Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/drivers/usb/host/ohci-au1xxx.c b/drivers/usb/host/ohci-au1xxx.c
new file mode 100644
index 0000000..3981bf1
--- /dev/null
+++ b/drivers/usb/host/ohci-au1xxx.c
@@ -0,0 +1,284 @@
+/*
+ * OHCI HCD (Host Controller Driver) for USB.
+ *
+ * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
+ * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
+ * (C) Copyright 2002 Hewlett-Packard Company
+ *
+ * Bus Glue for AMD Alchemy Au1xxx
+ *
+ * Written by Christopher Hoover <ch@hpl.hp.com>
+ * Based on fragments of previous driver by Rusell King et al.
+ *
+ * Modified for LH7A404 from ohci-sa1111.c
+ * by Durgesh Pattamatta <pattamattad@sharpsec.com>
+ * Modified for AMD Alchemy Au1xxx
+ * by Matt Porter <mporter@kernel.crashing.org>
+ *
+ * This file is licenced under the GPL.
+ */
+
+#include <asm/mach-au1x00/au1000.h>
+
+#define USBH_ENABLE_BE (1<<0)
+#define USBH_ENABLE_C (1<<1)
+#define USBH_ENABLE_E (1<<2)
+#define USBH_ENABLE_CE (1<<3)
+#define USBH_ENABLE_RD (1<<4)
+
+#ifdef __LITTLE_ENDIAN
+#define USBH_ENABLE_INIT (USBH_ENABLE_CE | USBH_ENABLE_E | USBH_ENABLE_C)
+#elif __BIG_ENDIAN
+#define USBH_ENABLE_INIT (USBH_ENABLE_CE | USBH_ENABLE_E | USBH_ENABLE_C | USBH_ENABLE_BE)
+#else
+#error not byte order defined
+#endif
+
+extern int usb_disabled(void);
+
+/*-------------------------------------------------------------------------*/
+
+static void au1xxx_start_hc(struct platform_device *dev)
+{
+ printk(KERN_DEBUG __FILE__
+ ": starting Au1xxx OHCI USB Controller\n");
+
+ /* enable host controller */
+ au_writel(USBH_ENABLE_CE, USB_HOST_CONFIG);
+ udelay(1000);
+ au_writel(USBH_ENABLE_INIT, USB_HOST_CONFIG);
+ udelay(1000);
+
+ /* wait for reset complete (read register twice; see au1500 errata) */
+ while (au_readl(USB_HOST_CONFIG),
+ !(au_readl(USB_HOST_CONFIG) & USBH_ENABLE_RD))
+ udelay(1000);
+
+ printk(KERN_DEBUG __FILE__
+ ": Clock to USB host has been enabled \n");
+}
+
+static void au1xxx_stop_hc(struct platform_device *dev)
+{
+ printk(KERN_DEBUG __FILE__
+ ": stopping Au1xxx OHCI USB Controller\n");
+
+ /* Disable clock */
+ au_writel(readl((void *)USB_HOST_CONFIG) & ~USBH_ENABLE_CE, USB_HOST_CONFIG);
+}
+
+
+/*-------------------------------------------------------------------------*/
+
+/* configure so an HC device and id are always provided */
+/* always called with process context; sleeping is OK */
+
+
+/**
+ * usb_hcd_au1xxx_probe - initialize Au1xxx-based HCDs
+ * Context: !in_interrupt()
+ *
+ * Allocates basic resources for this USB host controller, and
+ * then invokes the start() method for the HCD associated with it
+ * through the hotplug entry's driver_data.
+ *
+ */
+int usb_hcd_au1xxx_probe (const struct hc_driver *driver,
+ struct platform_device *dev)
+{
+ int retval;
+ struct usb_hcd *hcd;
+
+ if(dev->resource[1].flags != IORESOURCE_IRQ) {
+ pr_debug ("resource[1] is not IORESOURCE_IRQ");
+ return -ENOMEM;
+ }
+
+ hcd = usb_create_hcd(driver, &dev->dev, "au1xxx");
+ if (!hcd)
+ return -ENOMEM;
+ hcd->rsrc_start = dev->resource[0].start;
+ hcd->rsrc_len = dev->resource[0].end - dev->resource[0].start + 1;
+
+ if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
+ pr_debug("request_mem_region failed");
+ retval = -EBUSY;
+ goto err1;
+ }
+
+ hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
+ if (!hcd->regs) {
+ pr_debug("ioremap failed");
+ retval = -ENOMEM;
+ goto err2;
+ }
+
+ au1xxx_start_hc(dev);
+ ohci_hcd_init(hcd_to_ohci(hcd));
+
+ retval = usb_add_hcd(hcd, dev->resource[1].start, SA_INTERRUPT);
+ if (retval == 0)
+ return retval;
+
+ au1xxx_stop_hc(dev);
+ iounmap(hcd->regs);
+ err2:
+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+ err1:
+ usb_put_hcd(hcd);
+ return retval;
+}
+
+
+/* may be called without controller electrically present */
+/* may be called with controller, bus, and devices active */
+
+/**
+ * usb_hcd_au1xxx_remove - shutdown processing for Au1xxx-based HCDs
+ * @dev: USB Host Controller being removed
+ * Context: !in_interrupt()
+ *
+ * Reverses the effect of usb_hcd_au1xxx_probe(), first invoking
+ * the HCD's stop() method. It is always called from a thread
+ * context, normally "rmmod", "apmd", or something similar.
+ *
+ */
+void usb_hcd_au1xxx_remove (struct usb_hcd *hcd, struct platform_device *dev)
+{
+ usb_remove_hcd(hcd);
+ au1xxx_stop_hc(dev);
+ iounmap(hcd->regs);
+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+ usb_put_hcd(hcd);
+}
+
+/*-------------------------------------------------------------------------*/
+
+static int __devinit
+ohci_au1xxx_start (struct usb_hcd *hcd)
+{
+ struct ohci_hcd *ohci = hcd_to_ohci (hcd);
+ int ret;
+
+ ohci_dbg (ohci, "ohci_au1xxx_start, ohci:%p", ohci);
+
+ if ((ret = ohci_init (ohci)) < 0)
+ return ret;
+
+ if ((ret = ohci_run (ohci)) < 0) {
+ err ("can't start %s", hcd->self.bus_name);
+ ohci_stop (hcd);
+ return ret;
+ }
+
+ return 0;
+}
+
+/*-------------------------------------------------------------------------*/
+
+static const struct hc_driver ohci_au1xxx_hc_driver = {
+ .description = hcd_name,
+ .product_desc = "Au1xxx OHCI",
+ .hcd_priv_size = sizeof(struct ohci_hcd),
+
+ /*
+ * generic hardware linkage
+ */
+ .irq = ohci_irq,
+ .flags = HCD_USB11 | HCD_MEMORY,
+
+ /*
+ * basic lifecycle operations
+ */
+ .start = ohci_au1xxx_start,
+#ifdef CONFIG_PM
+ /* suspend: ohci_au1xxx_suspend, -- tbd */
+ /* resume: ohci_au1xxx_resume, -- tbd */
+#endif /*CONFIG_PM*/
+ .stop = ohci_stop,
+
+ /*
+ * managing i/o requests and associated device resources
+ */
+ .urb_enqueue = ohci_urb_enqueue,
+ .urb_dequeue = ohci_urb_dequeue,
+ .endpoint_disable = ohci_endpoint_disable,
+
+ /*
+ * scheduling support
+ */
+ .get_frame_number = ohci_get_frame,
+
+ /*
+ * root hub support
+ */
+ .hub_status_data = ohci_hub_status_data,
+ .hub_control = ohci_hub_control,
+};
+
+/*-------------------------------------------------------------------------*/
+
+static int ohci_hcd_au1xxx_drv_probe(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ int ret;
+
+ pr_debug ("In ohci_hcd_au1xxx_drv_probe");
+
+ if (usb_disabled())
+ return -ENODEV;
+
+ ret = usb_hcd_au1xxx_probe(&ohci_au1xxx_hc_driver, pdev);
+ return ret;
+}
+
+static int ohci_hcd_au1xxx_drv_remove(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct usb_hcd *hcd = dev_get_drvdata(dev);
+
+ usb_hcd_au1xxx_remove(hcd, pdev);
+ return 0;
+}
+ /*TBD*/
+/*static int ohci_hcd_au1xxx_drv_suspend(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct usb_hcd *hcd = dev_get_drvdata(dev);
+
+ return 0;
+}
+static int ohci_hcd_au1xxx_drv_resume(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct usb_hcd *hcd = dev_get_drvdata(dev);
+
+ return 0;
+}
+*/
+
+static struct device_driver ohci_hcd_au1xxx_driver = {
+ .name = "au1xxx-ohci",
+ .bus = &platform_bus_type,
+ .probe = ohci_hcd_au1xxx_drv_probe,
+ .remove = ohci_hcd_au1xxx_drv_remove,
+ /*.suspend = ohci_hcd_au1xxx_drv_suspend, */
+ /*.resume = ohci_hcd_au1xxx_drv_resume, */
+};
+
+static int __init ohci_hcd_au1xxx_init (void)
+{
+ pr_debug (DRIVER_INFO " (Au1xxx)");
+ pr_debug ("block sizes: ed %d td %d\n",
+ sizeof (struct ed), sizeof (struct td));
+
+ return driver_register(&ohci_hcd_au1xxx_driver);
+}
+
+static void __exit ohci_hcd_au1xxx_cleanup (void)
+{
+ driver_unregister(&ohci_hcd_au1xxx_driver);
+}
+
+module_init (ohci_hcd_au1xxx_init);
+module_exit (ohci_hcd_au1xxx_cleanup);