Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/drivers/scsi/sata_nv.c b/drivers/scsi/sata_nv.c
new file mode 100644
index 0000000..69009f8
--- /dev/null
+++ b/drivers/scsi/sata_nv.c
@@ -0,0 +1,570 @@
+/*
+ * sata_nv.c - NVIDIA nForce SATA
+ *
+ * Copyright 2004 NVIDIA Corp. All rights reserved.
+ * Copyright 2004 Andrew Chew
+ *
+ * The contents of this file are subject to the Open
+ * Software License version 1.1 that can be found at
+ * http://www.opensource.org/licenses/osl-1.1.txt and is included herein
+ * by reference.
+ *
+ * Alternatively, the contents of this file may be used under the terms
+ * of the GNU General Public License version 2 (the "GPL") as distributed
+ * in the kernel source COPYING file, in which case the provisions of
+ * the GPL are applicable instead of the above. If you wish to allow
+ * the use of your version of this file only under the terms of the
+ * GPL and not to allow others to use your version of this file under
+ * the OSL, indicate your decision by deleting the provisions above and
+ * replace them with the notice and other provisions required by the GPL.
+ * If you do not delete the provisions above, a recipient may use your
+ * version of this file under either the OSL or the GPL.
+ *
+ * 0.06
+ * - Added generic SATA support by using a pci_device_id that filters on
+ * the IDE storage class code.
+ *
+ * 0.03
+ * - Fixed a bug where the hotplug handlers for non-CK804/MCP04 were using
+ * mmio_base, which is only set for the CK804/MCP04 case.
+ *
+ * 0.02
+ * - Added support for CK804 SATA controller.
+ *
+ * 0.01
+ * - Initial revision.
+ */
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include "scsi.h"
+#include <scsi/scsi_host.h>
+#include <linux/libata.h>
+
+#define DRV_NAME "sata_nv"
+#define DRV_VERSION "0.6"
+
+#define NV_PORTS 2
+#define NV_PIO_MASK 0x1f
+#define NV_MWDMA_MASK 0x07
+#define NV_UDMA_MASK 0x7f
+#define NV_PORT0_SCR_REG_OFFSET 0x00
+#define NV_PORT1_SCR_REG_OFFSET 0x40
+
+#define NV_INT_STATUS 0x10
+#define NV_INT_STATUS_CK804 0x440
+#define NV_INT_STATUS_PDEV_INT 0x01
+#define NV_INT_STATUS_PDEV_PM 0x02
+#define NV_INT_STATUS_PDEV_ADDED 0x04
+#define NV_INT_STATUS_PDEV_REMOVED 0x08
+#define NV_INT_STATUS_SDEV_INT 0x10
+#define NV_INT_STATUS_SDEV_PM 0x20
+#define NV_INT_STATUS_SDEV_ADDED 0x40
+#define NV_INT_STATUS_SDEV_REMOVED 0x80
+#define NV_INT_STATUS_PDEV_HOTPLUG (NV_INT_STATUS_PDEV_ADDED | \
+ NV_INT_STATUS_PDEV_REMOVED)
+#define NV_INT_STATUS_SDEV_HOTPLUG (NV_INT_STATUS_SDEV_ADDED | \
+ NV_INT_STATUS_SDEV_REMOVED)
+#define NV_INT_STATUS_HOTPLUG (NV_INT_STATUS_PDEV_HOTPLUG | \
+ NV_INT_STATUS_SDEV_HOTPLUG)
+
+#define NV_INT_ENABLE 0x11
+#define NV_INT_ENABLE_CK804 0x441
+#define NV_INT_ENABLE_PDEV_MASK 0x01
+#define NV_INT_ENABLE_PDEV_PM 0x02
+#define NV_INT_ENABLE_PDEV_ADDED 0x04
+#define NV_INT_ENABLE_PDEV_REMOVED 0x08
+#define NV_INT_ENABLE_SDEV_MASK 0x10
+#define NV_INT_ENABLE_SDEV_PM 0x20
+#define NV_INT_ENABLE_SDEV_ADDED 0x40
+#define NV_INT_ENABLE_SDEV_REMOVED 0x80
+#define NV_INT_ENABLE_PDEV_HOTPLUG (NV_INT_ENABLE_PDEV_ADDED | \
+ NV_INT_ENABLE_PDEV_REMOVED)
+#define NV_INT_ENABLE_SDEV_HOTPLUG (NV_INT_ENABLE_SDEV_ADDED | \
+ NV_INT_ENABLE_SDEV_REMOVED)
+#define NV_INT_ENABLE_HOTPLUG (NV_INT_ENABLE_PDEV_HOTPLUG | \
+ NV_INT_ENABLE_SDEV_HOTPLUG)
+
+#define NV_INT_CONFIG 0x12
+#define NV_INT_CONFIG_METHD 0x01 // 0 = INT, 1 = SMI
+
+// For PCI config register 20
+#define NV_MCP_SATA_CFG_20 0x50
+#define NV_MCP_SATA_CFG_20_SATA_SPACE_EN 0x04
+
+static int nv_init_one (struct pci_dev *pdev, const struct pci_device_id *ent);
+static irqreturn_t nv_interrupt (int irq, void *dev_instance,
+ struct pt_regs *regs);
+static u32 nv_scr_read (struct ata_port *ap, unsigned int sc_reg);
+static void nv_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val);
+static void nv_host_stop (struct ata_host_set *host_set);
+static void nv_enable_hotplug(struct ata_probe_ent *probe_ent);
+static void nv_disable_hotplug(struct ata_host_set *host_set);
+static void nv_check_hotplug(struct ata_host_set *host_set);
+static void nv_enable_hotplug_ck804(struct ata_probe_ent *probe_ent);
+static void nv_disable_hotplug_ck804(struct ata_host_set *host_set);
+static void nv_check_hotplug_ck804(struct ata_host_set *host_set);
+
+enum nv_host_type
+{
+ GENERIC,
+ NFORCE2,
+ NFORCE3,
+ CK804
+};
+
+static struct pci_device_id nv_pci_tbl[] = {
+ { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2S_SATA,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, NFORCE2 },
+ { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, NFORCE3 },
+ { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA2,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, NFORCE3 },
+ { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_SATA,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, CK804 },
+ { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_SATA2,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, CK804 },
+ { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_SATA,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, CK804 },
+ { PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_SATA2,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, CK804 },
+ { PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID,
+ PCI_ANY_ID, PCI_ANY_ID,
+ PCI_CLASS_STORAGE_IDE<<8, 0xffff00, GENERIC },
+ { 0, } /* terminate list */
+};
+
+#define NV_HOST_FLAGS_SCR_MMIO 0x00000001
+
+struct nv_host_desc
+{
+ enum nv_host_type host_type;
+ void (*enable_hotplug)(struct ata_probe_ent *probe_ent);
+ void (*disable_hotplug)(struct ata_host_set *host_set);
+ void (*check_hotplug)(struct ata_host_set *host_set);
+
+};
+static struct nv_host_desc nv_device_tbl[] = {
+ {
+ .host_type = GENERIC,
+ .enable_hotplug = NULL,
+ .disable_hotplug= NULL,
+ .check_hotplug = NULL,
+ },
+ {
+ .host_type = NFORCE2,
+ .enable_hotplug = nv_enable_hotplug,
+ .disable_hotplug= nv_disable_hotplug,
+ .check_hotplug = nv_check_hotplug,
+ },
+ {
+ .host_type = NFORCE3,
+ .enable_hotplug = nv_enable_hotplug,
+ .disable_hotplug= nv_disable_hotplug,
+ .check_hotplug = nv_check_hotplug,
+ },
+ { .host_type = CK804,
+ .enable_hotplug = nv_enable_hotplug_ck804,
+ .disable_hotplug= nv_disable_hotplug_ck804,
+ .check_hotplug = nv_check_hotplug_ck804,
+ },
+};
+
+struct nv_host
+{
+ struct nv_host_desc *host_desc;
+ unsigned long host_flags;
+};
+
+static struct pci_driver nv_pci_driver = {
+ .name = DRV_NAME,
+ .id_table = nv_pci_tbl,
+ .probe = nv_init_one,
+ .remove = ata_pci_remove_one,
+};
+
+static Scsi_Host_Template nv_sht = {
+ .module = THIS_MODULE,
+ .name = DRV_NAME,
+ .ioctl = ata_scsi_ioctl,
+ .queuecommand = ata_scsi_queuecmd,
+ .eh_strategy_handler = ata_scsi_error,
+ .can_queue = ATA_DEF_QUEUE,
+ .this_id = ATA_SHT_THIS_ID,
+ .sg_tablesize = LIBATA_MAX_PRD,
+ .max_sectors = ATA_MAX_SECTORS,
+ .cmd_per_lun = ATA_SHT_CMD_PER_LUN,
+ .emulated = ATA_SHT_EMULATED,
+ .use_clustering = ATA_SHT_USE_CLUSTERING,
+ .proc_name = DRV_NAME,
+ .dma_boundary = ATA_DMA_BOUNDARY,
+ .slave_configure = ata_scsi_slave_config,
+ .bios_param = ata_std_bios_param,
+ .ordered_flush = 1,
+};
+
+static struct ata_port_operations nv_ops = {
+ .port_disable = ata_port_disable,
+ .tf_load = ata_tf_load,
+ .tf_read = ata_tf_read,
+ .exec_command = ata_exec_command,
+ .check_status = ata_check_status,
+ .dev_select = ata_std_dev_select,
+ .phy_reset = sata_phy_reset,
+ .bmdma_setup = ata_bmdma_setup,
+ .bmdma_start = ata_bmdma_start,
+ .bmdma_stop = ata_bmdma_stop,
+ .bmdma_status = ata_bmdma_status,
+ .qc_prep = ata_qc_prep,
+ .qc_issue = ata_qc_issue_prot,
+ .eng_timeout = ata_eng_timeout,
+ .irq_handler = nv_interrupt,
+ .irq_clear = ata_bmdma_irq_clear,
+ .scr_read = nv_scr_read,
+ .scr_write = nv_scr_write,
+ .port_start = ata_port_start,
+ .port_stop = ata_port_stop,
+ .host_stop = nv_host_stop,
+};
+
+/* FIXME: The hardware provides the necessary SATA PHY controls
+ * to support ATA_FLAG_SATA_RESET. However, it is currently
+ * necessary to disable that flag, to solve misdetection problems.
+ * See http://bugme.osdl.org/show_bug.cgi?id=3352 for more info.
+ *
+ * This problem really needs to be investigated further. But in the
+ * meantime, we avoid ATA_FLAG_SATA_RESET to get people working.
+ */
+static struct ata_port_info nv_port_info = {
+ .sht = &nv_sht,
+ .host_flags = ATA_FLAG_SATA |
+ /* ATA_FLAG_SATA_RESET | */
+ ATA_FLAG_SRST |
+ ATA_FLAG_NO_LEGACY,
+ .pio_mask = NV_PIO_MASK,
+ .mwdma_mask = NV_MWDMA_MASK,
+ .udma_mask = NV_UDMA_MASK,
+ .port_ops = &nv_ops,
+};
+
+MODULE_AUTHOR("NVIDIA");
+MODULE_DESCRIPTION("low-level driver for NVIDIA nForce SATA controller");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(pci, nv_pci_tbl);
+MODULE_VERSION(DRV_VERSION);
+
+static irqreturn_t nv_interrupt (int irq, void *dev_instance,
+ struct pt_regs *regs)
+{
+ struct ata_host_set *host_set = dev_instance;
+ struct nv_host *host = host_set->private_data;
+ unsigned int i;
+ unsigned int handled = 0;
+ unsigned long flags;
+
+ spin_lock_irqsave(&host_set->lock, flags);
+
+ for (i = 0; i < host_set->n_ports; i++) {
+ struct ata_port *ap;
+
+ ap = host_set->ports[i];
+ if (ap && (!(ap->flags & ATA_FLAG_PORT_DISABLED))) {
+ struct ata_queued_cmd *qc;
+
+ qc = ata_qc_from_tag(ap, ap->active_tag);
+ if (qc && (!(qc->tf.ctl & ATA_NIEN)))
+ handled += ata_host_intr(ap, qc);
+ }
+
+ }
+
+ if (host->host_desc->check_hotplug)
+ host->host_desc->check_hotplug(host_set);
+
+ spin_unlock_irqrestore(&host_set->lock, flags);
+
+ return IRQ_RETVAL(handled);
+}
+
+static u32 nv_scr_read (struct ata_port *ap, unsigned int sc_reg)
+{
+ struct ata_host_set *host_set = ap->host_set;
+ struct nv_host *host = host_set->private_data;
+
+ if (sc_reg > SCR_CONTROL)
+ return 0xffffffffU;
+
+ if (host->host_flags & NV_HOST_FLAGS_SCR_MMIO)
+ return readl((void*)ap->ioaddr.scr_addr + (sc_reg * 4));
+ else
+ return inl(ap->ioaddr.scr_addr + (sc_reg * 4));
+}
+
+static void nv_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val)
+{
+ struct ata_host_set *host_set = ap->host_set;
+ struct nv_host *host = host_set->private_data;
+
+ if (sc_reg > SCR_CONTROL)
+ return;
+
+ if (host->host_flags & NV_HOST_FLAGS_SCR_MMIO)
+ writel(val, (void*)ap->ioaddr.scr_addr + (sc_reg * 4));
+ else
+ outl(val, ap->ioaddr.scr_addr + (sc_reg * 4));
+}
+
+static void nv_host_stop (struct ata_host_set *host_set)
+{
+ struct nv_host *host = host_set->private_data;
+
+ // Disable hotplug event interrupts.
+ if (host->host_desc->disable_hotplug)
+ host->host_desc->disable_hotplug(host_set);
+
+ kfree(host);
+}
+
+static int nv_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+ static int printed_version = 0;
+ struct nv_host *host;
+ struct ata_port_info *ppi;
+ struct ata_probe_ent *probe_ent;
+ int pci_dev_busy = 0;
+ int rc;
+ u32 bar;
+
+ // Make sure this is a SATA controller by counting the number of bars
+ // (NVIDIA SATA controllers will always have six bars). Otherwise,
+ // it's an IDE controller and we ignore it.
+ for (bar=0; bar<6; bar++)
+ if (pci_resource_start(pdev, bar) == 0)
+ return -ENODEV;
+
+ if (!printed_version++)
+ printk(KERN_DEBUG DRV_NAME " version " DRV_VERSION "\n");
+
+ rc = pci_enable_device(pdev);
+ if (rc)
+ goto err_out;
+
+ rc = pci_request_regions(pdev, DRV_NAME);
+ if (rc) {
+ pci_dev_busy = 1;
+ goto err_out_disable;
+ }
+
+ rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
+ if (rc)
+ goto err_out_regions;
+ rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK);
+ if (rc)
+ goto err_out_regions;
+
+ rc = -ENOMEM;
+
+ ppi = &nv_port_info;
+ probe_ent = ata_pci_init_native_mode(pdev, &ppi);
+ if (!probe_ent)
+ goto err_out_regions;
+
+ host = kmalloc(sizeof(struct nv_host), GFP_KERNEL);
+ if (!host)
+ goto err_out_free_ent;
+
+ memset(host, 0, sizeof(struct nv_host));
+ host->host_desc = &nv_device_tbl[ent->driver_data];
+
+ probe_ent->private_data = host;
+
+ if (pci_resource_flags(pdev, 5) & IORESOURCE_MEM)
+ host->host_flags |= NV_HOST_FLAGS_SCR_MMIO;
+
+ if (host->host_flags & NV_HOST_FLAGS_SCR_MMIO) {
+ unsigned long base;
+
+ probe_ent->mmio_base = ioremap(pci_resource_start(pdev, 5),
+ pci_resource_len(pdev, 5));
+ if (probe_ent->mmio_base == NULL) {
+ rc = -EIO;
+ goto err_out_free_host;
+ }
+
+ base = (unsigned long)probe_ent->mmio_base;
+
+ probe_ent->port[0].scr_addr =
+ base + NV_PORT0_SCR_REG_OFFSET;
+ probe_ent->port[1].scr_addr =
+ base + NV_PORT1_SCR_REG_OFFSET;
+ } else {
+
+ probe_ent->port[0].scr_addr =
+ pci_resource_start(pdev, 5) | NV_PORT0_SCR_REG_OFFSET;
+ probe_ent->port[1].scr_addr =
+ pci_resource_start(pdev, 5) | NV_PORT1_SCR_REG_OFFSET;
+ }
+
+ pci_set_master(pdev);
+
+ rc = ata_device_add(probe_ent);
+ if (rc != NV_PORTS)
+ goto err_out_iounmap;
+
+ // Enable hotplug event interrupts.
+ if (host->host_desc->enable_hotplug)
+ host->host_desc->enable_hotplug(probe_ent);
+
+ kfree(probe_ent);
+
+ return 0;
+
+err_out_iounmap:
+ if (host->host_flags & NV_HOST_FLAGS_SCR_MMIO)
+ iounmap(probe_ent->mmio_base);
+err_out_free_host:
+ kfree(host);
+err_out_free_ent:
+ kfree(probe_ent);
+err_out_regions:
+ pci_release_regions(pdev);
+err_out_disable:
+ if (!pci_dev_busy)
+ pci_disable_device(pdev);
+err_out:
+ return rc;
+}
+
+static void nv_enable_hotplug(struct ata_probe_ent *probe_ent)
+{
+ u8 intr_mask;
+
+ outb(NV_INT_STATUS_HOTPLUG,
+ probe_ent->port[0].scr_addr + NV_INT_STATUS);
+
+ intr_mask = inb(probe_ent->port[0].scr_addr + NV_INT_ENABLE);
+ intr_mask |= NV_INT_ENABLE_HOTPLUG;
+
+ outb(intr_mask, probe_ent->port[0].scr_addr + NV_INT_ENABLE);
+}
+
+static void nv_disable_hotplug(struct ata_host_set *host_set)
+{
+ u8 intr_mask;
+
+ intr_mask = inb(host_set->ports[0]->ioaddr.scr_addr + NV_INT_ENABLE);
+
+ intr_mask &= ~(NV_INT_ENABLE_HOTPLUG);
+
+ outb(intr_mask, host_set->ports[0]->ioaddr.scr_addr + NV_INT_ENABLE);
+}
+
+static void nv_check_hotplug(struct ata_host_set *host_set)
+{
+ u8 intr_status;
+
+ intr_status = inb(host_set->ports[0]->ioaddr.scr_addr + NV_INT_STATUS);
+
+ // Clear interrupt status.
+ outb(0xff, host_set->ports[0]->ioaddr.scr_addr + NV_INT_STATUS);
+
+ if (intr_status & NV_INT_STATUS_HOTPLUG) {
+ if (intr_status & NV_INT_STATUS_PDEV_ADDED)
+ printk(KERN_WARNING "nv_sata: "
+ "Primary device added\n");
+
+ if (intr_status & NV_INT_STATUS_PDEV_REMOVED)
+ printk(KERN_WARNING "nv_sata: "
+ "Primary device removed\n");
+
+ if (intr_status & NV_INT_STATUS_SDEV_ADDED)
+ printk(KERN_WARNING "nv_sata: "
+ "Secondary device added\n");
+
+ if (intr_status & NV_INT_STATUS_SDEV_REMOVED)
+ printk(KERN_WARNING "nv_sata: "
+ "Secondary device removed\n");
+ }
+}
+
+static void nv_enable_hotplug_ck804(struct ata_probe_ent *probe_ent)
+{
+ struct pci_dev *pdev = to_pci_dev(probe_ent->dev);
+ u8 intr_mask;
+ u8 regval;
+
+ pci_read_config_byte(pdev, NV_MCP_SATA_CFG_20, ®val);
+ regval |= NV_MCP_SATA_CFG_20_SATA_SPACE_EN;
+ pci_write_config_byte(pdev, NV_MCP_SATA_CFG_20, regval);
+
+ writeb(NV_INT_STATUS_HOTPLUG, probe_ent->mmio_base + NV_INT_STATUS_CK804);
+
+ intr_mask = readb(probe_ent->mmio_base + NV_INT_ENABLE_CK804);
+ intr_mask |= NV_INT_ENABLE_HOTPLUG;
+
+ writeb(intr_mask, probe_ent->mmio_base + NV_INT_ENABLE_CK804);
+}
+
+static void nv_disable_hotplug_ck804(struct ata_host_set *host_set)
+{
+ struct pci_dev *pdev = to_pci_dev(host_set->dev);
+ u8 intr_mask;
+ u8 regval;
+
+ intr_mask = readb(host_set->mmio_base + NV_INT_ENABLE_CK804);
+
+ intr_mask &= ~(NV_INT_ENABLE_HOTPLUG);
+
+ writeb(intr_mask, host_set->mmio_base + NV_INT_ENABLE_CK804);
+
+ pci_read_config_byte(pdev, NV_MCP_SATA_CFG_20, ®val);
+ regval &= ~NV_MCP_SATA_CFG_20_SATA_SPACE_EN;
+ pci_write_config_byte(pdev, NV_MCP_SATA_CFG_20, regval);
+}
+
+static void nv_check_hotplug_ck804(struct ata_host_set *host_set)
+{
+ u8 intr_status;
+
+ intr_status = readb(host_set->mmio_base + NV_INT_STATUS_CK804);
+
+ // Clear interrupt status.
+ writeb(0xff, host_set->mmio_base + NV_INT_STATUS_CK804);
+
+ if (intr_status & NV_INT_STATUS_HOTPLUG) {
+ if (intr_status & NV_INT_STATUS_PDEV_ADDED)
+ printk(KERN_WARNING "nv_sata: "
+ "Primary device added\n");
+
+ if (intr_status & NV_INT_STATUS_PDEV_REMOVED)
+ printk(KERN_WARNING "nv_sata: "
+ "Primary device removed\n");
+
+ if (intr_status & NV_INT_STATUS_SDEV_ADDED)
+ printk(KERN_WARNING "nv_sata: "
+ "Secondary device added\n");
+
+ if (intr_status & NV_INT_STATUS_SDEV_REMOVED)
+ printk(KERN_WARNING "nv_sata: "
+ "Secondary device removed\n");
+ }
+}
+
+static int __init nv_init(void)
+{
+ return pci_module_init(&nv_pci_driver);
+}
+
+static void __exit nv_exit(void)
+{
+ pci_unregister_driver(&nv_pci_driver);
+}
+
+module_init(nv_init);
+module_exit(nv_exit);