Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/drivers/s390/net/iucv.h b/drivers/s390/net/iucv.h
new file mode 100644
index 0000000..1983302
--- /dev/null
+++ b/drivers/s390/net/iucv.h
@@ -0,0 +1,849 @@
+/*
+ * drivers/s390/net/iucv.h
+ * IUCV base support.
+ *
+ * S390 version
+ * Copyright (C) 2000 IBM Corporation
+ * Author(s):Alan Altmark (Alan_Altmark@us.ibm.com)
+ * Xenia Tkatschow (xenia@us.ibm.com)
+ *
+ *
+ * Functionality:
+ * To explore any of the IUCV functions, one must first register
+ * their program using iucv_register_program(). Once your program has
+ * successfully completed a register, it can exploit the other functions.
+ * For furthur reference on all IUCV functionality, refer to the
+ * CP Programming Services book, also available on the web
+ * thru www.ibm.com/s390/vm/pubs, manual # SC24-5760
+ *
+ * Definition of Return Codes
+ * -All positive return codes including zero are reflected back
+ * from CP except for iucv_register_program. The definition of each
+ * return code can be found in CP Programming Services book.
+ * Also available on the web thru www.ibm.com/s390/vm/pubs, manual # SC24-5760
+ * - Return Code of:
+ * (-EINVAL) Invalid value
+ * (-ENOMEM) storage allocation failed
+ * pgmask defined in iucv_register_program will be set depending on input
+ * paramters.
+ *
+ */
+
+#include <linux/types.h>
+#include <asm/debug.h>
+
+/**
+ * Debug Facility stuff
+ */
+#define IUCV_DBF_SETUP_NAME "iucv_setup"
+#define IUCV_DBF_SETUP_LEN 32
+#define IUCV_DBF_SETUP_INDEX 1
+#define IUCV_DBF_SETUP_NR_AREAS 1
+#define IUCV_DBF_SETUP_LEVEL 3
+
+#define IUCV_DBF_DATA_NAME "iucv_data"
+#define IUCV_DBF_DATA_LEN 128
+#define IUCV_DBF_DATA_INDEX 1
+#define IUCV_DBF_DATA_NR_AREAS 1
+#define IUCV_DBF_DATA_LEVEL 2
+
+#define IUCV_DBF_TRACE_NAME "iucv_trace"
+#define IUCV_DBF_TRACE_LEN 16
+#define IUCV_DBF_TRACE_INDEX 2
+#define IUCV_DBF_TRACE_NR_AREAS 1
+#define IUCV_DBF_TRACE_LEVEL 3
+
+#define IUCV_DBF_TEXT(name,level,text) \
+ do { \
+ debug_text_event(iucv_dbf_##name,level,text); \
+ } while (0)
+
+#define IUCV_DBF_HEX(name,level,addr,len) \
+ do { \
+ debug_event(iucv_dbf_##name,level,(void*)(addr),len); \
+ } while (0)
+
+DECLARE_PER_CPU(char[256], iucv_dbf_txt_buf);
+
+#define IUCV_DBF_TEXT_(name,level,text...) \
+ do { \
+ char* iucv_dbf_txt_buf = get_cpu_var(iucv_dbf_txt_buf); \
+ sprintf(iucv_dbf_txt_buf, text); \
+ debug_text_event(iucv_dbf_##name,level,iucv_dbf_txt_buf); \
+ put_cpu_var(iucv_dbf_txt_buf); \
+ } while (0)
+
+#define IUCV_DBF_SPRINTF(name,level,text...) \
+ do { \
+ debug_sprintf_event(iucv_dbf_trace, level, ##text ); \
+ debug_sprintf_event(iucv_dbf_trace, level, text ); \
+ } while (0)
+
+/**
+ * some more debug stuff
+ */
+#define IUCV_HEXDUMP16(importance,header,ptr) \
+PRINT_##importance(header "%02x %02x %02x %02x %02x %02x %02x %02x " \
+ "%02x %02x %02x %02x %02x %02x %02x %02x\n", \
+ *(((char*)ptr)),*(((char*)ptr)+1),*(((char*)ptr)+2), \
+ *(((char*)ptr)+3),*(((char*)ptr)+4),*(((char*)ptr)+5), \
+ *(((char*)ptr)+6),*(((char*)ptr)+7),*(((char*)ptr)+8), \
+ *(((char*)ptr)+9),*(((char*)ptr)+10),*(((char*)ptr)+11), \
+ *(((char*)ptr)+12),*(((char*)ptr)+13), \
+ *(((char*)ptr)+14),*(((char*)ptr)+15)); \
+PRINT_##importance(header "%02x %02x %02x %02x %02x %02x %02x %02x " \
+ "%02x %02x %02x %02x %02x %02x %02x %02x\n", \
+ *(((char*)ptr)+16),*(((char*)ptr)+17), \
+ *(((char*)ptr)+18),*(((char*)ptr)+19), \
+ *(((char*)ptr)+20),*(((char*)ptr)+21), \
+ *(((char*)ptr)+22),*(((char*)ptr)+23), \
+ *(((char*)ptr)+24),*(((char*)ptr)+25), \
+ *(((char*)ptr)+26),*(((char*)ptr)+27), \
+ *(((char*)ptr)+28),*(((char*)ptr)+29), \
+ *(((char*)ptr)+30),*(((char*)ptr)+31));
+
+static inline void
+iucv_hex_dump(unsigned char *buf, size_t len)
+{
+ size_t i;
+
+ for (i = 0; i < len; i++) {
+ if (i && !(i % 16))
+ printk("\n");
+ printk("%02x ", *(buf + i));
+ }
+ printk("\n");
+}
+/**
+ * end of debug stuff
+ */
+
+#define uchar unsigned char
+#define ushort unsigned short
+#define ulong unsigned long
+#define iucv_handle_t void *
+
+/* flags1:
+ * All flags are defined in the field IPFLAGS1 of each function
+ * and can be found in CP Programming Services.
+ * IPLOCAL - Indicates the connect can only be satisfied on the
+ * local system
+ * IPPRTY - Indicates a priority message
+ * IPQUSCE - Indicates you do not want to receive messages on a
+ * path until an iucv_resume is issued
+ * IPRMDATA - Indicates that the message is in the parameter list
+ */
+#define IPLOCAL 0x01
+#define IPPRTY 0x20
+#define IPQUSCE 0x40
+#define IPRMDATA 0x80
+
+/* flags1_out:
+ * All flags are defined in the output field of IPFLAGS1 for each function
+ * and can be found in CP Programming Services.
+ * IPNORPY - Specifies this is a one-way message and no reply is expected.
+ * IPPRTY - Indicates a priority message is permitted. Defined in flags1.
+ */
+#define IPNORPY 0x10
+
+#define Nonpriority_MessagePendingInterruptsFlag 0x80
+#define Priority_MessagePendingInterruptsFlag 0x40
+#define Nonpriority_MessageCompletionInterruptsFlag 0x20
+#define Priority_MessageCompletionInterruptsFlag 0x10
+#define IUCVControlInterruptsFlag 0x08
+#define AllInterrupts 0xf8
+/*
+ * Mapping of external interrupt buffers should be used with the corresponding
+ * interrupt types.
+ * Names: iucv_ConnectionPending -> connection pending
+ * iucv_ConnectionComplete -> connection complete
+ * iucv_ConnectionSevered -> connection severed
+ * iucv_ConnectionQuiesced -> connection quiesced
+ * iucv_ConnectionResumed -> connection resumed
+ * iucv_MessagePending -> message pending
+ * iucv_MessageComplete -> message complete
+ */
+typedef struct {
+ u16 ippathid;
+ uchar ipflags1;
+ uchar iptype;
+ u16 ipmsglim;
+ u16 res1;
+ uchar ipvmid[8];
+ uchar ipuser[16];
+ u32 res3;
+ uchar ippollfg;
+ uchar res4[3];
+} iucv_ConnectionPending;
+
+typedef struct {
+ u16 ippathid;
+ uchar ipflags1;
+ uchar iptype;
+ u16 ipmsglim;
+ u16 res1;
+ uchar res2[8];
+ uchar ipuser[16];
+ u32 res3;
+ uchar ippollfg;
+ uchar res4[3];
+} iucv_ConnectionComplete;
+
+typedef struct {
+ u16 ippathid;
+ uchar res1;
+ uchar iptype;
+ u32 res2;
+ uchar res3[8];
+ uchar ipuser[16];
+ u32 res4;
+ uchar ippollfg;
+ uchar res5[3];
+} iucv_ConnectionSevered;
+
+typedef struct {
+ u16 ippathid;
+ uchar res1;
+ uchar iptype;
+ u32 res2;
+ uchar res3[8];
+ uchar ipuser[16];
+ u32 res4;
+ uchar ippollfg;
+ uchar res5[3];
+} iucv_ConnectionQuiesced;
+
+typedef struct {
+ u16 ippathid;
+ uchar res1;
+ uchar iptype;
+ u32 res2;
+ uchar res3[8];
+ uchar ipuser[16];
+ u32 res4;
+ uchar ippollfg;
+ uchar res5[3];
+} iucv_ConnectionResumed;
+
+typedef struct {
+ u16 ippathid;
+ uchar ipflags1;
+ uchar iptype;
+ u32 ipmsgid;
+ u32 iptrgcls;
+ union u2 {
+ u32 iprmmsg1_u32;
+ uchar iprmmsg1[4];
+ } ln1msg1;
+ union u1 {
+ u32 ipbfln1f;
+ uchar iprmmsg2[4];
+ } ln1msg2;
+ u32 res1[3];
+ u32 ipbfln2f;
+ uchar ippollfg;
+ uchar res2[3];
+} iucv_MessagePending;
+
+typedef struct {
+ u16 ippathid;
+ uchar ipflags1;
+ uchar iptype;
+ u32 ipmsgid;
+ u32 ipaudit;
+ uchar iprmmsg[8];
+ u32 ipsrccls;
+ u32 ipmsgtag;
+ u32 res;
+ u32 ipbfln2f;
+ uchar ippollfg;
+ uchar res2[3];
+} iucv_MessageComplete;
+
+/*
+ * iucv_interrupt_ops_t: Is a vector of functions that handle
+ * IUCV interrupts.
+ * Parameter list:
+ * eib - is a pointer to a 40-byte area described
+ * with one of the structures above.
+ * pgm_data - this data is strictly for the
+ * interrupt handler that is passed by
+ * the application. This may be an address
+ * or token.
+*/
+typedef struct {
+ void (*ConnectionPending) (iucv_ConnectionPending * eib,
+ void *pgm_data);
+ void (*ConnectionComplete) (iucv_ConnectionComplete * eib,
+ void *pgm_data);
+ void (*ConnectionSevered) (iucv_ConnectionSevered * eib,
+ void *pgm_data);
+ void (*ConnectionQuiesced) (iucv_ConnectionQuiesced * eib,
+ void *pgm_data);
+ void (*ConnectionResumed) (iucv_ConnectionResumed * eib,
+ void *pgm_data);
+ void (*MessagePending) (iucv_MessagePending * eib, void *pgm_data);
+ void (*MessageComplete) (iucv_MessageComplete * eib, void *pgm_data);
+} iucv_interrupt_ops_t;
+
+/*
+ *iucv_array_t : Defines buffer array.
+ * Inside the array may be 31- bit addresses and 31-bit lengths.
+*/
+typedef struct {
+ u32 address;
+ u32 length;
+} iucv_array_t __attribute__ ((aligned (8)));
+
+extern struct bus_type iucv_bus;
+extern struct device *iucv_root;
+
+/* -prototypes- */
+/*
+ * Name: iucv_register_program
+ * Purpose: Registers an application with IUCV
+ * Input: prmname - user identification
+ * userid - machine identification
+ * pgmmask - indicates which bits in the prmname and userid combined will be
+ * used to determine who is given control
+ * ops - address of vector of interrupt handlers
+ * pgm_data- application data passed to interrupt handlers
+ * Output: NA
+ * Return: address of handler
+ * (0) - Error occurred, registration not completed.
+ * NOTE: Exact cause of failure will be recorded in syslog.
+*/
+iucv_handle_t iucv_register_program (uchar pgmname[16],
+ uchar userid[8],
+ uchar pgmmask[24],
+ iucv_interrupt_ops_t * ops,
+ void *pgm_data);
+
+/*
+ * Name: iucv_unregister_program
+ * Purpose: Unregister application with IUCV
+ * Input: address of handler
+ * Output: NA
+ * Return: (0) - Normal return
+ * (-EINVAL) - Internal error, wild pointer
+*/
+int iucv_unregister_program (iucv_handle_t handle);
+
+/*
+ * Name: iucv_accept
+ * Purpose: This function is issued after the user receives a Connection Pending external
+ * interrupt and now wishes to complete the IUCV communication path.
+ * Input: pathid - u16 , Path identification number
+ * msglim_reqstd - u16, The number of outstanding messages requested.
+ * user_data - uchar[16], Data specified by the iucv_connect function.
+ * flags1 - int, Contains options for this path.
+ * -IPPRTY - 0x20- Specifies if you want to send priority message.
+ * -IPRMDATA - 0x80, Specifies whether your program can handle a message
+ * in the parameter list.
+ * -IPQUSCE - 0x40, Specifies whether you want to quiesce the path being
+ * established.
+ * handle - iucv_handle_t, Address of handler.
+ * pgm_data - void *, Application data passed to interrupt handlers.
+ * flags1_out - int * Contains information about the path
+ * - IPPRTY - 0x20, Indicates you may send priority messages.
+ * msglim - *u16, Number of outstanding messages.
+ * Output: return code from CP IUCV call.
+*/
+
+int iucv_accept (u16 pathid,
+ u16 msglim_reqstd,
+ uchar user_data[16],
+ int flags1,
+ iucv_handle_t handle,
+ void *pgm_data, int *flags1_out, u16 * msglim);
+
+/*
+ * Name: iucv_connect
+ * Purpose: This function establishes an IUCV path. Although the connect may complete
+ * successfully, you are not able to use the path until you receive an IUCV
+ * Connection Complete external interrupt.
+ * Input: pathid - u16 *, Path identification number
+ * msglim_reqstd - u16, Number of outstanding messages requested
+ * user_data - uchar[16], 16-byte user data
+ * userid - uchar[8], User identification
+ * system_name - uchar[8], 8-byte identifying the system name
+ * flags1 - int, Contains options for this path.
+ * -IPPRTY - 0x20, Specifies if you want to send priority message.
+ * -IPRMDATA - 0x80, Specifies whether your program can handle a message
+ * in the parameter list.
+ * -IPQUSCE - 0x40, Specifies whether you want to quiesce the path being
+ * established.
+ * -IPLOCAL - 0X01, Allows an application to force the partner to be on
+ * the local system. If local is specified then target class cannot be
+ * specified.
+ * flags1_out - int * Contains information about the path
+ * - IPPRTY - 0x20, Indicates you may send priority messages.
+ * msglim - * u16, Number of outstanding messages
+ * handle - iucv_handle_t, Address of handler
+ * pgm_data - void *, Application data passed to interrupt handlers
+ * Output: return code from CP IUCV call
+ * rc - return code from iucv_declare_buffer
+ * -EINVAL - Invalid handle passed by application
+ * -EINVAL - Pathid address is NULL
+ * add_pathid_result - Return code from internal function add_pathid
+*/
+int
+ iucv_connect (u16 * pathid,
+ u16 msglim_reqstd,
+ uchar user_data[16],
+ uchar userid[8],
+ uchar system_name[8],
+ int flags1,
+ int *flags1_out,
+ u16 * msglim, iucv_handle_t handle, void *pgm_data);
+
+/*
+ * Name: iucv_purge
+ * Purpose: This function cancels a message that you have sent.
+ * Input: pathid - Path identification number.
+ * msgid - Specifies the message ID of the message to be purged.
+ * srccls - Specifies the source message class.
+ * Output: audit - Contains information about asynchronous error
+ * that may have affected the normal completion
+ * of this message.
+ * Return: Return code from CP IUCV call.
+*/
+int iucv_purge (u16 pathid, u32 msgid, u32 srccls, __u32 *audit);
+/*
+ * Name: iucv_query_maxconn
+ * Purpose: This function determines the maximum number of communication paths you
+ * may establish.
+ * Return: maxconn - ulong, Maximum number of connection the virtual machine may
+ * establish.
+*/
+ulong iucv_query_maxconn (void);
+
+/*
+ * Name: iucv_query_bufsize
+ * Purpose: This function determines how large an external interrupt
+ * buffer IUCV requires to store information.
+ * Return: bufsize - ulong, Size of external interrupt buffer.
+ */
+ulong iucv_query_bufsize (void);
+
+/*
+ * Name: iucv_quiesce
+ * Purpose: This function temporarily suspends incoming messages on an
+ * IUCV path. You can later reactivate the path by invoking
+ * the iucv_resume function.
+ * Input: pathid - Path identification number
+ * user_data - 16-bytes of user data
+ * Output: NA
+ * Return: Return code from CP IUCV call.
+*/
+int iucv_quiesce (u16 pathid, uchar user_data[16]);
+
+/*
+ * Name: iucv_receive
+ * Purpose: This function receives messages that are being sent to you
+ * over established paths. Data will be returned in buffer for length of
+ * buflen.
+ * Input:
+ * pathid - Path identification number.
+ * buffer - Address of buffer to receive.
+ * buflen - Length of buffer to receive.
+ * msgid - Specifies the message ID.
+ * trgcls - Specifies target class.
+ * Output:
+ * flags1_out: int *, Contains information about this path.
+ * IPNORPY - 0x10 Specifies this is a one-way message and no reply is
+ * expected.
+ * IPPRTY - 0x20 Specifies if you want to send priority message.
+ * IPRMDATA - 0x80 specifies the data is contained in the parameter list
+ * residual_buffer - address of buffer updated by the number
+ * of bytes you have received.
+ * residual_length -
+ * Contains one of the following values, if the receive buffer is:
+ * The same length as the message, this field is zero.
+ * Longer than the message, this field contains the number of
+ * bytes remaining in the buffer.
+ * Shorter than the message, this field contains the residual
+ * count (that is, the number of bytes remaining in the
+ * message that does not fit into the buffer. In this
+ * case b2f0_result = 5.
+ * Return: Return code from CP IUCV call.
+ * (-EINVAL) - buffer address is pointing to NULL
+*/
+int iucv_receive (u16 pathid,
+ u32 msgid,
+ u32 trgcls,
+ void *buffer,
+ ulong buflen,
+ int *flags1_out,
+ ulong * residual_buffer, ulong * residual_length);
+
+ /*
+ * Name: iucv_receive_array
+ * Purpose: This function receives messages that are being sent to you
+ * over established paths. Data will be returned in first buffer for
+ * length of first buffer.
+ * Input: pathid - Path identification number.
+ * msgid - specifies the message ID.
+ * trgcls - Specifies target class.
+ * buffer - Address of array of buffers.
+ * buflen - Total length of buffers.
+ * Output:
+ * flags1_out: int *, Contains information about this path.
+ * IPNORPY - 0x10 Specifies this is a one-way message and no reply is
+ * expected.
+ * IPPRTY - 0x20 Specifies if you want to send priority message.
+ * IPRMDATA - 0x80 specifies the data is contained in the parameter list
+ * residual_buffer - address points to the current list entry IUCV
+ * is working on.
+ * residual_length -
+ * Contains one of the following values, if the receive buffer is:
+ * The same length as the message, this field is zero.
+ * Longer than the message, this field contains the number of
+ * bytes remaining in the buffer.
+ * Shorter than the message, this field contains the residual
+ * count (that is, the number of bytes remaining in the
+ * message that does not fit into the buffer. In this
+ * case b2f0_result = 5.
+ * Return: Return code from CP IUCV call.
+ * (-EINVAL) - Buffer address is NULL.
+ */
+int iucv_receive_array (u16 pathid,
+ u32 msgid,
+ u32 trgcls,
+ iucv_array_t * buffer,
+ ulong buflen,
+ int *flags1_out,
+ ulong * residual_buffer, ulong * residual_length);
+
+/*
+ * Name: iucv_reject
+ * Purpose: The reject function refuses a specified message. Between the
+ * time you are notified of a message and the time that you
+ * complete the message, the message may be rejected.
+ * Input: pathid - Path identification number.
+ * msgid - Specifies the message ID.
+ * trgcls - Specifies target class.
+ * Output: NA
+ * Return: Return code from CP IUCV call.
+*/
+int iucv_reject (u16 pathid, u32 msgid, u32 trgcls);
+
+/*
+ * Name: iucv_reply
+ * Purpose: This function responds to the two-way messages that you
+ * receive. You must identify completely the message to
+ * which you wish to reply. ie, pathid, msgid, and trgcls.
+ * Input: pathid - Path identification number.
+ * msgid - Specifies the message ID.
+ * trgcls - Specifies target class.
+ * flags1 - Option for path.
+ * IPPRTY- 0x20, Specifies if you want to send priority message.
+ * buffer - Address of reply buffer.
+ * buflen - Length of reply buffer.
+ * Output: residual_buffer - Address of buffer updated by the number
+ * of bytes you have moved.
+ * residual_length - Contains one of the following values:
+ * If the answer buffer is the same length as the reply, this field
+ * contains zero.
+ * If the answer buffer is longer than the reply, this field contains
+ * the number of bytes remaining in the buffer.
+ * If the answer buffer is shorter than the reply, this field contains
+ * a residual count (that is, the number of bytes remianing in the
+ * reply that does not fit into the buffer. In this
+ * case b2f0_result = 5.
+ * Return: Return code from CP IUCV call.
+ * (-EINVAL) - Buffer address is NULL.
+*/
+int iucv_reply (u16 pathid,
+ u32 msgid,
+ u32 trgcls,
+ int flags1,
+ void *buffer, ulong buflen, ulong * residual_buffer,
+ ulong * residual_length);
+
+/*
+ * Name: iucv_reply_array
+ * Purpose: This function responds to the two-way messages that you
+ * receive. You must identify completely the message to
+ * which you wish to reply. ie, pathid, msgid, and trgcls.
+ * The array identifies a list of addresses and lengths of
+ * discontiguous buffers that contains the reply data.
+ * Input: pathid - Path identification number
+ * msgid - Specifies the message ID.
+ * trgcls - Specifies target class.
+ * flags1 - Option for path.
+ * IPPRTY- 0x20, Specifies if you want to send priority message.
+ * buffer - Address of array of reply buffers.
+ * buflen - Total length of reply buffers.
+ * Output: residual_buffer - Address of buffer which IUCV is currently working on.
+ * residual_length - Contains one of the following values:
+ * If the answer buffer is the same length as the reply, this field
+ * contains zero.
+ * If the answer buffer is longer than the reply, this field contains
+ * the number of bytes remaining in the buffer.
+ * If the answer buffer is shorter than the reply, this field contains
+ * a residual count (that is, the number of bytes remianing in the
+ * reply that does not fit into the buffer. In this
+ * case b2f0_result = 5.
+ * Return: Return code from CP IUCV call.
+ * (-EINVAL) - Buffer address is NULL.
+*/
+int iucv_reply_array (u16 pathid,
+ u32 msgid,
+ u32 trgcls,
+ int flags1,
+ iucv_array_t * buffer,
+ ulong buflen, ulong * residual_address,
+ ulong * residual_length);
+
+/*
+ * Name: iucv_reply_prmmsg
+ * Purpose: This function responds to the two-way messages that you
+ * receive. You must identify completely the message to
+ * which you wish to reply. ie, pathid, msgid, and trgcls.
+ * Prmmsg signifies the data is moved into the
+ * parameter list.
+ * Input: pathid - Path identification number.
+ * msgid - Specifies the message ID.
+ * trgcls - Specifies target class.
+ * flags1 - Option for path.
+ * IPPRTY- 0x20 Specifies if you want to send priority message.
+ * prmmsg - 8-bytes of data to be placed into the parameter.
+ * list.
+ * Output: NA
+ * Return: Return code from CP IUCV call.
+*/
+int iucv_reply_prmmsg (u16 pathid,
+ u32 msgid, u32 trgcls, int flags1, uchar prmmsg[8]);
+
+/*
+ * Name: iucv_resume
+ * Purpose: This function restores communications over a quiesced path
+ * Input: pathid - Path identification number.
+ * user_data - 16-bytes of user data.
+ * Output: NA
+ * Return: Return code from CP IUCV call.
+*/
+int iucv_resume (u16 pathid, uchar user_data[16]);
+
+/*
+ * Name: iucv_send
+ * Purpose: This function transmits data to another application.
+ * Data to be transmitted is in a buffer and this is a
+ * one-way message and the receiver will not reply to the
+ * message.
+ * Input: pathid - Path identification number.
+ * trgcls - Specifies target class.
+ * srccls - Specifies the source message class.
+ * msgtag - Specifies a tag to be associated with the message.
+ * flags1 - Option for path.
+ * IPPRTY- 0x20 Specifies if you want to send priority message.
+ * buffer - Address of send buffer.
+ * buflen - Length of send buffer.
+ * Output: msgid - Specifies the message ID.
+ * Return: Return code from CP IUCV call.
+ * (-EINVAL) - Buffer address is NULL.
+*/
+int iucv_send (u16 pathid,
+ u32 * msgid,
+ u32 trgcls,
+ u32 srccls, u32 msgtag, int flags1, void *buffer, ulong buflen);
+
+/*
+ * Name: iucv_send_array
+ * Purpose: This function transmits data to another application.
+ * The contents of buffer is the address of the array of
+ * addresses and lengths of discontiguous buffers that hold
+ * the message text. This is a one-way message and the
+ * receiver will not reply to the message.
+ * Input: pathid - Path identification number.
+ * trgcls - Specifies target class.
+ * srccls - Specifies the source message class.
+ * msgtag - Specifies a tag to be associated witht the message.
+ * flags1 - Option for path.
+ * IPPRTY- specifies if you want to send priority message.
+ * buffer - Address of array of send buffers.
+ * buflen - Total length of send buffers.
+ * Output: msgid - Specifies the message ID.
+ * Return: Return code from CP IUCV call.
+ * (-EINVAL) - Buffer address is NULL.
+*/
+int iucv_send_array (u16 pathid,
+ u32 * msgid,
+ u32 trgcls,
+ u32 srccls,
+ u32 msgtag,
+ int flags1, iucv_array_t * buffer, ulong buflen);
+
+/*
+ * Name: iucv_send_prmmsg
+ * Purpose: This function transmits data to another application.
+ * Prmmsg specifies that the 8-bytes of data are to be moved
+ * into the parameter list. This is a one-way message and the
+ * receiver will not reply to the message.
+ * Input: pathid - Path identification number.
+ * trgcls - Specifies target class.
+ * srccls - Specifies the source message class.
+ * msgtag - Specifies a tag to be associated with the message.
+ * flags1 - Option for path.
+ * IPPRTY- 0x20 specifies if you want to send priority message.
+ * prmmsg - 8-bytes of data to be placed into parameter list.
+ * Output: msgid - Specifies the message ID.
+ * Return: Return code from CP IUCV call.
+*/
+int iucv_send_prmmsg (u16 pathid,
+ u32 * msgid,
+ u32 trgcls,
+ u32 srccls, u32 msgtag, int flags1, uchar prmmsg[8]);
+
+/*
+ * Name: iucv_send2way
+ * Purpose: This function transmits data to another application.
+ * Data to be transmitted is in a buffer. The receiver
+ * of the send is expected to reply to the message and
+ * a buffer is provided into which IUCV moves the reply
+ * to this message.
+ * Input: pathid - Path identification number.
+ * trgcls - Specifies target class.
+ * srccls - Specifies the source message class.
+ * msgtag - Specifies a tag associated with the message.
+ * flags1 - Option for path.
+ * IPPRTY- 0x20 Specifies if you want to send priority message.
+ * buffer - Address of send buffer.
+ * buflen - Length of send buffer.
+ * ansbuf - Address of buffer into which IUCV moves the reply of
+ * this message.
+ * anslen - Address of length of buffer.
+ * Output: msgid - Specifies the message ID.
+ * Return: Return code from CP IUCV call.
+ * (-EINVAL) - Buffer or ansbuf address is NULL.
+*/
+int iucv_send2way (u16 pathid,
+ u32 * msgid,
+ u32 trgcls,
+ u32 srccls,
+ u32 msgtag,
+ int flags1,
+ void *buffer, ulong buflen, void *ansbuf, ulong anslen);
+
+/*
+ * Name: iucv_send2way_array
+ * Purpose: This function transmits data to another application.
+ * The contents of buffer is the address of the array of
+ * addresses and lengths of discontiguous buffers that hold
+ * the message text. The receiver of the send is expected to
+ * reply to the message and a buffer is provided into which
+ * IUCV moves the reply to this message.
+ * Input: pathid - Path identification number.
+ * trgcls - Specifies target class.
+ * srccls - Specifies the source message class.
+ * msgtag - Specifies a tag to be associated with the message.
+ * flags1 - Option for path.
+ * IPPRTY- 0x20 Specifies if you want to send priority message.
+ * buffer - Sddress of array of send buffers.
+ * buflen - Total length of send buffers.
+ * ansbuf - Address of array of buffer into which IUCV moves the reply
+ * of this message.
+ * anslen - Address of length reply buffers.
+ * Output: msgid - Specifies the message ID.
+ * Return: Return code from CP IUCV call.
+ * (-EINVAL) - Buffer address is NULL.
+*/
+int iucv_send2way_array (u16 pathid,
+ u32 * msgid,
+ u32 trgcls,
+ u32 srccls,
+ u32 msgtag,
+ int flags1,
+ iucv_array_t * buffer,
+ ulong buflen, iucv_array_t * ansbuf, ulong anslen);
+
+/*
+ * Name: iucv_send2way_prmmsg
+ * Purpose: This function transmits data to another application.
+ * Prmmsg specifies that the 8-bytes of data are to be moved
+ * into the parameter list. This is a two-way message and the
+ * receiver of the message is expected to reply. A buffer
+ * is provided into which IUCV moves the reply to this
+ * message.
+ * Input: pathid - Rath identification number.
+ * trgcls - Specifies target class.
+ * srccls - Specifies the source message class.
+ * msgtag - Specifies a tag to be associated with the message.
+ * flags1 - Option for path.
+ * IPPRTY- 0x20 Specifies if you want to send priority message.
+ * prmmsg - 8-bytes of data to be placed in parameter list.
+ * ansbuf - Address of buffer into which IUCV moves the reply of
+ * this message.
+ * anslen - Address of length of buffer.
+ * Output: msgid - Specifies the message ID.
+ * Return: Return code from CP IUCV call.
+ * (-EINVAL) - Buffer address is NULL.
+*/
+int iucv_send2way_prmmsg (u16 pathid,
+ u32 * msgid,
+ u32 trgcls,
+ u32 srccls,
+ u32 msgtag,
+ ulong flags1,
+ uchar prmmsg[8], void *ansbuf, ulong anslen);
+
+/*
+ * Name: iucv_send2way_prmmsg_array
+ * Purpose: This function transmits data to another application.
+ * Prmmsg specifies that the 8-bytes of data are to be moved
+ * into the parameter list. This is a two-way message and the
+ * receiver of the message is expected to reply. A buffer
+ * is provided into which IUCV moves the reply to this
+ * message. The contents of ansbuf is the address of the
+ * array of addresses and lengths of discontiguous buffers
+ * that contain the reply.
+ * Input: pathid - Path identification number.
+ * trgcls - Specifies target class.
+ * srccls - Specifies the source message class.
+ * msgtag - Specifies a tag to be associated with the message.
+ * flags1 - Option for path.
+ * IPPRTY- 0x20 specifies if you want to send priority message.
+ * prmmsg - 8-bytes of data to be placed into the parameter list.
+ * ansbuf - Address of array of buffer into which IUCV moves the reply
+ * of this message.
+ * anslen - Address of length of reply buffers.
+ * Output: msgid - Specifies the message ID.
+ * Return: Return code from CP IUCV call.
+ * (-EINVAL) - Ansbuf address is NULL.
+*/
+int iucv_send2way_prmmsg_array (u16 pathid,
+ u32 * msgid,
+ u32 trgcls,
+ u32 srccls,
+ u32 msgtag,
+ int flags1,
+ uchar prmmsg[8],
+ iucv_array_t * ansbuf, ulong anslen);
+
+/*
+ * Name: iucv_setmask
+ * Purpose: This function enables or disables the following IUCV
+ * external interruptions: Nonpriority and priority message
+ * interrupts, nonpriority and priority reply interrupts.
+ * Input: SetMaskFlag - options for interrupts
+ * 0x80 - Nonpriority_MessagePendingInterruptsFlag
+ * 0x40 - Priority_MessagePendingInterruptsFlag
+ * 0x20 - Nonpriority_MessageCompletionInterruptsFlag
+ * 0x10 - Priority_MessageCompletionInterruptsFlag
+ * 0x08 - IUCVControlInterruptsFlag
+ * Output: NA
+ * Return: Return code from CP IUCV call.
+*/
+int iucv_setmask (int SetMaskFlag);
+
+/*
+ * Name: iucv_sever
+ * Purpose: This function terminates an IUCV path.
+ * Input: pathid - Path identification number.
+ * user_data - 16-bytes of user data.
+ * Output: NA
+ * Return: Return code from CP IUCV call.
+ * (-EINVAL) - Interal error, wild pointer.
+*/
+int iucv_sever (u16 pathid, uchar user_data[16]);