Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/drivers/tc/lk201.c b/drivers/tc/lk201.c
new file mode 100644
index 0000000..cf10d5c
--- /dev/null
+++ b/drivers/tc/lk201.c
@@ -0,0 +1,441 @@
+/*
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1999-2002 Harald Koerfgen <hkoerfg@web.de>
+ * Copyright (C) 2001, 2002, 2003, 2004 Maciej W. Rozycki
+ */
+
+#include <linux/config.h>
+
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/tty.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/kbd_ll.h>
+#include <linux/kbd_kern.h>
+#include <linux/vt_kern.h>
+
+#include <asm/keyboard.h>
+#include <asm/dec/tc.h>
+#include <asm/dec/machtype.h>
+#include <asm/dec/serial.h>
+
+#include "lk201.h"
+
+/*
+ * Only handle DECstations that have an LK201 interface.
+ * Maxine uses LK501 at the Access.Bus and various DECsystems
+ * have no keyboard interface at all.
+ */
+#define LK_IFACE (mips_machtype == MACH_DS23100 || \
+ mips_machtype == MACH_DS5000_200 || \
+ mips_machtype == MACH_DS5000_1XX || \
+ mips_machtype == MACH_DS5000_2X0)
+/*
+ * These use the Z8530 SCC. Others use the DZ11.
+ */
+#define LK_IFACE_ZS (mips_machtype == MACH_DS5000_1XX || \
+ mips_machtype == MACH_DS5000_2X0)
+
+/* Simple translation table for the SysRq keys */
+
+#ifdef CONFIG_MAGIC_SYSRQ
+/*
+ * Actually no translation at all, at least until we figure out
+ * how to define SysRq for LK201 and friends. --macro
+ */
+unsigned char lk201_sysrq_xlate[128];
+unsigned char *kbd_sysrq_xlate = lk201_sysrq_xlate;
+
+unsigned char kbd_sysrq_key = -1;
+#endif
+
+#define KEYB_LINE 3
+
+static int __init lk201_init(void *);
+static void __init lk201_info(void *);
+static void lk201_rx_char(unsigned char, unsigned char);
+
+static struct dec_serial_hook lk201_hook = {
+ .init_channel = lk201_init,
+ .init_info = lk201_info,
+ .rx_char = NULL,
+ .poll_rx_char = NULL,
+ .poll_tx_char = NULL,
+ .cflags = B4800 | CS8 | CSTOPB | CLOCAL,
+};
+
+/*
+ * This is used during keyboard initialisation
+ */
+static unsigned char lk201_reset_string[] = {
+ LK_CMD_SET_DEFAULTS,
+ LK_CMD_MODE(LK_MODE_RPT_DOWN, 1),
+ LK_CMD_MODE(LK_MODE_RPT_DOWN, 2),
+ LK_CMD_MODE(LK_MODE_RPT_DOWN, 3),
+ LK_CMD_MODE(LK_MODE_RPT_DOWN, 4),
+ LK_CMD_MODE(LK_MODE_DOWN_UP, 5),
+ LK_CMD_MODE(LK_MODE_DOWN_UP, 6),
+ LK_CMD_MODE(LK_MODE_RPT_DOWN, 7),
+ LK_CMD_MODE(LK_MODE_RPT_DOWN, 8),
+ LK_CMD_MODE(LK_MODE_RPT_DOWN, 9),
+ LK_CMD_MODE(LK_MODE_RPT_DOWN, 10),
+ LK_CMD_MODE(LK_MODE_RPT_DOWN, 11),
+ LK_CMD_MODE(LK_MODE_RPT_DOWN, 12),
+ LK_CMD_MODE(LK_MODE_DOWN, 13),
+ LK_CMD_MODE(LK_MODE_RPT_DOWN, 14),
+ LK_CMD_DIS_KEYCLK,
+ LK_CMD_ENB_BELL, LK_PARAM_VOLUME(4),
+};
+
+static void *lk201_handle;
+
+static int lk201_send(unsigned char ch)
+{
+ if (lk201_hook.poll_tx_char(lk201_handle, ch)) {
+ printk(KERN_ERR "lk201: transmit timeout\n");
+ return -EIO;
+ }
+ return 0;
+}
+
+static inline int lk201_get_id(void)
+{
+ return lk201_send(LK_CMD_REQ_ID);
+}
+
+static int lk201_reset(void)
+{
+ int i, r;
+
+ for (i = 0; i < sizeof(lk201_reset_string); i++) {
+ r = lk201_send(lk201_reset_string[i]);
+ if (r < 0)
+ return r;
+ }
+ return 0;
+}
+
+static void lk201_report(unsigned char id[6])
+{
+ char *report = "lk201: keyboard attached, ";
+
+ switch (id[2]) {
+ case LK_STAT_PWRUP_OK:
+ printk(KERN_INFO "%sself-test OK\n", report);
+ break;
+ case LK_STAT_PWRUP_KDOWN:
+ /* The keyboard will resend the power-up ID
+ after all keys are released, so we don't
+ bother handling the error specially. Still
+ there may be a short-circuit inside.
+ */
+ printk(KERN_ERR "%skey down (stuck?), code: 0x%02x\n",
+ report, id[3]);
+ break;
+ case LK_STAT_PWRUP_ERROR:
+ printk(KERN_ERR "%sself-test failure\n", report);
+ break;
+ default:
+ printk(KERN_ERR "%sunknown error: 0x%02x\n",
+ report, id[2]);
+ }
+}
+
+static void lk201_id(unsigned char id[6])
+{
+ /*
+ * Report whether there is an LK201 or an LK401
+ * The LK401 has ALT keys...
+ */
+ switch (id[4]) {
+ case 1:
+ printk(KERN_INFO "lk201: LK201 detected\n");
+ break;
+ case 2:
+ printk(KERN_INFO "lk201: LK401 detected\n");
+ break;
+ case 3:
+ printk(KERN_INFO "lk201: LK443 detected\n");
+ break;
+ case 4:
+ printk(KERN_INFO "lk201: LK421 detected\n");
+ break;
+ default:
+ printk(KERN_WARNING
+ "lk201: unknown keyboard detected, ID %d\n", id[4]);
+ printk(KERN_WARNING "lk201: ... please report to "
+ "<linux-mips@linux-mips.org>\n");
+ }
+}
+
+#define DEFAULT_KEYB_REP_DELAY (250/5) /* [5ms] */
+#define DEFAULT_KEYB_REP_RATE 30 /* [cps] */
+
+static struct kbd_repeat kbdrate = {
+ DEFAULT_KEYB_REP_DELAY,
+ DEFAULT_KEYB_REP_RATE
+};
+
+static void parse_kbd_rate(struct kbd_repeat *r)
+{
+ if (r->delay <= 0)
+ r->delay = kbdrate.delay;
+ if (r->rate <= 0)
+ r->rate = kbdrate.rate;
+
+ if (r->delay < 5)
+ r->delay = 5;
+ if (r->delay > 630)
+ r->delay = 630;
+ if (r->rate < 12)
+ r->rate = 12;
+ if (r->rate > 127)
+ r->rate = 127;
+ if (r->rate == 125)
+ r->rate = 124;
+}
+
+static int write_kbd_rate(struct kbd_repeat *rep)
+{
+ int delay, rate;
+ int i;
+
+ delay = rep->delay / 5;
+ rate = rep->rate;
+ for (i = 0; i < 4; i++) {
+ if (lk201_hook.poll_tx_char(lk201_handle,
+ LK_CMD_RPT_RATE(i)))
+ return 1;
+ if (lk201_hook.poll_tx_char(lk201_handle,
+ LK_PARAM_DELAY(delay)))
+ return 1;
+ if (lk201_hook.poll_tx_char(lk201_handle,
+ LK_PARAM_RATE(rate)))
+ return 1;
+ }
+ return 0;
+}
+
+static int lk201_kbd_rate(struct kbd_repeat *rep)
+{
+ if (rep == NULL)
+ return -EINVAL;
+
+ parse_kbd_rate(rep);
+
+ if (write_kbd_rate(rep)) {
+ memcpy(rep, &kbdrate, sizeof(struct kbd_repeat));
+ return -EIO;
+ }
+
+ memcpy(&kbdrate, rep, sizeof(struct kbd_repeat));
+
+ return 0;
+}
+
+static void lk201_kd_mksound(unsigned int hz, unsigned int ticks)
+{
+ if (!ticks)
+ return;
+
+ /*
+ * Can't set frequency and we "approximate"
+ * duration by volume. ;-)
+ */
+ ticks /= HZ / 32;
+ if (ticks > 7)
+ ticks = 7;
+ ticks = 7 - ticks;
+
+ if (lk201_hook.poll_tx_char(lk201_handle, LK_CMD_ENB_BELL))
+ return;
+ if (lk201_hook.poll_tx_char(lk201_handle, LK_PARAM_VOLUME(ticks)))
+ return;
+ if (lk201_hook.poll_tx_char(lk201_handle, LK_CMD_BELL))
+ return;
+}
+
+void kbd_leds(unsigned char leds)
+{
+ unsigned char l = 0;
+
+ if (!lk201_handle) /* FIXME */
+ return;
+
+ /* FIXME -- Only Hold and Lock LEDs for now. --macro */
+ if (leds & LED_SCR)
+ l |= LK_LED_HOLD;
+ if (leds & LED_CAP)
+ l |= LK_LED_LOCK;
+
+ if (lk201_hook.poll_tx_char(lk201_handle, LK_CMD_LEDS_ON))
+ return;
+ if (lk201_hook.poll_tx_char(lk201_handle, LK_PARAM_LED_MASK(l)))
+ return;
+ if (lk201_hook.poll_tx_char(lk201_handle, LK_CMD_LEDS_OFF))
+ return;
+ if (lk201_hook.poll_tx_char(lk201_handle, LK_PARAM_LED_MASK(~l)))
+ return;
+}
+
+int kbd_setkeycode(unsigned int scancode, unsigned int keycode)
+{
+ return -EINVAL;
+}
+
+int kbd_getkeycode(unsigned int scancode)
+{
+ return -EINVAL;
+}
+
+int kbd_translate(unsigned char scancode, unsigned char *keycode,
+ char raw_mode)
+{
+ *keycode = scancode;
+ return 1;
+}
+
+char kbd_unexpected_up(unsigned char keycode)
+{
+ return 0x80;
+}
+
+static void lk201_rx_char(unsigned char ch, unsigned char fl)
+{
+ static unsigned char id[6];
+ static int id_i;
+
+ static int shift_state = 0;
+ static int prev_scancode;
+ unsigned char c = scancodeRemap[ch];
+
+ if (fl != TTY_NORMAL && fl != TTY_OVERRUN) {
+ printk(KERN_ERR "lk201: keyboard receive error: 0x%02x\n", fl);
+ return;
+ }
+
+ /* Assume this is a power-up ID. */
+ if (ch == LK_STAT_PWRUP_ID && !id_i) {
+ id[id_i++] = ch;
+ return;
+ }
+
+ /* Handle the power-up sequence. */
+ if (id_i) {
+ id[id_i++] = ch;
+ if (id_i == 4) {
+ /* OK, the power-up concluded. */
+ lk201_report(id);
+ if (id[2] == LK_STAT_PWRUP_OK)
+ lk201_get_id();
+ else {
+ id_i = 0;
+ printk(KERN_ERR "lk201: keyboard power-up "
+ "error, skipping initialization\n");
+ }
+ } else if (id_i == 6) {
+ /* We got the ID; report it and start operation. */
+ id_i = 0;
+ lk201_id(id);
+ lk201_reset();
+ }
+ return;
+ }
+
+ /* Everything else is a scancode/status response. */
+ id_i = 0;
+ switch (ch) {
+ case LK_STAT_RESUME_ERR:
+ case LK_STAT_ERROR:
+ case LK_STAT_INHIBIT_ACK:
+ case LK_STAT_TEST_ACK:
+ case LK_STAT_MODE_KEYDOWN:
+ case LK_STAT_MODE_ACK:
+ break;
+ case LK_KEY_LOCK:
+ shift_state ^= LK_LOCK;
+ handle_scancode(c, (shift_state & LK_LOCK) ? 1 : 0);
+ break;
+ case LK_KEY_SHIFT:
+ shift_state ^= LK_SHIFT;
+ handle_scancode(c, (shift_state & LK_SHIFT) ? 1 : 0);
+ break;
+ case LK_KEY_CTRL:
+ shift_state ^= LK_CTRL;
+ handle_scancode(c, (shift_state & LK_CTRL) ? 1 : 0);
+ break;
+ case LK_KEY_COMP:
+ shift_state ^= LK_COMP;
+ handle_scancode(c, (shift_state & LK_COMP) ? 1 : 0);
+ break;
+ case LK_KEY_RELEASE:
+ if (shift_state & LK_SHIFT)
+ handle_scancode(scancodeRemap[LK_KEY_SHIFT], 0);
+ if (shift_state & LK_CTRL)
+ handle_scancode(scancodeRemap[LK_KEY_CTRL], 0);
+ if (shift_state & LK_COMP)
+ handle_scancode(scancodeRemap[LK_KEY_COMP], 0);
+ if (shift_state & LK_LOCK)
+ handle_scancode(scancodeRemap[LK_KEY_LOCK], 0);
+ shift_state = 0;
+ break;
+ case LK_KEY_REPEAT:
+ handle_scancode(prev_scancode, 1);
+ break;
+ default:
+ prev_scancode = c;
+ handle_scancode(c, 1);
+ break;
+ }
+ tasklet_schedule(&keyboard_tasklet);
+}
+
+static void __init lk201_info(void *handle)
+{
+}
+
+static int __init lk201_init(void *handle)
+{
+ /* First install handlers. */
+ lk201_handle = handle;
+ kbd_rate = lk201_kbd_rate;
+ kd_mksound = lk201_kd_mksound;
+
+ lk201_hook.rx_char = lk201_rx_char;
+
+ /* Then just issue a reset -- the handlers will do the rest. */
+ lk201_send(LK_CMD_POWER_UP);
+
+ return 0;
+}
+
+void __init kbd_init_hw(void)
+{
+ /* Maxine uses LK501 at the Access.Bus. */
+ if (!LK_IFACE)
+ return;
+
+ printk(KERN_INFO "lk201: DECstation LK keyboard driver v0.05.\n");
+
+ if (LK_IFACE_ZS) {
+ /*
+ * kbd_init_hw() is being called before
+ * rs_init() so just register the kbd hook
+ * and let zs_init do the rest :-)
+ */
+ if (!register_dec_serial_hook(KEYB_LINE, &lk201_hook))
+ unregister_dec_serial_hook(KEYB_LINE);
+ } else {
+ /*
+ * TODO: modify dz.c to allow similar hooks
+ * for LK201 handling on DS2100, DS3100, and DS5000/200
+ */
+ printk(KERN_ERR "lk201: support for DZ11 not yet ready.\n");
+ }
+}