ return; /* Ignore character echo back from the radio */
+
+ /* Catch other error messages */
+ /* (This is here for backwards compatibility with old firmware) */
+ if (has_prefix(msg, len, "ERR_")) {
+ RecvErr_Message(strip_info, NULL, &msg[4], len - 4);
+ return;
+ }
+
+ RecvErr("No initial *", strip_info);
+}
+
+/*
+ * process_message processes a <CR>-terminated block of data received
+ * from the radio. If the radio is not in Starmode or has old firmware,
+ * it may be a line of text in response to an AT command. Ideally, with
+ * a current radio that's properly in Starmode, all data received should
+ * be properly framed and checksummed radio message blocks, containing
+ * either a starmode packet, or a other communication from the radio
+ * firmware, like "INF_" Info messages and &COMMAND responses.
+ */
+static void process_message(struct strip *strip_info)
+{
+ STRIP_Header header = { zero_address, zero_address, 0 };
+ __u8 *ptr = strip_info->sx_buff;
+ __u8 *end = strip_info->sx_buff + strip_info->sx_count;
+ __u8 sendername[32], *sptr = sendername;
+ MetricomKey key;
+
+ /*HexDump("Receiving", strip_info, ptr, end); */
+
+ /* Check for start of address marker, and then skip over it */
+ if (*ptr == '*')
+ ptr++;
+ else {
+ process_text_message(strip_info);
+ return;
+ }
+
+ /* Copy out the return address */
+ while (ptr < end && *ptr != '*'
+ && sptr < ARRAY_END(sendername) - 1)
+ *sptr++ = *ptr++;
+ *sptr = 0; /* Null terminate the sender name */
+
+ /* Check for end of address marker, and skip over it */
+ if (ptr >= end || *ptr != '*') {
+ RecvErr("No second *", strip_info);
+ return;
+ }
+ ptr++; /* Skip the second '*' */
+
+ /* If the sender name is "&COMMAND", ignore this 'packet' */
+ /* (This is here for backwards compatibility with old firmware) */
+ if (!strcmp(sendername, "&COMMAND")) {
+ strip_info->firmware_level = NoStructure;
+ strip_info->next_command = CompatibilityCommand;
+ return;
+ }
+
+ if (ptr + 4 > end) {
+ RecvErr("No proto key", strip_info);
+ return;
+ }
+
+ /* Get the protocol key out of the buffer */
+ key.c[0] = *ptr++;
+ key.c[1] = *ptr++;
+ key.c[2] = *ptr++;
+ key.c[3] = *ptr++;
+
+ /* If we're using checksums, verify the checksum at the end of the packet */
+ if (strip_info->firmware_level >= ChecksummedMessages) {
+ end -= 4; /* Chop the last four bytes off the packet (they're the checksum) */
+ if (ptr > end) {
+ RecvErr("Missing Checksum", strip_info);
+ return;
+ }
+ if (!verify_checksum(strip_info)) {
+ RecvErr("Bad Checksum", strip_info);
+ return;
+ }
+ }
+
+ /*printk(KERN_INFO "%s: Got packet from \"%s\".\n", strip_info->dev->name, sendername); */
+
+ /*
+ * Fill in (pseudo) source and destination addresses in the packet.
+ * We assume that the destination address was our address (the radio does not
+ * tell us this). If the radio supplies a source address, then we use it.
+ */
+ header.dst_addr = strip_info->true_dev_addr;
+ string_to_radio_address(&header.src_addr, sendername);
+
+#ifdef EXT_COUNTERS
+ if (key.l == SIP0Key.l) {
+ strip_info->rx_rbytes += (end - ptr);
+ process_IP_packet(strip_info, &header, ptr, end);
+ } else if (key.l == ARP0Key.l) {
+ strip_info->rx_rbytes += (end - ptr);
+ process_ARP_packet(strip_info, &header, ptr, end);
+ } else if (key.l == ATR_Key.l) {
+ strip_info->rx_ebytes += (end - ptr);
+ process_AT_response(strip_info, ptr, end);
+ } else if (key.l == ACK_Key.l) {
+ strip_info->rx_ebytes += (end - ptr);
+ process_ACK(strip_info, ptr, end);
+ } else if (key.l == INF_Key.l) {
+ strip_info->rx_ebytes += (end - ptr);
+ process_Info(strip_info, ptr, end);
+ } else if (key.l == ERR_Key.l) {
+ strip_info->rx_ebytes += (end - ptr);
+ RecvErr_Message(strip_info, sendername, ptr, end - ptr);
+ } else
+ RecvErr("Unrecognized protocol key", strip_info);
+#else
+ if (key.l == SIP0Key.l)
+ process_IP_packet(strip_info, &header, ptr, end);
+ else if (key.l == ARP0Key.l)
+ process_ARP_packet(strip_info, &header, ptr, end);
+ else if (key.l == ATR_Key.l)
+ process_AT_response(strip_info, ptr, end);
+ else if (key.l == ACK_Key.l)
+ process_ACK(strip_info, ptr, end);
+ else if (key.l == INF_Key.l)
+ process_Info(strip_info, ptr, end);
+ else if (key.l == ERR_Key.l)
+ RecvErr_Message(strip_info, sendername, ptr, end - ptr);
+ else
+ RecvErr("Unrecognized protocol key", strip_info);
+#endif
+}
+
+#define TTYERROR(X) ((X) == TTY_BREAK ? "Break" : \
+ (X) == TTY_FRAME ? "Framing Error" : \
+ (X) == TTY_PARITY ? "Parity Error" : \
+ (X) == TTY_OVERRUN ? "Hardware Overrun" : "Unknown Error")
+
+/*
+ * Handle the 'receiver data ready' interrupt.
+ * This function is called by the 'tty_io' module in the kernel when
+ * a block of STRIP data has been received, which can now be decapsulated
+ * and sent on to some IP layer for further processing.
+ */
+
+static void strip_receive_buf(struct tty_struct *tty, const unsigned char *cp,
+ char *fp, int count)
+{
+ struct strip *strip_info = (struct strip *) tty->disc_data;
+ const unsigned char *end = cp + count;
+
+ if (!strip_info || strip_info->magic != STRIP_MAGIC
+ || !netif_running(strip_info->dev))
+ return;
+
+ spin_lock_bh(&strip_lock);
+#if 0
+ {
+ struct timeval tv;
+ do_gettimeofday(&tv);
+ printk(KERN_INFO
+ "**** strip_receive_buf: %3d bytes at %02d.%06d\n",
+ count, tv.tv_sec % 100, tv.tv_usec);
+ }
+#endif
+
+#ifdef EXT_COUNTERS
+ strip_info->rx_sbytes += count;
+#endif
+
+ /* Read the characters out of the buffer */
+ while (cp < end) {
+ if (fp && *fp)
+ printk(KERN_INFO "%s: %s on serial port\n",
+ strip_info->dev->name, TTYERROR(*fp));
+ if (fp && *fp++ && !strip_info->discard) { /* If there's a serial error, record it */
+ /* If we have some characters in the buffer, discard them */
+ strip_info->discard = strip_info->sx_count;
+ strip_info->rx_errors++;
+ }
+
+ /* Leading control characters (CR, NL, Tab, etc.) are ignored */
+ if (strip_info->sx_count > 0 || *cp >= ' ') {
+ if (*cp == 0x0D) { /* If end of packet, decide what to do with it */
+ if (strip_info->sx_count > 3000)
+ printk(KERN_INFO
+ "%s: Cut a %d byte packet (%zd bytes remaining)%s\n",
+ strip_info->dev->name,
+ strip_info->sx_count,
+ end - cp - 1,
+ strip_info->
+ discard ? " (discarded)" :
+ "");
+ if (strip_info->sx_count >
+ strip_info->sx_size) {
+ strip_info->rx_over_errors++;
+ printk(KERN_INFO
+ "%s: sx_buff overflow (%d bytes total)\n",
+ strip_info->dev->name,
+ strip_info->sx_count);
+ } else if (strip_info->discard)
+ printk(KERN_INFO
+ "%s: Discarding bad packet (%d/%d)\n",
+ strip_info->dev->name,
+ strip_info->discard,
+ strip_info->sx_count);
+ else
+ process_message(strip_info);
+ strip_info->discard = 0;
+ strip_info->sx_count = 0;
+ } else {
+ /* Make sure we have space in the buffer */
+ if (strip_info->sx_count <
+ strip_info->sx_size)
+ strip_info->sx_buff[strip_info->
+ sx_count] =
+ *cp;
+ strip_info->sx_count++;
+ }
+ }
+ cp++;
+ }
+ spin_unlock_bh(&strip_lock);
+}
+
+
+/************************************************************************/
+/* General control routines */
+
+static int set_mac_address(struct strip *strip_info,
+ MetricomAddress * addr)
+{
+ /*
+ * We're using a manually specified address if the address is set
+ * to anything other than all ones. Setting the address to all ones
+ * disables manual mode and goes back to automatic address determination
+ * (tracking the true address that the radio has).
+ */
+ strip_info->manual_dev_addr =
+ memcmp(addr->c, broadcast_address.c,
+ sizeof(broadcast_address));
+ if (strip_info->manual_dev_addr)
+ *(MetricomAddress *) strip_info->dev->dev_addr = *addr;
+ else
+ *(MetricomAddress *) strip_info->dev->dev_addr =
+ strip_info->true_dev_addr;
+ return 0;
+}
+
+static int strip_set_mac_address(struct net_device *dev, void *addr)
+{
+ struct strip *strip_info = netdev_priv(dev);
+ struct sockaddr *sa = addr;
+ printk(KERN_INFO "%s: strip_set_dev_mac_address called\n", dev->name);
+ set_mac_address(strip_info, (MetricomAddress *) sa->sa_data);
+ return 0;
+}
+
+static struct net_device_stats *strip_get_stats(struct net_device *dev)
+{
+ struct strip *strip_info = netdev_priv(dev);
+ static struct net_device_stats stats;
+
+ memset(&stats, 0, sizeof(struct net_device_stats));
+
+ stats.rx_packets = strip_info->rx_packets;
+ stats.tx_packets = strip_info->tx_packets;
+ stats.rx_dropped = strip_info->rx_dropped;
+ stats.tx_dropped = strip_info->tx_dropped;
+ stats.tx_errors = strip_info->tx_errors;
+ stats.rx_errors = strip_info->rx_errors;
+ stats.rx_over_errors = strip_info->rx_over_errors;
+ return (&stats);
+}
+
+
+/************************************************************************/
+/* Opening and closing */
+
+/*
+ * Here's the order things happen:
+ * When the user runs "slattach -p strip ..."
+ * 1. The TTY module calls strip_open
+ * 2. strip_open calls strip_alloc
+ * 3. strip_alloc calls register_netdev
+ * 4. register_netdev calls strip_dev_init
+ * 5. then strip_open finishes setting up the strip_info
+ *
+ * When the user runs "ifconfig st<x> up address netmask ..."
+ * 6. strip_open_low gets called
+ *
+ * When the user runs "ifconfig st<x> down"
+ * 7. strip_close_low gets called
+ *
+ * When the user kills the slattach process
+ * 8. strip_close gets called
+ * 9. strip_close calls dev_close
+ * 10. if the device is still up, then dev_close calls strip_close_low
+ * 11. strip_close calls strip_free
+ */
+
+/* Open the low-level part of the STRIP channel. Easy! */
+
+static int strip_open_low(struct net_device *dev)
+{
+ struct strip *strip_info = netdev_priv(dev);
+
+ if (strip_info->tty == NULL)
+ return (-ENODEV);
+
+ if (!allocate_buffers(strip_info, dev->mtu))
+ return (-ENOMEM);
+
+ strip_info->sx_count = 0;
+ strip_info->tx_left = 0;
+
+ strip_info->discard = 0;
+ strip_info->working = FALSE;
+ strip_info->firmware_level = NoStructure;
+ strip_info->next_command = CompatibilityCommand;
+ strip_info->user_baud = get_baud(strip_info->tty);
+
+ printk(KERN_INFO "%s: Initializing Radio.\n",
+ strip_info->dev->name);
+ ResetRadio(strip_info);
+ strip_info->idle_timer.expires = jiffies + 1 * HZ;
+ add_timer(&strip_info->idle_timer);
+ netif_wake_queue(dev);
+ return (0);
+}
+
+
+/*
+ * Close the low-level part of the STRIP channel. Easy!
+ */
+
+static int strip_close_low(struct net_device *dev)
+{
+ struct strip *strip_info = netdev_priv(dev);
+
+ if (strip_info->tty == NULL)
+ return -EBUSY;
+ strip_info->tty->flags &= ~(1 << TTY_DO_WRITE_WAKEUP);
+
+ netif_stop_queue(dev);
+
+ /*
+ * Free all STRIP frame buffers.
+ */
+ if (strip_info->rx_buff) {
+ kfree(strip_info->rx_buff);
+ strip_info->rx_buff = NULL;
+ }
+ if (strip_info->sx_buff) {
+ kfree(strip_info->sx_buff);
+ strip_info->sx_buff = NULL;
+ }
+ if (strip_info->tx_buff) {
+ kfree(strip_info->tx_buff);
+ strip_info->tx_buff = NULL;
+ }
+ del_timer(&strip_info->idle_timer);
+ return 0;
+}
+
+/*
+ * This routine is called by DDI when the
+ * (dynamically assigned) device is registered
+ */
+
+static void strip_dev_setup(struct net_device *dev)
+{
+ /*
+ * Finish setting up the DEVICE info.
+ */
+
+ SET_MODULE_OWNER(dev);
+
+ dev->trans_start = 0;
+ dev->last_rx = 0;
+ dev->tx_queue_len = 30; /* Drop after 30 frames queued */
+
+ dev->flags = 0;
+ dev->mtu = DEFAULT_STRIP_MTU;
+ dev->type = ARPHRD_METRICOM; /* dtang */
+ dev->hard_header_len = sizeof(STRIP_Header);
+ /*
+ * dev->priv Already holds a pointer to our struct strip
+ */
+
+ *(MetricomAddress *) & dev->broadcast = broadcast_address;
+ dev->dev_addr[0] = 0;
+ dev->addr_len = sizeof(MetricomAddress);
+
+ /*
+ * Pointers to interface service routines.
+ */
+
+ dev->open = strip_open_low;
+ dev->stop = strip_close_low;
+ dev->hard_start_xmit = strip_xmit;
+ dev->hard_header = strip_header;
+ dev->rebuild_header = strip_rebuild_header;
+ dev->set_mac_address = strip_set_mac_address;
+ dev->get_stats = strip_get_stats;
+ dev->change_mtu = strip_change_mtu;
+}
+
+/*
+ * Free a STRIP channel.
+ */
+
+static void strip_free(struct strip *strip_info)
+{
+ spin_lock_bh(&strip_lock);
+ list_del_rcu(&strip_info->list);
+ spin_unlock_bh(&strip_lock);
+
+ strip_info->magic = 0;
+
+ free_netdev(strip_info->dev);
+}
+
+
+/*
+ * Allocate a new free STRIP channel
+ */
+static struct strip *strip_alloc(void)
+{
+ struct list_head *n;
+ struct net_device *dev;
+ struct strip *strip_info;
+
+ dev = alloc_netdev(sizeof(struct strip), "st%d",
+ strip_dev_setup);
+
+ if (!dev)
+ return NULL; /* If no more memory, return */
+
+
+ strip_info = dev->priv;
+ strip_info->dev = dev;
+
+ strip_info->magic = STRIP_MAGIC;
+ strip_info->tty = NULL;
+
+ strip_info->gratuitous_arp = jiffies + LongTime;
+ strip_info->arp_interval = 0;
+ init_timer(&strip_info->idle_timer);
+ strip_info->idle_timer.data = (long) dev;
+ strip_info->idle_timer.function = strip_IdleTask;
+
+
+ spin_lock_bh(&strip_lock);
+ rescan:
+ /*
+ * Search the list to find where to put our new entry
+ * (and in the process decide what channel number it is
+ * going to be)
+ */
+ list_for_each(n, &strip_list) {
+ struct strip *s = hlist_entry(n, struct strip, list);
+
+ if (s->dev->base_addr == dev->base_addr) {
+ ++dev->base_addr;
+ goto rescan;
+ }
+ }
+
+ sprintf(dev->name, "st%ld", dev->base_addr);
+
+ list_add_tail_rcu(&strip_info->list, &strip_list);
+ spin_unlock_bh(&strip_lock);
+
+ return strip_info;
+}
+
+/*
+ * Open the high-level part of the STRIP channel.
+ * This function is called by the TTY module when the
+ * STRIP line discipline is called for. Because we are
+ * sure the tty line exists, we only have to link it to
+ * a free STRIP channel...
+ */
+
+static int strip_open(struct tty_struct *tty)
+{
+ struct strip *strip_info = (struct strip *) tty->disc_data;
+
+ /*
+ * First make sure we're not already connected.
+ */
+
+ if (strip_info && strip_info->magic == STRIP_MAGIC)
+ return -EEXIST;
+
+ /*
+ * OK. Find a free STRIP channel to use.
+ */
+ if ((strip_info = strip_alloc()) == NULL)
+ return -ENFILE;
+
+ /*
+ * Register our newly created device so it can be ifconfig'd
+ * strip_dev_init() will be called as a side-effect
+ */
+
+ if (register_netdev(strip_info->dev) != 0) {
+ printk(KERN_ERR "strip: register_netdev() failed.\n");
+ strip_free(strip_info);
+ return -ENFILE;
+ }
+
+ strip_info->tty = tty;
+ tty->disc_data = strip_info;
+ if (tty->driver->flush_buffer)
+ tty->driver->flush_buffer(tty);
+
+ /*
+ * Restore default settings
+ */
+
+ strip_info->dev->type = ARPHRD_METRICOM; /* dtang */
+
+ /*
+ * Set tty options
+ */
+
+ tty->termios->c_iflag |= IGNBRK | IGNPAR; /* Ignore breaks and parity errors. */
+ tty->termios->c_cflag |= CLOCAL; /* Ignore modem control signals. */
+ tty->termios->c_cflag &= ~HUPCL; /* Don't close on hup */
+
+ printk(KERN_INFO "STRIP: device \"%s\" activated\n",
+ strip_info->dev->name);
+
+ /*
+ * Done. We have linked the TTY line to a channel.
+ */
+ return (strip_info->dev->base_addr);
+}
+
+/*
+ * Close down a STRIP channel.
+ * This means flushing out any pending queues, and then restoring the
+ * TTY line discipline to what it was before it got hooked to STRIP
+ * (which usually is TTY again).
+ */
+
+static void strip_close(struct tty_struct *tty)
+{
+ struct strip *strip_info = (struct strip *) tty->disc_data;
+
+ /*
+ * First make sure we're connected.
+ */
+
+ if (!strip_info || strip_info->magic != STRIP_MAGIC)
+ return;
+
+ unregister_netdev(strip_info->dev);
+
+ tty->disc_data = NULL;
+ strip_info->tty = NULL;
+ printk(KERN_INFO "STRIP: device \"%s\" closed down\n",
+ strip_info->dev->name);
+ strip_free(strip_info);
+ tty->disc_data = NULL;
+}
+
+
+/************************************************************************/
+/* Perform I/O control calls on an active STRIP channel. */
+
+static int strip_ioctl(struct tty_struct *tty, struct file *file,
+ unsigned int cmd, unsigned long arg)
+{
+ struct strip *strip_info = (struct strip *) tty->disc_data;
+
+ /*
+ * First make sure we're connected.
+ */
+
+ if (!strip_info || strip_info->magic != STRIP_MAGIC)
+ return -EINVAL;
+
+ switch (cmd) {
+ case SIOCGIFNAME:
+ if(copy_to_user((void __user *) arg, strip_info->dev->name, strlen(strip_info->dev->name) + 1))
+ return -EFAULT;
+ break;
+ case SIOCSIFHWADDR:
+ {
+ MetricomAddress addr;
+ //printk(KERN_INFO "%s: SIOCSIFHWADDR\n", strip_info->dev->name);
+ if(copy_from_user(&addr, (void __user *) arg, sizeof(MetricomAddress)))
+ return -EFAULT;
+ return set_mac_address(strip_info, &addr);
+ }
+ /*
+ * Allow stty to read, but not set, the serial port
+ */
+
+ case TCGETS:
+ case TCGETA:
+ return n_tty_ioctl(tty, file, cmd, arg);
+ break;
+ default:
+ return -ENOIOCTLCMD;
+ break;
+ }
+ return 0;
+}
+
+
+/************************************************************************/
+/* Initialization */
+
+static struct tty_ldisc strip_ldisc = {
+ .magic = TTY_LDISC_MAGIC,
+ .name = "strip",
+ .owner = THIS_MODULE,
+ .open = strip_open,
+ .close = strip_close,
+ .ioctl = strip_ioctl,
+ .receive_buf = strip_receive_buf,
+ .receive_room = strip_receive_room,
+ .write_wakeup = strip_write_some_more,
+};
+
+/*
+ * Initialize the STRIP driver.
+ * This routine is called at boot time, to bootstrap the multi-channel
+ * STRIP driver
+ */
+
+static char signon[] __initdata =
+ KERN_INFO "STRIP: Version %s (unlimited channels)\n";
+
+static int __init strip_init_driver(void)
+{
+ int status;
+
+ printk(signon, StripVersion);
+
+
+ /*
+ * Fill in our line protocol discipline, and register it
+ */
+ if ((status = tty_register_ldisc(N_STRIP, &strip_ldisc)))
+ printk(KERN_ERR "STRIP: can't register line discipline (err = %d)\n",
+ status);
+
+ /*
+ * Register the status file with /proc
+ */
+ proc_net_fops_create("strip", S_IFREG | S_IRUGO, &strip_seq_fops);
+
+ return status;
+}
+
+module_init(strip_init_driver);
+
+static const char signoff[] __exitdata =
+ KERN_INFO "STRIP: Module Unloaded\n";
+
+static void __exit strip_exit_driver(void)
+{
+ int i;
+ struct list_head *p,*n;
+
+ /* module ref count rules assure that all entries are unregistered */
+ list_for_each_safe(p, n, &strip_list) {
+ struct strip *s = list_entry(p, struct strip, list);
+ strip_free(s);
+ }
+
+ /* Unregister with the /proc/net file here. */
+ proc_net_remove("strip");
+
+ if ((i = tty_register_ldisc(N_STRIP, NULL)))
+ printk(KERN_ERR "STRIP: can't unregister line discipline (err = %d)\n", i);
+
+ printk(signoff);
+}
+
+module_exit(strip_exit_driver);
+
+MODULE_AUTHOR("Stuart Cheshire <cheshire@cs.stanford.edu>");
+MODULE_DESCRIPTION("Starmode Radio IP (STRIP) Device Driver");
+MODULE_LICENSE("Dual BSD/GPL");
+
+MODULE_SUPPORTED_DEVICE("Starmode Radio IP (STRIP) modem");
diff --git a/drivers/net/wireless/todo.txt b/drivers/net/wireless/todo.txt
new file mode 100644
index 0000000..3223401
--- /dev/null
+++ b/drivers/net/wireless/todo.txt
@@ -0,0 +1,15 @@
+ Wireless Todo
+ -------------
+
+1) Bring other kernel Wireless LAN drivers here
+ Completed
+
+2) Bring new Wireless LAN driver not yet in the kernel there
+ See my web page for details
+ In particular : HostAP
+
+3) Misc
+ o Mark wavelan, wavelan_cs, netwave_cs drivers as obsolete
+ o Maybe arlan.c, ray_cs.c and strip.c also deserve to be obsolete
+
+ Jean II
diff --git a/drivers/net/wireless/wavelan.c b/drivers/net/wireless/wavelan.c
new file mode 100644
index 0000000..7a5e20a
--- /dev/null
+++ b/drivers/net/wireless/wavelan.c
@@ -0,0 +1,4452 @@
+/*
+ * WaveLAN ISA driver
+ *
+ * Jean II - HPLB '96
+ *
+ * Reorganisation and extension of the driver.
+ * Original copyright follows (also see the end of this file).
+ * See wavelan.p.h for details.
+ *
+ *
+ *
+ * AT&T GIS (nee NCR) WaveLAN card:
+ * An Ethernet-like radio transceiver
+ * controlled by an Intel 82586 coprocessor.
+ */
+
+#include "wavelan.p.h" /* Private header */
+
+/************************* MISC SUBROUTINES **************************/
+/*
+ * Subroutines which won't fit in one of the following category
+ * (WaveLAN modem or i82586)
+ */
+
+/*------------------------------------------------------------------*/
+/*
+ * Translate irq number to PSA irq parameter
+ */
+static u8 wv_irq_to_psa(int irq)
+{
+ if (irq < 0 || irq >= NELS(irqvals))
+ return 0;
+
+ return irqvals[irq];
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Translate PSA irq parameter to irq number
+ */
+static int __init wv_psa_to_irq(u8 irqval)
+{
+ int irq;
+
+ for (irq = 0; irq < NELS(irqvals); irq++)
+ if (irqvals[irq] == irqval)
+ return irq;
+
+ return -1;
+}
+
+#ifdef STRUCT_CHECK
+/*------------------------------------------------------------------*/
+/*
+ * Sanity routine to verify the sizes of the various WaveLAN interface
+ * structures.
+ */
+static char *wv_struct_check(void)
+{
+#define SC(t,s,n) if (sizeof(t) != s) return(n);
+
+ SC(psa_t, PSA_SIZE, "psa_t");
+ SC(mmw_t, MMW_SIZE, "mmw_t");
+ SC(mmr_t, MMR_SIZE, "mmr_t");
+ SC(ha_t, HA_SIZE, "ha_t");
+
+#undef SC
+
+ return ((char *) NULL);
+} /* wv_struct_check */
+#endif /* STRUCT_CHECK */
+
+/********************* HOST ADAPTER SUBROUTINES *********************/
+/*
+ * Useful subroutines to manage the WaveLAN ISA interface
+ *
+ * One major difference with the PCMCIA hardware (except the port mapping)
+ * is that we have to keep the state of the Host Control Register
+ * because of the interrupt enable & bus size flags.
+ */
+
+/*------------------------------------------------------------------*/
+/*
+ * Read from card's Host Adaptor Status Register.
+ */
+static inline u16 hasr_read(unsigned long ioaddr)
+{
+ return (inw(HASR(ioaddr)));
+} /* hasr_read */
+
+/*------------------------------------------------------------------*/
+/*
+ * Write to card's Host Adapter Command Register.
+ */
+static inline void hacr_write(unsigned long ioaddr, u16 hacr)
+{
+ outw(hacr, HACR(ioaddr));
+} /* hacr_write */
+
+/*------------------------------------------------------------------*/
+/*
+ * Write to card's Host Adapter Command Register. Include a delay for
+ * those times when it is needed.
+ */
+static inline void hacr_write_slow(unsigned long ioaddr, u16 hacr)
+{
+ hacr_write(ioaddr, hacr);
+ /* delay might only be needed sometimes */
+ mdelay(1);
+} /* hacr_write_slow */
+
+/*------------------------------------------------------------------*/
+/*
+ * Set the channel attention bit.
+ */
+static inline void set_chan_attn(unsigned long ioaddr, u16 hacr)
+{
+ hacr_write(ioaddr, hacr | HACR_CA);
+} /* set_chan_attn */
+
+/*------------------------------------------------------------------*/
+/*
+ * Reset, and then set host adaptor into default mode.
+ */
+static inline void wv_hacr_reset(unsigned long ioaddr)
+{
+ hacr_write_slow(ioaddr, HACR_RESET);
+ hacr_write(ioaddr, HACR_DEFAULT);
+} /* wv_hacr_reset */
+
+/*------------------------------------------------------------------*/
+/*
+ * Set the I/O transfer over the ISA bus to 8-bit mode
+ */
+static inline void wv_16_off(unsigned long ioaddr, u16 hacr)
+{
+ hacr &= ~HACR_16BITS;
+ hacr_write(ioaddr, hacr);
+} /* wv_16_off */
+
+/*------------------------------------------------------------------*/
+/*
+ * Set the I/O transfer over the ISA bus to 8-bit mode
+ */
+static inline void wv_16_on(unsigned long ioaddr, u16 hacr)
+{
+ hacr |= HACR_16BITS;
+ hacr_write(ioaddr, hacr);
+} /* wv_16_on */
+
+/*------------------------------------------------------------------*/
+/*
+ * Disable interrupts on the WaveLAN hardware.
+ * (called by wv_82586_stop())
+ */
+static inline void wv_ints_off(struct net_device * dev)
+{
+ net_local *lp = (net_local *) dev->priv;
+ unsigned long ioaddr = dev->base_addr;
+
+ lp->hacr &= ~HACR_INTRON;
+ hacr_write(ioaddr, lp->hacr);
+} /* wv_ints_off */
+
+/*------------------------------------------------------------------*/
+/*
+ * Enable interrupts on the WaveLAN hardware.
+ * (called by wv_hw_reset())
+ */
+static inline void wv_ints_on(struct net_device * dev)
+{
+ net_local *lp = (net_local *) dev->priv;
+ unsigned long ioaddr = dev->base_addr;
+
+ lp->hacr |= HACR_INTRON;
+ hacr_write(ioaddr, lp->hacr);
+} /* wv_ints_on */
+
+/******************* MODEM MANAGEMENT SUBROUTINES *******************/
+/*
+ * Useful subroutines to manage the modem of the WaveLAN
+ */
+
+/*------------------------------------------------------------------*/
+/*
+ * Read the Parameter Storage Area from the WaveLAN card's memory
+ */
+/*
+ * Read bytes from the PSA.
+ */
+static void psa_read(unsigned long ioaddr, u16 hacr, int o, /* offset in PSA */
+ u8 * b, /* buffer to fill */
+ int n)
+{ /* size to read */
+ wv_16_off(ioaddr, hacr);
+
+ while (n-- > 0) {
+ outw(o, PIOR2(ioaddr));
+ o++;
+ *b++ = inb(PIOP2(ioaddr));
+ }
+
+ wv_16_on(ioaddr, hacr);
+} /* psa_read */
+
+/*------------------------------------------------------------------*/
+/*
+ * Write the Parameter Storage Area to the WaveLAN card's memory.
+ */
+static void psa_write(unsigned long ioaddr, u16 hacr, int o, /* Offset in PSA */
+ u8 * b, /* Buffer in memory */
+ int n)
+{ /* Length of buffer */
+ int count = 0;
+
+ wv_16_off(ioaddr, hacr);
+
+ while (n-- > 0) {
+ outw(o, PIOR2(ioaddr));
+ o++;
+
+ outb(*b, PIOP2(ioaddr));
+ b++;
+
+ /* Wait for the memory to finish its write cycle */
+ count = 0;
+ while ((count++ < 100) &&
+ (hasr_read(ioaddr) & HASR_PSA_BUSY)) mdelay(1);
+ }
+
+ wv_16_on(ioaddr, hacr);
+} /* psa_write */
+
+#ifdef SET_PSA_CRC
+/*------------------------------------------------------------------*/
+/*
+ * Calculate the PSA CRC
+ * Thanks to Valster, Nico <NVALSTER@wcnd.nl.lucent.com> for the code
+ * NOTE: By specifying a length including the CRC position the
+ * returned value should be zero. (i.e. a correct checksum in the PSA)
+ *
+ * The Windows drivers don't use the CRC, but the AP and the PtP tool
+ * depend on it.
+ */
+static inline u16 psa_crc(u8 * psa, /* The PSA */
+ int size)
+{ /* Number of short for CRC */
+ int byte_cnt; /* Loop on the PSA */
+ u16 crc_bytes = 0; /* Data in the PSA */
+ int bit_cnt; /* Loop on the bits of the short */
+
+ for (byte_cnt = 0; byte_cnt < size; byte_cnt++) {
+ crc_bytes ^= psa[byte_cnt]; /* Its an xor */
+
+ for (bit_cnt = 1; bit_cnt < 9; bit_cnt++) {
+ if (crc_bytes & 0x0001)
+ crc_bytes = (crc_bytes >> 1) ^ 0xA001;
+ else
+ crc_bytes >>= 1;
+ }
+ }
+
+ return crc_bytes;
+} /* psa_crc */
+#endif /* SET_PSA_CRC */
+
+/*------------------------------------------------------------------*/
+/*
+ * update the checksum field in the Wavelan's PSA
+ */
+static void update_psa_checksum(struct net_device * dev, unsigned long ioaddr, u16 hacr)
+{
+#ifdef SET_PSA_CRC
+ psa_t psa;
+ u16 crc;
+
+ /* read the parameter storage area */
+ psa_read(ioaddr, hacr, 0, (unsigned char *) &psa, sizeof(psa));
+
+ /* update the checksum */
+ crc = psa_crc((unsigned char *) &psa,
+ sizeof(psa) - sizeof(psa.psa_crc[0]) -
+ sizeof(psa.psa_crc[1])
+ - sizeof(psa.psa_crc_status));
+
+ psa.psa_crc[0] = crc & 0xFF;
+ psa.psa_crc[1] = (crc & 0xFF00) >> 8;
+
+ /* Write it ! */
+ psa_write(ioaddr, hacr, (char *) &psa.psa_crc - (char *) &psa,
+ (unsigned char *) &psa.psa_crc, 2);
+
+#ifdef DEBUG_IOCTL_INFO
+ printk(KERN_DEBUG "%s: update_psa_checksum(): crc = 0x%02x%02x\n",
+ dev->name, psa.psa_crc[0], psa.psa_crc[1]);
+
+ /* Check again (luxury !) */
+ crc = psa_crc((unsigned char *) &psa,
+ sizeof(psa) - sizeof(psa.psa_crc_status));
+
+ if (crc != 0)
+ printk(KERN_WARNING
+ "%s: update_psa_checksum(): CRC does not agree with PSA data (even after recalculating)\n",
+ dev->name);
+#endif /* DEBUG_IOCTL_INFO */
+#endif /* SET_PSA_CRC */
+} /* update_psa_checksum */
+
+/*------------------------------------------------------------------*/
+/*
+ * Write 1 byte to the MMC.
+ */
+static inline void mmc_out(unsigned long ioaddr, u16 o, u8 d)
+{
+ int count = 0;
+
+ /* Wait for MMC to go idle */
+ while ((count++ < 100) && (inw(HASR(ioaddr)) & HASR_MMC_BUSY))
+ udelay(10);
+
+ outw((u16) (((u16) d << 8) | (o << 1) | 1), MMCR(ioaddr));
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Routine to write bytes to the Modem Management Controller.
+ * We start at the end because it is the way it should be!
+ */
+static inline void mmc_write(unsigned long ioaddr, u8 o, u8 * b, int n)
+{
+ o += n;
+ b += n;
+
+ while (n-- > 0)
+ mmc_out(ioaddr, --o, *(--b));
+} /* mmc_write */
+
+/*------------------------------------------------------------------*/
+/*
+ * Read a byte from the MMC.
+ * Optimised version for 1 byte, avoid using memory.
+ */
+static inline u8 mmc_in(unsigned long ioaddr, u16 o)
+{
+ int count = 0;
+
+ while ((count++ < 100) && (inw(HASR(ioaddr)) & HASR_MMC_BUSY))
+ udelay(10);
+ outw(o << 1, MMCR(ioaddr));
+
+ while ((count++ < 100) && (inw(HASR(ioaddr)) & HASR_MMC_BUSY))
+ udelay(10);
+ return (u8) (inw(MMCR(ioaddr)) >> 8);
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Routine to read bytes from the Modem Management Controller.
+ * The implementation is complicated by a lack of address lines,
+ * which prevents decoding of the low-order bit.
+ * (code has just been moved in the above function)
+ * We start at the end because it is the way it should be!
+ */
+static inline void mmc_read(unsigned long ioaddr, u8 o, u8 * b, int n)
+{
+ o += n;
+ b += n;
+
+ while (n-- > 0)
+ *(--b) = mmc_in(ioaddr, --o);
+} /* mmc_read */
+
+/*------------------------------------------------------------------*/
+/*
+ * Get the type of encryption available.
+ */
+static inline int mmc_encr(unsigned long ioaddr)
+{ /* I/O port of the card */
+ int temp;
+
+ temp = mmc_in(ioaddr, mmroff(0, mmr_des_avail));
+ if ((temp != MMR_DES_AVAIL_DES) && (temp != MMR_DES_AVAIL_AES))
+ return 0;
+ else
+ return temp;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Wait for the frequency EEPROM to complete a command.
+ * I hope this one will be optimally inlined.
+ */
+static inline void fee_wait(unsigned long ioaddr, /* I/O port of the card */
+ int delay, /* Base delay to wait for */
+ int number)
+{ /* Number of time to wait */
+ int count = 0; /* Wait only a limited time */
+
+ while ((count++ < number) &&
+ (mmc_in(ioaddr, mmroff(0, mmr_fee_status)) &
+ MMR_FEE_STATUS_BUSY)) udelay(delay);
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Read bytes from the Frequency EEPROM (frequency select cards).
+ */
+static void fee_read(unsigned long ioaddr, /* I/O port of the card */
+ u16 o, /* destination offset */
+ u16 * b, /* data buffer */
+ int n)
+{ /* number of registers */
+ b += n; /* Position at the end of the area */
+
+ /* Write the address */
+ mmc_out(ioaddr, mmwoff(0, mmw_fee_addr), o + n - 1);
+
+ /* Loop on all buffer */
+ while (n-- > 0) {
+ /* Write the read command */
+ mmc_out(ioaddr, mmwoff(0, mmw_fee_ctrl),
+ MMW_FEE_CTRL_READ);
+
+ /* Wait until EEPROM is ready (should be quick). */
+ fee_wait(ioaddr, 10, 100);
+
+ /* Read the value. */
+ *--b = ((mmc_in(ioaddr, mmroff(0, mmr_fee_data_h)) << 8) |
+ mmc_in(ioaddr, mmroff(0, mmr_fee_data_l)));
+ }
+}
+
+#ifdef WIRELESS_EXT /* if the wireless extension exists in the kernel */
+
+/*------------------------------------------------------------------*/
+/*
+ * Write bytes from the Frequency EEPROM (frequency select cards).
+ * This is a bit complicated, because the frequency EEPROM has to
+ * be unprotected and the write enabled.
+ * Jean II
+ */
+static void fee_write(unsigned long ioaddr, /* I/O port of the card */
+ u16 o, /* destination offset */
+ u16 * b, /* data buffer */
+ int n)
+{ /* number of registers */
+ b += n; /* Position at the end of the area. */
+
+#ifdef EEPROM_IS_PROTECTED /* disabled */
+#ifdef DOESNT_SEEM_TO_WORK /* disabled */
+ /* Ask to read the protected register */
+ mmc_out(ioaddr, mmwoff(0, mmw_fee_ctrl), MMW_FEE_CTRL_PRREAD);
+
+ fee_wait(ioaddr, 10, 100);
+
+ /* Read the protected register. */
+ printk("Protected 2: %02X-%02X\n",
+ mmc_in(ioaddr, mmroff(0, mmr_fee_data_h)),
+ mmc_in(ioaddr, mmroff(0, mmr_fee_data_l)));
+#endif /* DOESNT_SEEM_TO_WORK */
+
+ /* Enable protected register. */
+ mmc_out(ioaddr, mmwoff(0, mmw_fee_addr), MMW_FEE_ADDR_EN);
+ mmc_out(ioaddr, mmwoff(0, mmw_fee_ctrl), MMW_FEE_CTRL_PREN);
+
+ fee_wait(ioaddr, 10, 100);
+
+ /* Unprotect area. */
+ mmc_out(ioaddr, mmwoff(0, mmw_fee_addr), o + n);
+ mmc_out(ioaddr, mmwoff(0, mmw_fee_ctrl), MMW_FEE_CTRL_PRWRITE);
+#ifdef DOESNT_SEEM_TO_WORK /* disabled */
+ /* or use: */
+ mmc_out(ioaddr, mmwoff(0, mmw_fee_ctrl), MMW_FEE_CTRL_PRCLEAR);
+#endif /* DOESNT_SEEM_TO_WORK */
+
+ fee_wait(ioaddr, 10, 100);
+#endif /* EEPROM_IS_PROTECTED */
+
+ /* Write enable. */
+ mmc_out(ioaddr, mmwoff(0, mmw_fee_addr), MMW_FEE_ADDR_EN);
+ mmc_out(ioaddr, mmwoff(0, mmw_fee_ctrl), MMW_FEE_CTRL_WREN);
+
+ fee_wait(ioaddr, 10, 100);
+
+ /* Write the EEPROM address. */
+ mmc_out(ioaddr, mmwoff(0, mmw_fee_addr), o + n - 1);
+
+ /* Loop on all buffer */
+ while (n-- > 0) {
+ /* Write the value. */
+ mmc_out(ioaddr, mmwoff(0, mmw_fee_data_h), (*--b) >> 8);
+ mmc_out(ioaddr, mmwoff(0, mmw_fee_data_l), *b & 0xFF);
+
+ /* Write the write command. */
+ mmc_out(ioaddr, mmwoff(0, mmw_fee_ctrl),
+ MMW_FEE_CTRL_WRITE);
+
+ /* WaveLAN documentation says to wait at least 10 ms for EEBUSY = 0 */
+ mdelay(10);
+ fee_wait(ioaddr, 10, 100);
+ }
+
+ /* Write disable. */
+ mmc_out(ioaddr, mmwoff(0, mmw_fee_addr), MMW_FEE_ADDR_DS);
+ mmc_out(ioaddr, mmwoff(0, mmw_fee_ctrl), MMW_FEE_CTRL_WDS);
+
+ fee_wait(ioaddr, 10, 100);
+
+#ifdef EEPROM_IS_PROTECTED /* disabled */
+ /* Reprotect EEPROM. */
+ mmc_out(ioaddr, mmwoff(0, mmw_fee_addr), 0x00);
+ mmc_out(ioaddr, mmwoff(0, mmw_fee_ctrl), MMW_FEE_CTRL_PRWRITE);
+
+ fee_wait(ioaddr, 10, 100);
+#endif /* EEPROM_IS_PROTECTED */
+}
+#endif /* WIRELESS_EXT */
+
+/************************ I82586 SUBROUTINES *************************/
+/*
+ * Useful subroutines to manage the Ethernet controller
+ */
+
+/*------------------------------------------------------------------*/
+/*
+ * Read bytes from the on-board RAM.
+ * Why does inlining this function make it fail?
+ */
+static /*inline */ void obram_read(unsigned long ioaddr,
+ u16 o, u8 * b, int n)
+{
+ outw(o, PIOR1(ioaddr));
+ insw(PIOP1(ioaddr), (unsigned short *) b, (n + 1) >> 1);
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Write bytes to the on-board RAM.
+ */
+static inline void obram_write(unsigned long ioaddr, u16 o, u8 * b, int n)
+{
+ outw(o, PIOR1(ioaddr));
+ outsw(PIOP1(ioaddr), (unsigned short *) b, (n + 1) >> 1);
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Acknowledge the reading of the status issued by the i82586.
+ */
+static void wv_ack(struct net_device * dev)
+{
+ net_local *lp = (net_local *) dev->priv;
+ unsigned long ioaddr = dev->base_addr;
+ u16 scb_cs;
+ int i;
+
+ obram_read(ioaddr, scboff(OFFSET_SCB, scb_status),
+ (unsigned char *) &scb_cs, sizeof(scb_cs));
+ scb_cs &= SCB_ST_INT;
+
+ if (scb_cs == 0)
+ return;
+
+ obram_write(ioaddr, scboff(OFFSET_SCB, scb_command),
+ (unsigned char *) &scb_cs, sizeof(scb_cs));
+
+ set_chan_attn(ioaddr, lp->hacr);
+
+ for (i = 1000; i > 0; i--) {
+ obram_read(ioaddr, scboff(OFFSET_SCB, scb_command),
+ (unsigned char *) &scb_cs, sizeof(scb_cs));
+ if (scb_cs == 0)
+ break;
+
+ udelay(10);
+ }
+ udelay(100);
+
+#ifdef DEBUG_CONFIG_ERROR
+ if (i <= 0)
+ printk(KERN_INFO
+ "%s: wv_ack(): board not accepting command.\n",
+ dev->name);
+#endif
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Set channel attention bit and busy wait until command has
+ * completed, then acknowledge completion of the command.
+ */
+static inline int wv_synchronous_cmd(struct net_device * dev, const char *str)
+{
+ net_local *lp = (net_local *) dev->priv;
+ unsigned long ioaddr = dev->base_addr;
+ u16 scb_cmd;
+ ach_t cb;
+ int i;
+
+ scb_cmd = SCB_CMD_CUC & SCB_CMD_CUC_GO;
+ obram_write(ioaddr, scboff(OFFSET_SCB, scb_command),
+ (unsigned char *) &scb_cmd, sizeof(scb_cmd));
+
+ set_chan_attn(ioaddr, lp->hacr);
+
+ for (i = 1000; i > 0; i--) {
+ obram_read(ioaddr, OFFSET_CU, (unsigned char *) &cb,
+ sizeof(cb));
+ if (cb.ac_status & AC_SFLD_C)
+ break;
+
+ udelay(10);
+ }
+ udelay(100);
+
+ if (i <= 0 || !(cb.ac_status & AC_SFLD_OK)) {
+#ifdef DEBUG_CONFIG_ERROR
+ printk(KERN_INFO "%s: %s failed; status = 0x%x\n",
+ dev->name, str, cb.ac_status);
+#endif
+#ifdef DEBUG_I82586_SHOW
+ wv_scb_show(ioaddr);
+#endif
+ return -1;
+ }
+
+ /* Ack the status */
+ wv_ack(dev);
+
+ return 0;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Configuration commands completion interrupt.
+ * Check if done, and if OK.
+ */
+static inline int
+wv_config_complete(struct net_device * dev, unsigned long ioaddr, net_local * lp)
+{
+ unsigned short mcs_addr;
+ unsigned short status;
+ int ret;
+
+#ifdef DEBUG_INTERRUPT_TRACE
+ printk(KERN_DEBUG "%s: ->wv_config_complete()\n", dev->name);
+#endif
+
+ mcs_addr = lp->tx_first_in_use + sizeof(ac_tx_t) + sizeof(ac_nop_t)
+ + sizeof(tbd_t) + sizeof(ac_cfg_t) + sizeof(ac_ias_t);
+
+ /* Read the status of the last command (set mc list). */
+ obram_read(ioaddr, acoff(mcs_addr, ac_status),
+ (unsigned char *) &status, sizeof(status));
+
+ /* If not completed -> exit */
+ if ((status & AC_SFLD_C) == 0)
+ ret = 0; /* Not ready to be scrapped */
+ else {
+#ifdef DEBUG_CONFIG_ERROR
+ unsigned short cfg_addr;
+ unsigned short ias_addr;
+
+ /* Check mc_config command */
+ if ((status & AC_SFLD_OK) != AC_SFLD_OK)
+ printk(KERN_INFO
+ "%s: wv_config_complete(): set_multicast_address failed; status = 0x%x\n",
+ dev->name, status);
+
+ /* check ia-config command */
+ ias_addr = mcs_addr - sizeof(ac_ias_t);
+ obram_read(ioaddr, acoff(ias_addr, ac_status),
+ (unsigned char *) &status, sizeof(status));
+ if ((status & AC_SFLD_OK) != AC_SFLD_OK)
+ printk(KERN_INFO
+ "%s: wv_config_complete(): set_MAC_address failed; status = 0x%x\n",
+ dev->name, status);
+
+ /* Check config command. */
+ cfg_addr = ias_addr - sizeof(ac_cfg_t);
+ obram_read(ioaddr, acoff(cfg_addr, ac_status),
+ (unsigned char *) &status, sizeof(status));
+ if ((status & AC_SFLD_OK) != AC_SFLD_OK)
+ printk(KERN_INFO
+ "%s: wv_config_complete(): configure failed; status = 0x%x\n",
+ dev->name, status);
+#endif /* DEBUG_CONFIG_ERROR */
+
+ ret = 1; /* Ready to be scrapped */
+ }
+
+#ifdef DEBUG_INTERRUPT_TRACE
+ printk(KERN_DEBUG "%s: <-wv_config_complete() - %d\n", dev->name,
+ ret);
+#endif
+ return ret;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Command completion interrupt.
+ * Reclaim as many freed tx buffers as we can.
+ * (called in wavelan_interrupt()).
+ * Note : the spinlock is already grabbed for us.
+ */
+static int wv_complete(struct net_device * dev, unsigned long ioaddr, net_local * lp)
+{
+ int nreaped = 0;
+
+#ifdef DEBUG_INTERRUPT_TRACE
+ printk(KERN_DEBUG "%s: ->wv_complete()\n", dev->name);
+#endif
+
+ /* Loop on all the transmit buffers */
+ while (lp->tx_first_in_use != I82586NULL) {
+ unsigned short tx_status;
+
+ /* Read the first transmit buffer */
+ obram_read(ioaddr, acoff(lp->tx_first_in_use, ac_status),
+ (unsigned char *) &tx_status,
+ sizeof(tx_status));
+
+ /* If not completed -> exit */
+ if ((tx_status & AC_SFLD_C) == 0)
+ break;
+
+ /* Hack for reconfiguration */
+ if (tx_status == 0xFFFF)
+ if (!wv_config_complete(dev, ioaddr, lp))
+ break; /* Not completed */
+
+ /* We now remove this buffer */
+ nreaped++;
+ --lp->tx_n_in_use;
+
+/*
+if (lp->tx_n_in_use > 0)
+ printk("%c", "0123456789abcdefghijk"[lp->tx_n_in_use]);
+*/
+
+ /* Was it the last one? */
+ if (lp->tx_n_in_use <= 0)
+ lp->tx_first_in_use = I82586NULL;
+ else {
+ /* Next one in the chain */
+ lp->tx_first_in_use += TXBLOCKZ;
+ if (lp->tx_first_in_use >=
+ OFFSET_CU +
+ NTXBLOCKS * TXBLOCKZ) lp->tx_first_in_use -=
+ NTXBLOCKS * TXBLOCKZ;
+ }
+
+ /* Hack for reconfiguration */
+ if (tx_status == 0xFFFF)
+ continue;
+
+ /* Now, check status of the finished command */
+ if (tx_status & AC_SFLD_OK) {
+ int ncollisions;
+
+ lp->stats.tx_packets++;
+ ncollisions = tx_status & AC_SFLD_MAXCOL;
+ lp->stats.collisions += ncollisions;
+#ifdef DEBUG_TX_INFO
+ if (ncollisions > 0)
+ printk(KERN_DEBUG
+ "%s: wv_complete(): tx completed after %d collisions.\n",
+ dev->name, ncollisions);
+#endif
+ } else {
+ lp->stats.tx_errors++;
+ if (tx_status & AC_SFLD_S10) {
+ lp->stats.tx_carrier_errors++;
+#ifdef DEBUG_TX_FAIL
+ printk(KERN_DEBUG
+ "%s: wv_complete(): tx error: no CS.\n",
+ dev->name);
+#endif
+ }
+ if (tx_status & AC_SFLD_S9) {
+ lp->stats.tx_carrier_errors++;
+#ifdef DEBUG_TX_FAIL
+ printk(KERN_DEBUG
+ "%s: wv_complete(): tx error: lost CTS.\n",
+ dev->name);
+#endif
+ }
+ if (tx_status & AC_SFLD_S8) {
+ lp->stats.tx_fifo_errors++;
+#ifdef DEBUG_TX_FAIL
+ printk(KERN_DEBUG
+ "%s: wv_complete(): tx error: slow DMA.\n",
+ dev->name);
+#endif
+ }
+ if (tx_status & AC_SFLD_S6) {
+ lp->stats.tx_heartbeat_errors++;
+#ifdef DEBUG_TX_FAIL
+ printk(KERN_DEBUG
+ "%s: wv_complete(): tx error: heart beat.\n",
+ dev->name);
+#endif
+ }
+ if (tx_status & AC_SFLD_S5) {
+ lp->stats.tx_aborted_errors++;
+#ifdef DEBUG_TX_FAIL
+ printk(KERN_DEBUG
+ "%s: wv_complete(): tx error: too many collisions.\n",
+ dev->name);
+#endif
+ }
+ }
+
+#ifdef DEBUG_TX_INFO
+ printk(KERN_DEBUG
+ "%s: wv_complete(): tx completed, tx_status 0x%04x\n",
+ dev->name, tx_status);
+#endif
+ }
+
+#ifdef DEBUG_INTERRUPT_INFO
+ if (nreaped > 1)
+ printk(KERN_DEBUG "%s: wv_complete(): reaped %d\n",
+ dev->name, nreaped);
+#endif
+
+ /*
+ * Inform upper layers.
+ */
+ if (lp->tx_n_in_use < NTXBLOCKS - 1) {
+ netif_wake_queue(dev);
+ }
+#ifdef DEBUG_INTERRUPT_TRACE
+ printk(KERN_DEBUG "%s: <-wv_complete()\n", dev->name);
+#endif
+ return nreaped;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Reconfigure the i82586, or at least ask for it.
+ * Because wv_82586_config uses a transmission buffer, we must do it
+ * when we are sure that there is one left, so we do it now
+ * or in wavelan_packet_xmit() (I can't find any better place,
+ * wavelan_interrupt is not an option), so you may experience
+ * delays sometimes.
+ */
+static inline void wv_82586_reconfig(struct net_device * dev)
+{
+ net_local *lp = (net_local *) dev->priv;
+ unsigned long flags;
+
+ /* Arm the flag, will be cleard in wv_82586_config() */
+ lp->reconfig_82586 = 1;
+
+ /* Check if we can do it now ! */
+ if((netif_running(dev)) && !(netif_queue_stopped(dev))) {
+ spin_lock_irqsave(&lp->spinlock, flags);
+ /* May fail */
+ wv_82586_config(dev);
+ spin_unlock_irqrestore(&lp->spinlock, flags);
+ }
+ else {
+#ifdef DEBUG_CONFIG_INFO
+ printk(KERN_DEBUG
+ "%s: wv_82586_reconfig(): delayed (state = %lX)\n",
+ dev->name, dev->state);
+#endif
+ }
+}
+
+/********************* DEBUG & INFO SUBROUTINES *********************/
+/*
+ * This routine is used in the code to show information for debugging.
+ * Most of the time, it dumps the contents of hardware structures.
+ */
+
+#ifdef DEBUG_PSA_SHOW
+/*------------------------------------------------------------------*/
+/*
+ * Print the formatted contents of the Parameter Storage Area.
+ */
+static void wv_psa_show(psa_t * p)
+{
+ printk(KERN_DEBUG "##### WaveLAN PSA contents: #####\n");
+ printk(KERN_DEBUG "psa_io_base_addr_1: 0x%02X %02X %02X %02X\n",
+ p->psa_io_base_addr_1,
+ p->psa_io_base_addr_2,
+ p->psa_io_base_addr_3, p->psa_io_base_addr_4);
+ printk(KERN_DEBUG "psa_rem_boot_addr_1: 0x%02X %02X %02X\n",
+ p->psa_rem_boot_addr_1,
+ p->psa_rem_boot_addr_2, p->psa_rem_boot_addr_3);
+ printk(KERN_DEBUG "psa_holi_params: 0x%02x, ", p->psa_holi_params);
+ printk("psa_int_req_no: %d\n", p->psa_int_req_no);
+#ifdef DEBUG_SHOW_UNUSED
+ printk(KERN_DEBUG
+ "psa_unused0[]: %02X:%02X:%02X:%02X:%02X:%02X:%02X\n",
+ p->psa_unused0[0], p->psa_unused0[1], p->psa_unused0[2],
+ p->psa_unused0[3], p->psa_unused0[4], p->psa_unused0[5],
+ p->psa_unused0[6]);
+#endif /* DEBUG_SHOW_UNUSED */
+ printk(KERN_DEBUG
+ "psa_univ_mac_addr[]: %02x:%02x:%02x:%02x:%02x:%02x\n",
+ p->psa_univ_mac_addr[0], p->psa_univ_mac_addr[1],
+ p->psa_univ_mac_addr[2], p->psa_univ_mac_addr[3],
+ p->psa_univ_mac_addr[4], p->psa_univ_mac_addr[5]);
+ printk(KERN_DEBUG
+ "psa_local_mac_addr[]: %02x:%02x:%02x:%02x:%02x:%02x\n",
+ p->psa_local_mac_addr[0], p->psa_local_mac_addr[1],
+ p->psa_local_mac_addr[2], p->psa_local_mac_addr[3],
+ p->psa_local_mac_addr[4], p->psa_local_mac_addr[5]);
+ printk(KERN_DEBUG "psa_univ_local_sel: %d, ",
+ p->psa_univ_local_sel);
+ printk("psa_comp_number: %d, ", p->psa_comp_number);
+ printk("psa_thr_pre_set: 0x%02x\n", p->psa_thr_pre_set);
+ printk(KERN_DEBUG "psa_feature_select/decay_prm: 0x%02x, ",
+ p->psa_feature_select);
+ printk("psa_subband/decay_update_prm: %d\n", p->psa_subband);
+ printk(KERN_DEBUG "psa_quality_thr: 0x%02x, ", p->psa_quality_thr);
+ printk("psa_mod_delay: 0x%02x\n", p->psa_mod_delay);
+ printk(KERN_DEBUG "psa_nwid: 0x%02x%02x, ", p->psa_nwid[0],
+ p->psa_nwid[1]);
+ printk("psa_nwid_select: %d\n", p->psa_nwid_select);
+ printk(KERN_DEBUG "psa_encryption_select: %d, ",
+ p->psa_encryption_select);
+ printk
+ ("psa_encryption_key[]: %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x\n",
+ p->psa_encryption_key[0], p->psa_encryption_key[1],
+ p->psa_encryption_key[2], p->psa_encryption_key[3],
+ p->psa_encryption_key[4], p->psa_encryption_key[5],
+ p->psa_encryption_key[6], p->psa_encryption_key[7]);
+ printk(KERN_DEBUG "psa_databus_width: %d\n", p->psa_databus_width);
+ printk(KERN_DEBUG "psa_call_code/auto_squelch: 0x%02x, ",
+ p->psa_call_code[0]);
+ printk
+ ("psa_call_code[]: %02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X\n",
+ p->psa_call_code[0], p->psa_call_code[1], p->psa_call_code[2],
+ p->psa_call_code[3], p->psa_call_code[4], p->psa_call_code[5],
+ p->psa_call_code[6], p->psa_call_code[7]);
+#ifdef DEBUG_SHOW_UNUSED
+ printk(KERN_DEBUG "psa_reserved[]: %02X:%02X:%02X:%02X\n",
+ p->psa_reserved[0],
+ p->psa_reserved[1], p->psa_reserved[2], p->psa_reserved[3]);
+#endif /* DEBUG_SHOW_UNUSED */
+ printk(KERN_DEBUG "psa_conf_status: %d, ", p->psa_conf_status);
+ printk("psa_crc: 0x%02x%02x, ", p->psa_crc[0], p->psa_crc[1]);
+ printk("psa_crc_status: 0x%02x\n", p->psa_crc_status);
+} /* wv_psa_show */
+#endif /* DEBUG_PSA_SHOW */
+
+#ifdef DEBUG_MMC_SHOW
+/*------------------------------------------------------------------*/
+/*
+ * Print the formatted status of the Modem Management Controller.
+ * This function needs to be completed.
+ */
+static void wv_mmc_show(struct net_device * dev)
+{
+ unsigned long ioaddr = dev->base_addr;
+ net_local *lp = (net_local *) dev->priv;
+ mmr_t m;
+
+ /* Basic check */
+ if (hasr_read(ioaddr) & HASR_NO_CLK) {
+ printk(KERN_WARNING
+ "%s: wv_mmc_show: modem not connected\n",
+ dev->name);
+ return;
+ }
+
+ /* Read the mmc */
+ mmc_out(ioaddr, mmwoff(0, mmw_freeze), 1);
+ mmc_read(ioaddr, 0, (u8 *) & m, sizeof(m));
+ mmc_out(ioaddr, mmwoff(0, mmw_freeze), 0);
+
+#ifdef WIRELESS_EXT /* if wireless extension exists in the kernel */
+ /* Don't forget to update statistics */
+ lp->wstats.discard.nwid +=
+ (m.mmr_wrong_nwid_h << 8) | m.mmr_wrong_nwid_l;
+#endif /* WIRELESS_EXT */
+
+ printk(KERN_DEBUG "##### WaveLAN modem status registers: #####\n");
+#ifdef DEBUG_SHOW_UNUSED
+ printk(KERN_DEBUG
+ "mmc_unused0[]: %02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X\n",
+ m.mmr_unused0[0], m.mmr_unused0[1], m.mmr_unused0[2],
+ m.mmr_unused0[3], m.mmr_unused0[4], m.mmr_unused0[5],
+ m.mmr_unused0[6], m.mmr_unused0[7]);
+#endif /* DEBUG_SHOW_UNUSED */
+ printk(KERN_DEBUG "Encryption algorithm: %02X - Status: %02X\n",
+ m.mmr_des_avail, m.mmr_des_status);
+#ifdef DEBUG_SHOW_UNUSED
+ printk(KERN_DEBUG "mmc_unused1[]: %02X:%02X:%02X:%02X:%02X\n",
+ m.mmr_unused1[0],
+ m.mmr_unused1[1],
+ m.mmr_unused1[2], m.mmr_unused1[3], m.mmr_unused1[4]);
+#endif /* DEBUG_SHOW_UNUSED */
+ printk(KERN_DEBUG "dce_status: 0x%x [%s%s%s%s]\n",
+ m.mmr_dce_status,
+ (m.
+ mmr_dce_status & MMR_DCE_STATUS_RX_BUSY) ?
+ "energy detected," : "",
+ (m.
+ mmr_dce_status & MMR_DCE_STATUS_LOOPT_IND) ?
+ "loop test indicated," : "",
+ (m.
+ mmr_dce_status & MMR_DCE_STATUS_TX_BUSY) ?
+ "transmitter on," : "",
+ (m.
+ mmr_dce_status & MMR_DCE_STATUS_JBR_EXPIRED) ?
+ "jabber timer expired," : "");
+ printk(KERN_DEBUG "Dsp ID: %02X\n", m.mmr_dsp_id);
+#ifdef DEBUG_SHOW_UNUSED
+ printk(KERN_DEBUG "mmc_unused2[]: %02X:%02X\n",
+ m.mmr_unused2[0], m.mmr_unused2[1]);
+#endif /* DEBUG_SHOW_UNUSED */
+ printk(KERN_DEBUG "# correct_nwid: %d, # wrong_nwid: %d\n",
+ (m.mmr_correct_nwid_h << 8) | m.mmr_correct_nwid_l,
+ (m.mmr_wrong_nwid_h << 8) | m.mmr_wrong_nwid_l);
+ printk(KERN_DEBUG "thr_pre_set: 0x%x [current signal %s]\n",
+ m.mmr_thr_pre_set & MMR_THR_PRE_SET,
+ (m.
+ mmr_thr_pre_set & MMR_THR_PRE_SET_CUR) ? "above" :
+ "below");
+ printk(KERN_DEBUG "signal_lvl: %d [%s], ",
+ m.mmr_signal_lvl & MMR_SIGNAL_LVL,
+ (m.
+ mmr_signal_lvl & MMR_SIGNAL_LVL_VALID) ? "new msg" :
+ "no new msg");
+ printk("silence_lvl: %d [%s], ",
+ m.mmr_silence_lvl & MMR_SILENCE_LVL,
+ (m.
+ mmr_silence_lvl & MMR_SILENCE_LVL_VALID) ? "update done" :
+ "no new update");
+ printk("sgnl_qual: 0x%x [%s]\n", m.mmr_sgnl_qual & MMR_SGNL_QUAL,
+ (m.
+ mmr_sgnl_qual & MMR_SGNL_QUAL_ANT) ? "Antenna 1" :
+ "Antenna 0");
+#ifdef DEBUG_SHOW_UNUSED
+ printk(KERN_DEBUG "netw_id_l: %x\n", m.mmr_netw_id_l);
+#endif /* DEBUG_SHOW_UNUSED */
+} /* wv_mmc_show */
+#endif /* DEBUG_MMC_SHOW */
+
+#ifdef DEBUG_I82586_SHOW
+/*------------------------------------------------------------------*/
+/*
+ * Print the last block of the i82586 memory.
+ */
+static void wv_scb_show(unsigned long ioaddr)
+{
+ scb_t scb;
+
+ obram_read(ioaddr, OFFSET_SCB, (unsigned char *) &scb,
+ sizeof(scb));
+
+ printk(KERN_DEBUG "##### WaveLAN system control block: #####\n");
+
+ printk(KERN_DEBUG "status: ");
+ printk("stat 0x%x[%s%s%s%s] ",
+ (scb.
+ scb_status & (SCB_ST_CX | SCB_ST_FR | SCB_ST_CNA |
+ SCB_ST_RNR)) >> 12,
+ (scb.
+ scb_status & SCB_ST_CX) ? "command completion interrupt," :
+ "", (scb.scb_status & SCB_ST_FR) ? "frame received," : "",
+ (scb.
+ scb_status & SCB_ST_CNA) ? "command unit not active," : "",
+ (scb.
+ scb_status & SCB_ST_RNR) ? "receiving unit not ready," :
+ "");
+ printk("cus 0x%x[%s%s%s] ", (scb.scb_status & SCB_ST_CUS) >> 8,
+ ((scb.scb_status & SCB_ST_CUS) ==
+ SCB_ST_CUS_IDLE) ? "idle" : "",
+ ((scb.scb_status & SCB_ST_CUS) ==
+ SCB_ST_CUS_SUSP) ? "suspended" : "",
+ ((scb.scb_status & SCB_ST_CUS) ==
+ SCB_ST_CUS_ACTV) ? "active" : "");
+ printk("rus 0x%x[%s%s%s%s]\n", (scb.scb_status & SCB_ST_RUS) >> 4,
+ ((scb.scb_status & SCB_ST_RUS) ==
+ SCB_ST_RUS_IDLE) ? "idle" : "",
+ ((scb.scb_status & SCB_ST_RUS) ==
+ SCB_ST_RUS_SUSP) ? "suspended" : "",
+ ((scb.scb_status & SCB_ST_RUS) ==
+ SCB_ST_RUS_NRES) ? "no resources" : "",
+ ((scb.scb_status & SCB_ST_RUS) ==
+ SCB_ST_RUS_RDY) ? "ready" : "");
+
+ printk(KERN_DEBUG "command: ");
+ printk("ack 0x%x[%s%s%s%s] ",
+ (scb.
+ scb_command & (SCB_CMD_ACK_CX | SCB_CMD_ACK_FR |
+ SCB_CMD_ACK_CNA | SCB_CMD_ACK_RNR)) >> 12,
+ (scb.
+ scb_command & SCB_CMD_ACK_CX) ? "ack cmd completion," : "",
+ (scb.
+ scb_command & SCB_CMD_ACK_FR) ? "ack frame received," : "",
+ (scb.
+ scb_command & SCB_CMD_ACK_CNA) ? "ack CU not active," : "",
+ (scb.
+ scb_command & SCB_CMD_ACK_RNR) ? "ack RU not ready," : "");
+ printk("cuc 0x%x[%s%s%s%s%s] ",
+ (scb.scb_command & SCB_CMD_CUC) >> 8,
+ ((scb.scb_command & SCB_CMD_CUC) ==
+ SCB_CMD_CUC_NOP) ? "nop" : "",
+ ((scb.scb_command & SCB_CMD_CUC) ==
+ SCB_CMD_CUC_GO) ? "start cbl_offset" : "",
+ ((scb.scb_command & SCB_CMD_CUC) ==
+ SCB_CMD_CUC_RES) ? "resume execution" : "",
+ ((scb.scb_command & SCB_CMD_CUC) ==
+ SCB_CMD_CUC_SUS) ? "suspend execution" : "",
+ ((scb.scb_command & SCB_CMD_CUC) ==
+ SCB_CMD_CUC_ABT) ? "abort execution" : "");
+ printk("ruc 0x%x[%s%s%s%s%s]\n",
+ (scb.scb_command & SCB_CMD_RUC) >> 4,
+ ((scb.scb_command & SCB_CMD_RUC) ==
+ SCB_CMD_RUC_NOP) ? "nop" : "",
+ ((scb.scb_command & SCB_CMD_RUC) ==
+ SCB_CMD_RUC_GO) ? "start rfa_offset" : "",
+ ((scb.scb_command & SCB_CMD_RUC) ==
+ SCB_CMD_RUC_RES) ? "resume reception" : "",
+ ((scb.scb_command & SCB_CMD_RUC) ==
+ SCB_CMD_RUC_SUS) ? "suspend reception" : "",
+ ((scb.scb_command & SCB_CMD_RUC) ==
+ SCB_CMD_RUC_ABT) ? "abort reception" : "");
+
+ printk(KERN_DEBUG "cbl_offset 0x%x ", scb.scb_cbl_offset);
+ printk("rfa_offset 0x%x\n", scb.scb_rfa_offset);
+
+ printk(KERN_DEBUG "crcerrs %d ", scb.scb_crcerrs);
+ printk("alnerrs %d ", scb.scb_alnerrs);
+ printk("rscerrs %d ", scb.scb_rscerrs);
+ printk("ovrnerrs %d\n", scb.scb_ovrnerrs);
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Print the formatted status of the i82586's receive unit.
+ */
+static void wv_ru_show(struct net_device * dev)
+{
+ /* net_local *lp = (net_local *) dev->priv; */
+
+ printk(KERN_DEBUG
+ "##### WaveLAN i82586 receiver unit status: #####\n");
+ printk(KERN_DEBUG "ru:");
+ /*
+ * Not implemented yet
+ */
+ printk("\n");
+} /* wv_ru_show */
+
+/*------------------------------------------------------------------*/
+/*
+ * Display info about one control block of the i82586 memory.
+ */
+static void wv_cu_show_one(struct net_device * dev, net_local * lp, int i, u16 p)
+{
+ unsigned long ioaddr;
+ ac_tx_t actx;
+
+ ioaddr = dev->base_addr;
+
+ printk("%d: 0x%x:", i, p);
+
+ obram_read(ioaddr, p, (unsigned char *) &actx, sizeof(actx));
+ printk(" status=0x%x,", actx.tx_h.ac_status);
+ printk(" command=0x%x,", actx.tx_h.ac_command);
+
+ /*
+ {
+ tbd_t tbd;
+
+ obram_read(ioaddr, actx.tx_tbd_offset, (unsigned char *)&tbd, sizeof(tbd));
+ printk(" tbd_status=0x%x,", tbd.tbd_status);
+ }
+ */
+
+ printk("|");
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Print status of the command unit of the i82586.
+ */
+static void wv_cu_show(struct net_device * dev)
+{
+ net_local *lp = (net_local *) dev->priv;
+ unsigned int i;
+ u16 p;
+
+ printk(KERN_DEBUG
+ "##### WaveLAN i82586 command unit status: #####\n");
+
+ printk(KERN_DEBUG);
+ for (i = 0, p = lp->tx_first_in_use; i < NTXBLOCKS; i++) {
+ wv_cu_show_one(dev, lp, i, p);
+
+ p += TXBLOCKZ;
+ if (p >= OFFSET_CU + NTXBLOCKS * TXBLOCKZ)
+ p -= NTXBLOCKS * TXBLOCKZ;
+ }
+ printk("\n");
+}
+#endif /* DEBUG_I82586_SHOW */
+
+#ifdef DEBUG_DEVICE_SHOW
+/*------------------------------------------------------------------*/
+/*
+ * Print the formatted status of the WaveLAN PCMCIA device driver.
+ */
+static void wv_dev_show(struct net_device * dev)
+{
+ printk(KERN_DEBUG "dev:");
+ printk(" state=%lX,", dev->state);
+ printk(" trans_start=%ld,", dev->trans_start);
+ printk(" flags=0x%x,", dev->flags);
+ printk("\n");
+} /* wv_dev_show */
+
+/*------------------------------------------------------------------*/
+/*
+ * Print the formatted status of the WaveLAN PCMCIA device driver's
+ * private information.
+ */
+static void wv_local_show(struct net_device * dev)
+{
+ net_local *lp;
+
+ lp = (net_local *) dev->priv;
+
+ printk(KERN_DEBUG "local:");
+ printk(" tx_n_in_use=%d,", lp->tx_n_in_use);
+ printk(" hacr=0x%x,", lp->hacr);
+ printk(" rx_head=0x%x,", lp->rx_head);
+ printk(" rx_last=0x%x,", lp->rx_last);
+ printk(" tx_first_free=0x%x,", lp->tx_first_free);
+ printk(" tx_first_in_use=0x%x,", lp->tx_first_in_use);
+ printk("\n");
+} /* wv_local_show */
+#endif /* DEBUG_DEVICE_SHOW */
+
+#if defined(DEBUG_RX_INFO) || defined(DEBUG_TX_INFO)
+/*------------------------------------------------------------------*/
+/*
+ * Dump packet header (and content if necessary) on the screen
+ */
+static inline void wv_packet_info(u8 * p, /* Packet to dump */
+ int length, /* Length of the packet */
+ char *msg1, /* Name of the device */
+ char *msg2)
+{ /* Name of the function */
+ int i;
+ int maxi;
+
+ printk(KERN_DEBUG
+ "%s: %s(): dest %02X:%02X:%02X:%02X:%02X:%02X, length %d\n",
+ msg1, msg2, p[0], p[1], p[2], p[3], p[4], p[5], length);
+ printk(KERN_DEBUG
+ "%s: %s(): src %02X:%02X:%02X:%02X:%02X:%02X, type 0x%02X%02X\n",
+ msg1, msg2, p[6], p[7], p[8], p[9], p[10], p[11], p[12],
+ p[13]);
+
+#ifdef DEBUG_PACKET_DUMP
+
+ printk(KERN_DEBUG "data=\"");
+
+ if ((maxi = length) > DEBUG_PACKET_DUMP)
+ maxi = DEBUG_PACKET_DUMP;
+ for (i = 14; i < maxi; i++)
+ if (p[i] >= ' ' && p[i] <= '~')
+ printk(" %c", p[i]);
+ else
+ printk("%02X", p[i]);
+ if (maxi < length)
+ printk("..");
+ printk("\"\n");
+ printk(KERN_DEBUG "\n");
+#endif /* DEBUG_PACKET_DUMP */
+}
+#endif /* defined(DEBUG_RX_INFO) || defined(DEBUG_TX_INFO) */
+
+/*------------------------------------------------------------------*/
+/*
+ * This is the information which is displayed by the driver at startup.
+ * There are lots of flags for configuring it to your liking.
+ */
+static inline void wv_init_info(struct net_device * dev)
+{
+ short ioaddr = dev->base_addr;
+ net_local *lp = (net_local *) dev->priv;
+ psa_t psa;
+ int i;
+
+ /* Read the parameter storage area */
+ psa_read(ioaddr, lp->hacr, 0, (unsigned char *) &psa, sizeof(psa));
+
+#ifdef DEBUG_PSA_SHOW
+ wv_psa_show(&psa);
+#endif
+#ifdef DEBUG_MMC_SHOW
+ wv_mmc_show(dev);
+#endif
+#ifdef DEBUG_I82586_SHOW
+ wv_cu_show(dev);
+#endif
+
+#ifdef DEBUG_BASIC_SHOW
+ /* Now, let's go for the basic stuff. */
+ printk(KERN_NOTICE "%s: WaveLAN at %#x,", dev->name, ioaddr);
+ for (i = 0; i < WAVELAN_ADDR_SIZE; i++)
+ printk("%s%02X", (i == 0) ? " " : ":", dev->dev_addr[i]);
+ printk(", IRQ %d", dev->irq);
+
+ /* Print current network ID. */
+ if (psa.psa_nwid_select)
+ printk(", nwid 0x%02X-%02X", psa.psa_nwid[0],
+ psa.psa_nwid[1]);
+ else
+ printk(", nwid off");
+
+ /* If 2.00 card */
+ if (!(mmc_in(ioaddr, mmroff(0, mmr_fee_status)) &
+ (MMR_FEE_STATUS_DWLD | MMR_FEE_STATUS_BUSY))) {
+ unsigned short freq;
+
+ /* Ask the EEPROM to read the frequency from the first area. */
+ fee_read(ioaddr, 0x00, &freq, 1);
+
+ /* Print frequency */
+ printk(", 2.00, %ld", (freq >> 6) + 2400L);
+
+ /* Hack! */
+ if (freq & 0x20)
+ printk(".5");
+ } else {
+ printk(", PC");
+ switch (psa.psa_comp_number) {
+ case PSA_COMP_PC_AT_915:
+ case PSA_COMP_PC_AT_2400:
+ printk("-AT");
+ break;
+ case PSA_COMP_PC_MC_915:
+ case PSA_COMP_PC_MC_2400:
+ printk("-MC");
+ break;
+ case PSA_COMP_PCMCIA_915:
+ printk("MCIA");
+ break;
+ default:
+ printk("?");
+ }
+ printk(", ");
+ switch (psa.psa_subband) {
+ case PSA_SUBBAND_915:
+ printk("915");
+ break;
+ case PSA_SUBBAND_2425:
+ printk("2425");
+ break;
+ case PSA_SUBBAND_2460:
+ printk("2460");
+ break;
+ case PSA_SUBBAND_2484:
+ printk("2484");
+ break;
+ case PSA_SUBBAND_2430_5:
+ printk("2430.5");
+ break;
+ default:
+ printk("?");
+ }
+ }
+
+ printk(" MHz\n");
+#endif /* DEBUG_BASIC_SHOW */
+
+#ifdef DEBUG_VERSION_SHOW
+ /* Print version information */
+ printk(KERN_NOTICE "%s", version);
+#endif
+} /* wv_init_info */
+
+/********************* IOCTL, STATS & RECONFIG *********************/
+/*
+ * We found here routines that are called by Linux on different
+ * occasions after the configuration and not for transmitting data
+ * These may be called when the user use ifconfig, /proc/net/dev
+ * or wireless extensions
+ */
+
+/*------------------------------------------------------------------*/
+/*
+ * Get the current Ethernet statistics. This may be called with the
+ * card open or closed.
+ * Used when the user read /proc/net/dev
+ */
+static en_stats *wavelan_get_stats(struct net_device * dev)
+{
+#ifdef DEBUG_IOCTL_TRACE
+ printk(KERN_DEBUG "%s: <>wavelan_get_stats()\n", dev->name);
+#endif
+
+ return (&((net_local *) dev->priv)->stats);
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Set or clear the multicast filter for this adaptor.
+ * num_addrs == -1 Promiscuous mode, receive all packets
+ * num_addrs == 0 Normal mode, clear multicast list
+ * num_addrs > 0 Multicast mode, receive normal and MC packets,
+ * and do best-effort filtering.
+ */
+static void wavelan_set_multicast_list(struct net_device * dev)
+{
+ net_local *lp = (net_local *) dev->priv;
+
+#ifdef DEBUG_IOCTL_TRACE
+ printk(KERN_DEBUG "%s: ->wavelan_set_multicast_list()\n",
+ dev->name);
+#endif
+
+#ifdef DEBUG_IOCTL_INFO
+ printk(KERN_DEBUG
+ "%s: wavelan_set_multicast_list(): setting Rx mode %02X to %d addresses.\n",
+ dev->name, dev->flags, dev->mc_count);
+#endif
+
+ /* Are we asking for promiscuous mode,
+ * or all multicast addresses (we don't have that!)
+ * or too many multicast addresses for the hardware filter? */
+ if ((dev->flags & IFF_PROMISC) ||
+ (dev->flags & IFF_ALLMULTI) ||
+ (dev->mc_count > I82586_MAX_MULTICAST_ADDRESSES)) {
+ /*
+ * Enable promiscuous mode: receive all packets.
+ */
+ if (!lp->promiscuous) {
+ lp->promiscuous = 1;
+ lp->mc_count = 0;
+
+ wv_82586_reconfig(dev);
+
+ /* Tell the kernel that we are doing a really bad job. */
+ dev->flags |= IFF_PROMISC;
+ }
+ } else
+ /* Are there multicast addresses to send? */
+ if (dev->mc_list != (struct dev_mc_list *) NULL) {
+ /*
+ * Disable promiscuous mode, but receive all packets
+ * in multicast list
+ */
+#ifdef MULTICAST_AVOID
+ if (lp->promiscuous || (dev->mc_count != lp->mc_count))
+#endif
+ {
+ lp->promiscuous = 0;
+ lp->mc_count = dev->mc_count;
+
+ wv_82586_reconfig(dev);
+ }
+ } else {
+ /*
+ * Switch to normal mode: disable promiscuous mode and
+ * clear the multicast list.
+ */
+ if (lp->promiscuous || lp->mc_count == 0) {
+ lp->promiscuous = 0;
+ lp->mc_count = 0;
+
+ wv_82586_reconfig(dev);
+ }
+ }
+#ifdef DEBUG_IOCTL_TRACE
+ printk(KERN_DEBUG "%s: <-wavelan_set_multicast_list()\n",
+ dev->name);
+#endif
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * This function doesn't exist.
+ * (Note : it was a nice way to test the reconfigure stuff...)
+ */
+#ifdef SET_MAC_ADDRESS
+static int wavelan_set_mac_address(struct net_device * dev, void *addr)
+{
+ struct sockaddr *mac = addr;
+
+ /* Copy the address. */
+ memcpy(dev->dev_addr, mac->sa_data, WAVELAN_ADDR_SIZE);
+
+ /* Reconfigure the beast. */
+ wv_82586_reconfig(dev);
+
+ return 0;
+}
+#endif /* SET_MAC_ADDRESS */
+
+#ifdef WIRELESS_EXT /* if wireless extensions exist in the kernel */
+
+/*------------------------------------------------------------------*/
+/*
+ * Frequency setting (for hardware capable of it)
+ * It's a bit complicated and you don't really want to look into it.
+ * (called in wavelan_ioctl)
+ */
+static inline int wv_set_frequency(unsigned long ioaddr, /* I/O port of the card */
+ iw_freq * frequency)
+{
+ const int BAND_NUM = 10; /* Number of bands */
+ long freq = 0L; /* offset to 2.4 GHz in .5 MHz */
+#ifdef DEBUG_IOCTL_INFO
+ int i;
+#endif
+
+ /* Setting by frequency */
+ /* Theoretically, you may set any frequency between
+ * the two limits with a 0.5 MHz precision. In practice,
+ * I don't want you to have trouble with local regulations.
+ */
+ if ((frequency->e == 1) &&
+ (frequency->m >= (int) 2.412e8)
+ && (frequency->m <= (int) 2.487e8)) {
+ freq = ((frequency->m / 10000) - 24000L) / 5;
+ }
+
+ /* Setting by channel (same as wfreqsel) */
+ /* Warning: each channel is 22 MHz wide, so some of the channels
+ * will interfere. */
+ if ((frequency->e == 0) && (frequency->m < BAND_NUM)) {
+ /* Get frequency offset. */
+ freq = channel_bands[frequency->m] >> 1;
+ }
+
+ /* Verify that the frequency is allowed. */
+ if (freq != 0L) {
+ u16 table[10]; /* Authorized frequency table */
+
+ /* Read the frequency table. */
+ fee_read(ioaddr, 0x71, table, 10);
+
+#ifdef DEBUG_IOCTL_INFO
+ printk(KERN_DEBUG "Frequency table: ");
+ for (i = 0; i < 10; i++) {
+ printk(" %04X", table[i]);
+ }
+ printk("\n");
+#endif
+
+ /* Look in the table to see whether the frequency is allowed. */
+ if (!(table[9 - ((freq - 24) / 16)] &
+ (1 << ((freq - 24) % 16)))) return -EINVAL; /* not allowed */
+ } else
+ return -EINVAL;
+
+ /* if we get a usable frequency */
+ if (freq != 0L) {
+ unsigned short area[16];
+ unsigned short dac[2];
+ unsigned short area_verify[16];
+ unsigned short dac_verify[2];
+ /* Corresponding gain (in the power adjust value table)
+ * See AT&T WaveLAN Data Manual, REF 407-024689/E, page 3-8
+ * and WCIN062D.DOC, page 6.2.9. */
+ unsigned short power_limit[] = { 40, 80, 120, 160, 0 };
+ int power_band = 0; /* Selected band */
+ unsigned short power_adjust; /* Correct value */
+
+ /* Search for the gain. */
+ power_band = 0;
+ while ((freq > power_limit[power_band]) &&
+ (power_limit[++power_band] != 0));
+
+ /* Read the first area. */
+ fee_read(ioaddr, 0x00, area, 16);
+
+ /* Read the DAC. */
+ fee_read(ioaddr, 0x60, dac, 2);
+
+ /* Read the new power adjust value. */
+ fee_read(ioaddr, 0x6B - (power_band >> 1), &power_adjust,
+ 1);
+ if (power_band & 0x1)
+ power_adjust >>= 8;
+ else
+ power_adjust &= 0xFF;
+
+#ifdef DEBUG_IOCTL_INFO
+ printk(KERN_DEBUG "WaveLAN EEPROM Area 1: ");
+ for (i = 0; i < 16; i++) {
+ printk(" %04X", area[i]);
+ }
+ printk("\n");
+
+ printk(KERN_DEBUG "WaveLAN EEPROM DAC: %04X %04X\n",
+ dac[0], dac[1]);
+#endif
+
+ /* Frequency offset (for info only) */
+ area[0] = ((freq << 5) & 0xFFE0) | (area[0] & 0x1F);
+
+ /* Receiver Principle main divider coefficient */
+ area[3] = (freq >> 1) + 2400L - 352L;
+ area[2] = ((freq & 0x1) << 4) | (area[2] & 0xFFEF);
+
+ /* Transmitter Main divider coefficient */
+ area[13] = (freq >> 1) + 2400L;
+ area[12] = ((freq & 0x1) << 4) | (area[2] & 0xFFEF);
+
+ /* Other parts of the area are flags, bit streams or unused. */
+
+ /* Set the value in the DAC. */
+ dac[1] = ((power_adjust >> 1) & 0x7F) | (dac[1] & 0xFF80);
+ dac[0] = ((power_adjust & 0x1) << 4) | (dac[0] & 0xFFEF);
+
+ /* Write the first area. */
+ fee_write(ioaddr, 0x00, area, 16);
+
+ /* Write the DAC. */
+ fee_write(ioaddr, 0x60, dac, 2);
+
+ /* We now should verify here that the writing of the EEPROM went OK. */
+
+ /* Reread the first area. */
+ fee_read(ioaddr, 0x00, area_verify, 16);
+
+ /* Reread the DAC. */
+ fee_read(ioaddr, 0x60, dac_verify, 2);
+
+ /* Compare. */
+ if (memcmp(area, area_verify, 16 * 2) ||
+ memcmp(dac, dac_verify, 2 * 2)) {
+#ifdef DEBUG_IOCTL_ERROR
+ printk(KERN_INFO
+ "WaveLAN: wv_set_frequency: unable to write new frequency to EEPROM(?).\n");
+#endif
+ return -EOPNOTSUPP;
+ }
+
+ /* We must download the frequency parameters to the
+ * synthesizers (from the EEPROM - area 1)
+ * Note: as the EEPROM is automatically decremented, we set the end
+ * if the area... */
+ mmc_out(ioaddr, mmwoff(0, mmw_fee_addr), 0x0F);
+ mmc_out(ioaddr, mmwoff(0, mmw_fee_ctrl),
+ MMW_FEE_CTRL_READ | MMW_FEE_CTRL_DWLD);
+
+ /* Wait until the download is finished. */
+ fee_wait(ioaddr, 100, 100);
+
+ /* We must now download the power adjust value (gain) to
+ * the synthesizers (from the EEPROM - area 7 - DAC). */
+ mmc_out(ioaddr, mmwoff(0, mmw_fee_addr), 0x61);
+ mmc_out(ioaddr, mmwoff(0, mmw_fee_ctrl),
+ MMW_FEE_CTRL_READ | MMW_FEE_CTRL_DWLD);
+
+ /* Wait for the download to finish. */
+ fee_wait(ioaddr, 100, 100);
+
+#ifdef DEBUG_IOCTL_INFO
+ /* Verification of what we have done */
+
+ printk(KERN_DEBUG "WaveLAN EEPROM Area 1: ");
+ for (i = 0; i < 16; i++) {
+ printk(" %04X", area_verify[i]);
+ }
+ printk("\n");
+
+ printk(KERN_DEBUG "WaveLAN EEPROM DAC: %04X %04X\n",
+ dac_verify[0], dac_verify[1]);
+#endif
+
+ return 0;
+ } else
+ return -EINVAL; /* Bah, never get there... */
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Give the list of available frequencies.
+ */
+static inline int wv_frequency_list(unsigned long ioaddr, /* I/O port of the card */
+ iw_freq * list, /* List of frequencies to fill */
+ int max)
+{ /* Maximum number of frequencies */
+ u16 table[10]; /* Authorized frequency table */
+ long freq = 0L; /* offset to 2.4 GHz in .5 MHz + 12 MHz */
+ int i; /* index in the table */
+ int c = 0; /* Channel number */
+
+ /* Read the frequency table. */
+ fee_read(ioaddr, 0x71 /* frequency table */ , table, 10);
+
+ /* Check all frequencies. */
+ i = 0;
+ for (freq = 0; freq < 150; freq++)
+ /* Look in the table if the frequency is allowed */
+ if (table[9 - (freq / 16)] & (1 << (freq % 16))) {
+ /* Compute approximate channel number */
+ while ((((channel_bands[c] >> 1) - 24) < freq) &&
+ (c < NELS(channel_bands)))
+ c++;
+ list[i].i = c; /* Set the list index */
+
+ /* put in the list */
+ list[i].m = (((freq + 24) * 5) + 24000L) * 10000;
+ list[i++].e = 1;
+
+ /* Check number. */
+ if (i >= max)
+ return (i);
+ }
+
+ return (i);
+}
+
+#ifdef IW_WIRELESS_SPY
+/*------------------------------------------------------------------*/
+/*
+ * Gather wireless spy statistics: for each packet, compare the source
+ * address with our list, and if they match, get the statistics.
+ * Sorry, but this function really needs the wireless extensions.
+ */
+static inline void wl_spy_gather(struct net_device * dev,
+ u8 * mac, /* MAC address */
+ u8 * stats) /* Statistics to gather */
+{
+ struct iw_quality wstats;
+
+ wstats.qual = stats[2] & MMR_SGNL_QUAL;
+ wstats.level = stats[0] & MMR_SIGNAL_LVL;
+ wstats.noise = stats[1] & MMR_SILENCE_LVL;
+ wstats.updated = 0x7;
+
+ /* Update spy records */
+ wireless_spy_update(dev, mac, &wstats);
+}
+#endif /* IW_WIRELESS_SPY */
+
+#ifdef HISTOGRAM
+/*------------------------------------------------------------------*/
+/*
+ * This function calculates a histogram of the signal level.
+ * As the noise is quite constant, it's like doing it on the SNR.
+ * We have defined a set of interval (lp->his_range), and each time
+ * the level goes in that interval, we increment the count (lp->his_sum).
+ * With this histogram you may detect if one WaveLAN is really weak,
+ * or you may also calculate the mean and standard deviation of the level.
+ */
+static inline void wl_his_gather(struct net_device * dev, u8 * stats)
+{ /* Statistics to gather */
+ net_local *lp = (net_local *) dev->priv;
+ u8 level = stats[0] & MMR_SIGNAL_LVL;
+ int i;
+
+ /* Find the correct interval. */
+ i = 0;
+ while ((i < (lp->his_number - 1))
+ && (level >= lp->his_range[i++]));
+
+ /* Increment interval counter. */
+ (lp->his_sum[i])++;
+}
+#endif /* HISTOGRAM */
+
+/*------------------------------------------------------------------*/
+/*
+ * Wireless Handler : get protocol name
+ */
+static int wavelan_get_name(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *extra)
+{
+ strcpy(wrqu->name, "WaveLAN");
+ return 0;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Wireless Handler : set NWID
+ */
+static int wavelan_set_nwid(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *extra)
+{
+ unsigned long ioaddr = dev->base_addr;
+ net_local *lp = (net_local *) dev->priv; /* lp is not unused */
+ psa_t psa;
+ mm_t m;
+ unsigned long flags;
+ int ret = 0;
+
+ /* Disable interrupts and save flags. */
+ spin_lock_irqsave(&lp->spinlock, flags);
+
+ /* Set NWID in WaveLAN. */
+ if (!wrqu->nwid.disabled) {
+ /* Set NWID in psa */
+ psa.psa_nwid[0] = (wrqu->nwid.value & 0xFF00) >> 8;
+ psa.psa_nwid[1] = wrqu->nwid.value & 0xFF;
+ psa.psa_nwid_select = 0x01;
+ psa_write(ioaddr, lp->hacr,
+ (char *) psa.psa_nwid - (char *) &psa,
+ (unsigned char *) psa.psa_nwid, 3);
+
+ /* Set NWID in mmc. */
+ m.w.mmw_netw_id_l = psa.psa_nwid[1];
+ m.w.mmw_netw_id_h = psa.psa_nwid[0];
+ mmc_write(ioaddr,
+ (char *) &m.w.mmw_netw_id_l -
+ (char *) &m,
+ (unsigned char *) &m.w.mmw_netw_id_l, 2);
+ mmc_out(ioaddr, mmwoff(0, mmw_loopt_sel), 0x00);
+ } else {
+ /* Disable NWID in the psa. */
+ psa.psa_nwid_select = 0x00;
+ psa_write(ioaddr, lp->hacr,
+ (char *) &psa.psa_nwid_select -
+ (char *) &psa,
+ (unsigned char *) &psa.psa_nwid_select,
+ 1);
+
+ /* Disable NWID in the mmc (no filtering). */
+ mmc_out(ioaddr, mmwoff(0, mmw_loopt_sel),
+ MMW_LOOPT_SEL_DIS_NWID);
+ }
+ /* update the Wavelan checksum */
+ update_psa_checksum(dev, ioaddr, lp->hacr);
+
+ /* Enable interrupts and restore flags. */
+ spin_unlock_irqrestore(&lp->spinlock, flags);
+
+ return ret;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Wireless Handler : get NWID
+ */
+static int wavelan_get_nwid(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *extra)
+{
+ unsigned long ioaddr = dev->base_addr;
+ net_local *lp = (net_local *) dev->priv; /* lp is not unused */
+ psa_t psa;
+ unsigned long flags;
+ int ret = 0;
+
+ /* Disable interrupts and save flags. */
+ spin_lock_irqsave(&lp->spinlock, flags);
+
+ /* Read the NWID. */
+ psa_read(ioaddr, lp->hacr,
+ (char *) psa.psa_nwid - (char *) &psa,
+ (unsigned char *) psa.psa_nwid, 3);
+ wrqu->nwid.value = (psa.psa_nwid[0] << 8) + psa.psa_nwid[1];
+ wrqu->nwid.disabled = !(psa.psa_nwid_select);
+ wrqu->nwid.fixed = 1; /* Superfluous */
+
+ /* Enable interrupts and restore flags. */
+ spin_unlock_irqrestore(&lp->spinlock, flags);
+
+ return ret;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Wireless Handler : set frequency
+ */
+static int wavelan_set_freq(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *extra)
+{
+ unsigned long ioaddr = dev->base_addr;
+ net_local *lp = (net_local *) dev->priv; /* lp is not unused */
+ unsigned long flags;
+ int ret;
+
+ /* Disable interrupts and save flags. */
+ spin_lock_irqsave(&lp->spinlock, flags);
+
+ /* Attempt to recognise 2.00 cards (2.4 GHz frequency selectable). */
+ if (!(mmc_in(ioaddr, mmroff(0, mmr_fee_status)) &
+ (MMR_FEE_STATUS_DWLD | MMR_FEE_STATUS_BUSY)))
+ ret = wv_set_frequency(ioaddr, &(wrqu->freq));
+ else
+ ret = -EOPNOTSUPP;
+
+ /* Enable interrupts and restore flags. */
+ spin_unlock_irqrestore(&lp->spinlock, flags);
+
+ return ret;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Wireless Handler : get frequency
+ */
+static int wavelan_get_freq(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *extra)
+{
+ unsigned long ioaddr = dev->base_addr;
+ net_local *lp = (net_local *) dev->priv; /* lp is not unused */
+ psa_t psa;
+ unsigned long flags;
+ int ret = 0;
+
+ /* Disable interrupts and save flags. */
+ spin_lock_irqsave(&lp->spinlock, flags);
+
+ /* Attempt to recognise 2.00 cards (2.4 GHz frequency selectable).
+ * Does it work for everybody, especially old cards? */
+ if (!(mmc_in(ioaddr, mmroff(0, mmr_fee_status)) &
+ (MMR_FEE_STATUS_DWLD | MMR_FEE_STATUS_BUSY))) {
+ unsigned short freq;
+
+ /* Ask the EEPROM to read the frequency from the first area. */
+ fee_read(ioaddr, 0x00, &freq, 1);
+ wrqu->freq.m = ((freq >> 5) * 5 + 24000L) * 10000;
+ wrqu->freq.e = 1;
+ } else {
+ psa_read(ioaddr, lp->hacr,
+ (char *) &psa.psa_subband - (char *) &psa,
+ (unsigned char *) &psa.psa_subband, 1);
+
+ if (psa.psa_subband <= 4) {
+ wrqu->freq.m = fixed_bands[psa.psa_subband];
+ wrqu->freq.e = (psa.psa_subband != 0);
+ } else
+ ret = -EOPNOTSUPP;
+ }
+
+ /* Enable interrupts and restore flags. */
+ spin_unlock_irqrestore(&lp->spinlock, flags);
+
+ return ret;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Wireless Handler : set level threshold
+ */
+static int wavelan_set_sens(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *extra)
+{
+ unsigned long ioaddr = dev->base_addr;
+ net_local *lp = (net_local *) dev->priv; /* lp is not unused */
+ psa_t psa;
+ unsigned long flags;
+ int ret = 0;
+
+ /* Disable interrupts and save flags. */
+ spin_lock_irqsave(&lp->spinlock, flags);
+
+ /* Set the level threshold. */
+ /* We should complain loudly if wrqu->sens.fixed = 0, because we
+ * can't set auto mode... */
+ psa.psa_thr_pre_set = wrqu->sens.value & 0x3F;
+ psa_write(ioaddr, lp->hacr,
+ (char *) &psa.psa_thr_pre_set - (char *) &psa,
+ (unsigned char *) &psa.psa_thr_pre_set, 1);
+ /* update the Wavelan checksum */
+ update_psa_checksum(dev, ioaddr, lp->hacr);
+ mmc_out(ioaddr, mmwoff(0, mmw_thr_pre_set),
+ psa.psa_thr_pre_set);
+
+ /* Enable interrupts and restore flags. */
+ spin_unlock_irqrestore(&lp->spinlock, flags);
+
+ return ret;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Wireless Handler : get level threshold
+ */
+static int wavelan_get_sens(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *extra)
+{
+ unsigned long ioaddr = dev->base_addr;
+ net_local *lp = (net_local *) dev->priv; /* lp is not unused */
+ psa_t psa;
+ unsigned long flags;
+ int ret = 0;
+
+ /* Disable interrupts and save flags. */
+ spin_lock_irqsave(&lp->spinlock, flags);
+
+ /* Read the level threshold. */
+ psa_read(ioaddr, lp->hacr,
+ (char *) &psa.psa_thr_pre_set - (char *) &psa,
+ (unsigned char *) &psa.psa_thr_pre_set, 1);
+ wrqu->sens.value = psa.psa_thr_pre_set & 0x3F;
+ wrqu->sens.fixed = 1;
+
+ /* Enable interrupts and restore flags. */
+ spin_unlock_irqrestore(&lp->spinlock, flags);
+
+ return ret;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Wireless Handler : set encryption key
+ */
+static int wavelan_set_encode(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *extra)
+{
+ unsigned long ioaddr = dev->base_addr;
+ net_local *lp = (net_local *) dev->priv; /* lp is not unused */
+ unsigned long flags;
+ psa_t psa;
+ int ret = 0;
+
+ /* Disable interrupts and save flags. */
+ spin_lock_irqsave(&lp->spinlock, flags);
+
+ /* Check if capable of encryption */
+ if (!mmc_encr(ioaddr)) {
+ ret = -EOPNOTSUPP;
+ }
+
+ /* Check the size of the key */
+ if((wrqu->encoding.length != 8) && (wrqu->encoding.length != 0)) {
+ ret = -EINVAL;
+ }
+
+ if(!ret) {
+ /* Basic checking... */
+ if (wrqu->encoding.length == 8) {
+ /* Copy the key in the driver */
+ memcpy(psa.psa_encryption_key, extra,
+ wrqu->encoding.length);
+ psa.psa_encryption_select = 1;
+
+ psa_write(ioaddr, lp->hacr,
+ (char *) &psa.psa_encryption_select -
+ (char *) &psa,
+ (unsigned char *) &psa.
+ psa_encryption_select, 8 + 1);
+
+ mmc_out(ioaddr, mmwoff(0, mmw_encr_enable),
+ MMW_ENCR_ENABLE_EN | MMW_ENCR_ENABLE_MODE);
+ mmc_write(ioaddr, mmwoff(0, mmw_encr_key),
+ (unsigned char *) &psa.
+ psa_encryption_key, 8);
+ }
+
+ /* disable encryption */
+ if (wrqu->encoding.flags & IW_ENCODE_DISABLED) {
+ psa.psa_encryption_select = 0;
+ psa_write(ioaddr, lp->hacr,
+ (char *) &psa.psa_encryption_select -
+ (char *) &psa,
+ (unsigned char *) &psa.
+ psa_encryption_select, 1);
+
+ mmc_out(ioaddr, mmwoff(0, mmw_encr_enable), 0);
+ }
+ /* update the Wavelan checksum */
+ update_psa_checksum(dev, ioaddr, lp->hacr);
+ }
+
+ /* Enable interrupts and restore flags. */
+ spin_unlock_irqrestore(&lp->spinlock, flags);
+
+ return ret;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Wireless Handler : get encryption key
+ */
+static int wavelan_get_encode(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *extra)
+{
+ unsigned long ioaddr = dev->base_addr;
+ net_local *lp = (net_local *) dev->priv; /* lp is not unused */
+ psa_t psa;
+ unsigned long flags;
+ int ret = 0;
+
+ /* Disable interrupts and save flags. */
+ spin_lock_irqsave(&lp->spinlock, flags);
+
+ /* Check if encryption is available */
+ if (!mmc_encr(ioaddr)) {
+ ret = -EOPNOTSUPP;
+ } else {
+ /* Read the encryption key */
+ psa_read(ioaddr, lp->hacr,
+ (char *) &psa.psa_encryption_select -
+ (char *) &psa,
+ (unsigned char *) &psa.
+ psa_encryption_select, 1 + 8);
+
+ /* encryption is enabled ? */
+ if (psa.psa_encryption_select)
+ wrqu->encoding.flags = IW_ENCODE_ENABLED;
+ else
+ wrqu->encoding.flags = IW_ENCODE_DISABLED;
+ wrqu->encoding.flags |= mmc_encr(ioaddr);
+
+ /* Copy the key to the user buffer */
+ wrqu->encoding.length = 8;
+ memcpy(extra, psa.psa_encryption_key, wrqu->encoding.length);
+ }
+
+ /* Enable interrupts and restore flags. */
+ spin_unlock_irqrestore(&lp->spinlock, flags);
+
+ return ret;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Wireless Handler : get range info
+ */
+static int wavelan_get_range(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *extra)
+{
+ unsigned long ioaddr = dev->base_addr;
+ net_local *lp = (net_local *) dev->priv; /* lp is not unused */
+ struct iw_range *range = (struct iw_range *) extra;
+ unsigned long flags;
+ int ret = 0;
+
+ /* Set the length (very important for backward compatibility) */
+ wrqu->data.length = sizeof(struct iw_range);
+
+ /* Set all the info we don't care or don't know about to zero */
+ memset(range, 0, sizeof(struct iw_range));
+
+ /* Set the Wireless Extension versions */
+ range->we_version_compiled = WIRELESS_EXT;
+ range->we_version_source = 9;
+
+ /* Set information in the range struct. */
+ range->throughput = 1.6 * 1000 * 1000; /* don't argue on this ! */
+ range->min_nwid = 0x0000;
+ range->max_nwid = 0xFFFF;
+
+ range->sensitivity = 0x3F;
+ range->max_qual.qual = MMR_SGNL_QUAL;
+ range->max_qual.level = MMR_SIGNAL_LVL;
+ range->max_qual.noise = MMR_SILENCE_LVL;
+ range->avg_qual.qual = MMR_SGNL_QUAL; /* Always max */
+ /* Need to get better values for those two */
+ range->avg_qual.level = 30;
+ range->avg_qual.noise = 8;
+
+ range->num_bitrates = 1;
+ range->bitrate[0] = 2000000; /* 2 Mb/s */
+
+ /* Event capability (kernel + driver) */
+ range->event_capa[0] = (IW_EVENT_CAPA_MASK(0x8B02) |
+ IW_EVENT_CAPA_MASK(0x8B04));
+ range->event_capa[1] = IW_EVENT_CAPA_K_1;
+
+ /* Disable interrupts and save flags. */
+ spin_lock_irqsave(&lp->spinlock, flags);
+
+ /* Attempt to recognise 2.00 cards (2.4 GHz frequency selectable). */
+ if (!(mmc_in(ioaddr, mmroff(0, mmr_fee_status)) &
+ (MMR_FEE_STATUS_DWLD | MMR_FEE_STATUS_BUSY))) {
+ range->num_channels = 10;
+ range->num_frequency = wv_frequency_list(ioaddr, range->freq,
+ IW_MAX_FREQUENCIES);
+ } else
+ range->num_channels = range->num_frequency = 0;
+
+ /* Encryption supported ? */
+ if (mmc_encr(ioaddr)) {
+ range->encoding_size[0] = 8; /* DES = 64 bits key */
+ range->num_encoding_sizes = 1;
+ range->max_encoding_tokens = 1; /* Only one key possible */
+ } else {
+ range->num_encoding_sizes = 0;
+ range->max_encoding_tokens = 0;
+ }
+
+ /* Enable interrupts and restore flags. */
+ spin_unlock_irqrestore(&lp->spinlock, flags);
+
+ return ret;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Wireless Private Handler : set quality threshold
+ */
+static int wavelan_set_qthr(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *extra)
+{
+ unsigned long ioaddr = dev->base_addr;
+ net_local *lp = (net_local *) dev->priv; /* lp is not unused */
+ psa_t psa;
+ unsigned long flags;
+
+ /* Disable interrupts and save flags. */
+ spin_lock_irqsave(&lp->spinlock, flags);
+
+ psa.psa_quality_thr = *(extra) & 0x0F;
+ psa_write(ioaddr, lp->hacr,
+ (char *) &psa.psa_quality_thr - (char *) &psa,
+ (unsigned char *) &psa.psa_quality_thr, 1);
+ /* update the Wavelan checksum */
+ update_psa_checksum(dev, ioaddr, lp->hacr);
+ mmc_out(ioaddr, mmwoff(0, mmw_quality_thr),
+ psa.psa_quality_thr);
+
+ /* Enable interrupts and restore flags. */
+ spin_unlock_irqrestore(&lp->spinlock, flags);
+
+ return 0;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Wireless Private Handler : get quality threshold
+ */
+static int wavelan_get_qthr(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *extra)
+{
+ unsigned long ioaddr = dev->base_addr;
+ net_local *lp = (net_local *) dev->priv; /* lp is not unused */
+ psa_t psa;
+ unsigned long flags;
+
+ /* Disable interrupts and save flags. */
+ spin_lock_irqsave(&lp->spinlock, flags);
+
+ psa_read(ioaddr, lp->hacr,
+ (char *) &psa.psa_quality_thr - (char *) &psa,
+ (unsigned char *) &psa.psa_quality_thr, 1);
+ *(extra) = psa.psa_quality_thr & 0x0F;
+
+ /* Enable interrupts and restore flags. */
+ spin_unlock_irqrestore(&lp->spinlock, flags);
+
+ return 0;
+}
+
+#ifdef HISTOGRAM
+/*------------------------------------------------------------------*/
+/*
+ * Wireless Private Handler : set histogram
+ */
+static int wavelan_set_histo(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *extra)
+{
+ net_local *lp = (net_local *) dev->priv; /* lp is not unused */
+
+ /* Check the number of intervals. */
+ if (wrqu->data.length > 16) {
+ return(-E2BIG);
+ }
+
+ /* Disable histo while we copy the addresses.
+ * As we don't disable interrupts, we need to do this */
+ lp->his_number = 0;
+
+ /* Are there ranges to copy? */
+ if (wrqu->data.length > 0) {
+ /* Copy interval ranges to the driver */
+ memcpy(lp->his_range, extra, wrqu->data.length);
+
+ {
+ int i;
+ printk(KERN_DEBUG "Histo :");
+ for(i = 0; i < wrqu->data.length; i++)
+ printk(" %d", lp->his_range[i]);
+ printk("\n");
+ }
+
+ /* Reset result structure. */
+ memset(lp->his_sum, 0x00, sizeof(long) * 16);
+ }
+
+ /* Now we can set the number of ranges */
+ lp->his_number = wrqu->data.length;
+
+ return(0);
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Wireless Private Handler : get histogram
+ */
+static int wavelan_get_histo(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *extra)
+{
+ net_local *lp = (net_local *) dev->priv; /* lp is not unused */
+
+ /* Set the number of intervals. */
+ wrqu->data.length = lp->his_number;
+
+ /* Give back the distribution statistics */
+ if(lp->his_number > 0)
+ memcpy(extra, lp->his_sum, sizeof(long) * lp->his_number);
+
+ return(0);
+}
+#endif /* HISTOGRAM */
+
+/*------------------------------------------------------------------*/
+/*
+ * Structures to export the Wireless Handlers
+ */
+
+static const iw_handler wavelan_handler[] =
+{
+ NULL, /* SIOCSIWNAME */
+ wavelan_get_name, /* SIOCGIWNAME */
+ wavelan_set_nwid, /* SIOCSIWNWID */
+ wavelan_get_nwid, /* SIOCGIWNWID */
+ wavelan_set_freq, /* SIOCSIWFREQ */
+ wavelan_get_freq, /* SIOCGIWFREQ */
+ NULL, /* SIOCSIWMODE */
+ NULL, /* SIOCGIWMODE */
+ wavelan_set_sens, /* SIOCSIWSENS */
+ wavelan_get_sens, /* SIOCGIWSENS */
+ NULL, /* SIOCSIWRANGE */
+ wavelan_get_range, /* SIOCGIWRANGE */
+ NULL, /* SIOCSIWPRIV */
+ NULL, /* SIOCGIWPRIV */
+ NULL, /* SIOCSIWSTATS */
+ NULL, /* SIOCGIWSTATS */
+ iw_handler_set_spy, /* SIOCSIWSPY */
+ iw_handler_get_spy, /* SIOCGIWSPY */
+ iw_handler_set_thrspy, /* SIOCSIWTHRSPY */
+ iw_handler_get_thrspy, /* SIOCGIWTHRSPY */
+ NULL, /* SIOCSIWAP */
+ NULL, /* SIOCGIWAP */
+ NULL, /* -- hole -- */
+ NULL, /* SIOCGIWAPLIST */
+ NULL, /* -- hole -- */
+ NULL, /* -- hole -- */
+ NULL, /* SIOCSIWESSID */
+ NULL, /* SIOCGIWESSID */
+ NULL, /* SIOCSIWNICKN */
+ NULL, /* SIOCGIWNICKN */
+ NULL, /* -- hole -- */
+ NULL, /* -- hole -- */
+ NULL, /* SIOCSIWRATE */
+ NULL, /* SIOCGIWRATE */
+ NULL, /* SIOCSIWRTS */
+ NULL, /* SIOCGIWRTS */
+ NULL, /* SIOCSIWFRAG */
+ NULL, /* SIOCGIWFRAG */
+ NULL, /* SIOCSIWTXPOW */
+ NULL, /* SIOCGIWTXPOW */
+ NULL, /* SIOCSIWRETRY */
+ NULL, /* SIOCGIWRETRY */
+ /* Bummer ! Why those are only at the end ??? */
+ wavelan_set_encode, /* SIOCSIWENCODE */
+ wavelan_get_encode, /* SIOCGIWENCODE */
+};
+
+static const iw_handler wavelan_private_handler[] =
+{
+ wavelan_set_qthr, /* SIOCIWFIRSTPRIV */
+ wavelan_get_qthr, /* SIOCIWFIRSTPRIV + 1 */
+#ifdef HISTOGRAM
+ wavelan_set_histo, /* SIOCIWFIRSTPRIV + 2 */
+ wavelan_get_histo, /* SIOCIWFIRSTPRIV + 3 */
+#endif /* HISTOGRAM */
+};
+
+static const struct iw_priv_args wavelan_private_args[] = {
+/*{ cmd, set_args, get_args, name } */
+ { SIOCSIPQTHR, IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1, 0, "setqualthr" },
+ { SIOCGIPQTHR, 0, IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1, "getqualthr" },
+ { SIOCSIPHISTO, IW_PRIV_TYPE_BYTE | 16, 0, "sethisto" },
+ { SIOCGIPHISTO, 0, IW_PRIV_TYPE_INT | 16, "gethisto" },
+};
+
+static const struct iw_handler_def wavelan_handler_def =
+{
+ .num_standard = sizeof(wavelan_handler)/sizeof(iw_handler),
+ .num_private = sizeof(wavelan_private_handler)/sizeof(iw_handler),
+ .num_private_args = sizeof(wavelan_private_args)/sizeof(struct iw_priv_args),
+ .standard = wavelan_handler,
+ .private = wavelan_private_handler,
+ .private_args = wavelan_private_args,
+ .get_wireless_stats = wavelan_get_wireless_stats,
+};
+
+/*------------------------------------------------------------------*/
+/*
+ * Get wireless statistics.
+ * Called by /proc/net/wireless
+ */
+static iw_stats *wavelan_get_wireless_stats(struct net_device * dev)
+{
+ unsigned long ioaddr = dev->base_addr;
+ net_local *lp = (net_local *) dev->priv;
+ mmr_t m;
+ iw_stats *wstats;
+ unsigned long flags;
+
+#ifdef DEBUG_IOCTL_TRACE
+ printk(KERN_DEBUG "%s: ->wavelan_get_wireless_stats()\n",
+ dev->name);
+#endif
+
+ /* Check */
+ if (lp == (net_local *) NULL)
+ return (iw_stats *) NULL;
+
+ /* Disable interrupts and save flags. */
+ spin_lock_irqsave(&lp->spinlock, flags);
+
+ wstats = &lp->wstats;
+
+ /* Get data from the mmc. */
+ mmc_out(ioaddr, mmwoff(0, mmw_freeze), 1);
+
+ mmc_read(ioaddr, mmroff(0, mmr_dce_status), &m.mmr_dce_status, 1);
+ mmc_read(ioaddr, mmroff(0, mmr_wrong_nwid_l), &m.mmr_wrong_nwid_l,
+ 2);
+ mmc_read(ioaddr, mmroff(0, mmr_thr_pre_set), &m.mmr_thr_pre_set,
+ 4);
+
+ mmc_out(ioaddr, mmwoff(0, mmw_freeze), 0);
+
+ /* Copy data to wireless stuff. */
+ wstats->status = m.mmr_dce_status & MMR_DCE_STATUS;
+ wstats->qual.qual = m.mmr_sgnl_qual & MMR_SGNL_QUAL;
+ wstats->qual.level = m.mmr_signal_lvl & MMR_SIGNAL_LVL;
+ wstats->qual.noise = m.mmr_silence_lvl & MMR_SILENCE_LVL;
+ wstats->qual.updated = (((m. mmr_signal_lvl & MMR_SIGNAL_LVL_VALID) >> 7)
+ | ((m.mmr_signal_lvl & MMR_SIGNAL_LVL_VALID) >> 6)
+ | ((m.mmr_silence_lvl & MMR_SILENCE_LVL_VALID) >> 5));
+ wstats->discard.nwid += (m.mmr_wrong_nwid_h << 8) | m.mmr_wrong_nwid_l;
+ wstats->discard.code = 0L;
+ wstats->discard.misc = 0L;
+
+ /* Enable interrupts and restore flags. */
+ spin_unlock_irqrestore(&lp->spinlock, flags);
+
+#ifdef DEBUG_IOCTL_TRACE
+ printk(KERN_DEBUG "%s: <-wavelan_get_wireless_stats()\n",
+ dev->name);
+#endif
+ return &lp->wstats;
+}
+#endif /* WIRELESS_EXT */
+
+/************************* PACKET RECEPTION *************************/
+/*
+ * This part deals with receiving the packets.
+ * The interrupt handler gets an interrupt when a packet has been
+ * successfully received and calls this part.
+ */
+
+/*------------------------------------------------------------------*/
+/*
+ * This routine does the actual copying of data (including the Ethernet
+ * header structure) from the WaveLAN card to an sk_buff chain that
+ * will be passed up to the network interface layer. NOTE: we
+ * currently don't handle trailer protocols (neither does the rest of
+ * the network interface), so if that is needed, it will (at least in
+ * part) be added here. The contents of the receive ring buffer are
+ * copied to a message chain that is then passed to the kernel.
+ *
+ * Note: if any errors occur, the packet is "dropped on the floor".
+ * (called by wv_packet_rcv())
+ */
+static inline void
+wv_packet_read(struct net_device * dev, u16 buf_off, int sksize)
+{
+ net_local *lp = (net_local *) dev->priv;
+ unsigned long ioaddr = dev->base_addr;
+ struct sk_buff *skb;
+
+#ifdef DEBUG_RX_TRACE
+ printk(KERN_DEBUG "%s: ->wv_packet_read(0x%X, %d)\n",
+ dev->name, buf_off, sksize);
+#endif
+
+ /* Allocate buffer for the data */
+ if ((skb = dev_alloc_skb(sksize)) == (struct sk_buff *) NULL) {
+#ifdef DEBUG_RX_ERROR
+ printk(KERN_INFO
+ "%s: wv_packet_read(): could not alloc_skb(%d, GFP_ATOMIC).\n",
+ dev->name, sksize);
+#endif
+ lp->stats.rx_dropped++;
+ return;
+ }
+
+ skb->dev = dev;
+
+ /* Copy the packet to the buffer. */
+ obram_read(ioaddr, buf_off, skb_put(skb, sksize), sksize);
+ skb->protocol = eth_type_trans(skb, dev);
+
+#ifdef DEBUG_RX_INFO
+ wv_packet_info(skb->mac.raw, sksize, dev->name, "wv_packet_read");
+#endif /* DEBUG_RX_INFO */
+
+ /* Statistics-gathering and associated stuff.
+ * It seem a bit messy with all the define, but it's really
+ * simple... */
+ if (
+#ifdef IW_WIRELESS_SPY /* defined in iw_handler.h */
+ (lp->spy_data.spy_number > 0) ||
+#endif /* IW_WIRELESS_SPY */
+#ifdef HISTOGRAM
+ (lp->his_number > 0) ||
+#endif /* HISTOGRAM */
+ 0) {
+ u8 stats[3]; /* signal level, noise level, signal quality */
+
+ /* Read signal level, silence level and signal quality bytes */
+ /* Note: in the PCMCIA hardware, these are part of the frame.
+ * It seems that for the ISA hardware, it's nowhere to be
+ * found in the frame, so I'm obliged to do this (it has a
+ * side effect on /proc/net/wireless).
+ * Any ideas?
+ */
+ mmc_out(ioaddr, mmwoff(0, mmw_freeze), 1);
+ mmc_read(ioaddr, mmroff(0, mmr_signal_lvl), stats, 3);
+ mmc_out(ioaddr, mmwoff(0, mmw_freeze), 0);
+
+#ifdef DEBUG_RX_INFO
+ printk(KERN_DEBUG
+ "%s: wv_packet_read(): Signal level %d/63, Silence level %d/63, signal quality %d/16\n",
+ dev->name, stats[0] & 0x3F, stats[1] & 0x3F,
+ stats[2] & 0x0F);
+#endif
+
+ /* Spying stuff */
+#ifdef IW_WIRELESS_SPY
+ wl_spy_gather(dev, skb->mac.raw + WAVELAN_ADDR_SIZE,
+ stats);
+#endif /* IW_WIRELESS_SPY */
+#ifdef HISTOGRAM
+ wl_his_gather(dev, stats);
+#endif /* HISTOGRAM */
+ }
+
+ /*
+ * Hand the packet to the network module.
+ */
+ netif_rx(skb);
+
+ /* Keep statistics up to date */
+ dev->last_rx = jiffies;
+ lp->stats.rx_packets++;
+ lp->stats.rx_bytes += sksize;
+
+#ifdef DEBUG_RX_TRACE
+ printk(KERN_DEBUG "%s: <-wv_packet_read()\n", dev->name);
+#endif
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Transfer as many packets as we can
+ * from the device RAM.
+ * (called in wavelan_interrupt()).
+ * Note : the spinlock is already grabbed for us.
+ */
+static inline void wv_receive(struct net_device * dev)
+{
+ unsigned long ioaddr = dev->base_addr;
+ net_local *lp = (net_local *) dev->priv;
+ fd_t fd;
+ rbd_t rbd;
+ int nreaped = 0;
+
+#ifdef DEBUG_RX_TRACE
+ printk(KERN_DEBUG "%s: ->wv_receive()\n", dev->name);
+#endif
+
+ /* Loop on each received packet. */
+ for (;;) {
+ obram_read(ioaddr, lp->rx_head, (unsigned char *) &fd,
+ sizeof(fd));
+
+ /* Note about the status :
+ * It start up to be 0 (the value we set). Then, when the RU
+ * grab the buffer to prepare for reception, it sets the
+ * FD_STATUS_B flag. When the RU has finished receiving the
+ * frame, it clears FD_STATUS_B, set FD_STATUS_C to indicate
+ * completion and set the other flags to indicate the eventual
+ * errors. FD_STATUS_OK indicates that the reception was OK.
+ */
+
+ /* If the current frame is not complete, we have reached the end. */
+ if ((fd.fd_status & FD_STATUS_C) != FD_STATUS_C)
+ break; /* This is how we exit the loop. */
+
+ nreaped++;
+
+ /* Check whether frame was correctly received. */
+ if ((fd.fd_status & FD_STATUS_OK) == FD_STATUS_OK) {
+ /* Does the frame contain a pointer to the data? Let's check. */
+ if (fd.fd_rbd_offset != I82586NULL) {
+ /* Read the receive buffer descriptor */
+ obram_read(ioaddr, fd.fd_rbd_offset,
+ (unsigned char *) &rbd,
+ sizeof(rbd));
+
+#ifdef DEBUG_RX_ERROR
+ if ((rbd.rbd_status & RBD_STATUS_EOF) !=
+ RBD_STATUS_EOF) printk(KERN_INFO
+ "%s: wv_receive(): missing EOF flag.\n",
+ dev->name);
+
+ if ((rbd.rbd_status & RBD_STATUS_F) !=
+ RBD_STATUS_F) printk(KERN_INFO
+ "%s: wv_receive(): missing F flag.\n",
+ dev->name);
+#endif /* DEBUG_RX_ERROR */
+
+ /* Read the packet and transmit to Linux */
+ wv_packet_read(dev, rbd.rbd_bufl,
+ rbd.
+ rbd_status &
+ RBD_STATUS_ACNT);
+ }
+#ifdef DEBUG_RX_ERROR
+ else /* if frame has no data */
+ printk(KERN_INFO
+ "%s: wv_receive(): frame has no data.\n",
+ dev->name);
+#endif
+ } else { /* If reception was no successful */
+
+ lp->stats.rx_errors++;
+
+#ifdef DEBUG_RX_INFO
+ printk(KERN_DEBUG
+ "%s: wv_receive(): frame not received successfully (%X).\n",
+ dev->name, fd.fd_status);
+#endif
+
+#ifdef DEBUG_RX_ERROR
+ if ((fd.fd_status & FD_STATUS_S6) != 0)
+ printk(KERN_INFO
+ "%s: wv_receive(): no EOF flag.\n",
+ dev->name);
+#endif
+
+ if ((fd.fd_status & FD_STATUS_S7) != 0) {
+ lp->stats.rx_length_errors++;
+#ifdef DEBUG_RX_FAIL
+ printk(KERN_DEBUG
+ "%s: wv_receive(): frame too short.\n",
+ dev->name);
+#endif
+ }
+
+ if ((fd.fd_status & FD_STATUS_S8) != 0) {
+ lp->stats.rx_over_errors++;
+#ifdef DEBUG_RX_FAIL
+ printk(KERN_DEBUG
+ "%s: wv_receive(): rx DMA overrun.\n",
+ dev->name);
+#endif
+ }
+
+ if ((fd.fd_status & FD_STATUS_S9) != 0) {
+ lp->stats.rx_fifo_errors++;
+#ifdef DEBUG_RX_FAIL
+ printk(KERN_DEBUG
+ "%s: wv_receive(): ran out of resources.\n",
+ dev->name);
+#endif
+ }
+
+ if ((fd.fd_status & FD_STATUS_S10) != 0) {
+ lp->stats.rx_frame_errors++;
+#ifdef DEBUG_RX_FAIL
+ printk(KERN_DEBUG
+ "%s: wv_receive(): alignment error.\n",
+ dev->name);
+#endif
+ }
+
+ if ((fd.fd_status & FD_STATUS_S11) != 0) {
+ lp->stats.rx_crc_errors++;
+#ifdef DEBUG_RX_FAIL
+ printk(KERN_DEBUG
+ "%s: wv_receive(): CRC error.\n",
+ dev->name);
+#endif
+ }
+ }
+
+ fd.fd_status = 0;
+ obram_write(ioaddr, fdoff(lp->rx_head, fd_status),
+ (unsigned char *) &fd.fd_status,
+ sizeof(fd.fd_status));
+
+ fd.fd_command = FD_COMMAND_EL;
+ obram_write(ioaddr, fdoff(lp->rx_head, fd_command),
+ (unsigned char *) &fd.fd_command,
+ sizeof(fd.fd_command));
+
+ fd.fd_command = 0;
+ obram_write(ioaddr, fdoff(lp->rx_last, fd_command),
+ (unsigned char *) &fd.fd_command,
+ sizeof(fd.fd_command));
+
+ lp->rx_last = lp->rx_head;
+ lp->rx_head = fd.fd_link_offset;
+ } /* for(;;) -> loop on all frames */
+
+#ifdef DEBUG_RX_INFO
+ if (nreaped > 1)
+ printk(KERN_DEBUG "%s: wv_receive(): reaped %d\n",
+ dev->name, nreaped);
+#endif
+#ifdef DEBUG_RX_TRACE
+ printk(KERN_DEBUG "%s: <-wv_receive()\n", dev->name);
+#endif
+}
+
+/*********************** PACKET TRANSMISSION ***********************/
+/*
+ * This part deals with sending packets through the WaveLAN.
+ *
+ */
+
+/*------------------------------------------------------------------*/
+/*
+ * This routine fills in the appropriate registers and memory
+ * locations on the WaveLAN card and starts the card off on
+ * the transmit.
+ *
+ * The principle:
+ * Each block contains a transmit command, a NOP command,
+ * a transmit block descriptor and a buffer.
+ * The CU read the transmit block which point to the tbd,
+ * read the tbd and the content of the buffer.
+ * When it has finish with it, it goes to the next command
+ * which in our case is the NOP. The NOP points on itself,
+ * so the CU stop here.
+ * When we add the next block, we modify the previous nop
+ * to make it point on the new tx command.
+ * Simple, isn't it ?
+ *
+ * (called in wavelan_packet_xmit())
+ */
+static inline int wv_packet_write(struct net_device * dev, void *buf, short length)
+{
+ net_local *lp = (net_local *) dev->priv;
+ unsigned long ioaddr = dev->base_addr;
+ unsigned short txblock;
+ unsigned short txpred;
+ unsigned short tx_addr;
+ unsigned short nop_addr;
+ unsigned short tbd_addr;
+ unsigned short buf_addr;
+ ac_tx_t tx;
+ ac_nop_t nop;
+ tbd_t tbd;
+ int clen = length;
+ unsigned long flags;
+
+#ifdef DEBUG_TX_TRACE
+ printk(KERN_DEBUG "%s: ->wv_packet_write(%d)\n", dev->name,
+ length);
+#endif
+
+ spin_lock_irqsave(&lp->spinlock, flags);
+
+ /* Check nothing bad has happened */
+ if (lp->tx_n_in_use == (NTXBLOCKS - 1)) {
+#ifdef DEBUG_TX_ERROR
+ printk(KERN_INFO "%s: wv_packet_write(): Tx queue full.\n",
+ dev->name);
+#endif
+ spin_unlock_irqrestore(&lp->spinlock, flags);
+ return 1;
+ }
+
+ /* Calculate addresses of next block and previous block. */
+ txblock = lp->tx_first_free;
+ txpred = txblock - TXBLOCKZ;
+ if (txpred < OFFSET_CU)
+ txpred += NTXBLOCKS * TXBLOCKZ;
+ lp->tx_first_free += TXBLOCKZ;
+ if (lp->tx_first_free >= OFFSET_CU + NTXBLOCKS * TXBLOCKZ)
+ lp->tx_first_free -= NTXBLOCKS * TXBLOCKZ;
+
+ lp->tx_n_in_use++;
+
+ /* Calculate addresses of the different parts of the block. */
+ tx_addr = txblock;
+ nop_addr = tx_addr + sizeof(tx);
+ tbd_addr = nop_addr + sizeof(nop);
+ buf_addr = tbd_addr + sizeof(tbd);
+
+ /*
+ * Transmit command
+ */
+ tx.tx_h.ac_status = 0;
+ obram_write(ioaddr, toff(ac_tx_t, tx_addr, tx_h.ac_status),
+ (unsigned char *) &tx.tx_h.ac_status,
+ sizeof(tx.tx_h.ac_status));
+
+ /*
+ * NOP command
+ */
+ nop.nop_h.ac_status = 0;
+ obram_write(ioaddr, toff(ac_nop_t, nop_addr, nop_h.ac_status),
+ (unsigned char *) &nop.nop_h.ac_status,
+ sizeof(nop.nop_h.ac_status));
+ nop.nop_h.ac_link = nop_addr;
+ obram_write(ioaddr, toff(ac_nop_t, nop_addr, nop_h.ac_link),
+ (unsigned char *) &nop.nop_h.ac_link,
+ sizeof(nop.nop_h.ac_link));
+
+ /*
+ * Transmit buffer descriptor
+ */
+ tbd.tbd_status = TBD_STATUS_EOF | (TBD_STATUS_ACNT & clen);
+ tbd.tbd_next_bd_offset = I82586NULL;
+ tbd.tbd_bufl = buf_addr;
+ tbd.tbd_bufh = 0;
+ obram_write(ioaddr, tbd_addr, (unsigned char *) &tbd, sizeof(tbd));
+
+ /*
+ * Data
+ */
+ obram_write(ioaddr, buf_addr, buf, length);
+
+ /*
+ * Overwrite the predecessor NOP link
+ * so that it points to this txblock.
+ */
+ nop_addr = txpred + sizeof(tx);
+ nop.nop_h.ac_status = 0;
+ obram_write(ioaddr, toff(ac_nop_t, nop_addr, nop_h.ac_status),
+ (unsigned char *) &nop.nop_h.ac_status,
+ sizeof(nop.nop_h.ac_status));
+ nop.nop_h.ac_link = txblock;
+ obram_write(ioaddr, toff(ac_nop_t, nop_addr, nop_h.ac_link),
+ (unsigned char *) &nop.nop_h.ac_link,
+ sizeof(nop.nop_h.ac_link));
+
+ /* Make sure the watchdog will keep quiet for a while */
+ dev->trans_start = jiffies;
+
+ /* Keep stats up to date. */
+ lp->stats.tx_bytes += length;
+
+ if (lp->tx_first_in_use == I82586NULL)
+ lp->tx_first_in_use = txblock;
+
+ if (lp->tx_n_in_use < NTXBLOCKS - 1)
+ netif_wake_queue(dev);
+
+ spin_unlock_irqrestore(&lp->spinlock, flags);
+
+#ifdef DEBUG_TX_INFO
+ wv_packet_info((u8 *) buf, length, dev->name,
+ "wv_packet_write");
+#endif /* DEBUG_TX_INFO */
+
+#ifdef DEBUG_TX_TRACE
+ printk(KERN_DEBUG "%s: <-wv_packet_write()\n", dev->name);
+#endif
+
+ return 0;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * This routine is called when we want to send a packet (NET3 callback)
+ * In this routine, we check if the harware is ready to accept
+ * the packet. We also prevent reentrance. Then we call the function
+ * to send the packet.
+ */
+static int wavelan_packet_xmit(struct sk_buff *skb, struct net_device * dev)
+{
+ net_local *lp = (net_local *) dev->priv;
+ unsigned long flags;
+
+#ifdef DEBUG_TX_TRACE
+ printk(KERN_DEBUG "%s: ->wavelan_packet_xmit(0x%X)\n", dev->name,
+ (unsigned) skb);
+#endif
+
+ /*
+ * Block a timer-based transmit from overlapping.
+ * In other words, prevent reentering this routine.
+ */
+ netif_stop_queue(dev);
+
+ /* If somebody has asked to reconfigure the controller,
+ * we can do it now.
+ */
+ if (lp->reconfig_82586) {
+ spin_lock_irqsave(&lp->spinlock, flags);
+ wv_82586_config(dev);
+ spin_unlock_irqrestore(&lp->spinlock, flags);
+ /* Check that we can continue */
+ if (lp->tx_n_in_use == (NTXBLOCKS - 1))
+ return 1;
+ }
+#ifdef DEBUG_TX_ERROR
+ if (skb->next)
+ printk(KERN_INFO "skb has next\n");
+#endif
+
+ /* Do we need some padding? */
+ /* Note : on wireless the propagation time is in the order of 1us,
+ * and we don't have the Ethernet specific requirement of beeing
+ * able to detect collisions, therefore in theory we don't really
+ * need to pad. Jean II */
+ if (skb->len < ETH_ZLEN) {
+ skb = skb_padto(skb, ETH_ZLEN);
+ if (skb == NULL)
+ return 0;
+ }
+
+ /* Write packet on the card */
+ if(wv_packet_write(dev, skb->data, skb->len))
+ return 1; /* We failed */
+
+ dev_kfree_skb(skb);
+
+#ifdef DEBUG_TX_TRACE
+ printk(KERN_DEBUG "%s: <-wavelan_packet_xmit()\n", dev->name);
+#endif
+ return 0;
+}
+
+/*********************** HARDWARE CONFIGURATION ***********************/
+/*
+ * This part does the real job of starting and configuring the hardware.
+ */
+
+/*--------------------------------------------------------------------*/
+/*
+ * Routine to initialize the Modem Management Controller.
+ * (called by wv_hw_reset())
+ */
+static inline int wv_mmc_init(struct net_device * dev)
+{
+ unsigned long ioaddr = dev->base_addr;
+ net_local *lp = (net_local *) dev->priv;
+ psa_t psa;
+ mmw_t m;
+ int configured;
+
+#ifdef DEBUG_CONFIG_TRACE
+ printk(KERN_DEBUG "%s: ->wv_mmc_init()\n", dev->name);
+#endif
+
+ /* Read the parameter storage area. */
+ psa_read(ioaddr, lp->hacr, 0, (unsigned char *) &psa, sizeof(psa));
+
+#ifdef USE_PSA_CONFIG
+ configured = psa.psa_conf_status & 1;
+#else
+ configured = 0;
+#endif
+
+ /* Is the PSA is not configured */
+ if (!configured) {
+ /* User will be able to configure NWID later (with iwconfig). */
+ psa.psa_nwid[0] = 0;
+ psa.psa_nwid[1] = 0;
+
+ /* no NWID checking since NWID is not set */
+ psa.psa_nwid_select = 0;
+
+ /* Disable encryption */
+ psa.psa_encryption_select = 0;
+
+ /* Set to standard values:
+ * 0x04 for AT,
+ * 0x01 for MCA,
+ * 0x04 for PCMCIA and 2.00 card (AT&T 407-024689/E document)
+ */
+ if (psa.psa_comp_number & 1)
+ psa.psa_thr_pre_set = 0x01;
+ else
+ psa.psa_thr_pre_set = 0x04;
+ psa.psa_quality_thr = 0x03;
+
+ /* It is configured */
+ psa.psa_conf_status |= 1;
+
+#ifdef USE_PSA_CONFIG
+ /* Write the psa. */
+ psa_write(ioaddr, lp->hacr,
+ (char *) psa.psa_nwid - (char *) &psa,
+ (unsigned char *) psa.psa_nwid, 4);
+ psa_write(ioaddr, lp->hacr,
+ (char *) &psa.psa_thr_pre_set - (char *) &psa,
+ (unsigned char *) &psa.psa_thr_pre_set, 1);
+ psa_write(ioaddr, lp->hacr,
+ (char *) &psa.psa_quality_thr - (char *) &psa,
+ (unsigned char *) &psa.psa_quality_thr, 1);
+ psa_write(ioaddr, lp->hacr,
+ (char *) &psa.psa_conf_status - (char *) &psa,
+ (unsigned char *) &psa.psa_conf_status, 1);
+ /* update the Wavelan checksum */
+ update_psa_checksum(dev, ioaddr, lp->hacr);
+#endif
+ }
+
+ /* Zero the mmc structure. */
+ memset(&m, 0x00, sizeof(m));
+
+ /* Copy PSA info to the mmc. */
+ m.mmw_netw_id_l = psa.psa_nwid[1];
+ m.mmw_netw_id_h = psa.psa_nwid[0];
+
+ if (psa.psa_nwid_select & 1)
+ m.mmw_loopt_sel = 0x00;
+ else
+ m.mmw_loopt_sel = MMW_LOOPT_SEL_DIS_NWID;
+
+ memcpy(&m.mmw_encr_key, &psa.psa_encryption_key,
+ sizeof(m.mmw_encr_key));
+
+ if (psa.psa_encryption_select)
+ m.mmw_encr_enable =
+ MMW_ENCR_ENABLE_EN | MMW_ENCR_ENABLE_MODE;
+ else
+ m.mmw_encr_enable = 0;
+
+ m.mmw_thr_pre_set = psa.psa_thr_pre_set & 0x3F;
+ m.mmw_quality_thr = psa.psa_quality_thr & 0x0F;
+
+ /*
+ * Set default modem control parameters.
+ * See NCR document 407-0024326 Rev. A.
+ */
+ m.mmw_jabber_enable = 0x01;
+ m.mmw_freeze = 0;
+ m.mmw_anten_sel = MMW_ANTEN_SEL_ALG_EN;
+ m.mmw_ifs = 0x20;
+ m.mmw_mod_delay = 0x04;
+ m.mmw_jam_time = 0x38;
+
+ m.mmw_des_io_invert = 0;
+ m.mmw_decay_prm = 0;
+ m.mmw_decay_updat_prm = 0;
+
+ /* Write all info to MMC. */
+ mmc_write(ioaddr, 0, (u8 *) & m, sizeof(m));
+
+ /* The following code starts the modem of the 2.00 frequency
+ * selectable cards at power on. It's not strictly needed for the
+ * following boots.
+ * The original patch was by Joe Finney for the PCMCIA driver, but
+ * I've cleaned it up a bit and added documentation.
+ * Thanks to Loeke Brederveld from Lucent for the info.
+ */
+
+ /* Attempt to recognise 2.00 cards (2.4 GHz frequency selectable)
+ * Does it work for everybody, especially old cards? */
+ /* Note: WFREQSEL verifies that it is able to read a sensible
+ * frequency from EEPROM (address 0x00) and that MMR_FEE_STATUS_ID
+ * is 0xA (Xilinx version) or 0xB (Ariadne version).
+ * My test is more crude but does work. */
+ if (!(mmc_in(ioaddr, mmroff(0, mmr_fee_status)) &
+ (MMR_FEE_STATUS_DWLD | MMR_FEE_STATUS_BUSY))) {
+ /* We must download the frequency parameters to the
+ * synthesizers (from the EEPROM - area 1)
+ * Note: as the EEPROM is automatically decremented, we set the end
+ * if the area... */
+ m.mmw_fee_addr = 0x0F;
+ m.mmw_fee_ctrl = MMW_FEE_CTRL_READ | MMW_FEE_CTRL_DWLD;
+ mmc_write(ioaddr, (char *) &m.mmw_fee_ctrl - (char *) &m,
+ (unsigned char *) &m.mmw_fee_ctrl, 2);
+
+ /* Wait until the download is finished. */
+ fee_wait(ioaddr, 100, 100);
+
+#ifdef DEBUG_CONFIG_INFO
+ /* The frequency was in the last word downloaded. */
+ mmc_read(ioaddr, (char *) &m.mmw_fee_data_l - (char *) &m,
+ (unsigned char *) &m.mmw_fee_data_l, 2);
+
+ /* Print some info for the user. */
+ printk(KERN_DEBUG
+ "%s: WaveLAN 2.00 recognised (frequency select). Current frequency = %ld\n",
+ dev->name,
+ ((m.
+ mmw_fee_data_h << 4) | (m.mmw_fee_data_l >> 4)) *
+ 5 / 2 + 24000L);
+#endif
+
+ /* We must now download the power adjust value (gain) to
+ * the synthesizers (from the EEPROM - area 7 - DAC). */
+ m.mmw_fee_addr = 0x61;
+ m.mmw_fee_ctrl = MMW_FEE_CTRL_READ | MMW_FEE_CTRL_DWLD;
+ mmc_write(ioaddr, (char *) &m.mmw_fee_ctrl - (char *) &m,
+ (unsigned char *) &m.mmw_fee_ctrl, 2);
+
+ /* Wait until the download is finished. */
+ }
+ /* if 2.00 card */
+#ifdef DEBUG_CONFIG_TRACE
+ printk(KERN_DEBUG "%s: <-wv_mmc_init()\n", dev->name);
+#endif
+ return 0;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Construct the fd and rbd structures.
+ * Start the receive unit.
+ * (called by wv_hw_reset())
+ */
+static inline int wv_ru_start(struct net_device * dev)
+{
+ net_local *lp = (net_local *) dev->priv;
+ unsigned long ioaddr = dev->base_addr;
+ u16 scb_cs;
+ fd_t fd;
+ rbd_t rbd;
+ u16 rx;
+ u16 rx_next;
+ int i;
+
+#ifdef DEBUG_CONFIG_TRACE
+ printk(KERN_DEBUG "%s: ->wv_ru_start()\n", dev->name);
+#endif
+
+ obram_read(ioaddr, scboff(OFFSET_SCB, scb_status),
+ (unsigned char *) &scb_cs, sizeof(scb_cs));
+ if ((scb_cs & SCB_ST_RUS) == SCB_ST_RUS_RDY)
+ return 0;
+
+ lp->rx_head = OFFSET_RU;
+
+ for (i = 0, rx = lp->rx_head; i < NRXBLOCKS; i++, rx = rx_next) {
+ rx_next =
+ (i == NRXBLOCKS - 1) ? lp->rx_head : rx + RXBLOCKZ;
+
+ fd.fd_status = 0;
+ fd.fd_command = (i == NRXBLOCKS - 1) ? FD_COMMAND_EL : 0;
+ fd.fd_link_offset = rx_next;
+ fd.fd_rbd_offset = rx + sizeof(fd);
+ obram_write(ioaddr, rx, (unsigned char *) &fd, sizeof(fd));
+
+ rbd.rbd_status = 0;
+ rbd.rbd_next_rbd_offset = I82586NULL;
+ rbd.rbd_bufl = rx + sizeof(fd) + sizeof(rbd);
+ rbd.rbd_bufh = 0;
+ rbd.rbd_el_size = RBD_EL | (RBD_SIZE & MAXDATAZ);
+ obram_write(ioaddr, rx + sizeof(fd),
+ (unsigned char *) &rbd, sizeof(rbd));
+
+ lp->rx_last = rx;
+ }
+
+ obram_write(ioaddr, scboff(OFFSET_SCB, scb_rfa_offset),
+ (unsigned char *) &lp->rx_head, sizeof(lp->rx_head));
+
+ scb_cs = SCB_CMD_RUC_GO;
+ obram_write(ioaddr, scboff(OFFSET_SCB, scb_command),
+ (unsigned char *) &scb_cs, sizeof(scb_cs));
+
+ set_chan_attn(ioaddr, lp->hacr);
+
+ for (i = 1000; i > 0; i--) {
+ obram_read(ioaddr, scboff(OFFSET_SCB, scb_command),
+ (unsigned char *) &scb_cs, sizeof(scb_cs));
+ if (scb_cs == 0)
+ break;
+
+ udelay(10);
+ }
+
+ if (i <= 0) {
+#ifdef DEBUG_CONFIG_ERROR
+ printk(KERN_INFO
+ "%s: wavelan_ru_start(): board not accepting command.\n",
+ dev->name);
+#endif
+ return -1;
+ }
+#ifdef DEBUG_CONFIG_TRACE
+ printk(KERN_DEBUG "%s: <-wv_ru_start()\n", dev->name);
+#endif
+ return 0;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Initialise the transmit blocks.
+ * Start the command unit executing the NOP
+ * self-loop of the first transmit block.
+ *
+ * Here we create the list of send buffers used to transmit packets
+ * between the PC and the command unit. For each buffer, we create a
+ * buffer descriptor (pointing on the buffer), a transmit command
+ * (pointing to the buffer descriptor) and a NOP command.
+ * The transmit command is linked to the NOP, and the NOP to itself.
+ * When we will have finished executing the transmit command, we will
+ * then loop on the NOP. By releasing the NOP link to a new command,
+ * we may send another buffer.
+ *
+ * (called by wv_hw_reset())
+ */
+static inline int wv_cu_start(struct net_device * dev)
+{
+ net_local *lp = (net_local *) dev->priv;
+ unsigned long ioaddr = dev->base_addr;
+ int i;
+ u16 txblock;
+ u16 first_nop;
+ u16 scb_cs;
+
+#ifdef DEBUG_CONFIG_TRACE
+ printk(KERN_DEBUG "%s: ->wv_cu_start()\n", dev->name);
+#endif
+
+ lp->tx_first_free = OFFSET_CU;
+ lp->tx_first_in_use = I82586NULL;
+
+ for (i = 0, txblock = OFFSET_CU;
+ i < NTXBLOCKS; i++, txblock += TXBLOCKZ) {
+ ac_tx_t tx;
+ ac_nop_t nop;
+ tbd_t tbd;
+ unsigned short tx_addr;
+ unsigned short nop_addr;
+ unsigned short tbd_addr;
+ unsigned short buf_addr;
+
+ tx_addr = txblock;
+ nop_addr = tx_addr + sizeof(tx);
+ tbd_addr = nop_addr + sizeof(nop);
+ buf_addr = tbd_addr + sizeof(tbd);
+
+ tx.tx_h.ac_status = 0;
+ tx.tx_h.ac_command = acmd_transmit | AC_CFLD_I;
+ tx.tx_h.ac_link = nop_addr;
+ tx.tx_tbd_offset = tbd_addr;
+ obram_write(ioaddr, tx_addr, (unsigned char *) &tx,
+ sizeof(tx));
+
+ nop.nop_h.ac_status = 0;
+ nop.nop_h.ac_command = acmd_nop;
+ nop.nop_h.ac_link = nop_addr;
+ obram_write(ioaddr, nop_addr, (unsigned char *) &nop,
+ sizeof(nop));
+
+ tbd.tbd_status = TBD_STATUS_EOF;
+ tbd.tbd_next_bd_offset = I82586NULL;
+ tbd.tbd_bufl = buf_addr;
+ tbd.tbd_bufh = 0;
+ obram_write(ioaddr, tbd_addr, (unsigned char *) &tbd,
+ sizeof(tbd));
+ }
+
+ first_nop =
+ OFFSET_CU + (NTXBLOCKS - 1) * TXBLOCKZ + sizeof(ac_tx_t);
+ obram_write(ioaddr, scboff(OFFSET_SCB, scb_cbl_offset),
+ (unsigned char *) &first_nop, sizeof(first_nop));
+
+ scb_cs = SCB_CMD_CUC_GO;
+ obram_write(ioaddr, scboff(OFFSET_SCB, scb_command),
+ (unsigned char *) &scb_cs, sizeof(scb_cs));
+
+ set_chan_attn(ioaddr, lp->hacr);
+
+ for (i = 1000; i > 0; i--) {
+ obram_read(ioaddr, scboff(OFFSET_SCB, scb_command),
+ (unsigned char *) &scb_cs, sizeof(scb_cs));
+ if (scb_cs == 0)
+ break;
+
+ udelay(10);
+ }
+
+ if (i <= 0) {
+#ifdef DEBUG_CONFIG_ERROR
+ printk(KERN_INFO
+ "%s: wavelan_cu_start(): board not accepting command.\n",
+ dev->name);
+#endif
+ return -1;
+ }
+
+ lp->tx_n_in_use = 0;
+ netif_start_queue(dev);
+#ifdef DEBUG_CONFIG_TRACE
+ printk(KERN_DEBUG "%s: <-wv_cu_start()\n", dev->name);
+#endif
+ return 0;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * This routine does a standard configuration of the WaveLAN
+ * controller (i82586).
+ *
+ * It initialises the scp, iscp and scb structure
+ * The first two are just pointers to the next.
+ * The last one is used for basic configuration and for basic
+ * communication (interrupt status).
+ *
+ * (called by wv_hw_reset())
+ */
+static inline int wv_82586_start(struct net_device * dev)
+{
+ net_local *lp = (net_local *) dev->priv;
+ unsigned long ioaddr = dev->base_addr;
+ scp_t scp; /* system configuration pointer */
+ iscp_t iscp; /* intermediate scp */
+ scb_t scb; /* system control block */
+ ach_t cb; /* Action command header */
+ u8 zeroes[512];
+ int i;
+
+#ifdef DEBUG_CONFIG_TRACE
+ printk(KERN_DEBUG "%s: ->wv_82586_start()\n", dev->name);
+#endif
+
+ /*
+ * Clear the onboard RAM.
+ */
+ memset(&zeroes[0], 0x00, sizeof(zeroes));
+ for (i = 0; i < I82586_MEMZ; i += sizeof(zeroes))
+ obram_write(ioaddr, i, &zeroes[0], sizeof(zeroes));
+
+ /*
+ * Construct the command unit structures:
+ * scp, iscp, scb, cb.
+ */
+ memset(&scp, 0x00, sizeof(scp));
+ scp.scp_sysbus = SCP_SY_16BBUS;
+ scp.scp_iscpl = OFFSET_ISCP;
+ obram_write(ioaddr, OFFSET_SCP, (unsigned char *) &scp,
+ sizeof(scp));
+
+ memset(&iscp, 0x00, sizeof(iscp));
+ iscp.iscp_busy = 1;
+ iscp.iscp_offset = OFFSET_SCB;
+ obram_write(ioaddr, OFFSET_ISCP, (unsigned char *) &iscp,
+ sizeof(iscp));
+
+ /* Our first command is to reset the i82586. */
+ memset(&scb, 0x00, sizeof(scb));
+ scb.scb_command = SCB_CMD_RESET;
+ scb.scb_cbl_offset = OFFSET_CU;
+ scb.scb_rfa_offset = OFFSET_RU;
+ obram_write(ioaddr, OFFSET_SCB, (unsigned char *) &scb,
+ sizeof(scb));
+
+ set_chan_attn(ioaddr, lp->hacr);
+
+ /* Wait for command to finish. */
+ for (i = 1000; i > 0; i--) {
+ obram_read(ioaddr, OFFSET_ISCP, (unsigned char *) &iscp,
+ sizeof(iscp));
+
+ if (iscp.iscp_busy == (unsigned short) 0)
+ break;
+
+ udelay(10);
+ }
+
+ if (i <= 0) {
+#ifdef DEBUG_CONFIG_ERROR
+ printk(KERN_INFO
+ "%s: wv_82586_start(): iscp_busy timeout.\n",
+ dev->name);
+#endif
+ return -1;
+ }
+
+ /* Check command completion. */
+ for (i = 15; i > 0; i--) {
+ obram_read(ioaddr, OFFSET_SCB, (unsigned char *) &scb,
+ sizeof(scb));
+
+ if (scb.scb_status == (SCB_ST_CX | SCB_ST_CNA))
+ break;
+
+ udelay(10);
+ }
+
+ if (i <= 0) {
+#ifdef DEBUG_CONFIG_ERROR
+ printk(KERN_INFO
+ "%s: wv_82586_start(): status: expected 0x%02x, got 0x%02x.\n",
+ dev->name, SCB_ST_CX | SCB_ST_CNA, scb.scb_status);
+#endif
+ return -1;
+ }
+
+ wv_ack(dev);
+
+ /* Set the action command header. */
+ memset(&cb, 0x00, sizeof(cb));
+ cb.ac_command = AC_CFLD_EL | (AC_CFLD_CMD & acmd_diagnose);
+ cb.ac_link = OFFSET_CU;
+ obram_write(ioaddr, OFFSET_CU, (unsigned char *) &cb, sizeof(cb));
+
+ if (wv_synchronous_cmd(dev, "diag()") == -1)
+ return -1;
+
+ obram_read(ioaddr, OFFSET_CU, (unsigned char *) &cb, sizeof(cb));
+ if (cb.ac_status & AC_SFLD_FAIL) {
+#ifdef DEBUG_CONFIG_ERROR
+ printk(KERN_INFO
+ "%s: wv_82586_start(): i82586 Self Test failed.\n",
+ dev->name);
+#endif
+ return -1;
+ }
+#ifdef DEBUG_I82586_SHOW
+ wv_scb_show(ioaddr);
+#endif
+
+#ifdef DEBUG_CONFIG_TRACE
+ printk(KERN_DEBUG "%s: <-wv_82586_start()\n", dev->name);
+#endif
+ return 0;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * This routine does a standard configuration of the WaveLAN
+ * controller (i82586).
+ *
+ * This routine is a violent hack. We use the first free transmit block
+ * to make our configuration. In the buffer area, we create the three
+ * configuration commands (linked). We make the previous NOP point to
+ * the beginning of the buffer instead of the tx command. After, we go
+ * as usual to the NOP command.
+ * Note that only the last command (mc_set) will generate an interrupt.
+ *
+ * (called by wv_hw_reset(), wv_82586_reconfig(), wavelan_packet_xmit())
+ */
+static void wv_82586_config(struct net_device * dev)
+{
+ net_local *lp = (net_local *) dev->priv;
+ unsigned long ioaddr = dev->base_addr;
+ unsigned short txblock;
+ unsigned short txpred;
+ unsigned short tx_addr;
+ unsigned short nop_addr;
+ unsigned short tbd_addr;
+ unsigned short cfg_addr;
+ unsigned short ias_addr;
+ unsigned short mcs_addr;
+ ac_tx_t tx;
+ ac_nop_t nop;
+ ac_cfg_t cfg; /* Configure action */
+ ac_ias_t ias; /* IA-setup action */
+ ac_mcs_t mcs; /* Multicast setup */
+ struct dev_mc_list *dmi;
+
+#ifdef DEBUG_CONFIG_TRACE
+ printk(KERN_DEBUG "%s: ->wv_82586_config()\n", dev->name);
+#endif
+
+ /* Check nothing bad has happened */
+ if (lp->tx_n_in_use == (NTXBLOCKS - 1)) {
+#ifdef DEBUG_CONFIG_ERROR
+ printk(KERN_INFO "%s: wv_82586_config(): Tx queue full.\n",
+ dev->name);
+#endif
+ return;
+ }
+
+ /* Calculate addresses of next block and previous block. */
+ txblock = lp->tx_first_free;
+ txpred = txblock - TXBLOCKZ;
+ if (txpred < OFFSET_CU)
+ txpred += NTXBLOCKS * TXBLOCKZ;
+ lp->tx_first_free += TXBLOCKZ;
+ if (lp->tx_first_free >= OFFSET_CU + NTXBLOCKS * TXBLOCKZ)
+ lp->tx_first_free -= NTXBLOCKS * TXBLOCKZ;
+
+ lp->tx_n_in_use++;
+
+ /* Calculate addresses of the different parts of the block. */
+ tx_addr = txblock;
+ nop_addr = tx_addr + sizeof(tx);
+ tbd_addr = nop_addr + sizeof(nop);
+ cfg_addr = tbd_addr + sizeof(tbd_t); /* beginning of the buffer */
+ ias_addr = cfg_addr + sizeof(cfg);
+ mcs_addr = ias_addr + sizeof(ias);
+
+ /*
+ * Transmit command
+ */
+ tx.tx_h.ac_status = 0xFFFF; /* Fake completion value */
+ obram_write(ioaddr, toff(ac_tx_t, tx_addr, tx_h.ac_status),
+ (unsigned char *) &tx.tx_h.ac_status,
+ sizeof(tx.tx_h.ac_status));
+
+ /*
+ * NOP command
+ */
+ nop.nop_h.ac_status = 0;
+ obram_write(ioaddr, toff(ac_nop_t, nop_addr, nop_h.ac_status),
+ (unsigned char *) &nop.nop_h.ac_status,
+ sizeof(nop.nop_h.ac_status));
+ nop.nop_h.ac_link = nop_addr;
+ obram_write(ioaddr, toff(ac_nop_t, nop_addr, nop_h.ac_link),
+ (unsigned char *) &nop.nop_h.ac_link,
+ sizeof(nop.nop_h.ac_link));
+
+ /* Create a configure action. */
+ memset(&cfg, 0x00, sizeof(cfg));
+
+ /*
+ * For Linux we invert AC_CFG_ALOC() so as to conform
+ * to the way that net packets reach us from above.
+ * (See also ac_tx_t.)
+ *
+ * Updated from Wavelan Manual WCIN085B
+ */
+ cfg.cfg_byte_cnt =
+ AC_CFG_BYTE_CNT(sizeof(ac_cfg_t) - sizeof(ach_t));
+ cfg.cfg_fifolim = AC_CFG_FIFOLIM(4);
+ cfg.cfg_byte8 = AC_CFG_SAV_BF(1) | AC_CFG_SRDY(0);
+ cfg.cfg_byte9 = AC_CFG_ELPBCK(0) |
+ AC_CFG_ILPBCK(0) |
+ AC_CFG_PRELEN(AC_CFG_PLEN_2) |
+ AC_CFG_ALOC(1) | AC_CFG_ADDRLEN(WAVELAN_ADDR_SIZE);
+ cfg.cfg_byte10 = AC_CFG_BOFMET(1) |
+ AC_CFG_ACR(6) | AC_CFG_LINPRIO(0);
+ cfg.cfg_ifs = 0x20;
+ cfg.cfg_slotl = 0x0C;
+ cfg.cfg_byte13 = AC_CFG_RETRYNUM(15) | AC_CFG_SLTTMHI(0);
+ cfg.cfg_byte14 = AC_CFG_FLGPAD(0) |
+ AC_CFG_BTSTF(0) |
+ AC_CFG_CRC16(0) |
+ AC_CFG_NCRC(0) |
+ AC_CFG_TNCRS(1) |
+ AC_CFG_MANCH(0) |
+ AC_CFG_BCDIS(0) | AC_CFG_PRM(lp->promiscuous);
+ cfg.cfg_byte15 = AC_CFG_ICDS(0) |
+ AC_CFG_CDTF(0) | AC_CFG_ICSS(0) | AC_CFG_CSTF(0);
+/*
+ cfg.cfg_min_frm_len = AC_CFG_MNFRM(64);
+*/
+ cfg.cfg_min_frm_len = AC_CFG_MNFRM(8);
+
+ cfg.cfg_h.ac_command = (AC_CFLD_CMD & acmd_configure);
+ cfg.cfg_h.ac_link = ias_addr;
+ obram_write(ioaddr, cfg_addr, (unsigned char *) &cfg, sizeof(cfg));
+
+ /* Set up the MAC address */
+ memset(&ias, 0x00, sizeof(ias));
+ ias.ias_h.ac_command = (AC_CFLD_CMD & acmd_ia_setup);
+ ias.ias_h.ac_link = mcs_addr;
+ memcpy(&ias.ias_addr[0], (unsigned char *) &dev->dev_addr[0],
+ sizeof(ias.ias_addr));
+ obram_write(ioaddr, ias_addr, (unsigned char *) &ias, sizeof(ias));
+
+ /* Initialize adapter's Ethernet multicast addresses */
+ memset(&mcs, 0x00, sizeof(mcs));
+ mcs.mcs_h.ac_command = AC_CFLD_I | (AC_CFLD_CMD & acmd_mc_setup);
+ mcs.mcs_h.ac_link = nop_addr;
+ mcs.mcs_cnt = WAVELAN_ADDR_SIZE * lp->mc_count;
+ obram_write(ioaddr, mcs_addr, (unsigned char *) &mcs, sizeof(mcs));
+
+ /* Any address to set? */
+ if (lp->mc_count) {
+ for (dmi = dev->mc_list; dmi; dmi = dmi->next)
+ outsw(PIOP1(ioaddr), (u16 *) dmi->dmi_addr,
+ WAVELAN_ADDR_SIZE >> 1);
+
+#ifdef DEBUG_CONFIG_INFO
+ printk(KERN_DEBUG
+ "%s: wv_82586_config(): set %d multicast addresses:\n",
+ dev->name, lp->mc_count);
+ for (dmi = dev->mc_list; dmi; dmi = dmi->next)
+ printk(KERN_DEBUG
+ " %02x:%02x:%02x:%02x:%02x:%02x\n",
+ dmi->dmi_addr[0], dmi->dmi_addr[1],
+ dmi->dmi_addr[2], dmi->dmi_addr[3],
+ dmi->dmi_addr[4], dmi->dmi_addr[5]);
+#endif
+ }
+
+ /*
+ * Overwrite the predecessor NOP link
+ * so that it points to the configure action.
+ */
+ nop_addr = txpred + sizeof(tx);
+ nop.nop_h.ac_status = 0;
+ obram_write(ioaddr, toff(ac_nop_t, nop_addr, nop_h.ac_status),
+ (unsigned char *) &nop.nop_h.ac_status,
+ sizeof(nop.nop_h.ac_status));
+ nop.nop_h.ac_link = cfg_addr;
+ obram_write(ioaddr, toff(ac_nop_t, nop_addr, nop_h.ac_link),
+ (unsigned char *) &nop.nop_h.ac_link,
+ sizeof(nop.nop_h.ac_link));
+
+ /* Job done, clear the flag */
+ lp->reconfig_82586 = 0;
+
+ if (lp->tx_first_in_use == I82586NULL)
+ lp->tx_first_in_use = txblock;
+
+ if (lp->tx_n_in_use == (NTXBLOCKS - 1))
+ netif_stop_queue(dev);
+
+#ifdef DEBUG_CONFIG_TRACE
+ printk(KERN_DEBUG "%s: <-wv_82586_config()\n", dev->name);
+#endif
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * This routine, called by wavelan_close(), gracefully stops the
+ * WaveLAN controller (i82586).
+ * (called by wavelan_close())
+ */
+static inline void wv_82586_stop(struct net_device * dev)
+{
+ net_local *lp = (net_local *) dev->priv;
+ unsigned long ioaddr = dev->base_addr;
+ u16 scb_cmd;
+
+#ifdef DEBUG_CONFIG_TRACE
+ printk(KERN_DEBUG "%s: ->wv_82586_stop()\n", dev->name);
+#endif
+
+ /* Suspend both command unit and receive unit. */
+ scb_cmd =
+ (SCB_CMD_CUC & SCB_CMD_CUC_SUS) | (SCB_CMD_RUC &
+ SCB_CMD_RUC_SUS);
+ obram_write(ioaddr, scboff(OFFSET_SCB, scb_command),
+ (unsigned char *) &scb_cmd, sizeof(scb_cmd));
+ set_chan_attn(ioaddr, lp->hacr);
+
+ /* No more interrupts */
+ wv_ints_off(dev);
+
+#ifdef DEBUG_CONFIG_TRACE
+ printk(KERN_DEBUG "%s: <-wv_82586_stop()\n", dev->name);
+#endif
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Totally reset the WaveLAN and restart it.
+ * Performs the following actions:
+ * 1. A power reset (reset DMA)
+ * 2. Initialize the radio modem (using wv_mmc_init)
+ * 3. Reset & Configure LAN controller (using wv_82586_start)
+ * 4. Start the LAN controller's command unit
+ * 5. Start the LAN controller's receive unit
+ * (called by wavelan_interrupt(), wavelan_watchdog() & wavelan_open())
+ */
+static int wv_hw_reset(struct net_device * dev)
+{
+ net_local *lp = (net_local *) dev->priv;
+ unsigned long ioaddr = dev->base_addr;
+
+#ifdef DEBUG_CONFIG_TRACE
+ printk(KERN_DEBUG "%s: ->wv_hw_reset(dev=0x%x)\n", dev->name,
+ (unsigned int) dev);
+#endif
+
+ /* Increase the number of resets done. */
+ lp->nresets++;
+
+ wv_hacr_reset(ioaddr);
+ lp->hacr = HACR_DEFAULT;
+
+ if ((wv_mmc_init(dev) < 0) || (wv_82586_start(dev) < 0))
+ return -1;
+
+ /* Enable the card to send interrupts. */
+ wv_ints_on(dev);
+
+ /* Start card functions */
+ if (wv_cu_start(dev) < 0)
+ return -1;
+
+ /* Setup the controller and parameters */
+ wv_82586_config(dev);
+
+ /* Finish configuration with the receive unit */
+ if (wv_ru_start(dev) < 0)
+ return -1;
+
+#ifdef DEBUG_CONFIG_TRACE
+ printk(KERN_DEBUG "%s: <-wv_hw_reset()\n", dev->name);
+#endif
+ return 0;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Check if there is a WaveLAN at the specific base address.
+ * As a side effect, this reads the MAC address.
+ * (called in wavelan_probe() and init_module())
+ */
+static int wv_check_ioaddr(unsigned long ioaddr, u8 * mac)
+{
+ int i; /* Loop counter */
+
+ /* Check if the base address if available. */
+ if (!request_region(ioaddr, sizeof(ha_t), "wavelan probe"))
+ return -EBUSY; /* ioaddr already used */
+
+ /* Reset host interface */
+ wv_hacr_reset(ioaddr);
+
+ /* Read the MAC address from the parameter storage area. */
+ psa_read(ioaddr, HACR_DEFAULT, psaoff(0, psa_univ_mac_addr),
+ mac, 6);
+
+ release_region(ioaddr, sizeof(ha_t));
+
+ /*
+ * Check the first three octets of the address for the manufacturer's code.
+ * Note: if this can't find your WaveLAN card, you've got a
+ * non-NCR/AT&T/Lucent ISA card. See wavelan.p.h for detail on
+ * how to configure your card.
+ */
+ for (i = 0; i < (sizeof(MAC_ADDRESSES) / sizeof(char) / 3); i++)
+ if ((mac[0] == MAC_ADDRESSES[i][0]) &&
+ (mac[1] == MAC_ADDRESSES[i][1]) &&
+ (mac[2] == MAC_ADDRESSES[i][2]))
+ return 0;
+
+#ifdef DEBUG_CONFIG_INFO
+ printk(KERN_WARNING
+ "WaveLAN (0x%3X): your MAC address might be %02X:%02X:%02X.\n",
+ ioaddr, mac[0], mac[1], mac[2]);
+#endif
+ return -ENODEV;
+}
+
+/************************ INTERRUPT HANDLING ************************/
+
+/*
+ * This function is the interrupt handler for the WaveLAN card. This
+ * routine will be called whenever:
+ */
+static irqreturn_t wavelan_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct net_device *dev;
+ unsigned long ioaddr;
+ net_local *lp;
+ u16 hasr;
+ u16 status;
+ u16 ack_cmd;
+
+ dev = dev_id;
+
+#ifdef DEBUG_INTERRUPT_TRACE
+ printk(KERN_DEBUG "%s: ->wavelan_interrupt()\n", dev->name);
+#endif
+
+ lp = (net_local *) dev->priv;
+ ioaddr = dev->base_addr;
+
+#ifdef DEBUG_INTERRUPT_INFO
+ /* Check state of our spinlock */
+ if(spin_is_locked(&lp->spinlock))
+ printk(KERN_DEBUG
+ "%s: wavelan_interrupt(): spinlock is already locked !!!\n",
+ dev->name);
+#endif
+
+ /* Prevent reentrancy. We need to do that because we may have
+ * multiple interrupt handler running concurrently.
+ * It is safe because interrupts are disabled before acquiring
+ * the spinlock. */
+ spin_lock(&lp->spinlock);
+
+ /* We always had spurious interrupts at startup, but lately I
+ * saw them comming *between* the request_irq() and the
+ * spin_lock_irqsave() in wavelan_open(), so the spinlock
+ * protection is no enough.
+ * So, we also check lp->hacr that will tell us is we enabled
+ * irqs or not (see wv_ints_on()).
+ * We can't use netif_running(dev) because we depend on the
+ * proper processing of the irq generated during the config. */
+
+ /* Which interrupt it is ? */
+ hasr = hasr_read(ioaddr);
+
+#ifdef DEBUG_INTERRUPT_INFO
+ printk(KERN_INFO
+ "%s: wavelan_interrupt(): hasr 0x%04x; hacr 0x%04x.\n",
+ dev->name, hasr, lp->hacr);
+#endif
+
+ /* Check modem interrupt */
+ if ((hasr & HASR_MMC_INTR) && (lp->hacr & HACR_MMC_INT_ENABLE)) {
+ u8 dce_status;
+
+ /*
+ * Interrupt from the modem management controller.
+ * This will clear it -- ignored for now.
+ */
+ mmc_read(ioaddr, mmroff(0, mmr_dce_status), &dce_status,
+ sizeof(dce_status));
+
+#ifdef DEBUG_INTERRUPT_ERROR
+ printk(KERN_INFO
+ "%s: wavelan_interrupt(): unexpected mmc interrupt: status 0x%04x.\n",
+ dev->name, dce_status);
+#endif
+ }
+
+ /* Check if not controller interrupt */
+ if (((hasr & HASR_82586_INTR) == 0) ||
+ ((lp->hacr & HACR_82586_INT_ENABLE) == 0)) {
+#ifdef DEBUG_INTERRUPT_ERROR
+ printk(KERN_INFO
+ "%s: wavelan_interrupt(): interrupt not coming from i82586 - hasr 0x%04x.\n",
+ dev->name, hasr);
+#endif
+ spin_unlock (&lp->spinlock);
+ return IRQ_NONE;
+ }
+
+ /* Read interrupt data. */
+ obram_read(ioaddr, scboff(OFFSET_SCB, scb_status),
+ (unsigned char *) &status, sizeof(status));
+
+ /*
+ * Acknowledge the interrupt(s).
+ */
+ ack_cmd = status & SCB_ST_INT;
+ obram_write(ioaddr, scboff(OFFSET_SCB, scb_command),
+ (unsigned char *) &ack_cmd, sizeof(ack_cmd));
+ set_chan_attn(ioaddr, lp->hacr);
+
+#ifdef DEBUG_INTERRUPT_INFO
+ printk(KERN_DEBUG "%s: wavelan_interrupt(): status 0x%04x.\n",
+ dev->name, status);
+#endif
+
+ /* Command completed. */
+ if ((status & SCB_ST_CX) == SCB_ST_CX) {
+#ifdef DEBUG_INTERRUPT_INFO
+ printk(KERN_DEBUG
+ "%s: wavelan_interrupt(): command completed.\n",
+ dev->name);
+#endif
+ wv_complete(dev, ioaddr, lp);
+ }
+
+ /* Frame received. */
+ if ((status & SCB_ST_FR) == SCB_ST_FR) {
+#ifdef DEBUG_INTERRUPT_INFO
+ printk(KERN_DEBUG
+ "%s: wavelan_interrupt(): received packet.\n",
+ dev->name);
+#endif
+ wv_receive(dev);
+ }
+
+ /* Check the state of the command unit. */
+ if (((status & SCB_ST_CNA) == SCB_ST_CNA) ||
+ (((status & SCB_ST_CUS) != SCB_ST_CUS_ACTV) &&
+ (netif_running(dev)))) {
+#ifdef DEBUG_INTERRUPT_ERROR
+ printk(KERN_INFO
+ "%s: wavelan_interrupt(): CU inactive -- restarting\n",
+ dev->name);
+#endif
+ wv_hw_reset(dev);
+ }
+
+ /* Check the state of the command unit. */
+ if (((status & SCB_ST_RNR) == SCB_ST_RNR) ||
+ (((status & SCB_ST_RUS) != SCB_ST_RUS_RDY) &&
+ (netif_running(dev)))) {
+#ifdef DEBUG_INTERRUPT_ERROR
+ printk(KERN_INFO
+ "%s: wavelan_interrupt(): RU not ready -- restarting\n",
+ dev->name);
+#endif
+ wv_hw_reset(dev);
+ }
+
+ /* Release spinlock */
+ spin_unlock (&lp->spinlock);
+
+#ifdef DEBUG_INTERRUPT_TRACE
+ printk(KERN_DEBUG "%s: <-wavelan_interrupt()\n", dev->name);
+#endif
+ return IRQ_HANDLED;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Watchdog: when we start a transmission, a timer is set for us in the
+ * kernel. If the transmission completes, this timer is disabled. If
+ * the timer expires, we are called and we try to unlock the hardware.
+ */
+static void wavelan_watchdog(struct net_device * dev)
+{
+ net_local * lp = (net_local *)dev->priv;
+ u_long ioaddr = dev->base_addr;
+ unsigned long flags;
+ unsigned int nreaped;
+
+#ifdef DEBUG_INTERRUPT_TRACE
+ printk(KERN_DEBUG "%s: ->wavelan_watchdog()\n", dev->name);
+#endif
+
+#ifdef DEBUG_INTERRUPT_ERROR
+ printk(KERN_INFO "%s: wavelan_watchdog: watchdog timer expired\n",
+ dev->name);
+#endif
+
+ /* Check that we came here for something */
+ if (lp->tx_n_in_use <= 0) {
+ return;
+ }
+
+ spin_lock_irqsave(&lp->spinlock, flags);
+
+ /* Try to see if some buffers are not free (in case we missed
+ * an interrupt */
+ nreaped = wv_complete(dev, ioaddr, lp);
+
+#ifdef DEBUG_INTERRUPT_INFO
+ printk(KERN_DEBUG
+ "%s: wavelan_watchdog(): %d reaped, %d remain.\n",
+ dev->name, nreaped, lp->tx_n_in_use);
+#endif
+
+#ifdef DEBUG_PSA_SHOW
+ {
+ psa_t psa;
+ psa_read(dev, 0, (unsigned char *) &psa, sizeof(psa));
+ wv_psa_show(&psa);
+ }
+#endif
+#ifdef DEBUG_MMC_SHOW
+ wv_mmc_show(dev);
+#endif
+#ifdef DEBUG_I82586_SHOW
+ wv_cu_show(dev);
+#endif
+
+ /* If no buffer has been freed */
+ if (nreaped == 0) {
+#ifdef DEBUG_INTERRUPT_ERROR
+ printk(KERN_INFO
+ "%s: wavelan_watchdog(): cleanup failed, trying reset\n",
+ dev->name);
+#endif
+ wv_hw_reset(dev);
+ }
+
+ /* At this point, we should have some free Tx buffer ;-) */
+ if (lp->tx_n_in_use < NTXBLOCKS - 1)
+ netif_wake_queue(dev);
+
+ spin_unlock_irqrestore(&lp->spinlock, flags);
+
+#ifdef DEBUG_INTERRUPT_TRACE
+ printk(KERN_DEBUG "%s: <-wavelan_watchdog()\n", dev->name);
+#endif
+}
+
+/********************* CONFIGURATION CALLBACKS *********************/
+/*
+ * Here are the functions called by the Linux networking code (NET3)
+ * for initialization, configuration and deinstallations of the
+ * WaveLAN ISA hardware.
+ */
+
+/*------------------------------------------------------------------*/
+/*
+ * Configure and start up the WaveLAN PCMCIA adaptor.
+ * Called by NET3 when it "opens" the device.
+ */
+static int wavelan_open(struct net_device * dev)
+{
+ net_local * lp = (net_local *)dev->priv;
+ unsigned long flags;
+
+#ifdef DEBUG_CALLBACK_TRACE
+ printk(KERN_DEBUG "%s: ->wavelan_open(dev=0x%x)\n", dev->name,
+ (unsigned int) dev);
+#endif
+
+ /* Check irq */
+ if (dev->irq == 0) {
+#ifdef DEBUG_CONFIG_ERROR
+ printk(KERN_WARNING "%s: wavelan_open(): no IRQ\n",
+ dev->name);
+#endif
+ return -ENXIO;
+ }
+
+ if (request_irq(dev->irq, &wavelan_interrupt, 0, "WaveLAN", dev) != 0)
+ {
+#ifdef DEBUG_CONFIG_ERROR
+ printk(KERN_WARNING "%s: wavelan_open(): invalid IRQ\n",
+ dev->name);
+#endif
+ return -EAGAIN;
+ }
+
+ spin_lock_irqsave(&lp->spinlock, flags);
+
+ if (wv_hw_reset(dev) != -1) {
+ netif_start_queue(dev);
+ } else {
+ free_irq(dev->irq, dev);
+#ifdef DEBUG_CONFIG_ERROR
+ printk(KERN_INFO
+ "%s: wavelan_open(): impossible to start the card\n",
+ dev->name);
+#endif
+ spin_unlock_irqrestore(&lp->spinlock, flags);
+ return -EAGAIN;
+ }
+ spin_unlock_irqrestore(&lp->spinlock, flags);
+
+#ifdef DEBUG_CALLBACK_TRACE
+ printk(KERN_DEBUG "%s: <-wavelan_open()\n", dev->name);
+#endif
+ return 0;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Shut down the WaveLAN ISA card.
+ * Called by NET3 when it "closes" the device.
+ */
+static int wavelan_close(struct net_device * dev)
+{
+ net_local *lp = (net_local *) dev->priv;
+ unsigned long flags;
+
+#ifdef DEBUG_CALLBACK_TRACE
+ printk(KERN_DEBUG "%s: ->wavelan_close(dev=0x%x)\n", dev->name,
+ (unsigned int) dev);
+#endif
+
+ netif_stop_queue(dev);
+
+ /*
+ * Flush the Tx and disable Rx.
+ */
+ spin_lock_irqsave(&lp->spinlock, flags);
+ wv_82586_stop(dev);
+ spin_unlock_irqrestore(&lp->spinlock, flags);
+
+ free_irq(dev->irq, dev);
+
+#ifdef DEBUG_CALLBACK_TRACE
+ printk(KERN_DEBUG "%s: <-wavelan_close()\n", dev->name);
+#endif
+ return 0;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Probe an I/O address, and if the WaveLAN is there configure the
+ * device structure
+ * (called by wavelan_probe() and via init_module()).
+ */
+static int __init wavelan_config(struct net_device *dev, unsigned short ioaddr)
+{
+ u8 irq_mask;
+ int irq;
+ net_local *lp;
+ mac_addr mac;
+ int err;
+
+ if (!request_region(ioaddr, sizeof(ha_t), "wavelan"))
+ return -EADDRINUSE;
+
+ err = wv_check_ioaddr(ioaddr, mac);
+ if (err)
+ goto out;
+
+ memcpy(dev->dev_addr, mac, 6);
+
+ dev->base_addr = ioaddr;
+
+#ifdef DEBUG_CALLBACK_TRACE
+ printk(KERN_DEBUG "%s: ->wavelan_config(dev=0x%x, ioaddr=0x%lx)\n",
+ dev->name, (unsigned int) dev, ioaddr);
+#endif
+
+ /* Check IRQ argument on command line. */
+ if (dev->irq != 0) {
+ irq_mask = wv_irq_to_psa(dev->irq);
+
+ if (irq_mask == 0) {
+#ifdef DEBUG_CONFIG_ERROR
+ printk(KERN_WARNING
+ "%s: wavelan_config(): invalid IRQ %d ignored.\n",
+ dev->name, dev->irq);
+#endif
+ dev->irq = 0;
+ } else {
+#ifdef DEBUG_CONFIG_INFO
+ printk(KERN_DEBUG
+ "%s: wavelan_config(): changing IRQ to %d\n",
+ dev->name, dev->irq);
+#endif
+ psa_write(ioaddr, HACR_DEFAULT,
+ psaoff(0, psa_int_req_no), &irq_mask, 1);
+ /* update the Wavelan checksum */
+ update_psa_checksum(dev, ioaddr, HACR_DEFAULT);
+ wv_hacr_reset(ioaddr);
+ }
+ }
+
+ psa_read(ioaddr, HACR_DEFAULT, psaoff(0, psa_int_req_no),
+ &irq_mask, 1);
+ if ((irq = wv_psa_to_irq(irq_mask)) == -1) {
+#ifdef DEBUG_CONFIG_ERROR
+ printk(KERN_INFO
+ "%s: wavelan_config(): could not wavelan_map_irq(%d).\n",
+ dev->name, irq_mask);
+#endif
+ err = -EAGAIN;
+ goto out;
+ }
+
+ dev->irq = irq;
+
+ dev->mem_start = 0x0000;
+ dev->mem_end = 0x0000;
+ dev->if_port = 0;
+
+ /* Initialize device structures */
+ memset(dev->priv, 0, sizeof(net_local));
+ lp = (net_local *) dev->priv;
+
+ /* Back link to the device structure. */
+ lp->dev = dev;
+ /* Add the device at the beginning of the linked list. */
+ lp->next = wavelan_list;
+ wavelan_list = lp;
+
+ lp->hacr = HACR_DEFAULT;
+
+ /* Multicast stuff */
+ lp->promiscuous = 0;
+ lp->mc_count = 0;
+
+ /* Init spinlock */
+ spin_lock_init(&lp->spinlock);
+
+ SET_MODULE_OWNER(dev);
+ dev->open = wavelan_open;
+ dev->stop = wavelan_close;
+ dev->hard_start_xmit = wavelan_packet_xmit;
+ dev->get_stats = wavelan_get_stats;
+ dev->set_multicast_list = &wavelan_set_multicast_list;
+ dev->tx_timeout = &wavelan_watchdog;
+ dev->watchdog_timeo = WATCHDOG_JIFFIES;
+#ifdef SET_MAC_ADDRESS
+ dev->set_mac_address = &wavelan_set_mac_address;
+#endif /* SET_MAC_ADDRESS */
+
+#ifdef WIRELESS_EXT /* if wireless extension exists in the kernel */
+ dev->wireless_handlers = &wavelan_handler_def;
+ lp->wireless_data.spy_data = &lp->spy_data;
+ dev->wireless_data = &lp->wireless_data;
+#endif
+
+ dev->mtu = WAVELAN_MTU;
+
+ /* Display nice information. */
+ wv_init_info(dev);
+
+#ifdef DEBUG_CALLBACK_TRACE
+ printk(KERN_DEBUG "%s: <-wavelan_config()\n", dev->name);
+#endif
+ return 0;
+out:
+ release_region(ioaddr, sizeof(ha_t));
+ return err;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Check for a network adaptor of this type. Return '0' iff one
+ * exists. There seem to be different interpretations of
+ * the initial value of dev->base_addr.
+ * We follow the example in drivers/net/ne.c.
+ * (called in "Space.c")
+ */
+struct net_device * __init wavelan_probe(int unit)
+{
+ struct net_device *dev;
+ short base_addr;
+ int def_irq;
+ int i;
+ int r = 0;
+
+#ifdef STRUCT_CHECK
+ if (wv_struct_check() != (char *) NULL) {
+ printk(KERN_WARNING
+ "%s: wavelan_probe(): structure/compiler botch: \"%s\"\n",
+ dev->name, wv_struct_check());
+ return -ENODEV;
+ }
+#endif /* STRUCT_CHECK */
+
+ dev = alloc_etherdev(sizeof(net_local));
+ if (!dev)
+ return ERR_PTR(-ENOMEM);
+
+ sprintf(dev->name, "eth%d", unit);
+ netdev_boot_setup_check(dev);
+ base_addr = dev->base_addr;
+ def_irq = dev->irq;
+
+#ifdef DEBUG_CALLBACK_TRACE
+ printk(KERN_DEBUG
+ "%s: ->wavelan_probe(dev=%p (base_addr=0x%x))\n",
+ dev->name, dev, (unsigned int) dev->base_addr);
+#endif
+
+ /* Don't probe at all. */
+ if (base_addr < 0) {
+#ifdef DEBUG_CONFIG_ERROR
+ printk(KERN_WARNING
+ "%s: wavelan_probe(): invalid base address\n",
+ dev->name);
+#endif
+ r = -ENXIO;
+ } else if (base_addr > 0x100) { /* Check a single specified location. */
+ r = wavelan_config(dev, base_addr);
+#ifdef DEBUG_CONFIG_INFO
+ if (r != 0)
+ printk(KERN_DEBUG
+ "%s: wavelan_probe(): no device at specified base address (0x%X) or address already in use\n",
+ dev->name, base_addr);
+#endif
+
+#ifdef DEBUG_CALLBACK_TRACE
+ printk(KERN_DEBUG "%s: <-wavelan_probe()\n", dev->name);
+#endif
+ } else { /* Scan all possible addresses of the WaveLAN hardware. */
+ for (i = 0; i < NELS(iobase); i++) {
+ dev->irq = def_irq;
+ if (wavelan_config(dev, iobase[i]) == 0) {
+#ifdef DEBUG_CALLBACK_TRACE
+ printk(KERN_DEBUG
+ "%s: <-wavelan_probe()\n",
+ dev->name);
+#endif
+ break;
+ }
+ }
+ if (i == NELS(iobase))
+ r = -ENODEV;
+ }
+ if (r)
+ goto out;
+ r = register_netdev(dev);
+ if (r)
+ goto out1;
+ return dev;
+out1:
+ release_region(dev->base_addr, sizeof(ha_t));
+ wavelan_list = wavelan_list->next;
+out:
+ free_netdev(dev);
+ return ERR_PTR(r);
+}
+
+/****************************** MODULE ******************************/
+/*
+ * Module entry point: insertion and removal
+ */
+
+#ifdef MODULE
+/*------------------------------------------------------------------*/
+/*
+ * Insertion of the module
+ * I'm now quite proud of the multi-device support.
+ */
+int init_module(void)
+{
+ int ret = -EIO; /* Return error if no cards found */
+ int i;
+
+#ifdef DEBUG_MODULE_TRACE
+ printk(KERN_DEBUG "-> init_module()\n");
+#endif
+
+ /* If probing is asked */
+ if (io[0] == 0) {
+#ifdef DEBUG_CONFIG_ERROR
+ printk(KERN_WARNING
+ "WaveLAN init_module(): doing device probing (bad !)\n");
+ printk(KERN_WARNING
+ "Specify base addresses while loading module to correct the problem\n");
+#endif
+
+ /* Copy the basic set of address to be probed. */
+ for (i = 0; i < NELS(iobase); i++)
+ io[i] = iobase[i];
+ }
+
+
+ /* Loop on all possible base addresses. */
+ i = -1;
+ while ((io[++i] != 0) && (i < NELS(io))) {
+ struct net_device *dev = alloc_etherdev(sizeof(net_local));
+ if (!dev)
+ break;
+ if (name[i])
+ strcpy(dev->name, name[i]); /* Copy name */
+ dev->base_addr = io[i];
+ dev->irq = irq[i];
+
+ /* Check if there is something at this base address. */
+ if (wavelan_config(dev, io[i]) == 0) {
+ if (register_netdev(dev) != 0) {
+ release_region(dev->base_addr, sizeof(ha_t));
+ wavelan_list = wavelan_list->next;
+ } else {
+ ret = 0;
+ continue;
+ }
+ }
+ free_netdev(dev);
+ }
+
+#ifdef DEBUG_CONFIG_ERROR
+ if (!wavelan_list)
+ printk(KERN_WARNING
+ "WaveLAN init_module(): no device found\n");
+#endif
+
+#ifdef DEBUG_MODULE_TRACE
+ printk(KERN_DEBUG "<- init_module()\n");
+#endif
+ return ret;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Removal of the module
+ */
+void cleanup_module(void)
+{
+#ifdef DEBUG_MODULE_TRACE
+ printk(KERN_DEBUG "-> cleanup_module()\n");
+#endif
+
+ /* Loop on all devices and release them. */
+ while (wavelan_list) {
+ struct net_device *dev = wavelan_list->dev;
+
+#ifdef DEBUG_CONFIG_INFO
+ printk(KERN_DEBUG
+ "%s: cleanup_module(): removing device at 0x%x\n",
+ dev->name, (unsigned int) dev);
+#endif
+ unregister_netdev(dev);
+
+ release_region(dev->base_addr, sizeof(ha_t));
+ wavelan_list = wavelan_list->next;
+
+ free_netdev(dev);
+ }
+
+#ifdef DEBUG_MODULE_TRACE
+ printk(KERN_DEBUG "<- cleanup_module()\n");
+#endif
+}
+#endif /* MODULE */
+MODULE_LICENSE("GPL");
+
+/*
+ * This software may only be used and distributed
+ * according to the terms of the GNU General Public License.
+ *
+ * This software was developed as a component of the
+ * Linux operating system.
+ * It is based on other device drivers and information
+ * either written or supplied by:
+ * Ajay Bakre (bakre@paul.rutgers.edu),
+ * Donald Becker (becker@scyld.com),
+ * Loeke Brederveld (Loeke.Brederveld@Utrecht.NCR.com),
+ * Anders Klemets (klemets@it.kth.se),
+ * Vladimir V. Kolpakov (w@stier.koenig.ru),
+ * Marc Meertens (Marc.Meertens@Utrecht.NCR.com),
+ * Pauline Middelink (middelin@polyware.iaf.nl),
+ * Robert Morris (rtm@das.harvard.edu),
+ * Jean Tourrilhes (jt@hplb.hpl.hp.com),
+ * Girish Welling (welling@paul.rutgers.edu),
+ *
+ * Thanks go also to:
+ * James Ashton (jaa101@syseng.anu.edu.au),
+ * Alan Cox (alan@redhat.com),
+ * Allan Creighton (allanc@cs.usyd.edu.au),
+ * Matthew Geier (matthew@cs.usyd.edu.au),
+ * Remo di Giovanni (remo@cs.usyd.edu.au),
+ * Eckhard Grah (grah@wrcs1.urz.uni-wuppertal.de),
+ * Vipul Gupta (vgupta@cs.binghamton.edu),
+ * Mark Hagan (mhagan@wtcpost.daytonoh.NCR.COM),
+ * Tim Nicholson (tim@cs.usyd.edu.au),
+ * Ian Parkin (ian@cs.usyd.edu.au),
+ * John Rosenberg (johnr@cs.usyd.edu.au),
+ * George Rossi (george@phm.gov.au),
+ * Arthur Scott (arthur@cs.usyd.edu.au),
+ * Peter Storey,
+ * for their assistance and advice.
+ *
+ * Please send bug reports, updates, comments to:
+ *
+ * Bruce Janson Email: bruce@cs.usyd.edu.au
+ * Basser Department of Computer Science Phone: +61-2-9351-3423
+ * University of Sydney, N.S.W., 2006, AUSTRALIA Fax: +61-2-9351-3838
+ */
diff --git a/drivers/net/wireless/wavelan.h b/drivers/net/wireless/wavelan.h
new file mode 100644
index 0000000..27172cd
--- /dev/null
+++ b/drivers/net/wireless/wavelan.h
@@ -0,0 +1,370 @@
+/*
+ * WaveLAN ISA driver
+ *
+ * Jean II - HPLB '96
+ *
+ * Reorganisation and extension of the driver.
+ * Original copyright follows. See wavelan.p.h for details.
+ *
+ * This file contains the declarations for the WaveLAN hardware. Note that
+ * the WaveLAN ISA includes a i82586 controller (see definitions in
+ * file i82586.h).
+ *
+ * The main difference between the ISA hardware and the PCMCIA one is
+ * the Ethernet controller (i82586 instead of i82593).
+ * The i82586 allows multiple transmit buffers. The PSA needs to be accessed
+ * through the host interface.
+ */
+
+#ifndef _WAVELAN_H
+#define _WAVELAN_H
+
+/************************** MAGIC NUMBERS ***************************/
+
+/* Detection of the WaveLAN card is done by reading the MAC
+ * address from the card and checking it. If you have a non-AT&T
+ * product (OEM, like DEC RoamAbout, Digital Ocean, or Epson),
+ * you might need to modify this part to accommodate your hardware.
+ */
+static const char MAC_ADDRESSES[][3] =
+{
+ { 0x08, 0x00, 0x0E }, /* AT&T WaveLAN (standard) & DEC RoamAbout */
+ { 0x08, 0x00, 0x6A }, /* AT&T WaveLAN (alternate) */
+ { 0x00, 0x00, 0xE1 }, /* Hitachi Wavelan */
+ { 0x00, 0x60, 0x1D } /* Lucent Wavelan (another one) */
+ /* Add your card here and send me the patch! */
+};
+
+#define WAVELAN_ADDR_SIZE 6 /* Size of a MAC address */
+
+#define WAVELAN_MTU 1500 /* Maximum size of WaveLAN packet */
+
+#define MAXDATAZ (WAVELAN_ADDR_SIZE + WAVELAN_ADDR_SIZE + 2 + WAVELAN_MTU)
+
+/*
+ * Constants used to convert channels to frequencies
+ */
+
+/* Frequency available in the 2.0 modem, in units of 250 kHz
+ * (as read in the offset register of the dac area).
+ * Used to map channel numbers used by `wfreqsel' to frequencies
+ */
+static const short channel_bands[] = { 0x30, 0x58, 0x64, 0x7A, 0x80, 0xA8,
+ 0xD0, 0xF0, 0xF8, 0x150 };
+
+/* Frequencies of the 1.0 modem (fixed frequencies).
+ * Use to map the PSA `subband' to a frequency
+ * Note : all frequencies apart from the first one need to be multiplied by 10
+ */
+static const int fixed_bands[] = { 915e6, 2.425e8, 2.46e8, 2.484e8, 2.4305e8 };
+
+
+
+/*************************** PC INTERFACE ****************************/
+
+/*
+ * Host Adaptor structure.
+ * (base is board port address).
+ */
+typedef union hacs_u hacs_u;
+union hacs_u
+{
+ unsigned short hu_command; /* Command register */
+#define HACR_RESET 0x0001 /* Reset board */
+#define HACR_CA 0x0002 /* Set Channel Attention for 82586 */
+#define HACR_16BITS 0x0004 /* 16-bit operation (0 => 8bits) */
+#define HACR_OUT0 0x0008 /* General purpose output pin 0 */
+ /* not used - must be 1 */
+#define HACR_OUT1 0x0010 /* General purpose output pin 1 */
+ /* not used - must be 1 */
+#define HACR_82586_INT_ENABLE 0x0020 /* Enable 82586 interrupts */
+#define HACR_MMC_INT_ENABLE 0x0040 /* Enable MMC interrupts */
+#define HACR_INTR_CLR_ENABLE 0x0080 /* Enable interrupt status read/clear */
+ unsigned short hu_status; /* Status Register */
+#define HASR_82586_INTR 0x0001 /* Interrupt request from 82586 */
+#define HASR_MMC_INTR 0x0002 /* Interrupt request from MMC */
+#define HASR_MMC_BUSY 0x0004 /* MMC busy indication */
+#define HASR_PSA_BUSY 0x0008 /* LAN parameter storage area busy */
+};
+
+typedef struct ha_t ha_t;
+struct ha_t
+{
+ hacs_u ha_cs; /* Command and status registers */
+#define ha_command ha_cs.hu_command
+#define ha_status ha_cs.hu_status
+ unsigned short ha_mmcr; /* Modem Management Ctrl Register */
+ unsigned short ha_pior0; /* Program I/O Address Register Port 0 */
+ unsigned short ha_piop0; /* Program I/O Port 0 */
+ unsigned short ha_pior1; /* Program I/O Address Register Port 1 */
+ unsigned short ha_piop1; /* Program I/O Port 1 */
+ unsigned short ha_pior2; /* Program I/O Address Register Port 2 */
+ unsigned short ha_piop2; /* Program I/O Port 2 */
+};
+
+#define HA_SIZE 16
+
+#define hoff(p,f) (unsigned short)((void *)(&((ha_t *)((void *)0 + (p)))->f) - (void *)0)
+#define HACR(p) hoff(p, ha_command)
+#define HASR(p) hoff(p, ha_status)
+#define MMCR(p) hoff(p, ha_mmcr)
+#define PIOR0(p) hoff(p, ha_pior0)
+#define PIOP0(p) hoff(p, ha_piop0)
+#define PIOR1(p) hoff(p, ha_pior1)
+#define PIOP1(p) hoff(p, ha_piop1)
+#define PIOR2(p) hoff(p, ha_pior2)
+#define PIOP2(p) hoff(p, ha_piop2)
+
+/*
+ * Program I/O Mode Register values.
+ */
+#define STATIC_PIO 0 /* Mode 1: static mode */
+ /* RAM access ??? */
+#define AUTOINCR_PIO 1 /* Mode 2: auto increment mode */
+ /* RAM access ??? */
+#define AUTODECR_PIO 2 /* Mode 3: auto decrement mode */
+ /* RAM access ??? */
+#define PARAM_ACCESS_PIO 3 /* Mode 4: LAN parameter access mode */
+ /* Parameter access. */
+#define PIO_MASK 3 /* register mask */
+#define PIOM(cmd,piono) ((u_short)cmd << 10 << (piono * 2))
+
+#define HACR_DEFAULT (HACR_OUT0 | HACR_OUT1 | HACR_16BITS | PIOM(STATIC_PIO, 0) | PIOM(AUTOINCR_PIO, 1) | PIOM(PARAM_ACCESS_PIO, 2))
+#define HACR_INTRON (HACR_82586_INT_ENABLE | HACR_MMC_INT_ENABLE | HACR_INTR_CLR_ENABLE)
+
+/************************** MEMORY LAYOUT **************************/
+
+/*
+ * Onboard 64 k RAM layout.
+ * (Offsets from 0x0000.)
+ */
+#define OFFSET_RU 0x0000 /* 75% memory */
+#define OFFSET_CU 0xC000 /* 25% memory */
+#define OFFSET_SCB (OFFSET_ISCP - sizeof(scb_t))
+#define OFFSET_ISCP (OFFSET_SCP - sizeof(iscp_t))
+#define OFFSET_SCP I82586_SCP_ADDR
+
+#define RXBLOCKZ (sizeof(fd_t) + sizeof(rbd_t) + MAXDATAZ)
+#define TXBLOCKZ (sizeof(ac_tx_t) + sizeof(ac_nop_t) + sizeof(tbd_t) + MAXDATAZ)
+
+#define NRXBLOCKS ((OFFSET_CU - OFFSET_RU) / RXBLOCKZ)
+#define NTXBLOCKS ((OFFSET_SCB - OFFSET_CU) / TXBLOCKZ)
+
+/********************** PARAMETER STORAGE AREA **********************/
+
+/*
+ * Parameter Storage Area (PSA).
+ */
+typedef struct psa_t psa_t;
+struct psa_t
+{
+ unsigned char psa_io_base_addr_1; /* [0x00] Base address 1 ??? */
+ unsigned char psa_io_base_addr_2; /* [0x01] Base address 2 */
+ unsigned char psa_io_base_addr_3; /* [0x02] Base address 3 */
+ unsigned char psa_io_base_addr_4; /* [0x03] Base address 4 */
+ unsigned char psa_rem_boot_addr_1; /* [0x04] Remote Boot Address 1 */
+ unsigned char psa_rem_boot_addr_2; /* [0x05] Remote Boot Address 2 */
+ unsigned char psa_rem_boot_addr_3; /* [0x06] Remote Boot Address 3 */
+ unsigned char psa_holi_params; /* [0x07] HOst Lan Interface (HOLI) Parameters */
+ unsigned char psa_int_req_no; /* [0x08] Interrupt Request Line */
+ unsigned char psa_unused0[7]; /* [0x09-0x0F] unused */
+
+ unsigned char psa_univ_mac_addr[WAVELAN_ADDR_SIZE]; /* [0x10-0x15] Universal (factory) MAC Address */
+ unsigned char psa_local_mac_addr[WAVELAN_ADDR_SIZE]; /* [0x16-1B] Local MAC Address */
+ unsigned char psa_univ_local_sel; /* [0x1C] Universal Local Selection */
+#define PSA_UNIVERSAL 0 /* Universal (factory) */
+#define PSA_LOCAL 1 /* Local */
+ unsigned char psa_comp_number; /* [0x1D] Compatibility Number: */
+#define PSA_COMP_PC_AT_915 0 /* PC-AT 915 MHz */
+#define PSA_COMP_PC_MC_915 1 /* PC-MC 915 MHz */
+#define PSA_COMP_PC_AT_2400 2 /* PC-AT 2.4 GHz */
+#define PSA_COMP_PC_MC_2400 3 /* PC-MC 2.4 GHz */
+#define PSA_COMP_PCMCIA_915 4 /* PCMCIA 915 MHz or 2.0 */
+ unsigned char psa_thr_pre_set; /* [0x1E] Modem Threshold Preset */
+ unsigned char psa_feature_select; /* [0x1F] Call code required (1=on) */
+#define PSA_FEATURE_CALL_CODE 0x01 /* Call code required (Japan) */
+ unsigned char psa_subband; /* [0x20] Subband */
+#define PSA_SUBBAND_915 0 /* 915 MHz or 2.0 */
+#define PSA_SUBBAND_2425 1 /* 2425 MHz */
+#define PSA_SUBBAND_2460 2 /* 2460 MHz */
+#define PSA_SUBBAND_2484 3 /* 2484 MHz */
+#define PSA_SUBBAND_2430_5 4 /* 2430.5 MHz */
+ unsigned char psa_quality_thr; /* [0x21] Modem Quality Threshold */
+ unsigned char psa_mod_delay; /* [0x22] Modem Delay (?) (reserved) */
+ unsigned char psa_nwid[2]; /* [0x23-0x24] Network ID */
+ unsigned char psa_nwid_select; /* [0x25] Network ID Select On/Off */
+ unsigned char psa_encryption_select; /* [0x26] Encryption On/Off */
+ unsigned char psa_encryption_key[8]; /* [0x27-0x2E] Encryption Key */
+ unsigned char psa_databus_width; /* [0x2F] AT bus width select 8/16 */
+ unsigned char psa_call_code[8]; /* [0x30-0x37] (Japan) Call Code */
+ unsigned char psa_nwid_prefix[2]; /* [0x38-0x39] Roaming domain */
+ unsigned char psa_reserved[2]; /* [0x3A-0x3B] Reserved - fixed 00 */
+ unsigned char psa_conf_status; /* [0x3C] Conf Status, bit 0=1:config*/
+ unsigned char psa_crc[2]; /* [0x3D] CRC-16 over PSA */
+ unsigned char psa_crc_status; /* [0x3F] CRC Valid Flag */
+};
+
+#define PSA_SIZE 64
+
+/* Calculate offset of a field in the above structure.
+ * Warning: only even addresses are used. */
+#define psaoff(p,f) ((unsigned short) ((void *)(&((psa_t *) ((void *) NULL + (p)))->f) - (void *) NULL))
+
+/******************** MODEM MANAGEMENT INTERFACE ********************/
+
+/*
+ * Modem Management Controller (MMC) write structure.
+ */
+typedef struct mmw_t mmw_t;
+struct mmw_t
+{
+ unsigned char mmw_encr_key[8]; /* encryption key */
+ unsigned char mmw_encr_enable; /* Enable or disable encryption. */
+#define MMW_ENCR_ENABLE_MODE 0x02 /* mode of security option */
+#define MMW_ENCR_ENABLE_EN 0x01 /* Enable security option. */
+ unsigned char mmw_unused0[1]; /* unused */
+ unsigned char mmw_des_io_invert; /* encryption option */
+#define MMW_DES_IO_INVERT_RES 0x0F /* reserved */
+#define MMW_DES_IO_INVERT_CTRL 0xF0 /* control (?) (set to 0) */
+ unsigned char mmw_unused1[5]; /* unused */
+ unsigned char mmw_loopt_sel; /* looptest selection */
+#define MMW_LOOPT_SEL_DIS_NWID 0x40 /* Disable NWID filtering. */
+#define MMW_LOOPT_SEL_INT 0x20 /* Activate Attention Request. */
+#define MMW_LOOPT_SEL_LS 0x10 /* looptest, no collision avoidance */
+#define MMW_LOOPT_SEL_LT3A 0x08 /* looptest 3a */
+#define MMW_LOOPT_SEL_LT3B 0x04 /* looptest 3b */
+#define MMW_LOOPT_SEL_LT3C 0x02 /* looptest 3c */
+#define MMW_LOOPT_SEL_LT3D 0x01 /* looptest 3d */
+ unsigned char mmw_jabber_enable; /* jabber timer enable */
+ /* Abort transmissions > 200 ms */
+ unsigned char mmw_freeze; /* freeze or unfreeze signal level */
+ /* 0 : signal level & qual updated for every new message, 1 : frozen */
+ unsigned char mmw_anten_sel; /* antenna selection */
+#define MMW_ANTEN_SEL_SEL 0x01 /* direct antenna selection */
+#define MMW_ANTEN_SEL_ALG_EN 0x02 /* antenna selection algo. enable */
+ unsigned char mmw_ifs; /* inter frame spacing */
+ /* min time between transmission in bit periods (.5 us) - bit 0 ignored */
+ unsigned char mmw_mod_delay; /* modem delay (synchro) */
+ unsigned char mmw_jam_time; /* jamming time (after collision) */
+ unsigned char mmw_unused2[1]; /* unused */
+ unsigned char mmw_thr_pre_set; /* level threshold preset */
+ /* Discard all packet with signal < this value (4) */
+ unsigned char mmw_decay_prm; /* decay parameters */
+ unsigned char mmw_decay_updat_prm; /* decay update parameters */
+ unsigned char mmw_quality_thr; /* quality (z-quotient) threshold */
+ /* Discard all packet with quality < this value (3) */
+ unsigned char mmw_netw_id_l; /* NWID low order byte */
+ unsigned char mmw_netw_id_h; /* NWID high order byte */
+ /* Network ID or Domain : create virtual net on the air */
+
+ /* 2.0 Hardware extension - frequency selection support */
+ unsigned char mmw_mode_select; /* for analog tests (set to 0) */
+ unsigned char mmw_unused3[1]; /* unused */
+ unsigned char mmw_fee_ctrl; /* frequency EEPROM control */
+#define MMW_FEE_CTRL_PRE 0x10 /* Enable protected instructions. */
+#define MMW_FEE_CTRL_DWLD 0x08 /* Download EEPROM to mmc. */
+#define MMW_FEE_CTRL_CMD 0x07 /* EEPROM commands: */
+#define MMW_FEE_CTRL_READ 0x06 /* Read */
+#define MMW_FEE_CTRL_WREN 0x04 /* Write enable */
+#define MMW_FEE_CTRL_WRITE 0x05 /* Write data to address. */
+#define MMW_FEE_CTRL_WRALL 0x04 /* Write data to all addresses. */
+#define MMW_FEE_CTRL_WDS 0x04 /* Write disable */
+#define MMW_FEE_CTRL_PRREAD 0x16 /* Read addr from protect register */
+#define MMW_FEE_CTRL_PREN 0x14 /* Protect register enable */
+#define MMW_FEE_CTRL_PRCLEAR 0x17 /* Unprotect all registers. */
+#define MMW_FEE_CTRL_PRWRITE 0x15 /* Write address in protect register */
+#define MMW_FEE_CTRL_PRDS 0x14 /* Protect register disable */
+ /* Never issue the PRDS command: it's irreversible! */
+
+ unsigned char mmw_fee_addr; /* EEPROM address */
+#define MMW_FEE_ADDR_CHANNEL 0xF0 /* Select the channel. */
+#define MMW_FEE_ADDR_OFFSET 0x0F /* Offset in channel data */
+#define MMW_FEE_ADDR_EN 0xC0 /* FEE_CTRL enable operations */
+#define MMW_FEE_ADDR_DS 0x00 /* FEE_CTRL disable operations */
+#define MMW_FEE_ADDR_ALL 0x40 /* FEE_CTRL all operations */
+#define MMW_FEE_ADDR_CLEAR 0xFF /* FEE_CTRL clear operations */
+
+ unsigned char mmw_fee_data_l; /* Write data to EEPROM. */
+ unsigned char mmw_fee_data_h; /* high octet */
+ unsigned char mmw_ext_ant; /* Setting for external antenna */
+#define MMW_EXT_ANT_EXTANT 0x01 /* Select external antenna */
+#define MMW_EXT_ANT_POL 0x02 /* Polarity of the antenna */
+#define MMW_EXT_ANT_INTERNAL 0x00 /* Internal antenna */
+#define MMW_EXT_ANT_EXTERNAL 0x03 /* External antenna */
+#define MMW_EXT_ANT_IQ_TEST 0x1C /* IQ test pattern (set to 0) */
+};
+
+#define MMW_SIZE 37
+
+#define mmwoff(p,f) (unsigned short)((void *)(&((mmw_t *)((void *)0 + (p)))->f) - (void *)0)
+
+/*
+ * Modem Management Controller (MMC) read structure.
+ */
+typedef struct mmr_t mmr_t;
+struct mmr_t
+{
+ unsigned char mmr_unused0[8]; /* unused */
+ unsigned char mmr_des_status; /* encryption status */
+ unsigned char mmr_des_avail; /* encryption available (0x55 read) */
+#define MMR_DES_AVAIL_DES 0x55 /* DES available */
+#define MMR_DES_AVAIL_AES 0x33 /* AES (AT&T) available */
+ unsigned char mmr_des_io_invert; /* des I/O invert register */
+ unsigned char mmr_unused1[5]; /* unused */
+ unsigned char mmr_dce_status; /* DCE status */
+#define MMR_DCE_STATUS_RX_BUSY 0x01 /* receiver busy */
+#define MMR_DCE_STATUS_LOOPT_IND 0x02 /* loop test indicated */
+#define MMR_DCE_STATUS_TX_BUSY 0x04 /* transmitter on */
+#define MMR_DCE_STATUS_JBR_EXPIRED 0x08 /* jabber timer expired */
+#define MMR_DCE_STATUS 0x0F /* mask to get the bits */
+ unsigned char mmr_dsp_id; /* DSP ID (AA = Daedalus rev A) */
+ unsigned char mmr_unused2[2]; /* unused */
+ unsigned char mmr_correct_nwid_l; /* # of correct NWIDs rxd (low) */
+ unsigned char mmr_correct_nwid_h; /* # of correct NWIDs rxd (high) */
+ /* Warning: read high-order octet first! */
+ unsigned char mmr_wrong_nwid_l; /* # of wrong NWIDs rxd (low) */
+ unsigned char mmr_wrong_nwid_h; /* # of wrong NWIDs rxd (high) */
+ unsigned char mmr_thr_pre_set; /* level threshold preset */
+#define MMR_THR_PRE_SET 0x3F /* level threshold preset */
+#define MMR_THR_PRE_SET_CUR 0x80 /* Current signal above it */
+ unsigned char mmr_signal_lvl; /* signal level */
+#define MMR_SIGNAL_LVL 0x3F /* signal level */
+#define MMR_SIGNAL_LVL_VALID 0x80 /* Updated since last read */
+ unsigned char mmr_silence_lvl; /* silence level (noise) */
+#define MMR_SILENCE_LVL 0x3F /* silence level */
+#define MMR_SILENCE_LVL_VALID 0x80 /* Updated since last read */
+ unsigned char mmr_sgnl_qual; /* signal quality */
+#define MMR_SGNL_QUAL 0x0F /* signal quality */
+#define MMR_SGNL_QUAL_ANT 0x80 /* current antenna used */
+ unsigned char mmr_netw_id_l; /* NWID low order byte (?) */
+ unsigned char mmr_unused3[3]; /* unused */
+
+ /* 2.0 Hardware extension - frequency selection support */
+ unsigned char mmr_fee_status; /* Status of frequency EEPROM */
+#define MMR_FEE_STATUS_ID 0xF0 /* Modem revision ID */
+#define MMR_FEE_STATUS_DWLD 0x08 /* Download in progress */
+#define MMR_FEE_STATUS_BUSY 0x04 /* EEPROM busy */
+ unsigned char mmr_unused4[1]; /* unused */
+ unsigned char mmr_fee_data_l; /* Read data from EEPROM (low) */
+ unsigned char mmr_fee_data_h; /* Read data from EEPROM (high) */
+};
+
+#define MMR_SIZE 36
+
+#define mmroff(p,f) (unsigned short)((void *)(&((mmr_t *)((void *)0 + (p)))->f) - (void *)0)
+
+/* Make the two above structures one */
+typedef union mm_t
+{
+ struct mmw_t w; /* Write to the mmc */
+ struct mmr_t r; /* Read from the mmc */
+} mm_t;
+
+#endif /* _WAVELAN_H */
+
+/*
+ * This software may only be used and distributed
+ * according to the terms of the GNU General Public License.
+ *
+ * For more details, see wavelan.c.
+ */
diff --git a/drivers/net/wireless/wavelan.p.h b/drivers/net/wireless/wavelan.p.h
new file mode 100644
index 0000000..509ff22
--- /dev/null
+++ b/drivers/net/wireless/wavelan.p.h
@@ -0,0 +1,716 @@
+/*
+ * WaveLAN ISA driver
+ *
+ * Jean II - HPLB '96
+ *
+ * Reorganisation and extension of the driver.
+ *
+ * This file contains all definitions and declarations necessary for the
+ * WaveLAN ISA driver. This file is a private header, so it should
+ * be included only in wavelan.c!
+ */
+
+#ifndef WAVELAN_P_H
+#define WAVELAN_P_H
+
+/************************** DOCUMENTATION ***************************/
+/*
+ * This driver provides a Linux interface to the WaveLAN ISA hardware.
+ * The WaveLAN is a product of Lucent (http://www.wavelan.com/).
+ * This division was formerly part of NCR and then AT&T.
+ * WaveLANs are also distributed by DEC (RoamAbout DS) and Digital Ocean.
+ *
+ * To learn how to use this driver, read the NET3 HOWTO.
+ * If you want to exploit the many other functionalities, read the comments
+ * in the code.
+ *
+ * This driver is the result of the effort of many people (see below).
+ */
+
+/* ------------------------ SPECIFIC NOTES ------------------------ */
+/*
+ * Web page
+ * --------
+ * I try to maintain a web page with the Wireless LAN Howto at :
+ * http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Wavelan.html
+ *
+ * SMP
+ * ---
+ * We now are SMP compliant (I eventually fixed the remaining bugs).
+ * The driver has been tested on a dual P6-150 and survived my usual
+ * set of torture tests.
+ * Anyway, I spent enough time chasing interrupt re-entrancy during
+ * errors or reconfigure, and I designed the locked/unlocked sections
+ * of the driver with great care, and with the recent addition of
+ * the spinlock (thanks to the new API), we should be quite close to
+ * the truth.
+ * The SMP/IRQ locking is quite coarse and conservative (i.e. not fast),
+ * but better safe than sorry (especially at 2 Mb/s ;-).
+ *
+ * I have also looked into disabling only our interrupt on the card
+ * (via HACR) instead of all interrupts in the processor (via cli),
+ * so that other driver are not impacted, and it look like it's
+ * possible, but it's very tricky to do right (full of races). As
+ * the gain would be mostly for SMP systems, it can wait...
+ *
+ * Debugging and options
+ * ---------------------
+ * You will find below a set of '#define" allowing a very fine control
+ * on the driver behaviour and the debug messages printed.
+ * The main options are :
+ * o SET_PSA_CRC, to have your card correctly recognised by
+ * an access point and the Point-to-Point diagnostic tool.
+ * o USE_PSA_CONFIG, to read configuration from the PSA (EEprom)
+ * (otherwise we always start afresh with some defaults)
+ *
+ * wavelan.o is too darned big
+ * ---------------------------
+ * That's true! There is a very simple way to reduce the driver
+ * object by 33%! Comment out the following line:
+ * #include <linux/wireless.h>
+ * Other compile options can also reduce the size of it...
+ *
+ * MAC address and hardware detection:
+ * -----------------------------------
+ * The detection code for the WaveLAN checks that the first three
+ * octets of the MAC address fit the company code. This type of
+ * detection works well for AT&T cards (because the AT&T code is
+ * hardcoded in wavelan.h), but of course will fail for other
+ * manufacturers.
+ *
+ * If you are sure that your card is derived from the WaveLAN,
+ * here is the way to configure it:
+ * 1) Get your MAC address
+ * a) With your card utilities (wfreqsel, instconf, etc.)
+ * b) With the driver:
+ * o compile the kernel with DEBUG_CONFIG_INFO enabled
+ * o Boot and look the card messages
+ * 2) Set your MAC code (3 octets) in MAC_ADDRESSES[][3] (wavelan.h)
+ * 3) Compile and verify
+ * 4) Send me the MAC code. I will include it in the next version.
+ *
+ */
+
+/* --------------------- WIRELESS EXTENSIONS --------------------- */
+/*
+ * This driver is the first to support "wireless extensions".
+ * This set of extensions provides a standard way to control the wireless
+ * characteristics of the hardware. Applications such as mobile IP may
+ * take advantage of it.
+ *
+ * You will need to enable the CONFIG_NET_RADIO define in the kernel
+ * configuration to enable the wireless extensions (this is the one
+ * giving access to the radio network device choice).
+ *
+ * It might also be a good idea as well to fetch the wireless tools to
+ * configure the device and play a bit.
+ */
+
+/* ---------------------------- FILES ---------------------------- */
+/*
+ * wavelan.c: actual code for the driver: C functions
+ *
+ * wavelan.p.h: private header: local types and variables for driver
+ *
+ * wavelan.h: description of the hardware interface and structs
+ *
+ * i82586.h: description of the Ethernet controller
+ */
+
+/* --------------------------- HISTORY --------------------------- */
+/*
+ * This is based on information in the drivers' headers. It may not be
+ * accurate, and I guarantee only my best effort.
+ *
+ * The history of the WaveLAN drivers is as complicated as the history of
+ * the WaveLAN itself (NCR -> AT&T -> Lucent).
+ *
+ * It all started with Anders Klemets <klemets@paul.rutgers.edu>
+ * writing a WaveLAN ISA driver for the Mach microkernel. Girish
+ * Welling <welling@paul.rutgers.edu> had also worked on it.
+ * Keith Moore modified this for the PCMCIA hardware.
+ *
+ * Robert Morris <rtm@das.harvard.edu> ported these two drivers to BSDI
+ * and added specific PCMCIA support (there is currently no equivalent
+ * of the PCMCIA package under BSD).
+ *
+ * Jim Binkley <jrb@cs.pdx.edu> ported both BSDI drivers to FreeBSD.
+ *
+ * Bruce Janson <bruce@cs.usyd.edu.au> ported the BSDI ISA driver to Linux.
+ *
+ * Anthony D. Joseph <adj@lcs.mit.edu> started to modify Bruce's driver
+ * (with help of the BSDI PCMCIA driver) for PCMCIA.
+ * Yunzhou Li <yunzhou@strat.iol.unh.edu> finished this work.
+ * Joe Finney <joe@comp.lancs.ac.uk> patched the driver to start
+ * 2.00 cards correctly (2.4 GHz with frequency selection).
+ * David Hinds <dahinds@users.sourceforge.net> integrated the whole in his
+ * PCMCIA package (and bug corrections).
+ *
+ * I (Jean Tourrilhes - jt@hplb.hpl.hp.com) then started to make some
+ * patches to the PCMCIA driver. Later, I added code in the ISA driver
+ * for Wireless Extensions and full support of frequency selection
+ * cards. Then, I did the same to the PCMCIA driver, and did some
+ * reorganisation. Finally, I came back to the ISA driver to
+ * upgrade it at the same level as the PCMCIA one and reorganise
+ * the code.
+ * Loeke Brederveld <lbrederv@wavelan.com> from Lucent has given me
+ * much needed information on the WaveLAN hardware.
+ */
+
+/* The original copyrights and literature mention others' names and
+ * credits. I don't know what their part in this development was.
+ */
+
+/* By the way, for the copyright and legal stuff:
+ * almost everybody wrote code under the GNU or BSD license (or similar),
+ * and want their original copyright to remain somewhere in the
+ * code (for myself, I go with the GPL).
+ * Nobody wants to take responsibility for anything, except the fame.
+ */
+
+/* --------------------------- CREDITS --------------------------- */
+/*
+ * This software was developed as a component of the
+ * Linux operating system.
+ * It is based on other device drivers and information
+ * either written or supplied by:
+ * Ajay Bakre <bakre@paul.rutgers.edu>,
+ * Donald Becker <becker@cesdis.gsfc.nasa.gov>,
+ * Loeke Brederveld <Loeke.Brederveld@Utrecht.NCR.com>,
+ * Brent Elphick <belphick@uwaterloo.ca>,
+ * Anders Klemets <klemets@it.kth.se>,
+ * Vladimir V. Kolpakov <w@stier.koenig.ru>,
+ * Marc Meertens <Marc.Meertens@Utrecht.NCR.com>,
+ * Pauline Middelink <middelin@polyware.iaf.nl>,
+ * Robert Morris <rtm@das.harvard.edu>,
+ * Jean Tourrilhes <jt@hpl.hp.com>,
+ * Girish Welling <welling@paul.rutgers.edu>,
+ * Clark Woodworth <clark@hiway1.exit109.com>
+ * Yongguang Zhang <ygz@isl.hrl.hac.com>
+ *
+ * Thanks go also to:
+ * James Ashton <jaa101@syseng.anu.edu.au>,
+ * Alan Cox <alan@redhat.com>,
+ * Allan Creighton <allanc@cs.usyd.edu.au>,
+ * Matthew Geier <matthew@cs.usyd.edu.au>,
+ * Remo di Giovanni <remo@cs.usyd.edu.au>,
+ * Eckhard Grah <grah@wrcs1.urz.uni-wuppertal.de>,
+ * Vipul Gupta <vgupta@cs.binghamton.edu>,
+ * Mark Hagan <mhagan@wtcpost.daytonoh.NCR.COM>,
+ * Tim Nicholson <tim@cs.usyd.edu.au>,
+ * Ian Parkin <ian@cs.usyd.edu.au>,
+ * John Rosenberg <johnr@cs.usyd.edu.au>,
+ * George Rossi <george@phm.gov.au>,
+ * Arthur Scott <arthur@cs.usyd.edu.au>,
+ * Stanislav Sinyagin <stas@isf.ru>
+ * and Peter Storey for their assistance and advice.
+ *
+ * Additional Credits:
+ *
+ * My development has been done initially under Debian 1.1 (Linux 2.0.x)
+ * and now under Debian 2.2, initially with an HP Vectra XP/60, and now
+ * an HP Vectra XP/90.
+ *
+ */
+
+/* ------------------------- IMPROVEMENTS ------------------------- */
+/*
+ * I proudly present:
+ *
+ * Changes made in first pre-release:
+ * ----------------------------------
+ * - reorganisation of the code, function name change
+ * - creation of private header (wavelan.p.h)
+ * - reorganised debug messages
+ * - more comments, history, etc.
+ * - mmc_init: configure the PSA if not done
+ * - mmc_init: correct default value of level threshold for PCMCIA
+ * - mmc_init: 2.00 detection better code for 2.00 initialization
+ * - better info at startup
+ * - IRQ setting (note: this setting is permanent)
+ * - watchdog: change strategy (and solve module removal problems)
+ * - add wireless extensions (ioctl and get_wireless_stats)
+ * get/set nwid/frequency on fly, info for /proc/net/wireless
+ * - more wireless extensions: SETSPY and GETSPY
+ * - make wireless extensions optional
+ * - private ioctl to set/get quality and level threshold, histogram
+ * - remove /proc/net/wavelan
+ * - suppress useless stuff from lp (net_local)
+ * - kernel 2.1 support (copy_to/from_user instead of memcpy_to/fromfs)
+ * - add message level (debug stuff in /var/adm/debug and errors not
+ * displayed at console and still in /var/adm/messages)
+ * - multi device support
+ * - start fixing the probe (init code)
+ * - more inlines
+ * - man page
+ * - many other minor details and cleanups
+ *
+ * Changes made in second pre-release:
+ * -----------------------------------
+ * - clean up init code (probe and module init)
+ * - better multiple device support (module)
+ * - name assignment (module)
+ *
+ * Changes made in third pre-release:
+ * ----------------------------------
+ * - be more conservative on timers
+ * - preliminary support for multicast (I still lack some details)
+ *
+ * Changes made in fourth pre-release:
+ * -----------------------------------
+ * - multicast (revisited and finished)
+ * - avoid reset in set_multicast_list (a really big hack)
+ * if somebody could apply this code for other i82586 based drivers
+ * - share onboard memory 75% RU and 25% CU (instead of 50/50)
+ *
+ * Changes made for release in 2.1.15:
+ * -----------------------------------
+ * - change the detection code for multi manufacturer code support
+ *
+ * Changes made for release in 2.1.17:
+ * -----------------------------------
+ * - update to wireless extensions changes
+ * - silly bug in card initial configuration (psa_conf_status)
+ *
+ * Changes made for release in 2.1.27 & 2.0.30:
+ * --------------------------------------------
+ * - small bug in debug code (probably not the last one...)
+ * - remove extern keyword for wavelan_probe()
+ * - level threshold is now a standard wireless extension (version 4 !)
+ * - modules parameters types (new module interface)
+ *
+ * Changes made for release in 2.1.36:
+ * -----------------------------------
+ * - byte count stats (courtesy of David Hinds)
+ * - remove dev_tint stuff (courtesy of David Hinds)
+ * - encryption setting from Brent Elphick (thanks a lot!)
+ * - 'ioaddr' to 'u_long' for the Alpha (thanks to Stanislav Sinyagin)
+ *
+ * Other changes (not by me) :
+ * -------------------------
+ * - Spelling and gramar "rectification".
+ *
+ * Changes made for release in 2.0.37 & 2.2.2 :
+ * ------------------------------------------
+ * - Correct status in /proc/net/wireless
+ * - Set PSA CRC to make PtP diagnostic tool happy (Bob Gray)
+ * - Module init code don't fail if we found at least one card in
+ * the address list (Karlis Peisenieks)
+ * - Missing parenthesis (Christopher Peterson)
+ * - Correct i82586 configuration parameters
+ * - Encryption initialisation bug (Robert McCormack)
+ * - New mac addresses detected in the probe
+ * - Increase watchdog for busy environments
+ *
+ * Changes made for release in 2.0.38 & 2.2.7 :
+ * ------------------------------------------
+ * - Correct the reception logic to better report errors and avoid
+ * sending bogus packet up the stack
+ * - Delay RU config to avoid corrupting first received packet
+ * - Change config completion code (to actually check something)
+ * - Avoid reading out of bound in skbuf to transmit
+ * - Rectify a lot of (useless) debugging code
+ * - Change the way to `#ifdef SET_PSA_CRC'
+ *
+ * Changes made for release in 2.2.11 & 2.3.13 :
+ * -------------------------------------------
+ * - Change e-mail and web page addresses
+ * - Watchdog timer is now correctly expressed in HZ, not in jiffies
+ * - Add channel number to the list of frequencies in range
+ * - Add the (short) list of bit-rates in range
+ * - Developp a new sensitivity... (sens.value & sens.fixed)
+ *
+ * Changes made for release in 2.2.14 & 2.3.23 :
+ * -------------------------------------------
+ * - Fix check for root permission (break instead of exit)
+ * - New nwid & encoding setting (Wireless Extension 9)
+ *
+ * Changes made for release in 2.3.49 :
+ * ----------------------------------
+ * - Indentation reformating (Alan)
+ * - Update to new network API (softnet - 2.3.43) :
+ * o replace dev->tbusy (Alan)
+ * o replace dev->tstart (Alan)
+ * o remove dev->interrupt (Alan)
+ * o add SMP locking via spinlock in splxx (me)
+ * o add spinlock in interrupt handler (me)
+ * o use kernel watchdog instead of ours (me)
+ * o increase watchdog timeout (kernel is more sensitive) (me)
+ * o verify that all the changes make sense and work (me)
+ * - Fixup a potential gotcha when reconfiguring and thighten a bit
+ * the interactions with Tx queue.
+ *
+ * Changes made for release in 2.4.0 :
+ * ---------------------------------
+ * - Fix spinlock stupid bugs that I left in. The driver is now SMP
+ * compliant and doesn't lockup at startup.
+ *
+ * Changes made for release in 2.5.2 :
+ * ---------------------------------
+ * - Use new driver API for Wireless Extensions :
+ * o got rid of wavelan_ioctl()
+ * o use a bunch of iw_handler instead
+ *
+ * Changes made for release in 2.5.35 :
+ * ----------------------------------
+ * - Set dev->trans_start to avoid filling the logs
+ * - Handle better spurious/bogus interrupt
+ * - Avoid deadlocks in mmc_out()/mmc_in()
+ *
+ * Wishes & dreams:
+ * ----------------
+ * - roaming (see Pcmcia driver)
+ */
+
+/***************************** INCLUDES *****************************/
+
+#include <linux/module.h>
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/types.h>
+#include <linux/fcntl.h>
+#include <linux/interrupt.h>
+#include <linux/stat.h>
+#include <linux/ptrace.h>
+#include <linux/ioport.h>
+#include <linux/in.h>
+#include <linux/string.h>
+#include <linux/delay.h>
+#include <linux/bitops.h>
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/dma.h>
+#include <asm/uaccess.h>
+#include <linux/errno.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/slab.h>
+#include <linux/timer.h>
+#include <linux/init.h>
+
+#include <linux/wireless.h> /* Wireless extensions */
+#include <net/iw_handler.h> /* Wireless handlers */
+
+/* WaveLAN declarations */
+#include "i82586.h"
+#include "wavelan.h"
+
+/************************** DRIVER OPTIONS **************************/
+/*
+ * `#define' or `#undef' the following constant to change the behaviour
+ * of the driver...
+ */
+#undef SET_PSA_CRC /* Calculate and set the CRC on PSA (slower) */
+#define USE_PSA_CONFIG /* Use info from the PSA. */
+#undef STRUCT_CHECK /* Verify padding of structures. */
+#undef EEPROM_IS_PROTECTED /* doesn't seem to be necessary */
+#define MULTICAST_AVOID /* Avoid extra multicast (I'm sceptical). */
+#undef SET_MAC_ADDRESS /* Experimental */
+
+#ifdef WIRELESS_EXT /* If wireless extensions exist in the kernel */
+/* Warning: this stuff will slow down the driver. */
+#define WIRELESS_SPY /* Enable spying addresses. */
+#undef HISTOGRAM /* Enable histogram of signal level. */
+#endif
+
+/****************************** DEBUG ******************************/
+
+#undef DEBUG_MODULE_TRACE /* module insertion/removal */
+#undef DEBUG_CALLBACK_TRACE /* calls made by Linux */
+#undef DEBUG_INTERRUPT_TRACE /* calls to handler */
+#undef DEBUG_INTERRUPT_INFO /* type of interrupt and so on */
+#define DEBUG_INTERRUPT_ERROR /* problems */
+#undef DEBUG_CONFIG_TRACE /* Trace the config functions. */
+#undef DEBUG_CONFIG_INFO /* what's going on */
+#define DEBUG_CONFIG_ERROR /* errors on configuration */
+#undef DEBUG_TX_TRACE /* transmission calls */
+#undef DEBUG_TX_INFO /* header of the transmitted packet */
+#undef DEBUG_TX_FAIL /* Normal failure conditions */
+#define DEBUG_TX_ERROR /* Unexpected conditions */
+#undef DEBUG_RX_TRACE /* transmission calls */
+#undef DEBUG_RX_INFO /* header of the received packet */
+#undef DEBUG_RX_FAIL /* Normal failure conditions */
+#define DEBUG_RX_ERROR /* Unexpected conditions */
+
+#undef DEBUG_PACKET_DUMP /* Dump packet on the screen if defined to 32. */
+#undef DEBUG_IOCTL_TRACE /* misc. call by Linux */
+#undef DEBUG_IOCTL_INFO /* various debugging info */
+#define DEBUG_IOCTL_ERROR /* what's going wrong */
+#define DEBUG_BASIC_SHOW /* Show basic startup info. */
+#undef DEBUG_VERSION_SHOW /* Print version info. */
+#undef DEBUG_PSA_SHOW /* Dump PSA to screen. */
+#undef DEBUG_MMC_SHOW /* Dump mmc to screen. */
+#undef DEBUG_SHOW_UNUSED /* Show unused fields too. */
+#undef DEBUG_I82586_SHOW /* Show i82586 status. */
+#undef DEBUG_DEVICE_SHOW /* Show device parameters. */
+
+/************************ CONSTANTS & MACROS ************************/
+
+#ifdef DEBUG_VERSION_SHOW
+static const char *version = "wavelan.c : v24 (SMP + wireless extensions) 11/12/01\n";
+#endif
+
+/* Watchdog temporisation */
+#define WATCHDOG_JIFFIES (512*HZ/100)
+
+/* Macro to get the number of elements in an array */
+#define NELS(a) (sizeof(a) / sizeof(a[0]))
+
+/* ------------------------ PRIVATE IOCTL ------------------------ */
+
+#define SIOCSIPQTHR SIOCIWFIRSTPRIV /* Set quality threshold */
+#define SIOCGIPQTHR SIOCIWFIRSTPRIV + 1 /* Get quality threshold */
+
+#define SIOCSIPHISTO SIOCIWFIRSTPRIV + 2 /* Set histogram ranges */
+#define SIOCGIPHISTO SIOCIWFIRSTPRIV + 3 /* Get histogram values */
+
+/****************************** TYPES ******************************/
+
+/* Shortcuts */
+typedef struct net_device_stats en_stats;
+typedef struct iw_statistics iw_stats;
+typedef struct iw_quality iw_qual;
+typedef struct iw_freq iw_freq;
+typedef struct net_local net_local;
+typedef struct timer_list timer_list;
+
+/* Basic types */
+typedef u_char mac_addr[WAVELAN_ADDR_SIZE]; /* Hardware address */
+
+/*
+ * Static specific data for the interface.
+ *
+ * For each network interface, Linux keeps data in two structures: "device"
+ * keeps the generic data (same format for everybody) and "net_local" keeps
+ * additional specific data.
+ * Note that some of this specific data is in fact generic (en_stats, for
+ * example).
+ */
+struct net_local
+{
+ net_local * next; /* linked list of the devices */
+ struct net_device * dev; /* reverse link */
+ spinlock_t spinlock; /* Serialize access to the hardware (SMP) */
+ en_stats stats; /* Ethernet interface statistics */
+ int nresets; /* number of hardware resets */
+ u_char reconfig_82586; /* We need to reconfigure the controller. */
+ u_char promiscuous; /* promiscuous mode */
+ int mc_count; /* number of multicast addresses */
+ u_short hacr; /* current host interface state */
+
+ int tx_n_in_use;
+ u_short rx_head;
+ u_short rx_last;
+ u_short tx_first_free;
+ u_short tx_first_in_use;
+
+#ifdef WIRELESS_EXT
+ iw_stats wstats; /* Wireless-specific statistics */
+
+ struct iw_spy_data spy_data;
+ struct iw_public_data wireless_data;
+#endif
+
+#ifdef HISTOGRAM
+ int his_number; /* number of intervals */
+ u_char his_range[16]; /* boundaries of interval ]n-1; n] */
+ u_long his_sum[16]; /* sum in interval */
+#endif /* HISTOGRAM */
+};
+
+/**************************** PROTOTYPES ****************************/
+
+/* ----------------------- MISC. SUBROUTINES ------------------------ */
+static u_char
+ wv_irq_to_psa(int);
+static int
+ wv_psa_to_irq(u_char);
+/* ------------------- HOST ADAPTER SUBROUTINES ------------------- */
+static inline u_short /* data */
+ hasr_read(u_long); /* Read the host interface: base address */
+static inline void
+ hacr_write(u_long, /* Write to host interface: base address */
+ u_short), /* data */
+ hacr_write_slow(u_long,
+ u_short),
+ set_chan_attn(u_long, /* ioaddr */
+ u_short), /* hacr */
+ wv_hacr_reset(u_long), /* ioaddr */
+ wv_16_off(u_long, /* ioaddr */
+ u_short), /* hacr */
+ wv_16_on(u_long, /* ioaddr */
+ u_short), /* hacr */
+ wv_ints_off(struct net_device *),
+ wv_ints_on(struct net_device *);
+/* ----------------- MODEM MANAGEMENT SUBROUTINES ----------------- */
+static void
+ psa_read(u_long, /* Read the Parameter Storage Area. */
+ u_short, /* hacr */
+ int, /* offset in PSA */
+ u_char *, /* buffer to fill */
+ int), /* size to read */
+ psa_write(u_long, /* Write to the PSA. */
+ u_short, /* hacr */
+ int, /* offset in PSA */
+ u_char *, /* buffer in memory */
+ int); /* length of buffer */
+static inline void
+ mmc_out(u_long, /* Write 1 byte to the Modem Manag Control. */
+ u_short,
+ u_char),
+ mmc_write(u_long, /* Write n bytes to the MMC. */
+ u_char,
+ u_char *,
+ int);
+static inline u_char /* Read 1 byte from the MMC. */
+ mmc_in(u_long,
+ u_short);
+static inline void
+ mmc_read(u_long, /* Read n bytes from the MMC. */
+ u_char,
+ u_char *,
+ int),
+ fee_wait(u_long, /* Wait for frequency EEPROM: base address */
+ int, /* base delay to wait for */
+ int); /* time to wait */
+static void
+ fee_read(u_long, /* Read the frequency EEPROM: base address */
+ u_short, /* destination offset */
+ u_short *, /* data buffer */
+ int); /* number of registers */
+/* ---------------------- I82586 SUBROUTINES ----------------------- */
+static /*inline*/ void
+ obram_read(u_long, /* ioaddr */
+ u_short, /* o */
+ u_char *, /* b */
+ int); /* n */
+static inline void
+ obram_write(u_long, /* ioaddr */
+ u_short, /* o */
+ u_char *, /* b */
+ int); /* n */
+static void
+ wv_ack(struct net_device *);
+static inline int
+ wv_synchronous_cmd(struct net_device *,
+ const char *),
+ wv_config_complete(struct net_device *,
+ u_long,
+ net_local *);
+static int
+ wv_complete(struct net_device *,
+ u_long,
+ net_local *);
+static inline void
+ wv_82586_reconfig(struct net_device *);
+/* ------------------- DEBUG & INFO SUBROUTINES ------------------- */
+#ifdef DEBUG_I82586_SHOW
+static void
+ wv_scb_show(unsigned short);
+#endif
+static inline void
+ wv_init_info(struct net_device *); /* display startup info */
+/* ------------------- IOCTL, STATS & RECONFIG ------------------- */
+static en_stats *
+ wavelan_get_stats(struct net_device *); /* Give stats /proc/net/dev */
+static iw_stats *
+ wavelan_get_wireless_stats(struct net_device *);
+static void
+ wavelan_set_multicast_list(struct net_device *);
+/* ----------------------- PACKET RECEPTION ----------------------- */
+static inline void
+ wv_packet_read(struct net_device *, /* Read a packet from a frame. */
+ u_short,
+ int),
+ wv_receive(struct net_device *); /* Read all packets waiting. */
+/* --------------------- PACKET TRANSMISSION --------------------- */
+static inline int
+ wv_packet_write(struct net_device *, /* Write a packet to the Tx buffer. */
+ void *,
+ short);
+static int
+ wavelan_packet_xmit(struct sk_buff *, /* Send a packet. */
+ struct net_device *);
+/* -------------------- HARDWARE CONFIGURATION -------------------- */
+static inline int
+ wv_mmc_init(struct net_device *), /* Initialize the modem. */
+ wv_ru_start(struct net_device *), /* Start the i82586 receiver unit. */
+ wv_cu_start(struct net_device *), /* Start the i82586 command unit. */
+ wv_82586_start(struct net_device *); /* Start the i82586. */
+static void
+ wv_82586_config(struct net_device *); /* Configure the i82586. */
+static inline void
+ wv_82586_stop(struct net_device *);
+static int
+ wv_hw_reset(struct net_device *), /* Reset the WaveLAN hardware. */
+ wv_check_ioaddr(u_long, /* ioaddr */
+ u_char *); /* mac address (read) */
+/* ---------------------- INTERRUPT HANDLING ---------------------- */
+static irqreturn_t
+ wavelan_interrupt(int, /* interrupt handler */
+ void *,
+ struct pt_regs *);
+static void
+ wavelan_watchdog(struct net_device *); /* transmission watchdog */
+/* ------------------- CONFIGURATION CALLBACKS ------------------- */
+static int
+ wavelan_open(struct net_device *), /* Open the device. */
+ wavelan_close(struct net_device *), /* Close the device. */
+ wavelan_config(struct net_device *, unsigned short);/* Configure one device. */
+extern struct net_device *wavelan_probe(int unit); /* See Space.c. */
+
+/**************************** VARIABLES ****************************/
+
+/*
+ * This is the root of the linked list of WaveLAN drivers
+ * It is use to verify that we don't reuse the same base address
+ * for two different drivers and to clean up when removing the module.
+ */
+static net_local * wavelan_list = (net_local *) NULL;
+
+/*
+ * This table is used to translate the PSA value to IRQ number
+ * and vice versa.
+ */
+static u_char irqvals[] =
+{
+ 0, 0, 0, 0x01,
+ 0x02, 0x04, 0, 0x08,
+ 0, 0, 0x10, 0x20,
+ 0x40, 0, 0, 0x80,
+};
+
+/*
+ * Table of the available I/O addresses (base addresses) for WaveLAN
+ */
+static unsigned short iobase[] =
+{
+#if 0
+ /* Leave out 0x3C0 for now -- seems to clash with some video
+ * controllers.
+ * Leave out the others too -- we will always use 0x390 and leave
+ * 0x300 for the Ethernet device.
+ * Jean II: 0x3E0 is fine as well.
+ */
+ 0x300, 0x390, 0x3E0, 0x3C0
+#endif /* 0 */
+ 0x390, 0x3E0
+};
+
+#ifdef MODULE
+/* Parameters set by insmod */
+static int io[4];
+static int irq[4];
+static char *name[4];
+module_param_array(io, int, NULL, 0);
+module_param_array(irq, int, NULL, 0);
+module_param_array(name, charp, NULL, 0);
+
+MODULE_PARM_DESC(io, "WaveLAN I/O base address(es),required");
+MODULE_PARM_DESC(irq, "WaveLAN IRQ number(s)");
+MODULE_PARM_DESC(name, "WaveLAN interface neme(s)");
+#endif /* MODULE */
+
+#endif /* WAVELAN_P_H */
diff --git a/drivers/net/wireless/wavelan_cs.c b/drivers/net/wireless/wavelan_cs.c
new file mode 100644
index 0000000..ec83297
--- /dev/null
+++ b/drivers/net/wireless/wavelan_cs.c
@@ -0,0 +1,4914 @@
+/*
+ * Wavelan Pcmcia driver
+ *
+ * Jean II - HPLB '96
+ *
+ * Reorganisation and extension of the driver.
+ * Original copyright follow. See wavelan_cs.p.h for details.
+ *
+ * This code is derived from Anthony D. Joseph's code and all the changes here
+ * are also under the original copyright below.
+ *
+ * This code supports version 2.00 of WaveLAN/PCMCIA cards (2.4GHz), and
+ * can work on Linux 2.0.36 with support of David Hinds' PCMCIA Card Services
+ *
+ * Joe Finney (joe@comp.lancs.ac.uk) at Lancaster University in UK added
+ * critical code in the routine to initialize the Modem Management Controller.
+ *
+ * Thanks to Alan Cox and Bruce Janson for their advice.
+ *
+ * -- Yunzhou Li (scip4166@nus.sg)
+ *
+#ifdef WAVELAN_ROAMING
+ * Roaming support added 07/22/98 by Justin Seger (jseger@media.mit.edu)
+ * based on patch by Joe Finney from Lancaster University.
+#endif
+ *
+ * Lucent (formerly AT&T GIS, formerly NCR) WaveLAN PCMCIA card: An
+ * Ethernet-like radio transceiver controlled by an Intel 82593 coprocessor.
+ *
+ * A non-shared memory PCMCIA ethernet driver for linux
+ *
+ * ISA version modified to support PCMCIA by Anthony Joseph (adj@lcs.mit.edu)
+ *
+ *
+ * Joseph O'Sullivan & John Langford (josullvn@cs.cmu.edu & jcl@cs.cmu.edu)
+ *
+ * Apr 2 '98 made changes to bring the i82593 control/int handling in line
+ * with offical specs...
+ *
+ ****************************************************************************
+ * Copyright 1995
+ * Anthony D. Joseph
+ * Massachusetts Institute of Technology
+ *
+ * Permission to use, copy, modify, and distribute this program
+ * for any purpose and without fee is hereby granted, provided
+ * that this copyright and permission notice appear on all copies
+ * and supporting documentation, the name of M.I.T. not be used
+ * in advertising or publicity pertaining to distribution of the
+ * program without specific prior permission, and notice be given
+ * in supporting documentation that copying and distribution is
+ * by permission of M.I.T. M.I.T. makes no representations about
+ * the suitability of this software for any purpose. It is pro-
+ * vided "as is" without express or implied warranty.
+ ****************************************************************************
+ *
+ */
+
+/* Do *NOT* add other headers here, you are guaranteed to be wrong - Jean II */
+#include "wavelan_cs.p.h" /* Private header */
+
+/************************* MISC SUBROUTINES **************************/
+/*
+ * Subroutines which won't fit in one of the following category
+ * (wavelan modem or i82593)
+ */
+
+#ifdef STRUCT_CHECK
+/*------------------------------------------------------------------*/
+/*
+ * Sanity routine to verify the sizes of the various WaveLAN interface
+ * structures.
+ */
+static char *
+wv_structuct_check(void)
+{
+#define SC(t,s,n) if (sizeof(t) != s) return(n);
+
+ SC(psa_t, PSA_SIZE, "psa_t");
+ SC(mmw_t, MMW_SIZE, "mmw_t");
+ SC(mmr_t, MMR_SIZE, "mmr_t");
+
+#undef SC
+
+ return((char *) NULL);
+} /* wv_structuct_check */
+#endif /* STRUCT_CHECK */
+
+/******************* MODEM MANAGEMENT SUBROUTINES *******************/
+/*
+ * Useful subroutines to manage the modem of the wavelan
+ */
+
+/*------------------------------------------------------------------*/
+/*
+ * Read from card's Host Adaptor Status Register.
+ */
+static inline u_char
+hasr_read(u_long base)
+{
+ return(inb(HASR(base)));
+} /* hasr_read */
+
+/*------------------------------------------------------------------*/
+/*
+ * Write to card's Host Adapter Command Register.
+ */
+static inline void
+hacr_write(u_long base,
+ u_char hacr)
+{
+ outb(hacr, HACR(base));
+} /* hacr_write */
+
+/*------------------------------------------------------------------*/
+/*
+ * Write to card's Host Adapter Command Register. Include a delay for
+ * those times when it is needed.
+ */
+static inline void
+hacr_write_slow(u_long base,
+ u_char hacr)
+{
+ hacr_write(base, hacr);
+ /* delay might only be needed sometimes */
+ mdelay(1);
+} /* hacr_write_slow */
+
+/*------------------------------------------------------------------*/
+/*
+ * Read the Parameter Storage Area from the WaveLAN card's memory
+ */
+static void
+psa_read(struct net_device * dev,
+ int o, /* offset in PSA */
+ u_char * b, /* buffer to fill */
+ int n) /* size to read */
+{
+ net_local *lp = netdev_priv(dev);
+ u_char __iomem *ptr = lp->mem + PSA_ADDR + (o << 1);
+
+ while(n-- > 0)
+ {
+ *b++ = readb(ptr);
+ /* Due to a lack of address decode pins, the WaveLAN PCMCIA card
+ * only supports reading even memory addresses. That means the
+ * increment here MUST be two.
+ * Because of that, we can't use memcpy_fromio()...
+ */
+ ptr += 2;
+ }
+} /* psa_read */
+
+/*------------------------------------------------------------------*/
+/*
+ * Write the Paramter Storage Area to the WaveLAN card's memory
+ */
+static void
+psa_write(struct net_device * dev,
+ int o, /* Offset in psa */
+ u_char * b, /* Buffer in memory */
+ int n) /* Length of buffer */
+{
+ net_local *lp = netdev_priv(dev);
+ u_char __iomem *ptr = lp->mem + PSA_ADDR + (o << 1);
+ int count = 0;
+ kio_addr_t base = dev->base_addr;
+ /* As there seem to have no flag PSA_BUSY as in the ISA model, we are
+ * oblige to verify this address to know when the PSA is ready... */
+ volatile u_char __iomem *verify = lp->mem + PSA_ADDR +
+ (psaoff(0, psa_comp_number) << 1);
+
+ /* Authorize writting to PSA */
+ hacr_write(base, HACR_PWR_STAT | HACR_ROM_WEN);
+
+ while(n-- > 0)
+ {
+ /* write to PSA */
+ writeb(*b++, ptr);
+ ptr += 2;
+
+ /* I don't have the spec, so I don't know what the correct
+ * sequence to write is. This hack seem to work for me... */
+ count = 0;
+ while((readb(verify) != PSA_COMP_PCMCIA_915) && (count++ < 100))
+ mdelay(1);
+ }
+
+ /* Put the host interface back in standard state */
+ hacr_write(base, HACR_DEFAULT);
+} /* psa_write */
+
+#ifdef SET_PSA_CRC
+/*------------------------------------------------------------------*/
+/*
+ * Calculate the PSA CRC
+ * Thanks to Valster, Nico <NVALSTER@wcnd.nl.lucent.com> for the code
+ * NOTE: By specifying a length including the CRC position the
+ * returned value should be zero. (i.e. a correct checksum in the PSA)
+ *
+ * The Windows drivers don't use the CRC, but the AP and the PtP tool
+ * depend on it.
+ */
+static u_short
+psa_crc(unsigned char * psa, /* The PSA */
+ int size) /* Number of short for CRC */
+{
+ int byte_cnt; /* Loop on the PSA */
+ u_short crc_bytes = 0; /* Data in the PSA */
+ int bit_cnt; /* Loop on the bits of the short */
+
+ for(byte_cnt = 0; byte_cnt < size; byte_cnt++ )
+ {
+ crc_bytes ^= psa[byte_cnt]; /* Its an xor */
+
+ for(bit_cnt = 1; bit_cnt < 9; bit_cnt++ )
+ {
+ if(crc_bytes & 0x0001)
+ crc_bytes = (crc_bytes >> 1) ^ 0xA001;
+ else
+ crc_bytes >>= 1 ;
+ }
+ }
+
+ return crc_bytes;
+} /* psa_crc */
+#endif /* SET_PSA_CRC */
+
+/*------------------------------------------------------------------*/
+/*
+ * update the checksum field in the Wavelan's PSA
+ */
+static void
+update_psa_checksum(struct net_device * dev)
+{
+#ifdef SET_PSA_CRC
+ psa_t psa;
+ u_short crc;
+
+ /* read the parameter storage area */
+ psa_read(dev, 0, (unsigned char *) &psa, sizeof(psa));
+
+ /* update the checksum */
+ crc = psa_crc((unsigned char *) &psa,
+ sizeof(psa) - sizeof(psa.psa_crc[0]) - sizeof(psa.psa_crc[1])
+ - sizeof(psa.psa_crc_status));
+
+ psa.psa_crc[0] = crc & 0xFF;
+ psa.psa_crc[1] = (crc & 0xFF00) >> 8;
+
+ /* Write it ! */
+ psa_write(dev, (char *)&psa.psa_crc - (char *)&psa,
+ (unsigned char *)&psa.psa_crc, 2);
+
+#ifdef DEBUG_IOCTL_INFO
+ printk (KERN_DEBUG "%s: update_psa_checksum(): crc = 0x%02x%02x\n",
+ dev->name, psa.psa_crc[0], psa.psa_crc[1]);
+
+ /* Check again (luxury !) */
+ crc = psa_crc((unsigned char *) &psa,
+ sizeof(psa) - sizeof(psa.psa_crc_status));
+
+ if(crc != 0)
+ printk(KERN_WARNING "%s: update_psa_checksum(): CRC does not agree with PSA data (even after recalculating)\n", dev->name);
+#endif /* DEBUG_IOCTL_INFO */
+#endif /* SET_PSA_CRC */
+} /* update_psa_checksum */
+
+/*------------------------------------------------------------------*/
+/*
+ * Write 1 byte to the MMC.
+ */
+static inline void
+mmc_out(u_long base,
+ u_short o,
+ u_char d)
+{
+ int count = 0;
+
+ /* Wait for MMC to go idle */
+ while((count++ < 100) && (inb(HASR(base)) & HASR_MMI_BUSY))
+ udelay(10);
+
+ outb((u_char)((o << 1) | MMR_MMI_WR), MMR(base));
+ outb(d, MMD(base));
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Routine to write bytes to the Modem Management Controller.
+ * We start by the end because it is the way it should be !
+ */
+static inline void
+mmc_write(u_long base,
+ u_char o,
+ u_char * b,
+ int n)
+{
+ o += n;
+ b += n;
+
+ while(n-- > 0 )
+ mmc_out(base, --o, *(--b));
+} /* mmc_write */
+
+/*------------------------------------------------------------------*/
+/*
+ * Read 1 byte from the MMC.
+ * Optimised version for 1 byte, avoid using memory...
+ */
+static inline u_char
+mmc_in(u_long base,
+ u_short o)
+{
+ int count = 0;
+
+ while((count++ < 100) && (inb(HASR(base)) & HASR_MMI_BUSY))
+ udelay(10);
+ outb(o << 1, MMR(base)); /* Set the read address */
+
+ outb(0, MMD(base)); /* Required dummy write */
+
+ while((count++ < 100) && (inb(HASR(base)) & HASR_MMI_BUSY))
+ udelay(10);
+ return (u_char) (inb(MMD(base))); /* Now do the actual read */
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Routine to read bytes from the Modem Management Controller.
+ * The implementation is complicated by a lack of address lines,
+ * which prevents decoding of the low-order bit.
+ * (code has just been moved in the above function)
+ * We start by the end because it is the way it should be !
+ */
+static inline void
+mmc_read(u_long base,
+ u_char o,
+ u_char * b,
+ int n)
+{
+ o += n;
+ b += n;
+
+ while(n-- > 0)
+ *(--b) = mmc_in(base, --o);
+} /* mmc_read */
+
+/*------------------------------------------------------------------*/
+/*
+ * Get the type of encryption available...
+ */
+static inline int
+mmc_encr(u_long base) /* i/o port of the card */
+{
+ int temp;
+
+ temp = mmc_in(base, mmroff(0, mmr_des_avail));
+ if((temp != MMR_DES_AVAIL_DES) && (temp != MMR_DES_AVAIL_AES))
+ return 0;
+ else
+ return temp;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Wait for the frequency EEprom to complete a command...
+ * I hope this one will be optimally inlined...
+ */
+static inline void
+fee_wait(u_long base, /* i/o port of the card */
+ int delay, /* Base delay to wait for */
+ int number) /* Number of time to wait */
+{
+ int count = 0; /* Wait only a limited time */
+
+ while((count++ < number) &&
+ (mmc_in(base, mmroff(0, mmr_fee_status)) & MMR_FEE_STATUS_BUSY))
+ udelay(delay);
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Read bytes from the Frequency EEprom (frequency select cards).
+ */
+static void
+fee_read(u_long base, /* i/o port of the card */
+ u_short o, /* destination offset */
+ u_short * b, /* data buffer */
+ int n) /* number of registers */
+{
+ b += n; /* Position at the end of the area */
+
+ /* Write the address */
+ mmc_out(base, mmwoff(0, mmw_fee_addr), o + n - 1);
+
+ /* Loop on all buffer */
+ while(n-- > 0)
+ {
+ /* Write the read command */
+ mmc_out(base, mmwoff(0, mmw_fee_ctrl), MMW_FEE_CTRL_READ);
+
+ /* Wait until EEprom is ready (should be quick !) */
+ fee_wait(base, 10, 100);
+
+ /* Read the value */
+ *--b = ((mmc_in(base, mmroff(0, mmr_fee_data_h)) << 8) |
+ mmc_in(base, mmroff(0, mmr_fee_data_l)));
+ }
+}
+
+#ifdef WIRELESS_EXT /* If wireless extension exist in the kernel */
+
+/*------------------------------------------------------------------*/
+/*
+ * Write bytes from the Frequency EEprom (frequency select cards).
+ * This is a bit complicated, because the frequency eeprom has to
+ * be unprotected and the write enabled.
+ * Jean II
+ */
+static void
+fee_write(u_long base, /* i/o port of the card */
+ u_short o, /* destination offset */
+ u_short * b, /* data buffer */
+ int n) /* number of registers */
+{
+ b += n; /* Position at the end of the area */
+
+#ifdef EEPROM_IS_PROTECTED /* disabled */
+#ifdef DOESNT_SEEM_TO_WORK /* disabled */
+ /* Ask to read the protected register */
+ mmc_out(base, mmwoff(0, mmw_fee_ctrl), MMW_FEE_CTRL_PRREAD);
+
+ fee_wait(base, 10, 100);
+
+ /* Read the protected register */
+ printk("Protected 2 : %02X-%02X\n",
+ mmc_in(base, mmroff(0, mmr_fee_data_h)),
+ mmc_in(base, mmroff(0, mmr_fee_data_l)));
+#endif /* DOESNT_SEEM_TO_WORK */
+
+ /* Enable protected register */
+ mmc_out(base, mmwoff(0, mmw_fee_addr), MMW_FEE_ADDR_EN);
+ mmc_out(base, mmwoff(0, mmw_fee_ctrl), MMW_FEE_CTRL_PREN);
+
+ fee_wait(base, 10, 100);
+
+ /* Unprotect area */
+ mmc_out(base, mmwoff(0, mmw_fee_addr), o + n);
+ mmc_out(base, mmwoff(0, mmw_fee_ctrl), MMW_FEE_CTRL_PRWRITE);
+#ifdef DOESNT_SEEM_TO_WORK /* disabled */
+ /* Or use : */
+ mmc_out(base, mmwoff(0, mmw_fee_ctrl), MMW_FEE_CTRL_PRCLEAR);
+#endif /* DOESNT_SEEM_TO_WORK */
+
+ fee_wait(base, 10, 100);
+#endif /* EEPROM_IS_PROTECTED */
+
+ /* Write enable */
+ mmc_out(base, mmwoff(0, mmw_fee_addr), MMW_FEE_ADDR_EN);
+ mmc_out(base, mmwoff(0, mmw_fee_ctrl), MMW_FEE_CTRL_WREN);
+
+ fee_wait(base, 10, 100);
+
+ /* Write the EEprom address */
+ mmc_out(base, mmwoff(0, mmw_fee_addr), o + n - 1);
+
+ /* Loop on all buffer */
+ while(n-- > 0)
+ {
+ /* Write the value */
+ mmc_out(base, mmwoff(0, mmw_fee_data_h), (*--b) >> 8);
+ mmc_out(base, mmwoff(0, mmw_fee_data_l), *b & 0xFF);
+
+ /* Write the write command */
+ mmc_out(base, mmwoff(0, mmw_fee_ctrl), MMW_FEE_CTRL_WRITE);
+
+ /* Wavelan doc says : wait at least 10 ms for EEBUSY = 0 */
+ mdelay(10);
+ fee_wait(base, 10, 100);
+ }
+
+ /* Write disable */
+ mmc_out(base, mmwoff(0, mmw_fee_addr), MMW_FEE_ADDR_DS);
+ mmc_out(base, mmwoff(0, mmw_fee_ctrl), MMW_FEE_CTRL_WDS);
+
+ fee_wait(base, 10, 100);
+
+#ifdef EEPROM_IS_PROTECTED /* disabled */
+ /* Reprotect EEprom */
+ mmc_out(base, mmwoff(0, mmw_fee_addr), 0x00);
+ mmc_out(base, mmwoff(0, mmw_fee_ctrl), MMW_FEE_CTRL_PRWRITE);
+
+ fee_wait(base, 10, 100);
+#endif /* EEPROM_IS_PROTECTED */
+}
+#endif /* WIRELESS_EXT */
+
+/******************* WaveLAN Roaming routines... ********************/
+
+#ifdef WAVELAN_ROAMING /* Conditional compile, see wavelan_cs.h */
+
+unsigned char WAVELAN_BEACON_ADDRESS[]= {0x09,0x00,0x0e,0x20,0x03,0x00};
+
+void wv_roam_init(struct net_device *dev)
+{
+ net_local *lp= netdev_priv(dev);
+
+ /* Do not remove this unless you have a good reason */
+ printk(KERN_NOTICE "%s: Warning, you have enabled roaming on"
+ " device %s !\n", dev->name, dev->name);
+ printk(KERN_NOTICE "Roaming is currently an experimental unsupported feature"
+ " of the Wavelan driver.\n");
+ printk(KERN_NOTICE "It may work, but may also make the driver behave in"
+ " erratic ways or crash.\n");
+
+ lp->wavepoint_table.head=NULL; /* Initialise WavePoint table */
+ lp->wavepoint_table.num_wavepoints=0;
+ lp->wavepoint_table.locked=0;
+ lp->curr_point=NULL; /* No default WavePoint */
+ lp->cell_search=0;
+
+ lp->cell_timer.data=(long)lp; /* Start cell expiry timer */
+ lp->cell_timer.function=wl_cell_expiry;
+ lp->cell_timer.expires=jiffies+CELL_TIMEOUT;
+ add_timer(&lp->cell_timer);
+
+ wv_nwid_filter(NWID_PROMISC,lp) ; /* Enter NWID promiscuous mode */
+ /* to build up a good WavePoint */
+ /* table... */
+ printk(KERN_DEBUG "WaveLAN: Roaming enabled on device %s\n",dev->name);
+}
+
+void wv_roam_cleanup(struct net_device *dev)
+{
+ wavepoint_history *ptr,*old_ptr;
+ net_local *lp= netdev_priv(dev);
+
+ printk(KERN_DEBUG "WaveLAN: Roaming Disabled on device %s\n",dev->name);
+
+ /* Fixme : maybe we should check that the timer exist before deleting it */
+ del_timer(&lp->cell_timer); /* Remove cell expiry timer */
+ ptr=lp->wavepoint_table.head; /* Clear device's WavePoint table */
+ while(ptr!=NULL)
+ {
+ old_ptr=ptr;
+ ptr=ptr->next;
+ wl_del_wavepoint(old_ptr,lp);
+ }
+}
+
+/* Enable/Disable NWID promiscuous mode on a given device */
+void wv_nwid_filter(unsigned char mode, net_local *lp)
+{
+ mm_t m;
+ unsigned long flags;
+
+#ifdef WAVELAN_ROAMING_DEBUG
+ printk(KERN_DEBUG "WaveLAN: NWID promisc %s, device %s\n",(mode==NWID_PROMISC) ? "on" : "off", lp->dev->name);
+#endif
+
+ /* Disable interrupts & save flags */
+ spin_lock_irqsave(&lp->spinlock, flags);
+
+ m.w.mmw_loopt_sel = (mode==NWID_PROMISC) ? MMW_LOOPT_SEL_DIS_NWID : 0x00;
+ mmc_write(lp->dev->base_addr, (char *)&m.w.mmw_loopt_sel - (char *)&m, (unsigned char *)&m.w.mmw_loopt_sel, 1);
+
+ if(mode==NWID_PROMISC)
+ lp->cell_search=1;
+ else
+ lp->cell_search=0;
+
+ /* ReEnable interrupts & restore flags */
+ spin_unlock_irqrestore(&lp->spinlock, flags);
+}
+
+/* Find a record in the WavePoint table matching a given NWID */
+wavepoint_history *wl_roam_check(unsigned short nwid, net_local *lp)
+{
+ wavepoint_history *ptr=lp->wavepoint_table.head;
+
+ while(ptr!=NULL){
+ if(ptr->nwid==nwid)
+ return ptr;
+ ptr=ptr->next;
+ }
+ return NULL;
+}
+
+/* Create a new wavepoint table entry */
+wavepoint_history *wl_new_wavepoint(unsigned short nwid, unsigned char seq, net_local* lp)
+{
+ wavepoint_history *new_wavepoint;
+
+#ifdef WAVELAN_ROAMING_DEBUG
+ printk(KERN_DEBUG "WaveLAN: New Wavepoint, NWID:%.4X\n",nwid);
+#endif
+
+ if(lp->wavepoint_table.num_wavepoints==MAX_WAVEPOINTS)
+ return NULL;
+
+ new_wavepoint=(wavepoint_history *) kmalloc(sizeof(wavepoint_history),GFP_ATOMIC);
+ if(new_wavepoint==NULL)
+ return NULL;
+
+ new_wavepoint->nwid=nwid; /* New WavePoints NWID */
+ new_wavepoint->average_fast=0; /* Running Averages..*/
+ new_wavepoint->average_slow=0;
+ new_wavepoint->qualptr=0; /* Start of ringbuffer */
+ new_wavepoint->last_seq=seq-1; /* Last sequence no.seen */
+ memset(new_wavepoint->sigqual,0,WAVEPOINT_HISTORY);/* Empty ringbuffer */
+
+ new_wavepoint->next=lp->wavepoint_table.head;/* Add to wavepoint table */
+ new_wavepoint->prev=NULL;
+
+ if(lp->wavepoint_table.head!=NULL)
+ lp->wavepoint_table.head->prev=new_wavepoint;
+
+ lp->wavepoint_table.head=new_wavepoint;
+
+ lp->wavepoint_table.num_wavepoints++; /* no. of visible wavepoints */
+
+ return new_wavepoint;
+}
+
+/* Remove a wavepoint entry from WavePoint table */
+void wl_del_wavepoint(wavepoint_history *wavepoint, struct net_local *lp)
+{
+ if(wavepoint==NULL)
+ return;
+
+ if(lp->curr_point==wavepoint)
+ lp->curr_point=NULL;
+
+ if(wavepoint->prev!=NULL)
+ wavepoint->prev->next=wavepoint->next;
+
+ if(wavepoint->next!=NULL)
+ wavepoint->next->prev=wavepoint->prev;
+
+ if(lp->wavepoint_table.head==wavepoint)
+ lp->wavepoint_table.head=wavepoint->next;
+
+ lp->wavepoint_table.num_wavepoints--;
+ kfree(wavepoint);
+}
+
+/* Timer callback function - checks WavePoint table for stale entries */
+void wl_cell_expiry(unsigned long data)
+{
+ net_local *lp=(net_local *)data;
+ wavepoint_history *wavepoint=lp->wavepoint_table.head,*old_point;
+
+#if WAVELAN_ROAMING_DEBUG > 1
+ printk(KERN_DEBUG "WaveLAN: Wavepoint timeout, dev %s\n",lp->dev->name);
+#endif
+
+ if(lp->wavepoint_table.locked)
+ {
+#if WAVELAN_ROAMING_DEBUG > 1
+ printk(KERN_DEBUG "WaveLAN: Wavepoint table locked...\n");
+#endif
+
+ lp->cell_timer.expires=jiffies+1; /* If table in use, come back later */
+ add_timer(&lp->cell_timer);
+ return;
+ }
+
+ while(wavepoint!=NULL)
+ {
+ if(time_after(jiffies, wavepoint->last_seen + CELL_TIMEOUT))
+ {
+#ifdef WAVELAN_ROAMING_DEBUG
+ printk(KERN_DEBUG "WaveLAN: Bye bye %.4X\n",wavepoint->nwid);
+#endif
+
+ old_point=wavepoint;
+ wavepoint=wavepoint->next;
+ wl_del_wavepoint(old_point,lp);
+ }
+ else
+ wavepoint=wavepoint->next;
+ }
+ lp->cell_timer.expires=jiffies+CELL_TIMEOUT;
+ add_timer(&lp->cell_timer);
+}
+
+/* Update SNR history of a wavepoint */
+void wl_update_history(wavepoint_history *wavepoint, unsigned char sigqual, unsigned char seq)
+{
+ int i=0,num_missed=0,ptr=0;
+ int average_fast=0,average_slow=0;
+
+ num_missed=(seq-wavepoint->last_seq)%WAVEPOINT_HISTORY;/* Have we missed
+ any beacons? */
+ if(num_missed)
+ for(i=0;i<num_missed;i++)
+ {
+ wavepoint->sigqual[wavepoint->qualptr++]=0; /* If so, enter them as 0's */
+ wavepoint->qualptr %=WAVEPOINT_HISTORY; /* in the ringbuffer. */
+ }
+ wavepoint->last_seen=jiffies; /* Add beacon to history */
+ wavepoint->last_seq=seq;
+ wavepoint->sigqual[wavepoint->qualptr++]=sigqual;
+ wavepoint->qualptr %=WAVEPOINT_HISTORY;
+ ptr=(wavepoint->qualptr-WAVEPOINT_FAST_HISTORY+WAVEPOINT_HISTORY)%WAVEPOINT_HISTORY;
+
+ for(i=0;i<WAVEPOINT_FAST_HISTORY;i++) /* Update running averages */
+ {
+ average_fast+=wavepoint->sigqual[ptr++];
+ ptr %=WAVEPOINT_HISTORY;
+ }
+
+ average_slow=average_fast;
+ for(i=WAVEPOINT_FAST_HISTORY;i<WAVEPOINT_HISTORY;i++)
+ {
+ average_slow+=wavepoint->sigqual[ptr++];
+ ptr %=WAVEPOINT_HISTORY;
+ }
+
+ wavepoint->average_fast=average_fast/WAVEPOINT_FAST_HISTORY;
+ wavepoint->average_slow=average_slow/WAVEPOINT_HISTORY;
+}
+
+/* Perform a handover to a new WavePoint */
+void wv_roam_handover(wavepoint_history *wavepoint, net_local *lp)
+{
+ kio_addr_t base = lp->dev->base_addr;
+ mm_t m;
+ unsigned long flags;
+
+ if(wavepoint==lp->curr_point) /* Sanity check... */
+ {
+ wv_nwid_filter(!NWID_PROMISC,lp);
+ return;
+ }
+
+#ifdef WAVELAN_ROAMING_DEBUG
+ printk(KERN_DEBUG "WaveLAN: Doing handover to %.4X, dev %s\n",wavepoint->nwid,lp->dev->name);
+#endif
+
+ /* Disable interrupts & save flags */
+ spin_lock_irqsave(&lp->spinlock, flags);
+
+ m.w.mmw_netw_id_l = wavepoint->nwid & 0xFF;
+ m.w.mmw_netw_id_h = (wavepoint->nwid & 0xFF00) >> 8;
+
+ mmc_write(base, (char *)&m.w.mmw_netw_id_l - (char *)&m, (unsigned char *)&m.w.mmw_netw_id_l, 2);
+
+ /* ReEnable interrupts & restore flags */
+ spin_unlock_irqrestore(&lp->spinlock, flags);
+
+ wv_nwid_filter(!NWID_PROMISC,lp);
+ lp->curr_point=wavepoint;
+}
+
+/* Called when a WavePoint beacon is received */
+static inline void wl_roam_gather(struct net_device * dev,
+ u_char * hdr, /* Beacon header */
+ u_char * stats) /* SNR, Signal quality
+ of packet */
+{
+ wavepoint_beacon *beacon= (wavepoint_beacon *)hdr; /* Rcvd. Beacon */
+ unsigned short nwid=ntohs(beacon->nwid);
+ unsigned short sigqual=stats[2] & MMR_SGNL_QUAL; /* SNR of beacon */
+ wavepoint_history *wavepoint=NULL; /* WavePoint table entry */
+ net_local *lp = netdev_priv(dev); /* Device info */
+
+#ifdef I_NEED_THIS_FEATURE
+ /* Some people don't need this, some other may need it */
+ nwid=nwid^ntohs(beacon->domain_id);
+#endif
+
+#if WAVELAN_ROAMING_DEBUG > 1
+ printk(KERN_DEBUG "WaveLAN: beacon, dev %s:\n",dev->name);
+ printk(KERN_DEBUG "Domain: %.4X NWID: %.4X SigQual=%d\n",ntohs(beacon->domain_id),nwid,sigqual);
+#endif
+
+ lp->wavepoint_table.locked=1; /* <Mutex> */
+
+ wavepoint=wl_roam_check(nwid,lp); /* Find WavePoint table entry */
+ if(wavepoint==NULL) /* If no entry, Create a new one... */
+ {
+ wavepoint=wl_new_wavepoint(nwid,beacon->seq,lp);
+ if(wavepoint==NULL)
+ goto out;
+ }
+ if(lp->curr_point==NULL) /* If this is the only WavePoint, */
+ wv_roam_handover(wavepoint, lp); /* Jump on it! */
+
+ wl_update_history(wavepoint, sigqual, beacon->seq); /* Update SNR history
+ stats. */
+
+ if(lp->curr_point->average_slow < SEARCH_THRESH_LOW) /* If our current */
+ if(!lp->cell_search) /* WavePoint is getting faint, */
+ wv_nwid_filter(NWID_PROMISC,lp); /* start looking for a new one */
+
+ if(wavepoint->average_slow >
+ lp->curr_point->average_slow + WAVELAN_ROAMING_DELTA)
+ wv_roam_handover(wavepoint, lp); /* Handover to a better WavePoint */
+
+ if(lp->curr_point->average_slow > SEARCH_THRESH_HIGH) /* If our SNR is */
+ if(lp->cell_search) /* getting better, drop out of cell search mode */
+ wv_nwid_filter(!NWID_PROMISC,lp);
+
+out:
+ lp->wavepoint_table.locked=0; /* </MUTEX> :-) */
+}
+
+/* Test this MAC frame a WavePoint beacon */
+static inline int WAVELAN_BEACON(unsigned char *data)
+{
+ wavepoint_beacon *beacon= (wavepoint_beacon *)data;
+ static wavepoint_beacon beacon_template={0xaa,0xaa,0x03,0x08,0x00,0x0e,0x20,0x03,0x00};
+
+ if(memcmp(beacon,&beacon_template,9)==0)
+ return 1;
+ else
+ return 0;
+}
+#endif /* WAVELAN_ROAMING */
+
+/************************ I82593 SUBROUTINES *************************/
+/*
+ * Useful subroutines to manage the Ethernet controller
+ */
+
+/*------------------------------------------------------------------*/
+/*
+ * Routine to synchronously send a command to the i82593 chip.
+ * Should be called with interrupts disabled.
+ * (called by wv_packet_write(), wv_ru_stop(), wv_ru_start(),
+ * wv_82593_config() & wv_diag())
+ */
+static int
+wv_82593_cmd(struct net_device * dev,
+ char * str,
+ int cmd,
+ int result)
+{
+ kio_addr_t base = dev->base_addr;
+ int status;
+ int wait_completed;
+ long spin;
+
+ /* Spin until the chip finishes executing its current command (if any) */
+ spin = 1000;
+ do
+ {
+ /* Time calibration of the loop */
+ udelay(10);
+
+ /* Read the interrupt register */
+ outb(OP0_NOP | CR0_STATUS_3, LCCR(base));
+ status = inb(LCSR(base));
+ }
+ while(((status & SR3_EXEC_STATE_MASK) != SR3_EXEC_IDLE) && (spin-- > 0));
+
+ /* If the interrupt hasn't be posted */
+ if(spin <= 0)
+ {
+#ifdef DEBUG_INTERRUPT_ERROR
+ printk(KERN_INFO "wv_82593_cmd: %s timeout (previous command), status 0x%02x\n",
+ str, status);
+#endif
+ return(FALSE);
+ }
+
+ /* Issue the command to the controller */
+ outb(cmd, LCCR(base));
+
+ /* If we don't have to check the result of the command
+ * Note : this mean that the irq handler will deal with that */
+ if(result == SR0_NO_RESULT)
+ return(TRUE);
+
+ /* We are waiting for command completion */
+ wait_completed = TRUE;
+
+ /* Busy wait while the LAN controller executes the command. */
+ spin = 1000;
+ do
+ {
+ /* Time calibration of the loop */
+ udelay(10);
+
+ /* Read the interrupt register */
+ outb(CR0_STATUS_0 | OP0_NOP, LCCR(base));
+ status = inb(LCSR(base));
+
+ /* Check if there was an interrupt posted */
+ if((status & SR0_INTERRUPT))
+ {
+ /* Acknowledge the interrupt */
+ outb(CR0_INT_ACK | OP0_NOP, LCCR(base));
+
+ /* Check if interrupt is a command completion */
+ if(((status & SR0_BOTH_RX_TX) != SR0_BOTH_RX_TX) &&
+ ((status & SR0_BOTH_RX_TX) != 0x0) &&
+ !(status & SR0_RECEPTION))
+ {
+ /* Signal command completion */
+ wait_completed = FALSE;
+ }
+ else
+ {
+ /* Note : Rx interrupts will be handled later, because we can
+ * handle multiple Rx packets at once */
+#ifdef DEBUG_INTERRUPT_INFO
+ printk(KERN_INFO "wv_82593_cmd: not our interrupt\n");
+#endif
+ }
+ }
+ }
+ while(wait_completed && (spin-- > 0));
+
+ /* If the interrupt hasn't be posted */
+ if(wait_completed)
+ {
+#ifdef DEBUG_INTERRUPT_ERROR
+ printk(KERN_INFO "wv_82593_cmd: %s timeout, status 0x%02x\n",
+ str, status);
+#endif
+ return(FALSE);
+ }
+
+ /* Check the return code returned by the card (see above) against
+ * the expected return code provided by the caller */
+ if((status & SR0_EVENT_MASK) != result)
+ {
+#ifdef DEBUG_INTERRUPT_ERROR
+ printk(KERN_INFO "wv_82593_cmd: %s failed, status = 0x%x\n",
+ str, status);
+#endif
+ return(FALSE);
+ }
+
+ return(TRUE);
+} /* wv_82593_cmd */
+
+/*------------------------------------------------------------------*/
+/*
+ * This routine does a 593 op-code number 7, and obtains the diagnose
+ * status for the WaveLAN.
+ */
+static inline int
+wv_diag(struct net_device * dev)
+{
+ int ret = FALSE;
+
+ if(wv_82593_cmd(dev, "wv_diag(): diagnose",
+ OP0_DIAGNOSE, SR0_DIAGNOSE_PASSED))
+ ret = TRUE;
+
+#ifdef DEBUG_CONFIG_ERRORS
+ printk(KERN_INFO "wavelan_cs: i82593 Self Test failed!\n");
+#endif
+ return(ret);
+} /* wv_diag */
+
+/*------------------------------------------------------------------*/
+/*
+ * Routine to read len bytes from the i82593's ring buffer, starting at
+ * chip address addr. The results read from the chip are stored in buf.
+ * The return value is the address to use for next the call.
+ */
+static int
+read_ringbuf(struct net_device * dev,
+ int addr,
+ char * buf,
+ int len)
+{
+ kio_addr_t base = dev->base_addr;
+ int ring_ptr = addr;
+ int chunk_len;
+ char * buf_ptr = buf;
+
+ /* Get all the buffer */
+ while(len > 0)
+ {
+ /* Position the Program I/O Register at the ring buffer pointer */
+ outb(ring_ptr & 0xff, PIORL(base));
+ outb(((ring_ptr >> 8) & PIORH_MASK), PIORH(base));
+
+ /* First, determine how much we can read without wrapping around the
+ ring buffer */
+ if((addr + len) < (RX_BASE + RX_SIZE))
+ chunk_len = len;
+ else
+ chunk_len = RX_BASE + RX_SIZE - addr;
+ insb(PIOP(base), buf_ptr, chunk_len);
+ buf_ptr += chunk_len;
+ len -= chunk_len;
+ ring_ptr = (ring_ptr - RX_BASE + chunk_len) % RX_SIZE + RX_BASE;
+ }
+ return(ring_ptr);
+} /* read_ringbuf */
+
+/*------------------------------------------------------------------*/
+/*
+ * Reconfigure the i82593, or at least ask for it...
+ * Because wv_82593_config use the transmission buffer, we must do it
+ * when we are sure that there is no transmission, so we do it now
+ * or in wavelan_packet_xmit() (I can't find any better place,
+ * wavelan_interrupt is not an option...), so you may experience
+ * some delay sometime...
+ */
+static inline void
+wv_82593_reconfig(struct net_device * dev)
+{
+ net_local * lp = netdev_priv(dev);
+ dev_link_t * link = lp->link;
+ unsigned long flags;
+
+ /* Arm the flag, will be cleard in wv_82593_config() */
+ lp->reconfig_82593 = TRUE;
+
+ /* Check if we can do it now ! */
+ if((link->open) && (netif_running(dev)) && !(netif_queue_stopped(dev)))
+ {
+ spin_lock_irqsave(&lp->spinlock, flags); /* Disable interrupts */
+ wv_82593_config(dev);
+ spin_unlock_irqrestore(&lp->spinlock, flags); /* Re-enable interrupts */
+ }
+ else
+ {
+#ifdef DEBUG_IOCTL_INFO
+ printk(KERN_DEBUG
+ "%s: wv_82593_reconfig(): delayed (state = %lX, link = %d)\n",
+ dev->name, dev->state, link->open);
+#endif
+ }
+}
+
+/********************* DEBUG & INFO SUBROUTINES *********************/
+/*
+ * This routines are used in the code to show debug informations.
+ * Most of the time, it dump the content of hardware structures...
+ */
+
+#ifdef DEBUG_PSA_SHOW
+/*------------------------------------------------------------------*/
+/*
+ * Print the formatted contents of the Parameter Storage Area.
+ */
+static void
+wv_psa_show(psa_t * p)
+{
+ printk(KERN_DEBUG "##### wavelan psa contents: #####\n");
+ printk(KERN_DEBUG "psa_io_base_addr_1: 0x%02X %02X %02X %02X\n",
+ p->psa_io_base_addr_1,
+ p->psa_io_base_addr_2,
+ p->psa_io_base_addr_3,
+ p->psa_io_base_addr_4);
+ printk(KERN_DEBUG "psa_rem_boot_addr_1: 0x%02X %02X %02X\n",
+ p->psa_rem_boot_addr_1,
+ p->psa_rem_boot_addr_2,
+ p->psa_rem_boot_addr_3);
+ printk(KERN_DEBUG "psa_holi_params: 0x%02x, ", p->psa_holi_params);
+ printk("psa_int_req_no: %d\n", p->psa_int_req_no);
+#ifdef DEBUG_SHOW_UNUSED
+ printk(KERN_DEBUG "psa_unused0[]: %02X:%02X:%02X:%02X:%02X:%02X:%02X\n",
+ p->psa_unused0[0],
+ p->psa_unused0[1],
+ p->psa_unused0[2],
+ p->psa_unused0[3],
+ p->psa_unused0[4],
+ p->psa_unused0[5],
+ p->psa_unused0[6]);
+#endif /* DEBUG_SHOW_UNUSED */
+ printk(KERN_DEBUG "psa_univ_mac_addr[]: %02x:%02x:%02x:%02x:%02x:%02x\n",
+ p->psa_univ_mac_addr[0],
+ p->psa_univ_mac_addr[1],
+ p->psa_univ_mac_addr[2],
+ p->psa_univ_mac_addr[3],
+ p->psa_univ_mac_addr[4],
+ p->psa_univ_mac_addr[5]);
+ printk(KERN_DEBUG "psa_local_mac_addr[]: %02x:%02x:%02x:%02x:%02x:%02x\n",
+ p->psa_local_mac_addr[0],
+ p->psa_local_mac_addr[1],
+ p->psa_local_mac_addr[2],
+ p->psa_local_mac_addr[3],
+ p->psa_local_mac_addr[4],
+ p->psa_local_mac_addr[5]);
+ printk(KERN_DEBUG "psa_univ_local_sel: %d, ", p->psa_univ_local_sel);
+ printk("psa_comp_number: %d, ", p->psa_comp_number);
+ printk("psa_thr_pre_set: 0x%02x\n", p->psa_thr_pre_set);
+ printk(KERN_DEBUG "psa_feature_select/decay_prm: 0x%02x, ",
+ p->psa_feature_select);
+ printk("psa_subband/decay_update_prm: %d\n", p->psa_subband);
+ printk(KERN_DEBUG "psa_quality_thr: 0x%02x, ", p->psa_quality_thr);
+ printk("psa_mod_delay: 0x%02x\n", p->psa_mod_delay);
+ printk(KERN_DEBUG "psa_nwid: 0x%02x%02x, ", p->psa_nwid[0], p->psa_nwid[1]);
+ printk("psa_nwid_select: %d\n", p->psa_nwid_select);
+ printk(KERN_DEBUG "psa_encryption_select: %d, ", p->psa_encryption_select);
+ printk("psa_encryption_key[]: %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x\n",
+ p->psa_encryption_key[0],
+ p->psa_encryption_key[1],
+ p->psa_encryption_key[2],
+ p->psa_encryption_key[3],
+ p->psa_encryption_key[4],
+ p->psa_encryption_key[5],
+ p->psa_encryption_key[6],
+ p->psa_encryption_key[7]);
+ printk(KERN_DEBUG "psa_databus_width: %d\n", p->psa_databus_width);
+ printk(KERN_DEBUG "psa_call_code/auto_squelch: 0x%02x, ",
+ p->psa_call_code[0]);
+ printk("psa_call_code[]: %02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X\n",
+ p->psa_call_code[0],
+ p->psa_call_code[1],
+ p->psa_call_code[2],
+ p->psa_call_code[3],
+ p->psa_call_code[4],
+ p->psa_call_code[5],
+ p->psa_call_code[6],
+ p->psa_call_code[7]);
+#ifdef DEBUG_SHOW_UNUSED
+ printk(KERN_DEBUG "psa_reserved[]: %02X:%02X:%02X:%02X\n",
+ p->psa_reserved[0],
+ p->psa_reserved[1],
+ p->psa_reserved[2],
+ p->psa_reserved[3]);
+#endif /* DEBUG_SHOW_UNUSED */
+ printk(KERN_DEBUG "psa_conf_status: %d, ", p->psa_conf_status);
+ printk("psa_crc: 0x%02x%02x, ", p->psa_crc[0], p->psa_crc[1]);
+ printk("psa_crc_status: 0x%02x\n", p->psa_crc_status);
+} /* wv_psa_show */
+#endif /* DEBUG_PSA_SHOW */
+
+#ifdef DEBUG_MMC_SHOW
+/*------------------------------------------------------------------*/
+/*
+ * Print the formatted status of the Modem Management Controller.
+ * This function need to be completed...
+ */
+static void
+wv_mmc_show(struct net_device * dev)
+{
+ kio_addr_t base = dev->base_addr;
+ net_local * lp = netdev_priv(dev);
+ mmr_t m;
+
+ /* Basic check */
+ if(hasr_read(base) & HASR_NO_CLK)
+ {
+ printk(KERN_WARNING "%s: wv_mmc_show: modem not connected\n",
+ dev->name);
+ return;
+ }
+
+ spin_lock_irqsave(&lp->spinlock, flags);
+
+ /* Read the mmc */
+ mmc_out(base, mmwoff(0, mmw_freeze), 1);
+ mmc_read(base, 0, (u_char *)&m, sizeof(m));
+ mmc_out(base, mmwoff(0, mmw_freeze), 0);
+
+#ifdef WIRELESS_EXT /* If wireless extension exist in the kernel */
+ /* Don't forget to update statistics */
+ lp->wstats.discard.nwid += (m.mmr_wrong_nwid_h << 8) | m.mmr_wrong_nwid_l;
+#endif /* WIRELESS_EXT */
+
+ spin_unlock_irqrestore(&lp->spinlock, flags);
+
+ printk(KERN_DEBUG "##### wavelan modem status registers: #####\n");
+#ifdef DEBUG_SHOW_UNUSED
+ printk(KERN_DEBUG "mmc_unused0[]: %02X:%02X:%02X:%02X:%02X:%02X:%02X:%02X\n",
+ m.mmr_unused0[0],
+ m.mmr_unused0[1],
+ m.mmr_unused0[2],
+ m.mmr_unused0[3],
+ m.mmr_unused0[4],
+ m.mmr_unused0[5],
+ m.mmr_unused0[6],
+ m.mmr_unused0[7]);
+#endif /* DEBUG_SHOW_UNUSED */
+ printk(KERN_DEBUG "Encryption algorythm: %02X - Status: %02X\n",
+ m.mmr_des_avail, m.mmr_des_status);
+#ifdef DEBUG_SHOW_UNUSED
+ printk(KERN_DEBUG "mmc_unused1[]: %02X:%02X:%02X:%02X:%02X\n",
+ m.mmr_unused1[0],
+ m.mmr_unused1[1],
+ m.mmr_unused1[2],
+ m.mmr_unused1[3],
+ m.mmr_unused1[4]);
+#endif /* DEBUG_SHOW_UNUSED */
+ printk(KERN_DEBUG "dce_status: 0x%x [%s%s%s%s]\n",
+ m.mmr_dce_status,
+ (m.mmr_dce_status & MMR_DCE_STATUS_RX_BUSY) ? "energy detected,":"",
+ (m.mmr_dce_status & MMR_DCE_STATUS_LOOPT_IND) ?
+ "loop test indicated," : "",
+ (m.mmr_dce_status & MMR_DCE_STATUS_TX_BUSY) ? "transmitter on," : "",
+ (m.mmr_dce_status & MMR_DCE_STATUS_JBR_EXPIRED) ?
+ "jabber timer expired," : "");
+ printk(KERN_DEBUG "Dsp ID: %02X\n",
+ m.mmr_dsp_id);
+#ifdef DEBUG_SHOW_UNUSED
+ printk(KERN_DEBUG "mmc_unused2[]: %02X:%02X\n",
+ m.mmr_unused2[0],
+ m.mmr_unused2[1]);
+#endif /* DEBUG_SHOW_UNUSED */
+ printk(KERN_DEBUG "# correct_nwid: %d, # wrong_nwid: %d\n",
+ (m.mmr_correct_nwid_h << 8) | m.mmr_correct_nwid_l,
+ (m.mmr_wrong_nwid_h << 8) | m.mmr_wrong_nwid_l);
+ printk(KERN_DEBUG "thr_pre_set: 0x%x [current signal %s]\n",
+ m.mmr_thr_pre_set & MMR_THR_PRE_SET,
+ (m.mmr_thr_pre_set & MMR_THR_PRE_SET_CUR) ? "above" : "below");
+ printk(KERN_DEBUG "signal_lvl: %d [%s], ",
+ m.mmr_signal_lvl & MMR_SIGNAL_LVL,
+ (m.mmr_signal_lvl & MMR_SIGNAL_LVL_VALID) ? "new msg" : "no new msg");
+ printk("silence_lvl: %d [%s], ", m.mmr_silence_lvl & MMR_SILENCE_LVL,
+ (m.mmr_silence_lvl & MMR_SILENCE_LVL_VALID) ? "update done" : "no new update");
+ printk("sgnl_qual: 0x%x [%s]\n", m.mmr_sgnl_qual & MMR_SGNL_QUAL,
+ (m.mmr_sgnl_qual & MMR_SGNL_QUAL_ANT) ? "Antenna 1" : "Antenna 0");
+#ifdef DEBUG_SHOW_UNUSED
+ printk(KERN_DEBUG "netw_id_l: %x\n", m.mmr_netw_id_l);
+#endif /* DEBUG_SHOW_UNUSED */
+} /* wv_mmc_show */
+#endif /* DEBUG_MMC_SHOW */
+
+#ifdef DEBUG_I82593_SHOW
+/*------------------------------------------------------------------*/
+/*
+ * Print the formatted status of the i82593's receive unit.
+ */
+static void
+wv_ru_show(struct net_device * dev)
+{
+ net_local *lp = netdev_priv(dev);
+
+ printk(KERN_DEBUG "##### wavelan i82593 receiver status: #####\n");
+ printk(KERN_DEBUG "ru: rfp %d stop %d", lp->rfp, lp->stop);
+ /*
+ * Not implemented yet...
+ */
+ printk("\n");
+} /* wv_ru_show */
+#endif /* DEBUG_I82593_SHOW */
+
+#ifdef DEBUG_DEVICE_SHOW
+/*------------------------------------------------------------------*/
+/*
+ * Print the formatted status of the WaveLAN PCMCIA device driver.
+ */
+static void
+wv_dev_show(struct net_device * dev)
+{
+ printk(KERN_DEBUG "dev:");
+ printk(" state=%lX,", dev->state);
+ printk(" trans_start=%ld,", dev->trans_start);
+ printk(" flags=0x%x,", dev->flags);
+ printk("\n");
+} /* wv_dev_show */
+
+/*------------------------------------------------------------------*/
+/*
+ * Print the formatted status of the WaveLAN PCMCIA device driver's
+ * private information.
+ */
+static void
+wv_local_show(struct net_device * dev)
+{
+ net_local *lp = netdev_priv(dev);
+
+ printk(KERN_DEBUG "local:");
+ /*
+ * Not implemented yet...
+ */
+ printk("\n");
+} /* wv_local_show */
+#endif /* DEBUG_DEVICE_SHOW */
+
+#if defined(DEBUG_RX_INFO) || defined(DEBUG_TX_INFO)
+/*------------------------------------------------------------------*/
+/*
+ * Dump packet header (and content if necessary) on the screen
+ */
+static inline void
+wv_packet_info(u_char * p, /* Packet to dump */
+ int length, /* Length of the packet */
+ char * msg1, /* Name of the device */
+ char * msg2) /* Name of the function */
+{
+ int i;
+ int maxi;
+
+ printk(KERN_DEBUG "%s: %s(): dest %02X:%02X:%02X:%02X:%02X:%02X, length %d\n",
+ msg1, msg2, p[0], p[1], p[2], p[3], p[4], p[5], length);
+ printk(KERN_DEBUG "%s: %s(): src %02X:%02X:%02X:%02X:%02X:%02X, type 0x%02X%02X\n",
+ msg1, msg2, p[6], p[7], p[8], p[9], p[10], p[11], p[12], p[13]);
+
+#ifdef DEBUG_PACKET_DUMP
+
+ printk(KERN_DEBUG "data=\"");
+
+ if((maxi = length) > DEBUG_PACKET_DUMP)
+ maxi = DEBUG_PACKET_DUMP;
+ for(i = 14; i < maxi; i++)
+ if(p[i] >= ' ' && p[i] <= '~')
+ printk(" %c", p[i]);
+ else
+ printk("%02X", p[i]);
+ if(maxi < length)
+ printk("..");
+ printk("\"\n");
+ printk(KERN_DEBUG "\n");
+#endif /* DEBUG_PACKET_DUMP */
+}
+#endif /* defined(DEBUG_RX_INFO) || defined(DEBUG_TX_INFO) */
+
+/*------------------------------------------------------------------*/
+/*
+ * This is the information which is displayed by the driver at startup
+ * There is a lot of flag to configure it at your will...
+ */
+static inline void
+wv_init_info(struct net_device * dev)
+{
+ kio_addr_t base = dev->base_addr;
+ psa_t psa;
+ int i;
+
+ /* Read the parameter storage area */
+ psa_read(dev, 0, (unsigned char *) &psa, sizeof(psa));
+
+#ifdef DEBUG_PSA_SHOW
+ wv_psa_show(&psa);
+#endif
+#ifdef DEBUG_MMC_SHOW
+ wv_mmc_show(dev);
+#endif
+#ifdef DEBUG_I82593_SHOW
+ wv_ru_show(dev);
+#endif
+
+#ifdef DEBUG_BASIC_SHOW
+ /* Now, let's go for the basic stuff */
+ printk(KERN_NOTICE "%s: WaveLAN: port %#lx, irq %d, hw_addr",
+ dev->name, base, dev->irq);
+ for(i = 0; i < WAVELAN_ADDR_SIZE; i++)
+ printk("%s%02X", (i == 0) ? " " : ":", dev->dev_addr[i]);
+
+ /* Print current network id */
+ if(psa.psa_nwid_select)
+ printk(", nwid 0x%02X-%02X", psa.psa_nwid[0], psa.psa_nwid[1]);
+ else
+ printk(", nwid off");
+
+ /* If 2.00 card */
+ if(!(mmc_in(base, mmroff(0, mmr_fee_status)) &
+ (MMR_FEE_STATUS_DWLD | MMR_FEE_STATUS_BUSY)))
+ {
+ unsigned short freq;
+
+ /* Ask the EEprom to read the frequency from the first area */
+ fee_read(base, 0x00 /* 1st area - frequency... */,
+ &freq, 1);
+
+ /* Print frequency */
+ printk(", 2.00, %ld", (freq >> 6) + 2400L);
+
+ /* Hack !!! */
+ if(freq & 0x20)
+ printk(".5");
+ }
+ else
+ {
+ printk(", PCMCIA, ");
+ switch (psa.psa_subband)
+ {
+ case PSA_SUBBAND_915:
+ printk("915");
+ break;
+ case PSA_SUBBAND_2425:
+ printk("2425");
+ break;
+ case PSA_SUBBAND_2460:
+ printk("2460");
+ break;
+ case PSA_SUBBAND_2484:
+ printk("2484");
+ break;
+ case PSA_SUBBAND_2430_5:
+ printk("2430.5");
+ break;
+ default:
+ printk("unknown");
+ }
+ }
+
+ printk(" MHz\n");
+#endif /* DEBUG_BASIC_SHOW */
+
+#ifdef DEBUG_VERSION_SHOW
+ /* Print version information */
+ printk(KERN_NOTICE "%s", version);
+#endif
+} /* wv_init_info */
+
+/********************* IOCTL, STATS & RECONFIG *********************/
+/*
+ * We found here routines that are called by Linux on differents
+ * occasions after the configuration and not for transmitting data
+ * These may be called when the user use ifconfig, /proc/net/dev
+ * or wireless extensions
+ */
+
+/*------------------------------------------------------------------*/
+/*
+ * Get the current ethernet statistics. This may be called with the
+ * card open or closed.
+ * Used when the user read /proc/net/dev
+ */
+static en_stats *
+wavelan_get_stats(struct net_device * dev)
+{
+#ifdef DEBUG_IOCTL_TRACE
+ printk(KERN_DEBUG "%s: <>wavelan_get_stats()\n", dev->name);
+#endif
+
+ return(&((net_local *)netdev_priv(dev))->stats);
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Set or clear the multicast filter for this adaptor.
+ * num_addrs == -1 Promiscuous mode, receive all packets
+ * num_addrs == 0 Normal mode, clear multicast list
+ * num_addrs > 0 Multicast mode, receive normal and MC packets,
+ * and do best-effort filtering.
+ */
+
+static void
+wavelan_set_multicast_list(struct net_device * dev)
+{
+ net_local * lp = netdev_priv(dev);
+
+#ifdef DEBUG_IOCTL_TRACE
+ printk(KERN_DEBUG "%s: ->wavelan_set_multicast_list()\n", dev->name);
+#endif
+
+#ifdef DEBUG_IOCTL_INFO
+ printk(KERN_DEBUG "%s: wavelan_set_multicast_list(): setting Rx mode %02X to %d addresses.\n",
+ dev->name, dev->flags, dev->mc_count);
+#endif
+
+ if(dev->flags & IFF_PROMISC)
+ {
+ /*
+ * Enable promiscuous mode: receive all packets.
+ */
+ if(!lp->promiscuous)
+ {
+ lp->promiscuous = 1;
+ lp->allmulticast = 0;
+ lp->mc_count = 0;
+
+ wv_82593_reconfig(dev);
+
+ /* Tell the kernel that we are doing a really bad job... */
+ dev->flags |= IFF_PROMISC;
+ }
+ }
+ else
+ /* If all multicast addresses
+ * or too much multicast addresses for the hardware filter */
+ if((dev->flags & IFF_ALLMULTI) ||
+ (dev->mc_count > I82593_MAX_MULTICAST_ADDRESSES))
+ {
+ /*
+ * Disable promiscuous mode, but active the all multicast mode
+ */
+ if(!lp->allmulticast)
+ {
+ lp->promiscuous = 0;
+ lp->allmulticast = 1;
+ lp->mc_count = 0;
+
+ wv_82593_reconfig(dev);
+
+ /* Tell the kernel that we are doing a really bad job... */
+ dev->flags |= IFF_ALLMULTI;
+ }
+ }
+ else
+ /* If there is some multicast addresses to send */
+ if(dev->mc_list != (struct dev_mc_list *) NULL)
+ {
+ /*
+ * Disable promiscuous mode, but receive all packets
+ * in multicast list
+ */
+#ifdef MULTICAST_AVOID
+ if(lp->promiscuous || lp->allmulticast ||
+ (dev->mc_count != lp->mc_count))
+#endif
+ {
+ lp->promiscuous = 0;
+ lp->allmulticast = 0;
+ lp->mc_count = dev->mc_count;
+
+ wv_82593_reconfig(dev);
+ }
+ }
+ else
+ {
+ /*
+ * Switch to normal mode: disable promiscuous mode and
+ * clear the multicast list.
+ */
+ if(lp->promiscuous || lp->mc_count == 0)
+ {
+ lp->promiscuous = 0;
+ lp->allmulticast = 0;
+ lp->mc_count = 0;
+
+ wv_82593_reconfig(dev);
+ }
+ }
+#ifdef DEBUG_IOCTL_TRACE
+ printk(KERN_DEBUG "%s: <-wavelan_set_multicast_list()\n", dev->name);
+#endif
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * This function doesn't exist...
+ * (Note : it was a nice way to test the reconfigure stuff...)
+ */
+#ifdef SET_MAC_ADDRESS
+static int
+wavelan_set_mac_address(struct net_device * dev,
+ void * addr)
+{
+ struct sockaddr * mac = addr;
+
+ /* Copy the address */
+ memcpy(dev->dev_addr, mac->sa_data, WAVELAN_ADDR_SIZE);
+
+ /* Reconfig the beast */
+ wv_82593_reconfig(dev);
+
+ return 0;
+}
+#endif /* SET_MAC_ADDRESS */
+
+#ifdef WIRELESS_EXT /* If wireless extension exist in the kernel */
+
+/*------------------------------------------------------------------*/
+/*
+ * Frequency setting (for hardware able of it)
+ * It's a bit complicated and you don't really want to look into it...
+ */
+static inline int
+wv_set_frequency(u_long base, /* i/o port of the card */
+ iw_freq * frequency)
+{
+ const int BAND_NUM = 10; /* Number of bands */
+ long freq = 0L; /* offset to 2.4 GHz in .5 MHz */
+#ifdef DEBUG_IOCTL_INFO
+ int i;
+#endif
+
+ /* Setting by frequency */
+ /* Theoritically, you may set any frequency between
+ * the two limits with a 0.5 MHz precision. In practice,
+ * I don't want you to have trouble with local
+ * regulations... */
+ if((frequency->e == 1) &&
+ (frequency->m >= (int) 2.412e8) && (frequency->m <= (int) 2.487e8))
+ {
+ freq = ((frequency->m / 10000) - 24000L) / 5;
+ }
+
+ /* Setting by channel (same as wfreqsel) */
+ /* Warning : each channel is 22MHz wide, so some of the channels
+ * will interfere... */
+ if((frequency->e == 0) &&
+ (frequency->m >= 0) && (frequency->m < BAND_NUM))
+ {
+ /* Get frequency offset. */
+ freq = channel_bands[frequency->m] >> 1;
+ }
+
+ /* Verify if the frequency is allowed */
+ if(freq != 0L)
+ {
+ u_short table[10]; /* Authorized frequency table */
+
+ /* Read the frequency table */
+ fee_read(base, 0x71 /* frequency table */,
+ table, 10);
+
+#ifdef DEBUG_IOCTL_INFO
+ printk(KERN_DEBUG "Frequency table :");
+ for(i = 0; i < 10; i++)
+ {
+ printk(" %04X",
+ table[i]);
+ }
+ printk("\n");
+#endif
+
+ /* Look in the table if the frequency is allowed */
+ if(!(table[9 - ((freq - 24) / 16)] &
+ (1 << ((freq - 24) % 16))))
+ return -EINVAL; /* not allowed */
+ }
+ else
+ return -EINVAL;
+
+ /* If we get a usable frequency */
+ if(freq != 0L)
+ {
+ unsigned short area[16];
+ unsigned short dac[2];
+ unsigned short area_verify[16];
+ unsigned short dac_verify[2];
+ /* Corresponding gain (in the power adjust value table)
+ * see AT&T Wavelan Data Manual, REF 407-024689/E, page 3-8
+ * & WCIN062D.DOC, page 6.2.9 */
+ unsigned short power_limit[] = { 40, 80, 120, 160, 0 };
+ int power_band = 0; /* Selected band */
+ unsigned short power_adjust; /* Correct value */
+
+ /* Search for the gain */
+ power_band = 0;
+ while((freq > power_limit[power_band]) &&
+ (power_limit[++power_band] != 0))
+ ;
+
+ /* Read the first area */
+ fee_read(base, 0x00,
+ area, 16);
+
+ /* Read the DAC */
+ fee_read(base, 0x60,
+ dac, 2);
+
+ /* Read the new power adjust value */
+ fee_read(base, 0x6B - (power_band >> 1),
+ &power_adjust, 1);
+ if(power_band & 0x1)
+ power_adjust >>= 8;
+ else
+ power_adjust &= 0xFF;
+
+#ifdef DEBUG_IOCTL_INFO
+ printk(KERN_DEBUG "Wavelan EEprom Area 1 :");
+ for(i = 0; i < 16; i++)
+ {
+ printk(" %04X",
+ area[i]);
+ }
+ printk("\n");
+
+ printk(KERN_DEBUG "Wavelan EEprom DAC : %04X %04X\n",
+ dac[0], dac[1]);
+#endif
+
+ /* Frequency offset (for info only...) */
+ area[0] = ((freq << 5) & 0xFFE0) | (area[0] & 0x1F);
+
+ /* Receiver Principle main divider coefficient */
+ area[3] = (freq >> 1) + 2400L - 352L;
+ area[2] = ((freq & 0x1) << 4) | (area[2] & 0xFFEF);
+
+ /* Transmitter Main divider coefficient */
+ area[13] = (freq >> 1) + 2400L;
+ area[12] = ((freq & 0x1) << 4) | (area[2] & 0xFFEF);
+
+ /* Others part of the area are flags, bit streams or unused... */
+
+ /* Set the value in the DAC */
+ dac[1] = ((power_adjust >> 1) & 0x7F) | (dac[1] & 0xFF80);
+ dac[0] = ((power_adjust & 0x1) << 4) | (dac[0] & 0xFFEF);
+
+ /* Write the first area */
+ fee_write(base, 0x00,
+ area, 16);
+
+ /* Write the DAC */
+ fee_write(base, 0x60,
+ dac, 2);
+
+ /* We now should verify here that the EEprom writting was ok */
+
+ /* ReRead the first area */
+ fee_read(base, 0x00,
+ area_verify, 16);
+
+ /* ReRead the DAC */
+ fee_read(base, 0x60,
+ dac_verify, 2);
+
+ /* Compare */
+ if(memcmp(area, area_verify, 16 * 2) ||
+ memcmp(dac, dac_verify, 2 * 2))
+ {
+#ifdef DEBUG_IOCTL_ERROR
+ printk(KERN_INFO "Wavelan: wv_set_frequency : unable to write new frequency to EEprom (?)\n");
+#endif
+ return -EOPNOTSUPP;
+ }
+
+ /* We must download the frequency parameters to the
+ * synthetisers (from the EEprom - area 1)
+ * Note : as the EEprom is auto decremented, we set the end
+ * if the area... */
+ mmc_out(base, mmwoff(0, mmw_fee_addr), 0x0F);
+ mmc_out(base, mmwoff(0, mmw_fee_ctrl),
+ MMW_FEE_CTRL_READ | MMW_FEE_CTRL_DWLD);
+
+ /* Wait until the download is finished */
+ fee_wait(base, 100, 100);
+
+ /* We must now download the power adjust value (gain) to
+ * the synthetisers (from the EEprom - area 7 - DAC) */
+ mmc_out(base, mmwoff(0, mmw_fee_addr), 0x61);
+ mmc_out(base, mmwoff(0, mmw_fee_ctrl),
+ MMW_FEE_CTRL_READ | MMW_FEE_CTRL_DWLD);
+
+ /* Wait until the download is finished */
+ fee_wait(base, 100, 100);
+
+#ifdef DEBUG_IOCTL_INFO
+ /* Verification of what we have done... */
+
+ printk(KERN_DEBUG "Wavelan EEprom Area 1 :");
+ for(i = 0; i < 16; i++)
+ {
+ printk(" %04X",
+ area_verify[i]);
+ }
+ printk("\n");
+
+ printk(KERN_DEBUG "Wavelan EEprom DAC : %04X %04X\n",
+ dac_verify[0], dac_verify[1]);
+#endif
+
+ return 0;
+ }
+ else
+ return -EINVAL; /* Bah, never get there... */
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Give the list of available frequencies
+ */
+static inline int
+wv_frequency_list(u_long base, /* i/o port of the card */
+ iw_freq * list, /* List of frequency to fill */
+ int max) /* Maximum number of frequencies */
+{
+ u_short table[10]; /* Authorized frequency table */
+ long freq = 0L; /* offset to 2.4 GHz in .5 MHz + 12 MHz */
+ int i; /* index in the table */
+ const int BAND_NUM = 10; /* Number of bands */
+ int c = 0; /* Channel number */
+
+ /* Read the frequency table */
+ fee_read(base, 0x71 /* frequency table */,
+ table, 10);
+
+ /* Look all frequencies */
+ i = 0;
+ for(freq = 0; freq < 150; freq++)
+ /* Look in the table if the frequency is allowed */
+ if(table[9 - (freq / 16)] & (1 << (freq % 16)))
+ {
+ /* Compute approximate channel number */
+ while((((channel_bands[c] >> 1) - 24) < freq) &&
+ (c < BAND_NUM))
+ c++;
+ list[i].i = c; /* Set the list index */
+
+ /* put in the list */
+ list[i].m = (((freq + 24) * 5) + 24000L) * 10000;
+ list[i++].e = 1;
+
+ /* Check number */
+ if(i >= max)
+ return(i);
+ }
+
+ return(i);
+}
+
+#ifdef IW_WIRELESS_SPY
+/*------------------------------------------------------------------*/
+/*
+ * Gather wireless spy statistics : for each packet, compare the source
+ * address with out list, and if match, get the stats...
+ * Sorry, but this function really need wireless extensions...
+ */
+static inline void
+wl_spy_gather(struct net_device * dev,
+ u_char * mac, /* MAC address */
+ u_char * stats) /* Statistics to gather */
+{
+ struct iw_quality wstats;
+
+ wstats.qual = stats[2] & MMR_SGNL_QUAL;
+ wstats.level = stats[0] & MMR_SIGNAL_LVL;
+ wstats.noise = stats[1] & MMR_SILENCE_LVL;
+ wstats.updated = 0x7;
+
+ /* Update spy records */
+ wireless_spy_update(dev, mac, &wstats);
+}
+#endif /* IW_WIRELESS_SPY */
+
+#ifdef HISTOGRAM
+/*------------------------------------------------------------------*/
+/*
+ * This function calculate an histogram on the signal level.
+ * As the noise is quite constant, it's like doing it on the SNR.
+ * We have defined a set of interval (lp->his_range), and each time
+ * the level goes in that interval, we increment the count (lp->his_sum).
+ * With this histogram you may detect if one wavelan is really weak,
+ * or you may also calculate the mean and standard deviation of the level...
+ */
+static inline void
+wl_his_gather(struct net_device * dev,
+ u_char * stats) /* Statistics to gather */
+{
+ net_local * lp = netdev_priv(dev);
+ u_char level = stats[0] & MMR_SIGNAL_LVL;
+ int i;
+
+ /* Find the correct interval */
+ i = 0;
+ while((i < (lp->his_number - 1)) && (level >= lp->his_range[i++]))
+ ;
+
+ /* Increment interval counter */
+ (lp->his_sum[i])++;
+}
+#endif /* HISTOGRAM */
+
+static void wl_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
+{
+ strncpy(info->driver, "wavelan_cs", sizeof(info->driver)-1);
+}
+
+static struct ethtool_ops ops = {
+ .get_drvinfo = wl_get_drvinfo
+};
+
+/*------------------------------------------------------------------*/
+/*
+ * Wireless Handler : get protocol name
+ */
+static int wavelan_get_name(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *extra)
+{
+ strcpy(wrqu->name, "WaveLAN");
+ return 0;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Wireless Handler : set NWID
+ */
+static int wavelan_set_nwid(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *extra)
+{
+ kio_addr_t base = dev->base_addr;
+ net_local *lp = netdev_priv(dev);
+ psa_t psa;
+ mm_t m;
+ unsigned long flags;
+ int ret = 0;
+
+ /* Disable interrupts and save flags. */
+ spin_lock_irqsave(&lp->spinlock, flags);
+
+ /* Set NWID in WaveLAN. */
+ if (!wrqu->nwid.disabled) {
+ /* Set NWID in psa */
+ psa.psa_nwid[0] = (wrqu->nwid.value & 0xFF00) >> 8;
+ psa.psa_nwid[1] = wrqu->nwid.value & 0xFF;
+ psa.psa_nwid_select = 0x01;
+ psa_write(dev,
+ (char *) psa.psa_nwid - (char *) &psa,
+ (unsigned char *) psa.psa_nwid, 3);
+
+ /* Set NWID in mmc. */
+ m.w.mmw_netw_id_l = psa.psa_nwid[1];
+ m.w.mmw_netw_id_h = psa.psa_nwid[0];
+ mmc_write(base,
+ (char *) &m.w.mmw_netw_id_l -
+ (char *) &m,
+ (unsigned char *) &m.w.mmw_netw_id_l, 2);
+ mmc_out(base, mmwoff(0, mmw_loopt_sel), 0x00);
+ } else {
+ /* Disable NWID in the psa. */
+ psa.psa_nwid_select = 0x00;
+ psa_write(dev,
+ (char *) &psa.psa_nwid_select -
+ (char *) &psa,
+ (unsigned char *) &psa.psa_nwid_select,
+ 1);
+
+ /* Disable NWID in the mmc (no filtering). */
+ mmc_out(base, mmwoff(0, mmw_loopt_sel),
+ MMW_LOOPT_SEL_DIS_NWID);
+ }
+ /* update the Wavelan checksum */
+ update_psa_checksum(dev);
+
+ /* Enable interrupts and restore flags. */
+ spin_unlock_irqrestore(&lp->spinlock, flags);
+
+ return ret;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Wireless Handler : get NWID
+ */
+static int wavelan_get_nwid(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *extra)
+{
+ net_local *lp = netdev_priv(dev);
+ psa_t psa;
+ unsigned long flags;
+ int ret = 0;
+
+ /* Disable interrupts and save flags. */
+ spin_lock_irqsave(&lp->spinlock, flags);
+
+ /* Read the NWID. */
+ psa_read(dev,
+ (char *) psa.psa_nwid - (char *) &psa,
+ (unsigned char *) psa.psa_nwid, 3);
+ wrqu->nwid.value = (psa.psa_nwid[0] << 8) + psa.psa_nwid[1];
+ wrqu->nwid.disabled = !(psa.psa_nwid_select);
+ wrqu->nwid.fixed = 1; /* Superfluous */
+
+ /* Enable interrupts and restore flags. */
+ spin_unlock_irqrestore(&lp->spinlock, flags);
+
+ return ret;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Wireless Handler : set frequency
+ */
+static int wavelan_set_freq(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *extra)
+{
+ kio_addr_t base = dev->base_addr;
+ net_local *lp = netdev_priv(dev);
+ unsigned long flags;
+ int ret;
+
+ /* Disable interrupts and save flags. */
+ spin_lock_irqsave(&lp->spinlock, flags);
+
+ /* Attempt to recognise 2.00 cards (2.4 GHz frequency selectable). */
+ if (!(mmc_in(base, mmroff(0, mmr_fee_status)) &
+ (MMR_FEE_STATUS_DWLD | MMR_FEE_STATUS_BUSY)))
+ ret = wv_set_frequency(base, &(wrqu->freq));
+ else
+ ret = -EOPNOTSUPP;
+
+ /* Enable interrupts and restore flags. */
+ spin_unlock_irqrestore(&lp->spinlock, flags);
+
+ return ret;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Wireless Handler : get frequency
+ */
+static int wavelan_get_freq(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *extra)
+{
+ kio_addr_t base = dev->base_addr;
+ net_local *lp = netdev_priv(dev);
+ psa_t psa;
+ unsigned long flags;
+ int ret = 0;
+
+ /* Disable interrupts and save flags. */
+ spin_lock_irqsave(&lp->spinlock, flags);
+
+ /* Attempt to recognise 2.00 cards (2.4 GHz frequency selectable).
+ * Does it work for everybody, especially old cards? */
+ if (!(mmc_in(base, mmroff(0, mmr_fee_status)) &
+ (MMR_FEE_STATUS_DWLD | MMR_FEE_STATUS_BUSY))) {
+ unsigned short freq;
+
+ /* Ask the EEPROM to read the frequency from the first area. */
+ fee_read(base, 0x00, &freq, 1);
+ wrqu->freq.m = ((freq >> 5) * 5 + 24000L) * 10000;
+ wrqu->freq.e = 1;
+ } else {
+ psa_read(dev,
+ (char *) &psa.psa_subband - (char *) &psa,
+ (unsigned char *) &psa.psa_subband, 1);
+
+ if (psa.psa_subband <= 4) {
+ wrqu->freq.m = fixed_bands[psa.psa_subband];
+ wrqu->freq.e = (psa.psa_subband != 0);
+ } else
+ ret = -EOPNOTSUPP;
+ }
+
+ /* Enable interrupts and restore flags. */
+ spin_unlock_irqrestore(&lp->spinlock, flags);
+
+ return ret;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Wireless Handler : set level threshold
+ */
+static int wavelan_set_sens(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *extra)
+{
+ kio_addr_t base = dev->base_addr;
+ net_local *lp = netdev_priv(dev);
+ psa_t psa;
+ unsigned long flags;
+ int ret = 0;
+
+ /* Disable interrupts and save flags. */
+ spin_lock_irqsave(&lp->spinlock, flags);
+
+ /* Set the level threshold. */
+ /* We should complain loudly if wrqu->sens.fixed = 0, because we
+ * can't set auto mode... */
+ psa.psa_thr_pre_set = wrqu->sens.value & 0x3F;
+ psa_write(dev,
+ (char *) &psa.psa_thr_pre_set - (char *) &psa,
+ (unsigned char *) &psa.psa_thr_pre_set, 1);
+ /* update the Wavelan checksum */
+ update_psa_checksum(dev);
+ mmc_out(base, mmwoff(0, mmw_thr_pre_set),
+ psa.psa_thr_pre_set);
+
+ /* Enable interrupts and restore flags. */
+ spin_unlock_irqrestore(&lp->spinlock, flags);
+
+ return ret;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Wireless Handler : get level threshold
+ */
+static int wavelan_get_sens(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *extra)
+{
+ net_local *lp = netdev_priv(dev);
+ psa_t psa;
+ unsigned long flags;
+ int ret = 0;
+
+ /* Disable interrupts and save flags. */
+ spin_lock_irqsave(&lp->spinlock, flags);
+
+ /* Read the level threshold. */
+ psa_read(dev,
+ (char *) &psa.psa_thr_pre_set - (char *) &psa,
+ (unsigned char *) &psa.psa_thr_pre_set, 1);
+ wrqu->sens.value = psa.psa_thr_pre_set & 0x3F;
+ wrqu->sens.fixed = 1;
+
+ /* Enable interrupts and restore flags. */
+ spin_unlock_irqrestore(&lp->spinlock, flags);
+
+ return ret;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Wireless Handler : set encryption key
+ */
+static int wavelan_set_encode(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *extra)
+{
+ kio_addr_t base = dev->base_addr;
+ net_local *lp = netdev_priv(dev);
+ unsigned long flags;
+ psa_t psa;
+ int ret = 0;
+
+ /* Disable interrupts and save flags. */
+ spin_lock_irqsave(&lp->spinlock, flags);
+
+ /* Check if capable of encryption */
+ if (!mmc_encr(base)) {
+ ret = -EOPNOTSUPP;
+ }
+
+ /* Check the size of the key */
+ if((wrqu->encoding.length != 8) && (wrqu->encoding.length != 0)) {
+ ret = -EINVAL;
+ }
+
+ if(!ret) {
+ /* Basic checking... */
+ if (wrqu->encoding.length == 8) {
+ /* Copy the key in the driver */
+ memcpy(psa.psa_encryption_key, extra,
+ wrqu->encoding.length);
+ psa.psa_encryption_select = 1;
+
+ psa_write(dev,
+ (char *) &psa.psa_encryption_select -
+ (char *) &psa,
+ (unsigned char *) &psa.
+ psa_encryption_select, 8 + 1);
+
+ mmc_out(base, mmwoff(0, mmw_encr_enable),
+ MMW_ENCR_ENABLE_EN | MMW_ENCR_ENABLE_MODE);
+ mmc_write(base, mmwoff(0, mmw_encr_key),
+ (unsigned char *) &psa.
+ psa_encryption_key, 8);
+ }
+
+ /* disable encryption */
+ if (wrqu->encoding.flags & IW_ENCODE_DISABLED) {
+ psa.psa_encryption_select = 0;
+ psa_write(dev,
+ (char *) &psa.psa_encryption_select -
+ (char *) &psa,
+ (unsigned char *) &psa.
+ psa_encryption_select, 1);
+
+ mmc_out(base, mmwoff(0, mmw_encr_enable), 0);
+ }
+ /* update the Wavelan checksum */
+ update_psa_checksum(dev);
+ }
+
+ /* Enable interrupts and restore flags. */
+ spin_unlock_irqrestore(&lp->spinlock, flags);
+
+ return ret;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Wireless Handler : get encryption key
+ */
+static int wavelan_get_encode(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *extra)
+{
+ kio_addr_t base = dev->base_addr;
+ net_local *lp = netdev_priv(dev);
+ psa_t psa;
+ unsigned long flags;
+ int ret = 0;
+
+ /* Disable interrupts and save flags. */
+ spin_lock_irqsave(&lp->spinlock, flags);
+
+ /* Check if encryption is available */
+ if (!mmc_encr(base)) {
+ ret = -EOPNOTSUPP;
+ } else {
+ /* Read the encryption key */
+ psa_read(dev,
+ (char *) &psa.psa_encryption_select -
+ (char *) &psa,
+ (unsigned char *) &psa.
+ psa_encryption_select, 1 + 8);
+
+ /* encryption is enabled ? */
+ if (psa.psa_encryption_select)
+ wrqu->encoding.flags = IW_ENCODE_ENABLED;
+ else
+ wrqu->encoding.flags = IW_ENCODE_DISABLED;
+ wrqu->encoding.flags |= mmc_encr(base);
+
+ /* Copy the key to the user buffer */
+ wrqu->encoding.length = 8;
+ memcpy(extra, psa.psa_encryption_key, wrqu->encoding.length);
+ }
+
+ /* Enable interrupts and restore flags. */
+ spin_unlock_irqrestore(&lp->spinlock, flags);
+
+ return ret;
+}
+
+#ifdef WAVELAN_ROAMING_EXT
+/*------------------------------------------------------------------*/
+/*
+ * Wireless Handler : set ESSID (domain)
+ */
+static int wavelan_set_essid(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *extra)
+{
+ net_local *lp = netdev_priv(dev);
+ unsigned long flags;
+ int ret = 0;
+
+ /* Disable interrupts and save flags. */
+ spin_lock_irqsave(&lp->spinlock, flags);
+
+ /* Check if disable */
+ if(wrqu->data.flags == 0)
+ lp->filter_domains = 0;
+ else {
+ char essid[IW_ESSID_MAX_SIZE + 1];
+ char * endp;
+
+ /* Terminate the string */
+ memcpy(essid, extra, wrqu->data.length);
+ essid[IW_ESSID_MAX_SIZE] = '\0';
+
+#ifdef DEBUG_IOCTL_INFO
+ printk(KERN_DEBUG "SetEssid : ``%s''\n", essid);
+#endif /* DEBUG_IOCTL_INFO */
+
+ /* Convert to a number (note : Wavelan specific) */
+ lp->domain_id = simple_strtoul(essid, &endp, 16);
+ /* Has it worked ? */
+ if(endp > essid)
+ lp->filter_domains = 1;
+ else {
+ lp->filter_domains = 0;
+ ret = -EINVAL;
+ }
+ }
+
+ /* Enable interrupts and restore flags. */
+ spin_unlock_irqrestore(&lp->spinlock, flags);
+
+ return ret;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Wireless Handler : get ESSID (domain)
+ */
+static int wavelan_get_essid(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *extra)
+{
+ net_local *lp = netdev_priv(dev);
+
+ /* Is the domain ID active ? */
+ wrqu->data.flags = lp->filter_domains;
+
+ /* Copy Domain ID into a string (Wavelan specific) */
+ /* Sound crazy, be we can't have a snprintf in the kernel !!! */
+ sprintf(extra, "%lX", lp->domain_id);
+ extra[IW_ESSID_MAX_SIZE] = '\0';
+
+ /* Set the length */
+ wrqu->data.length = strlen(extra) + 1;
+
+ return 0;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Wireless Handler : set AP address
+ */
+static int wavelan_set_wap(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *extra)
+{
+#ifdef DEBUG_IOCTL_INFO
+ printk(KERN_DEBUG "Set AP to : %02X:%02X:%02X:%02X:%02X:%02X\n",
+ wrqu->ap_addr.sa_data[0],
+ wrqu->ap_addr.sa_data[1],
+ wrqu->ap_addr.sa_data[2],
+ wrqu->ap_addr.sa_data[3],
+ wrqu->ap_addr.sa_data[4],
+ wrqu->ap_addr.sa_data[5]);
+#endif /* DEBUG_IOCTL_INFO */
+
+ return -EOPNOTSUPP;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Wireless Handler : get AP address
+ */
+static int wavelan_get_wap(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *extra)
+{
+ /* Should get the real McCoy instead of own Ethernet address */
+ memcpy(wrqu->ap_addr.sa_data, dev->dev_addr, WAVELAN_ADDR_SIZE);
+ wrqu->ap_addr.sa_family = ARPHRD_ETHER;
+
+ return -EOPNOTSUPP;
+}
+#endif /* WAVELAN_ROAMING_EXT */
+
+#ifdef WAVELAN_ROAMING
+/*------------------------------------------------------------------*/
+/*
+ * Wireless Handler : set mode
+ */
+static int wavelan_set_mode(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *extra)
+{
+ net_local *lp = netdev_priv(dev);
+ unsigned long flags;
+ int ret = 0;
+
+ /* Disable interrupts and save flags. */
+ spin_lock_irqsave(&lp->spinlock, flags);
+
+ /* Check mode */
+ switch(wrqu->mode) {
+ case IW_MODE_ADHOC:
+ if(do_roaming) {
+ wv_roam_cleanup(dev);
+ do_roaming = 0;
+ }
+ break;
+ case IW_MODE_INFRA:
+ if(!do_roaming) {
+ wv_roam_init(dev);
+ do_roaming = 1;
+ }
+ break;
+ default:
+ ret = -EINVAL;
+ }
+
+ /* Enable interrupts and restore flags. */
+ spin_unlock_irqrestore(&lp->spinlock, flags);
+
+ return ret;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Wireless Handler : get mode
+ */
+static int wavelan_get_mode(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *extra)
+{
+ if(do_roaming)
+ wrqu->mode = IW_MODE_INFRA;
+ else
+ wrqu->mode = IW_MODE_ADHOC;
+
+ return 0;
+}
+#endif /* WAVELAN_ROAMING */
+
+/*------------------------------------------------------------------*/
+/*
+ * Wireless Handler : get range info
+ */
+static int wavelan_get_range(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *extra)
+{
+ kio_addr_t base = dev->base_addr;
+ net_local *lp = netdev_priv(dev);
+ struct iw_range *range = (struct iw_range *) extra;
+ unsigned long flags;
+ int ret = 0;
+
+ /* Set the length (very important for backward compatibility) */
+ wrqu->data.length = sizeof(struct iw_range);
+
+ /* Set all the info we don't care or don't know about to zero */
+ memset(range, 0, sizeof(struct iw_range));
+
+ /* Set the Wireless Extension versions */
+ range->we_version_compiled = WIRELESS_EXT;
+ range->we_version_source = 9;
+
+ /* Set information in the range struct. */
+ range->throughput = 1.4 * 1000 * 1000; /* don't argue on this ! */
+ range->min_nwid = 0x0000;
+ range->max_nwid = 0xFFFF;
+
+ range->sensitivity = 0x3F;
+ range->max_qual.qual = MMR_SGNL_QUAL;
+ range->max_qual.level = MMR_SIGNAL_LVL;
+ range->max_qual.noise = MMR_SILENCE_LVL;
+ range->avg_qual.qual = MMR_SGNL_QUAL; /* Always max */
+ /* Need to get better values for those two */
+ range->avg_qual.level = 30;
+ range->avg_qual.noise = 8;
+
+ range->num_bitrates = 1;
+ range->bitrate[0] = 2000000; /* 2 Mb/s */
+
+ /* Event capability (kernel + driver) */
+ range->event_capa[0] = (IW_EVENT_CAPA_MASK(0x8B02) |
+ IW_EVENT_CAPA_MASK(0x8B04) |
+ IW_EVENT_CAPA_MASK(0x8B06));
+ range->event_capa[1] = IW_EVENT_CAPA_K_1;
+
+ /* Disable interrupts and save flags. */
+ spin_lock_irqsave(&lp->spinlock, flags);
+
+ /* Attempt to recognise 2.00 cards (2.4 GHz frequency selectable). */
+ if (!(mmc_in(base, mmroff(0, mmr_fee_status)) &
+ (MMR_FEE_STATUS_DWLD | MMR_FEE_STATUS_BUSY))) {
+ range->num_channels = 10;
+ range->num_frequency = wv_frequency_list(base, range->freq,
+ IW_MAX_FREQUENCIES);
+ } else
+ range->num_channels = range->num_frequency = 0;
+
+ /* Encryption supported ? */
+ if (mmc_encr(base)) {
+ range->encoding_size[0] = 8; /* DES = 64 bits key */
+ range->num_encoding_sizes = 1;
+ range->max_encoding_tokens = 1; /* Only one key possible */
+ } else {
+ range->num_encoding_sizes = 0;
+ range->max_encoding_tokens = 0;
+ }
+
+ /* Enable interrupts and restore flags. */
+ spin_unlock_irqrestore(&lp->spinlock, flags);
+
+ return ret;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Wireless Private Handler : set quality threshold
+ */
+static int wavelan_set_qthr(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *extra)
+{
+ kio_addr_t base = dev->base_addr;
+ net_local *lp = netdev_priv(dev);
+ psa_t psa;
+ unsigned long flags;
+
+ /* Disable interrupts and save flags. */
+ spin_lock_irqsave(&lp->spinlock, flags);
+
+ psa.psa_quality_thr = *(extra) & 0x0F;
+ psa_write(dev,
+ (char *) &psa.psa_quality_thr - (char *) &psa,
+ (unsigned char *) &psa.psa_quality_thr, 1);
+ /* update the Wavelan checksum */
+ update_psa_checksum(dev);
+ mmc_out(base, mmwoff(0, mmw_quality_thr),
+ psa.psa_quality_thr);
+
+ /* Enable interrupts and restore flags. */
+ spin_unlock_irqrestore(&lp->spinlock, flags);
+
+ return 0;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Wireless Private Handler : get quality threshold
+ */
+static int wavelan_get_qthr(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *extra)
+{
+ net_local *lp = netdev_priv(dev);
+ psa_t psa;
+ unsigned long flags;
+
+ /* Disable interrupts and save flags. */
+ spin_lock_irqsave(&lp->spinlock, flags);
+
+ psa_read(dev,
+ (char *) &psa.psa_quality_thr - (char *) &psa,
+ (unsigned char *) &psa.psa_quality_thr, 1);
+ *(extra) = psa.psa_quality_thr & 0x0F;
+
+ /* Enable interrupts and restore flags. */
+ spin_unlock_irqrestore(&lp->spinlock, flags);
+
+ return 0;
+}
+
+#ifdef WAVELAN_ROAMING
+/*------------------------------------------------------------------*/
+/*
+ * Wireless Private Handler : set roaming
+ */
+static int wavelan_set_roam(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *extra)
+{
+ net_local *lp = netdev_priv(dev);
+ unsigned long flags;
+
+ /* Disable interrupts and save flags. */
+ spin_lock_irqsave(&lp->spinlock, flags);
+
+ /* Note : should check if user == root */
+ if(do_roaming && (*extra)==0)
+ wv_roam_cleanup(dev);
+ else if(do_roaming==0 && (*extra)!=0)
+ wv_roam_init(dev);
+
+ do_roaming = (*extra);
+
+ /* Enable interrupts and restore flags. */
+ spin_unlock_irqrestore(&lp->spinlock, flags);
+
+ return 0;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Wireless Private Handler : get quality threshold
+ */
+static int wavelan_get_roam(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *extra)
+{
+ *(extra) = do_roaming;
+
+ return 0;
+}
+#endif /* WAVELAN_ROAMING */
+
+#ifdef HISTOGRAM
+/*------------------------------------------------------------------*/
+/*
+ * Wireless Private Handler : set histogram
+ */
+static int wavelan_set_histo(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *extra)
+{
+ net_local *lp = netdev_priv(dev);
+
+ /* Check the number of intervals. */
+ if (wrqu->data.length > 16) {
+ return(-E2BIG);
+ }
+
+ /* Disable histo while we copy the addresses.
+ * As we don't disable interrupts, we need to do this */
+ lp->his_number = 0;
+
+ /* Are there ranges to copy? */
+ if (wrqu->data.length > 0) {
+ /* Copy interval ranges to the driver */
+ memcpy(lp->his_range, extra, wrqu->data.length);
+
+ {
+ int i;
+ printk(KERN_DEBUG "Histo :");
+ for(i = 0; i < wrqu->data.length; i++)
+ printk(" %d", lp->his_range[i]);
+ printk("\n");
+ }
+
+ /* Reset result structure. */
+ memset(lp->his_sum, 0x00, sizeof(long) * 16);
+ }
+
+ /* Now we can set the number of ranges */
+ lp->his_number = wrqu->data.length;
+
+ return(0);
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Wireless Private Handler : get histogram
+ */
+static int wavelan_get_histo(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu,
+ char *extra)
+{
+ net_local *lp = netdev_priv(dev);
+
+ /* Set the number of intervals. */
+ wrqu->data.length = lp->his_number;
+
+ /* Give back the distribution statistics */
+ if(lp->his_number > 0)
+ memcpy(extra, lp->his_sum, sizeof(long) * lp->his_number);
+
+ return(0);
+}
+#endif /* HISTOGRAM */
+
+/*------------------------------------------------------------------*/
+/*
+ * Structures to export the Wireless Handlers
+ */
+
+static const struct iw_priv_args wavelan_private_args[] = {
+/*{ cmd, set_args, get_args, name } */
+ { SIOCSIPQTHR, IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1, 0, "setqualthr" },
+ { SIOCGIPQTHR, 0, IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1, "getqualthr" },
+ { SIOCSIPROAM, IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1, 0, "setroam" },
+ { SIOCGIPROAM, 0, IW_PRIV_TYPE_BYTE | IW_PRIV_SIZE_FIXED | 1, "getroam" },
+ { SIOCSIPHISTO, IW_PRIV_TYPE_BYTE | 16, 0, "sethisto" },
+ { SIOCGIPHISTO, 0, IW_PRIV_TYPE_INT | 16, "gethisto" },
+};
+
+static const iw_handler wavelan_handler[] =
+{
+ NULL, /* SIOCSIWNAME */
+ wavelan_get_name, /* SIOCGIWNAME */
+ wavelan_set_nwid, /* SIOCSIWNWID */
+ wavelan_get_nwid, /* SIOCGIWNWID */
+ wavelan_set_freq, /* SIOCSIWFREQ */
+ wavelan_get_freq, /* SIOCGIWFREQ */
+#ifdef WAVELAN_ROAMING
+ wavelan_set_mode, /* SIOCSIWMODE */
+ wavelan_get_mode, /* SIOCGIWMODE */
+#else /* WAVELAN_ROAMING */
+ NULL, /* SIOCSIWMODE */
+ NULL, /* SIOCGIWMODE */
+#endif /* WAVELAN_ROAMING */
+ wavelan_set_sens, /* SIOCSIWSENS */
+ wavelan_get_sens, /* SIOCGIWSENS */
+ NULL, /* SIOCSIWRANGE */
+ wavelan_get_range, /* SIOCGIWRANGE */
+ NULL, /* SIOCSIWPRIV */
+ NULL, /* SIOCGIWPRIV */
+ NULL, /* SIOCSIWSTATS */
+ NULL, /* SIOCGIWSTATS */
+ iw_handler_set_spy, /* SIOCSIWSPY */
+ iw_handler_get_spy, /* SIOCGIWSPY */
+ iw_handler_set_thrspy, /* SIOCSIWTHRSPY */
+ iw_handler_get_thrspy, /* SIOCGIWTHRSPY */
+#ifdef WAVELAN_ROAMING_EXT
+ wavelan_set_wap, /* SIOCSIWAP */
+ wavelan_get_wap, /* SIOCGIWAP */
+ NULL, /* -- hole -- */
+ NULL, /* SIOCGIWAPLIST */
+ NULL, /* -- hole -- */
+ NULL, /* -- hole -- */
+ wavelan_set_essid, /* SIOCSIWESSID */
+ wavelan_get_essid, /* SIOCGIWESSID */
+#else /* WAVELAN_ROAMING_EXT */
+ NULL, /* SIOCSIWAP */
+ NULL, /* SIOCGIWAP */
+ NULL, /* -- hole -- */
+ NULL, /* SIOCGIWAPLIST */
+ NULL, /* -- hole -- */
+ NULL, /* -- hole -- */
+ NULL, /* SIOCSIWESSID */
+ NULL, /* SIOCGIWESSID */
+#endif /* WAVELAN_ROAMING_EXT */
+ NULL, /* SIOCSIWNICKN */
+ NULL, /* SIOCGIWNICKN */
+ NULL, /* -- hole -- */
+ NULL, /* -- hole -- */
+ NULL, /* SIOCSIWRATE */
+ NULL, /* SIOCGIWRATE */
+ NULL, /* SIOCSIWRTS */
+ NULL, /* SIOCGIWRTS */
+ NULL, /* SIOCSIWFRAG */
+ NULL, /* SIOCGIWFRAG */
+ NULL, /* SIOCSIWTXPOW */
+ NULL, /* SIOCGIWTXPOW */
+ NULL, /* SIOCSIWRETRY */
+ NULL, /* SIOCGIWRETRY */
+ wavelan_set_encode, /* SIOCSIWENCODE */
+ wavelan_get_encode, /* SIOCGIWENCODE */
+};
+
+static const iw_handler wavelan_private_handler[] =
+{
+ wavelan_set_qthr, /* SIOCIWFIRSTPRIV */
+ wavelan_get_qthr, /* SIOCIWFIRSTPRIV + 1 */
+#ifdef WAVELAN_ROAMING
+ wavelan_set_roam, /* SIOCIWFIRSTPRIV + 2 */
+ wavelan_get_roam, /* SIOCIWFIRSTPRIV + 3 */
+#else /* WAVELAN_ROAMING */
+ NULL, /* SIOCIWFIRSTPRIV + 2 */
+ NULL, /* SIOCIWFIRSTPRIV + 3 */
+#endif /* WAVELAN_ROAMING */
+#ifdef HISTOGRAM
+ wavelan_set_histo, /* SIOCIWFIRSTPRIV + 4 */
+ wavelan_get_histo, /* SIOCIWFIRSTPRIV + 5 */
+#endif /* HISTOGRAM */
+};
+
+static const struct iw_handler_def wavelan_handler_def =
+{
+ .num_standard = sizeof(wavelan_handler)/sizeof(iw_handler),
+ .num_private = sizeof(wavelan_private_handler)/sizeof(iw_handler),
+ .num_private_args = sizeof(wavelan_private_args)/sizeof(struct iw_priv_args),
+ .standard = wavelan_handler,
+ .private = wavelan_private_handler,
+ .private_args = wavelan_private_args,
+ .get_wireless_stats = wavelan_get_wireless_stats,
+};
+
+/*------------------------------------------------------------------*/
+/*
+ * Get wireless statistics
+ * Called by /proc/net/wireless...
+ */
+static iw_stats *
+wavelan_get_wireless_stats(struct net_device * dev)
+{
+ kio_addr_t base = dev->base_addr;
+ net_local * lp = netdev_priv(dev);
+ mmr_t m;
+ iw_stats * wstats;
+ unsigned long flags;
+
+#ifdef DEBUG_IOCTL_TRACE
+ printk(KERN_DEBUG "%s: ->wavelan_get_wireless_stats()\n", dev->name);
+#endif
+
+ /* Disable interrupts & save flags */
+ spin_lock_irqsave(&lp->spinlock, flags);
+
+ wstats = &lp->wstats;
+
+ /* Get data from the mmc */
+ mmc_out(base, mmwoff(0, mmw_freeze), 1);
+
+ mmc_read(base, mmroff(0, mmr_dce_status), &m.mmr_dce_status, 1);
+ mmc_read(base, mmroff(0, mmr_wrong_nwid_l), &m.mmr_wrong_nwid_l, 2);
+ mmc_read(base, mmroff(0, mmr_thr_pre_set), &m.mmr_thr_pre_set, 4);
+
+ mmc_out(base, mmwoff(0, mmw_freeze), 0);
+
+ /* Copy data to wireless stuff */
+ wstats->status = m.mmr_dce_status & MMR_DCE_STATUS;
+ wstats->qual.qual = m.mmr_sgnl_qual & MMR_SGNL_QUAL;
+ wstats->qual.level = m.mmr_signal_lvl & MMR_SIGNAL_LVL;
+ wstats->qual.noise = m.mmr_silence_lvl & MMR_SILENCE_LVL;
+ wstats->qual.updated = (((m.mmr_signal_lvl & MMR_SIGNAL_LVL_VALID) >> 7) |
+ ((m.mmr_signal_lvl & MMR_SIGNAL_LVL_VALID) >> 6) |
+ ((m.mmr_silence_lvl & MMR_SILENCE_LVL_VALID) >> 5));
+ wstats->discard.nwid += (m.mmr_wrong_nwid_h << 8) | m.mmr_wrong_nwid_l;
+ wstats->discard.code = 0L;
+ wstats->discard.misc = 0L;
+
+ /* ReEnable interrupts & restore flags */
+ spin_unlock_irqrestore(&lp->spinlock, flags);
+
+#ifdef DEBUG_IOCTL_TRACE
+ printk(KERN_DEBUG "%s: <-wavelan_get_wireless_stats()\n", dev->name);
+#endif
+ return &lp->wstats;
+}
+#endif /* WIRELESS_EXT */
+
+/************************* PACKET RECEPTION *************************/
+/*
+ * This part deal with receiving the packets.
+ * The interrupt handler get an interrupt when a packet has been
+ * successfully received and called this part...
+ */
+
+/*------------------------------------------------------------------*/
+/*
+ * Calculate the starting address of the frame pointed to by the receive
+ * frame pointer and verify that the frame seem correct
+ * (called by wv_packet_rcv())
+ */
+static inline int
+wv_start_of_frame(struct net_device * dev,
+ int rfp, /* end of frame */
+ int wrap) /* start of buffer */
+{
+ kio_addr_t base = dev->base_addr;
+ int rp;
+ int len;
+
+ rp = (rfp - 5 + RX_SIZE) % RX_SIZE;
+ outb(rp & 0xff, PIORL(base));
+ outb(((rp >> 8) & PIORH_MASK), PIORH(base));
+ len = inb(PIOP(base));
+ len |= inb(PIOP(base)) << 8;
+
+ /* Sanity checks on size */
+ /* Frame too big */
+ if(len > MAXDATAZ + 100)
+ {
+#ifdef DEBUG_RX_ERROR
+ printk(KERN_INFO "%s: wv_start_of_frame: Received frame too large, rfp %d len 0x%x\n",
+ dev->name, rfp, len);
+#endif
+ return(-1);
+ }
+
+ /* Frame too short */
+ if(len < 7)
+ {
+#ifdef DEBUG_RX_ERROR
+ printk(KERN_INFO "%s: wv_start_of_frame: Received null frame, rfp %d len 0x%x\n",
+ dev->name, rfp, len);
+#endif
+ return(-1);
+ }
+
+ /* Wrap around buffer */
+ if(len > ((wrap - (rfp - len) + RX_SIZE) % RX_SIZE)) /* magic formula ! */
+ {
+#ifdef DEBUG_RX_ERROR
+ printk(KERN_INFO "%s: wv_start_of_frame: wrap around buffer, wrap %d rfp %d len 0x%x\n",
+ dev->name, wrap, rfp, len);
+#endif
+ return(-1);
+ }
+
+ return((rp - len + RX_SIZE) % RX_SIZE);
+} /* wv_start_of_frame */
+
+/*------------------------------------------------------------------*/
+/*
+ * This routine does the actual copy of data (including the ethernet
+ * header structure) from the WaveLAN card to an sk_buff chain that
+ * will be passed up to the network interface layer. NOTE: We
+ * currently don't handle trailer protocols (neither does the rest of
+ * the network interface), so if that is needed, it will (at least in
+ * part) be added here. The contents of the receive ring buffer are
+ * copied to a message chain that is then passed to the kernel.
+ *
+ * Note: if any errors occur, the packet is "dropped on the floor"
+ * (called by wv_packet_rcv())
+ */
+static inline void
+wv_packet_read(struct net_device * dev,
+ int fd_p,
+ int sksize)
+{
+ net_local * lp = netdev_priv(dev);
+ struct sk_buff * skb;
+
+#ifdef DEBUG_RX_TRACE
+ printk(KERN_DEBUG "%s: ->wv_packet_read(0x%X, %d)\n",
+ dev->name, fd_p, sksize);
+#endif
+
+ /* Allocate some buffer for the new packet */
+ if((skb = dev_alloc_skb(sksize+2)) == (struct sk_buff *) NULL)
+ {
+#ifdef DEBUG_RX_ERROR
+ printk(KERN_INFO "%s: wv_packet_read(): could not alloc_skb(%d, GFP_ATOMIC)\n",
+ dev->name, sksize);
+#endif
+ lp->stats.rx_dropped++;
+ /*
+ * Not only do we want to return here, but we also need to drop the
+ * packet on the floor to clear the interrupt.
+ */
+ return;
+ }
+
+ skb->dev = dev;
+
+ skb_reserve(skb, 2);
+ fd_p = read_ringbuf(dev, fd_p, (char *) skb_put(skb, sksize), sksize);
+ skb->protocol = eth_type_trans(skb, dev);
+
+#ifdef DEBUG_RX_INFO
+ wv_packet_info(skb->mac.raw, sksize, dev->name, "wv_packet_read");
+#endif /* DEBUG_RX_INFO */
+
+ /* Statistics gathering & stuff associated.
+ * It seem a bit messy with all the define, but it's really simple... */
+ if(
+#ifdef IW_WIRELESS_SPY
+ (lp->spy_data.spy_number > 0) ||
+#endif /* IW_WIRELESS_SPY */
+#ifdef HISTOGRAM
+ (lp->his_number > 0) ||
+#endif /* HISTOGRAM */
+#ifdef WAVELAN_ROAMING
+ (do_roaming) ||
+#endif /* WAVELAN_ROAMING */
+ 0)
+ {
+ u_char stats[3]; /* Signal level, Noise level, Signal quality */
+
+ /* read signal level, silence level and signal quality bytes */
+ fd_p = read_ringbuf(dev, (fd_p + 4) % RX_SIZE + RX_BASE,
+ stats, 3);
+#ifdef DEBUG_RX_INFO
+ printk(KERN_DEBUG "%s: wv_packet_read(): Signal level %d/63, Silence level %d/63, signal quality %d/16\n",
+ dev->name, stats[0] & 0x3F, stats[1] & 0x3F, stats[2] & 0x0F);
+#endif
+
+#ifdef WAVELAN_ROAMING
+ if(do_roaming)
+ if(WAVELAN_BEACON(skb->data))
+ wl_roam_gather(dev, skb->data, stats);
+#endif /* WAVELAN_ROAMING */
+
+#ifdef WIRELESS_SPY
+ wl_spy_gather(dev, skb->mac.raw + WAVELAN_ADDR_SIZE, stats);
+#endif /* WIRELESS_SPY */
+#ifdef HISTOGRAM
+ wl_his_gather(dev, stats);
+#endif /* HISTOGRAM */
+ }
+
+ /*
+ * Hand the packet to the Network Module
+ */
+ netif_rx(skb);
+
+ /* Keep stats up to date */
+ dev->last_rx = jiffies;
+ lp->stats.rx_packets++;
+ lp->stats.rx_bytes += sksize;
+
+#ifdef DEBUG_RX_TRACE
+ printk(KERN_DEBUG "%s: <-wv_packet_read()\n", dev->name);
+#endif
+ return;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * This routine is called by the interrupt handler to initiate a
+ * packet transfer from the card to the network interface layer above
+ * this driver. This routine checks if a buffer has been successfully
+ * received by the WaveLAN card. If so, the routine wv_packet_read is
+ * called to do the actual transfer of the card's data including the
+ * ethernet header into a packet consisting of an sk_buff chain.
+ * (called by wavelan_interrupt())
+ * Note : the spinlock is already grabbed for us and irq are disabled.
+ */
+static inline void
+wv_packet_rcv(struct net_device * dev)
+{
+ kio_addr_t base = dev->base_addr;
+ net_local * lp = netdev_priv(dev);
+ int newrfp;
+ int rp;
+ int len;
+ int f_start;
+ int status;
+ int i593_rfp;
+ int stat_ptr;
+ u_char c[4];
+
+#ifdef DEBUG_RX_TRACE
+ printk(KERN_DEBUG "%s: ->wv_packet_rcv()\n", dev->name);
+#endif
+
+ /* Get the new receive frame pointer from the i82593 chip */
+ outb(CR0_STATUS_2 | OP0_NOP, LCCR(base));
+ i593_rfp = inb(LCSR(base));
+ i593_rfp |= inb(LCSR(base)) << 8;
+ i593_rfp %= RX_SIZE;
+
+ /* Get the new receive frame pointer from the WaveLAN card.
+ * It is 3 bytes more than the increment of the i82593 receive
+ * frame pointer, for each packet. This is because it includes the
+ * 3 roaming bytes added by the mmc.
+ */
+ newrfp = inb(RPLL(base));
+ newrfp |= inb(RPLH(base)) << 8;
+ newrfp %= RX_SIZE;
+
+#ifdef DEBUG_RX_INFO
+ printk(KERN_DEBUG "%s: wv_packet_rcv(): i593_rfp %d stop %d newrfp %d lp->rfp %d\n",
+ dev->name, i593_rfp, lp->stop, newrfp, lp->rfp);
+#endif
+
+#ifdef DEBUG_RX_ERROR
+ /* If no new frame pointer... */
+ if(lp->overrunning || newrfp == lp->rfp)
+ printk(KERN_INFO "%s: wv_packet_rcv(): no new frame: i593_rfp %d stop %d newrfp %d lp->rfp %d\n",
+ dev->name, i593_rfp, lp->stop, newrfp, lp->rfp);
+#endif
+
+ /* Read all frames (packets) received */
+ while(newrfp != lp->rfp)
+ {
+ /* A frame is composed of the packet, followed by a status word,
+ * the length of the frame (word) and the mmc info (SNR & qual).
+ * It's because the length is at the end that we can only scan
+ * frames backward. */
+
+ /* Find the first frame by skipping backwards over the frames */
+ rp = newrfp; /* End of last frame */
+ while(((f_start = wv_start_of_frame(dev, rp, newrfp)) != lp->rfp) &&
+ (f_start != -1))
+ rp = f_start;
+
+ /* If we had a problem */
+ if(f_start == -1)
+ {
+#ifdef DEBUG_RX_ERROR
+ printk(KERN_INFO "wavelan_cs: cannot find start of frame ");
+ printk(" i593_rfp %d stop %d newrfp %d lp->rfp %d\n",
+ i593_rfp, lp->stop, newrfp, lp->rfp);
+#endif
+ lp->rfp = rp; /* Get to the last usable frame */
+ continue;
+ }
+
+ /* f_start point to the beggining of the first frame received
+ * and rp to the beggining of the next one */
+
+ /* Read status & length of the frame */
+ stat_ptr = (rp - 7 + RX_SIZE) % RX_SIZE;
+ stat_ptr = read_ringbuf(dev, stat_ptr, c, 4);
+ status = c[0] | (c[1] << 8);
+ len = c[2] | (c[3] << 8);
+
+ /* Check status */
+ if((status & RX_RCV_OK) != RX_RCV_OK)
+ {
+ lp->stats.rx_errors++;
+ if(status & RX_NO_SFD)
+ lp->stats.rx_frame_errors++;
+ if(status & RX_CRC_ERR)
+ lp->stats.rx_crc_errors++;
+ if(status & RX_OVRRUN)
+ lp->stats.rx_over_errors++;
+
+#ifdef DEBUG_RX_FAIL
+ printk(KERN_DEBUG "%s: wv_packet_rcv(): packet not received ok, status = 0x%x\n",
+ dev->name, status);
+#endif
+ }
+ else
+ /* Read the packet and transmit to Linux */
+ wv_packet_read(dev, f_start, len - 2);
+
+ /* One frame has been processed, skip it */
+ lp->rfp = rp;
+ }
+
+ /*
+ * Update the frame stop register, but set it to less than
+ * the full 8K to allow space for 3 bytes of signal strength
+ * per packet.
+ */
+ lp->stop = (i593_rfp + RX_SIZE - ((RX_SIZE / 64) * 3)) % RX_SIZE;
+ outb(OP0_SWIT_TO_PORT_1 | CR0_CHNL, LCCR(base));
+ outb(CR1_STOP_REG_UPDATE | (lp->stop >> RX_SIZE_SHIFT), LCCR(base));
+ outb(OP1_SWIT_TO_PORT_0, LCCR(base));
+
+#ifdef DEBUG_RX_TRACE
+ printk(KERN_DEBUG "%s: <-wv_packet_rcv()\n", dev->name);
+#endif
+}
+
+/*********************** PACKET TRANSMISSION ***********************/
+/*
+ * This part deal with sending packet through the wavelan
+ * We copy the packet to the send buffer and then issue the send
+ * command to the i82593. The result of this operation will be
+ * checked in wavelan_interrupt()
+ */
+
+/*------------------------------------------------------------------*/
+/*
+ * This routine fills in the appropriate registers and memory
+ * locations on the WaveLAN card and starts the card off on
+ * the transmit.
+ * (called in wavelan_packet_xmit())
+ */
+static inline void
+wv_packet_write(struct net_device * dev,
+ void * buf,
+ short length)
+{
+ net_local * lp = netdev_priv(dev);
+ kio_addr_t base = dev->base_addr;
+ unsigned long flags;
+ int clen = length;
+ register u_short xmtdata_base = TX_BASE;
+
+#ifdef DEBUG_TX_TRACE
+ printk(KERN_DEBUG "%s: ->wv_packet_write(%d)\n", dev->name, length);
+#endif
+
+ spin_lock_irqsave(&lp->spinlock, flags);
+
+ /* Write the length of data buffer followed by the buffer */
+ outb(xmtdata_base & 0xff, PIORL(base));
+ outb(((xmtdata_base >> 8) & PIORH_MASK) | PIORH_SEL_TX, PIORH(base));
+ outb(clen & 0xff, PIOP(base)); /* lsb */
+ outb(clen >> 8, PIOP(base)); /* msb */
+
+ /* Send the data */
+ outsb(PIOP(base), buf, clen);
+
+ /* Indicate end of transmit chain */
+ outb(OP0_NOP, PIOP(base));
+ /* josullvn@cs.cmu.edu: need to send a second NOP for alignment... */
+ outb(OP0_NOP, PIOP(base));
+
+ /* Reset the transmit DMA pointer */
+ hacr_write_slow(base, HACR_PWR_STAT | HACR_TX_DMA_RESET);
+ hacr_write(base, HACR_DEFAULT);
+ /* Send the transmit command */
+ wv_82593_cmd(dev, "wv_packet_write(): transmit",
+ OP0_TRANSMIT, SR0_NO_RESULT);
+
+ /* Make sure the watchdog will keep quiet for a while */
+ dev->trans_start = jiffies;
+
+ /* Keep stats up to date */
+ lp->stats.tx_bytes += length;
+
+ spin_unlock_irqrestore(&lp->spinlock, flags);
+
+#ifdef DEBUG_TX_INFO
+ wv_packet_info((u_char *) buf, length, dev->name, "wv_packet_write");
+#endif /* DEBUG_TX_INFO */
+
+#ifdef DEBUG_TX_TRACE
+ printk(KERN_DEBUG "%s: <-wv_packet_write()\n", dev->name);
+#endif
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * This routine is called when we want to send a packet (NET3 callback)
+ * In this routine, we check if the harware is ready to accept
+ * the packet. We also prevent reentrance. Then, we call the function
+ * to send the packet...
+ */
+static int
+wavelan_packet_xmit(struct sk_buff * skb,
+ struct net_device * dev)
+{
+ net_local * lp = netdev_priv(dev);
+ unsigned long flags;
+
+#ifdef DEBUG_TX_TRACE
+ printk(KERN_DEBUG "%s: ->wavelan_packet_xmit(0x%X)\n", dev->name,
+ (unsigned) skb);
+#endif
+
+ /*
+ * Block a timer-based transmit from overlapping a previous transmit.
+ * In other words, prevent reentering this routine.
+ */
+ netif_stop_queue(dev);
+
+ /* If somebody has asked to reconfigure the controller,
+ * we can do it now */
+ if(lp->reconfig_82593)
+ {
+ spin_lock_irqsave(&lp->spinlock, flags); /* Disable interrupts */
+ wv_82593_config(dev);
+ spin_unlock_irqrestore(&lp->spinlock, flags); /* Re-enable interrupts */
+ /* Note : the configure procedure was totally synchronous,
+ * so the Tx buffer is now free */
+ }
+
+#ifdef DEBUG_TX_ERROR
+ if (skb->next)
+ printk(KERN_INFO "skb has next\n");
+#endif
+
+ /* Check if we need some padding */
+ /* Note : on wireless the propagation time is in the order of 1us,
+ * and we don't have the Ethernet specific requirement of beeing
+ * able to detect collisions, therefore in theory we don't really
+ * need to pad. Jean II */
+ if (skb->len < ETH_ZLEN) {
+ skb = skb_padto(skb, ETH_ZLEN);
+ if (skb == NULL)
+ return 0;
+ }
+
+ wv_packet_write(dev, skb->data, skb->len);
+
+ dev_kfree_skb(skb);
+
+#ifdef DEBUG_TX_TRACE
+ printk(KERN_DEBUG "%s: <-wavelan_packet_xmit()\n", dev->name);
+#endif
+ return(0);
+}
+
+/********************** HARDWARE CONFIGURATION **********************/
+/*
+ * This part do the real job of starting and configuring the hardware.
+ */
+
+/*------------------------------------------------------------------*/
+/*
+ * Routine to initialize the Modem Management Controller.
+ * (called by wv_hw_config())
+ */
+static inline int
+wv_mmc_init(struct net_device * dev)
+{
+ kio_addr_t base = dev->base_addr;
+ psa_t psa;
+ mmw_t m;
+ int configured;
+ int i; /* Loop counter */
+
+#ifdef DEBUG_CONFIG_TRACE
+ printk(KERN_DEBUG "%s: ->wv_mmc_init()\n", dev->name);
+#endif
+
+ /* Read the parameter storage area */
+ psa_read(dev, 0, (unsigned char *) &psa, sizeof(psa));
+
+ /*
+ * Check the first three octets of the MAC addr for the manufacturer's code.
+ * Note: If you get the error message below, you've got a
+ * non-NCR/AT&T/Lucent PCMCIA cards, see wavelan_cs.h for detail on
+ * how to configure your card...
+ */
+ for(i = 0; i < (sizeof(MAC_ADDRESSES) / sizeof(char) / 3); i++)
+ if((psa.psa_univ_mac_addr[0] == MAC_ADDRESSES[i][0]) &&
+ (psa.psa_univ_mac_addr[1] == MAC_ADDRESSES[i][1]) &&
+ (psa.psa_univ_mac_addr[2] == MAC_ADDRESSES[i][2]))
+ break;
+
+ /* If we have not found it... */
+ if(i == (sizeof(MAC_ADDRESSES) / sizeof(char) / 3))
+ {
+#ifdef DEBUG_CONFIG_ERRORS
+ printk(KERN_WARNING "%s: wv_mmc_init(): Invalid MAC address: %02X:%02X:%02X:...\n",
+ dev->name, psa.psa_univ_mac_addr[0],
+ psa.psa_univ_mac_addr[1], psa.psa_univ_mac_addr[2]);
+#endif
+ return FALSE;
+ }
+
+ /* Get the MAC address */
+ memcpy(&dev->dev_addr[0], &psa.psa_univ_mac_addr[0], WAVELAN_ADDR_SIZE);
+
+#ifdef USE_PSA_CONFIG
+ configured = psa.psa_conf_status & 1;
+#else
+ configured = 0;
+#endif
+
+ /* Is the PSA is not configured */
+ if(!configured)
+ {
+ /* User will be able to configure NWID after (with iwconfig) */
+ psa.psa_nwid[0] = 0;
+ psa.psa_nwid[1] = 0;
+
+ /* As NWID is not set : no NWID checking */
+ psa.psa_nwid_select = 0;
+
+ /* Disable encryption */
+ psa.psa_encryption_select = 0;
+
+ /* Set to standard values
+ * 0x04 for AT,
+ * 0x01 for MCA,
+ * 0x04 for PCMCIA and 2.00 card (AT&T 407-024689/E document)
+ */
+ if (psa.psa_comp_number & 1)
+ psa.psa_thr_pre_set = 0x01;
+ else
+ psa.psa_thr_pre_set = 0x04;
+ psa.psa_quality_thr = 0x03;
+
+ /* It is configured */
+ psa.psa_conf_status |= 1;
+
+#ifdef USE_PSA_CONFIG
+ /* Write the psa */
+ psa_write(dev, (char *)psa.psa_nwid - (char *)&psa,
+ (unsigned char *)psa.psa_nwid, 4);
+ psa_write(dev, (char *)&psa.psa_thr_pre_set - (char *)&psa,
+ (unsigned char *)&psa.psa_thr_pre_set, 1);
+ psa_write(dev, (char *)&psa.psa_quality_thr - (char *)&psa,
+ (unsigned char *)&psa.psa_quality_thr, 1);
+ psa_write(dev, (char *)&psa.psa_conf_status - (char *)&psa,
+ (unsigned char *)&psa.psa_conf_status, 1);
+ /* update the Wavelan checksum */
+ update_psa_checksum(dev);
+#endif /* USE_PSA_CONFIG */
+ }
+
+ /* Zero the mmc structure */
+ memset(&m, 0x00, sizeof(m));
+
+ /* Copy PSA info to the mmc */
+ m.mmw_netw_id_l = psa.psa_nwid[1];
+ m.mmw_netw_id_h = psa.psa_nwid[0];
+
+ if(psa.psa_nwid_select & 1)
+ m.mmw_loopt_sel = 0x00;
+ else
+ m.mmw_loopt_sel = MMW_LOOPT_SEL_DIS_NWID;
+
+ memcpy(&m.mmw_encr_key, &psa.psa_encryption_key,
+ sizeof(m.mmw_encr_key));
+
+ if(psa.psa_encryption_select)
+ m.mmw_encr_enable = MMW_ENCR_ENABLE_EN | MMW_ENCR_ENABLE_MODE;
+ else
+ m.mmw_encr_enable = 0;
+
+ m.mmw_thr_pre_set = psa.psa_thr_pre_set & 0x3F;
+ m.mmw_quality_thr = psa.psa_quality_thr & 0x0F;
+
+ /*
+ * Set default modem control parameters.
+ * See NCR document 407-0024326 Rev. A.
+ */
+ m.mmw_jabber_enable = 0x01;
+ m.mmw_anten_sel = MMW_ANTEN_SEL_ALG_EN;
+ m.mmw_ifs = 0x20;
+ m.mmw_mod_delay = 0x04;
+ m.mmw_jam_time = 0x38;
+
+ m.mmw_des_io_invert = 0;
+ m.mmw_freeze = 0;
+ m.mmw_decay_prm = 0;
+ m.mmw_decay_updat_prm = 0;
+
+ /* Write all info to mmc */
+ mmc_write(base, 0, (u_char *)&m, sizeof(m));
+
+ /* The following code start the modem of the 2.00 frequency
+ * selectable cards at power on. It's not strictly needed for the
+ * following boots...
+ * The original patch was by Joe Finney for the PCMCIA driver, but
+ * I've cleaned it a bit and add documentation.
+ * Thanks to Loeke Brederveld from Lucent for the info.
+ */
+
+ /* Attempt to recognise 2.00 cards (2.4 GHz frequency selectable)
+ * (does it work for everybody ? - especially old cards...) */
+ /* Note : WFREQSEL verify that it is able to read from EEprom
+ * a sensible frequency (address 0x00) + that MMR_FEE_STATUS_ID
+ * is 0xA (Xilinx version) or 0xB (Ariadne version).
+ * My test is more crude but do work... */
+ if(!(mmc_in(base, mmroff(0, mmr_fee_status)) &
+ (MMR_FEE_STATUS_DWLD | MMR_FEE_STATUS_BUSY)))
+ {
+ /* We must download the frequency parameters to the
+ * synthetisers (from the EEprom - area 1)
+ * Note : as the EEprom is auto decremented, we set the end
+ * if the area... */
+ m.mmw_fee_addr = 0x0F;
+ m.mmw_fee_ctrl = MMW_FEE_CTRL_READ | MMW_FEE_CTRL_DWLD;
+ mmc_write(base, (char *)&m.mmw_fee_ctrl - (char *)&m,
+ (unsigned char *)&m.mmw_fee_ctrl, 2);
+
+ /* Wait until the download is finished */
+ fee_wait(base, 100, 100);
+
+#ifdef DEBUG_CONFIG_INFO
+ /* The frequency was in the last word downloaded... */
+ mmc_read(base, (char *)&m.mmw_fee_data_l - (char *)&m,
+ (unsigned char *)&m.mmw_fee_data_l, 2);
+
+ /* Print some info for the user */
+ printk(KERN_DEBUG "%s: Wavelan 2.00 recognised (frequency select) : Current frequency = %ld\n",
+ dev->name,
+ ((m.mmw_fee_data_h << 4) |
+ (m.mmw_fee_data_l >> 4)) * 5 / 2 + 24000L);
+#endif
+
+ /* We must now download the power adjust value (gain) to
+ * the synthetisers (from the EEprom - area 7 - DAC) */
+ m.mmw_fee_addr = 0x61;
+ m.mmw_fee_ctrl = MMW_FEE_CTRL_READ | MMW_FEE_CTRL_DWLD;
+ mmc_write(base, (char *)&m.mmw_fee_ctrl - (char *)&m,
+ (unsigned char *)&m.mmw_fee_ctrl, 2);
+
+ /* Wait until the download is finished */
+ } /* if 2.00 card */
+
+#ifdef DEBUG_CONFIG_TRACE
+ printk(KERN_DEBUG "%s: <-wv_mmc_init()\n", dev->name);
+#endif
+ return TRUE;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Routine to gracefully turn off reception, and wait for any commands
+ * to complete.
+ * (called in wv_ru_start() and wavelan_close() and wavelan_event())
+ */
+static int
+wv_ru_stop(struct net_device * dev)
+{
+ kio_addr_t base = dev->base_addr;
+ net_local * lp = netdev_priv(dev);
+ unsigned long flags;
+ int status;
+ int spin;
+
+#ifdef DEBUG_CONFIG_TRACE
+ printk(KERN_DEBUG "%s: ->wv_ru_stop()\n", dev->name);
+#endif
+
+ spin_lock_irqsave(&lp->spinlock, flags);
+
+ /* First, send the LAN controller a stop receive command */
+ wv_82593_cmd(dev, "wv_graceful_shutdown(): stop-rcv",
+ OP0_STOP_RCV, SR0_NO_RESULT);
+
+ /* Then, spin until the receive unit goes idle */
+ spin = 300;
+ do
+ {
+ udelay(10);
+ outb(OP0_NOP | CR0_STATUS_3, LCCR(base));
+ status = inb(LCSR(base));
+ }
+ while(((status & SR3_RCV_STATE_MASK) != SR3_RCV_IDLE) && (spin-- > 0));
+
+ /* Now, spin until the chip finishes executing its current command */
+ do
+ {
+ udelay(10);
+ outb(OP0_NOP | CR0_STATUS_3, LCCR(base));
+ status = inb(LCSR(base));
+ }
+ while(((status & SR3_EXEC_STATE_MASK) != SR3_EXEC_IDLE) && (spin-- > 0));
+
+ spin_unlock_irqrestore(&lp->spinlock, flags);
+
+ /* If there was a problem */
+ if(spin <= 0)
+ {
+#ifdef DEBUG_CONFIG_ERRORS
+ printk(KERN_INFO "%s: wv_ru_stop(): The chip doesn't want to stop...\n",
+ dev->name);
+#endif
+ return FALSE;
+ }
+
+#ifdef DEBUG_CONFIG_TRACE
+ printk(KERN_DEBUG "%s: <-wv_ru_stop()\n", dev->name);
+#endif
+ return TRUE;
+} /* wv_ru_stop */
+
+/*------------------------------------------------------------------*/
+/*
+ * This routine starts the receive unit running. First, it checks if
+ * the card is actually ready. Then the card is instructed to receive
+ * packets again.
+ * (called in wv_hw_reset() & wavelan_open())
+ */
+static int
+wv_ru_start(struct net_device * dev)
+{
+ kio_addr_t base = dev->base_addr;
+ net_local * lp = netdev_priv(dev);
+ unsigned long flags;
+
+#ifdef DEBUG_CONFIG_TRACE
+ printk(KERN_DEBUG "%s: ->wv_ru_start()\n", dev->name);
+#endif
+
+ /*
+ * We need to start from a quiescent state. To do so, we could check
+ * if the card is already running, but instead we just try to shut
+ * it down. First, we disable reception (in case it was already enabled).
+ */
+ if(!wv_ru_stop(dev))
+ return FALSE;
+
+ spin_lock_irqsave(&lp->spinlock, flags);
+
+ /* Now we know that no command is being executed. */
+
+ /* Set the receive frame pointer and stop pointer */
+ lp->rfp = 0;
+ outb(OP0_SWIT_TO_PORT_1 | CR0_CHNL, LCCR(base));
+
+ /* Reset ring management. This sets the receive frame pointer to 1 */
+ outb(OP1_RESET_RING_MNGMT, LCCR(base));
+
+#if 0
+ /* XXX the i82593 manual page 6-4 seems to indicate that the stop register
+ should be set as below */
+ /* outb(CR1_STOP_REG_UPDATE|((RX_SIZE - 0x40)>> RX_SIZE_SHIFT),LCCR(base));*/
+#elif 0
+ /* but I set it 0 instead */
+ lp->stop = 0;
+#else
+ /* but I set it to 3 bytes per packet less than 8K */
+ lp->stop = (0 + RX_SIZE - ((RX_SIZE / 64) * 3)) % RX_SIZE;
+#endif
+ outb(CR1_STOP_REG_UPDATE | (lp->stop >> RX_SIZE_SHIFT), LCCR(base));
+ outb(OP1_INT_ENABLE, LCCR(base));
+ outb(OP1_SWIT_TO_PORT_0, LCCR(base));
+
+ /* Reset receive DMA pointer */
+ hacr_write_slow(base, HACR_PWR_STAT | HACR_TX_DMA_RESET);
+ hacr_write_slow(base, HACR_DEFAULT);
+
+ /* Receive DMA on channel 1 */
+ wv_82593_cmd(dev, "wv_ru_start(): rcv-enable",
+ CR0_CHNL | OP0_RCV_ENABLE, SR0_NO_RESULT);
+
+#ifdef DEBUG_I82593_SHOW
+ {
+ int status;
+ int opri;
+ int spin = 10000;
+
+ /* spin until the chip starts receiving */
+ do
+ {
+ outb(OP0_NOP | CR0_STATUS_3, LCCR(base));
+ status = inb(LCSR(base));
+ if(spin-- <= 0)
+ break;
+ }
+ while(((status & SR3_RCV_STATE_MASK) != SR3_RCV_ACTIVE) &&
+ ((status & SR3_RCV_STATE_MASK) != SR3_RCV_READY));
+ printk(KERN_DEBUG "rcv status is 0x%x [i:%d]\n",
+ (status & SR3_RCV_STATE_MASK), i);
+ }
+#endif
+
+ spin_unlock_irqrestore(&lp->spinlock, flags);
+
+#ifdef DEBUG_CONFIG_TRACE
+ printk(KERN_DEBUG "%s: <-wv_ru_start()\n", dev->name);
+#endif
+ return TRUE;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * This routine does a standard config of the WaveLAN controller (i82593).
+ * In the ISA driver, this is integrated in wavelan_hardware_reset()
+ * (called by wv_hw_config(), wv_82593_reconfig() & wavelan_packet_xmit())
+ */
+static int
+wv_82593_config(struct net_device * dev)
+{
+ kio_addr_t base = dev->base_addr;
+ net_local * lp = netdev_priv(dev);
+ struct i82593_conf_block cfblk;
+ int ret = TRUE;
+
+#ifdef DEBUG_CONFIG_TRACE
+ printk(KERN_DEBUG "%s: ->wv_82593_config()\n", dev->name);
+#endif
+
+ /* Create & fill i82593 config block
+ *
+ * Now conform to Wavelan document WCIN085B
+ */
+ memset(&cfblk, 0x00, sizeof(struct i82593_conf_block));
+ cfblk.d6mod = FALSE; /* Run in i82593 advanced mode */
+ cfblk.fifo_limit = 5; /* = 56 B rx and 40 B tx fifo thresholds */
+ cfblk.forgnesi = FALSE; /* 0=82C501, 1=AMD7992B compatibility */
+ cfblk.fifo_32 = 1;
+ cfblk.throttle_enb = FALSE;
+ cfblk.contin = TRUE; /* enable continuous mode */
+ cfblk.cntrxint = FALSE; /* enable continuous mode receive interrupts */
+ cfblk.addr_len = WAVELAN_ADDR_SIZE;
+ cfblk.acloc = TRUE; /* Disable source addr insertion by i82593 */
+ cfblk.preamb_len = 0; /* 2 bytes preamble (SFD) */
+ cfblk.loopback = FALSE;
+ cfblk.lin_prio = 0; /* conform to 802.3 backoff algoritm */
+ cfblk.exp_prio = 5; /* conform to 802.3 backoff algoritm */
+ cfblk.bof_met = 1; /* conform to 802.3 backoff algoritm */
+ cfblk.ifrm_spc = 0x20; /* 32 bit times interframe spacing */
+ cfblk.slottim_low = 0x20; /* 32 bit times slot time */
+ cfblk.slottim_hi = 0x0;
+ cfblk.max_retr = 15;
+ cfblk.prmisc = ((lp->promiscuous) ? TRUE: FALSE); /* Promiscuous mode */
+ cfblk.bc_dis = FALSE; /* Enable broadcast reception */
+ cfblk.crs_1 = TRUE; /* Transmit without carrier sense */
+ cfblk.nocrc_ins = FALSE; /* i82593 generates CRC */
+ cfblk.crc_1632 = FALSE; /* 32-bit Autodin-II CRC */
+ cfblk.crs_cdt = FALSE; /* CD not to be interpreted as CS */
+ cfblk.cs_filter = 0; /* CS is recognized immediately */
+ cfblk.crs_src = FALSE; /* External carrier sense */
+ cfblk.cd_filter = 0; /* CD is recognized immediately */
+ cfblk.min_fr_len = ETH_ZLEN >> 2; /* Minimum frame length 64 bytes */
+ cfblk.lng_typ = FALSE; /* Length field > 1500 = type field */
+ cfblk.lng_fld = TRUE; /* Disable 802.3 length field check */
+ cfblk.rxcrc_xf = TRUE; /* Don't transfer CRC to memory */
+ cfblk.artx = TRUE; /* Disable automatic retransmission */
+ cfblk.sarec = TRUE; /* Disable source addr trig of CD */
+ cfblk.tx_jabber = TRUE; /* Disable jabber jam sequence */
+ cfblk.hash_1 = FALSE; /* Use bits 0-5 in mc address hash */
+ cfblk.lbpkpol = TRUE; /* Loopback pin active high */
+ cfblk.fdx = FALSE; /* Disable full duplex operation */
+ cfblk.dummy_6 = 0x3f; /* all ones */
+ cfblk.mult_ia = FALSE; /* No multiple individual addresses */
+ cfblk.dis_bof = FALSE; /* Disable the backoff algorithm ?! */
+ cfblk.dummy_1 = TRUE; /* set to 1 */
+ cfblk.tx_ifs_retrig = 3; /* Hmm... Disabled */
+#ifdef MULTICAST_ALL
+ cfblk.mc_all = (lp->allmulticast ? TRUE: FALSE); /* Allow all multicasts */
+#else
+ cfblk.mc_all = FALSE; /* No multicast all mode */
+#endif
+ cfblk.rcv_mon = 0; /* Monitor mode disabled */
+ cfblk.frag_acpt = TRUE; /* Do not accept fragments */
+ cfblk.tstrttrs = FALSE; /* No start transmission threshold */
+ cfblk.fretx = TRUE; /* FIFO automatic retransmission */
+ cfblk.syncrqs = FALSE; /* Synchronous DRQ deassertion... */
+ cfblk.sttlen = TRUE; /* 6 byte status registers */
+ cfblk.rx_eop = TRUE; /* Signal EOP on packet reception */
+ cfblk.tx_eop = TRUE; /* Signal EOP on packet transmission */
+ cfblk.rbuf_size = RX_SIZE>>11; /* Set receive buffer size */
+ cfblk.rcvstop = TRUE; /* Enable Receive Stop Register */
+
+#ifdef DEBUG_I82593_SHOW
+ {
+ u_char *c = (u_char *) &cfblk;
+ int i;
+ printk(KERN_DEBUG "wavelan_cs: config block:");
+ for(i = 0; i < sizeof(struct i82593_conf_block); i++,c++)
+ {
+ if((i % 16) == 0) printk("\n" KERN_DEBUG);
+ printk("%02x ", *c);
+ }
+ printk("\n");
+ }
+#endif
+
+ /* Copy the config block to the i82593 */
+ outb(TX_BASE & 0xff, PIORL(base));
+ outb(((TX_BASE >> 8) & PIORH_MASK) | PIORH_SEL_TX, PIORH(base));
+ outb(sizeof(struct i82593_conf_block) & 0xff, PIOP(base)); /* lsb */
+ outb(sizeof(struct i82593_conf_block) >> 8, PIOP(base)); /* msb */
+ outsb(PIOP(base), (char *) &cfblk, sizeof(struct i82593_conf_block));
+
+ /* reset transmit DMA pointer */
+ hacr_write_slow(base, HACR_PWR_STAT | HACR_TX_DMA_RESET);
+ hacr_write(base, HACR_DEFAULT);
+ if(!wv_82593_cmd(dev, "wv_82593_config(): configure",
+ OP0_CONFIGURE, SR0_CONFIGURE_DONE))
+ ret = FALSE;
+
+ /* Initialize adapter's ethernet MAC address */
+ outb(TX_BASE & 0xff, PIORL(base));
+ outb(((TX_BASE >> 8) & PIORH_MASK) | PIORH_SEL_TX, PIORH(base));
+ outb(WAVELAN_ADDR_SIZE, PIOP(base)); /* byte count lsb */
+ outb(0, PIOP(base)); /* byte count msb */
+ outsb(PIOP(base), &dev->dev_addr[0], WAVELAN_ADDR_SIZE);
+
+ /* reset transmit DMA pointer */
+ hacr_write_slow(base, HACR_PWR_STAT | HACR_TX_DMA_RESET);
+ hacr_write(base, HACR_DEFAULT);
+ if(!wv_82593_cmd(dev, "wv_82593_config(): ia-setup",
+ OP0_IA_SETUP, SR0_IA_SETUP_DONE))
+ ret = FALSE;
+
+#ifdef WAVELAN_ROAMING
+ /* If roaming is enabled, join the "Beacon Request" multicast group... */
+ /* But only if it's not in there already! */
+ if(do_roaming)
+ dev_mc_add(dev,WAVELAN_BEACON_ADDRESS, WAVELAN_ADDR_SIZE, 1);
+#endif /* WAVELAN_ROAMING */
+
+ /* If any multicast address to set */
+ if(lp->mc_count)
+ {
+ struct dev_mc_list * dmi;
+ int addrs_len = WAVELAN_ADDR_SIZE * lp->mc_count;
+
+#ifdef DEBUG_CONFIG_INFO
+ printk(KERN_DEBUG "%s: wv_hw_config(): set %d multicast addresses:\n",
+ dev->name, lp->mc_count);
+ for(dmi=dev->mc_list; dmi; dmi=dmi->next)
+ printk(KERN_DEBUG " %02x:%02x:%02x:%02x:%02x:%02x\n",
+ dmi->dmi_addr[0], dmi->dmi_addr[1], dmi->dmi_addr[2],
+ dmi->dmi_addr[3], dmi->dmi_addr[4], dmi->dmi_addr[5] );
+#endif
+
+ /* Initialize adapter's ethernet multicast addresses */
+ outb(TX_BASE & 0xff, PIORL(base));
+ outb(((TX_BASE >> 8) & PIORH_MASK) | PIORH_SEL_TX, PIORH(base));
+ outb(addrs_len & 0xff, PIOP(base)); /* byte count lsb */
+ outb((addrs_len >> 8), PIOP(base)); /* byte count msb */
+ for(dmi=dev->mc_list; dmi; dmi=dmi->next)
+ outsb(PIOP(base), dmi->dmi_addr, dmi->dmi_addrlen);
+
+ /* reset transmit DMA pointer */
+ hacr_write_slow(base, HACR_PWR_STAT | HACR_TX_DMA_RESET);
+ hacr_write(base, HACR_DEFAULT);
+ if(!wv_82593_cmd(dev, "wv_82593_config(): mc-setup",
+ OP0_MC_SETUP, SR0_MC_SETUP_DONE))
+ ret = FALSE;
+ lp->mc_count = dev->mc_count; /* remember to avoid repeated reset */
+ }
+
+ /* Job done, clear the flag */
+ lp->reconfig_82593 = FALSE;
+
+#ifdef DEBUG_CONFIG_TRACE
+ printk(KERN_DEBUG "%s: <-wv_82593_config()\n", dev->name);
+#endif
+ return(ret);
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Read the Access Configuration Register, perform a software reset,
+ * and then re-enable the card's software.
+ *
+ * If I understand correctly : reset the pcmcia interface of the
+ * wavelan.
+ * (called by wv_config())
+ */
+static inline int
+wv_pcmcia_reset(struct net_device * dev)
+{
+ int i;
+ conf_reg_t reg = { 0, CS_READ, CISREG_COR, 0 };
+ dev_link_t * link = ((net_local *)netdev_priv(dev))->link;
+
+#ifdef DEBUG_CONFIG_TRACE
+ printk(KERN_DEBUG "%s: ->wv_pcmcia_reset()\n", dev->name);
+#endif
+
+ i = pcmcia_access_configuration_register(link->handle, ®);
+ if(i != CS_SUCCESS)
+ {
+ cs_error(link->handle, AccessConfigurationRegister, i);
+ return FALSE;
+ }
+
+#ifdef DEBUG_CONFIG_INFO
+ printk(KERN_DEBUG "%s: wavelan_pcmcia_reset(): Config reg is 0x%x\n",
+ dev->name, (u_int) reg.Value);
+#endif
+
+ reg.Action = CS_WRITE;
+ reg.Value = reg.Value | COR_SW_RESET;
+ i = pcmcia_access_configuration_register(link->handle, ®);
+ if(i != CS_SUCCESS)
+ {
+ cs_error(link->handle, AccessConfigurationRegister, i);
+ return FALSE;
+ }
+
+ reg.Action = CS_WRITE;
+ reg.Value = COR_LEVEL_IRQ | COR_CONFIG;
+ i = pcmcia_access_configuration_register(link->handle, ®);
+ if(i != CS_SUCCESS)
+ {
+ cs_error(link->handle, AccessConfigurationRegister, i);
+ return FALSE;
+ }
+
+#ifdef DEBUG_CONFIG_TRACE
+ printk(KERN_DEBUG "%s: <-wv_pcmcia_reset()\n", dev->name);
+#endif
+ return TRUE;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * wavelan_hw_config() is called after a CARD_INSERTION event is
+ * received, to configure the wavelan hardware.
+ * Note that the reception will be enabled in wavelan->open(), so the
+ * device is configured but idle...
+ * Performs the following actions:
+ * 1. A pcmcia software reset (using wv_pcmcia_reset())
+ * 2. A power reset (reset DMA)
+ * 3. Reset the LAN controller
+ * 4. Initialize the radio modem (using wv_mmc_init)
+ * 5. Configure LAN controller (using wv_82593_config)
+ * 6. Perform a diagnostic on the LAN controller
+ * (called by wavelan_event() & wv_hw_reset())
+ */
+static int
+wv_hw_config(struct net_device * dev)
+{
+ net_local * lp = netdev_priv(dev);
+ kio_addr_t base = dev->base_addr;
+ unsigned long flags;
+ int ret = FALSE;
+
+#ifdef DEBUG_CONFIG_TRACE
+ printk(KERN_DEBUG "%s: ->wv_hw_config()\n", dev->name);
+#endif
+
+#ifdef STRUCT_CHECK
+ if(wv_structuct_check() != (char *) NULL)
+ {
+ printk(KERN_WARNING "%s: wv_hw_config: structure/compiler botch: \"%s\"\n",
+ dev->name, wv_structuct_check());
+ return FALSE;
+ }
+#endif /* STRUCT_CHECK == 1 */
+
+ /* Reset the pcmcia interface */
+ if(wv_pcmcia_reset(dev) == FALSE)
+ return FALSE;
+
+ /* Disable interrupts */
+ spin_lock_irqsave(&lp->spinlock, flags);
+
+ /* Disguised goto ;-) */
+ do
+ {
+ /* Power UP the module + reset the modem + reset host adapter
+ * (in fact, reset DMA channels) */
+ hacr_write_slow(base, HACR_RESET);
+ hacr_write(base, HACR_DEFAULT);
+
+ /* Check if the module has been powered up... */
+ if(hasr_read(base) & HASR_NO_CLK)
+ {
+#ifdef DEBUG_CONFIG_ERRORS
+ printk(KERN_WARNING "%s: wv_hw_config(): modem not connected or not a wavelan card\n",
+ dev->name);
+#endif
+ break;
+ }
+
+ /* initialize the modem */
+ if(wv_mmc_init(dev) == FALSE)
+ {
+#ifdef DEBUG_CONFIG_ERRORS
+ printk(KERN_WARNING "%s: wv_hw_config(): Can't configure the modem\n",
+ dev->name);
+#endif
+ break;
+ }
+
+ /* reset the LAN controller (i82593) */
+ outb(OP0_RESET, LCCR(base));
+ mdelay(1); /* A bit crude ! */
+
+ /* Initialize the LAN controller */
+ if(wv_82593_config(dev) == FALSE)
+ {
+#ifdef DEBUG_CONFIG_ERRORS
+ printk(KERN_INFO "%s: wv_hw_config(): i82593 init failed\n",
+ dev->name);
+#endif
+ break;
+ }
+
+ /* Diagnostic */
+ if(wv_diag(dev) == FALSE)
+ {
+#ifdef DEBUG_CONFIG_ERRORS
+ printk(KERN_INFO "%s: wv_hw_config(): i82593 diagnostic failed\n",
+ dev->name);
+#endif
+ break;
+ }
+
+ /*
+ * insert code for loopback test here
+ */
+
+ /* The device is now configured */
+ lp->configured = 1;
+ ret = TRUE;
+ }
+ while(0);
+
+ /* Re-enable interrupts */
+ spin_unlock_irqrestore(&lp->spinlock, flags);
+
+#ifdef DEBUG_CONFIG_TRACE
+ printk(KERN_DEBUG "%s: <-wv_hw_config()\n", dev->name);
+#endif
+ return(ret);
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Totally reset the wavelan and restart it.
+ * Performs the following actions:
+ * 1. Call wv_hw_config()
+ * 2. Start the LAN controller's receive unit
+ * (called by wavelan_event(), wavelan_watchdog() and wavelan_open())
+ */
+static inline void
+wv_hw_reset(struct net_device * dev)
+{
+ net_local * lp = netdev_priv(dev);
+
+#ifdef DEBUG_CONFIG_TRACE
+ printk(KERN_DEBUG "%s: ->wv_hw_reset()\n", dev->name);
+#endif
+
+ lp->nresets++;
+ lp->configured = 0;
+
+ /* Call wv_hw_config() for most of the reset & init stuff */
+ if(wv_hw_config(dev) == FALSE)
+ return;
+
+ /* start receive unit */
+ wv_ru_start(dev);
+
+#ifdef DEBUG_CONFIG_TRACE
+ printk(KERN_DEBUG "%s: <-wv_hw_reset()\n", dev->name);
+#endif
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * wv_pcmcia_config() is called after a CARD_INSERTION event is
+ * received, to configure the PCMCIA socket, and to make the ethernet
+ * device available to the system.
+ * (called by wavelan_event())
+ */
+static inline int
+wv_pcmcia_config(dev_link_t * link)
+{
+ client_handle_t handle = link->handle;
+ tuple_t tuple;
+ cisparse_t parse;
+ struct net_device * dev = (struct net_device *) link->priv;
+ int i;
+ u_char buf[64];
+ win_req_t req;
+ memreq_t mem;
+ net_local * lp = netdev_priv(dev);
+
+
+#ifdef DEBUG_CONFIG_TRACE
+ printk(KERN_DEBUG "->wv_pcmcia_config(0x%p)\n", link);
+#endif
+
+ /*
+ * This reads the card's CONFIG tuple to find its configuration
+ * registers.
+ */
+ do
+ {
+ tuple.Attributes = 0;
+ tuple.DesiredTuple = CISTPL_CONFIG;
+ i = pcmcia_get_first_tuple(handle, &tuple);
+ if(i != CS_SUCCESS)
+ break;
+ tuple.TupleData = (cisdata_t *)buf;
+ tuple.TupleDataMax = 64;
+ tuple.TupleOffset = 0;
+ i = pcmcia_get_tuple_data(handle, &tuple);
+ if(i != CS_SUCCESS)
+ break;
+ i = pcmcia_parse_tuple(handle, &tuple, &parse);
+ if(i != CS_SUCCESS)
+ break;
+ link->conf.ConfigBase = parse.config.base;
+ link->conf.Present = parse.config.rmask[0];
+ }
+ while(0);
+ if(i != CS_SUCCESS)
+ {
+ cs_error(link->handle, ParseTuple, i);
+ link->state &= ~DEV_CONFIG_PENDING;
+ return FALSE;
+ }
+
+ /* Configure card */
+ link->state |= DEV_CONFIG;
+ do
+ {
+ i = pcmcia_request_io(link->handle, &link->io);
+ if(i != CS_SUCCESS)
+ {
+ cs_error(link->handle, RequestIO, i);
+ break;
+ }
+
+ /*
+ * Now allocate an interrupt line. Note that this does not
+ * actually assign a handler to the interrupt.
+ */
+ i = pcmcia_request_irq(link->handle, &link->irq);
+ if(i != CS_SUCCESS)
+ {
+ cs_error(link->handle, RequestIRQ, i);
+ break;
+ }
+
+ /*
+ * This actually configures the PCMCIA socket -- setting up
+ * the I/O windows and the interrupt mapping.
+ */
+ link->conf.ConfigIndex = 1;
+ i = pcmcia_request_configuration(link->handle, &link->conf);
+ if(i != CS_SUCCESS)
+ {
+ cs_error(link->handle, RequestConfiguration, i);
+ break;
+ }
+
+ /*
+ * Allocate a small memory window. Note that the dev_link_t
+ * structure provides space for one window handle -- if your
+ * device needs several windows, you'll need to keep track of
+ * the handles in your private data structure, link->priv.
+ */
+ req.Attributes = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE;
+ req.Base = req.Size = 0;
+ req.AccessSpeed = mem_speed;
+ i = pcmcia_request_window(&link->handle, &req, &link->win);
+ if(i != CS_SUCCESS)
+ {
+ cs_error(link->handle, RequestWindow, i);
+ break;
+ }
+
+ lp->mem = ioremap(req.Base, req.Size);
+ dev->mem_start = (u_long)lp->mem;
+ dev->mem_end = dev->mem_start + req.Size;
+
+ mem.CardOffset = 0; mem.Page = 0;
+ i = pcmcia_map_mem_page(link->win, &mem);
+ if(i != CS_SUCCESS)
+ {
+ cs_error(link->handle, MapMemPage, i);
+ break;
+ }
+
+ /* Feed device with this info... */
+ dev->irq = link->irq.AssignedIRQ;
+ dev->base_addr = link->io.BasePort1;
+ netif_start_queue(dev);
+
+#ifdef DEBUG_CONFIG_INFO
+ printk(KERN_DEBUG "wv_pcmcia_config: MEMSTART %p IRQ %d IOPORT 0x%x\n",
+ lp->mem, dev->irq, (u_int) dev->base_addr);
+#endif
+
+ SET_NETDEV_DEV(dev, &handle_to_dev(handle));
+ i = register_netdev(dev);
+ if(i != 0)
+ {
+#ifdef DEBUG_CONFIG_ERRORS
+ printk(KERN_INFO "wv_pcmcia_config(): register_netdev() failed\n");
+#endif
+ break;
+ }
+ }
+ while(0); /* Humm... Disguised goto !!! */
+
+ link->state &= ~DEV_CONFIG_PENDING;
+ /* If any step failed, release any partially configured state */
+ if(i != 0)
+ {
+ wv_pcmcia_release(link);
+ return FALSE;
+ }
+
+ strcpy(((net_local *) netdev_priv(dev))->node.dev_name, dev->name);
+ link->dev = &((net_local *) netdev_priv(dev))->node;
+
+#ifdef DEBUG_CONFIG_TRACE
+ printk(KERN_DEBUG "<-wv_pcmcia_config()\n");
+#endif
+ return TRUE;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * After a card is removed, wv_pcmcia_release() will unregister the net
+ * device, and release the PCMCIA configuration. If the device is
+ * still open, this will be postponed until it is closed.
+ */
+static void
+wv_pcmcia_release(dev_link_t *link)
+{
+ struct net_device * dev = (struct net_device *) link->priv;
+ net_local * lp = netdev_priv(dev);
+
+#ifdef DEBUG_CONFIG_TRACE
+ printk(KERN_DEBUG "%s: -> wv_pcmcia_release(0x%p)\n", dev->name, link);
+#endif
+
+ /* Don't bother checking to see if these succeed or not */
+ iounmap(lp->mem);
+ pcmcia_release_window(link->win);
+ pcmcia_release_configuration(link->handle);
+ pcmcia_release_io(link->handle, &link->io);
+ pcmcia_release_irq(link->handle, &link->irq);
+
+ link->state &= ~DEV_CONFIG;
+
+#ifdef DEBUG_CONFIG_TRACE
+ printk(KERN_DEBUG "%s: <- wv_pcmcia_release()\n", dev->name);
+#endif
+}
+
+/************************ INTERRUPT HANDLING ************************/
+
+/*
+ * This function is the interrupt handler for the WaveLAN card. This
+ * routine will be called whenever:
+ * 1. A packet is received.
+ * 2. A packet has successfully been transferred and the unit is
+ * ready to transmit another packet.
+ * 3. A command has completed execution.
+ */
+static irqreturn_t
+wavelan_interrupt(int irq,
+ void * dev_id,
+ struct pt_regs * regs)
+{
+ struct net_device * dev;
+ net_local * lp;
+ kio_addr_t base;
+ int status0;
+ u_int tx_status;
+
+ if ((dev = dev_id) == NULL)
+ {
+#ifdef DEBUG_INTERRUPT_ERROR
+ printk(KERN_WARNING "wavelan_interrupt(): irq %d for unknown device.\n",
+ irq);
+#endif
+ return IRQ_NONE;
+ }
+
+#ifdef DEBUG_INTERRUPT_TRACE
+ printk(KERN_DEBUG "%s: ->wavelan_interrupt()\n", dev->name);
+#endif
+
+ lp = netdev_priv(dev);
+ base = dev->base_addr;
+
+#ifdef DEBUG_INTERRUPT_INFO
+ /* Check state of our spinlock (it should be cleared) */
+ if(spin_is_locked(&lp->spinlock))
+ printk(KERN_DEBUG
+ "%s: wavelan_interrupt(): spinlock is already locked !!!\n",
+ dev->name);
+#endif
+
+ /* Prevent reentrancy. We need to do that because we may have
+ * multiple interrupt handler running concurently.
+ * It is safe because interrupts are disabled before aquiring
+ * the spinlock. */
+ spin_lock(&lp->spinlock);
+
+ /* Treat all pending interrupts */
+ while(1)
+ {
+ /* ---------------- INTERRUPT CHECKING ---------------- */
+ /*
+ * Look for the interrupt and verify the validity
+ */
+ outb(CR0_STATUS_0 | OP0_NOP, LCCR(base));
+ status0 = inb(LCSR(base));
+
+#ifdef DEBUG_INTERRUPT_INFO
+ printk(KERN_DEBUG "status0 0x%x [%s => 0x%x]", status0,
+ (status0&SR0_INTERRUPT)?"int":"no int",status0&~SR0_INTERRUPT);
+ if(status0&SR0_INTERRUPT)
+ {
+ printk(" [%s => %d]\n", (status0 & SR0_CHNL) ? "chnl" :
+ ((status0 & SR0_EXECUTION) ? "cmd" :
+ ((status0 & SR0_RECEPTION) ? "recv" : "unknown")),
+ (status0 & SR0_EVENT_MASK));
+ }
+ else
+ printk("\n");
+#endif
+
+ /* Return if no actual interrupt from i82593 (normal exit) */
+ if(!(status0 & SR0_INTERRUPT))
+ break;
+
+ /* If interrupt is both Rx and Tx or none...
+ * This code in fact is there to catch the spurious interrupt
+ * when you remove the wavelan pcmcia card from the socket */
+ if(((status0 & SR0_BOTH_RX_TX) == SR0_BOTH_RX_TX) ||
+ ((status0 & SR0_BOTH_RX_TX) == 0x0))
+ {
+#ifdef DEBUG_INTERRUPT_INFO
+ printk(KERN_INFO "%s: wv_interrupt(): bogus interrupt (or from dead card) : %X\n",
+ dev->name, status0);
+#endif
+ /* Acknowledge the interrupt */
+ outb(CR0_INT_ACK | OP0_NOP, LCCR(base));
+ break;
+ }
+
+ /* ----------------- RECEIVING PACKET ----------------- */
+ /*
+ * When the wavelan signal the reception of a new packet,
+ * we call wv_packet_rcv() to copy if from the buffer and
+ * send it to NET3
+ */
+ if(status0 & SR0_RECEPTION)
+ {
+#ifdef DEBUG_INTERRUPT_INFO
+ printk(KERN_DEBUG "%s: wv_interrupt(): receive\n", dev->name);
+#endif
+
+ if((status0 & SR0_EVENT_MASK) == SR0_STOP_REG_HIT)
+ {
+#ifdef DEBUG_INTERRUPT_ERROR
+ printk(KERN_INFO "%s: wv_interrupt(): receive buffer overflow\n",
+ dev->name);
+#endif
+ lp->stats.rx_over_errors++;
+ lp->overrunning = 1;
+ }
+
+ /* Get the packet */
+ wv_packet_rcv(dev);
+ lp->overrunning = 0;
+
+ /* Acknowledge the interrupt */
+ outb(CR0_INT_ACK | OP0_NOP, LCCR(base));
+ continue;
+ }
+
+ /* ---------------- COMMAND COMPLETION ---------------- */
+ /*
+ * Interrupts issued when the i82593 has completed a command.
+ * Most likely : transmission done
+ */
+
+ /* If a transmission has been done */
+ if((status0 & SR0_EVENT_MASK) == SR0_TRANSMIT_DONE ||
+ (status0 & SR0_EVENT_MASK) == SR0_RETRANSMIT_DONE ||
+ (status0 & SR0_EVENT_MASK) == SR0_TRANSMIT_NO_CRC_DONE)
+ {
+#ifdef DEBUG_TX_ERROR
+ if((status0 & SR0_EVENT_MASK) == SR0_TRANSMIT_NO_CRC_DONE)
+ printk(KERN_INFO "%s: wv_interrupt(): packet transmitted without CRC.\n",
+ dev->name);
+#endif
+
+ /* Get transmission status */
+ tx_status = inb(LCSR(base));
+ tx_status |= (inb(LCSR(base)) << 8);
+#ifdef DEBUG_INTERRUPT_INFO
+ printk(KERN_DEBUG "%s: wv_interrupt(): transmission done\n",
+ dev->name);
+ {
+ u_int rcv_bytes;
+ u_char status3;
+ rcv_bytes = inb(LCSR(base));
+ rcv_bytes |= (inb(LCSR(base)) << 8);
+ status3 = inb(LCSR(base));
+ printk(KERN_DEBUG "tx_status 0x%02x rcv_bytes 0x%02x status3 0x%x\n",
+ tx_status, rcv_bytes, (u_int) status3);
+ }
+#endif
+ /* Check for possible errors */
+ if((tx_status & TX_OK) != TX_OK)
+ {
+ lp->stats.tx_errors++;
+
+ if(tx_status & TX_FRTL)
+ {
+#ifdef DEBUG_TX_ERROR
+ printk(KERN_INFO "%s: wv_interrupt(): frame too long\n",
+ dev->name);
+#endif
+ }
+ if(tx_status & TX_UND_RUN)
+ {
+#ifdef DEBUG_TX_FAIL
+ printk(KERN_DEBUG "%s: wv_interrupt(): DMA underrun\n",
+ dev->name);
+#endif
+ lp->stats.tx_aborted_errors++;
+ }
+ if(tx_status & TX_LOST_CTS)
+ {
+#ifdef DEBUG_TX_FAIL
+ printk(KERN_DEBUG "%s: wv_interrupt(): no CTS\n", dev->name);
+#endif
+ lp->stats.tx_carrier_errors++;
+ }
+ if(tx_status & TX_LOST_CRS)
+ {
+#ifdef DEBUG_TX_FAIL
+ printk(KERN_DEBUG "%s: wv_interrupt(): no carrier\n",
+ dev->name);
+#endif
+ lp->stats.tx_carrier_errors++;
+ }
+ if(tx_status & TX_HRT_BEAT)
+ {
+#ifdef DEBUG_TX_FAIL
+ printk(KERN_DEBUG "%s: wv_interrupt(): heart beat\n", dev->name);
+#endif
+ lp->stats.tx_heartbeat_errors++;
+ }
+ if(tx_status & TX_DEFER)
+ {
+#ifdef DEBUG_TX_FAIL
+ printk(KERN_DEBUG "%s: wv_interrupt(): channel jammed\n",
+ dev->name);
+#endif
+ }
+ /* Ignore late collisions since they're more likely to happen
+ * here (the WaveLAN design prevents the LAN controller from
+ * receiving while it is transmitting). We take action only when
+ * the maximum retransmit attempts is exceeded.
+ */
+ if(tx_status & TX_COLL)
+ {
+ if(tx_status & TX_MAX_COL)
+ {
+#ifdef DEBUG_TX_FAIL
+ printk(KERN_DEBUG "%s: wv_interrupt(): channel congestion\n",
+ dev->name);
+#endif
+ if(!(tx_status & TX_NCOL_MASK))
+ {
+ lp->stats.collisions += 0x10;
+ }
+ }
+ }
+ } /* if(!(tx_status & TX_OK)) */
+
+ lp->stats.collisions += (tx_status & TX_NCOL_MASK);
+ lp->stats.tx_packets++;
+
+ netif_wake_queue(dev);
+ outb(CR0_INT_ACK | OP0_NOP, LCCR(base)); /* Acknowledge the interrupt */
+ }
+ else /* if interrupt = transmit done or retransmit done */
+ {
+#ifdef DEBUG_INTERRUPT_ERROR
+ printk(KERN_INFO "wavelan_cs: unknown interrupt, status0 = %02x\n",
+ status0);
+#endif
+ outb(CR0_INT_ACK | OP0_NOP, LCCR(base)); /* Acknowledge the interrupt */
+ }
+ } /* while(1) */
+
+ spin_unlock(&lp->spinlock);
+
+#ifdef DEBUG_INTERRUPT_TRACE
+ printk(KERN_DEBUG "%s: <-wavelan_interrupt()\n", dev->name);
+#endif
+
+ /* We always return IRQ_HANDLED, because we will receive empty
+ * interrupts under normal operations. Anyway, it doesn't matter
+ * as we are dealing with an ISA interrupt that can't be shared.
+ *
+ * Explanation : under heavy receive, the following happens :
+ * ->wavelan_interrupt()
+ * (status0 & SR0_INTERRUPT) != 0
+ * ->wv_packet_rcv()
+ * (status0 & SR0_INTERRUPT) != 0
+ * ->wv_packet_rcv()
+ * (status0 & SR0_INTERRUPT) == 0 // i.e. no more event
+ * <-wavelan_interrupt()
+ * ->wavelan_interrupt()
+ * (status0 & SR0_INTERRUPT) == 0 // i.e. empty interrupt
+ * <-wavelan_interrupt()
+ * Jean II */
+ return IRQ_HANDLED;
+} /* wv_interrupt */
+
+/*------------------------------------------------------------------*/
+/*
+ * Watchdog: when we start a transmission, a timer is set for us in the
+ * kernel. If the transmission completes, this timer is disabled. If
+ * the timer expires, we are called and we try to unlock the hardware.
+ *
+ * Note : This watchdog is move clever than the one in the ISA driver,
+ * because it try to abort the current command before reseting
+ * everything...
+ * On the other hand, it's a bit simpler, because we don't have to
+ * deal with the multiple Tx buffers...
+ */
+static void
+wavelan_watchdog(struct net_device * dev)
+{
+ net_local * lp = netdev_priv(dev);
+ kio_addr_t base = dev->base_addr;
+ unsigned long flags;
+ int aborted = FALSE;
+
+#ifdef DEBUG_INTERRUPT_TRACE
+ printk(KERN_DEBUG "%s: ->wavelan_watchdog()\n", dev->name);
+#endif
+
+#ifdef DEBUG_INTERRUPT_ERROR
+ printk(KERN_INFO "%s: wavelan_watchdog: watchdog timer expired\n",
+ dev->name);
+#endif
+
+ spin_lock_irqsave(&lp->spinlock, flags);
+
+ /* Ask to abort the current command */
+ outb(OP0_ABORT, LCCR(base));
+
+ /* Wait for the end of the command (a bit hackish) */
+ if(wv_82593_cmd(dev, "wavelan_watchdog(): abort",
+ OP0_NOP | CR0_STATUS_3, SR0_EXECUTION_ABORTED))
+ aborted = TRUE;
+
+ /* Release spinlock here so that wv_hw_reset() can grab it */
+ spin_unlock_irqrestore(&lp->spinlock, flags);
+
+ /* Check if we were successful in aborting it */
+ if(!aborted)
+ {
+ /* It seem that it wasn't enough */
+#ifdef DEBUG_INTERRUPT_ERROR
+ printk(KERN_INFO "%s: wavelan_watchdog: abort failed, trying reset\n",
+ dev->name);
+#endif
+ wv_hw_reset(dev);
+ }
+
+#ifdef DEBUG_PSA_SHOW
+ {
+ psa_t psa;
+ psa_read(dev, 0, (unsigned char *) &psa, sizeof(psa));
+ wv_psa_show(&psa);
+ }
+#endif
+#ifdef DEBUG_MMC_SHOW
+ wv_mmc_show(dev);
+#endif
+#ifdef DEBUG_I82593_SHOW
+ wv_ru_show(dev);
+#endif
+
+ /* We are no more waiting for something... */
+ netif_wake_queue(dev);
+
+#ifdef DEBUG_INTERRUPT_TRACE
+ printk(KERN_DEBUG "%s: <-wavelan_watchdog()\n", dev->name);
+#endif
+}
+
+/********************* CONFIGURATION CALLBACKS *********************/
+/*
+ * Here are the functions called by the pcmcia package (cardmgr) and
+ * linux networking (NET3) for initialization, configuration and
+ * deinstallations of the Wavelan Pcmcia Hardware.
+ */
+
+/*------------------------------------------------------------------*/
+/*
+ * Configure and start up the WaveLAN PCMCIA adaptor.
+ * Called by NET3 when it "open" the device.
+ */
+static int
+wavelan_open(struct net_device * dev)
+{
+ net_local * lp = netdev_priv(dev);
+ dev_link_t * link = lp->link;
+ kio_addr_t base = dev->base_addr;
+
+#ifdef DEBUG_CALLBACK_TRACE
+ printk(KERN_DEBUG "%s: ->wavelan_open(dev=0x%x)\n", dev->name,
+ (unsigned int) dev);
+#endif
+
+ /* Check if the modem is powered up (wavelan_close() power it down */
+ if(hasr_read(base) & HASR_NO_CLK)
+ {
+ /* Power up (power up time is 250us) */
+ hacr_write(base, HACR_DEFAULT);
+
+ /* Check if the module has been powered up... */
+ if(hasr_read(base) & HASR_NO_CLK)
+ {
+#ifdef DEBUG_CONFIG_ERRORS
+ printk(KERN_WARNING "%s: wavelan_open(): modem not connected\n",
+ dev->name);
+#endif
+ return FALSE;
+ }
+ }
+
+ /* Start reception and declare the driver ready */
+ if(!lp->configured)
+ return FALSE;
+ if(!wv_ru_start(dev))
+ wv_hw_reset(dev); /* If problem : reset */
+ netif_start_queue(dev);
+
+ /* Mark the device as used */
+ link->open++;
+
+#ifdef WAVELAN_ROAMING
+ if(do_roaming)
+ wv_roam_init(dev);
+#endif /* WAVELAN_ROAMING */
+
+#ifdef DEBUG_CALLBACK_TRACE
+ printk(KERN_DEBUG "%s: <-wavelan_open()\n", dev->name);
+#endif
+ return 0;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Shutdown the WaveLAN PCMCIA adaptor.
+ * Called by NET3 when it "close" the device.
+ */
+static int
+wavelan_close(struct net_device * dev)
+{
+ dev_link_t * link = ((net_local *)netdev_priv(dev))->link;
+ kio_addr_t base = dev->base_addr;
+
+#ifdef DEBUG_CALLBACK_TRACE
+ printk(KERN_DEBUG "%s: ->wavelan_close(dev=0x%x)\n", dev->name,
+ (unsigned int) dev);
+#endif
+
+ /* If the device isn't open, then nothing to do */
+ if(!link->open)
+ {
+#ifdef DEBUG_CONFIG_INFO
+ printk(KERN_DEBUG "%s: wavelan_close(): device not open\n", dev->name);
+#endif
+ return 0;
+ }
+
+#ifdef WAVELAN_ROAMING
+ /* Cleanup of roaming stuff... */
+ if(do_roaming)
+ wv_roam_cleanup(dev);
+#endif /* WAVELAN_ROAMING */
+
+ link->open--;
+
+ /* If the card is still present */
+ if(netif_running(dev))
+ {
+ netif_stop_queue(dev);
+
+ /* Stop receiving new messages and wait end of transmission */
+ wv_ru_stop(dev);
+
+ /* Power down the module */
+ hacr_write(base, HACR_DEFAULT & (~HACR_PWR_STAT));
+ }
+
+#ifdef DEBUG_CALLBACK_TRACE
+ printk(KERN_DEBUG "%s: <-wavelan_close()\n", dev->name);
+#endif
+ return 0;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * wavelan_attach() creates an "instance" of the driver, allocating
+ * local data structures for one device (one interface). The device
+ * is registered with Card Services.
+ *
+ * The dev_link structure is initialized, but we don't actually
+ * configure the card at this point -- we wait until we receive a
+ * card insertion event.
+ */
+static dev_link_t *
+wavelan_attach(void)
+{
+ client_reg_t client_reg; /* Register with cardmgr */
+ dev_link_t * link; /* Info for cardmgr */
+ struct net_device * dev; /* Interface generic data */
+ net_local * lp; /* Interface specific data */
+ int ret;
+
+#ifdef DEBUG_CALLBACK_TRACE
+ printk(KERN_DEBUG "-> wavelan_attach()\n");
+#endif
+
+ /* Initialize the dev_link_t structure */
+ link = kmalloc(sizeof(struct dev_link_t), GFP_KERNEL);
+ if (!link) return NULL;
+ memset(link, 0, sizeof(struct dev_link_t));
+
+ /* The io structure describes IO port mapping */
+ link->io.NumPorts1 = 8;
+ link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
+ link->io.IOAddrLines = 3;
+
+ /* Interrupt setup */
+ link->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT;
+ link->irq.IRQInfo1 = IRQ_LEVEL_ID;
+ link->irq.Handler = wavelan_interrupt;
+
+ /* General socket configuration */
+ link->conf.Attributes = CONF_ENABLE_IRQ;
+ link->conf.Vcc = 50;
+ link->conf.IntType = INT_MEMORY_AND_IO;
+
+ /* Chain drivers */
+ link->next = dev_list;
+ dev_list = link;
+
+ /* Allocate the generic data structure */
+ dev = alloc_etherdev(sizeof(net_local));
+ if (!dev) {
+ kfree(link);
+ return NULL;
+ }
+ link->priv = link->irq.Instance = dev;
+
+ lp = netdev_priv(dev);
+
+ /* Init specific data */
+ lp->configured = 0;
+ lp->reconfig_82593 = FALSE;
+ lp->nresets = 0;
+ /* Multicast stuff */
+ lp->promiscuous = 0;
+ lp->allmulticast = 0;
+ lp->mc_count = 0;
+
+ /* Init spinlock */
+ spin_lock_init(&lp->spinlock);
+
+ /* back links */
+ lp->link = link;
+ lp->dev = dev;
+
+ /* wavelan NET3 callbacks */
+ SET_MODULE_OWNER(dev);
+ dev->open = &wavelan_open;
+ dev->stop = &wavelan_close;
+ dev->hard_start_xmit = &wavelan_packet_xmit;
+ dev->get_stats = &wavelan_get_stats;
+ dev->set_multicast_list = &wavelan_set_multicast_list;
+#ifdef SET_MAC_ADDRESS
+ dev->set_mac_address = &wavelan_set_mac_address;
+#endif /* SET_MAC_ADDRESS */
+
+ /* Set the watchdog timer */
+ dev->tx_timeout = &wavelan_watchdog;
+ dev->watchdog_timeo = WATCHDOG_JIFFIES;
+ SET_ETHTOOL_OPS(dev, &ops);
+
+#ifdef WIRELESS_EXT /* If wireless extension exist in the kernel */
+ dev->wireless_handlers = &wavelan_handler_def;
+ lp->wireless_data.spy_data = &lp->spy_data;
+ dev->wireless_data = &lp->wireless_data;
+#endif
+
+ /* Other specific data */
+ dev->mtu = WAVELAN_MTU;
+
+ /* Register with Card Services */
+ client_reg.dev_info = &dev_info;
+ client_reg.EventMask =
+ CS_EVENT_REGISTRATION_COMPLETE |
+ CS_EVENT_CARD_INSERTION | CS_EVENT_CARD_REMOVAL |
+ CS_EVENT_RESET_PHYSICAL | CS_EVENT_CARD_RESET |
+ CS_EVENT_PM_SUSPEND | CS_EVENT_PM_RESUME;
+ client_reg.event_handler = &wavelan_event;
+ client_reg.Version = 0x0210;
+ client_reg.event_callback_args.client_data = link;
+
+#ifdef DEBUG_CONFIG_INFO
+ printk(KERN_DEBUG "wavelan_attach(): almost done, calling pcmcia_register_client\n");
+#endif
+
+ ret = pcmcia_register_client(&link->handle, &client_reg);
+ if(ret != 0)
+ {
+ cs_error(link->handle, RegisterClient, ret);
+ wavelan_detach(link);
+ return NULL;
+ }
+
+#ifdef DEBUG_CALLBACK_TRACE
+ printk(KERN_DEBUG "<- wavelan_attach()\n");
+#endif
+
+ return link;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * This deletes a driver "instance". The device is de-registered with
+ * Card Services. If it has been released, all local data structures
+ * are freed. Otherwise, the structures will be freed when the device
+ * is released.
+ */
+static void
+wavelan_detach(dev_link_t * link)
+{
+#ifdef DEBUG_CALLBACK_TRACE
+ printk(KERN_DEBUG "-> wavelan_detach(0x%p)\n", link);
+#endif
+
+ /*
+ * If the device is currently configured and active, we won't
+ * actually delete it yet. Instead, it is marked so that when the
+ * release() function is called, that will trigger a proper
+ * detach().
+ */
+ if(link->state & DEV_CONFIG)
+ {
+ /* Some others haven't done their job : give them another chance */
+ wv_pcmcia_release(link);
+ }
+
+ /* Break the link with Card Services */
+ if(link->handle)
+ pcmcia_deregister_client(link->handle);
+
+ /* Remove the interface data from the linked list */
+ if(dev_list == link)
+ dev_list = link->next;
+ else
+ {
+ dev_link_t * prev = dev_list;
+
+ while((prev != (dev_link_t *) NULL) && (prev->next != link))
+ prev = prev->next;
+
+ if(prev == (dev_link_t *) NULL)
+ {
+#ifdef DEBUG_CONFIG_ERRORS
+ printk(KERN_WARNING "wavelan_detach : Attempting to remove a nonexistent device.\n");
+#endif
+ return;
+ }
+
+ prev->next = link->next;
+ }
+
+ /* Free pieces */
+ if(link->priv)
+ {
+ struct net_device * dev = (struct net_device *) link->priv;
+
+ /* Remove ourselves from the kernel list of ethernet devices */
+ /* Warning : can't be called from interrupt, timer or wavelan_close() */
+ if (link->dev)
+ unregister_netdev(dev);
+ link->dev = NULL;
+ ((net_local *)netdev_priv(dev))->link = NULL;
+ ((net_local *)netdev_priv(dev))->dev = NULL;
+ free_netdev(dev);
+ }
+ kfree(link);
+
+#ifdef DEBUG_CALLBACK_TRACE
+ printk(KERN_DEBUG "<- wavelan_detach()\n");
+#endif
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * The card status event handler. Mostly, this schedules other stuff
+ * to run after an event is received. A CARD_REMOVAL event also sets
+ * some flags to discourage the net drivers from trying to talk to the
+ * card any more.
+ */
+static int
+wavelan_event(event_t event, /* The event received */
+ int priority,
+ event_callback_args_t * args)
+{
+ dev_link_t * link = (dev_link_t *) args->client_data;
+ struct net_device * dev = (struct net_device *) link->priv;
+
+#ifdef DEBUG_CALLBACK_TRACE
+ printk(KERN_DEBUG "->wavelan_event(): %s\n",
+ ((event == CS_EVENT_REGISTRATION_COMPLETE)?"registration complete" :
+ ((event == CS_EVENT_CARD_REMOVAL) ? "card removal" :
+ ((event == CS_EVENT_CARD_INSERTION) ? "card insertion" :
+ ((event == CS_EVENT_PM_SUSPEND) ? "pm suspend" :
+ ((event == CS_EVENT_RESET_PHYSICAL) ? "physical reset" :
+ ((event == CS_EVENT_PM_RESUME) ? "pm resume" :
+ ((event == CS_EVENT_CARD_RESET) ? "card reset" :
+ "unknown"))))))));
+#endif
+
+ switch(event)
+ {
+ case CS_EVENT_REGISTRATION_COMPLETE:
+#ifdef DEBUG_CONFIG_INFO
+ printk(KERN_DEBUG "wavelan_cs: registration complete\n");
+#endif
+ break;
+
+ case CS_EVENT_CARD_REMOVAL:
+ /* Oups ! The card is no more there */
+ link->state &= ~DEV_PRESENT;
+ if(link->state & DEV_CONFIG)
+ {
+ /* Accept no more transmissions */
+ netif_device_detach(dev);
+
+ /* Release the card */
+ wv_pcmcia_release(link);
+ }
+ break;
+
+ case CS_EVENT_CARD_INSERTION:
+ /* Reset and configure the card */
+ link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
+ if(wv_pcmcia_config(link) &&
+ wv_hw_config(dev))
+ wv_init_info(dev);
+ else
+ dev->irq = 0;
+ break;
+
+ case CS_EVENT_PM_SUSPEND:
+ /* NB: wavelan_close will be called, but too late, so we are
+ * obliged to close nicely the wavelan here. David, could you
+ * close the device before suspending them ? And, by the way,
+ * could you, on resume, add a "route add -net ..." after the
+ * ifconfig up ? Thanks... */
+
+ /* Stop receiving new messages and wait end of transmission */
+ wv_ru_stop(dev);
+
+ /* Power down the module */
+ hacr_write(dev->base_addr, HACR_DEFAULT & (~HACR_PWR_STAT));
+
+ /* The card is now suspended */
+ link->state |= DEV_SUSPEND;
+ /* Fall through... */
+ case CS_EVENT_RESET_PHYSICAL:
+ if(link->state & DEV_CONFIG)
+ {
+ if(link->open)
+ netif_device_detach(dev);
+ pcmcia_release_configuration(link->handle);
+ }
+ break;
+
+ case CS_EVENT_PM_RESUME:
+ link->state &= ~DEV_SUSPEND;
+ /* Fall through... */
+ case CS_EVENT_CARD_RESET:
+ if(link->state & DEV_CONFIG)
+ {
+ pcmcia_request_configuration(link->handle, &link->conf);
+ if(link->open) /* If RESET -> True, If RESUME -> False ? */
+ {
+ wv_hw_reset(dev);
+ netif_device_attach(dev);
+ }
+ }
+ break;
+ }
+
+#ifdef DEBUG_CALLBACK_TRACE
+ printk(KERN_DEBUG "<-wavelan_event()\n");
+#endif
+ return 0;
+}
+
+static struct pcmcia_driver wavelan_driver = {
+ .owner = THIS_MODULE,
+ .drv = {
+ .name = "wavelan_cs",
+ },
+ .attach = wavelan_attach,
+ .detach = wavelan_detach,
+};
+
+static int __init
+init_wavelan_cs(void)
+{
+ return pcmcia_register_driver(&wavelan_driver);
+}
+
+static void __exit
+exit_wavelan_cs(void)
+{
+ pcmcia_unregister_driver(&wavelan_driver);
+}
+
+module_init(init_wavelan_cs);
+module_exit(exit_wavelan_cs);
diff --git a/drivers/net/wireless/wavelan_cs.h b/drivers/net/wireless/wavelan_cs.h
new file mode 100644
index 0000000..29cff6d
--- /dev/null
+++ b/drivers/net/wireless/wavelan_cs.h
@@ -0,0 +1,386 @@
+/*
+ * Wavelan Pcmcia driver
+ *
+ * Jean II - HPLB '96
+ *
+ * Reorganization and extension of the driver.
+ * Original copyright follow. See wavelan_cs.h for details.
+ *
+ * This file contain the declarations of the Wavelan hardware. Note that
+ * the Pcmcia Wavelan include a i82593 controller (see definitions in
+ * file i82593.h).
+ *
+ * The main difference between the pcmcia hardware and the ISA one is
+ * the Ethernet Controller (i82593 instead of i82586). The i82593 allow
+ * only one send buffer. The PSA (Parameter Storage Area : EEprom for
+ * permanent storage of various info) is memory mapped, but not the
+ * MMI (Modem Management Interface).
+ */
+
+/*
+ * Definitions for the AT&T GIS (formerly NCR) WaveLAN PCMCIA card:
+ * An Ethernet-like radio transceiver controlled by an Intel 82593
+ * coprocessor.
+ *
+ *
+ ****************************************************************************
+ * Copyright 1995
+ * Anthony D. Joseph
+ * Massachusetts Institute of Technology
+ *
+ * Permission to use, copy, modify, and distribute this program
+ * for any purpose and without fee is hereby granted, provided
+ * that this copyright and permission notice appear on all copies
+ * and supporting documentation, the name of M.I.T. not be used
+ * in advertising or publicity pertaining to distribution of the
+ * program without specific prior permission, and notice be given
+ * in supporting documentation that copying and distribution is
+ * by permission of M.I.T. M.I.T. makes no representations about
+ * the suitability of this software for any purpose. It is pro-
+ * vided "as is" without express or implied warranty.
+ ****************************************************************************
+ *
+ *
+ * Credits:
+ * Special thanks to Jan Hoogendoorn of AT&T GIS Utrecht for
+ * providing extremely useful information about WaveLAN PCMCIA hardware
+ *
+ * This driver is based upon several other drivers, in particular:
+ * David Hinds' Linux driver for the PCMCIA 3c589 ethernet adapter
+ * Bruce Janson's Linux driver for the AT-bus WaveLAN adapter
+ * Anders Klemets' PCMCIA WaveLAN adapter driver
+ * Robert Morris' BSDI driver for the PCMCIA WaveLAN adapter
+ */
+
+#ifndef _WAVELAN_CS_H
+#define _WAVELAN_CS_H
+
+/************************** MAGIC NUMBERS ***************************/
+
+/* The detection of the wavelan card is made by reading the MAC address
+ * from the card and checking it. If you have a non AT&T product (OEM,
+ * like DEC RoamAbout, or Digital Ocean, Epson, ...), you must modify this
+ * part to accommodate your hardware...
+ */
+const unsigned char MAC_ADDRESSES[][3] =
+{
+ { 0x08, 0x00, 0x0E }, /* AT&T Wavelan (standard) & DEC RoamAbout */
+ { 0x08, 0x00, 0x6A }, /* AT&T Wavelan (alternate) */
+ { 0x00, 0x00, 0xE1 }, /* Hitachi Wavelan */
+ { 0x00, 0x60, 0x1D } /* Lucent Wavelan (another one) */
+ /* Add your card here and send me the patch ! */
+};
+
+/*
+ * Constants used to convert channels to frequencies
+ */
+
+/* Frequency available in the 2.0 modem, in units of 250 kHz
+ * (as read in the offset register of the dac area).
+ * Used to map channel numbers used by `wfreqsel' to frequencies
+ */
+const short channel_bands[] = { 0x30, 0x58, 0x64, 0x7A, 0x80, 0xA8,
+ 0xD0, 0xF0, 0xF8, 0x150 };
+
+/* Frequencies of the 1.0 modem (fixed frequencies).
+ * Use to map the PSA `subband' to a frequency
+ * Note : all frequencies apart from the first one need to be multiplied by 10
+ */
+const int fixed_bands[] = { 915e6, 2.425e8, 2.46e8, 2.484e8, 2.4305e8 };
+
+
+/*************************** PC INTERFACE ****************************/
+
+/* WaveLAN host interface definitions */
+
+#define LCCR(base) (base) /* LAN Controller Command Register */
+#define LCSR(base) (base) /* LAN Controller Status Register */
+#define HACR(base) (base+0x1) /* Host Adapter Command Register */
+#define HASR(base) (base+0x1) /* Host Adapter Status Register */
+#define PIORL(base) (base+0x2) /* Program I/O Register Low */
+#define RPLL(base) (base+0x2) /* Receive Pointer Latched Low */
+#define PIORH(base) (base+0x3) /* Program I/O Register High */
+#define RPLH(base) (base+0x3) /* Receive Pointer Latched High */
+#define PIOP(base) (base+0x4) /* Program I/O Port */
+#define MMR(base) (base+0x6) /* MMI Address Register */
+#define MMD(base) (base+0x7) /* MMI Data Register */
+
+/* Host Adaptor Command Register bit definitions */
+
+#define HACR_LOF (1 << 3) /* Lock Out Flag, toggle every 250ms */
+#define HACR_PWR_STAT (1 << 4) /* Power State, 1=active, 0=sleep */
+#define HACR_TX_DMA_RESET (1 << 5) /* Reset transmit DMA ptr on high */
+#define HACR_RX_DMA_RESET (1 << 6) /* Reset receive DMA ptr on high */
+#define HACR_ROM_WEN (1 << 7) /* EEPROM write enabled when true */
+
+#define HACR_RESET (HACR_TX_DMA_RESET | HACR_RX_DMA_RESET)
+#define HACR_DEFAULT (HACR_PWR_STAT)
+
+/* Host Adapter Status Register bit definitions */
+
+#define HASR_MMI_BUSY (1 << 2) /* MMI is busy when true */
+#define HASR_LOF (1 << 3) /* Lock out flag status */
+#define HASR_NO_CLK (1 << 4) /* active when modem not connected */
+
+/* Miscellaneous bit definitions */
+
+#define PIORH_SEL_TX (1 << 5) /* PIOR points to 0=rx/1=tx buffer */
+#define MMR_MMI_WR (1 << 0) /* Next MMI cycle is 0=read, 1=write */
+#define PIORH_MASK 0x1f /* only low 5 bits are significant */
+#define RPLH_MASK 0x1f /* only low 5 bits are significant */
+#define MMI_ADDR_MASK 0x7e /* Bits 1-6 of MMR are significant */
+
+/* Attribute Memory map */
+
+#define CIS_ADDR 0x0000 /* Card Information Status Register */
+#define PSA_ADDR 0x0e00 /* Parameter Storage Area address */
+#define EEPROM_ADDR 0x1000 /* EEPROM address (unused ?) */
+#define COR_ADDR 0x4000 /* Configuration Option Register */
+
+/* Configuration Option Register bit definitions */
+
+#define COR_CONFIG (1 << 0) /* Config Index, 0 when unconfigured */
+#define COR_SW_RESET (1 << 7) /* Software Reset on true */
+#define COR_LEVEL_IRQ (1 << 6) /* Level IRQ */
+
+/* Local Memory map */
+
+#define RX_BASE 0x0000 /* Receive memory, 8 kB */
+#define TX_BASE 0x2000 /* Transmit memory, 2 kB */
+#define UNUSED_BASE 0x2800 /* Unused, 22 kB */
+#define RX_SIZE (TX_BASE-RX_BASE) /* Size of receive area */
+#define RX_SIZE_SHIFT 6 /* Bits to shift in stop register */
+
+#define TRUE 1
+#define FALSE 0
+
+#define MOD_ENAL 1
+#define MOD_PROM 2
+
+/* Size of a MAC address */
+#define WAVELAN_ADDR_SIZE 6
+
+/* Maximum size of Wavelan packet */
+#define WAVELAN_MTU 1500
+
+#define MAXDATAZ (6 + 6 + 2 + WAVELAN_MTU)
+
+/********************** PARAMETER STORAGE AREA **********************/
+
+/*
+ * Parameter Storage Area (PSA).
+ */
+typedef struct psa_t psa_t;
+struct psa_t
+{
+ /* For the PCMCIA Adapter, locations 0x00-0x0F are unused and fixed at 00 */
+ unsigned char psa_io_base_addr_1; /* [0x00] Base address 1 ??? */
+ unsigned char psa_io_base_addr_2; /* [0x01] Base address 2 */
+ unsigned char psa_io_base_addr_3; /* [0x02] Base address 3 */
+ unsigned char psa_io_base_addr_4; /* [0x03] Base address 4 */
+ unsigned char psa_rem_boot_addr_1; /* [0x04] Remote Boot Address 1 */
+ unsigned char psa_rem_boot_addr_2; /* [0x05] Remote Boot Address 2 */
+ unsigned char psa_rem_boot_addr_3; /* [0x06] Remote Boot Address 3 */
+ unsigned char psa_holi_params; /* [0x07] HOst Lan Interface (HOLI) Parameters */
+ unsigned char psa_int_req_no; /* [0x08] Interrupt Request Line */
+ unsigned char psa_unused0[7]; /* [0x09-0x0F] unused */
+
+ unsigned char psa_univ_mac_addr[WAVELAN_ADDR_SIZE]; /* [0x10-0x15] Universal (factory) MAC Address */
+ unsigned char psa_local_mac_addr[WAVELAN_ADDR_SIZE]; /* [0x16-1B] Local MAC Address */
+ unsigned char psa_univ_local_sel; /* [0x1C] Universal Local Selection */
+#define PSA_UNIVERSAL 0 /* Universal (factory) */
+#define PSA_LOCAL 1 /* Local */
+ unsigned char psa_comp_number; /* [0x1D] Compatability Number: */
+#define PSA_COMP_PC_AT_915 0 /* PC-AT 915 MHz */
+#define PSA_COMP_PC_MC_915 1 /* PC-MC 915 MHz */
+#define PSA_COMP_PC_AT_2400 2 /* PC-AT 2.4 GHz */
+#define PSA_COMP_PC_MC_2400 3 /* PC-MC 2.4 GHz */
+#define PSA_COMP_PCMCIA_915 4 /* PCMCIA 915 MHz or 2.0 */
+ unsigned char psa_thr_pre_set; /* [0x1E] Modem Threshold Preset */
+ unsigned char psa_feature_select; /* [0x1F] Call code required (1=on) */
+#define PSA_FEATURE_CALL_CODE 0x01 /* Call code required (Japan) */
+ unsigned char psa_subband; /* [0x20] Subband */
+#define PSA_SUBBAND_915 0 /* 915 MHz or 2.0 */
+#define PSA_SUBBAND_2425 1 /* 2425 MHz */
+#define PSA_SUBBAND_2460 2 /* 2460 MHz */
+#define PSA_SUBBAND_2484 3 /* 2484 MHz */
+#define PSA_SUBBAND_2430_5 4 /* 2430.5 MHz */
+ unsigned char psa_quality_thr; /* [0x21] Modem Quality Threshold */
+ unsigned char psa_mod_delay; /* [0x22] Modem Delay ??? (reserved) */
+ unsigned char psa_nwid[2]; /* [0x23-0x24] Network ID */
+ unsigned char psa_nwid_select; /* [0x25] Network ID Select On Off */
+ unsigned char psa_encryption_select; /* [0x26] Encryption On Off */
+ unsigned char psa_encryption_key[8]; /* [0x27-0x2E] Encryption Key */
+ unsigned char psa_databus_width; /* [0x2F] AT bus width select 8/16 */
+ unsigned char psa_call_code[8]; /* [0x30-0x37] (Japan) Call Code */
+ unsigned char psa_nwid_prefix[2]; /* [0x38-0x39] Roaming domain */
+ unsigned char psa_reserved[2]; /* [0x3A-0x3B] Reserved - fixed 00 */
+ unsigned char psa_conf_status; /* [0x3C] Conf Status, bit 0=1:config*/
+ unsigned char psa_crc[2]; /* [0x3D] CRC-16 over PSA */
+ unsigned char psa_crc_status; /* [0x3F] CRC Valid Flag */
+};
+
+/* Size for structure checking (if padding is correct) */
+#define PSA_SIZE 64
+
+/* Calculate offset of a field in the above structure
+ * Warning : only even addresses are used */
+#define psaoff(p,f) ((unsigned short) ((void *)(&((psa_t *) ((void *) NULL + (p)))->f) - (void *) NULL))
+
+/******************** MODEM MANAGEMENT INTERFACE ********************/
+
+/*
+ * Modem Management Controller (MMC) write structure.
+ */
+typedef struct mmw_t mmw_t;
+struct mmw_t
+{
+ unsigned char mmw_encr_key[8]; /* encryption key */
+ unsigned char mmw_encr_enable; /* enable/disable encryption */
+#define MMW_ENCR_ENABLE_MODE 0x02 /* Mode of security option */
+#define MMW_ENCR_ENABLE_EN 0x01 /* Enable security option */
+ unsigned char mmw_unused0[1]; /* unused */
+ unsigned char mmw_des_io_invert; /* Encryption option */
+#define MMW_DES_IO_INVERT_RES 0x0F /* Reserved */
+#define MMW_DES_IO_INVERT_CTRL 0xF0 /* Control ??? (set to 0) */
+ unsigned char mmw_unused1[5]; /* unused */
+ unsigned char mmw_loopt_sel; /* looptest selection */
+#define MMW_LOOPT_SEL_DIS_NWID 0x40 /* disable NWID filtering */
+#define MMW_LOOPT_SEL_INT 0x20 /* activate Attention Request */
+#define MMW_LOOPT_SEL_LS 0x10 /* looptest w/o collision avoidance */
+#define MMW_LOOPT_SEL_LT3A 0x08 /* looptest 3a */
+#define MMW_LOOPT_SEL_LT3B 0x04 /* looptest 3b */
+#define MMW_LOOPT_SEL_LT3C 0x02 /* looptest 3c */
+#define MMW_LOOPT_SEL_LT3D 0x01 /* looptest 3d */
+ unsigned char mmw_jabber_enable; /* jabber timer enable */
+ /* Abort transmissions > 200 ms */
+ unsigned char mmw_freeze; /* freeze / unfreeeze signal level */
+ /* 0 : signal level & qual updated for every new message, 1 : frozen */
+ unsigned char mmw_anten_sel; /* antenna selection */
+#define MMW_ANTEN_SEL_SEL 0x01 /* direct antenna selection */
+#define MMW_ANTEN_SEL_ALG_EN 0x02 /* antenna selection algo. enable */
+ unsigned char mmw_ifs; /* inter frame spacing */
+ /* min time between transmission in bit periods (.5 us) - bit 0 ignored */
+ unsigned char mmw_mod_delay; /* modem delay (synchro) */
+ unsigned char mmw_jam_time; /* jamming time (after collision) */
+ unsigned char mmw_unused2[1]; /* unused */
+ unsigned char mmw_thr_pre_set; /* level threshold preset */
+ /* Discard all packet with signal < this value (4) */
+ unsigned char mmw_decay_prm; /* decay parameters */
+ unsigned char mmw_decay_updat_prm; /* decay update parameterz */
+ unsigned char mmw_quality_thr; /* quality (z-quotient) threshold */
+ /* Discard all packet with quality < this value (3) */
+ unsigned char mmw_netw_id_l; /* NWID low order byte */
+ unsigned char mmw_netw_id_h; /* NWID high order byte */
+ /* Network ID or Domain : create virtual net on the air */
+
+ /* 2.0 Hardware extension - frequency selection support */
+ unsigned char mmw_mode_select; /* for analog tests (set to 0) */
+ unsigned char mmw_unused3[1]; /* unused */
+ unsigned char mmw_fee_ctrl; /* frequency eeprom control */
+#define MMW_FEE_CTRL_PRE 0x10 /* Enable protected instructions */
+#define MMW_FEE_CTRL_DWLD 0x08 /* Download eeprom to mmc */
+#define MMW_FEE_CTRL_CMD 0x07 /* EEprom commands : */
+#define MMW_FEE_CTRL_READ 0x06 /* Read */
+#define MMW_FEE_CTRL_WREN 0x04 /* Write enable */
+#define MMW_FEE_CTRL_WRITE 0x05 /* Write data to address */
+#define MMW_FEE_CTRL_WRALL 0x04 /* Write data to all addresses */
+#define MMW_FEE_CTRL_WDS 0x04 /* Write disable */
+#define MMW_FEE_CTRL_PRREAD 0x16 /* Read addr from protect register */
+#define MMW_FEE_CTRL_PREN 0x14 /* Protect register enable */
+#define MMW_FEE_CTRL_PRCLEAR 0x17 /* Unprotect all registers */
+#define MMW_FEE_CTRL_PRWRITE 0x15 /* Write addr in protect register */
+#define MMW_FEE_CTRL_PRDS 0x14 /* Protect register disable */
+ /* Never issue this command (PRDS) : it's irreversible !!! */
+
+ unsigned char mmw_fee_addr; /* EEprom address */
+#define MMW_FEE_ADDR_CHANNEL 0xF0 /* Select the channel */
+#define MMW_FEE_ADDR_OFFSET 0x0F /* Offset in channel data */
+#define MMW_FEE_ADDR_EN 0xC0 /* FEE_CTRL enable operations */
+#define MMW_FEE_ADDR_DS 0x00 /* FEE_CTRL disable operations */
+#define MMW_FEE_ADDR_ALL 0x40 /* FEE_CTRL all operations */
+#define MMW_FEE_ADDR_CLEAR 0xFF /* FEE_CTRL clear operations */
+
+ unsigned char mmw_fee_data_l; /* Write data to EEprom */
+ unsigned char mmw_fee_data_h; /* high octet */
+ unsigned char mmw_ext_ant; /* Setting for external antenna */
+#define MMW_EXT_ANT_EXTANT 0x01 /* Select external antenna */
+#define MMW_EXT_ANT_POL 0x02 /* Polarity of the antenna */
+#define MMW_EXT_ANT_INTERNAL 0x00 /* Internal antenna */
+#define MMW_EXT_ANT_EXTERNAL 0x03 /* External antenna */
+#define MMW_EXT_ANT_IQ_TEST 0x1C /* IQ test pattern (set to 0) */
+};
+
+/* Size for structure checking (if padding is correct) */
+#define MMW_SIZE 37
+
+/* Calculate offset of a field in the above structure */
+#define mmwoff(p,f) (unsigned short)((void *)(&((mmw_t *)((void *)0 + (p)))->f) - (void *)0)
+
+
+/*
+ * Modem Management Controller (MMC) read structure.
+ */
+typedef struct mmr_t mmr_t;
+struct mmr_t
+{
+ unsigned char mmr_unused0[8]; /* unused */
+ unsigned char mmr_des_status; /* encryption status */
+ unsigned char mmr_des_avail; /* encryption available (0x55 read) */
+#define MMR_DES_AVAIL_DES 0x55 /* DES available */
+#define MMR_DES_AVAIL_AES 0x33 /* AES (AT&T) available */
+ unsigned char mmr_des_io_invert; /* des I/O invert register */
+ unsigned char mmr_unused1[5]; /* unused */
+ unsigned char mmr_dce_status; /* DCE status */
+#define MMR_DCE_STATUS_RX_BUSY 0x01 /* receiver busy */
+#define MMR_DCE_STATUS_LOOPT_IND 0x02 /* loop test indicated */
+#define MMR_DCE_STATUS_TX_BUSY 0x04 /* transmitter on */
+#define MMR_DCE_STATUS_JBR_EXPIRED 0x08 /* jabber timer expired */
+#define MMR_DCE_STATUS 0x0F /* mask to get the bits */
+ unsigned char mmr_dsp_id; /* DSP id (AA = Daedalus rev A) */
+ unsigned char mmr_unused2[2]; /* unused */
+ unsigned char mmr_correct_nwid_l; /* # of correct NWID's rxd (low) */
+ unsigned char mmr_correct_nwid_h; /* # of correct NWID's rxd (high) */
+ /* Warning : Read high order octet first !!! */
+ unsigned char mmr_wrong_nwid_l; /* # of wrong NWID's rxd (low) */
+ unsigned char mmr_wrong_nwid_h; /* # of wrong NWID's rxd (high) */
+ unsigned char mmr_thr_pre_set; /* level threshold preset */
+#define MMR_THR_PRE_SET 0x3F /* level threshold preset */
+#define MMR_THR_PRE_SET_CUR 0x80 /* Current signal above it */
+ unsigned char mmr_signal_lvl; /* signal level */
+#define MMR_SIGNAL_LVL 0x3F /* signal level */
+#define MMR_SIGNAL_LVL_VALID 0x80 /* Updated since last read */
+ unsigned char mmr_silence_lvl; /* silence level (noise) */
+#define MMR_SILENCE_LVL 0x3F /* silence level */
+#define MMR_SILENCE_LVL_VALID 0x80 /* Updated since last read */
+ unsigned char mmr_sgnl_qual; /* signal quality */
+#define MMR_SGNL_QUAL 0x0F /* signal quality */
+#define MMR_SGNL_QUAL_ANT 0x80 /* current antenna used */
+ unsigned char mmr_netw_id_l; /* NWID low order byte ??? */
+ unsigned char mmr_unused3[3]; /* unused */
+
+ /* 2.0 Hardware extension - frequency selection support */
+ unsigned char mmr_fee_status; /* Status of frequency eeprom */
+#define MMR_FEE_STATUS_ID 0xF0 /* Modem revision id */
+#define MMR_FEE_STATUS_DWLD 0x08 /* Download in progress */
+#define MMR_FEE_STATUS_BUSY 0x04 /* EEprom busy */
+ unsigned char mmr_unused4[1]; /* unused */
+ unsigned char mmr_fee_data_l; /* Read data from eeprom (low) */
+ unsigned char mmr_fee_data_h; /* Read data from eeprom (high) */
+};
+
+/* Size for structure checking (if padding is correct) */
+#define MMR_SIZE 36
+
+/* Calculate offset of a field in the above structure */
+#define mmroff(p,f) (unsigned short)((void *)(&((mmr_t *)((void *)0 + (p)))->f) - (void *)0)
+
+
+/* Make the two above structures one */
+typedef union mm_t
+{
+ struct mmw_t w; /* Write to the mmc */
+ struct mmr_t r; /* Read from the mmc */
+} mm_t;
+
+#endif /* _WAVELAN_CS_H */
diff --git a/drivers/net/wireless/wavelan_cs.p.h b/drivers/net/wireless/wavelan_cs.p.h
new file mode 100644
index 0000000..ea2ef8d
--- /dev/null
+++ b/drivers/net/wireless/wavelan_cs.p.h
@@ -0,0 +1,813 @@
+/*
+ * Wavelan Pcmcia driver
+ *
+ * Jean II - HPLB '96
+ *
+ * Reorganisation and extension of the driver.
+ *
+ * This file contain all definition and declarations necessary for the
+ * wavelan pcmcia driver. This file is a private header, so it should
+ * be included only on wavelan_cs.c !!!
+ */
+
+#ifndef WAVELAN_CS_P_H
+#define WAVELAN_CS_P_H
+
+/************************** DOCUMENTATION **************************/
+/*
+ * This driver provide a Linux interface to the Wavelan Pcmcia hardware
+ * The Wavelan is a product of Lucent (http://www.wavelan.com/).
+ * This division was formerly part of NCR and then AT&T.
+ * Wavelan are also distributed by DEC (RoamAbout DS)...
+ *
+ * To know how to use this driver, read the PCMCIA HOWTO.
+ * If you want to exploit the many other fonctionalities, look comments
+ * in the code...
+ *
+ * This driver is the result of the effort of many peoples (see below).
+ */
+
+/* ------------------------ SPECIFIC NOTES ------------------------ */
+/*
+ * Web page
+ * --------
+ * I try to maintain a web page with the Wireless LAN Howto at :
+ * http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Wavelan.html
+ *
+ * SMP
+ * ---
+ * We now are SMP compliant (I eventually fixed the remaining bugs).
+ * The driver has been tested on a dual P6-150 and survived my usual
+ * set of torture tests.
+ * Anyway, I spent enough time chasing interrupt re-entrancy during
+ * errors or reconfigure, and I designed the locked/unlocked sections
+ * of the driver with great care, and with the recent addition of
+ * the spinlock (thanks to the new API), we should be quite close to
+ * the truth.
+ * The SMP/IRQ locking is quite coarse and conservative (i.e. not fast),
+ * but better safe than sorry (especially at 2 Mb/s ;-).
+ *
+ * I have also looked into disabling only our interrupt on the card
+ * (via HACR) instead of all interrupts in the processor (via cli),
+ * so that other driver are not impacted, and it look like it's
+ * possible, but it's very tricky to do right (full of races). As
+ * the gain would be mostly for SMP systems, it can wait...
+ *
+ * Debugging and options
+ * ---------------------
+ * You will find below a set of '#define" allowing a very fine control
+ * on the driver behaviour and the debug messages printed.
+ * The main options are :
+ * o WAVELAN_ROAMING, for the experimental roaming support.
+ * o SET_PSA_CRC, to have your card correctly recognised by
+ * an access point and the Point-to-Point diagnostic tool.
+ * o USE_PSA_CONFIG, to read configuration from the PSA (EEprom)
+ * (otherwise we always start afresh with some defaults)
+ *
+ * wavelan_cs.o is darn too big
+ * -------------------------
+ * That's true ! There is a very simple way to reduce the driver
+ * object by 33% (yes !). Comment out the following line :
+ * #include <linux/wireless.h>
+ * Other compile options can also reduce the size of it...
+ *
+ * MAC address and hardware detection :
+ * ----------------------------------
+ * The detection code of the wavelan chech that the first 3
+ * octets of the MAC address fit the company code. This type of
+ * detection work well for AT&T cards (because the AT&T code is
+ * hardcoded in wavelan_cs.h), but of course will fail for other
+ * manufacturer.
+ *
+ * If you are sure that your card is derived from the wavelan,
+ * here is the way to configure it :
+ * 1) Get your MAC address
+ * a) With your card utilities (wfreqsel, instconf, ...)
+ * b) With the driver :
+ * o compile the kernel with DEBUG_CONFIG_INFO enabled
+ * o Boot and look the card messages
+ * 2) Set your MAC code (3 octets) in MAC_ADDRESSES[][3] (wavelan_cs.h)
+ * 3) Compile & verify
+ * 4) Send me the MAC code - I will include it in the next version...
+ *
+ */
+
+/* --------------------- WIRELESS EXTENSIONS --------------------- */
+/*
+ * This driver is the first one to support "wireless extensions".
+ * This set of extensions provide you some way to control the wireless
+ * caracteristics of the hardware in a standard way and support for
+ * applications for taking advantage of it (like Mobile IP).
+ *
+ * You will need to enable the CONFIG_NET_RADIO define in the kernel
+ * configuration to enable the wireless extensions (this is the one
+ * giving access to the radio network device choice).
+ *
+ * It might also be a good idea as well to fetch the wireless tools to
+ * configure the device and play a bit.
+ */
+
+/* ---------------------------- FILES ---------------------------- */
+/*
+ * wavelan_cs.c : The actual code for the driver - C functions
+ *
+ * wavelan_cs.p.h : Private header : local types / vars for the driver
+ *
+ * wavelan_cs.h : Description of the hardware interface & structs
+ *
+ * i82593.h : Description if the Ethernet controller
+ */
+
+/* --------------------------- HISTORY --------------------------- */
+/*
+ * The history of the Wavelan drivers is as complicated as history of
+ * the Wavelan itself (NCR -> AT&T -> Lucent).
+ *
+ * All started with Anders Klemets <klemets@paul.rutgers.edu>,
+ * writting a Wavelan ISA driver for the MACH microkernel. Girish
+ * Welling <welling@paul.rutgers.edu> had also worked on it.
+ * Keith Moore modify this for the Pcmcia hardware.
+ *
+ * Robert Morris <rtm@das.harvard.edu> port these two drivers to BSDI
+ * and add specific Pcmcia support (there is currently no equivalent
+ * of the PCMCIA package under BSD...).
+ *
+ * Jim Binkley <jrb@cs.pdx.edu> port both BSDI drivers to FreeBSD.
+ *
+ * Bruce Janson <bruce@cs.usyd.edu.au> port the BSDI ISA driver to Linux.
+ *
+ * Anthony D. Joseph <adj@lcs.mit.edu> started modify Bruce driver
+ * (with help of the BSDI PCMCIA driver) for PCMCIA.
+ * Yunzhou Li <yunzhou@strat.iol.unh.edu> finished is work.
+ * Joe Finney <joe@comp.lancs.ac.uk> patched the driver to start
+ * correctly 2.00 cards (2.4 GHz with frequency selection).
+ * David Hinds <dahinds@users.sourceforge.net> integrated the whole in his
+ * Pcmcia package (+ bug corrections).
+ *
+ * I (Jean Tourrilhes - jt@hplb.hpl.hp.com) then started to make some
+ * patchs to the Pcmcia driver. After, I added code in the ISA driver
+ * for Wireless Extensions and full support of frequency selection
+ * cards. Now, I'm doing the same to the Pcmcia driver + some
+ * reorganisation.
+ * Loeke Brederveld <lbrederv@wavelan.com> from Lucent has given me
+ * much needed informations on the Wavelan hardware.
+ */
+
+/* By the way : for the copyright & legal stuff :
+ * Almost everybody wrote code under GNU or BSD license (or alike),
+ * and want that their original copyright remain somewhere in the
+ * code (for myself, I go with the GPL).
+ * Nobody want to take responsibility for anything, except the fame...
+ */
+
+/* --------------------------- CREDITS --------------------------- */
+/*
+ * Credits:
+ * Special thanks to Jan Hoogendoorn of AT&T GIS Utrecht and
+ * Loeke Brederveld of Lucent for providing extremely useful
+ * information about WaveLAN PCMCIA hardware
+ *
+ * This driver is based upon several other drivers, in particular:
+ * David Hinds' Linux driver for the PCMCIA 3c589 ethernet adapter
+ * Bruce Janson's Linux driver for the AT-bus WaveLAN adapter
+ * Anders Klemets' PCMCIA WaveLAN adapter driver
+ * Robert Morris' BSDI driver for the PCMCIA WaveLAN adapter
+ *
+ * Additional Credits:
+ *
+ * This software was originally developed under Linux 1.2.3
+ * (Slackware 2.0 distribution).
+ * And then under Linux 2.0.x (Debian 1.1 -> 2.2 - pcmcia 2.8.18+)
+ * with an HP OmniBook 4000 and then a 5500.
+ *
+ * It is based on other device drivers and information either written
+ * or supplied by:
+ * James Ashton (jaa101@syseng.anu.edu.au),
+ * Ajay Bakre (bakre@paul.rutgers.edu),
+ * Donald Becker (becker@super.org),
+ * Jim Binkley <jrb@cs.pdx.edu>,
+ * Loeke Brederveld <lbrederv@wavelan.com>,
+ * Allan Creighton (allanc@cs.su.oz.au),
+ * Brent Elphick <belphick@uwaterloo.ca>,
+ * Joe Finney <joe@comp.lancs.ac.uk>,
+ * Matthew Geier (matthew@cs.su.oz.au),
+ * Remo di Giovanni (remo@cs.su.oz.au),
+ * Mark Hagan (mhagan@wtcpost.daytonoh.NCR.COM),
+ * David Hinds <dahinds@users.sourceforge.net>,
+ * Jan Hoogendoorn (c/o marteijn@lucent.com),
+ * Bruce Janson <bruce@cs.usyd.edu.au>,
+ * Anthony D. Joseph <adj@lcs.mit.edu>,
+ * Anders Klemets (klemets@paul.rutgers.edu),
+ * Yunzhou Li <yunzhou@strat.iol.unh.edu>,
+ * Marc Meertens (mmeertens@lucent.com),
+ * Keith Moore,
+ * Robert Morris (rtm@das.harvard.edu),
+ * Ian Parkin (ian@cs.su.oz.au),
+ * John Rosenberg (johnr@cs.su.oz.au),
+ * George Rossi (george@phm.gov.au),
+ * Arthur Scott (arthur@cs.su.oz.au),
+ * Stanislav Sinyagin <stas@isf.ru>
+ * Peter Storey,
+ * Jean Tourrilhes <jt@hpl.hp.com>,
+ * Girish Welling (welling@paul.rutgers.edu)
+ * Clark Woodworth <clark@hiway1.exit109.com>
+ * Yongguang Zhang <ygz@isl.hrl.hac.com>...
+ */
+
+/* ------------------------- IMPROVEMENTS ------------------------- */
+/*
+ * I proudly present :
+ *
+ * Changes made in 2.8.22 :
+ * ----------------------
+ * - improved wv_set_multicast_list
+ * - catch spurious interrupt
+ * - correct release of the device
+ *
+ * Changes mades in release :
+ * ------------------------
+ * - Reorganisation of the code, function name change
+ * - Creation of private header (wavelan_cs.h)
+ * - Reorganised debug messages
+ * - More comments, history, ...
+ * - Configure earlier (in "insert" instead of "open")
+ * and do things only once
+ * - mmc_init : configure the PSA if not done
+ * - mmc_init : 2.00 detection better code for 2.00 init
+ * - better info at startup
+ * - Correct a HUGE bug (volatile & uncalibrated busy loop)
+ * in wv_82593_cmd => config speedup
+ * - Stop receiving & power down on close (and power up on open)
+ * use "ifconfig down" & "ifconfig up ; route add -net ..."
+ * - Send packets : add watchdog instead of pooling
+ * - Receive : check frame wrap around & try to recover some frames
+ * - wavelan_set_multicast_list : avoid reset
+ * - add wireless extensions (ioctl & get_wireless_stats)
+ * get/set nwid/frequency on fly, info for /proc/net/wireless
+ * - Suppress useless stuff from lp (net_local), but add link
+ * - More inlines
+ * - Lot of others minor details & cleanups
+ *
+ * Changes made in second release :
+ * ------------------------------
+ * - Optimise wv_85893_reconfig stuff, fix potential problems
+ * - Change error values for ioctl
+ * - Non blocking wv_ru_stop() + call wv_reset() in case of problems
+ * - Remove development printk from wavelan_watchdog()
+ * - Remove of the watchdog to wavelan_close instead of wavelan_release
+ * fix potential problems...
+ * - Start debugging suspend stuff (but it's still a bit weird)
+ * - Debug & optimize dump header/packet in Rx & Tx (debug)
+ * - Use "readb" and "writeb" to be kernel 2.1 compliant
+ * - Better handling of bogus interrupts
+ * - Wireless extension : SETSPY and GETSPY
+ * - Remove old stuff (stats - for those needing it, just ask me...)
+ * - Make wireless extensions optional
+ *
+ * Changes made in third release :
+ * -----------------------------
+ * - cleanups & typos
+ * - modif wireless ext (spy -> only one pointer)
+ * - new private ioctl to set/get quality & level threshold
+ * - Init : correct default value of level threshold for pcmcia
+ * - kill watchdog in hw_reset
+ * - more 2.1 support (copy_to/from_user instead of memcpy_to/fromfs)
+ * - Add message level (debug stuff in /var/adm/debug & errors not
+ * displayed at console and still in /var/adm/messages)
+ *
+ * Changes made in fourth release :
+ * ------------------------------
+ * - multicast support (yes !) thanks to Yongguang Zhang.
+ *
+ * Changes made in fifth release (2.9.0) :
+ * -------------------------------------
+ * - Revisited multicast code (it was mostly wrong).
+ * - protect code in wv_82593_reconfig with dev->tbusy (oups !)
+ *
+ * Changes made in sixth release (2.9.1a) :
+ * --------------------------------------
+ * - Change the detection code for multi manufacturer code support
+ * - Correct bug (hang kernel) in init when we were "rejecting" a card
+ *
+ * Changes made in seventh release (2.9.1b) :
+ * ----------------------------------------
+ * - Update to wireless extensions changes
+ * - Silly bug in card initial configuration (psa_conf_status)
+ *
+ * Changes made in eigth release :
+ * -----------------------------
+ * - Small bug in debug code (probably not the last one...)
+ * - 1.2.13 support (thanks to Clark Woodworth)
+ *
+ * Changes made for release in 2.9.2b :
+ * ----------------------------------
+ * - Level threshold is now a standard wireless extension (version 4 !)
+ * - modules parameters types for kernel > 2.1.17
+ * - updated man page
+ * - Others cleanup from David Hinds
+ *
+ * Changes made for release in 2.9.5 :
+ * ---------------------------------
+ * - byte count stats (courtesy of David Hinds)
+ * - Remove dev_tint stuff (courtesy of David Hinds)
+ * - Others cleanup from David Hinds
+ * - Encryption setting from Brent Elphick (thanks a lot !)
+ * - 'base' to 'u_long' for the Alpha (thanks to Stanislav Sinyagin)
+ *
+ * Changes made for release in 2.9.6 :
+ * ---------------------------------
+ * - fix bug : no longuer disable watchdog in case of bogus interrupt
+ * - increase timeout in config code for picky hardware
+ * - mask unused bits in status (Wireless Extensions)
+ *
+ * Changes integrated by Justin Seger <jseger@MIT.EDU> & David Hinds :
+ * -----------------------------------------------------------------
+ * - Roaming "hack" from Joe Finney <joe@comp.lancs.ac.uk>
+ * - PSA CRC code from Bob Gray <rgray@bald.cs.dartmouth.edu>
+ * - Better initialisation of the i82593 controller
+ * from Joseph K. O'Sullivan <josullvn+@cs.cmu.edu>
+ *
+ * Changes made for release in 3.0.10 :
+ * ----------------------------------
+ * - Fix eject "hang" of the driver under 2.2.X :
+ * o create wv_flush_stale_links()
+ * o Rename wavelan_release to wv_pcmcia_release & move up
+ * o move unregister_netdev to wavelan_detach()
+ * o wavelan_release() no longer call wavelan_detach()
+ * o Suppress "release" timer
+ * o Other cleanups & fixes
+ * - New MAC address in the probe
+ * - Reorg PSA_CRC code (endian neutral & cleaner)
+ * - Correct initialisation of the i82593 from Lucent manual
+ * - Put back the watchdog, with larger timeout
+ * - TRANSMIT_NO_CRC is a "normal" error, so recover from it
+ * from Derrick J Brashear <shadow@dementia.org>
+ * - Better handling of TX and RX normal failure conditions
+ * - #ifdef out all the roaming code
+ * - Add ESSID & "AP current address" ioctl stubs
+ * - General cleanup of the code
+ *
+ * Changes made for release in 3.0.13 :
+ * ----------------------------------
+ * - Re-enable compilation of roaming code by default, but with
+ * do_roaming = 0
+ * - Nuke `nwid=nwid^ntohs(beacon->domain_id)' in wl_roam_gather
+ * at the demand of John Carol Langford <jcl@gs176.sp.cs.cmu.edu>
+ * - Introduced WAVELAN_ROAMING_EXT for incomplete ESSID stuff.
+ *
+ * Changes made for release in 3.0.15 :
+ * ----------------------------------
+ * - Change e-mail and web page addresses
+ * - Watchdog timer is now correctly expressed in HZ, not in jiffies
+ * - Add channel number to the list of frequencies in range
+ * - Add the (short) list of bit-rates in range
+ * - Developp a new sensitivity... (sens.value & sens.fixed)
+ *
+ * Changes made for release in 3.1.2 :
+ * ---------------------------------
+ * - Fix check for root permission (break instead of exit)
+ * - New nwid & encoding setting (Wireless Extension 9)
+ *
+ * Changes made for release in 3.1.12 :
+ * ----------------------------------
+ * - reworked wv_82593_cmd to avoid using the IRQ handler and doing
+ * ugly things with interrupts.
+ * - Add IRQ protection in 82593_config/ru_start/ru_stop/watchdog
+ * - Update to new network API (softnet - 2.3.43) :
+ * o replace dev->tbusy (David + me)
+ * o replace dev->tstart (David + me)
+ * o remove dev->interrupt (David)
+ * o add SMP locking via spinlock in splxx (me)
+ * o add spinlock in interrupt handler (me)
+ * o use kernel watchdog instead of ours (me)
+ * o verify that all the changes make sense and work (me)
+ * - Re-sync kernel/pcmcia versions (not much actually)
+ * - A few other cleanups (David & me)...
+ *
+ * Changes made for release in 3.1.22 :
+ * ----------------------------------
+ * - Check that SMP works, remove annoying log message
+ *
+ * Changes made for release in 3.1.24 :
+ * ----------------------------------
+ * - Fix unfrequent card lockup when watchdog was reseting the hardware :
+ * o control first busy loop in wv_82593_cmd()
+ * o Extend spinlock protection in wv_hw_config()
+ *
+ * Changes made for release in 3.1.33 :
+ * ----------------------------------
+ * - Optional use new driver API for Wireless Extensions :
+ * o got rid of wavelan_ioctl()
+ * o use a bunch of iw_handler instead
+ *
+ * Changes made for release in 3.2.1 :
+ * ---------------------------------
+ * - Set dev->trans_start to avoid filling the logs
+ * (and generating useless abort commands)
+ * - Avoid deadlocks in mmc_out()/mmc_in()
+ *
+ * Wishes & dreams:
+ * ----------------
+ * - Cleanup and integrate the roaming code
+ * (std debug, set DomainID, decay avg and co...)
+ */
+
+/***************************** INCLUDES *****************************/
+
+/* Linux headers that we need */
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/in.h>
+#include <linux/delay.h>
+#include <linux/bitops.h>
+#include <asm/uaccess.h>
+#include <asm/io.h>
+#include <asm/system.h>
+
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/if_arp.h>
+#include <linux/ioport.h>
+#include <linux/fcntl.h>
+#include <linux/ethtool.h>
+
+#ifdef CONFIG_NET_RADIO
+#include <linux/wireless.h> /* Wireless extensions */
+#include <net/iw_handler.h> /* New driver API */
+#endif
+
+/* Pcmcia headers that we need */
+#include <pcmcia/cs_types.h>
+#include <pcmcia/cs.h>
+#include <pcmcia/cistpl.h>
+#include <pcmcia/cisreg.h>
+#include <pcmcia/ds.h>
+#include <pcmcia/version.h>
+
+/* Wavelan declarations */
+#include "i82593.h" /* Definitions for the Intel chip */
+
+#include "wavelan_cs.h" /* Others bits of the hardware */
+
+/************************** DRIVER OPTIONS **************************/
+/*
+ * `#define' or `#undef' the following constant to change the behaviour
+ * of the driver...
+ */
+#define WAVELAN_ROAMING /* Include experimental roaming code */
+#undef WAVELAN_ROAMING_EXT /* Enable roaming wireless extensions */
+#undef SET_PSA_CRC /* Set the CRC in PSA (slower) */
+#define USE_PSA_CONFIG /* Use info from the PSA */
+#undef STRUCT_CHECK /* Verify padding of structures */
+#undef EEPROM_IS_PROTECTED /* Doesn't seem to be necessary */
+#define MULTICAST_AVOID /* Avoid extra multicast (I'm sceptical) */
+#undef SET_MAC_ADDRESS /* Experimental */
+
+#ifdef WIRELESS_EXT /* If wireless extension exist in the kernel */
+/* Warning : these stuff will slow down the driver... */
+#define WIRELESS_SPY /* Enable spying addresses */
+#undef HISTOGRAM /* Enable histogram of sig level... */
+#endif
+
+/****************************** DEBUG ******************************/
+
+#undef DEBUG_MODULE_TRACE /* Module insertion/removal */
+#undef DEBUG_CALLBACK_TRACE /* Calls made by Linux */
+#undef DEBUG_INTERRUPT_TRACE /* Calls to handler */
+#undef DEBUG_INTERRUPT_INFO /* type of interrupt & so on */
+#define DEBUG_INTERRUPT_ERROR /* problems */
+#undef DEBUG_CONFIG_TRACE /* Trace the config functions */
+#undef DEBUG_CONFIG_INFO /* What's going on... */
+#define DEBUG_CONFIG_ERRORS /* Errors on configuration */
+#undef DEBUG_TX_TRACE /* Transmission calls */
+#undef DEBUG_TX_INFO /* Header of the transmitted packet */
+#undef DEBUG_TX_FAIL /* Normal failure conditions */
+#define DEBUG_TX_ERROR /* Unexpected conditions */
+#undef DEBUG_RX_TRACE /* Transmission calls */
+#undef DEBUG_RX_INFO /* Header of the transmitted packet */
+#undef DEBUG_RX_FAIL /* Normal failure conditions */
+#define DEBUG_RX_ERROR /* Unexpected conditions */
+#undef DEBUG_PACKET_DUMP /* Dump packet on the screen */
+#undef DEBUG_IOCTL_TRACE /* Misc call by Linux */
+#undef DEBUG_IOCTL_INFO /* Various debug info */
+#define DEBUG_IOCTL_ERROR /* What's going wrong */
+#define DEBUG_BASIC_SHOW /* Show basic startup info */
+#undef DEBUG_VERSION_SHOW /* Print version info */
+#undef DEBUG_PSA_SHOW /* Dump psa to screen */
+#undef DEBUG_MMC_SHOW /* Dump mmc to screen */
+#undef DEBUG_SHOW_UNUSED /* Show also unused fields */
+#undef DEBUG_I82593_SHOW /* Show i82593 status */
+#undef DEBUG_DEVICE_SHOW /* Show device parameters */
+
+/************************ CONSTANTS & MACROS ************************/
+
+#ifdef DEBUG_VERSION_SHOW
+static const char *version = "wavelan_cs.c : v24 (SMP + wireless extensions) 11/1/02\n";
+#endif
+
+/* Watchdog temporisation */
+#define WATCHDOG_JIFFIES (256*HZ/100)
+
+/* Fix a bug in some old wireless extension definitions */
+#ifndef IW_ESSID_MAX_SIZE
+#define IW_ESSID_MAX_SIZE 32
+#endif
+
+/* ------------------------ PRIVATE IOCTL ------------------------ */
+
+#define SIOCSIPQTHR SIOCIWFIRSTPRIV /* Set quality threshold */
+#define SIOCGIPQTHR SIOCIWFIRSTPRIV + 1 /* Get quality threshold */
+#define SIOCSIPROAM SIOCIWFIRSTPRIV + 2 /* Set roaming state */
+#define SIOCGIPROAM SIOCIWFIRSTPRIV + 3 /* Get roaming state */
+
+#define SIOCSIPHISTO SIOCIWFIRSTPRIV + 4 /* Set histogram ranges */
+#define SIOCGIPHISTO SIOCIWFIRSTPRIV + 5 /* Get histogram values */
+
+/*************************** WaveLAN Roaming **************************/
+#ifdef WAVELAN_ROAMING /* Conditional compile, see above in options */
+
+#define WAVELAN_ROAMING_DEBUG 0 /* 1 = Trace of handover decisions */
+ /* 2 = Info on each beacon rcvd... */
+#define MAX_WAVEPOINTS 7 /* Max visible at one time */
+#define WAVEPOINT_HISTORY 5 /* SNR sample history slow search */
+#define WAVEPOINT_FAST_HISTORY 2 /* SNR sample history fast search */
+#define SEARCH_THRESH_LOW 10 /* SNR to enter cell search */
+#define SEARCH_THRESH_HIGH 13 /* SNR to leave cell search */
+#define WAVELAN_ROAMING_DELTA 1 /* Hysteresis value (+/- SNR) */
+#define CELL_TIMEOUT 2*HZ /* in jiffies */
+
+#define FAST_CELL_SEARCH 1 /* Boolean values... */
+#define NWID_PROMISC 1 /* for code clarity. */
+
+typedef struct wavepoint_beacon
+{
+ unsigned char dsap, /* Unused */
+ ssap, /* Unused */
+ ctrl, /* Unused */
+ O,U,I, /* Unused */
+ spec_id1, /* Unused */
+ spec_id2, /* Unused */
+ pdu_type, /* Unused */
+ seq; /* WavePoint beacon sequence number */
+ unsigned short domain_id, /* WavePoint Domain ID */
+ nwid; /* WavePoint NWID */
+} wavepoint_beacon;
+
+typedef struct wavepoint_history
+{
+ unsigned short nwid; /* WavePoint's NWID */
+ int average_slow; /* SNR running average */
+ int average_fast; /* SNR running average */
+ unsigned char sigqual[WAVEPOINT_HISTORY]; /* Ringbuffer of recent SNR's */
+ unsigned char qualptr; /* Index into ringbuffer */
+ unsigned char last_seq; /* Last seq. no seen for WavePoint */
+ struct wavepoint_history *next; /* Next WavePoint in table */
+ struct wavepoint_history *prev; /* Previous WavePoint in table */
+ unsigned long last_seen; /* Time of last beacon recvd, jiffies */
+} wavepoint_history;
+
+struct wavepoint_table
+{
+ wavepoint_history *head; /* Start of ringbuffer */
+ int num_wavepoints; /* No. of WavePoints visible */
+ unsigned char locked; /* Table lock */
+};
+
+#endif /* WAVELAN_ROAMING */
+
+/****************************** TYPES ******************************/
+
+/* Shortcuts */
+typedef struct net_device_stats en_stats;
+typedef struct iw_statistics iw_stats;
+typedef struct iw_quality iw_qual;
+typedef struct iw_freq iw_freq;
+typedef struct net_local net_local;
+typedef struct timer_list timer_list;
+
+/* Basic types */
+typedef u_char mac_addr[WAVELAN_ADDR_SIZE]; /* Hardware address */
+
+/*
+ * Static specific data for the interface.
+ *
+ * For each network interface, Linux keep data in two structure. "device"
+ * keep the generic data (same format for everybody) and "net_local" keep
+ * the additional specific data.
+ * Note that some of this specific data is in fact generic (en_stats, for
+ * example).
+ */
+struct net_local
+{
+ dev_node_t node; /* ???? What is this stuff ???? */
+ struct net_device * dev; /* Reverse link... */
+ spinlock_t spinlock; /* Serialize access to the hardware (SMP) */
+ dev_link_t * link; /* pcmcia structure */
+ en_stats stats; /* Ethernet interface statistics */
+ int nresets; /* Number of hw resets */
+ u_char configured; /* If it is configured */
+ u_char reconfig_82593; /* Need to reconfigure the controller */
+ u_char promiscuous; /* Promiscuous mode */
+ u_char allmulticast; /* All Multicast mode */
+ int mc_count; /* Number of multicast addresses */
+
+ int stop; /* Current i82593 Stop Hit Register */
+ int rfp; /* Last DMA machine receive pointer */
+ int overrunning; /* Receiver overrun flag */
+
+#ifdef WIRELESS_EXT
+ iw_stats wstats; /* Wireless specific stats */
+
+ struct iw_spy_data spy_data;
+ struct iw_public_data wireless_data;
+#endif
+
+#ifdef HISTOGRAM
+ int his_number; /* Number of intervals */
+ u_char his_range[16]; /* Boundaries of interval ]n-1; n] */
+ u_long his_sum[16]; /* Sum in interval */
+#endif /* HISTOGRAM */
+#ifdef WAVELAN_ROAMING
+ u_long domain_id; /* Domain ID we lock on for roaming */
+ int filter_domains; /* Check Domain ID of beacon found */
+ struct wavepoint_table wavepoint_table; /* Table of visible WavePoints*/
+ wavepoint_history * curr_point; /* Current wavepoint */
+ int cell_search; /* Searching for new cell? */
+ struct timer_list cell_timer; /* Garbage collection */
+#endif /* WAVELAN_ROAMING */
+ void __iomem *mem;
+};
+
+/**************************** PROTOTYPES ****************************/
+
+#ifdef WAVELAN_ROAMING
+/* ---------------------- ROAMING SUBROUTINES -----------------------*/
+
+wavepoint_history *wl_roam_check(unsigned short nwid, net_local *lp);
+wavepoint_history *wl_new_wavepoint(unsigned short nwid, unsigned char seq, net_local *lp);
+void wl_del_wavepoint(wavepoint_history *wavepoint, net_local *lp);
+void wl_cell_expiry(unsigned long data);
+wavepoint_history *wl_best_sigqual(int fast_search, net_local *lp);
+void wl_update_history(wavepoint_history *wavepoint, unsigned char sigqual, unsigned char seq);
+void wv_roam_handover(wavepoint_history *wavepoint, net_local *lp);
+void wv_nwid_filter(unsigned char mode, net_local *lp);
+void wv_roam_init(struct net_device *dev);
+void wv_roam_cleanup(struct net_device *dev);
+#endif /* WAVELAN_ROAMING */
+
+/* ----------------- MODEM MANAGEMENT SUBROUTINES ----------------- */
+static inline u_char /* data */
+ hasr_read(u_long); /* Read the host interface : base address */
+static inline void
+ hacr_write(u_long, /* Write to host interface : base address */
+ u_char), /* data */
+ hacr_write_slow(u_long,
+ u_char);
+static void
+ psa_read(struct net_device *, /* Read the Parameter Storage Area */
+ int, /* offset in PSA */
+ u_char *, /* buffer to fill */
+ int), /* size to read */
+ psa_write(struct net_device *, /* Write to the PSA */
+ int, /* Offset in psa */
+ u_char *, /* Buffer in memory */
+ int); /* Length of buffer */
+static inline void
+ mmc_out(u_long, /* Write 1 byte to the Modem Manag Control */
+ u_short,
+ u_char),
+ mmc_write(u_long, /* Write n bytes to the MMC */
+ u_char,
+ u_char *,
+ int);
+static inline u_char /* Read 1 byte from the MMC */
+ mmc_in(u_long,
+ u_short);
+static inline void
+ mmc_read(u_long, /* Read n bytes from the MMC */
+ u_char,
+ u_char *,
+ int),
+ fee_wait(u_long, /* Wait for frequency EEprom : base address */
+ int, /* Base delay to wait for */
+ int); /* Number of time to wait */
+static void
+ fee_read(u_long, /* Read the frequency EEprom : base address */
+ u_short, /* destination offset */
+ u_short *, /* data buffer */
+ int); /* number of registers */
+/* ---------------------- I82593 SUBROUTINES ----------------------- */
+static int
+ wv_82593_cmd(struct net_device *, /* synchronously send a command to i82593 */
+ char *,
+ int,
+ int);
+static inline int
+ wv_diag(struct net_device *); /* Diagnostique the i82593 */
+static int
+ read_ringbuf(struct net_device *, /* Read a receive buffer */
+ int,
+ char *,
+ int);
+static inline void
+ wv_82593_reconfig(struct net_device *); /* Reconfigure the controller */
+/* ------------------- DEBUG & INFO SUBROUTINES ------------------- */
+static inline void
+ wv_init_info(struct net_device *); /* display startup info */
+/* ------------------- IOCTL, STATS & RECONFIG ------------------- */
+static en_stats *
+ wavelan_get_stats(struct net_device *); /* Give stats /proc/net/dev */
+static iw_stats *
+ wavelan_get_wireless_stats(struct net_device *);
+/* ----------------------- PACKET RECEPTION ----------------------- */
+static inline int
+ wv_start_of_frame(struct net_device *, /* Seek beggining of current frame */
+ int, /* end of frame */
+ int); /* start of buffer */
+static inline void
+ wv_packet_read(struct net_device *, /* Read a packet from a frame */
+ int,
+ int),
+ wv_packet_rcv(struct net_device *); /* Read all packets waiting */
+/* --------------------- PACKET TRANSMISSION --------------------- */
+static inline void
+ wv_packet_write(struct net_device *, /* Write a packet to the Tx buffer */
+ void *,
+ short);
+static int
+ wavelan_packet_xmit(struct sk_buff *, /* Send a packet */
+ struct net_device *);
+/* -------------------- HARDWARE CONFIGURATION -------------------- */
+static inline int
+ wv_mmc_init(struct net_device *); /* Initialize the modem */
+static int
+ wv_ru_stop(struct net_device *), /* Stop the i82593 receiver unit */
+ wv_ru_start(struct net_device *); /* Start the i82593 receiver unit */
+static int
+ wv_82593_config(struct net_device *); /* Configure the i82593 */
+static inline int
+ wv_pcmcia_reset(struct net_device *); /* Reset the pcmcia interface */
+static int
+ wv_hw_config(struct net_device *); /* Reset & configure the whole hardware */
+static inline void
+ wv_hw_reset(struct net_device *); /* Same, + start receiver unit */
+static inline int
+ wv_pcmcia_config(dev_link_t *); /* Configure the pcmcia interface */
+static void
+ wv_pcmcia_release(dev_link_t *);/* Remove a device */
+/* ---------------------- INTERRUPT HANDLING ---------------------- */
+static irqreturn_t
+ wavelan_interrupt(int, /* Interrupt handler */
+ void *,
+ struct pt_regs *);
+static void
+ wavelan_watchdog(struct net_device *); /* Transmission watchdog */
+/* ------------------- CONFIGURATION CALLBACKS ------------------- */
+static int
+ wavelan_open(struct net_device *), /* Open the device */
+ wavelan_close(struct net_device *); /* Close the device */
+static dev_link_t *
+ wavelan_attach(void); /* Create a new device */
+static void
+ wavelan_detach(dev_link_t *); /* Destroy a removed device */
+static int
+ wavelan_event(event_t, /* Manage pcmcia events */
+ int,
+ event_callback_args_t *);
+
+/**************************** VARIABLES ****************************/
+
+static dev_info_t dev_info = "wavelan_cs";
+static dev_link_t *dev_list = NULL; /* Linked list of devices */
+
+/*
+ * Parameters that can be set with 'insmod'
+ * The exact syntax is 'insmod wavelan_cs.o <var>=<value>'
+ */
+
+/* Shared memory speed, in ns */
+static int mem_speed = 0;
+
+/* New module interface */
+module_param(mem_speed, int, 0);
+
+#ifdef WAVELAN_ROAMING /* Conditional compile, see above in options */
+/* Enable roaming mode ? No ! Please keep this to 0 */
+static int do_roaming = 0;
+module_param(do_roaming, bool, 0);
+#endif /* WAVELAN_ROAMING */
+
+MODULE_LICENSE("GPL");
+
+#endif /* WAVELAN_CS_P_H */
+
diff --git a/drivers/net/wireless/wl3501.h b/drivers/net/wireless/wl3501.h
new file mode 100644
index 0000000..8636d93
--- /dev/null
+++ b/drivers/net/wireless/wl3501.h
@@ -0,0 +1,614 @@
+#ifndef __WL3501_H__
+#define __WL3501_H__
+
+#include <linux/spinlock.h>
+#include "ieee802_11.h"
+
+/* define for WLA 2.0 */
+#define WL3501_BLKSZ 256
+/*
+ * ID for input Signals of DRIVER block
+ * bit[7-5] is block ID: 000
+ * bit[4-0] is signal ID
+*/
+enum wl3501_signals {
+ WL3501_SIG_ALARM,
+ WL3501_SIG_MD_CONFIRM,
+ WL3501_SIG_MD_IND,
+ WL3501_SIG_ASSOC_CONFIRM,
+ WL3501_SIG_ASSOC_IND,
+ WL3501_SIG_AUTH_CONFIRM,
+ WL3501_SIG_AUTH_IND,
+ WL3501_SIG_DEAUTH_CONFIRM,
+ WL3501_SIG_DEAUTH_IND,
+ WL3501_SIG_DISASSOC_CONFIRM,
+ WL3501_SIG_DISASSOC_IND,
+ WL3501_SIG_GET_CONFIRM,
+ WL3501_SIG_JOIN_CONFIRM,
+ WL3501_SIG_PWR_MGMT_CONFIRM,
+ WL3501_SIG_REASSOC_CONFIRM,
+ WL3501_SIG_REASSOC_IND,
+ WL3501_SIG_SCAN_CONFIRM,
+ WL3501_SIG_SET_CONFIRM,
+ WL3501_SIG_START_CONFIRM,
+ WL3501_SIG_RESYNC_CONFIRM,
+ WL3501_SIG_SITE_CONFIRM,
+ WL3501_SIG_SAVE_CONFIRM,
+ WL3501_SIG_RFTEST_CONFIRM,
+/*
+ * ID for input Signals of MLME block
+ * bit[7-5] is block ID: 010
+ * bit[4-0] is signal ID
+ */
+ WL3501_SIG_ASSOC_REQ = 0x20,
+ WL3501_SIG_AUTH_REQ,
+ WL3501_SIG_DEAUTH_REQ,
+ WL3501_SIG_DISASSOC_REQ,
+ WL3501_SIG_GET_REQ,
+ WL3501_SIG_JOIN_REQ,
+ WL3501_SIG_PWR_MGMT_REQ,
+ WL3501_SIG_REASSOC_REQ,
+ WL3501_SIG_SCAN_REQ,
+ WL3501_SIG_SET_REQ,
+ WL3501_SIG_START_REQ,
+ WL3501_SIG_MD_REQ,
+ WL3501_SIG_RESYNC_REQ,
+ WL3501_SIG_SITE_REQ,
+ WL3501_SIG_SAVE_REQ,
+ WL3501_SIG_RF_TEST_REQ,
+ WL3501_SIG_MM_CONFIRM = 0x60,
+ WL3501_SIG_MM_IND,
+};
+
+enum wl3501_mib_attribs {
+ WL3501_MIB_ATTR_STATION_ID,
+ WL3501_MIB_ATTR_AUTH_ALGORITHMS,
+ WL3501_MIB_ATTR_AUTH_TYPE,
+ WL3501_MIB_ATTR_MEDIUM_OCCUPANCY_LIMIT,
+ WL3501_MIB_ATTR_CF_POLLABLE,
+ WL3501_MIB_ATTR_CFP_PERIOD,
+ WL3501_MIB_ATTR_CFPMAX_DURATION,
+ WL3501_MIB_ATTR_AUTH_RESP_TMOUT,
+ WL3501_MIB_ATTR_RX_DTIMS,
+ WL3501_MIB_ATTR_PRIV_OPT_IMPLEMENTED,
+ WL3501_MIB_ATTR_PRIV_INVOKED,
+ WL3501_MIB_ATTR_WEP_DEFAULT_KEYS,
+ WL3501_MIB_ATTR_WEP_DEFAULT_KEY_ID,
+ WL3501_MIB_ATTR_WEP_KEY_MAPPINGS,
+ WL3501_MIB_ATTR_WEP_KEY_MAPPINGS_LEN,
+ WL3501_MIB_ATTR_EXCLUDE_UNENCRYPTED,
+ WL3501_MIB_ATTR_WEP_ICV_ERROR_COUNT,
+ WL3501_MIB_ATTR_WEP_UNDECRYPTABLE_COUNT,
+ WL3501_MIB_ATTR_WEP_EXCLUDED_COUNT,
+ WL3501_MIB_ATTR_MAC_ADDR,
+ WL3501_MIB_ATTR_GROUP_ADDRS,
+ WL3501_MIB_ATTR_RTS_THRESHOLD,
+ WL3501_MIB_ATTR_SHORT_RETRY_LIMIT,
+ WL3501_MIB_ATTR_LONG_RETRY_LIMIT,
+ WL3501_MIB_ATTR_FRAG_THRESHOLD,
+ WL3501_MIB_ATTR_MAX_TX_MSDU_LIFETIME,
+ WL3501_MIB_ATTR_MAX_RX_LIFETIME,
+ WL3501_MIB_ATTR_MANUFACTURER_ID,
+ WL3501_MIB_ATTR_PRODUCT_ID,
+ WL3501_MIB_ATTR_TX_FRAG_COUNT,
+ WL3501_MIB_ATTR_MULTICAST_TX_FRAME_COUNT,
+ WL3501_MIB_ATTR_FAILED_COUNT,
+ WL3501_MIB_ATTR_RX_FRAG_COUNT,
+ WL3501_MIB_ATTR_MULTICAST_RX_COUNT,
+ WL3501_MIB_ATTR_FCS_ERROR_COUNT,
+ WL3501_MIB_ATTR_RETRY_COUNT,
+ WL3501_MIB_ATTR_MULTIPLE_RETRY_COUNT,
+ WL3501_MIB_ATTR_RTS_SUCCESS_COUNT,
+ WL3501_MIB_ATTR_RTS_FAILURE_COUNT,
+ WL3501_MIB_ATTR_ACK_FAILURE_COUNT,
+ WL3501_MIB_ATTR_FRAME_DUPLICATE_COUNT,
+ WL3501_MIB_ATTR_PHY_TYPE,
+ WL3501_MIB_ATTR_REG_DOMAINS_SUPPORT,
+ WL3501_MIB_ATTR_CURRENT_REG_DOMAIN,
+ WL3501_MIB_ATTR_SLOT_TIME,
+ WL3501_MIB_ATTR_CCA_TIME,
+ WL3501_MIB_ATTR_RX_TX_TURNAROUND_TIME,
+ WL3501_MIB_ATTR_TX_PLCP_DELAY,
+ WL3501_MIB_ATTR_RX_TX_SWITCH_TIME,
+ WL3501_MIB_ATTR_TX_RAMP_ON_TIME,
+ WL3501_MIB_ATTR_TX_RF_DELAY,
+ WL3501_MIB_ATTR_SIFS_TIME,
+ WL3501_MIB_ATTR_RX_RF_DELAY,
+ WL3501_MIB_ATTR_RX_PLCP_DELAY,
+ WL3501_MIB_ATTR_MAC_PROCESSING_DELAY,
+ WL3501_MIB_ATTR_TX_RAMP_OFF_TIME,
+ WL3501_MIB_ATTR_PREAMBLE_LEN,
+ WL3501_MIB_ATTR_PLCP_HEADER_LEN,
+ WL3501_MIB_ATTR_MPDU_DURATION_FACTOR,
+ WL3501_MIB_ATTR_AIR_PROPAGATION_TIME,
+ WL3501_MIB_ATTR_TEMP_TYPE,
+ WL3501_MIB_ATTR_CW_MIN,
+ WL3501_MIB_ATTR_CW_MAX,
+ WL3501_MIB_ATTR_SUPPORT_DATA_RATES_TX,
+ WL3501_MIB_ATTR_SUPPORT_DATA_RATES_RX,
+ WL3501_MIB_ATTR_MPDU_MAX_LEN,
+ WL3501_MIB_ATTR_SUPPORT_TX_ANTENNAS,
+ WL3501_MIB_ATTR_CURRENT_TX_ANTENNA,
+ WL3501_MIB_ATTR_SUPPORT_RX_ANTENNAS,
+ WL3501_MIB_ATTR_DIVERSITY_SUPPORT,
+ WL3501_MIB_ATTR_DIVERSITY_SELECTION_RS,
+ WL3501_MIB_ATTR_NR_SUPPORTED_PWR_LEVELS,
+ WL3501_MIB_ATTR_TX_PWR_LEVEL1,
+ WL3501_MIB_ATTR_TX_PWR_LEVEL2,
+ WL3501_MIB_ATTR_TX_PWR_LEVEL3,
+ WL3501_MIB_ATTR_TX_PWR_LEVEL4,
+ WL3501_MIB_ATTR_TX_PWR_LEVEL5,
+ WL3501_MIB_ATTR_TX_PWR_LEVEL6,
+ WL3501_MIB_ATTR_TX_PWR_LEVEL7,
+ WL3501_MIB_ATTR_TX_PWR_LEVEL8,
+ WL3501_MIB_ATTR_CURRENT_TX_PWR_LEVEL,
+ WL3501_MIB_ATTR_CURRENT_CHAN,
+ WL3501_MIB_ATTR_CCA_MODE_SUPPORTED,
+ WL3501_MIB_ATTR_CURRENT_CCA_MODE,
+ WL3501_MIB_ATTR_ED_THRESHOLD,
+ WL3501_MIB_ATTR_SINTHESIZER_LOCKED,
+ WL3501_MIB_ATTR_CURRENT_PWR_STATE,
+ WL3501_MIB_ATTR_DOZE_TURNON_TIME,
+ WL3501_MIB_ATTR_RCR33,
+ WL3501_MIB_ATTR_DEFAULT_CHAN,
+ WL3501_MIB_ATTR_SSID,
+ WL3501_MIB_ATTR_PWR_MGMT_ENABLE,
+ WL3501_MIB_ATTR_NET_CAPABILITY,
+ WL3501_MIB_ATTR_ROUTING,
+};
+
+enum wl3501_net_type {
+ WL3501_NET_TYPE_INFRA,
+ WL3501_NET_TYPE_ADHOC,
+ WL3501_NET_TYPE_ANY_BSS,
+};
+
+enum wl3501_scan_type {
+ WL3501_SCAN_TYPE_ACTIVE,
+ WL3501_SCAN_TYPE_PASSIVE,
+};
+
+enum wl3501_tx_result {
+ WL3501_TX_RESULT_SUCCESS,
+ WL3501_TX_RESULT_NO_BSS,
+ WL3501_TX_RESULT_RETRY_LIMIT,
+};
+
+enum wl3501_sys_type {
+ WL3501_SYS_TYPE_OPEN,
+ WL3501_SYS_TYPE_SHARE_KEY,
+};
+
+enum wl3501_status {
+ WL3501_STATUS_SUCCESS,
+ WL3501_STATUS_INVALID,
+ WL3501_STATUS_TIMEOUT,
+ WL3501_STATUS_REFUSED,
+ WL3501_STATUS_MANY_REQ,
+ WL3501_STATUS_ALREADY_BSS,
+};
+
+#define WL3501_MGMT_CAPABILITY_ESS 0x0001 /* see 802.11 p.58 */
+#define WL3501_MGMT_CAPABILITY_IBSS 0x0002 /* - " - */
+#define WL3501_MGMT_CAPABILITY_CF_POLLABLE 0x0004 /* - " - */
+#define WL3501_MGMT_CAPABILITY_CF_POLL_REQUEST 0x0008 /* - " - */
+#define WL3501_MGMT_CAPABILITY_PRIVACY 0x0010 /* - " - */
+
+#define IW_REG_DOMAIN_FCC 0x10 /* Channel 1 to 11 USA */
+#define IW_REG_DOMAIN_DOC 0x20 /* Channel 1 to 11 Canada */
+#define IW_REG_DOMAIN_ETSI 0x30 /* Channel 1 to 13 Europe */
+#define IW_REG_DOMAIN_SPAIN 0x31 /* Channel 10 to 11 Spain */
+#define IW_REG_DOMAIN_FRANCE 0x32 /* Channel 10 to 13 France */
+#define IW_REG_DOMAIN_MKK 0x40 /* Channel 14 Japan */
+#define IW_REG_DOMAIN_MKK1 0x41 /* Channel 1-14 Japan */
+#define IW_REG_DOMAIN_ISRAEL 0x50 /* Channel 3 - 9 Israel */
+
+#define IW_MGMT_RATE_LABEL_MANDATORY 128 /* MSB */
+
+enum iw_mgmt_rate_labels {
+ IW_MGMT_RATE_LABEL_1MBIT = 2,
+ IW_MGMT_RATE_LABEL_2MBIT = 4,
+ IW_MGMT_RATE_LABEL_5_5MBIT = 11,
+ IW_MGMT_RATE_LABEL_11MBIT = 22,
+};
+
+enum iw_mgmt_info_element_ids {
+ IW_MGMT_INFO_ELEMENT_SSID, /* Service Set Identity */
+ IW_MGMT_INFO_ELEMENT_SUPPORTED_RATES,
+ IW_MGMT_INFO_ELEMENT_FH_PARAMETER_SET,
+ IW_MGMT_INFO_ELEMENT_DS_PARAMETER_SET,
+ IW_MGMT_INFO_ELEMENT_CS_PARAMETER_SET,
+ IW_MGMT_INFO_ELEMENT_CS_TIM, /* Traffic Information Map */
+ IW_MGMT_INFO_ELEMENT_IBSS_PARAMETER_SET,
+ /* 7-15: Reserved, unused */
+ IW_MGMT_INFO_ELEMENT_CHALLENGE_TEXT = 16,
+ /* 17-31 Reserved for challenge text extension */
+ /* 32-255 Reserved, unused */
+};
+
+struct iw_mgmt_info_element {
+ u8 id; /* one of enum iw_mgmt_info_element_ids,
+ but sizeof(enum) > sizeof(u8) :-( */
+ u8 len;
+ u8 data[0];
+} __attribute__ ((packed));
+
+struct iw_mgmt_essid_pset {
+ struct iw_mgmt_info_element el;
+ u8 essid[IW_ESSID_MAX_SIZE];
+} __attribute__ ((packed));
+
+/*
+ * According to 802.11 Wireless Netowors, the definitive guide - O'Reilly
+ * Pg 75
+ */
+#define IW_DATA_RATE_MAX_LABELS 8
+
+struct iw_mgmt_data_rset {
+ struct iw_mgmt_info_element el;
+ u8 data_rate_labels[IW_DATA_RATE_MAX_LABELS];
+} __attribute__ ((packed));
+
+struct iw_mgmt_ds_pset {
+ struct iw_mgmt_info_element el;
+ u8 chan;
+} __attribute__ ((packed));
+
+struct iw_mgmt_cf_pset {
+ struct iw_mgmt_info_element el;
+ u8 cfp_count;
+ u8 cfp_period;
+ u16 cfp_max_duration;
+ u16 cfp_dur_remaining;
+} __attribute__ ((packed));
+
+struct iw_mgmt_ibss_pset {
+ struct iw_mgmt_info_element el;
+ u16 atim_window;
+} __attribute__ ((packed));
+
+struct wl3501_tx_hdr {
+ u16 tx_cnt;
+ u8 sync[16];
+ u16 sfd;
+ u8 signal;
+ u8 service;
+ u16 len;
+ u16 crc16;
+ u16 frame_ctrl;
+ u16 duration_id;
+ u8 addr1[ETH_ALEN];
+ u8 addr2[ETH_ALEN];
+ u8 addr3[ETH_ALEN];
+ u16 seq_ctrl;
+ u8 addr4[ETH_ALEN];
+};
+
+struct wl3501_rx_hdr {
+ u16 rx_next_blk;
+ u16 rc_next_frame_blk;
+ u8 rx_blk_ctrl;
+ u8 rx_next_frame;
+ u8 rx_next_frame1;
+ u8 rssi;
+ char time[8];
+ u8 signal;
+ u8 service;
+ u16 len;
+ u16 crc16;
+ u16 frame_ctrl;
+ u16 duration;
+ u8 addr1[ETH_ALEN];
+ u8 addr2[ETH_ALEN];
+ u8 addr3[ETH_ALEN];
+ u16 seq;
+ u8 addr4[ETH_ALEN];
+};
+
+struct wl3501_start_req {
+ u16 next_blk;
+ u8 sig_id;
+ u8 bss_type;
+ u16 beacon_period;
+ u16 dtim_period;
+ u16 probe_delay;
+ u16 cap_info;
+ struct iw_mgmt_essid_pset ssid;
+ struct iw_mgmt_data_rset bss_basic_rset;
+ struct iw_mgmt_data_rset operational_rset;
+ struct iw_mgmt_cf_pset cf_pset;
+ struct iw_mgmt_ds_pset ds_pset;
+ struct iw_mgmt_ibss_pset ibss_pset;
+};
+
+struct wl3501_assoc_req {
+ u16 next_blk;
+ u8 sig_id;
+ u8 reserved;
+ u16 timeout;
+ u16 cap_info;
+ u16 listen_interval;
+ u8 mac_addr[ETH_ALEN];
+};
+
+struct wl3501_assoc_confirm {
+ u16 next_blk;
+ u8 sig_id;
+ u8 reserved;
+ u16 status;
+};
+
+struct wl3501_assoc_ind {
+ u16 next_blk;
+ u8 sig_id;
+ u8 mac_addr[ETH_ALEN];
+};
+
+struct wl3501_auth_req {
+ u16 next_blk;
+ u8 sig_id;
+ u8 reserved;
+ u16 type;
+ u16 timeout;
+ u8 mac_addr[ETH_ALEN];
+};
+
+struct wl3501_auth_confirm {
+ u16 next_blk;
+ u8 sig_id;
+ u8 reserved;
+ u16 type;
+ u16 status;
+ u8 mac_addr[ETH_ALEN];
+};
+
+struct wl3501_get_req {
+ u16 next_blk;
+ u8 sig_id;
+ u8 reserved;
+ u16 mib_attrib;
+};
+
+struct wl3501_get_confirm {
+ u16 next_blk;
+ u8 sig_id;
+ u8 reserved;
+ u16 mib_status;
+ u16 mib_attrib;
+ u8 mib_value[100];
+};
+
+struct wl3501_join_req {
+ u16 next_blk;
+ u8 sig_id;
+ u8 reserved;
+ struct iw_mgmt_data_rset operational_rset;
+ u16 reserved2;
+ u16 timeout;
+ u16 probe_delay;
+ u8 timestamp[8];
+ u8 local_time[8];
+ u16 beacon_period;
+ u16 dtim_period;
+ u16 cap_info;
+ u8 bss_type;
+ u8 bssid[ETH_ALEN];
+ struct iw_mgmt_essid_pset ssid;
+ struct iw_mgmt_ds_pset ds_pset;
+ struct iw_mgmt_cf_pset cf_pset;
+ struct iw_mgmt_ibss_pset ibss_pset;
+ struct iw_mgmt_data_rset bss_basic_rset;
+};
+
+struct wl3501_join_confirm {
+ u16 next_blk;
+ u8 sig_id;
+ u8 reserved;
+ u16 status;
+};
+
+struct wl3501_pwr_mgmt_req {
+ u16 next_blk;
+ u8 sig_id;
+ u8 pwr_save;
+ u8 wake_up;
+ u8 receive_dtims;
+};
+
+struct wl3501_pwr_mgmt_confirm {
+ u16 next_blk;
+ u8 sig_id;
+ u8 reserved;
+ u16 status;
+};
+
+struct wl3501_scan_req {
+ u16 next_blk;
+ u8 sig_id;
+ u8 bss_type;
+ u16 probe_delay;
+ u16 min_chan_time;
+ u16 max_chan_time;
+ u8 chan_list[14];
+ u8 bssid[ETH_ALEN];
+ struct iw_mgmt_essid_pset ssid;
+ enum wl3501_scan_type scan_type;
+};
+
+struct wl3501_scan_confirm {
+ u16 next_blk;
+ u8 sig_id;
+ u8 reserved;
+ u16 status;
+ char timestamp[8];
+ char localtime[8];
+ u16 beacon_period;
+ u16 dtim_period;
+ u16 cap_info;
+ u8 bss_type;
+ u8 bssid[ETH_ALEN];
+ struct iw_mgmt_essid_pset ssid;
+ struct iw_mgmt_ds_pset ds_pset;
+ struct iw_mgmt_cf_pset cf_pset;
+ struct iw_mgmt_ibss_pset ibss_pset;
+ struct iw_mgmt_data_rset bss_basic_rset;
+ u8 rssi;
+};
+
+struct wl3501_start_confirm {
+ u16 next_blk;
+ u8 sig_id;
+ u8 reserved;
+ u16 status;
+};
+
+struct wl3501_md_req {
+ u16 next_blk;
+ u8 sig_id;
+ u8 routing;
+ u16 data;
+ u16 size;
+ u8 pri;
+ u8 service_class;
+ u8 daddr[ETH_ALEN];
+ u8 saddr[ETH_ALEN];
+};
+
+struct wl3501_md_ind {
+ u16 next_blk;
+ u8 sig_id;
+ u8 routing;
+ u16 data;
+ u16 size;
+ u8 reception;
+ u8 pri;
+ u8 service_class;
+ u8 daddr[ETH_ALEN];
+ u8 saddr[ETH_ALEN];
+};
+
+struct wl3501_md_confirm {
+ u16 next_blk;
+ u8 sig_id;
+ u8 reserved;
+ u16 data;
+ u8 status;
+ u8 pri;
+ u8 service_class;
+};
+
+struct wl3501_resync_req {
+ u16 next_blk;
+ u8 sig_id;
+};
+
+/* Definitions for supporting clone adapters. */
+/* System Interface Registers (SIR space) */
+#define WL3501_NIC_GCR ((u8)0x00) /* SIR0 - General Conf Register */
+#define WL3501_NIC_BSS ((u8)0x01) /* SIR1 - Bank Switching Select Reg */
+#define WL3501_NIC_LMAL ((u8)0x02) /* SIR2 - Local Mem addr Reg [7:0] */
+#define WL3501_NIC_LMAH ((u8)0x03) /* SIR3 - Local Mem addr Reg [14:8] */
+#define WL3501_NIC_IODPA ((u8)0x04) /* SIR4 - I/O Data Port A */
+#define WL3501_NIC_IODPB ((u8)0x05) /* SIR5 - I/O Data Port B */
+#define WL3501_NIC_IODPC ((u8)0x06) /* SIR6 - I/O Data Port C */
+#define WL3501_NIC_IODPD ((u8)0x07) /* SIR7 - I/O Data Port D */
+
+/* Bits in GCR */
+#define WL3501_GCR_SWRESET ((u8)0x80)
+#define WL3501_GCR_CORESET ((u8)0x40)
+#define WL3501_GCR_DISPWDN ((u8)0x20)
+#define WL3501_GCR_ECWAIT ((u8)0x10)
+#define WL3501_GCR_ECINT ((u8)0x08)
+#define WL3501_GCR_INT2EC ((u8)0x04)
+#define WL3501_GCR_ENECINT ((u8)0x02)
+#define WL3501_GCR_DAM ((u8)0x01)
+
+/* Bits in BSS (Bank Switching Select Register) */
+#define WL3501_BSS_FPAGE0 ((u8)0x20) /* Flash memory page0 */
+#define WL3501_BSS_FPAGE1 ((u8)0x28)
+#define WL3501_BSS_FPAGE2 ((u8)0x30)
+#define WL3501_BSS_FPAGE3 ((u8)0x38)
+#define WL3501_BSS_SPAGE0 ((u8)0x00) /* SRAM page0 */
+#define WL3501_BSS_SPAGE1 ((u8)0x08)
+#define WL3501_BSS_SPAGE2 ((u8)0x10)
+#define WL3501_BSS_SPAGE3 ((u8)0x18)
+
+/* Define Driver Interface */
+/* Refer IEEE 802.11 */
+/* Tx packet header, include PLCP and MPDU */
+/* Tx PLCP Header */
+struct wl3501_80211_tx_plcp_hdr {
+ u8 sync[16];
+ u16 sfd;
+ u8 signal;
+ u8 service;
+ u16 len;
+ u16 crc16;
+} __attribute__ ((packed));
+
+struct wl3501_80211_tx_hdr {
+ struct wl3501_80211_tx_plcp_hdr pclp_hdr;
+ struct ieee802_11_hdr mac_hdr;
+} __attribute__ ((packed));
+
+/*
+ Reserve the beginning Tx space for descriptor use.
+
+ TxBlockOffset --> *----*----*----*----* \
+ (TxFreeDesc) | 0 | 1 | 2 | 3 | \
+ | 4 | 5 | 6 | 7 | |
+ | 8 | 9 | 10 | 11 | TX_DESC * 20
+ | 12 | 13 | 14 | 15 | |
+ | 16 | 17 | 18 | 19 | /
+ TxBufferBegin --> *----*----*----*----* /
+ (TxBufferHead) | |
+ (TxBufferTail) | |
+ | Send Buffer |
+ | |
+ | |
+ *-------------------*
+ TxBufferEnd -------------------------/
+
+*/
+
+struct wl3501_card {
+ int base_addr;
+ u8 mac_addr[ETH_ALEN];
+ spinlock_t lock;
+ wait_queue_head_t wait;
+ struct wl3501_get_confirm sig_get_confirm;
+ struct wl3501_pwr_mgmt_confirm sig_pwr_mgmt_confirm;
+ u16 tx_buffer_size;
+ u16 tx_buffer_head;
+ u16 tx_buffer_tail;
+ u16 tx_buffer_cnt;
+ u16 esbq_req_start;
+ u16 esbq_req_end;
+ u16 esbq_req_head;
+ u16 esbq_req_tail;
+ u16 esbq_confirm_start;
+ u16 esbq_confirm_end;
+ u16 esbq_confirm;
+ struct iw_mgmt_essid_pset essid;
+ struct iw_mgmt_essid_pset keep_essid;
+ u8 bssid[ETH_ALEN];
+ int net_type;
+ char nick[32];
+ char card_name[32];
+ char firmware_date[32];
+ u8 chan;
+ u8 cap_info;
+ u16 start_seg;
+ u16 bss_cnt;
+ u16 join_sta_bss;
+ u8 rssi;
+ u8 adhoc_times;
+ u8 reg_domain;
+ u8 version[2];
+ struct wl3501_scan_confirm bss_set[20];
+ struct net_device_stats stats;
+ struct iw_statistics wstats;
+ struct iw_spy_data spy_data;
+ struct dev_node_t node;
+};
+#endif
diff --git a/drivers/net/wireless/wl3501_cs.c b/drivers/net/wireless/wl3501_cs.c
new file mode 100644
index 0000000..1433e5a
--- /dev/null
+++ b/drivers/net/wireless/wl3501_cs.c
@@ -0,0 +1,2270 @@
+/*
+ * WL3501 Wireless LAN PCMCIA Card Driver for Linux
+ * Written originally for Linux 2.0.30 by Fox Chen, mhchen@golf.ccl.itri.org.tw
+ * Ported to 2.2, 2.4 & 2.5 by Arnaldo Carvalho de Melo <acme@conectiva.com.br>
+ * Wireless extensions in 2.4 by Gustavo Niemeyer <niemeyer@conectiva.com>
+ *
+ * References used by Fox Chen while writing the original driver for 2.0.30:
+ *
+ * 1. WL24xx packet drivers (tooasm.asm)
+ * 2. Access Point Firmware Interface Specification for IEEE 802.11 SUTRO
+ * 3. IEEE 802.11
+ * 4. Linux network driver (/usr/src/linux/drivers/net)
+ * 5. ISA card driver - wl24.c
+ * 6. Linux PCMCIA skeleton driver - skeleton.c
+ * 7. Linux PCMCIA 3c589 network driver - 3c589_cs.c
+ *
+ * Tested with WL2400 firmware 1.2, Linux 2.0.30, and pcmcia-cs-2.9.12
+ * 1. Performance: about 165 Kbytes/sec in TCP/IP with Ad-Hoc mode.
+ * rsh 192.168.1.3 "dd if=/dev/zero bs=1k count=1000" > /dev/null
+ * (Specification 2M bits/sec. is about 250 Kbytes/sec., but we must deduct
+ * ETHER/IP/UDP/TCP header, and acknowledgement overhead)
+ *
+ * Tested with Planet AP in 2.4.17, 184 Kbytes/s in UDP in Infrastructure mode,
+ * 173 Kbytes/s in TCP.
+ *
+ * Tested with Planet AP in 2.5.73-bk, 216 Kbytes/s in Infrastructure mode
+ * with a SMP machine (dual pentium 100), using pktgen, 432 pps (pkt_size = 60)
+ */
+#undef REALLY_SLOW_IO /* most systems can safely undef this */
+
+#include <linux/config.h>
+#include <linux/delay.h>
+#include <linux/types.h>
+#include <linux/ethtool.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/in.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/fcntl.h>
+#include <linux/if_arp.h>
+#include <linux/ioport.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/wireless.h>
+
+#include <net/iw_handler.h>
+
+#include <pcmcia/version.h>
+#include <pcmcia/cs_types.h>
+#include <pcmcia/cs.h>
+#include <pcmcia/cistpl.h>
+#include <pcmcia/cisreg.h>
+#include <pcmcia/ds.h>
+
+#include <asm/io.h>
+#include <asm/uaccess.h>
+#include <asm/system.h>
+
+#include "wl3501.h"
+
+#ifndef __i386__
+#define slow_down_io()
+#endif
+
+/* For rough constant delay */
+#define WL3501_NOPLOOP(n) { int x = 0; while (x++ < n) slow_down_io(); }
+
+/*
+ * All the PCMCIA modules use PCMCIA_DEBUG to control debugging. If you do not
+ * define PCMCIA_DEBUG at all, all the debug code will be left out. If you
+ * compile with PCMCIA_DEBUG=0, the debug code will be present but disabled --
+ * but it can then be enabled for specific modules at load time with a
+ * 'pc_debug=#' option to insmod.
+ */
+#define PCMCIA_DEBUG 0
+#ifdef PCMCIA_DEBUG
+static int pc_debug = PCMCIA_DEBUG;
+module_param(pc_debug, int, 0);
+#define dprintk(n, format, args...) \
+ { if (pc_debug > (n)) \
+ printk(KERN_INFO "%s: " format "\n", __FUNCTION__ , ##args); }
+#else
+#define dprintk(n, format, args...)
+#endif
+
+#define wl3501_outb(a, b) { outb(a, b); slow_down_io(); }
+#define wl3501_outb_p(a, b) { outb_p(a, b); slow_down_io(); }
+#define wl3501_outsb(a, b, c) { outsb(a, b, c); slow_down_io(); }
+
+#define WL3501_RELEASE_TIMEOUT (25 * HZ)
+#define WL3501_MAX_ADHOC_TRIES 16
+
+#define WL3501_RESUME 0
+#define WL3501_SUSPEND 1
+
+/*
+ * The event() function is this driver's Card Services event handler. It will
+ * be called by Card Services when an appropriate card status event is
+ * received. The config() and release() entry points are used to configure or
+ * release a socket, in response to card insertion and ejection events. They
+ * are invoked from the wl24 event handler.
+ */
+static void wl3501_config(dev_link_t *link);
+static void wl3501_release(dev_link_t *link);
+static int wl3501_event(event_t event, int pri, event_callback_args_t *args);
+
+/*
+ * The dev_info variable is the "key" that is used to match up this
+ * device driver with appropriate cards, through the card configuration
+ * database.
+ */
+static dev_info_t wl3501_dev_info = "wl3501_cs";
+
+static int wl3501_chan2freq[] = {
+ [0] = 2412, [1] = 2417, [2] = 2422, [3] = 2427, [4] = 2432,
+ [5] = 2437, [6] = 2442, [7] = 2447, [8] = 2452, [9] = 2457,
+ [10] = 2462, [11] = 2467, [12] = 2472, [13] = 2477,
+};
+
+static const struct {
+ int reg_domain;
+ int min, max, deflt;
+} iw_channel_table[] = {
+ {
+ .reg_domain = IW_REG_DOMAIN_FCC,
+ .min = 1,
+ .max = 11,
+ .deflt = 1,
+ },
+ {
+ .reg_domain = IW_REG_DOMAIN_DOC,
+ .min = 1,
+ .max = 11,
+ .deflt = 1,
+ },
+ {
+ .reg_domain = IW_REG_DOMAIN_ETSI,
+ .min = 1,
+ .max = 13,
+ .deflt = 1,
+ },
+ {
+ .reg_domain = IW_REG_DOMAIN_SPAIN,
+ .min = 10,
+ .max = 11,
+ .deflt = 10,
+ },
+ {
+ .reg_domain = IW_REG_DOMAIN_FRANCE,
+ .min = 10,
+ .max = 13,
+ .deflt = 10,
+ },
+ {
+ .reg_domain = IW_REG_DOMAIN_MKK,
+ .min = 14,
+ .max = 14,
+ .deflt = 14,
+ },
+ {
+ .reg_domain = IW_REG_DOMAIN_MKK1,
+ .min = 1,
+ .max = 14,
+ .deflt = 1,
+ },
+ {
+ .reg_domain = IW_REG_DOMAIN_ISRAEL,
+ .min = 3,
+ .max = 9,
+ .deflt = 9,
+ },
+};
+
+/**
+ * iw_valid_channel - validate channel in regulatory domain
+ * @reg_comain - regulatory domain
+ * @channel - channel to validate
+ *
+ * Returns 0 if invalid in the specified regulatory domain, non-zero if valid.
+ */
+static int iw_valid_channel(int reg_domain, int channel)
+{
+ int i, rc = 0;
+
+ for (i = 0; i < ARRAY_SIZE(iw_channel_table); i++)
+ if (reg_domain == iw_channel_table[i].reg_domain) {
+ rc = channel >= iw_channel_table[i].min &&
+ channel <= iw_channel_table[i].max;
+ break;
+ }
+ return rc;
+}
+
+/**
+ * iw_default_channel - get default channel for a regulatory domain
+ * @reg_comain - regulatory domain
+ *
+ * Returns the default channel for a regulatory domain
+ */
+static int iw_default_channel(int reg_domain)
+{
+ int i, rc = 1;
+
+ for (i = 0; i < ARRAY_SIZE(iw_channel_table); i++)
+ if (reg_domain == iw_channel_table[i].reg_domain) {
+ rc = iw_channel_table[i].deflt;
+ break;
+ }
+ return rc;
+}
+
+static void iw_set_mgmt_info_element(enum iw_mgmt_info_element_ids id,
+ struct iw_mgmt_info_element *el,
+ void *value, int len)
+{
+ el->id = id;
+ el->len = len;
+ memcpy(el->data, value, len);
+}
+
+static void iw_copy_mgmt_info_element(struct iw_mgmt_info_element *to,
+ struct iw_mgmt_info_element *from)
+{
+ iw_set_mgmt_info_element(from->id, to, from->data, from->len);
+}
+
+/*
+ * A linked list of "instances" of the wl24 device. Each actual PCMCIA card
+ * corresponds to one device instance, and is described by one dev_link_t
+ * structure (defined in ds.h).
+ *
+ * You may not want to use a linked list for this -- for example, the memory
+ * card driver uses an array of dev_link_t pointers, where minor device numbers
+ * are used to derive the corresponding array index.
+ */
+static dev_link_t *wl3501_dev_list;
+
+static inline void wl3501_switch_page(struct wl3501_card *this, u8 page)
+{
+ wl3501_outb(page, this->base_addr + WL3501_NIC_BSS);
+}
+
+/*
+ * Get Ethernet MAC addresss.
+ *
+ * WARNING: We switch to FPAGE0 and switc back again.
+ * Making sure there is no other WL function beening called by ISR.
+ */
+static int wl3501_get_flash_mac_addr(struct wl3501_card *this)
+{
+ int base_addr = this->base_addr;
+
+ /* get MAC addr */
+ wl3501_outb(WL3501_BSS_FPAGE3, base_addr + WL3501_NIC_BSS); /* BSS */
+ wl3501_outb(0x00, base_addr + WL3501_NIC_LMAL); /* LMAL */
+ wl3501_outb(0x40, base_addr + WL3501_NIC_LMAH); /* LMAH */
+
+ /* wait for reading EEPROM */
+ WL3501_NOPLOOP(100);
+ this->mac_addr[0] = inb(base_addr + WL3501_NIC_IODPA);
+ WL3501_NOPLOOP(100);
+ this->mac_addr[1] = inb(base_addr + WL3501_NIC_IODPA);
+ WL3501_NOPLOOP(100);
+ this->mac_addr[2] = inb(base_addr + WL3501_NIC_IODPA);
+ WL3501_NOPLOOP(100);
+ this->mac_addr[3] = inb(base_addr + WL3501_NIC_IODPA);
+ WL3501_NOPLOOP(100);
+ this->mac_addr[4] = inb(base_addr + WL3501_NIC_IODPA);
+ WL3501_NOPLOOP(100);
+ this->mac_addr[5] = inb(base_addr + WL3501_NIC_IODPA);
+ WL3501_NOPLOOP(100);
+ this->reg_domain = inb(base_addr + WL3501_NIC_IODPA);
+ WL3501_NOPLOOP(100);
+ wl3501_outb(WL3501_BSS_FPAGE0, base_addr + WL3501_NIC_BSS);
+ wl3501_outb(0x04, base_addr + WL3501_NIC_LMAL);
+ wl3501_outb(0x40, base_addr + WL3501_NIC_LMAH);
+ WL3501_NOPLOOP(100);
+ this->version[0] = inb(base_addr + WL3501_NIC_IODPA);
+ WL3501_NOPLOOP(100);
+ this->version[1] = inb(base_addr + WL3501_NIC_IODPA);
+ /* switch to SRAM Page 0 (for safety) */
+ wl3501_switch_page(this, WL3501_BSS_SPAGE0);
+
+ /* The MAC addr should be 00:60:... */
+ return this->mac_addr[0] == 0x00 && this->mac_addr[1] == 0x60;
+}
+
+/**
+ * wl3501_set_to_wla - Move 'size' bytes from PC to card
+ * @dest: Card addressing space
+ * @src: PC addressing space
+ * @size: Bytes to move
+ *
+ * Move 'size' bytes from PC to card. (Shouldn't be interrupted)
+ */
+void wl3501_set_to_wla(struct wl3501_card *this, u16 dest, void *src, int size)
+{
+ /* switch to SRAM Page 0 */
+ wl3501_switch_page(this, (dest & 0x8000) ? WL3501_BSS_SPAGE1 :
+ WL3501_BSS_SPAGE0);
+ /* set LMAL and LMAH */
+ wl3501_outb(dest & 0xff, this->base_addr + WL3501_NIC_LMAL);
+ wl3501_outb(((dest >> 8) & 0x7f), this->base_addr + WL3501_NIC_LMAH);
+
+ /* rep out to Port A */
+ wl3501_outsb(this->base_addr + WL3501_NIC_IODPA, src, size);
+}
+
+/**
+ * wl3501_get_from_wla - Move 'size' bytes from card to PC
+ * @src: Card addressing space
+ * @dest: PC addressing space
+ * @size: Bytes to move
+ *
+ * Move 'size' bytes from card to PC. (Shouldn't be interrupted)
+ */
+void wl3501_get_from_wla(struct wl3501_card *this, u16 src, void *dest,
+ int size)
+{
+ /* switch to SRAM Page 0 */
+ wl3501_switch_page(this, (src & 0x8000) ? WL3501_BSS_SPAGE1 :
+ WL3501_BSS_SPAGE0);
+ /* set LMAL and LMAH */
+ wl3501_outb(src & 0xff, this->base_addr + WL3501_NIC_LMAL);
+ wl3501_outb((src >> 8) & 0x7f, this->base_addr + WL3501_NIC_LMAH);
+
+ /* rep get from Port A */
+ insb(this->base_addr + WL3501_NIC_IODPA, dest, size);
+}
+
+/*
+ * Get/Allocate a free Tx Data Buffer
+ *
+ * *--------------*-----------------*----------------------------------*
+ * | PLCP | MAC Header | DST SRC Data ... |
+ * | (24 bytes) | (30 bytes) | (6) (6) (Ethernet Row Data) |
+ * *--------------*-----------------*----------------------------------*
+ * \ \- IEEE 802.11 -/ \-------------- len --------------/
+ * \-struct wl3501_80211_tx_hdr--/ \-------- Ethernet Frame -------/
+ *
+ * Return = Postion in Card
+ */
+static u16 wl3501_get_tx_buffer(struct wl3501_card *this, u16 len)
+{
+ u16 next, blk_cnt = 0, zero = 0;
+ u16 full_len = sizeof(struct wl3501_80211_tx_hdr) + len;
+ u16 ret = 0;
+
+ if (full_len > this->tx_buffer_cnt * 254)
+ goto out;
+ ret = this->tx_buffer_head;
+ while (full_len) {
+ if (full_len < 254)
+ full_len = 0;
+ else
+ full_len -= 254;
+ wl3501_get_from_wla(this, this->tx_buffer_head, &next,
+ sizeof(next));
+ if (!full_len)
+ wl3501_set_to_wla(this, this->tx_buffer_head, &zero,
+ sizeof(zero));
+ this->tx_buffer_head = next;
+ blk_cnt++;
+ /* if buffer is not enough */
+ if (!next && full_len) {
+ this->tx_buffer_head = ret;
+ ret = 0;
+ goto out;
+ }
+ }
+ this->tx_buffer_cnt -= blk_cnt;
+out:
+ return ret;
+}
+
+/*
+ * Free an allocated Tx Buffer. ptr must be correct position.
+ */
+static void wl3501_free_tx_buffer(struct wl3501_card *this, u16 ptr)
+{
+ /* check if all space is not free */
+ if (!this->tx_buffer_head)
+ this->tx_buffer_head = ptr;
+ else
+ wl3501_set_to_wla(this, this->tx_buffer_tail,
+ &ptr, sizeof(ptr));
+ while (ptr) {
+ u16 next;
+
+ this->tx_buffer_cnt++;
+ wl3501_get_from_wla(this, ptr, &next, sizeof(next));
+ this->tx_buffer_tail = ptr;
+ ptr = next;
+ }
+}
+
+static int wl3501_esbq_req_test(struct wl3501_card *this)
+{
+ u8 tmp;
+
+ wl3501_get_from_wla(this, this->esbq_req_head + 3, &tmp, sizeof(tmp));
+ return tmp & 0x80;
+}
+
+static void wl3501_esbq_req(struct wl3501_card *this, u16 *ptr)
+{
+ u16 tmp = 0;
+
+ wl3501_set_to_wla(this, this->esbq_req_head, ptr, 2);
+ wl3501_set_to_wla(this, this->esbq_req_head + 2, &tmp, sizeof(tmp));
+ this->esbq_req_head += 4;
+ if (this->esbq_req_head >= this->esbq_req_end)
+ this->esbq_req_head = this->esbq_req_start;
+}
+
+static int wl3501_esbq_exec(struct wl3501_card *this, void *sig, int sig_size)
+{
+ int rc = -EIO;
+
+ if (wl3501_esbq_req_test(this)) {
+ u16 ptr = wl3501_get_tx_buffer(this, sig_size);
+ if (ptr) {
+ wl3501_set_to_wla(this, ptr, sig, sig_size);
+ wl3501_esbq_req(this, &ptr);
+ rc = 0;
+ }
+ }
+ return rc;
+}
+
+static int wl3501_get_mib_value(struct wl3501_card *this, u8 index,
+ void *bf, int size)
+{
+ struct wl3501_get_req sig = {
+ .sig_id = WL3501_SIG_GET_REQ,
+ .mib_attrib = index,
+ };
+ unsigned long flags;
+ int rc = -EIO;
+
+ spin_lock_irqsave(&this->lock, flags);
+ if (wl3501_esbq_req_test(this)) {
+ u16 ptr = wl3501_get_tx_buffer(this, sizeof(sig));
+ if (ptr) {
+ wl3501_set_to_wla(this, ptr, &sig, sizeof(sig));
+ wl3501_esbq_req(this, &ptr);
+ this->sig_get_confirm.mib_status = 255;
+ spin_unlock_irqrestore(&this->lock, flags);
+ rc = wait_event_interruptible(this->wait,
+ this->sig_get_confirm.mib_status != 255);
+ if (!rc)
+ memcpy(bf, this->sig_get_confirm.mib_value,
+ size);
+ goto out;
+ }
+ }
+ spin_unlock_irqrestore(&this->lock, flags);
+out:
+ return rc;
+}
+
+static int wl3501_pwr_mgmt(struct wl3501_card *this, int suspend)
+{
+ struct wl3501_pwr_mgmt_req sig = {
+ .sig_id = WL3501_SIG_PWR_MGMT_REQ,
+ .pwr_save = suspend,
+ .wake_up = !suspend,
+ .receive_dtims = 10,
+ };
+ unsigned long flags;
+ int rc = -EIO;
+
+ spin_lock_irqsave(&this->lock, flags);
+ if (wl3501_esbq_req_test(this)) {
+ u16 ptr = wl3501_get_tx_buffer(this, sizeof(sig));
+ if (ptr) {
+ wl3501_set_to_wla(this, ptr, &sig, sizeof(sig));
+ wl3501_esbq_req(this, &ptr);
+ this->sig_pwr_mgmt_confirm.status = 255;
+ spin_unlock_irqrestore(&this->lock, flags);
+ rc = wait_event_interruptible(this->wait,
+ this->sig_pwr_mgmt_confirm.status != 255);
+ printk(KERN_INFO "%s: %s status=%d\n", __FUNCTION__,
+ suspend ? "suspend" : "resume",
+ this->sig_pwr_mgmt_confirm.status);
+ goto out;
+ }
+ }
+ spin_unlock_irqrestore(&this->lock, flags);
+out:
+ return rc;
+}
+
+/**
+ * wl3501_send_pkt - Send a packet.
+ * @this - card
+ *
+ * Send a packet.
+ *
+ * data = Ethernet raw frame. (e.g. data[0] - data[5] is Dest MAC Addr,
+ * data[6] - data[11] is Src MAC Addr)
+ * Ref: IEEE 802.11
+ */
+static int wl3501_send_pkt(struct wl3501_card *this, u8 *data, u16 len)
+{
+ u16 bf, sig_bf, next, tmplen, pktlen;
+ struct wl3501_md_req sig = {
+ .sig_id = WL3501_SIG_MD_REQ,
+ };
+ u8 *pdata = (char *)data;
+ int rc = -EIO;
+
+ if (wl3501_esbq_req_test(this)) {
+ sig_bf = wl3501_get_tx_buffer(this, sizeof(sig));
+ rc = -ENOMEM;
+ if (!sig_bf) /* No free buffer available */
+ goto out;
+ bf = wl3501_get_tx_buffer(this, len + 26 + 24);
+ if (!bf) {
+ /* No free buffer available */
+ wl3501_free_tx_buffer(this, sig_bf);
+ goto out;
+ }
+ rc = 0;
+ memcpy(&sig.daddr[0], pdata, 12);
+ pktlen = len - 12;
+ pdata += 12;
+ sig.data = bf;
+ if (((*pdata) * 256 + (*(pdata + 1))) > 1500) {
+ u8 addr4[ETH_ALEN] = {
+ [0] = 0xAA, [1] = 0xAA, [2] = 0x03, [4] = 0x00,
+ };
+
+ wl3501_set_to_wla(this, bf + 2 +
+ offsetof(struct wl3501_tx_hdr, addr4),
+ addr4, sizeof(addr4));
+ sig.size = pktlen + 24 + 4 + 6;
+ if (pktlen > (254 - sizeof(struct wl3501_tx_hdr))) {
+ tmplen = 254 - sizeof(struct wl3501_tx_hdr);
+ pktlen -= tmplen;
+ } else {
+ tmplen = pktlen;
+ pktlen = 0;
+ }
+ wl3501_set_to_wla(this,
+ bf + 2 + sizeof(struct wl3501_tx_hdr),
+ pdata, tmplen);
+ pdata += tmplen;
+ wl3501_get_from_wla(this, bf, &next, sizeof(next));
+ bf = next;
+ } else {
+ sig.size = pktlen + 24 + 4 - 2;
+ pdata += 2;
+ pktlen -= 2;
+ if (pktlen > (254 - sizeof(struct wl3501_tx_hdr) + 6)) {
+ tmplen = 254 - sizeof(struct wl3501_tx_hdr) + 6;
+ pktlen -= tmplen;
+ } else {
+ tmplen = pktlen;
+ pktlen = 0;
+ }
+ wl3501_set_to_wla(this, bf + 2 +
+ offsetof(struct wl3501_tx_hdr, addr4),
+ pdata, tmplen);
+ pdata += tmplen;
+ wl3501_get_from_wla(this, bf, &next, sizeof(next));
+ bf = next;
+ }
+ while (pktlen > 0) {
+ if (pktlen > 254) {
+ tmplen = 254;
+ pktlen -= 254;
+ } else {
+ tmplen = pktlen;
+ pktlen = 0;
+ }
+ wl3501_set_to_wla(this, bf + 2, pdata, tmplen);
+ pdata += tmplen;
+ wl3501_get_from_wla(this, bf, &next, sizeof(next));
+ bf = next;
+ }
+ wl3501_set_to_wla(this, sig_bf, &sig, sizeof(sig));
+ wl3501_esbq_req(this, &sig_bf);
+ }
+out:
+ return rc;
+}
+
+static int wl3501_mgmt_resync(struct wl3501_card *this)
+{
+ struct wl3501_resync_req sig = {
+ .sig_id = WL3501_SIG_RESYNC_REQ,
+ };
+
+ return wl3501_esbq_exec(this, &sig, sizeof(sig));
+}
+
+static inline int wl3501_fw_bss_type(struct wl3501_card *this)
+{
+ return this->net_type == IW_MODE_INFRA ? WL3501_NET_TYPE_INFRA :
+ WL3501_NET_TYPE_ADHOC;
+}
+
+static inline int wl3501_fw_cap_info(struct wl3501_card *this)
+{
+ return this->net_type == IW_MODE_INFRA ? WL3501_MGMT_CAPABILITY_ESS :
+ WL3501_MGMT_CAPABILITY_IBSS;
+}
+
+static int wl3501_mgmt_scan(struct wl3501_card *this, u16 chan_time)
+{
+ struct wl3501_scan_req sig = {
+ .sig_id = WL3501_SIG_SCAN_REQ,
+ .scan_type = WL3501_SCAN_TYPE_ACTIVE,
+ .probe_delay = 0x10,
+ .min_chan_time = chan_time,
+ .max_chan_time = chan_time,
+ .bss_type = wl3501_fw_bss_type(this),
+ };
+
+ this->bss_cnt = this->join_sta_bss = 0;
+ return wl3501_esbq_exec(this, &sig, sizeof(sig));
+}
+
+static int wl3501_mgmt_join(struct wl3501_card *this, u16 stas)
+{
+ struct wl3501_join_req sig = {
+ .sig_id = WL3501_SIG_JOIN_REQ,
+ .timeout = 10,
+ .ds_pset = {
+ .el = {
+ .id = IW_MGMT_INFO_ELEMENT_DS_PARAMETER_SET,
+ .len = 1,
+ },
+ .chan = this->chan,
+ },
+ };
+
+ memcpy(&sig.beacon_period, &this->bss_set[stas].beacon_period, 72);
+ return wl3501_esbq_exec(this, &sig, sizeof(sig));
+}
+
+static int wl3501_mgmt_start(struct wl3501_card *this)
+{
+ struct wl3501_start_req sig = {
+ .sig_id = WL3501_SIG_START_REQ,
+ .beacon_period = 400,
+ .dtim_period = 1,
+ .ds_pset = {
+ .el = {
+ .id = IW_MGMT_INFO_ELEMENT_DS_PARAMETER_SET,
+ .len = 1,
+ },
+ .chan = this->chan,
+ },
+ .bss_basic_rset = {
+ .el = {
+ .id = IW_MGMT_INFO_ELEMENT_SUPPORTED_RATES,
+ .len = 2,
+ },
+ .data_rate_labels = {
+ [0] = IW_MGMT_RATE_LABEL_MANDATORY |
+ IW_MGMT_RATE_LABEL_1MBIT,
+ [1] = IW_MGMT_RATE_LABEL_MANDATORY |
+ IW_MGMT_RATE_LABEL_2MBIT,
+ },
+ },
+ .operational_rset = {
+ .el = {
+ .id = IW_MGMT_INFO_ELEMENT_SUPPORTED_RATES,
+ .len = 2,
+ },
+ .data_rate_labels = {
+ [0] = IW_MGMT_RATE_LABEL_MANDATORY |
+ IW_MGMT_RATE_LABEL_1MBIT,
+ [1] = IW_MGMT_RATE_LABEL_MANDATORY |
+ IW_MGMT_RATE_LABEL_2MBIT,
+ },
+ },
+ .ibss_pset = {
+ .el = {
+ .id = IW_MGMT_INFO_ELEMENT_IBSS_PARAMETER_SET,
+ .len = 2,
+ },
+ .atim_window = 10,
+ },
+ .bss_type = wl3501_fw_bss_type(this),
+ .cap_info = wl3501_fw_cap_info(this),
+ };
+
+ iw_copy_mgmt_info_element(&sig.ssid.el, &this->essid.el);
+ iw_copy_mgmt_info_element(&this->keep_essid.el, &this->essid.el);
+ return wl3501_esbq_exec(this, &sig, sizeof(sig));
+}
+
+static void wl3501_mgmt_scan_confirm(struct wl3501_card *this, u16 addr)
+{
+ u16 i = 0;
+ int matchflag = 0;
+ struct wl3501_scan_confirm sig;
+
+ dprintk(3, "entry");
+ wl3501_get_from_wla(this, addr, &sig, sizeof(sig));
+ if (sig.status == WL3501_STATUS_SUCCESS) {
+ dprintk(3, "success");
+ if ((this->net_type == IW_MODE_INFRA &&
+ (sig.cap_info & WL3501_MGMT_CAPABILITY_ESS)) ||
+ (this->net_type == IW_MODE_ADHOC &&
+ (sig.cap_info & WL3501_MGMT_CAPABILITY_IBSS)) ||
+ this->net_type == IW_MODE_AUTO) {
+ if (!this->essid.el.len)
+ matchflag = 1;
+ else if (this->essid.el.len == 3 &&
+ !memcmp(this->essid.essid, "ANY", 3))
+ matchflag = 1;
+ else if (this->essid.el.len != sig.ssid.el.len)
+ matchflag = 0;
+ else if (memcmp(this->essid.essid, sig.ssid.essid,
+ this->essid.el.len))
+ matchflag = 0;
+ else
+ matchflag = 1;
+ if (matchflag) {
+ for (i = 0; i < this->bss_cnt; i++) {
+ if (!memcmp(this->bss_set[i].bssid,
+ sig.bssid, ETH_ALEN)) {
+ matchflag = 0;
+ break;
+ }
+ }
+ }
+ if (matchflag && (i < 20)) {
+ memcpy(&this->bss_set[i].beacon_period,
+ &sig.beacon_period, 73);
+ this->bss_cnt++;
+ this->rssi = sig.rssi;
+ }
+ }
+ } else if (sig.status == WL3501_STATUS_TIMEOUT) {
+ dprintk(3, "timeout");
+ this->join_sta_bss = 0;
+ for (i = this->join_sta_bss; i < this->bss_cnt; i++)
+ if (!wl3501_mgmt_join(this, i))
+ break;
+ this->join_sta_bss = i;
+ if (this->join_sta_bss == this->bss_cnt) {
+ if (this->net_type == IW_MODE_INFRA)
+ wl3501_mgmt_scan(this, 100);
+ else {
+ this->adhoc_times++;
+ if (this->adhoc_times > WL3501_MAX_ADHOC_TRIES)
+ wl3501_mgmt_start(this);
+ else
+ wl3501_mgmt_scan(this, 100);
+ }
+ }
+ }
+}
+
+/**
+ * wl3501_block_interrupt - Mask interrupt from SUTRO
+ * @this - card
+ *
+ * Mask interrupt from SUTRO. (i.e. SUTRO cannot interrupt the HOST)
+ * Return: 1 if interrupt is originally enabled
+ */
+static int wl3501_block_interrupt(struct wl3501_card *this)
+{
+ u8 old = inb(this->base_addr + WL3501_NIC_GCR);
+ u8 new = old & (~(WL3501_GCR_ECINT | WL3501_GCR_INT2EC |
+ WL3501_GCR_ENECINT));
+
+ wl3501_outb(new, this->base_addr + WL3501_NIC_GCR);
+ return old & WL3501_GCR_ENECINT;
+}
+
+/**
+ * wl3501_unblock_interrupt - Enable interrupt from SUTRO
+ * @this - card
+ *
+ * Enable interrupt from SUTRO. (i.e. SUTRO can interrupt the HOST)
+ * Return: 1 if interrupt is originally enabled
+ */
+static int wl3501_unblock_interrupt(struct wl3501_card *this)
+{
+ u8 old = inb(this->base_addr + WL3501_NIC_GCR);
+ u8 new = (old & ~(WL3501_GCR_ECINT | WL3501_GCR_INT2EC)) |
+ WL3501_GCR_ENECINT;
+
+ wl3501_outb(new, this->base_addr + WL3501_NIC_GCR);
+ return old & WL3501_GCR_ENECINT;
+}
+
+/**
+ * wl3501_receive - Receive data from Receive Queue.
+ *
+ * Receive data from Receive Queue.
+ *
+ * @this: card
+ * @bf: address of host
+ * @size: size of buffer.
+ */
+static u16 wl3501_receive(struct wl3501_card *this, u8 *bf, u16 size)
+{
+ u16 next_addr, next_addr1;
+ u8 *data = bf + 12;
+
+ size -= 12;
+ wl3501_get_from_wla(this, this->start_seg + 2,
+ &next_addr, sizeof(next_addr));
+ if (size > WL3501_BLKSZ - sizeof(struct wl3501_rx_hdr)) {
+ wl3501_get_from_wla(this,
+ this->start_seg +
+ sizeof(struct wl3501_rx_hdr), data,
+ WL3501_BLKSZ -
+ sizeof(struct wl3501_rx_hdr));
+ size -= WL3501_BLKSZ - sizeof(struct wl3501_rx_hdr);
+ data += WL3501_BLKSZ - sizeof(struct wl3501_rx_hdr);
+ } else {
+ wl3501_get_from_wla(this,
+ this->start_seg +
+ sizeof(struct wl3501_rx_hdr),
+ data, size);
+ size = 0;
+ }
+ while (size > 0) {
+ if (size > WL3501_BLKSZ - 5) {
+ wl3501_get_from_wla(this, next_addr + 5, data,
+ WL3501_BLKSZ - 5);
+ size -= WL3501_BLKSZ - 5;
+ data += WL3501_BLKSZ - 5;
+ wl3501_get_from_wla(this, next_addr + 2, &next_addr1,
+ sizeof(next_addr1));
+ next_addr = next_addr1;
+ } else {
+ wl3501_get_from_wla(this, next_addr + 5, data, size);
+ size = 0;
+ }
+ }
+ return 0;
+}
+
+static void wl3501_esbq_req_free(struct wl3501_card *this)
+{
+ u8 tmp;
+ u16 addr;
+
+ if (this->esbq_req_head == this->esbq_req_tail)
+ goto out;
+ wl3501_get_from_wla(this, this->esbq_req_tail + 3, &tmp, sizeof(tmp));
+ if (!(tmp & 0x80))
+ goto out;
+ wl3501_get_from_wla(this, this->esbq_req_tail, &addr, sizeof(addr));
+ wl3501_free_tx_buffer(this, addr);
+ this->esbq_req_tail += 4;
+ if (this->esbq_req_tail >= this->esbq_req_end)
+ this->esbq_req_tail = this->esbq_req_start;
+out:
+ return;
+}
+
+static int wl3501_esbq_confirm(struct wl3501_card *this)
+{
+ u8 tmp;
+
+ wl3501_get_from_wla(this, this->esbq_confirm + 3, &tmp, sizeof(tmp));
+ return tmp & 0x80;
+}
+
+static void wl3501_online(struct net_device *dev)
+{
+ struct wl3501_card *this = dev->priv;
+
+ printk(KERN_INFO "%s: Wireless LAN online. BSSID: "
+ "%02X %02X %02X %02X %02X %02X\n", dev->name,
+ this->bssid[0], this->bssid[1], this->bssid[2],
+ this->bssid[3], this->bssid[4], this->bssid[5]);
+ netif_wake_queue(dev);
+}
+
+static void wl3501_esbq_confirm_done(struct wl3501_card *this)
+{
+ u8 tmp = 0;
+
+ wl3501_set_to_wla(this, this->esbq_confirm + 3, &tmp, sizeof(tmp));
+ this->esbq_confirm += 4;
+ if (this->esbq_confirm >= this->esbq_confirm_end)
+ this->esbq_confirm = this->esbq_confirm_start;
+}
+
+static int wl3501_mgmt_auth(struct wl3501_card *this)
+{
+ struct wl3501_auth_req sig = {
+ .sig_id = WL3501_SIG_AUTH_REQ,
+ .type = WL3501_SYS_TYPE_OPEN,
+ .timeout = 1000,
+ };
+
+ dprintk(3, "entry");
+ memcpy(sig.mac_addr, this->bssid, ETH_ALEN);
+ return wl3501_esbq_exec(this, &sig, sizeof(sig));
+}
+
+static int wl3501_mgmt_association(struct wl3501_card *this)
+{
+ struct wl3501_assoc_req sig = {
+ .sig_id = WL3501_SIG_ASSOC_REQ,
+ .timeout = 1000,
+ .listen_interval = 5,
+ .cap_info = this->cap_info,
+ };
+
+ dprintk(3, "entry");
+ memcpy(sig.mac_addr, this->bssid, ETH_ALEN);
+ return wl3501_esbq_exec(this, &sig, sizeof(sig));
+}
+
+static void wl3501_mgmt_join_confirm(struct net_device *dev, u16 addr)
+{
+ struct wl3501_card *this = dev->priv;
+ struct wl3501_join_confirm sig;
+
+ dprintk(3, "entry");
+ wl3501_get_from_wla(this, addr, &sig, sizeof(sig));
+ if (sig.status == WL3501_STATUS_SUCCESS) {
+ if (this->net_type == IW_MODE_INFRA) {
+ if (this->join_sta_bss < this->bss_cnt) {
+ const int i = this->join_sta_bss;
+ memcpy(this->bssid,
+ this->bss_set[i].bssid, ETH_ALEN);
+ this->chan = this->bss_set[i].ds_pset.chan;
+ iw_copy_mgmt_info_element(&this->keep_essid.el,
+ &this->bss_set[i].ssid.el);
+ wl3501_mgmt_auth(this);
+ }
+ } else {
+ const int i = this->join_sta_bss;
+
+ memcpy(&this->bssid, &this->bss_set[i].bssid, ETH_ALEN);
+ this->chan = this->bss_set[i].ds_pset.chan;
+ iw_copy_mgmt_info_element(&this->keep_essid.el,
+ &this->bss_set[i].ssid.el);
+ wl3501_online(dev);
+ }
+ } else {
+ int i;
+ this->join_sta_bss++;
+ for (i = this->join_sta_bss; i < this->bss_cnt; i++)
+ if (!wl3501_mgmt_join(this, i))
+ break;
+ this->join_sta_bss = i;
+ if (this->join_sta_bss == this->bss_cnt) {
+ if (this->net_type == IW_MODE_INFRA)
+ wl3501_mgmt_scan(this, 100);
+ else {
+ this->adhoc_times++;
+ if (this->adhoc_times > WL3501_MAX_ADHOC_TRIES)
+ wl3501_mgmt_start(this);
+ else
+ wl3501_mgmt_scan(this, 100);
+ }
+ }
+ }
+}
+
+static inline void wl3501_alarm_interrupt(struct net_device *dev,
+ struct wl3501_card *this)
+{
+ if (this->net_type == IW_MODE_INFRA) {
+ printk(KERN_INFO "Wireless LAN offline\n");
+ netif_stop_queue(dev);
+ wl3501_mgmt_resync(this);
+ }
+}
+
+static inline void wl3501_md_confirm_interrupt(struct net_device *dev,
+ struct wl3501_card *this,
+ u16 addr)
+{
+ struct wl3501_md_confirm sig;
+
+ dprintk(3, "entry");
+ wl3501_get_from_wla(this, addr, &sig, sizeof(sig));
+ wl3501_free_tx_buffer(this, sig.data);
+ if (netif_queue_stopped(dev))
+ netif_wake_queue(dev);
+}
+
+static inline void wl3501_md_ind_interrupt(struct net_device *dev,
+ struct wl3501_card *this, u16 addr)
+{
+ struct wl3501_md_ind sig;
+ struct sk_buff *skb;
+ u8 rssi, addr4[ETH_ALEN];
+ u16 pkt_len;
+
+ wl3501_get_from_wla(this, addr, &sig, sizeof(sig));
+ this->start_seg = sig.data;
+ wl3501_get_from_wla(this,
+ sig.data + offsetof(struct wl3501_rx_hdr, rssi),
+ &rssi, sizeof(rssi));
+ this->rssi = rssi <= 63 ? (rssi * 100) / 64 : 255;
+
+ wl3501_get_from_wla(this,
+ sig.data +
+ offsetof(struct wl3501_rx_hdr, addr4),
+ &addr4, sizeof(addr4));
+ if (!(addr4[0] == 0xAA && addr4[1] == 0xAA &&
+ addr4[2] == 0x03 && addr4[4] == 0x00)) {
+ printk(KERN_INFO "Insupported packet type!\n");
+ return;
+ }
+ pkt_len = sig.size + 12 - 24 - 4 - 6;
+
+ skb = dev_alloc_skb(pkt_len + 5);
+
+ if (!skb) {
+ printk(KERN_WARNING "%s: Can't alloc a sk_buff of size %d.\n",
+ dev->name, pkt_len);
+ this->stats.rx_dropped++;
+ } else {
+ skb->dev = dev;
+ skb_reserve(skb, 2); /* IP headers on 16 bytes boundaries */
+ eth_copy_and_sum(skb, (unsigned char *)&sig.daddr, 12, 0);
+ wl3501_receive(this, skb->data, pkt_len);
+ skb_put(skb, pkt_len);
+ skb->protocol = eth_type_trans(skb, dev);
+ dev->last_rx = jiffies;
+ this->stats.rx_packets++;
+ this->stats.rx_bytes += skb->len;
+ netif_rx(skb);
+ }
+}
+
+static inline void wl3501_get_confirm_interrupt(struct wl3501_card *this,
+ u16 addr, void *sig, int size)
+{
+ dprintk(3, "entry");
+ wl3501_get_from_wla(this, addr, &this->sig_get_confirm,
+ sizeof(this->sig_get_confirm));
+ wake_up(&this->wait);
+}
+
+static inline void wl3501_start_confirm_interrupt(struct net_device *dev,
+ struct wl3501_card *this,
+ u16 addr)
+{
+ struct wl3501_start_confirm sig;
+
+ dprintk(3, "entry");
+ wl3501_get_from_wla(this, addr, &sig, sizeof(sig));
+ if (sig.status == WL3501_STATUS_SUCCESS)
+ netif_wake_queue(dev);
+}
+
+static inline void wl3501_assoc_confirm_interrupt(struct net_device *dev,
+ u16 addr)
+{
+ struct wl3501_card *this = dev->priv;
+ struct wl3501_assoc_confirm sig;
+
+ dprintk(3, "entry");
+ wl3501_get_from_wla(this, addr, &sig, sizeof(sig));
+
+ if (sig.status == WL3501_STATUS_SUCCESS)
+ wl3501_online(dev);
+}
+
+static inline void wl3501_auth_confirm_interrupt(struct wl3501_card *this,
+ u16 addr)
+{
+ struct wl3501_auth_confirm sig;
+
+ dprintk(3, "entry");
+ wl3501_get_from_wla(this, addr, &sig, sizeof(sig));
+
+ if (sig.status == WL3501_STATUS_SUCCESS)
+ wl3501_mgmt_association(this);
+ else
+ wl3501_mgmt_resync(this);
+}
+
+static inline void wl3501_rx_interrupt(struct net_device *dev)
+{
+ int morepkts;
+ u16 addr;
+ u8 sig_id;
+ struct wl3501_card *this = dev->priv;
+
+ dprintk(3, "entry");
+loop:
+ morepkts = 0;
+ if (!wl3501_esbq_confirm(this))
+ goto free;
+ wl3501_get_from_wla(this, this->esbq_confirm, &addr, sizeof(addr));
+ wl3501_get_from_wla(this, addr + 2, &sig_id, sizeof(sig_id));
+
+ switch (sig_id) {
+ case WL3501_SIG_DEAUTH_IND:
+ case WL3501_SIG_DISASSOC_IND:
+ case WL3501_SIG_ALARM:
+ wl3501_alarm_interrupt(dev, this);
+ break;
+ case WL3501_SIG_MD_CONFIRM:
+ wl3501_md_confirm_interrupt(dev, this, addr);
+ break;
+ case WL3501_SIG_MD_IND:
+ wl3501_md_ind_interrupt(dev, this, addr);
+ break;
+ case WL3501_SIG_GET_CONFIRM:
+ wl3501_get_confirm_interrupt(this, addr,
+ &this->sig_get_confirm,
+ sizeof(this->sig_get_confirm));
+ break;
+ case WL3501_SIG_PWR_MGMT_CONFIRM:
+ wl3501_get_confirm_interrupt(this, addr,
+ &this->sig_pwr_mgmt_confirm,
+ sizeof(this->sig_pwr_mgmt_confirm));
+ break;
+ case WL3501_SIG_START_CONFIRM:
+ wl3501_start_confirm_interrupt(dev, this, addr);
+ break;
+ case WL3501_SIG_SCAN_CONFIRM:
+ wl3501_mgmt_scan_confirm(this, addr);
+ break;
+ case WL3501_SIG_JOIN_CONFIRM:
+ wl3501_mgmt_join_confirm(dev, addr);
+ break;
+ case WL3501_SIG_ASSOC_CONFIRM:
+ wl3501_assoc_confirm_interrupt(dev, addr);
+ break;
+ case WL3501_SIG_AUTH_CONFIRM:
+ wl3501_auth_confirm_interrupt(this, addr);
+ break;
+ case WL3501_SIG_RESYNC_CONFIRM:
+ wl3501_mgmt_resync(this); /* FIXME: should be resync_confirm */
+ break;
+ }
+ wl3501_esbq_confirm_done(this);
+ morepkts = 1;
+ /* free request if necessary */
+free:
+ wl3501_esbq_req_free(this);
+ if (morepkts)
+ goto loop;
+}
+
+static inline void wl3501_ack_interrupt(struct wl3501_card *this)
+{
+ wl3501_outb(WL3501_GCR_ECINT, this->base_addr + WL3501_NIC_GCR);
+}
+
+/**
+ * wl3501_interrupt - Hardware interrupt from card.
+ * @irq - Interrupt number
+ * @dev_id - net_device
+ * @regs - registers
+ *
+ * We must acknowledge the interrupt as soon as possible, and block the
+ * interrupt from the same card immediately to prevent re-entry.
+ *
+ * Before accessing the Control_Status_Block, we must lock SUTRO first.
+ * On the other hand, to prevent SUTRO from malfunctioning, we must
+ * unlock the SUTRO as soon as possible.
+ */
+static irqreturn_t wl3501_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct net_device *dev = (struct net_device *)dev_id;
+ struct wl3501_card *this;
+ int handled = 1;
+
+ if (!dev)
+ goto unknown;
+ this = dev->priv;
+ spin_lock(&this->lock);
+ wl3501_ack_interrupt(this);
+ wl3501_block_interrupt(this);
+ wl3501_rx_interrupt(dev);
+ wl3501_unblock_interrupt(this);
+ spin_unlock(&this->lock);
+out:
+ return IRQ_RETVAL(handled);
+unknown:
+ handled = 0;
+ printk(KERN_ERR "%s: irq %d for unknown device.\n", __FUNCTION__, irq);
+ goto out;
+}
+
+static int wl3501_reset_board(struct wl3501_card *this)
+{
+ u8 tmp = 0;
+ int i, rc = 0;
+
+ /* Coreset */
+ wl3501_outb_p(WL3501_GCR_CORESET, this->base_addr + WL3501_NIC_GCR);
+ wl3501_outb_p(0, this->base_addr + WL3501_NIC_GCR);
+ wl3501_outb_p(WL3501_GCR_CORESET, this->base_addr + WL3501_NIC_GCR);
+
+ /* Reset SRAM 0x480 to zero */
+ wl3501_set_to_wla(this, 0x480, &tmp, sizeof(tmp));
+
+ /* Start up */
+ wl3501_outb_p(0, this->base_addr + WL3501_NIC_GCR);
+
+ WL3501_NOPLOOP(1024 * 50);
+
+ wl3501_unblock_interrupt(this); /* acme: was commented */
+
+ /* Polling Self_Test_Status */
+ for (i = 0; i < 10000; i++) {
+ wl3501_get_from_wla(this, 0x480, &tmp, sizeof(tmp));
+
+ if (tmp == 'W') {
+ /* firmware complete all test successfully */
+ tmp = 'A';
+ wl3501_set_to_wla(this, 0x480, &tmp, sizeof(tmp));
+ goto out;
+ }
+ WL3501_NOPLOOP(10);
+ }
+ printk(KERN_WARNING "%s: failed to reset the board!\n", __FUNCTION__);
+ rc = -ENODEV;
+out:
+ return rc;
+}
+
+static int wl3501_init_firmware(struct wl3501_card *this)
+{
+ u16 ptr, next;
+ int rc = wl3501_reset_board(this);
+
+ if (rc)
+ goto fail;
+ this->card_name[0] = '\0';
+ wl3501_get_from_wla(this, 0x1a00,
+ this->card_name, sizeof(this->card_name));
+ this->card_name[sizeof(this->card_name) - 1] = '\0';
+ this->firmware_date[0] = '\0';
+ wl3501_get_from_wla(this, 0x1a40,
+ this->firmware_date, sizeof(this->firmware_date));
+ this->firmware_date[sizeof(this->firmware_date) - 1] = '\0';
+ /* Switch to SRAM Page 0 */
+ wl3501_switch_page(this, WL3501_BSS_SPAGE0);
+ /* Read parameter from card */
+ wl3501_get_from_wla(this, 0x482, &this->esbq_req_start, 2);
+ wl3501_get_from_wla(this, 0x486, &this->esbq_req_end, 2);
+ wl3501_get_from_wla(this, 0x488, &this->esbq_confirm_start, 2);
+ wl3501_get_from_wla(this, 0x48c, &this->esbq_confirm_end, 2);
+ wl3501_get_from_wla(this, 0x48e, &this->tx_buffer_head, 2);
+ wl3501_get_from_wla(this, 0x492, &this->tx_buffer_size, 2);
+ this->esbq_req_tail = this->esbq_req_head = this->esbq_req_start;
+ this->esbq_req_end += this->esbq_req_start;
+ this->esbq_confirm = this->esbq_confirm_start;
+ this->esbq_confirm_end += this->esbq_confirm_start;
+ /* Initial Tx Buffer */
+ this->tx_buffer_cnt = 1;
+ ptr = this->tx_buffer_head;
+ next = ptr + WL3501_BLKSZ;
+ while ((next - this->tx_buffer_head) < this->tx_buffer_size) {
+ this->tx_buffer_cnt++;
+ wl3501_set_to_wla(this, ptr, &next, sizeof(next));
+ ptr = next;
+ next = ptr + WL3501_BLKSZ;
+ }
+ rc = 0;
+ next = 0;
+ wl3501_set_to_wla(this, ptr, &next, sizeof(next));
+ this->tx_buffer_tail = ptr;
+out:
+ return rc;
+fail:
+ printk(KERN_WARNING "%s: failed!\n", __FUNCTION__);
+ goto out;
+}
+
+static int wl3501_close(struct net_device *dev)
+{
+ struct wl3501_card *this = dev->priv;
+ int rc = -ENODEV;
+ unsigned long flags;
+ dev_link_t *link;
+
+ spin_lock_irqsave(&this->lock, flags);
+ /* Check if the device is in wl3501_dev_list */
+ for (link = wl3501_dev_list; link; link = link->next)
+ if (link->priv == dev)
+ break;
+ if (!link)
+ goto out;
+ link->open--;
+
+ /* Stop wl3501_hard_start_xmit() from now on */
+ netif_stop_queue(dev);
+ wl3501_ack_interrupt(this);
+
+ /* Mask interrupts from the SUTRO */
+ wl3501_block_interrupt(this);
+
+ rc = 0;
+ printk(KERN_INFO "%s: WL3501 closed\n", dev->name);
+out:
+ spin_unlock_irqrestore(&this->lock, flags);
+ return rc;
+}
+
+/**
+ * wl3501_reset - Reset the SUTRO.
+ * @dev - network device
+ *
+ * It is almost the same as wl3501_open(). In fact, we may just wl3501_close()
+ * and wl3501_open() again, but I wouldn't like to free_irq() when the driver
+ * is running. It seems to be dangerous.
+ */
+static int wl3501_reset(struct net_device *dev)
+{
+ struct wl3501_card *this = dev->priv;
+ int rc = -ENODEV;
+
+ wl3501_block_interrupt(this);
+
+ if (wl3501_init_firmware(this)) {
+ printk(KERN_WARNING "%s: Can't initialize Firmware!\n",
+ dev->name);
+ /* Free IRQ, and mark IRQ as unused */
+ free_irq(dev->irq, dev);
+ goto out;
+ }
+
+ /*
+ * Queue has to be started only when the Card is Started
+ */
+ netif_stop_queue(dev);
+ this->adhoc_times = 0;
+ wl3501_ack_interrupt(this);
+ wl3501_unblock_interrupt(this);
+ wl3501_mgmt_scan(this, 100);
+ dprintk(1, "%s: device reset", dev->name);
+ rc = 0;
+out:
+ return rc;
+}
+
+static void wl3501_tx_timeout(struct net_device *dev)
+{
+ struct wl3501_card *this = dev->priv;
+ struct net_device_stats *stats = &this->stats;
+ unsigned long flags;
+ int rc;
+
+ stats->tx_errors++;
+ spin_lock_irqsave(&this->lock, flags);
+ rc = wl3501_reset(dev);
+ spin_unlock_irqrestore(&this->lock, flags);
+ if (rc)
+ printk(KERN_ERR "%s: Error %d resetting card on Tx timeout!\n",
+ dev->name, rc);
+ else {
+ dev->trans_start = jiffies;
+ netif_wake_queue(dev);
+ }
+}
+
+/*
+ * Return : 0 - OK
+ * 1 - Could not transmit (dev_queue_xmit will queue it)
+ * and try to sent it later
+ */
+static int wl3501_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+ int enabled, rc;
+ struct wl3501_card *this = dev->priv;
+ unsigned long flags;
+
+ spin_lock_irqsave(&this->lock, flags);
+ enabled = wl3501_block_interrupt(this);
+ dev->trans_start = jiffies;
+ rc = wl3501_send_pkt(this, skb->data, skb->len);
+ if (enabled)
+ wl3501_unblock_interrupt(this);
+ if (rc) {
+ ++this->stats.tx_dropped;
+ netif_stop_queue(dev);
+ } else {
+ ++this->stats.tx_packets;
+ this->stats.tx_bytes += skb->len;
+ kfree_skb(skb);
+
+ if (this->tx_buffer_cnt < 2)
+ netif_stop_queue(dev);
+ }
+ spin_unlock_irqrestore(&this->lock, flags);
+ return rc;
+}
+
+static int wl3501_open(struct net_device *dev)
+{
+ int rc = -ENODEV;
+ struct wl3501_card *this = dev->priv;
+ unsigned long flags;
+ dev_link_t *link;
+
+ spin_lock_irqsave(&this->lock, flags);
+ /* Check if the device is in wl3501_dev_list */
+ for (link = wl3501_dev_list; link; link = link->next)
+ if (link->priv == dev)
+ break;
+ if (!DEV_OK(link))
+ goto out;
+ netif_device_attach(dev);
+ link->open++;
+
+ /* Initial WL3501 firmware */
+ dprintk(1, "%s: Initialize WL3501 firmware...", dev->name);
+ if (wl3501_init_firmware(this))
+ goto fail;
+ /* Initial device variables */
+ this->adhoc_times = 0;
+ /* Acknowledge Interrupt, for cleaning last state */
+ wl3501_ack_interrupt(this);
+
+ /* Enable interrupt from card after all */
+ wl3501_unblock_interrupt(this);
+ wl3501_mgmt_scan(this, 100);
+ rc = 0;
+ dprintk(1, "%s: WL3501 opened", dev->name);
+ printk(KERN_INFO "%s: Card Name: %s\n"
+ "%s: Firmware Date: %s\n",
+ dev->name, this->card_name,
+ dev->name, this->firmware_date);
+out:
+ spin_unlock_irqrestore(&this->lock, flags);
+ return rc;
+fail:
+ printk(KERN_WARNING "%s: Can't initialize firmware!\n", dev->name);
+ goto out;
+}
+
+struct net_device_stats *wl3501_get_stats(struct net_device *dev)
+{
+ struct wl3501_card *this = dev->priv;
+
+ return &this->stats;
+}
+
+struct iw_statistics *wl3501_get_wireless_stats(struct net_device *dev)
+{
+ struct wl3501_card *this = dev->priv;
+ struct iw_statistics *wstats = &this->wstats;
+ u32 value; /* size checked: it is u32 */
+
+ memset(wstats, 0, sizeof(*wstats));
+ wstats->status = netif_running(dev);
+ if (!wl3501_get_mib_value(this, WL3501_MIB_ATTR_WEP_ICV_ERROR_COUNT,
+ &value, sizeof(value)))
+ wstats->discard.code += value;
+ if (!wl3501_get_mib_value(this, WL3501_MIB_ATTR_WEP_UNDECRYPTABLE_COUNT,
+ &value, sizeof(value)))
+ wstats->discard.code += value;
+ if (!wl3501_get_mib_value(this, WL3501_MIB_ATTR_WEP_EXCLUDED_COUNT,
+ &value, sizeof(value)))
+ wstats->discard.code += value;
+ if (!wl3501_get_mib_value(this, WL3501_MIB_ATTR_RETRY_COUNT,
+ &value, sizeof(value)))
+ wstats->discard.retries = value;
+ if (!wl3501_get_mib_value(this, WL3501_MIB_ATTR_FAILED_COUNT,
+ &value, sizeof(value)))
+ wstats->discard.misc += value;
+ if (!wl3501_get_mib_value(this, WL3501_MIB_ATTR_RTS_FAILURE_COUNT,
+ &value, sizeof(value)))
+ wstats->discard.misc += value;
+ if (!wl3501_get_mib_value(this, WL3501_MIB_ATTR_ACK_FAILURE_COUNT,
+ &value, sizeof(value)))
+ wstats->discard.misc += value;
+ if (!wl3501_get_mib_value(this, WL3501_MIB_ATTR_FRAME_DUPLICATE_COUNT,
+ &value, sizeof(value)))
+ wstats->discard.misc += value;
+ return wstats;
+}
+
+static void wl3501_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
+{
+ strlcpy(info->driver, wl3501_dev_info, sizeof(info->driver));
+}
+
+static struct ethtool_ops ops = {
+ .get_drvinfo = wl3501_get_drvinfo
+};
+
+/**
+ * wl3501_detach - deletes a driver "instance"
+ * @link - FILL_IN
+ *
+ * This deletes a driver "instance". The device is de-registered with Card
+ * Services. If it has been released, all local data structures are freed.
+ * Otherwise, the structures will be freed when the device is released.
+ */
+static void wl3501_detach(dev_link_t *link)
+{
+ dev_link_t **linkp;
+
+ /* Locate device structure */
+ for (linkp = &wl3501_dev_list; *linkp; linkp = &(*linkp)->next)
+ if (*linkp == link)
+ break;
+ if (!*linkp)
+ goto out;
+
+ /* If the device is currently configured and active, we won't actually
+ * delete it yet. Instead, it is marked so that when the release()
+ * function is called, that will trigger a proper detach(). */
+
+ if (link->state & DEV_CONFIG) {
+#ifdef PCMCIA_DEBUG
+ printk(KERN_DEBUG "wl3501_cs: detach postponed, '%s' "
+ "still locked\n", link->dev->dev_name);
+#endif
+ goto out;
+ }
+
+ /* Break the link with Card Services */
+ if (link->handle)
+ pcmcia_deregister_client(link->handle);
+
+ /* Unlink device structure, free pieces */
+ *linkp = link->next;
+
+ if (link->priv)
+ free_netdev(link->priv);
+ kfree(link);
+out:
+ return;
+}
+
+static int wl3501_get_name(struct net_device *dev, struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ strlcpy(wrqu->name, "IEEE 802.11-DS", sizeof(wrqu->name));
+ return 0;
+}
+
+static int wl3501_set_freq(struct net_device *dev, struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ struct wl3501_card *this = dev->priv;
+ int channel = wrqu->freq.m;
+ int rc = -EINVAL;
+
+ if (iw_valid_channel(this->reg_domain, channel)) {
+ this->chan = channel;
+ rc = wl3501_reset(dev);
+ }
+ return rc;
+}
+
+static int wl3501_get_freq(struct net_device *dev, struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ struct wl3501_card *this = dev->priv;
+
+ wrqu->freq.m = wl3501_chan2freq[this->chan - 1] * 100000;
+ wrqu->freq.e = 1;
+ return 0;
+}
+
+static int wl3501_set_mode(struct net_device *dev, struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ int rc = -EINVAL;
+
+ if (wrqu->mode == IW_MODE_INFRA ||
+ wrqu->mode == IW_MODE_ADHOC ||
+ wrqu->mode == IW_MODE_AUTO) {
+ struct wl3501_card *this = dev->priv;
+
+ this->net_type = wrqu->mode;
+ rc = wl3501_reset(dev);
+ }
+ return rc;
+}
+
+static int wl3501_get_mode(struct net_device *dev, struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ struct wl3501_card *this = dev->priv;
+
+ wrqu->mode = this->net_type;
+ return 0;
+}
+
+static int wl3501_get_sens(struct net_device *dev, struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ struct wl3501_card *this = dev->priv;
+
+ wrqu->sens.value = this->rssi;
+ wrqu->sens.disabled = !wrqu->sens.value;
+ wrqu->sens.fixed = 1;
+ return 0;
+}
+
+static int wl3501_get_range(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ struct iw_range *range = (struct iw_range *)extra;
+
+ /* Set the length (very important for backward compatibility) */
+ wrqu->data.length = sizeof(*range);
+
+ /* Set all the info we don't care or don't know about to zero */
+ memset(range, 0, sizeof(*range));
+
+ /* Set the Wireless Extension versions */
+ range->we_version_compiled = WIRELESS_EXT;
+ range->we_version_source = 1;
+ range->throughput = 2 * 1000 * 1000; /* ~2 Mb/s */
+ /* FIXME: study the code to fill in more fields... */
+ return 0;
+}
+
+static int wl3501_set_wap(struct net_device *dev, struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ struct wl3501_card *this = dev->priv;
+ static const u8 bcast[ETH_ALEN] = { 255, 255, 255, 255, 255, 255 };
+ int rc = -EINVAL;
+
+ /* FIXME: we support other ARPHRDs...*/
+ if (wrqu->ap_addr.sa_family != ARPHRD_ETHER)
+ goto out;
+ if (!memcmp(bcast, wrqu->ap_addr.sa_data, ETH_ALEN)) {
+ /* FIXME: rescan? */
+ } else
+ memcpy(this->bssid, wrqu->ap_addr.sa_data, ETH_ALEN);
+ /* FIXME: rescan? deassoc & scan? */
+ rc = 0;
+out:
+ return rc;
+}
+
+static int wl3501_get_wap(struct net_device *dev, struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ struct wl3501_card *this = dev->priv;
+
+ wrqu->ap_addr.sa_family = ARPHRD_ETHER;
+ memcpy(wrqu->ap_addr.sa_data, this->bssid, ETH_ALEN);
+ return 0;
+}
+
+static int wl3501_set_scan(struct net_device *dev, struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ /*
+ * FIXME: trigger scanning with a reset, yes, I'm lazy
+ */
+ return wl3501_reset(dev);
+}
+
+static int wl3501_get_scan(struct net_device *dev, struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ struct wl3501_card *this = dev->priv;
+ int i;
+ char *current_ev = extra;
+ struct iw_event iwe;
+
+ for (i = 0; i < this->bss_cnt; ++i) {
+ iwe.cmd = SIOCGIWAP;
+ iwe.u.ap_addr.sa_family = ARPHRD_ETHER;
+ memcpy(iwe.u.ap_addr.sa_data, this->bss_set[i].bssid, ETH_ALEN);
+ current_ev = iwe_stream_add_event(current_ev,
+ extra + IW_SCAN_MAX_DATA,
+ &iwe, IW_EV_ADDR_LEN);
+ iwe.cmd = SIOCGIWESSID;
+ iwe.u.data.flags = 1;
+ iwe.u.data.length = this->bss_set[i].ssid.el.len;
+ current_ev = iwe_stream_add_point(current_ev,
+ extra + IW_SCAN_MAX_DATA,
+ &iwe,
+ this->bss_set[i].ssid.essid);
+ iwe.cmd = SIOCGIWMODE;
+ iwe.u.mode = this->bss_set[i].bss_type;
+ current_ev = iwe_stream_add_event(current_ev,
+ extra + IW_SCAN_MAX_DATA,
+ &iwe, IW_EV_UINT_LEN);
+ iwe.cmd = SIOCGIWFREQ;
+ iwe.u.freq.m = this->bss_set[i].ds_pset.chan;
+ iwe.u.freq.e = 0;
+ current_ev = iwe_stream_add_event(current_ev,
+ extra + IW_SCAN_MAX_DATA,
+ &iwe, IW_EV_FREQ_LEN);
+ iwe.cmd = SIOCGIWENCODE;
+ if (this->bss_set[i].cap_info & WL3501_MGMT_CAPABILITY_PRIVACY)
+ iwe.u.data.flags = IW_ENCODE_ENABLED | IW_ENCODE_NOKEY;
+ else
+ iwe.u.data.flags = IW_ENCODE_DISABLED;
+ iwe.u.data.length = 0;
+ current_ev = iwe_stream_add_point(current_ev,
+ extra + IW_SCAN_MAX_DATA,
+ &iwe, NULL);
+ }
+ /* Length of data */
+ wrqu->data.length = (current_ev - extra);
+ wrqu->data.flags = 0; /* FIXME: set properly these flags */
+ return 0;
+}
+
+static int wl3501_set_essid(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ struct wl3501_card *this = dev->priv;
+
+ if (wrqu->data.flags) {
+ iw_set_mgmt_info_element(IW_MGMT_INFO_ELEMENT_SSID,
+ &this->essid.el,
+ extra, wrqu->data.length);
+ } else { /* We accept any ESSID */
+ iw_set_mgmt_info_element(IW_MGMT_INFO_ELEMENT_SSID,
+ &this->essid.el, "ANY", 3);
+ }
+ return wl3501_reset(dev);
+}
+
+static int wl3501_get_essid(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ struct wl3501_card *this = dev->priv;
+ unsigned long flags;
+
+ spin_lock_irqsave(&this->lock, flags);
+ wrqu->essid.flags = 1;
+ wrqu->essid.length = this->essid.el.len;
+ memcpy(extra, this->essid.essid, this->essid.el.len);
+ spin_unlock_irqrestore(&this->lock, flags);
+ return 0;
+}
+
+static int wl3501_set_nick(struct net_device *dev, struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ struct wl3501_card *this = dev->priv;
+
+ if (wrqu->data.length > sizeof(this->nick))
+ return -E2BIG;
+ strlcpy(this->nick, extra, wrqu->data.length);
+ return 0;
+}
+
+static int wl3501_get_nick(struct net_device *dev, struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ struct wl3501_card *this = dev->priv;
+
+ strlcpy(extra, this->nick, 32);
+ wrqu->data.length = strlen(extra);
+ return 0;
+}
+
+static int wl3501_get_rate(struct net_device *dev, struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ /*
+ * FIXME: have to see from where to get this info, perhaps this card
+ * works at 1 Mbit/s too... for now leave at 2 Mbit/s that is the most
+ * common with the Planet Access Points. -acme
+ */
+ wrqu->bitrate.value = 2000000;
+ wrqu->bitrate.fixed = 1;
+ return 0;
+}
+
+static int wl3501_get_rts_threshold(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ u16 threshold; /* size checked: it is u16 */
+ struct wl3501_card *this = dev->priv;
+ int rc = wl3501_get_mib_value(this, WL3501_MIB_ATTR_RTS_THRESHOLD,
+ &threshold, sizeof(threshold));
+ if (!rc) {
+ wrqu->rts.value = threshold;
+ wrqu->rts.disabled = threshold >= 2347;
+ wrqu->rts.fixed = 1;
+ }
+ return rc;
+}
+
+static int wl3501_get_frag_threshold(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ u16 threshold; /* size checked: it is u16 */
+ struct wl3501_card *this = dev->priv;
+ int rc = wl3501_get_mib_value(this, WL3501_MIB_ATTR_FRAG_THRESHOLD,
+ &threshold, sizeof(threshold));
+ if (!rc) {
+ wrqu->frag.value = threshold;
+ wrqu->frag.disabled = threshold >= 2346;
+ wrqu->frag.fixed = 1;
+ }
+ return rc;
+}
+
+static int wl3501_get_txpow(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ u16 txpow;
+ struct wl3501_card *this = dev->priv;
+ int rc = wl3501_get_mib_value(this,
+ WL3501_MIB_ATTR_CURRENT_TX_PWR_LEVEL,
+ &txpow, sizeof(txpow));
+ if (!rc) {
+ wrqu->txpower.value = txpow;
+ wrqu->txpower.disabled = 0;
+ /*
+ * From the MIB values I think this can be configurable,
+ * as it lists several tx power levels -acme
+ */
+ wrqu->txpower.fixed = 0;
+ wrqu->txpower.flags = IW_TXPOW_MWATT;
+ }
+ return rc;
+}
+
+static int wl3501_get_retry(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ u8 retry; /* size checked: it is u8 */
+ struct wl3501_card *this = dev->priv;
+ int rc = wl3501_get_mib_value(this,
+ WL3501_MIB_ATTR_LONG_RETRY_LIMIT,
+ &retry, sizeof(retry));
+ if (rc)
+ goto out;
+ if (wrqu->retry.flags & IW_RETRY_MAX) {
+ wrqu->retry.flags = IW_RETRY_LIMIT | IW_RETRY_MAX;
+ goto set_value;
+ }
+ rc = wl3501_get_mib_value(this, WL3501_MIB_ATTR_SHORT_RETRY_LIMIT,
+ &retry, sizeof(retry));
+ if (rc)
+ goto out;
+ wrqu->retry.flags = IW_RETRY_LIMIT | IW_RETRY_MIN;
+set_value:
+ wrqu->retry.value = retry;
+ wrqu->retry.disabled = 0;
+out:
+ return rc;
+}
+
+static int wl3501_get_encode(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ u8 implemented, restricted, keys[100], len_keys, tocopy;
+ struct wl3501_card *this = dev->priv;
+ int rc = wl3501_get_mib_value(this,
+ WL3501_MIB_ATTR_PRIV_OPT_IMPLEMENTED,
+ &implemented, sizeof(implemented));
+ if (rc)
+ goto out;
+ if (!implemented) {
+ wrqu->encoding.flags = IW_ENCODE_DISABLED;
+ goto out;
+ }
+ rc = wl3501_get_mib_value(this, WL3501_MIB_ATTR_EXCLUDE_UNENCRYPTED,
+ &restricted, sizeof(restricted));
+ if (rc)
+ goto out;
+ wrqu->encoding.flags = restricted ? IW_ENCODE_RESTRICTED :
+ IW_ENCODE_OPEN;
+ rc = wl3501_get_mib_value(this, WL3501_MIB_ATTR_WEP_KEY_MAPPINGS_LEN,
+ &len_keys, sizeof(len_keys));
+ if (rc)
+ goto out;
+ rc = wl3501_get_mib_value(this, WL3501_MIB_ATTR_WEP_KEY_MAPPINGS,
+ keys, len_keys);
+ if (rc)
+ goto out;
+ tocopy = min_t(u8, len_keys, wrqu->encoding.length);
+ tocopy = min_t(u8, tocopy, 100);
+ wrqu->encoding.length = tocopy;
+ memset(extra, 0, tocopy);
+ memcpy(extra, keys, tocopy);
+out:
+ return rc;
+}
+
+static int wl3501_get_power(struct net_device *dev,
+ struct iw_request_info *info,
+ union iwreq_data *wrqu, char *extra)
+{
+ u8 pwr_state;
+ struct wl3501_card *this = dev->priv;
+ int rc = wl3501_get_mib_value(this,
+ WL3501_MIB_ATTR_CURRENT_PWR_STATE,
+ &pwr_state, sizeof(pwr_state));
+ if (rc)
+ goto out;
+ wrqu->power.disabled = !pwr_state;
+ wrqu->power.flags = IW_POWER_ON;
+out:
+ return rc;
+}
+
+static const iw_handler wl3501_handler[] = {
+ [SIOCGIWNAME - SIOCIWFIRST] = wl3501_get_name,
+ [SIOCSIWFREQ - SIOCIWFIRST] = wl3501_set_freq,
+ [SIOCGIWFREQ - SIOCIWFIRST] = wl3501_get_freq,
+ [SIOCSIWMODE - SIOCIWFIRST] = wl3501_set_mode,
+ [SIOCGIWMODE - SIOCIWFIRST] = wl3501_get_mode,
+ [SIOCGIWSENS - SIOCIWFIRST] = wl3501_get_sens,
+ [SIOCGIWRANGE - SIOCIWFIRST] = wl3501_get_range,
+ [SIOCSIWSPY - SIOCIWFIRST] = iw_handler_set_spy,
+ [SIOCGIWSPY - SIOCIWFIRST] = iw_handler_get_spy,
+ [SIOCSIWTHRSPY - SIOCIWFIRST] = iw_handler_set_thrspy,
+ [SIOCGIWTHRSPY - SIOCIWFIRST] = iw_handler_get_thrspy,
+ [SIOCSIWAP - SIOCIWFIRST] = wl3501_set_wap,
+ [SIOCGIWAP - SIOCIWFIRST] = wl3501_get_wap,
+ [SIOCSIWSCAN - SIOCIWFIRST] = wl3501_set_scan,
+ [SIOCGIWSCAN - SIOCIWFIRST] = wl3501_get_scan,
+ [SIOCSIWESSID - SIOCIWFIRST] = wl3501_set_essid,
+ [SIOCGIWESSID - SIOCIWFIRST] = wl3501_get_essid,
+ [SIOCSIWNICKN - SIOCIWFIRST] = wl3501_set_nick,
+ [SIOCGIWNICKN - SIOCIWFIRST] = wl3501_get_nick,
+ [SIOCGIWRATE - SIOCIWFIRST] = wl3501_get_rate,
+ [SIOCGIWRTS - SIOCIWFIRST] = wl3501_get_rts_threshold,
+ [SIOCGIWFRAG - SIOCIWFIRST] = wl3501_get_frag_threshold,
+ [SIOCGIWTXPOW - SIOCIWFIRST] = wl3501_get_txpow,
+ [SIOCGIWRETRY - SIOCIWFIRST] = wl3501_get_retry,
+ [SIOCGIWENCODE - SIOCIWFIRST] = wl3501_get_encode,
+ [SIOCGIWPOWER - SIOCIWFIRST] = wl3501_get_power,
+};
+
+static const struct iw_handler_def wl3501_handler_def = {
+ .num_standard = sizeof(wl3501_handler) / sizeof(iw_handler),
+ .standard = (iw_handler *)wl3501_handler,
+ .spy_offset = offsetof(struct wl3501_card, spy_data),
+};
+
+/**
+ * wl3501_attach - creates an "instance" of the driver
+ *
+ * Creates an "instance" of the driver, allocating local data structures for
+ * one device. The device is registered with Card Services.
+ *
+ * The dev_link structure is initialized, but we don't actually configure the
+ * card at this point -- we wait until we receive a card insertion event.
+ */
+static dev_link_t *wl3501_attach(void)
+{
+ client_reg_t client_reg;
+ dev_link_t *link;
+ struct net_device *dev;
+ int ret;
+
+ /* Initialize the dev_link_t structure */
+ link = kmalloc(sizeof(*link), GFP_KERNEL);
+ if (!link)
+ goto out;
+ memset(link, 0, sizeof(struct dev_link_t));
+
+ /* The io structure describes IO port mapping */
+ link->io.NumPorts1 = 16;
+ link->io.Attributes1 = IO_DATA_PATH_WIDTH_8;
+ link->io.IOAddrLines = 5;
+
+ /* Interrupt setup */
+ link->irq.Attributes = IRQ_TYPE_EXCLUSIVE | IRQ_HANDLE_PRESENT;
+ link->irq.IRQInfo1 = IRQ_LEVEL_ID;
+ link->irq.Handler = wl3501_interrupt;
+
+ /* General socket configuration */
+ link->conf.Attributes = CONF_ENABLE_IRQ;
+ link->conf.Vcc = 50;
+ link->conf.IntType = INT_MEMORY_AND_IO;
+ link->conf.ConfigIndex = 1;
+ link->conf.Present = PRESENT_OPTION;
+
+ dev = alloc_etherdev(sizeof(struct wl3501_card));
+ if (!dev)
+ goto out_link;
+ dev->open = wl3501_open;
+ dev->stop = wl3501_close;
+ dev->hard_start_xmit = wl3501_hard_start_xmit;
+ dev->tx_timeout = wl3501_tx_timeout;
+ dev->watchdog_timeo = 5 * HZ;
+ dev->get_stats = wl3501_get_stats;
+ dev->get_wireless_stats = wl3501_get_wireless_stats;
+ dev->wireless_handlers = (struct iw_handler_def *)&wl3501_handler_def;
+ SET_ETHTOOL_OPS(dev, &ops);
+ netif_stop_queue(dev);
+ link->priv = link->irq.Instance = dev;
+
+ /* Register with Card Services */
+ link->next = wl3501_dev_list;
+ wl3501_dev_list = link;
+ client_reg.dev_info = &wl3501_dev_info;
+ client_reg.EventMask = CS_EVENT_CARD_INSERTION |
+ CS_EVENT_RESET_PHYSICAL |
+ CS_EVENT_CARD_RESET |
+ CS_EVENT_CARD_REMOVAL |
+ CS_EVENT_PM_SUSPEND |
+ CS_EVENT_PM_RESUME;
+ client_reg.event_handler = wl3501_event;
+ client_reg.Version = 0x0210;
+ client_reg.event_callback_args.client_data = link;
+ ret = pcmcia_register_client(&link->handle, &client_reg);
+ if (ret) {
+ cs_error(link->handle, RegisterClient, ret);
+ wl3501_detach(link);
+ link = NULL;
+ }
+out:
+ return link;
+out_link:
+ kfree(link);
+ link = NULL;
+ goto out;
+}
+
+#define CS_CHECK(fn, ret) \
+do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0)
+
+/**
+ * wl3501_config - configure the PCMCIA socket and make eth device available
+ * @link - FILL_IN
+ *
+ * wl3501_config() is scheduled to run after a CARD_INSERTION event is
+ * received, to configure the PCMCIA socket, and to make the ethernet device
+ * available to the system.
+ */
+static void wl3501_config(dev_link_t *link)
+{
+ tuple_t tuple;
+ cisparse_t parse;
+ client_handle_t handle = link->handle;
+ struct net_device *dev = link->priv;
+ int i = 0, j, last_fn, last_ret;
+ unsigned char bf[64];
+ struct wl3501_card *this;
+
+ /* This reads the card's CONFIG tuple to find its config registers. */
+ tuple.Attributes = 0;
+ tuple.DesiredTuple = CISTPL_CONFIG;
+ CS_CHECK(GetFirstTuple, pcmcia_get_first_tuple(handle, &tuple));
+ tuple.TupleData = bf;
+ tuple.TupleDataMax = sizeof(bf);
+ tuple.TupleOffset = 0;
+ CS_CHECK(GetTupleData, pcmcia_get_tuple_data(handle, &tuple));
+ CS_CHECK(ParseTuple, pcmcia_parse_tuple(handle, &tuple, &parse));
+ link->conf.ConfigBase = parse.config.base;
+ link->conf.Present = parse.config.rmask[0];
+
+ /* Configure card */
+ link->state |= DEV_CONFIG;
+
+ /* Try allocating IO ports. This tries a few fixed addresses. If you
+ * want, you can also read the card's config table to pick addresses --
+ * see the serial driver for an example. */
+
+ for (j = 0x280; j < 0x400; j += 0x20) {
+ /* The '^0x300' is so that we probe 0x300-0x3ff first, then
+ * 0x200-0x2ff, and so on, because this seems safer */
+ link->io.BasePort1 = j;
+ link->io.BasePort2 = link->io.BasePort1 + 0x10;
+ i = pcmcia_request_io(link->handle, &link->io);
+ if (i == CS_SUCCESS)
+ break;
+ }
+ if (i != CS_SUCCESS) {
+ cs_error(link->handle, RequestIO, i);
+ goto failed;
+ }
+
+ /* Now allocate an interrupt line. Note that this does not actually
+ * assign a handler to the interrupt. */
+
+ CS_CHECK(RequestIRQ, pcmcia_request_irq(link->handle, &link->irq));
+
+ /* This actually configures the PCMCIA socket -- setting up the I/O
+ * windows and the interrupt mapping. */
+
+ CS_CHECK(RequestConfiguration, pcmcia_request_configuration(link->handle, &link->conf));
+
+ dev->irq = link->irq.AssignedIRQ;
+ dev->base_addr = link->io.BasePort1;
+ SET_NETDEV_DEV(dev, &handle_to_dev(handle));
+ if (register_netdev(dev)) {
+ printk(KERN_NOTICE "wl3501_cs: register_netdev() failed\n");
+ goto failed;
+ }
+
+ SET_MODULE_OWNER(dev);
+
+ this = dev->priv;
+ /*
+ * At this point, the dev_node_t structure(s) should be initialized and
+ * arranged in a linked list at link->dev.
+ */
+ link->dev = &this->node;
+ link->state &= ~DEV_CONFIG_PENDING;
+
+ this->base_addr = dev->base_addr;
+
+ if (!wl3501_get_flash_mac_addr(this)) {
+ printk(KERN_WARNING "%s: Cant read MAC addr in flash ROM?\n",
+ dev->name);
+ goto failed;
+ }
+ strcpy(this->node.dev_name, dev->name);
+
+ /* print probe information */
+ printk(KERN_INFO "%s: wl3501 @ 0x%3.3x, IRQ %d, MAC addr in flash ROM:",
+ dev->name, this->base_addr, (int)dev->irq);
+ for (i = 0; i < 6; i++) {
+ dev->dev_addr[i] = ((char *)&this->mac_addr)[i];
+ printk("%c%02x", i ? ':' : ' ', dev->dev_addr[i]);
+ }
+ printk("\n");
+ /*
+ * Initialize card parameters - added by jss
+ */
+ this->net_type = IW_MODE_INFRA;
+ this->bss_cnt = 0;
+ this->join_sta_bss = 0;
+ this->adhoc_times = 0;
+ iw_set_mgmt_info_element(IW_MGMT_INFO_ELEMENT_SSID, &this->essid.el,
+ "ANY", 3);
+ this->card_name[0] = '\0';
+ this->firmware_date[0] = '\0';
+ this->rssi = 255;
+ this->chan = iw_default_channel(this->reg_domain);
+ strlcpy(this->nick, "Planet WL3501", sizeof(this->nick));
+ spin_lock_init(&this->lock);
+ init_waitqueue_head(&this->wait);
+ netif_start_queue(dev);
+ goto out;
+cs_failed:
+ cs_error(link->handle, last_fn, last_ret);
+failed:
+ wl3501_release(link);
+out:
+ return;
+}
+
+/**
+ * wl3501_release - unregister the net, release PCMCIA configuration
+ * @arg - link
+ *
+ * After a card is removed, wl3501_release() will unregister the net device,
+ * and release the PCMCIA configuration. If the device is still open, this
+ * will be postponed until it is closed.
+ */
+static void wl3501_release(dev_link_t *link)
+{
+ struct net_device *dev = link->priv;
+
+ /* Unlink the device chain */
+ if (link->dev) {
+ unregister_netdev(dev);
+ link->dev = NULL;
+ }
+
+ /* Don't bother checking to see if these succeed or not */
+ pcmcia_release_configuration(link->handle);
+ pcmcia_release_io(link->handle, &link->io);
+ pcmcia_release_irq(link->handle, &link->irq);
+ link->state &= ~DEV_CONFIG;
+}
+
+/**
+ * wl3501_event - The card status event handler
+ * @event - event
+ * @pri - priority
+ * @args - arguments for this event
+ *
+ * The card status event handler. Mostly, this schedules other stuff to run
+ * after an event is received. A CARD_REMOVAL event also sets some flags to
+ * discourage the net drivers from trying to talk to the card any more.
+ *
+ * When a CARD_REMOVAL event is received, we immediately set a flag to block
+ * future accesses to this device. All the functions that actually access the
+ * device should check this flag to make sure the card is still present.
+ */
+static int wl3501_event(event_t event, int pri, event_callback_args_t *args)
+{
+ dev_link_t *link = args->client_data;
+ struct net_device *dev = link->priv;
+
+ switch (event) {
+ case CS_EVENT_CARD_REMOVAL:
+ link->state &= ~DEV_PRESENT;
+ if (link->state & DEV_CONFIG) {
+ while (link->open > 0)
+ wl3501_close(dev);
+ netif_device_detach(dev);
+ wl3501_release(link);
+ }
+ break;
+ case CS_EVENT_CARD_INSERTION:
+ link->state |= DEV_PRESENT | DEV_CONFIG_PENDING;
+ wl3501_config(link);
+ break;
+ case CS_EVENT_PM_SUSPEND:
+ link->state |= DEV_SUSPEND;
+ wl3501_pwr_mgmt(dev->priv, WL3501_SUSPEND);
+ /* Fall through... */
+ case CS_EVENT_RESET_PHYSICAL:
+ if (link->state & DEV_CONFIG) {
+ if (link->open)
+ netif_device_detach(dev);
+ pcmcia_release_configuration(link->handle);
+ }
+ break;
+ case CS_EVENT_PM_RESUME:
+ link->state &= ~DEV_SUSPEND;
+ wl3501_pwr_mgmt(dev->priv, WL3501_RESUME);
+ /* Fall through... */
+ case CS_EVENT_CARD_RESET:
+ if (link->state & DEV_CONFIG) {
+ pcmcia_request_configuration(link->handle, &link->conf);
+ if (link->open) {
+ wl3501_reset(dev);
+ netif_device_attach(dev);
+ }
+ }
+ break;
+ }
+ return 0;
+}
+
+static struct pcmcia_driver wl3501_driver = {
+ .owner = THIS_MODULE,
+ .drv = {
+ .name = "wl3501_cs",
+ },
+ .attach = wl3501_attach,
+ .detach = wl3501_detach,
+};
+
+static int __init wl3501_init_module(void)
+{
+ return pcmcia_register_driver(&wl3501_driver);
+}
+
+static void __exit wl3501_exit_module(void)
+{
+ dprintk(0, ": unloading");
+ pcmcia_unregister_driver(&wl3501_driver);
+ BUG_ON(wl3501_dev_list != NULL);
+}
+
+module_init(wl3501_init_module);
+module_exit(wl3501_exit_module);
+
+MODULE_AUTHOR("Fox Chen <mhchen@golf.ccl.itri.org.tw>, "
+ "Arnaldo Carvalho de Melo <acme@conectiva.com.br>,"
+ "Gustavo Niemeyer <niemeyer@conectiva.com>");
+MODULE_DESCRIPTION("Planet wl3501 wireless driver");
+MODULE_LICENSE("GPL");