Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c
new file mode 100644
index 0000000..d273134
--- /dev/null
+++ b/drivers/serial/imx.c
@@ -0,0 +1,909 @@
+/*
+ * linux/drivers/serial/imx.c
+ *
+ * Driver for Motorola IMX serial ports
+ *
+ * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
+ *
+ * Author: Sascha Hauer <sascha@saschahauer.de>
+ * Copyright (C) 2004 Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * [29-Mar-2005] Mike Lee
+ * Added hardware handshake
+ */
+#include <linux/config.h>
+
+#if defined(CONFIG_SERIAL_IMX_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
+#define SUPPORT_SYSRQ
+#endif
+
+#include <linux/module.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/console.h>
+#include <linux/sysrq.h>
+#include <linux/device.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/serial_core.h>
+#include <linux/serial.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/hardware.h>
+
+/* We've been assigned a range on the "Low-density serial ports" major */
+#define SERIAL_IMX_MAJOR 204
+#define MINOR_START 41
+
+#define NR_PORTS 2
+
+#define IMX_ISR_PASS_LIMIT 256
+
+/*
+ * This is the size of our serial port register set.
+ */
+#define UART_PORT_SIZE 0x100
+
+/*
+ * This determines how often we check the modem status signals
+ * for any change. They generally aren't connected to an IRQ
+ * so we have to poll them. We also check immediately before
+ * filling the TX fifo incase CTS has been dropped.
+ */
+#define MCTRL_TIMEOUT (250*HZ/1000)
+
+#define DRIVER_NAME "IMX-uart"
+
+struct imx_port {
+ struct uart_port port;
+ struct timer_list timer;
+ unsigned int old_status;
+ int txirq,rxirq;
+};
+
+/*
+ * Handle any change of modem status signal since we were last called.
+ */
+static void imx_mctrl_check(struct imx_port *sport)
+{
+ unsigned int status, changed;
+
+ status = sport->port.ops->get_mctrl(&sport->port);
+ changed = status ^ sport->old_status;
+
+ if (changed == 0)
+ return;
+
+ sport->old_status = status;
+
+ if (changed & TIOCM_RI)
+ sport->port.icount.rng++;
+ if (changed & TIOCM_DSR)
+ sport->port.icount.dsr++;
+ if (changed & TIOCM_CAR)
+ uart_handle_dcd_change(&sport->port, status & TIOCM_CAR);
+ if (changed & TIOCM_CTS)
+ uart_handle_cts_change(&sport->port, status & TIOCM_CTS);
+
+ wake_up_interruptible(&sport->port.info->delta_msr_wait);
+}
+
+/*
+ * This is our per-port timeout handler, for checking the
+ * modem status signals.
+ */
+static void imx_timeout(unsigned long data)
+{
+ struct imx_port *sport = (struct imx_port *)data;
+ unsigned long flags;
+
+ if (sport->port.info) {
+ spin_lock_irqsave(&sport->port.lock, flags);
+ imx_mctrl_check(sport);
+ spin_unlock_irqrestore(&sport->port.lock, flags);
+
+ mod_timer(&sport->timer, jiffies + MCTRL_TIMEOUT);
+ }
+}
+
+/*
+ * interrupts disabled on entry
+ */
+static void imx_stop_tx(struct uart_port *port, unsigned int tty_stop)
+{
+ struct imx_port *sport = (struct imx_port *)port;
+ UCR1((u32)sport->port.membase) &= ~UCR1_TXMPTYEN;
+}
+
+/*
+ * interrupts disabled on entry
+ */
+static void imx_stop_rx(struct uart_port *port)
+{
+ struct imx_port *sport = (struct imx_port *)port;
+ UCR2((u32)sport->port.membase) &= ~UCR2_RXEN;
+}
+
+/*
+ * Set the modem control timer to fire immediately.
+ */
+static void imx_enable_ms(struct uart_port *port)
+{
+ struct imx_port *sport = (struct imx_port *)port;
+
+ mod_timer(&sport->timer, jiffies);
+}
+
+static inline void imx_transmit_buffer(struct imx_port *sport)
+{
+ struct circ_buf *xmit = &sport->port.info->xmit;
+
+ do {
+ /* send xmit->buf[xmit->tail]
+ * out the port here */
+ URTX0((u32)sport->port.membase) = xmit->buf[xmit->tail];
+ xmit->tail = (xmit->tail + 1) &
+ (UART_XMIT_SIZE - 1);
+ sport->port.icount.tx++;
+ if (uart_circ_empty(xmit))
+ break;
+ } while (!(UTS((u32)sport->port.membase) & UTS_TXFULL));
+
+ if (uart_circ_empty(xmit))
+ imx_stop_tx(&sport->port, 0);
+}
+
+/*
+ * interrupts disabled on entry
+ */
+static void imx_start_tx(struct uart_port *port, unsigned int tty_start)
+{
+ struct imx_port *sport = (struct imx_port *)port;
+
+ UCR1((u32)sport->port.membase) |= UCR1_TXMPTYEN;
+
+ if(UTS((u32)sport->port.membase) & UTS_TXEMPTY)
+ imx_transmit_buffer(sport);
+}
+
+static irqreturn_t imx_txint(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct imx_port *sport = (struct imx_port *)dev_id;
+ struct circ_buf *xmit = &sport->port.info->xmit;
+ unsigned long flags;
+
+ spin_lock_irqsave(&sport->port.lock,flags);
+ if (sport->port.x_char)
+ {
+ /* Send next char */
+ URTX0((u32)sport->port.membase) = sport->port.x_char;
+ goto out;
+ }
+
+ if (uart_circ_empty(xmit) || uart_tx_stopped(&sport->port)) {
+ imx_stop_tx(&sport->port, 0);
+ goto out;
+ }
+
+ imx_transmit_buffer(sport);
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(&sport->port);
+
+out:
+ spin_unlock_irqrestore(&sport->port.lock,flags);
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t imx_rxint(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct imx_port *sport = dev_id;
+ unsigned int rx,flg,ignored = 0;
+ struct tty_struct *tty = sport->port.info->tty;
+ unsigned long flags;
+
+ rx = URXD0((u32)sport->port.membase);
+ spin_lock_irqsave(&sport->port.lock,flags);
+
+ do {
+ flg = TTY_NORMAL;
+ sport->port.icount.rx++;
+
+ if( USR2((u32)sport->port.membase) & USR2_BRCD ) {
+ USR2((u32)sport->port.membase) |= USR2_BRCD;
+ if(uart_handle_break(&sport->port))
+ goto ignore_char;
+ }
+
+ if (uart_handle_sysrq_char
+ (&sport->port, (unsigned char)rx, regs))
+ goto ignore_char;
+
+ if( rx & (URXD_PRERR | URXD_OVRRUN | URXD_FRMERR) )
+ goto handle_error;
+
+ error_return:
+ tty_insert_flip_char(tty, rx, flg);
+
+ if (tty->flip.count >= TTY_FLIPBUF_SIZE)
+ goto out;
+
+ ignore_char:
+ rx = URXD0((u32)sport->port.membase);
+ } while(rx & URXD_CHARRDY);
+
+out:
+ spin_unlock_irqrestore(&sport->port.lock,flags);
+ tty_flip_buffer_push(tty);
+ return IRQ_HANDLED;
+
+handle_error:
+ if (rx & URXD_PRERR)
+ sport->port.icount.parity++;
+ else if (rx & URXD_FRMERR)
+ sport->port.icount.frame++;
+ if (rx & URXD_OVRRUN)
+ sport->port.icount.overrun++;
+
+ if (rx & sport->port.ignore_status_mask) {
+ if (++ignored > 100)
+ goto out;
+ goto ignore_char;
+ }
+
+ rx &= sport->port.read_status_mask;
+
+ if (rx & URXD_PRERR)
+ flg = TTY_PARITY;
+ else if (rx & URXD_FRMERR)
+ flg = TTY_FRAME;
+ if (rx & URXD_OVRRUN)
+ flg = TTY_OVERRUN;
+
+#ifdef SUPPORT_SYSRQ
+ sport->port.sysrq = 0;
+#endif
+ goto error_return;
+}
+
+/*
+ * Return TIOCSER_TEMT when transmitter is not busy.
+ */
+static unsigned int imx_tx_empty(struct uart_port *port)
+{
+ struct imx_port *sport = (struct imx_port *)port;
+
+ return USR2((u32)sport->port.membase) & USR2_TXDC ? TIOCSER_TEMT : 0;
+}
+
+static unsigned int imx_get_mctrl(struct uart_port *port)
+{
+ return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
+}
+
+static void imx_set_mctrl(struct uart_port *port, unsigned int mctrl)
+{
+}
+
+/*
+ * Interrupts always disabled.
+ */
+static void imx_break_ctl(struct uart_port *port, int break_state)
+{
+ struct imx_port *sport = (struct imx_port *)port;
+ unsigned long flags;
+
+ spin_lock_irqsave(&sport->port.lock, flags);
+
+ if ( break_state != 0 )
+ UCR1((u32)sport->port.membase) |= UCR1_SNDBRK;
+ else
+ UCR1((u32)sport->port.membase) &= ~UCR1_SNDBRK;
+
+ spin_unlock_irqrestore(&sport->port.lock, flags);
+}
+
+#define TXTL 2 /* reset default */
+#define RXTL 1 /* reset default */
+
+static int imx_startup(struct uart_port *port)
+{
+ struct imx_port *sport = (struct imx_port *)port;
+ int retval;
+ unsigned int val;
+ unsigned long flags;
+
+ /* set receiver / transmitter trigger level. We assume
+ * that RFDIV has been set by the arch setup or by the bootloader.
+ */
+ val = (UFCR((u32)sport->port.membase) & UFCR_RFDIV) | TXTL<<10 | RXTL;
+ UFCR((u32)sport->port.membase) = val;
+
+ /* disable the DREN bit (Data Ready interrupt enable) before
+ * requesting IRQs
+ */
+ UCR4((u32)sport->port.membase) &= ~UCR4_DREN;
+
+ /*
+ * Allocate the IRQ
+ */
+ retval = request_irq(sport->rxirq, imx_rxint, 0,
+ DRIVER_NAME, sport);
+ if (retval) goto error_out2;
+
+ retval = request_irq(sport->txirq, imx_txint, 0,
+ "imx-uart", sport);
+ if (retval) goto error_out1;
+
+ /*
+ * Finally, clear and enable interrupts
+ */
+
+ UCR1((u32)sport->port.membase) |=
+ (UCR1_TXMPTYEN | UCR1_RRDYEN | UCR1_UARTEN);
+
+ UCR2((u32)sport->port.membase) |= (UCR2_RXEN | UCR2_TXEN);
+ /*
+ * Enable modem status interrupts
+ */
+ spin_lock_irqsave(&sport->port.lock,flags);
+ imx_enable_ms(&sport->port);
+ spin_unlock_irqrestore(&sport->port.lock,flags);
+
+ return 0;
+
+error_out1:
+ free_irq(sport->rxirq, sport);
+error_out2:
+ free_irq(sport->txirq, sport);
+ return retval;
+}
+
+static void imx_shutdown(struct uart_port *port)
+{
+ struct imx_port *sport = (struct imx_port *)port;
+
+ /*
+ * Stop our timer.
+ */
+ del_timer_sync(&sport->timer);
+
+ /*
+ * Free the interrupts
+ */
+ free_irq(sport->txirq, sport);
+ free_irq(sport->rxirq, sport);
+
+ /*
+ * Disable all interrupts, port and break condition.
+ */
+
+ UCR1((u32)sport->port.membase) &=
+ ~(UCR1_TXMPTYEN | UCR1_RRDYEN | UCR1_UARTEN);
+}
+
+static void
+imx_set_termios(struct uart_port *port, struct termios *termios,
+ struct termios *old)
+{
+ struct imx_port *sport = (struct imx_port *)port;
+ unsigned long flags;
+ unsigned int ucr2, old_ucr1, old_txrxen, baud, quot;
+ unsigned int old_csize = old ? old->c_cflag & CSIZE : CS8;
+
+ /*
+ * If we don't support modem control lines, don't allow
+ * these to be set.
+ */
+ if (0) {
+ termios->c_cflag &= ~(HUPCL | CRTSCTS | CMSPAR);
+ termios->c_cflag |= CLOCAL;
+ }
+
+ /*
+ * We only support CS7 and CS8.
+ */
+ while ((termios->c_cflag & CSIZE) != CS7 &&
+ (termios->c_cflag & CSIZE) != CS8) {
+ termios->c_cflag &= ~CSIZE;
+ termios->c_cflag |= old_csize;
+ old_csize = CS8;
+ }
+
+ if ((termios->c_cflag & CSIZE) == CS8)
+ ucr2 = UCR2_WS | UCR2_SRST | UCR2_IRTS;
+ else
+ ucr2 = UCR2_SRST | UCR2_IRTS;
+
+ if (termios->c_cflag & CRTSCTS) {
+ ucr2 &= ~UCR2_IRTS;
+ ucr2 |= UCR2_CTSC;
+ }
+
+ if (termios->c_cflag & CSTOPB)
+ ucr2 |= UCR2_STPB;
+ if (termios->c_cflag & PARENB) {
+ ucr2 |= UCR2_PREN;
+ if (!(termios->c_cflag & PARODD))
+ ucr2 |= UCR2_PROE;
+ }
+
+ /*
+ * Ask the core to calculate the divisor for us.
+ */
+ baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
+ quot = uart_get_divisor(port, baud);
+
+ spin_lock_irqsave(&sport->port.lock, flags);
+
+ sport->port.read_status_mask = 0;
+ if (termios->c_iflag & INPCK)
+ sport->port.read_status_mask |= (URXD_FRMERR | URXD_PRERR);
+ if (termios->c_iflag & (BRKINT | PARMRK))
+ sport->port.read_status_mask |= URXD_BRK;
+
+ /*
+ * Characters to ignore
+ */
+ sport->port.ignore_status_mask = 0;
+ if (termios->c_iflag & IGNPAR)
+ sport->port.ignore_status_mask |= URXD_PRERR;
+ if (termios->c_iflag & IGNBRK) {
+ sport->port.ignore_status_mask |= URXD_BRK;
+ /*
+ * If we're ignoring parity and break indicators,
+ * ignore overruns too (for real raw support).
+ */
+ if (termios->c_iflag & IGNPAR)
+ sport->port.ignore_status_mask |= URXD_OVRRUN;
+ }
+
+ del_timer_sync(&sport->timer);
+
+ /*
+ * Update the per-port timeout.
+ */
+ uart_update_timeout(port, termios->c_cflag, baud);
+
+ /*
+ * disable interrupts and drain transmitter
+ */
+ old_ucr1 = UCR1((u32)sport->port.membase);
+ UCR1((u32)sport->port.membase) &= ~(UCR1_TXMPTYEN | UCR1_RRDYEN);
+
+ while ( !(USR2((u32)sport->port.membase) & USR2_TXDC))
+ barrier();
+
+ /* then, disable everything */
+ old_txrxen = UCR2((u32)sport->port.membase) & ( UCR2_TXEN | UCR2_RXEN );
+ UCR2((u32)sport->port.membase) &= ~( UCR2_TXEN | UCR2_RXEN);
+
+ /* set the parity, stop bits and data size */
+ UCR2((u32)sport->port.membase) = ucr2;
+
+ /* set the baud rate. We assume uartclk = 16 MHz
+ *
+ * baud * 16 UBIR - 1
+ * --------- = --------
+ * uartclk UBMR - 1
+ */
+ UBIR((u32)sport->port.membase) = (baud / 100) - 1;
+ UBMR((u32)sport->port.membase) = 10000 - 1;
+
+ UCR1((u32)sport->port.membase) = old_ucr1;
+ UCR2((u32)sport->port.membase) |= old_txrxen;
+
+ if (UART_ENABLE_MS(&sport->port, termios->c_cflag))
+ imx_enable_ms(&sport->port);
+
+ spin_unlock_irqrestore(&sport->port.lock, flags);
+}
+
+static const char *imx_type(struct uart_port *port)
+{
+ struct imx_port *sport = (struct imx_port *)port;
+
+ return sport->port.type == PORT_IMX ? "IMX" : NULL;
+}
+
+/*
+ * Release the memory region(s) being used by 'port'.
+ */
+static void imx_release_port(struct uart_port *port)
+{
+ struct imx_port *sport = (struct imx_port *)port;
+
+ release_mem_region(sport->port.mapbase, UART_PORT_SIZE);
+}
+
+/*
+ * Request the memory region(s) being used by 'port'.
+ */
+static int imx_request_port(struct uart_port *port)
+{
+ struct imx_port *sport = (struct imx_port *)port;
+
+ return request_mem_region(sport->port.mapbase, UART_PORT_SIZE,
+ "imx-uart") != NULL ? 0 : -EBUSY;
+}
+
+/*
+ * Configure/autoconfigure the port.
+ */
+static void imx_config_port(struct uart_port *port, int flags)
+{
+ struct imx_port *sport = (struct imx_port *)port;
+
+ if (flags & UART_CONFIG_TYPE &&
+ imx_request_port(&sport->port) == 0)
+ sport->port.type = PORT_IMX;
+}
+
+/*
+ * Verify the new serial_struct (for TIOCSSERIAL).
+ * The only change we allow are to the flags and type, and
+ * even then only between PORT_IMX and PORT_UNKNOWN
+ */
+static int
+imx_verify_port(struct uart_port *port, struct serial_struct *ser)
+{
+ struct imx_port *sport = (struct imx_port *)port;
+ int ret = 0;
+
+ if (ser->type != PORT_UNKNOWN && ser->type != PORT_IMX)
+ ret = -EINVAL;
+ if (sport->port.irq != ser->irq)
+ ret = -EINVAL;
+ if (ser->io_type != UPIO_MEM)
+ ret = -EINVAL;
+ if (sport->port.uartclk / 16 != ser->baud_base)
+ ret = -EINVAL;
+ if ((void *)sport->port.mapbase != ser->iomem_base)
+ ret = -EINVAL;
+ if (sport->port.iobase != ser->port)
+ ret = -EINVAL;
+ if (ser->hub6 != 0)
+ ret = -EINVAL;
+ return ret;
+}
+
+static struct uart_ops imx_pops = {
+ .tx_empty = imx_tx_empty,
+ .set_mctrl = imx_set_mctrl,
+ .get_mctrl = imx_get_mctrl,
+ .stop_tx = imx_stop_tx,
+ .start_tx = imx_start_tx,
+ .stop_rx = imx_stop_rx,
+ .enable_ms = imx_enable_ms,
+ .break_ctl = imx_break_ctl,
+ .startup = imx_startup,
+ .shutdown = imx_shutdown,
+ .set_termios = imx_set_termios,
+ .type = imx_type,
+ .release_port = imx_release_port,
+ .request_port = imx_request_port,
+ .config_port = imx_config_port,
+ .verify_port = imx_verify_port,
+};
+
+static struct imx_port imx_ports[] = {
+ {
+ .txirq = UART1_MINT_TX,
+ .rxirq = UART1_MINT_RX,
+ .port = {
+ .type = PORT_IMX,
+ .iotype = SERIAL_IO_MEM,
+ .membase = (void *)IMX_UART1_BASE,
+ .mapbase = IMX_UART1_BASE, /* FIXME */
+ .irq = UART1_MINT_RX,
+ .uartclk = 16000000,
+ .fifosize = 8,
+ .flags = ASYNC_BOOT_AUTOCONF,
+ .ops = &imx_pops,
+ .line = 0,
+ },
+ }, {
+ .txirq = UART2_MINT_TX,
+ .rxirq = UART2_MINT_RX,
+ .port = {
+ .type = PORT_IMX,
+ .iotype = SERIAL_IO_MEM,
+ .membase = (void *)IMX_UART2_BASE,
+ .mapbase = IMX_UART2_BASE, /* FIXME */
+ .irq = UART2_MINT_RX,
+ .uartclk = 16000000,
+ .fifosize = 8,
+ .flags = ASYNC_BOOT_AUTOCONF,
+ .ops = &imx_pops,
+ .line = 1,
+ },
+ }
+};
+
+/*
+ * Setup the IMX serial ports.
+ * Note also that we support "console=ttySMXx" where "x" is either 0 or 1.
+ * Which serial port this ends up being depends on the machine you're
+ * running this kernel on. I'm not convinced that this is a good idea,
+ * but that's the way it traditionally works.
+ *
+ */
+static void __init imx_init_ports(void)
+{
+ static int first = 1;
+ int i;
+
+ if (!first)
+ return;
+ first = 0;
+
+ for (i = 0; i < ARRAY_SIZE(imx_ports); i++) {
+ init_timer(&imx_ports[i].timer);
+ imx_ports[i].timer.function = imx_timeout;
+ imx_ports[i].timer.data = (unsigned long)&imx_ports[i];
+ }
+
+ imx_gpio_mode(PC9_PF_UART1_CTS);
+ imx_gpio_mode(PC10_PF_UART1_RTS);
+ imx_gpio_mode(PC11_PF_UART1_TXD);
+ imx_gpio_mode(PC12_PF_UART1_RXD);
+ imx_gpio_mode(PB28_PF_UART2_CTS);
+ imx_gpio_mode(PB29_PF_UART2_RTS);
+
+ imx_gpio_mode(PB30_PF_UART2_TXD);
+ imx_gpio_mode(PB31_PF_UART2_RXD);
+
+#if 0 /* We don't need these, on the mx1 the _modem_ side of the uart
+ * is implemented.
+ */
+ imx_gpio_mode(PD7_AF_UART2_DTR);
+ imx_gpio_mode(PD8_AF_UART2_DCD);
+ imx_gpio_mode(PD9_AF_UART2_RI);
+ imx_gpio_mode(PD10_AF_UART2_DSR);
+#endif
+
+
+}
+
+#ifdef CONFIG_SERIAL_IMX_CONSOLE
+
+/*
+ * Interrupts are disabled on entering
+ */
+static void
+imx_console_write(struct console *co, const char *s, unsigned int count)
+{
+ struct imx_port *sport = &imx_ports[co->index];
+ unsigned int old_ucr1, old_ucr2, i;
+
+ /*
+ * First, save UCR1/2 and then disable interrupts
+ */
+ old_ucr1 = UCR1((u32)sport->port.membase);
+ old_ucr2 = UCR2((u32)sport->port.membase);
+
+ UCR1((u32)sport->port.membase) =
+ (old_ucr1 | UCR1_UARTCLKEN | UCR1_UARTEN)
+ & ~(UCR1_TXMPTYEN | UCR1_RRDYEN);
+ UCR2((u32)sport->port.membase) = old_ucr2 | UCR2_TXEN;
+
+ /*
+ * Now, do each character
+ */
+ for (i = 0; i < count; i++) {
+
+ while ((UTS((u32)sport->port.membase) & UTS_TXFULL))
+ barrier();
+
+ URTX0((u32)sport->port.membase) = s[i];
+
+ if (s[i] == '\n') {
+ while ((UTS((u32)sport->port.membase) & UTS_TXFULL))
+ barrier();
+ URTX0((u32)sport->port.membase) = '\r';
+ }
+ }
+
+ /*
+ * Finally, wait for transmitter to become empty
+ * and restore UCR1/2
+ */
+ while (!(USR2((u32)sport->port.membase) & USR2_TXDC));
+
+ UCR1((u32)sport->port.membase) = old_ucr1;
+ UCR2((u32)sport->port.membase) = old_ucr2;
+}
+
+/*
+ * If the port was already initialised (eg, by a boot loader),
+ * try to determine the current setup.
+ */
+static void __init
+imx_console_get_options(struct imx_port *sport, int *baud,
+ int *parity, int *bits)
+{
+ if ( UCR1((u32)sport->port.membase) | UCR1_UARTEN ) {
+ /* ok, the port was enabled */
+ unsigned int ucr2, ubir,ubmr, uartclk;
+
+ ucr2 = UCR2((u32)sport->port.membase);
+
+ *parity = 'n';
+ if (ucr2 & UCR2_PREN) {
+ if (ucr2 & UCR2_PROE)
+ *parity = 'o';
+ else
+ *parity = 'e';
+ }
+
+ if (ucr2 & UCR2_WS)
+ *bits = 8;
+ else
+ *bits = 7;
+
+ ubir = UBIR((u32)sport->port.membase) & 0xffff;
+ ubmr = UBMR((u32)sport->port.membase) & 0xffff;
+ uartclk = sport->port.uartclk;
+
+ *baud = ((uartclk/16) * (ubir + 1)) / (ubmr + 1);
+ }
+}
+
+static int __init
+imx_console_setup(struct console *co, char *options)
+{
+ struct imx_port *sport;
+ int baud = 9600;
+ int bits = 8;
+ int parity = 'n';
+ int flow = 'n';
+
+ /*
+ * Check whether an invalid uart number has been specified, and
+ * if so, search for the first available port that does have
+ * console support.
+ */
+ if (co->index == -1 || co->index >= ARRAY_SIZE(imx_ports))
+ co->index = 0;
+ sport = &imx_ports[co->index];
+
+ if (options)
+ uart_parse_options(options, &baud, &parity, &bits, &flow);
+ else
+ imx_console_get_options(sport, &baud, &parity, &bits);
+
+ return uart_set_options(&sport->port, co, baud, parity, bits, flow);
+}
+
+extern struct uart_driver imx_reg;
+static struct console imx_console = {
+ .name = "ttySMX",
+ .write = imx_console_write,
+ .device = uart_console_device,
+ .setup = imx_console_setup,
+ .flags = CON_PRINTBUFFER,
+ .index = -1,
+ .data = &imx_reg,
+};
+
+static int __init imx_rs_console_init(void)
+{
+ imx_init_ports();
+ register_console(&imx_console);
+ return 0;
+}
+console_initcall(imx_rs_console_init);
+
+#define IMX_CONSOLE &imx_console
+#else
+#define IMX_CONSOLE NULL
+#endif
+
+static struct uart_driver imx_reg = {
+ .owner = THIS_MODULE,
+ .driver_name = DRIVER_NAME,
+ .dev_name = "ttySMX",
+ .devfs_name = "ttsmx/",
+ .major = SERIAL_IMX_MAJOR,
+ .minor = MINOR_START,
+ .nr = ARRAY_SIZE(imx_ports),
+ .cons = IMX_CONSOLE,
+};
+
+static int serial_imx_suspend(struct device *_dev, u32 state, u32 level)
+{
+ struct imx_port *sport = dev_get_drvdata(_dev);
+
+ if (sport && level == SUSPEND_DISABLE)
+ uart_suspend_port(&imx_reg, &sport->port);
+
+ return 0;
+}
+
+static int serial_imx_resume(struct device *_dev, u32 level)
+{
+ struct imx_port *sport = dev_get_drvdata(_dev);
+
+ if (sport && level == RESUME_ENABLE)
+ uart_resume_port(&imx_reg, &sport->port);
+
+ return 0;
+}
+
+static int serial_imx_probe(struct device *_dev)
+{
+ struct platform_device *dev = to_platform_device(_dev);
+
+ imx_ports[dev->id].port.dev = _dev;
+ uart_add_one_port(&imx_reg, &imx_ports[dev->id].port);
+ dev_set_drvdata(_dev, &imx_ports[dev->id]);
+ return 0;
+}
+
+static int serial_imx_remove(struct device *_dev)
+{
+ struct imx_port *sport = dev_get_drvdata(_dev);
+
+ dev_set_drvdata(_dev, NULL);
+
+ if (sport)
+ uart_remove_one_port(&imx_reg, &sport->port);
+
+ return 0;
+}
+
+static struct device_driver serial_imx_driver = {
+ .name = "imx-uart",
+ .bus = &platform_bus_type,
+ .probe = serial_imx_probe,
+ .remove = serial_imx_remove,
+
+ .suspend = serial_imx_suspend,
+ .resume = serial_imx_resume,
+};
+
+static int __init imx_serial_init(void)
+{
+ int ret;
+
+ printk(KERN_INFO "Serial: IMX driver\n");
+
+ imx_init_ports();
+
+ ret = uart_register_driver(&imx_reg);
+ if (ret)
+ return ret;
+
+ ret = driver_register(&serial_imx_driver);
+ if (ret != 0)
+ uart_unregister_driver(&imx_reg);
+
+ return 0;
+}
+
+static void __exit imx_serial_exit(void)
+{
+ uart_unregister_driver(&imx_reg);
+}
+
+module_init(imx_serial_init);
+module_exit(imx_serial_exit);
+
+MODULE_AUTHOR("Sascha Hauer");
+MODULE_DESCRIPTION("IMX generic serial port driver");
+MODULE_LICENSE("GPL");