Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/drivers/scsi/qla2xxx/qla_inline.h b/drivers/scsi/qla2xxx/qla_inline.h
new file mode 100644
index 0000000..07c1133
--- /dev/null
+++ b/drivers/scsi/qla2xxx/qla_inline.h
@@ -0,0 +1,292 @@
+/*
+ * QLOGIC LINUX SOFTWARE
+ *
+ * QLogic ISP2x00 device driver for Linux 2.6.x
+ * Copyright (C) 2003-2004 QLogic Corporation
+ * (www.qlogic.com)
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ */
+
+
+static __inline__ uint16_t qla2x00_debounce_register(volatile uint16_t __iomem *);
+/*
+ * qla2x00_debounce_register
+ * Debounce register.
+ *
+ * Input:
+ * port = register address.
+ *
+ * Returns:
+ * register value.
+ */
+static __inline__ uint16_t
+qla2x00_debounce_register(volatile uint16_t __iomem *addr)
+{
+ volatile uint16_t first;
+ volatile uint16_t second;
+
+ do {
+ first = RD_REG_WORD(addr);
+ barrier();
+ cpu_relax();
+ second = RD_REG_WORD(addr);
+ } while (first != second);
+
+ return (first);
+}
+
+static __inline__ int qla2x00_normalize_dma_addr(
+ dma_addr_t *e_addr, uint32_t *e_len,
+ dma_addr_t *ne_addr, uint32_t *ne_len);
+
+/**
+ * qla2x00_normalize_dma_addr() - Normalize an DMA address.
+ * @e_addr: Raw DMA address
+ * @e_len: Raw DMA length
+ * @ne_addr: Normalized second DMA address
+ * @ne_len: Normalized second DMA length
+ *
+ * If the address does not span a 4GB page boundary, the contents of @ne_addr
+ * and @ne_len are undefined. @e_len is updated to reflect a normalization.
+ *
+ * Example:
+ *
+ * ffffabc0ffffeeee (e_addr) start of DMA address
+ * 0000000020000000 (e_len) length of DMA transfer
+ * ffffabc11fffeeed end of DMA transfer
+ *
+ * Is the 4GB boundary crossed?
+ *
+ * ffffabc0ffffeeee (e_addr)
+ * ffffabc11fffeeed (e_addr + e_len - 1)
+ * 00000001e0000003 ((e_addr ^ (e_addr + e_len - 1))
+ * 0000000100000000 ((e_addr ^ (e_addr + e_len - 1)) & ~(0xffffffff)
+ *
+ * Compute start of second DMA segment:
+ *
+ * ffffabc0ffffeeee (e_addr)
+ * ffffabc1ffffeeee (0x100000000 + e_addr)
+ * ffffabc100000000 (0x100000000 + e_addr) & ~(0xffffffff)
+ * ffffabc100000000 (ne_addr)
+ *
+ * Compute length of second DMA segment:
+ *
+ * 00000000ffffeeee (e_addr & 0xffffffff)
+ * 0000000000001112 (0x100000000 - (e_addr & 0xffffffff))
+ * 000000001fffeeee (e_len - (0x100000000 - (e_addr & 0xffffffff))
+ * 000000001fffeeee (ne_len)
+ *
+ * Adjust length of first DMA segment
+ *
+ * 0000000020000000 (e_len)
+ * 0000000000001112 (e_len - ne_len)
+ * 0000000000001112 (e_len)
+ *
+ * Returns non-zero if the specified address was normalized, else zero.
+ */
+static __inline__ int
+qla2x00_normalize_dma_addr(
+ dma_addr_t *e_addr, uint32_t *e_len,
+ dma_addr_t *ne_addr, uint32_t *ne_len)
+{
+ int normalized;
+
+ normalized = 0;
+ if ((*e_addr ^ (*e_addr + *e_len - 1)) & ~(0xFFFFFFFFULL)) {
+ /* Compute normalized crossed address and len */
+ *ne_addr = (0x100000000ULL + *e_addr) & ~(0xFFFFFFFFULL);
+ *ne_len = *e_len - (0x100000000ULL - (*e_addr & 0xFFFFFFFFULL));
+ *e_len -= *ne_len;
+
+ normalized++;
+ }
+ return (normalized);
+}
+
+static __inline__ void qla2x00_poll(scsi_qla_host_t *);
+static inline void
+qla2x00_poll(scsi_qla_host_t *ha)
+{
+ if (IS_QLA2100(ha) || IS_QLA2200(ha))
+ qla2100_intr_handler(0, ha, NULL);
+ else
+ qla2300_intr_handler(0, ha, NULL);
+}
+
+
+static __inline__ void qla2x00_enable_intrs(scsi_qla_host_t *);
+static __inline__ void qla2x00_disable_intrs(scsi_qla_host_t *);
+
+static inline void
+qla2x00_enable_intrs(scsi_qla_host_t *ha)
+{
+ unsigned long flags = 0;
+ device_reg_t __iomem *reg = ha->iobase;
+
+ spin_lock_irqsave(&ha->hardware_lock, flags);
+ ha->interrupts_on = 1;
+ /* enable risc and host interrupts */
+ WRT_REG_WORD(®->ictrl, ICR_EN_INT | ICR_EN_RISC);
+ RD_REG_WORD(®->ictrl);
+ spin_unlock_irqrestore(&ha->hardware_lock, flags);
+
+}
+
+static inline void
+qla2x00_disable_intrs(scsi_qla_host_t *ha)
+{
+ unsigned long flags = 0;
+ device_reg_t __iomem *reg = ha->iobase;
+
+ spin_lock_irqsave(&ha->hardware_lock, flags);
+ ha->interrupts_on = 0;
+ /* disable risc and host interrupts */
+ WRT_REG_WORD(®->ictrl, 0);
+ RD_REG_WORD(®->ictrl);
+ spin_unlock_irqrestore(&ha->hardware_lock, flags);
+}
+
+
+static __inline__ int qla2x00_is_wwn_zero(uint8_t *);
+
+/*
+ * qla2x00_is_wwn_zero - Check for zero node name
+ *
+ * Input:
+ * wwn = Pointer to WW name to check
+ *
+ * Returns:
+ * 1 if name is 0x00 else 0
+ *
+ * Context:
+ * Kernel context.
+ */
+static __inline__ int
+qla2x00_is_wwn_zero(uint8_t *wwn)
+{
+ int cnt;
+
+ for (cnt = 0; cnt < WWN_SIZE ; cnt++, wwn++) {
+ if (*wwn != 0)
+ break;
+ }
+ /* if zero return 1 */
+ if (cnt == WWN_SIZE)
+ return (1);
+ else
+ return (0);
+}
+
+static __inline__ uint8_t
+qla2x00_suspend_lun(scsi_qla_host_t *, os_lun_t *, int, int);
+static __inline__ uint8_t
+qla2x00_delay_lun(scsi_qla_host_t *, os_lun_t *, int);
+
+static __inline__ uint8_t
+qla2x00_suspend_lun(scsi_qla_host_t *ha, os_lun_t *lq, int time, int count)
+{
+ return (__qla2x00_suspend_lun(ha, lq, time, count, 0));
+}
+
+static __inline__ uint8_t
+qla2x00_delay_lun(scsi_qla_host_t *ha, os_lun_t *lq, int time)
+{
+ return (__qla2x00_suspend_lun(ha, lq, time, 1, 1));
+}
+
+static __inline__ void qla2x00_check_fabric_devices(scsi_qla_host_t *);
+/*
+ * This routine will wait for fabric devices for
+ * the reset delay.
+ */
+static __inline__ void qla2x00_check_fabric_devices(scsi_qla_host_t *ha)
+{
+ uint16_t fw_state;
+
+ qla2x00_get_firmware_state(ha, &fw_state);
+}
+
+/**
+ * qla2x00_issue_marker() - Issue a Marker IOCB if necessary.
+ * @ha: HA context
+ * @ha_locked: is function called with the hardware lock
+ *
+ * Returns non-zero if a failure occured, else zero.
+ */
+static inline int
+qla2x00_issue_marker(scsi_qla_host_t *ha, int ha_locked)
+{
+ /* Send marker if required */
+ if (ha->marker_needed != 0) {
+ if (ha_locked) {
+ if (__qla2x00_marker(ha, 0, 0, MK_SYNC_ALL) !=
+ QLA_SUCCESS)
+ return (QLA_FUNCTION_FAILED);
+ } else {
+ if (qla2x00_marker(ha, 0, 0, MK_SYNC_ALL) !=
+ QLA_SUCCESS)
+ return (QLA_FUNCTION_FAILED);
+ }
+ ha->marker_needed = 0;
+ }
+ return (QLA_SUCCESS);
+}
+
+static __inline__ void qla2x00_add_timer_to_cmd(srb_t *, int);
+static __inline__ void qla2x00_delete_timer_from_cmd(srb_t *);
+
+/**************************************************************************
+* qla2x00_add_timer_to_cmd
+*
+* Description:
+* Creates a timer for the specified command. The timeout is usually
+* the command time from kernel minus 2 secs.
+*
+* Input:
+* sp - pointer to validate
+*
+* Returns:
+* None.
+**************************************************************************/
+static inline void
+qla2x00_add_timer_to_cmd(srb_t *sp, int timeout)
+{
+ init_timer(&sp->timer);
+ sp->timer.expires = jiffies + timeout * HZ;
+ sp->timer.data = (unsigned long) sp;
+ sp->timer.function = (void (*) (unsigned long))qla2x00_cmd_timeout;
+ add_timer(&sp->timer);
+}
+
+/**************************************************************************
+* qla2x00_delete_timer_from_cmd
+*
+* Description:
+* Delete the timer for the specified command.
+*
+* Input:
+* sp - pointer to validate
+*
+* Returns:
+* None.
+**************************************************************************/
+static inline void
+qla2x00_delete_timer_from_cmd(srb_t *sp)
+{
+ if (sp->timer.function != NULL) {
+ del_timer(&sp->timer);
+ sp->timer.function = NULL;
+ sp->timer.data = (unsigned long) NULL;
+ }
+}
+