Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/drivers/pci/hotplug/shpchp_hpc.c b/drivers/pci/hotplug/shpchp_hpc.c
new file mode 100644
index 0000000..38c5d90
--- /dev/null
+++ b/drivers/pci/hotplug/shpchp_hpc.c
@@ -0,0 +1,1620 @@
+/*
+ * Standard PCI Hot Plug Driver
+ *
+ * Copyright (C) 1995,2001 Compaq Computer Corporation
+ * Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com)
+ * Copyright (C) 2001 IBM Corp.
+ * Copyright (C) 2003-2004 Intel Corporation
+ *
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Send feedback to <greg@kroah.com>,<dely.l.sy@intel.com>
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <linux/vmalloc.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include <asm/system.h>
+#include "shpchp.h"
+
+#ifdef DEBUG
+#define DBG_K_TRACE_ENTRY ((unsigned int)0x00000001) /* On function entry */
+#define DBG_K_TRACE_EXIT ((unsigned int)0x00000002) /* On function exit */
+#define DBG_K_INFO ((unsigned int)0x00000004) /* Info messages */
+#define DBG_K_ERROR ((unsigned int)0x00000008) /* Error messages */
+#define DBG_K_TRACE (DBG_K_TRACE_ENTRY|DBG_K_TRACE_EXIT)
+#define DBG_K_STANDARD (DBG_K_INFO|DBG_K_ERROR|DBG_K_TRACE)
+/* Redefine this flagword to set debug level */
+#define DEBUG_LEVEL DBG_K_STANDARD
+
+#define DEFINE_DBG_BUFFER char __dbg_str_buf[256];
+
+#define DBG_PRINT( dbg_flags, args... ) \
+ do { \
+ if ( DEBUG_LEVEL & ( dbg_flags ) ) \
+ { \
+ int len; \
+ len = sprintf( __dbg_str_buf, "%s:%d: %s: ", \
+ __FILE__, __LINE__, __FUNCTION__ ); \
+ sprintf( __dbg_str_buf + len, args ); \
+ printk( KERN_NOTICE "%s\n", __dbg_str_buf ); \
+ } \
+ } while (0)
+
+#define DBG_ENTER_ROUTINE DBG_PRINT (DBG_K_TRACE_ENTRY, "%s", "[Entry]");
+#define DBG_LEAVE_ROUTINE DBG_PRINT (DBG_K_TRACE_EXIT, "%s", "[Exit]");
+#else
+#define DEFINE_DBG_BUFFER
+#define DBG_ENTER_ROUTINE
+#define DBG_LEAVE_ROUTINE
+#endif /* DEBUG */
+
+/* Slot Available Register I field definition */
+#define SLOT_33MHZ 0x0000001f
+#define SLOT_66MHZ_PCIX 0x00001f00
+#define SLOT_100MHZ_PCIX 0x001f0000
+#define SLOT_133MHZ_PCIX 0x1f000000
+
+/* Slot Available Register II field definition */
+#define SLOT_66MHZ 0x0000001f
+#define SLOT_66MHZ_PCIX_266 0x00000f00
+#define SLOT_100MHZ_PCIX_266 0x0000f000
+#define SLOT_133MHZ_PCIX_266 0x000f0000
+#define SLOT_66MHZ_PCIX_533 0x00f00000
+#define SLOT_100MHZ_PCIX_533 0x0f000000
+#define SLOT_133MHZ_PCIX_533 0xf0000000
+
+
+/* Secondary Bus Configuration Register */
+/* For PI = 1, Bits 0 to 2 have been encoded as follows to show current bus speed/mode */
+#define PCI_33MHZ 0x0
+#define PCI_66MHZ 0x1
+#define PCIX_66MHZ 0x2
+#define PCIX_100MHZ 0x3
+#define PCIX_133MHZ 0x4
+
+/* For PI = 2, Bits 0 to 3 have been encoded as follows to show current bus speed/mode */
+#define PCI_33MHZ 0x0
+#define PCI_66MHZ 0x1
+#define PCIX_66MHZ 0x2
+#define PCIX_100MHZ 0x3
+#define PCIX_133MHZ 0x4
+#define PCIX_66MHZ_ECC 0x5
+#define PCIX_100MHZ_ECC 0x6
+#define PCIX_133MHZ_ECC 0x7
+#define PCIX_66MHZ_266 0x9
+#define PCIX_100MHZ_266 0xa
+#define PCIX_133MHZ_266 0xb
+#define PCIX_66MHZ_533 0x11
+#define PCIX_100MHZ_533 0x12
+#define PCIX_133MHZ_533 0x13
+
+/* Slot Configuration */
+#define SLOT_NUM 0x0000001F
+#define FIRST_DEV_NUM 0x00001F00
+#define PSN 0x07FF0000
+#define UPDOWN 0x20000000
+#define MRLSENSOR 0x40000000
+#define ATTN_BUTTON 0x80000000
+
+/* Slot Status Field Definitions */
+/* Slot State */
+#define PWR_ONLY 0x0001
+#define ENABLED 0x0002
+#define DISABLED 0x0003
+
+/* Power Indicator State */
+#define PWR_LED_ON 0x0004
+#define PWR_LED_BLINK 0x0008
+#define PWR_LED_OFF 0x000c
+
+/* Attention Indicator State */
+#define ATTEN_LED_ON 0x0010
+#define ATTEN_LED_BLINK 0x0020
+#define ATTEN_LED_OFF 0x0030
+
+/* Power Fault */
+#define pwr_fault 0x0040
+
+/* Attention Button */
+#define ATTEN_BUTTON 0x0080
+
+/* MRL Sensor */
+#define MRL_SENSOR 0x0100
+
+/* 66 MHz Capable */
+#define IS_66MHZ_CAP 0x0200
+
+/* PRSNT1#/PRSNT2# */
+#define SLOT_EMP 0x0c00
+
+/* PCI-X Capability */
+#define NON_PCIX 0x0000
+#define PCIX_66 0x1000
+#define PCIX_133 0x3000
+#define PCIX_266 0x4000 /* For PI = 2 only */
+#define PCIX_533 0x5000 /* For PI = 2 only */
+
+/* SHPC 'write' operations/commands */
+
+/* Slot operation - 0x00h to 0x3Fh */
+
+#define NO_CHANGE 0x00
+
+/* Slot state - Bits 0 & 1 of controller command register */
+#define SET_SLOT_PWR 0x01
+#define SET_SLOT_ENABLE 0x02
+#define SET_SLOT_DISABLE 0x03
+
+/* Power indicator state - Bits 2 & 3 of controller command register*/
+#define SET_PWR_ON 0x04
+#define SET_PWR_BLINK 0x08
+#define SET_PWR_OFF 0x0C
+
+/* Attention indicator state - Bits 4 & 5 of controller command register*/
+#define SET_ATTN_ON 0x010
+#define SET_ATTN_BLINK 0x020
+#define SET_ATTN_OFF 0x030
+
+/* Set bus speed/mode A - 0x40h to 0x47h */
+#define SETA_PCI_33MHZ 0x40
+#define SETA_PCI_66MHZ 0x41
+#define SETA_PCIX_66MHZ 0x42
+#define SETA_PCIX_100MHZ 0x43
+#define SETA_PCIX_133MHZ 0x44
+#define RESERV_1 0x45
+#define RESERV_2 0x46
+#define RESERV_3 0x47
+
+/* Set bus speed/mode B - 0x50h to 0x5fh */
+#define SETB_PCI_33MHZ 0x50
+#define SETB_PCI_66MHZ 0x51
+#define SETB_PCIX_66MHZ_PM 0x52
+#define SETB_PCIX_100MHZ_PM 0x53
+#define SETB_PCIX_133MHZ_PM 0x54
+#define SETB_PCIX_66MHZ_EM 0x55
+#define SETB_PCIX_100MHZ_EM 0x56
+#define SETB_PCIX_133MHZ_EM 0x57
+#define SETB_PCIX_66MHZ_266 0x58
+#define SETB_PCIX_100MHZ_266 0x59
+#define SETB_PCIX_133MHZ_266 0x5a
+#define SETB_PCIX_66MHZ_533 0x5b
+#define SETB_PCIX_100MHZ_533 0x5c
+#define SETB_PCIX_133MHZ_533 0x5d
+
+
+/* Power-on all slots - 0x48h */
+#define SET_PWR_ON_ALL 0x48
+
+/* Enable all slots - 0x49h */
+#define SET_ENABLE_ALL 0x49
+
+/* SHPC controller command error code */
+#define SWITCH_OPEN 0x1
+#define INVALID_CMD 0x2
+#define INVALID_SPEED_MODE 0x4
+
+/* For accessing SHPC Working Register Set */
+#define DWORD_SELECT 0x2
+#define DWORD_DATA 0x4
+#define BASE_OFFSET 0x0
+
+/* Field Offset in Logical Slot Register - byte boundary */
+#define SLOT_EVENT_LATCH 0x2
+#define SLOT_SERR_INT_MASK 0x3
+
+static spinlock_t hpc_event_lock;
+
+DEFINE_DBG_BUFFER /* Debug string buffer for entire HPC defined here */
+static struct php_ctlr_state_s *php_ctlr_list_head; /* HPC state linked list */
+static int ctlr_seq_num = 0; /* Controller sequenc # */
+static spinlock_t list_lock;
+
+static irqreturn_t shpc_isr(int IRQ, void *dev_id, struct pt_regs *regs);
+
+static void start_int_poll_timer(struct php_ctlr_state_s *php_ctlr, int seconds);
+
+/* This is the interrupt polling timeout function. */
+static void int_poll_timeout(unsigned long lphp_ctlr)
+{
+ struct php_ctlr_state_s *php_ctlr = (struct php_ctlr_state_s *)lphp_ctlr;
+
+ DBG_ENTER_ROUTINE
+
+ if ( !php_ctlr ) {
+ err("%s: Invalid HPC controller handle!\n", __FUNCTION__);
+ return;
+ }
+
+ /* Poll for interrupt events. regs == NULL => polling */
+ shpc_isr( 0, (void *)php_ctlr, NULL );
+
+ init_timer(&php_ctlr->int_poll_timer);
+ if (!shpchp_poll_time)
+ shpchp_poll_time = 2; /* reset timer to poll in 2 secs if user doesn't specify at module installation*/
+
+ start_int_poll_timer(php_ctlr, shpchp_poll_time);
+
+ return;
+}
+
+/* This function starts the interrupt polling timer. */
+static void start_int_poll_timer(struct php_ctlr_state_s *php_ctlr, int seconds)
+{
+ if (!php_ctlr) {
+ err("%s: Invalid HPC controller handle!\n", __FUNCTION__);
+ return;
+ }
+
+ if ( ( seconds <= 0 ) || ( seconds > 60 ) )
+ seconds = 2; /* Clamp to sane value */
+
+ php_ctlr->int_poll_timer.function = &int_poll_timeout;
+ php_ctlr->int_poll_timer.data = (unsigned long)php_ctlr; /* Instance data */
+ php_ctlr->int_poll_timer.expires = jiffies + seconds * HZ;
+ add_timer(&php_ctlr->int_poll_timer);
+
+ return;
+}
+
+static int shpc_write_cmd(struct slot *slot, u8 t_slot, u8 cmd)
+{
+ struct php_ctlr_state_s *php_ctlr = (struct php_ctlr_state_s *) slot->ctrl->hpc_ctlr_handle;
+ u16 cmd_status;
+ int retval = 0;
+ u16 temp_word;
+ int i;
+
+ DBG_ENTER_ROUTINE
+
+ if (!php_ctlr) {
+ err("%s: Invalid HPC controller handle!\n", __FUNCTION__);
+ return -1;
+ }
+
+ for (i = 0; i < 10; i++) {
+ cmd_status = readw(php_ctlr->creg + CMD_STATUS);
+
+ if (!(cmd_status & 0x1))
+ break;
+ /* Check every 0.1 sec for a total of 1 sec*/
+ msleep(100);
+ }
+
+ cmd_status = readw(php_ctlr->creg + CMD_STATUS);
+
+ if (cmd_status & 0x1) {
+ /* After 1 sec and and the controller is still busy */
+ err("%s : Controller is still busy after 1 sec.\n", __FUNCTION__);
+ return -1;
+ }
+
+ ++t_slot;
+ temp_word = (t_slot << 8) | (cmd & 0xFF);
+ dbg("%s: t_slot %x cmd %x\n", __FUNCTION__, t_slot, cmd);
+
+ /* To make sure the Controller Busy bit is 0 before we send out the
+ * command.
+ */
+ writew(temp_word, php_ctlr->creg + CMD);
+ dbg("%s: temp_word written %x\n", __FUNCTION__, temp_word);
+
+ DBG_LEAVE_ROUTINE
+ return retval;
+}
+
+static int hpc_check_cmd_status(struct controller *ctrl)
+{
+ struct php_ctlr_state_s *php_ctlr = (struct php_ctlr_state_s *) ctrl->hpc_ctlr_handle;
+ u16 cmd_status;
+ int retval = 0;
+
+ DBG_ENTER_ROUTINE
+
+ if (!ctrl->hpc_ctlr_handle) {
+ err("%s: Invalid HPC controller handle!\n", __FUNCTION__);
+ return -1;
+ }
+
+ cmd_status = readw(php_ctlr->creg + CMD_STATUS) & 0x000F;
+
+ switch (cmd_status >> 1) {
+ case 0:
+ retval = 0;
+ break;
+ case 1:
+ retval = SWITCH_OPEN;
+ err("%s: Switch opened!\n", __FUNCTION__);
+ break;
+ case 2:
+ retval = INVALID_CMD;
+ err("%s: Invalid HPC command!\n", __FUNCTION__);
+ break;
+ case 4:
+ retval = INVALID_SPEED_MODE;
+ err("%s: Invalid bus speed/mode!\n", __FUNCTION__);
+ break;
+ default:
+ retval = cmd_status;
+ }
+
+ DBG_LEAVE_ROUTINE
+ return retval;
+}
+
+
+static int hpc_get_attention_status(struct slot *slot, u8 *status)
+{
+ struct php_ctlr_state_s *php_ctlr = (struct php_ctlr_state_s *) slot->ctrl->hpc_ctlr_handle;
+ u32 slot_reg;
+ u16 slot_status;
+ u8 atten_led_state;
+
+ DBG_ENTER_ROUTINE
+
+ if (!slot->ctrl->hpc_ctlr_handle) {
+ err("%s: Invalid HPC controller handle!\n", __FUNCTION__);
+ return -1;
+ }
+
+ slot_reg = readl(php_ctlr->creg + SLOT1 + 4*(slot->hp_slot));
+ slot_status = (u16) slot_reg;
+ atten_led_state = (slot_status & 0x0030) >> 4;
+
+ switch (atten_led_state) {
+ case 0:
+ *status = 0xFF; /* Reserved */
+ break;
+ case 1:
+ *status = 1; /* On */
+ break;
+ case 2:
+ *status = 2; /* Blink */
+ break;
+ case 3:
+ *status = 0; /* Off */
+ break;
+ default:
+ *status = 0xFF;
+ break;
+ }
+
+ DBG_LEAVE_ROUTINE
+ return 0;
+}
+
+static int hpc_get_power_status(struct slot * slot, u8 *status)
+{
+ struct php_ctlr_state_s *php_ctlr = (struct php_ctlr_state_s *) slot->ctrl->hpc_ctlr_handle;
+ u32 slot_reg;
+ u16 slot_status;
+ u8 slot_state;
+ int retval = 0;
+
+ DBG_ENTER_ROUTINE
+
+ if (!slot->ctrl->hpc_ctlr_handle) {
+ err("%s: Invalid HPC controller handle!\n", __FUNCTION__);
+ return -1;
+ }
+
+ slot_reg = readl(php_ctlr->creg + SLOT1 + 4*(slot->hp_slot));
+ slot_status = (u16) slot_reg;
+ slot_state = (slot_status & 0x0003);
+
+ switch (slot_state) {
+ case 0:
+ *status = 0xFF;
+ break;
+ case 1:
+ *status = 2; /* Powered only */
+ break;
+ case 2:
+ *status = 1; /* Enabled */
+ break;
+ case 3:
+ *status = 0; /* Disabled */
+ break;
+ default:
+ *status = 0xFF;
+ break;
+ }
+
+ DBG_LEAVE_ROUTINE
+ return retval;
+}
+
+
+static int hpc_get_latch_status(struct slot *slot, u8 *status)
+{
+ struct php_ctlr_state_s *php_ctlr = (struct php_ctlr_state_s *) slot->ctrl->hpc_ctlr_handle;
+ u32 slot_reg;
+ u16 slot_status;
+
+ DBG_ENTER_ROUTINE
+
+ if (!slot->ctrl->hpc_ctlr_handle) {
+ err("%s: Invalid HPC controller handle!\n", __FUNCTION__);
+ return -1;
+ }
+
+ slot_reg = readl(php_ctlr->creg + SLOT1 + 4*(slot->hp_slot));
+ slot_status = (u16)slot_reg;
+
+ *status = ((slot_status & 0x0100) == 0) ? 0 : 1; /* 0 -> close; 1 -> open */
+
+
+ DBG_LEAVE_ROUTINE
+ return 0;
+}
+
+static int hpc_get_adapter_status(struct slot *slot, u8 *status)
+{
+ struct php_ctlr_state_s *php_ctlr = (struct php_ctlr_state_s *) slot->ctrl->hpc_ctlr_handle;
+ u32 slot_reg;
+ u16 slot_status;
+ u8 card_state;
+
+ DBG_ENTER_ROUTINE
+
+ if (!slot->ctrl->hpc_ctlr_handle) {
+ err("%s: Invalid HPC controller handle!\n", __FUNCTION__);
+ return -1;
+ }
+
+ slot_reg = readl(php_ctlr->creg + SLOT1 + 4*(slot->hp_slot));
+ slot_status = (u16)slot_reg;
+ card_state = (u8)((slot_status & 0x0C00) >> 10);
+ *status = (card_state != 0x3) ? 1 : 0;
+
+ DBG_LEAVE_ROUTINE
+ return 0;
+}
+
+static int hpc_get_prog_int(struct slot *slot, u8 *prog_int)
+{
+ struct php_ctlr_state_s *php_ctlr = (struct php_ctlr_state_s *) slot->ctrl->hpc_ctlr_handle;
+
+ DBG_ENTER_ROUTINE
+
+ if (!slot->ctrl->hpc_ctlr_handle) {
+ err("%s: Invalid HPC controller handle!\n", __FUNCTION__);
+ return -1;
+ }
+
+ *prog_int = readb(php_ctlr->creg + PROG_INTERFACE);
+
+ DBG_LEAVE_ROUTINE
+ return 0;
+}
+
+static int hpc_get_adapter_speed(struct slot *slot, enum pci_bus_speed *value)
+{
+ struct php_ctlr_state_s *php_ctlr = (struct php_ctlr_state_s *) slot->ctrl->hpc_ctlr_handle;
+ u32 slot_reg;
+ u16 slot_status, sec_bus_status;
+ u8 m66_cap, pcix_cap, pi;
+ int retval = 0;
+
+ DBG_ENTER_ROUTINE
+
+ if (!slot->ctrl->hpc_ctlr_handle) {
+ err("%s: Invalid HPC controller handle!\n", __FUNCTION__);
+ return -1;
+ }
+
+ if (slot->hp_slot >= php_ctlr->num_slots) {
+ err("%s: Invalid HPC slot number!\n", __FUNCTION__);
+ return -1;
+ }
+
+ pi = readb(php_ctlr->creg + PROG_INTERFACE);
+ slot_reg = readl(php_ctlr->creg + SLOT1 + 4*(slot->hp_slot));
+ dbg("%s: pi = %d, slot_reg = %x\n", __FUNCTION__, pi, slot_reg);
+ slot_status = (u16) slot_reg;
+ dbg("%s: slot_status = %x\n", __FUNCTION__, slot_status);
+ sec_bus_status = readw(php_ctlr->creg + SEC_BUS_CONFIG);
+
+ pcix_cap = (u8) ((slot_status & 0x3000) >> 12);
+ dbg("%s: pcix_cap = %x\n", __FUNCTION__, pcix_cap);
+ m66_cap = (u8) ((slot_status & 0x0200) >> 9);
+ dbg("%s: m66_cap = %x\n", __FUNCTION__, m66_cap);
+
+
+ if (pi == 2) {
+ switch (pcix_cap) {
+ case 0:
+ *value = m66_cap ? PCI_SPEED_66MHz : PCI_SPEED_33MHz;
+ break;
+ case 1:
+ *value = PCI_SPEED_66MHz_PCIX;
+ break;
+ case 3:
+ *value = PCI_SPEED_133MHz_PCIX;
+ break;
+ case 4:
+ *value = PCI_SPEED_133MHz_PCIX_266;
+ break;
+ case 5:
+ *value = PCI_SPEED_133MHz_PCIX_533;
+ break;
+ case 2: /* Reserved */
+ default:
+ *value = PCI_SPEED_UNKNOWN;
+ retval = -ENODEV;
+ break;
+ }
+ } else {
+ switch (pcix_cap) {
+ case 0:
+ *value = m66_cap ? PCI_SPEED_66MHz : PCI_SPEED_33MHz;
+ break;
+ case 1:
+ *value = PCI_SPEED_66MHz_PCIX;
+ break;
+ case 3:
+ *value = PCI_SPEED_133MHz_PCIX;
+ break;
+ case 2: /* Reserved */
+ default:
+ *value = PCI_SPEED_UNKNOWN;
+ retval = -ENODEV;
+ break;
+ }
+ }
+
+ dbg("Adapter speed = %d\n", *value);
+
+ DBG_LEAVE_ROUTINE
+ return retval;
+}
+
+static int hpc_get_mode1_ECC_cap(struct slot *slot, u8 *mode)
+{
+ struct php_ctlr_state_s *php_ctlr = (struct php_ctlr_state_s *) slot->ctrl->hpc_ctlr_handle;
+ u16 sec_bus_status;
+ u8 pi;
+ int retval = 0;
+
+ DBG_ENTER_ROUTINE
+
+ if (!slot->ctrl->hpc_ctlr_handle) {
+ err("%s: Invalid HPC controller handle!\n", __FUNCTION__);
+ return -1;
+ }
+
+ pi = readb(php_ctlr->creg + PROG_INTERFACE);
+ sec_bus_status = readw(php_ctlr->creg + SEC_BUS_CONFIG);
+
+ if (pi == 2) {
+ *mode = (sec_bus_status & 0x0100) >> 7;
+ } else {
+ retval = -1;
+ }
+
+ dbg("Mode 1 ECC cap = %d\n", *mode);
+
+ DBG_LEAVE_ROUTINE
+ return retval;
+}
+
+static int hpc_query_power_fault(struct slot * slot)
+{
+ struct php_ctlr_state_s *php_ctlr = (struct php_ctlr_state_s *) slot->ctrl->hpc_ctlr_handle;
+ u32 slot_reg;
+ u16 slot_status;
+ u8 pwr_fault_state, status;
+
+ DBG_ENTER_ROUTINE
+
+ if (!slot->ctrl->hpc_ctlr_handle) {
+ err("%s: Invalid HPC controller handle!\n", __FUNCTION__);
+ return -1;
+ }
+
+ slot_reg = readl(php_ctlr->creg + SLOT1 + 4*(slot->hp_slot));
+ slot_status = (u16) slot_reg;
+ pwr_fault_state = (slot_status & 0x0040) >> 7;
+ status = (pwr_fault_state == 1) ? 0 : 1;
+
+ DBG_LEAVE_ROUTINE
+ /* Note: Logic 0 => fault */
+ return status;
+}
+
+static int hpc_set_attention_status(struct slot *slot, u8 value)
+{
+ struct php_ctlr_state_s *php_ctlr =(struct php_ctlr_state_s *) slot->ctrl->hpc_ctlr_handle;
+ u8 slot_cmd = 0;
+ int rc = 0;
+
+ if (!slot->ctrl->hpc_ctlr_handle) {
+ err("%s: Invalid HPC controller handle!\n", __FUNCTION__);
+ return -1;
+ }
+
+ if (slot->hp_slot >= php_ctlr->num_slots) {
+ err("%s: Invalid HPC slot number!\n", __FUNCTION__);
+ return -1;
+ }
+
+ switch (value) {
+ case 0 :
+ slot_cmd = 0x30; /* OFF */
+ break;
+ case 1:
+ slot_cmd = 0x10; /* ON */
+ break;
+ case 2:
+ slot_cmd = 0x20; /* BLINK */
+ break;
+ default:
+ return -1;
+ }
+
+ shpc_write_cmd(slot, slot->hp_slot, slot_cmd);
+
+ return rc;
+}
+
+
+static void hpc_set_green_led_on(struct slot *slot)
+{
+ struct php_ctlr_state_s *php_ctlr =(struct php_ctlr_state_s *) slot->ctrl->hpc_ctlr_handle;
+ u8 slot_cmd;
+
+ if (!slot->ctrl->hpc_ctlr_handle) {
+ err("%s: Invalid HPC controller handle!\n", __FUNCTION__);
+ return ;
+ }
+
+ if (slot->hp_slot >= php_ctlr->num_slots) {
+ err("%s: Invalid HPC slot number!\n", __FUNCTION__);
+ return ;
+ }
+
+ slot_cmd = 0x04;
+
+ shpc_write_cmd(slot, slot->hp_slot, slot_cmd);
+
+ return;
+}
+
+static void hpc_set_green_led_off(struct slot *slot)
+{
+ struct php_ctlr_state_s *php_ctlr =(struct php_ctlr_state_s *) slot->ctrl->hpc_ctlr_handle;
+ u8 slot_cmd;
+
+ if (!slot->ctrl->hpc_ctlr_handle) {
+ err("%s: Invalid HPC controller handle!\n", __FUNCTION__);
+ return ;
+ }
+
+ if (slot->hp_slot >= php_ctlr->num_slots) {
+ err("%s: Invalid HPC slot number!\n", __FUNCTION__);
+ return ;
+ }
+
+ slot_cmd = 0x0C;
+
+ shpc_write_cmd(slot, slot->hp_slot, slot_cmd);
+
+ return;
+}
+
+static void hpc_set_green_led_blink(struct slot *slot)
+{
+ struct php_ctlr_state_s *php_ctlr =(struct php_ctlr_state_s *) slot->ctrl->hpc_ctlr_handle;
+ u8 slot_cmd;
+
+ if (!slot->ctrl->hpc_ctlr_handle) {
+ err("%s: Invalid HPC controller handle!\n", __FUNCTION__);
+ return ;
+ }
+
+ if (slot->hp_slot >= php_ctlr->num_slots) {
+ err("%s: Invalid HPC slot number!\n", __FUNCTION__);
+ return ;
+ }
+
+ slot_cmd = 0x08;
+
+ shpc_write_cmd(slot, slot->hp_slot, slot_cmd);
+
+ return;
+}
+
+int shpc_get_ctlr_slot_config(struct controller *ctrl,
+ int *num_ctlr_slots, /* number of slots in this HPC */
+ int *first_device_num, /* PCI dev num of the first slot in this SHPC */
+ int *physical_slot_num, /* phy slot num of the first slot in this SHPC */
+ int *updown, /* physical_slot_num increament: 1 or -1 */
+ int *flags)
+{
+ struct php_ctlr_state_s *php_ctlr = (struct php_ctlr_state_s *) ctrl->hpc_ctlr_handle;
+
+ DBG_ENTER_ROUTINE
+
+ if (!ctrl->hpc_ctlr_handle) {
+ err("%s: Invalid HPC controller handle!\n", __FUNCTION__);
+ return -1;
+ }
+
+ *first_device_num = php_ctlr->slot_device_offset; /* Obtained in shpc_init() */
+ *num_ctlr_slots = php_ctlr->num_slots; /* Obtained in shpc_init() */
+
+ *physical_slot_num = (readl(php_ctlr->creg + SLOT_CONFIG) & PSN) >> 16;
+ dbg("%s: physical_slot_num = %x\n", __FUNCTION__, *physical_slot_num);
+ *updown = ((readl(php_ctlr->creg + SLOT_CONFIG) & UPDOWN ) >> 29) ? 1 : -1;
+
+ DBG_LEAVE_ROUTINE
+ return 0;
+}
+
+static void hpc_release_ctlr(struct controller *ctrl)
+{
+ struct php_ctlr_state_s *php_ctlr = (struct php_ctlr_state_s *) ctrl->hpc_ctlr_handle;
+ struct php_ctlr_state_s *p, *p_prev;
+
+ DBG_ENTER_ROUTINE
+
+ if (!ctrl->hpc_ctlr_handle) {
+ err("%s: Invalid HPC controller handle!\n", __FUNCTION__);
+ return ;
+ }
+
+ if (shpchp_poll_mode) {
+ del_timer(&php_ctlr->int_poll_timer);
+ } else {
+ if (php_ctlr->irq) {
+ free_irq(php_ctlr->irq, ctrl);
+ php_ctlr->irq = 0;
+ pci_disable_msi(php_ctlr->pci_dev);
+ }
+ }
+ if (php_ctlr->pci_dev) {
+ dbg("%s: before calling iounmap & release_mem_region\n", __FUNCTION__);
+ iounmap(php_ctlr->creg);
+ release_mem_region(pci_resource_start(php_ctlr->pci_dev, 0), pci_resource_len(php_ctlr->pci_dev, 0));
+ dbg("%s: before calling iounmap & release_mem_region\n", __FUNCTION__);
+ php_ctlr->pci_dev = NULL;
+ }
+
+ spin_lock(&list_lock);
+ p = php_ctlr_list_head;
+ p_prev = NULL;
+ while (p) {
+ if (p == php_ctlr) {
+ if (p_prev)
+ p_prev->pnext = p->pnext;
+ else
+ php_ctlr_list_head = p->pnext;
+ break;
+ } else {
+ p_prev = p;
+ p = p->pnext;
+ }
+ }
+ spin_unlock(&list_lock);
+
+ kfree(php_ctlr);
+
+DBG_LEAVE_ROUTINE
+
+}
+
+static int hpc_power_on_slot(struct slot * slot)
+{
+ struct php_ctlr_state_s *php_ctlr = (struct php_ctlr_state_s *) slot->ctrl->hpc_ctlr_handle;
+ u8 slot_cmd;
+ int retval = 0;
+
+ DBG_ENTER_ROUTINE
+
+ if (!slot->ctrl->hpc_ctlr_handle) {
+ err("%s: Invalid HPC controller handle!\n", __FUNCTION__);
+ return -1;
+ }
+
+ if (slot->hp_slot >= php_ctlr->num_slots) {
+ err("%s: Invalid HPC slot number!\n", __FUNCTION__);
+ return -1;
+ }
+ slot_cmd = 0x01;
+
+ retval = shpc_write_cmd(slot, slot->hp_slot, slot_cmd);
+
+ if (retval) {
+ err("%s: Write command failed!\n", __FUNCTION__);
+ return -1;
+ }
+
+ DBG_LEAVE_ROUTINE
+
+ return retval;
+}
+
+static int hpc_slot_enable(struct slot * slot)
+{
+ struct php_ctlr_state_s *php_ctlr = (struct php_ctlr_state_s *) slot->ctrl->hpc_ctlr_handle;
+ u8 slot_cmd;
+ int retval = 0;
+
+ DBG_ENTER_ROUTINE
+
+ if (!slot->ctrl->hpc_ctlr_handle) {
+ err("%s: Invalid HPC controller handle!\n", __FUNCTION__);
+ return -1;
+ }
+
+ if (slot->hp_slot >= php_ctlr->num_slots) {
+ err("%s: Invalid HPC slot number!\n", __FUNCTION__);
+ return -1;
+ }
+ /* 3A => Slot - Enable, Power Indicator - Blink, Attention Indicator - Off */
+ slot_cmd = 0x3A;
+
+ retval = shpc_write_cmd(slot, slot->hp_slot, slot_cmd);
+
+ if (retval) {
+ err("%s: Write command failed!\n", __FUNCTION__);
+ return -1;
+ }
+
+ DBG_LEAVE_ROUTINE
+ return retval;
+}
+
+static int hpc_slot_disable(struct slot * slot)
+{
+ struct php_ctlr_state_s *php_ctlr = (struct php_ctlr_state_s *) slot->ctrl->hpc_ctlr_handle;
+ u8 slot_cmd;
+ int retval = 0;
+
+ DBG_ENTER_ROUTINE
+
+ if (!slot->ctrl->hpc_ctlr_handle) {
+ err("%s: Invalid HPC controller handle!\n", __FUNCTION__);
+ return -1;
+ }
+
+ if (slot->hp_slot >= php_ctlr->num_slots) {
+ err("%s: Invalid HPC slot number!\n", __FUNCTION__);
+ return -1;
+ }
+
+ /* 1F => Slot - Disable, Power Indicator - Off, Attention Indicator - On */
+ slot_cmd = 0x1F;
+
+ retval = shpc_write_cmd(slot, slot->hp_slot, slot_cmd);
+
+ if (retval) {
+ err("%s: Write command failed!\n", __FUNCTION__);
+ return -1;
+ }
+
+ DBG_LEAVE_ROUTINE
+ return retval;
+}
+
+static int hpc_enable_all_slots( struct slot *slot )
+{
+ int retval = 0;
+
+ DBG_ENTER_ROUTINE
+
+ if (!slot->ctrl->hpc_ctlr_handle) {
+ err("%s: Invalid HPC controller handle!\n", __FUNCTION__);
+ return -1;
+ }
+
+ retval = shpc_write_cmd(slot, 0, SET_ENABLE_ALL);
+ if (retval) {
+ err("%s: Write command failed!\n", __FUNCTION__);
+ return -1;
+ }
+
+ DBG_LEAVE_ROUTINE
+
+ return retval;
+}
+
+static int hpc_pwr_on_all_slots(struct slot *slot)
+{
+ int retval = 0;
+
+ DBG_ENTER_ROUTINE
+
+ retval = shpc_write_cmd(slot, 0, SET_PWR_ON_ALL);
+
+ if (retval) {
+ err("%s: Write command failed!\n", __FUNCTION__);
+ return -1;
+ }
+
+ DBG_LEAVE_ROUTINE
+ return retval;
+}
+
+static int hpc_set_bus_speed_mode(struct slot * slot, enum pci_bus_speed value)
+{
+ u8 slot_cmd;
+ u8 pi;
+ int retval = 0;
+ struct php_ctlr_state_s *php_ctlr = (struct php_ctlr_state_s *) slot->ctrl->hpc_ctlr_handle;
+
+ DBG_ENTER_ROUTINE
+
+ if (!slot->ctrl->hpc_ctlr_handle) {
+ err("%s: Invalid HPC controller handle!\n", __FUNCTION__);
+ return -1;
+ }
+
+ pi = readb(php_ctlr->creg + PROG_INTERFACE);
+
+ if (pi == 1) {
+ switch (value) {
+ case 0:
+ slot_cmd = SETA_PCI_33MHZ;
+ break;
+ case 1:
+ slot_cmd = SETA_PCI_66MHZ;
+ break;
+ case 2:
+ slot_cmd = SETA_PCIX_66MHZ;
+ break;
+ case 3:
+ slot_cmd = SETA_PCIX_100MHZ;
+ break;
+ case 4:
+ slot_cmd = SETA_PCIX_133MHZ;
+ break;
+ default:
+ slot_cmd = PCI_SPEED_UNKNOWN;
+ retval = -ENODEV;
+ return retval;
+ }
+ } else {
+ switch (value) {
+ case 0:
+ slot_cmd = SETB_PCI_33MHZ;
+ break;
+ case 1:
+ slot_cmd = SETB_PCI_66MHZ;
+ break;
+ case 2:
+ slot_cmd = SETB_PCIX_66MHZ_PM;
+ break;
+ case 3:
+ slot_cmd = SETB_PCIX_100MHZ_PM;
+ break;
+ case 4:
+ slot_cmd = SETB_PCIX_133MHZ_PM;
+ break;
+ case 5:
+ slot_cmd = SETB_PCIX_66MHZ_EM;
+ break;
+ case 6:
+ slot_cmd = SETB_PCIX_100MHZ_EM;
+ break;
+ case 7:
+ slot_cmd = SETB_PCIX_133MHZ_EM;
+ break;
+ case 8:
+ slot_cmd = SETB_PCIX_66MHZ_266;
+ break;
+ case 0x9:
+ slot_cmd = SETB_PCIX_100MHZ_266;
+ break;
+ case 0xa:
+ slot_cmd = SETB_PCIX_133MHZ_266;
+ break;
+ case 0xb:
+ slot_cmd = SETB_PCIX_66MHZ_533;
+ break;
+ case 0xc:
+ slot_cmd = SETB_PCIX_100MHZ_533;
+ break;
+ case 0xd:
+ slot_cmd = SETB_PCIX_133MHZ_533;
+ break;
+ default:
+ slot_cmd = PCI_SPEED_UNKNOWN;
+ retval = -ENODEV;
+ return retval;
+ }
+
+ }
+ retval = shpc_write_cmd(slot, 0, slot_cmd);
+ if (retval) {
+ err("%s: Write command failed!\n", __FUNCTION__);
+ return -1;
+ }
+
+ DBG_LEAVE_ROUTINE
+ return retval;
+}
+
+static irqreturn_t shpc_isr(int IRQ, void *dev_id, struct pt_regs *regs)
+{
+ struct controller *ctrl = NULL;
+ struct php_ctlr_state_s *php_ctlr;
+ u8 schedule_flag = 0;
+ u8 temp_byte;
+ u32 temp_dword, intr_loc, intr_loc2;
+ int hp_slot;
+
+ if (!dev_id)
+ return IRQ_NONE;
+
+ if (!shpchp_poll_mode) {
+ ctrl = (struct controller *)dev_id;
+ php_ctlr = ctrl->hpc_ctlr_handle;
+ } else {
+ php_ctlr = (struct php_ctlr_state_s *) dev_id;
+ ctrl = (struct controller *)php_ctlr->callback_instance_id;
+ }
+
+ if (!ctrl)
+ return IRQ_NONE;
+
+ if (!php_ctlr || !php_ctlr->creg)
+ return IRQ_NONE;
+
+ /* Check to see if it was our interrupt */
+ intr_loc = readl(php_ctlr->creg + INTR_LOC);
+
+ if (!intr_loc)
+ return IRQ_NONE;
+ dbg("%s: shpc_isr proceeds\n", __FUNCTION__);
+ dbg("%s: intr_loc = %x\n",__FUNCTION__, intr_loc);
+
+ if(!shpchp_poll_mode) {
+ /* Mask Global Interrupt Mask - see implementation note on p. 139 */
+ /* of SHPC spec rev 1.0*/
+ temp_dword = readl(php_ctlr->creg + SERR_INTR_ENABLE);
+ dbg("%s: Before masking global interrupt, temp_dword = %x\n",
+ __FUNCTION__, temp_dword);
+ temp_dword |= 0x00000001;
+ dbg("%s: After masking global interrupt, temp_dword = %x\n",
+ __FUNCTION__, temp_dword);
+ writel(temp_dword, php_ctlr->creg + SERR_INTR_ENABLE);
+
+ intr_loc2 = readl(php_ctlr->creg + INTR_LOC);
+ dbg("%s: intr_loc2 = %x\n",__FUNCTION__, intr_loc2);
+ }
+
+ if (intr_loc & 0x0001) {
+ /*
+ * Command Complete Interrupt Pending
+ * RO only - clear by writing 0 to the Command Completion
+ * Detect bit in Controller SERR-INT register
+ */
+ temp_dword = readl(php_ctlr->creg + SERR_INTR_ENABLE);
+ dbg("%s: Before clearing CCIP, temp_dword = %x\n",
+ __FUNCTION__, temp_dword);
+ temp_dword &= 0xfffeffff;
+ dbg("%s: After clearing CCIP, temp_dword = %x\n",
+ __FUNCTION__, temp_dword);
+ writel(temp_dword, php_ctlr->creg + SERR_INTR_ENABLE);
+ wake_up_interruptible(&ctrl->queue);
+ }
+
+ if ((intr_loc = (intr_loc >> 1)) == 0) {
+ /* Unmask Global Interrupt Mask */
+ temp_dword = readl(php_ctlr->creg + SERR_INTR_ENABLE);
+ dbg("%s: 1-Before unmasking global interrupt, temp_dword = %x\n",
+ __FUNCTION__, temp_dword);
+ temp_dword &= 0xfffffffe;
+ dbg("%s: 1-After unmasking global interrupt, temp_dword = %x\n",
+ __FUNCTION__, temp_dword);
+ writel(temp_dword, php_ctlr->creg + SERR_INTR_ENABLE);
+
+ return IRQ_NONE;
+ }
+
+ for (hp_slot = 0; hp_slot < ctrl->num_slots; hp_slot++) {
+ /* To find out which slot has interrupt pending */
+ if ((intr_loc >> hp_slot) & 0x01) {
+ temp_dword = readl(php_ctlr->creg + SLOT1 + (4*hp_slot));
+ dbg("%s: Slot %x with intr, temp_dword = %x\n",
+ __FUNCTION__, hp_slot, temp_dword);
+ temp_byte = (temp_dword >> 16) & 0xFF;
+ dbg("%s: Slot with intr, temp_byte = %x\n",
+ __FUNCTION__, temp_byte);
+ if ((php_ctlr->switch_change_callback) && (temp_byte & 0x08))
+ schedule_flag += php_ctlr->switch_change_callback(
+ hp_slot, php_ctlr->callback_instance_id);
+ if ((php_ctlr->attention_button_callback) && (temp_byte & 0x04))
+ schedule_flag += php_ctlr->attention_button_callback(
+ hp_slot, php_ctlr->callback_instance_id);
+ if ((php_ctlr->presence_change_callback) && (temp_byte & 0x01))
+ schedule_flag += php_ctlr->presence_change_callback(
+ hp_slot , php_ctlr->callback_instance_id);
+ if ((php_ctlr->power_fault_callback) && (temp_byte & 0x12))
+ schedule_flag += php_ctlr->power_fault_callback(
+ hp_slot, php_ctlr->callback_instance_id);
+
+ /* Clear all slot events */
+ temp_dword = 0xe01f3fff;
+ dbg("%s: Clearing slot events, temp_dword = %x\n",
+ __FUNCTION__, temp_dword);
+ writel(temp_dword, php_ctlr->creg + SLOT1 + (4*hp_slot));
+
+ intr_loc2 = readl(php_ctlr->creg + INTR_LOC);
+ dbg("%s: intr_loc2 = %x\n",__FUNCTION__, intr_loc2);
+ }
+ }
+ if (!shpchp_poll_mode) {
+ /* Unmask Global Interrupt Mask */
+ temp_dword = readl(php_ctlr->creg + SERR_INTR_ENABLE);
+ dbg("%s: 2-Before unmasking global interrupt, temp_dword = %x\n",
+ __FUNCTION__, temp_dword);
+ temp_dword &= 0xfffffffe;
+ dbg("%s: 2-After unmasking global interrupt, temp_dword = %x\n",
+ __FUNCTION__, temp_dword);
+ writel(temp_dword, php_ctlr->creg + SERR_INTR_ENABLE);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static int hpc_get_max_bus_speed (struct slot *slot, enum pci_bus_speed *value)
+{
+ struct php_ctlr_state_s *php_ctlr = (struct php_ctlr_state_s *) slot->ctrl->hpc_ctlr_handle;
+ enum pci_bus_speed bus_speed = PCI_SPEED_UNKNOWN;
+ int retval = 0;
+ u8 pi;
+ u32 slot_avail1, slot_avail2;
+ int slot_num;
+
+ DBG_ENTER_ROUTINE
+
+ if (!slot->ctrl->hpc_ctlr_handle) {
+ err("%s: Invalid HPC controller handle!\n", __FUNCTION__);
+ return -1;
+ }
+
+ if (slot->hp_slot >= php_ctlr->num_slots) {
+ err("%s: Invalid HPC slot number!\n", __FUNCTION__);
+ return -1;
+ }
+
+ pi = readb(php_ctlr->creg + PROG_INTERFACE);
+ slot_avail1 = readl(php_ctlr->creg + SLOT_AVAIL1);
+ slot_avail2 = readl(php_ctlr->creg + SLOT_AVAIL2);
+
+ if (pi == 2) {
+ if ((slot_num = ((slot_avail2 & SLOT_133MHZ_PCIX_533) >> 27) ) != 0 )
+ bus_speed = PCIX_133MHZ_533;
+ else if ((slot_num = ((slot_avail2 & SLOT_100MHZ_PCIX_533) >> 23) ) != 0 )
+ bus_speed = PCIX_100MHZ_533;
+ else if ((slot_num = ((slot_avail2 & SLOT_66MHZ_PCIX_533) >> 19) ) != 0 )
+ bus_speed = PCIX_66MHZ_533;
+ else if ((slot_num = ((slot_avail2 & SLOT_133MHZ_PCIX_266) >> 15) ) != 0 )
+ bus_speed = PCIX_133MHZ_266;
+ else if ((slot_num = ((slot_avail2 & SLOT_100MHZ_PCIX_266) >> 11) ) != 0 )
+ bus_speed = PCIX_100MHZ_266;
+ else if ((slot_num = ((slot_avail2 & SLOT_66MHZ_PCIX_266) >> 7) ) != 0 )
+ bus_speed = PCIX_66MHZ_266;
+ else if ((slot_num = ((slot_avail1 & SLOT_133MHZ_PCIX) >> 23) ) != 0 )
+ bus_speed = PCIX_133MHZ;
+ else if ((slot_num = ((slot_avail1 & SLOT_100MHZ_PCIX) >> 15) ) != 0 )
+ bus_speed = PCIX_100MHZ;
+ else if ((slot_num = ((slot_avail1 & SLOT_66MHZ_PCIX) >> 7) ) != 0 )
+ bus_speed = PCIX_66MHZ;
+ else if ((slot_num = (slot_avail2 & SLOT_66MHZ)) != 0 )
+ bus_speed = PCI_66MHZ;
+ else if ((slot_num = (slot_avail1 & SLOT_33MHZ)) != 0 )
+ bus_speed = PCI_33MHZ;
+ else bus_speed = PCI_SPEED_UNKNOWN;
+ } else {
+ if ((slot_num = ((slot_avail1 & SLOT_133MHZ_PCIX) >> 23) ) != 0 )
+ bus_speed = PCIX_133MHZ;
+ else if ((slot_num = ((slot_avail1 & SLOT_100MHZ_PCIX) >> 15) ) != 0 )
+ bus_speed = PCIX_100MHZ;
+ else if ((slot_num = ((slot_avail1 & SLOT_66MHZ_PCIX) >> 7) ) != 0 )
+ bus_speed = PCIX_66MHZ;
+ else if ((slot_num = (slot_avail2 & SLOT_66MHZ)) != 0 )
+ bus_speed = PCI_66MHZ;
+ else if ((slot_num = (slot_avail1 & SLOT_33MHZ)) != 0 )
+ bus_speed = PCI_33MHZ;
+ else bus_speed = PCI_SPEED_UNKNOWN;
+ }
+
+ *value = bus_speed;
+ dbg("Max bus speed = %d\n", bus_speed);
+ DBG_LEAVE_ROUTINE
+ return retval;
+}
+
+static int hpc_get_cur_bus_speed (struct slot *slot, enum pci_bus_speed *value)
+{
+ struct php_ctlr_state_s *php_ctlr = (struct php_ctlr_state_s *) slot->ctrl->hpc_ctlr_handle;
+ enum pci_bus_speed bus_speed = PCI_SPEED_UNKNOWN;
+ u16 sec_bus_status;
+ int retval = 0;
+ u8 pi;
+
+ DBG_ENTER_ROUTINE
+
+ if (!slot->ctrl->hpc_ctlr_handle) {
+ err("%s: Invalid HPC controller handle!\n", __FUNCTION__);
+ return -1;
+ }
+
+ if (slot->hp_slot >= php_ctlr->num_slots) {
+ err("%s: Invalid HPC slot number!\n", __FUNCTION__);
+ return -1;
+ }
+
+ pi = readb(php_ctlr->creg + PROG_INTERFACE);
+ sec_bus_status = readw(php_ctlr->creg + SEC_BUS_CONFIG);
+
+ if (pi == 2) {
+ switch (sec_bus_status & 0x000f) {
+ case 0:
+ bus_speed = PCI_SPEED_33MHz;
+ break;
+ case 1:
+ bus_speed = PCI_SPEED_66MHz;
+ break;
+ case 2:
+ bus_speed = PCI_SPEED_66MHz_PCIX;
+ break;
+ case 3:
+ bus_speed = PCI_SPEED_100MHz_PCIX;
+ break;
+ case 4:
+ bus_speed = PCI_SPEED_133MHz_PCIX;
+ break;
+ case 5:
+ bus_speed = PCI_SPEED_66MHz_PCIX_ECC;
+ break;
+ case 6:
+ bus_speed = PCI_SPEED_100MHz_PCIX_ECC;
+ break;
+ case 7:
+ bus_speed = PCI_SPEED_133MHz_PCIX_ECC;
+ break;
+ case 8:
+ bus_speed = PCI_SPEED_66MHz_PCIX_266;
+ break;
+ case 9:
+ bus_speed = PCI_SPEED_100MHz_PCIX_266;
+ break;
+ case 0xa:
+ bus_speed = PCI_SPEED_133MHz_PCIX_266;
+ break;
+ case 0xb:
+ bus_speed = PCI_SPEED_66MHz_PCIX_533;
+ break;
+ case 0xc:
+ bus_speed = PCI_SPEED_100MHz_PCIX_533;
+ break;
+ case 0xd:
+ bus_speed = PCI_SPEED_133MHz_PCIX_533;
+ break;
+ case 0xe:
+ case 0xf:
+ default:
+ bus_speed = PCI_SPEED_UNKNOWN;
+ break;
+ }
+ } else {
+ /* In the case where pi is undefined, default it to 1 */
+ switch (sec_bus_status & 0x0007) {
+ case 0:
+ bus_speed = PCI_SPEED_33MHz;
+ break;
+ case 1:
+ bus_speed = PCI_SPEED_66MHz;
+ break;
+ case 2:
+ bus_speed = PCI_SPEED_66MHz_PCIX;
+ break;
+ case 3:
+ bus_speed = PCI_SPEED_100MHz_PCIX;
+ break;
+ case 4:
+ bus_speed = PCI_SPEED_133MHz_PCIX;
+ break;
+ case 5:
+ bus_speed = PCI_SPEED_UNKNOWN; /* Reserved */
+ break;
+ case 6:
+ bus_speed = PCI_SPEED_UNKNOWN; /* Reserved */
+ break;
+ case 7:
+ bus_speed = PCI_SPEED_UNKNOWN; /* Reserved */
+ break;
+ default:
+ bus_speed = PCI_SPEED_UNKNOWN;
+ break;
+ }
+ }
+
+ *value = bus_speed;
+ dbg("Current bus speed = %d\n", bus_speed);
+ DBG_LEAVE_ROUTINE
+ return retval;
+}
+
+static struct hpc_ops shpchp_hpc_ops = {
+ .power_on_slot = hpc_power_on_slot,
+ .slot_enable = hpc_slot_enable,
+ .slot_disable = hpc_slot_disable,
+ .enable_all_slots = hpc_enable_all_slots,
+ .pwr_on_all_slots = hpc_pwr_on_all_slots,
+ .set_bus_speed_mode = hpc_set_bus_speed_mode,
+ .set_attention_status = hpc_set_attention_status,
+ .get_power_status = hpc_get_power_status,
+ .get_attention_status = hpc_get_attention_status,
+ .get_latch_status = hpc_get_latch_status,
+ .get_adapter_status = hpc_get_adapter_status,
+
+ .get_max_bus_speed = hpc_get_max_bus_speed,
+ .get_cur_bus_speed = hpc_get_cur_bus_speed,
+ .get_adapter_speed = hpc_get_adapter_speed,
+ .get_mode1_ECC_cap = hpc_get_mode1_ECC_cap,
+ .get_prog_int = hpc_get_prog_int,
+
+ .query_power_fault = hpc_query_power_fault,
+ .green_led_on = hpc_set_green_led_on,
+ .green_led_off = hpc_set_green_led_off,
+ .green_led_blink = hpc_set_green_led_blink,
+
+ .release_ctlr = hpc_release_ctlr,
+ .check_cmd_status = hpc_check_cmd_status,
+};
+
+int shpc_init(struct controller * ctrl,
+ struct pci_dev * pdev,
+ php_intr_callback_t attention_button_callback,
+ php_intr_callback_t switch_change_callback,
+ php_intr_callback_t presence_change_callback,
+ php_intr_callback_t power_fault_callback)
+{
+ struct php_ctlr_state_s *php_ctlr, *p;
+ void *instance_id = ctrl;
+ int rc;
+ u8 hp_slot;
+ static int first = 1;
+ u32 shpc_cap_offset, shpc_base_offset;
+ u32 tempdword, slot_reg;
+ u16 vendor_id, device_id;
+ u8 i;
+
+ DBG_ENTER_ROUTINE
+
+ spin_lock_init(&list_lock);
+ php_ctlr = (struct php_ctlr_state_s *) kmalloc(sizeof(struct php_ctlr_state_s), GFP_KERNEL);
+
+ if (!php_ctlr) { /* allocate controller state data */
+ err("%s: HPC controller memory allocation error!\n", __FUNCTION__);
+ goto abort;
+ }
+
+ memset(php_ctlr, 0, sizeof(struct php_ctlr_state_s));
+
+ php_ctlr->pci_dev = pdev; /* save pci_dev in context */
+
+ rc = pci_read_config_word(pdev, PCI_VENDOR_ID, &vendor_id);
+ dbg("%s: Vendor ID: %x\n",__FUNCTION__, vendor_id);
+ if (rc) {
+ err("%s: unable to read PCI configuration data\n", __FUNCTION__);
+ goto abort_free_ctlr;
+ }
+
+ rc = pci_read_config_word(pdev, PCI_DEVICE_ID, &device_id);
+ dbg("%s: Device ID: %x\n",__FUNCTION__, device_id);
+ if (rc) {
+ err("%s: unable to read PCI configuration data\n", __FUNCTION__);
+ goto abort_free_ctlr;
+ }
+
+ if ((vendor_id == PCI_VENDOR_ID_AMD) || (device_id == PCI_DEVICE_ID_AMD_GOLAM_7450)) {
+ shpc_base_offset = 0; /* amd shpc driver doesn't use this; assume 0 */
+ } else {
+ if ((shpc_cap_offset = pci_find_capability(pdev, PCI_CAP_ID_SHPC)) == 0) {
+ err("%s : shpc_cap_offset == 0\n", __FUNCTION__);
+ goto abort_free_ctlr;
+ }
+ dbg("%s: shpc_cap_offset = %x\n", __FUNCTION__, shpc_cap_offset);
+
+ rc = pci_write_config_byte(pdev, (u8)shpc_cap_offset + DWORD_SELECT , BASE_OFFSET);
+ if (rc) {
+ err("%s : pci_word_config_byte failed\n", __FUNCTION__);
+ goto abort_free_ctlr;
+ }
+
+ rc = pci_read_config_dword(pdev, (u8)shpc_cap_offset + DWORD_DATA, &shpc_base_offset);
+ if (rc) {
+ err("%s : pci_read_config_dword failed\n", __FUNCTION__);
+ goto abort_free_ctlr;
+ }
+
+ for (i = 0; i <= 14; i++) {
+ rc = pci_write_config_byte(pdev, (u8)shpc_cap_offset + DWORD_SELECT , i);
+ if (rc) {
+ err("%s : pci_word_config_byte failed\n", __FUNCTION__);
+ goto abort_free_ctlr;
+ }
+
+ rc = pci_read_config_dword(pdev, (u8)shpc_cap_offset + DWORD_DATA, &tempdword);
+ if (rc) {
+ err("%s : pci_read_config_dword failed\n", __FUNCTION__);
+ goto abort_free_ctlr;
+ }
+ dbg("%s: offset %d: tempdword %x\n", __FUNCTION__,i, tempdword);
+ }
+ }
+
+ if (first) {
+ spin_lock_init(&hpc_event_lock);
+ first = 0;
+ }
+
+ dbg("pdev = %p: b:d:f:irq=0x%x:%x:%x:%x\n", pdev, pdev->bus->number, PCI_SLOT(pdev->devfn),
+ PCI_FUNC(pdev->devfn), pdev->irq);
+ for ( rc = 0; rc < DEVICE_COUNT_RESOURCE; rc++)
+ if (pci_resource_len(pdev, rc) > 0)
+ dbg("pci resource[%d] start=0x%lx(len=0x%lx), shpc_base_offset %x\n", rc,
+ pci_resource_start(pdev, rc), pci_resource_len(pdev, rc), shpc_base_offset);
+
+ info("HPC vendor_id %x device_id %x ss_vid %x ss_did %x\n", pdev->vendor, pdev->device, pdev->subsystem_vendor,
+ pdev->subsystem_device);
+
+ if (pci_enable_device(pdev))
+ goto abort_free_ctlr;
+
+ if (!request_mem_region(pci_resource_start(pdev, 0) + shpc_base_offset, pci_resource_len(pdev, 0), MY_NAME)) {
+ err("%s: cannot reserve MMIO region\n", __FUNCTION__);
+ goto abort_free_ctlr;
+ }
+
+ php_ctlr->creg = ioremap(pci_resource_start(pdev, 0) + shpc_base_offset, pci_resource_len(pdev, 0));
+ if (!php_ctlr->creg) {
+ err("%s: cannot remap MMIO region %lx @ %lx\n", __FUNCTION__, pci_resource_len(pdev, 0),
+ pci_resource_start(pdev, 0) + shpc_base_offset);
+ release_mem_region(pci_resource_start(pdev, 0) + shpc_base_offset, pci_resource_len(pdev, 0));
+ goto abort_free_ctlr;
+ }
+ dbg("%s: php_ctlr->creg %p\n", __FUNCTION__, php_ctlr->creg);
+ dbg("%s: physical addr %p\n", __FUNCTION__, (void*)pci_resource_start(pdev, 0));
+
+ init_MUTEX(&ctrl->crit_sect);
+ /* Setup wait queue */
+ init_waitqueue_head(&ctrl->queue);
+
+ /* Find the IRQ */
+ php_ctlr->irq = pdev->irq;
+ dbg("HPC interrupt = %d\n", php_ctlr->irq);
+
+ /* Save interrupt callback info */
+ php_ctlr->attention_button_callback = attention_button_callback;
+ php_ctlr->switch_change_callback = switch_change_callback;
+ php_ctlr->presence_change_callback = presence_change_callback;
+ php_ctlr->power_fault_callback = power_fault_callback;
+ php_ctlr->callback_instance_id = instance_id;
+
+ /* Return PCI Controller Info */
+ php_ctlr->slot_device_offset = (readl(php_ctlr->creg + SLOT_CONFIG) & FIRST_DEV_NUM ) >> 8;
+ php_ctlr->num_slots = readl(php_ctlr->creg + SLOT_CONFIG) & SLOT_NUM;
+ dbg("%s: slot_device_offset %x\n", __FUNCTION__, php_ctlr->slot_device_offset);
+ dbg("%s: num_slots %x\n", __FUNCTION__, php_ctlr->num_slots);
+
+ /* Mask Global Interrupt Mask & Command Complete Interrupt Mask */
+ tempdword = readl(php_ctlr->creg + SERR_INTR_ENABLE);
+ dbg("%s: SERR_INTR_ENABLE = %x\n", __FUNCTION__, tempdword);
+ tempdword = 0x0003000f;
+ writel(tempdword, php_ctlr->creg + SERR_INTR_ENABLE);
+ tempdword = readl(php_ctlr->creg + SERR_INTR_ENABLE);
+ dbg("%s: SERR_INTR_ENABLE = %x\n", __FUNCTION__, tempdword);
+
+ /* Mask the MRL sensor SERR Mask of individual slot in
+ * Slot SERR-INT Mask & clear all the existing event if any
+ */
+ for (hp_slot = 0; hp_slot < php_ctlr->num_slots; hp_slot++) {
+ slot_reg = readl(php_ctlr->creg + SLOT1 + 4*hp_slot );
+ dbg("%s: Default Logical Slot Register %d value %x\n", __FUNCTION__,
+ hp_slot, slot_reg);
+ tempdword = 0xffff3fff;
+ writel(tempdword, php_ctlr->creg + SLOT1 + (4*hp_slot));
+ }
+
+ if (shpchp_poll_mode) {/* Install interrupt polling code */
+ /* Install and start the interrupt polling timer */
+ init_timer(&php_ctlr->int_poll_timer);
+ start_int_poll_timer( php_ctlr, 10 ); /* start with 10 second delay */
+ } else {
+ /* Installs the interrupt handler */
+ rc = pci_enable_msi(pdev);
+ if (rc) {
+ info("Can't get msi for the hotplug controller\n");
+ info("Use INTx for the hotplug controller\n");
+ dbg("%s: rc = %x\n", __FUNCTION__, rc);
+ } else
+ php_ctlr->irq = pdev->irq;
+
+ rc = request_irq(php_ctlr->irq, shpc_isr, SA_SHIRQ, MY_NAME, (void *) ctrl);
+ dbg("%s: request_irq %d for hpc%d (returns %d)\n", __FUNCTION__, php_ctlr->irq, ctlr_seq_num, rc);
+ if (rc) {
+ err("Can't get irq %d for the hotplug controller\n", php_ctlr->irq);
+ goto abort_free_ctlr;
+ }
+ /* Execute OSHP method here */
+ }
+ dbg("%s: Before adding HPC to HPC list\n", __FUNCTION__);
+
+ /* Add this HPC instance into the HPC list */
+ spin_lock(&list_lock);
+ if (php_ctlr_list_head == 0) {
+ php_ctlr_list_head = php_ctlr;
+ p = php_ctlr_list_head;
+ p->pnext = NULL;
+ } else {
+ p = php_ctlr_list_head;
+
+ while (p->pnext)
+ p = p->pnext;
+
+ p->pnext = php_ctlr;
+ }
+ spin_unlock(&list_lock);
+
+
+ ctlr_seq_num++;
+ ctrl->hpc_ctlr_handle = php_ctlr;
+ ctrl->hpc_ops = &shpchp_hpc_ops;
+
+ for (hp_slot = 0; hp_slot < php_ctlr->num_slots; hp_slot++) {
+ slot_reg = readl(php_ctlr->creg + SLOT1 + 4*hp_slot );
+ dbg("%s: Default Logical Slot Register %d value %x\n", __FUNCTION__,
+ hp_slot, slot_reg);
+ tempdword = 0xe01f3fff;
+ writel(tempdword, php_ctlr->creg + SLOT1 + (4*hp_slot));
+ }
+ if (!shpchp_poll_mode) {
+ /* Unmask all general input interrupts and SERR */
+ tempdword = readl(php_ctlr->creg + SERR_INTR_ENABLE);
+ tempdword = 0x0000000a;
+ writel(tempdword, php_ctlr->creg + SERR_INTR_ENABLE);
+ tempdword = readl(php_ctlr->creg + SERR_INTR_ENABLE);
+ dbg("%s: SERR_INTR_ENABLE = %x\n", __FUNCTION__, tempdword);
+ }
+
+ dbg("%s: Leaving shpc_init\n", __FUNCTION__);
+ DBG_LEAVE_ROUTINE
+ return 0;
+
+ /* We end up here for the many possible ways to fail this API. */
+abort_free_ctlr:
+ kfree(php_ctlr);
+abort:
+ DBG_LEAVE_ROUTINE
+ return -1;
+}