diff --git a/drivers/s390/char/Makefile b/drivers/s390/char/Makefile
new file mode 100644
index 0000000..14e8cce
--- /dev/null
+++ b/drivers/s390/char/Makefile
@@ -0,0 +1,28 @@
+#
+# S/390 character devices
+#
+
+obj-y += ctrlchar.o keyboard.o defkeymap.o
+
+obj-$(CONFIG_TN3270) += raw3270.o
+obj-$(CONFIG_TN3270_CONSOLE) += con3270.o
+obj-$(CONFIG_TN3270_TTY) += tty3270.o
+obj-$(CONFIG_TN3270_FS) += fs3270.o
+
+obj-$(CONFIG_TN3215) += con3215.o
+
+obj-$(CONFIG_SCLP) += sclp.o sclp_rw.o sclp_quiesce.o
+obj-$(CONFIG_SCLP_TTY) += sclp_tty.o
+obj-$(CONFIG_SCLP_CONSOLE) += sclp_con.o
+obj-$(CONFIG_SCLP_VT220_TTY) += sclp_vt220.o
+obj-$(CONFIG_SCLP_CPI) += sclp_cpi.o
+
+obj-$(CONFIG_ZVM_WATCHDOG) += vmwatchdog.o
+obj-$(CONFIG_VMLOGRDR) += vmlogrdr.o
+
+tape-$(CONFIG_S390_TAPE_BLOCK) += tape_block.o
+tape-$(CONFIG_PROC_FS) += tape_proc.o
+tape-objs := tape_core.o tape_std.o tape_char.o $(tape-y)
+obj-$(CONFIG_S390_TAPE) += tape.o tape_class.o
+obj-$(CONFIG_S390_TAPE_34XX) += tape_34xx.o
+obj-$(CONFIG_MONREADER) += monreader.o
diff --git a/drivers/s390/char/con3215.c b/drivers/s390/char/con3215.c
new file mode 100644
index 0000000..022f17b
--- /dev/null
+++ b/drivers/s390/char/con3215.c
@@ -0,0 +1,1192 @@
+/*
+ *  drivers/s390/char/con3215.c
+ *    3215 line mode terminal driver.
+ *
+ *  S390 version
+ *    Copyright (C) 1999,2000 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *    Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com),
+ *
+ *  Updated:
+ *   Aug-2000: Added tab support
+ *	       Dan Morrison, IBM Corporation (dmorriso@cse.buffalo.edu)
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kdev_t.h>
+#include <linux/tty.h>
+#include <linux/vt_kern.h>
+#include <linux/init.h>
+#include <linux/console.h>
+#include <linux/interrupt.h>
+
+#include <linux/slab.h>
+#include <linux/bootmem.h>
+
+#include <asm/ccwdev.h>
+#include <asm/cio.h>
+#include <asm/io.h>
+#include <asm/ebcdic.h>
+#include <asm/uaccess.h>
+#include <asm/delay.h>
+#include <asm/cpcmd.h>
+#include <asm/setup.h>
+
+#include "ctrlchar.h"
+
+#define NR_3215		    1
+#define NR_3215_REQ	    (4*NR_3215)
+#define RAW3215_BUFFER_SIZE 65536     /* output buffer size */
+#define RAW3215_INBUF_SIZE  256	      /* input buffer size */
+#define RAW3215_MIN_SPACE   128	      /* minimum free space for wakeup */
+#define RAW3215_MIN_WRITE   1024      /* min. length for immediate output */
+#define RAW3215_MAX_BYTES   3968      /* max. bytes to write with one ssch */
+#define RAW3215_MAX_NEWLINE 50	      /* max. lines to write with one ssch */
+#define RAW3215_NR_CCWS	    3
+#define RAW3215_TIMEOUT	    HZ/10     /* time for delayed output */
+
+#define RAW3215_FIXED	    1	      /* 3215 console device is not be freed */
+#define RAW3215_ACTIVE	    2	      /* set if the device is in use */
+#define RAW3215_WORKING	    4	      /* set if a request is being worked on */
+#define RAW3215_THROTTLED   8	      /* set if reading is disabled */
+#define RAW3215_STOPPED	    16	      /* set if writing is disabled */
+#define RAW3215_CLOSING	    32	      /* set while in close process */
+#define RAW3215_TIMER_RUNS  64	      /* set if the output delay timer is on */
+#define RAW3215_FLUSHING    128	      /* set to flush buffer (no delay) */
+
+#define TAB_STOP_SIZE	    8	      /* tab stop size */
+
+/*
+ * Request types for a 3215 device
+ */
+enum raw3215_type {
+	RAW3215_FREE, RAW3215_READ, RAW3215_WRITE
+};
+
+/*
+ * Request structure for a 3215 device
+ */
+struct raw3215_req {
+	enum raw3215_type type;	      /* type of the request */
+	int start, len;		      /* start index & len in output buffer */
+	int delayable;		      /* indication to wait for more data */
+	int residual;		      /* residual count for read request */
+	struct ccw1 ccws[RAW3215_NR_CCWS]; /* space for the channel program */
+	struct raw3215_info *info;    /* pointer to main structure */
+	struct raw3215_req *next;     /* pointer to next request */
+} __attribute__ ((aligned(8)));
+
+struct raw3215_info {
+	struct ccw_device *cdev;      /* device for tty driver */
+	spinlock_t *lock;	      /* pointer to irq lock */
+	int flags;		      /* state flags */
+	char *buffer;		      /* pointer to output buffer */
+	char *inbuf;		      /* pointer to input buffer */
+	int head;		      /* first free byte in output buffer */
+	int count;		      /* number of bytes in output buffer */
+	int written;		      /* number of bytes in write requests */
+	struct tty_struct *tty;	      /* pointer to tty structure if present */
+	struct tasklet_struct tasklet;
+	struct raw3215_req *queued_read; /* pointer to queued read requests */
+	struct raw3215_req *queued_write;/* pointer to queued write requests */
+	wait_queue_head_t empty_wait; /* wait queue for flushing */
+	struct timer_list timer;      /* timer for delayed output */
+	char *message;		      /* pending message from raw3215_irq */
+	int msg_dstat;		      /* dstat for pending message */
+	int msg_cstat;		      /* cstat for pending message */
+	int line_pos;		      /* position on the line (for tabs) */
+	char ubuffer[80];	      /* copy_from_user buffer */
+};
+
+/* array of 3215 devices structures */
+static struct raw3215_info *raw3215[NR_3215];
+/* spinlock to protect the raw3215 array */
+static DEFINE_SPINLOCK(raw3215_device_lock);
+/* list of free request structures */
+static struct raw3215_req *raw3215_freelist;
+/* spinlock to protect free list */
+static spinlock_t raw3215_freelist_lock;
+
+static struct tty_driver *tty3215_driver;
+
+/*
+ * Get a request structure from the free list
+ */
+static inline struct raw3215_req *
+raw3215_alloc_req(void) {
+	struct raw3215_req *req;
+	unsigned long flags;
+
+	spin_lock_irqsave(&raw3215_freelist_lock, flags);
+	req = raw3215_freelist;
+	raw3215_freelist = req->next;
+	spin_unlock_irqrestore(&raw3215_freelist_lock, flags);
+	return req;
+}
+
+/*
+ * Put a request structure back to the free list
+ */
+static inline void
+raw3215_free_req(struct raw3215_req *req) {
+	unsigned long flags;
+
+	if (req->type == RAW3215_FREE)
+		return;		/* don't free a free request */
+	req->type = RAW3215_FREE;
+	spin_lock_irqsave(&raw3215_freelist_lock, flags);
+	req->next = raw3215_freelist;
+	raw3215_freelist = req;
+	spin_unlock_irqrestore(&raw3215_freelist_lock, flags);
+}
+
+/*
+ * Set up a read request that reads up to 160 byte from the 3215 device.
+ * If there is a queued read request it is used, but that shouldn't happen
+ * because a 3215 terminal won't accept a new read before the old one is
+ * completed.
+ */
+static void
+raw3215_mk_read_req(struct raw3215_info *raw)
+{
+	struct raw3215_req *req;
+	struct ccw1 *ccw;
+
+	/* there can only be ONE read request at a time */
+	req = raw->queued_read;
+	if (req == NULL) {
+		/* no queued read request, use new req structure */
+		req = raw3215_alloc_req();
+		req->type = RAW3215_READ;
+		req->info = raw;
+		raw->queued_read = req;
+	}
+
+	ccw = req->ccws;
+	ccw->cmd_code = 0x0A; /* read inquiry */
+	ccw->flags = 0x20;    /* ignore incorrect length */
+	ccw->count = 160;
+	ccw->cda = (__u32) __pa(raw->inbuf);
+}
+
+/*
+ * Set up a write request with the information from the main structure.
+ * A ccw chain is created that writes as much as possible from the output
+ * buffer to the 3215 device. If a queued write exists it is replaced by
+ * the new, probably lengthened request.
+ */
+static void
+raw3215_mk_write_req(struct raw3215_info *raw)
+{
+	struct raw3215_req *req;
+	struct ccw1 *ccw;
+	int len, count, ix, lines;
+
+	if (raw->count <= raw->written)
+		return;
+	/* check if there is a queued write request */
+	req = raw->queued_write;
+	if (req == NULL) {
+		/* no queued write request, use new req structure */
+		req = raw3215_alloc_req();
+		req->type = RAW3215_WRITE;
+		req->info = raw;
+		raw->queued_write = req;
+	} else {
+		raw->written -= req->len;
+	}
+
+	ccw = req->ccws;
+	req->start = (raw->head - raw->count + raw->written) &
+		     (RAW3215_BUFFER_SIZE - 1);
+	/*
+	 * now we have to count newlines. We can at max accept
+	 * RAW3215_MAX_NEWLINE newlines in a single ssch due to
+	 * a restriction in VM
+	 */
+	lines = 0;
+	ix = req->start;
+	while (lines < RAW3215_MAX_NEWLINE && ix != raw->head) {
+		if (raw->buffer[ix] == 0x15)
+			lines++;
+		ix = (ix + 1) & (RAW3215_BUFFER_SIZE - 1);
+	}
+	len = ((ix - 1 - req->start) & (RAW3215_BUFFER_SIZE - 1)) + 1;
+	if (len > RAW3215_MAX_BYTES)
+		len = RAW3215_MAX_BYTES;
+	req->len = len;
+	raw->written += len;
+
+	/* set the indication if we should try to enlarge this request */
+	req->delayable = (ix == raw->head) && (len < RAW3215_MIN_WRITE);
+
+	ix = req->start;
+	while (len > 0) {
+		if (ccw > req->ccws)
+			ccw[-1].flags |= 0x40; /* use command chaining */
+		ccw->cmd_code = 0x01; /* write, auto carrier return */
+		ccw->flags = 0x20;    /* ignore incorrect length ind.  */
+		ccw->cda =
+			(__u32) __pa(raw->buffer + ix);
+		count = len;
+		if (ix + count > RAW3215_BUFFER_SIZE)
+			count = RAW3215_BUFFER_SIZE - ix;
+		ccw->count = count;
+		len -= count;
+		ix = (ix + count) & (RAW3215_BUFFER_SIZE - 1);
+		ccw++;
+	}
+	/*
+	 * Add a NOP to the channel program. 3215 devices are purely
+	 * emulated and its much better to avoid the channel end
+	 * interrupt in this case.
+	 */
+	if (ccw > req->ccws)
+		ccw[-1].flags |= 0x40; /* use command chaining */
+	ccw->cmd_code = 0x03; /* NOP */
+	ccw->flags = 0;
+	ccw->cda = 0;
+	ccw->count = 1;
+}
+
+/*
+ * Start a read or a write request
+ */
+static void
+raw3215_start_io(struct raw3215_info *raw)
+{
+	struct raw3215_req *req;
+	int res;
+
+	req = raw->queued_read;
+	if (req != NULL &&
+	    !(raw->flags & (RAW3215_WORKING | RAW3215_THROTTLED))) {
+		/* dequeue request */
+		raw->queued_read = NULL;
+		res = ccw_device_start(raw->cdev, req->ccws,
+				       (unsigned long) req, 0, 0);
+		if (res != 0) {
+			/* do_IO failed, put request back to queue */
+			raw->queued_read = req;
+		} else {
+			raw->flags |= RAW3215_WORKING;
+		}
+	}
+	req = raw->queued_write;
+	if (req != NULL &&
+	    !(raw->flags & (RAW3215_WORKING | RAW3215_STOPPED))) {
+		/* dequeue request */
+		raw->queued_write = NULL;
+		res = ccw_device_start(raw->cdev, req->ccws,
+				       (unsigned long) req, 0, 0);
+		if (res != 0) {
+			/* do_IO failed, put request back to queue */
+			raw->queued_write = req;
+		} else {
+			raw->flags |= RAW3215_WORKING;
+		}
+	}
+}
+
+/*
+ * Function to start a delayed output after RAW3215_TIMEOUT seconds
+ */
+static void
+raw3215_timeout(unsigned long __data)
+{
+	struct raw3215_info *raw = (struct raw3215_info *) __data;
+	unsigned long flags;
+
+	spin_lock_irqsave(raw->lock, flags);
+	if (raw->flags & RAW3215_TIMER_RUNS) {
+		del_timer(&raw->timer);
+		raw->flags &= ~RAW3215_TIMER_RUNS;
+		raw3215_mk_write_req(raw);
+		raw3215_start_io(raw);
+	}
+	spin_unlock_irqrestore(raw->lock, flags);
+}
+
+/*
+ * Function to conditionally start an IO. A read is started immediately,
+ * a write is only started immediately if the flush flag is on or the
+ * amount of data is bigger than RAW3215_MIN_WRITE. If a write is not
+ * done immediately a timer is started with a delay of RAW3215_TIMEOUT.
+ */
+static inline void
+raw3215_try_io(struct raw3215_info *raw)
+{
+	if (!(raw->flags & RAW3215_ACTIVE))
+		return;
+	if (raw->queued_read != NULL)
+		raw3215_start_io(raw);
+	else if (raw->queued_write != NULL) {
+		if ((raw->queued_write->delayable == 0) ||
+		    (raw->flags & RAW3215_FLUSHING)) {
+			/* execute write requests bigger than minimum size */
+			raw3215_start_io(raw);
+			if (raw->flags & RAW3215_TIMER_RUNS) {
+				del_timer(&raw->timer);
+				raw->flags &= ~RAW3215_TIMER_RUNS;
+			}
+		} else if (!(raw->flags & RAW3215_TIMER_RUNS)) {
+			/* delay small writes */
+			init_timer(&raw->timer);
+			raw->timer.expires = RAW3215_TIMEOUT + jiffies;
+			raw->timer.data = (unsigned long) raw;
+			raw->timer.function = raw3215_timeout;
+			add_timer(&raw->timer);
+			raw->flags |= RAW3215_TIMER_RUNS;
+		}
+	}
+}
+
+/*
+ * The bottom half handler routine for 3215 devices. It tries to start
+ * the next IO and wakes up processes waiting on the tty.
+ */
+static void
+raw3215_tasklet(void *data)
+{
+	struct raw3215_info *raw;
+	struct tty_struct *tty;
+	unsigned long flags;
+
+	raw = (struct raw3215_info *) data;
+	spin_lock_irqsave(raw->lock, flags);
+	raw3215_mk_write_req(raw);
+	raw3215_try_io(raw);
+	spin_unlock_irqrestore(raw->lock, flags);
+	/* Check for pending message from raw3215_irq */
+	if (raw->message != NULL) {
+		printk(raw->message, raw->msg_dstat, raw->msg_cstat);
+		raw->message = NULL;
+	}
+	tty = raw->tty;
+	if (tty != NULL &&
+	    RAW3215_BUFFER_SIZE - raw->count >= RAW3215_MIN_SPACE) {
+	    	tty_wakeup(tty);
+	}
+}
+
+/*
+ * Interrupt routine, called from common io layer
+ */
+static void
+raw3215_irq(struct ccw_device *cdev, unsigned long intparm, struct irb *irb)
+{
+	struct raw3215_info *raw;
+	struct raw3215_req *req;
+	struct tty_struct *tty;
+	int cstat, dstat;
+	int count, slen;
+
+	raw = cdev->dev.driver_data;
+	req = (struct raw3215_req *) intparm;
+	cstat = irb->scsw.cstat;
+	dstat = irb->scsw.dstat;
+	if (cstat != 0) {
+		raw->message = KERN_WARNING
+			"Got nonzero channel status in raw3215_irq "
+			"(dev sts 0x%2x, sch sts 0x%2x)";
+		raw->msg_dstat = dstat;
+		raw->msg_cstat = cstat;
+		tasklet_schedule(&raw->tasklet);
+	}
+	if (dstat & 0x01) { /* we got a unit exception */
+		dstat &= ~0x01;	 /* we can ignore it */
+	}
+	switch (dstat) {
+	case 0x80:
+		if (cstat != 0)
+			break;
+		/* Attention interrupt, someone hit the enter key */
+		raw3215_mk_read_req(raw);
+		if (MACHINE_IS_P390)
+			memset(raw->inbuf, 0, RAW3215_INBUF_SIZE);
+		tasklet_schedule(&raw->tasklet);
+		break;
+	case 0x08:
+	case 0x0C:
+		/* Channel end interrupt. */
+		if ((raw = req->info) == NULL)
+			return;		     /* That shouldn't happen ... */
+		if (req->type == RAW3215_READ) {
+			/* store residual count, then wait for device end */
+			req->residual = irb->scsw.count;
+		}
+		if (dstat == 0x08)
+			break;
+	case 0x04:
+		/* Device end interrupt. */
+		if ((raw = req->info) == NULL)
+			return;		     /* That shouldn't happen ... */
+		if (req->type == RAW3215_READ && raw->tty != NULL) {
+			unsigned int cchar;
+
+			tty = raw->tty;
+			count = 160 - req->residual;
+			if (MACHINE_IS_P390) {
+				slen = strnlen(raw->inbuf, RAW3215_INBUF_SIZE);
+				if (count > slen)
+					count = slen;
+			} else
+			if (count >= TTY_FLIPBUF_SIZE - tty->flip.count)
+				count = TTY_FLIPBUF_SIZE - tty->flip.count - 1;
+			EBCASC(raw->inbuf, count);
+			cchar = ctrlchar_handle(raw->inbuf, count, tty);
+			switch (cchar & CTRLCHAR_MASK) {
+			case CTRLCHAR_SYSRQ:
+				break;
+
+			case CTRLCHAR_CTRL:
+				tty->flip.count++;
+				*tty->flip.flag_buf_ptr++ = TTY_NORMAL;
+				*tty->flip.char_buf_ptr++ = cchar;
+				tty_flip_buffer_push(raw->tty);
+				break;
+
+			case CTRLCHAR_NONE:
+				memcpy(tty->flip.char_buf_ptr,
+				       raw->inbuf, count);
+				if (count < 2 ||
+				    (strncmp(raw->inbuf+count-2, "^n", 2) &&
+				    strncmp(raw->inbuf+count-2, "\252n", 2)) ) {
+					/* don't add the auto \n */
+					tty->flip.char_buf_ptr[count] = '\n';
+					memset(tty->flip.flag_buf_ptr,
+					       TTY_NORMAL, count + 1);
+					count++;
+				} else
+					count-=2;
+				tty->flip.char_buf_ptr += count;
+				tty->flip.flag_buf_ptr += count;
+				tty->flip.count += count;
+				tty_flip_buffer_push(raw->tty);
+				break;
+			}
+		} else if (req->type == RAW3215_WRITE) {
+			raw->count -= req->len;
+			raw->written -= req->len;
+		}
+		raw->flags &= ~RAW3215_WORKING;
+		raw3215_free_req(req);
+		/* check for empty wait */
+		if (waitqueue_active(&raw->empty_wait) &&
+		    raw->queued_write == NULL &&
+		    raw->queued_read == NULL) {
+			wake_up_interruptible(&raw->empty_wait);
+		}
+		tasklet_schedule(&raw->tasklet);
+		break;
+	default:
+		/* Strange interrupt, I'll do my best to clean up */
+		if (req != NULL && req->type != RAW3215_FREE) {
+			if (req->type == RAW3215_WRITE) {
+				raw->count -= req->len;
+				raw->written -= req->len;
+			}
+			raw->flags &= ~RAW3215_WORKING;
+			raw3215_free_req(req);
+		}
+		raw->message = KERN_WARNING
+			"Spurious interrupt in in raw3215_irq "
+			"(dev sts 0x%2x, sch sts 0x%2x)";
+		raw->msg_dstat = dstat;
+		raw->msg_cstat = cstat;
+		tasklet_schedule(&raw->tasklet);
+	}
+	return;
+}
+
+/*
+ * Wait until length bytes are available int the output buffer.
+ * Has to be called with the s390irq lock held. Can be called
+ * disabled.
+ */
+static void
+raw3215_make_room(struct raw3215_info *raw, unsigned int length)
+{
+	while (RAW3215_BUFFER_SIZE - raw->count < length) {
+		/* there might be a request pending */
+		raw->flags |= RAW3215_FLUSHING;
+		raw3215_mk_write_req(raw);
+		raw3215_try_io(raw);
+		raw->flags &= ~RAW3215_FLUSHING;
+#ifdef CONFIG_TN3215_CONSOLE
+		wait_cons_dev();
+#endif
+		/* Enough room freed up ? */
+		if (RAW3215_BUFFER_SIZE - raw->count >= length)
+			break;
+		/* there might be another cpu waiting for the lock */
+		spin_unlock(raw->lock);
+		udelay(100);
+		spin_lock(raw->lock);
+	}
+}
+
+/*
+ * String write routine for 3215 devices
+ */
+static void
+raw3215_write(struct raw3215_info *raw, const char *str, unsigned int length)
+{
+	unsigned long flags;
+	int c, count;
+
+	while (length > 0) {
+		spin_lock_irqsave(raw->lock, flags);
+		count = (length > RAW3215_BUFFER_SIZE) ?
+					     RAW3215_BUFFER_SIZE : length;
+		length -= count;
+
+		raw3215_make_room(raw, count);
+
+		/* copy string to output buffer and convert it to EBCDIC */
+		while (1) {
+			c = min_t(int, count,
+				  min(RAW3215_BUFFER_SIZE - raw->count,
+				      RAW3215_BUFFER_SIZE - raw->head));
+			if (c <= 0)
+				break;
+			memcpy(raw->buffer + raw->head, str, c);
+			ASCEBC(raw->buffer + raw->head, c);
+			raw->head = (raw->head + c) & (RAW3215_BUFFER_SIZE - 1);
+			raw->count += c;
+			raw->line_pos += c;
+			str += c;
+			count -= c;
+		}
+		if (!(raw->flags & RAW3215_WORKING)) {
+			raw3215_mk_write_req(raw);
+			/* start or queue request */
+			raw3215_try_io(raw);
+		}
+		spin_unlock_irqrestore(raw->lock, flags);
+	}
+}
+
+/*
+ * Put character routine for 3215 devices
+ */
+static void
+raw3215_putchar(struct raw3215_info *raw, unsigned char ch)
+{
+	unsigned long flags;
+	unsigned int length, i;
+
+	spin_lock_irqsave(raw->lock, flags);
+	if (ch == '\t') {
+		length = TAB_STOP_SIZE - (raw->line_pos%TAB_STOP_SIZE);
+		raw->line_pos += length;
+		ch = ' ';
+	} else if (ch == '\n') {
+		length = 1;
+		raw->line_pos = 0;
+	} else {
+		length = 1;
+		raw->line_pos++;
+	}
+	raw3215_make_room(raw, length);
+
+	for (i = 0; i < length; i++) {
+		raw->buffer[raw->head] = (char) _ascebc[(int) ch];
+		raw->head = (raw->head + 1) & (RAW3215_BUFFER_SIZE - 1);
+		raw->count++;
+	}
+	if (!(raw->flags & RAW3215_WORKING)) {
+		raw3215_mk_write_req(raw);
+		/* start or queue request */
+		raw3215_try_io(raw);
+	}
+	spin_unlock_irqrestore(raw->lock, flags);
+}
+
+/*
+ * Flush routine, it simply sets the flush flag and tries to start
+ * pending IO.
+ */
+static void
+raw3215_flush_buffer(struct raw3215_info *raw)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(raw->lock, flags);
+	if (raw->count > 0) {
+		raw->flags |= RAW3215_FLUSHING;
+		raw3215_try_io(raw);
+		raw->flags &= ~RAW3215_FLUSHING;
+	}
+	spin_unlock_irqrestore(raw->lock, flags);
+}
+
+/*
+ * Fire up a 3215 device.
+ */
+static int
+raw3215_startup(struct raw3215_info *raw)
+{
+	unsigned long flags;
+
+	if (raw->flags & RAW3215_ACTIVE)
+		return 0;
+	raw->line_pos = 0;
+	raw->flags |= RAW3215_ACTIVE;
+	spin_lock_irqsave(raw->lock, flags);
+	raw3215_try_io(raw);
+	spin_unlock_irqrestore(raw->lock, flags);
+
+	return 0;
+}
+
+/*
+ * Shutdown a 3215 device.
+ */
+static void
+raw3215_shutdown(struct raw3215_info *raw)
+{
+	DECLARE_WAITQUEUE(wait, current);
+	unsigned long flags;
+
+	if (!(raw->flags & RAW3215_ACTIVE) || (raw->flags & RAW3215_FIXED))
+		return;
+	/* Wait for outstanding requests, then free irq */
+	spin_lock_irqsave(raw->lock, flags);
+	if ((raw->flags & RAW3215_WORKING) ||
+	    raw->queued_write != NULL ||
+	    raw->queued_read != NULL) {
+		raw->flags |= RAW3215_CLOSING;
+		add_wait_queue(&raw->empty_wait, &wait);
+		set_current_state(TASK_INTERRUPTIBLE);
+		spin_unlock_irqrestore(raw->lock, flags);
+		schedule();
+		spin_lock_irqsave(raw->lock, flags);
+		remove_wait_queue(&raw->empty_wait, &wait);
+		set_current_state(TASK_RUNNING);
+		raw->flags &= ~(RAW3215_ACTIVE | RAW3215_CLOSING);
+	}
+	spin_unlock_irqrestore(raw->lock, flags);
+}
+
+static int
+raw3215_probe (struct ccw_device *cdev)
+{
+	struct raw3215_info *raw;
+	int line;
+
+	raw = kmalloc(sizeof(struct raw3215_info) +
+		      RAW3215_INBUF_SIZE, GFP_KERNEL|GFP_DMA);
+	if (raw == NULL)
+		return -ENOMEM;
+
+	spin_lock(&raw3215_device_lock);
+	for (line = 0; line < NR_3215; line++) {
+		if (!raw3215[line]) {
+			raw3215[line] = raw;
+			break;
+		}
+	}
+	spin_unlock(&raw3215_device_lock);
+	if (line == NR_3215) {
+		kfree(raw);
+		return -ENODEV;
+	}
+
+	raw->cdev = cdev;
+	raw->lock = get_ccwdev_lock(cdev);
+	raw->inbuf = (char *) raw + sizeof(struct raw3215_info);
+	memset(raw, 0, sizeof(struct raw3215_info));
+	raw->buffer = (char *) kmalloc(RAW3215_BUFFER_SIZE,
+				       GFP_KERNEL|GFP_DMA);
+	if (raw->buffer == NULL) {
+		spin_lock(&raw3215_device_lock);
+		raw3215[line] = 0;
+		spin_unlock(&raw3215_device_lock);
+		kfree(raw);
+		return -ENOMEM;
+	}
+	tasklet_init(&raw->tasklet,
+		     (void (*)(unsigned long)) raw3215_tasklet,
+		     (unsigned long) raw);
+	init_waitqueue_head(&raw->empty_wait);
+
+	cdev->dev.driver_data = raw;
+	cdev->handler = raw3215_irq;
+
+	return 0;
+}
+
+static void
+raw3215_remove (struct ccw_device *cdev)
+{
+	struct raw3215_info *raw;
+
+	ccw_device_set_offline(cdev);
+	raw = cdev->dev.driver_data;
+	if (raw) {
+		cdev->dev.driver_data = NULL;
+		if (raw->buffer)
+			kfree(raw->buffer);
+		kfree(raw);
+	}
+}
+
+static int
+raw3215_set_online (struct ccw_device *cdev)
+{
+	struct raw3215_info *raw;
+
+	raw = cdev->dev.driver_data;
+	if (!raw)
+		return -ENODEV;
+
+	return raw3215_startup(raw);
+}
+
+static int
+raw3215_set_offline (struct ccw_device *cdev)
+{
+	struct raw3215_info *raw;
+
+	raw = cdev->dev.driver_data;
+	if (!raw)
+		return -ENODEV;
+
+	raw3215_shutdown(raw);
+
+	return 0;
+}
+
+static struct ccw_device_id raw3215_id[] = {
+	{ CCW_DEVICE(0x3215, 0) },
+	{ /* end of list */ },
+};
+
+static struct ccw_driver raw3215_ccw_driver = {
+	.name		= "3215",
+	.owner		= THIS_MODULE,
+	.ids		= raw3215_id,
+	.probe		= &raw3215_probe,
+	.remove		= &raw3215_remove,
+	.set_online	= &raw3215_set_online,
+	.set_offline	= &raw3215_set_offline,
+};
+
+#ifdef CONFIG_TN3215_CONSOLE
+/*
+ * Write a string to the 3215 console
+ */
+static void
+con3215_write(struct console *co, const char *str, unsigned int count)
+{
+	struct raw3215_info *raw;
+	int i;
+
+	if (count <= 0)
+		return;
+	raw = raw3215[0];	/* console 3215 is the first one */
+	while (count > 0) {
+		for (i = 0; i < count; i++)
+			if (str[i] == '\t' || str[i] == '\n')
+				break;
+		raw3215_write(raw, str, i);
+		count -= i;
+		str += i;
+		if (count > 0) {
+			raw3215_putchar(raw, *str);
+			count--;
+			str++;
+		}
+	}
+}
+
+static struct tty_driver *con3215_device(struct console *c, int *index)
+{
+	*index = c->index;
+	return tty3215_driver;
+}
+
+/*
+ * panic() calls console_unblank before the system enters a
+ * disabled, endless loop.
+ */
+static void
+con3215_unblank(void)
+{
+	struct raw3215_info *raw;
+	unsigned long flags;
+
+	raw = raw3215[0];  /* console 3215 is the first one */
+	spin_lock_irqsave(raw->lock, flags);
+	raw3215_make_room(raw, RAW3215_BUFFER_SIZE);
+	spin_unlock_irqrestore(raw->lock, flags);
+}
+
+static int __init 
+con3215_consetup(struct console *co, char *options)
+{
+	return 0;
+}
+
+/*
+ *  The console structure for the 3215 console
+ */
+static struct console con3215 = {
+	.name	 = "ttyS",
+	.write	 = con3215_write,
+	.device	 = con3215_device,
+	.unblank = con3215_unblank,
+	.setup	 = con3215_consetup,
+	.flags	 = CON_PRINTBUFFER,
+};
+
+/*
+ * 3215 console initialization code called from console_init().
+ * NOTE: This is called before kmalloc is available.
+ */
+static int __init
+con3215_init(void)
+{
+	struct ccw_device *cdev;
+	struct raw3215_info *raw;
+	struct raw3215_req *req;
+	int i;
+
+	/* Check if 3215 is to be the console */
+	if (!CONSOLE_IS_3215)
+		return -ENODEV;
+
+	/* Set the console mode for VM */
+	if (MACHINE_IS_VM) {
+		cpcmd("TERM CONMODE 3215", NULL, 0);
+		cpcmd("TERM AUTOCR OFF", NULL, 0);
+	}
+
+	/* allocate 3215 request structures */
+	raw3215_freelist = NULL;
+	spin_lock_init(&raw3215_freelist_lock);
+	for (i = 0; i < NR_3215_REQ; i++) {
+		req = (struct raw3215_req *) alloc_bootmem_low(sizeof(struct raw3215_req));
+		req->next = raw3215_freelist;
+		raw3215_freelist = req;
+	}
+
+	cdev = ccw_device_probe_console();
+	if (!cdev)
+		return -ENODEV;
+
+	raw3215[0] = raw = (struct raw3215_info *)
+		alloc_bootmem_low(sizeof(struct raw3215_info));
+	memset(raw, 0, sizeof(struct raw3215_info));
+	raw->buffer = (char *) alloc_bootmem_low(RAW3215_BUFFER_SIZE);
+	raw->inbuf = (char *) alloc_bootmem_low(RAW3215_INBUF_SIZE);
+	raw->cdev = cdev;
+	raw->lock = get_ccwdev_lock(cdev);
+	cdev->dev.driver_data = raw;
+	cdev->handler = raw3215_irq;
+
+	raw->flags |= RAW3215_FIXED;
+	tasklet_init(&raw->tasklet,
+		     (void (*)(unsigned long)) raw3215_tasklet,
+		     (unsigned long) raw);
+	init_waitqueue_head(&raw->empty_wait);
+
+	/* Request the console irq */
+	if (raw3215_startup(raw) != 0) {
+		free_bootmem((unsigned long) raw->inbuf, RAW3215_INBUF_SIZE);
+		free_bootmem((unsigned long) raw->buffer, RAW3215_BUFFER_SIZE);
+		free_bootmem((unsigned long) raw, sizeof(struct raw3215_info));
+		raw3215[0] = NULL;
+		printk("Couldn't find a 3215 console device\n");
+		return -ENODEV;
+	}
+	register_console(&con3215);
+	return 0;
+}
+console_initcall(con3215_init);
+#endif
+
+/*
+ * tty3215_open
+ *
+ * This routine is called whenever a 3215 tty is opened.
+ */
+static int
+tty3215_open(struct tty_struct *tty, struct file * filp)
+{
+	struct raw3215_info *raw;
+	int retval, line;
+
+	line = tty->index;
+	if ((line < 0) || (line >= NR_3215))
+		return -ENODEV;
+
+	raw = raw3215[line];
+	if (raw == NULL)
+		return -ENODEV;
+
+	tty->driver_data = raw;
+	raw->tty = tty;
+
+	tty->low_latency = 0;  /* don't use bottom half for pushing chars */
+	/*
+	 * Start up 3215 device
+	 */
+	retval = raw3215_startup(raw);
+	if (retval)
+		return retval;
+
+	return 0;
+}
+
+/*
+ * tty3215_close()
+ *
+ * This routine is called when the 3215 tty is closed. We wait
+ * for the remaining request to be completed. Then we clean up.
+ */
+static void
+tty3215_close(struct tty_struct *tty, struct file * filp)
+{
+	struct raw3215_info *raw;
+
+	raw = (struct raw3215_info *) tty->driver_data;
+	if (raw == NULL || tty->count > 1)
+		return;
+	tty->closing = 1;
+	/* Shutdown the terminal */
+	raw3215_shutdown(raw);
+	tty->closing = 0;
+	raw->tty = NULL;
+}
+
+/*
+ * Returns the amount of free space in the output buffer.
+ */
+static int
+tty3215_write_room(struct tty_struct *tty)
+{
+	struct raw3215_info *raw;
+
+	raw = (struct raw3215_info *) tty->driver_data;
+
+	/* Subtract TAB_STOP_SIZE to allow for a tab, 8 <<< 64K */
+	if ((RAW3215_BUFFER_SIZE - raw->count - TAB_STOP_SIZE) >= 0)
+		return RAW3215_BUFFER_SIZE - raw->count - TAB_STOP_SIZE;
+	else
+		return 0;
+}
+
+/*
+ * String write routine for 3215 ttys
+ */
+static int
+tty3215_write(struct tty_struct * tty,
+	      const unsigned char *buf, int count)
+{
+	struct raw3215_info *raw;
+
+	if (!tty)
+		return 0;
+	raw = (struct raw3215_info *) tty->driver_data;
+	raw3215_write(raw, buf, count);
+	return count;
+}
+
+/*
+ * Put character routine for 3215 ttys
+ */
+static void
+tty3215_put_char(struct tty_struct *tty, unsigned char ch)
+{
+	struct raw3215_info *raw;
+
+	if (!tty)
+		return;
+	raw = (struct raw3215_info *) tty->driver_data;
+	raw3215_putchar(raw, ch);
+}
+
+static void
+tty3215_flush_chars(struct tty_struct *tty)
+{
+}
+
+/*
+ * Returns the number of characters in the output buffer
+ */
+static int
+tty3215_chars_in_buffer(struct tty_struct *tty)
+{
+	struct raw3215_info *raw;
+
+	raw = (struct raw3215_info *) tty->driver_data;
+	return raw->count;
+}
+
+static void
+tty3215_flush_buffer(struct tty_struct *tty)
+{
+	struct raw3215_info *raw;
+
+	raw = (struct raw3215_info *) tty->driver_data;
+	raw3215_flush_buffer(raw);
+	tty_wakeup(tty);
+}
+
+/*
+ * Currently we don't have any io controls for 3215 ttys
+ */
+static int
+tty3215_ioctl(struct tty_struct *tty, struct file * file,
+	      unsigned int cmd, unsigned long arg)
+{
+	if (tty->flags & (1 << TTY_IO_ERROR))
+		return -EIO;
+
+	switch (cmd) {
+	default:
+		return -ENOIOCTLCMD;
+	}
+	return 0;
+}
+
+/*
+ * Disable reading from a 3215 tty
+ */
+static void
+tty3215_throttle(struct tty_struct * tty)
+{
+	struct raw3215_info *raw;
+
+	raw = (struct raw3215_info *) tty->driver_data;
+	raw->flags |= RAW3215_THROTTLED;
+}
+
+/*
+ * Enable reading from a 3215 tty
+ */
+static void
+tty3215_unthrottle(struct tty_struct * tty)
+{
+	struct raw3215_info *raw;
+	unsigned long flags;
+
+	raw = (struct raw3215_info *) tty->driver_data;
+	if (raw->flags & RAW3215_THROTTLED) {
+		spin_lock_irqsave(raw->lock, flags);
+		raw->flags &= ~RAW3215_THROTTLED;
+		raw3215_try_io(raw);
+		spin_unlock_irqrestore(raw->lock, flags);
+	}
+}
+
+/*
+ * Disable writing to a 3215 tty
+ */
+static void
+tty3215_stop(struct tty_struct *tty)
+{
+	struct raw3215_info *raw;
+
+	raw = (struct raw3215_info *) tty->driver_data;
+	raw->flags |= RAW3215_STOPPED;
+}
+
+/*
+ * Enable writing to a 3215 tty
+ */
+static void
+tty3215_start(struct tty_struct *tty)
+{
+	struct raw3215_info *raw;
+	unsigned long flags;
+
+	raw = (struct raw3215_info *) tty->driver_data;
+	if (raw->flags & RAW3215_STOPPED) {
+		spin_lock_irqsave(raw->lock, flags);
+		raw->flags &= ~RAW3215_STOPPED;
+		raw3215_try_io(raw);
+		spin_unlock_irqrestore(raw->lock, flags);
+	}
+}
+
+static struct tty_operations tty3215_ops = {
+	.open = tty3215_open,
+	.close = tty3215_close,
+	.write = tty3215_write,
+	.put_char = tty3215_put_char,
+	.flush_chars = tty3215_flush_chars,
+	.write_room = tty3215_write_room,
+	.chars_in_buffer = tty3215_chars_in_buffer,
+	.flush_buffer = tty3215_flush_buffer,
+	.ioctl = tty3215_ioctl,
+	.throttle = tty3215_throttle,
+	.unthrottle = tty3215_unthrottle,
+	.stop = tty3215_stop,
+	.start = tty3215_start,
+};
+
+/*
+ * 3215 tty registration code called from tty_init().
+ * Most kernel services (incl. kmalloc) are available at this poimt.
+ */
+int __init
+tty3215_init(void)
+{
+	struct tty_driver *driver;
+	int ret;
+
+	if (!CONSOLE_IS_3215)
+		return 0;
+
+	driver = alloc_tty_driver(NR_3215);
+	if (!driver)
+		return -ENOMEM;
+
+	ret = ccw_driver_register(&raw3215_ccw_driver);
+	if (ret) {
+		put_tty_driver(driver);
+		return ret;
+	}
+	/*
+	 * Initialize the tty_driver structure
+	 * Entries in tty3215_driver that are NOT initialized:
+	 * proc_entry, set_termios, flush_buffer, set_ldisc, write_proc
+	 */
+
+	driver->owner = THIS_MODULE;
+	driver->driver_name = "tty3215";
+	driver->name = "ttyS";
+	driver->major = TTY_MAJOR;
+	driver->minor_start = 64;
+	driver->type = TTY_DRIVER_TYPE_SYSTEM;
+	driver->subtype = SYSTEM_TYPE_TTY;
+	driver->init_termios = tty_std_termios;
+	driver->init_termios.c_iflag = IGNBRK | IGNPAR;
+	driver->init_termios.c_oflag = ONLCR | XTABS;
+	driver->init_termios.c_lflag = ISIG;
+	driver->flags = TTY_DRIVER_REAL_RAW;
+	tty_set_operations(driver, &tty3215_ops);
+	ret = tty_register_driver(driver);
+	if (ret) {
+		printk("Couldn't register tty3215 driver\n");
+		put_tty_driver(driver);
+		return ret;
+	}
+	tty3215_driver = driver;
+	return 0;
+}
+
+static void __exit
+tty3215_exit(void)
+{
+	tty_unregister_driver(tty3215_driver);
+	put_tty_driver(tty3215_driver);
+	ccw_driver_unregister(&raw3215_ccw_driver);
+}
+
+module_init(tty3215_init);
+module_exit(tty3215_exit);
diff --git a/drivers/s390/char/con3270.c b/drivers/s390/char/con3270.c
new file mode 100644
index 0000000..d52fb57
--- /dev/null
+++ b/drivers/s390/char/con3270.c
@@ -0,0 +1,638 @@
+/*
+ *  drivers/s390/char/con3270.c
+ *    IBM/3270 Driver - console view.
+ *
+ *  Author(s):
+ *    Original 3270 Code for 2.4 written by Richard Hitt (UTS Global)
+ *    Rewritten for 2.5 by Martin Schwidefsky <schwidefsky@de.ibm.com>
+ *	-- Copyright (C) 2003 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ */
+
+#include <linux/config.h>
+#include <linux/bootmem.h>
+#include <linux/console.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/types.h>
+
+#include <asm/ccwdev.h>
+#include <asm/cio.h>
+#include <asm/cpcmd.h>
+#include <asm/ebcdic.h>
+
+#include "raw3270.h"
+#include "ctrlchar.h"
+
+#define CON3270_OUTPUT_BUFFER_SIZE 1024
+#define CON3270_STRING_PAGES 4
+
+static struct raw3270_fn con3270_fn;
+
+/*
+ * Main 3270 console view data structure.
+ */
+struct con3270 {
+	struct raw3270_view view;
+	spinlock_t lock;
+	struct list_head freemem;	/* list of free memory for strings. */
+
+	/* Output stuff. */
+	struct list_head lines;		/* list of lines. */
+	struct list_head update;	/* list of lines to update. */
+	int line_nr;			/* line number for next update. */
+	int nr_lines;			/* # lines in list. */
+	int nr_up;			/* # lines up in history. */
+	unsigned long update_flags;	/* Update indication bits. */
+	struct string *cline;		/* current output line. */
+	struct string *status;		/* last line of display. */
+	struct raw3270_request *write;	/* single write request. */
+	struct timer_list timer;
+
+	/* Input stuff. */
+	struct string *input;		/* input string for read request. */
+	struct raw3270_request *read;	/* single read request. */
+	struct raw3270_request *kreset;	/* single keyboard reset request. */
+	struct tasklet_struct readlet;	/* tasklet to issue read request. */
+};
+
+static struct con3270 *condev;
+
+/* con3270->update_flags. See con3270_update for details. */
+#define CON_UPDATE_ERASE	1	/* Use EWRITEA instead of WRITE. */
+#define CON_UPDATE_LIST		2	/* Update lines in tty3270->update. */
+#define CON_UPDATE_STATUS	4	/* Update status line. */
+#define CON_UPDATE_ALL		7
+
+static void con3270_update(struct con3270 *);
+
+/*
+ * Setup timeout for a device. On timeout trigger an update.
+ */
+void
+con3270_set_timer(struct con3270 *cp, int expires)
+{
+	if (expires == 0) {
+		if (timer_pending(&cp->timer))
+			del_timer(&cp->timer);
+		return;
+	}
+	if (timer_pending(&cp->timer) &&
+	    mod_timer(&cp->timer, jiffies + expires))
+		return;
+	cp->timer.function = (void (*)(unsigned long)) con3270_update;
+	cp->timer.data = (unsigned long) cp;
+	cp->timer.expires = jiffies + expires;
+	add_timer(&cp->timer);
+}
+
+/*
+ * The status line is the last line of the screen. It shows the string
+ * "console view" in the lower left corner and "Running"/"More..."/"Holding"
+ * in the lower right corner of the screen.
+ */
+static void
+con3270_update_status(struct con3270 *cp)
+{
+	char *str;
+
+	str = (cp->nr_up != 0) ? "History" : "Running";
+	memcpy(cp->status->string + 24, str, 7);
+	codepage_convert(cp->view.ascebc, cp->status->string + 24, 7);
+	cp->update_flags |= CON_UPDATE_STATUS;
+}
+
+static void
+con3270_create_status(struct con3270 *cp)
+{
+	static const unsigned char blueprint[] =
+		{ TO_SBA, 0, 0, TO_SF,TF_LOG,TO_SA,TAT_COLOR, TAC_GREEN,
+		  'c','o','n','s','o','l','e',' ','v','i','e','w',
+		  TO_RA,0,0,0,'R','u','n','n','i','n','g',TO_SF,TF_LOG };
+
+	cp->status = alloc_string(&cp->freemem, sizeof(blueprint));
+	/* Copy blueprint to status line */
+	memcpy(cp->status->string, blueprint, sizeof(blueprint));
+	/* Set TO_RA addresses. */
+	raw3270_buffer_address(cp->view.dev, cp->status->string + 1,
+			       cp->view.cols * (cp->view.rows - 1));
+	raw3270_buffer_address(cp->view.dev, cp->status->string + 21,
+			       cp->view.cols * cp->view.rows - 8);
+	/* Convert strings to ebcdic. */
+	codepage_convert(cp->view.ascebc, cp->status->string + 8, 12);
+	codepage_convert(cp->view.ascebc, cp->status->string + 24, 7);
+}
+
+/*
+ * Set output offsets to 3270 datastream fragment of a console string.
+ */
+static void
+con3270_update_string(struct con3270 *cp, struct string *s, int nr)
+{
+	if (s->len >= cp->view.cols - 5)
+		return;
+	raw3270_buffer_address(cp->view.dev, s->string + s->len - 3,
+			       cp->view.cols * (nr + 1));
+}
+
+/*
+ * Rebuild update list to print all lines.
+ */
+static void
+con3270_rebuild_update(struct con3270 *cp)
+{
+	struct string *s, *n;
+	int nr;
+
+	/* 
+	 * Throw away update list and create a new one,
+	 * containing all lines that will fit on the screen.
+	 */
+	list_for_each_entry_safe(s, n, &cp->update, update)
+		list_del_init(&s->update);
+	nr = cp->view.rows - 2 + cp->nr_up;
+	list_for_each_entry_reverse(s, &cp->lines, list) {
+		if (nr < cp->view.rows - 1)
+			list_add(&s->update, &cp->update);
+		if (--nr < 0)
+			break;
+	}
+	cp->line_nr = 0;
+	cp->update_flags |= CON_UPDATE_LIST;
+}
+
+/*
+ * Alloc string for size bytes. Free strings from history if necessary.
+ */
+static struct string *
+con3270_alloc_string(struct con3270 *cp, size_t size)
+{
+	struct string *s, *n;
+
+	s = alloc_string(&cp->freemem, size);
+	if (s)
+		return s;
+	list_for_each_entry_safe(s, n, &cp->lines, list) {
+		list_del(&s->list);
+		if (!list_empty(&s->update))
+			list_del(&s->update);
+		cp->nr_lines--;
+		if (free_string(&cp->freemem, s) >= size)
+			break;
+	}
+	s = alloc_string(&cp->freemem, size);
+	BUG_ON(!s);
+	if (cp->nr_up != 0 && cp->nr_up + cp->view.rows > cp->nr_lines) {
+		cp->nr_up = cp->nr_lines - cp->view.rows + 1;
+		con3270_rebuild_update(cp);
+		con3270_update_status(cp);
+	}
+	return s;
+}
+
+/*
+ * Write completion callback.
+ */
+static void
+con3270_write_callback(struct raw3270_request *rq, void *data)
+{
+	raw3270_request_reset(rq);
+	xchg(&((struct con3270 *) rq->view)->write, rq);
+}
+
+/*
+ * Update console display.
+ */
+static void
+con3270_update(struct con3270 *cp)
+{
+	struct raw3270_request *wrq;
+	char wcc, prolog[6];
+	unsigned long flags;
+	unsigned long updated;
+	struct string *s, *n;
+	int rc;
+
+	wrq = xchg(&cp->write, 0);
+	if (!wrq) {
+		con3270_set_timer(cp, 1);
+		return;
+	}
+
+	spin_lock_irqsave(&cp->view.lock, flags);
+	updated = 0;
+	if (cp->update_flags & CON_UPDATE_ERASE) {
+		/* Use erase write alternate to initialize display. */
+		raw3270_request_set_cmd(wrq, TC_EWRITEA);
+		updated |= CON_UPDATE_ERASE;
+	} else
+		raw3270_request_set_cmd(wrq, TC_WRITE);
+
+	wcc = TW_NONE;
+	raw3270_request_add_data(wrq, &wcc, 1);
+
+	/*
+	 * Update status line.
+	 */
+	if (cp->update_flags & CON_UPDATE_STATUS)
+		if (raw3270_request_add_data(wrq, cp->status->string,
+					     cp->status->len) == 0)
+			updated |= CON_UPDATE_STATUS;
+
+	if (cp->update_flags & CON_UPDATE_LIST) {
+		prolog[0] = TO_SBA;
+		prolog[3] = TO_SA;
+		prolog[4] = TAT_COLOR;
+		prolog[5] = TAC_TURQ;
+		raw3270_buffer_address(cp->view.dev, prolog + 1,
+				       cp->view.cols * cp->line_nr);
+		raw3270_request_add_data(wrq, prolog, 6);
+		/* Write strings in the update list to the screen. */
+		list_for_each_entry_safe(s, n, &cp->update, update) {
+			if (s != cp->cline)
+				con3270_update_string(cp, s, cp->line_nr);
+			if (raw3270_request_add_data(wrq, s->string,
+						     s->len) != 0)
+				break;
+			list_del_init(&s->update);
+			if (s != cp->cline)
+				cp->line_nr++;
+		}
+		if (list_empty(&cp->update))
+			updated |= CON_UPDATE_LIST;
+	}
+	wrq->callback = con3270_write_callback;
+	rc = raw3270_start(&cp->view, wrq);
+	if (rc == 0) {
+		cp->update_flags &= ~updated;
+		if (cp->update_flags)
+			con3270_set_timer(cp, 1);
+	} else {
+		raw3270_request_reset(wrq);
+		xchg(&cp->write, wrq);
+	}
+	spin_unlock_irqrestore(&cp->view.lock, flags);
+}
+
+/*
+ * Read tasklet.
+ */
+static void
+con3270_read_tasklet(struct raw3270_request *rrq)
+{
+	static char kreset_data = TW_KR;
+	struct con3270 *cp;
+	unsigned long flags;
+	int nr_up, deactivate;
+
+	cp = (struct con3270 *) rrq->view;
+	spin_lock_irqsave(&cp->view.lock, flags);
+	nr_up = cp->nr_up;
+	deactivate = 0;
+	/* Check aid byte. */
+	switch (cp->input->string[0]) {
+	case 0x7d:	/* enter: jump to bottom. */
+		nr_up = 0;
+		break;
+	case 0xf3:	/* PF3: deactivate the console view. */
+		deactivate = 1;
+		break;
+	case 0x6d:	/* clear: start from scratch. */
+		con3270_rebuild_update(cp);
+		cp->update_flags = CON_UPDATE_ALL;
+		con3270_set_timer(cp, 1);
+		break;
+	case 0xf7:	/* PF7: do a page up in the console log. */
+		nr_up += cp->view.rows - 2;
+		if (nr_up + cp->view.rows - 1 > cp->nr_lines) {
+			nr_up = cp->nr_lines - cp->view.rows + 1;
+			if (nr_up < 0)
+				nr_up = 0;
+		}
+		break;
+	case 0xf8:	/* PF8: do a page down in the console log. */
+		nr_up -= cp->view.rows - 2;
+		if (nr_up < 0)
+			nr_up = 0;
+		break;
+	}
+	if (nr_up != cp->nr_up) {
+		cp->nr_up = nr_up;
+		con3270_rebuild_update(cp);
+		con3270_update_status(cp);
+		con3270_set_timer(cp, 1);
+	}
+	spin_unlock_irqrestore(&cp->view.lock, flags);
+
+	/* Start keyboard reset command. */
+	raw3270_request_reset(cp->kreset);
+	raw3270_request_set_cmd(cp->kreset, TC_WRITE);
+	raw3270_request_add_data(cp->kreset, &kreset_data, 1);
+	raw3270_start(&cp->view, cp->kreset);
+
+	if (deactivate)
+		raw3270_deactivate_view(&cp->view);
+
+	raw3270_request_reset(rrq);
+	xchg(&cp->read, rrq);
+	raw3270_put_view(&cp->view);
+}
+
+/*
+ * Read request completion callback.
+ */
+static void
+con3270_read_callback(struct raw3270_request *rq, void *data)
+{
+	raw3270_get_view(rq->view);
+	/* Schedule tasklet to pass input to tty. */
+	tasklet_schedule(&((struct con3270 *) rq->view)->readlet);
+}
+
+/*
+ * Issue a read request. Called only from interrupt function.
+ */
+static void
+con3270_issue_read(struct con3270 *cp)
+{
+	struct raw3270_request *rrq;
+	int rc;
+
+	rrq = xchg(&cp->read, 0);
+	if (!rrq)
+		/* Read already scheduled. */
+		return;
+	rrq->callback = con3270_read_callback;
+	rrq->callback_data = cp;
+	raw3270_request_set_cmd(rrq, TC_READMOD);
+	raw3270_request_set_data(rrq, cp->input->string, cp->input->len);
+	/* Issue the read modified request. */
+	rc = raw3270_start_irq(&cp->view, rrq);
+	if (rc)
+		raw3270_request_reset(rrq);
+}
+
+/*
+ * Switch to the console view.
+ */
+static int
+con3270_activate(struct raw3270_view *view)
+{
+	unsigned long flags;
+	struct con3270 *cp;
+
+	cp = (struct con3270 *) view;
+	spin_lock_irqsave(&cp->view.lock, flags);
+	cp->nr_up = 0;
+	con3270_rebuild_update(cp);
+	con3270_update_status(cp);
+	cp->update_flags = CON_UPDATE_ALL;
+	con3270_set_timer(cp, 1);
+	spin_unlock_irqrestore(&cp->view.lock, flags);
+	return 0;
+}
+
+static void
+con3270_deactivate(struct raw3270_view *view)
+{
+	unsigned long flags;
+	struct con3270 *cp;
+
+	cp = (struct con3270 *) view;
+	spin_lock_irqsave(&cp->view.lock, flags);
+	del_timer(&cp->timer);
+	spin_unlock_irqrestore(&cp->view.lock, flags);
+}
+
+static int
+con3270_irq(struct con3270 *cp, struct raw3270_request *rq, struct irb *irb)
+{
+	/* Handle ATTN. Schedule tasklet to read aid. */
+	if (irb->scsw.dstat & DEV_STAT_ATTENTION)
+		con3270_issue_read(cp);
+
+	if (rq) {
+		if (irb->scsw.dstat & DEV_STAT_UNIT_CHECK)
+			rq->rc = -EIO;
+		else
+			/* Normal end. Copy residual count. */
+			rq->rescnt = irb->scsw.count;
+	}
+	return RAW3270_IO_DONE;
+}
+
+/* Console view to a 3270 device. */
+static struct raw3270_fn con3270_fn = {
+	.activate = con3270_activate,
+	.deactivate = con3270_deactivate,
+	.intv = (void *) con3270_irq
+};
+
+static inline void
+con3270_cline_add(struct con3270 *cp)
+{
+	if (!list_empty(&cp->cline->list))
+		/* Already added. */
+		return;
+	list_add_tail(&cp->cline->list, &cp->lines);
+	cp->nr_lines++;
+	con3270_rebuild_update(cp);
+}
+
+static inline void
+con3270_cline_insert(struct con3270 *cp, unsigned char c)
+{
+	cp->cline->string[cp->cline->len++] = 
+		cp->view.ascebc[(c < ' ') ? ' ' : c];
+	if (list_empty(&cp->cline->update)) {
+		list_add_tail(&cp->cline->update, &cp->update);
+		cp->update_flags |= CON_UPDATE_LIST;
+	}
+}
+
+static inline void
+con3270_cline_end(struct con3270 *cp)
+{
+	struct string *s;
+	unsigned int size;
+
+	/* Copy cline. */
+	size = (cp->cline->len < cp->view.cols - 5) ?
+		cp->cline->len + 4 : cp->view.cols;
+	s = con3270_alloc_string(cp, size);
+	memcpy(s->string, cp->cline->string, cp->cline->len);
+	if (s->len < cp->view.cols - 5) {
+		s->string[s->len - 4] = TO_RA;
+		s->string[s->len - 1] = 0;
+	} else {
+		while (--size > cp->cline->len)
+			s->string[size] = cp->view.ascebc[' '];
+	}
+	/* Replace cline with allocated line s and reset cline. */
+	list_add(&s->list, &cp->cline->list);
+	list_del_init(&cp->cline->list);
+	if (!list_empty(&cp->cline->update)) {
+		list_add(&s->update, &cp->cline->update);
+		list_del_init(&cp->cline->update);
+	}
+	cp->cline->len = 0;
+}
+
+/*
+ * Write a string to the 3270 console
+ */
+static void
+con3270_write(struct console *co, const char *str, unsigned int count)
+{
+	struct con3270 *cp;
+	unsigned long flags;
+	unsigned char c;
+
+	cp = condev;
+	if (cp->view.dev)
+		raw3270_activate_view(&cp->view);
+	spin_lock_irqsave(&cp->view.lock, flags);
+	while (count-- > 0) {
+		c = *str++;
+		if (cp->cline->len == 0)
+			con3270_cline_add(cp);
+		if (c != '\n')
+			con3270_cline_insert(cp, c);
+		if (c == '\n' || cp->cline->len >= cp->view.cols)
+			con3270_cline_end(cp);
+	}
+	/* Setup timer to output current console buffer after 1/10 second */
+	if (cp->view.dev && !timer_pending(&cp->timer))
+		con3270_set_timer(cp, HZ/10);
+	spin_unlock_irqrestore(&cp->view.lock,flags);
+}
+
+extern struct tty_driver *tty3270_driver;
+
+static struct tty_driver *
+con3270_device(struct console *c, int *index)
+{
+	*index = c->index;
+	return tty3270_driver;
+}
+
+/*
+ * Wait for end of write request.
+ */
+static void
+con3270_wait_write(struct con3270 *cp)
+{
+	while (!cp->write) {
+		raw3270_wait_cons_dev(cp->view.dev);
+		barrier();
+	}
+}
+
+/*
+ * panic() calls console_unblank before the system enters a
+ * disabled, endless loop.
+ */
+static void
+con3270_unblank(void)
+{
+	struct con3270 *cp;
+	unsigned long flags;
+
+	cp = condev;
+	if (!cp->view.dev)
+		return;
+	spin_lock_irqsave(&cp->view.lock, flags);
+	con3270_wait_write(cp);
+	cp->nr_up = 0;
+	con3270_rebuild_update(cp);
+	con3270_update_status(cp);
+	while (cp->update_flags != 0) {
+		spin_unlock_irqrestore(&cp->view.lock, flags);
+		con3270_update(cp);
+		spin_lock_irqsave(&cp->view.lock, flags);
+		con3270_wait_write(cp);
+	}
+	spin_unlock_irqrestore(&cp->view.lock, flags);
+}
+
+static int __init 
+con3270_consetup(struct console *co, char *options)
+{
+	return 0;
+}
+
+/*
+ *  The console structure for the 3270 console
+ */
+static struct console con3270 = {
+	.name	 = "tty3270",
+	.write	 = con3270_write,
+	.device	 = con3270_device,
+	.unblank = con3270_unblank,
+	.setup	 = con3270_consetup,
+	.flags	 = CON_PRINTBUFFER,
+};
+
+/*
+ * 3270 console initialization code called from console_init().
+ * NOTE: This is called before kmalloc is available.
+ */
+static int __init
+con3270_init(void)
+{
+	struct ccw_device *cdev;
+	struct raw3270 *rp;
+	void *cbuf;
+	int i;
+
+	/* Check if 3270 is to be the console */
+	if (!CONSOLE_IS_3270)
+		return -ENODEV;
+
+	/* Set the console mode for VM */
+	if (MACHINE_IS_VM) {
+		cpcmd("TERM CONMODE 3270", 0, 0);
+		cpcmd("TERM AUTOCR OFF", 0, 0);
+	}
+
+	cdev = ccw_device_probe_console();
+	if (!cdev)
+		return -ENODEV;
+	rp = raw3270_setup_console(cdev);
+	if (IS_ERR(rp))
+		return PTR_ERR(rp);
+
+	condev = (struct con3270 *) alloc_bootmem_low(sizeof(struct con3270));
+	memset(condev, 0, sizeof(struct con3270));
+	condev->view.dev = rp;
+
+	condev->read = raw3270_request_alloc_bootmem(0);
+	condev->read->callback = con3270_read_callback;
+	condev->read->callback_data = condev;
+	condev->write = 
+		raw3270_request_alloc_bootmem(CON3270_OUTPUT_BUFFER_SIZE);
+	condev->kreset = raw3270_request_alloc_bootmem(1);
+
+	INIT_LIST_HEAD(&condev->lines);
+	INIT_LIST_HEAD(&condev->update);
+	init_timer(&condev->timer);
+	tasklet_init(&condev->readlet, 
+		     (void (*)(unsigned long)) con3270_read_tasklet,
+		     (unsigned long) condev->read);
+
+	raw3270_add_view(&condev->view, &con3270_fn, 0);
+
+	INIT_LIST_HEAD(&condev->freemem);
+	for (i = 0; i < CON3270_STRING_PAGES; i++) {
+		cbuf = (void *) alloc_bootmem_low_pages(PAGE_SIZE);
+		add_string_memory(&condev->freemem, cbuf, PAGE_SIZE);
+	}
+	condev->cline = alloc_string(&condev->freemem, condev->view.cols);
+	condev->cline->len = 0;
+	con3270_create_status(condev);
+	condev->input = alloc_string(&condev->freemem, 80);
+	register_console(&con3270);
+	return 0;
+}
+
+console_initcall(con3270_init);
diff --git a/drivers/s390/char/ctrlchar.c b/drivers/s390/char/ctrlchar.c
new file mode 100644
index 0000000..be46324
--- /dev/null
+++ b/drivers/s390/char/ctrlchar.c
@@ -0,0 +1,75 @@
+/*
+ *  drivers/s390/char/ctrlchar.c
+ *  Unified handling of special chars.
+ *
+ *    Copyright (C) 2001 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *    Author(s): Fritz Elfert <felfert@millenux.com> <elfert@de.ibm.com>
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/stddef.h>
+#include <asm/errno.h>
+#include <linux/sysrq.h>
+#include <linux/ctype.h>
+
+#include "ctrlchar.h"
+
+#ifdef CONFIG_MAGIC_SYSRQ
+static int ctrlchar_sysrq_key;
+
+static void
+ctrlchar_handle_sysrq(void *tty)
+{
+	handle_sysrq(ctrlchar_sysrq_key, NULL, (struct tty_struct *) tty);
+}
+
+static DECLARE_WORK(ctrlchar_work, ctrlchar_handle_sysrq, 0);
+#endif
+
+
+/**
+ * Check for special chars at start of input.
+ *
+ * @param buf Console input buffer.
+ * @param len Length of valid data in buffer.
+ * @param tty The tty struct for this console.
+ * @return CTRLCHAR_NONE, if nothing matched,
+ *         CTRLCHAR_SYSRQ, if sysrq was encountered
+ *         otherwise char to be inserted logically or'ed
+ *         with CTRLCHAR_CTRL
+ */
+unsigned int
+ctrlchar_handle(const unsigned char *buf, int len, struct tty_struct *tty)
+{
+	if ((len < 2) || (len > 3))
+		return CTRLCHAR_NONE;
+
+	/* hat is 0xb1 in codepage 037 (US etc.) and thus */
+	/* converted to 0x5e in ascii ('^') */
+	if ((buf[0] != '^') && (buf[0] != '\252'))
+		return CTRLCHAR_NONE;
+
+#ifdef CONFIG_MAGIC_SYSRQ
+	/* racy */
+	if (len == 3 && buf[1] == '-') {
+		ctrlchar_sysrq_key = buf[2];
+		ctrlchar_work.data = tty;
+		schedule_work(&ctrlchar_work);
+		return CTRLCHAR_SYSRQ;
+	}
+#endif
+
+	if (len != 2)
+		return CTRLCHAR_NONE;
+
+	switch (tolower(buf[1])) {
+	case 'c':
+		return INTR_CHAR(tty) | CTRLCHAR_CTRL;
+	case 'd':
+		return EOF_CHAR(tty)  | CTRLCHAR_CTRL;
+	case 'z':
+		return SUSP_CHAR(tty) | CTRLCHAR_CTRL;
+	}
+	return CTRLCHAR_NONE;
+}
diff --git a/drivers/s390/char/ctrlchar.h b/drivers/s390/char/ctrlchar.h
new file mode 100644
index 0000000..935ffa0
--- /dev/null
+++ b/drivers/s390/char/ctrlchar.h
@@ -0,0 +1,20 @@
+/*
+ *  drivers/s390/char/ctrlchar.c
+ *  Unified handling of special chars.
+ *
+ *    Copyright (C) 2001 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *    Author(s): Fritz Elfert <felfert@millenux.com> <elfert@de.ibm.com>
+ *
+ */
+
+#include <linux/tty.h>
+
+extern unsigned int
+ctrlchar_handle(const unsigned char *buf, int len, struct tty_struct *tty);
+
+
+#define CTRLCHAR_NONE  (1 << 8)
+#define CTRLCHAR_CTRL  (2 << 8)
+#define CTRLCHAR_SYSRQ (3 << 8)
+
+#define CTRLCHAR_MASK (~0xffu)
diff --git a/drivers/s390/char/defkeymap.c b/drivers/s390/char/defkeymap.c
new file mode 100644
index 0000000..ca15adb
--- /dev/null
+++ b/drivers/s390/char/defkeymap.c
@@ -0,0 +1,156 @@
+
+/* Do not edit this file! It was automatically generated by   */
+/*    loadkeys --mktable defkeymap.map > defkeymap.c          */
+
+#include <linux/types.h>
+#include <linux/keyboard.h>
+#include <linux/kd.h>
+
+u_short plain_map[NR_KEYS] = {
+	0xf000,	0xf000,	0xf000,	0xf000,	0xf000,	0xf000,	0xf000,	0xf000,
+	0xf000,	0xf000,	0xf000,	0xf000,	0xf000,	0xf000,	0xf000,	0xf000,
+	0xf000,	0xf000,	0xf000,	0xf000,	0xf000,	0xf000,	0xf000,	0xf000,
+	0xf000,	0xf000,	0xf000,	0xf000,	0xf000,	0xf000,	0xf000,	0xf000,
+	0xf000,	0xf000,	0xf000,	0xf000,	0xf000,	0xf000,	0xf000,	0xf000,
+	0xf000,	0xf000,	0xf000,	0xf000,	0xf000,	0xf000,	0xf000,	0xf000,
+	0xf000,	0xf000,	0xf000,	0xf000,	0xf000,	0xf000,	0xf000,	0xf000,
+	0xf000,	0xf000,	0xf000,	0xf000,	0xf000,	0xf000,	0xf000,	0xf000,
+	0xf020,	0xf000,	0xf0e2,	0xf0e4,	0xf0e0,	0xf0e1,	0xf0e3,	0xf0e5,
+	0xf0e7,	0xf0f1,	0xf0a2,	0xf02e,	0xf03c,	0xf028,	0xf02b,	0xf07c,
+	0xf026,	0xf0e9,	0xf0e2,	0xf0eb,	0xf0e8,	0xf0ed,	0xf0ee,	0xf0ef,
+	0xf0ec,	0xf0df,	0xf021,	0xf024,	0xf02a,	0xf029,	0xf03b,	0xf0ac,
+	0xf02d,	0xf02f,	0xf0c2,	0xf0c4,	0xf0c0,	0xf0c1,	0xf0c3,	0xf0c5,
+	0xf0c7,	0xf0d1,	0xf0a6,	0xf02c,	0xf025,	0xf05f,	0xf03e,	0xf03f,
+	0xf0f8,	0xf0c9,	0xf0ca,	0xf0cb,	0xf0c8,	0xf0cd,	0xf0ce,	0xf0cf,
+	0xf0cc,	0xf060,	0xf03a,	0xf023,	0xf040,	0xf027,	0xf03d,	0xf022,
+};
+
+static u_short shift_map[NR_KEYS] = {
+	0xf0d8,	0xf061,	0xf062,	0xf063,	0xf064,	0xf065,	0xf066,	0xf067,
+	0xf068,	0xf069,	0xf0ab,	0xf0bb,	0xf0f0,	0xf0fd,	0xf0fe,	0xf0b1,
+	0xf0b0,	0xf06a,	0xf06b,	0xf06c,	0xf06d,	0xf06e,	0xf06f,	0xf070,
+	0xf071,	0xf072,	0xf000,	0xf000,	0xf0e6,	0xf0b8,	0xf0c6,	0xf0a4,
+	0xf0b5,	0xf07e,	0xf073,	0xf074,	0xf075,	0xf076,	0xf077,	0xf078,
+	0xf079,	0xf07a,	0xf0a1,	0xf0bf,	0xf0d0,	0xf0dd,	0xf0de,	0xf0ae,
+	0xf402,	0xf0a3,	0xf0a5,	0xf0b7,	0xf0a9,	0xf0a7,	0xf0b6,	0xf0bc,
+	0xf0bd,	0xf0be,	0xf05b,	0xf05d,	0xf000,	0xf0a8,	0xf0b4,	0xf0d7,
+	0xf07b,	0xf041,	0xf042,	0xf043,	0xf044,	0xf045,	0xf046,	0xf047,
+	0xf048,	0xf049,	0xf000,	0xf0f4,	0xf0f6,	0xf0f2,	0xf0f3,	0xf0f5,
+	0xf07d,	0xf04a,	0xf04b,	0xf04c,	0xf04d,	0xf04e,	0xf04f,	0xf050,
+	0xf051,	0xf052,	0xf0b9,	0xf0fb,	0xf0fc,	0xf0f9,	0xf0fa,	0xf0ff,
+	0xf05c,	0xf0f7,	0xf053,	0xf054,	0xf055,	0xf056,	0xf057,	0xf058,
+	0xf059,	0xf05a,	0xf0b2,	0xf0d4,	0xf0d6,	0xf0d2,	0xf0d3,	0xf0d5,
+	0xf030,	0xf031,	0xf032,	0xf033,	0xf034,	0xf035,	0xf036,	0xf037,
+	0xf038,	0xf039,	0xf0b3,	0xf0db,	0xf0dc,	0xf0d9,	0xf0da,	0xf000,
+};
+
+static u_short ctrl_map[NR_KEYS] = {
+	0xf200,	0xf200,	0xf200,	0xf200,	0xf200,	0xf200,	0xf200,	0xf200,
+	0xf200,	0xf200,	0xf200,	0xf200,	0xf200,	0xf200,	0xf200,	0xf200,
+	0xf200,	0xf200,	0xf200,	0xf200,	0xf200,	0xf200,	0xf200,	0xf200,
+	0xf200,	0xf200,	0xf200,	0xf200,	0xf200,	0xf200,	0xf200,	0xf200,
+	0xf200,	0xf200,	0xf200,	0xf200,	0xf200,	0xf200,	0xf200,	0xf200,
+	0xf200,	0xf200,	0xf200,	0xf200,	0xf200,	0xf200,	0xf200,	0xf200,
+	0xf200,	0xf200,	0xf200,	0xf200,	0xf200,	0xf200,	0xf200,	0xf200,
+	0xf200,	0xf200,	0xf200,	0xf200,	0xf200,	0xf200,	0xf200,	0xf200,
+	0xf200,	0xf200,	0xf200,	0xf200,	0xf200,	0xf200,	0xf200,	0xf200,
+	0xf200,	0xf200,	0xf11f,	0xf120,	0xf121,	0xf200,	0xf200,	0xf200,
+	0xf200,	0xf200,	0xf200,	0xf200,	0xf200,	0xf200,	0xf200,	0xf200,
+	0xf200,	0xf200,	0xf200,	0xf200,	0xf200,	0xf200,	0xf200,	0xf200,
+	0xf200,	0xf200,	0xf200,	0xf200,	0xf200,	0xf200,	0xf200,	0xf200,
+	0xf200,	0xf200,	0xf200,	0xf01a,	0xf003,	0xf212,	0xf004,	0xf200,
+	0xf200,	0xf200,	0xf200,	0xf200,	0xf200,	0xf200,	0xf200,	0xf200,
+	0xf200,	0xf200,	0xf109,	0xf10a,	0xf206,	0xf00a,	0xf200,	0xf200,
+};
+
+static u_short shift_ctrl_map[NR_KEYS] = {
+	0xf200,	0xf200,	0xf200,	0xf200,	0xf200,	0xf200,	0xf200,	0xf200,
+	0xf200,	0xf200,	0xf200,	0xf200,	0xf200,	0xf200,	0xf200,	0xf200,
+	0xf200,	0xf200,	0xf200,	0xf200,	0xf200,	0xf200,	0xf200,	0xf200,
+	0xf200,	0xf200,	0xf200,	0xf200,	0xf200,	0xf200,	0xf200,	0xf200,
+	0xf200,	0xf200,	0xf200,	0xf200,	0xf200,	0xf200,	0xf200,	0xf200,
+	0xf200,	0xf200,	0xf200,	0xf200,	0xf200,	0xf200,	0xf200,	0xf200,
+	0xf200,	0xf200,	0xf200,	0xf200,	0xf200,	0xf200,	0xf200,	0xf200,
+	0xf200,	0xf200,	0xf200,	0xf200,	0xf200,	0xf200,	0xf200,	0xf200,
+	0xf200,	0xf10c,	0xf10d,	0xf10e,	0xf10f,	0xf110,	0xf111,	0xf112,
+	0xf113,	0xf11e,	0xf200,	0xf200,	0xf200,	0xf200,	0xf200,	0xf200,
+	0xf200,	0xf200,	0xf200,	0xf200,	0xf200,	0xf200,	0xf200,	0xf200,
+	0xf200,	0xf200,	0xf200,	0xf200,	0xf200,	0xf200,	0xf200,	0xf200,
+	0xf200,	0xf200,	0xf200,	0xf200,	0xf200,	0xf200,	0xf200,	0xf200,
+	0xf200,	0xf200,	0xf200,	0xf200,	0xf200,	0xf200,	0xf200,	0xf200,
+	0xf200,	0xf100,	0xf101,	0xf211,	0xf103,	0xf104,	0xf105,	0xf20b,
+	0xf20a,	0xf108,	0xf200,	0xf200,	0xf200,	0xf200,	0xf200,	0xf200,
+};
+
+ushort *key_maps[MAX_NR_KEYMAPS] = {
+	plain_map, shift_map, 0, 0,
+	ctrl_map, shift_ctrl_map,	0
+};
+
+unsigned int keymap_count = 4;
+
+
+/*
+ * Philosophy: most people do not define more strings, but they who do
+ * often want quite a lot of string space. So, we statically allocate
+ * the default and allocate dynamically in chunks of 512 bytes.
+ */
+
+char func_buf[] = {
+	'\033', '[', '[', 'A', 0, 
+	'\033', '[', '[', 'B', 0, 
+	'\033', '[', '[', 'C', 0, 
+	'\033', '[', '[', 'D', 0, 
+	'\033', '[', '[', 'E', 0, 
+	'\033', '[', '1', '7', '~', 0, 
+	'\033', '[', '1', '8', '~', 0, 
+	'\033', '[', '1', '9', '~', 0, 
+	'\033', '[', '2', '0', '~', 0, 
+	'\033', '[', '2', '1', '~', 0, 
+	'\033', '[', '2', '3', '~', 0, 
+	'\033', '[', '2', '4', '~', 0, 
+	'\033', '[', '2', '5', '~', 0, 
+	'\033', '[', '2', '6', '~', 0, 
+	'\033', '[', '2', '8', '~', 0, 
+	'\033', '[', '2', '9', '~', 0, 
+	'\033', '[', '3', '1', '~', 0, 
+	'\033', '[', '3', '2', '~', 0, 
+	'\033', '[', '3', '3', '~', 0, 
+	'\033', '[', '3', '4', '~', 0, 
+};
+
+
+char *funcbufptr = func_buf;
+int funcbufsize = sizeof(func_buf);
+int funcbufleft = 0;          /* space left */
+
+char *func_table[MAX_NR_FUNC] = {
+	func_buf + 0,
+	func_buf + 5,
+	func_buf + 10,
+	func_buf + 15,
+	func_buf + 20,
+	func_buf + 25,
+	func_buf + 31,
+	func_buf + 37,
+	func_buf + 43,
+	func_buf + 49,
+	func_buf + 55,
+	func_buf + 61,
+	func_buf + 67,
+	func_buf + 73,
+	func_buf + 79,
+	func_buf + 85,
+	func_buf + 91,
+	func_buf + 97,
+	func_buf + 103,
+	func_buf + 109,
+	0,
+};
+
+struct kbdiacr accent_table[MAX_DIACR] = {
+	{'^', 'c', '\003'},	{'^', 'd', '\004'},
+	{'^', 'z', '\032'},	{'^', '\012', '\000'},
+};
+
+unsigned int accent_table_size = 4;
diff --git a/drivers/s390/char/defkeymap.map b/drivers/s390/char/defkeymap.map
new file mode 100644
index 0000000..353b3f2
--- /dev/null
+++ b/drivers/s390/char/defkeymap.map
@@ -0,0 +1,191 @@
+# Default keymap for 3270 (ebcdic codepage 037).
+keymaps 0-1,4-5
+
+keycode   0 = nul		Oslash
+keycode   1 = nul		a
+keycode   2 = nul		b
+keycode   3 = nul		c
+keycode   4 = nul		d
+keycode   5 = nul		e
+keycode   6 = nul		f
+keycode   7 = nul		g
+keycode   8 = nul		h
+keycode   9 = nul		i
+keycode  10 = nul		guillemotleft
+keycode  11 = nul		guillemotright
+keycode  12 = nul		eth
+keycode  13 = nul		yacute
+keycode  14 = nul		thorn
+keycode  15 = nul		plusminus
+keycode  16 = nul		degree
+keycode  17 = nul		j
+keycode  18 = nul		k
+keycode  19 = nul		l
+keycode  20 = nul		m
+keycode  21 = nul		n
+keycode  22 = nul		o
+keycode  23 = nul		p
+keycode  24 = nul		q
+keycode  25 = nul		r
+keycode  26 = nul		nul
+keycode  27 = nul		nul
+keycode  28 = nul		ae
+keycode  29 = nul		cedilla
+keycode  30 = nul		AE
+keycode  31 = nul		currency
+keycode  32 = nul		mu
+keycode  33 = nul		tilde
+keycode  34 = nul		s
+keycode  35 = nul		t
+keycode  36 = nul		u
+keycode  37 = nul		v
+keycode  38 = nul		w
+keycode  39 = nul		x
+keycode  40 = nul		y
+keycode  41 = nul		z
+keycode  42 = nul		exclamdown
+keycode  43 = nul		questiondown
+keycode  44 = nul		ETH
+keycode  45 = nul		Yacute
+keycode  46 = nul		THORN
+keycode  47 = nul		registered
+keycode  48 = nul		dead_circumflex
+keycode  49 = nul		sterling
+keycode  50 = nul		yen
+keycode  51 = nul		periodcentered
+keycode  52 = nul		copyright
+keycode  53 = nul		section
+keycode  54 = nul		paragraph
+keycode  55 = nul		onequarter
+keycode  56 = nul		onehalf
+keycode  57 = nul		threequarters
+keycode  58 = nul		bracketleft
+keycode  59 = nul		bracketright
+keycode  60 = nul		nul
+keycode  61 = nul		diaeresis
+keycode  62 = nul		acute
+keycode  63 = nul		multiply
+keycode  64 = space		braceleft
+keycode  65 = nul		A
+keycode  66 = acircumflex	B
+keycode  67 = adiaeresis	C
+keycode  68 = agrave		D
+keycode  69 = aacute		E
+keycode  70 = atilde		F
+keycode  71 = aring		G
+keycode  72 = ccedilla		H
+keycode  73 = ntilde		I
+keycode  74 = cent		nul
+keycode  75 = period		ocircumflex
+keycode  76 = less		odiaeresis
+keycode  77 = parenleft		ograve
+keycode  78 = plus		oacute
+keycode  79 = bar		otilde
+keycode  80 = ampersand		braceright
+keycode  81 = eacute		J
+keycode  82 = acircumflex	K
+keycode  83 = ediaeresis	L
+keycode  84 = egrave		M
+keycode  85 = iacute		N
+keycode  86 = icircumflex	O
+keycode  87 = idiaeresis	P
+keycode  88 = igrave		Q
+keycode  89 = ssharp		R
+keycode  90 = exclam		onesuperior
+keycode  91 = dollar		ucircumflex
+keycode  92 = asterisk		udiaeresis
+keycode  93 = parenright	ugrave
+keycode  94 = semicolon		uacute
+keycode  95 = notsign		ydiaeresis
+keycode  96 = minus		backslash
+keycode  97 = slash		division
+keycode  98 = Acircumflex	S
+keycode  99 = Adiaeresis	T
+keycode 100 = Agrave		U
+keycode 101 = Aacute		V
+keycode 102 = Atilde		W
+keycode 103 = Aring		X
+keycode 104 = Ccedilla		Y
+keycode 105 = Ntilde		Z
+keycode 106 = brokenbar		twosuperior
+keycode 107 = comma		Ocircumflex
+keycode 108 = percent		Odiaeresis
+keycode 109 = underscore	Ograve
+keycode 110 = greater		Oacute
+keycode 111 = question		Otilde
+keycode 112 = oslash		zero
+keycode 113 = Eacute		one
+keycode 114 = Ecircumflex	two
+keycode 115 = Ediaeresis	three
+keycode 116 = Egrave		four
+keycode 117 = Iacute		five
+keycode 118 = Icircumflex	six
+keycode 119 = Idiaeresis	seven
+keycode 120 = Igrave		eight
+keycode 121 = grave		nine
+keycode 122 = colon		threesuperior
+keycode 123 = numbersign	Ucircumflex
+keycode 124 = at		Udiaeresis
+keycode 125 = apostrophe	Ugrave
+keycode 126 = equal		Uacute
+keycode 127 = quotedbl		nul
+
+# AID keys
+control keycode  74 = F22
+control keycode  75 = F23
+control keycode  76 = F24
+control keycode 107 = Control_z		# PA3
+control keycode 108 = Control_c		# PA1
+control keycode 109 = KeyboardSignal	# Clear
+control keycode 110 = Control_d		# PA2
+control keycode 122 = F10
+control keycode 123 = F11		# F11
+control keycode 124 = Last_Console	# F12
+control keycode 125 = Linefeed
+shift control keycode  65 = F13
+shift control keycode  66 = F14
+shift control keycode  67 = F15
+shift control keycode  68 = F16
+shift control keycode  69 = F17
+shift control keycode  70 = F18
+shift control keycode  71 = F19
+shift control keycode  72 = F20
+shift control keycode  73 = F21
+shift control keycode 113 = F1
+shift control keycode 114 = F2
+shift control keycode 115 = Incr_Console
+shift control keycode 116 = F4
+shift control keycode 117 = F5
+shift control keycode 118 = F6
+shift control keycode 119 = Scroll_Backward
+shift control keycode 120 = Scroll_Forward
+shift control keycode 121 = F9
+
+string F1 = "\033[[A"
+string F2 = "\033[[B"
+string F3 = "\033[[C"
+string F4 = "\033[[D"
+string F5 = "\033[[E"
+string F6 = "\033[17~"
+string F7 = "\033[18~"
+string F8 = "\033[19~"
+string F9 = "\033[20~"
+string F10 = "\033[21~"
+string F11 = "\033[23~"
+string F12 = "\033[24~"
+string F13 = "\033[25~"
+string F14 = "\033[26~"
+string F15 = "\033[28~"
+string F16 = "\033[29~"
+string F17 = "\033[31~"
+string F18 = "\033[32~"
+string F19 = "\033[33~"
+string F20 = "\033[34~"
+# string F21 ??
+# string F22 ??
+# string F23 ??
+# string F24 ??
+compose '^' 'c' to Control_c
+compose '^' 'd' to Control_d
+compose '^' 'z' to Control_z
+compose '^' '\012' to nul
diff --git a/drivers/s390/char/fs3270.c b/drivers/s390/char/fs3270.c
new file mode 100644
index 0000000..60afcdc
--- /dev/null
+++ b/drivers/s390/char/fs3270.c
@@ -0,0 +1,373 @@
+/*
+ *  drivers/s390/char/fs3270.c
+ *    IBM/3270 Driver - fullscreen driver.
+ *
+ *  Author(s):
+ *    Original 3270 Code for 2.4 written by Richard Hitt (UTS Global)
+ *    Rewritten for 2.5/2.6 by Martin Schwidefsky <schwidefsky@de.ibm.com>
+ *	-- Copyright (C) 2003 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ */
+
+#include <linux/config.h>
+#include <linux/bootmem.h>
+#include <linux/console.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/types.h>
+
+#include <asm/ccwdev.h>
+#include <asm/cio.h>
+#include <asm/cpcmd.h>
+#include <asm/ebcdic.h>
+#include <asm/idals.h>
+
+#include "raw3270.h"
+#include "ctrlchar.h"
+
+struct raw3270_fn fs3270_fn;
+
+struct fs3270 {
+	struct raw3270_view view;
+	pid_t fs_pid;			/* Pid of controlling program. */
+	int read_command;		/* ccw command to use for reads. */
+	int write_command;		/* ccw command to use for writes. */
+	int attention;			/* Got attention. */
+	struct raw3270_request *clear;	/* single clear request. */
+	wait_queue_head_t attn_wait;	/* Attention wait queue. */
+};
+
+static void
+fs3270_wake_up(struct raw3270_request *rq, void *data)
+{
+	wake_up((wait_queue_head_t *) data);
+}
+
+static int
+fs3270_do_io(struct raw3270_view *view, struct raw3270_request *rq)
+{
+	wait_queue_head_t wq;
+	int rc;
+
+	init_waitqueue_head(&wq);
+	rq->callback = fs3270_wake_up;
+	rq->callback_data = &wq;
+	rc = raw3270_start(view, rq);
+	if (rc)
+		return rc;
+	/* Started sucessfully. Now wait for completion. */
+	wait_event(wq, raw3270_request_final(rq));
+	return rq->rc;
+}
+
+static void
+fs3270_reset_callback(struct raw3270_request *rq, void *data)
+{
+	raw3270_request_reset(rq);
+}
+
+/*
+ * Switch to the fullscreen view.
+ */
+static int
+fs3270_activate(struct raw3270_view *view)
+{
+	struct fs3270 *fp;
+
+	fp = (struct fs3270 *) view;
+	raw3270_request_set_cmd(fp->clear, TC_EWRITEA);
+	fp->clear->callback = fs3270_reset_callback;
+	return raw3270_start(view, fp->clear);
+}
+
+/*
+ * Shutdown fullscreen view.
+ */
+static void
+fs3270_deactivate(struct raw3270_view *view)
+{
+	// FIXME: is this a good idea? The user program using fullscreen 3270
+	// will die just because a console message appeared. On the other
+	// hand the fullscreen device is unoperational now.
+	struct fs3270 *fp;
+
+	fp = (struct fs3270 *) view;
+	if (fp->fs_pid != 0)
+		kill_proc(fp->fs_pid, SIGHUP, 1);
+	fp->fs_pid = 0;
+}
+
+static int
+fs3270_irq(struct fs3270 *fp, struct raw3270_request *rq, struct irb *irb)
+{
+	/* Handle ATTN. Set indication and wake waiters for attention. */
+	if (irb->scsw.dstat & DEV_STAT_ATTENTION) {
+		fp->attention = 1;
+		wake_up(&fp->attn_wait);
+	}
+
+	if (rq) {
+		if (irb->scsw.dstat & DEV_STAT_UNIT_CHECK)
+			rq->rc = -EIO;
+		else
+			/* Normal end. Copy residual count. */
+			rq->rescnt = irb->scsw.count;
+	}
+	return RAW3270_IO_DONE;
+}
+
+/*
+ * Process reads from fullscreen 3270.
+ */
+static ssize_t
+fs3270_read(struct file *filp, char *data, size_t count, loff_t *off)
+{
+	struct fs3270 *fp;
+	struct raw3270_request *rq;
+	struct idal_buffer *ib;
+	int rc;
+	
+	if (count == 0 || count > 65535)
+		return -EINVAL;
+	fp = filp->private_data;
+	if (!fp)
+		return -ENODEV;
+	ib = idal_buffer_alloc(count, 0);
+	if (!ib)
+		return -ENOMEM;
+	rq = raw3270_request_alloc(0);
+	if (!IS_ERR(rq)) {
+		if (fp->read_command == 0 && fp->write_command != 0)
+			fp->read_command = 6;
+		raw3270_request_set_cmd(rq, fp->read_command ? : 2);
+		raw3270_request_set_idal(rq, ib);
+		wait_event(fp->attn_wait, fp->attention);
+		rc = fs3270_do_io(&fp->view, rq);
+		if (rc == 0 && idal_buffer_to_user(ib, data, count))
+			rc = -EFAULT;
+		raw3270_request_free(rq);
+	} else
+		rc = PTR_ERR(rq);
+	idal_buffer_free(ib);
+	return rc;
+}
+
+/*
+ * Process writes to fullscreen 3270.
+ */
+static ssize_t
+fs3270_write(struct file *filp, const char *data, size_t count, loff_t *off)
+{
+	struct fs3270 *fp;
+	struct raw3270_request *rq;
+	struct idal_buffer *ib;
+	int write_command;
+	int rc;
+
+	fp = filp->private_data;
+	if (!fp)
+		return -ENODEV;
+	ib = idal_buffer_alloc(count, 0);
+	if (!ib)
+		return -ENOMEM;
+	rq = raw3270_request_alloc(0);
+	if (!IS_ERR(rq)) {
+		if (idal_buffer_from_user(ib, data, count) == 0) {
+			write_command = fp->write_command ? : 1;
+			if (write_command == 5)
+				write_command = 13;
+			raw3270_request_set_cmd(rq, write_command);
+			raw3270_request_set_idal(rq, ib);
+			rc = fs3270_do_io(&fp->view, rq);
+		} else
+			rc = -EFAULT;
+		raw3270_request_free(rq);
+	} else
+		rc = PTR_ERR(rq);
+	idal_buffer_free(ib);
+	return rc;
+}
+
+/*
+ * process ioctl commands for the tube driver
+ */
+static int
+fs3270_ioctl(struct inode *inode, struct file *filp,
+	     unsigned int cmd, unsigned long arg)
+{
+	struct fs3270 *fp;
+	struct raw3270_iocb iocb;
+	int rc;
+
+	fp = filp->private_data;
+	if (!fp)
+		return -ENODEV;
+	rc = 0;
+	switch (cmd) {
+	case TUBICMD:
+		fp->read_command = arg;
+		break;
+	case TUBOCMD:
+		fp->write_command = arg;
+		break;
+	case TUBGETI:
+		rc = put_user(fp->read_command, (char *) arg);
+		break;
+	case TUBGETO:
+		rc = put_user(fp->write_command,(char *) arg);
+		break;
+	case TUBGETMOD:
+		iocb.model = fp->view.model;
+		iocb.line_cnt = fp->view.rows;
+		iocb.col_cnt = fp->view.cols;
+		iocb.pf_cnt = 24;
+		iocb.re_cnt = 20;
+		iocb.map = 0;
+		if (copy_to_user((char *) arg, &iocb,
+				 sizeof(struct raw3270_iocb)))
+			rc = -EFAULT;
+		break;
+	}
+	return rc;
+}
+
+/*
+ * Allocate tty3270 structure.
+ */
+static struct fs3270 *
+fs3270_alloc_view(void)
+{
+	struct fs3270 *fp;
+
+	fp = (struct fs3270 *) kmalloc(sizeof(struct fs3270),GFP_KERNEL);
+	if (!fp)
+		return ERR_PTR(-ENOMEM);
+	memset(fp, 0, sizeof(struct fs3270));
+	fp->clear = raw3270_request_alloc(0);
+	if (!IS_ERR(fp->clear)) {
+		kfree(fp);
+		return ERR_PTR(-ENOMEM);
+	}
+	return fp;
+}
+
+/*
+ * Free tty3270 structure.
+ */
+static void
+fs3270_free_view(struct raw3270_view *view)
+{
+	raw3270_request_free(((struct fs3270 *) view)->clear);
+	kfree(view);
+}
+
+/*
+ * Unlink fs3270 data structure from filp.
+ */
+static void
+fs3270_release(struct raw3270_view *view)
+{
+}
+
+/* View to a 3270 device. Can be console, tty or fullscreen. */
+struct raw3270_fn fs3270_fn = {
+	.activate = fs3270_activate,
+	.deactivate = fs3270_deactivate,
+	.intv = (void *) fs3270_irq,
+	.release = fs3270_release,
+	.free = fs3270_free_view
+};
+
+/*
+ * This routine is called whenever a 3270 fullscreen device is opened.
+ */
+static int
+fs3270_open(struct inode *inode, struct file *filp)
+{
+	struct fs3270 *fp;
+	int minor, rc;
+
+	if (imajor(filp->f_dentry->d_inode) != IBM_FS3270_MAJOR)
+		return -ENODEV;
+	minor = iminor(filp->f_dentry->d_inode);
+	/* Check if some other program is already using fullscreen mode. */
+	fp = (struct fs3270 *) raw3270_find_view(&fs3270_fn, minor);
+	if (!IS_ERR(fp)) {
+		raw3270_put_view(&fp->view);
+		return -EBUSY;
+	}
+	/* Allocate fullscreen view structure. */
+	fp = fs3270_alloc_view();
+	if (IS_ERR(fp))
+		return PTR_ERR(fp);
+
+	init_waitqueue_head(&fp->attn_wait);
+	fp->fs_pid = current->pid;
+	rc = raw3270_add_view(&fp->view, &fs3270_fn, minor);
+	if (rc) {
+		fs3270_free_view(&fp->view);
+		return rc;
+	}
+
+	rc = raw3270_activate_view(&fp->view);
+	if (rc) {
+		raw3270_del_view(&fp->view);
+		return rc;
+	}
+	filp->private_data = fp;
+	return 0;
+}
+
+/*
+ * This routine is called when the 3270 tty is closed. We wait
+ * for the remaining request to be completed. Then we clean up.
+ */
+static int
+fs3270_close(struct inode *inode, struct file *filp)
+{
+	struct fs3270 *fp;
+
+	fp = filp->private_data;
+	filp->private_data = 0;
+	if (fp)
+		raw3270_del_view(&fp->view);
+	return 0;
+}
+
+static struct file_operations fs3270_fops = {
+	.owner	 = THIS_MODULE,		/* owner */
+	.read	 = fs3270_read,		/* read */
+	.write	 = fs3270_write,	/* write */
+	.ioctl	 = fs3270_ioctl,	/* ioctl */
+	.open	 = fs3270_open,		/* open */
+	.release = fs3270_close,	/* release */
+};
+
+/*
+ * 3270 fullscreen driver initialization.
+ */
+static int __init
+fs3270_init(void)
+{
+	int rc;
+
+	rc = register_chrdev(IBM_FS3270_MAJOR, "fs3270", &fs3270_fops);
+	if (rc) {
+		printk(KERN_ERR "fs3270 can't get major number %d: errno %d\n",
+		       IBM_FS3270_MAJOR, rc);
+		return rc;
+	}
+	return 0;
+}
+
+static void __exit
+fs3270_exit(void)
+{
+	unregister_chrdev(IBM_FS3270_MAJOR, "fs3270");
+}
+
+MODULE_LICENSE("GPL");
+MODULE_ALIAS_CHARDEV_MAJOR(IBM_FS3270_MAJOR);
+
+module_init(fs3270_init);
+module_exit(fs3270_exit);
diff --git a/drivers/s390/char/keyboard.c b/drivers/s390/char/keyboard.c
new file mode 100644
index 0000000..fd43d99
--- /dev/null
+++ b/drivers/s390/char/keyboard.c
@@ -0,0 +1,519 @@
+/*
+ *  drivers/s390/char/keyboard.c
+ *    ebcdic keycode functions for s390 console drivers
+ *
+ *  S390 version
+ *    Copyright (C) 2003 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *    Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com),
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/sysrq.h>
+
+#include <linux/kbd_kern.h>
+#include <linux/kbd_diacr.h>
+#include <asm/uaccess.h>
+
+#include "keyboard.h"
+
+/*
+ * Handler Tables.
+ */
+#define K_HANDLERS\
+	k_self,		k_fn,		k_spec,		k_ignore,\
+	k_dead,		k_ignore,	k_ignore,	k_ignore,\
+	k_ignore,	k_ignore,	k_ignore,	k_ignore,\
+	k_ignore,	k_ignore,	k_ignore,	k_ignore
+
+typedef void (k_handler_fn)(struct kbd_data *, unsigned char);
+static k_handler_fn K_HANDLERS;
+static k_handler_fn *k_handler[16] = { K_HANDLERS };
+
+/* maximum values each key_handler can handle */
+static const int kbd_max_vals[] = {
+	255, ARRAY_SIZE(func_table) - 1, NR_FN_HANDLER - 1, 0,
+	NR_DEAD - 1, 0, 0, 0, 0, 0, 0, 0, 0, 0
+};
+static const int KBD_NR_TYPES = ARRAY_SIZE(kbd_max_vals);
+
+static unsigned char ret_diacr[NR_DEAD] = {
+	'`', '\'', '^', '~', '"', ','
+};
+
+/*
+ * Alloc/free of kbd_data structures.
+ */
+struct kbd_data *
+kbd_alloc(void) {
+	struct kbd_data *kbd;
+	int i, len;
+
+	kbd = kmalloc(sizeof(struct kbd_data), GFP_KERNEL);
+	if (!kbd)
+		goto out;
+	memset(kbd, 0, sizeof(struct kbd_data));
+	kbd->key_maps = kmalloc(sizeof(key_maps), GFP_KERNEL);
+	if (!key_maps)
+		goto out_kbd;
+	memset(kbd->key_maps, 0, sizeof(key_maps));
+	for (i = 0; i < ARRAY_SIZE(key_maps); i++) {
+		if (key_maps[i]) {
+			kbd->key_maps[i] =
+				kmalloc(sizeof(u_short)*NR_KEYS, GFP_KERNEL);
+			if (!kbd->key_maps[i])
+				goto out_maps;
+			memcpy(kbd->key_maps[i], key_maps[i],
+			       sizeof(u_short)*NR_KEYS);
+		}
+	}
+	kbd->func_table = kmalloc(sizeof(func_table), GFP_KERNEL);
+	if (!kbd->func_table)
+		goto out_maps;
+	memset(kbd->func_table, 0, sizeof(func_table));
+	for (i = 0; i < ARRAY_SIZE(func_table); i++) {
+		if (func_table[i]) {
+			len = strlen(func_table[i]) + 1;
+			kbd->func_table[i] = kmalloc(len, GFP_KERNEL);
+			if (!kbd->func_table[i])
+				goto out_func;
+			memcpy(kbd->func_table[i], func_table[i], len);
+		}
+	}
+	kbd->fn_handler =
+		kmalloc(sizeof(fn_handler_fn *) * NR_FN_HANDLER, GFP_KERNEL);
+	if (!kbd->fn_handler)
+		goto out_func;
+	memset(kbd->fn_handler, 0, sizeof(fn_handler_fn *) * NR_FN_HANDLER);
+	kbd->accent_table =
+		kmalloc(sizeof(struct kbdiacr)*MAX_DIACR, GFP_KERNEL);
+	if (!kbd->accent_table)
+		goto out_fn_handler;
+	memcpy(kbd->accent_table, accent_table,
+	       sizeof(struct kbdiacr)*MAX_DIACR);
+	kbd->accent_table_size = accent_table_size;
+	return kbd;
+
+out_fn_handler:
+	kfree(kbd->fn_handler);
+out_func:
+	for (i = 0; i < ARRAY_SIZE(func_table); i++)
+		if (kbd->func_table[i])
+			kfree(kbd->func_table[i]);
+	kfree(kbd->func_table);
+out_maps:
+	for (i = 0; i < ARRAY_SIZE(key_maps); i++)
+		if (kbd->key_maps[i])
+			kfree(kbd->key_maps[i]);
+	kfree(kbd->key_maps);
+out_kbd:
+	kfree(kbd);
+out:
+	return 0;
+}
+
+void
+kbd_free(struct kbd_data *kbd)
+{
+	int i;
+
+	kfree(kbd->accent_table);
+	kfree(kbd->fn_handler);
+	for (i = 0; i < ARRAY_SIZE(func_table); i++)
+		if (kbd->func_table[i])
+			kfree(kbd->func_table[i]);
+	kfree(kbd->func_table);
+	for (i = 0; i < ARRAY_SIZE(key_maps); i++)
+		if (kbd->key_maps[i])
+			kfree(kbd->key_maps[i]);
+	kfree(kbd->key_maps);
+	kfree(kbd);
+}
+
+/*
+ * Generate ascii -> ebcdic translation table from kbd_data.
+ */
+void
+kbd_ascebc(struct kbd_data *kbd, unsigned char *ascebc)
+{
+	unsigned short *keymap, keysym;
+	int i, j, k;
+
+	memset(ascebc, 0x40, 256);
+	for (i = 0; i < ARRAY_SIZE(key_maps); i++) {
+		keymap = kbd->key_maps[i];
+		if (!keymap)
+			continue;
+		for (j = 0; j < NR_KEYS; j++) {
+			k = ((i & 1) << 7) + j;
+			keysym = keymap[j];
+			if (KTYP(keysym) == (KT_LATIN | 0xf0) ||
+			    KTYP(keysym) == (KT_LETTER | 0xf0))
+				ascebc[KVAL(keysym)] = k;
+			else if (KTYP(keysym) == (KT_DEAD | 0xf0))
+				ascebc[ret_diacr[KVAL(keysym)]] = k;
+		}
+	}
+}
+
+/*
+ * Generate ebcdic -> ascii translation table from kbd_data.
+ */
+void
+kbd_ebcasc(struct kbd_data *kbd, unsigned char *ebcasc)
+{
+	unsigned short *keymap, keysym;
+	int i, j, k;
+
+	memset(ebcasc, ' ', 256);
+	for (i = 0; i < ARRAY_SIZE(key_maps); i++) {
+		keymap = kbd->key_maps[i];
+		if (!keymap)
+			continue;
+		for (j = 0; j < NR_KEYS; j++) {
+			keysym = keymap[j];
+			k = ((i & 1) << 7) + j;
+			if (KTYP(keysym) == (KT_LATIN | 0xf0) ||
+			    KTYP(keysym) == (KT_LETTER | 0xf0))
+				ebcasc[k] = KVAL(keysym);
+			else if (KTYP(keysym) == (KT_DEAD | 0xf0))
+				ebcasc[k] = ret_diacr[KVAL(keysym)];
+		}
+	}
+}
+
+/*
+ * We have a combining character DIACR here, followed by the character CH.
+ * If the combination occurs in the table, return the corresponding value.
+ * Otherwise, if CH is a space or equals DIACR, return DIACR.
+ * Otherwise, conclude that DIACR was not combining after all,
+ * queue it and return CH.
+ */
+static unsigned char
+handle_diacr(struct kbd_data *kbd, unsigned char ch)
+{
+	int i, d;
+
+	d = kbd->diacr;
+	kbd->diacr = 0;
+
+	for (i = 0; i < kbd->accent_table_size; i++) {
+		if (kbd->accent_table[i].diacr == d &&
+		    kbd->accent_table[i].base == ch)
+			return kbd->accent_table[i].result;
+	}
+
+	if (ch == ' ' || ch == d)
+		return d;
+
+	kbd_put_queue(kbd->tty, d);
+	return ch;
+}
+
+/*
+ * Handle dead key.
+ */
+static void
+k_dead(struct kbd_data *kbd, unsigned char value)
+{
+	value = ret_diacr[value];
+	kbd->diacr = (kbd->diacr ? handle_diacr(kbd, value) : value);
+}
+
+/*
+ * Normal character handler.
+ */
+static void
+k_self(struct kbd_data *kbd, unsigned char value)
+{
+	if (kbd->diacr)
+		value = handle_diacr(kbd, value);
+	kbd_put_queue(kbd->tty, value);
+}
+
+/*
+ * Special key handlers
+ */
+static void
+k_ignore(struct kbd_data *kbd, unsigned char value)
+{
+}
+
+/*
+ * Function key handler.
+ */
+static void
+k_fn(struct kbd_data *kbd, unsigned char value)
+{
+	if (kbd->func_table[value])
+		kbd_puts_queue(kbd->tty, kbd->func_table[value]);
+}
+
+static void
+k_spec(struct kbd_data *kbd, unsigned char value)
+{
+	if (value >= NR_FN_HANDLER)
+		return;
+	if (kbd->fn_handler[value])
+		kbd->fn_handler[value](kbd);
+}
+
+/*
+ * Put utf8 character to tty flip buffer.
+ * UTF-8 is defined for words of up to 31 bits,
+ * but we need only 16 bits here
+ */
+static void
+to_utf8(struct tty_struct *tty, ushort c) 
+{
+	if (c < 0x80)
+		/*  0******* */
+		kbd_put_queue(tty, c);
+	else if (c < 0x800) {
+		/* 110***** 10****** */
+		kbd_put_queue(tty, 0xc0 | (c >> 6));
+		kbd_put_queue(tty, 0x80 | (c & 0x3f));
+	} else {
+		/* 1110**** 10****** 10****** */
+		kbd_put_queue(tty, 0xe0 | (c >> 12));
+		kbd_put_queue(tty, 0x80 | ((c >> 6) & 0x3f));
+		kbd_put_queue(tty, 0x80 | (c & 0x3f));
+	}
+}
+
+/*
+ * Process keycode.
+ */
+void
+kbd_keycode(struct kbd_data *kbd, unsigned int keycode)
+{
+	unsigned short keysym;
+	unsigned char type, value;
+
+	if (!kbd || !kbd->tty)
+		return;
+
+	if (keycode >= 384)
+		keysym = kbd->key_maps[5][keycode - 384];
+	else if (keycode >= 256)
+		keysym = kbd->key_maps[4][keycode - 256];
+	else if (keycode >= 128)
+		keysym = kbd->key_maps[1][keycode - 128];
+	else
+		keysym = kbd->key_maps[0][keycode];
+
+	type = KTYP(keysym);
+	if (type >= 0xf0) {
+		type -= 0xf0;
+		if (type == KT_LETTER)
+			type = KT_LATIN;
+		value = KVAL(keysym);
+#ifdef CONFIG_MAGIC_SYSRQ	       /* Handle the SysRq Hack */
+		if (kbd->sysrq) {
+			if (kbd->sysrq == K(KT_LATIN, '-')) {
+				kbd->sysrq = 0;
+				handle_sysrq(value, 0, kbd->tty);
+				return;
+			}
+			if (value == '-') {
+				kbd->sysrq = K(KT_LATIN, '-');
+				return;
+			}
+			/* Incomplete sysrq sequence. */
+			(*k_handler[KTYP(kbd->sysrq)])(kbd, KVAL(kbd->sysrq));
+			kbd->sysrq = 0;
+		} else if ((type == KT_LATIN && value == '^') ||
+			   (type == KT_DEAD && ret_diacr[value] == '^')) {
+			kbd->sysrq = K(type, value);
+			return;
+		}
+#endif
+		(*k_handler[type])(kbd, value);
+	} else
+		to_utf8(kbd->tty, keysym);
+}
+
+/*
+ * Ioctl stuff.
+ */
+static int
+do_kdsk_ioctl(struct kbd_data *kbd, struct kbentry __user *user_kbe,
+	      int cmd, int perm)
+{
+	struct kbentry tmp;
+	ushort *key_map, val, ov;
+
+	if (copy_from_user(&tmp, user_kbe, sizeof(struct kbentry)))
+		return -EFAULT;
+#if NR_KEYS < 256
+	if (tmp.kb_index >= NR_KEYS)
+		return -EINVAL;
+#endif
+#if MAX_NR_KEYMAPS < 256
+	if (tmp.kb_table >= MAX_NR_KEYMAPS)
+		return -EINVAL;	
+#endif
+
+	switch (cmd) {
+	case KDGKBENT:
+		key_map = kbd->key_maps[tmp.kb_table];
+		if (key_map) {
+		    val = U(key_map[tmp.kb_index]);
+		    if (KTYP(val) >= KBD_NR_TYPES)
+			val = K_HOLE;
+		} else
+		    val = (tmp.kb_index ? K_HOLE : K_NOSUCHMAP);
+		return put_user(val, &user_kbe->kb_value);
+	case KDSKBENT:
+		if (!perm)
+			return -EPERM;
+		if (!tmp.kb_index && tmp.kb_value == K_NOSUCHMAP) {
+			/* disallocate map */
+			key_map = kbd->key_maps[tmp.kb_table];
+			if (key_map) {
+			    kbd->key_maps[tmp.kb_table] = 0;
+			    kfree(key_map);
+			}
+			break;
+		}
+
+		if (KTYP(tmp.kb_value) >= KBD_NR_TYPES)
+			return -EINVAL;
+		if (KVAL(tmp.kb_value) > kbd_max_vals[KTYP(tmp.kb_value)])
+			return -EINVAL;
+
+		if (!(key_map = kbd->key_maps[tmp.kb_table])) {
+			int j;
+
+			key_map = (ushort *) kmalloc(sizeof(plain_map),
+						     GFP_KERNEL);
+			if (!key_map)
+				return -ENOMEM;
+			kbd->key_maps[tmp.kb_table] = key_map;
+			for (j = 0; j < NR_KEYS; j++)
+				key_map[j] = U(K_HOLE);
+		}
+		ov = U(key_map[tmp.kb_index]);
+		if (tmp.kb_value == ov)
+			break;	/* nothing to do */
+		/*
+		 * Attention Key.
+		 */
+		if (((ov == K_SAK) || (tmp.kb_value == K_SAK)) &&
+		    !capable(CAP_SYS_ADMIN))
+			return -EPERM;
+		key_map[tmp.kb_index] = U(tmp.kb_value);
+		break;
+	}
+	return 0;
+}
+
+static int
+do_kdgkb_ioctl(struct kbd_data *kbd, struct kbsentry __user *u_kbs,
+	       int cmd, int perm)
+{
+	unsigned char kb_func;
+	char *p;
+	int len;
+
+	/* Get u_kbs->kb_func. */
+	if (get_user(kb_func, &u_kbs->kb_func))
+		return -EFAULT;
+#if MAX_NR_FUNC < 256
+	if (kb_func >= MAX_NR_FUNC)
+		return -EINVAL;
+#endif
+
+	switch (cmd) {
+	case KDGKBSENT:
+		p = kbd->func_table[kb_func];
+		if (p) {
+			len = strlen(p);
+			if (len >= sizeof(u_kbs->kb_string))
+				len = sizeof(u_kbs->kb_string) - 1;
+			if (copy_to_user(u_kbs->kb_string, p, len))
+				return -EFAULT;
+		} else
+			len = 0;
+		if (put_user('\0', u_kbs->kb_string + len))
+			return -EFAULT;
+		break;
+	case KDSKBSENT:
+		if (!perm)
+			return -EPERM;
+		len = strnlen_user(u_kbs->kb_string,
+				   sizeof(u_kbs->kb_string) - 1);
+		p = kmalloc(len, GFP_KERNEL);
+		if (!p)
+			return -ENOMEM;
+		if (copy_from_user(p, u_kbs->kb_string, len)) {
+			kfree(p);
+			return -EFAULT;
+		}
+		p[len] = 0;
+		if (kbd->func_table[kb_func])
+			kfree(kbd->func_table[kb_func]);
+		kbd->func_table[kb_func] = p;
+		break;
+	}
+	return 0;
+}
+
+int
+kbd_ioctl(struct kbd_data *kbd, struct file *file,
+	  unsigned int cmd, unsigned long arg)
+{
+	struct kbdiacrs __user *a;
+	void __user *argp;
+	int ct, perm;
+
+	argp = (void __user *)arg;
+
+	/*
+	 * To have permissions to do most of the vt ioctls, we either have
+	 * to be the owner of the tty, or have CAP_SYS_TTY_CONFIG.
+	 */
+	perm = current->signal->tty == kbd->tty || capable(CAP_SYS_TTY_CONFIG);
+	switch (cmd) {
+	case KDGKBTYPE:
+		return put_user(KB_101, (char __user *)argp);
+	case KDGKBENT:
+	case KDSKBENT:
+		return do_kdsk_ioctl(kbd, argp, cmd, perm);
+	case KDGKBSENT:
+	case KDSKBSENT:
+		return do_kdgkb_ioctl(kbd, argp, cmd, perm);
+	case KDGKBDIACR:
+		a = argp;
+
+		if (put_user(kbd->accent_table_size, &a->kb_cnt))
+			return -EFAULT;
+		ct = kbd->accent_table_size;
+		if (copy_to_user(a->kbdiacr, kbd->accent_table,
+				 ct * sizeof(struct kbdiacr)))
+			return -EFAULT;
+		return 0;
+	case KDSKBDIACR:
+		a = argp;
+		if (!perm)
+			return -EPERM;
+		if (get_user(ct, &a->kb_cnt))
+			return -EFAULT;
+		if (ct >= MAX_DIACR)
+			return -EINVAL;
+		kbd->accent_table_size = ct;
+		if (copy_from_user(kbd->accent_table, a->kbdiacr,
+				   ct * sizeof(struct kbdiacr)))
+			return -EFAULT;
+		return 0;
+	default:
+		return -ENOIOCTLCMD;
+	}
+}
+
+EXPORT_SYMBOL(kbd_ioctl);
+EXPORT_SYMBOL(kbd_ascebc);
+EXPORT_SYMBOL(kbd_free);
+EXPORT_SYMBOL(kbd_alloc);
+EXPORT_SYMBOL(kbd_keycode);
diff --git a/drivers/s390/char/keyboard.h b/drivers/s390/char/keyboard.h
new file mode 100644
index 0000000..3b4da5a
--- /dev/null
+++ b/drivers/s390/char/keyboard.h
@@ -0,0 +1,57 @@
+/*
+ *  drivers/s390/char/keyboard.h
+ *    ebcdic keycode functions for s390 console drivers
+ *
+ *    Copyright (C) 2003 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *    Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com),
+ */
+
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/keyboard.h>
+
+#define NR_FN_HANDLER	20
+
+struct kbd_data;
+
+typedef void (fn_handler_fn)(struct kbd_data *);
+
+/*
+ * FIXME: explain key_maps tricks.
+ */
+
+struct kbd_data {
+	struct tty_struct *tty;
+	unsigned short **key_maps;
+	char **func_table;
+	fn_handler_fn **fn_handler;
+	struct kbdiacr *accent_table;
+	unsigned int accent_table_size;
+	unsigned char diacr;
+	unsigned short sysrq;
+};
+
+struct kbd_data *kbd_alloc(void);
+void kbd_free(struct kbd_data *);
+void kbd_ascebc(struct kbd_data *, unsigned char *);
+
+void kbd_keycode(struct kbd_data *, unsigned int);
+int kbd_ioctl(struct kbd_data *, struct file *, unsigned int, unsigned long);
+
+/*
+ * Helper Functions.
+ */
+extern inline void
+kbd_put_queue(struct tty_struct *tty, int ch)
+{
+	tty_insert_flip_char(tty, ch, 0);
+	tty_schedule_flip(tty);
+}
+
+extern inline void
+kbd_puts_queue(struct tty_struct *tty, char *cp)
+{
+	while (*cp)
+		tty_insert_flip_char(tty, *cp++, 0);
+	tty_schedule_flip(tty);
+}
diff --git a/drivers/s390/char/monreader.c b/drivers/s390/char/monreader.c
new file mode 100644
index 0000000..5fd3ad8
--- /dev/null
+++ b/drivers/s390/char/monreader.c
@@ -0,0 +1,662 @@
+/*
+ * drivers/s390/char/monreader.c
+ *
+ * Character device driver for reading z/VM *MONITOR service records.
+ *
+ * Copyright (C) 2004 IBM Corporation, IBM Deutschland Entwicklung GmbH.
+ *
+ * Author: Gerald Schaefer <geraldsc@de.ibm.com>
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/miscdevice.h>
+#include <linux/ctype.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <asm/uaccess.h>
+#include <asm/ebcdic.h>
+#include <asm/extmem.h>
+#include <linux/poll.h>
+#include "../net/iucv.h"
+
+
+//#define MON_DEBUG			/* Debug messages on/off */
+
+#define MON_NAME "monreader"
+
+#define P_INFO(x...)	printk(KERN_INFO MON_NAME " info: " x)
+#define P_ERROR(x...)	printk(KERN_ERR MON_NAME " error: " x)
+#define P_WARNING(x...)	printk(KERN_WARNING MON_NAME " warning: " x)
+
+#ifdef MON_DEBUG
+#define P_DEBUG(x...)   printk(KERN_DEBUG MON_NAME " debug: " x)
+#else
+#define P_DEBUG(x...)   do {} while (0)
+#endif
+
+#define MON_COLLECT_SAMPLE 0x80
+#define MON_COLLECT_EVENT  0x40
+#define MON_SERVICE	   "*MONITOR"
+#define MON_IN_USE	   0x01
+#define MON_MSGLIM	   255
+
+static char mon_dcss_name[9] = "MONDCSS\0";
+
+struct mon_msg {
+	u32 pos;
+	u32 mca_offset;
+	iucv_MessagePending local_eib;
+	char msglim_reached;
+	char replied_msglim;
+};
+
+struct mon_private {
+	u16 pathid;
+	iucv_handle_t iucv_handle;
+	struct mon_msg *msg_array[MON_MSGLIM];
+	unsigned int   write_index;
+	unsigned int   read_index;
+	atomic_t msglim_count;
+	atomic_t read_ready;
+	atomic_t iucv_connected;
+	atomic_t iucv_severed;
+};
+
+static unsigned long mon_in_use = 0;
+
+static unsigned long mon_dcss_start;
+static unsigned long mon_dcss_end;
+
+static DECLARE_WAIT_QUEUE_HEAD(mon_read_wait_queue);
+static DECLARE_WAIT_QUEUE_HEAD(mon_conn_wait_queue);
+
+static u8 iucv_host[8] = {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
+
+static u8 user_data_connect[16] = {
+	/* Version code, must be 0x01 for shared mode */
+	0x01,
+	/* what to collect */
+	MON_COLLECT_SAMPLE | MON_COLLECT_EVENT,
+	/* DCSS name in EBCDIC, 8 bytes padded with blanks */
+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+};
+
+static u8 user_data_sever[16] = {
+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+};
+
+
+/******************************************************************************
+ *                             helper functions                               *
+ *****************************************************************************/
+/*
+ * Create the 8 bytes EBCDIC DCSS segment name from
+ * an ASCII name, incl. padding
+ */
+static inline void
+dcss_mkname(char *ascii_name, char *ebcdic_name)
+{
+	int i;
+
+	for (i = 0; i < 8; i++) {
+		if (ascii_name[i] == '\0')
+			break;
+		ebcdic_name[i] = toupper(ascii_name[i]);
+	};
+	for (; i < 8; i++)
+		ebcdic_name[i] = ' ';
+	ASCEBC(ebcdic_name, 8);
+}
+
+/*
+ * print appropriate error message for segment_load()/segment_type()
+ * return code
+ */
+static void
+mon_segment_warn(int rc, char* seg_name)
+{
+	switch (rc) {
+	case -ENOENT:
+		P_WARNING("cannot load/query segment %s, does not exist\n",
+			  seg_name);
+		break;
+	case -ENOSYS:
+		P_WARNING("cannot load/query segment %s, not running on VM\n",
+			  seg_name);
+		break;
+	case -EIO:
+		P_WARNING("cannot load/query segment %s, hardware error\n",
+			  seg_name);
+		break;
+	case -ENOTSUPP:
+		P_WARNING("cannot load/query segment %s, is a multi-part "
+			  "segment\n", seg_name);
+		break;
+	case -ENOSPC:
+		P_WARNING("cannot load/query segment %s, overlaps with "
+			  "storage\n", seg_name);
+		break;
+	case -EBUSY:
+		P_WARNING("cannot load/query segment %s, overlaps with "
+			  "already loaded dcss\n", seg_name);
+		break;
+	case -EPERM:
+		P_WARNING("cannot load/query segment %s, already loaded in "
+			  "incompatible mode\n", seg_name);
+		break;
+	case -ENOMEM:
+		P_WARNING("cannot load/query segment %s, out of memory\n",
+			  seg_name);
+		break;
+	case -ERANGE:
+		P_WARNING("cannot load/query segment %s, exceeds kernel "
+			  "mapping range\n", seg_name);
+		break;
+	default:
+		P_WARNING("cannot load/query segment %s, return value %i\n",
+			  seg_name, rc);
+		break;
+	}
+}
+
+static inline unsigned long
+mon_mca_start(struct mon_msg *monmsg)
+{
+	return monmsg->local_eib.ln1msg1.iprmmsg1_u32;
+}
+
+static inline unsigned long
+mon_mca_end(struct mon_msg *monmsg)
+{
+	return monmsg->local_eib.ln1msg2.ipbfln1f;
+}
+
+static inline u8
+mon_mca_type(struct mon_msg *monmsg, u8 index)
+{
+	return *((u8 *) mon_mca_start(monmsg) + monmsg->mca_offset + index);
+}
+
+static inline u32
+mon_mca_size(struct mon_msg *monmsg)
+{
+	return mon_mca_end(monmsg) - mon_mca_start(monmsg) + 1;
+}
+
+static inline u32
+mon_rec_start(struct mon_msg *monmsg)
+{
+	return *((u32 *) (mon_mca_start(monmsg) + monmsg->mca_offset + 4));
+}
+
+static inline u32
+mon_rec_end(struct mon_msg *monmsg)
+{
+	return *((u32 *) (mon_mca_start(monmsg) + monmsg->mca_offset + 8));
+}
+
+static inline int
+mon_check_mca(struct mon_msg *monmsg)
+{
+	if ((mon_rec_end(monmsg) <= mon_rec_start(monmsg)) ||
+	    (mon_rec_start(monmsg) < mon_dcss_start) ||
+	    (mon_rec_end(monmsg) > mon_dcss_end) ||
+	    (mon_mca_type(monmsg, 0) == 0) ||
+	    (mon_mca_size(monmsg) % 12 != 0) ||
+	    (mon_mca_end(monmsg) <= mon_mca_start(monmsg)) ||
+	    (mon_mca_end(monmsg) > mon_dcss_end) ||
+	    (mon_mca_start(monmsg) < mon_dcss_start) ||
+	    ((mon_mca_type(monmsg, 1) == 0) && (mon_mca_type(monmsg, 2) == 0)))
+	{
+		P_DEBUG("READ, IGNORED INVALID MCA\n\n");
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static inline int
+mon_send_reply(struct mon_msg *monmsg, struct mon_private *monpriv)
+{
+	u8 prmmsg[8];
+	int rc;
+
+	P_DEBUG("read, REPLY: pathid = 0x%04X, msgid = 0x%08X, trgcls = "
+		"0x%08X\n\n",
+		monmsg->local_eib.ippathid, monmsg->local_eib.ipmsgid,
+		monmsg->local_eib.iptrgcls);
+	rc = iucv_reply_prmmsg(monmsg->local_eib.ippathid,
+				monmsg->local_eib.ipmsgid,
+				monmsg->local_eib.iptrgcls,
+				0, prmmsg);
+	atomic_dec(&monpriv->msglim_count);
+	if (likely(!monmsg->msglim_reached)) {
+		monmsg->pos = 0;
+		monmsg->mca_offset = 0;
+		monpriv->read_index = (monpriv->read_index + 1) %
+				      MON_MSGLIM;
+		atomic_dec(&monpriv->read_ready);
+	} else
+		monmsg->replied_msglim = 1;
+	if (rc) {
+		P_ERROR("read, IUCV reply failed with rc = %i\n\n", rc);
+		return -EIO;
+	}
+	return 0;
+}
+
+static inline struct mon_private *
+mon_alloc_mem(void)
+{
+	int i,j;
+	struct mon_private *monpriv;
+
+	monpriv = kmalloc(sizeof(struct mon_private), GFP_KERNEL);
+	if (!monpriv) {
+		P_ERROR("no memory for monpriv\n");
+		return NULL;
+	}
+	memset(monpriv, 0, sizeof(struct mon_private));
+	for (i = 0; i < MON_MSGLIM; i++) {
+		monpriv->msg_array[i] = kmalloc(sizeof(struct mon_msg),
+						    GFP_KERNEL);
+		if (!monpriv->msg_array[i]) {
+			P_ERROR("open, no memory for msg_array\n");
+			for (j = 0; j < i; j++)
+				kfree(monpriv->msg_array[j]);
+			return NULL;
+		}
+		memset(monpriv->msg_array[i], 0, sizeof(struct mon_msg));
+	}
+	return monpriv;
+}
+
+static inline void
+mon_read_debug(struct mon_msg *monmsg, struct mon_private *monpriv)
+{
+#ifdef MON_DEBUG
+	u8 msg_type[2], mca_type;
+	unsigned long records_len;
+
+	records_len = mon_rec_end(monmsg) - mon_rec_start(monmsg) + 1;
+
+	memcpy(msg_type, &monmsg->local_eib.iptrgcls, 2);
+	EBCASC(msg_type, 2);
+	mca_type = mon_mca_type(monmsg, 0);
+	EBCASC(&mca_type, 1);
+
+	P_DEBUG("read, mon_read_index = %i, mon_write_index = %i\n",
+		monpriv->read_index, monpriv->write_index);
+	P_DEBUG("read, pathid = 0x%04X, msgid = 0x%08X, trgcls = 0x%08X\n",
+		monmsg->local_eib.ippathid, monmsg->local_eib.ipmsgid,
+		monmsg->local_eib.iptrgcls);
+	P_DEBUG("read, msg_type = '%c%c', mca_type = '%c' / 0x%X / 0x%X\n",
+		msg_type[0], msg_type[1], mca_type ? mca_type : 'X',
+		mon_mca_type(monmsg, 1), mon_mca_type(monmsg, 2));
+	P_DEBUG("read, MCA: start = 0x%lX, end = 0x%lX\n",
+		mon_mca_start(monmsg), mon_mca_end(monmsg));
+	P_DEBUG("read, REC: start = 0x%X, end = 0x%X, len = %lu\n\n",
+		mon_rec_start(monmsg), mon_rec_end(monmsg), records_len);
+	if (mon_mca_size(monmsg) > 12)
+		P_DEBUG("READ, MORE THAN ONE MCA\n\n");
+#endif
+}
+
+static inline void
+mon_next_mca(struct mon_msg *monmsg)
+{
+	if (likely((mon_mca_size(monmsg) - monmsg->mca_offset) == 12))
+		return;
+	P_DEBUG("READ, NEXT MCA\n\n");
+	monmsg->mca_offset += 12;
+	monmsg->pos = 0;
+}
+
+static inline struct mon_msg *
+mon_next_message(struct mon_private *monpriv)
+{
+	struct mon_msg *monmsg;
+
+	if (!atomic_read(&monpriv->read_ready))
+		return NULL;
+	monmsg = monpriv->msg_array[monpriv->read_index];
+	if (unlikely(monmsg->replied_msglim)) {
+		monmsg->replied_msglim = 0;
+		monmsg->msglim_reached = 0;
+		monmsg->pos = 0;
+		monmsg->mca_offset = 0;
+		P_WARNING("read, message limit reached\n");
+		monpriv->read_index = (monpriv->read_index + 1) %
+				      MON_MSGLIM;
+		atomic_dec(&monpriv->read_ready);
+		return ERR_PTR(-EOVERFLOW);
+	}
+	return monmsg;
+}
+
+
+/******************************************************************************
+ *                               IUCV handler                                 *
+ *****************************************************************************/
+static void
+mon_iucv_ConnectionComplete(iucv_ConnectionComplete *eib, void *pgm_data)
+{
+	struct mon_private *monpriv = (struct mon_private *) pgm_data;
+
+	P_DEBUG("IUCV connection completed\n");
+	P_DEBUG("IUCV ACCEPT (from *MONITOR): Version = 0x%02X, Event = "
+		"0x%02X, Sample = 0x%02X\n",
+		eib->ipuser[0], eib->ipuser[1], eib->ipuser[2]);
+	atomic_set(&monpriv->iucv_connected, 1);
+	wake_up(&mon_conn_wait_queue);
+}
+
+static void
+mon_iucv_ConnectionSevered(iucv_ConnectionSevered *eib, void *pgm_data)
+{
+	struct mon_private *monpriv = (struct mon_private *) pgm_data;
+
+	P_ERROR("IUCV connection severed with rc = 0x%X\n",
+		(u8) eib->ipuser[0]);
+	atomic_set(&monpriv->iucv_severed, 1);
+	wake_up(&mon_conn_wait_queue);
+	wake_up_interruptible(&mon_read_wait_queue);
+}
+
+static void
+mon_iucv_MessagePending(iucv_MessagePending *eib, void *pgm_data)
+{
+	struct mon_private *monpriv = (struct mon_private *) pgm_data;
+
+	P_DEBUG("IUCV message pending\n");
+	memcpy(&monpriv->msg_array[monpriv->write_index]->local_eib, eib,
+	       sizeof(iucv_MessagePending));
+	if (atomic_inc_return(&monpriv->msglim_count) == MON_MSGLIM) {
+		P_WARNING("IUCV message pending, message limit (%i) reached\n",
+			  MON_MSGLIM);
+		monpriv->msg_array[monpriv->write_index]->msglim_reached = 1;
+	}
+	monpriv->write_index = (monpriv->write_index + 1) % MON_MSGLIM;
+	atomic_inc(&monpriv->read_ready);
+	wake_up_interruptible(&mon_read_wait_queue);
+}
+
+static iucv_interrupt_ops_t mon_iucvops = {
+	.ConnectionComplete = mon_iucv_ConnectionComplete,
+	.ConnectionSevered  = mon_iucv_ConnectionSevered,
+	.MessagePending     = mon_iucv_MessagePending,
+};
+
+/******************************************************************************
+ *                               file operations                              *
+ *****************************************************************************/
+static int
+mon_open(struct inode *inode, struct file *filp)
+{
+	int rc, i;
+	struct mon_private *monpriv;
+
+	/*
+	 * only one user allowed
+	 */
+	if (test_and_set_bit(MON_IN_USE, &mon_in_use))
+		return -EBUSY;
+
+	monpriv = mon_alloc_mem();
+	if (!monpriv)
+		return -ENOMEM;
+
+	/*
+	 * Register with IUCV and connect to *MONITOR service
+	 */
+	monpriv->iucv_handle = iucv_register_program("my_monreader    ",
+							MON_SERVICE,
+							NULL,
+							&mon_iucvops,
+							monpriv);
+	if (!monpriv->iucv_handle) {
+		P_ERROR("failed to register with iucv driver\n");
+		rc = -EIO;
+		goto out_error;
+	}
+	P_INFO("open, registered with IUCV\n");
+
+	rc = iucv_connect(&monpriv->pathid, MON_MSGLIM, user_data_connect,
+			  MON_SERVICE, iucv_host, IPRMDATA, NULL, NULL,
+			  monpriv->iucv_handle, NULL);
+	if (rc) {
+		P_ERROR("iucv connection to *MONITOR failed with "
+			"IPUSER SEVER code = %i\n", rc);
+		rc = -EIO;
+		goto out_unregister;
+	}
+	/*
+	 * Wait for connection confirmation
+	 */
+	wait_event(mon_conn_wait_queue,
+		   atomic_read(&monpriv->iucv_connected) ||
+		   atomic_read(&monpriv->iucv_severed));
+	if (atomic_read(&monpriv->iucv_severed)) {
+		atomic_set(&monpriv->iucv_severed, 0);
+		atomic_set(&monpriv->iucv_connected, 0);
+		rc = -EIO;
+		goto out_unregister;
+	}
+	P_INFO("open, established connection to *MONITOR service\n\n");
+	filp->private_data = monpriv;
+	return nonseekable_open(inode, filp);
+
+out_unregister:
+	iucv_unregister_program(monpriv->iucv_handle);
+out_error:
+	for (i = 0; i < MON_MSGLIM; i++)
+		kfree(monpriv->msg_array[i]);
+	kfree(monpriv);
+	clear_bit(MON_IN_USE, &mon_in_use);
+	return rc;
+}
+
+static int
+mon_close(struct inode *inode, struct file *filp)
+{
+	int rc, i;
+	struct mon_private *monpriv = filp->private_data;
+
+	/*
+	 * Close IUCV connection and unregister
+	 */
+	rc = iucv_sever(monpriv->pathid, user_data_sever);
+	if (rc)
+		P_ERROR("close, iucv_sever failed with rc = %i\n", rc);
+	else
+		P_INFO("close, terminated connection to *MONITOR service\n");
+
+	rc = iucv_unregister_program(monpriv->iucv_handle);
+	if (rc)
+		P_ERROR("close, iucv_unregister failed with rc = %i\n", rc);
+	else
+		P_INFO("close, unregistered with IUCV\n");
+
+	atomic_set(&monpriv->iucv_severed, 0);
+	atomic_set(&monpriv->iucv_connected, 0);
+	atomic_set(&monpriv->read_ready, 0);
+	atomic_set(&monpriv->msglim_count, 0);
+	monpriv->write_index  = 0;
+	monpriv->read_index   = 0;
+
+	for (i = 0; i < MON_MSGLIM; i++)
+		kfree(monpriv->msg_array[i]);
+	kfree(monpriv);
+	clear_bit(MON_IN_USE, &mon_in_use);
+	return 0;
+}
+
+static ssize_t
+mon_read(struct file *filp, char __user *data, size_t count, loff_t *ppos)
+{
+	struct mon_private *monpriv = filp->private_data;
+	struct mon_msg *monmsg;
+	int ret;
+	u32 mce_start;
+
+	monmsg = mon_next_message(monpriv);
+	if (IS_ERR(monmsg))
+		return PTR_ERR(monmsg);
+
+	if (!monmsg) {
+		if (filp->f_flags & O_NONBLOCK)
+			return -EAGAIN;
+		ret = wait_event_interruptible(mon_read_wait_queue,
+					atomic_read(&monpriv->read_ready) ||
+					atomic_read(&monpriv->iucv_severed));
+		if (ret)
+			return ret;
+		if (unlikely(atomic_read(&monpriv->iucv_severed)))
+			return -EIO;
+		monmsg = monpriv->msg_array[monpriv->read_index];
+	}
+
+	if (!monmsg->pos) {
+		monmsg->pos = mon_mca_start(monmsg) + monmsg->mca_offset;
+		mon_read_debug(monmsg, monpriv);
+	}
+	if (mon_check_mca(monmsg))
+		goto reply;
+
+	/* read monitor control element (12 bytes) first */
+	mce_start = mon_mca_start(monmsg) + monmsg->mca_offset;
+	if ((monmsg->pos >= mce_start) && (monmsg->pos < mce_start + 12)) {
+		count = min(count, (size_t) mce_start + 12 - monmsg->pos);
+		ret = copy_to_user(data, (void *) (unsigned long) monmsg->pos,
+				   count);
+		if (ret)
+			return -EFAULT;
+		monmsg->pos += count;
+		if (monmsg->pos == mce_start + 12)
+			monmsg->pos = mon_rec_start(monmsg);
+		goto out_copy;
+	}
+
+	/* read records */
+	if (monmsg->pos <= mon_rec_end(monmsg)) {
+		count = min(count, (size_t) mon_rec_end(monmsg) - monmsg->pos
+					    + 1);
+		ret = copy_to_user(data, (void *) (unsigned long) monmsg->pos,
+				   count);
+		if (ret)
+			return -EFAULT;
+		monmsg->pos += count;
+		if (monmsg->pos > mon_rec_end(monmsg))
+			mon_next_mca(monmsg);
+		goto out_copy;
+	}
+reply:
+	ret = mon_send_reply(monmsg, monpriv);
+	return ret;
+
+out_copy:
+	*ppos += count;
+	return count;
+}
+
+static unsigned int
+mon_poll(struct file *filp, struct poll_table_struct *p)
+{
+	struct mon_private *monpriv = filp->private_data;
+
+	poll_wait(filp, &mon_read_wait_queue, p);
+	if (unlikely(atomic_read(&monpriv->iucv_severed)))
+		return POLLERR;
+	if (atomic_read(&monpriv->read_ready))
+		return POLLIN | POLLRDNORM;
+	return 0;
+}
+
+static struct file_operations mon_fops = {
+	.owner   = THIS_MODULE,
+	.open    = &mon_open,
+	.release = &mon_close,
+	.read    = &mon_read,
+	.poll    = &mon_poll,
+};
+
+static struct miscdevice mon_dev = {
+	.name       = "monreader",
+	.devfs_name = "monreader",
+	.fops       = &mon_fops,
+	.minor      = MISC_DYNAMIC_MINOR,
+};
+
+/******************************************************************************
+ *                              module init/exit                              *
+ *****************************************************************************/
+static int __init
+mon_init(void)
+{
+	int rc;
+
+	if (!MACHINE_IS_VM) {
+		P_ERROR("not running under z/VM, driver not loaded\n");
+		return -ENODEV;
+	}
+
+	rc = segment_type(mon_dcss_name);
+	if (rc < 0) {
+		mon_segment_warn(rc, mon_dcss_name);
+		return rc;
+	}
+	if (rc != SEG_TYPE_SC) {
+		P_ERROR("segment %s has unsupported type, should be SC\n",
+			mon_dcss_name);
+		return -EINVAL;
+	}
+
+	rc = segment_load(mon_dcss_name, SEGMENT_SHARED,
+			  &mon_dcss_start, &mon_dcss_end);
+	if (rc < 0) {
+		mon_segment_warn(rc, mon_dcss_name);
+		return -EINVAL;
+	}
+	dcss_mkname(mon_dcss_name, &user_data_connect[8]);
+
+	rc = misc_register(&mon_dev);
+	if (rc < 0 ) {
+		P_ERROR("misc_register failed, rc = %i\n", rc);
+		goto out;
+	}
+	P_INFO("Loaded segment %s from %p to %p, size = %lu Byte\n",
+		mon_dcss_name, (void *) mon_dcss_start, (void *) mon_dcss_end,
+		mon_dcss_end - mon_dcss_start + 1);
+	return 0;
+
+out:
+	segment_unload(mon_dcss_name);
+	return rc;
+}
+
+static void __exit
+mon_exit(void)
+{
+	segment_unload(mon_dcss_name);
+	WARN_ON(misc_deregister(&mon_dev) != 0);
+	return;
+}
+
+
+module_init(mon_init);
+module_exit(mon_exit);
+
+module_param_string(mondcss, mon_dcss_name, 9, 0444);
+MODULE_PARM_DESC(mondcss, "Name of DCSS segment to be used for *MONITOR "
+		 "service, max. 8 chars. Default is MONDCSS");
+
+MODULE_AUTHOR("Gerald Schaefer <geraldsc@de.ibm.com>");
+MODULE_DESCRIPTION("Character device driver for reading z/VM "
+		   "monitor service records.");
+MODULE_LICENSE("GPL");
diff --git a/drivers/s390/char/raw3270.c b/drivers/s390/char/raw3270.c
new file mode 100644
index 0000000..8e16a97
--- /dev/null
+++ b/drivers/s390/char/raw3270.c
@@ -0,0 +1,1335 @@
+/*
+ *  drivers/s390/char/raw3270.c
+ *    IBM/3270 Driver - core functions.
+ *
+ *  Author(s):
+ *    Original 3270 Code for 2.4 written by Richard Hitt (UTS Global)
+ *    Rewritten for 2.5 by Martin Schwidefsky <schwidefsky@de.ibm.com>
+ *	-- Copyright (C) 2003 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ */
+
+#include <linux/config.h>
+#include <linux/bootmem.h>
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/wait.h>
+
+#include <asm/ccwdev.h>
+#include <asm/cio.h>
+#include <asm/ebcdic.h>
+
+#include "raw3270.h"
+
+/* The main 3270 data structure. */
+struct raw3270 {
+	struct list_head list;
+	struct ccw_device *cdev;
+	int minor;
+
+	short model, rows, cols;
+	unsigned long flags;
+
+	struct list_head req_queue;	/* Request queue. */
+	struct list_head view_list;	/* List of available views. */
+	struct raw3270_view *view;	/* Active view. */
+
+	struct timer_list timer;	/* Device timer. */
+
+	unsigned char *ascebc;		/* ascii -> ebcdic table */
+};
+
+/* raw3270->flags */
+#define RAW3270_FLAGS_14BITADDR	0	/* 14-bit buffer addresses */
+#define RAW3270_FLAGS_BUSY	1	/* Device busy, leave it alone */
+#define RAW3270_FLAGS_ATTN	2	/* Device sent an ATTN interrupt */
+#define RAW3270_FLAGS_READY	4	/* Device is useable by views */
+#define RAW3270_FLAGS_CONSOLE	8	/* Device is the console. */
+
+/* Semaphore to protect global data of raw3270 (devices, views, etc). */
+static DECLARE_MUTEX(raw3270_sem);
+
+/* List of 3270 devices. */
+static struct list_head raw3270_devices = LIST_HEAD_INIT(raw3270_devices);
+
+/*
+ * Flag to indicate if the driver has been registered. Some operations
+ * like waiting for the end of i/o need to be done differently as long
+ * as the kernel is still starting up (console support).
+ */
+static int raw3270_registered;
+
+/* Module parameters */
+static int tubxcorrect = 0;
+module_param(tubxcorrect, bool, 0);
+
+/*
+ * Wait queue for device init/delete, view delete.
+ */
+DECLARE_WAIT_QUEUE_HEAD(raw3270_wait_queue);
+
+/*
+ * Encode array for 12 bit 3270 addresses.
+ */
+unsigned char raw3270_ebcgraf[64] =	{
+	0x40, 0xc1, 0xc2, 0xc3, 0xc4, 0xc5, 0xc6, 0xc7,
+	0xc8, 0xc9, 0x4a, 0x4b, 0x4c, 0x4d, 0x4e, 0x4f,
+	0x50, 0xd1, 0xd2, 0xd3, 0xd4, 0xd5, 0xd6, 0xd7,
+	0xd8, 0xd9, 0x5a, 0x5b, 0x5c, 0x5d, 0x5e, 0x5f,
+	0x60, 0x61, 0xe2, 0xe3, 0xe4, 0xe5, 0xe6, 0xe7,
+	0xe8, 0xe9, 0x6a, 0x6b, 0x6c, 0x6d, 0x6e, 0x6f,
+	0xf0, 0xf1, 0xf2, 0xf3, 0xf4, 0xf5, 0xf6, 0xf7,
+	0xf8, 0xf9, 0x7a, 0x7b, 0x7c, 0x7d, 0x7e, 0x7f
+};
+
+void
+raw3270_buffer_address(struct raw3270 *rp, char *cp, unsigned short addr)
+{
+	if (test_bit(RAW3270_FLAGS_14BITADDR, &rp->flags)) {
+		cp[0] = (addr >> 8) & 0x3f;
+		cp[1] = addr & 0xff;
+	} else {
+		cp[0] = raw3270_ebcgraf[(addr >> 6) & 0x3f];
+		cp[1] = raw3270_ebcgraf[addr & 0x3f];
+	}
+}
+
+/*
+ * Allocate a new 3270 ccw request
+ */
+struct raw3270_request *
+raw3270_request_alloc(size_t size)
+{
+	struct raw3270_request *rq;
+
+	/* Allocate request structure */
+	rq = kmalloc(sizeof(struct raw3270_request), GFP_KERNEL | GFP_DMA);
+	if (!rq)
+		return ERR_PTR(-ENOMEM);
+	memset(rq, 0, sizeof(struct raw3270_request));
+
+	/* alloc output buffer. */
+	if (size > 0) {
+		rq->buffer = kmalloc(size, GFP_KERNEL | GFP_DMA);
+		if (!rq->buffer) {
+			kfree(rq);
+			return ERR_PTR(-ENOMEM);
+		}
+	}
+	rq->size = size;
+	INIT_LIST_HEAD(&rq->list);
+
+	/*
+	 * Setup ccw.
+	 */
+	rq->ccw.cda = __pa(rq->buffer);
+	rq->ccw.flags = CCW_FLAG_SLI;
+
+	return rq;
+}
+
+#ifdef CONFIG_TN3270_CONSOLE
+/*
+ * Allocate a new 3270 ccw request from bootmem. Only works very
+ * early in the boot process. Only con3270.c should be using this.
+ */
+struct raw3270_request *
+raw3270_request_alloc_bootmem(size_t size)
+{
+	struct raw3270_request *rq;
+
+	rq = alloc_bootmem_low(sizeof(struct raw3270));
+	if (!rq)
+		return ERR_PTR(-ENOMEM);
+	memset(rq, 0, sizeof(struct raw3270_request));
+
+	/* alloc output buffer. */
+	if (size > 0) {
+		rq->buffer = alloc_bootmem_low(size);
+		if (!rq->buffer) {
+			free_bootmem((unsigned long) rq,
+				     sizeof(struct raw3270));
+			return ERR_PTR(-ENOMEM);
+		}
+	}
+	rq->size = size;
+	INIT_LIST_HEAD(&rq->list);
+
+	/*
+	 * Setup ccw.
+	 */
+	rq->ccw.cda = __pa(rq->buffer);
+	rq->ccw.flags = CCW_FLAG_SLI;
+
+	return rq;
+}
+#endif
+
+/*
+ * Free 3270 ccw request
+ */
+void
+raw3270_request_free (struct raw3270_request *rq)
+{
+	if (rq->buffer)
+		kfree(rq->buffer);
+	kfree(rq);
+}
+
+/*
+ * Reset request to initial state.
+ */
+void
+raw3270_request_reset(struct raw3270_request *rq)
+{
+	BUG_ON(!list_empty(&rq->list));
+	rq->ccw.cmd_code = 0;
+	rq->ccw.count = 0;
+	rq->ccw.cda = __pa(rq->buffer);
+	rq->ccw.flags = CCW_FLAG_SLI;
+	rq->rescnt = 0;
+	rq->rc = 0;
+}
+
+/*
+ * Set command code to ccw of a request.
+ */
+void
+raw3270_request_set_cmd(struct raw3270_request *rq, u8 cmd)
+{
+	rq->ccw.cmd_code = cmd;
+}
+
+/*
+ * Add data fragment to output buffer.
+ */
+int
+raw3270_request_add_data(struct raw3270_request *rq, void *data, size_t size)
+{
+	if (size + rq->ccw.count > rq->size)
+		return -E2BIG;
+	memcpy(rq->buffer + rq->ccw.count, data, size);
+	rq->ccw.count += size;
+	return 0;
+}
+
+/*
+ * Set address/length pair to ccw of a request.
+ */
+void
+raw3270_request_set_data(struct raw3270_request *rq, void *data, size_t size)
+{
+	rq->ccw.cda = __pa(data);
+	rq->ccw.count = size;
+}
+
+/*
+ * Set idal buffer to ccw of a request.
+ */
+void
+raw3270_request_set_idal(struct raw3270_request *rq, struct idal_buffer *ib)
+{
+	rq->ccw.cda = __pa(ib->data);
+	rq->ccw.count = ib->size;
+	rq->ccw.flags |= CCW_FLAG_IDA;
+}
+
+/*
+ * Stop running ccw.
+ */
+static int
+raw3270_halt_io_nolock(struct raw3270 *rp, struct raw3270_request *rq)
+{
+	int retries;
+	int rc;
+
+	if (raw3270_request_final(rq))
+		return 0;
+	/* Check if interrupt has already been processed */
+	for (retries = 0; retries < 5; retries++) {
+		if (retries < 2)
+			rc = ccw_device_halt(rp->cdev, (long) rq);
+		else
+			rc = ccw_device_clear(rp->cdev, (long) rq);
+		if (rc == 0)
+			break;		/* termination successful */
+	}
+	return rc;
+}
+
+static int
+raw3270_halt_io(struct raw3270 *rp, struct raw3270_request *rq)
+{
+	unsigned long flags;
+	int rc;
+
+	spin_lock_irqsave(get_ccwdev_lock(rp->cdev), flags);
+	rc = raw3270_halt_io_nolock(rp, rq);
+	spin_unlock_irqrestore(get_ccwdev_lock(rp->cdev), flags);
+	return rc;
+}
+
+/*
+ * Add the request to the request queue, try to start it if the
+ * 3270 device is idle. Return without waiting for end of i/o.
+ */
+static int
+__raw3270_start(struct raw3270 *rp, struct raw3270_view *view,
+		struct raw3270_request *rq)
+{
+	rq->view = view;
+	raw3270_get_view(view);
+	if (list_empty(&rp->req_queue) &&
+	    !test_bit(RAW3270_FLAGS_BUSY, &rp->flags)) {
+		/* No other requests are on the queue. Start this one. */
+		rq->rc = ccw_device_start(rp->cdev, &rq->ccw,
+					       (unsigned long) rq, 0, 0);
+		if (rq->rc) {
+			raw3270_put_view(view);
+			return rq->rc;
+		}
+	}
+	list_add_tail(&rq->list, &rp->req_queue);
+	return 0;
+}
+
+int
+raw3270_start(struct raw3270_view *view, struct raw3270_request *rq)
+{
+	unsigned long flags;
+	struct raw3270 *rp;
+	int rc;
+
+	spin_lock_irqsave(get_ccwdev_lock(view->dev->cdev), flags);
+	rp = view->dev;
+	if (!rp || rp->view != view)
+		rc = -EACCES;
+	else if (!test_bit(RAW3270_FLAGS_READY, &rp->flags))
+		rc = -ENODEV;
+	else
+		rc =  __raw3270_start(rp, view, rq);
+	spin_unlock_irqrestore(get_ccwdev_lock(view->dev->cdev), flags);
+	return rc;
+}
+
+int
+raw3270_start_irq(struct raw3270_view *view, struct raw3270_request *rq)
+{
+	struct raw3270 *rp;
+
+	rp = view->dev;
+	rq->view = view;
+	raw3270_get_view(view);
+	list_add_tail(&rq->list, &rp->req_queue);
+	return 0;
+}
+
+/*
+ * 3270 interrupt routine, called from the ccw_device layer
+ */
+static void
+raw3270_irq (struct ccw_device *cdev, unsigned long intparm, struct irb *irb)
+{
+	struct raw3270 *rp;
+	struct raw3270_view *view;
+	struct raw3270_request *rq;
+	int rc;
+
+	rp = (struct raw3270 *) cdev->dev.driver_data;
+	if (!rp)
+		return;
+	rq = (struct raw3270_request *) intparm;
+	view = rq ? rq->view : rp->view;
+
+	if (IS_ERR(irb))
+		rc = RAW3270_IO_RETRY;
+	else if (irb->scsw.fctl & SCSW_FCTL_HALT_FUNC) {
+		rq->rc = -EIO;
+		rc = RAW3270_IO_DONE;
+	} else if (irb->scsw.dstat ==  (DEV_STAT_CHN_END | DEV_STAT_DEV_END |
+					DEV_STAT_UNIT_EXCEP)) {
+		/* Handle CE-DE-UE and subsequent UDE */
+		set_bit(RAW3270_FLAGS_BUSY, &rp->flags);
+		rc = RAW3270_IO_BUSY;
+	} else if (test_bit(RAW3270_FLAGS_BUSY, &rp->flags)) {
+		/* Wait for UDE if busy flag is set. */
+		if (irb->scsw.dstat & DEV_STAT_DEV_END) {
+			clear_bit(RAW3270_FLAGS_BUSY, &rp->flags);
+			/* Got it, now retry. */
+			rc = RAW3270_IO_RETRY;
+		} else
+			rc = RAW3270_IO_BUSY;
+	} else if (view)
+		rc = view->fn->intv(view, rq, irb);
+	else
+		rc = RAW3270_IO_DONE;
+
+	switch (rc) {
+	case RAW3270_IO_DONE:
+		break;
+	case RAW3270_IO_BUSY:
+		/* 
+		 * Intervention required by the operator. We have to wait
+		 * for unsolicited device end.
+		 */
+		return;
+	case RAW3270_IO_RETRY:
+		if (!rq)
+			break;
+		rq->rc = ccw_device_start(rp->cdev, &rq->ccw,
+					  (unsigned long) rq, 0, 0);
+		if (rq->rc == 0)
+			return;	/* Sucessfully restarted. */
+		break;
+	case RAW3270_IO_STOP:
+		if (!rq)
+			break;
+		raw3270_halt_io_nolock(rp, rq);
+		rq->rc = -EIO;
+		break;
+	default:
+		BUG();
+	}
+	if (rq) {
+		BUG_ON(list_empty(&rq->list));
+		/* The request completed, remove from queue and do callback. */
+		list_del_init(&rq->list);
+		if (rq->callback)
+			rq->callback(rq, rq->callback_data);
+		/* Do put_device for get_device in raw3270_start. */
+		raw3270_put_view(view);
+	}
+	/*
+	 * Try to start each request on request queue until one is
+	 * started successful.
+	 */
+	while (!list_empty(&rp->req_queue)) {
+		rq = list_entry(rp->req_queue.next,struct raw3270_request,list);
+		rq->rc = ccw_device_start(rp->cdev, &rq->ccw,
+					  (unsigned long) rq, 0, 0);
+		if (rq->rc == 0)
+			break;
+		/* Start failed. Remove request and do callback. */
+		list_del_init(&rq->list);
+		if (rq->callback)
+			rq->callback(rq, rq->callback_data);
+		/* Do put_device for get_device in raw3270_start. */
+		raw3270_put_view(view);
+	}
+}
+
+/*
+ * Size sensing.
+ */
+
+struct raw3270_ua {	/* Query Reply structure for Usable Area */
+	struct {	/* Usable Area Query Reply Base */
+		short l;	/* Length of this structured field */
+		char  sfid;	/* 0x81 if Query Reply */
+		char  qcode;	/* 0x81 if Usable Area */
+		char  flags0;
+		char  flags1;
+		short w;	/* Width of usable area */
+		short h;	/* Heigth of usavle area */
+		char  units;	/* 0x00:in; 0x01:mm */
+		int   xr;
+		int   yr;
+		char  aw;
+		char  ah;
+		short buffsz;	/* Character buffer size, bytes */
+		char  xmin;
+		char  ymin;
+		char  xmax;
+		char  ymax;
+	} __attribute__ ((packed)) uab;
+	struct {	/* Alternate Usable Area Self-Defining Parameter */
+		char  l;	/* Length of this Self-Defining Parm */
+		char  sdpid;	/* 0x02 if Alternate Usable Area */
+		char  res;
+		char  auaid;	/* 0x01 is Id for the A U A */
+		short wauai;	/* Width of AUAi */
+		short hauai;	/* Height of AUAi */
+		char  auaunits;	/* 0x00:in, 0x01:mm */
+		int   auaxr;
+		int   auayr;
+		char  awauai;
+		char  ahauai;
+	} __attribute__ ((packed)) aua;
+} __attribute__ ((packed));
+
+static unsigned char raw3270_init_data[256];
+static struct raw3270_request raw3270_init_request;
+static struct diag210 raw3270_init_diag210;
+static DECLARE_MUTEX(raw3270_init_sem);
+
+static int
+raw3270_init_irq(struct raw3270_view *view, struct raw3270_request *rq,
+		 struct irb *irb)
+{
+	/*
+	 * Unit-Check Processing:
+	 * Expect Command Reject or Intervention Required.
+	 */
+	if (irb->scsw.dstat & DEV_STAT_UNIT_CHECK) {
+		/* Request finished abnormally. */
+		if (irb->ecw[0] & SNS0_INTERVENTION_REQ) {
+			set_bit(RAW3270_FLAGS_BUSY, &view->dev->flags);
+			return RAW3270_IO_BUSY;
+		}
+	}
+	if (rq) {
+		if (irb->scsw.dstat & DEV_STAT_UNIT_CHECK) {
+			if (irb->ecw[0] & SNS0_CMD_REJECT)
+				rq->rc = -EOPNOTSUPP;
+			else
+				rq->rc = -EIO;
+		} else
+			/* Request finished normally. Copy residual count. */
+			rq->rescnt = irb->scsw.count;
+	}
+	if (irb->scsw.dstat & DEV_STAT_ATTENTION) {
+		set_bit(RAW3270_FLAGS_ATTN, &view->dev->flags);
+		wake_up(&raw3270_wait_queue);
+	}
+	return RAW3270_IO_DONE;
+}
+
+static struct raw3270_fn raw3270_init_fn = {
+	.intv = raw3270_init_irq
+};
+
+static struct raw3270_view raw3270_init_view = {
+	.fn = &raw3270_init_fn
+};
+
+/*
+ * raw3270_wait/raw3270_wait_interruptible/__raw3270_wakeup
+ * Wait for end of request. The request must have been started
+ * with raw3270_start, rc = 0. The device lock may NOT have been
+ * released between calling raw3270_start and raw3270_wait.
+ */
+static void
+raw3270_wake_init(struct raw3270_request *rq, void *data)
+{
+	wake_up((wait_queue_head_t *) data);
+}
+
+/*
+ * Special wait function that can cope with console initialization.
+ */
+static int
+raw3270_start_init(struct raw3270 *rp, struct raw3270_view *view,
+		   struct raw3270_request *rq)
+{
+	unsigned long flags;
+	wait_queue_head_t wq;
+	int rc;
+
+#ifdef CONFIG_TN3270_CONSOLE
+	if (raw3270_registered == 0) {
+		spin_lock_irqsave(get_ccwdev_lock(view->dev->cdev), flags);
+		rq->callback = 0;
+		rc = __raw3270_start(rp, view, rq);
+		if (rc == 0)
+			while (!raw3270_request_final(rq)) {
+				wait_cons_dev();
+				barrier();
+			}
+		spin_unlock_irqrestore(get_ccwdev_lock(view->dev->cdev), flags);
+		return rq->rc;
+	}
+#endif
+	init_waitqueue_head(&wq);
+	rq->callback = raw3270_wake_init;
+	rq->callback_data = &wq;
+	spin_lock_irqsave(get_ccwdev_lock(view->dev->cdev), flags);
+	rc = __raw3270_start(rp, view, rq);
+	spin_unlock_irqrestore(get_ccwdev_lock(view->dev->cdev), flags);
+	if (rc)
+		return rc;
+	/* Now wait for the completion. */
+	rc = wait_event_interruptible(wq, raw3270_request_final(rq));
+	if (rc == -ERESTARTSYS) {	/* Interrupted by a signal. */
+		raw3270_halt_io(view->dev, rq);
+		/* No wait for the halt to complete. */
+		wait_event(wq, raw3270_request_final(rq));
+		return -ERESTARTSYS;
+	}
+	return rq->rc;
+}
+
+static int
+__raw3270_size_device_vm(struct raw3270 *rp)
+{
+	int rc, model;
+
+	raw3270_init_diag210.vrdcdvno = 
+		_ccw_device_get_device_number(rp->cdev);
+	raw3270_init_diag210.vrdclen = sizeof(struct diag210);
+	rc = diag210(&raw3270_init_diag210);
+	if (rc)
+		return rc;
+	model = raw3270_init_diag210.vrdccrmd;
+	switch (model) {
+	case 2:
+		rp->model = model;
+		rp->rows = 24;
+		rp->cols = 80;
+		break;
+	case 3:
+		rp->model = model;
+		rp->rows = 32;
+		rp->cols = 80;
+		break;
+	case 4:
+		rp->model = model;
+		rp->rows = 43;
+		rp->cols = 80;
+		break;
+	case 5:
+		rp->model = model;
+		rp->rows = 27;
+		rp->cols = 132;
+		break;
+	default:
+		printk(KERN_WARNING "vrdccrmd is 0x%.8x\n", model);
+		rc = -EOPNOTSUPP;
+		break;
+	}
+	return rc;
+}
+
+static int
+__raw3270_size_device(struct raw3270 *rp)
+{
+	static const unsigned char wbuf[] =
+		{ 0x00, 0x07, 0x01, 0xff, 0x03, 0x00, 0x81 };
+	struct raw3270_ua *uap;
+	unsigned short count;
+	int rc;
+
+	/*
+	 * To determine the size of the 3270 device we need to do:
+	 * 1) send a 'read partition' data stream to the device
+	 * 2) wait for the attn interrupt that preceeds the query reply
+	 * 3) do a read modified to get the query reply
+	 * To make things worse we have to cope with intervention
+	 * required (3270 device switched to 'stand-by') and command
+	 * rejects (old devices that can't do 'read partition').
+	 */
+	memset(&raw3270_init_request, 0, sizeof(raw3270_init_request));
+	memset(raw3270_init_data, 0, sizeof(raw3270_init_data));
+	/* Store 'read partition' data stream to raw3270_init_data */
+	memcpy(raw3270_init_data, wbuf, sizeof(wbuf));
+	INIT_LIST_HEAD(&raw3270_init_request.list);
+	raw3270_init_request.ccw.cmd_code = TC_WRITESF;
+	raw3270_init_request.ccw.flags = CCW_FLAG_SLI;
+	raw3270_init_request.ccw.count = sizeof(wbuf);
+	raw3270_init_request.ccw.cda = (__u32) __pa(raw3270_init_data);
+
+	rc = raw3270_start_init(rp, &raw3270_init_view, &raw3270_init_request);
+	if (rc) {
+		/* Check error cases: -ERESTARTSYS, -EIO and -EOPNOTSUPP */
+		if (rc == -EOPNOTSUPP && MACHINE_IS_VM)
+			return __raw3270_size_device_vm(rp);
+		return rc;
+	}
+
+	/* Wait for attention interrupt. */
+#ifdef CONFIG_TN3270_CONSOLE
+	if (raw3270_registered == 0) {
+		unsigned long flags;
+
+		spin_lock_irqsave(get_ccwdev_lock(rp->cdev), flags);
+		while (!test_and_clear_bit(RAW3270_FLAGS_ATTN, &rp->flags))
+			wait_cons_dev();
+		spin_unlock_irqrestore(get_ccwdev_lock(rp->cdev), flags);
+	} else
+#endif
+		rc = wait_event_interruptible(raw3270_wait_queue,
+			test_and_clear_bit(RAW3270_FLAGS_ATTN, &rp->flags));
+	if (rc)
+		return rc;
+
+	/*
+	 * The device accepted the 'read partition' command. Now
+	 * set up a read ccw and issue it.
+	 */
+	raw3270_init_request.ccw.cmd_code = TC_READMOD;
+	raw3270_init_request.ccw.flags = CCW_FLAG_SLI;
+	raw3270_init_request.ccw.count = sizeof(raw3270_init_data);
+	raw3270_init_request.ccw.cda = (__u32) __pa(raw3270_init_data);
+	rc = raw3270_start_init(rp, &raw3270_init_view, &raw3270_init_request);
+	if (rc)
+		return rc;
+	/* Got a Query Reply */
+	count = sizeof(raw3270_init_data) - raw3270_init_request.rescnt;
+	uap = (struct raw3270_ua *) (raw3270_init_data + 1);
+	/* Paranoia check. */
+	if (raw3270_init_data[0] != 0x88 || uap->uab.qcode != 0x81)
+		return -EOPNOTSUPP;
+	/* Copy rows/columns of default Usable Area */
+	rp->rows = uap->uab.h;
+	rp->cols = uap->uab.w;
+	/* Check for 14 bit addressing */
+	if ((uap->uab.flags0 & 0x0d) == 0x01)
+		set_bit(RAW3270_FLAGS_14BITADDR, &rp->flags);
+	/* Check for Alternate Usable Area */
+	if (uap->uab.l == sizeof(struct raw3270_ua) &&
+	    uap->aua.sdpid == 0x02) {
+		rp->rows = uap->aua.hauai;
+		rp->cols = uap->aua.wauai;
+	}
+	return 0;
+}
+
+static int
+raw3270_size_device(struct raw3270 *rp)
+{
+	int rc;
+
+	down(&raw3270_init_sem);
+	rp->view = &raw3270_init_view;
+	raw3270_init_view.dev = rp;
+	rc = __raw3270_size_device(rp);
+	raw3270_init_view.dev = 0;
+	rp->view = 0;
+	up(&raw3270_init_sem);
+	if (rc == 0) {	/* Found something. */
+		/* Try to find a model. */
+		rp->model = 0;
+		if (rp->rows == 24 && rp->cols == 80)
+			rp->model = 2;
+		if (rp->rows == 32 && rp->cols == 80)
+			rp->model = 3;
+		if (rp->rows == 43 && rp->cols == 80)
+			rp->model = 4;
+		if (rp->rows == 27 && rp->cols == 132)
+			rp->model = 5;
+	}
+	return rc;
+}
+
+static int
+raw3270_reset_device(struct raw3270 *rp)
+{
+	int rc;
+
+	down(&raw3270_init_sem);
+	memset(&raw3270_init_request, 0, sizeof(raw3270_init_request));
+	memset(raw3270_init_data, 0, sizeof(raw3270_init_data));
+	/* Store reset data stream to raw3270_init_data/raw3270_init_request */
+	raw3270_init_data[0] = TW_KR;
+	INIT_LIST_HEAD(&raw3270_init_request.list);
+	raw3270_init_request.ccw.cmd_code = TC_EWRITEA;
+	raw3270_init_request.ccw.flags = CCW_FLAG_SLI;
+	raw3270_init_request.ccw.count = 1;
+	raw3270_init_request.ccw.cda = (__u32) __pa(raw3270_init_data);
+	rp->view = &raw3270_init_view;
+	raw3270_init_view.dev = rp;
+	rc = raw3270_start_init(rp, &raw3270_init_view, &raw3270_init_request);
+	raw3270_init_view.dev = 0;
+	rp->view = 0;
+	up(&raw3270_init_sem);
+	return rc;
+}
+
+/*
+ * Setup new 3270 device.
+ */
+static int
+raw3270_setup_device(struct ccw_device *cdev, struct raw3270 *rp, char *ascebc)
+{
+	struct list_head *l;
+	struct raw3270 *tmp;
+	int minor;
+
+	memset(rp, 0, sizeof(struct raw3270));
+	/* Copy ebcdic -> ascii translation table. */
+	memcpy(ascebc, _ascebc, 256);
+	if (tubxcorrect) {
+		/* correct brackets and circumflex */
+		ascebc['['] = 0xad;
+		ascebc[']'] = 0xbd;
+		ascebc['^'] = 0xb0;
+	}
+	rp->ascebc = ascebc;
+
+	/* Set defaults. */
+	rp->rows = 24;
+	rp->cols = 80;
+
+	INIT_LIST_HEAD(&rp->req_queue);
+	INIT_LIST_HEAD(&rp->view_list);
+
+	/*
+	 * Add device to list and find the smallest unused minor
+	 * number for it.
+	 */
+	down(&raw3270_sem);
+	/* Keep the list sorted. */
+	minor = 0;
+	rp->minor = -1;
+	list_for_each(l, &raw3270_devices) {
+		tmp = list_entry(l, struct raw3270, list);
+		if (tmp->minor > minor) {
+			rp->minor = minor;
+			__list_add(&rp->list, l->prev, l);
+			break;
+		}
+		minor++;
+	}
+	if (rp->minor == -1 && minor < RAW3270_MAXDEVS) {
+		rp->minor = minor;
+		list_add_tail(&rp->list, &raw3270_devices);
+	}
+	up(&raw3270_sem);
+	/* No free minor number? Then give up. */
+	if (rp->minor == -1)
+		return -EUSERS;
+	rp->cdev = cdev;
+	cdev->dev.driver_data = rp;
+	cdev->handler = raw3270_irq;
+	return 0;
+}
+
+#ifdef CONFIG_TN3270_CONSOLE
+/*
+ * Setup 3270 device configured as console.
+ */
+struct raw3270 *
+raw3270_setup_console(struct ccw_device *cdev)
+{
+	struct raw3270 *rp;
+	char *ascebc;
+	int rc;
+
+	rp = (struct raw3270 *) alloc_bootmem(sizeof(struct raw3270));
+	ascebc = (char *) alloc_bootmem(256);
+	rc = raw3270_setup_device(cdev, rp, ascebc);
+	if (rc)
+		return ERR_PTR(rc);
+	set_bit(RAW3270_FLAGS_CONSOLE, &rp->flags);
+	rc = raw3270_reset_device(rp);
+	if (rc)
+		return ERR_PTR(rc);
+	rc = raw3270_size_device(rp);
+	if (rc)
+		return ERR_PTR(rc);
+	rc = raw3270_reset_device(rp);
+	if (rc)
+		return ERR_PTR(rc);
+	set_bit(RAW3270_FLAGS_READY, &rp->flags);
+	return rp;
+}
+
+void
+raw3270_wait_cons_dev(struct raw3270 *rp)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(get_ccwdev_lock(rp->cdev), flags);
+	wait_cons_dev();
+	spin_unlock_irqrestore(get_ccwdev_lock(rp->cdev), flags);
+}
+
+#endif
+
+/*
+ * Create a 3270 device structure.
+ */
+static struct raw3270 *
+raw3270_create_device(struct ccw_device *cdev)
+{
+	struct raw3270 *rp;
+	char *ascebc;
+	int rc;
+
+	rp = kmalloc(sizeof(struct raw3270), GFP_KERNEL);
+	if (!rp)
+		return ERR_PTR(-ENOMEM);
+	ascebc = kmalloc(256, GFP_KERNEL);
+	if (!ascebc) {
+		kfree(rp);
+		return ERR_PTR(-ENOMEM);
+	}
+	rc = raw3270_setup_device(cdev, rp, ascebc);
+	if (rc) {
+		kfree(rp->ascebc);
+		kfree(rp);
+		rp = ERR_PTR(rc);
+	}
+	/* Get reference to ccw_device structure. */
+	get_device(&cdev->dev);
+	return rp;
+}
+
+/*
+ * Activate a view.
+ */
+int
+raw3270_activate_view(struct raw3270_view *view)
+{
+	struct raw3270 *rp;
+	struct raw3270_view *oldview, *nv;
+	unsigned long flags;
+	int rc;
+
+	rp = view->dev;
+	if (!rp)
+		return -ENODEV;
+	spin_lock_irqsave(get_ccwdev_lock(rp->cdev), flags);
+	if (rp->view == view)
+		rc = 0;
+	else if (!test_bit(RAW3270_FLAGS_READY, &rp->flags))
+		rc = -ENODEV;
+	else {
+		oldview = 0;
+		if (rp->view) {
+			oldview = rp->view;
+			oldview->fn->deactivate(oldview);
+		}
+		rp->view = view;
+		rc = view->fn->activate(view);
+		if (rc) {
+			/* Didn't work. Try to reactivate the old view. */
+			rp->view = oldview;
+			if (!oldview || oldview->fn->activate(oldview) != 0) {
+				/* Didn't work as well. Try any other view. */
+				list_for_each_entry(nv, &rp->view_list, list)
+					if (nv != view && nv != oldview) {
+						rp->view = nv;
+						if (nv->fn->activate(nv) == 0)
+							break;
+						rp->view = 0;
+					}
+			}
+		}
+	}
+	spin_unlock_irqrestore(get_ccwdev_lock(rp->cdev), flags);
+	return rc;
+}
+
+/*
+ * Deactivate current view.
+ */
+void
+raw3270_deactivate_view(struct raw3270_view *view)
+{
+	unsigned long flags;
+	struct raw3270 *rp;
+
+	rp = view->dev;
+	if (!rp)
+		return;
+	spin_lock_irqsave(get_ccwdev_lock(rp->cdev), flags);
+	if (rp->view == view) {
+		view->fn->deactivate(view);
+		rp->view = 0;
+		/* Move deactivated view to end of list. */
+		list_del_init(&view->list);
+		list_add_tail(&view->list, &rp->view_list);
+		/* Try to activate another view. */
+		if (test_bit(RAW3270_FLAGS_READY, &rp->flags)) {
+			list_for_each_entry(view, &rp->view_list, list)
+				if (view->fn->activate(view) == 0) {
+					rp->view = view;
+					break;
+				}
+		}
+	}
+	spin_unlock_irqrestore(get_ccwdev_lock(rp->cdev), flags);
+}
+
+/*
+ * Add view to device with minor "minor".
+ */
+int
+raw3270_add_view(struct raw3270_view *view, struct raw3270_fn *fn, int minor)
+{
+	unsigned long flags;
+	struct raw3270 *rp;
+	int rc;
+
+	down(&raw3270_sem);
+	rc = -ENODEV;
+	list_for_each_entry(rp, &raw3270_devices, list) {
+		if (rp->minor != minor)
+			continue;
+		spin_lock_irqsave(get_ccwdev_lock(rp->cdev), flags);
+		if (test_bit(RAW3270_FLAGS_READY, &rp->flags)) {
+			atomic_set(&view->ref_count, 2);
+			view->dev = rp;
+			view->fn = fn;
+			view->model = rp->model;
+			view->rows = rp->rows;
+			view->cols = rp->cols;
+			view->ascebc = rp->ascebc;
+			spin_lock_init(&view->lock);
+			list_add_tail(&view->list, &rp->view_list);
+			rc = 0;
+		}
+		spin_unlock_irqrestore(get_ccwdev_lock(rp->cdev), flags);
+		break;
+	}
+	up(&raw3270_sem);
+	return rc;
+}
+
+/*
+ * Find specific view of device with minor "minor".
+ */
+struct raw3270_view *
+raw3270_find_view(struct raw3270_fn *fn, int minor)
+{
+	struct raw3270 *rp;
+	struct raw3270_view *view, *tmp;
+	unsigned long flags;
+
+	down(&raw3270_sem);
+	view = ERR_PTR(-ENODEV);
+	list_for_each_entry(rp, &raw3270_devices, list) {
+		if (rp->minor != minor)
+			continue;
+		spin_lock_irqsave(get_ccwdev_lock(rp->cdev), flags);
+		if (test_bit(RAW3270_FLAGS_READY, &rp->flags)) {
+			view = ERR_PTR(-ENOENT);
+			list_for_each_entry(tmp, &rp->view_list, list) {
+				if (tmp->fn == fn) {
+					raw3270_get_view(tmp);
+					view = tmp;
+					break;
+				}
+			}
+		}
+		spin_unlock_irqrestore(get_ccwdev_lock(rp->cdev), flags);
+		break;
+	}
+	up(&raw3270_sem);
+	return view;
+}
+
+/*
+ * Remove view from device and free view structure via call to view->fn->free.
+ */
+void
+raw3270_del_view(struct raw3270_view *view)
+{
+	unsigned long flags;
+	struct raw3270 *rp;
+	struct raw3270_view *nv;
+
+	rp = view->dev;
+	spin_lock_irqsave(get_ccwdev_lock(rp->cdev), flags);
+	if (rp->view == view) {
+		view->fn->deactivate(view);
+		rp->view = 0;
+	}
+	list_del_init(&view->list);
+	if (!rp->view && test_bit(RAW3270_FLAGS_READY, &rp->flags)) {
+		/* Try to activate another view. */
+		list_for_each_entry(nv, &rp->view_list, list) {
+			if (nv->fn->activate(view) == 0) {
+				rp->view = nv;
+				break;
+			}
+		}
+	}
+	spin_unlock_irqrestore(get_ccwdev_lock(rp->cdev), flags);
+	/* Wait for reference counter to drop to zero. */
+	atomic_dec(&view->ref_count);
+	wait_event(raw3270_wait_queue, atomic_read(&view->ref_count) == 0);
+	if (view->fn->free)
+		view->fn->free(view);
+}
+
+/*
+ * Remove a 3270 device structure.
+ */
+static void
+raw3270_delete_device(struct raw3270 *rp)
+{
+	struct ccw_device *cdev;
+
+	/* Remove from device chain. */
+	down(&raw3270_sem);
+	list_del_init(&rp->list);
+	up(&raw3270_sem);
+
+	/* Disconnect from ccw_device. */
+	cdev = rp->cdev;
+	rp->cdev = 0;
+	cdev->dev.driver_data = 0;
+	cdev->handler = 0;
+
+	/* Put ccw_device structure. */
+	put_device(&cdev->dev);
+
+	/* Now free raw3270 structure. */
+	kfree(rp->ascebc);
+	kfree(rp);
+}
+
+static int
+raw3270_probe (struct ccw_device *cdev)
+{
+	return 0;
+}
+
+/*
+ * Additional attributes for a 3270 device
+ */
+static ssize_t
+raw3270_model_show(struct device *dev, char *buf)
+{
+	return snprintf(buf, PAGE_SIZE, "%i\n",
+			((struct raw3270 *) dev->driver_data)->model);
+}
+static DEVICE_ATTR(model, 0444, raw3270_model_show, 0);
+
+static ssize_t
+raw3270_rows_show(struct device *dev, char *buf)
+{
+	return snprintf(buf, PAGE_SIZE, "%i\n",
+			((struct raw3270 *) dev->driver_data)->rows);
+}
+static DEVICE_ATTR(rows, 0444, raw3270_rows_show, 0);
+
+static ssize_t
+raw3270_columns_show(struct device *dev, char *buf)
+{
+	return snprintf(buf, PAGE_SIZE, "%i\n",
+			((struct raw3270 *) dev->driver_data)->cols);
+}
+static DEVICE_ATTR(columns, 0444, raw3270_columns_show, 0);
+
+static struct attribute * raw3270_attrs[] = {
+	&dev_attr_model.attr,
+	&dev_attr_rows.attr,
+	&dev_attr_columns.attr,
+	NULL,
+};
+
+static struct attribute_group raw3270_attr_group = {
+	.attrs = raw3270_attrs,
+};
+
+static void
+raw3270_create_attributes(struct raw3270 *rp)
+{
+	//FIXME: check return code
+	sysfs_create_group(&rp->cdev->dev.kobj, &raw3270_attr_group);
+}
+
+/*
+ * Notifier for device addition/removal
+ */
+struct raw3270_notifier {
+	struct list_head list;
+	void (*notifier)(int, int);
+};
+
+static struct list_head raw3270_notifier = LIST_HEAD_INIT(raw3270_notifier);
+
+int raw3270_register_notifier(void (*notifier)(int, int))
+{
+	struct raw3270_notifier *np;
+	struct raw3270 *rp;
+
+	np = kmalloc(sizeof(struct raw3270_notifier), GFP_KERNEL);
+	if (!np)
+		return -ENOMEM;
+	np->notifier = notifier;
+	down(&raw3270_sem);
+	list_add_tail(&np->list, &raw3270_notifier);
+	list_for_each_entry(rp, &raw3270_devices, list) {
+		get_device(&rp->cdev->dev);
+		notifier(rp->minor, 1);
+	}
+	up(&raw3270_sem);
+	return 0;
+}
+
+void raw3270_unregister_notifier(void (*notifier)(int, int))
+{
+	struct raw3270_notifier *np;
+
+	down(&raw3270_sem);
+	list_for_each_entry(np, &raw3270_notifier, list)
+		if (np->notifier == notifier) {
+			list_del(&np->list);
+			kfree(np);
+			break;
+		}
+	up(&raw3270_sem);
+}
+
+/*
+ * Set 3270 device online.
+ */
+static int
+raw3270_set_online (struct ccw_device *cdev)
+{
+	struct raw3270 *rp;
+	struct raw3270_notifier *np;
+	int rc;
+
+	rp = raw3270_create_device(cdev);
+	if (IS_ERR(rp))
+		return PTR_ERR(rp);
+	rc = raw3270_reset_device(rp);
+	if (rc)
+		return rc;
+	rc = raw3270_size_device(rp);
+	if (rc)
+		return rc;
+	rc = raw3270_reset_device(rp);
+	if (rc)
+		return rc;
+	raw3270_create_attributes(rp);
+	set_bit(RAW3270_FLAGS_READY, &rp->flags);
+	down(&raw3270_sem);
+	list_for_each_entry(np, &raw3270_notifier, list)
+		np->notifier(rp->minor, 1);
+	up(&raw3270_sem);
+	return 0;
+}
+
+/*
+ * Remove 3270 device structure.
+ */
+static void
+raw3270_remove (struct ccw_device *cdev)
+{
+	unsigned long flags;
+	struct raw3270 *rp;
+	struct raw3270_view *v;
+	struct raw3270_notifier *np;
+
+	rp = cdev->dev.driver_data;
+	clear_bit(RAW3270_FLAGS_READY, &rp->flags);
+
+	sysfs_remove_group(&cdev->dev.kobj, &raw3270_attr_group);
+
+	/* Deactivate current view and remove all views. */
+	spin_lock_irqsave(get_ccwdev_lock(cdev), flags);
+	if (rp->view) {
+		rp->view->fn->deactivate(rp->view);
+		rp->view = 0;
+	}
+	while (!list_empty(&rp->view_list)) {
+		v = list_entry(rp->view_list.next, struct raw3270_view, list);
+		if (v->fn->release)
+			v->fn->release(v);
+		spin_unlock_irqrestore(get_ccwdev_lock(cdev), flags);
+		raw3270_del_view(v);
+		spin_lock_irqsave(get_ccwdev_lock(cdev), flags);
+	}
+	spin_unlock_irqrestore(get_ccwdev_lock(cdev), flags);
+
+	down(&raw3270_sem);
+	list_for_each_entry(np, &raw3270_notifier, list)
+		np->notifier(rp->minor, 0);
+	up(&raw3270_sem);
+
+	/* Reset 3270 device. */
+	raw3270_reset_device(rp);
+	/* And finally remove it. */
+	raw3270_delete_device(rp);
+}
+
+/*
+ * Set 3270 device offline.
+ */
+static int
+raw3270_set_offline (struct ccw_device *cdev)
+{
+	struct raw3270 *rp;
+
+	rp = cdev->dev.driver_data;
+	if (test_bit(RAW3270_FLAGS_CONSOLE, &rp->flags))
+		return -EBUSY;
+	raw3270_remove(cdev);
+	return 0;
+}
+
+static struct ccw_device_id raw3270_id[] = {
+	{ CCW_DEVICE(0x3270, 0) },
+	{ CCW_DEVICE(0x3271, 0) },
+	{ CCW_DEVICE(0x3272, 0) },
+	{ CCW_DEVICE(0x3273, 0) },
+	{ CCW_DEVICE(0x3274, 0) },
+	{ CCW_DEVICE(0x3275, 0) },
+	{ CCW_DEVICE(0x3276, 0) },
+	{ CCW_DEVICE(0x3277, 0) },
+	{ CCW_DEVICE(0x3278, 0) },
+	{ CCW_DEVICE(0x3279, 0) },
+	{ CCW_DEVICE(0x3174, 0) },
+	{ /* end of list */ },
+};
+
+static struct ccw_driver raw3270_ccw_driver = {
+	.name		= "3270",
+	.owner		= THIS_MODULE,
+	.ids		= raw3270_id,
+	.probe		= &raw3270_probe,
+	.remove		= &raw3270_remove,
+	.set_online	= &raw3270_set_online,
+	.set_offline	= &raw3270_set_offline,
+};
+
+static int
+raw3270_init(void)
+{
+	struct raw3270 *rp;
+	int rc;
+
+	if (raw3270_registered)
+		return 0;
+	raw3270_registered = 1;
+	rc = ccw_driver_register(&raw3270_ccw_driver);
+	if (rc == 0) {
+		/* Create attributes for early (= console) device. */
+		down(&raw3270_sem);
+		list_for_each_entry(rp, &raw3270_devices, list) {
+			get_device(&rp->cdev->dev);
+			raw3270_create_attributes(rp);
+		}
+		up(&raw3270_sem);
+	}
+	return rc;
+}
+
+static void
+raw3270_exit(void)
+{
+	ccw_driver_unregister(&raw3270_ccw_driver);
+}
+
+MODULE_LICENSE("GPL");
+
+module_init(raw3270_init);
+module_exit(raw3270_exit);
+
+EXPORT_SYMBOL(raw3270_request_alloc);
+EXPORT_SYMBOL(raw3270_request_free);
+EXPORT_SYMBOL(raw3270_request_reset);
+EXPORT_SYMBOL(raw3270_request_set_cmd);
+EXPORT_SYMBOL(raw3270_request_add_data);
+EXPORT_SYMBOL(raw3270_request_set_data);
+EXPORT_SYMBOL(raw3270_request_set_idal);
+EXPORT_SYMBOL(raw3270_buffer_address);
+EXPORT_SYMBOL(raw3270_add_view);
+EXPORT_SYMBOL(raw3270_del_view);
+EXPORT_SYMBOL(raw3270_find_view);
+EXPORT_SYMBOL(raw3270_activate_view);
+EXPORT_SYMBOL(raw3270_deactivate_view);
+EXPORT_SYMBOL(raw3270_start);
+EXPORT_SYMBOL(raw3270_start_irq);
+EXPORT_SYMBOL(raw3270_register_notifier);
+EXPORT_SYMBOL(raw3270_unregister_notifier);
+EXPORT_SYMBOL(raw3270_wait_queue);
diff --git a/drivers/s390/char/raw3270.h b/drivers/s390/char/raw3270.h
new file mode 100644
index 0000000..ed5d4eb
--- /dev/null
+++ b/drivers/s390/char/raw3270.h
@@ -0,0 +1,274 @@
+/*
+ *  drivers/s390/char/raw3270.h
+ *    IBM/3270 Driver
+ *
+ *  Author(s):
+ *    Original 3270 Code for 2.4 written by Richard Hitt (UTS Global)
+ *    Rewritten for 2.5 by Martin Schwidefsky <schwidefsky@de.ibm.com>
+ *	-- Copyright (C) 2003 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ */
+
+#include <asm/idals.h>
+#include <asm/ioctl.h>
+
+/* ioctls for fullscreen 3270 */
+#define TUBICMD		_IO('3', 3)	/* set ccw command for fs reads. */
+#define TUBOCMD		_IO('3', 4)	/* set ccw command for fs writes. */
+#define TUBGETI		_IO('3', 7)	/* get ccw command for fs reads. */
+#define TUBGETO		_IO('3', 8)	/* get ccw command for fs writes. */
+#define TUBSETMOD	_IO('3',12)	/* FIXME: what does it do ?*/
+#define TUBGETMOD	_IO('3',13)	/* FIXME: what does it do ?*/
+
+/* Local Channel Commands */
+#define TC_WRITE	0x01		/* Write */
+#define TC_EWRITE	0x05		/* Erase write */
+#define TC_READMOD	0x06		/* Read modified */
+#define TC_EWRITEA	0x0d		/* Erase write alternate */
+#define TC_WRITESF	0x11		/* Write structured field */
+
+/* Buffer Control Orders */
+#define TO_SF		0x1d		/* Start field */
+#define TO_SBA		0x11		/* Set buffer address */
+#define TO_IC		0x13		/* Insert cursor */
+#define TO_PT		0x05		/* Program tab */
+#define TO_RA		0x3c		/* Repeat to address */
+#define TO_SFE		0x29		/* Start field extended */
+#define TO_EUA		0x12		/* Erase unprotected to address */
+#define TO_MF		0x2c		/* Modify field */
+#define TO_SA		0x28		/* Set attribute */
+
+/* Field Attribute Bytes */
+#define TF_INPUT	0x40		/* Visible input */
+#define TF_INPUTN	0x4c		/* Invisible input */
+#define TF_INMDT	0xc1		/* Visible, Set-MDT */
+#define TF_LOG		0x60
+
+/* Character Attribute Bytes */
+#define TAT_RESET	0x00
+#define TAT_FIELD	0xc0
+#define TAT_EXTHI	0x41
+#define TAT_COLOR	0x42
+#define TAT_CHARS	0x43
+#define TAT_TRANS	0x46
+
+/* Extended-Highlighting Bytes */
+#define TAX_RESET	0x00
+#define TAX_BLINK	0xf1
+#define TAX_REVER	0xf2
+#define TAX_UNDER	0xf4
+
+/* Reset value */
+#define TAR_RESET	0x00
+
+/* Color values */
+#define TAC_RESET	0x00
+#define TAC_BLUE	0xf1
+#define TAC_RED		0xf2
+#define TAC_PINK	0xf3
+#define TAC_GREEN	0xf4
+#define TAC_TURQ	0xf5
+#define TAC_YELLOW	0xf6
+#define TAC_WHITE	0xf7
+#define TAC_DEFAULT	0x00
+
+/* Write Control Characters */
+#define TW_NONE		0x40		/* No particular action */
+#define TW_KR		0xc2		/* Keyboard restore */
+#define TW_PLUSALARM	0x04		/* Add this bit for alarm */
+
+#define RAW3270_MAXDEVS	256
+
+/* For TUBGETMOD and TUBSETMOD. Should include. */
+struct raw3270_iocb {
+	short model;
+	short line_cnt;
+	short col_cnt;
+	short pf_cnt;
+	short re_cnt;
+	short map;
+};
+
+struct raw3270;
+struct raw3270_view;
+
+/* 3270 CCW request */
+struct raw3270_request {
+	struct list_head list;		/* list head for request queueing. */
+	struct raw3270_view *view;	/* view of this request */
+	struct ccw1 ccw;		/* single ccw. */
+	void *buffer;			/* output buffer. */
+	size_t size;			/* size of output buffer. */
+	int rescnt;			/* residual count from devstat. */
+	int rc;				/* return code for this request. */
+
+	/* Callback for delivering final status. */
+	void (*callback)(struct raw3270_request *, void *);
+	void *callback_data;
+};
+
+struct raw3270_request *raw3270_request_alloc(size_t size);
+struct raw3270_request *raw3270_request_alloc_bootmem(size_t size);
+void raw3270_request_free(struct raw3270_request *);
+void raw3270_request_reset(struct raw3270_request *);
+void raw3270_request_set_cmd(struct raw3270_request *, u8 cmd);
+int  raw3270_request_add_data(struct raw3270_request *, void *, size_t);
+void raw3270_request_set_data(struct raw3270_request *, void *, size_t);
+void raw3270_request_set_idal(struct raw3270_request *, struct idal_buffer *);
+
+static inline int
+raw3270_request_final(struct raw3270_request *rq)
+{
+	return list_empty(&rq->list);
+}
+
+void raw3270_buffer_address(struct raw3270 *, char *, unsigned short);
+
+/* Return value of *intv (see raw3270_fn below) can be one of the following: */
+#define RAW3270_IO_DONE		0	/* request finished */
+#define RAW3270_IO_BUSY		1	/* request still active */
+#define RAW3270_IO_RETRY	2	/* retry current request */
+#define RAW3270_IO_STOP		3	/* kill current request */
+
+/*
+ * Functions of a 3270 view.
+ */
+struct raw3270_fn {
+	int  (*activate)(struct raw3270_view *);
+	void (*deactivate)(struct raw3270_view *);
+	int  (*intv)(struct raw3270_view *,
+		     struct raw3270_request *, struct irb *);
+	void (*release)(struct raw3270_view *);
+	void (*free)(struct raw3270_view *);
+};
+
+/*
+ * View structure chaining. The raw3270_view structure is meant to
+ * be embedded at the start of the real view data structure, e.g.:
+ *   struct example {
+ *     struct raw3270_view view;
+ *     ...
+ *   };
+ */
+struct raw3270_view {
+	struct list_head list;
+	spinlock_t lock;
+	atomic_t ref_count;
+	struct raw3270 *dev;
+	struct raw3270_fn *fn;
+	unsigned int model;
+	unsigned int rows, cols;	/* # of rows & colums of the view */
+	unsigned char *ascebc;		/* ascii -> ebcdic table */
+};
+
+int raw3270_add_view(struct raw3270_view *, struct raw3270_fn *, int);
+int raw3270_activate_view(struct raw3270_view *);
+void raw3270_del_view(struct raw3270_view *);
+void raw3270_deactivate_view(struct raw3270_view *);
+struct raw3270_view *raw3270_find_view(struct raw3270_fn *, int);
+int raw3270_start(struct raw3270_view *, struct raw3270_request *);
+int raw3270_start_irq(struct raw3270_view *, struct raw3270_request *);
+
+/* Reference count inliner for view structures. */
+static inline void
+raw3270_get_view(struct raw3270_view *view)
+{
+	atomic_inc(&view->ref_count);
+}
+
+extern wait_queue_head_t raw3270_wait_queue;
+
+static inline void
+raw3270_put_view(struct raw3270_view *view)
+{
+	if (atomic_dec_return(&view->ref_count) == 0)
+		wake_up(&raw3270_wait_queue);
+}
+
+struct raw3270 *raw3270_setup_console(struct ccw_device *cdev);
+void raw3270_wait_cons_dev(struct raw3270 *);
+
+/* Notifier for device addition/removal */
+int raw3270_register_notifier(void (*notifier)(int, int));
+void raw3270_unregister_notifier(void (*notifier)(int, int));
+
+/*
+ * Little memory allocator for string objects. 
+ */
+struct string
+{
+	struct list_head list;
+	struct list_head update;
+	unsigned long size;
+	unsigned long len;
+	char string[0];
+} __attribute__ ((aligned(8)));
+
+static inline struct string *
+alloc_string(struct list_head *free_list, unsigned long len)
+{
+	struct string *cs, *tmp;
+	unsigned long size;
+
+	size = (len + 7L) & -8L;
+	list_for_each_entry(cs, free_list, list) {
+		if (cs->size < size)
+			continue;
+		if (cs->size > size + sizeof(struct string)) {
+			char *endaddr = (char *) (cs + 1) + cs->size;
+			tmp = (struct string *) (endaddr - size) - 1;
+			tmp->size = size;
+			cs->size -= size + sizeof(struct string);
+			cs = tmp;
+		} else
+			list_del(&cs->list);
+		cs->len = len;
+		INIT_LIST_HEAD(&cs->list);
+		INIT_LIST_HEAD(&cs->update);
+		return cs;
+	}
+	return 0;
+}
+
+static inline unsigned long
+free_string(struct list_head *free_list, struct string *cs)
+{
+	struct string *tmp;
+	struct list_head *p, *left;
+
+	/* Find out the left neighbour in free memory list. */
+	left = free_list;
+	list_for_each(p, free_list) {
+		if (list_entry(p, struct string, list) > cs)
+			break;
+		left = p;
+	}
+	/* Try to merge with right neighbour = next element from left. */
+	if (left->next != free_list) {
+		tmp = list_entry(left->next, struct string, list);
+		if ((char *) (cs + 1) + cs->size == (char *) tmp) {
+			list_del(&tmp->list);
+			cs->size += tmp->size + sizeof(struct string);
+		}
+	}
+	/* Try to merge with left neighbour. */
+	if (left != free_list) {
+		tmp = list_entry(left, struct string, list);
+		if ((char *) (tmp + 1) + tmp->size == (char *) cs) {
+			tmp->size += cs->size + sizeof(struct string);
+			return tmp->size;
+		}
+	}
+	__list_add(&cs->list, left, left->next);
+	return cs->size;
+}
+
+static inline void
+add_string_memory(struct list_head *free_list, void *mem, unsigned long size)
+{
+	struct string *cs;
+
+	cs = (struct string *) mem;
+	cs->size = size - sizeof(struct string);
+	free_string(free_list, cs);
+}
+
diff --git a/drivers/s390/char/sclp.c b/drivers/s390/char/sclp.c
new file mode 100644
index 0000000..ceb0e47
--- /dev/null
+++ b/drivers/s390/char/sclp.c
@@ -0,0 +1,915 @@
+/*
+ *  drivers/s390/char/sclp.c
+ *     core function to access sclp interface
+ *
+ *  S390 version
+ *    Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *    Author(s): Martin Peschke <mpeschke@de.ibm.com>
+ *		 Martin Schwidefsky <schwidefsky@de.ibm.com>
+ */
+
+#include <linux/module.h>
+#include <linux/err.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/timer.h>
+#include <linux/reboot.h>
+#include <linux/jiffies.h>
+#include <asm/types.h>
+#include <asm/s390_ext.h>
+
+#include "sclp.h"
+
+#define SCLP_HEADER		"sclp: "
+
+/* Structure for register_early_external_interrupt. */
+static ext_int_info_t ext_int_info_hwc;
+
+/* Lock to protect internal data consistency. */
+static DEFINE_SPINLOCK(sclp_lock);
+
+/* Mask of events that we can receive from the sclp interface. */
+static sccb_mask_t sclp_receive_mask;
+
+/* Mask of events that we can send to the sclp interface. */
+static sccb_mask_t sclp_send_mask;
+
+/* List of registered event listeners and senders. */
+static struct list_head sclp_reg_list;
+
+/* List of queued requests. */
+static struct list_head sclp_req_queue;
+
+/* Data for read and and init requests. */
+static struct sclp_req sclp_read_req;
+static struct sclp_req sclp_init_req;
+static char sclp_read_sccb[PAGE_SIZE] __attribute__((__aligned__(PAGE_SIZE)));
+static char sclp_init_sccb[PAGE_SIZE] __attribute__((__aligned__(PAGE_SIZE)));
+
+/* Timer for request retries. */
+static struct timer_list sclp_request_timer;
+
+/* Internal state: is the driver initialized? */
+static volatile enum sclp_init_state_t {
+	sclp_init_state_uninitialized,
+	sclp_init_state_initializing,
+	sclp_init_state_initialized
+} sclp_init_state = sclp_init_state_uninitialized;
+
+/* Internal state: is a request active at the sclp? */
+static volatile enum sclp_running_state_t {
+	sclp_running_state_idle,
+	sclp_running_state_running
+} sclp_running_state = sclp_running_state_idle;
+
+/* Internal state: is a read request pending? */
+static volatile enum sclp_reading_state_t {
+	sclp_reading_state_idle,
+	sclp_reading_state_reading
+} sclp_reading_state = sclp_reading_state_idle;
+
+/* Internal state: is the driver currently serving requests? */
+static volatile enum sclp_activation_state_t {
+	sclp_activation_state_active,
+	sclp_activation_state_deactivating,
+	sclp_activation_state_inactive,
+	sclp_activation_state_activating
+} sclp_activation_state = sclp_activation_state_active;
+
+/* Internal state: is an init mask request pending? */
+static volatile enum sclp_mask_state_t {
+	sclp_mask_state_idle,
+	sclp_mask_state_initializing
+} sclp_mask_state = sclp_mask_state_idle;
+
+/* Maximum retry counts */
+#define SCLP_INIT_RETRY		3
+#define SCLP_MASK_RETRY		3
+#define SCLP_REQUEST_RETRY	3
+
+/* Timeout intervals in seconds.*/
+#define SCLP_BUSY_INTERVAL	2
+#define SCLP_RETRY_INTERVAL	5
+
+static void sclp_process_queue(void);
+static int sclp_init_mask(int calculate);
+static int sclp_init(void);
+
+/* Perform service call. Return 0 on success, non-zero otherwise. */
+static int
+service_call(sclp_cmdw_t command, void *sccb)
+{
+	int cc;
+
+	__asm__ __volatile__(
+		"   .insn rre,0xb2200000,%1,%2\n"  /* servc %1,%2 */
+		"   ipm	  %0\n"
+		"   srl	  %0,28"
+		: "=&d" (cc)
+		: "d" (command), "a" (__pa(sccb))
+		: "cc", "memory" );
+	if (cc == 3)
+		return -EIO;
+	if (cc == 2)
+		return -EBUSY;
+	return 0;
+}
+
+/* Request timeout handler. Restart the request queue. If DATA is non-zero,
+ * force restart of running request. */
+static void
+sclp_request_timeout(unsigned long data)
+{
+	unsigned long flags;
+
+	if (data) {
+		spin_lock_irqsave(&sclp_lock, flags);
+		sclp_running_state = sclp_running_state_idle;
+		spin_unlock_irqrestore(&sclp_lock, flags);
+	}
+	sclp_process_queue();
+}
+
+/* Set up request retry timer. Called while sclp_lock is locked. */
+static inline void
+__sclp_set_request_timer(unsigned long time, void (*function)(unsigned long),
+			 unsigned long data)
+{
+	del_timer(&sclp_request_timer);
+	sclp_request_timer.function = function;
+	sclp_request_timer.data = data;
+	sclp_request_timer.expires = jiffies + time;
+	add_timer(&sclp_request_timer);
+}
+
+/* Try to start a request. Return zero if the request was successfully
+ * started or if it will be started at a later time. Return non-zero otherwise.
+ * Called while sclp_lock is locked. */
+static int
+__sclp_start_request(struct sclp_req *req)
+{
+	int rc;
+
+	if (sclp_running_state != sclp_running_state_idle)
+		return 0;
+	del_timer(&sclp_request_timer);
+	if (req->start_count <= SCLP_REQUEST_RETRY) {
+		rc = service_call(req->command, req->sccb);
+		req->start_count++;
+	} else
+		rc = -EIO;
+	if (rc == 0) {
+		/* Sucessfully started request */
+		req->status = SCLP_REQ_RUNNING;
+		sclp_running_state = sclp_running_state_running;
+		__sclp_set_request_timer(SCLP_RETRY_INTERVAL * HZ,
+					 sclp_request_timeout, 1);
+		return 0;
+	} else if (rc == -EBUSY) {
+		/* Try again later */
+		__sclp_set_request_timer(SCLP_BUSY_INTERVAL * HZ,
+					 sclp_request_timeout, 0);
+		return 0;
+	}
+	/* Request failed */
+	req->status = SCLP_REQ_FAILED;
+	return rc;
+}
+
+/* Try to start queued requests. */
+static void
+sclp_process_queue(void)
+{
+	struct sclp_req *req;
+	int rc;
+	unsigned long flags;
+
+	spin_lock_irqsave(&sclp_lock, flags);
+	if (sclp_running_state != sclp_running_state_idle) {
+		spin_unlock_irqrestore(&sclp_lock, flags);
+		return;
+	}
+	del_timer(&sclp_request_timer);
+	while (!list_empty(&sclp_req_queue)) {
+		req = list_entry(sclp_req_queue.next, struct sclp_req, list);
+		rc = __sclp_start_request(req);
+		if (rc == 0)
+			break;
+		/* Request failed. */
+		list_del(&req->list);
+		if (req->callback) {
+			spin_unlock_irqrestore(&sclp_lock, flags);
+			req->callback(req, req->callback_data);
+			spin_lock_irqsave(&sclp_lock, flags);
+		}
+	}
+	spin_unlock_irqrestore(&sclp_lock, flags);
+}
+
+/* Queue a new request. Return zero on success, non-zero otherwise. */
+int
+sclp_add_request(struct sclp_req *req)
+{
+	unsigned long flags;
+	int rc;
+
+	spin_lock_irqsave(&sclp_lock, flags);
+	if ((sclp_init_state != sclp_init_state_initialized ||
+	     sclp_activation_state != sclp_activation_state_active) &&
+	    req != &sclp_init_req) {
+		spin_unlock_irqrestore(&sclp_lock, flags);
+		return -EIO;
+	}
+	req->status = SCLP_REQ_QUEUED;
+	req->start_count = 0;
+	list_add_tail(&req->list, &sclp_req_queue);
+	rc = 0;
+	/* Start if request is first in list */
+	if (req->list.prev == &sclp_req_queue) {
+		rc = __sclp_start_request(req);
+		if (rc)
+			list_del(&req->list);
+	}
+	spin_unlock_irqrestore(&sclp_lock, flags);
+	return rc;
+}
+
+EXPORT_SYMBOL(sclp_add_request);
+
+/* Dispatch events found in request buffer to registered listeners. Return 0
+ * if all events were dispatched, non-zero otherwise. */
+static int
+sclp_dispatch_evbufs(struct sccb_header *sccb)
+{
+	unsigned long flags;
+	struct evbuf_header *evbuf;
+	struct list_head *l;
+	struct sclp_register *reg;
+	int offset;
+	int rc;
+
+	spin_lock_irqsave(&sclp_lock, flags);
+	rc = 0;
+	for (offset = sizeof(struct sccb_header); offset < sccb->length;
+	     offset += evbuf->length) {
+		/* Search for event handler */
+		evbuf = (struct evbuf_header *) ((addr_t) sccb + offset);
+		reg = NULL;
+		list_for_each(l, &sclp_reg_list) {
+			reg = list_entry(l, struct sclp_register, list);
+			if (reg->receive_mask & (1 << (32 - evbuf->type)))
+				break;
+			else
+				reg = NULL;
+		}
+		if (reg && reg->receiver_fn) {
+			spin_unlock_irqrestore(&sclp_lock, flags);
+			reg->receiver_fn(evbuf);
+			spin_lock_irqsave(&sclp_lock, flags);
+		} else if (reg == NULL)
+			rc = -ENOSYS;
+	}
+	spin_unlock_irqrestore(&sclp_lock, flags);
+	return rc;
+}
+
+/* Read event data request callback. */
+static void
+sclp_read_cb(struct sclp_req *req, void *data)
+{
+	unsigned long flags;
+	struct sccb_header *sccb;
+
+	sccb = (struct sccb_header *) req->sccb;
+	if (req->status == SCLP_REQ_DONE && (sccb->response_code == 0x20 ||
+	    sccb->response_code == 0x220))
+		sclp_dispatch_evbufs(sccb);
+	spin_lock_irqsave(&sclp_lock, flags);
+	sclp_reading_state = sclp_reading_state_idle;
+	spin_unlock_irqrestore(&sclp_lock, flags);
+}
+
+/* Prepare read event data request. Called while sclp_lock is locked. */
+static inline void
+__sclp_make_read_req(void)
+{
+	struct sccb_header *sccb;
+
+	sccb = (struct sccb_header *) sclp_read_sccb;
+	clear_page(sccb);
+	memset(&sclp_read_req, 0, sizeof(struct sclp_req));
+	sclp_read_req.command = SCLP_CMDW_READDATA;
+	sclp_read_req.status = SCLP_REQ_QUEUED;
+	sclp_read_req.start_count = 0;
+	sclp_read_req.callback = sclp_read_cb;
+	sclp_read_req.sccb = sccb;
+	sccb->length = PAGE_SIZE;
+	sccb->function_code = 0;
+	sccb->control_mask[2] = 0x80;
+}
+
+/* Search request list for request with matching sccb. Return request if found,
+ * NULL otherwise. Called while sclp_lock is locked. */
+static inline struct sclp_req *
+__sclp_find_req(u32 sccb)
+{
+	struct list_head *l;
+	struct sclp_req *req;
+
+	list_for_each(l, &sclp_req_queue) {
+		req = list_entry(l, struct sclp_req, list);
+		if (sccb == (u32) (addr_t) req->sccb)
+				return req;
+	}
+	return NULL;
+}
+
+/* Handler for external interruption. Perform request post-processing.
+ * Prepare read event data request if necessary. Start processing of next
+ * request on queue. */
+static void
+sclp_interrupt_handler(struct pt_regs *regs, __u16 code)
+{
+	struct sclp_req *req;
+	u32 finished_sccb;
+	u32 evbuf_pending;
+
+	spin_lock(&sclp_lock);
+	finished_sccb = S390_lowcore.ext_params & 0xfffffff8;
+	evbuf_pending = S390_lowcore.ext_params & 0x3;
+	if (finished_sccb) {
+		req = __sclp_find_req(finished_sccb);
+		if (req) {
+			/* Request post-processing */
+			list_del(&req->list);
+			req->status = SCLP_REQ_DONE;
+			if (req->callback) {
+				spin_unlock(&sclp_lock);
+				req->callback(req, req->callback_data);
+				spin_lock(&sclp_lock);
+			}
+		}
+		sclp_running_state = sclp_running_state_idle;
+	}
+	if (evbuf_pending && sclp_receive_mask != 0 &&
+	    sclp_reading_state == sclp_reading_state_idle &&
+	    sclp_activation_state == sclp_activation_state_active ) {
+		sclp_reading_state = sclp_reading_state_reading;
+		__sclp_make_read_req();
+		/* Add request to head of queue */
+		list_add(&sclp_read_req.list, &sclp_req_queue);
+	}
+	spin_unlock(&sclp_lock);
+	sclp_process_queue();
+}
+
+/* Return current Time-Of-Day clock. */
+static inline u64
+sclp_get_clock(void)
+{
+	u64 result;
+
+	asm volatile ("STCK 0(%1)" : "=m" (result) : "a" (&(result)) : "cc");
+	return result;
+}
+
+/* Convert interval in jiffies to TOD ticks. */
+static inline u64
+sclp_tod_from_jiffies(unsigned long jiffies)
+{
+	return (u64) (jiffies / HZ) << 32;
+}
+
+/* Wait until a currently running request finished. Note: while this function
+ * is running, no timers are served on the calling CPU. */
+void
+sclp_sync_wait(void)
+{
+	unsigned long psw_mask;
+	unsigned long cr0, cr0_sync;
+	u64 timeout;
+
+	/* We'll be disabling timer interrupts, so we need a custom timeout
+	 * mechanism */
+	timeout = 0;
+	if (timer_pending(&sclp_request_timer)) {
+		/* Get timeout TOD value */
+		timeout = sclp_get_clock() +
+			  sclp_tod_from_jiffies(sclp_request_timer.expires -
+						jiffies);
+	}
+	/* Prevent bottom half from executing once we force interrupts open */
+	local_bh_disable();
+	/* Enable service-signal interruption, disable timer interrupts */
+	__ctl_store(cr0, 0, 0);
+	cr0_sync = cr0;
+	cr0_sync |= 0x00000200;
+	cr0_sync &= 0xFFFFF3AC;
+	__ctl_load(cr0_sync, 0, 0);
+	asm volatile ("STOSM 0(%1),0x01"
+		      : "=m" (psw_mask) : "a" (&psw_mask) : "memory");
+	/* Loop until driver state indicates finished request */
+	while (sclp_running_state != sclp_running_state_idle) {
+		/* Check for expired request timer */
+		if (timer_pending(&sclp_request_timer) &&
+		    sclp_get_clock() > timeout &&
+		    del_timer(&sclp_request_timer))
+			sclp_request_timer.function(sclp_request_timer.data);
+		barrier();
+		cpu_relax();
+	}
+	/* Restore interrupt settings */
+	asm volatile ("SSM 0(%0)"
+		      : : "a" (&psw_mask) : "memory");
+	__ctl_load(cr0, 0, 0);
+	__local_bh_enable();
+}
+
+EXPORT_SYMBOL(sclp_sync_wait);
+
+/* Dispatch changes in send and receive mask to registered listeners. */
+static inline void
+sclp_dispatch_state_change(void)
+{
+	struct list_head *l;
+	struct sclp_register *reg;
+	unsigned long flags;
+	sccb_mask_t receive_mask;
+	sccb_mask_t send_mask;
+
+	do {
+		spin_lock_irqsave(&sclp_lock, flags);
+		reg = NULL;
+		list_for_each(l, &sclp_reg_list) {
+			reg = list_entry(l, struct sclp_register, list);
+			receive_mask = reg->receive_mask & sclp_receive_mask;
+			send_mask = reg->send_mask & sclp_send_mask;
+			if (reg->sclp_receive_mask != receive_mask ||
+			    reg->sclp_send_mask != send_mask) {
+				reg->sclp_receive_mask = receive_mask;
+				reg->sclp_send_mask = send_mask;
+				break;
+			} else
+				reg = NULL;
+		}
+		spin_unlock_irqrestore(&sclp_lock, flags);
+		if (reg && reg->state_change_fn)
+			reg->state_change_fn(reg);
+	} while (reg);
+}
+
+struct sclp_statechangebuf {
+	struct evbuf_header	header;
+	u8		validity_sclp_active_facility_mask : 1;
+	u8		validity_sclp_receive_mask : 1;
+	u8		validity_sclp_send_mask : 1;
+	u8		validity_read_data_function_mask : 1;
+	u16		_zeros : 12;
+	u16		mask_length;
+	u64		sclp_active_facility_mask;
+	sccb_mask_t	sclp_receive_mask;
+	sccb_mask_t	sclp_send_mask;
+	u32		read_data_function_mask;
+} __attribute__((packed));
+
+
+/* State change event callback. Inform listeners of changes. */
+static void
+sclp_state_change_cb(struct evbuf_header *evbuf)
+{
+	unsigned long flags;
+	struct sclp_statechangebuf *scbuf;
+
+	scbuf = (struct sclp_statechangebuf *) evbuf;
+	if (scbuf->mask_length != sizeof(sccb_mask_t))
+		return;
+	spin_lock_irqsave(&sclp_lock, flags);
+	if (scbuf->validity_sclp_receive_mask)
+		sclp_receive_mask = scbuf->sclp_receive_mask;
+	if (scbuf->validity_sclp_send_mask)
+		sclp_send_mask = scbuf->sclp_send_mask;
+	spin_unlock_irqrestore(&sclp_lock, flags);
+	sclp_dispatch_state_change();
+}
+
+static struct sclp_register sclp_state_change_event = {
+	.receive_mask = EvTyp_StateChange_Mask,
+	.receiver_fn = sclp_state_change_cb
+};
+
+/* Calculate receive and send mask of currently registered listeners.
+ * Called while sclp_lock is locked. */
+static inline void
+__sclp_get_mask(sccb_mask_t *receive_mask, sccb_mask_t *send_mask)
+{
+	struct list_head *l;
+	struct sclp_register *t;
+
+	*receive_mask = 0;
+	*send_mask = 0;
+	list_for_each(l, &sclp_reg_list) {
+		t = list_entry(l, struct sclp_register, list);
+		*receive_mask |= t->receive_mask;
+		*send_mask |= t->send_mask;
+	}
+}
+
+/* Register event listener. Return 0 on success, non-zero otherwise. */
+int
+sclp_register(struct sclp_register *reg)
+{
+	unsigned long flags;
+	sccb_mask_t receive_mask;
+	sccb_mask_t send_mask;
+	int rc;
+
+	rc = sclp_init();
+	if (rc)
+		return rc;
+	spin_lock_irqsave(&sclp_lock, flags);
+	/* Check event mask for collisions */
+	__sclp_get_mask(&receive_mask, &send_mask);
+	if (reg->receive_mask & receive_mask || reg->send_mask & send_mask) {
+		spin_unlock_irqrestore(&sclp_lock, flags);
+		return -EBUSY;
+	}
+	/* Trigger initial state change callback */
+	reg->sclp_receive_mask = 0;
+	reg->sclp_send_mask = 0;
+	list_add(&reg->list, &sclp_reg_list);
+	spin_unlock_irqrestore(&sclp_lock, flags);
+	rc = sclp_init_mask(1);
+	if (rc) {
+		spin_lock_irqsave(&sclp_lock, flags);
+		list_del(&reg->list);
+		spin_unlock_irqrestore(&sclp_lock, flags);
+	}
+	return rc;
+}
+
+EXPORT_SYMBOL(sclp_register);
+
+/* Unregister event listener. */
+void
+sclp_unregister(struct sclp_register *reg)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&sclp_lock, flags);
+	list_del(&reg->list);
+	spin_unlock_irqrestore(&sclp_lock, flags);
+	sclp_init_mask(1);
+}
+
+EXPORT_SYMBOL(sclp_unregister);
+
+/* Remove event buffers which are marked processed. Return the number of
+ * remaining event buffers. */
+int
+sclp_remove_processed(struct sccb_header *sccb)
+{
+	struct evbuf_header *evbuf;
+	int unprocessed;
+	u16 remaining;
+
+	evbuf = (struct evbuf_header *) (sccb + 1);
+	unprocessed = 0;
+	remaining = sccb->length - sizeof(struct sccb_header);
+	while (remaining > 0) {
+		remaining -= evbuf->length;
+		if (evbuf->flags & 0x80) {
+			sccb->length -= evbuf->length;
+			memcpy(evbuf, (void *) ((addr_t) evbuf + evbuf->length),
+			       remaining);
+		} else {
+			unprocessed++;
+			evbuf = (struct evbuf_header *)
+					((addr_t) evbuf + evbuf->length);
+		}
+	}
+	return unprocessed;
+}
+
+EXPORT_SYMBOL(sclp_remove_processed);
+
+struct init_sccb {
+	struct sccb_header header;
+	u16 _reserved;
+	u16 mask_length;
+	sccb_mask_t receive_mask;
+	sccb_mask_t send_mask;
+	sccb_mask_t sclp_send_mask;
+	sccb_mask_t sclp_receive_mask;
+} __attribute__((packed));
+
+/* Prepare init mask request. Called while sclp_lock is locked. */
+static inline void
+__sclp_make_init_req(u32 receive_mask, u32 send_mask)
+{
+	struct init_sccb *sccb;
+
+	sccb = (struct init_sccb *) sclp_init_sccb;
+	clear_page(sccb);
+	memset(&sclp_init_req, 0, sizeof(struct sclp_req));
+	sclp_init_req.command = SCLP_CMDW_WRITEMASK;
+	sclp_init_req.status = SCLP_REQ_FILLED;
+	sclp_init_req.start_count = 0;
+	sclp_init_req.callback = NULL;
+	sclp_init_req.callback_data = NULL;
+	sclp_init_req.sccb = sccb;
+	sccb->header.length = sizeof(struct init_sccb);
+	sccb->mask_length = sizeof(sccb_mask_t);
+	sccb->receive_mask = receive_mask;
+	sccb->send_mask = send_mask;
+	sccb->sclp_receive_mask = 0;
+	sccb->sclp_send_mask = 0;
+}
+
+/* Start init mask request. If calculate is non-zero, calculate the mask as
+ * requested by registered listeners. Use zero mask otherwise. Return 0 on
+ * success, non-zero otherwise. */
+static int
+sclp_init_mask(int calculate)
+{
+	unsigned long flags;
+	struct init_sccb *sccb = (struct init_sccb *) sclp_init_sccb;
+	sccb_mask_t receive_mask;
+	sccb_mask_t send_mask;
+	int retry;
+	int rc;
+	unsigned long wait;
+
+	spin_lock_irqsave(&sclp_lock, flags);
+	/* Check if interface is in appropriate state */
+	if (sclp_mask_state != sclp_mask_state_idle) {
+		spin_unlock_irqrestore(&sclp_lock, flags);
+		return -EBUSY;
+	}
+	if (sclp_activation_state == sclp_activation_state_inactive) {
+		spin_unlock_irqrestore(&sclp_lock, flags);
+		return -EINVAL;
+	}
+	sclp_mask_state = sclp_mask_state_initializing;
+	/* Determine mask */
+	if (calculate)
+		__sclp_get_mask(&receive_mask, &send_mask);
+	else {
+		receive_mask = 0;
+		send_mask = 0;
+	}
+	rc = -EIO;
+	for (retry = 0; retry <= SCLP_MASK_RETRY; retry++) {
+		/* Prepare request */
+		__sclp_make_init_req(receive_mask, send_mask);
+		spin_unlock_irqrestore(&sclp_lock, flags);
+		if (sclp_add_request(&sclp_init_req)) {
+			/* Try again later */
+			wait = jiffies + SCLP_BUSY_INTERVAL * HZ;
+			while (time_before(jiffies, wait))
+				sclp_sync_wait();
+			spin_lock_irqsave(&sclp_lock, flags);
+			continue;
+		}
+		while (sclp_init_req.status != SCLP_REQ_DONE &&
+		       sclp_init_req.status != SCLP_REQ_FAILED)
+			sclp_sync_wait();
+		spin_lock_irqsave(&sclp_lock, flags);
+		if (sclp_init_req.status == SCLP_REQ_DONE &&
+		    sccb->header.response_code == 0x20) {
+			/* Successful request */
+			if (calculate) {
+				sclp_receive_mask = sccb->sclp_receive_mask;
+				sclp_send_mask = sccb->sclp_send_mask;
+			} else {
+				sclp_receive_mask = 0;
+				sclp_send_mask = 0;
+			}
+			spin_unlock_irqrestore(&sclp_lock, flags);
+			sclp_dispatch_state_change();
+			spin_lock_irqsave(&sclp_lock, flags);
+			rc = 0;
+			break;
+		}
+	}
+	sclp_mask_state = sclp_mask_state_idle;
+	spin_unlock_irqrestore(&sclp_lock, flags);
+	return rc;
+}
+
+/* Deactivate SCLP interface. On success, new requests will be rejected,
+ * events will no longer be dispatched. Return 0 on success, non-zero
+ * otherwise. */
+int
+sclp_deactivate(void)
+{
+	unsigned long flags;
+	int rc;
+
+	spin_lock_irqsave(&sclp_lock, flags);
+	/* Deactivate can only be called when active */
+	if (sclp_activation_state != sclp_activation_state_active) {
+		spin_unlock_irqrestore(&sclp_lock, flags);
+		return -EINVAL;
+	}
+	sclp_activation_state = sclp_activation_state_deactivating;
+	spin_unlock_irqrestore(&sclp_lock, flags);
+	rc = sclp_init_mask(0);
+	spin_lock_irqsave(&sclp_lock, flags);
+	if (rc == 0)
+		sclp_activation_state = sclp_activation_state_inactive;
+	else
+		sclp_activation_state = sclp_activation_state_active;
+	spin_unlock_irqrestore(&sclp_lock, flags);
+	return rc;
+}
+
+EXPORT_SYMBOL(sclp_deactivate);
+
+/* Reactivate SCLP interface after sclp_deactivate. On success, new
+ * requests will be accepted, events will be dispatched again. Return 0 on
+ * success, non-zero otherwise. */
+int
+sclp_reactivate(void)
+{
+	unsigned long flags;
+	int rc;
+
+	spin_lock_irqsave(&sclp_lock, flags);
+	/* Reactivate can only be called when inactive */
+	if (sclp_activation_state != sclp_activation_state_inactive) {
+		spin_unlock_irqrestore(&sclp_lock, flags);
+		return -EINVAL;
+	}
+	sclp_activation_state = sclp_activation_state_activating;
+	spin_unlock_irqrestore(&sclp_lock, flags);
+	rc = sclp_init_mask(1);
+	spin_lock_irqsave(&sclp_lock, flags);
+	if (rc == 0)
+		sclp_activation_state = sclp_activation_state_active;
+	else
+		sclp_activation_state = sclp_activation_state_inactive;
+	spin_unlock_irqrestore(&sclp_lock, flags);
+	return rc;
+}
+
+EXPORT_SYMBOL(sclp_reactivate);
+
+/* Handler for external interruption used during initialization. Modify
+ * request state to done. */
+static void
+sclp_check_handler(struct pt_regs *regs, __u16 code)
+{
+	u32 finished_sccb;
+
+	finished_sccb = S390_lowcore.ext_params & 0xfffffff8;
+	/* Is this the interrupt we are waiting for? */
+	if (finished_sccb == 0)
+		return;
+	if (finished_sccb != (u32) (addr_t) sclp_init_sccb) {
+		printk(KERN_WARNING SCLP_HEADER "unsolicited interrupt "
+		       "for buffer at 0x%x\n", finished_sccb);
+		return;
+	}
+	spin_lock(&sclp_lock);
+	if (sclp_running_state == sclp_running_state_running) {
+		sclp_init_req.status = SCLP_REQ_DONE;
+		sclp_running_state = sclp_running_state_idle;
+	}
+	spin_unlock(&sclp_lock);
+}
+
+/* Initial init mask request timed out. Modify request state to failed. */
+static void
+sclp_check_timeout(unsigned long data)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&sclp_lock, flags);
+	if (sclp_running_state == sclp_running_state_running) {
+		sclp_init_req.status = SCLP_REQ_FAILED;
+		sclp_running_state = sclp_running_state_idle;
+	}
+	spin_unlock_irqrestore(&sclp_lock, flags);
+}
+
+/* Perform a check of the SCLP interface. Return zero if the interface is
+ * available and there are no pending requests from a previous instance.
+ * Return non-zero otherwise. */
+static int
+sclp_check_interface(void)
+{
+	struct init_sccb *sccb;
+	unsigned long flags;
+	int retry;
+	int rc;
+
+	spin_lock_irqsave(&sclp_lock, flags);
+	/* Prepare init mask command */
+	rc = register_early_external_interrupt(0x2401, sclp_check_handler,
+					       &ext_int_info_hwc);
+	if (rc) {
+		spin_unlock_irqrestore(&sclp_lock, flags);
+		return rc;
+	}
+	for (retry = 0; retry <= SCLP_INIT_RETRY; retry++) {
+		__sclp_make_init_req(0, 0);
+		sccb = (struct init_sccb *) sclp_init_req.sccb;
+		rc = service_call(sclp_init_req.command, sccb);
+		if (rc == -EIO)
+			break;
+		sclp_init_req.status = SCLP_REQ_RUNNING;
+		sclp_running_state = sclp_running_state_running;
+		__sclp_set_request_timer(SCLP_RETRY_INTERVAL * HZ,
+					 sclp_check_timeout, 0);
+		spin_unlock_irqrestore(&sclp_lock, flags);
+		/* Enable service-signal interruption - needs to happen
+		 * with IRQs enabled. */
+		ctl_set_bit(0, 9);
+		/* Wait for signal from interrupt or timeout */
+		sclp_sync_wait();
+		/* Disable service-signal interruption - needs to happen
+		 * with IRQs enabled. */
+		ctl_clear_bit(0,9);
+		spin_lock_irqsave(&sclp_lock, flags);
+		del_timer(&sclp_request_timer);
+		if (sclp_init_req.status == SCLP_REQ_DONE &&
+		    sccb->header.response_code == 0x20) {
+			rc = 0;
+			break;
+		} else
+			rc = -EBUSY;
+	}
+	unregister_early_external_interrupt(0x2401, sclp_check_handler,
+					    &ext_int_info_hwc);
+	spin_unlock_irqrestore(&sclp_lock, flags);
+	return rc;
+}
+
+/* Reboot event handler. Reset send and receive mask to prevent pending SCLP
+ * events from interfering with rebooted system. */
+static int
+sclp_reboot_event(struct notifier_block *this, unsigned long event, void *ptr)
+{
+	sclp_deactivate();
+	return NOTIFY_DONE;
+}
+
+static struct notifier_block sclp_reboot_notifier = {
+	.notifier_call = sclp_reboot_event
+};
+
+/* Initialize SCLP driver. Return zero if driver is operational, non-zero
+ * otherwise. */
+static int
+sclp_init(void)
+{
+	unsigned long flags;
+	int rc;
+
+	if (!MACHINE_HAS_SCLP)
+		return -ENODEV;
+	spin_lock_irqsave(&sclp_lock, flags);
+	/* Check for previous or running initialization */
+	if (sclp_init_state != sclp_init_state_uninitialized) {
+		spin_unlock_irqrestore(&sclp_lock, flags);
+		return 0;
+	}
+	sclp_init_state = sclp_init_state_initializing;
+	/* Set up variables */
+	INIT_LIST_HEAD(&sclp_req_queue);
+	INIT_LIST_HEAD(&sclp_reg_list);
+	list_add(&sclp_state_change_event.list, &sclp_reg_list);
+	init_timer(&sclp_request_timer);
+	/* Check interface */
+	spin_unlock_irqrestore(&sclp_lock, flags);
+	rc = sclp_check_interface();
+	spin_lock_irqsave(&sclp_lock, flags);
+	if (rc) {
+		sclp_init_state = sclp_init_state_uninitialized;
+		spin_unlock_irqrestore(&sclp_lock, flags);
+		return rc;
+	}
+	/* Register reboot handler */
+	rc = register_reboot_notifier(&sclp_reboot_notifier);
+	if (rc) {
+		sclp_init_state = sclp_init_state_uninitialized;
+		spin_unlock_irqrestore(&sclp_lock, flags);
+		return rc;
+	}
+	/* Register interrupt handler */
+	rc = register_early_external_interrupt(0x2401, sclp_interrupt_handler,
+					       &ext_int_info_hwc);
+	if (rc) {
+		unregister_reboot_notifier(&sclp_reboot_notifier);
+		sclp_init_state = sclp_init_state_uninitialized;
+		spin_unlock_irqrestore(&sclp_lock, flags);
+		return rc;
+	}
+	sclp_init_state = sclp_init_state_initialized;
+	spin_unlock_irqrestore(&sclp_lock, flags);
+	/* Enable service-signal external interruption - needs to happen with
+	 * IRQs enabled. */
+	ctl_set_bit(0, 9);
+	sclp_init_mask(1);
+	return 0;
+}
diff --git a/drivers/s390/char/sclp.h b/drivers/s390/char/sclp.h
new file mode 100644
index 0000000..2c71d6e
--- /dev/null
+++ b/drivers/s390/char/sclp.h
@@ -0,0 +1,159 @@
+/*
+ *  drivers/s390/char/sclp.h
+ *
+ *  S390 version
+ *    Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *    Author(s): Martin Peschke <mpeschke@de.ibm.com>
+ *		 Martin Schwidefsky <schwidefsky@de.ibm.com>
+ */
+
+#ifndef __SCLP_H__
+#define __SCLP_H__
+
+#include <linux/types.h>
+#include <linux/list.h>
+
+#include <asm/ebcdic.h>
+
+/* maximum number of pages concerning our own memory management */
+#define MAX_KMEM_PAGES (sizeof(unsigned long) << 3)
+#define MAX_CONSOLE_PAGES	4
+
+#define EvTyp_OpCmd		0x01
+#define EvTyp_Msg		0x02
+#define EvTyp_StateChange	0x08
+#define EvTyp_PMsgCmd		0x09
+#define EvTyp_CntlProgOpCmd	0x20
+#define EvTyp_CntlProgIdent	0x0B
+#define EvTyp_SigQuiesce	0x1D
+#define EvTyp_VT220Msg		0x1A
+
+#define EvTyp_OpCmd_Mask	0x80000000
+#define EvTyp_Msg_Mask		0x40000000
+#define EvTyp_StateChange_Mask	0x01000000
+#define EvTyp_PMsgCmd_Mask	0x00800000
+#define EvTyp_CtlProgOpCmd_Mask	0x00000001
+#define EvTyp_CtlProgIdent_Mask	0x00200000
+#define EvTyp_SigQuiesce_Mask	0x00000008
+#define EvTyp_VT220Msg_Mask	0x00000040
+
+#define GnrlMsgFlgs_DOM		0x8000
+#define GnrlMsgFlgs_SndAlrm	0x4000
+#define GnrlMsgFlgs_HoldMsg	0x2000
+
+#define LnTpFlgs_CntlText	0x8000
+#define LnTpFlgs_LabelText	0x4000
+#define LnTpFlgs_DataText	0x2000
+#define LnTpFlgs_EndText	0x1000
+#define LnTpFlgs_PromptText	0x0800
+
+typedef unsigned int sclp_cmdw_t;
+
+#define SCLP_CMDW_READDATA	0x00770005
+#define SCLP_CMDW_WRITEDATA	0x00760005
+#define SCLP_CMDW_WRITEMASK	0x00780005
+
+#define GDS_ID_MDSMU		0x1310
+#define GDS_ID_MDSRouteInfo	0x1311
+#define GDS_ID_AgUnWrkCorr	0x1549
+#define GDS_ID_SNACondReport	0x1532
+#define GDS_ID_CPMSU		0x1212
+#define GDS_ID_RoutTargInstr	0x154D
+#define GDS_ID_OpReq		0x8070
+#define GDS_ID_TextCmd		0x1320
+
+#define GDS_KEY_SelfDefTextMsg	0x31
+
+typedef u32 sccb_mask_t;	/* ATTENTION: assumes 32bit mask !!! */
+
+struct sccb_header {
+	u16	length;
+	u8	function_code;
+	u8	control_mask[3];
+	u16	response_code;
+} __attribute__((packed));
+
+struct gds_subvector {
+	u8	length;
+	u8	key;
+} __attribute__((packed));
+
+struct gds_vector {
+	u16	length;
+	u16	gds_id;
+} __attribute__((packed));
+
+struct evbuf_header {
+	u16	length;
+	u8	type;
+	u8	flags;
+	u16	_reserved;
+} __attribute__((packed));
+
+struct sclp_req {
+	struct list_head list;		/* list_head for request queueing. */
+	sclp_cmdw_t command;		/* sclp command to execute */
+	void	*sccb;			/* pointer to the sccb to execute */
+	char	status;			/* status of this request */
+	int     start_count;		/* number of SVCs done for this req */
+	/* Callback that is called after reaching final status. */
+	void (*callback)(struct sclp_req *, void *data);
+	void *callback_data;
+};
+
+#define SCLP_REQ_FILLED	  0x00	/* request is ready to be processed */
+#define SCLP_REQ_QUEUED	  0x01	/* request is queued to be processed */
+#define SCLP_REQ_RUNNING  0x02	/* request is currently running */
+#define SCLP_REQ_DONE	  0x03	/* request is completed successfully */
+#define SCLP_REQ_FAILED	  0x05	/* request is finally failed */
+
+/* function pointers that a high level driver has to use for registration */
+/* of some routines it wants to be called from the low level driver */
+struct sclp_register {
+	struct list_head list;
+	/* event masks this user is registered for */
+	sccb_mask_t receive_mask;
+	sccb_mask_t send_mask;
+	/* actually present events */
+	sccb_mask_t sclp_receive_mask;
+	sccb_mask_t sclp_send_mask;
+	/* called if event type availability changes */
+	void (*state_change_fn)(struct sclp_register *);
+	/* called for events in cp_receive_mask/sclp_receive_mask */
+	void (*receiver_fn)(struct evbuf_header *);
+};
+
+/* externals from sclp.c */
+int sclp_add_request(struct sclp_req *req);
+void sclp_sync_wait(void);
+int sclp_register(struct sclp_register *reg);
+void sclp_unregister(struct sclp_register *reg);
+int sclp_remove_processed(struct sccb_header *sccb);
+int sclp_deactivate(void);
+int sclp_reactivate(void);
+
+/* useful inlines */
+
+/* VM uses EBCDIC 037, LPAR+native(SE+HMC) use EBCDIC 500 */
+/* translate single character from ASCII to EBCDIC */
+static inline unsigned char
+sclp_ascebc(unsigned char ch)
+{
+	return (MACHINE_IS_VM) ? _ascebc[ch] : _ascebc_500[ch];
+}
+
+/* translate string from EBCDIC to ASCII */
+static inline void
+sclp_ebcasc_str(unsigned char *str, int nr)
+{
+	(MACHINE_IS_VM) ? EBCASC(str, nr) : EBCASC_500(str, nr);
+}
+
+/* translate string from ASCII to EBCDIC */
+static inline void
+sclp_ascebc_str(unsigned char *str, int nr)
+{
+	(MACHINE_IS_VM) ? ASCEBC(str, nr) : ASCEBC_500(str, nr);
+}
+
+#endif	 /* __SCLP_H__ */
diff --git a/drivers/s390/char/sclp_con.c b/drivers/s390/char/sclp_con.c
new file mode 100644
index 0000000..10ef22f
--- /dev/null
+++ b/drivers/s390/char/sclp_con.c
@@ -0,0 +1,252 @@
+/*
+ *  drivers/s390/char/sclp_con.c
+ *    SCLP line mode console driver
+ *
+ *  S390 version
+ *    Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *    Author(s): Martin Peschke <mpeschke@de.ibm.com>
+ *		 Martin Schwidefsky <schwidefsky@de.ibm.com>
+ */
+
+#include <linux/config.h>
+#include <linux/kmod.h>
+#include <linux/console.h>
+#include <linux/init.h>
+#include <linux/timer.h>
+#include <linux/jiffies.h>
+#include <linux/bootmem.h>
+#include <linux/err.h>
+
+#include "sclp.h"
+#include "sclp_rw.h"
+#include "sclp_tty.h"
+
+#define SCLP_CON_PRINT_HEADER "sclp console driver: "
+
+#define sclp_console_major 4		/* TTYAUX_MAJOR */
+#define sclp_console_minor 64
+#define sclp_console_name  "ttyS"
+
+/* Lock to guard over changes to global variables */
+static spinlock_t sclp_con_lock;
+/* List of free pages that can be used for console output buffering */
+static struct list_head sclp_con_pages;
+/* List of full struct sclp_buffer structures ready for output */
+static struct list_head sclp_con_outqueue;
+/* Counter how many buffers are emitted (max 1) and how many */
+/* are on the output queue. */
+static int sclp_con_buffer_count;
+/* Pointer to current console buffer */
+static struct sclp_buffer *sclp_conbuf;
+/* Timer for delayed output of console messages */
+static struct timer_list sclp_con_timer;
+
+/* Output format for console messages */
+static unsigned short sclp_con_columns;
+static unsigned short sclp_con_width_htab;
+
+static void
+sclp_conbuf_callback(struct sclp_buffer *buffer, int rc)
+{
+	unsigned long flags;
+	void *page;
+
+	do {
+		page = sclp_unmake_buffer(buffer);
+		spin_lock_irqsave(&sclp_con_lock, flags);
+		/* Remove buffer from outqueue */
+		list_del(&buffer->list);
+		sclp_con_buffer_count--;
+		list_add_tail((struct list_head *) page, &sclp_con_pages);
+		/* Check if there is a pending buffer on the out queue. */
+		buffer = NULL;
+		if (!list_empty(&sclp_con_outqueue))
+			buffer = list_entry(sclp_con_outqueue.next,
+					    struct sclp_buffer, list);
+		spin_unlock_irqrestore(&sclp_con_lock, flags);
+	} while (buffer && sclp_emit_buffer(buffer, sclp_conbuf_callback));
+}
+
+static inline void
+sclp_conbuf_emit(void)
+{
+	struct sclp_buffer* buffer;
+	unsigned long flags;
+	int count;
+	int rc;
+
+	spin_lock_irqsave(&sclp_con_lock, flags);
+	buffer = sclp_conbuf;
+	sclp_conbuf = NULL;
+	if (buffer == NULL) {
+		spin_unlock_irqrestore(&sclp_con_lock, flags);
+		return;
+	}
+	list_add_tail(&buffer->list, &sclp_con_outqueue);
+	count = sclp_con_buffer_count++;
+	spin_unlock_irqrestore(&sclp_con_lock, flags);
+	if (count)
+		return;
+	rc = sclp_emit_buffer(buffer, sclp_conbuf_callback);
+	if (rc)
+		sclp_conbuf_callback(buffer, rc);
+}
+
+/*
+ * When this routine is called from the timer then we flush the
+ * temporary write buffer without further waiting on a final new line.
+ */
+static void
+sclp_console_timeout(unsigned long data)
+{
+	sclp_conbuf_emit();
+}
+
+/*
+ * Writes the given message to S390 system console
+ */
+static void
+sclp_console_write(struct console *console, const char *message,
+		   unsigned int count)
+{
+	unsigned long flags;
+	void *page;
+	int written;
+
+	if (count == 0)
+		return;
+	spin_lock_irqsave(&sclp_con_lock, flags);
+	/*
+	 * process escape characters, write message into buffer,
+	 * send buffer to SCLP
+	 */
+	do {
+		/* make sure we have a console output buffer */
+		if (sclp_conbuf == NULL) {
+			while (list_empty(&sclp_con_pages)) {
+				spin_unlock_irqrestore(&sclp_con_lock, flags);
+				sclp_sync_wait();
+				spin_lock_irqsave(&sclp_con_lock, flags);
+			}
+			page = sclp_con_pages.next;
+			list_del((struct list_head *) page);
+			sclp_conbuf = sclp_make_buffer(page, sclp_con_columns,
+						       sclp_con_width_htab);
+		}
+		/* try to write the string to the current output buffer */
+		written = sclp_write(sclp_conbuf, (const unsigned char *)
+				     message, count);
+		if (written == count)
+			break;
+		/*
+		 * Not all characters could be written to the current
+		 * output buffer. Emit the buffer, create a new buffer
+		 * and then output the rest of the string.
+		 */
+		spin_unlock_irqrestore(&sclp_con_lock, flags);
+		sclp_conbuf_emit();
+		spin_lock_irqsave(&sclp_con_lock, flags);
+		message += written;
+		count -= written;
+	} while (count > 0);
+	/* Setup timer to output current console buffer after 1/10 second */
+	if (sclp_conbuf != NULL && sclp_chars_in_buffer(sclp_conbuf) != 0 &&
+	    !timer_pending(&sclp_con_timer)) {
+		init_timer(&sclp_con_timer);
+		sclp_con_timer.function = sclp_console_timeout;
+		sclp_con_timer.data = 0UL;
+		sclp_con_timer.expires = jiffies + HZ/10;
+		add_timer(&sclp_con_timer);
+	}
+	spin_unlock_irqrestore(&sclp_con_lock, flags);
+}
+
+static struct tty_driver *
+sclp_console_device(struct console *c, int *index)
+{
+	*index = c->index;
+	return sclp_tty_driver;
+}
+
+/*
+ * This routine is called from panic when the kernel
+ * is going to give up. We have to make sure that all buffers
+ * will be flushed to the SCLP.
+ */
+static void
+sclp_console_unblank(void)
+{
+	unsigned long flags;
+
+	sclp_conbuf_emit();
+	spin_lock_irqsave(&sclp_con_lock, flags);
+	if (timer_pending(&sclp_con_timer))
+		del_timer(&sclp_con_timer);
+	while (sclp_con_buffer_count > 0) {
+		spin_unlock_irqrestore(&sclp_con_lock, flags);
+		sclp_sync_wait();
+		spin_lock_irqsave(&sclp_con_lock, flags);
+	}
+	spin_unlock_irqrestore(&sclp_con_lock, flags);
+}
+
+/*
+ * used to register the SCLP console to the kernel and to
+ * give printk necessary information
+ */
+static struct console sclp_console =
+{
+	.name = sclp_console_name,
+	.write = sclp_console_write,
+	.device = sclp_console_device,
+	.unblank = sclp_console_unblank,
+	.flags = CON_PRINTBUFFER,
+	.index = 0 /* ttyS0 */
+};
+
+/*
+ * called by console_init() in drivers/char/tty_io.c at boot-time.
+ */
+static int __init
+sclp_console_init(void)
+{
+	void *page;
+	int i;
+	int rc;
+
+	if (!CONSOLE_IS_SCLP)
+		return 0;
+	rc = sclp_rw_init();
+	if (rc)
+		return rc;
+	/* Allocate pages for output buffering */
+	INIT_LIST_HEAD(&sclp_con_pages);
+	for (i = 0; i < MAX_CONSOLE_PAGES; i++) {
+		page = alloc_bootmem_low_pages(PAGE_SIZE);
+		if (page == NULL)
+			return -ENOMEM;
+		list_add_tail((struct list_head *) page, &sclp_con_pages);
+	}
+	INIT_LIST_HEAD(&sclp_con_outqueue);
+	spin_lock_init(&sclp_con_lock);
+	sclp_con_buffer_count = 0;
+	sclp_conbuf = NULL;
+	init_timer(&sclp_con_timer);
+
+	/* Set output format */
+	if (MACHINE_IS_VM)
+		/*
+		 * save 4 characters for the CPU number
+		 * written at start of each line by VM/CP
+		 */
+		sclp_con_columns = 76;
+	else
+		sclp_con_columns = 80;
+	sclp_con_width_htab = 8;
+
+	/* enable printk-access to this driver */
+	register_console(&sclp_console);
+	return 0;
+}
+
+console_initcall(sclp_console_init);
diff --git a/drivers/s390/char/sclp_cpi.c b/drivers/s390/char/sclp_cpi.c
new file mode 100644
index 0000000..5a6cef2
--- /dev/null
+++ b/drivers/s390/char/sclp_cpi.c
@@ -0,0 +1,254 @@
+/*
+ * Author: Martin Peschke <mpeschke@de.ibm.com>
+ * Copyright (C) 2001 IBM Entwicklung GmbH, IBM Corporation
+ *
+ * SCLP Control-Program Identification.
+ */
+
+#include <linux/config.h>
+#include <linux/version.h>
+#include <linux/kmod.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/timer.h>
+#include <linux/string.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <asm/ebcdic.h>
+#include <asm/semaphore.h>
+
+#include "sclp.h"
+#include "sclp_rw.h"
+
+#define CPI_LENGTH_SYSTEM_TYPE	8
+#define CPI_LENGTH_SYSTEM_NAME	8
+#define CPI_LENGTH_SYSPLEX_NAME	8
+
+struct cpi_evbuf {
+	struct evbuf_header header;
+	u8	id_format;
+	u8	reserved0;
+	u8	system_type[CPI_LENGTH_SYSTEM_TYPE];
+	u64	reserved1;
+	u8	system_name[CPI_LENGTH_SYSTEM_NAME];
+	u64	reserved2;
+	u64	system_level;
+	u64	reserved3;
+	u8	sysplex_name[CPI_LENGTH_SYSPLEX_NAME];
+	u8	reserved4[16];
+} __attribute__((packed));
+
+struct cpi_sccb {
+	struct sccb_header header;
+	struct cpi_evbuf cpi_evbuf;
+} __attribute__((packed));
+
+/* Event type structure for write message and write priority message */
+static struct sclp_register sclp_cpi_event =
+{
+	.send_mask = EvTyp_CtlProgIdent_Mask
+};
+
+MODULE_AUTHOR(
+	"Martin Peschke, IBM Deutschland Entwicklung GmbH "
+	"<mpeschke@de.ibm.com>");
+
+MODULE_DESCRIPTION(
+	"identify this operating system instance to the S/390 "
+	"or zSeries hardware");
+
+static char *system_name = NULL;
+module_param(system_name, charp, 0);
+MODULE_PARM_DESC(system_name, "e.g. hostname - max. 8 characters");
+
+static char *sysplex_name = NULL;
+#ifdef ALLOW_SYSPLEX_NAME
+module_param(sysplex_name, charp, 0);
+MODULE_PARM_DESC(sysplex_name, "if applicable - max. 8 characters");
+#endif
+
+/* use default value for this field (as well as for system level) */
+static char *system_type = "LINUX";
+
+static int
+cpi_check_parms(void)
+{
+	/* reject if no system type specified */
+	if (!system_type) {
+		printk("cpi: bug: no system type specified\n");
+		return -EINVAL;
+	}
+
+	/* reject if system type larger than 8 characters */
+	if (strlen(system_type) > CPI_LENGTH_SYSTEM_NAME) {
+		printk("cpi: bug: system type has length of %li characters - "
+		       "only %i characters supported\n",
+		       strlen(system_type), CPI_LENGTH_SYSTEM_TYPE);
+		return -EINVAL;
+	}
+
+	/* reject if no system name specified */
+	if (!system_name) {
+		printk("cpi: no system name specified\n");
+		return -EINVAL;
+	}
+
+	/* reject if system name larger than 8 characters */
+	if (strlen(system_name) > CPI_LENGTH_SYSTEM_NAME) {
+		printk("cpi: system name has length of %li characters - "
+		       "only %i characters supported\n",
+		       strlen(system_name), CPI_LENGTH_SYSTEM_NAME);
+		return -EINVAL;
+	}
+
+	/* reject if specified sysplex name larger than 8 characters */
+	if (sysplex_name && strlen(sysplex_name) > CPI_LENGTH_SYSPLEX_NAME) {
+		printk("cpi: sysplex name has length of %li characters"
+		       " - only %i characters supported\n",
+		       strlen(sysplex_name), CPI_LENGTH_SYSPLEX_NAME);
+		return -EINVAL;
+	}
+	return 0;
+}
+
+static void
+cpi_callback(struct sclp_req *req, void *data)
+{
+	struct semaphore *sem;
+
+	sem = (struct semaphore *) data;
+	up(sem);
+}
+
+static struct sclp_req *
+cpi_prepare_req(void)
+{
+	struct sclp_req *req;
+	struct cpi_sccb *sccb;
+	struct cpi_evbuf *evb;
+
+	req = (struct sclp_req *) kmalloc(sizeof(struct sclp_req), GFP_KERNEL);
+	if (req == NULL)
+		return ERR_PTR(-ENOMEM);
+	sccb = (struct cpi_sccb *) __get_free_page(GFP_KERNEL | GFP_DMA);
+	if (sccb == NULL) {
+		kfree(req);
+		return ERR_PTR(-ENOMEM);
+	}
+	memset(sccb, 0, sizeof(struct cpi_sccb));
+
+	/* setup SCCB for Control-Program Identification */
+	sccb->header.length = sizeof(struct cpi_sccb);
+	sccb->cpi_evbuf.header.length = sizeof(struct cpi_evbuf);
+	sccb->cpi_evbuf.header.type = 0x0B;
+	evb = &sccb->cpi_evbuf;
+
+	/* set system type */
+	memset(evb->system_type, ' ', CPI_LENGTH_SYSTEM_TYPE);
+	memcpy(evb->system_type, system_type, strlen(system_type));
+	sclp_ascebc_str(evb->system_type, CPI_LENGTH_SYSTEM_TYPE);
+	EBC_TOUPPER(evb->system_type, CPI_LENGTH_SYSTEM_TYPE);
+
+	/* set system name */
+	memset(evb->system_name, ' ', CPI_LENGTH_SYSTEM_NAME);
+	memcpy(evb->system_name, system_name, strlen(system_name));
+	sclp_ascebc_str(evb->system_name, CPI_LENGTH_SYSTEM_NAME);
+	EBC_TOUPPER(evb->system_name, CPI_LENGTH_SYSTEM_NAME);
+
+	/* set sytem level */
+	evb->system_level = LINUX_VERSION_CODE;
+
+	/* set sysplex name */
+	if (sysplex_name) {
+		memset(evb->sysplex_name, ' ', CPI_LENGTH_SYSPLEX_NAME);
+		memcpy(evb->sysplex_name, sysplex_name, strlen(sysplex_name));
+		sclp_ascebc_str(evb->sysplex_name, CPI_LENGTH_SYSPLEX_NAME);
+		EBC_TOUPPER(evb->sysplex_name, CPI_LENGTH_SYSPLEX_NAME);
+	}
+
+	/* prepare request data structure presented to SCLP driver */
+	req->command = SCLP_CMDW_WRITEDATA;
+	req->sccb = sccb;
+	req->status = SCLP_REQ_FILLED;
+	req->callback = cpi_callback;
+	return req;
+}
+
+static void
+cpi_free_req(struct sclp_req *req)
+{
+	free_page((unsigned long) req->sccb);
+	kfree(req);
+}
+
+static int __init
+cpi_module_init(void)
+{
+	struct semaphore sem;
+	struct sclp_req *req;
+	int rc;
+
+	rc = cpi_check_parms();
+	if (rc)
+		return rc;
+
+	rc = sclp_register(&sclp_cpi_event);
+	if (rc) {
+		/* could not register sclp event. Die. */
+		printk(KERN_WARNING "cpi: could not register to hardware "
+		       "console.\n");
+		return -EINVAL;
+	}
+	if (!(sclp_cpi_event.sclp_send_mask & EvTyp_CtlProgIdent_Mask)) {
+		printk(KERN_WARNING "cpi: no control program identification "
+		       "support\n");
+		sclp_unregister(&sclp_cpi_event);
+		return -ENOTSUPP;
+	}
+
+	req = cpi_prepare_req();
+	if (IS_ERR(req)) {
+		printk(KERN_WARNING "cpi: couldn't allocate request\n");
+		sclp_unregister(&sclp_cpi_event);
+		return PTR_ERR(req);
+	}
+
+	/* Prepare semaphore */
+	sema_init(&sem, 0);
+	req->callback_data = &sem;
+	/* Add request to sclp queue */
+	rc = sclp_add_request(req);
+	if (rc) {
+		printk(KERN_WARNING "cpi: could not start request\n");
+		cpi_free_req(req);
+		sclp_unregister(&sclp_cpi_event);
+		return rc;
+	}
+	/* make "insmod" sleep until callback arrives */
+	down(&sem);
+
+	rc = ((struct cpi_sccb *) req->sccb)->header.response_code;
+	if (rc != 0x0020) {
+		printk(KERN_WARNING "cpi: failed with response code 0x%x\n",
+		       rc);
+		rc = -ECOMM;
+	} else
+		rc = 0;
+
+	cpi_free_req(req);
+	sclp_unregister(&sclp_cpi_event);
+
+	return rc;
+}
+
+
+static void __exit cpi_module_exit(void)
+{
+}
+
+
+/* declare driver module init/cleanup functions */
+module_init(cpi_module_init);
+module_exit(cpi_module_exit);
+
diff --git a/drivers/s390/char/sclp_quiesce.c b/drivers/s390/char/sclp_quiesce.c
new file mode 100644
index 0000000..83f7577
--- /dev/null
+++ b/drivers/s390/char/sclp_quiesce.c
@@ -0,0 +1,99 @@
+/*
+ *  drivers/s390/char/sclp_quiesce.c
+ *     signal quiesce handler
+ *
+ *  (C) Copyright IBM Corp. 1999,2004
+ *  Author(s): Martin Schwidefsky <schwidefsky@de.ibm.com>
+ *             Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/cpumask.h>
+#include <linux/smp.h>
+#include <linux/init.h>
+#include <asm/atomic.h>
+#include <asm/ptrace.h>
+#include <asm/sigp.h>
+
+#include "sclp.h"
+
+
+#ifdef CONFIG_SMP
+/* Signal completion of shutdown process. All CPUs except the first to enter
+ * this function: go to stopped state. First CPU: wait until all other
+ * CPUs are in stopped or check stop state. Afterwards, load special PSW
+ * to indicate completion. */
+static void
+do_load_quiesce_psw(void * __unused)
+{
+	static atomic_t cpuid = ATOMIC_INIT(-1);
+	psw_t quiesce_psw;
+	int cpu;
+
+	if (atomic_compare_and_swap(-1, smp_processor_id(), &cpuid))
+		signal_processor(smp_processor_id(), sigp_stop);
+	/* Wait for all other cpus to enter stopped state */
+	for_each_online_cpu(cpu) {
+		if (cpu == smp_processor_id())
+			continue;
+		while(!smp_cpu_not_running(cpu))
+			cpu_relax();
+	}
+	/* Quiesce the last cpu with the special psw */
+	quiesce_psw.mask = PSW_BASE_BITS | PSW_MASK_WAIT;
+	quiesce_psw.addr = 0xfff;
+	__load_psw(quiesce_psw);
+}
+
+/* Shutdown handler. Perform shutdown function on all CPUs. */
+static void
+do_machine_quiesce(void)
+{
+	on_each_cpu(do_load_quiesce_psw, NULL, 0, 0);
+}
+#else
+/* Shutdown handler. Signal completion of shutdown by loading special PSW. */
+static void
+do_machine_quiesce(void)
+{
+	psw_t quiesce_psw;
+
+	quiesce_psw.mask = PSW_BASE_BITS | PSW_MASK_WAIT;
+	quiesce_psw.addr = 0xfff;
+	__load_psw(quiesce_psw);
+}
+#endif
+
+extern void ctrl_alt_del(void);
+
+/* Handler for quiesce event. Start shutdown procedure. */
+static void
+sclp_quiesce_handler(struct evbuf_header *evbuf)
+{
+	_machine_restart = (void *) do_machine_quiesce;
+	_machine_halt = do_machine_quiesce;
+	_machine_power_off = do_machine_quiesce;
+	ctrl_alt_del();
+}
+
+static struct sclp_register sclp_quiesce_event = {
+	.receive_mask = EvTyp_SigQuiesce_Mask,
+	.receiver_fn = sclp_quiesce_handler
+};
+
+/* Initialize quiesce driver. */
+static int __init
+sclp_quiesce_init(void)
+{
+	int rc;
+
+	rc = sclp_register(&sclp_quiesce_event);
+	if (rc)
+		printk(KERN_WARNING "sclp: could not register quiesce handler "
+		       "(rc=%d)\n", rc);
+	return rc;
+}
+
+module_init(sclp_quiesce_init);
diff --git a/drivers/s390/char/sclp_rw.c b/drivers/s390/char/sclp_rw.c
new file mode 100644
index 0000000..ac10dfb
--- /dev/null
+++ b/drivers/s390/char/sclp_rw.c
@@ -0,0 +1,471 @@
+/*
+ *  drivers/s390/char/sclp_rw.c
+ *     driver: reading from and writing to system console on S/390 via SCLP
+ *
+ *  S390 version
+ *    Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *    Author(s): Martin Peschke <mpeschke@de.ibm.com>
+ *		 Martin Schwidefsky <schwidefsky@de.ibm.com>
+ */
+
+#include <linux/config.h>
+#include <linux/kmod.h>
+#include <linux/types.h>
+#include <linux/err.h>
+#include <linux/string.h>
+#include <linux/spinlock.h>
+#include <linux/ctype.h>
+#include <asm/uaccess.h>
+
+#include "sclp.h"
+#include "sclp_rw.h"
+
+#define SCLP_RW_PRINT_HEADER "sclp low level driver: "
+
+/*
+ * The room for the SCCB (only for writing) is not equal to a pages size
+ * (as it is specified as the maximum size in the the SCLP ducumentation)
+ * because of the additional data structure described above.
+ */
+#define MAX_SCCB_ROOM (PAGE_SIZE - sizeof(struct sclp_buffer))
+
+/* Event type structure for write message and write priority message */
+static struct sclp_register sclp_rw_event = {
+	.send_mask = EvTyp_Msg_Mask | EvTyp_PMsgCmd_Mask
+};
+
+/*
+ * Setup a sclp write buffer. Gets a page as input (4K) and returns
+ * a pointer to a struct sclp_buffer structure that is located at the
+ * end of the input page. This reduces the buffer space by a few
+ * bytes but simplifies things.
+ */
+struct sclp_buffer *
+sclp_make_buffer(void *page, unsigned short columns, unsigned short htab)
+{
+	struct sclp_buffer *buffer;
+	struct write_sccb *sccb;
+
+	sccb = (struct write_sccb *) page;
+	/*
+	 * We keep the struct sclp_buffer structure at the end
+	 * of the sccb page.
+	 */
+	buffer = ((struct sclp_buffer *) ((addr_t) sccb + PAGE_SIZE)) - 1;
+	buffer->sccb = sccb;
+	buffer->retry_count = 0;
+	buffer->mto_number = 0;
+	buffer->mto_char_sum = 0;
+	buffer->current_line = NULL;
+	buffer->current_length = 0;
+	buffer->columns = columns;
+	buffer->htab = htab;
+
+	/* initialize sccb */
+	memset(sccb, 0, sizeof(struct write_sccb));
+	sccb->header.length = sizeof(struct write_sccb);
+	sccb->msg_buf.header.length = sizeof(struct msg_buf);
+	sccb->msg_buf.header.type = EvTyp_Msg;
+	sccb->msg_buf.mdb.header.length = sizeof(struct mdb);
+	sccb->msg_buf.mdb.header.type = 1;
+	sccb->msg_buf.mdb.header.tag = 0xD4C4C240;	/* ebcdic "MDB " */
+	sccb->msg_buf.mdb.header.revision_code = 1;
+	sccb->msg_buf.mdb.go.length = sizeof(struct go);
+	sccb->msg_buf.mdb.go.type = 1;
+
+	return buffer;
+}
+
+/*
+ * Return a pointer to the orignal page that has been used to create
+ * the buffer.
+ */
+void *
+sclp_unmake_buffer(struct sclp_buffer *buffer)
+{
+	return buffer->sccb;
+}
+
+/*
+ * Initialize a new Message Text Object (MTO) at the end of the provided buffer
+ * with enough room for max_len characters. Return 0 on success.
+ */
+static int
+sclp_initialize_mto(struct sclp_buffer *buffer, int max_len)
+{
+	struct write_sccb *sccb;
+	struct mto *mto;
+	int mto_size;
+
+	/* max size of new Message Text Object including message text  */
+	mto_size = sizeof(struct mto) + max_len;
+
+	/* check if current buffer sccb can contain the mto */
+	sccb = buffer->sccb;
+	if ((MAX_SCCB_ROOM - sccb->header.length) < mto_size)
+		return -ENOMEM;
+
+	/* find address of new message text object */
+	mto = (struct mto *)(((addr_t) sccb) + sccb->header.length);
+
+	/*
+	 * fill the new Message-Text Object,
+	 * starting behind the former last byte of the SCCB
+	 */
+	memset(mto, 0, sizeof(struct mto));
+	mto->length = sizeof(struct mto);
+	mto->type = 4;	/* message text object */
+	mto->line_type_flags = LnTpFlgs_EndText; /* end text */
+
+	/* set pointer to first byte after struct mto. */
+	buffer->current_line = (char *) (mto + 1);
+	buffer->current_length = 0;
+
+	return 0;
+}
+
+/*
+ * Finalize MTO initialized by sclp_initialize_mto(), updating the sizes of
+ * MTO, enclosing MDB, event buffer and SCCB.
+ */
+static void
+sclp_finalize_mto(struct sclp_buffer *buffer)
+{
+	struct write_sccb *sccb;
+	struct mto *mto;
+	int str_len, mto_size;
+
+	str_len = buffer->current_length;
+	buffer->current_line = NULL;
+	buffer->current_length = 0;
+
+	/* real size of new Message Text Object including message text	*/
+	mto_size = sizeof(struct mto) + str_len;
+
+	/* find address of new message text object */
+	sccb = buffer->sccb;
+	mto = (struct mto *)(((addr_t) sccb) + sccb->header.length);
+
+	/* set size of message text object */
+	mto->length = mto_size;
+
+	/*
+	 * update values of sizes
+	 * (SCCB, Event(Message) Buffer, Message Data Block)
+	 */
+	sccb->header.length += mto_size;
+	sccb->msg_buf.header.length += mto_size;
+	sccb->msg_buf.mdb.header.length += mto_size;
+
+	/*
+	 * count number of buffered messages (= number of Message Text
+	 * Objects) and number of buffered characters
+	 * for the SCCB currently used for buffering and at all
+	 */
+	buffer->mto_number++;
+	buffer->mto_char_sum += str_len;
+}
+
+/*
+ * processing of a message including escape characters,
+ * returns number of characters written to the output sccb
+ * ("processed" means that is not guaranteed that the character have already
+ *  been sent to the SCLP but that it will be done at least next time the SCLP
+ *  is not busy)
+ */
+int
+sclp_write(struct sclp_buffer *buffer, const unsigned char *msg, int count)
+{
+	int spaces, i_msg;
+	int rc;
+
+	/*
+	 * parse msg for escape sequences (\t,\v ...) and put formated
+	 * msg into an mto (created by sclp_initialize_mto).
+	 *
+	 * We have to do this work ourselfs because there is no support for
+	 * these characters on the native machine and only partial support
+	 * under VM (Why does VM interpret \n but the native machine doesn't ?)
+	 *
+	 * Depending on i/o-control setting the message is always written
+	 * immediately or we wait for a final new line maybe coming with the
+	 * next message. Besides we avoid a buffer overrun by writing its
+	 * content.
+	 *
+	 * RESTRICTIONS:
+	 *
+	 * \r and \b work within one line because we are not able to modify
+	 * previous output that have already been accepted by the SCLP.
+	 *
+	 * \t combined with following \r is not correctly represented because
+	 * \t is expanded to some spaces but \r does not know about a
+	 * previous \t and decreases the current position by one column.
+	 * This is in order to a slim and quick implementation.
+	 */
+	for (i_msg = 0; i_msg < count; i_msg++) {
+		switch (msg[i_msg]) {
+		case '\n':	/* new line, line feed (ASCII)	*/
+			/* check if new mto needs to be created */
+			if (buffer->current_line == NULL) {
+				rc = sclp_initialize_mto(buffer, 0);
+				if (rc)
+					return i_msg;
+			}
+			sclp_finalize_mto(buffer);
+			break;
+		case '\a':	/* bell, one for several times	*/
+			/* set SCLP sound alarm bit in General Object */
+			buffer->sccb->msg_buf.mdb.go.general_msg_flags |=
+				GnrlMsgFlgs_SndAlrm;
+			break;
+		case '\t':	/* horizontal tabulator	 */
+			/* check if new mto needs to be created */
+			if (buffer->current_line == NULL) {
+				rc = sclp_initialize_mto(buffer,
+							 buffer->columns);
+				if (rc)
+					return i_msg;
+			}
+			/* "go to (next htab-boundary + 1, same line)" */
+			do {
+				if (buffer->current_length >= buffer->columns)
+					break;
+				/* ok, add a blank */
+				*buffer->current_line++ = 0x40;
+				buffer->current_length++;
+			} while (buffer->current_length % buffer->htab);
+			break;
+		case '\f':	/* form feed  */
+		case '\v':	/* vertical tabulator  */
+			/* "go to (actual column, actual line + 1)" */
+			/* = new line, leading spaces */
+			if (buffer->current_line != NULL) {
+				spaces = buffer->current_length;
+				sclp_finalize_mto(buffer);
+				rc = sclp_initialize_mto(buffer,
+							 buffer->columns);
+				if (rc)
+					return i_msg;
+				memset(buffer->current_line, 0x40, spaces);
+				buffer->current_line += spaces;
+				buffer->current_length = spaces;
+			} else {
+				/* one an empty line this is the same as \n */
+				rc = sclp_initialize_mto(buffer,
+							 buffer->columns);
+				if (rc)
+					return i_msg;
+				sclp_finalize_mto(buffer);
+			}
+			break;
+		case '\b':	/* backspace  */
+			/* "go to (actual column - 1, actual line)" */
+			/* decrement counter indicating position, */
+			/* do not remove last character */
+			if (buffer->current_line != NULL &&
+			    buffer->current_length > 0) {
+				buffer->current_length--;
+				buffer->current_line--;
+			}
+			break;
+		case 0x00:	/* end of string  */
+			/* transfer current line to SCCB */
+			if (buffer->current_line != NULL)
+				sclp_finalize_mto(buffer);
+			/* skip the rest of the message including the 0 byte */
+			i_msg = count - 1;
+			break;
+		default:	/* no escape character	*/
+			/* do not output unprintable characters */
+			if (!isprint(msg[i_msg]))
+				break;
+			/* check if new mto needs to be created */
+			if (buffer->current_line == NULL) {
+				rc = sclp_initialize_mto(buffer,
+							 buffer->columns);
+				if (rc)
+					return i_msg;
+			}
+			*buffer->current_line++ = sclp_ascebc(msg[i_msg]);
+			buffer->current_length++;
+			break;
+		}
+		/* check if current mto is full */
+		if (buffer->current_line != NULL &&
+		    buffer->current_length >= buffer->columns)
+			sclp_finalize_mto(buffer);
+	}
+
+	/* return number of processed characters */
+	return i_msg;
+}
+
+/*
+ * Return the number of free bytes in the sccb
+ */
+int
+sclp_buffer_space(struct sclp_buffer *buffer)
+{
+	int count;
+
+	count = MAX_SCCB_ROOM - buffer->sccb->header.length;
+	if (buffer->current_line != NULL)
+		count -= sizeof(struct mto) + buffer->current_length;
+	return count;
+}
+
+/*
+ * Return number of characters in buffer
+ */
+int
+sclp_chars_in_buffer(struct sclp_buffer *buffer)
+{
+	int count;
+
+	count = buffer->mto_char_sum;
+	if (buffer->current_line != NULL)
+		count += buffer->current_length;
+	return count;
+}
+
+/*
+ * sets or provides some values that influence the drivers behaviour
+ */
+void
+sclp_set_columns(struct sclp_buffer *buffer, unsigned short columns)
+{
+	buffer->columns = columns;
+	if (buffer->current_line != NULL &&
+	    buffer->current_length > buffer->columns)
+		sclp_finalize_mto(buffer);
+}
+
+void
+sclp_set_htab(struct sclp_buffer *buffer, unsigned short htab)
+{
+	buffer->htab = htab;
+}
+
+/*
+ * called by sclp_console_init and/or sclp_tty_init
+ */
+int
+sclp_rw_init(void)
+{
+	static int init_done = 0;
+	int rc;
+
+	if (init_done)
+		return 0;
+
+	rc = sclp_register(&sclp_rw_event);
+	if (rc == 0)
+		init_done = 1;
+	return rc;
+}
+
+#define SCLP_BUFFER_MAX_RETRY		1
+
+/*
+ * second half of Write Event Data-function that has to be done after
+ * interruption indicating completion of Service Call.
+ */
+static void
+sclp_writedata_callback(struct sclp_req *request, void *data)
+{
+	int rc;
+	struct sclp_buffer *buffer;
+	struct write_sccb *sccb;
+
+	buffer = (struct sclp_buffer *) data;
+	sccb = buffer->sccb;
+
+	if (request->status == SCLP_REQ_FAILED) {
+		if (buffer->callback != NULL)
+			buffer->callback(buffer, -EIO);
+		return;
+	}
+	/* check SCLP response code and choose suitable action	*/
+	switch (sccb->header.response_code) {
+	case 0x0020 :
+		/* Normal completion, buffer processed, message(s) sent */
+		rc = 0;
+		break;
+
+	case 0x0340: /* Contained SCLP equipment check */
+		if (++buffer->retry_count > SCLP_BUFFER_MAX_RETRY) {
+			rc = -EIO;
+			break;
+		}
+		/* remove processed buffers and requeue rest */
+		if (sclp_remove_processed((struct sccb_header *) sccb) > 0) {
+			/* not all buffers were processed */
+			sccb->header.response_code = 0x0000;
+			buffer->request.status = SCLP_REQ_FILLED;
+			rc = sclp_add_request(request);
+			if (rc == 0)
+				return;
+		} else
+			rc = 0;
+		break;
+
+	case 0x0040: /* SCLP equipment check */
+	case 0x05f0: /* Target resource in improper state */
+		if (++buffer->retry_count > SCLP_BUFFER_MAX_RETRY) {
+			rc = -EIO;
+			break;
+		}
+		/* retry request */
+		sccb->header.response_code = 0x0000;
+		buffer->request.status = SCLP_REQ_FILLED;
+		rc = sclp_add_request(request);
+		if (rc == 0)
+			return;
+		break;
+	default:
+		if (sccb->header.response_code == 0x71f0)
+			rc = -ENOMEM;
+		else
+			rc = -EINVAL;
+		break;
+	}
+	if (buffer->callback != NULL)
+		buffer->callback(buffer, rc);
+}
+
+/*
+ * Setup the request structure in the struct sclp_buffer to do SCLP Write
+ * Event Data and pass the request to the core SCLP loop. Return zero on
+ * success, non-zero otherwise.
+ */
+int
+sclp_emit_buffer(struct sclp_buffer *buffer,
+		 void (*callback)(struct sclp_buffer *, int))
+{
+	struct write_sccb *sccb;
+
+	/* add current line if there is one */
+	if (buffer->current_line != NULL)
+		sclp_finalize_mto(buffer);
+
+	/* Are there messages in the output buffer ? */
+	if (buffer->mto_number == 0)
+		return -EIO;
+
+	sccb = buffer->sccb;
+	if (sclp_rw_event.sclp_send_mask & EvTyp_Msg_Mask)
+		/* Use normal write message */
+		sccb->msg_buf.header.type = EvTyp_Msg;
+	else if (sclp_rw_event.sclp_send_mask & EvTyp_PMsgCmd_Mask)
+		/* Use write priority message */
+		sccb->msg_buf.header.type = EvTyp_PMsgCmd;
+	else
+		return -ENOSYS;
+	buffer->request.command = SCLP_CMDW_WRITEDATA;
+	buffer->request.status = SCLP_REQ_FILLED;
+	buffer->request.callback = sclp_writedata_callback;
+	buffer->request.callback_data = buffer;
+	buffer->request.sccb = sccb;
+	buffer->callback = callback;
+	return sclp_add_request(&buffer->request);
+}
diff --git a/drivers/s390/char/sclp_rw.h b/drivers/s390/char/sclp_rw.h
new file mode 100644
index 0000000..6aa7a69
--- /dev/null
+++ b/drivers/s390/char/sclp_rw.h
@@ -0,0 +1,96 @@
+/*
+ *  drivers/s390/char/sclp_rw.h
+ *    interface to the SCLP-read/write driver
+ *
+ *  S390 version
+ *    Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *    Author(s): Martin Peschke <mpeschke@de.ibm.com>
+ *		 Martin Schwidefsky <schwidefsky@de.ibm.com>
+ */
+
+#ifndef __SCLP_RW_H__
+#define __SCLP_RW_H__
+
+#include <linux/list.h>
+
+struct mto {
+	u16 length;
+	u16 type;
+	u16 line_type_flags;
+	u8  alarm_control;
+	u8  _reserved[3];
+} __attribute__((packed));
+
+struct go {
+	u16 length;
+	u16 type;
+	u32 domid;
+	u8  hhmmss_time[8];
+	u8  th_time[3];
+	u8  reserved_0;
+	u8  dddyyyy_date[7];
+	u8  _reserved_1;
+	u16 general_msg_flags;
+	u8  _reserved_2[10];
+	u8  originating_system_name[8];
+	u8  job_guest_name[8];
+} __attribute__((packed));
+
+struct mdb_header {
+	u16 length;
+	u16 type;
+	u32 tag;
+	u32 revision_code;
+} __attribute__((packed));
+
+struct mdb {
+	struct mdb_header header;
+	struct go go;
+} __attribute__((packed));
+
+struct msg_buf {
+	struct evbuf_header header;
+	struct mdb mdb;
+} __attribute__((packed));
+
+struct write_sccb {
+	struct sccb_header header;
+	struct msg_buf msg_buf;
+} __attribute__((packed));
+
+/* The number of empty mto buffers that can be contained in a single sccb. */
+#define NR_EMPTY_MTO_PER_SCCB ((PAGE_SIZE - sizeof(struct sclp_buffer) - \
+			sizeof(struct write_sccb)) / sizeof(struct mto))
+
+/*
+ * data structure for information about list of SCCBs (only for writing),
+ * will be located at the end of a SCCBs page
+ */
+struct sclp_buffer {
+	struct list_head list;		/* list_head for sccb_info chain */
+	struct sclp_req request;
+	struct write_sccb *sccb;
+	char *current_line;
+	int current_length;
+	int retry_count;
+	/* output format settings */
+	unsigned short columns;
+	unsigned short htab;
+	/* statistics about this buffer */
+	unsigned int mto_char_sum;	/* # chars in sccb */
+	unsigned int mto_number;	/* # mtos in sccb */
+	/* Callback that is called after reaching final status. */
+	void (*callback)(struct sclp_buffer *, int);
+};
+
+int sclp_rw_init(void);
+struct sclp_buffer *sclp_make_buffer(void *, unsigned short, unsigned short);
+void *sclp_unmake_buffer(struct sclp_buffer *);
+int sclp_buffer_space(struct sclp_buffer *);
+int sclp_write(struct sclp_buffer *buffer, const unsigned char *, int);
+int sclp_emit_buffer(struct sclp_buffer *,void (*)(struct sclp_buffer *,int));
+void sclp_set_columns(struct sclp_buffer *, unsigned short);
+void sclp_set_htab(struct sclp_buffer *, unsigned short);
+int sclp_chars_in_buffer(struct sclp_buffer *);
+
+#endif	/* __SCLP_RW_H__ */
diff --git a/drivers/s390/char/sclp_tty.c b/drivers/s390/char/sclp_tty.c
new file mode 100644
index 0000000..a20d7c89
--- /dev/null
+++ b/drivers/s390/char/sclp_tty.c
@@ -0,0 +1,813 @@
+/*
+ *  drivers/s390/char/sclp_tty.c
+ *    SCLP line mode terminal driver.
+ *
+ *  S390 version
+ *    Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *    Author(s): Martin Peschke <mpeschke@de.ibm.com>
+ *		 Martin Schwidefsky <schwidefsky@de.ibm.com>
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kmod.h>
+#include <linux/tty.h>
+#include <linux/tty_driver.h>
+#include <linux/sched.h>
+#include <linux/wait.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <asm/uaccess.h>
+
+#include "ctrlchar.h"
+#include "sclp.h"
+#include "sclp_rw.h"
+#include "sclp_tty.h"
+
+#define SCLP_TTY_PRINT_HEADER "sclp tty driver: "
+
+/*
+ * size of a buffer that collects single characters coming in
+ * via sclp_tty_put_char()
+ */
+#define SCLP_TTY_BUF_SIZE 512
+
+/*
+ * There is exactly one SCLP terminal, so we can keep things simple
+ * and allocate all variables statically.
+ */
+
+/* Lock to guard over changes to global variables. */
+static spinlock_t sclp_tty_lock;
+/* List of free pages that can be used for console output buffering. */
+static struct list_head sclp_tty_pages;
+/* List of full struct sclp_buffer structures ready for output. */
+static struct list_head sclp_tty_outqueue;
+/* Counter how many buffers are emitted. */
+static int sclp_tty_buffer_count;
+/* Pointer to current console buffer. */
+static struct sclp_buffer *sclp_ttybuf;
+/* Timer for delayed output of console messages. */
+static struct timer_list sclp_tty_timer;
+/* Waitqueue to wait for buffers to get empty. */
+static wait_queue_head_t sclp_tty_waitq;
+
+static struct tty_struct *sclp_tty;
+static unsigned char sclp_tty_chars[SCLP_TTY_BUF_SIZE];
+static unsigned short int sclp_tty_chars_count;
+
+struct tty_driver *sclp_tty_driver;
+
+extern struct termios  tty_std_termios;
+
+static struct sclp_ioctls sclp_ioctls;
+static struct sclp_ioctls sclp_ioctls_init =
+{
+	8,			/* 1 hor. tab. = 8 spaces */
+	0,			/* no echo of input by this driver */
+	80,			/* 80 characters/line */
+	1,			/* write after 1/10 s without final new line */
+	MAX_KMEM_PAGES,		/* quick fix: avoid __alloc_pages */
+	MAX_KMEM_PAGES,		/* take 32/64 pages from kernel memory, */
+	0,			/* do not convert to lower case */
+	0x6c			/* to seprate upper and lower case */
+				/* ('%' in EBCDIC) */
+};
+
+/* This routine is called whenever we try to open a SCLP terminal. */
+static int
+sclp_tty_open(struct tty_struct *tty, struct file *filp)
+{
+	sclp_tty = tty;
+	tty->driver_data = NULL;
+	tty->low_latency = 0;
+	return 0;
+}
+
+/* This routine is called when the SCLP terminal is closed. */
+static void
+sclp_tty_close(struct tty_struct *tty, struct file *filp)
+{
+	if (tty->count > 1)
+		return;
+	sclp_tty = NULL;
+}
+
+/* execute commands to control the i/o behaviour of the SCLP tty at runtime */
+static int
+sclp_tty_ioctl(struct tty_struct *tty, struct file * file,
+	       unsigned int cmd, unsigned long arg)
+{
+	unsigned long flags;
+	unsigned int obuf;
+	int check;
+	int rc;
+
+	if (tty->flags & (1 << TTY_IO_ERROR))
+		return -EIO;
+	rc = 0;
+	check = 0;
+	switch (cmd) {
+	case TIOCSCLPSHTAB:
+		/* set width of horizontal tab	*/
+		if (get_user(sclp_ioctls.htab, (unsigned short __user *) arg))
+			rc = -EFAULT;
+		else
+			check = 1;
+		break;
+	case TIOCSCLPGHTAB:
+		/* get width of horizontal tab	*/
+		if (put_user(sclp_ioctls.htab, (unsigned short __user *) arg))
+			rc = -EFAULT;
+		break;
+	case TIOCSCLPSECHO:
+		/* enable/disable echo of input */
+		if (get_user(sclp_ioctls.echo, (unsigned char __user *) arg))
+			rc = -EFAULT;
+		break;
+	case TIOCSCLPGECHO:
+		/* Is echo of input enabled ?  */
+		if (put_user(sclp_ioctls.echo, (unsigned char __user *) arg))
+			rc = -EFAULT;
+		break;
+	case TIOCSCLPSCOLS:
+		/* set number of columns for output  */
+		if (get_user(sclp_ioctls.columns, (unsigned short __user *) arg))
+			rc = -EFAULT;
+		else
+			check = 1;
+		break;
+	case TIOCSCLPGCOLS:
+		/* get number of columns for output  */
+		if (put_user(sclp_ioctls.columns, (unsigned short __user *) arg))
+			rc = -EFAULT;
+		break;
+	case TIOCSCLPSNL:
+		/* enable/disable writing without final new line character  */
+		if (get_user(sclp_ioctls.final_nl, (signed char __user *) arg))
+			rc = -EFAULT;
+		break;
+	case TIOCSCLPGNL:
+		/* Is writing without final new line character enabled ?  */
+		if (put_user(sclp_ioctls.final_nl, (signed char __user *) arg))
+			rc = -EFAULT;
+		break;
+	case TIOCSCLPSOBUF:
+		/*
+		 * set the maximum buffers size for output, will be rounded
+		 * up to next 4kB boundary and stored as number of SCCBs
+		 * (4kB Buffers) limitation: 256 x 4kB
+		 */
+		if (get_user(obuf, (unsigned int __user *) arg) == 0) {
+			if (obuf & 0xFFF)
+				sclp_ioctls.max_sccb = (obuf >> 12) + 1;
+			else
+				sclp_ioctls.max_sccb = (obuf >> 12);
+		} else
+			rc = -EFAULT;
+		break;
+	case TIOCSCLPGOBUF:
+		/* get the maximum buffers size for output  */
+		obuf = sclp_ioctls.max_sccb << 12;
+		if (put_user(obuf, (unsigned int __user *) arg))
+			rc = -EFAULT;
+		break;
+	case TIOCSCLPGKBUF:
+		/* get the number of buffers got from kernel at startup */
+		if (put_user(sclp_ioctls.kmem_sccb, (unsigned short __user *) arg))
+			rc = -EFAULT;
+		break;
+	case TIOCSCLPSCASE:
+		/* enable/disable conversion from upper to lower case */
+		if (get_user(sclp_ioctls.tolower, (unsigned char __user *) arg))
+			rc = -EFAULT;
+		break;
+	case TIOCSCLPGCASE:
+		/* Is conversion from upper to lower case of input enabled? */
+		if (put_user(sclp_ioctls.tolower, (unsigned char __user *) arg))
+			rc = -EFAULT;
+		break;
+	case TIOCSCLPSDELIM:
+		/*
+		 * set special character used for separating upper and
+		 * lower case, 0x00 disables this feature
+		 */
+		if (get_user(sclp_ioctls.delim, (unsigned char __user *) arg))
+			rc = -EFAULT;
+		break;
+	case TIOCSCLPGDELIM:
+		/*
+		 * get special character used for separating upper and
+		 * lower case, 0x00 disables this feature
+		 */
+		if (put_user(sclp_ioctls.delim, (unsigned char __user *) arg))
+			rc = -EFAULT;
+		break;
+	case TIOCSCLPSINIT:
+		/* set initial (default) sclp ioctls  */
+		sclp_ioctls = sclp_ioctls_init;
+		check = 1;
+		break;
+	default:
+		rc = -ENOIOCTLCMD;
+		break;
+	}
+	if (check) {
+		spin_lock_irqsave(&sclp_tty_lock, flags);
+		if (sclp_ttybuf != NULL) {
+			sclp_set_htab(sclp_ttybuf, sclp_ioctls.htab);
+			sclp_set_columns(sclp_ttybuf, sclp_ioctls.columns);
+		}
+		spin_unlock_irqrestore(&sclp_tty_lock, flags);
+	}
+	return rc;
+}
+
+/*
+ * This routine returns the numbers of characters the tty driver
+ * will accept for queuing to be written.  This number is subject
+ * to change as output buffers get emptied, or if the output flow
+ * control is acted. This is not an exact number because not every
+ * character needs the same space in the sccb. The worst case is
+ * a string of newlines. Every newlines creates a new mto which
+ * needs 8 bytes.
+ */
+static int
+sclp_tty_write_room (struct tty_struct *tty)
+{
+	unsigned long flags;
+	struct list_head *l;
+	int count;
+
+	spin_lock_irqsave(&sclp_tty_lock, flags);
+	count = 0;
+	if (sclp_ttybuf != NULL)
+		count = sclp_buffer_space(sclp_ttybuf) / sizeof(struct mto);
+	list_for_each(l, &sclp_tty_pages)
+		count += NR_EMPTY_MTO_PER_SCCB;
+	spin_unlock_irqrestore(&sclp_tty_lock, flags);
+	return count;
+}
+
+static void
+sclp_ttybuf_callback(struct sclp_buffer *buffer, int rc)
+{
+	unsigned long flags;
+	void *page;
+
+	do {
+		page = sclp_unmake_buffer(buffer);
+		spin_lock_irqsave(&sclp_tty_lock, flags);
+		/* Remove buffer from outqueue */
+		list_del(&buffer->list);
+		sclp_tty_buffer_count--;
+		list_add_tail((struct list_head *) page, &sclp_tty_pages);
+		/* Check if there is a pending buffer on the out queue. */
+		buffer = NULL;
+		if (!list_empty(&sclp_tty_outqueue))
+			buffer = list_entry(sclp_tty_outqueue.next,
+					    struct sclp_buffer, list);
+		spin_unlock_irqrestore(&sclp_tty_lock, flags);
+	} while (buffer && sclp_emit_buffer(buffer, sclp_ttybuf_callback));
+	wake_up(&sclp_tty_waitq);
+	/* check if the tty needs a wake up call */
+	if (sclp_tty != NULL) {
+		tty_wakeup(sclp_tty);
+	}
+}
+
+static inline void
+__sclp_ttybuf_emit(struct sclp_buffer *buffer)
+{
+	unsigned long flags;
+	int count;
+	int rc;
+
+	spin_lock_irqsave(&sclp_tty_lock, flags);
+	list_add_tail(&buffer->list, &sclp_tty_outqueue);
+	count = sclp_tty_buffer_count++;
+	spin_unlock_irqrestore(&sclp_tty_lock, flags);
+	if (count)
+		return;
+	rc = sclp_emit_buffer(buffer, sclp_ttybuf_callback);
+	if (rc)
+		sclp_ttybuf_callback(buffer, rc);
+}
+
+/*
+ * When this routine is called from the timer then we flush the
+ * temporary write buffer.
+ */
+static void
+sclp_tty_timeout(unsigned long data)
+{
+	unsigned long flags;
+	struct sclp_buffer *buf;
+
+	spin_lock_irqsave(&sclp_tty_lock, flags);
+	buf = sclp_ttybuf;
+	sclp_ttybuf = NULL;
+	spin_unlock_irqrestore(&sclp_tty_lock, flags);
+
+	if (buf != NULL) {
+		__sclp_ttybuf_emit(buf);
+	}
+}
+
+/*
+ * Write a string to the sclp tty.
+ */
+static void
+sclp_tty_write_string(const unsigned char *str, int count)
+{
+	unsigned long flags;
+	void *page;
+	int written;
+	struct sclp_buffer *buf;
+
+	if (count <= 0)
+		return;
+	spin_lock_irqsave(&sclp_tty_lock, flags);
+	do {
+		/* Create a sclp output buffer if none exists yet */
+		if (sclp_ttybuf == NULL) {
+			while (list_empty(&sclp_tty_pages)) {
+				spin_unlock_irqrestore(&sclp_tty_lock, flags);
+				if (in_interrupt())
+					sclp_sync_wait();
+				else
+					wait_event(sclp_tty_waitq,
+						!list_empty(&sclp_tty_pages));
+				spin_lock_irqsave(&sclp_tty_lock, flags);
+			}
+			page = sclp_tty_pages.next;
+			list_del((struct list_head *) page);
+			sclp_ttybuf = sclp_make_buffer(page,
+						       sclp_ioctls.columns,
+						       sclp_ioctls.htab);
+		}
+		/* try to write the string to the current output buffer */
+		written = sclp_write(sclp_ttybuf, str, count);
+		if (written == count)
+			break;
+		/*
+		 * Not all characters could be written to the current
+		 * output buffer. Emit the buffer, create a new buffer
+		 * and then output the rest of the string.
+		 */
+		buf = sclp_ttybuf;
+		sclp_ttybuf = NULL;
+		spin_unlock_irqrestore(&sclp_tty_lock, flags);
+		__sclp_ttybuf_emit(buf);
+		spin_lock_irqsave(&sclp_tty_lock, flags);
+		str += written;
+		count -= written;
+	} while (count > 0);
+	/* Setup timer to output current console buffer after 1/10 second */
+	if (sclp_ioctls.final_nl) {
+		if (sclp_ttybuf != NULL &&
+		    sclp_chars_in_buffer(sclp_ttybuf) != 0 &&
+		    !timer_pending(&sclp_tty_timer)) {
+			init_timer(&sclp_tty_timer);
+			sclp_tty_timer.function = sclp_tty_timeout;
+			sclp_tty_timer.data = 0UL;
+			sclp_tty_timer.expires = jiffies + HZ/10;
+			add_timer(&sclp_tty_timer);
+		}
+	} else {
+		if (sclp_ttybuf != NULL &&
+		    sclp_chars_in_buffer(sclp_ttybuf) != 0) {
+			buf = sclp_ttybuf;
+			sclp_ttybuf = NULL;
+			spin_unlock_irqrestore(&sclp_tty_lock, flags);
+			__sclp_ttybuf_emit(buf);
+			spin_lock_irqsave(&sclp_tty_lock, flags);
+		}
+	}
+	spin_unlock_irqrestore(&sclp_tty_lock, flags);
+}
+
+/*
+ * This routine is called by the kernel to write a series of characters to the
+ * tty device. The characters may come from user space or kernel space. This
+ * routine will return the number of characters actually accepted for writing.
+ */
+static int
+sclp_tty_write(struct tty_struct *tty, const unsigned char *buf, int count)
+{
+	if (sclp_tty_chars_count > 0) {
+		sclp_tty_write_string(sclp_tty_chars, sclp_tty_chars_count);
+		sclp_tty_chars_count = 0;
+	}
+	sclp_tty_write_string(buf, count);
+	return count;
+}
+
+/*
+ * This routine is called by the kernel to write a single character to the tty
+ * device. If the kernel uses this routine, it must call the flush_chars()
+ * routine (if defined) when it is done stuffing characters into the driver.
+ *
+ * Characters provided to sclp_tty_put_char() are buffered by the SCLP driver.
+ * If the given character is a '\n' the contents of the SCLP write buffer
+ * - including previous characters from sclp_tty_put_char() and strings from
+ * sclp_write() without final '\n' - will be written.
+ */
+static void
+sclp_tty_put_char(struct tty_struct *tty, unsigned char ch)
+{
+	sclp_tty_chars[sclp_tty_chars_count++] = ch;
+	if (ch == '\n' || sclp_tty_chars_count >= SCLP_TTY_BUF_SIZE) {
+		sclp_tty_write_string(sclp_tty_chars, sclp_tty_chars_count);
+		sclp_tty_chars_count = 0;
+	}
+}
+
+/*
+ * This routine is called by the kernel after it has written a series of
+ * characters to the tty device using put_char().
+ */
+static void
+sclp_tty_flush_chars(struct tty_struct *tty)
+{
+	if (sclp_tty_chars_count > 0) {
+		sclp_tty_write_string(sclp_tty_chars, sclp_tty_chars_count);
+		sclp_tty_chars_count = 0;
+	}
+}
+
+/*
+ * This routine returns the number of characters in the write buffer of the
+ * SCLP driver. The provided number includes all characters that are stored
+ * in the SCCB (will be written next time the SCLP is not busy) as well as
+ * characters in the write buffer (will not be written as long as there is a
+ * final line feed missing).
+ */
+static int
+sclp_tty_chars_in_buffer(struct tty_struct *tty)
+{
+	unsigned long flags;
+	struct list_head *l;
+	struct sclp_buffer *t;
+	int count;
+
+	spin_lock_irqsave(&sclp_tty_lock, flags);
+	count = 0;
+	if (sclp_ttybuf != NULL)
+		count = sclp_chars_in_buffer(sclp_ttybuf);
+	list_for_each(l, &sclp_tty_outqueue) {
+		t = list_entry(l, struct sclp_buffer, list);
+		count += sclp_chars_in_buffer(t);
+	}
+	spin_unlock_irqrestore(&sclp_tty_lock, flags);
+	return count;
+}
+
+/*
+ * removes all content from buffers of low level driver
+ */
+static void
+sclp_tty_flush_buffer(struct tty_struct *tty)
+{
+	if (sclp_tty_chars_count > 0) {
+		sclp_tty_write_string(sclp_tty_chars, sclp_tty_chars_count);
+		sclp_tty_chars_count = 0;
+	}
+}
+
+/*
+ * push input to tty
+ */
+static void
+sclp_tty_input(unsigned char* buf, unsigned int count)
+{
+	unsigned int cchar;
+
+	/*
+	 * If this tty driver is currently closed
+	 * then throw the received input away.
+	 */
+	if (sclp_tty == NULL)
+		return;
+	cchar = ctrlchar_handle(buf, count, sclp_tty);
+	switch (cchar & CTRLCHAR_MASK) {
+	case CTRLCHAR_SYSRQ:
+		break;
+	case CTRLCHAR_CTRL:
+		sclp_tty->flip.count++;
+		*sclp_tty->flip.flag_buf_ptr++ = TTY_NORMAL;
+		*sclp_tty->flip.char_buf_ptr++ = cchar;
+		tty_flip_buffer_push(sclp_tty);
+		break;
+	case CTRLCHAR_NONE:
+		/* send (normal) input to line discipline */
+		memcpy(sclp_tty->flip.char_buf_ptr, buf, count);
+		if (count < 2 ||
+		    (strncmp ((const char *) buf + count - 2, "^n", 2) &&
+		     strncmp ((const char *) buf + count - 2, "\0252n", 2))) {
+			sclp_tty->flip.char_buf_ptr[count] = '\n';
+			count++;
+		} else
+			count -= 2;
+		memset(sclp_tty->flip.flag_buf_ptr, TTY_NORMAL, count);
+		sclp_tty->flip.char_buf_ptr += count;
+		sclp_tty->flip.flag_buf_ptr += count;
+		sclp_tty->flip.count += count;
+		tty_flip_buffer_push(sclp_tty);
+		break;
+	}
+}
+
+/*
+ * get a EBCDIC string in upper/lower case,
+ * find out characters in lower/upper case separated by a special character,
+ * modifiy original string,
+ * returns length of resulting string
+ */
+static int
+sclp_switch_cases(unsigned char *buf, int count,
+		  unsigned char delim, int tolower)
+{
+	unsigned char *ip, *op;
+	int toggle;
+
+	/* initially changing case is off */
+	toggle = 0;
+	ip = op = buf;
+	while (count-- > 0) {
+		/* compare with special character */
+		if (*ip == delim) {
+			/* followed by another special character? */
+			if (count && ip[1] == delim) {
+				/*
+				 * ... then put a single copy of the special
+				 * character to the output string
+				 */
+				*op++ = *ip++;
+				count--;
+			} else
+				/*
+				 * ... special character follower by a normal
+				 * character toggles the case change behaviour
+				 */
+				toggle = ~toggle;
+			/* skip special character */
+			ip++;
+		} else
+			/* not the special character */
+			if (toggle)
+				/* but case switching is on */
+				if (tolower)
+					/* switch to uppercase */
+					*op++ = _ebc_toupper[(int) *ip++];
+				else
+					/* switch to lowercase */
+					*op++ = _ebc_tolower[(int) *ip++];
+			else
+				/* no case switching, copy the character */
+				*op++ = *ip++;
+	}
+	/* return length of reformatted string. */
+	return op - buf;
+}
+
+static void
+sclp_get_input(unsigned char *start, unsigned char *end)
+{
+	int count;
+
+	count = end - start;
+	/*
+	 * if set in ioctl convert EBCDIC to lower case
+	 * (modify original input in SCCB)
+	 */
+	if (sclp_ioctls.tolower)
+		EBC_TOLOWER(start, count);
+
+	/*
+	 * if set in ioctl find out characters in lower or upper case
+	 * (depends on current case) separated by a special character,
+	 * works on EBCDIC
+	 */
+	if (sclp_ioctls.delim)
+		count = sclp_switch_cases(start, count,
+					  sclp_ioctls.delim,
+					  sclp_ioctls.tolower);
+
+	/* convert EBCDIC to ASCII (modify original input in SCCB) */
+	sclp_ebcasc_str(start, count);
+
+	/* if set in ioctl write operators input to console  */
+	if (sclp_ioctls.echo)
+		sclp_tty_write(sclp_tty, start, count);
+
+	/* transfer input to high level driver */
+	sclp_tty_input(start, count);
+}
+
+static inline struct gds_vector *
+find_gds_vector(struct gds_vector *start, struct gds_vector *end, u16 id)
+{
+	struct gds_vector *vec;
+
+	for (vec = start; vec < end; vec = (void *) vec + vec->length)
+		if (vec->gds_id == id)
+			return vec;
+	return NULL;
+}
+
+static inline struct gds_subvector *
+find_gds_subvector(struct gds_subvector *start,
+		   struct gds_subvector *end, u8 key)
+{
+	struct gds_subvector *subvec;
+
+	for (subvec = start; subvec < end;
+	     subvec = (void *) subvec + subvec->length)
+		if (subvec->key == key)
+			return subvec;
+	return NULL;
+}
+
+static inline void
+sclp_eval_selfdeftextmsg(struct gds_subvector *start,
+			 struct gds_subvector *end)
+{
+	struct gds_subvector *subvec;
+
+	subvec = start;
+	while (subvec < end) {
+		subvec = find_gds_subvector(subvec, end, 0x30);
+		if (!subvec)
+			break;
+		sclp_get_input((unsigned char *)(subvec + 1),
+			       (unsigned char *) subvec + subvec->length);
+		subvec = (void *) subvec + subvec->length;
+	}
+}
+
+static inline void
+sclp_eval_textcmd(struct gds_subvector *start,
+		  struct gds_subvector *end)
+{
+	struct gds_subvector *subvec;
+
+	subvec = start;
+	while (subvec < end) {
+		subvec = find_gds_subvector(subvec, end,
+					    GDS_KEY_SelfDefTextMsg);
+		if (!subvec)
+			break;
+		sclp_eval_selfdeftextmsg((struct gds_subvector *)(subvec + 1),
+					 (void *)subvec + subvec->length);
+		subvec = (void *) subvec + subvec->length;
+	}
+}
+
+static inline void
+sclp_eval_cpmsu(struct gds_vector *start, struct gds_vector *end)
+{
+	struct gds_vector *vec;
+
+	vec = start;
+	while (vec < end) {
+		vec = find_gds_vector(vec, end, GDS_ID_TextCmd);
+		if (!vec)
+			break;
+		sclp_eval_textcmd((struct gds_subvector *)(vec + 1),
+				  (void *) vec + vec->length);
+		vec = (void *) vec + vec->length;
+	}
+}
+
+
+static inline void
+sclp_eval_mdsmu(struct gds_vector *start, void *end)
+{
+	struct gds_vector *vec;
+
+	vec = find_gds_vector(start, end, GDS_ID_CPMSU);
+	if (vec)
+		sclp_eval_cpmsu(vec + 1, (void *) vec + vec->length);
+}
+
+static void
+sclp_tty_receiver(struct evbuf_header *evbuf)
+{
+	struct gds_vector *start, *end, *vec;
+
+	start = (struct gds_vector *)(evbuf + 1);
+	end = (void *) evbuf + evbuf->length;
+	vec = find_gds_vector(start, end, GDS_ID_MDSMU);
+	if (vec)
+		sclp_eval_mdsmu(vec + 1, (void *) vec + vec->length);
+}
+
+static void
+sclp_tty_state_change(struct sclp_register *reg)
+{
+}
+
+static struct sclp_register sclp_input_event =
+{
+	.receive_mask = EvTyp_OpCmd_Mask | EvTyp_PMsgCmd_Mask,
+	.state_change_fn = sclp_tty_state_change,
+	.receiver_fn = sclp_tty_receiver
+};
+
+static struct tty_operations sclp_ops = {
+	.open = sclp_tty_open,
+	.close = sclp_tty_close,
+	.write = sclp_tty_write,
+	.put_char = sclp_tty_put_char,
+	.flush_chars = sclp_tty_flush_chars,
+	.write_room = sclp_tty_write_room,
+	.chars_in_buffer = sclp_tty_chars_in_buffer,
+	.flush_buffer = sclp_tty_flush_buffer,
+	.ioctl = sclp_tty_ioctl,
+};
+
+int __init
+sclp_tty_init(void)
+{
+	struct tty_driver *driver;
+	void *page;
+	int i;
+	int rc;
+
+	if (!CONSOLE_IS_SCLP)
+		return 0;
+	driver = alloc_tty_driver(1);
+	if (!driver)
+		return -ENOMEM;
+
+	rc = sclp_rw_init();
+	if (rc) {
+		printk(KERN_ERR SCLP_TTY_PRINT_HEADER
+		       "could not register tty - "
+		       "sclp_rw_init returned %d\n", rc);
+		put_tty_driver(driver);
+		return rc;
+	}
+	/* Allocate pages for output buffering */
+	INIT_LIST_HEAD(&sclp_tty_pages);
+	for (i = 0; i < MAX_KMEM_PAGES; i++) {
+		page = (void *) get_zeroed_page(GFP_KERNEL | GFP_DMA);
+		if (page == NULL) {
+			put_tty_driver(driver);
+			return -ENOMEM;
+		}
+		list_add_tail((struct list_head *) page, &sclp_tty_pages);
+	}
+	INIT_LIST_HEAD(&sclp_tty_outqueue);
+	spin_lock_init(&sclp_tty_lock);
+	init_waitqueue_head(&sclp_tty_waitq);
+	init_timer(&sclp_tty_timer);
+	sclp_ttybuf = NULL;
+	sclp_tty_buffer_count = 0;
+	if (MACHINE_IS_VM) {
+		/*
+		 * save 4 characters for the CPU number
+		 * written at start of each line by VM/CP
+		 */
+		sclp_ioctls_init.columns = 76;
+		/* case input lines to lowercase */
+		sclp_ioctls_init.tolower = 1;
+	}
+	sclp_ioctls = sclp_ioctls_init;
+	sclp_tty_chars_count = 0;
+	sclp_tty = NULL;
+
+	rc = sclp_register(&sclp_input_event);
+	if (rc) {
+		put_tty_driver(driver);
+		return rc;
+	}
+
+	driver->owner = THIS_MODULE;
+	driver->driver_name = "sclp_line";
+	driver->name = "sclp_line";
+	driver->major = TTY_MAJOR;
+	driver->minor_start = 64;
+	driver->type = TTY_DRIVER_TYPE_SYSTEM;
+	driver->subtype = SYSTEM_TYPE_TTY;
+	driver->init_termios = tty_std_termios;
+	driver->init_termios.c_iflag = IGNBRK | IGNPAR;
+	driver->init_termios.c_oflag = ONLCR | XTABS;
+	driver->init_termios.c_lflag = ISIG | ECHO;
+	driver->flags = TTY_DRIVER_REAL_RAW;
+	tty_set_operations(driver, &sclp_ops);
+	rc = tty_register_driver(driver);
+	if (rc) {
+		printk(KERN_ERR SCLP_TTY_PRINT_HEADER
+		       "could not register tty - "
+		       "tty_register_driver returned %d\n", rc);
+		put_tty_driver(driver);
+		return rc;
+	}
+	sclp_tty_driver = driver;
+	return 0;
+}
+module_init(sclp_tty_init);
diff --git a/drivers/s390/char/sclp_tty.h b/drivers/s390/char/sclp_tty.h
new file mode 100644
index 0000000..0ce2c1f
--- /dev/null
+++ b/drivers/s390/char/sclp_tty.h
@@ -0,0 +1,71 @@
+/*
+ *  drivers/s390/char/sclp_tty.h
+ *    interface to the SCLP-read/write driver
+ *
+ *  S390 version
+ *    Copyright (C) 1999 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *    Author(s): Martin Peschke <mpeschke@de.ibm.com>
+ *		 Martin Schwidefsky <schwidefsky@de.ibm.com>
+ */
+
+#ifndef __SCLP_TTY_H__
+#define __SCLP_TTY_H__
+
+#include <linux/ioctl.h>
+#include <linux/termios.h>
+#include <linux/tty_driver.h>
+
+/* This is the type of data structures storing sclp ioctl setting. */
+struct sclp_ioctls {
+	unsigned short htab;
+	unsigned char echo;
+	unsigned short columns;
+	unsigned char final_nl;
+	unsigned short max_sccb;
+	unsigned short kmem_sccb;	/* can't be modified at run time */
+	unsigned char tolower;
+	unsigned char delim;
+};
+
+/* must be unique, FIXME: must be added in Documentation/ioctl_number.txt */
+#define SCLP_IOCTL_LETTER 'B'
+
+/* set width of horizontal tabulator */
+#define TIOCSCLPSHTAB	_IOW(SCLP_IOCTL_LETTER, 0, unsigned short)
+/* enable/disable echo of input (independent from line discipline) */
+#define TIOCSCLPSECHO	_IOW(SCLP_IOCTL_LETTER, 1, unsigned char)
+/* set number of colums for output */
+#define TIOCSCLPSCOLS	_IOW(SCLP_IOCTL_LETTER, 2, unsigned short)
+/* enable/disable writing without final new line character */
+#define TIOCSCLPSNL	_IOW(SCLP_IOCTL_LETTER, 4, signed char)
+/* set the maximum buffers size for output, rounded up to next 4kB boundary */
+#define TIOCSCLPSOBUF	_IOW(SCLP_IOCTL_LETTER, 5, unsigned short)
+/* set initial (default) sclp ioctls */
+#define TIOCSCLPSINIT	_IO(SCLP_IOCTL_LETTER, 6)
+/* enable/disable conversion from upper to lower case of input */
+#define TIOCSCLPSCASE	_IOW(SCLP_IOCTL_LETTER, 7, unsigned char)
+/* set special character used for separating upper and lower case, */
+/* 0x00 disables this feature */
+#define TIOCSCLPSDELIM	_IOW(SCLP_IOCTL_LETTER, 9, unsigned char)
+
+/* get width of horizontal tabulator */
+#define TIOCSCLPGHTAB	_IOR(SCLP_IOCTL_LETTER, 10, unsigned short)
+/* Is echo of input enabled ? (independent from line discipline) */
+#define TIOCSCLPGECHO	_IOR(SCLP_IOCTL_LETTER, 11, unsigned char)
+/* get number of colums for output */
+#define TIOCSCLPGCOLS	_IOR(SCLP_IOCTL_LETTER, 12, unsigned short)
+/* Is writing without final new line character enabled ? */
+#define TIOCSCLPGNL	_IOR(SCLP_IOCTL_LETTER, 14, signed char)
+/* get the maximum buffers size for output */
+#define TIOCSCLPGOBUF	_IOR(SCLP_IOCTL_LETTER, 15, unsigned short)
+/* Is conversion from upper to lower case of input enabled ? */
+#define TIOCSCLPGCASE	_IOR(SCLP_IOCTL_LETTER, 17, unsigned char)
+/* get special character used for separating upper and lower case, */
+/* 0x00 disables this feature */
+#define TIOCSCLPGDELIM	_IOR(SCLP_IOCTL_LETTER, 19, unsigned char)
+/* get the number of buffers/pages got from kernel at startup */
+#define TIOCSCLPGKBUF	_IOR(SCLP_IOCTL_LETTER, 20, unsigned short)
+
+extern struct tty_driver *sclp_tty_driver;
+
+#endif	/* __SCLP_TTY_H__ */
diff --git a/drivers/s390/char/sclp_vt220.c b/drivers/s390/char/sclp_vt220.c
new file mode 100644
index 0000000..06bd858
--- /dev/null
+++ b/drivers/s390/char/sclp_vt220.c
@@ -0,0 +1,785 @@
+/*
+ *  drivers/s390/char/sclp_vt220.c
+ *    SCLP VT220 terminal driver.
+ *
+ *  S390 version
+ *    Copyright (C) 2003 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *    Author(s): Peter Oberparleiter <Peter.Oberparleiter@de.ibm.com>
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/list.h>
+#include <linux/wait.h>
+#include <linux/timer.h>
+#include <linux/kernel.h>
+#include <linux/tty.h>
+#include <linux/tty_driver.h>
+#include <linux/sched.h>
+#include <linux/errno.h>
+#include <linux/mm.h>
+#include <linux/major.h>
+#include <linux/console.h>
+#include <linux/kdev_t.h>
+#include <linux/bootmem.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <asm/uaccess.h>
+#include "sclp.h"
+
+#define SCLP_VT220_PRINT_HEADER 	"sclp vt220 tty driver: "
+#define SCLP_VT220_MAJOR		TTY_MAJOR
+#define SCLP_VT220_MINOR		65
+#define SCLP_VT220_DRIVER_NAME		"sclp_vt220"
+#define SCLP_VT220_DEVICE_NAME		"ttysclp"
+#define SCLP_VT220_CONSOLE_NAME		"ttyS"
+#define SCLP_VT220_CONSOLE_INDEX	1	/* console=ttyS1 */
+#define SCLP_VT220_BUF_SIZE		80
+
+/* Representation of a single write request */
+struct sclp_vt220_request {
+	struct list_head list;
+	struct sclp_req sclp_req;
+	int retry_count;
+};
+
+/* VT220 SCCB */
+struct sclp_vt220_sccb {
+	struct sccb_header header;
+	struct evbuf_header evbuf;
+};
+
+#define SCLP_VT220_MAX_CHARS_PER_BUFFER	(PAGE_SIZE - \
+					 sizeof(struct sclp_vt220_request) - \
+					 sizeof(struct sclp_vt220_sccb))
+
+/* Structures and data needed to register tty driver */
+static struct tty_driver *sclp_vt220_driver;
+
+/* The tty_struct that the kernel associated with us */
+static struct tty_struct *sclp_vt220_tty;
+
+/* Lock to protect internal data from concurrent access */
+static spinlock_t sclp_vt220_lock;
+
+/* List of empty pages to be used as write request buffers */
+static struct list_head sclp_vt220_empty;
+
+/* List of pending requests */
+static struct list_head sclp_vt220_outqueue;
+
+/* Number of requests in outqueue */
+static int sclp_vt220_outqueue_count;
+
+/* Wait queue used to delay write requests while we've run out of buffers */
+static wait_queue_head_t sclp_vt220_waitq;
+
+/* Timer used for delaying write requests to merge subsequent messages into
+ * a single buffer */
+static struct timer_list sclp_vt220_timer;
+
+/* Pointer to current request buffer which has been partially filled but not
+ * yet sent */
+static struct sclp_vt220_request *sclp_vt220_current_request;
+
+/* Number of characters in current request buffer */
+static int sclp_vt220_buffered_chars;
+
+/* Flag indicating whether this driver has already been initialized */
+static int sclp_vt220_initialized = 0;
+
+/* Flag indicating that sclp_vt220_current_request should really
+ * have been already queued but wasn't because the SCLP was processing
+ * another buffer */
+static int sclp_vt220_flush_later;
+
+static void sclp_vt220_receiver_fn(struct evbuf_header *evbuf);
+static int __sclp_vt220_emit(struct sclp_vt220_request *request);
+static void sclp_vt220_emit_current(void);
+
+/* Registration structure for our interest in SCLP event buffers */
+static struct sclp_register sclp_vt220_register = {
+	.send_mask		= EvTyp_VT220Msg_Mask,
+	.receive_mask		= EvTyp_VT220Msg_Mask,
+	.state_change_fn	= NULL,
+	.receiver_fn		= sclp_vt220_receiver_fn
+};
+
+
+/*
+ * Put provided request buffer back into queue and check emit pending
+ * buffers if necessary.
+ */
+static void
+sclp_vt220_process_queue(struct sclp_vt220_request *request)
+{
+	unsigned long flags;
+	void *page;
+
+	do {
+		/* Put buffer back to list of empty buffers */
+		page = request->sclp_req.sccb;
+		spin_lock_irqsave(&sclp_vt220_lock, flags);
+		/* Move request from outqueue to empty queue */
+		list_del(&request->list);
+		sclp_vt220_outqueue_count--;
+		list_add_tail((struct list_head *) page, &sclp_vt220_empty);
+		/* Check if there is a pending buffer on the out queue. */
+		request = NULL;
+		if (!list_empty(&sclp_vt220_outqueue))
+			request = list_entry(sclp_vt220_outqueue.next,
+					     struct sclp_vt220_request, list);
+		spin_unlock_irqrestore(&sclp_vt220_lock, flags);
+	} while (request && __sclp_vt220_emit(request));
+	if (request == NULL && sclp_vt220_flush_later)
+		sclp_vt220_emit_current();
+	wake_up(&sclp_vt220_waitq);
+	/* Check if the tty needs a wake up call */
+	if (sclp_vt220_tty != NULL) {
+		tty_wakeup(sclp_vt220_tty);
+	}
+}
+
+#define SCLP_BUFFER_MAX_RETRY		1
+
+/*
+ * Callback through which the result of a write request is reported by the
+ * SCLP.
+ */
+static void
+sclp_vt220_callback(struct sclp_req *request, void *data)
+{
+	struct sclp_vt220_request *vt220_request;
+	struct sclp_vt220_sccb *sccb;
+
+	vt220_request = (struct sclp_vt220_request *) data;
+	if (request->status == SCLP_REQ_FAILED) {
+		sclp_vt220_process_queue(vt220_request);
+		return;
+	}
+	sccb = (struct sclp_vt220_sccb *) vt220_request->sclp_req.sccb;
+
+	/* Check SCLP response code and choose suitable action	*/
+	switch (sccb->header.response_code) {
+	case 0x0020 :
+		break;
+
+	case 0x05f0: /* Target resource in improper state */
+		break;
+
+	case 0x0340: /* Contained SCLP equipment check */
+		if (++vt220_request->retry_count > SCLP_BUFFER_MAX_RETRY)
+			break;
+		/* Remove processed buffers and requeue rest */
+		if (sclp_remove_processed((struct sccb_header *) sccb) > 0) {
+			/* Not all buffers were processed */
+			sccb->header.response_code = 0x0000;
+			vt220_request->sclp_req.status = SCLP_REQ_FILLED;
+			if (sclp_add_request(request) == 0)
+				return;
+		}
+		break;
+
+	case 0x0040: /* SCLP equipment check */
+		if (++vt220_request->retry_count > SCLP_BUFFER_MAX_RETRY)
+			break;
+		sccb->header.response_code = 0x0000;
+		vt220_request->sclp_req.status = SCLP_REQ_FILLED;
+		if (sclp_add_request(request) == 0)
+			return;
+		break;
+
+	default:
+		break;
+	}
+	sclp_vt220_process_queue(vt220_request);
+}
+
+/*
+ * Emit vt220 request buffer to SCLP. Return zero on success, non-zero
+ * otherwise.
+ */
+static int
+__sclp_vt220_emit(struct sclp_vt220_request *request)
+{
+	if (!(sclp_vt220_register.sclp_send_mask & EvTyp_VT220Msg_Mask)) {
+		request->sclp_req.status = SCLP_REQ_FAILED;
+		return -EIO;
+	}
+	request->sclp_req.command = SCLP_CMDW_WRITEDATA;
+	request->sclp_req.status = SCLP_REQ_FILLED;
+	request->sclp_req.callback = sclp_vt220_callback;
+	request->sclp_req.callback_data = (void *) request;
+
+	return sclp_add_request(&request->sclp_req);
+}
+
+/*
+ * Queue and emit given request.
+ */
+static void
+sclp_vt220_emit(struct sclp_vt220_request *request)
+{
+	unsigned long flags;
+	int count;
+
+	spin_lock_irqsave(&sclp_vt220_lock, flags);
+	list_add_tail(&request->list, &sclp_vt220_outqueue);
+	count = sclp_vt220_outqueue_count++;
+	spin_unlock_irqrestore(&sclp_vt220_lock, flags);
+	/* Emit only the first buffer immediately - callback takes care of
+	 * the rest */
+	if (count == 0 && __sclp_vt220_emit(request))
+		sclp_vt220_process_queue(request);
+}
+
+/*
+ * Queue and emit current request. Return zero on success, non-zero otherwise.
+ */
+static void
+sclp_vt220_emit_current(void)
+{
+	unsigned long flags;
+	struct sclp_vt220_request *request;
+	struct sclp_vt220_sccb *sccb;
+
+	spin_lock_irqsave(&sclp_vt220_lock, flags);
+	request = NULL;
+	if (sclp_vt220_current_request != NULL) {
+		sccb = (struct sclp_vt220_sccb *) 
+				sclp_vt220_current_request->sclp_req.sccb;
+		/* Only emit buffers with content */
+		if (sccb->header.length != sizeof(struct sclp_vt220_sccb)) {
+			request = sclp_vt220_current_request;
+			sclp_vt220_current_request = NULL;
+			if (timer_pending(&sclp_vt220_timer))
+				del_timer(&sclp_vt220_timer);
+		}
+		sclp_vt220_flush_later = 0;
+	}
+	spin_unlock_irqrestore(&sclp_vt220_lock, flags);
+	if (request != NULL)
+		sclp_vt220_emit(request);
+}
+
+#define SCLP_NORMAL_WRITE	0x00
+
+/*
+ * Helper function to initialize a page with the sclp request structure.
+ */
+static struct sclp_vt220_request *
+sclp_vt220_initialize_page(void *page)
+{
+	struct sclp_vt220_request *request;
+	struct sclp_vt220_sccb *sccb;
+
+	/* Place request structure at end of page */
+	request = ((struct sclp_vt220_request *)
+			((addr_t) page + PAGE_SIZE)) - 1;
+	request->retry_count = 0;
+	request->sclp_req.sccb = page;
+	/* SCCB goes at start of page */
+	sccb = (struct sclp_vt220_sccb *) page;
+	memset((void *) sccb, 0, sizeof(struct sclp_vt220_sccb));
+	sccb->header.length = sizeof(struct sclp_vt220_sccb);
+	sccb->header.function_code = SCLP_NORMAL_WRITE;
+	sccb->header.response_code = 0x0000;
+	sccb->evbuf.type = EvTyp_VT220Msg;
+	sccb->evbuf.length = sizeof(struct evbuf_header);
+
+	return request;
+}
+
+static inline unsigned int
+sclp_vt220_space_left(struct sclp_vt220_request *request)
+{
+	struct sclp_vt220_sccb *sccb;
+	sccb = (struct sclp_vt220_sccb *) request->sclp_req.sccb;
+	return PAGE_SIZE - sizeof(struct sclp_vt220_request) -
+	       sccb->header.length;
+}
+
+static inline unsigned int
+sclp_vt220_chars_stored(struct sclp_vt220_request *request)
+{
+	struct sclp_vt220_sccb *sccb;
+	sccb = (struct sclp_vt220_sccb *) request->sclp_req.sccb;
+	return sccb->evbuf.length - sizeof(struct evbuf_header);
+}
+
+/*
+ * Add msg to buffer associated with request. Return the number of characters
+ * added.
+ */
+static int
+sclp_vt220_add_msg(struct sclp_vt220_request *request,
+		   const unsigned char *msg, int count, int convertlf)
+{
+	struct sclp_vt220_sccb *sccb;
+	void *buffer;
+	unsigned char c;
+	int from;
+	int to;
+
+	if (count > sclp_vt220_space_left(request))
+		count = sclp_vt220_space_left(request);
+	if (count <= 0)
+		return 0;
+
+	sccb = (struct sclp_vt220_sccb *) request->sclp_req.sccb;
+	buffer = (void *) ((addr_t) sccb + sccb->header.length);
+
+	if (convertlf) {
+		/* Perform Linefeed conversion (0x0a -> 0x0a 0x0d)*/
+		for (from=0, to=0;
+		     (from < count) && (to < sclp_vt220_space_left(request));
+		     from++) {
+			/* Retrieve character */
+			c = msg[from];
+			/* Perform conversion */
+			if (c == 0x0a) {
+				if (to + 1 < sclp_vt220_space_left(request)) {
+					((unsigned char *) buffer)[to++] = c;
+					((unsigned char *) buffer)[to++] = 0x0d;
+				} else
+					break;
+
+			} else
+				((unsigned char *) buffer)[to++] = c;
+		}
+		sccb->header.length += to;
+		sccb->evbuf.length += to;
+		return from;
+	} else {
+		memcpy(buffer, (const void *) msg, count);
+		sccb->header.length += count;
+		sccb->evbuf.length += count;
+		return count;
+	}
+}
+
+/*
+ * Emit buffer after having waited long enough for more data to arrive.
+ */
+static void
+sclp_vt220_timeout(unsigned long data)
+{
+	sclp_vt220_emit_current();
+}
+
+#define BUFFER_MAX_DELAY	HZ/2
+
+/* 
+ * Internal implementation of the write function. Write COUNT bytes of data
+ * from memory at BUF
+ * to the SCLP interface. In case that the data does not fit into the current
+ * write buffer, emit the current one and allocate a new one. If there are no
+ * more empty buffers available, wait until one gets emptied. If DO_SCHEDULE
+ * is non-zero, the buffer will be scheduled for emitting after a timeout -
+ * otherwise the user has to explicitly call the flush function.
+ * A non-zero CONVERTLF parameter indicates that 0x0a characters in the message
+ * buffer should be converted to 0x0a 0x0d. After completion, return the number
+ * of bytes written.
+ */
+static int
+__sclp_vt220_write(const unsigned char *buf, int count, int do_schedule,
+		   int convertlf)
+{
+	unsigned long flags;
+	void *page;
+	int written;
+	int overall_written;
+
+	if (count <= 0)
+		return 0;
+	overall_written = 0;
+	spin_lock_irqsave(&sclp_vt220_lock, flags);
+	do {
+		/* Create a sclp output buffer if none exists yet */
+		if (sclp_vt220_current_request == NULL) {
+			while (list_empty(&sclp_vt220_empty)) {
+				spin_unlock_irqrestore(&sclp_vt220_lock,
+						       flags);
+				if (in_interrupt())
+					sclp_sync_wait();
+				else
+					wait_event(sclp_vt220_waitq,
+						!list_empty(&sclp_vt220_empty));
+				spin_lock_irqsave(&sclp_vt220_lock, flags);
+			}
+			page = (void *) sclp_vt220_empty.next;
+			list_del((struct list_head *) page);
+			sclp_vt220_current_request =
+				sclp_vt220_initialize_page(page);
+		}
+		/* Try to write the string to the current request buffer */
+		written = sclp_vt220_add_msg(sclp_vt220_current_request,
+					     buf, count, convertlf);
+		overall_written += written;
+		if (written == count)
+			break;
+		/*
+		 * Not all characters could be written to the current
+		 * output buffer. Emit the buffer, create a new buffer
+		 * and then output the rest of the string.
+		 */
+		spin_unlock_irqrestore(&sclp_vt220_lock, flags);
+		sclp_vt220_emit_current();
+		spin_lock_irqsave(&sclp_vt220_lock, flags);
+		buf += written;
+		count -= written;
+	} while (count > 0);
+	/* Setup timer to output current console buffer after some time */
+	if (sclp_vt220_current_request != NULL &&
+	    !timer_pending(&sclp_vt220_timer) && do_schedule) {
+		sclp_vt220_timer.function = sclp_vt220_timeout;
+		sclp_vt220_timer.data = 0UL;
+		sclp_vt220_timer.expires = jiffies + BUFFER_MAX_DELAY;
+		add_timer(&sclp_vt220_timer);
+	}
+	spin_unlock_irqrestore(&sclp_vt220_lock, flags);
+	return overall_written;
+}
+
+/*
+ * This routine is called by the kernel to write a series of
+ * characters to the tty device.  The characters may come from
+ * user space or kernel space.  This routine will return the
+ * number of characters actually accepted for writing.
+ */
+static int
+sclp_vt220_write(struct tty_struct *tty, const unsigned char *buf, int count)
+{
+	return __sclp_vt220_write(buf, count, 1, 0);
+}
+
+#define SCLP_VT220_SESSION_ENDED	0x01
+#define	SCLP_VT220_SESSION_STARTED	0x80
+#define SCLP_VT220_SESSION_DATA		0x00
+
+/*
+ * Called by the SCLP to report incoming event buffers.
+ */
+static void
+sclp_vt220_receiver_fn(struct evbuf_header *evbuf)
+{
+	char *buffer;
+	unsigned int count;
+
+	/* Ignore input if device is not open */
+	if (sclp_vt220_tty == NULL)
+		return;
+
+	buffer = (char *) ((addr_t) evbuf + sizeof(struct evbuf_header));
+	count = evbuf->length - sizeof(struct evbuf_header);
+
+	switch (*buffer) {
+	case SCLP_VT220_SESSION_ENDED:
+	case SCLP_VT220_SESSION_STARTED:
+		break;
+	case SCLP_VT220_SESSION_DATA:
+		/* Send input to line discipline */
+		buffer++;
+		count--;
+		/* Prevent buffer overrun by discarding input. Note that
+		 * because buffer_push works asynchronously, we cannot wait
+		 * for the buffer to be emptied. */
+		if (count + sclp_vt220_tty->flip.count > TTY_FLIPBUF_SIZE)
+			count = TTY_FLIPBUF_SIZE - sclp_vt220_tty->flip.count;
+		memcpy(sclp_vt220_tty->flip.char_buf_ptr, buffer, count);
+		memset(sclp_vt220_tty->flip.flag_buf_ptr, TTY_NORMAL, count);
+		sclp_vt220_tty->flip.char_buf_ptr += count;
+		sclp_vt220_tty->flip.flag_buf_ptr += count;
+		sclp_vt220_tty->flip.count += count;
+		tty_flip_buffer_push(sclp_vt220_tty);
+		break;
+	}
+}
+
+/*
+ * This routine is called when a particular tty device is opened.
+ */
+static int
+sclp_vt220_open(struct tty_struct *tty, struct file *filp)
+{
+	if (tty->count == 1) {
+		sclp_vt220_tty = tty;
+		tty->driver_data = kmalloc(SCLP_VT220_BUF_SIZE, GFP_KERNEL);
+		if (tty->driver_data == NULL)
+			return -ENOMEM;
+		tty->low_latency = 0;
+	}
+	return 0;
+}
+
+/*
+ * This routine is called when a particular tty device is closed.
+ */
+static void
+sclp_vt220_close(struct tty_struct *tty, struct file *filp)
+{
+	if (tty->count == 1) {
+		sclp_vt220_tty = NULL;
+		kfree(tty->driver_data);
+		tty->driver_data = NULL;
+	}
+}
+
+/*
+ * This routine is called by the kernel to write a single
+ * character to the tty device.  If the kernel uses this routine,
+ * it must call the flush_chars() routine (if defined) when it is
+ * done stuffing characters into the driver.
+ *
+ * NOTE: include/linux/tty_driver.h specifies that a character should be
+ * ignored if there is no room in the queue. This driver implements a different
+ * semantic in that it will block when there is no more room left.
+ */
+static void
+sclp_vt220_put_char(struct tty_struct *tty, unsigned char ch)
+{
+	__sclp_vt220_write(&ch, 1, 0, 0);
+}
+
+/*
+ * This routine is called by the kernel after it has written a
+ * series of characters to the tty device using put_char().  
+ */
+static void
+sclp_vt220_flush_chars(struct tty_struct *tty)
+{
+	if (sclp_vt220_outqueue_count == 0)
+		sclp_vt220_emit_current();
+	else
+		sclp_vt220_flush_later = 1;
+}
+
+/*
+ * This routine returns the numbers of characters the tty driver
+ * will accept for queuing to be written.  This number is subject
+ * to change as output buffers get emptied, or if the output flow
+ * control is acted.
+ */
+static int
+sclp_vt220_write_room(struct tty_struct *tty)
+{
+	unsigned long flags;
+	struct list_head *l;
+	int count;
+
+	spin_lock_irqsave(&sclp_vt220_lock, flags);
+	count = 0;
+	if (sclp_vt220_current_request != NULL)
+		count = sclp_vt220_space_left(sclp_vt220_current_request);
+	list_for_each(l, &sclp_vt220_empty)
+		count += SCLP_VT220_MAX_CHARS_PER_BUFFER;
+	spin_unlock_irqrestore(&sclp_vt220_lock, flags);
+	return count;
+}
+
+/*
+ * Return number of buffered chars.
+ */
+static int
+sclp_vt220_chars_in_buffer(struct tty_struct *tty)
+{
+	unsigned long flags;
+	struct list_head *l;
+	struct sclp_vt220_request *r;
+	int count;
+
+	spin_lock_irqsave(&sclp_vt220_lock, flags);
+	count = 0;
+	if (sclp_vt220_current_request != NULL)
+		count = sclp_vt220_chars_stored(sclp_vt220_current_request);
+	list_for_each(l, &sclp_vt220_outqueue) {
+		r = list_entry(l, struct sclp_vt220_request, list);
+		count += sclp_vt220_chars_stored(r);
+	}
+	spin_unlock_irqrestore(&sclp_vt220_lock, flags);
+	return count;
+}
+
+static void
+__sclp_vt220_flush_buffer(void)
+{
+	unsigned long flags;
+
+	sclp_vt220_emit_current();
+	spin_lock_irqsave(&sclp_vt220_lock, flags);
+	if (timer_pending(&sclp_vt220_timer))
+		del_timer(&sclp_vt220_timer);
+	while (sclp_vt220_outqueue_count > 0) {
+		spin_unlock_irqrestore(&sclp_vt220_lock, flags);
+		sclp_sync_wait();
+		spin_lock_irqsave(&sclp_vt220_lock, flags);
+	}
+	spin_unlock_irqrestore(&sclp_vt220_lock, flags);
+}
+
+/*
+ * Pass on all buffers to the hardware. Return only when there are no more
+ * buffers pending.
+ */
+static void
+sclp_vt220_flush_buffer(struct tty_struct *tty)
+{
+	sclp_vt220_emit_current();
+}
+
+/*
+ * Initialize all relevant components and register driver with system.
+ */
+static int
+__sclp_vt220_init(int early)
+{
+	void *page;
+	int i;
+
+	if (sclp_vt220_initialized)
+		return 0;
+	sclp_vt220_initialized = 1;
+	spin_lock_init(&sclp_vt220_lock);
+	INIT_LIST_HEAD(&sclp_vt220_empty);
+	INIT_LIST_HEAD(&sclp_vt220_outqueue);
+	init_waitqueue_head(&sclp_vt220_waitq);
+	init_timer(&sclp_vt220_timer);
+	sclp_vt220_current_request = NULL;
+	sclp_vt220_buffered_chars = 0;
+	sclp_vt220_outqueue_count = 0;
+	sclp_vt220_tty = NULL;
+	sclp_vt220_flush_later = 0;
+
+	/* Allocate pages for output buffering */
+	for (i = 0; i < (early ? MAX_CONSOLE_PAGES : MAX_KMEM_PAGES); i++) {
+		if (early)
+			page = alloc_bootmem_low_pages(PAGE_SIZE);
+		else
+			page = (void *) get_zeroed_page(GFP_KERNEL | GFP_DMA);
+		if (!page)
+			return -ENOMEM;
+		list_add_tail((struct list_head *) page, &sclp_vt220_empty);
+	}
+	return 0;
+}
+
+static struct tty_operations sclp_vt220_ops = {
+	.open = sclp_vt220_open,
+	.close = sclp_vt220_close,
+	.write = sclp_vt220_write,
+	.put_char = sclp_vt220_put_char,
+	.flush_chars = sclp_vt220_flush_chars,
+	.write_room = sclp_vt220_write_room,
+	.chars_in_buffer = sclp_vt220_chars_in_buffer,
+	.flush_buffer = sclp_vt220_flush_buffer
+};
+
+/*
+ * Register driver with SCLP and Linux and initialize internal tty structures.
+ */
+int __init
+sclp_vt220_tty_init(void)
+{
+	struct tty_driver *driver;
+	int rc;
+
+	/* Note: we're not testing for CONSOLE_IS_SCLP here to preserve
+	 * symmetry between VM and LPAR systems regarding ttyS1. */
+	driver = alloc_tty_driver(1);
+	if (!driver)
+		return -ENOMEM;
+	rc = __sclp_vt220_init(0);
+	if (rc) {
+		put_tty_driver(driver);
+		return rc;
+	}
+	rc = sclp_register(&sclp_vt220_register);
+	if (rc) {
+		printk(KERN_ERR SCLP_VT220_PRINT_HEADER
+		       "could not register tty - "
+		       "sclp_register returned %d\n", rc);
+		put_tty_driver(driver);
+		return rc;
+	}
+
+	driver->owner = THIS_MODULE;
+	driver->driver_name = SCLP_VT220_DRIVER_NAME;
+	driver->name = SCLP_VT220_DEVICE_NAME;
+	driver->major = SCLP_VT220_MAJOR;
+	driver->minor_start = SCLP_VT220_MINOR;
+	driver->type = TTY_DRIVER_TYPE_SYSTEM;
+	driver->subtype = SYSTEM_TYPE_TTY;
+	driver->init_termios = tty_std_termios;
+	driver->flags = TTY_DRIVER_REAL_RAW;
+	tty_set_operations(driver, &sclp_vt220_ops);
+
+	rc = tty_register_driver(driver);
+	if (rc) {
+		printk(KERN_ERR SCLP_VT220_PRINT_HEADER
+		       "could not register tty - "
+		       "tty_register_driver returned %d\n", rc);
+		put_tty_driver(driver);
+		return rc;
+	}
+	sclp_vt220_driver = driver;
+	return 0;
+}
+
+module_init(sclp_vt220_tty_init);
+
+#ifdef CONFIG_SCLP_VT220_CONSOLE
+
+static void
+sclp_vt220_con_write(struct console *con, const char *buf, unsigned int count)
+{
+	__sclp_vt220_write((const unsigned char *) buf, count, 1, 1);
+}
+
+static struct tty_driver *
+sclp_vt220_con_device(struct console *c, int *index)
+{
+	*index = 0;
+	return sclp_vt220_driver;
+}
+
+/*
+ * This routine is called from panic when the kernel is going to give up.
+ * We have to make sure that all buffers will be flushed to the SCLP.
+ * Note that this function may be called from within an interrupt context.
+ */
+static void
+sclp_vt220_con_unblank(void)
+{
+	__sclp_vt220_flush_buffer();
+}
+
+/* Structure needed to register with printk */
+static struct console sclp_vt220_console =
+{
+	.name = SCLP_VT220_CONSOLE_NAME,
+	.write = sclp_vt220_con_write,
+	.device = sclp_vt220_con_device,
+	.unblank = sclp_vt220_con_unblank,
+	.flags = CON_PRINTBUFFER,
+	.index = SCLP_VT220_CONSOLE_INDEX
+};
+
+static int __init
+sclp_vt220_con_init(void)
+{
+	int rc;
+
+	if (!CONSOLE_IS_SCLP)
+		return 0;
+	rc = __sclp_vt220_init(1);
+	if (rc)
+		return rc;
+	/* Attach linux console */
+	register_console(&sclp_vt220_console);
+	return 0;
+}
+
+console_initcall(sclp_vt220_con_init);
+#endif /* CONFIG_SCLP_VT220_CONSOLE */
+
diff --git a/drivers/s390/char/tape.h b/drivers/s390/char/tape.h
new file mode 100644
index 0000000..d04e6c2
--- /dev/null
+++ b/drivers/s390/char/tape.h
@@ -0,0 +1,384 @@
+/*
+ *  drivers/s390/char/tape.h
+ *    tape device driver for 3480/3490E/3590 tapes.
+ *
+ *  S390 and zSeries version
+ *    Copyright (C) 2001,2002 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *    Author(s): Carsten Otte <cotte@de.ibm.com>
+ *		 Tuan Ngo-Anh <ngoanh@de.ibm.com>
+ *		 Martin Schwidefsky <schwidefsky@de.ibm.com>
+ */
+
+#ifndef _TAPE_H
+#define _TAPE_H
+
+#include <asm/ccwdev.h>
+#include <asm/debug.h>
+#include <asm/idals.h>
+#include <linux/config.h>
+#include <linux/blkdev.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mtio.h>
+#include <linux/interrupt.h>
+#include <linux/workqueue.h>
+
+struct gendisk;
+
+/*
+ * Define DBF_LIKE_HELL for lots of messages in the debug feature.
+ */
+#define DBF_LIKE_HELL
+#ifdef  DBF_LIKE_HELL
+#define DBF_LH(level, str, ...) \
+do { \
+	debug_sprintf_event(TAPE_DBF_AREA, level, str, ## __VA_ARGS__); \
+} while (0)
+#else
+#define DBF_LH(level, str, ...) do {} while(0)
+#endif
+
+/*
+ * macros s390 debug feature (dbf)
+ */
+#define DBF_EVENT(d_level, d_str...) \
+do { \
+	debug_sprintf_event(TAPE_DBF_AREA, d_level, d_str); \
+} while (0)
+
+#define DBF_EXCEPTION(d_level, d_str...) \
+do { \
+	debug_sprintf_exception(TAPE_DBF_AREA, d_level, d_str); \
+} while (0)
+
+#define TAPE_VERSION_MAJOR 2
+#define TAPE_VERSION_MINOR 0
+#define TAPE_MAGIC "tape"
+
+#define TAPE_MINORS_PER_DEV 2	    /* two minors per device */
+#define TAPEBLOCK_HSEC_SIZE	2048
+#define TAPEBLOCK_HSEC_S2B	2
+#define TAPEBLOCK_RETRIES	5
+
+enum tape_medium_state {
+	MS_UNKNOWN,
+	MS_LOADED,
+	MS_UNLOADED,
+	MS_SIZE
+};
+
+enum tape_state {
+	TS_UNUSED=0,
+	TS_IN_USE,
+	TS_BLKUSE,
+	TS_INIT,
+	TS_NOT_OPER,
+	TS_SIZE
+};
+
+enum tape_op {
+	TO_BLOCK,	/* Block read */
+	TO_BSB,		/* Backward space block */
+	TO_BSF,		/* Backward space filemark */
+	TO_DSE,		/* Data security erase */
+	TO_FSB,		/* Forward space block */
+	TO_FSF,		/* Forward space filemark */
+	TO_LBL,		/* Locate block label */
+	TO_NOP,		/* No operation */
+	TO_RBA,		/* Read backward */
+	TO_RBI,		/* Read block information */
+	TO_RFO,		/* Read forward */
+	TO_REW,		/* Rewind tape */
+	TO_RUN,		/* Rewind and unload tape */
+	TO_WRI,		/* Write block */
+	TO_WTM,		/* Write tape mark */
+	TO_MSEN,	/* Medium sense */
+	TO_LOAD,	/* Load tape */
+	TO_READ_CONFIG, /* Read configuration data */
+	TO_READ_ATTMSG, /* Read attention message */
+	TO_DIS,		/* Tape display */
+	TO_ASSIGN,	/* Assign tape to channel path */
+	TO_UNASSIGN,	/* Unassign tape from channel path */
+	TO_SIZE		/* #entries in tape_op_t */
+};
+
+/* Forward declaration */
+struct tape_device;
+
+/* tape_request->status can be: */
+enum tape_request_status {
+	TAPE_REQUEST_INIT,	/* request is ready to be processed */
+	TAPE_REQUEST_QUEUED,	/* request is queued to be processed */
+	TAPE_REQUEST_IN_IO,	/* request is currently in IO */
+	TAPE_REQUEST_DONE,	/* request is completed. */
+};
+
+/* Tape CCW request */
+struct tape_request {
+	struct list_head list;		/* list head for request queueing. */
+	struct tape_device *device;	/* tape device of this request */
+	struct ccw1 *cpaddr;		/* address of the channel program. */
+	void *cpdata;			/* pointer to ccw data. */
+	enum tape_request_status status;/* status of this request */
+	int options;			/* options for execution. */
+	int retries;			/* retry counter for error recovery. */
+	int rescnt;			/* residual count from devstat. */
+
+	/* Callback for delivering final status. */
+	void (*callback)(struct tape_request *, void *);
+	void *callback_data;
+
+	enum tape_op op;
+	int rc;
+};
+
+/* Function type for magnetic tape commands */
+typedef int (*tape_mtop_fn)(struct tape_device *, int);
+
+/* Size of the array containing the mtops for a discipline */
+#define TAPE_NR_MTOPS (MTMKPART+1)
+
+/* Tape Discipline */
+struct tape_discipline {
+	struct module *owner;
+	int  (*setup_device)(struct tape_device *);
+	void (*cleanup_device)(struct tape_device *);
+	int (*irq)(struct tape_device *, struct tape_request *, struct irb *);
+	struct tape_request *(*read_block)(struct tape_device *, size_t);
+	struct tape_request *(*write_block)(struct tape_device *, size_t);
+	void (*process_eov)(struct tape_device*);
+#ifdef CONFIG_S390_TAPE_BLOCK
+	/* Block device stuff. */
+	struct tape_request *(*bread)(struct tape_device *, struct request *);
+	void (*check_locate)(struct tape_device *, struct tape_request *);
+	void (*free_bread)(struct tape_request *);
+#endif
+	/* ioctl function for additional ioctls. */
+	int (*ioctl_fn)(struct tape_device *, unsigned int, unsigned long);
+	/* Array of tape commands with TAPE_NR_MTOPS entries */
+	tape_mtop_fn *mtop_array;
+};
+
+/*
+ * The discipline irq function either returns an error code (<0) which
+ * means that the request has failed with an error or one of the following:
+ */
+#define TAPE_IO_SUCCESS 0	/* request successful */
+#define TAPE_IO_PENDING 1	/* request still running */
+#define TAPE_IO_RETRY	2	/* retry to current request */
+#define TAPE_IO_STOP	3	/* stop the running request */
+
+/* Char Frontend Data */
+struct tape_char_data {
+	struct idal_buffer *idal_buf;	/* idal buffer for user char data */
+	int block_size;			/*   of size block_size. */
+};
+
+#ifdef CONFIG_S390_TAPE_BLOCK
+/* Block Frontend Data */
+struct tape_blk_data
+{
+	/* Block device request queue. */
+	request_queue_t *	request_queue;
+	spinlock_t		request_queue_lock;
+
+	/* Task to move entries from block request to CCS request queue. */
+	struct work_struct	requeue_task;
+	atomic_t		requeue_scheduled;
+
+	/* Current position on the tape. */
+	long			block_position;
+	int			medium_changed;
+	struct gendisk *	disk;
+};
+#endif
+
+/* Tape Info */
+struct tape_device {
+	/* entry in tape_device_list */
+	struct list_head		node;
+
+	int				cdev_id;
+	struct ccw_device *		cdev;
+	struct tape_class_device *	nt;
+	struct tape_class_device *	rt;
+
+	/* Device discipline information. */
+	struct tape_discipline *	discipline;
+	void *				discdata;
+
+	/* Generic status flags */
+	long				tape_generic_status;
+
+	/* Device state information. */
+	wait_queue_head_t		state_change_wq;
+	enum tape_state			tape_state;
+	enum tape_medium_state		medium_state;
+	unsigned char *			modeset_byte;
+
+	/* Reference count. */
+	atomic_t			ref_count;
+
+	/* Request queue. */
+	struct list_head		req_queue;
+
+	/* Each tape device has (currently) two minor numbers. */
+	int				first_minor;
+
+	/* Number of tapemarks required for correct termination. */
+	int				required_tapemarks;
+
+	/* Block ID of the BOF */
+	unsigned int			bof;
+
+	/* Character device frontend data */
+	struct tape_char_data		char_data;
+#ifdef CONFIG_S390_TAPE_BLOCK
+	/* Block dev frontend data */
+	struct tape_blk_data		blk_data;
+#endif
+};
+
+/* Externals from tape_core.c */
+extern struct tape_request *tape_alloc_request(int cplength, int datasize);
+extern void tape_free_request(struct tape_request *);
+extern int tape_do_io(struct tape_device *, struct tape_request *);
+extern int tape_do_io_async(struct tape_device *, struct tape_request *);
+extern int tape_do_io_interruptible(struct tape_device *, struct tape_request *);
+void tape_hotplug_event(struct tape_device *, int major, int action);
+
+static inline int
+tape_do_io_free(struct tape_device *device, struct tape_request *request)
+{
+	int rc;
+
+	rc = tape_do_io(device, request);
+	tape_free_request(request);
+	return rc;
+}
+
+extern int tape_oper_handler(int irq, int status);
+extern void tape_noper_handler(int irq, int status);
+extern int tape_open(struct tape_device *);
+extern int tape_release(struct tape_device *);
+extern int tape_mtop(struct tape_device *, int, int);
+extern void tape_state_set(struct tape_device *, enum tape_state);
+
+extern int tape_generic_online(struct tape_device *, struct tape_discipline *);
+extern int tape_generic_offline(struct tape_device *device);
+
+/* Externals from tape_devmap.c */
+extern int tape_generic_probe(struct ccw_device *);
+extern void tape_generic_remove(struct ccw_device *);
+
+extern struct tape_device *tape_get_device(int devindex);
+extern struct tape_device *tape_get_device_reference(struct tape_device *);
+extern struct tape_device *tape_put_device(struct tape_device *);
+
+/* Externals from tape_char.c */
+extern int tapechar_init(void);
+extern void tapechar_exit(void);
+extern int  tapechar_setup_device(struct tape_device *);
+extern void tapechar_cleanup_device(struct tape_device *);
+
+/* Externals from tape_block.c */
+#ifdef CONFIG_S390_TAPE_BLOCK
+extern int tapeblock_init (void);
+extern void tapeblock_exit(void);
+extern int tapeblock_setup_device(struct tape_device *);
+extern void tapeblock_cleanup_device(struct tape_device *);
+#else
+static inline int tapeblock_init (void) {return 0;}
+static inline void tapeblock_exit (void) {;}
+static inline int tapeblock_setup_device(struct tape_device *t) {return 0;}
+static inline void tapeblock_cleanup_device (struct tape_device *t) {;}
+#endif
+
+/* tape initialisation functions */
+#ifdef CONFIG_PROC_FS
+extern void tape_proc_init (void);
+extern void tape_proc_cleanup (void);
+#else
+static inline void tape_proc_init (void) {;}
+static inline void tape_proc_cleanup (void) {;}
+#endif
+
+/* a function for dumping device sense info */
+extern void tape_dump_sense(struct tape_device *, struct tape_request *,
+			    struct irb *);
+extern void tape_dump_sense_dbf(struct tape_device *, struct tape_request *,
+				struct irb *);
+
+/* functions for handling the status of a device */
+extern void tape_med_state_set(struct tape_device *, enum tape_medium_state);
+
+/* The debug area */
+extern debug_info_t *TAPE_DBF_AREA;
+
+/* functions for building ccws */
+static inline struct ccw1 *
+tape_ccw_cc(struct ccw1 *ccw, __u8 cmd_code, __u16 memsize, void *cda)
+{
+	ccw->cmd_code = cmd_code;
+	ccw->flags = CCW_FLAG_CC;
+	ccw->count = memsize;
+	ccw->cda = (__u32)(addr_t) cda;
+	return ccw + 1;
+}
+
+static inline struct ccw1 *
+tape_ccw_end(struct ccw1 *ccw, __u8 cmd_code, __u16 memsize, void *cda)
+{
+	ccw->cmd_code = cmd_code;
+	ccw->flags = 0;
+	ccw->count = memsize;
+	ccw->cda = (__u32)(addr_t) cda;
+	return ccw + 1;
+}
+
+static inline struct ccw1 *
+tape_ccw_cmd(struct ccw1 *ccw, __u8 cmd_code)
+{
+	ccw->cmd_code = cmd_code;
+	ccw->flags = 0;
+	ccw->count = 0;
+	ccw->cda = (__u32)(addr_t) &ccw->cmd_code;
+	return ccw + 1;
+}
+
+static inline struct ccw1 *
+tape_ccw_repeat(struct ccw1 *ccw, __u8 cmd_code, int count)
+{
+	while (count-- > 0) {
+		ccw->cmd_code = cmd_code;
+		ccw->flags = CCW_FLAG_CC;
+		ccw->count = 0;
+		ccw->cda = (__u32)(addr_t) &ccw->cmd_code;
+		ccw++;
+	}
+	return ccw;
+}
+
+static inline struct ccw1 *
+tape_ccw_cc_idal(struct ccw1 *ccw, __u8 cmd_code, struct idal_buffer *idal)
+{
+	ccw->cmd_code = cmd_code;
+	ccw->flags    = CCW_FLAG_CC;
+	idal_buffer_set_cda(idal, ccw);
+	return ccw++;
+}
+
+static inline struct ccw1 *
+tape_ccw_end_idal(struct ccw1 *ccw, __u8 cmd_code, struct idal_buffer *idal)
+{
+	ccw->cmd_code = cmd_code;
+	ccw->flags    = 0;
+	idal_buffer_set_cda(idal, ccw);
+	return ccw++;
+}
+
+/* Global vars */
+extern const char *tape_state_verbose[];
+extern const char *tape_op_verbose[];
+
+#endif /* for ifdef tape.h */
diff --git a/drivers/s390/char/tape_34xx.c b/drivers/s390/char/tape_34xx.c
new file mode 100644
index 0000000..480ec87
--- /dev/null
+++ b/drivers/s390/char/tape_34xx.c
@@ -0,0 +1,1385 @@
+/*
+ *  drivers/s390/char/tape_34xx.c
+ *    tape device discipline for 3480/3490 tapes.
+ *
+ *  S390 and zSeries version
+ *    Copyright (C) 2001,2002 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *    Author(s): Carsten Otte <cotte@de.ibm.com>
+ *		 Tuan Ngo-Anh <ngoanh@de.ibm.com>
+ *		 Martin Schwidefsky <schwidefsky@de.ibm.com>
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/bio.h>
+#include <linux/workqueue.h>
+
+#define TAPE_DBF_AREA	tape_34xx_dbf
+
+#include "tape.h"
+#include "tape_std.h"
+
+#define PRINTK_HEADER "TAPE_34XX: "
+
+/*
+ * Pointer to debug area.
+ */
+debug_info_t *TAPE_DBF_AREA = NULL;
+EXPORT_SYMBOL(TAPE_DBF_AREA);
+
+enum tape_34xx_type {
+	tape_3480,
+	tape_3490,
+};
+
+#define TAPE34XX_FMT_3480	0
+#define TAPE34XX_FMT_3480_2_XF	1
+#define TAPE34XX_FMT_3480_XF	2
+
+struct tape_34xx_block_id {
+	unsigned int	wrap		: 1;
+	unsigned int	segment		: 7;
+	unsigned int	format		: 2;
+	unsigned int	block		: 22;
+};
+
+/*
+ * A list of block ID's is used to faster seek blocks.
+ */
+struct tape_34xx_sbid {
+	struct list_head		list;
+	struct tape_34xx_block_id	bid;
+};
+
+static void tape_34xx_delete_sbid_from(struct tape_device *, int);
+
+/*
+ * Medium sense for 34xx tapes. There is no 'real' medium sense call.
+ * So we just do a normal sense.
+ */
+static int
+tape_34xx_medium_sense(struct tape_device *device)
+{
+	struct tape_request *request;
+	unsigned char       *sense;
+	int                  rc;
+
+	request = tape_alloc_request(1, 32);
+	if (IS_ERR(request)) {
+		DBF_EXCEPTION(6, "MSEN fail\n");
+		return PTR_ERR(request);
+	}
+
+	request->op = TO_MSEN;
+	tape_ccw_end(request->cpaddr, SENSE, 32, request->cpdata);
+
+	rc = tape_do_io_interruptible(device, request);
+	if (request->rc == 0) {
+		sense = request->cpdata;
+
+		/*
+		 * This isn't quite correct. But since INTERVENTION_REQUIRED
+		 * means that the drive is 'neither ready nor on-line' it is
+		 * only slightly inaccurate to say there is no tape loaded if
+		 * the drive isn't online...
+		 */
+		if (sense[0] & SENSE_INTERVENTION_REQUIRED)
+			tape_med_state_set(device, MS_UNLOADED);
+		else
+			tape_med_state_set(device, MS_LOADED);
+
+		if (sense[1] & SENSE_WRITE_PROTECT)
+			device->tape_generic_status |= GMT_WR_PROT(~0);
+		else
+			device->tape_generic_status &= ~GMT_WR_PROT(~0);
+	} else {
+		DBF_EVENT(4, "tape_34xx: medium sense failed with rc=%d\n",
+			request->rc);
+	}
+	tape_free_request(request);
+
+	return rc;
+}
+
+/*
+ * These functions are currently used only to schedule a medium_sense for
+ * later execution. This is because we get an interrupt whenever a medium
+ * is inserted but cannot call tape_do_io* from an interrupt context.
+ * Maybe that's useful for other actions we want to start from the
+ * interrupt handler.
+ */
+static void
+tape_34xx_work_handler(void *data)
+{
+	struct {
+		struct tape_device	*device;
+		enum tape_op		 op;
+		struct work_struct	 work;
+	} *p = data;
+
+	switch(p->op) {
+		case TO_MSEN:
+			tape_34xx_medium_sense(p->device);
+			break;
+		default:
+			DBF_EVENT(3, "T34XX: internal error: unknown work\n");
+	}
+
+	p->device = tape_put_device(p->device);
+	kfree(p);
+}
+
+static int
+tape_34xx_schedule_work(struct tape_device *device, enum tape_op op)
+{
+	struct {
+		struct tape_device	*device;
+		enum tape_op		 op;
+		struct work_struct	 work;
+	} *p;
+
+	if ((p = kmalloc(sizeof(*p), GFP_ATOMIC)) == NULL)
+		return -ENOMEM;
+
+	memset(p, 0, sizeof(*p));
+	INIT_WORK(&p->work, tape_34xx_work_handler, p);
+
+	p->device = tape_get_device_reference(device);
+	p->op     = op;
+
+	schedule_work(&p->work);
+	return 0;
+}
+
+/*
+ * Done Handler is called when dev stat = DEVICE-END (successful operation)
+ */
+static inline int
+tape_34xx_done(struct tape_request *request)
+{
+	DBF_EVENT(6, "%s done\n", tape_op_verbose[request->op]);
+
+	switch (request->op) {
+		case TO_DSE:
+		case TO_RUN:
+		case TO_WRI:
+		case TO_WTM:
+		case TO_ASSIGN:
+		case TO_UNASSIGN:
+			tape_34xx_delete_sbid_from(request->device, 0);
+			break;
+		default:
+			;
+	}
+	return TAPE_IO_SUCCESS;
+}
+
+static inline int
+tape_34xx_erp_failed(struct tape_request *request, int rc)
+{
+	DBF_EVENT(3, "Error recovery failed for %s (RC=%d)\n",
+		  tape_op_verbose[request->op], rc);
+	return rc;
+}
+
+static inline int
+tape_34xx_erp_succeeded(struct tape_request *request)
+{
+	DBF_EVENT(3, "Error Recovery successful for %s\n",
+		  tape_op_verbose[request->op]);
+	return tape_34xx_done(request);
+}
+
+static inline int
+tape_34xx_erp_retry(struct tape_request *request)
+{
+	DBF_EVENT(3, "xerp retr %s\n", tape_op_verbose[request->op]);
+	return TAPE_IO_RETRY;
+}
+
+/*
+ * This function is called, when no request is outstanding and we get an
+ * interrupt
+ */
+static int
+tape_34xx_unsolicited_irq(struct tape_device *device, struct irb *irb)
+{
+	if (irb->scsw.dstat == 0x85 /* READY */) {
+		/* A medium was inserted in the drive. */
+		DBF_EVENT(6, "xuud med\n");
+		tape_34xx_delete_sbid_from(device, 0);
+		tape_34xx_schedule_work(device, TO_MSEN);
+	} else {
+		DBF_EVENT(3, "unsol.irq! dev end: %08x\n", device->cdev_id);
+		PRINT_WARN("Unsolicited IRQ (Device End) caught.\n");
+		tape_dump_sense(device, NULL, irb);
+	}
+	return TAPE_IO_SUCCESS;
+}
+
+/*
+ * Read Opposite Error Recovery Function:
+ * Used, when Read Forward does not work
+ */
+static int
+tape_34xx_erp_read_opposite(struct tape_device *device,
+			    struct tape_request *request)
+{
+	if (request->op == TO_RFO) {
+		/*
+		 * We did read forward, but the data could not be read
+		 * *correctly*. We transform the request to a read backward
+		 * and try again.
+		 */
+		tape_std_read_backward(device, request);
+		return tape_34xx_erp_retry(request);
+	}
+	if (request->op != TO_RBA)
+		PRINT_ERR("read_opposite called with state:%s\n",
+			  tape_op_verbose[request->op]);
+	/*
+	 * We tried to read forward and backward, but hat no
+	 * success -> failed.
+	 */
+	return tape_34xx_erp_failed(request, -EIO);
+}
+
+static int
+tape_34xx_erp_bug(struct tape_device *device, struct tape_request *request,
+		  struct irb *irb, int no)
+{
+	if (request->op != TO_ASSIGN) {
+		PRINT_WARN("An unexpected condition #%d was caught in "
+			   "tape error recovery.\n", no);
+		PRINT_WARN("Please report this incident.\n");
+		if (request)
+			PRINT_WARN("Operation of tape:%s\n",
+				   tape_op_verbose[request->op]);
+		tape_dump_sense(device, request, irb);
+	}
+	return tape_34xx_erp_failed(request, -EIO);
+}
+
+/*
+ * Handle data overrun between cu and drive. The channel speed might
+ * be too slow.
+ */
+static int
+tape_34xx_erp_overrun(struct tape_device *device, struct tape_request *request,
+		      struct irb *irb)
+{
+	if (irb->ecw[3] == 0x40) {
+		PRINT_WARN ("Data overrun error between control-unit "
+			    "and drive. Use a faster channel connection, "
+			    "if possible! \n");
+		return tape_34xx_erp_failed(request, -EIO);
+	}
+	return tape_34xx_erp_bug(device, request, irb, -1);
+}
+
+/*
+ * Handle record sequence error.
+ */
+static int
+tape_34xx_erp_sequence(struct tape_device *device,
+		       struct tape_request *request, struct irb *irb)
+{
+	if (irb->ecw[3] == 0x41) {
+		/*
+		 * cu detected incorrect block-id sequence on tape.
+		 */
+		PRINT_WARN("Illegal block-id sequence found!\n");
+		return tape_34xx_erp_failed(request, -EIO);
+	}
+	/*
+	 * Record sequence error bit is set, but erpa does not
+	 * show record sequence error.
+	 */
+	return tape_34xx_erp_bug(device, request, irb, -2);
+}
+
+/*
+ * This function analyses the tape's sense-data in case of a unit-check.
+ * If possible, it tries to recover from the error. Else the user is
+ * informed about the problem.
+ */
+static int
+tape_34xx_unit_check(struct tape_device *device, struct tape_request *request,
+		     struct irb *irb)
+{
+	int inhibit_cu_recovery;
+	__u8* sense;
+
+	inhibit_cu_recovery = (*device->modeset_byte & 0x80) ? 1 : 0;
+	sense = irb->ecw;
+
+#ifdef CONFIG_S390_TAPE_BLOCK
+	if (request->op == TO_BLOCK) {
+		/*
+		 * Recovery for block device requests. Set the block_position
+		 * to something invalid and retry.
+		 */
+		device->blk_data.block_position = -1;
+		if (request->retries-- <= 0)
+			return tape_34xx_erp_failed(request, -EIO);
+		else
+			return tape_34xx_erp_retry(request);
+	}
+#endif
+
+	if (
+		sense[0] & SENSE_COMMAND_REJECT &&
+		sense[1] & SENSE_WRITE_PROTECT
+	) {
+		if (
+			request->op == TO_DSE ||
+			request->op == TO_WRI ||
+			request->op == TO_WTM
+		) {
+			/* medium is write protected */
+			return tape_34xx_erp_failed(request, -EACCES);
+		} else {
+			return tape_34xx_erp_bug(device, request, irb, -3);
+		}
+	}
+
+	/*
+	 * Special cases for various tape-states when reaching
+	 * end of recorded area
+	 *
+	 * FIXME: Maybe a special case of the special case:
+	 *        sense[0] == SENSE_EQUIPMENT_CHECK &&
+	 *        sense[1] == SENSE_DRIVE_ONLINE    &&
+	 *        sense[3] == 0x47 (Volume Fenced)
+	 *
+	 *        This was caused by continued FSF or FSR after an
+	 *        'End Of Data'.
+	 */
+	if ((
+		sense[0] == SENSE_DATA_CHECK      ||
+		sense[0] == SENSE_EQUIPMENT_CHECK ||
+		sense[0] == SENSE_EQUIPMENT_CHECK + SENSE_DEFERRED_UNIT_CHECK
+	) && (
+		sense[1] == SENSE_DRIVE_ONLINE ||
+		sense[1] == SENSE_BEGINNING_OF_TAPE + SENSE_WRITE_MODE
+	)) {
+		switch (request->op) {
+		/*
+		 * sense[0] == SENSE_DATA_CHECK   &&
+		 * sense[1] == SENSE_DRIVE_ONLINE
+		 * sense[3] == 0x36 (End Of Data)
+		 *
+		 * Further seeks might return a 'Volume Fenced'.
+		 */
+		case TO_FSF:
+		case TO_FSB:
+			/* Trying to seek beyond end of recorded area */
+			return tape_34xx_erp_failed(request, -ENOSPC);
+		case TO_BSB:
+			return tape_34xx_erp_retry(request);
+
+		/*
+		 * sense[0] == SENSE_DATA_CHECK   &&
+		 * sense[1] == SENSE_DRIVE_ONLINE &&
+		 * sense[3] == 0x36 (End Of Data)
+		 */
+		case TO_LBL:
+			/* Block could not be located. */
+			tape_34xx_delete_sbid_from(device, 0);
+			return tape_34xx_erp_failed(request, -EIO);
+
+		case TO_RFO:
+			/* Read beyond end of recorded area -> 0 bytes read */
+			return tape_34xx_erp_failed(request, 0);
+
+		/*
+		 * sense[0] == SENSE_EQUIPMENT_CHECK &&
+		 * sense[1] == SENSE_DRIVE_ONLINE    &&
+		 * sense[3] == 0x38 (Physical End Of Volume)
+		 */
+		case TO_WRI:
+			/* Writing at physical end of volume */
+			return tape_34xx_erp_failed(request, -ENOSPC);
+		default:
+			PRINT_ERR("Invalid op in %s:%i\n",
+				  __FUNCTION__, __LINE__);
+			return tape_34xx_erp_failed(request, 0);
+		}
+	}
+
+	/* Sensing special bits */
+	if (sense[0] & SENSE_BUS_OUT_CHECK)
+		return tape_34xx_erp_retry(request);
+
+	if (sense[0] & SENSE_DATA_CHECK) {
+		/*
+		 * hardware failure, damaged tape or improper
+		 * operating conditions
+		 */
+		switch (sense[3]) {
+		case 0x23:
+			/* a read data check occurred */
+			if ((sense[2] & SENSE_TAPE_SYNC_MODE) ||
+			    inhibit_cu_recovery)
+				// data check is not permanent, may be
+				// recovered. We always use async-mode with
+				// cu-recovery, so this should *never* happen.
+				return tape_34xx_erp_bug(device, request,
+							 irb, -4);
+
+			/* data check is permanent, CU recovery has failed */
+			PRINT_WARN("Permanent read error\n");
+			return tape_34xx_erp_failed(request, -EIO);
+		case 0x25:
+			// a write data check occurred
+			if ((sense[2] & SENSE_TAPE_SYNC_MODE) ||
+			    inhibit_cu_recovery)
+				// data check is not permanent, may be
+				// recovered. We always use async-mode with
+				// cu-recovery, so this should *never* happen.
+				return tape_34xx_erp_bug(device, request,
+							 irb, -5);
+
+			// data check is permanent, cu-recovery has failed
+			PRINT_WARN("Permanent write error\n");
+			return tape_34xx_erp_failed(request, -EIO);
+		case 0x26:
+			/* Data Check (read opposite) occurred. */
+			return tape_34xx_erp_read_opposite(device, request);
+		case 0x28:
+			/* ID-Mark at tape start couldn't be written */
+			PRINT_WARN("ID-Mark could not be written.\n");
+			return tape_34xx_erp_failed(request, -EIO);
+		case 0x31:
+			/* Tape void. Tried to read beyond end of device. */
+			PRINT_WARN("Read beyond end of recorded area.\n");
+			return tape_34xx_erp_failed(request, -ENOSPC);
+		case 0x41:
+			/* Record sequence error. */
+			PRINT_WARN("Invalid block-id sequence found.\n");
+			return tape_34xx_erp_failed(request, -EIO);
+		default:
+			/* all data checks for 3480 should result in one of
+			 * the above erpa-codes. For 3490, other data-check
+			 * conditions do exist. */
+			if (device->cdev->id.driver_info == tape_3480)
+				return tape_34xx_erp_bug(device, request,
+							 irb, -6);
+		}
+	}
+
+	if (sense[0] & SENSE_OVERRUN)
+		return tape_34xx_erp_overrun(device, request, irb);
+
+	if (sense[1] & SENSE_RECORD_SEQUENCE_ERR)
+		return tape_34xx_erp_sequence(device, request, irb);
+
+	/* Sensing erpa codes */
+	switch (sense[3]) {
+	case 0x00:
+		/* Unit check with erpa code 0. Report and ignore. */
+		PRINT_WARN("Non-error sense was found. "
+			   "Unit-check will be ignored.\n");
+		return TAPE_IO_SUCCESS;
+	case 0x21:
+		/*
+		 * Data streaming not operational. CU will switch to
+		 * interlock mode. Reissue the command.
+		 */
+		PRINT_WARN("Data streaming not operational. "
+			   "Switching to interlock-mode.\n");
+		return tape_34xx_erp_retry(request);
+	case 0x22:
+		/*
+		 * Path equipment check. Might be drive adapter error, buffer
+		 * error on the lower interface, internal path not usable,
+		 * or error during cartridge load.
+		 */
+		PRINT_WARN("A path equipment check occurred. One of the "
+			   "following conditions occurred:\n");
+		PRINT_WARN("drive adapter error, buffer error on the lower "
+			   "interface, internal path not usable, error "
+			   "during cartridge load.\n");
+		return tape_34xx_erp_failed(request, -EIO);
+	case 0x24:
+		/*
+		 * Load display check. Load display was command was issued,
+		 * but the drive is displaying a drive check message. Can
+		 * be threated as "device end".
+		 */
+		return tape_34xx_erp_succeeded(request);
+	case 0x27:
+		/*
+		 * Command reject. May indicate illegal channel program or
+		 * buffer over/underrun. Since all channel programs are
+		 * issued by this driver and ought be correct, we assume a
+		 * over/underrun situation and retry the channel program.
+		 */
+		return tape_34xx_erp_retry(request);
+	case 0x29:
+		/*
+		 * Function incompatible. Either the tape is idrc compressed
+		 * but the hardware isn't capable to do idrc, or a perform
+		 * subsystem func is issued and the CU is not on-line.
+		 */
+		PRINT_WARN ("Function incompatible. Try to switch off idrc\n");
+		return tape_34xx_erp_failed(request, -EIO);
+	case 0x2a:
+		/*
+		 * Unsolicited environmental data. An internal counter
+		 * overflows, we can ignore this and reissue the cmd.
+		 */
+		return tape_34xx_erp_retry(request);
+	case 0x2b:
+		/*
+		 * Environmental data present. Indicates either unload
+		 * completed ok or read buffered log command completed ok.
+		 */
+		if (request->op == TO_RUN) {
+			/* Rewind unload completed ok. */
+			tape_med_state_set(device, MS_UNLOADED);
+			return tape_34xx_erp_succeeded(request);
+		}
+		/* tape_34xx doesn't use read buffered log commands. */
+		return tape_34xx_erp_bug(device, request, irb, sense[3]);
+	case 0x2c:
+		/*
+		 * Permanent equipment check. CU has tried recovery, but
+		 * did not succeed.
+		 */
+		return tape_34xx_erp_failed(request, -EIO);
+	case 0x2d:
+		/* Data security erase failure. */
+		if (request->op == TO_DSE)
+			return tape_34xx_erp_failed(request, -EIO);
+		/* Data security erase failure, but no such command issued. */
+		return tape_34xx_erp_bug(device, request, irb, sense[3]);
+	case 0x2e:
+		/*
+		 * Not capable. This indicates either that the drive fails
+		 * reading the format id mark or that that format specified
+		 * is not supported by the drive.
+		 */
+		PRINT_WARN("Drive not capable processing the tape format!\n");
+		return tape_34xx_erp_failed(request, -EMEDIUMTYPE);
+	case 0x30:
+		/* The medium is write protected. */
+		PRINT_WARN("Medium is write protected!\n");
+		return tape_34xx_erp_failed(request, -EACCES);
+	case 0x32:
+		// Tension loss. We cannot recover this, it's an I/O error.
+		PRINT_WARN("The drive lost tape tension.\n");
+		return tape_34xx_erp_failed(request, -EIO);
+	case 0x33:
+		/*
+		 * Load Failure. The cartridge was not inserted correctly or
+		 * the tape is not threaded correctly.
+		 */
+		PRINT_WARN("Cartridge load failure. Reload the cartridge "
+			   "and try again.\n");
+		tape_34xx_delete_sbid_from(device, 0);
+		return tape_34xx_erp_failed(request, -EIO);
+	case 0x34:
+		/*
+		 * Unload failure. The drive cannot maintain tape tension
+		 * and control tape movement during an unload operation.
+		 */
+		PRINT_WARN("Failure during cartridge unload. "
+			   "Please try manually.\n");
+		if (request->op == TO_RUN)
+			return tape_34xx_erp_failed(request, -EIO);
+		return tape_34xx_erp_bug(device, request, irb, sense[3]);
+	case 0x35:
+		/*
+		 * Drive equipment check. One of the following:
+		 * - cu cannot recover from a drive detected error
+		 * - a check code message is shown on drive display
+		 * - the cartridge loader does not respond correctly
+		 * - a failure occurs during an index, load, or unload cycle
+		 */
+		PRINT_WARN("Equipment check! Please check the drive and "
+			   "the cartridge loader.\n");
+		return tape_34xx_erp_failed(request, -EIO);
+	case 0x36:
+		if (device->cdev->id.driver_info == tape_3490)
+			/* End of data. */
+			return tape_34xx_erp_failed(request, -EIO);
+		/* This erpa is reserved for 3480 */
+		return tape_34xx_erp_bug(device, request, irb, sense[3]);
+	case 0x37:
+		/*
+		 * Tape length error. The tape is shorter than reported in
+		 * the beginning-of-tape data.
+		 */
+		PRINT_WARN("Tape length error.\n");
+		return tape_34xx_erp_failed(request, -EIO);
+	case 0x38:
+		/*
+		 * Physical end of tape. A read/write operation reached
+		 * the physical end of tape.
+		 */
+		if (request->op==TO_WRI ||
+		    request->op==TO_DSE ||
+		    request->op==TO_WTM)
+			return tape_34xx_erp_failed(request, -ENOSPC);
+		return tape_34xx_erp_failed(request, -EIO);
+	case 0x39:
+		/* Backward at Beginning of tape. */
+		return tape_34xx_erp_failed(request, -EIO);
+	case 0x3a:
+		/* Drive switched to not ready. */
+		PRINT_WARN("Drive not ready. Turn the ready/not ready switch "
+			   "to ready position and try again.\n");
+		return tape_34xx_erp_failed(request, -EIO);
+	case 0x3b:
+		/* Manual rewind or unload. This causes an I/O error. */
+		PRINT_WARN("Medium was rewound or unloaded manually.\n");
+		tape_34xx_delete_sbid_from(device, 0);
+		return tape_34xx_erp_failed(request, -EIO);
+	case 0x42:
+		/*
+		 * Degraded mode. A condition that can cause degraded
+		 * performance is detected.
+		 */
+		PRINT_WARN("Subsystem is running in degraded mode.\n");
+		return tape_34xx_erp_retry(request);
+	case 0x43:
+		/* Drive not ready. */
+		tape_34xx_delete_sbid_from(device, 0);
+		tape_med_state_set(device, MS_UNLOADED);
+		/* Some commands commands are successful even in this case */
+		if (sense[1] & SENSE_DRIVE_ONLINE) {
+			switch(request->op) {
+				case TO_ASSIGN:
+				case TO_UNASSIGN:
+				case TO_DIS:
+				case TO_NOP:
+					return tape_34xx_done(request);
+					break;
+				default:
+					break;
+			}
+		}
+		PRINT_WARN("The drive is not ready.\n");
+		return tape_34xx_erp_failed(request, -ENOMEDIUM);
+	case 0x44:
+		/* Locate Block unsuccessful. */
+		if (request->op != TO_BLOCK && request->op != TO_LBL)
+			/* No locate block was issued. */
+			return tape_34xx_erp_bug(device, request,
+						 irb, sense[3]);
+		return tape_34xx_erp_failed(request, -EIO);
+	case 0x45:
+		/* The drive is assigned to a different channel path. */
+		PRINT_WARN("The drive is assigned elsewhere.\n");
+		return tape_34xx_erp_failed(request, -EIO);
+	case 0x46:
+		/*
+		 * Drive not on-line. Drive may be switched offline,
+		 * the power supply may be switched off or
+		 * the drive address may not be set correctly.
+		 */
+		PRINT_WARN("The drive is not on-line.");
+		return tape_34xx_erp_failed(request, -EIO);
+	case 0x47:
+		/* Volume fenced. CU reports volume integrity is lost. */
+		PRINT_WARN("Volume fenced. The volume integrity is lost.\n");
+		tape_34xx_delete_sbid_from(device, 0);
+		return tape_34xx_erp_failed(request, -EIO);
+	case 0x48:
+		/* Log sense data and retry request. */
+		return tape_34xx_erp_retry(request);
+	case 0x49:
+		/* Bus out check. A parity check error on the bus was found. */
+		PRINT_WARN("Bus out check. A data transfer over the bus "
+			   "has been corrupted.\n");
+		return tape_34xx_erp_failed(request, -EIO);
+	case 0x4a:
+		/* Control unit erp failed. */
+		PRINT_WARN("The control unit I/O error recovery failed.\n");
+		return tape_34xx_erp_failed(request, -EIO);
+	case 0x4b:
+		/*
+		 * CU and drive incompatible. The drive requests micro-program
+		 * patches, which are not available on the CU.
+		 */
+		PRINT_WARN("The drive needs microprogram patches from the "
+			   "control unit, which are not available.\n");
+		return tape_34xx_erp_failed(request, -EIO);
+	case 0x4c:
+		/*
+		 * Recovered Check-One failure. Cu develops a hardware error,
+		 * but is able to recover.
+		 */
+		return tape_34xx_erp_retry(request);
+	case 0x4d:
+		if (device->cdev->id.driver_info == tape_3490)
+			/*
+			 * Resetting event received. Since the driver does
+			 * not support resetting event recovery (which has to
+			 * be handled by the I/O Layer), retry our command.
+			 */
+			return tape_34xx_erp_retry(request);
+		/* This erpa is reserved for 3480. */
+		return tape_34xx_erp_bug(device, request, irb, sense[3]);
+	case 0x4e:
+		if (device->cdev->id.driver_info == tape_3490) {
+			/*
+			 * Maximum block size exceeded. This indicates, that
+			 * the block to be written is larger than allowed for
+			 * buffered mode.
+			 */
+			PRINT_WARN("Maximum block size for buffered "
+				   "mode exceeded.\n");
+			return tape_34xx_erp_failed(request, -ENOBUFS);
+		}
+		/* This erpa is reserved for 3480. */
+		return tape_34xx_erp_bug(device, request, irb, sense[3]);
+	case 0x50:
+		/*
+		 * Read buffered log (Overflow). CU is running in extended
+		 * buffered log mode, and a counter overflows. This should
+		 * never happen, since we're never running in extended
+		 * buffered log mode.
+		 */
+		return tape_34xx_erp_retry(request);
+	case 0x51:
+		/*
+		 * Read buffered log (EOV). EOF processing occurs while the
+		 * CU is in extended buffered log mode. This should never
+		 * happen, since we're never running in extended buffered
+		 * log mode.
+		 */
+		return tape_34xx_erp_retry(request);
+	case 0x52:
+		/* End of Volume complete. Rewind unload completed ok. */
+		if (request->op == TO_RUN) {
+			tape_med_state_set(device, MS_UNLOADED);
+			tape_34xx_delete_sbid_from(device, 0);
+			return tape_34xx_erp_succeeded(request);
+		}
+		return tape_34xx_erp_bug(device, request, irb, sense[3]);
+	case 0x53:
+		/* Global command intercept. */
+		return tape_34xx_erp_retry(request);
+	case 0x54:
+		/* Channel interface recovery (temporary). */
+		return tape_34xx_erp_retry(request);
+	case 0x55:
+		/* Channel interface recovery (permanent). */
+		PRINT_WARN("A permanent channel interface error occurred.\n");
+		return tape_34xx_erp_failed(request, -EIO);
+	case 0x56:
+		/* Channel protocol error. */
+		PRINT_WARN("A channel protocol error occurred.\n");
+		return tape_34xx_erp_failed(request, -EIO);
+	case 0x57:
+		if (device->cdev->id.driver_info == tape_3480) {
+			/* Attention intercept. */
+			PRINT_WARN("An attention intercept occurred, "
+				   "which will be recovered.\n");
+			return tape_34xx_erp_retry(request);
+		} else {
+			/* Global status intercept. */
+			PRINT_WARN("An global status intercept was received, "
+				   "which will be recovered.\n");
+			return tape_34xx_erp_retry(request);
+		}
+	case 0x5a:
+		/*
+		 * Tape length incompatible. The tape inserted is too long,
+		 * which could cause damage to the tape or the drive.
+		 */
+		PRINT_WARN("Tape Length Incompatible\n");
+		PRINT_WARN("Tape length exceeds IBM enhanced capacity "
+			"cartdridge length or a medium\n");
+		PRINT_WARN("with EC-CST identification mark has been mounted "
+			"in a device that writes\n");
+		PRINT_WARN("3480 or 3480 XF format.\n");
+		return tape_34xx_erp_failed(request, -EIO);
+	case 0x5b:
+		/* Format 3480 XF incompatible */
+		if (sense[1] & SENSE_BEGINNING_OF_TAPE)
+			/* The tape will get overwritten. */
+			return tape_34xx_erp_retry(request);
+		PRINT_WARN("Format 3480 XF Incompatible\n");
+		PRINT_WARN("Medium has been created in 3480 format. "
+			"To change the format writes\n");
+		PRINT_WARN("must be issued at BOT.\n");
+		return tape_34xx_erp_failed(request, -EIO);
+	case 0x5c:
+		/* Format 3480-2 XF incompatible */
+		PRINT_WARN("Format 3480-2 XF Incompatible\n");
+		PRINT_WARN("Device can only read 3480 or 3480 XF format.\n");
+		return tape_34xx_erp_failed(request, -EIO);
+	case 0x5d:
+		/* Tape length violation. */
+		PRINT_WARN("Tape Length Violation\n");
+		PRINT_WARN("The mounted tape exceeds IBM Enhanced Capacity "
+			"Cartdridge System Tape length.\n");
+		PRINT_WARN("This may cause damage to the drive or tape when "
+			"processing to the EOV\n");
+		return tape_34xx_erp_failed(request, -EMEDIUMTYPE);
+	case 0x5e:
+		/* Compaction algorithm incompatible. */
+		PRINT_WARN("Compaction Algorithm Incompatible\n");
+		PRINT_WARN("The volume is recorded using an incompatible "
+			"compaction algorithm,\n");
+		PRINT_WARN("which is not supported by the device.\n");
+		return tape_34xx_erp_failed(request, -EMEDIUMTYPE);
+
+		/* The following erpas should have been covered earlier. */
+	case 0x23: /* Read data check. */
+	case 0x25: /* Write data check. */
+	case 0x26: /* Data check (read opposite). */
+	case 0x28: /* Write id mark check. */
+	case 0x31: /* Tape void. */
+	case 0x40: /* Overrun error. */
+	case 0x41: /* Record sequence error. */
+		/* All other erpas are reserved for future use. */
+	default:
+		return tape_34xx_erp_bug(device, request, irb, sense[3]);
+	}
+}
+
+/*
+ * 3480/3490 interrupt handler
+ */
+static int
+tape_34xx_irq(struct tape_device *device, struct tape_request *request,
+	      struct irb *irb)
+{
+	if (request == NULL)
+		return tape_34xx_unsolicited_irq(device, irb);
+
+	if ((irb->scsw.dstat & DEV_STAT_UNIT_EXCEP) &&
+	    (irb->scsw.dstat & DEV_STAT_DEV_END) &&
+	    (request->op == TO_WRI)) {
+		/* Write at end of volume */
+		PRINT_INFO("End of volume\n"); /* XXX */
+		return tape_34xx_erp_failed(request, -ENOSPC);
+	}
+
+	if (irb->scsw.dstat & DEV_STAT_UNIT_CHECK)
+		return tape_34xx_unit_check(device, request, irb);
+
+	if (irb->scsw.dstat & DEV_STAT_DEV_END) {
+		/*
+		 * A unit exception occurs on skipping over a tapemark block.
+		 */
+		if (irb->scsw.dstat & DEV_STAT_UNIT_EXCEP) {
+			if (request->op == TO_BSB || request->op == TO_FSB)
+				request->rescnt++;
+			else
+				DBF_EVENT(5, "Unit Exception!\n");
+		}
+		return tape_34xx_done(request);
+	}
+
+	DBF_EVENT(6, "xunknownirq\n");
+	PRINT_ERR("Unexpected interrupt.\n");
+	PRINT_ERR("Current op is: %s", tape_op_verbose[request->op]);
+	tape_dump_sense(device, request, irb);
+	return TAPE_IO_STOP;
+}
+
+/*
+ * ioctl_overload
+ */
+static int
+tape_34xx_ioctl(struct tape_device *device, unsigned int cmd, unsigned long arg)
+{
+	if (cmd == TAPE390_DISPLAY) {
+		struct display_struct disp;
+
+		if (copy_from_user(&disp, (char __user *) arg, sizeof(disp)) != 0)
+			return -EFAULT;
+
+		return tape_std_display(device, &disp);
+	} else
+		return -EINVAL;
+}
+
+static inline void
+tape_34xx_append_new_sbid(struct tape_34xx_block_id bid, struct list_head *l)
+{
+	struct tape_34xx_sbid *	new_sbid;
+
+	new_sbid = kmalloc(sizeof(*new_sbid), GFP_ATOMIC);
+	if (!new_sbid)
+		return;
+
+	new_sbid->bid = bid;
+	list_add(&new_sbid->list, l);
+}
+
+/*
+ * Build up the search block ID list. The block ID consists of a logical
+ * block number and a hardware specific part. The hardware specific part
+ * helps the tape drive to speed up searching for a specific block.
+ */
+static void
+tape_34xx_add_sbid(struct tape_device *device, struct tape_34xx_block_id bid)
+{
+	struct list_head *	sbid_list;
+	struct tape_34xx_sbid *	sbid;
+	struct list_head *	l;
+
+	/*
+	 * immediately return if there is no list at all or the block to add
+	 * is located in segment 1 of wrap 0 because this position is used
+	 * if no hardware position data is supplied.
+	 */
+	sbid_list = (struct list_head *) device->discdata;
+	if (!sbid_list || (bid.segment < 2 && bid.wrap == 0))
+		return;
+
+	/*
+	 * Search the position where to insert the new entry. Hardware
+	 * acceleration uses only the segment and wrap number. So we
+	 * need only one entry for a specific wrap/segment combination.
+	 * If there is a block with a lower number but the same hard-
+	 * ware position data we just update the block number in the
+	 * existing entry.
+	 */
+	list_for_each(l, sbid_list) {
+		sbid = list_entry(l, struct tape_34xx_sbid, list);
+
+		if (
+			(sbid->bid.segment == bid.segment) &&
+			(sbid->bid.wrap    == bid.wrap)
+		) {
+			if (bid.block < sbid->bid.block)
+				sbid->bid = bid;
+			else return;
+			break;
+		}
+
+		/* Sort in according to logical block number. */
+		if (bid.block < sbid->bid.block) {
+			tape_34xx_append_new_sbid(bid, l->prev);
+			break;
+		}
+	}
+	/* List empty or new block bigger than last entry. */
+	if (l == sbid_list)
+		tape_34xx_append_new_sbid(bid, l->prev);
+
+	DBF_LH(4, "Current list is:\n");
+	list_for_each(l, sbid_list) {
+		sbid = list_entry(l, struct tape_34xx_sbid, list);
+		DBF_LH(4, "%d:%03d@%05d\n",
+			sbid->bid.wrap,
+			sbid->bid.segment,
+			sbid->bid.block
+		);
+	}
+}
+
+/*
+ * Delete all entries from the search block ID list that belong to tape blocks
+ * equal or higher than the given number.
+ */
+static void
+tape_34xx_delete_sbid_from(struct tape_device *device, int from)
+{
+	struct list_head *	sbid_list;
+	struct tape_34xx_sbid *	sbid;
+	struct list_head *	l;
+	struct list_head *	n;
+
+	sbid_list = (struct list_head *) device->discdata;
+	if (!sbid_list)
+		return;
+
+	list_for_each_safe(l, n, sbid_list) {
+		sbid = list_entry(l, struct tape_34xx_sbid, list);
+		if (sbid->bid.block >= from) {
+			DBF_LH(4, "Delete sbid %d:%03d@%05d\n",
+				sbid->bid.wrap,
+				sbid->bid.segment,
+				sbid->bid.block
+			);
+			list_del(l);
+			kfree(sbid);
+		}
+	}
+}
+
+/*
+ * Merge hardware position data into a block id.
+ */
+static void
+tape_34xx_merge_sbid(
+	struct tape_device *		device,
+	struct tape_34xx_block_id *	bid
+) {
+	struct tape_34xx_sbid *	sbid;
+	struct tape_34xx_sbid *	sbid_to_use;
+	struct list_head *	sbid_list;
+	struct list_head *	l;
+
+	sbid_list = (struct list_head *) device->discdata;
+	bid->wrap    = 0;
+	bid->segment = 1;
+
+	if (!sbid_list || list_empty(sbid_list))
+		return;
+
+	sbid_to_use = NULL;
+	list_for_each(l, sbid_list) {
+		sbid = list_entry(l, struct tape_34xx_sbid, list);
+
+		if (sbid->bid.block >= bid->block)
+			break;
+		sbid_to_use = sbid;
+	}
+	if (sbid_to_use) {
+		bid->wrap    = sbid_to_use->bid.wrap;
+		bid->segment = sbid_to_use->bid.segment;
+		DBF_LH(4, "Use %d:%03d@%05d for %05d\n",
+			sbid_to_use->bid.wrap,
+			sbid_to_use->bid.segment,
+			sbid_to_use->bid.block,
+			bid->block
+		);
+	}
+}
+
+static int
+tape_34xx_setup_device(struct tape_device * device)
+{
+	int			rc;
+	struct list_head *	discdata;
+
+	DBF_EVENT(6, "34xx device setup\n");
+	if ((rc = tape_std_assign(device)) == 0) {
+		if ((rc = tape_34xx_medium_sense(device)) != 0) {
+			DBF_LH(3, "34xx medium sense returned %d\n", rc);
+		}
+	}
+	discdata = kmalloc(sizeof(struct list_head), GFP_KERNEL);
+	if (discdata) {
+			INIT_LIST_HEAD(discdata);
+			device->discdata = discdata;
+	}
+
+	return rc;
+}
+
+static void
+tape_34xx_cleanup_device(struct tape_device *device)
+{
+	tape_std_unassign(device);
+	
+	if (device->discdata) {
+		tape_34xx_delete_sbid_from(device, 0);
+		kfree(device->discdata);
+		device->discdata = NULL;
+	}
+}
+
+
+/*
+ * MTTELL: Tell block. Return the number of block relative to current file.
+ */
+static int
+tape_34xx_mttell(struct tape_device *device, int mt_count)
+{
+	struct {
+		struct tape_34xx_block_id	cbid;
+		struct tape_34xx_block_id	dbid;
+	} __attribute__ ((packed)) block_id;
+	int rc;
+
+	rc = tape_std_read_block_id(device, (__u64 *) &block_id);
+	if (rc)
+		return rc;
+
+	tape_34xx_add_sbid(device, block_id.cbid);
+	return block_id.cbid.block;
+}
+
+/*
+ * MTSEEK: seek to the specified block.
+ */
+static int
+tape_34xx_mtseek(struct tape_device *device, int mt_count)
+{
+	struct tape_request *request;
+	struct tape_34xx_block_id *	bid;
+
+	if (mt_count > 0x3fffff) {
+		DBF_EXCEPTION(6, "xsee parm\n");
+		return -EINVAL;
+	}
+	request = tape_alloc_request(3, 4);
+	if (IS_ERR(request))
+		return PTR_ERR(request);
+
+	/* setup ccws */
+	request->op = TO_LBL;
+	bid         = (struct tape_34xx_block_id *) request->cpdata;
+	bid->format = (*device->modeset_byte & 0x08) ?
+			TAPE34XX_FMT_3480_XF : TAPE34XX_FMT_3480;
+	bid->block  = mt_count;
+	tape_34xx_merge_sbid(device, bid);
+
+	tape_ccw_cc(request->cpaddr, MODE_SET_DB, 1, device->modeset_byte);
+	tape_ccw_cc(request->cpaddr + 1, LOCATE, 4, request->cpdata);
+	tape_ccw_end(request->cpaddr + 2, NOP, 0, NULL);
+
+	/* execute it */
+	return tape_do_io_free(device, request);
+}
+
+#ifdef CONFIG_S390_TAPE_BLOCK
+/*
+ * Tape block read for 34xx.
+ */
+static struct tape_request *
+tape_34xx_bread(struct tape_device *device, struct request *req)
+{
+	struct tape_request *request;
+	struct ccw1 *ccw;
+	int count = 0, i;
+	unsigned off;
+	char *dst;
+	struct bio_vec *bv;
+	struct bio *bio;
+	struct tape_34xx_block_id *	start_block;
+
+	DBF_EVENT(6, "xBREDid:");
+
+	/* Count the number of blocks for the request. */
+	rq_for_each_bio(bio, req) {
+		bio_for_each_segment(bv, bio, i) {
+			count += bv->bv_len >> (TAPEBLOCK_HSEC_S2B + 9);
+		}
+	}
+
+	/* Allocate the ccw request. */
+	request = tape_alloc_request(3+count+1, 8);
+	if (IS_ERR(request))
+		return request;
+
+	/* Setup ccws. */
+	request->op = TO_BLOCK;
+	start_block = (struct tape_34xx_block_id *) request->cpdata;
+	start_block->block = req->sector >> TAPEBLOCK_HSEC_S2B;
+	DBF_EVENT(6, "start_block = %i\n", start_block->block);
+
+	ccw = request->cpaddr;
+	ccw = tape_ccw_cc(ccw, MODE_SET_DB, 1, device->modeset_byte);
+
+	/*
+	 * We always setup a nop after the mode set ccw. This slot is
+	 * used in tape_std_check_locate to insert a locate ccw if the
+	 * current tape position doesn't match the start block to be read.
+	 * The second nop will be filled with a read block id which is in
+	 * turn used by tape_34xx_free_bread to populate the segment bid
+	 * table.
+	 */
+	ccw = tape_ccw_cc(ccw, NOP, 0, NULL);
+	ccw = tape_ccw_cc(ccw, NOP, 0, NULL);
+
+	rq_for_each_bio(bio, req) {
+		bio_for_each_segment(bv, bio, i) {
+			dst = kmap(bv->bv_page) + bv->bv_offset;
+			for (off = 0; off < bv->bv_len;
+			     off += TAPEBLOCK_HSEC_SIZE) {
+				ccw->flags = CCW_FLAG_CC;
+				ccw->cmd_code = READ_FORWARD;
+				ccw->count = TAPEBLOCK_HSEC_SIZE;
+				set_normalized_cda(ccw, (void*) __pa(dst));
+				ccw++;
+				dst += TAPEBLOCK_HSEC_SIZE;
+			}
+		}
+	}
+
+	ccw = tape_ccw_end(ccw, NOP, 0, NULL);
+	DBF_EVENT(6, "xBREDccwg\n");
+	return request;
+}
+
+static void
+tape_34xx_free_bread (struct tape_request *request)
+{
+	struct ccw1* ccw;
+
+	ccw = request->cpaddr;
+	if ((ccw + 2)->cmd_code == READ_BLOCK_ID) {
+		struct {
+			struct tape_34xx_block_id	cbid;
+			struct tape_34xx_block_id	dbid;
+		} __attribute__ ((packed)) *rbi_data;
+
+		rbi_data = request->cpdata;
+
+		if (request->device)
+			tape_34xx_add_sbid(request->device, rbi_data->cbid);
+	}
+
+	/* Last ccw is a nop and doesn't need clear_normalized_cda */
+	for (; ccw->flags & CCW_FLAG_CC; ccw++)
+		if (ccw->cmd_code == READ_FORWARD)
+			clear_normalized_cda(ccw);
+	tape_free_request(request);
+}
+
+/*
+ * check_locate is called just before the tape request is passed to
+ * the common io layer for execution. It has to check the current
+ * tape position and insert a locate ccw if it doesn't match the
+ * start block for the request.
+ */
+static void
+tape_34xx_check_locate(struct tape_device *device, struct tape_request *request)
+{
+	struct tape_34xx_block_id *	start_block;
+
+	start_block = (struct tape_34xx_block_id *) request->cpdata;
+	if (start_block->block == device->blk_data.block_position)
+		return;
+
+	DBF_LH(4, "Block seek(%06d+%06d)\n", start_block->block, device->bof);
+	start_block->wrap    = 0;
+	start_block->segment = 1;
+	start_block->format  = (*device->modeset_byte & 0x08) ?
+				TAPE34XX_FMT_3480_XF :
+				TAPE34XX_FMT_3480;
+	start_block->block   = start_block->block + device->bof;
+	tape_34xx_merge_sbid(device, start_block);
+	tape_ccw_cc(request->cpaddr + 1, LOCATE, 4, request->cpdata);
+	tape_ccw_cc(request->cpaddr + 2, READ_BLOCK_ID, 8, request->cpdata);
+}
+#endif
+
+/*
+ * List of 3480/3490 magnetic tape commands.
+ */
+static tape_mtop_fn tape_34xx_mtop[TAPE_NR_MTOPS] = {
+	[MTRESET]	 = tape_std_mtreset,
+	[MTFSF]		 = tape_std_mtfsf,
+	[MTBSF]		 = tape_std_mtbsf,
+	[MTFSR]		 = tape_std_mtfsr,
+	[MTBSR]		 = tape_std_mtbsr,
+	[MTWEOF]	 = tape_std_mtweof,
+	[MTREW]		 = tape_std_mtrew,
+	[MTOFFL]	 = tape_std_mtoffl,
+	[MTNOP]		 = tape_std_mtnop,
+	[MTRETEN]	 = tape_std_mtreten,
+	[MTBSFM]	 = tape_std_mtbsfm,
+	[MTFSFM]	 = tape_std_mtfsfm,
+	[MTEOM]		 = tape_std_mteom,
+	[MTERASE]	 = tape_std_mterase,
+	[MTRAS1]	 = NULL,
+	[MTRAS2]	 = NULL,
+	[MTRAS3]	 = NULL,
+	[MTSETBLK]	 = tape_std_mtsetblk,
+	[MTSETDENSITY]	 = NULL,
+	[MTSEEK]	 = tape_34xx_mtseek,
+	[MTTELL]	 = tape_34xx_mttell,
+	[MTSETDRVBUFFER] = NULL,
+	[MTFSS]		 = NULL,
+	[MTBSS]		 = NULL,
+	[MTWSM]		 = NULL,
+	[MTLOCK]	 = NULL,
+	[MTUNLOCK]	 = NULL,
+	[MTLOAD]	 = tape_std_mtload,
+	[MTUNLOAD]	 = tape_std_mtunload,
+	[MTCOMPRESSION]	 = tape_std_mtcompression,
+	[MTSETPART]	 = NULL,
+	[MTMKPART]	 = NULL
+};
+
+/*
+ * Tape discipline structure for 3480 and 3490.
+ */
+static struct tape_discipline tape_discipline_34xx = {
+	.owner = THIS_MODULE,
+	.setup_device = tape_34xx_setup_device,
+	.cleanup_device = tape_34xx_cleanup_device,
+	.process_eov = tape_std_process_eov,
+	.irq = tape_34xx_irq,
+	.read_block = tape_std_read_block,
+	.write_block = tape_std_write_block,
+#ifdef CONFIG_S390_TAPE_BLOCK
+	.bread = tape_34xx_bread,
+	.free_bread = tape_34xx_free_bread,
+	.check_locate = tape_34xx_check_locate,
+#endif
+	.ioctl_fn = tape_34xx_ioctl,
+	.mtop_array = tape_34xx_mtop
+};
+
+static struct ccw_device_id tape_34xx_ids[] = {
+	{ CCW_DEVICE_DEVTYPE(0x3480, 0, 0x3480, 0), driver_info: tape_3480},
+	{ CCW_DEVICE_DEVTYPE(0x3490, 0, 0x3490, 0), driver_info: tape_3490},
+	{ /* end of list */ }
+};
+
+static int
+tape_34xx_online(struct ccw_device *cdev)
+{
+	return tape_generic_online(
+		cdev->dev.driver_data,
+		&tape_discipline_34xx
+	);
+}
+
+static int
+tape_34xx_offline(struct ccw_device *cdev)
+{
+	return tape_generic_offline(cdev->dev.driver_data);
+}
+
+static struct ccw_driver tape_34xx_driver = {
+	.name = "tape_34xx",
+	.owner = THIS_MODULE,
+	.ids = tape_34xx_ids,
+	.probe = tape_generic_probe,
+	.remove = tape_generic_remove,
+	.set_online = tape_34xx_online,
+	.set_offline = tape_34xx_offline,
+};
+
+static int
+tape_34xx_init (void)
+{
+	int rc;
+
+	TAPE_DBF_AREA = debug_register ( "tape_34xx", 1, 2, 4*sizeof(long));
+	debug_register_view(TAPE_DBF_AREA, &debug_sprintf_view);
+#ifdef DBF_LIKE_HELL
+	debug_set_level(TAPE_DBF_AREA, 6);
+#endif
+
+	DBF_EVENT(3, "34xx init: $Revision: 1.21 $\n");
+	/* Register driver for 3480/3490 tapes. */
+	rc = ccw_driver_register(&tape_34xx_driver);
+	if (rc)
+		DBF_EVENT(3, "34xx init failed\n");
+	else
+		DBF_EVENT(3, "34xx registered\n");
+	return rc;
+}
+
+static void
+tape_34xx_exit(void)
+{
+	ccw_driver_unregister(&tape_34xx_driver);
+
+	debug_unregister(TAPE_DBF_AREA);
+}
+
+MODULE_DEVICE_TABLE(ccw, tape_34xx_ids);
+MODULE_AUTHOR("(C) 2001-2002 IBM Deutschland Entwicklung GmbH");
+MODULE_DESCRIPTION("Linux on zSeries channel attached 3480 tape "
+		   "device driver ($Revision: 1.21 $)");
+MODULE_LICENSE("GPL");
+
+module_init(tape_34xx_init);
+module_exit(tape_34xx_exit);
diff --git a/drivers/s390/char/tape_block.c b/drivers/s390/char/tape_block.c
new file mode 100644
index 0000000..1efc9f2
--- /dev/null
+++ b/drivers/s390/char/tape_block.c
@@ -0,0 +1,492 @@
+/*
+ *  drivers/s390/char/tape_block.c
+ *    block device frontend for tape device driver
+ *
+ *  S390 and zSeries version
+ *    Copyright (C) 2001,2003 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *    Author(s): Carsten Otte <cotte@de.ibm.com>
+ *		 Tuan Ngo-Anh <ngoanh@de.ibm.com>
+ *		 Martin Schwidefsky <schwidefsky@de.ibm.com>
+ *		 Stefan Bader <shbader@de.ibm.com>
+ */
+
+#include <linux/fs.h>
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/blkdev.h>
+#include <linux/interrupt.h>
+#include <linux/buffer_head.h>
+
+#include <asm/debug.h>
+
+#define TAPE_DBF_AREA	tape_core_dbf
+
+#include "tape.h"
+
+#define PRINTK_HEADER "TAPE_BLOCK: "
+
+#define TAPEBLOCK_MAX_SEC	100
+#define TAPEBLOCK_MIN_REQUEUE	3
+
+/*
+ * 2003/11/25  Stefan Bader <shbader@de.ibm.com>
+ *
+ * In 2.5/2.6 the block device request function is very likely to be called
+ * with disabled interrupts (e.g. generic_unplug_device). So the driver can't
+ * just call any function that tries to allocate CCW requests from that con-
+ * text since it might sleep. There are two choices to work around this:
+ *	a) do not allocate with kmalloc but use its own memory pool
+ *      b) take requests from the queue outside that context, knowing that
+ *         allocation might sleep
+ */
+
+/*
+ * file operation structure for tape block frontend
+ */
+static int tapeblock_open(struct inode *, struct file *);
+static int tapeblock_release(struct inode *, struct file *);
+static int tapeblock_ioctl(struct inode *, struct file *, unsigned int,
+				unsigned long);
+static int tapeblock_medium_changed(struct gendisk *);
+static int tapeblock_revalidate_disk(struct gendisk *);
+
+static struct block_device_operations tapeblock_fops = {
+	.owner		 = THIS_MODULE,
+	.open		 = tapeblock_open,
+	.release	 = tapeblock_release,
+	.ioctl           = tapeblock_ioctl,
+	.media_changed   = tapeblock_medium_changed,
+	.revalidate_disk = tapeblock_revalidate_disk,
+};
+
+static int tapeblock_major = 0;
+
+static void
+tapeblock_trigger_requeue(struct tape_device *device)
+{
+	/* Protect against rescheduling. */
+	if (atomic_compare_and_swap(0, 1, &device->blk_data.requeue_scheduled))
+		return;
+	schedule_work(&device->blk_data.requeue_task);
+}
+
+/*
+ * Post finished request.
+ */
+static inline void
+tapeblock_end_request(struct request *req, int uptodate)
+{
+	if (end_that_request_first(req, uptodate, req->hard_nr_sectors))
+		BUG();
+	end_that_request_last(req);
+}
+
+static void
+__tapeblock_end_request(struct tape_request *ccw_req, void *data)
+{
+	struct tape_device *device;
+	struct request *req;
+
+	DBF_LH(6, "__tapeblock_end_request()\n");
+
+	device = ccw_req->device;
+	req = (struct request *) data;
+	tapeblock_end_request(req, ccw_req->rc == 0);
+	if (ccw_req->rc == 0)
+		/* Update position. */
+		device->blk_data.block_position =
+			(req->sector + req->nr_sectors) >> TAPEBLOCK_HSEC_S2B;
+	else
+		/* We lost the position information due to an error. */
+		device->blk_data.block_position = -1;
+	device->discipline->free_bread(ccw_req);
+	if (!list_empty(&device->req_queue) ||
+	    elv_next_request(device->blk_data.request_queue))
+		tapeblock_trigger_requeue(device);
+}
+
+/*
+ * Feed the tape device CCW queue with requests supplied in a list.
+ */
+static inline int
+tapeblock_start_request(struct tape_device *device, struct request *req)
+{
+	struct tape_request *	ccw_req;
+	int			rc;
+
+	DBF_LH(6, "tapeblock_start_request(%p, %p)\n", device, req);
+
+	ccw_req = device->discipline->bread(device, req);
+	if (IS_ERR(ccw_req)) {
+		DBF_EVENT(1, "TBLOCK: bread failed\n");
+		tapeblock_end_request(req, 0);
+		return PTR_ERR(ccw_req);
+	}
+	ccw_req->callback = __tapeblock_end_request;
+	ccw_req->callback_data = (void *) req;
+	ccw_req->retries = TAPEBLOCK_RETRIES;
+
+	rc = tape_do_io_async(device, ccw_req);
+	if (rc) {
+		/*
+		 * Start/enqueueing failed. No retries in
+		 * this case.
+		 */
+		tapeblock_end_request(req, 0);
+		device->discipline->free_bread(ccw_req);
+	}
+
+	return rc;
+}
+
+/*
+ * Move requests from the block device request queue to the tape device ccw
+ * queue.
+ */
+static void
+tapeblock_requeue(void *data) {
+	struct tape_device *	device;
+	request_queue_t *	queue;
+	int			nr_queued;
+	struct request *	req;
+	struct list_head *	l;
+	int			rc;
+
+	device = (struct tape_device *) data;
+	if (!device)
+		return;
+
+	spin_lock_irq(get_ccwdev_lock(device->cdev));
+	queue  = device->blk_data.request_queue;
+
+	/* Count number of requests on ccw queue. */
+	nr_queued = 0;
+	list_for_each(l, &device->req_queue)
+		nr_queued++;
+	spin_unlock(get_ccwdev_lock(device->cdev));
+
+	spin_lock(&device->blk_data.request_queue_lock);
+	while (
+		!blk_queue_plugged(queue) &&
+		elv_next_request(queue)   &&
+		nr_queued < TAPEBLOCK_MIN_REQUEUE
+	) {
+		req = elv_next_request(queue);
+		if (rq_data_dir(req) == WRITE) {
+			DBF_EVENT(1, "TBLOCK: Rejecting write request\n");
+			blkdev_dequeue_request(req);
+			tapeblock_end_request(req, 0);
+			continue;
+		}
+		spin_unlock_irq(&device->blk_data.request_queue_lock);
+		rc = tapeblock_start_request(device, req);
+		spin_lock_irq(&device->blk_data.request_queue_lock);
+		blkdev_dequeue_request(req);
+		nr_queued++;
+	}
+	spin_unlock_irq(&device->blk_data.request_queue_lock);
+	atomic_set(&device->blk_data.requeue_scheduled, 0);
+}
+
+/*
+ * Tape request queue function. Called from ll_rw_blk.c
+ */
+static void
+tapeblock_request_fn(request_queue_t *queue)
+{
+	struct tape_device *device;
+
+	device = (struct tape_device *) queue->queuedata;
+	DBF_LH(6, "tapeblock_request_fn(device=%p)\n", device);
+	if (device == NULL)
+		BUG();
+
+	tapeblock_trigger_requeue(device);
+}
+
+/*
+ * This function is called for every new tapedevice
+ */
+int
+tapeblock_setup_device(struct tape_device * device)
+{
+	struct tape_blk_data *	blkdat;
+	struct gendisk *	disk;
+	int			rc;
+
+	blkdat = &device->blk_data;
+	spin_lock_init(&blkdat->request_queue_lock);
+	atomic_set(&blkdat->requeue_scheduled, 0);
+
+	blkdat->request_queue = blk_init_queue(
+		tapeblock_request_fn,
+		&blkdat->request_queue_lock
+	);
+	if (!blkdat->request_queue)
+		return -ENOMEM;
+
+	elevator_exit(blkdat->request_queue->elevator);
+	rc = elevator_init(blkdat->request_queue, "noop");
+	if (rc)
+		goto cleanup_queue;
+
+	blk_queue_hardsect_size(blkdat->request_queue, TAPEBLOCK_HSEC_SIZE);
+	blk_queue_max_sectors(blkdat->request_queue, TAPEBLOCK_MAX_SEC);
+	blk_queue_max_phys_segments(blkdat->request_queue, -1L);
+	blk_queue_max_hw_segments(blkdat->request_queue, -1L);
+	blk_queue_max_segment_size(blkdat->request_queue, -1L);
+	blk_queue_segment_boundary(blkdat->request_queue, -1L);
+
+	disk = alloc_disk(1);
+	if (!disk) {
+		rc = -ENOMEM;
+		goto cleanup_queue;
+	}
+
+	disk->major = tapeblock_major;
+	disk->first_minor = device->first_minor;
+	disk->fops = &tapeblock_fops;
+	disk->private_data = tape_get_device_reference(device);
+	disk->queue = blkdat->request_queue;
+	set_capacity(disk, 0);
+	sprintf(disk->disk_name, "btibm%d",
+		device->first_minor / TAPE_MINORS_PER_DEV);
+
+	blkdat->disk = disk;
+	blkdat->medium_changed = 1;
+	blkdat->request_queue->queuedata = tape_get_device_reference(device);
+
+	add_disk(disk);
+
+	INIT_WORK(&blkdat->requeue_task, tapeblock_requeue,
+		tape_get_device_reference(device));
+
+	return 0;
+
+cleanup_queue:
+	blk_cleanup_queue(blkdat->request_queue);
+	blkdat->request_queue = NULL;
+
+	return rc;
+}
+
+void
+tapeblock_cleanup_device(struct tape_device *device)
+{
+	flush_scheduled_work();
+	device->blk_data.requeue_task.data = tape_put_device(device);
+
+	if (!device->blk_data.disk) {
+		PRINT_ERR("(%s): No gendisk to clean up!\n",
+			device->cdev->dev.bus_id);
+		goto cleanup_queue;
+	}
+
+	del_gendisk(device->blk_data.disk);
+	device->blk_data.disk->private_data =
+		tape_put_device(device->blk_data.disk->private_data);
+	put_disk(device->blk_data.disk);
+
+	device->blk_data.disk = NULL;
+cleanup_queue:
+	device->blk_data.request_queue->queuedata = tape_put_device(device);
+
+	blk_cleanup_queue(device->blk_data.request_queue);
+	device->blk_data.request_queue = NULL;
+}
+
+/*
+ * Detect number of blocks of the tape.
+ * FIXME: can we extent this to detect the blocks size as well ?
+ */
+static int
+tapeblock_revalidate_disk(struct gendisk *disk)
+{
+	struct tape_device *	device;
+	unsigned int		nr_of_blks;
+	int			rc;
+
+	device = (struct tape_device *) disk->private_data;
+	if (!device)
+		BUG();
+
+	if (!device->blk_data.medium_changed)
+		return 0;
+
+	PRINT_INFO("Detecting media size...\n");
+	rc = tape_mtop(device, MTFSFM, 1);
+	if (rc)
+		return rc;
+
+	rc = tape_mtop(device, MTTELL, 1);
+	if (rc < 0)
+		return rc;
+
+	DBF_LH(3, "Image file ends at %d\n", rc);
+	nr_of_blks = rc;
+
+	/* This will fail for the first file. Catch the error by checking the
+	 * position. */
+	tape_mtop(device, MTBSF, 1);
+
+	rc = tape_mtop(device, MTTELL, 1);
+	if (rc < 0)
+		return rc;
+
+	if (rc > nr_of_blks)
+		return -EINVAL;
+
+	DBF_LH(3, "Image file starts at %d\n", rc);
+	device->bof = rc;
+	nr_of_blks -= rc;
+
+	PRINT_INFO("Found %i blocks on media\n", nr_of_blks);
+	set_capacity(device->blk_data.disk,
+		nr_of_blks*(TAPEBLOCK_HSEC_SIZE/512));
+
+	device->blk_data.block_position = 0;
+	device->blk_data.medium_changed = 0;
+	return 0;
+}
+
+static int
+tapeblock_medium_changed(struct gendisk *disk)
+{
+	struct tape_device *device;
+
+	device = (struct tape_device *) disk->private_data;
+	DBF_LH(6, "tapeblock_medium_changed(%p) = %d\n",
+		device, device->blk_data.medium_changed);
+
+	return device->blk_data.medium_changed;
+}
+
+/*
+ * Block frontend tape device open function.
+ */
+static int
+tapeblock_open(struct inode *inode, struct file *filp)
+{
+	struct gendisk *	disk;
+	struct tape_device *	device;
+	int			rc;
+
+	disk   = inode->i_bdev->bd_disk;
+	device = tape_get_device_reference(disk->private_data);
+
+	if (device->required_tapemarks) {
+		DBF_EVENT(2, "TBLOCK: missing tapemarks\n");
+		PRINT_ERR("TBLOCK: Refusing to open tape with missing"
+			" end of file marks.\n");
+		rc = -EPERM;
+		goto put_device;
+	}
+
+	rc = tape_open(device);
+	if (rc)
+		goto put_device;
+
+	rc = tapeblock_revalidate_disk(disk);
+	if (rc)
+		goto release;
+
+	/*
+	 * Note: The reference to <device> is hold until the release function
+	 *       is called.
+	 */
+	tape_state_set(device, TS_BLKUSE);
+	return 0;
+
+release:
+	tape_release(device);
+ put_device:
+	tape_put_device(device);
+	return rc;
+}
+
+/*
+ * Block frontend tape device release function.
+ *
+ * Note: One reference to the tape device was made by the open function. So
+ *       we just get the pointer here and release the reference.
+ */
+static int
+tapeblock_release(struct inode *inode, struct file *filp)
+{
+	struct gendisk *disk = inode->i_bdev->bd_disk;
+	struct tape_device *device = disk->private_data;
+
+	tape_state_set(device, TS_IN_USE);
+	tape_release(device);
+	tape_put_device(device);
+
+	return 0;
+}
+
+/*
+ * Support of some generic block device IOCTLs.
+ */
+static int
+tapeblock_ioctl(
+	struct inode *		inode,
+	struct file *		file,
+	unsigned int		command,
+	unsigned long		arg
+) {
+	int rc;
+	int minor;
+	struct gendisk *disk = inode->i_bdev->bd_disk;
+	struct tape_device *device = disk->private_data;
+
+	rc     = 0;
+	disk   = inode->i_bdev->bd_disk;
+	if (!disk)
+		BUG();
+	device = disk->private_data;
+	if (!device)
+		BUG();
+	minor  = iminor(inode);
+
+	DBF_LH(6, "tapeblock_ioctl(0x%0x)\n", command);
+	DBF_LH(6, "device = %d:%d\n", tapeblock_major, minor);
+
+	switch (command) {
+		/* Refuse some IOCTL calls without complaining (mount). */
+		case 0x5310:		/* CDROMMULTISESSION */
+			rc = -EINVAL;
+			break;
+		default:
+			PRINT_WARN("invalid ioctl 0x%x\n", command);
+			rc = -EINVAL;
+	}
+
+	return rc;
+}
+
+/*
+ * Initialize block device frontend.
+ */
+int
+tapeblock_init(void)
+{
+	int rc;
+
+	/* Register the tape major number to the kernel */
+	rc = register_blkdev(tapeblock_major, "tBLK");
+	if (rc < 0)
+		return rc;
+
+	if (tapeblock_major == 0)
+		tapeblock_major = rc;
+	PRINT_INFO("tape gets major %d for block device\n", tapeblock_major);
+	return 0;
+}
+
+/*
+ * Deregister major for block device frontend
+ */
+void
+tapeblock_exit(void)
+{
+	unregister_blkdev(tapeblock_major, "tBLK");
+}
diff --git a/drivers/s390/char/tape_char.c b/drivers/s390/char/tape_char.c
new file mode 100644
index 0000000..86262a1
--- /dev/null
+++ b/drivers/s390/char/tape_char.c
@@ -0,0 +1,492 @@
+/*
+ *  drivers/s390/char/tape_char.c
+ *    character device frontend for tape device driver
+ *
+ *  S390 and zSeries version
+ *    Copyright (C) 2001,2002 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *    Author(s): Carsten Otte <cotte@de.ibm.com>
+ *		 Michael Holzheu <holzheu@de.ibm.com>
+ *		 Tuan Ngo-Anh <ngoanh@de.ibm.com>
+ *		 Martin Schwidefsky <schwidefsky@de.ibm.com>
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/proc_fs.h>
+#include <linux/mtio.h>
+
+#include <asm/uaccess.h>
+
+#define TAPE_DBF_AREA	tape_core_dbf
+
+#include "tape.h"
+#include "tape_std.h"
+#include "tape_class.h"
+
+#define PRINTK_HEADER "TAPE_CHAR: "
+
+#define TAPECHAR_MAJOR		0	/* get dynamic major */
+
+/*
+ * file operation structure for tape character frontend
+ */
+static ssize_t tapechar_read(struct file *, char __user *, size_t, loff_t *);
+static ssize_t tapechar_write(struct file *, const char __user *, size_t, loff_t *);
+static int tapechar_open(struct inode *,struct file *);
+static int tapechar_release(struct inode *,struct file *);
+static int tapechar_ioctl(struct inode *, struct file *, unsigned int,
+			  unsigned long);
+
+static struct file_operations tape_fops =
+{
+	.owner = THIS_MODULE,
+	.read = tapechar_read,
+	.write = tapechar_write,
+	.ioctl = tapechar_ioctl,
+	.open = tapechar_open,
+	.release = tapechar_release,
+};
+
+static int tapechar_major = TAPECHAR_MAJOR;
+
+/*
+ * This function is called for every new tapedevice
+ */
+int
+tapechar_setup_device(struct tape_device * device)
+{
+	char	device_name[20];
+
+	sprintf(device_name, "ntibm%i", device->first_minor / 2);
+	device->nt = register_tape_dev(
+		&device->cdev->dev,
+		MKDEV(tapechar_major, device->first_minor),
+		&tape_fops,
+		device_name,
+		"non-rewinding"
+	);
+	device_name[0] = 'r';
+	device->rt = register_tape_dev(
+		&device->cdev->dev,
+		MKDEV(tapechar_major, device->first_minor + 1),
+		&tape_fops,
+		device_name,
+		"rewinding"
+	);
+
+	return 0;
+}
+
+void
+tapechar_cleanup_device(struct tape_device *device)
+{
+	unregister_tape_dev(device->rt);
+	device->rt = NULL;
+	unregister_tape_dev(device->nt);
+	device->nt = NULL;
+}
+
+/*
+ * Terminate write command (we write two TMs and skip backward over last)
+ * This ensures that the tape is always correctly terminated.
+ * When the user writes afterwards a new file, he will overwrite the
+ * second TM and therefore one TM will remain to separate the
+ * two files on the tape...
+ */
+static inline void
+tapechar_terminate_write(struct tape_device *device)
+{
+	if (tape_mtop(device, MTWEOF, 1) == 0 &&
+	    tape_mtop(device, MTWEOF, 1) == 0)
+		tape_mtop(device, MTBSR, 1);
+}
+
+static inline int
+tapechar_check_idalbuffer(struct tape_device *device, size_t block_size)
+{
+	struct idal_buffer *new;
+
+	if (device->char_data.idal_buf != NULL &&
+	    device->char_data.idal_buf->size == block_size)
+		return 0;
+
+	if (block_size > MAX_BLOCKSIZE) {
+		DBF_EVENT(3, "Invalid blocksize (%zd > %d)\n",
+			block_size, MAX_BLOCKSIZE);
+		PRINT_ERR("Invalid blocksize (%zd> %d)\n",
+			block_size, MAX_BLOCKSIZE);
+		return -EINVAL;
+	}
+
+	/* The current idal buffer is not correct. Allocate a new one. */
+	new = idal_buffer_alloc(block_size, 0);
+	if (new == NULL)
+		return -ENOMEM;
+
+	if (device->char_data.idal_buf != NULL)
+		idal_buffer_free(device->char_data.idal_buf);
+
+	device->char_data.idal_buf = new;
+
+	return 0;
+}
+
+/*
+ * Tape device read function
+ */
+ssize_t
+tapechar_read(struct file *filp, char __user *data, size_t count, loff_t *ppos)
+{
+	struct tape_device *device;
+	struct tape_request *request;
+	size_t block_size;
+	int rc;
+
+	DBF_EVENT(6, "TCHAR:read\n");
+	device = (struct tape_device *) filp->private_data;
+
+	/*
+	 * If the tape isn't terminated yet, do it now. And since we then
+	 * are at the end of the tape there wouldn't be anything to read
+	 * anyways. So we return immediatly.
+	 */
+	if(device->required_tapemarks) {
+		return tape_std_terminate_write(device);
+	}
+
+	/* Find out block size to use */
+	if (device->char_data.block_size != 0) {
+		if (count < device->char_data.block_size) {
+			DBF_EVENT(3, "TCHAR:read smaller than block "
+				  "size was requested\n");
+			return -EINVAL;
+		}
+		block_size = device->char_data.block_size;
+	} else {
+		block_size = count;
+	}
+
+	rc = tapechar_check_idalbuffer(device, block_size);
+	if (rc)
+		return rc;
+
+#ifdef CONFIG_S390_TAPE_BLOCK
+	/* Changes position. */
+	device->blk_data.medium_changed = 1;
+#endif
+
+	DBF_EVENT(6, "TCHAR:nbytes: %lx\n", block_size);
+	/* Let the discipline build the ccw chain. */
+	request = device->discipline->read_block(device, block_size);
+	if (IS_ERR(request))
+		return PTR_ERR(request);
+	/* Execute it. */
+	rc = tape_do_io(device, request);
+	if (rc == 0) {
+		rc = block_size - request->rescnt;
+		DBF_EVENT(6, "TCHAR:rbytes:  %x\n", rc);
+		filp->f_pos += rc;
+		/* Copy data from idal buffer to user space. */
+		if (idal_buffer_to_user(device->char_data.idal_buf,
+					data, rc) != 0)
+			rc = -EFAULT;
+	}
+	tape_free_request(request);
+	return rc;
+}
+
+/*
+ * Tape device write function
+ */
+ssize_t
+tapechar_write(struct file *filp, const char __user *data, size_t count, loff_t *ppos)
+{
+	struct tape_device *device;
+	struct tape_request *request;
+	size_t block_size;
+	size_t written;
+	int nblocks;
+	int i, rc;
+
+	DBF_EVENT(6, "TCHAR:write\n");
+	device = (struct tape_device *) filp->private_data;
+	/* Find out block size and number of blocks */
+	if (device->char_data.block_size != 0) {
+		if (count < device->char_data.block_size) {
+			DBF_EVENT(3, "TCHAR:write smaller than block "
+				  "size was requested\n");
+			return -EINVAL;
+		}
+		block_size = device->char_data.block_size;
+		nblocks = count / block_size;
+	} else {
+		block_size = count;
+		nblocks = 1;
+	}
+
+	rc = tapechar_check_idalbuffer(device, block_size);
+	if (rc)
+		return rc;
+
+#ifdef CONFIG_S390_TAPE_BLOCK
+	/* Changes position. */
+	device->blk_data.medium_changed = 1;
+#endif
+
+	DBF_EVENT(6,"TCHAR:nbytes: %lx\n", block_size);
+	DBF_EVENT(6, "TCHAR:nblocks: %x\n", nblocks);
+	/* Let the discipline build the ccw chain. */
+	request = device->discipline->write_block(device, block_size);
+	if (IS_ERR(request))
+		return PTR_ERR(request);
+	rc = 0;
+	written = 0;
+	for (i = 0; i < nblocks; i++) {
+		/* Copy data from user space to idal buffer. */
+		if (idal_buffer_from_user(device->char_data.idal_buf,
+					  data, block_size)) {
+			rc = -EFAULT;
+			break;
+		}
+		rc = tape_do_io(device, request);
+		if (rc)
+			break;
+		DBF_EVENT(6, "TCHAR:wbytes: %lx\n",
+			  block_size - request->rescnt);
+		filp->f_pos += block_size - request->rescnt;
+		written += block_size - request->rescnt;
+		if (request->rescnt != 0)
+			break;
+		data += block_size;
+	}
+	tape_free_request(request);
+	if (rc == -ENOSPC) {
+		/*
+		 * Ok, the device has no more space. It has NOT written
+		 * the block.
+		 */
+		if (device->discipline->process_eov)
+			device->discipline->process_eov(device);
+		if (written > 0)
+			rc = 0;
+
+	}
+
+	/*
+	 * After doing a write we always need two tapemarks to correctly
+	 * terminate the tape (one to terminate the file, the second to
+	 * flag the end of recorded data.
+	 * Since process_eov positions the tape in front of the written
+	 * tapemark it doesn't hurt to write two marks again.
+	 */
+	if (!rc)
+		device->required_tapemarks = 2;
+
+	return rc ? rc : written;
+}
+
+/*
+ * Character frontend tape device open function.
+ */
+int
+tapechar_open (struct inode *inode, struct file *filp)
+{
+	struct tape_device *device;
+	int minor, rc;
+
+	DBF_EVENT(6, "TCHAR:open: %i:%i\n",
+		imajor(filp->f_dentry->d_inode),
+		iminor(filp->f_dentry->d_inode));
+
+	if (imajor(filp->f_dentry->d_inode) != tapechar_major)
+		return -ENODEV;
+
+	minor = iminor(filp->f_dentry->d_inode);
+	device = tape_get_device(minor / TAPE_MINORS_PER_DEV);
+	if (IS_ERR(device)) {
+		DBF_EVENT(3, "TCHAR:open: tape_get_device() failed\n");
+		return PTR_ERR(device);
+	}
+
+
+	rc = tape_open(device);
+	if (rc == 0) {
+		filp->private_data = device;
+		return nonseekable_open(inode, filp);
+	}
+	tape_put_device(device);
+
+	return rc;
+}
+
+/*
+ * Character frontend tape device release function.
+ */
+
+int
+tapechar_release(struct inode *inode, struct file *filp)
+{
+	struct tape_device *device;
+
+	DBF_EVENT(6, "TCHAR:release: %x\n", iminor(inode));
+	device = (struct tape_device *) filp->private_data;
+
+	/*
+	 * If this is the rewinding tape minor then rewind. In that case we
+	 * write all required tapemarks. Otherwise only one to terminate the
+	 * file.
+	 */
+	if ((iminor(inode) & 1) != 0) {
+		if (device->required_tapemarks)
+			tape_std_terminate_write(device);
+		tape_mtop(device, MTREW, 1);
+	} else {
+		if (device->required_tapemarks > 1) {
+			if (tape_mtop(device, MTWEOF, 1) == 0)
+				device->required_tapemarks--;
+		}
+	}
+
+	if (device->char_data.idal_buf != NULL) {
+		idal_buffer_free(device->char_data.idal_buf);
+		device->char_data.idal_buf = NULL;
+	}
+	tape_release(device);
+	filp->private_data = tape_put_device(device);
+
+	return 0;
+}
+
+/*
+ * Tape device io controls.
+ */
+static int
+tapechar_ioctl(struct inode *inp, struct file *filp,
+	       unsigned int no, unsigned long data)
+{
+	struct tape_device *device;
+	int rc;
+
+	DBF_EVENT(6, "TCHAR:ioct\n");
+
+	device = (struct tape_device *) filp->private_data;
+
+	if (no == MTIOCTOP) {
+		struct mtop op;
+
+		if (copy_from_user(&op, (char __user *) data, sizeof(op)) != 0)
+			return -EFAULT;
+		if (op.mt_count < 0)
+			return -EINVAL;
+
+		/*
+		 * Operations that change tape position should write final
+		 * tapemarks.
+		 */
+		switch (op.mt_op) {
+			case MTFSF:
+			case MTBSF:
+			case MTFSR:
+			case MTBSR:
+			case MTREW:
+			case MTOFFL:
+			case MTEOM:
+			case MTRETEN:
+			case MTBSFM:
+			case MTFSFM:
+			case MTSEEK:
+#ifdef CONFIG_S390_TAPE_BLOCK
+				device->blk_data.medium_changed = 1;
+#endif
+				if (device->required_tapemarks)
+					tape_std_terminate_write(device);
+			default:
+				;
+		}
+		rc = tape_mtop(device, op.mt_op, op.mt_count);
+
+		if (op.mt_op == MTWEOF && rc == 0) {
+			if (op.mt_count > device->required_tapemarks)
+				device->required_tapemarks = 0;
+			else
+				device->required_tapemarks -= op.mt_count;
+		}
+		return rc;
+	}
+	if (no == MTIOCPOS) {
+		/* MTIOCPOS: query the tape position. */
+		struct mtpos pos;
+
+		rc = tape_mtop(device, MTTELL, 1);
+		if (rc < 0)
+			return rc;
+		pos.mt_blkno = rc;
+		if (copy_to_user((char __user *) data, &pos, sizeof(pos)) != 0)
+			return -EFAULT;
+		return 0;
+	}
+	if (no == MTIOCGET) {
+		/* MTIOCGET: query the tape drive status. */
+		struct mtget get;
+
+		memset(&get, 0, sizeof(get));
+		get.mt_type = MT_ISUNKNOWN;
+		get.mt_resid = 0 /* device->devstat.rescnt */;
+		get.mt_dsreg = device->tape_state;
+		/* FIXME: mt_gstat, mt_erreg, mt_fileno */
+		get.mt_gstat = 0;
+		get.mt_erreg = 0;
+		get.mt_fileno = 0;
+		get.mt_gstat  = device->tape_generic_status;
+
+		if (device->medium_state == MS_LOADED) {
+			rc = tape_mtop(device, MTTELL, 1);
+
+			if (rc < 0)
+				return rc;
+
+			if (rc == 0)
+				get.mt_gstat |= GMT_BOT(~0);
+
+			get.mt_blkno = rc;
+		}
+
+		if (copy_to_user((char __user *) data, &get, sizeof(get)) != 0)
+			return -EFAULT;
+
+		return 0;
+	}
+	/* Try the discipline ioctl function. */
+	if (device->discipline->ioctl_fn == NULL)
+		return -EINVAL;
+	return device->discipline->ioctl_fn(device, no, data);
+}
+
+/*
+ * Initialize character device frontend.
+ */
+int
+tapechar_init (void)
+{
+	dev_t	dev;
+
+	if (alloc_chrdev_region(&dev, 0, 256, "tape") != 0)
+		return -1;
+
+	tapechar_major = MAJOR(dev);
+	PRINT_INFO("tape gets major %d for character devices\n", MAJOR(dev));
+
+	return 0;
+}
+
+/*
+ * cleanup
+ */
+void
+tapechar_exit(void)
+{
+	PRINT_INFO("tape releases major %d for character devices\n",
+		tapechar_major);
+	unregister_chrdev_region(MKDEV(tapechar_major, 0), 256);
+}
diff --git a/drivers/s390/char/tape_class.c b/drivers/s390/char/tape_class.c
new file mode 100644
index 0000000..0f8ffd4
--- /dev/null
+++ b/drivers/s390/char/tape_class.c
@@ -0,0 +1,126 @@
+/*
+ * (C) Copyright IBM Corp. 2004
+ * tape_class.c ($Revision: 1.8 $)
+ *
+ * Tape class device support
+ *
+ * Author: Stefan Bader <shbader@de.ibm.com>
+ * Based on simple class device code by Greg K-H
+ */
+#include "tape_class.h"
+
+MODULE_AUTHOR("Stefan Bader <shbader@de.ibm.com>");
+MODULE_DESCRIPTION(
+	"(C) Copyright IBM Corp. 2004   All Rights Reserved.\n"
+	"tape_class.c ($Revision: 1.8 $)"
+);
+MODULE_LICENSE("GPL");
+
+struct class_simple *tape_class;
+
+/*
+ * Register a tape device and return a pointer to the cdev structure.
+ *
+ * device
+ *	The pointer to the struct device of the physical (base) device.
+ * drivername
+ *	The pointer to the drivers name for it's character devices.
+ * dev
+ *	The intended major/minor number. The major number may be 0 to
+ *	get a dynamic major number.
+ * fops
+ *	The pointer to the drivers file operations for the tape device.
+ * devname
+ *	The pointer to the name of the character device.
+ */
+struct tape_class_device *register_tape_dev(
+	struct device *		device,
+	dev_t			dev,
+	struct file_operations *fops,
+	char *			device_name,
+	char *			mode_name)
+{
+	struct tape_class_device *	tcd;
+	int		rc;
+	char *		s;
+
+	tcd = kmalloc(sizeof(struct tape_class_device), GFP_KERNEL);
+	if (!tcd)
+		return ERR_PTR(-ENOMEM);
+
+	memset(tcd, 0, sizeof(struct tape_class_device));
+	strncpy(tcd->device_name, device_name, TAPECLASS_NAME_LEN);
+	for (s = strchr(tcd->device_name, '/'); s; s = strchr(s, '/'))
+		*s = '!';
+	strncpy(tcd->mode_name, mode_name, TAPECLASS_NAME_LEN);
+	for (s = strchr(tcd->mode_name, '/'); s; s = strchr(s, '/'))
+		*s = '!';
+
+	tcd->char_device = cdev_alloc();
+	if (!tcd->char_device) {
+		rc = -ENOMEM;
+		goto fail_with_tcd;
+	}
+
+	tcd->char_device->owner = fops->owner;
+	tcd->char_device->ops   = fops;
+	tcd->char_device->dev   = dev;
+
+	rc = cdev_add(tcd->char_device, tcd->char_device->dev, 1);
+	if (rc)
+		goto fail_with_cdev;
+
+	tcd->class_device = class_simple_device_add(
+				tape_class,
+				tcd->char_device->dev,
+				device,
+				"%s", tcd->device_name
+			);
+	sysfs_create_link(
+		&device->kobj,
+		&tcd->class_device->kobj,
+		tcd->mode_name
+	);
+
+	return tcd;
+
+fail_with_cdev:
+	cdev_del(tcd->char_device);
+
+fail_with_tcd:
+	kfree(tcd);
+
+	return ERR_PTR(rc);
+}
+EXPORT_SYMBOL(register_tape_dev);
+
+void unregister_tape_dev(struct tape_class_device *tcd)
+{
+	if (tcd != NULL && !IS_ERR(tcd)) {
+		sysfs_remove_link(
+			&tcd->class_device->dev->kobj,
+			tcd->mode_name
+		);
+		class_simple_device_remove(tcd->char_device->dev);
+		cdev_del(tcd->char_device);
+		kfree(tcd);
+	}
+}
+EXPORT_SYMBOL(unregister_tape_dev);
+
+
+static int __init tape_init(void)
+{
+	tape_class = class_simple_create(THIS_MODULE, "tape390");
+
+	return 0;
+}
+
+static void __exit tape_exit(void)
+{
+	class_simple_destroy(tape_class);
+	tape_class = NULL;
+}
+
+postcore_initcall(tape_init);
+module_exit(tape_exit);
diff --git a/drivers/s390/char/tape_class.h b/drivers/s390/char/tape_class.h
new file mode 100644
index 0000000..33133ad
--- /dev/null
+++ b/drivers/s390/char/tape_class.h
@@ -0,0 +1,61 @@
+/*
+ * (C) Copyright IBM Corp. 2004   All Rights Reserved.
+ * tape_class.h ($Revision: 1.4 $)
+ *
+ * Tape class device support
+ *
+ * Author: Stefan Bader <shbader@de.ibm.com>
+ * Based on simple class device code by Greg K-H
+ */
+#ifndef __TAPE_CLASS_H__
+#define __TAPE_CLASS_H__
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/fs.h>
+#include <linux/major.h>
+#include <linux/kobject.h>
+#include <linux/kobj_map.h>
+#include <linux/cdev.h>
+
+#include <linux/device.h>
+#include <linux/kdev_t.h>
+
+#define TAPECLASS_NAME_LEN	32
+
+struct tape_class_device {
+	struct cdev *		char_device;
+	struct class_device *	class_device;
+	char			device_name[TAPECLASS_NAME_LEN];
+	char			mode_name[TAPECLASS_NAME_LEN];
+};
+
+/*
+ * Register a tape device and return a pointer to the tape class device
+ * created by the call.
+ *
+ * device
+ *	The pointer to the struct device of the physical (base) device.
+ * dev
+ *	The intended major/minor number. The major number may be 0 to
+ *	get a dynamic major number.
+ * fops
+ *	The pointer to the drivers file operations for the tape device.
+ * device_name
+ *	Pointer to the logical device name (will also be used as kobject name
+ *	of the cdev). This can also be called the name of the tape class
+ *	device.
+ * mode_name
+ *	Points to the name of the tape mode. This creates a link with that
+ *	name from the physical device to the logical device (class).
+ */
+struct tape_class_device *register_tape_dev(
+	struct device *		device,
+	dev_t			dev,
+	struct file_operations *fops,
+	char *			device_name,
+	char *			node_name
+);
+void unregister_tape_dev(struct tape_class_device *tcd);
+
+#endif /* __TAPE_CLASS_H__ */
diff --git a/drivers/s390/char/tape_core.c b/drivers/s390/char/tape_core.c
new file mode 100644
index 0000000..e51046a
--- /dev/null
+++ b/drivers/s390/char/tape_core.c
@@ -0,0 +1,1242 @@
+/*
+ *  drivers/s390/char/tape_core.c
+ *    basic function of the tape device driver
+ *
+ *  S390 and zSeries version
+ *    Copyright (C) 2001,2002 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *    Author(s): Carsten Otte <cotte@de.ibm.com>
+ *		 Michael Holzheu <holzheu@de.ibm.com>
+ *		 Tuan Ngo-Anh <ngoanh@de.ibm.com>
+ *		 Martin Schwidefsky <schwidefsky@de.ibm.com>
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/init.h>	     // for kernel parameters
+#include <linux/kmod.h>	     // for requesting modules
+#include <linux/spinlock.h>  // for locks
+#include <linux/vmalloc.h>
+#include <linux/list.h>
+
+#include <asm/types.h>	     // for variable types
+
+#define TAPE_DBF_AREA	tape_core_dbf
+
+#include "tape.h"
+#include "tape_std.h"
+
+#define PRINTK_HEADER "TAPE_CORE: "
+
+static void __tape_do_irq (struct ccw_device *, unsigned long, struct irb *);
+static void __tape_remove_request(struct tape_device *, struct tape_request *);
+
+/*
+ * One list to contain all tape devices of all disciplines, so
+ * we can assign the devices to minor numbers of the same major
+ * The list is protected by the rwlock
+ */
+static struct list_head tape_device_list = LIST_HEAD_INIT(tape_device_list);
+static DEFINE_RWLOCK(tape_device_lock);
+
+/*
+ * Pointer to debug area.
+ */
+debug_info_t *TAPE_DBF_AREA = NULL;
+EXPORT_SYMBOL(TAPE_DBF_AREA);
+
+/*
+ * Printable strings for tape enumerations.
+ */
+const char *tape_state_verbose[TS_SIZE] =
+{
+	[TS_UNUSED]   = "UNUSED",
+	[TS_IN_USE]   = "IN_USE",
+	[TS_BLKUSE]   = "BLKUSE",
+	[TS_INIT]     = "INIT  ",
+	[TS_NOT_OPER] = "NOT_OP"
+};
+
+const char *tape_op_verbose[TO_SIZE] =
+{
+	[TO_BLOCK] = "BLK",	[TO_BSB] = "BSB",
+	[TO_BSF] = "BSF",	[TO_DSE] = "DSE",
+	[TO_FSB] = "FSB",	[TO_FSF] = "FSF",
+	[TO_LBL] = "LBL",	[TO_NOP] = "NOP",
+	[TO_RBA] = "RBA",	[TO_RBI] = "RBI",
+	[TO_RFO] = "RFO",	[TO_REW] = "REW",
+	[TO_RUN] = "RUN",	[TO_WRI] = "WRI",
+	[TO_WTM] = "WTM",	[TO_MSEN] = "MSN",
+	[TO_LOAD] = "LOA",	[TO_READ_CONFIG] = "RCF",
+	[TO_READ_ATTMSG] = "RAT",
+	[TO_DIS] = "DIS",	[TO_ASSIGN] = "ASS",
+	[TO_UNASSIGN] = "UAS"
+};
+
+static inline int
+busid_to_int(char *bus_id)
+{
+	int	dec;
+	int	d;
+	char *	s;
+
+	for(s = bus_id, d = 0; *s != '\0' && *s != '.'; s++)
+		d = (d * 10) + (*s - '0');
+	dec = d;
+	for(s++, d = 0; *s != '\0' && *s != '.'; s++)
+		d = (d * 10) + (*s - '0');
+	dec = (dec << 8) + d;
+
+	for(s++; *s != '\0'; s++) {
+		if (*s >= '0' && *s <= '9') {
+			d = *s - '0';
+		} else if (*s >= 'a' && *s <= 'f') {
+			d = *s - 'a' + 10;
+		} else {
+			d = *s - 'A' + 10;
+		}
+		dec = (dec << 4) + d;
+	}
+
+	return dec;
+}
+
+/*
+ * Some channel attached tape specific attributes.
+ *
+ * FIXME: In the future the first_minor and blocksize attribute should be
+ *        replaced by a link to the cdev tree.
+ */
+static ssize_t
+tape_medium_state_show(struct device *dev, char *buf)
+{
+	struct tape_device *tdev;
+
+	tdev = (struct tape_device *) dev->driver_data;
+	return scnprintf(buf, PAGE_SIZE, "%i\n", tdev->medium_state);
+}
+
+static
+DEVICE_ATTR(medium_state, 0444, tape_medium_state_show, NULL);
+
+static ssize_t
+tape_first_minor_show(struct device *dev, char *buf)
+{
+	struct tape_device *tdev;
+
+	tdev = (struct tape_device *) dev->driver_data;
+	return scnprintf(buf, PAGE_SIZE, "%i\n", tdev->first_minor);
+}
+
+static
+DEVICE_ATTR(first_minor, 0444, tape_first_minor_show, NULL);
+
+static ssize_t
+tape_state_show(struct device *dev, char *buf)
+{
+	struct tape_device *tdev;
+
+	tdev = (struct tape_device *) dev->driver_data;
+	return scnprintf(buf, PAGE_SIZE, "%s\n", (tdev->first_minor < 0) ?
+		"OFFLINE" : tape_state_verbose[tdev->tape_state]);
+}
+
+static
+DEVICE_ATTR(state, 0444, tape_state_show, NULL);
+
+static ssize_t
+tape_operation_show(struct device *dev, char *buf)
+{
+	struct tape_device *tdev;
+	ssize_t rc;
+
+	tdev = (struct tape_device *) dev->driver_data;
+	if (tdev->first_minor < 0)
+		return scnprintf(buf, PAGE_SIZE, "N/A\n");
+
+	spin_lock_irq(get_ccwdev_lock(tdev->cdev));
+	if (list_empty(&tdev->req_queue))
+		rc = scnprintf(buf, PAGE_SIZE, "---\n");
+	else {
+		struct tape_request *req;
+
+		req = list_entry(tdev->req_queue.next, struct tape_request,
+			list);
+		rc = scnprintf(buf,PAGE_SIZE, "%s\n", tape_op_verbose[req->op]);
+	}
+	spin_unlock_irq(get_ccwdev_lock(tdev->cdev));
+	return rc;
+}
+
+static
+DEVICE_ATTR(operation, 0444, tape_operation_show, NULL);
+
+static ssize_t
+tape_blocksize_show(struct device *dev, char *buf)
+{
+	struct tape_device *tdev;
+
+	tdev = (struct tape_device *) dev->driver_data;
+
+	return scnprintf(buf, PAGE_SIZE, "%i\n", tdev->char_data.block_size);
+}
+
+static
+DEVICE_ATTR(blocksize, 0444, tape_blocksize_show, NULL);
+
+static struct attribute *tape_attrs[] = {
+	&dev_attr_medium_state.attr,
+	&dev_attr_first_minor.attr,
+	&dev_attr_state.attr,
+	&dev_attr_operation.attr,
+	&dev_attr_blocksize.attr,
+	NULL
+};
+
+static struct attribute_group tape_attr_group = {
+	.attrs = tape_attrs,
+};
+
+/*
+ * Tape state functions
+ */
+void
+tape_state_set(struct tape_device *device, enum tape_state newstate)
+{
+	const char *str;
+
+	if (device->tape_state == TS_NOT_OPER) {
+		DBF_EVENT(3, "ts_set err: not oper\n");
+		return;
+	}
+	DBF_EVENT(4, "ts. dev:	%x\n", device->first_minor);
+	if (device->tape_state < TO_SIZE && device->tape_state >= 0)
+		str = tape_state_verbose[device->tape_state];
+	else
+		str = "UNKNOWN TS";
+	DBF_EVENT(4, "old ts:	%s\n", str);
+	if (device->tape_state < TO_SIZE && device->tape_state >=0 )
+		str = tape_state_verbose[device->tape_state];
+	else
+		str = "UNKNOWN TS";
+	DBF_EVENT(4, "%s\n", str);
+	DBF_EVENT(4, "new ts:\t\n");
+	if (newstate < TO_SIZE && newstate >= 0)
+		str = tape_state_verbose[newstate];
+	else
+		str = "UNKNOWN TS";
+	DBF_EVENT(4, "%s\n", str);
+	device->tape_state = newstate;
+	wake_up(&device->state_change_wq);
+}
+
+void
+tape_med_state_set(struct tape_device *device, enum tape_medium_state newstate)
+{
+	if (device->medium_state == newstate)
+		return;
+	switch(newstate){
+	case MS_UNLOADED:
+		device->tape_generic_status |= GMT_DR_OPEN(~0);
+		PRINT_INFO("(%s): Tape is unloaded\n",
+			   device->cdev->dev.bus_id);
+		break;
+	case MS_LOADED:
+		device->tape_generic_status &= ~GMT_DR_OPEN(~0);
+		PRINT_INFO("(%s): Tape has been mounted\n",
+			   device->cdev->dev.bus_id);
+		break;
+	default:
+		// print nothing
+		break;
+	}
+	device->medium_state = newstate;
+	wake_up(&device->state_change_wq);
+}
+
+/*
+ * Stop running ccw. Has to be called with the device lock held.
+ */
+static inline int
+__tape_halt_io(struct tape_device *device, struct tape_request *request)
+{
+	int retries;
+	int rc;
+
+	/* Check if interrupt has already been processed */
+	if (request->callback == NULL)
+		return 0;
+
+	rc = 0;
+	for (retries = 0; retries < 5; retries++) {
+		rc = ccw_device_clear(device->cdev, (long) request);
+
+		if (rc == 0) {                     /* Termination successful */
+			request->rc     = -EIO;
+			request->status = TAPE_REQUEST_DONE;
+			return 0;
+		}
+
+		if (rc == -ENODEV)
+			DBF_EXCEPTION(2, "device gone, retry\n");
+		else if (rc == -EIO)
+			DBF_EXCEPTION(2, "I/O error, retry\n");
+		else if (rc == -EBUSY)
+			DBF_EXCEPTION(2, "device busy, retry late\n");
+		else
+			BUG();
+	}
+
+	return rc;
+}
+
+/*
+ * Add device into the sorted list, giving it the first
+ * available minor number.
+ */
+static int
+tape_assign_minor(struct tape_device *device)
+{
+	struct tape_device *tmp;
+	int minor;
+
+	minor = 0;
+	write_lock(&tape_device_lock);
+	list_for_each_entry(tmp, &tape_device_list, node) {
+		if (minor < tmp->first_minor)
+			break;
+		minor += TAPE_MINORS_PER_DEV;
+	}
+	if (minor >= 256) {
+		write_unlock(&tape_device_lock);
+		return -ENODEV;
+	}
+	device->first_minor = minor;
+	list_add_tail(&device->node, &tmp->node);
+	write_unlock(&tape_device_lock);
+	return 0;
+}
+
+/* remove device from the list */
+static void
+tape_remove_minor(struct tape_device *device)
+{
+	write_lock(&tape_device_lock);
+	list_del_init(&device->node);
+	device->first_minor = -1;
+	write_unlock(&tape_device_lock);
+}
+
+/*
+ * Set a device online.
+ *
+ * This function is called by the common I/O layer to move a device from the
+ * detected but offline into the online state.
+ * If we return an error (RC < 0) the device remains in the offline state. This
+ * can happen if the device is assigned somewhere else, for example.
+ */
+int
+tape_generic_online(struct tape_device *device,
+		   struct tape_discipline *discipline)
+{
+	int rc;
+
+	DBF_LH(6, "tape_enable_device(%p, %p)\n", device, discipline);
+
+	if (device->tape_state != TS_INIT) {
+		DBF_LH(3, "Tapestate not INIT (%d)\n", device->tape_state);
+		return -EINVAL;
+	}
+
+	/* Let the discipline have a go at the device. */
+	device->discipline = discipline;
+	if (!try_module_get(discipline->owner)) {
+		PRINT_ERR("Cannot get module. Module gone.\n");
+		return -EINVAL;
+	}
+
+	rc = discipline->setup_device(device);
+	if (rc)
+		goto out;
+	rc = tape_assign_minor(device);
+	if (rc)
+		goto out_discipline;
+
+	rc = tapechar_setup_device(device);
+	if (rc)
+		goto out_minor;
+	rc = tapeblock_setup_device(device);
+	if (rc)
+		goto out_char;
+
+	tape_state_set(device, TS_UNUSED);
+
+	DBF_LH(3, "(%08x): Drive set online\n", device->cdev_id);
+
+	return 0;
+
+out_char:
+	tapechar_cleanup_device(device);
+out_discipline:
+	device->discipline->cleanup_device(device);
+	device->discipline = NULL;
+out_minor:
+	tape_remove_minor(device);
+out:
+	module_put(discipline->owner);
+	return rc;
+}
+
+static inline void
+tape_cleanup_device(struct tape_device *device)
+{
+	tapeblock_cleanup_device(device);
+	tapechar_cleanup_device(device);
+	device->discipline->cleanup_device(device);
+	module_put(device->discipline->owner);
+	tape_remove_minor(device);
+	tape_med_state_set(device, MS_UNKNOWN);
+}
+
+/*
+ * Set device offline.
+ *
+ * Called by the common I/O layer if the drive should set offline on user
+ * request. We may prevent this by returning an error.
+ * Manual offline is only allowed while the drive is not in use.
+ */
+int
+tape_generic_offline(struct tape_device *device)
+{
+	if (!device) {
+		PRINT_ERR("tape_generic_offline: no such device\n");
+		return -ENODEV;
+	}
+
+	DBF_LH(3, "(%08x): tape_generic_offline(%p)\n",
+		device->cdev_id, device);
+
+	spin_lock_irq(get_ccwdev_lock(device->cdev));
+	switch (device->tape_state) {
+		case TS_INIT:
+		case TS_NOT_OPER:
+			spin_unlock_irq(get_ccwdev_lock(device->cdev));
+			break;
+		case TS_UNUSED:
+			tape_state_set(device, TS_INIT);
+			spin_unlock_irq(get_ccwdev_lock(device->cdev));
+			tape_cleanup_device(device);
+			break;
+		default:
+			DBF_EVENT(3, "(%08x): Set offline failed "
+				"- drive in use.\n",
+				device->cdev_id);
+			PRINT_WARN("(%s): Set offline failed "
+				"- drive in use.\n",
+				device->cdev->dev.bus_id);
+			spin_unlock_irq(get_ccwdev_lock(device->cdev));
+			return -EBUSY;
+	}
+
+	DBF_LH(3, "(%08x): Drive set offline.\n", device->cdev_id);
+	return 0;
+}
+
+/*
+ * Allocate memory for a new device structure.
+ */
+static struct tape_device *
+tape_alloc_device(void)
+{
+	struct tape_device *device;
+
+	device = (struct tape_device *)
+		kmalloc(sizeof(struct tape_device), GFP_KERNEL);
+	if (device == NULL) {
+		DBF_EXCEPTION(2, "ti:no mem\n");
+		PRINT_INFO ("can't allocate memory for "
+			    "tape info structure\n");
+		return ERR_PTR(-ENOMEM);
+	}
+	memset(device, 0, sizeof(struct tape_device));
+	device->modeset_byte = (char *) kmalloc(1, GFP_KERNEL | GFP_DMA);
+	if (device->modeset_byte == NULL) {
+		DBF_EXCEPTION(2, "ti:no mem\n");
+		PRINT_INFO("can't allocate memory for modeset byte\n");
+		kfree(device);
+		return ERR_PTR(-ENOMEM);
+	}
+	INIT_LIST_HEAD(&device->req_queue);
+	INIT_LIST_HEAD(&device->node);
+	init_waitqueue_head(&device->state_change_wq);
+	device->tape_state = TS_INIT;
+	device->medium_state = MS_UNKNOWN;
+	*device->modeset_byte = 0;
+	device->first_minor = -1;
+	atomic_set(&device->ref_count, 1);
+
+	return device;
+}
+
+/*
+ * Get a reference to an existing device structure. This will automatically
+ * increment the reference count.
+ */
+struct tape_device *
+tape_get_device_reference(struct tape_device *device)
+{
+	DBF_EVENT(4, "tape_get_device_reference(%p) = %i\n", device,
+		atomic_inc_return(&device->ref_count));
+
+	return device;
+}
+
+/*
+ * Decrease the reference counter of a devices structure. If the
+ * reference counter reaches zero free the device structure.
+ * The function returns a NULL pointer to be used by the caller
+ * for clearing reference pointers.
+ */
+struct tape_device *
+tape_put_device(struct tape_device *device)
+{
+	int remain;
+
+	remain = atomic_dec_return(&device->ref_count);
+	if (remain > 0) {
+		DBF_EVENT(4, "tape_put_device(%p) -> %i\n", device, remain);
+	} else {
+		if (remain < 0) {
+			DBF_EVENT(4, "put device without reference\n");
+			PRINT_ERR("put device without reference\n");
+		} else {
+			DBF_EVENT(4, "tape_free_device(%p)\n", device);
+			kfree(device->modeset_byte);
+			kfree(device);
+		}
+	}
+
+	return NULL;			
+}
+
+/*
+ * Find tape device by a device index.
+ */
+struct tape_device *
+tape_get_device(int devindex)
+{
+	struct tape_device *device, *tmp;
+
+	device = ERR_PTR(-ENODEV);
+	read_lock(&tape_device_lock);
+	list_for_each_entry(tmp, &tape_device_list, node) {
+		if (tmp->first_minor / TAPE_MINORS_PER_DEV == devindex) {
+			device = tape_get_device_reference(tmp);
+			break;
+		}
+	}
+	read_unlock(&tape_device_lock);
+	return device;
+}
+
+/*
+ * Driverfs tape probe function.
+ */
+int
+tape_generic_probe(struct ccw_device *cdev)
+{
+	struct tape_device *device;
+
+	device = tape_alloc_device();
+	if (IS_ERR(device))
+		return -ENODEV;
+	PRINT_INFO("tape device %s found\n", cdev->dev.bus_id);
+	cdev->dev.driver_data = device;
+	device->cdev = cdev;
+	device->cdev_id = busid_to_int(cdev->dev.bus_id);
+	cdev->handler = __tape_do_irq;
+
+	ccw_device_set_options(cdev, CCWDEV_DO_PATHGROUP);
+	sysfs_create_group(&cdev->dev.kobj, &tape_attr_group);
+
+	return 0;
+}
+
+static inline void
+__tape_discard_requests(struct tape_device *device)
+{
+	struct tape_request *	request;
+	struct list_head *	l, *n;
+
+	list_for_each_safe(l, n, &device->req_queue) {
+		request = list_entry(l, struct tape_request, list);
+		if (request->status == TAPE_REQUEST_IN_IO)
+			request->status = TAPE_REQUEST_DONE;
+		list_del(&request->list);
+
+		/* Decrease ref_count for removed request. */
+		request->device = tape_put_device(device);
+		request->rc = -EIO;
+		if (request->callback != NULL)
+			request->callback(request, request->callback_data);
+	}
+}
+
+/*
+ * Driverfs tape remove function.
+ *
+ * This function is called whenever the common I/O layer detects the device
+ * gone. This can happen at any time and we cannot refuse.
+ */
+void
+tape_generic_remove(struct ccw_device *cdev)
+{
+	struct tape_device *	device;
+
+	device = cdev->dev.driver_data;
+	if (!device) {
+		PRINT_ERR("No device pointer in tape_generic_remove!\n");
+		return;
+	}
+	DBF_LH(3, "(%08x): tape_generic_remove(%p)\n", device->cdev_id, cdev);
+
+	spin_lock_irq(get_ccwdev_lock(device->cdev));
+	switch (device->tape_state) {
+		case TS_INIT:
+			tape_state_set(device, TS_NOT_OPER);
+		case TS_NOT_OPER:
+			/*
+			 * Nothing to do.
+			 */
+			spin_unlock_irq(get_ccwdev_lock(device->cdev));
+			break;
+		case TS_UNUSED:
+			/*
+			 * Need only to release the device.
+			 */
+			tape_state_set(device, TS_NOT_OPER);
+			spin_unlock_irq(get_ccwdev_lock(device->cdev));
+			tape_cleanup_device(device);
+			break;
+		default:
+			/*
+			 * There may be requests on the queue. We will not get
+			 * an interrupt for a request that was running. So we
+			 * just post them all as I/O errors.
+			 */
+			DBF_EVENT(3, "(%08x): Drive in use vanished!\n",
+				device->cdev_id);
+			PRINT_WARN("(%s): Drive in use vanished - "
+				"expect trouble!\n",
+				device->cdev->dev.bus_id);
+			PRINT_WARN("State was %i\n", device->tape_state);
+			tape_state_set(device, TS_NOT_OPER);
+			__tape_discard_requests(device);
+			spin_unlock_irq(get_ccwdev_lock(device->cdev));
+			tape_cleanup_device(device);
+	}
+
+	if (cdev->dev.driver_data != NULL) {
+		sysfs_remove_group(&cdev->dev.kobj, &tape_attr_group);
+		cdev->dev.driver_data = tape_put_device(cdev->dev.driver_data);
+	}
+}
+
+/*
+ * Allocate a new tape ccw request
+ */
+struct tape_request *
+tape_alloc_request(int cplength, int datasize)
+{
+	struct tape_request *request;
+
+	if (datasize > PAGE_SIZE || (cplength*sizeof(struct ccw1)) > PAGE_SIZE)
+		BUG();
+
+	DBF_LH(6, "tape_alloc_request(%d, %d)\n", cplength, datasize);
+
+	request = (struct tape_request *) kmalloc(sizeof(struct tape_request),
+						  GFP_KERNEL);
+	if (request == NULL) {
+		DBF_EXCEPTION(1, "cqra nomem\n");
+		return ERR_PTR(-ENOMEM);
+	}
+	memset(request, 0, sizeof(struct tape_request));
+	/* allocate channel program */
+	if (cplength > 0) {
+		request->cpaddr = kmalloc(cplength*sizeof(struct ccw1),
+					  GFP_ATOMIC | GFP_DMA);
+		if (request->cpaddr == NULL) {
+			DBF_EXCEPTION(1, "cqra nomem\n");
+			kfree(request);
+			return ERR_PTR(-ENOMEM);
+		}
+		memset(request->cpaddr, 0, cplength*sizeof(struct ccw1));
+	}
+	/* alloc small kernel buffer */
+	if (datasize > 0) {
+		request->cpdata = kmalloc(datasize, GFP_KERNEL | GFP_DMA);
+		if (request->cpdata == NULL) {
+			DBF_EXCEPTION(1, "cqra nomem\n");
+			if (request->cpaddr != NULL)
+				kfree(request->cpaddr);
+			kfree(request);
+			return ERR_PTR(-ENOMEM);
+		}
+		memset(request->cpdata, 0, datasize);
+	}
+	DBF_LH(6, "New request %p(%p/%p)\n", request, request->cpaddr,
+		request->cpdata);
+
+	return request;
+}
+
+/*
+ * Free tape ccw request
+ */
+void
+tape_free_request (struct tape_request * request)
+{
+	DBF_LH(6, "Free request %p\n", request);
+
+	if (request->device != NULL) {
+		request->device = tape_put_device(request->device);
+	}
+	if (request->cpdata != NULL)
+		kfree(request->cpdata);
+	if (request->cpaddr != NULL)
+		kfree(request->cpaddr);
+	kfree(request);
+}
+
+static inline void
+__tape_do_io_list(struct tape_device *device)
+{
+	struct list_head *l, *n;
+	struct tape_request *request;
+	int rc;
+
+	DBF_LH(6, "__tape_do_io_list(%p)\n", device);
+	/*
+	 * Try to start each request on request queue until one is
+	 * started successful.
+	 */
+	list_for_each_safe(l, n, &device->req_queue) {
+		request = list_entry(l, struct tape_request, list);
+#ifdef CONFIG_S390_TAPE_BLOCK
+		if (request->op == TO_BLOCK)
+			device->discipline->check_locate(device, request);
+#endif
+		rc = ccw_device_start(device->cdev, request->cpaddr,
+				      (unsigned long) request, 0x00,
+				      request->options);
+		if (rc == 0) {
+			request->status = TAPE_REQUEST_IN_IO;
+			break;
+		}
+		/* Start failed. Remove request and indicate failure. */
+		DBF_EVENT(1, "tape: DOIO failed with er = %i\n", rc);
+
+		/* Set ending status and do callback. */
+		request->rc = rc;
+		request->status = TAPE_REQUEST_DONE;
+		__tape_remove_request(device, request);
+	}
+}
+
+static void
+__tape_remove_request(struct tape_device *device, struct tape_request *request)
+{
+	/* Remove from request queue. */
+	list_del(&request->list);
+
+	/* Do callback. */
+	if (request->callback != NULL)
+		request->callback(request, request->callback_data);
+
+	/* Start next request. */
+	if (!list_empty(&device->req_queue))
+		__tape_do_io_list(device);
+}
+
+/*
+ * Write sense data to console/dbf
+ */
+void
+tape_dump_sense(struct tape_device* device, struct tape_request *request,
+		struct irb *irb)
+{
+	unsigned int *sptr;
+
+	PRINT_INFO("-------------------------------------------------\n");
+	PRINT_INFO("DSTAT : %02x  CSTAT: %02x	CPA: %04x\n",
+		   irb->scsw.dstat, irb->scsw.cstat, irb->scsw.cpa);
+	PRINT_INFO("DEVICE: %s\n", device->cdev->dev.bus_id);
+	if (request != NULL)
+		PRINT_INFO("OP	  : %s\n", tape_op_verbose[request->op]);
+
+	sptr = (unsigned int *) irb->ecw;
+	PRINT_INFO("Sense data: %08X %08X %08X %08X \n",
+		   sptr[0], sptr[1], sptr[2], sptr[3]);
+	PRINT_INFO("Sense data: %08X %08X %08X %08X \n",
+		   sptr[4], sptr[5], sptr[6], sptr[7]);
+	PRINT_INFO("--------------------------------------------------\n");
+}
+
+/*
+ * Write sense data to dbf
+ */
+void
+tape_dump_sense_dbf(struct tape_device *device, struct tape_request *request,
+		    struct irb *irb)
+{
+	unsigned int *sptr;
+	const char* op;
+
+	if (request != NULL)
+		op = tape_op_verbose[request->op];
+	else
+		op = "---";
+	DBF_EVENT(3, "DSTAT : %02x   CSTAT: %02x\n",
+		  irb->scsw.dstat,irb->scsw.cstat);
+	DBF_EVENT(3, "DEVICE: %08x OP\t: %s\n", device->cdev_id, op);
+	sptr = (unsigned int *) irb->ecw;
+	DBF_EVENT(3, "%08x %08x\n", sptr[0], sptr[1]);
+	DBF_EVENT(3, "%08x %08x\n", sptr[2], sptr[3]);
+	DBF_EVENT(3, "%08x %08x\n", sptr[4], sptr[5]);
+	DBF_EVENT(3, "%08x %08x\n", sptr[6], sptr[7]);
+}
+
+/*
+ * I/O helper function. Adds the request to the request queue
+ * and starts it if the tape is idle. Has to be called with
+ * the device lock held.
+ */
+static inline int
+__tape_do_io(struct tape_device *device, struct tape_request *request)
+{
+	int rc;
+
+	switch (request->op) {
+		case TO_MSEN:
+		case TO_ASSIGN:
+		case TO_UNASSIGN:
+		case TO_READ_ATTMSG:
+			if (device->tape_state == TS_INIT)
+				break;
+			if (device->tape_state == TS_UNUSED)
+				break;
+		default:
+			if (device->tape_state == TS_BLKUSE)
+				break;
+			if (device->tape_state != TS_IN_USE)
+				return -ENODEV;
+	}
+
+	/* Increase use count of device for the added request. */
+	request->device = tape_get_device_reference(device);
+
+	if (list_empty(&device->req_queue)) {
+		/* No other requests are on the queue. Start this one. */
+#ifdef CONFIG_S390_TAPE_BLOCK
+		if (request->op == TO_BLOCK)
+			device->discipline->check_locate(device, request);
+#endif
+		rc = ccw_device_start(device->cdev, request->cpaddr,
+				      (unsigned long) request, 0x00,
+				      request->options);
+		if (rc) {
+			DBF_EVENT(1, "tape: DOIO failed with rc = %i\n", rc);
+			return rc;
+		}
+		DBF_LH(5, "Request %p added for execution.\n", request);
+		list_add(&request->list, &device->req_queue);
+		request->status = TAPE_REQUEST_IN_IO;
+	} else {
+		DBF_LH(5, "Request %p add to queue.\n", request);
+		list_add_tail(&request->list, &device->req_queue);
+		request->status = TAPE_REQUEST_QUEUED;
+	}
+	return 0;
+}
+
+/*
+ * Add the request to the request queue, try to start it if the
+ * tape is idle. Return without waiting for end of i/o.
+ */
+int
+tape_do_io_async(struct tape_device *device, struct tape_request *request)
+{
+	int rc;
+
+	DBF_LH(6, "tape_do_io_async(%p, %p)\n", device, request);
+
+	spin_lock_irq(get_ccwdev_lock(device->cdev));
+	/* Add request to request queue and try to start it. */
+	rc = __tape_do_io(device, request);
+	spin_unlock_irq(get_ccwdev_lock(device->cdev));
+	return rc;
+}
+
+/*
+ * tape_do_io/__tape_wake_up
+ * Add the request to the request queue, try to start it if the
+ * tape is idle and wait uninterruptible for its completion.
+ */
+static void
+__tape_wake_up(struct tape_request *request, void *data)
+{
+	request->callback = NULL;
+	wake_up((wait_queue_head_t *) data);
+}
+
+int
+tape_do_io(struct tape_device *device, struct tape_request *request)
+{
+	wait_queue_head_t wq;
+	int rc;
+
+	init_waitqueue_head(&wq);
+	spin_lock_irq(get_ccwdev_lock(device->cdev));
+	/* Setup callback */
+	request->callback = __tape_wake_up;
+	request->callback_data = &wq;
+	/* Add request to request queue and try to start it. */
+	rc = __tape_do_io(device, request);
+	spin_unlock_irq(get_ccwdev_lock(device->cdev));
+	if (rc)
+		return rc;
+	/* Request added to the queue. Wait for its completion. */
+	wait_event(wq, (request->callback == NULL));
+	/* Get rc from request */
+	return request->rc;
+}
+
+/*
+ * tape_do_io_interruptible/__tape_wake_up_interruptible
+ * Add the request to the request queue, try to start it if the
+ * tape is idle and wait uninterruptible for its completion.
+ */
+static void
+__tape_wake_up_interruptible(struct tape_request *request, void *data)
+{
+	request->callback = NULL;
+	wake_up_interruptible((wait_queue_head_t *) data);
+}
+
+int
+tape_do_io_interruptible(struct tape_device *device,
+			 struct tape_request *request)
+{
+	wait_queue_head_t wq;
+	int rc;
+
+	init_waitqueue_head(&wq);
+	spin_lock_irq(get_ccwdev_lock(device->cdev));
+	/* Setup callback */
+	request->callback = __tape_wake_up_interruptible;
+	request->callback_data = &wq;
+	rc = __tape_do_io(device, request);
+	spin_unlock_irq(get_ccwdev_lock(device->cdev));
+	if (rc)
+		return rc;
+	/* Request added to the queue. Wait for its completion. */
+	rc = wait_event_interruptible(wq, (request->callback == NULL));
+	if (rc != -ERESTARTSYS)
+		/* Request finished normally. */
+		return request->rc;
+	/* Interrupted by a signal. We have to stop the current request. */
+	spin_lock_irq(get_ccwdev_lock(device->cdev));
+	rc = __tape_halt_io(device, request);
+	if (rc == 0) {
+		DBF_EVENT(3, "IO stopped on %08x\n", device->cdev_id);
+		rc = -ERESTARTSYS;
+	}
+	spin_unlock_irq(get_ccwdev_lock(device->cdev));
+	return rc;
+}
+
+/*
+ * Handle requests that return an i/o error in the irb.
+ */
+static inline void
+tape_handle_killed_request(
+	struct tape_device *device,
+	struct tape_request *request)
+{
+	if(request != NULL) {
+		/* Set ending status. FIXME: Should the request be retried? */
+		request->rc = -EIO;
+		request->status = TAPE_REQUEST_DONE;
+		__tape_remove_request(device, request);
+	} else {
+		__tape_do_io_list(device);
+	}
+}
+
+/*
+ * Tape interrupt routine, called from the ccw_device layer
+ */
+static void
+__tape_do_irq (struct ccw_device *cdev, unsigned long intparm, struct irb *irb)
+{
+	struct tape_device *device;
+	struct tape_request *request;
+	int final;
+	int rc;
+
+	device = (struct tape_device *) cdev->dev.driver_data;
+	if (device == NULL) {
+		PRINT_ERR("could not get device structure for %s "
+			  "in interrupt\n", cdev->dev.bus_id);
+		return;
+	}
+	request = (struct tape_request *) intparm;
+
+	DBF_LH(6, "__tape_do_irq(device=%p, request=%p)\n", device, request);
+
+	/* On special conditions irb is an error pointer */
+	if (IS_ERR(irb)) {
+		switch (PTR_ERR(irb)) {
+			case -ETIMEDOUT:
+				PRINT_WARN("(%s): Request timed out\n",
+					cdev->dev.bus_id);
+			case -EIO:
+				tape_handle_killed_request(device, request);
+				break;
+			default:
+				PRINT_ERR("(%s): Unexpected i/o error %li\n",
+					cdev->dev.bus_id,
+					PTR_ERR(irb));
+		}
+		return;
+	}
+
+	/* May be an unsolicited irq */
+	if(request != NULL)
+		request->rescnt = irb->scsw.count;
+
+	if (irb->scsw.dstat != 0x0c) {
+		/* Set the 'ONLINE' flag depending on sense byte 1 */
+		if(*(((__u8 *) irb->ecw) + 1) & SENSE_DRIVE_ONLINE)
+			device->tape_generic_status |= GMT_ONLINE(~0);
+		else
+			device->tape_generic_status &= ~GMT_ONLINE(~0);
+
+		/*
+		 * Any request that does not come back with channel end
+		 * and device end is unusual. Log the sense data.
+		 */
+		DBF_EVENT(3,"-- Tape Interrupthandler --\n");
+		tape_dump_sense_dbf(device, request, irb);
+	} else {
+		/* Upon normal completion the device _is_ online */
+		device->tape_generic_status |= GMT_ONLINE(~0);
+	}
+	if (device->tape_state == TS_NOT_OPER) {
+		DBF_EVENT(6, "tape:device is not operational\n");
+		return;
+	}
+
+	/*
+	 * Request that were canceled still come back with an interrupt.
+	 * To detect these request the state will be set to TAPE_REQUEST_DONE.
+	 */
+	if(request != NULL && request->status == TAPE_REQUEST_DONE) {
+		__tape_remove_request(device, request);
+		return;
+	}
+
+	rc = device->discipline->irq(device, request, irb);
+	/*
+	 * rc < 0 : request finished unsuccessfully.
+	 * rc == TAPE_IO_SUCCESS: request finished successfully.
+	 * rc == TAPE_IO_PENDING: request is still running. Ignore rc.
+	 * rc == TAPE_IO_RETRY: request finished but needs another go.
+	 * rc == TAPE_IO_STOP: request needs to get terminated.
+	 */
+	final = 0;
+	switch (rc) {
+	case TAPE_IO_SUCCESS:
+		/* Upon normal completion the device _is_ online */
+		device->tape_generic_status |= GMT_ONLINE(~0);
+		final = 1;
+		break;
+	case TAPE_IO_PENDING:
+		break;
+	case TAPE_IO_RETRY:
+#ifdef CONFIG_S390_TAPE_BLOCK
+		if (request->op == TO_BLOCK)
+			device->discipline->check_locate(device, request);
+#endif
+		rc = ccw_device_start(cdev, request->cpaddr,
+				      (unsigned long) request, 0x00,
+				      request->options);
+		if (rc) {
+			DBF_EVENT(1, "tape: DOIO failed with er = %i\n", rc);
+			final = 1;
+		}
+		break;
+	case TAPE_IO_STOP:
+		__tape_halt_io(device, request);
+		break;
+	default:
+		if (rc > 0) {
+			DBF_EVENT(6, "xunknownrc\n");
+			PRINT_ERR("Invalid return code from discipline "
+				  "interrupt function.\n");
+			rc = -EIO;
+		}
+		final = 1;
+		break;
+	}
+	if (final) {
+		/* May be an unsolicited irq */
+		if(request != NULL) {
+			/* Set ending status. */
+			request->rc = rc;
+			request->status = TAPE_REQUEST_DONE;
+			__tape_remove_request(device, request);
+		} else {
+			__tape_do_io_list(device);
+		}
+	}
+}
+
+/*
+ * Tape device open function used by tape_char & tape_block frontends.
+ */
+int
+tape_open(struct tape_device *device)
+{
+	int rc;
+
+	spin_lock(get_ccwdev_lock(device->cdev));
+	if (device->tape_state == TS_NOT_OPER) {
+		DBF_EVENT(6, "TAPE:nodev\n");
+		rc = -ENODEV;
+	} else if (device->tape_state == TS_IN_USE) {
+		DBF_EVENT(6, "TAPE:dbusy\n");
+		rc = -EBUSY;
+	} else if (device->tape_state == TS_BLKUSE) {
+		DBF_EVENT(6, "TAPE:dbusy\n");
+		rc = -EBUSY;
+	} else if (device->discipline != NULL &&
+		   !try_module_get(device->discipline->owner)) {
+		DBF_EVENT(6, "TAPE:nodisc\n");
+		rc = -ENODEV;
+	} else {
+		tape_state_set(device, TS_IN_USE);
+		rc = 0;
+	}
+	spin_unlock(get_ccwdev_lock(device->cdev));
+	return rc;
+}
+
+/*
+ * Tape device release function used by tape_char & tape_block frontends.
+ */
+int
+tape_release(struct tape_device *device)
+{
+	spin_lock(get_ccwdev_lock(device->cdev));
+	if (device->tape_state == TS_IN_USE)
+		tape_state_set(device, TS_UNUSED);
+	module_put(device->discipline->owner);
+	spin_unlock(get_ccwdev_lock(device->cdev));
+	return 0;
+}
+
+/*
+ * Execute a magnetic tape command a number of times.
+ */
+int
+tape_mtop(struct tape_device *device, int mt_op, int mt_count)
+{
+	tape_mtop_fn fn;
+	int rc;
+
+	DBF_EVENT(6, "TAPE:mtio\n");
+	DBF_EVENT(6, "TAPE:ioop: %x\n", mt_op);
+	DBF_EVENT(6, "TAPE:arg:	 %x\n", mt_count);
+
+	if (mt_op < 0 || mt_op >= TAPE_NR_MTOPS)
+		return -EINVAL;
+	fn = device->discipline->mtop_array[mt_op];
+	if (fn == NULL)
+		return -EINVAL;
+
+	/* We assume that the backends can handle count up to 500. */
+	if (mt_op == MTBSR  || mt_op == MTFSR  || mt_op == MTFSF  ||
+	    mt_op == MTBSF  || mt_op == MTFSFM || mt_op == MTBSFM) {
+		rc = 0;
+		for (; mt_count > 500; mt_count -= 500)
+			if ((rc = fn(device, 500)) != 0)
+				break;
+		if (rc == 0)
+			rc = fn(device, mt_count);
+	} else
+		rc = fn(device, mt_count);
+	return rc;
+
+}
+
+/*
+ * Tape init function.
+ */
+static int
+tape_init (void)
+{
+	TAPE_DBF_AREA = debug_register ( "tape", 1, 2, 4*sizeof(long));
+	debug_register_view(TAPE_DBF_AREA, &debug_sprintf_view);
+#ifdef DBF_LIKE_HELL
+	debug_set_level(TAPE_DBF_AREA, 6);
+#endif
+	DBF_EVENT(3, "tape init: ($Revision: 1.51 $)\n");
+	tape_proc_init();
+	tapechar_init ();
+	tapeblock_init ();
+	return 0;
+}
+
+/*
+ * Tape exit function.
+ */
+static void
+tape_exit(void)
+{
+	DBF_EVENT(6, "tape exit\n");
+
+	/* Get rid of the frontends */
+	tapechar_exit();
+	tapeblock_exit();
+	tape_proc_cleanup();
+	debug_unregister (TAPE_DBF_AREA);
+}
+
+MODULE_AUTHOR("(C) 2001 IBM Deutschland Entwicklung GmbH by Carsten Otte and "
+	      "Michael Holzheu (cotte@de.ibm.com,holzheu@de.ibm.com)");
+MODULE_DESCRIPTION("Linux on zSeries channel attached "
+		   "tape device driver ($Revision: 1.51 $)");
+MODULE_LICENSE("GPL");
+
+module_init(tape_init);
+module_exit(tape_exit);
+
+EXPORT_SYMBOL(tape_generic_remove);
+EXPORT_SYMBOL(tape_generic_probe);
+EXPORT_SYMBOL(tape_generic_online);
+EXPORT_SYMBOL(tape_generic_offline);
+EXPORT_SYMBOL(tape_put_device);
+EXPORT_SYMBOL(tape_get_device_reference);
+EXPORT_SYMBOL(tape_state_verbose);
+EXPORT_SYMBOL(tape_op_verbose);
+EXPORT_SYMBOL(tape_state_set);
+EXPORT_SYMBOL(tape_med_state_set);
+EXPORT_SYMBOL(tape_alloc_request);
+EXPORT_SYMBOL(tape_free_request);
+EXPORT_SYMBOL(tape_dump_sense);
+EXPORT_SYMBOL(tape_dump_sense_dbf);
+EXPORT_SYMBOL(tape_do_io);
+EXPORT_SYMBOL(tape_do_io_async);
+EXPORT_SYMBOL(tape_do_io_interruptible);
+EXPORT_SYMBOL(tape_mtop);
diff --git a/drivers/s390/char/tape_proc.c b/drivers/s390/char/tape_proc.c
new file mode 100644
index 0000000..801d17c
--- /dev/null
+++ b/drivers/s390/char/tape_proc.c
@@ -0,0 +1,145 @@
+/*
+ *  drivers/s390/char/tape.c
+ *    tape device driver for S/390 and zSeries tapes.
+ *
+ *  S390 and zSeries version
+ *    Copyright (C) 2001 IBM Corporation
+ *    Author(s): Carsten Otte <cotte@de.ibm.com>
+ *		 Michael Holzheu <holzheu@de.ibm.com>
+ *		 Tuan Ngo-Anh <ngoanh@de.ibm.com>
+ *
+ * PROCFS Functions
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/vmalloc.h>
+#include <linux/seq_file.h>
+
+#define TAPE_DBF_AREA	tape_core_dbf
+
+#include "tape.h"
+
+#define PRINTK_HEADER "TAPE_PROC: "
+
+static const char *tape_med_st_verbose[MS_SIZE] =
+{
+	[MS_UNKNOWN] = "UNKNOWN ",
+	[MS_LOADED] = "LOADED  ",
+	[MS_UNLOADED] = "UNLOADED"
+};
+
+/* our proc tapedevices entry */
+static struct proc_dir_entry *tape_proc_devices;
+
+/*
+ * Show function for /proc/tapedevices
+ */
+static int tape_proc_show(struct seq_file *m, void *v)
+{
+	struct tape_device *device;
+	struct tape_request *request;
+	const char *str;
+	unsigned long n;
+
+	n = (unsigned long) v - 1;
+	if (!n) {
+		seq_printf(m, "TapeNo\tBusID      CuType/Model\t"
+			"DevType/Model\tBlkSize\tState\tOp\tMedState\n");
+	}
+	device = tape_get_device(n);
+	if (IS_ERR(device))
+		return 0;
+	spin_lock_irq(get_ccwdev_lock(device->cdev));
+	seq_printf(m, "%d\t", (int) n);
+	seq_printf(m, "%-10.10s ", device->cdev->dev.bus_id);
+	seq_printf(m, "%04X/", device->cdev->id.cu_type);
+	seq_printf(m, "%02X\t", device->cdev->id.cu_model);
+	seq_printf(m, "%04X/", device->cdev->id.dev_type);
+	seq_printf(m, "%02X\t\t", device->cdev->id.dev_model);
+	if (device->char_data.block_size == 0)
+		seq_printf(m, "auto\t");
+	else
+		seq_printf(m, "%i\t", device->char_data.block_size);
+	if (device->tape_state >= 0 &&
+	    device->tape_state < TS_SIZE)
+		str = tape_state_verbose[device->tape_state];
+	else
+		str = "UNKNOWN";
+	seq_printf(m, "%s\t", str);
+	if (!list_empty(&device->req_queue)) {
+		request = list_entry(device->req_queue.next,
+				     struct tape_request, list);
+		str = tape_op_verbose[request->op];
+	} else
+		str = "---";
+	seq_printf(m, "%s\t", str);
+	seq_printf(m, "%s\n", tape_med_st_verbose[device->medium_state]);
+	spin_unlock_irq(get_ccwdev_lock(device->cdev));
+	tape_put_device(device);
+        return 0;
+}
+
+static void *tape_proc_start(struct seq_file *m, loff_t *pos)
+{
+	if (*pos >= 256 / TAPE_MINORS_PER_DEV)
+		return NULL;
+	return (void *)((unsigned long) *pos + 1);
+}
+
+static void *tape_proc_next(struct seq_file *m, void *v, loff_t *pos)
+{
+	++*pos;
+	return tape_proc_start(m, pos);
+}
+
+static void tape_proc_stop(struct seq_file *m, void *v)
+{
+}
+
+static struct seq_operations tape_proc_seq = {
+	.start		= tape_proc_start,
+	.next		= tape_proc_next,
+	.stop		= tape_proc_stop,
+	.show		= tape_proc_show,
+};
+
+static int tape_proc_open(struct inode *inode, struct file *file)
+{
+	return seq_open(file, &tape_proc_seq);
+}
+
+static struct file_operations tape_proc_ops =
+{
+	.open		= tape_proc_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= seq_release,
+};
+
+/*
+ * Initialize procfs stuff on startup
+ */
+void
+tape_proc_init(void)
+{
+	tape_proc_devices =
+		create_proc_entry ("tapedevices", S_IFREG | S_IRUGO | S_IWUSR,
+				   &proc_root);
+	if (tape_proc_devices == NULL) {
+		PRINT_WARN("tape: Cannot register procfs entry tapedevices\n");
+		return;
+	}
+	tape_proc_devices->proc_fops = &tape_proc_ops;
+	tape_proc_devices->owner = THIS_MODULE;
+}
+
+/*
+ * Cleanup all stuff registered to the procfs
+ */
+void
+tape_proc_cleanup(void)
+{
+	if (tape_proc_devices != NULL)
+		remove_proc_entry ("tapedevices", &proc_root);
+}
diff --git a/drivers/s390/char/tape_std.c b/drivers/s390/char/tape_std.c
new file mode 100644
index 0000000..2f9fe30
--- /dev/null
+++ b/drivers/s390/char/tape_std.c
@@ -0,0 +1,765 @@
+/*
+ *  drivers/s390/char/tape_std.c
+ *    standard tape device functions for ibm tapes.
+ *
+ *  S390 and zSeries version
+ *    Copyright (C) 2001,2002 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *    Author(s): Carsten Otte <cotte@de.ibm.com>
+ *		 Michael Holzheu <holzheu@de.ibm.com>
+ *		 Tuan Ngo-Anh <ngoanh@de.ibm.com>
+ *		 Martin Schwidefsky <schwidefsky@de.ibm.com>
+ *		 Stefan Bader <shbader@de.ibm.com>
+ */
+
+#include <linux/config.h>
+#include <linux/stddef.h>
+#include <linux/kernel.h>
+#include <linux/bio.h>
+#include <linux/timer.h>
+
+#include <asm/types.h>
+#include <asm/idals.h>
+#include <asm/ebcdic.h>
+#include <asm/tape390.h>
+
+#define TAPE_DBF_AREA	tape_core_dbf
+
+#include "tape.h"
+#include "tape_std.h"
+
+#define PRINTK_HEADER "TAPE_STD: "
+
+/*
+ * tape_std_assign
+ */
+static void
+tape_std_assign_timeout(unsigned long data)
+{
+	struct tape_request *	request;
+	struct tape_device *	device;
+
+	request = (struct tape_request *) data;
+	if ((device = request->device) == NULL)
+		BUG();
+
+	spin_lock_irq(get_ccwdev_lock(device->cdev));
+	if (request->callback != NULL) {
+		DBF_EVENT(3, "%08x: Assignment timeout. Device busy.\n",
+			device->cdev_id);
+		PRINT_ERR("%s: Assignment timeout. Device busy.\n",
+			device->cdev->dev.bus_id);
+		ccw_device_clear(device->cdev, (long) request);
+	}
+	spin_unlock_irq(get_ccwdev_lock(device->cdev));
+}
+
+int
+tape_std_assign(struct tape_device *device)
+{
+	int                  rc;
+	struct timer_list    timeout;
+	struct tape_request *request;
+
+	request = tape_alloc_request(2, 11);
+	if (IS_ERR(request))
+		return PTR_ERR(request);
+
+	request->op = TO_ASSIGN;
+	tape_ccw_cc(request->cpaddr, ASSIGN, 11, request->cpdata);
+	tape_ccw_end(request->cpaddr + 1, NOP, 0, NULL);
+
+	/*
+	 * The assign command sometimes blocks if the device is assigned
+	 * to another host (actually this shouldn't happen but it does).
+	 * So we set up a timeout for this call.
+	 */
+	init_timer(&timeout);
+	timeout.function = tape_std_assign_timeout;
+	timeout.data     = (unsigned long) request;
+	timeout.expires  = jiffies + 2 * HZ;
+	add_timer(&timeout);
+
+	rc = tape_do_io_interruptible(device, request);
+
+	del_timer(&timeout);
+
+	if (rc != 0) {
+		PRINT_WARN("%s: assign failed - device might be busy\n",
+			device->cdev->dev.bus_id);
+		DBF_EVENT(3, "%08x: assign failed - device might be busy\n",
+			device->cdev_id);
+	} else {
+		DBF_EVENT(3, "%08x: Tape assigned\n", device->cdev_id);
+	}
+	tape_free_request(request);
+	return rc;
+}
+
+/*
+ * tape_std_unassign
+ */
+int
+tape_std_unassign (struct tape_device *device)
+{
+	int                  rc;
+	struct tape_request *request;
+
+	if (device->tape_state == TS_NOT_OPER) {
+		DBF_EVENT(3, "(%08x): Can't unassign device\n",
+			device->cdev_id);
+		PRINT_WARN("(%s): Can't unassign device - device gone\n",
+			device->cdev->dev.bus_id);
+		return -EIO;
+	}
+
+	request = tape_alloc_request(2, 11);
+	if (IS_ERR(request))
+		return PTR_ERR(request);
+
+	request->op = TO_UNASSIGN;
+	tape_ccw_cc(request->cpaddr, UNASSIGN, 11, request->cpdata);
+	tape_ccw_end(request->cpaddr + 1, NOP, 0, NULL);
+
+	if ((rc = tape_do_io(device, request)) != 0) {
+		DBF_EVENT(3, "%08x: Unassign failed\n", device->cdev_id);
+		PRINT_WARN("%s: Unassign failed\n", device->cdev->dev.bus_id);
+	} else {
+		DBF_EVENT(3, "%08x: Tape unassigned\n", device->cdev_id);
+	}
+	tape_free_request(request);
+	return rc;
+}
+
+/*
+ * TAPE390_DISPLAY: Show a string on the tape display.
+ */
+int
+tape_std_display(struct tape_device *device, struct display_struct *disp)
+{
+	struct tape_request *request;
+	int rc;
+
+	request = tape_alloc_request(2, 17);
+	if (IS_ERR(request)) {
+		DBF_EVENT(3, "TAPE: load display failed\n");
+		return PTR_ERR(request);
+	}
+	request->op = TO_DIS;
+
+	*(unsigned char *) request->cpdata = disp->cntrl;
+	DBF_EVENT(5, "TAPE: display cntrl=%04x\n", disp->cntrl);
+	memcpy(((unsigned char *) request->cpdata) + 1, disp->message1, 8);
+	memcpy(((unsigned char *) request->cpdata) + 9, disp->message2, 8);
+	ASCEBC(((unsigned char*) request->cpdata) + 1, 16);
+
+	tape_ccw_cc(request->cpaddr, LOAD_DISPLAY, 17, request->cpdata);
+	tape_ccw_end(request->cpaddr + 1, NOP, 0, NULL);
+
+	rc = tape_do_io_interruptible(device, request);
+	tape_free_request(request);
+	return rc;
+}
+
+/*
+ * Read block id.
+ */
+int
+tape_std_read_block_id(struct tape_device *device, __u64 *id)
+{
+	struct tape_request *request;
+	int rc;
+
+	request = tape_alloc_request(3, 8);
+	if (IS_ERR(request))
+		return PTR_ERR(request);
+	request->op = TO_RBI;
+	/* setup ccws */
+	tape_ccw_cc(request->cpaddr, MODE_SET_DB, 1, device->modeset_byte);
+	tape_ccw_cc(request->cpaddr + 1, READ_BLOCK_ID, 8, request->cpdata);
+	tape_ccw_end(request->cpaddr + 2, NOP, 0, NULL);
+	/* execute it */
+	rc = tape_do_io(device, request);
+	if (rc == 0)
+		/* Get result from read buffer. */
+		*id = *(__u64 *) request->cpdata;
+	tape_free_request(request);
+	return rc;
+}
+
+int
+tape_std_terminate_write(struct tape_device *device)
+{
+	int rc;
+
+	if(device->required_tapemarks == 0)
+		return 0;
+
+	DBF_LH(5, "tape%d: terminate write %dxEOF\n", device->first_minor,
+		device->required_tapemarks);
+
+	rc = tape_mtop(device, MTWEOF, device->required_tapemarks);
+	if (rc)
+		return rc;
+
+	device->required_tapemarks = 0;
+	return tape_mtop(device, MTBSR, 1);
+}
+
+/*
+ * MTLOAD: Loads the tape.
+ * The default implementation just wait until the tape medium state changes
+ * to MS_LOADED.
+ */
+int
+tape_std_mtload(struct tape_device *device, int count)
+{
+	return wait_event_interruptible(device->state_change_wq,
+		(device->medium_state == MS_LOADED));
+}
+
+/*
+ * MTSETBLK: Set block size.
+ */
+int
+tape_std_mtsetblk(struct tape_device *device, int count)
+{
+	struct idal_buffer *new;
+
+	DBF_LH(6, "tape_std_mtsetblk(%d)\n", count);
+	if (count <= 0) {
+		/*
+		 * Just set block_size to 0. tapechar_read/tapechar_write
+		 * will realloc the idal buffer if a bigger one than the
+		 * current is needed.
+		 */
+		device->char_data.block_size = 0;
+		return 0;
+	}
+	if (device->char_data.idal_buf != NULL &&
+	    device->char_data.idal_buf->size == count)
+		/* We already have a idal buffer of that size. */
+		return 0;
+
+	if (count > MAX_BLOCKSIZE) {
+		DBF_EVENT(3, "Invalid block size (%d > %d) given.\n",
+			count, MAX_BLOCKSIZE);
+		PRINT_ERR("Invalid block size (%d > %d) given.\n",
+			count, MAX_BLOCKSIZE);
+		return -EINVAL;
+	}
+
+	/* Allocate a new idal buffer. */
+	new = idal_buffer_alloc(count, 0);
+	if (new == NULL)
+		return -ENOMEM;
+	if (device->char_data.idal_buf != NULL)
+		idal_buffer_free(device->char_data.idal_buf);
+	device->char_data.idal_buf = new;
+	device->char_data.block_size = count;
+
+	DBF_LH(6, "new blocksize is %d\n", device->char_data.block_size);
+
+	return 0;
+}
+
+/*
+ * MTRESET: Set block size to 0.
+ */
+int
+tape_std_mtreset(struct tape_device *device, int count)
+{
+	DBF_EVENT(6, "TCHAR:devreset:\n");
+	device->char_data.block_size = 0;
+	return 0;
+}
+
+/*
+ * MTFSF: Forward space over 'count' file marks. The tape is positioned
+ * at the EOT (End of Tape) side of the file mark.
+ */
+int
+tape_std_mtfsf(struct tape_device *device, int mt_count)
+{
+	struct tape_request *request;
+	struct ccw1 *ccw;
+
+	request = tape_alloc_request(mt_count + 2, 0);
+	if (IS_ERR(request))
+		return PTR_ERR(request);
+	request->op = TO_FSF;
+	/* setup ccws */
+	ccw = tape_ccw_cc(request->cpaddr, MODE_SET_DB, 1,
+			  device->modeset_byte);
+	ccw = tape_ccw_repeat(ccw, FORSPACEFILE, mt_count);
+	ccw = tape_ccw_end(ccw, NOP, 0, NULL);
+
+	/* execute it */
+	return tape_do_io_free(device, request);
+}
+
+/*
+ * MTFSR: Forward space over 'count' tape blocks (blocksize is set
+ * via MTSETBLK.
+ */
+int
+tape_std_mtfsr(struct tape_device *device, int mt_count)
+{
+	struct tape_request *request;
+	struct ccw1 *ccw;
+	int rc;
+
+	request = tape_alloc_request(mt_count + 2, 0);
+	if (IS_ERR(request))
+		return PTR_ERR(request);
+	request->op = TO_FSB;
+	/* setup ccws */
+	ccw = tape_ccw_cc(request->cpaddr, MODE_SET_DB, 1,
+			  device->modeset_byte);
+	ccw = tape_ccw_repeat(ccw, FORSPACEBLOCK, mt_count);
+	ccw = tape_ccw_end(ccw, NOP, 0, NULL);
+
+	/* execute it */
+	rc = tape_do_io(device, request);
+	if (rc == 0 && request->rescnt > 0) {
+		DBF_LH(3, "FSR over tapemark\n");
+		rc = 1;
+	}
+	tape_free_request(request);
+
+	return rc;
+}
+
+/*
+ * MTBSR: Backward space over 'count' tape blocks.
+ * (blocksize is set via MTSETBLK.
+ */
+int
+tape_std_mtbsr(struct tape_device *device, int mt_count)
+{
+	struct tape_request *request;
+	struct ccw1 *ccw;
+	int rc;
+
+	request = tape_alloc_request(mt_count + 2, 0);
+	if (IS_ERR(request))
+		return PTR_ERR(request);
+	request->op = TO_BSB;
+	/* setup ccws */
+	ccw = tape_ccw_cc(request->cpaddr, MODE_SET_DB, 1,
+			  device->modeset_byte);
+	ccw = tape_ccw_repeat(ccw, BACKSPACEBLOCK, mt_count);
+	ccw = tape_ccw_end(ccw, NOP, 0, NULL);
+
+	/* execute it */
+	rc = tape_do_io(device, request);
+	if (rc == 0 && request->rescnt > 0) {
+		DBF_LH(3, "BSR over tapemark\n");
+		rc = 1;
+	}
+	tape_free_request(request);
+
+	return rc;
+}
+
+/*
+ * MTWEOF: Write 'count' file marks at the current position.
+ */
+int
+tape_std_mtweof(struct tape_device *device, int mt_count)
+{
+	struct tape_request *request;
+	struct ccw1 *ccw;
+
+	request = tape_alloc_request(mt_count + 2, 0);
+	if (IS_ERR(request))
+		return PTR_ERR(request);
+	request->op = TO_WTM;
+	/* setup ccws */
+	ccw = tape_ccw_cc(request->cpaddr, MODE_SET_DB, 1,
+			  device->modeset_byte);
+	ccw = tape_ccw_repeat(ccw, WRITETAPEMARK, mt_count);
+	ccw = tape_ccw_end(ccw, NOP, 0, NULL);
+
+	/* execute it */
+	return tape_do_io_free(device, request);
+}
+
+/*
+ * MTBSFM: Backward space over 'count' file marks.
+ * The tape is positioned at the BOT (Begin Of Tape) side of the
+ * last skipped file mark.
+ */
+int
+tape_std_mtbsfm(struct tape_device *device, int mt_count)
+{
+	struct tape_request *request;
+	struct ccw1 *ccw;
+
+	request = tape_alloc_request(mt_count + 2, 0);
+	if (IS_ERR(request))
+		return PTR_ERR(request);
+	request->op = TO_BSF;
+	/* setup ccws */
+	ccw = tape_ccw_cc(request->cpaddr, MODE_SET_DB, 1,
+			  device->modeset_byte);
+	ccw = tape_ccw_repeat(ccw, BACKSPACEFILE, mt_count);
+	ccw = tape_ccw_end(ccw, NOP, 0, NULL);
+
+	/* execute it */
+	return tape_do_io_free(device, request);
+}
+
+/*
+ * MTBSF: Backward space over 'count' file marks. The tape is positioned at
+ * the EOT (End of Tape) side of the last skipped file mark.
+ */
+int
+tape_std_mtbsf(struct tape_device *device, int mt_count)
+{
+	struct tape_request *request;
+	struct ccw1 *ccw;
+	int rc;
+
+	request = tape_alloc_request(mt_count + 2, 0);
+	if (IS_ERR(request))
+		return PTR_ERR(request);
+	request->op = TO_BSF;
+	/* setup ccws */
+	ccw = tape_ccw_cc(request->cpaddr, MODE_SET_DB, 1,
+			  device->modeset_byte);
+	ccw = tape_ccw_repeat(ccw, BACKSPACEFILE, mt_count);
+	ccw = tape_ccw_end(ccw, NOP, 0, NULL);
+	/* execute it */
+	rc = tape_do_io_free(device, request);
+	if (rc == 0) {
+		rc = tape_mtop(device, MTFSR, 1);
+		if (rc > 0)
+			rc = 0;
+	}
+	return rc;
+}
+
+/*
+ * MTFSFM: Forward space over 'count' file marks.
+ * The tape is positioned at the BOT (Begin Of Tape) side
+ * of the last skipped file mark.
+ */
+int
+tape_std_mtfsfm(struct tape_device *device, int mt_count)
+{
+	struct tape_request *request;
+	struct ccw1 *ccw;
+	int rc;
+
+	request = tape_alloc_request(mt_count + 2, 0);
+	if (IS_ERR(request))
+		return PTR_ERR(request);
+	request->op = TO_FSF;
+	/* setup ccws */
+	ccw = tape_ccw_cc(request->cpaddr, MODE_SET_DB, 1,
+			  device->modeset_byte);
+	ccw = tape_ccw_repeat(ccw, FORSPACEFILE, mt_count);
+	ccw = tape_ccw_end(ccw, NOP, 0, NULL);
+	/* execute it */
+	rc = tape_do_io_free(device, request);
+	if (rc == 0) {
+		rc = tape_mtop(device, MTBSR, 1);
+		if (rc > 0)
+			rc = 0;
+	}
+
+	return rc;
+}
+
+/*
+ * MTREW: Rewind the tape.
+ */
+int
+tape_std_mtrew(struct tape_device *device, int mt_count)
+{
+	struct tape_request *request;
+
+	request = tape_alloc_request(3, 0);
+	if (IS_ERR(request))
+		return PTR_ERR(request);
+	request->op = TO_REW;
+	/* setup ccws */
+	tape_ccw_cc(request->cpaddr, MODE_SET_DB, 1,
+		    device->modeset_byte);
+	tape_ccw_cc(request->cpaddr + 1, REWIND, 0, NULL);
+	tape_ccw_end(request->cpaddr + 2, NOP, 0, NULL);
+
+	/* execute it */
+	return tape_do_io_free(device, request);
+}
+
+/*
+ * MTOFFL: Rewind the tape and put the drive off-line.
+ * Implement 'rewind unload'
+ */
+int
+tape_std_mtoffl(struct tape_device *device, int mt_count)
+{
+	struct tape_request *request;
+
+	request = tape_alloc_request(3, 0);
+	if (IS_ERR(request))
+		return PTR_ERR(request);
+	request->op = TO_RUN;
+	/* setup ccws */
+	tape_ccw_cc(request->cpaddr, MODE_SET_DB, 1, device->modeset_byte);
+	tape_ccw_cc(request->cpaddr + 1, REWIND_UNLOAD, 0, NULL);
+	tape_ccw_end(request->cpaddr + 2, NOP, 0, NULL);
+
+	/* execute it */
+	return tape_do_io_free(device, request);
+}
+
+/*
+ * MTNOP: 'No operation'.
+ */
+int
+tape_std_mtnop(struct tape_device *device, int mt_count)
+{
+	struct tape_request *request;
+
+	request = tape_alloc_request(2, 0);
+	if (IS_ERR(request))
+		return PTR_ERR(request);
+	request->op = TO_NOP;
+	/* setup ccws */
+	tape_ccw_cc(request->cpaddr, MODE_SET_DB, 1, device->modeset_byte);
+	tape_ccw_end(request->cpaddr + 1, NOP, 0, NULL);
+	/* execute it */
+	return tape_do_io_free(device, request);
+}
+
+/*
+ * MTEOM: positions at the end of the portion of the tape already used
+ * for recordind data. MTEOM positions after the last file mark, ready for
+ * appending another file.
+ */
+int
+tape_std_mteom(struct tape_device *device, int mt_count)
+{
+	int rc;
+
+	/*
+	 * Seek from the beginning of tape (rewind).
+	 */
+	if ((rc = tape_mtop(device, MTREW, 1)) < 0)
+		return rc;
+
+	/*
+	 * The logical end of volume is given by two sewuential tapemarks.
+	 * Look for this by skipping to the next file (over one tapemark)
+	 * and then test for another one (fsr returns 1 if a tapemark was
+	 * encountered).
+	 */
+	do {
+		if ((rc = tape_mtop(device, MTFSF, 1)) < 0)
+			return rc;
+		if ((rc = tape_mtop(device, MTFSR, 1)) < 0)
+			return rc;
+	} while (rc == 0);
+
+	return tape_mtop(device, MTBSR, 1);
+}
+
+/*
+ * MTRETEN: Retension the tape, i.e. forward space to end of tape and rewind.
+ */
+int
+tape_std_mtreten(struct tape_device *device, int mt_count)
+{
+	struct tape_request *request;
+	int rc;
+
+	request = tape_alloc_request(4, 0);
+	if (IS_ERR(request))
+		return PTR_ERR(request);
+	request->op = TO_FSF;
+	/* setup ccws */
+	tape_ccw_cc(request->cpaddr, MODE_SET_DB, 1, device->modeset_byte);
+	tape_ccw_cc(request->cpaddr + 1,FORSPACEFILE, 0, NULL);
+	tape_ccw_cc(request->cpaddr + 2, NOP, 0, NULL);
+	tape_ccw_end(request->cpaddr + 3, CCW_CMD_TIC, 0, request->cpaddr);
+	/* execute it, MTRETEN rc gets ignored */
+	rc = tape_do_io_interruptible(device, request);
+	tape_free_request(request);
+	return tape_mtop(device, MTREW, 1);
+}
+
+/*
+ * MTERASE: erases the tape.
+ */
+int
+tape_std_mterase(struct tape_device *device, int mt_count)
+{
+	struct tape_request *request;
+
+	request = tape_alloc_request(6, 0);
+	if (IS_ERR(request))
+		return PTR_ERR(request);
+	request->op = TO_DSE;
+	/* setup ccws */
+	tape_ccw_cc(request->cpaddr, MODE_SET_DB, 1, device->modeset_byte);
+	tape_ccw_cc(request->cpaddr + 1, REWIND, 0, NULL);
+	tape_ccw_cc(request->cpaddr + 2, ERASE_GAP, 0, NULL);
+	tape_ccw_cc(request->cpaddr + 3, DATA_SEC_ERASE, 0, NULL);
+	tape_ccw_cc(request->cpaddr + 4, REWIND, 0, NULL);
+	tape_ccw_end(request->cpaddr + 5, NOP, 0, NULL);
+
+	/* execute it */
+	return tape_do_io_free(device, request);
+}
+
+/*
+ * MTUNLOAD: Rewind the tape and unload it.
+ */
+int
+tape_std_mtunload(struct tape_device *device, int mt_count)
+{
+	return tape_mtop(device, MTOFFL, mt_count);
+}
+
+/*
+ * MTCOMPRESSION: used to enable compression.
+ * Sets the IDRC on/off.
+ */
+int
+tape_std_mtcompression(struct tape_device *device, int mt_count)
+{
+	struct tape_request *request;
+
+	if (mt_count < 0 || mt_count > 1) {
+		DBF_EXCEPTION(6, "xcom parm\n");
+		if (*device->modeset_byte & 0x08)
+			PRINT_INFO("(%s) Compression is currently on\n",
+				   device->cdev->dev.bus_id);
+		else
+			PRINT_INFO("(%s) Compression is currently off\n",
+				   device->cdev->dev.bus_id);
+		PRINT_INFO("Use 1 to switch compression on, 0 to "
+			   "switch it off\n");
+		return -EINVAL;
+	}
+	request = tape_alloc_request(2, 0);
+	if (IS_ERR(request))
+		return PTR_ERR(request);
+	request->op = TO_NOP;
+	/* setup ccws */
+	*device->modeset_byte = (mt_count == 0) ? 0x00 : 0x08;
+	tape_ccw_cc(request->cpaddr, MODE_SET_DB, 1, device->modeset_byte);
+	tape_ccw_end(request->cpaddr + 1, NOP, 0, NULL);
+	/* execute it */
+	return tape_do_io_free(device, request);
+}
+
+/*
+ * Read Block
+ */
+struct tape_request *
+tape_std_read_block(struct tape_device *device, size_t count)
+{
+	struct tape_request *request;
+
+	/*
+	 * We have to alloc 4 ccws in order to be able to transform request
+	 * into a read backward request in error case.
+	 */
+	request = tape_alloc_request(4, 0);
+	if (IS_ERR(request)) {
+		DBF_EXCEPTION(6, "xrbl fail");
+		return request;
+	}
+	request->op = TO_RFO;
+	tape_ccw_cc(request->cpaddr, MODE_SET_DB, 1, device->modeset_byte);
+	tape_ccw_end_idal(request->cpaddr + 1, READ_FORWARD,
+			  device->char_data.idal_buf);
+	DBF_EVENT(6, "xrbl ccwg\n");
+	return request;
+}
+
+/*
+ * Read Block backward transformation function.
+ */
+void
+tape_std_read_backward(struct tape_device *device, struct tape_request *request)
+{
+	/*
+	 * We have allocated 4 ccws in tape_std_read, so we can now
+	 * transform the request to a read backward, followed by a
+	 * forward space block.
+	 */
+	request->op = TO_RBA;
+	tape_ccw_cc(request->cpaddr, MODE_SET_DB, 1, device->modeset_byte);
+	tape_ccw_cc_idal(request->cpaddr + 1, READ_BACKWARD,
+			 device->char_data.idal_buf);
+	tape_ccw_cc(request->cpaddr + 2, FORSPACEBLOCK, 0, NULL);
+	tape_ccw_end(request->cpaddr + 3, NOP, 0, NULL);
+	DBF_EVENT(6, "xrop ccwg");}
+
+/*
+ * Write Block
+ */
+struct tape_request *
+tape_std_write_block(struct tape_device *device, size_t count)
+{
+	struct tape_request *request;
+
+	request = tape_alloc_request(2, 0);
+	if (IS_ERR(request)) {
+		DBF_EXCEPTION(6, "xwbl fail\n");
+		return request;
+	}
+	request->op = TO_WRI;
+	tape_ccw_cc(request->cpaddr, MODE_SET_DB, 1, device->modeset_byte);
+	tape_ccw_end_idal(request->cpaddr + 1, WRITE_CMD,
+			  device->char_data.idal_buf);
+	DBF_EVENT(6, "xwbl ccwg\n");
+	return request;
+}
+
+/*
+ * This routine is called by frontend after an ENOSP on write
+ */
+void
+tape_std_process_eov(struct tape_device *device)
+{
+	/*
+	 * End of volume: We have to backspace the last written record, then
+	 * we TRY to write a tapemark and then backspace over the written TM
+	 */
+	if (tape_mtop(device, MTBSR, 1) == 0 &&
+	    tape_mtop(device, MTWEOF, 1) == 0) {
+		tape_mtop(device, MTBSR, 1);
+	}
+}
+
+EXPORT_SYMBOL(tape_std_assign);
+EXPORT_SYMBOL(tape_std_unassign);
+EXPORT_SYMBOL(tape_std_display);
+EXPORT_SYMBOL(tape_std_read_block_id);
+EXPORT_SYMBOL(tape_std_mtload);
+EXPORT_SYMBOL(tape_std_mtsetblk);
+EXPORT_SYMBOL(tape_std_mtreset);
+EXPORT_SYMBOL(tape_std_mtfsf);
+EXPORT_SYMBOL(tape_std_mtfsr);
+EXPORT_SYMBOL(tape_std_mtbsr);
+EXPORT_SYMBOL(tape_std_mtweof);
+EXPORT_SYMBOL(tape_std_mtbsfm);
+EXPORT_SYMBOL(tape_std_mtbsf);
+EXPORT_SYMBOL(tape_std_mtfsfm);
+EXPORT_SYMBOL(tape_std_mtrew);
+EXPORT_SYMBOL(tape_std_mtoffl);
+EXPORT_SYMBOL(tape_std_mtnop);
+EXPORT_SYMBOL(tape_std_mteom);
+EXPORT_SYMBOL(tape_std_mtreten);
+EXPORT_SYMBOL(tape_std_mterase);
+EXPORT_SYMBOL(tape_std_mtunload);
+EXPORT_SYMBOL(tape_std_mtcompression);
+EXPORT_SYMBOL(tape_std_read_block);
+EXPORT_SYMBOL(tape_std_read_backward);
+EXPORT_SYMBOL(tape_std_write_block);
+EXPORT_SYMBOL(tape_std_process_eov);
diff --git a/drivers/s390/char/tape_std.h b/drivers/s390/char/tape_std.h
new file mode 100644
index 0000000..3ab6aaf
--- /dev/null
+++ b/drivers/s390/char/tape_std.h
@@ -0,0 +1,152 @@
+/*
+ *  drivers/s390/char/tape_34xx.h
+ *    standard tape device functions for ibm tapes.
+ *
+ *  S390 and zSeries version
+ *    Copyright (C) 2001,2002 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ *    Author(s): Carsten Otte <cotte@de.ibm.com>
+ *		 Tuan Ngo-Anh <ngoanh@de.ibm.com>
+ *		 Martin Schwidefsky <schwidefsky@de.ibm.com>
+ */
+
+#ifndef _TAPE_STD_H
+#define _TAPE_STD_H
+
+#include <asm/tape390.h>
+
+/*
+ * Biggest block size to handle. Currently 64K because we only build
+ * channel programs without data chaining.
+ */
+#define MAX_BLOCKSIZE   65535
+
+/*
+ * The CCW commands for the Tape type of command.
+ */
+#define INVALID_00		0x00	/* Invalid cmd */
+#define BACKSPACEBLOCK		0x27	/* Back Space block */
+#define BACKSPACEFILE		0x2f	/* Back Space file */
+#define DATA_SEC_ERASE		0x97	/* Data security erase */
+#define ERASE_GAP		0x17	/* Erase Gap */
+#define FORSPACEBLOCK		0x37	/* Forward space block */
+#define FORSPACEFILE		0x3F	/* Forward Space file */
+#define FORCE_STREAM_CNT	0xEB	/* Forced streaming count # */
+#define NOP			0x03	/* No operation	*/
+#define READ_FORWARD		0x02	/* Read forward */
+#define REWIND			0x07	/* Rewind */
+#define REWIND_UNLOAD		0x0F	/* Rewind and Unload */
+#define SENSE			0x04	/* Sense */
+#define NEW_MODE_SET		0xEB	/* Guess it is Mode set */
+#define WRITE_CMD		0x01	/* Write */
+#define WRITETAPEMARK		0x1F	/* Write Tape Mark */
+
+#define ASSIGN			0xB7	/* 3420 REJECT,3480 OK	*/
+#define CONTROL_ACCESS		0xE3	/* Set high speed */
+#define DIAG_MODE_SET		0x0B	/* 3420 NOP, 3480 REJECT */
+#define LOAD_DISPLAY		0x9F	/* 3420 REJECT,3480 OK */
+#define LOCATE			0x4F	/* 3420 REJ, 3480 NOP */
+#define LOOP_WRITE_TO_READ	0x8B	/* 3480 REJECT */
+#define MODE_SET_DB		0xDB	/* 3420 REJECT,3480 OK */
+#define MODE_SET_C3		0xC3	/* for 3420 */
+#define MODE_SET_CB		0xCB	/* for 3420 */
+#define MODE_SET_D3		0xD3	/* for 3420 */
+#define READ_BACKWARD		0x0C	/* */
+#define READ_BLOCK_ID		0x22	/* 3420 REJECT,3480 OK */
+#define READ_BUFFER		0x12	/* 3420 REJECT,3480 OK */
+#define READ_BUFF_LOG		0x24	/* 3420 REJECT,3480 OK */
+#define RELEASE			0xD4	/* 3420 NOP, 3480 REJECT */
+#define REQ_TRK_IN_ERROR	0x1B	/* 3420 NOP, 3480 REJECT */
+#define RESERVE			0xF4	/* 3420 NOP, 3480 REJECT */
+#define SENSE_GROUP_ID		0x34	/* 3420 REJECT,3480 OK */
+#define SENSE_ID		0xE4	/* 3420 REJECT,3480 OK */
+#define READ_DEV_CHAR		0x64	/* Read device characteristics */
+#define SET_DIAGNOSE		0x4B	/* 3420 NOP, 3480 REJECT */
+#define SET_GROUP_ID		0xAF	/* 3420 REJECT,3480 OK */
+#define SET_TAPE_WRITE_IMMED	0xC3	/* for 3480 */
+#define SUSPEND			0x5B	/* 3420 REJ, 3480 NOP */
+#define SYNC			0x43	/* Synchronize (flush buffer) */
+#define UNASSIGN		0xC7	/* 3420 REJECT,3480 OK */
+#define PERF_SUBSYS_FUNC	0x77	/* 3490 CMD */
+#define READ_CONFIG_DATA	0xFA	/* 3490 CMD */
+#define READ_MESSAGE_ID		0x4E	/* 3490 CMD */
+#define READ_SUBSYS_DATA	0x3E	/* 3490 CMD */
+#define SET_INTERFACE_ID	0x73	/* 3490 CMD */
+
+#define SENSE_COMMAND_REJECT		0x80
+#define SENSE_INTERVENTION_REQUIRED	0x40
+#define SENSE_BUS_OUT_CHECK		0x20
+#define SENSE_EQUIPMENT_CHECK		0x10
+#define SENSE_DATA_CHECK		0x08
+#define SENSE_OVERRUN			0x04
+#define SENSE_DEFERRED_UNIT_CHECK	0x02
+#define SENSE_ASSIGNED_ELSEWHERE	0x01
+
+#define SENSE_LOCATE_FAILURE		0x80
+#define SENSE_DRIVE_ONLINE		0x40
+#define SENSE_RESERVED			0x20
+#define SENSE_RECORD_SEQUENCE_ERR	0x10
+#define SENSE_BEGINNING_OF_TAPE		0x08
+#define SENSE_WRITE_MODE		0x04
+#define SENSE_WRITE_PROTECT		0x02
+#define SENSE_NOT_CAPABLE		0x01
+
+#define SENSE_CHANNEL_ADAPTER_CODE	0xE0
+#define SENSE_CHANNEL_ADAPTER_LOC	0x10
+#define SENSE_REPORTING_CU		0x08
+#define SENSE_AUTOMATIC_LOADER		0x04
+#define SENSE_TAPE_SYNC_MODE		0x02
+#define SENSE_TAPE_POSITIONING		0x01
+
+/* discipline functions */
+struct tape_request *tape_std_read_block(struct tape_device *, size_t);
+void tape_std_read_backward(struct tape_device *device,
+			    struct tape_request *request);
+struct tape_request *tape_std_write_block(struct tape_device *, size_t);
+struct tape_request *tape_std_bread(struct tape_device *, struct request *);
+void tape_std_free_bread(struct tape_request *);
+void tape_std_check_locate(struct tape_device *, struct tape_request *);
+struct tape_request *tape_std_bwrite(struct request *,
+				     struct tape_device *, int);
+
+/* Some non-mtop commands. */
+int tape_std_assign(struct tape_device *);
+int tape_std_unassign(struct tape_device *);
+int tape_std_read_block_id(struct tape_device *device, __u64 *id);
+int tape_std_display(struct tape_device *, struct display_struct *disp);
+int tape_std_terminate_write(struct tape_device *);
+
+/* Standard magnetic tape commands. */
+int tape_std_mtbsf(struct tape_device *, int);
+int tape_std_mtbsfm(struct tape_device *, int);
+int tape_std_mtbsr(struct tape_device *, int);
+int tape_std_mtcompression(struct tape_device *, int);
+int tape_std_mteom(struct tape_device *, int);
+int tape_std_mterase(struct tape_device *, int);
+int tape_std_mtfsf(struct tape_device *, int);
+int tape_std_mtfsfm(struct tape_device *, int);
+int tape_std_mtfsr(struct tape_device *, int);
+int tape_std_mtload(struct tape_device *, int);
+int tape_std_mtnop(struct tape_device *, int);
+int tape_std_mtoffl(struct tape_device *, int);
+int tape_std_mtreset(struct tape_device *, int);
+int tape_std_mtreten(struct tape_device *, int);
+int tape_std_mtrew(struct tape_device *, int);
+int tape_std_mtsetblk(struct tape_device *, int);
+int tape_std_mtunload(struct tape_device *, int);
+int tape_std_mtweof(struct tape_device *, int);
+
+/* Event handlers */
+void tape_std_default_handler(struct tape_device *);
+void tape_std_unexpect_uchk_handler(struct tape_device *);
+void tape_std_irq(struct tape_device *);
+void tape_std_process_eov(struct tape_device *);
+
+// the error recovery stuff:
+void tape_std_error_recovery(struct tape_device *);
+void tape_std_error_recovery_has_failed(struct tape_device *,int error_id);
+void tape_std_error_recovery_succeded(struct tape_device *);
+void tape_std_error_recovery_do_retry(struct tape_device *);
+void tape_std_error_recovery_read_opposite(struct tape_device *);
+void tape_std_error_recovery_HWBUG(struct tape_device *, int condno);
+
+#endif // _TAPE_STD_H
diff --git a/drivers/s390/char/tty3270.c b/drivers/s390/char/tty3270.c
new file mode 100644
index 0000000..7db5ebc
--- /dev/null
+++ b/drivers/s390/char/tty3270.c
@@ -0,0 +1,1836 @@
+/*
+ *  drivers/s390/char/tty3270.c
+ *    IBM/3270 Driver - tty functions.
+ *
+ *  Author(s):
+ *    Original 3270 Code for 2.4 written by Richard Hitt (UTS Global)
+ *    Rewritten for 2.5 by Martin Schwidefsky <schwidefsky@de.ibm.com>
+ *	-- Copyright (C) 2003 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kdev_t.h>
+#include <linux/tty.h>
+#include <linux/vt_kern.h>
+#include <linux/init.h>
+#include <linux/console.h>
+#include <linux/interrupt.h>
+
+#include <linux/slab.h>
+#include <linux/bootmem.h>
+
+#include <asm/ccwdev.h>
+#include <asm/cio.h>
+#include <asm/ebcdic.h>
+#include <asm/uaccess.h>
+
+
+#include "raw3270.h"
+#include "keyboard.h"
+
+#define TTY3270_CHAR_BUF_SIZE 256
+#define TTY3270_OUTPUT_BUFFER_SIZE 1024
+#define TTY3270_STRING_PAGES 5
+
+struct tty_driver *tty3270_driver;
+static int tty3270_max_index;
+
+struct raw3270_fn tty3270_fn;
+
+struct tty3270_cell {
+	unsigned char character;
+	unsigned char highlight;
+	unsigned char f_color;
+};
+
+struct tty3270_line {
+	struct tty3270_cell *cells;
+	int len;
+};
+
+#define ESCAPE_NPAR 8
+
+/*
+ * The main tty view data structure.
+ * FIXME:
+ * 1) describe line orientation & lines list concept against screen
+ * 2) describe conversion of screen to lines
+ * 3) describe line format.
+ */
+struct tty3270 {
+	struct raw3270_view view;
+	struct tty_struct *tty;		/* Pointer to tty structure */
+	void **freemem_pages;		/* Array of pages used for freemem. */
+	struct list_head freemem;	/* List of free memory for strings. */
+
+	/* Output stuff. */
+	struct list_head lines;		/* List of lines. */
+	struct list_head update;	/* List of lines to update. */
+	unsigned char wcc;		/* Write control character. */
+	int nr_lines;			/* # lines in list. */
+	int nr_up;			/* # lines up in history. */
+	unsigned long update_flags;	/* Update indication bits. */
+	struct string *status;		/* Lower right of display. */
+	struct raw3270_request *write;	/* Single write request. */
+	struct timer_list timer;	/* Output delay timer. */
+
+	/* Current tty screen. */
+	unsigned int cx, cy;		/* Current output position. */
+	unsigned int highlight;		/* Blink/reverse/underscore */
+	unsigned int f_color;		/* Foreground color */
+	struct tty3270_line *screen;
+
+	/* Input stuff. */
+	struct string *prompt;		/* Output string for input area. */
+	struct string *input;		/* Input string for read request. */
+	struct raw3270_request *read;	/* Single read request. */
+	struct raw3270_request *kreset;	/* Single keyboard reset request. */
+	unsigned char inattr;		/* Visible/invisible input. */
+	int throttle, attn;		/* tty throttle/unthrottle. */
+	struct tasklet_struct readlet;	/* Tasklet to issue read request. */
+	struct kbd_data *kbd;		/* key_maps stuff. */
+
+	/* Escape sequence parsing. */
+	int esc_state, esc_ques, esc_npar;
+	int esc_par[ESCAPE_NPAR];
+	unsigned int saved_cx, saved_cy;
+	unsigned int saved_highlight, saved_f_color;
+
+	/* Command recalling. */
+	struct list_head rcl_lines;	/* List of recallable lines. */
+	struct list_head *rcl_walk;	/* Point in rcl_lines list. */
+	int rcl_nr, rcl_max;		/* Number/max number of rcl_lines. */
+
+	/* Character array for put_char/flush_chars. */
+	unsigned int char_count;
+	char char_buf[TTY3270_CHAR_BUF_SIZE];
+};
+
+/* tty3270->update_flags. See tty3270_update for details. */
+#define TTY_UPDATE_ERASE	1	/* Use EWRITEA instead of WRITE. */
+#define TTY_UPDATE_LIST		2	/* Update lines in tty3270->update. */
+#define TTY_UPDATE_INPUT	4	/* Update input line. */
+#define TTY_UPDATE_STATUS	8	/* Update status line. */
+#define TTY_UPDATE_ALL		15
+
+static void tty3270_update(struct tty3270 *);
+
+/*
+ * Setup timeout for a device. On timeout trigger an update.
+ */
+void
+tty3270_set_timer(struct tty3270 *tp, int expires)
+{
+	if (expires == 0) {
+		if (timer_pending(&tp->timer) && del_timer(&tp->timer))
+			raw3270_put_view(&tp->view);
+		return;
+	}
+	if (timer_pending(&tp->timer) &&
+	    mod_timer(&tp->timer, jiffies + expires))
+		return;
+	raw3270_get_view(&tp->view);
+	tp->timer.function = (void (*)(unsigned long)) tty3270_update;
+	tp->timer.data = (unsigned long) tp;
+	tp->timer.expires = jiffies + expires;
+	add_timer(&tp->timer);
+}
+
+/*
+ * The input line are the two last lines of the screen.
+ */
+static void
+tty3270_update_prompt(struct tty3270 *tp, char *input, int count)
+{
+	struct string *line;
+	unsigned int off;
+
+	line = tp->prompt;
+	if (count != 0)
+		line->string[5] = TF_INMDT;
+	else
+		line->string[5] = tp->inattr;
+	if (count > tp->view.cols * 2 - 11)
+		count = tp->view.cols * 2 - 11;
+	memcpy(line->string + 6, input, count);
+	line->string[6 + count] = TO_IC;
+	/* Clear to end of input line. */
+	if (count < tp->view.cols * 2 - 11) {
+		line->string[7 + count] = TO_RA;
+		line->string[10 + count] = 0;
+		off = tp->view.cols * tp->view.rows - 9;
+		raw3270_buffer_address(tp->view.dev, line->string+count+8, off);
+		line->len = 11 + count;
+	} else
+		line->len = 7 + count;
+	tp->update_flags |= TTY_UPDATE_INPUT;
+}
+
+static void
+tty3270_create_prompt(struct tty3270 *tp)
+{
+	static const unsigned char blueprint[] =
+		{ TO_SBA, 0, 0, 0x6e, TO_SF, TF_INPUT,
+		  /* empty input string */
+		  TO_IC, TO_RA, 0, 0, 0 };
+	struct string *line;
+	unsigned int offset;
+
+	line = alloc_string(&tp->freemem,
+			    sizeof(blueprint) + tp->view.cols * 2 - 9);
+	tp->prompt = line;
+	tp->inattr = TF_INPUT;
+	/* Copy blueprint to status line */
+	memcpy(line->string, blueprint, sizeof(blueprint));
+	line->len = sizeof(blueprint);
+	/* Set output offsets. */
+	offset = tp->view.cols * (tp->view.rows - 2);
+	raw3270_buffer_address(tp->view.dev, line->string + 1, offset);
+	offset = tp->view.cols * tp->view.rows - 9;
+	raw3270_buffer_address(tp->view.dev, line->string + 8, offset);
+
+	/* Allocate input string for reading. */
+	tp->input = alloc_string(&tp->freemem, tp->view.cols * 2 - 9 + 6);
+}
+
+/*
+ * The status line is the last line of the screen. It shows the string
+ * "Running"/"Holding" in the lower right corner of the screen.
+ */
+static void
+tty3270_update_status(struct tty3270 * tp)
+{
+	char *str;
+
+	str = (tp->nr_up != 0) ? "History" : "Running";
+	memcpy(tp->status->string + 8, str, 7);
+	codepage_convert(tp->view.ascebc, tp->status->string + 8, 7);
+	tp->update_flags |= TTY_UPDATE_STATUS;
+}
+
+static void
+tty3270_create_status(struct tty3270 * tp)
+{
+	static const unsigned char blueprint[] =
+		{ TO_SBA, 0, 0, TO_SF, TF_LOG, TO_SA, TAT_COLOR, TAC_GREEN,
+		  0, 0, 0, 0, 0, 0, 0, TO_SF, TF_LOG, TO_SA, TAT_COLOR,
+		  TAC_RESET };
+	struct string *line;
+	unsigned int offset;
+
+	line = alloc_string(&tp->freemem,sizeof(blueprint));
+	tp->status = line;
+	/* Copy blueprint to status line */
+	memcpy(line->string, blueprint, sizeof(blueprint));
+	/* Set address to start of status string (= last 9 characters). */
+	offset = tp->view.cols * tp->view.rows - 9;
+	raw3270_buffer_address(tp->view.dev, line->string + 1, offset);
+}
+
+/*
+ * Set output offsets to 3270 datastream fragment of a tty string.
+ * (TO_SBA offset at the start and TO_RA offset at the end of the string)
+ */
+static void
+tty3270_update_string(struct tty3270 *tp, struct string *line, int nr)
+{
+	unsigned char *cp;
+
+	raw3270_buffer_address(tp->view.dev, line->string + 1,
+			       tp->view.cols * nr);
+	cp = line->string + line->len - 4;
+	if (*cp == TO_RA)
+		raw3270_buffer_address(tp->view.dev, cp + 1,
+				       tp->view.cols * (nr + 1));
+}
+
+/*
+ * Rebuild update list to print all lines.
+ */
+static void
+tty3270_rebuild_update(struct tty3270 *tp)
+{
+	struct string *s, *n;
+	int line, nr_up;
+
+	/* 
+	 * Throw away update list and create a new one,
+	 * containing all lines that will fit on the screen.
+	 */
+	list_for_each_entry_safe(s, n, &tp->update, update)
+		list_del_init(&s->update);
+	line = tp->view.rows - 3;
+	nr_up = tp->nr_up;
+	list_for_each_entry_reverse(s, &tp->lines, list) {
+		if (nr_up > 0) {
+			nr_up--;
+			continue;
+		}
+		tty3270_update_string(tp, s, line);
+		list_add(&s->update, &tp->update);
+		if (--line < 0)
+			break;
+	}
+	tp->update_flags |= TTY_UPDATE_LIST;
+}
+
+/*
+ * Alloc string for size bytes. If there is not enough room in
+ * freemem, free strings until there is room.
+ */
+static struct string *
+tty3270_alloc_string(struct tty3270 *tp, size_t size)
+{
+	struct string *s, *n;
+
+	s = alloc_string(&tp->freemem, size);
+	if (s)
+		return s;
+	list_for_each_entry_safe(s, n, &tp->lines, list) {
+		BUG_ON(tp->nr_lines <= tp->view.rows - 2);
+		list_del(&s->list);
+		if (!list_empty(&s->update))
+			list_del(&s->update);
+		tp->nr_lines--;
+		if (free_string(&tp->freemem, s) >= size)
+			break;
+	}
+	s = alloc_string(&tp->freemem, size);
+	BUG_ON(!s);
+	if (tp->nr_up != 0 &&
+	    tp->nr_up + tp->view.rows - 2 >= tp->nr_lines) {
+		tp->nr_up = tp->nr_lines - tp->view.rows + 2;
+		tty3270_rebuild_update(tp);
+		tty3270_update_status(tp);
+	}
+	return s;
+}
+
+/*
+ * Add an empty line to the list.
+ */
+static void
+tty3270_blank_line(struct tty3270 *tp)
+{
+	static const unsigned char blueprint[] =
+		{ TO_SBA, 0, 0, TO_SA, TAT_EXTHI, TAX_RESET,
+		  TO_SA, TAT_COLOR, TAC_RESET, TO_RA, 0, 0, 0 };
+	struct string *s;
+
+	s = tty3270_alloc_string(tp, sizeof(blueprint));
+	memcpy(s->string, blueprint, sizeof(blueprint));
+	s->len = sizeof(blueprint);
+	list_add_tail(&s->list, &tp->lines);
+	tp->nr_lines++;
+	if (tp->nr_up != 0)
+		tp->nr_up++;
+}
+
+/*
+ * Write request completion callback.
+ */
+static void
+tty3270_write_callback(struct raw3270_request *rq, void *data)
+{
+	struct tty3270 *tp;
+
+	tp = (struct tty3270 *) rq->view;
+	if (rq->rc != 0) {
+		/* Write wasn't successfull. Refresh all. */
+		tty3270_rebuild_update(tp);
+		tp->update_flags = TTY_UPDATE_ALL;
+		tty3270_set_timer(tp, 1);
+	}
+	raw3270_request_reset(rq);
+	xchg(&tp->write, rq);
+}
+
+/*
+ * Update 3270 display.
+ */
+static void
+tty3270_update(struct tty3270 *tp)
+{
+	static char invalid_sba[2] = { 0xff, 0xff };
+	struct raw3270_request *wrq;
+	unsigned long updated;
+	struct string *s, *n;
+	char *sba, *str;
+	int rc, len;
+
+	wrq = xchg(&tp->write, 0);
+	if (!wrq) {
+		tty3270_set_timer(tp, 1);
+		return;
+	}
+
+	spin_lock(&tp->view.lock);
+	updated = 0;
+	if (tp->update_flags & TTY_UPDATE_ERASE) {
+		/* Use erase write alternate to erase display. */
+		raw3270_request_set_cmd(wrq, TC_EWRITEA);
+		updated |= TTY_UPDATE_ERASE;
+	} else
+		raw3270_request_set_cmd(wrq, TC_WRITE);
+
+	raw3270_request_add_data(wrq, &tp->wcc, 1);
+	tp->wcc = TW_NONE;
+
+	/*
+	 * Update status line.
+	 */
+	if (tp->update_flags & TTY_UPDATE_STATUS)
+		if (raw3270_request_add_data(wrq, tp->status->string,
+					     tp->status->len) == 0)
+			updated |= TTY_UPDATE_STATUS;
+
+	/*
+	 * Write input line.
+	 */
+	if (tp->update_flags & TTY_UPDATE_INPUT)
+		if (raw3270_request_add_data(wrq, tp->prompt->string,
+					     tp->prompt->len) == 0)
+			updated |= TTY_UPDATE_INPUT;
+
+	sba = invalid_sba;
+	
+	if (tp->update_flags & TTY_UPDATE_LIST) {
+		/* Write strings in the update list to the screen. */
+		list_for_each_entry_safe(s, n, &tp->update, update) {
+			str = s->string;
+			len = s->len;
+			/*
+			 * Skip TO_SBA at the start of the string if the
+			 * last output position matches the start address
+			 * of this line.
+			 */
+			if (s->string[1] == sba[0] && s->string[2] == sba[1])
+				str += 3, len -= 3;
+			if (raw3270_request_add_data(wrq, str, len) != 0)
+				break;
+			list_del_init(&s->update);
+			sba = s->string + s->len - 3;
+		}
+		if (list_empty(&tp->update))
+			updated |= TTY_UPDATE_LIST;
+	}
+	wrq->callback = tty3270_write_callback;
+	rc = raw3270_start(&tp->view, wrq);
+	if (rc == 0) {
+		tp->update_flags &= ~updated;
+		if (tp->update_flags)
+			tty3270_set_timer(tp, 1);
+	} else {
+		raw3270_request_reset(wrq);
+		xchg(&tp->write, wrq);
+	}
+	spin_unlock(&tp->view.lock);
+	raw3270_put_view(&tp->view);
+}
+
+/*
+ * Command recalling.
+ */
+static void
+tty3270_rcl_add(struct tty3270 *tp, char *input, int len)
+{
+	struct string *s;
+
+	tp->rcl_walk = 0;
+	if (len <= 0)
+		return;
+	if (tp->rcl_nr >= tp->rcl_max) {
+		s = list_entry(tp->rcl_lines.next, struct string, list);
+		list_del(&s->list);
+		free_string(&tp->freemem, s);
+		tp->rcl_nr--;
+	}
+	s = tty3270_alloc_string(tp, len);
+	memcpy(s->string, input, len);
+	list_add_tail(&s->list, &tp->rcl_lines);
+	tp->rcl_nr++;
+}
+
+static void
+tty3270_rcl_backward(struct kbd_data *kbd)
+{
+	struct tty3270 *tp;
+	struct string *s;
+
+	tp = kbd->tty->driver_data;
+	spin_lock_bh(&tp->view.lock);
+	if (tp->inattr == TF_INPUT) {
+		if (tp->rcl_walk && tp->rcl_walk->prev != &tp->rcl_lines)
+			tp->rcl_walk = tp->rcl_walk->prev;
+		else if (!list_empty(&tp->rcl_lines))
+			tp->rcl_walk = tp->rcl_lines.prev;
+		s = tp->rcl_walk ? 
+			list_entry(tp->rcl_walk, struct string, list) : 0;
+		if (tp->rcl_walk) {
+			s = list_entry(tp->rcl_walk, struct string, list);
+			tty3270_update_prompt(tp, s->string, s->len);
+		} else
+			tty3270_update_prompt(tp, 0, 0);
+		tty3270_set_timer(tp, 1);
+	}
+	spin_unlock_bh(&tp->view.lock);
+}
+
+/*
+ * Deactivate tty view.
+ */
+static void
+tty3270_exit_tty(struct kbd_data *kbd)
+{
+	struct tty3270 *tp;
+
+	tp = kbd->tty->driver_data;
+	raw3270_deactivate_view(&tp->view);
+}
+
+/*
+ * Scroll forward in history.
+ */
+static void
+tty3270_scroll_forward(struct kbd_data *kbd)
+{
+	struct tty3270 *tp;
+	int nr_up;
+
+	tp = kbd->tty->driver_data;
+	spin_lock_bh(&tp->view.lock);
+	nr_up = tp->nr_up - tp->view.rows + 2;
+	if (nr_up < 0)
+		nr_up = 0;
+	if (nr_up != tp->nr_up) {
+		tp->nr_up = nr_up;
+		tty3270_rebuild_update(tp);
+		tty3270_update_status(tp);
+		tty3270_set_timer(tp, 1);
+	}
+	spin_unlock_bh(&tp->view.lock);
+}
+
+/*
+ * Scroll backward in history.
+ */
+static void
+tty3270_scroll_backward(struct kbd_data *kbd)
+{
+	struct tty3270 *tp;
+	int nr_up;
+
+	tp = kbd->tty->driver_data;
+	spin_lock_bh(&tp->view.lock);
+	nr_up = tp->nr_up + tp->view.rows - 2;
+	if (nr_up + tp->view.rows - 2 > tp->nr_lines)
+		nr_up = tp->nr_lines - tp->view.rows + 2;
+	if (nr_up != tp->nr_up) {
+		tp->nr_up = nr_up;
+		tty3270_rebuild_update(tp);
+		tty3270_update_status(tp);
+		tty3270_set_timer(tp, 1);
+	}
+	spin_unlock_bh(&tp->view.lock);
+}
+
+/*
+ * Pass input line to tty.
+ */
+static void
+tty3270_read_tasklet(struct raw3270_request *rrq)
+{
+	static char kreset_data = TW_KR;
+	struct tty3270 *tp;
+	char *input;
+	int len;
+
+	tp = (struct tty3270 *) rrq->view;
+	spin_lock_bh(&tp->view.lock);
+	/*
+	 * Two AID keys are special: For 0x7d (enter) the input line
+	 * has to be emitted to the tty and for 0x6d the screen
+	 * needs to be redrawn.
+	 */
+	input = 0;
+	len = 0;
+	if (tp->input->string[0] == 0x7d) {
+		/* Enter: write input to tty. */
+		input = tp->input->string + 6;
+		len = tp->input->len - 6 - rrq->rescnt;
+		if (tp->inattr != TF_INPUTN)
+			tty3270_rcl_add(tp, input, len);
+		if (tp->nr_up > 0) {
+			tp->nr_up = 0;
+			tty3270_rebuild_update(tp);
+			tty3270_update_status(tp);
+		}
+		/* Clear input area. */
+		tty3270_update_prompt(tp, 0, 0);
+		tty3270_set_timer(tp, 1);
+	} else if (tp->input->string[0] == 0x6d) {
+		/* Display has been cleared. Redraw. */
+		tty3270_rebuild_update(tp);
+		tp->update_flags = TTY_UPDATE_ALL;
+		tty3270_set_timer(tp, 1);
+	}
+	spin_unlock_bh(&tp->view.lock);
+
+	/* Start keyboard reset command. */
+	raw3270_request_reset(tp->kreset);
+	raw3270_request_set_cmd(tp->kreset, TC_WRITE);
+	raw3270_request_add_data(tp->kreset, &kreset_data, 1);
+	raw3270_start(&tp->view, tp->kreset);
+
+	/* Emit input string. */
+	if (tp->tty) {
+		while (len-- > 0)
+			kbd_keycode(tp->kbd, *input++);
+		/* Emit keycode for AID byte. */
+		kbd_keycode(tp->kbd, 256 + tp->input->string[0]);
+	}
+
+	raw3270_request_reset(rrq);
+	xchg(&tp->read, rrq);
+	raw3270_put_view(&tp->view);
+}
+
+/*
+ * Read request completion callback.
+ */
+static void
+tty3270_read_callback(struct raw3270_request *rq, void *data)
+{
+	raw3270_get_view(rq->view);
+	/* Schedule tasklet to pass input to tty. */
+	tasklet_schedule(&((struct tty3270 *) rq->view)->readlet);
+}
+
+/*
+ * Issue a read request. Call with device lock.
+ */
+static void
+tty3270_issue_read(struct tty3270 *tp, int lock)
+{
+	struct raw3270_request *rrq;
+	int rc;
+
+	rrq = xchg(&tp->read, 0);
+	if (!rrq)
+		/* Read already scheduled. */
+		return;
+	rrq->callback = tty3270_read_callback;
+	rrq->callback_data = tp;
+	raw3270_request_set_cmd(rrq, TC_READMOD);
+	raw3270_request_set_data(rrq, tp->input->string, tp->input->len);
+	/* Issue the read modified request. */
+	if (lock) {
+		rc = raw3270_start(&tp->view, rrq);
+	} else
+		rc = raw3270_start_irq(&tp->view, rrq);
+	if (rc) {
+		raw3270_request_reset(rrq);
+		xchg(&tp->read, rrq);
+	}
+}
+
+/*
+ * Switch to the tty view.
+ */
+static int
+tty3270_activate(struct raw3270_view *view)
+{
+	struct tty3270 *tp;
+	unsigned long flags;
+
+	tp = (struct tty3270 *) view;
+	spin_lock_irqsave(&tp->view.lock, flags);
+	tp->nr_up = 0;
+	tty3270_rebuild_update(tp);
+	tty3270_update_status(tp);
+	tp->update_flags = TTY_UPDATE_ALL;
+	tty3270_set_timer(tp, 1);
+	spin_unlock_irqrestore(&tp->view.lock, flags);
+	start_tty(tp->tty);
+	return 0;
+}
+
+static void
+tty3270_deactivate(struct raw3270_view *view)
+{
+	struct tty3270 *tp;
+
+	tp = (struct tty3270 *) view;
+	if (tp && tp->tty)
+		stop_tty(tp->tty);
+}
+
+static int
+tty3270_irq(struct tty3270 *tp, struct raw3270_request *rq, struct irb *irb)
+{
+	/* Handle ATTN. Schedule tasklet to read aid. */
+	if (irb->scsw.dstat & DEV_STAT_ATTENTION) {
+		if (!tp->throttle)
+			tty3270_issue_read(tp, 0);
+		else
+			tp->attn = 1;
+	}
+
+	if (rq) {
+		if (irb->scsw.dstat & DEV_STAT_UNIT_CHECK)
+			rq->rc = -EIO;
+		else
+			/* Normal end. Copy residual count. */
+			rq->rescnt = irb->scsw.count;
+	}
+	return RAW3270_IO_DONE;
+}
+
+/*
+ * Allocate tty3270 structure.
+ */
+static struct tty3270 *
+tty3270_alloc_view(void)
+{
+	struct tty3270 *tp;
+	int pages;
+
+	tp = kmalloc(sizeof(struct tty3270),GFP_KERNEL);
+	if (!tp)
+		goto out_err;
+	memset(tp, 0, sizeof(struct tty3270));
+	tp->freemem_pages =
+		kmalloc(sizeof(void *) * TTY3270_STRING_PAGES, GFP_KERNEL);
+	if (!tp->freemem_pages)
+		goto out_tp;
+	INIT_LIST_HEAD(&tp->freemem);
+	init_timer(&tp->timer);
+	for (pages = 0; pages < TTY3270_STRING_PAGES; pages++) {
+		tp->freemem_pages[pages] = (void *)
+			__get_free_pages(GFP_KERNEL|GFP_DMA, 0);
+		if (!tp->freemem_pages[pages])
+			goto out_pages;
+		add_string_memory(&tp->freemem,
+				  tp->freemem_pages[pages], PAGE_SIZE);
+	}
+	tp->write = raw3270_request_alloc(TTY3270_OUTPUT_BUFFER_SIZE);
+	if (!tp->write)
+		goto out_pages;
+	tp->read = raw3270_request_alloc(0);
+	if (!tp->read)
+		goto out_write;
+	tp->kreset = raw3270_request_alloc(1);
+	if (!tp->kreset)
+		goto out_read;
+	tp->kbd = kbd_alloc();
+	if (!tp->kbd)
+		goto out_reset;
+	return tp;
+
+out_reset:
+	raw3270_request_free(tp->kreset);
+out_read:
+	raw3270_request_free(tp->read);
+out_write:
+	raw3270_request_free(tp->write);
+out_pages:
+	while (pages--)
+		free_pages((unsigned long) tp->freemem_pages[pages], 0);
+	kfree(tp->freemem_pages);
+out_tp:
+	kfree(tp);
+out_err:
+	return ERR_PTR(-ENOMEM);
+}
+
+/*
+ * Free tty3270 structure.
+ */
+static void
+tty3270_free_view(struct tty3270 *tp)
+{
+	int pages;
+
+	kbd_free(tp->kbd);
+	raw3270_request_free(tp->kreset);
+	raw3270_request_free(tp->read);
+	raw3270_request_free(tp->write);
+	for (pages = 0; pages < TTY3270_STRING_PAGES; pages++)
+		free_pages((unsigned long) tp->freemem_pages[pages], 0);
+	kfree(tp->freemem_pages);
+	kfree(tp);
+}
+
+/*
+ * Allocate tty3270 screen.
+ */
+static int
+tty3270_alloc_screen(struct tty3270 *tp)
+{
+	unsigned long size;
+	int lines;
+
+	size = sizeof(struct tty3270_line) * (tp->view.rows - 2);
+	tp->screen = kmalloc(size, GFP_KERNEL);
+	if (!tp->screen)
+		goto out_err;
+	memset(tp->screen, 0, size);
+	for (lines = 0; lines < tp->view.rows - 2; lines++) {
+		size = sizeof(struct tty3270_cell) * tp->view.cols;
+		tp->screen[lines].cells = kmalloc(size, GFP_KERNEL);
+		if (!tp->screen[lines].cells)
+			goto out_screen;
+		memset(tp->screen[lines].cells, 0, size);
+	}
+	return 0;
+out_screen:
+	while (lines--)
+		kfree(tp->screen[lines].cells);
+	kfree(tp->screen);
+out_err:
+	return -ENOMEM;
+}
+
+/*
+ * Free tty3270 screen.
+ */
+static void
+tty3270_free_screen(struct tty3270 *tp)
+{
+	int lines;
+
+	for (lines = 0; lines < tp->view.rows - 2; lines++)
+		kfree(tp->screen[lines].cells);
+	kfree(tp->screen);
+}
+
+/*
+ * Unlink tty3270 data structure from tty.
+ */
+static void
+tty3270_release(struct raw3270_view *view)
+{
+	struct tty3270 *tp;
+	struct tty_struct *tty;
+
+	tp = (struct tty3270 *) view;
+	tty = tp->tty;
+	if (tty) {
+		tty->driver_data = 0;
+		tp->tty = tp->kbd->tty = 0;
+		tty_hangup(tty);
+		raw3270_put_view(&tp->view);
+	}
+}
+
+/*
+ * Free tty3270 data structure
+ */
+static void
+tty3270_free(struct raw3270_view *view)
+{
+	tty3270_free_screen((struct tty3270 *) view);
+	tty3270_free_view((struct tty3270 *) view);
+}
+
+/*
+ * Delayed freeing of tty3270 views.
+ */
+static void
+tty3270_del_views(void)
+{
+	struct tty3270 *tp;
+	int i;
+
+	for (i = 0; i < tty3270_max_index; i++) {
+		tp = (struct tty3270 *) raw3270_find_view(&tty3270_fn, i);
+		if (!IS_ERR(tp))
+			raw3270_del_view(&tp->view);
+	}
+}
+
+struct raw3270_fn tty3270_fn = {
+	.activate = tty3270_activate,
+	.deactivate = tty3270_deactivate,
+	.intv = (void *) tty3270_irq,
+	.release = tty3270_release,
+	.free = tty3270_free
+};
+
+/*
+ * This routine is called whenever a 3270 tty is opened.
+ */
+static int
+tty3270_open(struct tty_struct *tty, struct file * filp)
+{
+	struct tty3270 *tp;
+	int i, rc;
+
+	if (tty->count > 1)
+		return 0;
+	/* Check if the tty3270 is already there. */
+	tp = (struct tty3270 *) raw3270_find_view(&tty3270_fn, tty->index);
+	if (!IS_ERR(tp)) {
+		tty->driver_data = tp;
+		tty->winsize.ws_row = tp->view.rows - 2;
+		tty->winsize.ws_col = tp->view.cols;
+		tty->low_latency = 0;
+		tp->tty = tty;
+		tp->kbd->tty = tty;
+		tp->inattr = TF_INPUT;
+		return 0;
+	}
+	if (tty3270_max_index < tty->index + 1)
+		tty3270_max_index = tty->index + 1;
+
+	/* Quick exit if there is no device for tty->index. */
+	if (PTR_ERR(tp) == -ENODEV)
+		return -ENODEV;
+
+	/* Allocate tty3270 structure on first open. */
+	tp = tty3270_alloc_view();
+	if (IS_ERR(tp))
+		return PTR_ERR(tp);
+
+	INIT_LIST_HEAD(&tp->lines);
+	INIT_LIST_HEAD(&tp->update);
+	INIT_LIST_HEAD(&tp->rcl_lines);
+	tp->rcl_max = 20;
+	init_timer(&tp->timer);
+	tasklet_init(&tp->readlet, 
+		     (void (*)(unsigned long)) tty3270_read_tasklet,
+		     (unsigned long) tp->read);
+
+	rc = raw3270_add_view(&tp->view, &tty3270_fn, tty->index);
+	if (rc) {
+		tty3270_free_view(tp);
+		return rc;
+	}
+
+	rc = tty3270_alloc_screen(tp);
+	if (rc) {
+		raw3270_del_view(&tp->view);
+		raw3270_put_view(&tp->view);
+		return rc;
+	}
+
+	tp->tty = tty;
+	tty->low_latency = 0;
+	tty->driver_data = tp;
+	tty->winsize.ws_row = tp->view.rows - 2;
+	tty->winsize.ws_col = tp->view.cols;
+
+	tty3270_create_prompt(tp);
+	tty3270_create_status(tp);
+	tty3270_update_status(tp);
+
+	/* Create blank line for every line in the tty output area. */
+	for (i = 0; i < tp->view.rows - 2; i++)
+		tty3270_blank_line(tp);
+
+	tp->kbd->tty = tty;
+	tp->kbd->fn_handler[KVAL(K_INCRCONSOLE)] = tty3270_exit_tty;
+	tp->kbd->fn_handler[KVAL(K_SCROLLBACK)] = tty3270_scroll_backward;
+	tp->kbd->fn_handler[KVAL(K_SCROLLFORW)] = tty3270_scroll_forward;
+	tp->kbd->fn_handler[KVAL(K_CONS)] = tty3270_rcl_backward;
+	kbd_ascebc(tp->kbd, tp->view.ascebc);
+
+	raw3270_activate_view(&tp->view);
+	return 0;
+}
+
+/*
+ * This routine is called when the 3270 tty is closed. We wait
+ * for the remaining request to be completed. Then we clean up.
+ */
+static void
+tty3270_close(struct tty_struct *tty, struct file * filp)
+{
+	struct tty3270 *tp;
+
+	if (tty->count > 1)
+		return;
+	tp = (struct tty3270 *) tty->driver_data;
+	if (tp) {
+		tty->driver_data = 0;
+		tp->tty = tp->kbd->tty = 0;
+		raw3270_put_view(&tp->view);
+	}
+}
+
+/*
+ * We always have room.
+ */
+static int
+tty3270_write_room(struct tty_struct *tty)
+{
+	return INT_MAX;
+}
+
+/*
+ * Insert character into the screen at the current position with the
+ * current color and highlight. This function does NOT do cursor movement.
+ */
+static void
+tty3270_put_character(struct tty3270 *tp, char ch)
+{
+	struct tty3270_line *line;
+	struct tty3270_cell *cell;
+
+	line = tp->screen + tp->cy;
+	if (line->len <= tp->cx) {
+		while (line->len < tp->cx) {
+			cell = line->cells + line->len;
+			cell->character = tp->view.ascebc[' '];
+			cell->highlight = tp->highlight;
+			cell->f_color = tp->f_color;
+			line->len++;
+		}
+		line->len++;
+	}
+	cell = line->cells + tp->cx;
+	cell->character = tp->view.ascebc[(unsigned int) ch];
+	cell->highlight = tp->highlight;
+	cell->f_color = tp->f_color;
+}
+
+/*
+ * Convert a tty3270_line to a 3270 data fragment usable for output.
+ */
+static void
+tty3270_convert_line(struct tty3270 *tp, int line_nr)
+{
+	struct tty3270_line *line;
+	struct tty3270_cell *cell;
+	struct string *s, *n;
+	unsigned char highlight;
+	unsigned char f_color;
+	char *cp;
+	int flen, i;
+
+	/* Determine how long the fragment will be. */
+	flen = 3;		/* Prefix (TO_SBA). */
+	line = tp->screen + line_nr;
+	flen += line->len;
+	highlight = TAX_RESET;
+	f_color = TAC_RESET;
+	for (i = 0, cell = line->cells; i < line->len; i++, cell++) {
+		if (cell->highlight != highlight) {
+			flen += 3;	/* TO_SA to switch highlight. */
+			highlight = cell->highlight;
+		}
+		if (cell->f_color != f_color) {
+			flen += 3;	/* TO_SA to switch color. */
+			f_color = cell->f_color;
+		}
+	}
+	if (highlight != TAX_RESET)
+		flen += 3;	/* TO_SA to reset hightlight. */
+	if (f_color != TAC_RESET)
+		flen += 3;	/* TO_SA to reset color. */
+	if (line->len < tp->view.cols)
+		flen += 4;	/* Postfix (TO_RA). */
+
+	/* Find the line in the list. */
+	i = tp->view.rows - 2 - line_nr;
+	list_for_each_entry_reverse(s, &tp->lines, list)
+		if (--i <= 0)
+			break;
+	/*
+	 * Check if the line needs to get reallocated.
+	 */
+	if (s->len != flen) {
+		/* Reallocate string. */
+		n = tty3270_alloc_string(tp, flen);
+		list_add(&n->list, &s->list);
+		list_del_init(&s->list);
+		if (!list_empty(&s->update))
+			list_del_init(&s->update);
+		free_string(&tp->freemem, s);
+		s = n;
+	}
+
+	/* Write 3270 data fragment. */
+	cp = s->string;
+	*cp++ = TO_SBA;
+	*cp++ = 0;
+	*cp++ = 0;
+
+	highlight = TAX_RESET;
+	f_color = TAC_RESET;
+	for (i = 0, cell = line->cells; i < line->len; i++, cell++) {
+		if (cell->highlight != highlight) {
+			*cp++ = TO_SA;
+			*cp++ = TAT_EXTHI;
+			*cp++ = cell->highlight;
+			highlight = cell->highlight;
+		}
+		if (cell->f_color != f_color) {
+			*cp++ = TO_SA;
+			*cp++ = TAT_COLOR;
+			*cp++ = cell->f_color;
+			f_color = cell->f_color;
+		}
+		*cp++ = cell->character;
+	}
+	if (highlight != TAX_RESET) {
+		*cp++ = TO_SA;
+		*cp++ = TAT_EXTHI;
+		*cp++ = TAX_RESET;
+	}
+	if (f_color != TAC_RESET) {
+		*cp++ = TO_SA;
+		*cp++ = TAT_COLOR;
+		*cp++ = TAC_RESET;
+	}
+	if (line->len < tp->view.cols) {
+		*cp++ = TO_RA;
+		*cp++ = 0;
+		*cp++ = 0;
+		*cp++ = 0;
+	}
+
+	if (tp->nr_up + line_nr < tp->view.rows - 2) {
+		/* Line is currently visible on screen. */
+		tty3270_update_string(tp, s, line_nr);
+		/* Add line to update list. */
+		if (list_empty(&s->update)) {
+			list_add_tail(&s->update, &tp->update);
+			tp->update_flags |= TTY_UPDATE_LIST;
+		}
+	}
+}
+
+/*
+ * Do carriage return.
+ */
+static void
+tty3270_cr(struct tty3270 *tp)
+{
+	tp->cx = 0;
+}
+
+/*
+ * Do line feed.
+ */
+static void
+tty3270_lf(struct tty3270 *tp)
+{
+	struct tty3270_line temp;
+	int i;
+
+	tty3270_convert_line(tp, tp->cy);
+	if (tp->cy < tp->view.rows - 3) {
+		tp->cy++;
+		return;
+	}
+	/* Last line just filled up. Add new, blank line. */
+	tty3270_blank_line(tp);
+	temp = tp->screen[0];
+	temp.len = 0;
+	for (i = 0; i < tp->view.rows - 3; i++)
+		tp->screen[i] = tp->screen[i+1];
+	tp->screen[tp->view.rows - 3] = temp;
+	tty3270_rebuild_update(tp);
+}
+
+static void
+tty3270_ri(struct tty3270 *tp)
+{
+	if (tp->cy > 0) {
+	    tty3270_convert_line(tp, tp->cy);
+	    tp->cy--;
+	}
+}
+
+/*
+ * Insert characters at current position.
+ */
+static void
+tty3270_insert_characters(struct tty3270 *tp, int n)
+{
+	struct tty3270_line *line;
+	int k;
+
+	line = tp->screen + tp->cy;
+	while (line->len < tp->cx) {
+		line->cells[line->len].character = tp->view.ascebc[' '];
+		line->cells[line->len].highlight = TAX_RESET;
+		line->cells[line->len].f_color = TAC_RESET;
+		line->len++;
+	}
+	if (n > tp->view.cols - tp->cx)
+		n = tp->view.cols - tp->cx;
+	k = min_t(int, line->len - tp->cx, tp->view.cols - tp->cx - n);
+	while (k--)
+		line->cells[tp->cx + n + k] = line->cells[tp->cx + k];
+	line->len += n;
+	if (line->len > tp->view.cols)
+		line->len = tp->view.cols;
+	while (n-- > 0) {
+		line->cells[tp->cx + n].character = tp->view.ascebc[' '];
+		line->cells[tp->cx + n].highlight = tp->highlight;
+		line->cells[tp->cx + n].f_color = tp->f_color;
+	}
+}
+
+/*
+ * Delete characters at current position.
+ */
+static void
+tty3270_delete_characters(struct tty3270 *tp, int n)
+{
+	struct tty3270_line *line;
+	int i;
+
+	line = tp->screen + tp->cy;
+	if (line->len <= tp->cx)
+		return;
+	if (line->len - tp->cx <= n) {
+		line->len = tp->cx;
+		return;
+	}
+	for (i = tp->cx; i + n < line->len; i++)
+		line->cells[i] = line->cells[i + n];
+	line->len -= n;
+}
+
+/*
+ * Erase characters at current position.
+ */
+static void
+tty3270_erase_characters(struct tty3270 *tp, int n)
+{
+	struct tty3270_line *line;
+	struct tty3270_cell *cell;
+
+	line = tp->screen + tp->cy;
+	while (line->len > tp->cx && n-- > 0) {
+		cell = line->cells + tp->cx++;
+		cell->character = ' ';
+		cell->highlight = TAX_RESET;
+		cell->f_color = TAC_RESET;
+	}
+	tp->cx += n;
+	tp->cx = min_t(int, tp->cx, tp->view.cols - 1);
+}
+
+/*
+ * Erase line, 3 different cases:
+ *  Esc [ 0 K	Erase from current position to end of line inclusive
+ *  Esc [ 1 K	Erase from beginning of line to current position inclusive
+ *  Esc [ 2 K	Erase entire line (without moving cursor)
+ */
+static void
+tty3270_erase_line(struct tty3270 *tp, int mode)
+{
+	struct tty3270_line *line;
+	struct tty3270_cell *cell;
+	int i;
+
+	line = tp->screen + tp->cy;
+	if (mode == 0)
+		line->len = tp->cx;
+	else if (mode == 1) {
+		for (i = 0; i < tp->cx; i++) {
+			cell = line->cells + i;
+			cell->character = ' ';
+			cell->highlight = TAX_RESET;
+			cell->f_color = TAC_RESET;
+		}
+		if (line->len <= tp->cx)
+			line->len = tp->cx + 1;
+	} else if (mode == 2)
+		line->len = 0;
+	tty3270_convert_line(tp, tp->cy);
+}
+
+/*
+ * Erase display, 3 different cases:
+ *  Esc [ 0 J	Erase from current position to bottom of screen inclusive
+ *  Esc [ 1 J	Erase from top of screen to current position inclusive
+ *  Esc [ 2 J	Erase entire screen (without moving the cursor)
+ */
+static void
+tty3270_erase_display(struct tty3270 *tp, int mode)
+{
+	int i;
+
+	if (mode == 0) {
+		tty3270_erase_line(tp, 0);
+		for (i = tp->cy + 1; i < tp->view.rows - 2; i++) {
+			tp->screen[i].len = 0;
+			tty3270_convert_line(tp, i);
+		}
+	} else if (mode == 1) {
+		for (i = 0; i < tp->cy; i++) {
+			tp->screen[i].len = 0;
+			tty3270_convert_line(tp, i);
+		}
+		tty3270_erase_line(tp, 1);
+	} else if (mode == 2) {
+		for (i = 0; i < tp->view.rows - 2; i++) {
+			tp->screen[i].len = 0;
+			tty3270_convert_line(tp, i);
+		}
+	}
+	tty3270_rebuild_update(tp);
+}
+
+/*
+ * Set attributes found in an escape sequence.
+ *  Esc [ <attr> ; <attr> ; ... m
+ */
+static void
+tty3270_set_attributes(struct tty3270 *tp)
+{
+	static unsigned char f_colors[] = {
+		TAC_DEFAULT, TAC_RED, TAC_GREEN, TAC_YELLOW, TAC_BLUE,
+		TAC_PINK, TAC_TURQ, TAC_WHITE, 0, TAC_DEFAULT
+	};
+	int i, attr;
+
+	for (i = 0; i <= tp->esc_npar; i++) {
+		attr = tp->esc_par[i];
+		switch (attr) {
+		case 0:		/* Reset */
+			tp->highlight = TAX_RESET;
+			tp->f_color = TAC_RESET;
+			break;
+		/* Highlight. */
+		case 4:		/* Start underlining. */
+			tp->highlight = TAX_UNDER;
+			break;
+		case 5:		/* Start blink. */
+			tp->highlight = TAX_BLINK;
+			break;
+		case 7:		/* Start reverse. */
+			tp->highlight = TAX_REVER;
+			break;
+		case 24:	/* End underlining */
+			if (tp->highlight == TAX_UNDER)
+				tp->highlight = TAX_RESET;
+			break;
+		case 25:	/* End blink. */
+			if (tp->highlight == TAX_BLINK)
+				tp->highlight = TAX_RESET;
+			break;
+		case 27:	/* End reverse. */
+			if (tp->highlight == TAX_REVER)
+				tp->highlight = TAX_RESET;
+			break;
+		/* Foreground color. */
+		case 30:	/* Black */
+		case 31:	/* Red */
+		case 32:	/* Green */
+		case 33:	/* Yellow */
+		case 34:	/* Blue */
+		case 35:	/* Magenta */
+		case 36:	/* Cyan */
+		case 37:	/* White */
+		case 39:	/* Black */
+			tp->f_color = f_colors[attr - 30];
+			break;
+		}
+	}
+}
+
+static inline int
+tty3270_getpar(struct tty3270 *tp, int ix)
+{
+	return (tp->esc_par[ix] > 0) ? tp->esc_par[ix] : 1;
+}
+
+static void
+tty3270_goto_xy(struct tty3270 *tp, int cx, int cy)
+{
+	tp->cx = min_t(int, tp->view.cols - 1, max_t(int, 0, cx));
+	cy = min_t(int, tp->view.rows - 3, max_t(int, 0, cy));
+	if (cy != tp->cy) {
+		tty3270_convert_line(tp, tp->cy);
+		tp->cy = cy;
+	}
+}
+
+/*
+ * Process escape sequences. Known sequences:
+ *  Esc 7			Save Cursor Position
+ *  Esc 8			Restore Cursor Position
+ *  Esc [ Pn ; Pn ; .. m	Set attributes
+ *  Esc [ Pn ; Pn H		Cursor Position
+ *  Esc [ Pn ; Pn f		Cursor Position
+ *  Esc [ Pn A			Cursor Up
+ *  Esc [ Pn B			Cursor Down
+ *  Esc [ Pn C			Cursor Forward
+ *  Esc [ Pn D			Cursor Backward
+ *  Esc [ Pn G			Cursor Horizontal Absolute
+ *  Esc [ Pn X			Erase Characters
+ *  Esc [ Ps J			Erase in Display
+ *  Esc [ Ps K			Erase in Line
+ * // FIXME: add all the new ones.
+ *
+ *  Pn is a numeric parameter, a string of zero or more decimal digits.
+ *  Ps is a selective parameter.
+ */
+static void
+tty3270_escape_sequence(struct tty3270 *tp, char ch)
+{
+	enum { ESnormal, ESesc, ESsquare, ESgetpars };
+
+	if (tp->esc_state == ESnormal) {
+		if (ch == 0x1b)
+			/* Starting new escape sequence. */
+			tp->esc_state = ESesc;
+		return;
+	}
+	if (tp->esc_state == ESesc) {
+		tp->esc_state = ESnormal;
+		switch (ch) {
+		case '[':
+			tp->esc_state = ESsquare;
+			break;
+		case 'E':
+			tty3270_cr(tp);
+			tty3270_lf(tp);
+			break;
+		case 'M':
+			tty3270_ri(tp);
+			break;
+		case 'D':
+			tty3270_lf(tp);
+			break;
+		case 'Z':		/* Respond ID. */
+			kbd_puts_queue(tp->tty, "\033[?6c");
+			break;
+		case '7':		/* Save cursor position. */
+			tp->saved_cx = tp->cx;
+			tp->saved_cy = tp->cy;
+			tp->saved_highlight = tp->highlight;
+			tp->saved_f_color = tp->f_color;
+			break;
+		case '8':		/* Restore cursor position. */
+			tty3270_convert_line(tp, tp->cy);
+			tty3270_goto_xy(tp, tp->saved_cx, tp->saved_cy);
+			tp->highlight = tp->saved_highlight;
+			tp->f_color = tp->saved_f_color;
+			break;
+		case 'c':		/* Reset terminal. */
+			tp->cx = tp->saved_cx = 0;
+			tp->cy = tp->saved_cy = 0;
+			tp->highlight = tp->saved_highlight = TAX_RESET;
+			tp->f_color = tp->saved_f_color = TAC_RESET;
+			tty3270_erase_display(tp, 2);
+			break;
+		}
+		return;
+	}
+	if (tp->esc_state == ESsquare) {
+		tp->esc_state = ESgetpars;
+		memset(tp->esc_par, 0, sizeof(tp->esc_par));
+		tp->esc_npar = 0;
+		tp->esc_ques = (ch == '?');
+		if (tp->esc_ques)
+			return;
+	}
+	if (tp->esc_state == ESgetpars) {
+		if (ch == ';' && tp->esc_npar < ESCAPE_NPAR - 1) {
+			tp->esc_npar++;
+			return;
+		}
+		if (ch >= '0' && ch <= '9') {
+			tp->esc_par[tp->esc_npar] *= 10;
+			tp->esc_par[tp->esc_npar] += ch - '0';
+			return;
+		}
+	}
+	tp->esc_state = ESnormal;
+	if (ch == 'n' && !tp->esc_ques) {
+		if (tp->esc_par[0] == 5)		/* Status report. */
+			kbd_puts_queue(tp->tty, "\033[0n");
+		else if (tp->esc_par[0] == 6) {	/* Cursor report. */
+			char buf[40];
+			sprintf(buf, "\033[%d;%dR", tp->cy + 1, tp->cx + 1);
+			kbd_puts_queue(tp->tty, buf);
+		}
+		return;
+	}
+	if (tp->esc_ques)
+		return;
+	switch (ch) {
+	case 'm':
+		tty3270_set_attributes(tp);
+		break;
+	case 'H':	/* Set cursor position. */
+	case 'f':
+		tty3270_goto_xy(tp, tty3270_getpar(tp, 1) - 1,
+				tty3270_getpar(tp, 0) - 1);
+		break;
+	case 'd':	/* Set y position. */
+		tty3270_goto_xy(tp, tp->cx, tty3270_getpar(tp, 0) - 1);
+		break;
+	case 'A':	/* Cursor up. */
+	case 'F':
+		tty3270_goto_xy(tp, tp->cx, tp->cy - tty3270_getpar(tp, 0));
+		break;
+	case 'B':	/* Cursor down. */
+	case 'e':
+	case 'E':
+		tty3270_goto_xy(tp, tp->cx, tp->cy + tty3270_getpar(tp, 0));
+		break;
+	case 'C':	/* Cursor forward. */
+	case 'a':
+		tty3270_goto_xy(tp, tp->cx + tty3270_getpar(tp, 0), tp->cy);
+		break;
+	case 'D':	/* Cursor backward. */
+		tty3270_goto_xy(tp, tp->cx - tty3270_getpar(tp, 0), tp->cy);
+		break;
+	case 'G':	/* Set x position. */
+	case '`':
+		tty3270_goto_xy(tp, tty3270_getpar(tp, 0), tp->cy);
+		break;
+	case 'X':	/* Erase Characters. */
+		tty3270_erase_characters(tp, tty3270_getpar(tp, 0));
+		break;
+	case 'J':	/* Erase display. */
+		tty3270_erase_display(tp, tp->esc_par[0]);
+		break;
+	case 'K':	/* Erase line. */
+		tty3270_erase_line(tp, tp->esc_par[0]);
+		break;
+	case 'P':	/* Delete characters. */
+		tty3270_delete_characters(tp, tty3270_getpar(tp, 0));
+		break;
+	case '@':	/* Insert characters. */
+		tty3270_insert_characters(tp, tty3270_getpar(tp, 0));
+		break;
+	case 's':	/* Save cursor position. */
+		tp->saved_cx = tp->cx;
+		tp->saved_cy = tp->cy;
+		tp->saved_highlight = tp->highlight;
+		tp->saved_f_color = tp->f_color;
+		break;
+	case 'u':	/* Restore cursor position. */
+		tty3270_convert_line(tp, tp->cy);
+		tty3270_goto_xy(tp, tp->saved_cx, tp->saved_cy);
+		tp->highlight = tp->saved_highlight;
+		tp->f_color = tp->saved_f_color;
+		break;
+	}
+}
+
+/*
+ * String write routine for 3270 ttys
+ */
+static void
+tty3270_do_write(struct tty3270 *tp, const unsigned char *buf, int count)
+{
+	int i_msg, i;
+
+	spin_lock_bh(&tp->view.lock);
+	for (i_msg = 0; !tp->tty->stopped && i_msg < count; i_msg++) {
+		if (tp->esc_state != 0) {
+			/* Continue escape sequence. */
+			tty3270_escape_sequence(tp, buf[i_msg]);
+			continue;
+		}
+
+		switch (buf[i_msg]) {
+		case 0x07:		/* '\a' -- Alarm */
+			tp->wcc |= TW_PLUSALARM;
+			break;
+		case 0x08:		/* Backspace. */
+			if (tp->cx > 0) {
+				tp->cx--;
+				tty3270_put_character(tp, ' ');
+			}
+			break;
+		case 0x09:		/* '\t' -- Tabulate */
+			for (i = tp->cx % 8; i < 8; i++) {
+				if (tp->cx >= tp->view.cols) {
+					tty3270_cr(tp);
+					tty3270_lf(tp);
+					break;
+				}
+				tty3270_put_character(tp, ' ');
+				tp->cx++;
+			}
+			break;
+		case 0x0a:		/* '\n' -- New Line */
+			tty3270_cr(tp);
+			tty3270_lf(tp);
+			break;
+		case 0x0c:		/* '\f' -- Form Feed */
+			tty3270_erase_display(tp, 2);
+			tp->cx = tp->cy = 0;
+			break;
+		case 0x0d:		/* '\r' -- Carriage Return */
+			tp->cx = 0;
+			break;
+		case 0x0f:		/* SuSE "exit alternate mode" */
+			break;
+		case 0x1b:		/* Start escape sequence. */
+			tty3270_escape_sequence(tp, buf[i_msg]);
+			break;
+		default:		/* Insert normal character. */
+			if (tp->cx >= tp->view.cols) {
+				tty3270_cr(tp);
+				tty3270_lf(tp);
+			}
+			tty3270_put_character(tp, buf[i_msg]);
+			tp->cx++;
+			break;
+		}
+	}
+	/* Convert current line to 3270 data fragment. */
+	tty3270_convert_line(tp, tp->cy);
+
+	/* Setup timer to update display after 1/10 second */
+	if (!timer_pending(&tp->timer))
+		tty3270_set_timer(tp, HZ/10);
+
+	spin_unlock_bh(&tp->view.lock);
+}
+
+/*
+ * String write routine for 3270 ttys
+ */
+static int
+tty3270_write(struct tty_struct * tty,
+	      const unsigned char *buf, int count)
+{
+	struct tty3270 *tp;
+
+	tp = tty->driver_data;
+	if (!tp)
+		return 0;
+	if (tp->char_count > 0) {
+		tty3270_do_write(tp, tp->char_buf, tp->char_count);
+		tp->char_count = 0;
+	}
+	tty3270_do_write(tp, buf, count);
+	return count;
+}
+
+/*
+ * Put single characters to the ttys character buffer
+ */
+static void
+tty3270_put_char(struct tty_struct *tty, unsigned char ch)
+{
+	struct tty3270 *tp;
+
+	tp = tty->driver_data;
+	if (!tp)
+		return;
+	if (tp->char_count < TTY3270_CHAR_BUF_SIZE)
+		tp->char_buf[tp->char_count++] = ch;
+}
+
+/*
+ * Flush all characters from the ttys characeter buffer put there
+ * by tty3270_put_char.
+ */
+static void
+tty3270_flush_chars(struct tty_struct *tty)
+{
+	struct tty3270 *tp;
+
+	tp = tty->driver_data;
+	if (!tp)
+		return;
+	if (tp->char_count > 0) {
+		tty3270_do_write(tp, tp->char_buf, tp->char_count);
+		tp->char_count = 0;
+	}
+}
+
+/*
+ * Returns the number of characters in the output buffer. This is
+ * used in tty_wait_until_sent to wait until all characters have
+ * appeared on the screen.
+ */
+static int
+tty3270_chars_in_buffer(struct tty_struct *tty)
+{
+	return 0;
+}
+
+static void
+tty3270_flush_buffer(struct tty_struct *tty)
+{
+}
+
+/*
+ * Check for visible/invisible input switches
+ */
+static void
+tty3270_set_termios(struct tty_struct *tty, struct termios *old)
+{
+	struct tty3270 *tp;
+	int new;
+
+	tp = tty->driver_data;
+	if (!tp)
+		return;
+	spin_lock_bh(&tp->view.lock);
+	if (L_ICANON(tty)) {
+		new = L_ECHO(tty) ? TF_INPUT: TF_INPUTN;
+		if (new != tp->inattr) {
+			tp->inattr = new;
+			tty3270_update_prompt(tp, 0, 0);
+			tty3270_set_timer(tp, 1);
+		}
+	}
+	spin_unlock_bh(&tp->view.lock);
+}
+
+/*
+ * Disable reading from a 3270 tty
+ */
+static void
+tty3270_throttle(struct tty_struct * tty)
+{
+	struct tty3270 *tp;
+
+	tp = tty->driver_data;
+	if (!tp)
+		return;
+	tp->throttle = 1;
+}
+
+/*
+ * Enable reading from a 3270 tty
+ */
+static void
+tty3270_unthrottle(struct tty_struct * tty)
+{
+	struct tty3270 *tp;
+
+	tp = tty->driver_data;
+	if (!tp)
+		return;
+	tp->throttle = 0;
+	if (tp->attn)
+		tty3270_issue_read(tp, 1);
+}
+
+/*
+ * Hang up the tty device.
+ */
+static void
+tty3270_hangup(struct tty_struct *tty)
+{
+	// FIXME: implement
+}
+
+static void
+tty3270_wait_until_sent(struct tty_struct *tty, int timeout)
+{
+}
+
+static int
+tty3270_ioctl(struct tty_struct *tty, struct file *file,
+	      unsigned int cmd, unsigned long arg)
+{
+	struct tty3270 *tp;
+
+	tp = tty->driver_data;
+	if (!tp)
+		return -ENODEV;
+	if (tty->flags & (1 << TTY_IO_ERROR))
+		return -EIO;
+	return kbd_ioctl(tp->kbd, file, cmd, arg);
+}
+
+static struct tty_operations tty3270_ops = {
+	.open = tty3270_open,
+	.close = tty3270_close,
+	.write = tty3270_write,
+	.put_char = tty3270_put_char,
+	.flush_chars = tty3270_flush_chars,
+	.write_room = tty3270_write_room,
+	.chars_in_buffer = tty3270_chars_in_buffer,
+	.flush_buffer = tty3270_flush_buffer,
+	.throttle = tty3270_throttle,
+	.unthrottle = tty3270_unthrottle,
+	.hangup = tty3270_hangup,
+	.wait_until_sent = tty3270_wait_until_sent,
+	.ioctl = tty3270_ioctl,
+	.set_termios = tty3270_set_termios
+};
+
+void
+tty3270_notifier(int index, int active)
+{
+	if (active)
+		tty_register_device(tty3270_driver, index, 0);
+	else
+		tty_unregister_device(tty3270_driver, index);
+}
+
+/*
+ * 3270 tty registration code called from tty_init().
+ * Most kernel services (incl. kmalloc) are available at this poimt.
+ */
+int __init
+tty3270_init(void)
+{
+	struct tty_driver *driver;
+	int ret;
+
+	driver = alloc_tty_driver(256);
+	if (!driver)
+		return -ENOMEM;
+
+	/*
+	 * Initialize the tty_driver structure
+	 * Entries in tty3270_driver that are NOT initialized:
+	 * proc_entry, set_termios, flush_buffer, set_ldisc, write_proc
+	 */
+	driver->owner = THIS_MODULE;
+	driver->devfs_name = "ttyTUB/";
+	driver->driver_name = "ttyTUB";
+	driver->name = "ttyTUB";
+	driver->major = IBM_TTY3270_MAJOR;
+	driver->type = TTY_DRIVER_TYPE_SYSTEM;
+	driver->subtype = SYSTEM_TYPE_TTY;
+	driver->init_termios = tty_std_termios;
+	driver->flags = TTY_DRIVER_RESET_TERMIOS | TTY_DRIVER_NO_DEVFS;
+	tty_set_operations(driver, &tty3270_ops);
+	ret = tty_register_driver(driver);
+	if (ret) {
+		printk(KERN_ERR "tty3270 registration failed with %d\n", ret);
+		put_tty_driver(driver);
+		return ret;
+	}
+	tty3270_driver = driver;
+	ret = raw3270_register_notifier(tty3270_notifier);
+	if (ret) {
+		printk(KERN_ERR "tty3270 notifier registration failed "
+		       "with %d\n", ret);
+		put_tty_driver(driver);
+		return ret;
+
+	}
+	return 0;
+}
+
+static void __exit
+tty3270_exit(void)
+{
+	struct tty_driver *driver;
+
+	raw3270_unregister_notifier(tty3270_notifier);
+	driver = tty3270_driver;
+	tty3270_driver = 0;
+	tty_unregister_driver(driver);
+	tty3270_del_views();
+}
+
+MODULE_LICENSE("GPL");
+MODULE_ALIAS_CHARDEV_MAJOR(IBM_TTY3270_MAJOR);
+
+module_init(tty3270_init);
+module_exit(tty3270_exit);
diff --git a/drivers/s390/char/vmlogrdr.c b/drivers/s390/char/vmlogrdr.c
new file mode 100644
index 0000000..edf50d2
--- /dev/null
+++ b/drivers/s390/char/vmlogrdr.c
@@ -0,0 +1,920 @@
+/*
+ * drivers/s390/char/vmlogrdr.c
+ *	character device driver for reading z/VM system service records
+ *
+ *
+ *	Copyright (C) 2004 IBM Corporation
+ *	character device driver for reading z/VM system service records,
+ *	Version 1.0
+ *	Author(s): Xenia Tkatschow <xenia@us.ibm.com>
+ *		   Stefan Weinhuber <wein@de.ibm.com>
+ *
+ */
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <asm/atomic.h>
+#include <asm/uaccess.h>
+#include <asm/cpcmd.h>
+#include <asm/debug.h>
+#include <asm/ebcdic.h>
+#include "../net/iucv.h"
+#include <linux/kmod.h>
+#include <linux/cdev.h>
+#include <linux/device.h>
+#include <linux/string.h>
+
+
+
+MODULE_AUTHOR
+	("(C) 2004 IBM Corporation by Xenia Tkatschow (xenia@us.ibm.com)\n"
+	 "                            Stefan Weinhuber (wein@de.ibm.com)");
+MODULE_DESCRIPTION ("Character device driver for reading z/VM "
+		    "system service records.");
+MODULE_LICENSE("GPL");
+
+
+/*
+ * The size of the buffer for iucv data transfer is one page,
+ * but in addition to the data we read from iucv we also
+ * place an integer and some characters into that buffer,
+ * so the maximum size for record data is a little less then
+ * one page.
+ */
+#define NET_BUFFER_SIZE	(PAGE_SIZE - sizeof(int) - sizeof(FENCE))
+
+/*
+ * The elements that are concurrently accessed by bottom halves are
+ * connection_established, iucv_path_severed, local_interrupt_buffer
+ * and receive_ready. The first three can be protected by
+ * priv_lock.  receive_ready is atomic, so it can be incremented and
+ * decremented without holding a lock.
+ * The variable dev_in_use needs to be protected by the lock, since
+ * it's a flag used by open to make sure that the device is opened only
+ * by one user at the same time.
+ */
+struct vmlogrdr_priv_t {
+	char system_service[8];
+	char internal_name[8];
+	char recording_name[8];
+	u16 pathid;
+	int connection_established;
+	int iucv_path_severed;
+	iucv_MessagePending local_interrupt_buffer;
+	atomic_t receive_ready;
+	iucv_handle_t iucv_handle;
+	int minor_num;
+	char * buffer;
+	char * current_position;
+	int remaining;
+	ulong residual_length;
+	int buffer_free;
+	int dev_in_use; /* 1: already opened, 0: not opened*/
+	spinlock_t priv_lock;
+	struct device  *device;
+	struct class_device  *class_device;
+	int autorecording;
+	int autopurge;
+};
+
+
+/*
+ * File operation structure for vmlogrdr devices
+ */
+static int vmlogrdr_open(struct inode *, struct file *);
+static int vmlogrdr_release(struct inode *, struct file *);
+static ssize_t vmlogrdr_read (struct file *filp, char *data, size_t count,
+			       loff_t * ppos);
+
+static struct file_operations vmlogrdr_fops = {
+	.owner   = THIS_MODULE,
+	.open    = vmlogrdr_open,
+	.release = vmlogrdr_release,
+	.read    = vmlogrdr_read,
+};
+
+
+static u8 iucvMagic[16] = {
+	0xF0, 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0x40,
+	0xF0, 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0x40
+};
+
+
+static u8 mask[] = {
+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff
+};
+
+
+static u8 iucv_host[8] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
+
+
+static void
+vmlogrdr_iucv_ConnectionComplete(iucv_ConnectionComplete *eib, void *pgm_data);
+static void
+vmlogrdr_iucv_ConnectionSevered(iucv_ConnectionSevered *eib, void *pgm_data);
+static void
+vmlogrdr_iucv_MessagePending(iucv_MessagePending *eib, void *pgm_data);
+
+
+static iucv_interrupt_ops_t vmlogrdr_iucvops = {
+	.ConnectionComplete = vmlogrdr_iucv_ConnectionComplete,
+	.ConnectionSevered  = vmlogrdr_iucv_ConnectionSevered,
+	.MessagePending     = vmlogrdr_iucv_MessagePending,
+};
+
+
+DECLARE_WAIT_QUEUE_HEAD(conn_wait_queue);
+DECLARE_WAIT_QUEUE_HEAD(read_wait_queue);
+
+/*
+ * pointer to system service private structure
+ * minor number 0 --> logrec
+ * minor number 1 --> account
+ * minor number 2 --> symptom
+ */
+
+static struct vmlogrdr_priv_t sys_ser[] = {
+	{ .system_service = "*LOGREC ",
+	  .internal_name  = "logrec",
+	  .recording_name = "EREP",
+	  .minor_num      = 0,
+	  .buffer_free    = 1,
+	  .priv_lock      = SPIN_LOCK_UNLOCKED,
+	  .autorecording  = 1,
+	  .autopurge      = 1,
+	},
+	{ .system_service = "*ACCOUNT",
+	  .internal_name  = "account",
+	  .recording_name = "ACCOUNT",
+	  .minor_num      = 1,
+	  .buffer_free    = 1,
+	  .priv_lock      = SPIN_LOCK_UNLOCKED,
+	  .autorecording  = 1,
+	  .autopurge      = 1,
+	},
+	{ .system_service = "*SYMPTOM",
+	  .internal_name  = "symptom",
+	  .recording_name = "SYMPTOM",
+	  .minor_num      = 2,
+	  .buffer_free    = 1,
+	  .priv_lock      = SPIN_LOCK_UNLOCKED,
+	  .autorecording  = 1,
+	  .autopurge      = 1,
+	}
+};
+
+#define MAXMINOR  (sizeof(sys_ser)/sizeof(struct vmlogrdr_priv_t))
+
+static char FENCE[] = {"EOR"};
+static int vmlogrdr_major = 0;
+static struct cdev  *vmlogrdr_cdev = NULL;
+static int recording_class_AB;
+
+
+static void
+vmlogrdr_iucv_ConnectionComplete (iucv_ConnectionComplete * eib,
+				   void * pgm_data)
+{
+	struct vmlogrdr_priv_t * logptr = pgm_data;
+	spin_lock(&logptr->priv_lock);
+	logptr->connection_established = 1;
+	spin_unlock(&logptr->priv_lock);
+	wake_up(&conn_wait_queue);
+	return;
+}
+
+
+static void
+vmlogrdr_iucv_ConnectionSevered (iucv_ConnectionSevered * eib, void * pgm_data)
+{
+	u8 reason = (u8) eib->ipuser[8];
+	struct vmlogrdr_priv_t * logptr = pgm_data;
+
+	printk (KERN_ERR "vmlogrdr: connection severed with"
+		" reason %i\n", reason);
+
+	spin_lock(&logptr->priv_lock);
+	logptr->connection_established = 0;
+	logptr->iucv_path_severed = 1;
+	spin_unlock(&logptr->priv_lock);
+
+	wake_up(&conn_wait_queue);
+	/* just in case we're sleeping waiting for a record */
+	wake_up_interruptible(&read_wait_queue);
+}
+
+
+static void
+vmlogrdr_iucv_MessagePending (iucv_MessagePending * eib, void * pgm_data)
+{
+	struct vmlogrdr_priv_t * logptr = pgm_data;
+
+	/*
+	 * This function is the bottom half so it should be quick.
+	 * Copy the external interrupt data into our local eib and increment
+	 * the usage count
+	 */
+	spin_lock(&logptr->priv_lock);
+	memcpy(&(logptr->local_interrupt_buffer), eib, sizeof(*eib));
+	atomic_inc(&logptr->receive_ready);
+	spin_unlock(&logptr->priv_lock);
+	wake_up_interruptible(&read_wait_queue);
+}
+
+
+static int
+vmlogrdr_get_recording_class_AB(void) {
+	char cp_command[]="QUERY COMMAND RECORDING ";
+	char cp_response[80];
+	char *tail;
+	int len,i;
+
+	printk (KERN_DEBUG "vmlogrdr: query command: %s\n", cp_command);
+	cpcmd(cp_command, cp_response, sizeof(cp_response));
+	printk (KERN_DEBUG "vmlogrdr: response: %s", cp_response);
+	len = strnlen(cp_response,sizeof(cp_response));
+	// now the parsing
+	tail=strnchr(cp_response,len,'=');
+	if (!tail)
+		return 0;
+	tail++;
+	if (!strncmp("ANY",tail,3))
+		return 1;
+	if (!strncmp("NONE",tail,4))
+		return 0;
+	/*
+	 * expect comma separated list of classes here, if one of them
+	 * is A or B return 1 otherwise 0
+	 */
+        for (i=tail-cp_response; i<len; i++)
+		if ( cp_response[i]=='A' || cp_response[i]=='B' )
+			return 1;
+	return 0;
+}
+
+
+static int
+vmlogrdr_recording(struct vmlogrdr_priv_t * logptr, int action, int purge) {
+
+	char cp_command[80];
+	char cp_response[160];
+	char *onoff, *qid_string;
+
+	memset(cp_command, 0x00, sizeof(cp_command));
+	memset(cp_response, 0x00, sizeof(cp_response));
+
+        onoff = ((action == 1) ? "ON" : "OFF");
+	qid_string = ((recording_class_AB == 1) ? " QID * " : "");
+
+        /*
+	 * The recording commands needs to be called with option QID
+	 * for guests that have previlege classes A or B.
+	 * Purging has to be done as separate step, because recording
+	 * can't be switched on as long as records are on the queue.
+	 * Doing both at the same time doesn't work.
+	 */
+
+	if (purge) {
+		snprintf(cp_command, sizeof(cp_command),
+			 "RECORDING %s PURGE %s",
+			 logptr->recording_name,
+			 qid_string);
+
+		printk (KERN_DEBUG "vmlogrdr: recording command: %s\n",
+			cp_command);
+		cpcmd(cp_command, cp_response, sizeof(cp_response));
+		printk (KERN_DEBUG "vmlogrdr: recording response: %s",
+			cp_response);
+	}
+
+	memset(cp_command, 0x00, sizeof(cp_command));
+	memset(cp_response, 0x00, sizeof(cp_response));
+	snprintf(cp_command, sizeof(cp_command), "RECORDING %s %s %s",
+		logptr->recording_name,
+		onoff,
+		qid_string);
+
+	printk (KERN_DEBUG "vmlogrdr: recording command: %s\n", cp_command);
+	cpcmd(cp_command, cp_response, sizeof(cp_response));
+	printk (KERN_DEBUG "vmlogrdr: recording response: %s",
+		cp_response);
+	/* The recording command will usually answer with 'Command complete'
+	 * on success, but when the specific service was never connected
+	 * before then there might be an additional informational message
+	 * 'HCPCRC8072I Recording entry not found' before the
+         * 'Command complete'. So I use strstr rather then the strncmp.
+	 */
+	if (strstr(cp_response,"Command complete"))
+		return 0;
+	else
+		return -EIO;
+
+}
+
+
+static int
+vmlogrdr_open (struct inode *inode, struct file *filp)
+{
+	int dev_num = 0;
+	struct vmlogrdr_priv_t * logptr = NULL;
+	int connect_rc = 0;
+	int ret;
+
+	dev_num = iminor(inode);
+	if (dev_num > MAXMINOR)
+		return -ENODEV;
+
+	logptr = &sys_ser[dev_num];
+	if (logptr == NULL)
+		return -ENODEV;
+
+	/*
+	 * only allow for blocking reads to be open
+	 */
+	if (filp->f_flags & O_NONBLOCK)
+		return -ENOSYS;
+
+	/* Besure this device hasn't already been opened */
+	spin_lock_bh(&logptr->priv_lock);
+	if (logptr->dev_in_use)	{
+		spin_unlock_bh(&logptr->priv_lock);
+		return -EBUSY;
+	} else {
+		logptr->dev_in_use = 1;
+		spin_unlock_bh(&logptr->priv_lock);
+	}
+
+	atomic_set(&logptr->receive_ready, 0);
+	logptr->buffer_free = 1;
+
+	/* set the file options */
+	filp->private_data = logptr;
+	filp->f_op = &vmlogrdr_fops;
+
+	/* start recording for this service*/
+	ret=0;
+	if (logptr->autorecording)
+		ret = vmlogrdr_recording(logptr,1,logptr->autopurge);
+	if (ret)
+		printk (KERN_WARNING "vmlogrdr: failed to start "
+			"recording automatically\n");
+
+	/* Register with iucv driver */
+	logptr->iucv_handle = iucv_register_program(iucvMagic,
+			logptr->system_service, mask, &vmlogrdr_iucvops,
+			logptr);
+
+	if (logptr->iucv_handle == NULL) {
+		printk (KERN_ERR "vmlogrdr: failed to register with"
+			"iucv driver\n");
+		goto not_registered;
+	}
+
+	/* create connection to the system service */
+	spin_lock_bh(&logptr->priv_lock);
+	logptr->connection_established = 0;
+	logptr->iucv_path_severed = 0;
+	spin_unlock_bh(&logptr->priv_lock);
+
+	connect_rc = iucv_connect (&(logptr->pathid), 10, iucvMagic,
+					logptr->system_service, iucv_host, 0,
+					NULL, NULL,
+					logptr->iucv_handle, NULL);
+	if (connect_rc) {
+		printk (KERN_ERR "vmlogrdr: iucv connection to %s "
+			"failed with rc %i \n", logptr->system_service,
+			connect_rc);
+		goto not_connected;
+	}
+
+	/* We've issued the connect and now we must wait for a
+	 * ConnectionComplete or ConnectinSevered Interrupt
+	 * before we can continue to process.
+	 */
+	wait_event(conn_wait_queue, (logptr->connection_established)
+		   || (logptr->iucv_path_severed));
+	if (logptr->iucv_path_severed) {
+		goto not_connected;
+	}
+
+ 	return nonseekable_open(inode, filp);
+
+not_connected:
+	iucv_unregister_program(logptr->iucv_handle);
+	logptr->iucv_handle = NULL;
+not_registered:
+	if (logptr->autorecording)
+		vmlogrdr_recording(logptr,0,logptr->autopurge);
+	logptr->dev_in_use = 0;
+	return -EIO;
+
+
+}
+
+
+static int
+vmlogrdr_release (struct inode *inode, struct file *filp)
+{
+	int ret;
+
+	struct vmlogrdr_priv_t * logptr = filp->private_data;
+
+	iucv_unregister_program(logptr->iucv_handle);
+	logptr->iucv_handle = NULL;
+
+	if (logptr->autorecording) {
+		ret = vmlogrdr_recording(logptr,0,logptr->autopurge);
+		if (ret)
+			printk (KERN_WARNING "vmlogrdr: failed to stop "
+				"recording automatically\n");
+	}
+	logptr->dev_in_use = 0;
+
+	return 0;
+}
+
+
+static int
+vmlogrdr_receive_data(struct vmlogrdr_priv_t *priv) {
+	int rc, *temp;
+	/* we need to keep track of two data sizes here:
+	 * The number of bytes we need to receive from iucv and
+	 * the total number of bytes we actually write into the buffer.
+	 */
+	int user_data_count, iucv_data_count;
+	char * buffer;
+
+	if (atomic_read(&priv->receive_ready)) {
+		spin_lock_bh(&priv->priv_lock);
+		if (priv->residual_length){
+			/* receive second half of a record */
+			iucv_data_count = priv->residual_length;
+			user_data_count = 0;
+			buffer = priv->buffer;
+		} else {
+			/* receive a new record:
+			 * We need to return the total length of the record
+                         * + size of FENCE in the first 4 bytes of the buffer.
+		         */
+			iucv_data_count =
+				priv->local_interrupt_buffer.ln1msg2.ipbfln1f;
+			user_data_count = sizeof(int);
+			temp = (int*)priv->buffer;
+			*temp= iucv_data_count + sizeof(FENCE);
+			buffer = priv->buffer + sizeof(int);
+		}
+		/*
+		 * If the record is bigger then our buffer, we receive only
+		 * a part of it. We can get the rest later.
+		 */
+		if (iucv_data_count > NET_BUFFER_SIZE)
+			iucv_data_count = NET_BUFFER_SIZE;
+		rc = iucv_receive(priv->pathid,
+				  priv->local_interrupt_buffer.ipmsgid,
+				  priv->local_interrupt_buffer.iptrgcls,
+				  buffer,
+				  iucv_data_count,
+				  NULL,
+				  NULL,
+				  &priv->residual_length);
+		spin_unlock_bh(&priv->priv_lock);
+		/* An rc of 5 indicates that the record was bigger then
+		 * the buffer, which is OK for us. A 9 indicates that the
+		 * record was purged befor we could receive it.
+		 */
+		if (rc == 5)
+			rc = 0;
+		if (rc == 9)
+			atomic_set(&priv->receive_ready, 0);
+	} else {
+		rc = 1;
+	}
+	if (!rc) {
+		priv->buffer_free = 0;
+ 		user_data_count += iucv_data_count;
+		priv->current_position = priv->buffer;
+		if (priv->residual_length == 0){
+			/* the whole record has been captured,
+			 * now add the fence */
+			atomic_dec(&priv->receive_ready);
+			buffer = priv->buffer + user_data_count;
+			memcpy(buffer, FENCE, sizeof(FENCE));
+			user_data_count += sizeof(FENCE);
+		}
+		priv->remaining = user_data_count;
+	}
+
+	return rc;
+}
+
+
+static ssize_t
+vmlogrdr_read (struct file *filp, char *data, size_t count, loff_t * ppos)
+{
+	int rc;
+	struct vmlogrdr_priv_t * priv = filp->private_data;
+
+	while (priv->buffer_free) {
+		rc = vmlogrdr_receive_data(priv);
+		if (rc) {
+			rc = wait_event_interruptible(read_wait_queue,
+					atomic_read(&priv->receive_ready));
+			if (rc)
+				return rc;
+		}
+	}
+	/* copy only up to end of record */
+	if (count > priv->remaining)
+		count = priv->remaining;
+
+	if (copy_to_user(data, priv->current_position, count))
+		return -EFAULT;
+
+	*ppos += count;
+	priv->current_position += count;
+	priv->remaining -= count;
+
+	/* if all data has been transferred, set buffer free */
+	if (priv->remaining == 0)
+		priv->buffer_free = 1;
+
+	return count;
+}
+
+static ssize_t
+vmlogrdr_autopurge_store(struct device * dev, const char * buf, size_t count) {
+	struct vmlogrdr_priv_t *priv = dev->driver_data;
+	ssize_t ret = count;
+
+	switch (buf[0]) {
+	case '0':
+		priv->autopurge=0;
+		break;
+	case '1':
+		priv->autopurge=1;
+		break;
+	default:
+		ret = -EINVAL;
+	}
+	return ret;
+}
+
+
+static ssize_t
+vmlogrdr_autopurge_show(struct device *dev, char *buf) {
+	struct vmlogrdr_priv_t *priv = dev->driver_data;
+	return sprintf(buf, "%u\n", priv->autopurge);
+}
+
+
+static DEVICE_ATTR(autopurge, 0644, vmlogrdr_autopurge_show,
+		   vmlogrdr_autopurge_store);
+
+
+static ssize_t
+vmlogrdr_purge_store(struct device * dev, const char * buf, size_t count) {
+
+	char cp_command[80];
+	char cp_response[80];
+	struct vmlogrdr_priv_t *priv = dev->driver_data;
+
+	if (buf[0] != '1')
+		return -EINVAL;
+
+	memset(cp_command, 0x00, sizeof(cp_command));
+	memset(cp_response, 0x00, sizeof(cp_response));
+
+        /*
+	 * The recording command needs to be called with option QID
+	 * for guests that have previlege classes A or B.
+	 * Other guests will not recognize the command and we have to
+	 * issue the same command without the QID parameter.
+	 */
+
+	if (recording_class_AB)
+		snprintf(cp_command, sizeof(cp_command),
+			 "RECORDING %s PURGE QID * ",
+			 priv->recording_name);
+	else
+		snprintf(cp_command, sizeof(cp_command),
+			 "RECORDING %s PURGE ",
+			 priv->recording_name);
+
+	printk (KERN_DEBUG "vmlogrdr: recording command: %s\n", cp_command);
+	cpcmd(cp_command, cp_response, sizeof(cp_response));
+	printk (KERN_DEBUG "vmlogrdr: recording response: %s",
+		cp_response);
+
+	return count;
+}
+
+
+static DEVICE_ATTR(purge, 0200, NULL, vmlogrdr_purge_store);
+
+
+static ssize_t
+vmlogrdr_autorecording_store(struct device *dev, const char *buf,
+			     size_t count) {
+	struct vmlogrdr_priv_t *priv = dev->driver_data;
+	ssize_t ret = count;
+
+	switch (buf[0]) {
+	case '0':
+		priv->autorecording=0;
+		break;
+	case '1':
+		priv->autorecording=1;
+		break;
+	default:
+		ret = -EINVAL;
+	}
+	return ret;
+}
+
+
+static ssize_t
+vmlogrdr_autorecording_show(struct device *dev, char *buf) {
+	struct vmlogrdr_priv_t *priv = dev->driver_data;
+	return sprintf(buf, "%u\n", priv->autorecording);
+}
+
+
+static DEVICE_ATTR(autorecording, 0644, vmlogrdr_autorecording_show,
+		   vmlogrdr_autorecording_store);
+
+
+static ssize_t
+vmlogrdr_recording_store(struct device * dev, const char * buf, size_t count) {
+
+	struct vmlogrdr_priv_t *priv = dev->driver_data;
+	ssize_t ret;
+
+	switch (buf[0]) {
+	case '0':
+		ret = vmlogrdr_recording(priv,0,0);
+		break;
+	case '1':
+		ret = vmlogrdr_recording(priv,1,0);
+		break;
+	default:
+		ret = -EINVAL;
+	}
+	if (ret)
+		return ret;
+	else
+		return count;
+
+}
+
+
+static DEVICE_ATTR(recording, 0200, NULL, vmlogrdr_recording_store);
+
+
+static ssize_t
+vmlogrdr_recording_status_show(struct device_driver *driver, char *buf) {
+
+	char cp_command[] = "QUERY RECORDING ";
+	int len;
+
+	cpcmd(cp_command, buf, 4096);
+	len = strlen(buf);
+	return len;
+}
+
+
+static DRIVER_ATTR(recording_status, 0444, vmlogrdr_recording_status_show,
+		   NULL);
+
+static struct attribute *vmlogrdr_attrs[] = {
+	&dev_attr_autopurge.attr,
+	&dev_attr_purge.attr,
+	&dev_attr_autorecording.attr,
+	&dev_attr_recording.attr,
+	NULL,
+};
+
+static struct attribute_group vmlogrdr_attr_group = {
+	.attrs = vmlogrdr_attrs,
+};
+
+static struct class_simple *vmlogrdr_class;
+static struct device_driver vmlogrdr_driver = {
+	.name = "vmlogrdr",
+	.bus  = &iucv_bus,
+};
+
+
+static int
+vmlogrdr_register_driver(void) {
+	int ret;
+
+	ret = driver_register(&vmlogrdr_driver);
+	if (ret) {
+		printk(KERN_ERR "vmlogrdr: failed to register driver.\n");
+		return ret;
+	}
+
+	ret = driver_create_file(&vmlogrdr_driver,
+				 &driver_attr_recording_status);
+	if (ret) {
+		printk(KERN_ERR "vmlogrdr: failed to add driver attribute.\n");
+		goto unregdriver;
+	}
+
+	vmlogrdr_class = class_simple_create(THIS_MODULE, "vmlogrdr");
+	if (IS_ERR(vmlogrdr_class)) {
+		printk(KERN_ERR "vmlogrdr: failed to create class.\n");
+		ret=PTR_ERR(vmlogrdr_class);
+		vmlogrdr_class=NULL;
+		goto unregattr;
+	}
+	return 0;
+
+unregattr:
+	driver_remove_file(&vmlogrdr_driver, &driver_attr_recording_status);
+unregdriver:
+	driver_unregister(&vmlogrdr_driver);
+	return ret;
+}
+
+
+static void
+vmlogrdr_unregister_driver(void) {
+	class_simple_destroy(vmlogrdr_class);
+	vmlogrdr_class = NULL;
+	driver_remove_file(&vmlogrdr_driver, &driver_attr_recording_status);
+	driver_unregister(&vmlogrdr_driver);
+	return;
+}
+
+
+static int
+vmlogrdr_register_device(struct vmlogrdr_priv_t *priv) {
+	struct device *dev;
+	int ret;
+
+	dev = kmalloc(sizeof(struct device), GFP_KERNEL);
+	if (dev) {
+		memset(dev, 0, sizeof(struct device));
+		snprintf(dev->bus_id, BUS_ID_SIZE, "%s",
+			 priv->internal_name);
+		dev->bus = &iucv_bus;
+		dev->parent = iucv_root;
+		dev->driver = &vmlogrdr_driver;
+		/*
+		 * The release function could be called after the
+		 * module has been unloaded. It's _only_ task is to
+		 * free the struct. Therefore, we specify kfree()
+		 * directly here. (Probably a little bit obfuscating
+		 * but legitime ...).
+		 */
+		dev->release = (void (*)(struct device *))kfree;
+	} else
+		return -ENOMEM;
+	ret = device_register(dev);
+	if (ret)
+		return ret;
+
+	ret = sysfs_create_group(&dev->kobj, &vmlogrdr_attr_group);
+	if (ret) {
+		device_unregister(dev);
+		return ret;
+	}
+	priv->class_device = class_simple_device_add(
+				vmlogrdr_class,
+				MKDEV(vmlogrdr_major, priv->minor_num),
+				dev,
+				"%s", dev->bus_id );
+	if (IS_ERR(priv->class_device)) {
+		ret = PTR_ERR(priv->class_device);
+		priv->class_device=NULL;
+		sysfs_remove_group(&dev->kobj, &vmlogrdr_attr_group);
+		device_unregister(dev);
+		return ret;
+	}
+	dev->driver_data = priv;
+	priv->device = dev;
+	return 0;
+}
+
+
+static int
+vmlogrdr_unregister_device(struct vmlogrdr_priv_t *priv ) {
+	class_simple_device_remove(MKDEV(vmlogrdr_major, priv->minor_num));
+	if (priv->device != NULL) {
+		sysfs_remove_group(&priv->device->kobj, &vmlogrdr_attr_group);
+		device_unregister(priv->device);
+		priv->device=NULL;
+	}
+	return 0;
+}
+
+
+static int
+vmlogrdr_register_cdev(dev_t dev) {
+	int rc = 0;
+	vmlogrdr_cdev = cdev_alloc();
+	if (!vmlogrdr_cdev) {
+		return -ENOMEM;
+	}
+	vmlogrdr_cdev->owner = THIS_MODULE;
+	vmlogrdr_cdev->ops = &vmlogrdr_fops;
+	vmlogrdr_cdev->dev = dev;
+	rc = cdev_add(vmlogrdr_cdev, vmlogrdr_cdev->dev, MAXMINOR);
+	if (!rc)
+		return 0;
+
+	// cleanup: cdev is not fully registered, no cdev_del here!
+	kobject_put(&vmlogrdr_cdev->kobj);
+	vmlogrdr_cdev=NULL;
+	return rc;
+}
+
+
+static void
+vmlogrdr_cleanup(void) {
+        int i;
+	if (vmlogrdr_cdev) {
+		cdev_del(vmlogrdr_cdev);
+		vmlogrdr_cdev=NULL;
+	}
+	for (i=0; i < MAXMINOR; ++i ) {
+		vmlogrdr_unregister_device(&sys_ser[i]);
+		free_page((unsigned long)sys_ser[i].buffer);
+	}
+	vmlogrdr_unregister_driver();
+	if (vmlogrdr_major) {
+		unregister_chrdev_region(MKDEV(vmlogrdr_major, 0), MAXMINOR);
+		vmlogrdr_major=0;
+	}
+}
+
+
+static int
+vmlogrdr_init(void)
+{
+	int rc;
+	int i;
+	dev_t dev;
+
+	if (! MACHINE_IS_VM) {
+		printk (KERN_ERR "vmlogrdr: not running under VM, "
+				"driver not loaded.\n");
+		return -ENODEV;
+	}
+
+        recording_class_AB = vmlogrdr_get_recording_class_AB();
+
+	rc = alloc_chrdev_region(&dev, 0, MAXMINOR, "vmlogrdr");
+	if (rc)
+		return rc;
+	vmlogrdr_major = MAJOR(dev);
+
+	rc=vmlogrdr_register_driver();
+	if (rc)
+		goto cleanup;
+
+	for (i=0; i < MAXMINOR; ++i ) {
+		sys_ser[i].buffer = (char *) get_zeroed_page(GFP_KERNEL);
+		if (!sys_ser[i].buffer) {
+			rc = ENOMEM;
+			break;
+		}
+		sys_ser[i].current_position = sys_ser[i].buffer;
+		rc=vmlogrdr_register_device(&sys_ser[i]);
+		if (rc)
+			break;
+	}
+	if (rc)
+		goto cleanup;
+
+	rc = vmlogrdr_register_cdev(dev);
+	if (rc)
+		goto cleanup;
+	printk (KERN_INFO "vmlogrdr: driver loaded\n");
+	return 0;
+
+cleanup:
+	vmlogrdr_cleanup();
+	printk (KERN_ERR "vmlogrdr: driver not loaded.\n");
+	return rc;
+}
+
+
+static void
+vmlogrdr_exit(void)
+{
+	vmlogrdr_cleanup();
+	printk (KERN_INFO "vmlogrdr: driver unloaded\n");
+	return;
+}
+
+
+module_init(vmlogrdr_init);
+module_exit(vmlogrdr_exit);
diff --git a/drivers/s390/char/vmwatchdog.c b/drivers/s390/char/vmwatchdog.c
new file mode 100644
index 0000000..22cf4fe
--- /dev/null
+++ b/drivers/s390/char/vmwatchdog.c
@@ -0,0 +1,292 @@
+/*
+ * Watchdog implementation based on z/VM Watchdog Timer API
+ *
+ * The user space watchdog daemon can use this driver as
+ * /dev/vmwatchdog to have z/VM execute the specified CP
+ * command when the timeout expires. The default command is
+ * "IPL", which which cause an immediate reboot.
+ */
+#include <linux/init.h>
+#include <linux/fs.h>
+#include <linux/kernel.h>
+#include <linux/miscdevice.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/watchdog.h>
+
+#include <asm/ebcdic.h>
+#include <asm/io.h>
+#include <asm/uaccess.h>
+
+#define MAX_CMDLEN 240
+#define MIN_INTERVAL 15
+static char vmwdt_cmd[MAX_CMDLEN] = "IPL";
+static int vmwdt_conceal;
+
+#ifdef CONFIG_WATCHDOG_NOWAYOUT
+static int vmwdt_nowayout = 1;
+#else
+static int vmwdt_nowayout = 0;
+#endif
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Arnd Bergmann <arndb@de.ibm.com>");
+MODULE_DESCRIPTION("z/VM Watchdog Timer");
+module_param_string(cmd, vmwdt_cmd, MAX_CMDLEN, 0644);
+MODULE_PARM_DESC(cmd, "CP command that is run when the watchdog triggers");
+module_param_named(conceal, vmwdt_conceal, bool, 0644);
+MODULE_PARM_DESC(conceal, "Enable the CONCEAL CP option while the watchdog "
+		" is active");
+module_param_named(nowayout, vmwdt_nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started"
+		" (default=CONFIG_WATCHDOG_NOWAYOUT)");
+MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
+
+static unsigned int vmwdt_interval = 60;
+static unsigned long vmwdt_is_open;
+static int vmwdt_expect_close;
+
+enum vmwdt_func {
+	/* function codes */
+	wdt_init   = 0,
+	wdt_change = 1,
+	wdt_cancel = 2,
+	/* flags */
+	wdt_conceal = 0x80000000,
+};
+
+static int __diag288(enum vmwdt_func func, unsigned int timeout,
+			    char *cmd, size_t len)
+{
+	register unsigned long __func asm("2");
+	register unsigned long __timeout asm("3");
+	register unsigned long __cmdp asm("4");
+	register unsigned long __cmdl asm("5");
+	int err;
+
+	__func = func;
+	__timeout = timeout;
+	__cmdp = virt_to_phys(cmd);
+	__cmdl = len;
+	err = 0;
+	asm volatile (
+#ifdef __s390x__
+		       "diag %2,%4,0x288\n"
+		"1:	\n"
+		".section .fixup,\"ax\"\n"
+		"2:	lghi %0,%1\n"
+		"	jg 1b\n"
+		".previous\n"
+		".section __ex_table,\"a\"\n"
+		"	.align 8\n"
+		"	.quad 1b,2b\n"
+		".previous\n"
+#else
+		       "diag %2,%4,0x288\n"
+		"1:	\n"
+		".section .fixup,\"ax\"\n"
+		"2:	lhi %0,%1\n"
+		"	bras 1,3f\n"
+		"	.long 1b\n"
+		"3:	l 1,0(1)\n"
+		"	br 1\n"
+		".previous\n"
+		".section __ex_table,\"a\"\n"
+		"	.align 4\n"
+		"	.long 1b,2b\n"
+		".previous\n"
+#endif
+		: "+&d"(err)
+		: "i"(-EINVAL), "d"(__func), "d"(__timeout),
+		  "d"(__cmdp), "d"(__cmdl)
+		: "1", "cc");
+	return err;
+}
+
+static int vmwdt_keepalive(void)
+{
+	/* we allocate new memory every time to avoid having
+	 * to track the state. static allocation is not an
+	 * option since that might not be contiguous in real
+	 * storage in case of a modular build */
+	static char *ebc_cmd;
+	size_t len;
+	int ret;
+	unsigned int func;
+
+	ebc_cmd = kmalloc(MAX_CMDLEN, GFP_KERNEL);
+	if (!ebc_cmd)
+		return -ENOMEM;
+
+	len = strlcpy(ebc_cmd, vmwdt_cmd, MAX_CMDLEN);
+	ASCEBC(ebc_cmd, MAX_CMDLEN);
+	EBC_TOUPPER(ebc_cmd, MAX_CMDLEN);
+
+	func = vmwdt_conceal ? (wdt_init | wdt_conceal) : wdt_init;
+	ret = __diag288(func, vmwdt_interval, ebc_cmd, len);
+	kfree(ebc_cmd);
+
+	if (ret) {
+		printk(KERN_WARNING "%s: problem setting interval %d, "
+			"cmd %s\n", __FUNCTION__, vmwdt_interval,
+			vmwdt_cmd);
+	}
+	return ret;
+}
+
+static int vmwdt_disable(void)
+{
+	int ret = __diag288(wdt_cancel, 0, "", 0);
+	if (ret) {
+		printk(KERN_WARNING "%s: problem disabling watchdog\n",
+			__FUNCTION__);
+	}
+	return ret;
+}
+
+static int __init vmwdt_probe(void)
+{
+	/* there is no real way to see if the watchdog is supported,
+	 * so we try initializing it with a NOP command ("BEGIN")
+	 * that won't cause any harm even if the following disable
+	 * fails for some reason */
+	static char __initdata ebc_begin[] = {
+		194, 197, 199, 201, 213
+	};
+	if (__diag288(wdt_init, 15, ebc_begin, sizeof(ebc_begin)) != 0) {
+		printk(KERN_INFO "z/VM watchdog not available\n");
+		return -EINVAL;
+	}
+	return vmwdt_disable();
+}
+
+static int vmwdt_open(struct inode *i, struct file *f)
+{
+	int ret;
+	if (test_and_set_bit(0, &vmwdt_is_open))
+		return -EBUSY;
+	ret = vmwdt_keepalive();
+	if (ret)
+		clear_bit(0, &vmwdt_is_open);
+	return ret ? ret : nonseekable_open(i, f);
+}
+
+static int vmwdt_close(struct inode *i, struct file *f)
+{
+	if (vmwdt_expect_close == 42)
+		vmwdt_disable();
+	vmwdt_expect_close = 0;
+	clear_bit(0, &vmwdt_is_open);
+	return 0;
+}
+
+static struct watchdog_info vmwdt_info = {
+	.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
+	.firmware_version = 0,
+	.identity = "z/VM Watchdog Timer",
+};
+
+static int vmwdt_ioctl(struct inode *i, struct file *f,
+			  unsigned int cmd, unsigned long arg)
+{
+	switch (cmd) {
+	case WDIOC_GETSUPPORT:
+		if (copy_to_user((void __user *)arg, &vmwdt_info,
+					sizeof(vmwdt_info)))
+			return -EFAULT;
+		return 0;
+	case WDIOC_GETSTATUS:
+	case WDIOC_GETBOOTSTATUS:
+		return put_user(0, (int *)arg);
+	case WDIOC_GETTEMP:
+		return -EINVAL;
+	case WDIOC_SETOPTIONS:
+		{
+			int options, ret;
+			if (get_user(options, (int __user *)arg))
+				return -EFAULT;
+			ret = -EINVAL;
+			if (options & WDIOS_DISABLECARD) {
+				ret = vmwdt_disable();
+				if (ret)
+					return ret;
+			}
+			if (options & WDIOS_ENABLECARD) {
+				ret = vmwdt_keepalive();
+			}
+			return ret;
+		}
+	case WDIOC_GETTIMEOUT:
+		return put_user(vmwdt_interval, (int __user *)arg);
+	case WDIOC_SETTIMEOUT:
+		{
+			int interval;
+			if (get_user(interval, (int __user *)arg))
+				return -EFAULT;
+			if (interval < MIN_INTERVAL)
+				return -EINVAL;
+			vmwdt_interval = interval;
+		}
+		return vmwdt_keepalive();
+	case WDIOC_KEEPALIVE:
+		return vmwdt_keepalive();
+	}
+
+	return -EINVAL;
+}
+
+static ssize_t vmwdt_write(struct file *f, const char __user *buf,
+				size_t count, loff_t *ppos)
+{
+	if(count) {
+		if (!vmwdt_nowayout) {
+			size_t i;
+
+			/* note: just in case someone wrote the magic character
+			 * five months ago... */
+			vmwdt_expect_close = 0;
+
+			for (i = 0; i != count; i++) {
+				char c;
+				if (get_user(c, buf+i))
+					return -EFAULT;
+				if (c == 'V')
+					vmwdt_expect_close = 42;
+			}
+		}
+		/* someone wrote to us, we should restart timer */
+		vmwdt_keepalive();
+	}
+	return count;
+}
+
+static struct file_operations vmwdt_fops = {
+	.open    = &vmwdt_open,
+	.release = &vmwdt_close,
+	.ioctl   = &vmwdt_ioctl,
+	.write   = &vmwdt_write,
+	.owner   = THIS_MODULE,
+};
+
+static struct miscdevice vmwdt_dev = {
+	.minor      = WATCHDOG_MINOR,
+	.name       = "watchdog",
+	.fops       = &vmwdt_fops,
+};
+
+static int __init vmwdt_init(void)
+{
+	int ret;
+
+	ret = vmwdt_probe();
+	if (ret)
+		return ret;
+	return misc_register(&vmwdt_dev);
+}
+module_init(vmwdt_init);
+
+static void __exit vmwdt_exit(void)
+{
+	WARN_ON(misc_deregister(&vmwdt_dev) != 0);
+}
+module_exit(vmwdt_exit);