diff --git a/drivers/video/amba-clcd.c b/drivers/video/amba-clcd.c
new file mode 100644
index 0000000..acdba0c
--- /dev/null
+++ b/drivers/video/amba-clcd.c
@@ -0,0 +1,533 @@
+/*
+ *  linux/drivers/video/amba-clcd.c
+ *
+ * Copyright (C) 2001 ARM Limited, by David A Rusling
+ * Updated to 2.5, Deep Blue Solutions Ltd.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file COPYING in the main directory of this archive
+ * for more details.
+ *
+ *  ARM PrimeCell PL110 Color LCD Controller
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/mm.h>
+#include <linux/fb.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/list.h>
+
+#include <asm/hardware/amba.h>
+#include <asm/hardware/clock.h>
+
+#include <asm/hardware/amba_clcd.h>
+
+#define to_clcd(info)	container_of(info, struct clcd_fb, fb)
+
+/* This is limited to 16 characters when displayed by X startup */
+static const char *clcd_name = "CLCD FB";
+
+/*
+ * Unfortunately, the enable/disable functions may be called either from
+ * process or IRQ context, and we _need_ to delay.  This is _not_ good.
+ */
+static inline void clcdfb_sleep(unsigned int ms)
+{
+	if (in_atomic()) {
+		mdelay(ms);
+	} else {
+		msleep(ms);
+	}
+}
+
+static inline void clcdfb_set_start(struct clcd_fb *fb)
+{
+	unsigned long ustart = fb->fb.fix.smem_start;
+	unsigned long lstart;
+
+	ustart += fb->fb.var.yoffset * fb->fb.fix.line_length;
+	lstart = ustart + fb->fb.var.yres * fb->fb.fix.line_length / 2;
+
+	writel(ustart, fb->regs + CLCD_UBAS);
+	writel(lstart, fb->regs + CLCD_LBAS);
+}
+
+static void clcdfb_disable(struct clcd_fb *fb)
+{
+	u32 val;
+
+	if (fb->board->disable)
+		fb->board->disable(fb);
+
+	val = readl(fb->regs + CLCD_CNTL);
+	if (val & CNTL_LCDPWR) {
+		val &= ~CNTL_LCDPWR;
+		writel(val, fb->regs + CLCD_CNTL);
+
+		clcdfb_sleep(20);
+	}
+	if (val & CNTL_LCDEN) {
+		val &= ~CNTL_LCDEN;
+		writel(val, fb->regs + CLCD_CNTL);
+	}
+
+	/*
+	 * Disable CLCD clock source.
+	 */
+	clk_disable(fb->clk);
+}
+
+static void clcdfb_enable(struct clcd_fb *fb, u32 cntl)
+{
+	/*
+	 * Enable the CLCD clock source.
+	 */
+	clk_enable(fb->clk);
+
+	/*
+	 * Bring up by first enabling..
+	 */
+	cntl |= CNTL_LCDEN;
+	writel(cntl, fb->regs + CLCD_CNTL);
+
+	clcdfb_sleep(20);
+
+	/*
+	 * and now apply power.
+	 */
+	cntl |= CNTL_LCDPWR;
+	writel(cntl, fb->regs + CLCD_CNTL);
+
+	/*
+	 * finally, enable the interface.
+	 */
+	if (fb->board->enable)
+		fb->board->enable(fb);
+}
+
+static int
+clcdfb_set_bitfields(struct clcd_fb *fb, struct fb_var_screeninfo *var)
+{
+	int ret = 0;
+
+	memset(&var->transp, 0, sizeof(var->transp));
+	memset(&var->red, 0, sizeof(var->red));
+	memset(&var->green, 0, sizeof(var->green));
+	memset(&var->blue, 0, sizeof(var->blue));
+
+	switch (var->bits_per_pixel) {
+	case 1:
+	case 2:
+	case 4:
+	case 8:
+		var->red.length		= 8;
+		var->red.offset		= 0;
+		var->green.length	= 8;
+		var->green.offset	= 0;
+		var->blue.length	= 8;
+		var->blue.offset	= 0;
+		break;
+	case 16:
+		var->red.length		= 5;
+		var->green.length	= 5;
+		var->blue.length	= 5;
+		if (fb->panel->cntl & CNTL_BGR) {
+			var->red.offset		= 10;
+			var->green.offset	= 5;
+			var->blue.offset	= 0;
+		} else {
+			var->red.offset		= 0;
+			var->green.offset	= 5;
+			var->blue.offset	= 10;
+		}
+		break;
+	case 24:
+		if (fb->panel->cntl & CNTL_LCDTFT) {
+			var->red.length		= 8;
+			var->green.length	= 8;
+			var->blue.length	= 8;
+
+			if (fb->panel->cntl & CNTL_BGR) {
+				var->red.offset		= 16;
+				var->green.offset	= 8;
+				var->blue.offset	= 0;
+			} else {
+				var->red.offset		= 0;
+				var->green.offset	= 8;
+				var->blue.offset	= 16;
+			}
+			break;
+		}
+	default:
+		ret = -EINVAL;
+		break;
+	}
+
+	return ret;
+}
+
+static int clcdfb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
+{
+	struct clcd_fb *fb = to_clcd(info);
+	int ret = -EINVAL;
+
+	if (fb->board->check)
+		ret = fb->board->check(fb, var);
+	if (ret == 0)
+		ret = clcdfb_set_bitfields(fb, var);
+
+	return ret;
+}
+
+static int clcdfb_set_par(struct fb_info *info)
+{
+	struct clcd_fb *fb = to_clcd(info);
+	struct clcd_regs regs;
+
+	fb->fb.fix.line_length = fb->fb.var.xres_virtual *
+				 fb->fb.var.bits_per_pixel / 8;
+
+	if (fb->fb.var.bits_per_pixel <= 8)
+		fb->fb.fix.visual = FB_VISUAL_PSEUDOCOLOR;
+	else
+		fb->fb.fix.visual = FB_VISUAL_TRUECOLOR;
+
+	fb->board->decode(fb, &regs);
+
+	clcdfb_disable(fb);
+
+	writel(regs.tim0, fb->regs + CLCD_TIM0);
+	writel(regs.tim1, fb->regs + CLCD_TIM1);
+	writel(regs.tim2, fb->regs + CLCD_TIM2);
+	writel(regs.tim3, fb->regs + CLCD_TIM3);
+
+	clcdfb_set_start(fb);
+
+	clk_set_rate(fb->clk, (1000000000 / regs.pixclock) * 1000);
+
+	fb->clcd_cntl = regs.cntl;
+
+	clcdfb_enable(fb, regs.cntl);
+
+#ifdef DEBUG
+	printk(KERN_INFO "CLCD: Registers set to\n"
+	       KERN_INFO "  %08x %08x %08x %08x\n"
+	       KERN_INFO "  %08x %08x %08x %08x\n",
+		readl(fb->regs + CLCD_TIM0), readl(fb->regs + CLCD_TIM1),
+		readl(fb->regs + CLCD_TIM2), readl(fb->regs + CLCD_TIM3),
+		readl(fb->regs + CLCD_UBAS), readl(fb->regs + CLCD_LBAS),
+		readl(fb->regs + CLCD_IENB), readl(fb->regs + CLCD_CNTL));
+#endif
+
+	return 0;
+}
+
+static inline u32 convert_bitfield(int val, struct fb_bitfield *bf)
+{
+	unsigned int mask = (1 << bf->length) - 1;
+
+	return (val >> (16 - bf->length) & mask) << bf->offset;
+}
+
+/*
+ *  Set a single color register. The values supplied have a 16 bit
+ *  magnitude.  Return != 0 for invalid regno.
+ */
+static int
+clcdfb_setcolreg(unsigned int regno, unsigned int red, unsigned int green,
+		 unsigned int blue, unsigned int transp, struct fb_info *info)
+{
+	struct clcd_fb *fb = to_clcd(info);
+
+	if (regno < 16)
+		fb->cmap[regno] = convert_bitfield(transp, &fb->fb.var.transp) |
+				  convert_bitfield(blue, &fb->fb.var.blue) |
+				  convert_bitfield(green, &fb->fb.var.green) |
+				  convert_bitfield(red, &fb->fb.var.red);
+
+	if (fb->fb.var.bits_per_pixel == 8 && regno < 256) {
+		int hw_reg = CLCD_PALETTE + ((regno * 2) & ~3);
+		u32 val, mask, newval;
+
+		newval  = (red >> 11)  & 0x001f;
+		newval |= (green >> 6) & 0x03e0;
+		newval |= (blue >> 1)  & 0x7c00;
+
+		/*
+		 * 3.2.11: if we're configured for big endian
+		 * byte order, the palette entries are swapped.
+		 */
+		if (fb->clcd_cntl & CNTL_BEBO)
+			regno ^= 1;
+
+		if (regno & 1) {
+			newval <<= 16;
+			mask = 0x0000ffff;
+		} else {
+			mask = 0xffff0000;
+		}
+
+		val = readl(fb->regs + hw_reg) & mask;
+		writel(val | newval, fb->regs + hw_reg);
+	}
+
+	return regno > 255;
+}
+
+/*
+ *  Blank the screen if blank_mode != 0, else unblank. If blank == NULL
+ *  then the caller blanks by setting the CLUT (Color Look Up Table) to all
+ *  black. Return 0 if blanking succeeded, != 0 if un-/blanking failed due
+ *  to e.g. a video mode which doesn't support it. Implements VESA suspend
+ *  and powerdown modes on hardware that supports disabling hsync/vsync:
+ *    blank_mode == 2: suspend vsync
+ *    blank_mode == 3: suspend hsync
+ *    blank_mode == 4: powerdown
+ */
+static int clcdfb_blank(int blank_mode, struct fb_info *info)
+{
+	struct clcd_fb *fb = to_clcd(info);
+
+	if (blank_mode != 0) {
+		clcdfb_disable(fb);
+	} else {
+		clcdfb_enable(fb, fb->clcd_cntl);
+	}
+	return 0;
+}
+
+static int clcdfb_mmap(struct fb_info *info, struct file *file,
+		       struct vm_area_struct *vma)
+{
+	struct clcd_fb *fb = to_clcd(info);
+	unsigned long len, off = vma->vm_pgoff << PAGE_SHIFT;
+	int ret = -EINVAL;
+
+	len = info->fix.smem_len;
+
+	if (off <= len && vma->vm_end - vma->vm_start <= len - off &&
+	    fb->board->mmap)
+		ret = fb->board->mmap(fb, vma);
+
+	return ret;
+}
+
+static struct fb_ops clcdfb_ops = {
+	.owner		= THIS_MODULE,
+	.fb_check_var	= clcdfb_check_var,
+	.fb_set_par	= clcdfb_set_par,
+	.fb_setcolreg	= clcdfb_setcolreg,
+	.fb_blank	= clcdfb_blank,
+	.fb_fillrect	= cfb_fillrect,
+	.fb_copyarea	= cfb_copyarea,
+	.fb_imageblit	= cfb_imageblit,
+	.fb_cursor	= soft_cursor,
+	.fb_mmap	= clcdfb_mmap,
+};
+
+static int clcdfb_register(struct clcd_fb *fb)
+{
+	int ret;
+
+	fb->clk = clk_get(&fb->dev->dev, "CLCDCLK");
+	if (IS_ERR(fb->clk)) {
+		ret = PTR_ERR(fb->clk);
+		goto out;
+	}
+
+	ret = clk_use(fb->clk);
+	if (ret)
+		goto free_clk;
+
+	fb->fb.fix.mmio_start	= fb->dev->res.start;
+	fb->fb.fix.mmio_len	= SZ_4K;
+
+	fb->regs = ioremap(fb->fb.fix.mmio_start, fb->fb.fix.mmio_len);
+	if (!fb->regs) {
+		printk(KERN_ERR "CLCD: unable to remap registers\n");
+		ret = -ENOMEM;
+		goto unuse_clk;
+	}
+
+	fb->fb.fbops		= &clcdfb_ops;
+	fb->fb.flags		= FBINFO_FLAG_DEFAULT;
+	fb->fb.pseudo_palette	= fb->cmap;
+
+	strncpy(fb->fb.fix.id, clcd_name, sizeof(fb->fb.fix.id));
+	fb->fb.fix.type		= FB_TYPE_PACKED_PIXELS;
+	fb->fb.fix.type_aux	= 0;
+	fb->fb.fix.xpanstep	= 0;
+	fb->fb.fix.ypanstep	= 0;
+	fb->fb.fix.ywrapstep	= 0;
+	fb->fb.fix.accel	= FB_ACCEL_NONE;
+
+	fb->fb.var.xres		= fb->panel->mode.xres;
+	fb->fb.var.yres		= fb->panel->mode.yres;
+	fb->fb.var.xres_virtual	= fb->panel->mode.xres;
+	fb->fb.var.yres_virtual	= fb->panel->mode.yres;
+	fb->fb.var.bits_per_pixel = fb->panel->bpp;
+	fb->fb.var.grayscale	= fb->panel->grayscale;
+	fb->fb.var.pixclock	= fb->panel->mode.pixclock;
+	fb->fb.var.left_margin	= fb->panel->mode.left_margin;
+	fb->fb.var.right_margin	= fb->panel->mode.right_margin;
+	fb->fb.var.upper_margin	= fb->panel->mode.upper_margin;
+	fb->fb.var.lower_margin	= fb->panel->mode.lower_margin;
+	fb->fb.var.hsync_len	= fb->panel->mode.hsync_len;
+	fb->fb.var.vsync_len	= fb->panel->mode.vsync_len;
+	fb->fb.var.sync		= fb->panel->mode.sync;
+	fb->fb.var.vmode	= fb->panel->mode.vmode;
+	fb->fb.var.activate	= FB_ACTIVATE_NOW;
+	fb->fb.var.nonstd	= 0;
+	fb->fb.var.height	= fb->panel->height;
+	fb->fb.var.width	= fb->panel->width;
+	fb->fb.var.accel_flags	= 0;
+
+	fb->fb.monspecs.hfmin	= 0;
+	fb->fb.monspecs.hfmax   = 100000;
+	fb->fb.monspecs.vfmin	= 0;
+	fb->fb.monspecs.vfmax	= 400;
+	fb->fb.monspecs.dclkmin = 1000000;
+	fb->fb.monspecs.dclkmax	= 100000000;
+
+	/*
+	 * Make sure that the bitfields are set appropriately.
+	 */
+	clcdfb_set_bitfields(fb, &fb->fb.var);
+
+	/*
+	 * Allocate colourmap.
+	 */
+	fb_alloc_cmap(&fb->fb.cmap, 256, 0);
+
+	/*
+	 * Ensure interrupts are disabled.
+	 */
+	writel(0, fb->regs + CLCD_IENB);
+
+	fb_set_var(&fb->fb, &fb->fb.var);
+
+        printk(KERN_INFO "CLCD: %s hardware, %s display\n",
+               fb->board->name, fb->panel->mode.name);
+
+	ret = register_framebuffer(&fb->fb);
+	if (ret == 0)
+		goto out;
+
+	printk(KERN_ERR "CLCD: cannot register framebuffer (%d)\n", ret);
+
+	iounmap(fb->regs);
+ unuse_clk:
+	clk_unuse(fb->clk);
+ free_clk:
+	clk_put(fb->clk);
+ out:
+	return ret;
+}
+
+static int clcdfb_probe(struct amba_device *dev, void *id)
+{
+	struct clcd_board *board = dev->dev.platform_data;
+	struct clcd_fb *fb;
+	int ret;
+
+	if (!board)
+		return -EINVAL;
+
+	ret = amba_request_regions(dev, NULL);
+	if (ret) {
+		printk(KERN_ERR "CLCD: unable to reserve regs region\n");
+		goto out;
+	}
+
+	fb = (struct clcd_fb *) kmalloc(sizeof(struct clcd_fb), GFP_KERNEL);
+	if (!fb) {
+		printk(KERN_INFO "CLCD: could not allocate new clcd_fb struct\n");
+		ret = -ENOMEM;
+		goto free_region;
+	}
+	memset(fb, 0, sizeof(struct clcd_fb));
+
+	fb->dev = dev;
+	fb->board = board;
+
+	ret = fb->board->setup(fb);
+	if (ret)
+		goto free_fb;
+
+	ret = clcdfb_register(fb); 
+	if (ret == 0) {
+		amba_set_drvdata(dev, fb);
+		goto out;
+	}
+
+	fb->board->remove(fb);
+ free_fb:
+	kfree(fb);
+ free_region:
+	amba_release_regions(dev);
+ out:
+	return ret;
+}
+
+static int clcdfb_remove(struct amba_device *dev)
+{
+	struct clcd_fb *fb = amba_get_drvdata(dev);
+
+	amba_set_drvdata(dev, NULL);
+
+	clcdfb_disable(fb);
+	unregister_framebuffer(&fb->fb);
+	iounmap(fb->regs);
+	clk_unuse(fb->clk);
+	clk_put(fb->clk);
+
+	fb->board->remove(fb);
+
+	kfree(fb);
+
+	amba_release_regions(dev);
+
+	return 0;
+}
+
+static struct amba_id clcdfb_id_table[] = {
+	{
+		.id	= 0x00041110,
+		.mask	= 0x000fffff,
+	},
+	{ 0, 0 },
+};
+
+static struct amba_driver clcd_driver = {
+	.drv 		= {
+		.name	= "clcd-pl110",
+	},
+	.probe		= clcdfb_probe,
+	.remove		= clcdfb_remove,
+	.id_table	= clcdfb_id_table,
+};
+
+int __init amba_clcdfb_init(void)
+{
+	if (fb_get_options("ambafb", NULL))
+		return -ENODEV;
+
+	return amba_driver_register(&clcd_driver);
+}
+
+module_init(amba_clcdfb_init);
+
+static void __exit amba_clcdfb_exit(void)
+{
+	amba_driver_unregister(&clcd_driver);
+}
+
+module_exit(amba_clcdfb_exit);
+
+MODULE_DESCRIPTION("ARM PrimeCell PL110 CLCD core driver");
+MODULE_LICENSE("GPL");