Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/drivers/pci/hotplug/ibmphp_hpc.c b/drivers/pci/hotplug/ibmphp_hpc.c
new file mode 100644
index 0000000..6894b54
--- /dev/null
+++ b/drivers/pci/hotplug/ibmphp_hpc.c
@@ -0,0 +1,1161 @@
+/*
+ * IBM Hot Plug Controller Driver
+ *
+ * Written By: Jyoti Shah, IBM Corporation
+ *
+ * Copyright (C) 2001-2003 IBM Corp.
+ *
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Send feedback to <gregkh@us.ibm.com>
+ * <jshah@us.ibm.com>
+ *
+ */
+
+#include <linux/wait.h>
+#include <linux/time.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/smp_lock.h>
+#include <linux/init.h>
+#include "ibmphp.h"
+
+static int to_debug = FALSE;
+#define debug_polling(fmt, arg...) do { if (to_debug) debug (fmt, arg); } while (0)
+
+//----------------------------------------------------------------------------
+// timeout values
+//----------------------------------------------------------------------------
+#define CMD_COMPLETE_TOUT_SEC 60 // give HPC 60 sec to finish cmd
+#define HPC_CTLR_WORKING_TOUT 60 // give HPC 60 sec to finish cmd
+#define HPC_GETACCESS_TIMEOUT 60 // seconds
+#define POLL_INTERVAL_SEC 2 // poll HPC every 2 seconds
+#define POLL_LATCH_CNT 5 // poll latch 5 times, then poll slots
+
+//----------------------------------------------------------------------------
+// Winnipeg Architected Register Offsets
+//----------------------------------------------------------------------------
+#define WPG_I2CMBUFL_OFFSET 0x08 // I2C Message Buffer Low
+#define WPG_I2CMOSUP_OFFSET 0x10 // I2C Master Operation Setup Reg
+#define WPG_I2CMCNTL_OFFSET 0x20 // I2C Master Control Register
+#define WPG_I2CPARM_OFFSET 0x40 // I2C Parameter Register
+#define WPG_I2CSTAT_OFFSET 0x70 // I2C Status Register
+
+//----------------------------------------------------------------------------
+// Winnipeg Store Type commands (Add this commands to the register offset)
+//----------------------------------------------------------------------------
+#define WPG_I2C_AND 0x1000 // I2C AND operation
+#define WPG_I2C_OR 0x2000 // I2C OR operation
+
+//----------------------------------------------------------------------------
+// Command set for I2C Master Operation Setup Regisetr
+//----------------------------------------------------------------------------
+#define WPG_READATADDR_MASK 0x00010000 // read,bytes,I2C shifted,index
+#define WPG_WRITEATADDR_MASK 0x40010000 // write,bytes,I2C shifted,index
+#define WPG_READDIRECT_MASK 0x10010000
+#define WPG_WRITEDIRECT_MASK 0x60010000
+
+
+//----------------------------------------------------------------------------
+// bit masks for I2C Master Control Register
+//----------------------------------------------------------------------------
+#define WPG_I2CMCNTL_STARTOP_MASK 0x00000002 // Start the Operation
+
+//----------------------------------------------------------------------------
+//
+//----------------------------------------------------------------------------
+#define WPG_I2C_IOREMAP_SIZE 0x2044 // size of linear address interval
+
+//----------------------------------------------------------------------------
+// command index
+//----------------------------------------------------------------------------
+#define WPG_1ST_SLOT_INDEX 0x01 // index - 1st slot for ctlr
+#define WPG_CTLR_INDEX 0x0F // index - ctlr
+#define WPG_1ST_EXTSLOT_INDEX 0x10 // index - 1st ext slot for ctlr
+#define WPG_1ST_BUS_INDEX 0x1F // index - 1st bus for ctlr
+
+//----------------------------------------------------------------------------
+// macro utilities
+//----------------------------------------------------------------------------
+// if bits 20,22,25,26,27,29,30 are OFF return TRUE
+#define HPC_I2CSTATUS_CHECK(s) ((u8)((s & 0x00000A76) ? FALSE : TRUE))
+
+//----------------------------------------------------------------------------
+// global variables
+//----------------------------------------------------------------------------
+static int ibmphp_shutdown;
+static int tid_poll;
+static struct semaphore sem_hpcaccess; // lock access to HPC
+static struct semaphore semOperations; // lock all operations and
+ // access to data structures
+static struct semaphore sem_exit; // make sure polling thread goes away
+//----------------------------------------------------------------------------
+// local function prototypes
+//----------------------------------------------------------------------------
+static u8 i2c_ctrl_read (struct controller *, void __iomem *, u8);
+static u8 i2c_ctrl_write (struct controller *, void __iomem *, u8, u8);
+static u8 hpc_writecmdtoindex (u8, u8);
+static u8 hpc_readcmdtoindex (u8, u8);
+static void get_hpc_access (void);
+static void free_hpc_access (void);
+static void poll_hpc (void);
+static int process_changeinstatus (struct slot *, struct slot *);
+static int process_changeinlatch (u8, u8, struct controller *);
+static int hpc_poll_thread (void *);
+static int hpc_wait_ctlr_notworking (int, struct controller *, void __iomem *, u8 *);
+//----------------------------------------------------------------------------
+
+
+/*----------------------------------------------------------------------
+* Name: ibmphp_hpc_initvars
+*
+* Action: initialize semaphores and variables
+*---------------------------------------------------------------------*/
+void __init ibmphp_hpc_initvars (void)
+{
+ debug ("%s - Entry\n", __FUNCTION__);
+
+ init_MUTEX (&sem_hpcaccess);
+ init_MUTEX (&semOperations);
+ init_MUTEX_LOCKED (&sem_exit);
+ to_debug = FALSE;
+ ibmphp_shutdown = FALSE;
+ tid_poll = 0;
+
+ debug ("%s - Exit\n", __FUNCTION__);
+}
+
+/*----------------------------------------------------------------------
+* Name: i2c_ctrl_read
+*
+* Action: read from HPC over I2C
+*
+*---------------------------------------------------------------------*/
+static u8 i2c_ctrl_read (struct controller *ctlr_ptr, void __iomem *WPGBbar, u8 index)
+{
+ u8 status;
+ int i;
+ void __iomem *wpg_addr; // base addr + offset
+ unsigned long wpg_data; // data to/from WPG LOHI format
+ unsigned long ultemp;
+ unsigned long data; // actual data HILO format
+
+ debug_polling ("%s - Entry WPGBbar[%p] index[%x] \n", __FUNCTION__, WPGBbar, index);
+
+ //--------------------------------------------------------------------
+ // READ - step 1
+ // read at address, byte length, I2C address (shifted), index
+ // or read direct, byte length, index
+ if (ctlr_ptr->ctlr_type == 0x02) {
+ data = WPG_READATADDR_MASK;
+ // fill in I2C address
+ ultemp = (unsigned long)ctlr_ptr->u.wpeg_ctlr.i2c_addr;
+ ultemp = ultemp >> 1;
+ data |= (ultemp << 8);
+
+ // fill in index
+ data |= (unsigned long)index;
+ } else if (ctlr_ptr->ctlr_type == 0x04) {
+ data = WPG_READDIRECT_MASK;
+
+ // fill in index
+ ultemp = (unsigned long)index;
+ ultemp = ultemp << 8;
+ data |= ultemp;
+ } else {
+ err ("this controller type is not supported \n");
+ return HPC_ERROR;
+ }
+
+ wpg_data = swab32 (data); // swap data before writing
+ wpg_addr = WPGBbar + WPG_I2CMOSUP_OFFSET;
+ writel (wpg_data, wpg_addr);
+
+ //--------------------------------------------------------------------
+ // READ - step 2 : clear the message buffer
+ data = 0x00000000;
+ wpg_data = swab32 (data);
+ wpg_addr = WPGBbar + WPG_I2CMBUFL_OFFSET;
+ writel (wpg_data, wpg_addr);
+
+ //--------------------------------------------------------------------
+ // READ - step 3 : issue start operation, I2C master control bit 30:ON
+ // 2020 : [20] OR operation at [20] offset 0x20
+ data = WPG_I2CMCNTL_STARTOP_MASK;
+ wpg_data = swab32 (data);
+ wpg_addr = WPGBbar + WPG_I2CMCNTL_OFFSET + WPG_I2C_OR;
+ writel (wpg_data, wpg_addr);
+
+ //--------------------------------------------------------------------
+ // READ - step 4 : wait until start operation bit clears
+ i = CMD_COMPLETE_TOUT_SEC;
+ while (i) {
+ msleep(10);
+ wpg_addr = WPGBbar + WPG_I2CMCNTL_OFFSET;
+ wpg_data = readl (wpg_addr);
+ data = swab32 (wpg_data);
+ if (!(data & WPG_I2CMCNTL_STARTOP_MASK))
+ break;
+ i--;
+ }
+ if (i == 0) {
+ debug ("%s - Error : WPG timeout\n", __FUNCTION__);
+ return HPC_ERROR;
+ }
+ //--------------------------------------------------------------------
+ // READ - step 5 : read I2C status register
+ i = CMD_COMPLETE_TOUT_SEC;
+ while (i) {
+ msleep(10);
+ wpg_addr = WPGBbar + WPG_I2CSTAT_OFFSET;
+ wpg_data = readl (wpg_addr);
+ data = swab32 (wpg_data);
+ if (HPC_I2CSTATUS_CHECK (data))
+ break;
+ i--;
+ }
+ if (i == 0) {
+ debug ("ctrl_read - Exit Error:I2C timeout\n");
+ return HPC_ERROR;
+ }
+
+ //--------------------------------------------------------------------
+ // READ - step 6 : get DATA
+ wpg_addr = WPGBbar + WPG_I2CMBUFL_OFFSET;
+ wpg_data = readl (wpg_addr);
+ data = swab32 (wpg_data);
+
+ status = (u8) data;
+
+ debug_polling ("%s - Exit index[%x] status[%x]\n", __FUNCTION__, index, status);
+
+ return (status);
+}
+
+/*----------------------------------------------------------------------
+* Name: i2c_ctrl_write
+*
+* Action: write to HPC over I2C
+*
+* Return 0 or error codes
+*---------------------------------------------------------------------*/
+static u8 i2c_ctrl_write (struct controller *ctlr_ptr, void __iomem *WPGBbar, u8 index, u8 cmd)
+{
+ u8 rc;
+ void __iomem *wpg_addr; // base addr + offset
+ unsigned long wpg_data; // data to/from WPG LOHI format
+ unsigned long ultemp;
+ unsigned long data; // actual data HILO format
+ int i;
+
+ debug_polling ("%s - Entry WPGBbar[%p] index[%x] cmd[%x]\n", __FUNCTION__, WPGBbar, index, cmd);
+
+ rc = 0;
+ //--------------------------------------------------------------------
+ // WRITE - step 1
+ // write at address, byte length, I2C address (shifted), index
+ // or write direct, byte length, index
+ data = 0x00000000;
+
+ if (ctlr_ptr->ctlr_type == 0x02) {
+ data = WPG_WRITEATADDR_MASK;
+ // fill in I2C address
+ ultemp = (unsigned long)ctlr_ptr->u.wpeg_ctlr.i2c_addr;
+ ultemp = ultemp >> 1;
+ data |= (ultemp << 8);
+
+ // fill in index
+ data |= (unsigned long)index;
+ } else if (ctlr_ptr->ctlr_type == 0x04) {
+ data = WPG_WRITEDIRECT_MASK;
+
+ // fill in index
+ ultemp = (unsigned long)index;
+ ultemp = ultemp << 8;
+ data |= ultemp;
+ } else {
+ err ("this controller type is not supported \n");
+ return HPC_ERROR;
+ }
+
+ wpg_data = swab32 (data); // swap data before writing
+ wpg_addr = WPGBbar + WPG_I2CMOSUP_OFFSET;
+ writel (wpg_data, wpg_addr);
+
+ //--------------------------------------------------------------------
+ // WRITE - step 2 : clear the message buffer
+ data = 0x00000000 | (unsigned long)cmd;
+ wpg_data = swab32 (data);
+ wpg_addr = WPGBbar + WPG_I2CMBUFL_OFFSET;
+ writel (wpg_data, wpg_addr);
+
+ //--------------------------------------------------------------------
+ // WRITE - step 3 : issue start operation,I2C master control bit 30:ON
+ // 2020 : [20] OR operation at [20] offset 0x20
+ data = WPG_I2CMCNTL_STARTOP_MASK;
+ wpg_data = swab32 (data);
+ wpg_addr = WPGBbar + WPG_I2CMCNTL_OFFSET + WPG_I2C_OR;
+ writel (wpg_data, wpg_addr);
+
+ //--------------------------------------------------------------------
+ // WRITE - step 4 : wait until start operation bit clears
+ i = CMD_COMPLETE_TOUT_SEC;
+ while (i) {
+ msleep(10);
+ wpg_addr = WPGBbar + WPG_I2CMCNTL_OFFSET;
+ wpg_data = readl (wpg_addr);
+ data = swab32 (wpg_data);
+ if (!(data & WPG_I2CMCNTL_STARTOP_MASK))
+ break;
+ i--;
+ }
+ if (i == 0) {
+ debug ("%s - Exit Error:WPG timeout\n", __FUNCTION__);
+ rc = HPC_ERROR;
+ }
+
+ //--------------------------------------------------------------------
+ // WRITE - step 5 : read I2C status register
+ i = CMD_COMPLETE_TOUT_SEC;
+ while (i) {
+ msleep(10);
+ wpg_addr = WPGBbar + WPG_I2CSTAT_OFFSET;
+ wpg_data = readl (wpg_addr);
+ data = swab32 (wpg_data);
+ if (HPC_I2CSTATUS_CHECK (data))
+ break;
+ i--;
+ }
+ if (i == 0) {
+ debug ("ctrl_read - Error : I2C timeout\n");
+ rc = HPC_ERROR;
+ }
+
+ debug_polling ("%s Exit rc[%x]\n", __FUNCTION__, rc);
+ return (rc);
+}
+
+//------------------------------------------------------------
+// Read from ISA type HPC
+//------------------------------------------------------------
+static u8 isa_ctrl_read (struct controller *ctlr_ptr, u8 offset)
+{
+ u16 start_address;
+ u16 end_address;
+ u8 data;
+
+ start_address = ctlr_ptr->u.isa_ctlr.io_start;
+ end_address = ctlr_ptr->u.isa_ctlr.io_end;
+ data = inb (start_address + offset);
+ return data;
+}
+
+//--------------------------------------------------------------
+// Write to ISA type HPC
+//--------------------------------------------------------------
+static void isa_ctrl_write (struct controller *ctlr_ptr, u8 offset, u8 data)
+{
+ u16 start_address;
+ u16 port_address;
+
+ start_address = ctlr_ptr->u.isa_ctlr.io_start;
+ port_address = start_address + (u16) offset;
+ outb (data, port_address);
+}
+
+static u8 pci_ctrl_read (struct controller *ctrl, u8 offset)
+{
+ u8 data = 0x00;
+ debug ("inside pci_ctrl_read\n");
+ if (ctrl->ctrl_dev)
+ pci_read_config_byte (ctrl->ctrl_dev, HPC_PCI_OFFSET + offset, &data);
+ return data;
+}
+
+static u8 pci_ctrl_write (struct controller *ctrl, u8 offset, u8 data)
+{
+ u8 rc = -ENODEV;
+ debug ("inside pci_ctrl_write\n");
+ if (ctrl->ctrl_dev) {
+ pci_write_config_byte (ctrl->ctrl_dev, HPC_PCI_OFFSET + offset, data);
+ rc = 0;
+ }
+ return rc;
+}
+
+static u8 ctrl_read (struct controller *ctlr, void __iomem *base, u8 offset)
+{
+ u8 rc;
+ switch (ctlr->ctlr_type) {
+ case 0:
+ rc = isa_ctrl_read (ctlr, offset);
+ break;
+ case 1:
+ rc = pci_ctrl_read (ctlr, offset);
+ break;
+ case 2:
+ case 4:
+ rc = i2c_ctrl_read (ctlr, base, offset);
+ break;
+ default:
+ return -ENODEV;
+ }
+ return rc;
+}
+
+static u8 ctrl_write (struct controller *ctlr, void __iomem *base, u8 offset, u8 data)
+{
+ u8 rc = 0;
+ switch (ctlr->ctlr_type) {
+ case 0:
+ isa_ctrl_write(ctlr, offset, data);
+ break;
+ case 1:
+ rc = pci_ctrl_write (ctlr, offset, data);
+ break;
+ case 2:
+ case 4:
+ rc = i2c_ctrl_write(ctlr, base, offset, data);
+ break;
+ default:
+ return -ENODEV;
+ }
+ return rc;
+}
+/*----------------------------------------------------------------------
+* Name: hpc_writecmdtoindex()
+*
+* Action: convert a write command to proper index within a controller
+*
+* Return index, HPC_ERROR
+*---------------------------------------------------------------------*/
+static u8 hpc_writecmdtoindex (u8 cmd, u8 index)
+{
+ u8 rc;
+
+ switch (cmd) {
+ case HPC_CTLR_ENABLEIRQ: // 0x00.N.15
+ case HPC_CTLR_CLEARIRQ: // 0x06.N.15
+ case HPC_CTLR_RESET: // 0x07.N.15
+ case HPC_CTLR_IRQSTEER: // 0x08.N.15
+ case HPC_CTLR_DISABLEIRQ: // 0x01.N.15
+ case HPC_ALLSLOT_ON: // 0x11.N.15
+ case HPC_ALLSLOT_OFF: // 0x12.N.15
+ rc = 0x0F;
+ break;
+
+ case HPC_SLOT_OFF: // 0x02.Y.0-14
+ case HPC_SLOT_ON: // 0x03.Y.0-14
+ case HPC_SLOT_ATTNOFF: // 0x04.N.0-14
+ case HPC_SLOT_ATTNON: // 0x05.N.0-14
+ case HPC_SLOT_BLINKLED: // 0x13.N.0-14
+ rc = index;
+ break;
+
+ case HPC_BUS_33CONVMODE:
+ case HPC_BUS_66CONVMODE:
+ case HPC_BUS_66PCIXMODE:
+ case HPC_BUS_100PCIXMODE:
+ case HPC_BUS_133PCIXMODE:
+ rc = index + WPG_1ST_BUS_INDEX - 1;
+ break;
+
+ default:
+ err ("hpc_writecmdtoindex - Error invalid cmd[%x]\n", cmd);
+ rc = HPC_ERROR;
+ }
+
+ return rc;
+}
+
+/*----------------------------------------------------------------------
+* Name: hpc_readcmdtoindex()
+*
+* Action: convert a read command to proper index within a controller
+*
+* Return index, HPC_ERROR
+*---------------------------------------------------------------------*/
+static u8 hpc_readcmdtoindex (u8 cmd, u8 index)
+{
+ u8 rc;
+
+ switch (cmd) {
+ case READ_CTLRSTATUS:
+ rc = 0x0F;
+ break;
+ case READ_SLOTSTATUS:
+ case READ_ALLSTAT:
+ rc = index;
+ break;
+ case READ_EXTSLOTSTATUS:
+ rc = index + WPG_1ST_EXTSLOT_INDEX;
+ break;
+ case READ_BUSSTATUS:
+ rc = index + WPG_1ST_BUS_INDEX - 1;
+ break;
+ case READ_SLOTLATCHLOWREG:
+ rc = 0x28;
+ break;
+ case READ_REVLEVEL:
+ rc = 0x25;
+ break;
+ case READ_HPCOPTIONS:
+ rc = 0x27;
+ break;
+ default:
+ rc = HPC_ERROR;
+ }
+ return rc;
+}
+
+/*----------------------------------------------------------------------
+* Name: HPCreadslot()
+*
+* Action: issue a READ command to HPC
+*
+* Input: pslot - can not be NULL for READ_ALLSTAT
+* pstatus - can be NULL for READ_ALLSTAT
+*
+* Return 0 or error codes
+*---------------------------------------------------------------------*/
+int ibmphp_hpc_readslot (struct slot * pslot, u8 cmd, u8 * pstatus)
+{
+ void __iomem *wpg_bbar = NULL;
+ struct controller *ctlr_ptr;
+ struct list_head *pslotlist;
+ u8 index, status;
+ int rc = 0;
+ int busindex;
+
+ debug_polling ("%s - Entry pslot[%p] cmd[%x] pstatus[%p]\n", __FUNCTION__, pslot, cmd, pstatus);
+
+ if ((pslot == NULL)
+ || ((pstatus == NULL) && (cmd != READ_ALLSTAT) && (cmd != READ_BUSSTATUS))) {
+ rc = -EINVAL;
+ err ("%s - Error invalid pointer, rc[%d]\n", __FUNCTION__, rc);
+ return rc;
+ }
+
+ if (cmd == READ_BUSSTATUS) {
+ busindex = ibmphp_get_bus_index (pslot->bus);
+ if (busindex < 0) {
+ rc = -EINVAL;
+ err ("%s - Exit Error:invalid bus, rc[%d]\n", __FUNCTION__, rc);
+ return rc;
+ } else
+ index = (u8) busindex;
+ } else
+ index = pslot->ctlr_index;
+
+ index = hpc_readcmdtoindex (cmd, index);
+
+ if (index == HPC_ERROR) {
+ rc = -EINVAL;
+ err ("%s - Exit Error:invalid index, rc[%d]\n", __FUNCTION__, rc);
+ return rc;
+ }
+
+ ctlr_ptr = pslot->ctrl;
+
+ get_hpc_access ();
+
+ //--------------------------------------------------------------------
+ // map physical address to logical address
+ //--------------------------------------------------------------------
+ if ((ctlr_ptr->ctlr_type == 2) || (ctlr_ptr->ctlr_type == 4))
+ wpg_bbar = ioremap (ctlr_ptr->u.wpeg_ctlr.wpegbbar, WPG_I2C_IOREMAP_SIZE);
+
+ //--------------------------------------------------------------------
+ // check controller status before reading
+ //--------------------------------------------------------------------
+ rc = hpc_wait_ctlr_notworking (HPC_CTLR_WORKING_TOUT, ctlr_ptr, wpg_bbar, &status);
+ if (!rc) {
+ switch (cmd) {
+ case READ_ALLSTAT:
+ // update the slot structure
+ pslot->ctrl->status = status;
+ pslot->status = ctrl_read (ctlr_ptr, wpg_bbar, index);
+ rc = hpc_wait_ctlr_notworking (HPC_CTLR_WORKING_TOUT, ctlr_ptr, wpg_bbar,
+ &status);
+ if (!rc)
+ pslot->ext_status = ctrl_read (ctlr_ptr, wpg_bbar, index + WPG_1ST_EXTSLOT_INDEX);
+
+ break;
+
+ case READ_SLOTSTATUS:
+ // DO NOT update the slot structure
+ *pstatus = ctrl_read (ctlr_ptr, wpg_bbar, index);
+ break;
+
+ case READ_EXTSLOTSTATUS:
+ // DO NOT update the slot structure
+ *pstatus = ctrl_read (ctlr_ptr, wpg_bbar, index);
+ break;
+
+ case READ_CTLRSTATUS:
+ // DO NOT update the slot structure
+ *pstatus = status;
+ break;
+
+ case READ_BUSSTATUS:
+ pslot->busstatus = ctrl_read (ctlr_ptr, wpg_bbar, index);
+ break;
+ case READ_REVLEVEL:
+ *pstatus = ctrl_read (ctlr_ptr, wpg_bbar, index);
+ break;
+ case READ_HPCOPTIONS:
+ *pstatus = ctrl_read (ctlr_ptr, wpg_bbar, index);
+ break;
+ case READ_SLOTLATCHLOWREG:
+ // DO NOT update the slot structure
+ *pstatus = ctrl_read (ctlr_ptr, wpg_bbar, index);
+ break;
+
+ // Not used
+ case READ_ALLSLOT:
+ list_for_each (pslotlist, &ibmphp_slot_head) {
+ pslot = list_entry (pslotlist, struct slot, ibm_slot_list);
+ index = pslot->ctlr_index;
+ rc = hpc_wait_ctlr_notworking (HPC_CTLR_WORKING_TOUT, ctlr_ptr,
+ wpg_bbar, &status);
+ if (!rc) {
+ pslot->status = ctrl_read (ctlr_ptr, wpg_bbar, index);
+ rc = hpc_wait_ctlr_notworking (HPC_CTLR_WORKING_TOUT,
+ ctlr_ptr, wpg_bbar, &status);
+ if (!rc)
+ pslot->ext_status =
+ ctrl_read (ctlr_ptr, wpg_bbar,
+ index + WPG_1ST_EXTSLOT_INDEX);
+ } else {
+ err ("%s - Error ctrl_read failed\n", __FUNCTION__);
+ rc = -EINVAL;
+ break;
+ }
+ }
+ break;
+ default:
+ rc = -EINVAL;
+ break;
+ }
+ }
+ //--------------------------------------------------------------------
+ // cleanup
+ //--------------------------------------------------------------------
+
+ // remove physical to logical address mapping
+ if ((ctlr_ptr->ctlr_type == 2) || (ctlr_ptr->ctlr_type == 4))
+ iounmap (wpg_bbar);
+
+ free_hpc_access ();
+
+ debug_polling ("%s - Exit rc[%d]\n", __FUNCTION__, rc);
+ return rc;
+}
+
+/*----------------------------------------------------------------------
+* Name: ibmphp_hpc_writeslot()
+*
+* Action: issue a WRITE command to HPC
+*---------------------------------------------------------------------*/
+int ibmphp_hpc_writeslot (struct slot * pslot, u8 cmd)
+{
+ void __iomem *wpg_bbar = NULL;
+ struct controller *ctlr_ptr;
+ u8 index, status;
+ int busindex;
+ u8 done;
+ int rc = 0;
+ int timeout;
+
+ debug_polling ("%s - Entry pslot[%p] cmd[%x]\n", __FUNCTION__, pslot, cmd);
+ if (pslot == NULL) {
+ rc = -EINVAL;
+ err ("%s - Error Exit rc[%d]\n", __FUNCTION__, rc);
+ return rc;
+ }
+
+ if ((cmd == HPC_BUS_33CONVMODE) || (cmd == HPC_BUS_66CONVMODE) ||
+ (cmd == HPC_BUS_66PCIXMODE) || (cmd == HPC_BUS_100PCIXMODE) ||
+ (cmd == HPC_BUS_133PCIXMODE)) {
+ busindex = ibmphp_get_bus_index (pslot->bus);
+ if (busindex < 0) {
+ rc = -EINVAL;
+ err ("%s - Exit Error:invalid bus, rc[%d]\n", __FUNCTION__, rc);
+ return rc;
+ } else
+ index = (u8) busindex;
+ } else
+ index = pslot->ctlr_index;
+
+ index = hpc_writecmdtoindex (cmd, index);
+
+ if (index == HPC_ERROR) {
+ rc = -EINVAL;
+ err ("%s - Error Exit rc[%d]\n", __FUNCTION__, rc);
+ return rc;
+ }
+
+ ctlr_ptr = pslot->ctrl;
+
+ get_hpc_access ();
+
+ //--------------------------------------------------------------------
+ // map physical address to logical address
+ //--------------------------------------------------------------------
+ if ((ctlr_ptr->ctlr_type == 2) || (ctlr_ptr->ctlr_type == 4)) {
+ wpg_bbar = ioremap (ctlr_ptr->u.wpeg_ctlr.wpegbbar, WPG_I2C_IOREMAP_SIZE);
+
+ debug ("%s - ctlr id[%x] physical[%lx] logical[%lx] i2c[%x]\n", __FUNCTION__,
+ ctlr_ptr->ctlr_id, (ulong) (ctlr_ptr->u.wpeg_ctlr.wpegbbar), (ulong) wpg_bbar,
+ ctlr_ptr->u.wpeg_ctlr.i2c_addr);
+ }
+ //--------------------------------------------------------------------
+ // check controller status before writing
+ //--------------------------------------------------------------------
+ rc = hpc_wait_ctlr_notworking (HPC_CTLR_WORKING_TOUT, ctlr_ptr, wpg_bbar, &status);
+ if (!rc) {
+
+ ctrl_write (ctlr_ptr, wpg_bbar, index, cmd);
+
+ //--------------------------------------------------------------------
+ // check controller is still not working on the command
+ //--------------------------------------------------------------------
+ timeout = CMD_COMPLETE_TOUT_SEC;
+ done = FALSE;
+ while (!done) {
+ rc = hpc_wait_ctlr_notworking (HPC_CTLR_WORKING_TOUT, ctlr_ptr, wpg_bbar,
+ &status);
+ if (!rc) {
+ if (NEEDTOCHECK_CMDSTATUS (cmd)) {
+ if (CTLR_FINISHED (status) == HPC_CTLR_FINISHED_YES)
+ done = TRUE;
+ } else
+ done = TRUE;
+ }
+ if (!done) {
+ msleep(1000);
+ if (timeout < 1) {
+ done = TRUE;
+ err ("%s - Error command complete timeout\n", __FUNCTION__);
+ rc = -EFAULT;
+ } else
+ timeout--;
+ }
+ }
+ ctlr_ptr->status = status;
+ }
+ // cleanup
+
+ // remove physical to logical address mapping
+ if ((ctlr_ptr->ctlr_type == 2) || (ctlr_ptr->ctlr_type == 4))
+ iounmap (wpg_bbar);
+ free_hpc_access ();
+
+ debug_polling ("%s - Exit rc[%d]\n", __FUNCTION__, rc);
+ return rc;
+}
+
+/*----------------------------------------------------------------------
+* Name: get_hpc_access()
+*
+* Action: make sure only one process can access HPC at one time
+*---------------------------------------------------------------------*/
+static void get_hpc_access (void)
+{
+ down (&sem_hpcaccess);
+}
+
+/*----------------------------------------------------------------------
+* Name: free_hpc_access()
+*---------------------------------------------------------------------*/
+void free_hpc_access (void)
+{
+ up (&sem_hpcaccess);
+}
+
+/*----------------------------------------------------------------------
+* Name: ibmphp_lock_operations()
+*
+* Action: make sure only one process can change the data structure
+*---------------------------------------------------------------------*/
+void ibmphp_lock_operations (void)
+{
+ down (&semOperations);
+ to_debug = TRUE;
+}
+
+/*----------------------------------------------------------------------
+* Name: ibmphp_unlock_operations()
+*---------------------------------------------------------------------*/
+void ibmphp_unlock_operations (void)
+{
+ debug ("%s - Entry\n", __FUNCTION__);
+ up (&semOperations);
+ to_debug = FALSE;
+ debug ("%s - Exit\n", __FUNCTION__);
+}
+
+/*----------------------------------------------------------------------
+* Name: poll_hpc()
+*---------------------------------------------------------------------*/
+#define POLL_LATCH_REGISTER 0
+#define POLL_SLOTS 1
+#define POLL_SLEEP 2
+static void poll_hpc (void)
+{
+ struct slot myslot;
+ struct slot *pslot = NULL;
+ struct list_head *pslotlist;
+ int rc;
+ int poll_state = POLL_LATCH_REGISTER;
+ u8 oldlatchlow = 0x00;
+ u8 curlatchlow = 0x00;
+ int poll_count = 0;
+ u8 ctrl_count = 0x00;
+
+ debug ("%s - Entry\n", __FUNCTION__);
+
+ while (!ibmphp_shutdown) {
+ if (ibmphp_shutdown)
+ break;
+
+ /* try to get the lock to do some kind of harware access */
+ down (&semOperations);
+
+ switch (poll_state) {
+ case POLL_LATCH_REGISTER:
+ oldlatchlow = curlatchlow;
+ ctrl_count = 0x00;
+ list_for_each (pslotlist, &ibmphp_slot_head) {
+ if (ctrl_count >= ibmphp_get_total_controllers())
+ break;
+ pslot = list_entry (pslotlist, struct slot, ibm_slot_list);
+ if (pslot->ctrl->ctlr_relative_id == ctrl_count) {
+ ctrl_count++;
+ if (READ_SLOT_LATCH (pslot->ctrl)) {
+ rc = ibmphp_hpc_readslot (pslot,
+ READ_SLOTLATCHLOWREG,
+ &curlatchlow);
+ if (oldlatchlow != curlatchlow)
+ process_changeinlatch (oldlatchlow,
+ curlatchlow,
+ pslot->ctrl);
+ }
+ }
+ }
+ ++poll_count;
+ poll_state = POLL_SLEEP;
+ break;
+ case POLL_SLOTS:
+ list_for_each (pslotlist, &ibmphp_slot_head) {
+ pslot = list_entry (pslotlist, struct slot, ibm_slot_list);
+ // make a copy of the old status
+ memcpy ((void *) &myslot, (void *) pslot,
+ sizeof (struct slot));
+ rc = ibmphp_hpc_readslot (pslot, READ_ALLSTAT, NULL);
+ if ((myslot.status != pslot->status)
+ || (myslot.ext_status != pslot->ext_status))
+ process_changeinstatus (pslot, &myslot);
+ }
+ ctrl_count = 0x00;
+ list_for_each (pslotlist, &ibmphp_slot_head) {
+ if (ctrl_count >= ibmphp_get_total_controllers())
+ break;
+ pslot = list_entry (pslotlist, struct slot, ibm_slot_list);
+ if (pslot->ctrl->ctlr_relative_id == ctrl_count) {
+ ctrl_count++;
+ if (READ_SLOT_LATCH (pslot->ctrl))
+ rc = ibmphp_hpc_readslot (pslot,
+ READ_SLOTLATCHLOWREG,
+ &curlatchlow);
+ }
+ }
+ ++poll_count;
+ poll_state = POLL_SLEEP;
+ break;
+ case POLL_SLEEP:
+ /* don't sleep with a lock on the hardware */
+ up (&semOperations);
+ msleep(POLL_INTERVAL_SEC * 1000);
+
+ if (ibmphp_shutdown)
+ break;
+
+ down (&semOperations);
+
+ if (poll_count >= POLL_LATCH_CNT) {
+ poll_count = 0;
+ poll_state = POLL_SLOTS;
+ } else
+ poll_state = POLL_LATCH_REGISTER;
+ break;
+ }
+ /* give up the harware semaphore */
+ up (&semOperations);
+ /* sleep for a short time just for good measure */
+ msleep(100);
+ }
+ up (&sem_exit);
+ debug ("%s - Exit\n", __FUNCTION__);
+}
+
+
+/*----------------------------------------------------------------------
+* Name: process_changeinstatus
+*
+* Action: compare old and new slot status, process the change in status
+*
+* Input: pointer to slot struct, old slot struct
+*
+* Return 0 or error codes
+* Value:
+*
+* Side
+* Effects: None.
+*
+* Notes:
+*---------------------------------------------------------------------*/
+static int process_changeinstatus (struct slot *pslot, struct slot *poldslot)
+{
+ u8 status;
+ int rc = 0;
+ u8 disable = FALSE;
+ u8 update = FALSE;
+
+ debug ("process_changeinstatus - Entry pslot[%p], poldslot[%p]\n", pslot, poldslot);
+
+ // bit 0 - HPC_SLOT_POWER
+ if ((pslot->status & 0x01) != (poldslot->status & 0x01))
+ update = TRUE;
+
+ // bit 1 - HPC_SLOT_CONNECT
+ // ignore
+
+ // bit 2 - HPC_SLOT_ATTN
+ if ((pslot->status & 0x04) != (poldslot->status & 0x04))
+ update = TRUE;
+
+ // bit 3 - HPC_SLOT_PRSNT2
+ // bit 4 - HPC_SLOT_PRSNT1
+ if (((pslot->status & 0x08) != (poldslot->status & 0x08))
+ || ((pslot->status & 0x10) != (poldslot->status & 0x10)))
+ update = TRUE;
+
+ // bit 5 - HPC_SLOT_PWRGD
+ if ((pslot->status & 0x20) != (poldslot->status & 0x20))
+ // OFF -> ON: ignore, ON -> OFF: disable slot
+ if ((poldslot->status & 0x20) && (SLOT_CONNECT (poldslot->status) == HPC_SLOT_CONNECTED) && (SLOT_PRESENT (poldslot->status)))
+ disable = TRUE;
+
+ // bit 6 - HPC_SLOT_BUS_SPEED
+ // ignore
+
+ // bit 7 - HPC_SLOT_LATCH
+ if ((pslot->status & 0x80) != (poldslot->status & 0x80)) {
+ update = TRUE;
+ // OPEN -> CLOSE
+ if (pslot->status & 0x80) {
+ if (SLOT_PWRGD (pslot->status)) {
+ // power goes on and off after closing latch
+ // check again to make sure power is still ON
+ msleep(1000);
+ rc = ibmphp_hpc_readslot (pslot, READ_SLOTSTATUS, &status);
+ if (SLOT_PWRGD (status))
+ update = TRUE;
+ else // overwrite power in pslot to OFF
+ pslot->status &= ~HPC_SLOT_POWER;
+ }
+ }
+ // CLOSE -> OPEN
+ else if ((SLOT_PWRGD (poldslot->status) == HPC_SLOT_PWRGD_GOOD)
+ && (SLOT_CONNECT (poldslot->status) == HPC_SLOT_CONNECTED) && (SLOT_PRESENT (poldslot->status))) {
+ disable = TRUE;
+ }
+ // else - ignore
+ }
+ // bit 4 - HPC_SLOT_BLINK_ATTN
+ if ((pslot->ext_status & 0x08) != (poldslot->ext_status & 0x08))
+ update = TRUE;
+
+ if (disable) {
+ debug ("process_changeinstatus - disable slot\n");
+ pslot->flag = FALSE;
+ rc = ibmphp_do_disable_slot (pslot);
+ }
+
+ if (update || disable) {
+ ibmphp_update_slot_info (pslot);
+ }
+
+ debug ("%s - Exit rc[%d] disable[%x] update[%x]\n", __FUNCTION__, rc, disable, update);
+
+ return rc;
+}
+
+/*----------------------------------------------------------------------
+* Name: process_changeinlatch
+*
+* Action: compare old and new latch reg status, process the change
+*
+* Input: old and current latch register status
+*
+* Return 0 or error codes
+* Value:
+*---------------------------------------------------------------------*/
+static int process_changeinlatch (u8 old, u8 new, struct controller *ctrl)
+{
+ struct slot myslot, *pslot;
+ u8 i;
+ u8 mask;
+ int rc = 0;
+
+ debug ("%s - Entry old[%x], new[%x]\n", __FUNCTION__, old, new);
+ // bit 0 reserved, 0 is LSB, check bit 1-6 for 6 slots
+
+ for (i = ctrl->starting_slot_num; i <= ctrl->ending_slot_num; i++) {
+ mask = 0x01 << i;
+ if ((mask & old) != (mask & new)) {
+ pslot = ibmphp_get_slot_from_physical_num (i);
+ if (pslot) {
+ memcpy ((void *) &myslot, (void *) pslot, sizeof (struct slot));
+ rc = ibmphp_hpc_readslot (pslot, READ_ALLSTAT, NULL);
+ debug ("%s - call process_changeinstatus for slot[%d]\n", __FUNCTION__, i);
+ process_changeinstatus (pslot, &myslot);
+ } else {
+ rc = -EINVAL;
+ err ("%s - Error bad pointer for slot[%d]\n", __FUNCTION__, i);
+ }
+ }
+ }
+ debug ("%s - Exit rc[%d]\n", __FUNCTION__, rc);
+ return rc;
+}
+
+/*----------------------------------------------------------------------
+* Name: hpc_poll_thread
+*
+* Action: polling
+*
+* Return 0
+* Value:
+*---------------------------------------------------------------------*/
+static int hpc_poll_thread (void *data)
+{
+ debug ("%s - Entry\n", __FUNCTION__);
+
+ daemonize("hpc_poll");
+ allow_signal(SIGKILL);
+
+ poll_hpc ();
+
+ tid_poll = 0;
+ debug ("%s - Exit\n", __FUNCTION__);
+ return 0;
+}
+
+
+/*----------------------------------------------------------------------
+* Name: ibmphp_hpc_start_poll_thread
+*
+* Action: start polling thread
+*---------------------------------------------------------------------*/
+int __init ibmphp_hpc_start_poll_thread (void)
+{
+ int rc = 0;
+
+ debug ("%s - Entry\n", __FUNCTION__);
+
+ tid_poll = kernel_thread (hpc_poll_thread, NULL, 0);
+ if (tid_poll < 0) {
+ err ("%s - Error, thread not started\n", __FUNCTION__);
+ rc = -1;
+ }
+
+ debug ("%s - Exit tid_poll[%d] rc[%d]\n", __FUNCTION__, tid_poll, rc);
+ return rc;
+}
+
+/*----------------------------------------------------------------------
+* Name: ibmphp_hpc_stop_poll_thread
+*
+* Action: stop polling thread and cleanup
+*---------------------------------------------------------------------*/
+void __exit ibmphp_hpc_stop_poll_thread (void)
+{
+ debug ("%s - Entry\n", __FUNCTION__);
+
+ ibmphp_shutdown = TRUE;
+ debug ("before locking operations \n");
+ ibmphp_lock_operations ();
+ debug ("after locking operations \n");
+
+ // wait for poll thread to exit
+ debug ("before sem_exit down \n");
+ down (&sem_exit);
+ debug ("after sem_exit down \n");
+
+ // cleanup
+ debug ("before free_hpc_access \n");
+ free_hpc_access ();
+ debug ("after free_hpc_access \n");
+ ibmphp_unlock_operations ();
+ debug ("after unlock operations \n");
+ up (&sem_exit);
+ debug ("after sem exit up\n");
+
+ debug ("%s - Exit\n", __FUNCTION__);
+}
+
+/*----------------------------------------------------------------------
+* Name: hpc_wait_ctlr_notworking
+*
+* Action: wait until the controller is in a not working state
+*
+* Return 0, HPC_ERROR
+* Value:
+*---------------------------------------------------------------------*/
+static int hpc_wait_ctlr_notworking (int timeout, struct controller *ctlr_ptr, void __iomem *wpg_bbar,
+ u8 * pstatus)
+{
+ int rc = 0;
+ u8 done = FALSE;
+
+ debug_polling ("hpc_wait_ctlr_notworking - Entry timeout[%d]\n", timeout);
+
+ while (!done) {
+ *pstatus = ctrl_read (ctlr_ptr, wpg_bbar, WPG_CTLR_INDEX);
+ if (*pstatus == HPC_ERROR) {
+ rc = HPC_ERROR;
+ done = TRUE;
+ }
+ if (CTLR_WORKING (*pstatus) == HPC_CTLR_WORKING_NO)
+ done = TRUE;
+ if (!done) {
+ msleep(1000);
+ if (timeout < 1) {
+ done = TRUE;
+ err ("HPCreadslot - Error ctlr timeout\n");
+ rc = HPC_ERROR;
+ } else
+ timeout--;
+ }
+ }
+ debug_polling ("hpc_wait_ctlr_notworking - Exit rc[%x] status[%x]\n", rc, *pstatus);
+ return rc;
+}