Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/drivers/video/S3triofb.c b/drivers/video/S3triofb.c
new file mode 100644
index 0000000..455fda9
--- /dev/null
+++ b/drivers/video/S3triofb.c
@@ -0,0 +1,789 @@
+/*
+ * linux/drivers/video/S3Triofb.c -- Open Firmware based frame buffer device
+ *
+ * Copyright (C) 1997 Peter De Schrijver
+ *
+ * This driver is partly based on the PowerMac console driver:
+ *
+ * Copyright (C) 1996 Paul Mackerras
+ *
+ * and on the Open Firmware based frame buffer device:
+ *
+ * Copyright (C) 1997 Geert Uytterhoeven
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
+ */
+
+/*
+ Bugs : + OF dependencies should be removed.
+ + This driver should be merged with the CyberVision driver. The
+ CyberVision is a Zorro III implementation of the S3Trio64 chip.
+
+*/
+
+#include <linux/config.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/tty.h>
+#include <linux/slab.h>
+#include <linux/vmalloc.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/selection.h>
+#include <asm/io.h>
+#include <asm/prom.h>
+#include <asm/pci-bridge.h>
+#include <linux/pci.h>
+
+#include <video/fbcon.h>
+#include <video/fbcon-cfb8.h>
+#include <video/s3blit.h>
+
+
+#define mem_in8(addr) in_8((void *)(addr))
+#define mem_in16(addr) in_le16((void *)(addr))
+#define mem_in32(addr) in_le32((void *)(addr))
+
+#define mem_out8(val, addr) out_8((void *)(addr), val)
+#define mem_out16(val, addr) out_le16((void *)(addr), val)
+#define mem_out32(val, addr) out_le32((void *)(addr), val)
+
+#define IO_OUT16VAL(v, r) (((v) << 8) | (r))
+
+static struct display disp;
+static struct fb_info fb_info;
+static struct { u_char red, green, blue, pad; } palette[256];
+static char s3trio_name[16] = "S3Trio ";
+static char *s3trio_base;
+
+static struct fb_fix_screeninfo fb_fix;
+static struct fb_var_screeninfo fb_var = { 0, };
+
+
+ /*
+ * Interface used by the world
+ */
+
+static void __init s3triofb_of_init(struct device_node *dp);
+static int s3trio_get_fix(struct fb_fix_screeninfo *fix, int con,
+ struct fb_info *info);
+static int s3trio_get_var(struct fb_var_screeninfo *var, int con,
+ struct fb_info *info);
+static int s3trio_set_var(struct fb_var_screeninfo *var, int con,
+ struct fb_info *info);
+static int s3trio_get_cmap(struct fb_cmap *cmap, int kspc, int con,
+ struct fb_info *info);
+static int s3trio_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
+ u_int transp, struct fb_info *info);
+static int s3trio_pan_display(struct fb_var_screeninfo *var, int con,
+ struct fb_info *info);
+static void s3triofb_blank(int blank, struct fb_info *info);
+
+ /*
+ * Interface to the low level console driver
+ */
+
+int s3triofb_init(void);
+static int s3triofbcon_switch(int con, struct fb_info *info);
+static int s3triofbcon_updatevar(int con, struct fb_info *info);
+
+ /*
+ * Text console acceleration
+ */
+
+#ifdef FBCON_HAS_CFB8
+static struct display_switch fbcon_trio8;
+#endif
+
+ /*
+ * Accelerated Functions used by the low level console driver
+ */
+
+static void Trio_WaitQueue(u_short fifo);
+static void Trio_WaitBlit(void);
+static void Trio_BitBLT(u_short curx, u_short cury, u_short destx,
+ u_short desty, u_short width, u_short height,
+ u_short mode);
+static void Trio_RectFill(u_short x, u_short y, u_short width, u_short height,
+ u_short mode, u_short color);
+static void Trio_MoveCursor(u_short x, u_short y);
+
+
+ /*
+ * Internal routines
+ */
+
+static int s3trio_getcolreg(u_int regno, u_int *red, u_int *green, u_int *blue,
+ u_int *transp, struct fb_info *info);
+
+static struct fb_ops s3trio_ops = {
+ .owner = THIS_MODULE,
+ .fb_get_fix = s3trio_get_fix,
+ .fb_get_var = s3trio_get_var,
+ .fb_set_var = s3trio_set_var,
+ .fb_get_cmap = s3trio_get_cmap,
+ .fb_set_cmap = gen_set_cmap,
+ .fb_setcolreg = s3trio_setcolreg,
+ .fb_pan_display =s3trio_pan_display,
+ .fb_blank = s3triofb_blank,
+};
+
+ /*
+ * Get the Fixed Part of the Display
+ */
+
+static int s3trio_get_fix(struct fb_fix_screeninfo *fix, int con,
+ struct fb_info *info)
+{
+ memcpy(fix, &fb_fix, sizeof(fb_fix));
+ return 0;
+}
+
+
+ /*
+ * Get the User Defined Part of the Display
+ */
+
+static int s3trio_get_var(struct fb_var_screeninfo *var, int con,
+ struct fb_info *info)
+{
+ memcpy(var, &fb_var, sizeof(fb_var));
+ return 0;
+}
+
+
+ /*
+ * Set the User Defined Part of the Display
+ */
+
+static int s3trio_set_var(struct fb_var_screeninfo *var, int con,
+ struct fb_info *info)
+{
+ if (var->xres > fb_var.xres || var->yres > fb_var.yres ||
+ var->bits_per_pixel > fb_var.bits_per_pixel )
+ /* || var->nonstd || var->vmode != FB_VMODE_NONINTERLACED) */
+ return -EINVAL;
+ if (var->xres_virtual > fb_var.xres_virtual) {
+ outw(IO_OUT16VAL((var->xres_virtual /8) & 0xff, 0x13), 0x3d4);
+ outw(IO_OUT16VAL(((var->xres_virtual /8 ) & 0x300) >> 3, 0x51), 0x3d4);
+ fb_var.xres_virtual = var->xres_virtual;
+ fb_fix.line_length = var->xres_virtual;
+ }
+ fb_var.yres_virtual = var->yres_virtual;
+ memcpy(var, &fb_var, sizeof(fb_var));
+ return 0;
+}
+
+
+ /*
+ * Pan or Wrap the Display
+ *
+ * This call looks only at xoffset, yoffset and the FB_VMODE_YWRAP flag
+ */
+
+static int s3trio_pan_display(struct fb_var_screeninfo *var, int con,
+ struct fb_info *info)
+{
+ unsigned int base;
+
+ if (var->xoffset > (var->xres_virtual - var->xres))
+ return -EINVAL;
+ if (var->yoffset > (var->yres_virtual - var->yres))
+ return -EINVAL;
+
+ fb_var.xoffset = var->xoffset;
+ fb_var.yoffset = var->yoffset;
+
+ base = var->yoffset * fb_fix.line_length + var->xoffset;
+
+ outw(IO_OUT16VAL((base >> 8) & 0xff, 0x0c),0x03D4);
+ outw(IO_OUT16VAL(base & 0xff, 0x0d),0x03D4);
+ outw(IO_OUT16VAL((base >> 16) & 0xf, 0x69),0x03D4);
+ return 0;
+}
+
+
+ /*
+ * Get the Colormap
+ */
+
+static int s3trio_get_cmap(struct fb_cmap *cmap, int kspc, int con,
+ struct fb_info *info)
+{
+ if (con == info->currcon) /* current console? */
+ return fb_get_cmap(cmap, kspc, s3trio_getcolreg, info);
+ else if (fb_display[con].cmap.len) /* non default colormap? */
+ fb_copy_cmap(&fb_display[con].cmap, cmap, kspc ? 0 : 2);
+ else
+ fb_copy_cmap(fb_default_cmap(1 << fb_display[con].var.bits_per_pixel),
+ cmap, kspc ? 0 : 2);
+ return 0;
+}
+
+int __init s3triofb_init(void)
+{
+ struct device_node *dp;
+
+ dp = find_devices("S3Trio");
+ if (dp != 0)
+ s3triofb_of_init(dp);
+ return 0;
+}
+
+void __init s3trio_resetaccel(void){
+
+
+#define EC01_ENH_ENB 0x0005
+#define EC01_LAW_ENB 0x0010
+#define EC01_MMIO_ENB 0x0020
+
+#define EC00_RESET 0x8000
+#define EC00_ENABLE 0x4000
+#define MF_MULT_MISC 0xE000
+#define SRC_FOREGROUND 0x0020
+#define SRC_BACKGROUND 0x0000
+#define MIX_SRC 0x0007
+#define MF_T_CLIP 0x1000
+#define MF_L_CLIP 0x2000
+#define MF_B_CLIP 0x3000
+#define MF_R_CLIP 0x4000
+#define MF_PIX_CONTROL 0xA000
+#define MFA_SRC_FOREGR_MIX 0x0000
+#define MF_PIX_CONTROL 0xA000
+
+ outw(EC00_RESET, 0x42e8);
+ inw( 0x42e8);
+ outw(EC00_ENABLE, 0x42e8);
+ inw( 0x42e8);
+ outw(EC01_ENH_ENB | EC01_LAW_ENB,
+ 0x4ae8);
+ outw(MF_MULT_MISC, 0xbee8); /* 16 bit I/O registers */
+
+ /* Now set some basic accelerator registers */
+ Trio_WaitQueue(0x0400);
+ outw(SRC_FOREGROUND | MIX_SRC, 0xbae8);
+ outw(SRC_BACKGROUND | MIX_SRC, 0xb6e8);/* direct color*/
+ outw(MF_T_CLIP | 0, 0xbee8 ); /* clip virtual area */
+ outw(MF_L_CLIP | 0, 0xbee8 );
+ outw(MF_R_CLIP | (640 - 1), 0xbee8);
+ outw(MF_B_CLIP | (480 - 1), 0xbee8);
+ Trio_WaitQueue(0x0400);
+ outw(0xffff, 0xaae8); /* Enable all planes */
+ outw(0xffff, 0xaae8); /* Enable all planes */
+ outw( MF_PIX_CONTROL | MFA_SRC_FOREGR_MIX, 0xbee8);
+}
+
+int __init s3trio_init(struct device_node *dp){
+
+ u_char bus, dev;
+ unsigned int t32;
+ unsigned short cmd;
+
+ pci_device_loc(dp,&bus,&dev);
+ pcibios_read_config_dword(bus, dev, PCI_VENDOR_ID, &t32);
+ if(t32 == (PCI_DEVICE_ID_S3_TRIO << 16) + PCI_VENDOR_ID_S3) {
+ pcibios_read_config_dword(bus, dev, PCI_BASE_ADDRESS_0, &t32);
+ pcibios_read_config_dword(bus, dev, PCI_BASE_ADDRESS_1, &t32);
+ pcibios_read_config_word(bus, dev, PCI_COMMAND,&cmd);
+
+ pcibios_write_config_word(bus, dev, PCI_COMMAND, PCI_COMMAND_IO | PCI_COMMAND_MEMORY);
+
+ pcibios_write_config_dword(bus, dev, PCI_BASE_ADDRESS_0,0xffffffff);
+ pcibios_read_config_dword(bus, dev, PCI_BASE_ADDRESS_0, &t32);
+
+/* This is a gross hack as OF only maps enough memory for the framebuffer and
+ we want to use MMIO too. We should find out which chunk of address space
+ we can use here */
+ pcibios_write_config_dword(bus,dev,PCI_BASE_ADDRESS_0,0xc6000000);
+
+ /* unlock s3 */
+
+ outb(0x01, 0x3C3);
+
+ outb(inb(0x03CC) | 1, 0x3c2);
+
+ outw(IO_OUT16VAL(0x48, 0x38),0x03D4);
+ outw(IO_OUT16VAL(0xA0, 0x39),0x03D4);
+ outb(0x33,0x3d4);
+ outw(IO_OUT16VAL((inb(0x3d5) & ~(0x2 | 0x10 | 0x40)) |
+ 0x20, 0x33), 0x3d4);
+
+ outw(IO_OUT16VAL(0x6, 0x8), 0x3c4);
+
+ /* switch to MMIO only mode */
+
+ outb(0x58, 0x3d4);
+ outw(IO_OUT16VAL(inb(0x3d5) | 3 | 0x10, 0x58), 0x3d4);
+ outw(IO_OUT16VAL(8, 0x53), 0x3d4);
+
+ /* switch off I/O accesses */
+
+#if 0
+ pcibios_write_config_word(bus, dev, PCI_COMMAND,
+ PCI_COMMAND_IO | PCI_COMMAND_MEMORY);
+#endif
+ return 1;
+ }
+
+ return 0;
+}
+
+
+ /*
+ * Initialisation
+ * We heavily rely on OF for the moment. This needs fixing.
+ */
+
+static void __init s3triofb_of_init(struct device_node *dp)
+{
+ int i, *pp, len;
+ unsigned long address, size;
+ u_long *CursorBase;
+
+ strncat(s3trio_name, dp->name, sizeof(s3trio_name));
+ s3trio_name[sizeof(s3trio_name)-1] = '\0';
+ strcpy(fb_fix.id, s3trio_name);
+
+ if((pp = (int *)get_property(dp, "vendor-id", &len)) != NULL
+ && *pp!=PCI_VENDOR_ID_S3) {
+ printk("%s: can't find S3 Trio board\n", dp->full_name);
+ return;
+ }
+
+ if((pp = (int *)get_property(dp, "device-id", &len)) != NULL
+ && *pp!=PCI_DEVICE_ID_S3_TRIO) {
+ printk("%s: can't find S3 Trio board\n", dp->full_name);
+ return;
+ }
+
+ if ((pp = (int *)get_property(dp, "depth", &len)) != NULL
+ && len == sizeof(int) && *pp != 8) {
+ printk("%s: can't use depth = %d\n", dp->full_name, *pp);
+ return;
+ }
+ if ((pp = (int *)get_property(dp, "width", &len)) != NULL
+ && len == sizeof(int))
+ fb_var.xres = fb_var.xres_virtual = *pp;
+ if ((pp = (int *)get_property(dp, "height", &len)) != NULL
+ && len == sizeof(int))
+ fb_var.yres = fb_var.yres_virtual = *pp;
+ if ((pp = (int *)get_property(dp, "linebytes", &len)) != NULL
+ && len == sizeof(int))
+ fb_fix.line_length = *pp;
+ else
+ fb_fix.line_length = fb_var.xres_virtual;
+ fb_fix.smem_len = fb_fix.line_length*fb_var.yres;
+
+ address = 0xc6000000;
+ size = 64*1024*1024;
+ if (!request_mem_region(address, size, "S3triofb"))
+ return;
+
+ s3trio_init(dp);
+ s3trio_base = ioremap(address, size);
+ fb_fix.smem_start = address;
+ fb_fix.type = FB_TYPE_PACKED_PIXELS;
+ fb_fix.type_aux = 0;
+ fb_fix.accel = FB_ACCEL_S3_TRIO64;
+ fb_fix.mmio_start = address+0x1000000;
+ fb_fix.mmio_len = 0x1000000;
+
+ fb_fix.xpanstep = 1;
+ fb_fix.ypanstep = 1;
+
+ s3trio_resetaccel();
+
+ mem_out8(0x30, s3trio_base+0x1008000 + 0x03D4);
+ mem_out8(0x2d, s3trio_base+0x1008000 + 0x03D4);
+ mem_out8(0x2e, s3trio_base+0x1008000 + 0x03D4);
+
+ mem_out8(0x50, s3trio_base+0x1008000 + 0x03D4);
+
+ /* disable HW cursor */
+
+ mem_out8(0x39, s3trio_base+0x1008000 + 0x03D4);
+ mem_out8(0xa0, s3trio_base+0x1008000 + 0x03D5);
+
+ mem_out8(0x45, s3trio_base+0x1008000 + 0x03D4);
+ mem_out8(0, s3trio_base+0x1008000 + 0x03D5);
+
+ mem_out8(0x4e, s3trio_base+0x1008000 + 0x03D4);
+ mem_out8(0, s3trio_base+0x1008000 + 0x03D5);
+
+ mem_out8(0x4f, s3trio_base+0x1008000 + 0x03D4);
+ mem_out8(0, s3trio_base+0x1008000 + 0x03D5);
+
+ /* init HW cursor */
+
+ CursorBase = (u_long *)(s3trio_base + 2*1024*1024 - 0x400);
+ for (i = 0; i < 8; i++) {
+ *(CursorBase +(i*4)) = 0xffffff00;
+ *(CursorBase+1+(i*4)) = 0xffff0000;
+ *(CursorBase+2+(i*4)) = 0xffff0000;
+ *(CursorBase+3+(i*4)) = 0xffff0000;
+ }
+ for (i = 8; i < 64; i++) {
+ *(CursorBase +(i*4)) = 0xffff0000;
+ *(CursorBase+1+(i*4)) = 0xffff0000;
+ *(CursorBase+2+(i*4)) = 0xffff0000;
+ *(CursorBase+3+(i*4)) = 0xffff0000;
+ }
+
+
+ mem_out8(0x4c, s3trio_base+0x1008000 + 0x03D4);
+ mem_out8(((2*1024 - 1)&0xf00)>>8, s3trio_base+0x1008000 + 0x03D5);
+
+ mem_out8(0x4d, s3trio_base+0x1008000 + 0x03D4);
+ mem_out8((2*1024 - 1) & 0xff, s3trio_base+0x1008000 + 0x03D5);
+
+ mem_out8(0x45, s3trio_base+0x1008000 + 0x03D4);
+ mem_in8(s3trio_base+0x1008000 + 0x03D4);
+
+ mem_out8(0x4a, s3trio_base+0x1008000 + 0x03D4);
+ mem_out8(0x80, s3trio_base+0x1008000 + 0x03D5);
+ mem_out8(0x80, s3trio_base+0x1008000 + 0x03D5);
+ mem_out8(0x80, s3trio_base+0x1008000 + 0x03D5);
+
+ mem_out8(0x4b, s3trio_base+0x1008000 + 0x03D4);
+ mem_out8(0x00, s3trio_base+0x1008000 + 0x03D5);
+ mem_out8(0x00, s3trio_base+0x1008000 + 0x03D5);
+ mem_out8(0x00, s3trio_base+0x1008000 + 0x03D5);
+
+ mem_out8(0x45, s3trio_base+0x1008000 + 0x03D4);
+ mem_out8(0, s3trio_base+0x1008000 + 0x03D5);
+
+ /* setup default color table */
+
+ for(i = 0; i < 16; i++) {
+ int j = color_table[i];
+ palette[i].red=default_red[j];
+ palette[i].green=default_grn[j];
+ palette[i].blue=default_blu[j];
+ }
+
+ s3trio_setcolreg(255, 56, 100, 160, 0, NULL /* not used */);
+ s3trio_setcolreg(254, 0, 0, 0, 0, NULL /* not used */);
+ memset((char *)s3trio_base, 0, 640*480);
+
+#if 0
+ Trio_RectFill(0, 0, 90, 90, 7, 1);
+#endif
+
+ fb_fix.visual = FB_VISUAL_PSEUDOCOLOR ;
+ fb_var.xoffset = fb_var.yoffset = 0;
+ fb_var.bits_per_pixel = 8;
+ fb_var.grayscale = 0;
+ fb_var.red.offset = fb_var.green.offset = fb_var.blue.offset = 0;
+ fb_var.red.length = fb_var.green.length = fb_var.blue.length = 8;
+ fb_var.red.msb_right = fb_var.green.msb_right = fb_var.blue.msb_right = 0;
+ fb_var.transp.offset = fb_var.transp.length = fb_var.transp.msb_right = 0;
+ fb_var.nonstd = 0;
+ fb_var.activate = 0;
+ fb_var.height = fb_var.width = -1;
+ fb_var.accel_flags = FB_ACCELF_TEXT;
+#warning FIXME: always obey fb_var.accel_flags
+ fb_var.pixclock = 1;
+ fb_var.left_margin = fb_var.right_margin = 0;
+ fb_var.upper_margin = fb_var.lower_margin = 0;
+ fb_var.hsync_len = fb_var.vsync_len = 0;
+ fb_var.sync = 0;
+ fb_var.vmode = FB_VMODE_NONINTERLACED;
+
+ disp.var = fb_var;
+ disp.cmap.start = 0;
+ disp.cmap.len = 0;
+ disp.cmap.red = disp.cmap.green = disp.cmap.blue = disp.cmap.transp = NULL;
+ disp.visual = fb_fix.visual;
+ disp.type = fb_fix.type;
+ disp.type_aux = fb_fix.type_aux;
+ disp.ypanstep = 0;
+ disp.ywrapstep = 0;
+ disp.line_length = fb_fix.line_length;
+ disp.can_soft_blank = 1;
+ disp.inverse = 0;
+#ifdef FBCON_HAS_CFB8
+ if (fb_var.accel_flags & FB_ACCELF_TEXT)
+ disp.dispsw = &fbcon_trio8;
+ else
+ disp.dispsw = &fbcon_cfb8;
+#else
+ disp.dispsw = &fbcon_dummy;
+#endif
+ disp.scrollmode = fb_var.accel_flags & FB_ACCELF_TEXT ? 0 : SCROLL_YREDRAW;
+
+ strcpy(fb_info.modename, "Trio64 ");
+ strncat(fb_info.modename, dp->full_name, sizeof(fb_info.modename));
+ fb_info.currcon = -1;
+ fb_info.fbops = &s3trio_ops;
+ fb_info.screen_base = s3trio_base;
+#if 0
+ fb_info.fbvar_num = 1;
+ fb_info.fbvar = &fb_var;
+#endif
+ fb_info.disp = &disp;
+ fb_info.fontname[0] = '\0';
+ fb_info.changevar = NULL;
+ fb_info.switch_con = &s3triofbcon_switch;
+ fb_info.updatevar = &s3triofbcon_updatevar;
+#if 0
+ fb_info.setcmap = &s3triofbcon_setcmap;
+#endif
+
+ fb_info.flags = FBINFO_FLAG_DEFAULT;
+ if (register_framebuffer(&fb_info) < 0)
+ return;
+
+ printk("fb%d: S3 Trio frame buffer device on %s\n",
+ fb_info.node, dp->full_name);
+}
+
+
+static int s3triofbcon_switch(int con, struct fb_info *info)
+{
+ /* Do we have to save the colormap? */
+ if (fb_display[info->currcon].cmap.len)
+ fb_get_cmap(&fb_display[info->currcon].cmap, 1, s3trio_getcolreg, info);
+
+ info->currcon = con;
+ /* Install new colormap */
+ do_install_cmap(con,info);
+ return 0;
+}
+
+ /*
+ * Update the `var' structure (called by fbcon.c)
+ */
+
+static int s3triofbcon_updatevar(int con, struct fb_info *info)
+{
+ /* Nothing */
+ return 0;
+}
+
+ /*
+ * Blank the display.
+ */
+
+static int s3triofb_blank(int blank, struct fb_info *info)
+{
+ unsigned char x;
+
+ mem_out8(0x1, s3trio_base+0x1008000 + 0x03c4);
+ x = mem_in8(s3trio_base+0x1008000 + 0x03c5);
+ mem_out8((x & (~0x20)) | (blank << 5), s3trio_base+0x1008000 + 0x03c5);
+ return 0;
+}
+
+ /*
+ * Read a single color register and split it into
+ * colors/transparent. Return != 0 for invalid regno.
+ */
+
+static int s3trio_getcolreg(u_int regno, u_int *red, u_int *green, u_int *blue,
+ u_int *transp, struct fb_info *info)
+{
+ if (regno > 255)
+ return 1;
+ *red = (palette[regno].red << 8) | palette[regno].red;
+ *green = (palette[regno].green << 8) | palette[regno].green;
+ *blue = (palette[regno].blue << 8) | palette[regno].blue;
+ *transp = 0;
+ return 0;
+}
+
+
+ /*
+ * Set a single color register. Return != 0 for invalid regno.
+ */
+
+static int s3trio_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
+ u_int transp, struct fb_info *info)
+{
+ if (regno > 255)
+ return 1;
+
+ red >>= 8;
+ green >>= 8;
+ blue >>= 8;
+ palette[regno].red = red;
+ palette[regno].green = green;
+ palette[regno].blue = blue;
+
+ mem_out8(regno,s3trio_base+0x1008000 + 0x3c8);
+ mem_out8((red & 0xff) >> 2,s3trio_base+0x1008000 + 0x3c9);
+ mem_out8((green & 0xff) >> 2,s3trio_base+0x1008000 + 0x3c9);
+ mem_out8((blue & 0xff) >> 2,s3trio_base+0x1008000 + 0x3c9);
+
+ return 0;
+}
+
+static void Trio_WaitQueue(u_short fifo) {
+
+ u_short status;
+
+ do
+ {
+ status = mem_in16(s3trio_base + 0x1000000 + 0x9AE8);
+ } while (!(status & fifo));
+
+}
+
+static void Trio_WaitBlit(void) {
+
+ u_short status;
+
+ do
+ {
+ status = mem_in16(s3trio_base + 0x1000000 + 0x9AE8);
+ } while (status & 0x200);
+
+}
+
+static void Trio_BitBLT(u_short curx, u_short cury, u_short destx,
+ u_short desty, u_short width, u_short height,
+ u_short mode) {
+
+ u_short blitcmd = 0xc011;
+
+ /* Set drawing direction */
+ /* -Y, X maj, -X (default) */
+
+ if (curx > destx)
+ blitcmd |= 0x0020; /* Drawing direction +X */
+ else {
+ curx += (width - 1);
+ destx += (width - 1);
+ }
+
+ if (cury > desty)
+ blitcmd |= 0x0080; /* Drawing direction +Y */
+ else {
+ cury += (height - 1);
+ desty += (height - 1);
+ }
+
+ Trio_WaitQueue(0x0400);
+
+ outw(0xa000, 0xBEE8);
+ outw(0x60 | mode, 0xBAE8);
+
+ outw(curx, 0x86E8);
+ outw(cury, 0x82E8);
+
+ outw(destx, 0x8EE8);
+ outw(desty, 0x8AE8);
+
+ outw(height - 1, 0xBEE8);
+ outw(width - 1, 0x96E8);
+
+ outw(blitcmd, 0x9AE8);
+
+}
+
+static void Trio_RectFill(u_short x, u_short y, u_short width, u_short height,
+ u_short mode, u_short color) {
+
+ u_short blitcmd = 0x40b1;
+
+ Trio_WaitQueue(0x0400);
+
+ outw(0xa000, 0xBEE8);
+ outw((0x20 | mode), 0xBAE8);
+ outw(0xe000, 0xBEE8);
+ outw(color, 0xA6E8);
+ outw(x, 0x86E8);
+ outw(y, 0x82E8);
+ outw((height - 1), 0xBEE8);
+ outw((width - 1), 0x96E8);
+ outw(blitcmd, 0x9AE8);
+
+}
+
+
+static void Trio_MoveCursor(u_short x, u_short y) {
+
+ mem_out8(0x39, s3trio_base + 0x1008000 + 0x3d4);
+ mem_out8(0xa0, s3trio_base + 0x1008000 + 0x3d5);
+
+ mem_out8(0x46, s3trio_base + 0x1008000 + 0x3d4);
+ mem_out8((x & 0x0700) >> 8, s3trio_base + 0x1008000 + 0x3d5);
+ mem_out8(0x47, s3trio_base + 0x1008000 + 0x3d4);
+ mem_out8(x & 0x00ff, s3trio_base + 0x1008000 + 0x3d5);
+
+ mem_out8(0x48, s3trio_base + 0x1008000 + 0x3d4);
+ mem_out8((y & 0x0700) >> 8, s3trio_base + 0x1008000 + 0x3d5);
+ mem_out8(0x49, s3trio_base + 0x1008000 + 0x3d4);
+ mem_out8(y & 0x00ff, s3trio_base + 0x1008000 + 0x3d5);
+
+}
+
+
+ /*
+ * Text console acceleration
+ */
+
+#ifdef FBCON_HAS_CFB8
+static void fbcon_trio8_bmove(struct display *p, int sy, int sx, int dy,
+ int dx, int height, int width)
+{
+ sx *= 8; dx *= 8; width *= 8;
+ Trio_BitBLT((u_short)sx, (u_short)(sy*fontheight(p)), (u_short)dx,
+ (u_short)(dy*fontheight(p)), (u_short)width,
+ (u_short)(height*fontheight(p)), (u_short)S3_NEW);
+}
+
+static void fbcon_trio8_clear(struct vc_data *conp, struct display *p, int sy,
+ int sx, int height, int width)
+{
+ unsigned char bg;
+
+ sx *= 8; width *= 8;
+ bg = attr_bgcol_ec(p,conp);
+ Trio_RectFill((u_short)sx,
+ (u_short)(sy*fontheight(p)),
+ (u_short)width,
+ (u_short)(height*fontheight(p)),
+ (u_short)S3_NEW,
+ (u_short)bg);
+}
+
+static void fbcon_trio8_putc(struct vc_data *conp, struct display *p, int c,
+ int yy, int xx)
+{
+ Trio_WaitBlit();
+ fbcon_cfb8_putc(conp, p, c, yy, xx);
+}
+
+static void fbcon_trio8_putcs(struct vc_data *conp, struct display *p,
+ const unsigned short *s, int count, int yy, int xx)
+{
+ Trio_WaitBlit();
+ fbcon_cfb8_putcs(conp, p, s, count, yy, xx);
+}
+
+static void fbcon_trio8_revc(struct display *p, int xx, int yy)
+{
+ Trio_WaitBlit();
+ fbcon_cfb8_revc(p, xx, yy);
+}
+
+static struct display_switch fbcon_trio8 = {
+ .setup = fbcon_cfb8_setup,
+ .bmove = fbcon_trio8_bmove,
+ .clear = fbcon_trio8_clear,
+ .putc = fbcon_trio8_putc,
+ .putcs = fbcon_trio8_putcs,
+ .revc = fbcon_trio8_revc,
+ .clear_margins = fbcon_cfb8_clear_margins,
+ .fontwidthmask = FONTWIDTH(8)
+};
+#endif
+
+MODULE_LICENSE("GPL");