Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c
new file mode 100644
index 0000000..483ad9b
--- /dev/null
+++ b/drivers/video/pxafb.c
@@ -0,0 +1,1390 @@
+/*
+ * linux/drivers/video/pxafb.c
+ *
+ * Copyright (C) 1999 Eric A. Thomas.
+ * Copyright (C) 2004 Jean-Frederic Clere.
+ * Copyright (C) 2004 Ian Campbell.
+ * Copyright (C) 2004 Jeff Lackey.
+ * Based on sa1100fb.c Copyright (C) 1999 Eric A. Thomas
+ * which in turn is
+ * Based on acornfb.c Copyright (C) Russell King.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
+ *
+ * Intel PXA250/210 LCD Controller Frame Buffer Driver
+ *
+ * Please direct your questions and comments on this driver to the following
+ * email address:
+ *
+ * linux-arm-kernel@lists.arm.linux.org.uk
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+#include <linux/fb.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/cpufreq.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+
+#include <asm/hardware.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+#include <asm/arch/pxa-regs.h>
+#include <asm/arch/bitfield.h>
+#include <asm/arch/pxafb.h>
+
+/*
+ * Complain if VAR is out of range.
+ */
+#define DEBUG_VAR 1
+
+#include "pxafb.h"
+
+/* Bits which should not be set in machine configuration structures */
+#define LCCR0_INVALID_CONFIG_MASK (LCCR0_OUM|LCCR0_BM|LCCR0_QDM|LCCR0_DIS|LCCR0_EFM|LCCR0_IUM|LCCR0_SFM|LCCR0_LDM|LCCR0_ENB)
+#define LCCR3_INVALID_CONFIG_MASK (LCCR3_HSP|LCCR3_VSP|LCCR3_PCD|LCCR3_BPP)
+
+static void (*pxafb_backlight_power)(int);
+static void (*pxafb_lcd_power)(int);
+
+static int pxafb_activate_var(struct fb_var_screeninfo *var, struct pxafb_info *);
+static void set_ctrlr_state(struct pxafb_info *fbi, u_int state);
+
+#ifdef CONFIG_FB_PXA_PARAMETERS
+#define PXAFB_OPTIONS_SIZE 256
+static char g_options[PXAFB_OPTIONS_SIZE] __initdata = "";
+#endif
+
+static inline void pxafb_schedule_work(struct pxafb_info *fbi, u_int state)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+ /*
+ * We need to handle two requests being made at the same time.
+ * There are two important cases:
+ * 1. When we are changing VT (C_REENABLE) while unblanking (C_ENABLE)
+ * We must perform the unblanking, which will do our REENABLE for us.
+ * 2. When we are blanking, but immediately unblank before we have
+ * blanked. We do the "REENABLE" thing here as well, just to be sure.
+ */
+ if (fbi->task_state == C_ENABLE && state == C_REENABLE)
+ state = (u_int) -1;
+ if (fbi->task_state == C_DISABLE && state == C_ENABLE)
+ state = C_REENABLE;
+
+ if (state != (u_int)-1) {
+ fbi->task_state = state;
+ schedule_work(&fbi->task);
+ }
+ local_irq_restore(flags);
+}
+
+static inline u_int chan_to_field(u_int chan, struct fb_bitfield *bf)
+{
+ chan &= 0xffff;
+ chan >>= 16 - bf->length;
+ return chan << bf->offset;
+}
+
+static int
+pxafb_setpalettereg(u_int regno, u_int red, u_int green, u_int blue,
+ u_int trans, struct fb_info *info)
+{
+ struct pxafb_info *fbi = (struct pxafb_info *)info;
+ u_int val, ret = 1;
+
+ if (regno < fbi->palette_size) {
+ if (fbi->fb.var.grayscale) {
+ val = ((blue >> 8) & 0x00ff);
+ } else {
+ val = ((red >> 0) & 0xf800);
+ val |= ((green >> 5) & 0x07e0);
+ val |= ((blue >> 11) & 0x001f);
+ }
+ fbi->palette_cpu[regno] = val;
+ ret = 0;
+ }
+ return ret;
+}
+
+static int
+pxafb_setcolreg(u_int regno, u_int red, u_int green, u_int blue,
+ u_int trans, struct fb_info *info)
+{
+ struct pxafb_info *fbi = (struct pxafb_info *)info;
+ unsigned int val;
+ int ret = 1;
+
+ /*
+ * If inverse mode was selected, invert all the colours
+ * rather than the register number. The register number
+ * is what you poke into the framebuffer to produce the
+ * colour you requested.
+ */
+ if (fbi->cmap_inverse) {
+ red = 0xffff - red;
+ green = 0xffff - green;
+ blue = 0xffff - blue;
+ }
+
+ /*
+ * If greyscale is true, then we convert the RGB value
+ * to greyscale no matter what visual we are using.
+ */
+ if (fbi->fb.var.grayscale)
+ red = green = blue = (19595 * red + 38470 * green +
+ 7471 * blue) >> 16;
+
+ switch (fbi->fb.fix.visual) {
+ case FB_VISUAL_TRUECOLOR:
+ /*
+ * 16-bit True Colour. We encode the RGB value
+ * according to the RGB bitfield information.
+ */
+ if (regno < 16) {
+ u32 *pal = fbi->fb.pseudo_palette;
+
+ val = chan_to_field(red, &fbi->fb.var.red);
+ val |= chan_to_field(green, &fbi->fb.var.green);
+ val |= chan_to_field(blue, &fbi->fb.var.blue);
+
+ pal[regno] = val;
+ ret = 0;
+ }
+ break;
+
+ case FB_VISUAL_STATIC_PSEUDOCOLOR:
+ case FB_VISUAL_PSEUDOCOLOR:
+ ret = pxafb_setpalettereg(regno, red, green, blue, trans, info);
+ break;
+ }
+
+ return ret;
+}
+
+/*
+ * pxafb_bpp_to_lccr3():
+ * Convert a bits per pixel value to the correct bit pattern for LCCR3
+ */
+static int pxafb_bpp_to_lccr3(struct fb_var_screeninfo *var)
+{
+ int ret = 0;
+ switch (var->bits_per_pixel) {
+ case 1: ret = LCCR3_1BPP; break;
+ case 2: ret = LCCR3_2BPP; break;
+ case 4: ret = LCCR3_4BPP; break;
+ case 8: ret = LCCR3_8BPP; break;
+ case 16: ret = LCCR3_16BPP; break;
+ }
+ return ret;
+}
+
+#ifdef CONFIG_CPU_FREQ
+/*
+ * pxafb_display_dma_period()
+ * Calculate the minimum period (in picoseconds) between two DMA
+ * requests for the LCD controller. If we hit this, it means we're
+ * doing nothing but LCD DMA.
+ */
+static unsigned int pxafb_display_dma_period(struct fb_var_screeninfo *var)
+{
+ /*
+ * Period = pixclock * bits_per_byte * bytes_per_transfer
+ * / memory_bits_per_pixel;
+ */
+ return var->pixclock * 8 * 16 / var->bits_per_pixel;
+}
+
+extern unsigned int get_clk_frequency_khz(int info);
+#endif
+
+/*
+ * pxafb_check_var():
+ * Get the video params out of 'var'. If a value doesn't fit, round it up,
+ * if it's too big, return -EINVAL.
+ *
+ * Round up in the following order: bits_per_pixel, xres,
+ * yres, xres_virtual, yres_virtual, xoffset, yoffset, grayscale,
+ * bitfields, horizontal timing, vertical timing.
+ */
+static int pxafb_check_var(struct fb_var_screeninfo *var, struct fb_info *info)
+{
+ struct pxafb_info *fbi = (struct pxafb_info *)info;
+
+ if (var->xres < MIN_XRES)
+ var->xres = MIN_XRES;
+ if (var->yres < MIN_YRES)
+ var->yres = MIN_YRES;
+ if (var->xres > fbi->max_xres)
+ var->xres = fbi->max_xres;
+ if (var->yres > fbi->max_yres)
+ var->yres = fbi->max_yres;
+ var->xres_virtual =
+ max(var->xres_virtual, var->xres);
+ var->yres_virtual =
+ max(var->yres_virtual, var->yres);
+
+ /*
+ * Setup the RGB parameters for this display.
+ *
+ * The pixel packing format is described on page 7-11 of the
+ * PXA2XX Developer's Manual.
+ */
+ if (var->bits_per_pixel == 16) {
+ var->red.offset = 11; var->red.length = 5;
+ var->green.offset = 5; var->green.length = 6;
+ var->blue.offset = 0; var->blue.length = 5;
+ var->transp.offset = var->transp.length = 0;
+ } else {
+ var->red.offset = var->green.offset = var->blue.offset = var->transp.offset = 0;
+ var->red.length = 8;
+ var->green.length = 8;
+ var->blue.length = 8;
+ var->transp.length = 0;
+ }
+
+#ifdef CONFIG_CPU_FREQ
+ DPRINTK("dma period = %d ps, clock = %d kHz\n",
+ pxafb_display_dma_period(var),
+ get_clk_frequency_khz(0));
+#endif
+
+ return 0;
+}
+
+static inline void pxafb_set_truecolor(u_int is_true_color)
+{
+ DPRINTK("true_color = %d\n", is_true_color);
+ // do your machine-specific setup if needed
+}
+
+/*
+ * pxafb_set_par():
+ * Set the user defined part of the display for the specified console
+ */
+static int pxafb_set_par(struct fb_info *info)
+{
+ struct pxafb_info *fbi = (struct pxafb_info *)info;
+ struct fb_var_screeninfo *var = &info->var;
+ unsigned long palette_mem_size;
+
+ DPRINTK("set_par\n");
+
+ if (var->bits_per_pixel == 16)
+ fbi->fb.fix.visual = FB_VISUAL_TRUECOLOR;
+ else if (!fbi->cmap_static)
+ fbi->fb.fix.visual = FB_VISUAL_PSEUDOCOLOR;
+ else {
+ /*
+ * Some people have weird ideas about wanting static
+ * pseudocolor maps. I suspect their user space
+ * applications are broken.
+ */
+ fbi->fb.fix.visual = FB_VISUAL_STATIC_PSEUDOCOLOR;
+ }
+
+ fbi->fb.fix.line_length = var->xres_virtual *
+ var->bits_per_pixel / 8;
+ if (var->bits_per_pixel == 16)
+ fbi->palette_size = 0;
+ else
+ fbi->palette_size = var->bits_per_pixel == 1 ? 4 : 1 << var->bits_per_pixel;
+
+ palette_mem_size = fbi->palette_size * sizeof(u16);
+
+ DPRINTK("palette_mem_size = 0x%08lx\n", (u_long) palette_mem_size);
+
+ fbi->palette_cpu = (u16 *)(fbi->map_cpu + PAGE_SIZE - palette_mem_size);
+ fbi->palette_dma = fbi->map_dma + PAGE_SIZE - palette_mem_size;
+
+ /*
+ * Set (any) board control register to handle new color depth
+ */
+ pxafb_set_truecolor(fbi->fb.fix.visual == FB_VISUAL_TRUECOLOR);
+
+ if (fbi->fb.var.bits_per_pixel == 16)
+ fb_dealloc_cmap(&fbi->fb.cmap);
+ else
+ fb_alloc_cmap(&fbi->fb.cmap, 1<<fbi->fb.var.bits_per_pixel, 0);
+
+ pxafb_activate_var(var, fbi);
+
+ return 0;
+}
+
+/*
+ * Formal definition of the VESA spec:
+ * On
+ * This refers to the state of the display when it is in full operation
+ * Stand-By
+ * This defines an optional operating state of minimal power reduction with
+ * the shortest recovery time
+ * Suspend
+ * This refers to a level of power management in which substantial power
+ * reduction is achieved by the display. The display can have a longer
+ * recovery time from this state than from the Stand-by state
+ * Off
+ * This indicates that the display is consuming the lowest level of power
+ * and is non-operational. Recovery from this state may optionally require
+ * the user to manually power on the monitor
+ *
+ * Now, the fbdev driver adds an additional state, (blank), where they
+ * turn off the video (maybe by colormap tricks), but don't mess with the
+ * video itself: think of it semantically between on and Stand-By.
+ *
+ * So here's what we should do in our fbdev blank routine:
+ *
+ * VESA_NO_BLANKING (mode 0) Video on, front/back light on
+ * VESA_VSYNC_SUSPEND (mode 1) Video on, front/back light off
+ * VESA_HSYNC_SUSPEND (mode 2) Video on, front/back light off
+ * VESA_POWERDOWN (mode 3) Video off, front/back light off
+ *
+ * This will match the matrox implementation.
+ */
+
+/*
+ * pxafb_blank():
+ * Blank the display by setting all palette values to zero. Note, the
+ * 16 bpp mode does not really use the palette, so this will not
+ * blank the display in all modes.
+ */
+static int pxafb_blank(int blank, struct fb_info *info)
+{
+ struct pxafb_info *fbi = (struct pxafb_info *)info;
+ int i;
+
+ DPRINTK("pxafb_blank: blank=%d\n", blank);
+
+ switch (blank) {
+ case FB_BLANK_POWERDOWN:
+ case FB_BLANK_VSYNC_SUSPEND:
+ case FB_BLANK_HSYNC_SUSPEND:
+ case FB_BLANK_NORMAL:
+ if (fbi->fb.fix.visual == FB_VISUAL_PSEUDOCOLOR ||
+ fbi->fb.fix.visual == FB_VISUAL_STATIC_PSEUDOCOLOR)
+ for (i = 0; i < fbi->palette_size; i++)
+ pxafb_setpalettereg(i, 0, 0, 0, 0, info);
+
+ pxafb_schedule_work(fbi, C_DISABLE);
+ //TODO if (pxafb_blank_helper) pxafb_blank_helper(blank);
+ break;
+
+ case FB_BLANK_UNBLANK:
+ //TODO if (pxafb_blank_helper) pxafb_blank_helper(blank);
+ if (fbi->fb.fix.visual == FB_VISUAL_PSEUDOCOLOR ||
+ fbi->fb.fix.visual == FB_VISUAL_STATIC_PSEUDOCOLOR)
+ fb_set_cmap(&fbi->fb.cmap, info);
+ pxafb_schedule_work(fbi, C_ENABLE);
+ }
+ return 0;
+}
+
+static int pxafb_mmap(struct fb_info *info, struct file *file,
+ struct vm_area_struct *vma)
+{
+ struct pxafb_info *fbi = (struct pxafb_info *)info;
+ unsigned long off = vma->vm_pgoff << PAGE_SHIFT;
+
+ if (off < info->fix.smem_len) {
+ vma->vm_pgoff += 1;
+ return dma_mmap_writecombine(fbi->dev, vma, fbi->map_cpu,
+ fbi->map_dma, fbi->map_size);
+ }
+ return -EINVAL;
+}
+
+static struct fb_ops pxafb_ops = {
+ .owner = THIS_MODULE,
+ .fb_check_var = pxafb_check_var,
+ .fb_set_par = pxafb_set_par,
+ .fb_setcolreg = pxafb_setcolreg,
+ .fb_fillrect = cfb_fillrect,
+ .fb_copyarea = cfb_copyarea,
+ .fb_imageblit = cfb_imageblit,
+ .fb_blank = pxafb_blank,
+ .fb_cursor = soft_cursor,
+ .fb_mmap = pxafb_mmap,
+};
+
+/*
+ * Calculate the PCD value from the clock rate (in picoseconds).
+ * We take account of the PPCR clock setting.
+ * From PXA Developer's Manual:
+ *
+ * PixelClock = LCLK
+ * -------------
+ * 2 ( PCD + 1 )
+ *
+ * PCD = LCLK
+ * ------------- - 1
+ * 2(PixelClock)
+ *
+ * Where:
+ * LCLK = LCD/Memory Clock
+ * PCD = LCCR3[7:0]
+ *
+ * PixelClock here is in Hz while the pixclock argument given is the
+ * period in picoseconds. Hence PixelClock = 1 / ( pixclock * 10^-12 )
+ *
+ * The function get_lclk_frequency_10khz returns LCLK in units of
+ * 10khz. Calling the result of this function lclk gives us the
+ * following
+ *
+ * PCD = (lclk * 10^4 ) * ( pixclock * 10^-12 )
+ * -------------------------------------- - 1
+ * 2
+ *
+ * Factoring the 10^4 and 10^-12 out gives 10^-8 == 1 / 100000000 as used below.
+ */
+static inline unsigned int get_pcd(unsigned int pixclock)
+{
+ unsigned long long pcd;
+
+ /* FIXME: Need to take into account Double Pixel Clock mode
+ * (DPC) bit? or perhaps set it based on the various clock
+ * speeds */
+
+ pcd = (unsigned long long)get_lcdclk_frequency_10khz() * pixclock;
+ pcd /= 100000000 * 2;
+ /* no need for this, since we should subtract 1 anyway. they cancel */
+ /* pcd += 1; */ /* make up for integer math truncations */
+ return (unsigned int)pcd;
+}
+
+/*
+ * pxafb_activate_var():
+ * Configures LCD Controller based on entries in var parameter. Settings are
+ * only written to the controller if changes were made.
+ */
+static int pxafb_activate_var(struct fb_var_screeninfo *var, struct pxafb_info *fbi)
+{
+ struct pxafb_lcd_reg new_regs;
+ u_long flags;
+ u_int lines_per_panel, pcd = get_pcd(var->pixclock);
+
+ DPRINTK("Configuring PXA LCD\n");
+
+ DPRINTK("var: xres=%d hslen=%d lm=%d rm=%d\n",
+ var->xres, var->hsync_len,
+ var->left_margin, var->right_margin);
+ DPRINTK("var: yres=%d vslen=%d um=%d bm=%d\n",
+ var->yres, var->vsync_len,
+ var->upper_margin, var->lower_margin);
+ DPRINTK("var: pixclock=%d pcd=%d\n", var->pixclock, pcd);
+
+#if DEBUG_VAR
+ if (var->xres < 16 || var->xres > 1024)
+ printk(KERN_ERR "%s: invalid xres %d\n",
+ fbi->fb.fix.id, var->xres);
+ switch(var->bits_per_pixel) {
+ case 1:
+ case 2:
+ case 4:
+ case 8:
+ case 16:
+ break;
+ default:
+ printk(KERN_ERR "%s: invalid bit depth %d\n",
+ fbi->fb.fix.id, var->bits_per_pixel);
+ break;
+ }
+ if (var->hsync_len < 1 || var->hsync_len > 64)
+ printk(KERN_ERR "%s: invalid hsync_len %d\n",
+ fbi->fb.fix.id, var->hsync_len);
+ if (var->left_margin < 1 || var->left_margin > 255)
+ printk(KERN_ERR "%s: invalid left_margin %d\n",
+ fbi->fb.fix.id, var->left_margin);
+ if (var->right_margin < 1 || var->right_margin > 255)
+ printk(KERN_ERR "%s: invalid right_margin %d\n",
+ fbi->fb.fix.id, var->right_margin);
+ if (var->yres < 1 || var->yres > 1024)
+ printk(KERN_ERR "%s: invalid yres %d\n",
+ fbi->fb.fix.id, var->yres);
+ if (var->vsync_len < 1 || var->vsync_len > 64)
+ printk(KERN_ERR "%s: invalid vsync_len %d\n",
+ fbi->fb.fix.id, var->vsync_len);
+ if (var->upper_margin < 0 || var->upper_margin > 255)
+ printk(KERN_ERR "%s: invalid upper_margin %d\n",
+ fbi->fb.fix.id, var->upper_margin);
+ if (var->lower_margin < 0 || var->lower_margin > 255)
+ printk(KERN_ERR "%s: invalid lower_margin %d\n",
+ fbi->fb.fix.id, var->lower_margin);
+#endif
+
+ new_regs.lccr0 = fbi->lccr0 |
+ (LCCR0_LDM | LCCR0_SFM | LCCR0_IUM | LCCR0_EFM |
+ LCCR0_QDM | LCCR0_BM | LCCR0_OUM);
+
+ new_regs.lccr1 =
+ LCCR1_DisWdth(var->xres) +
+ LCCR1_HorSnchWdth(var->hsync_len) +
+ LCCR1_BegLnDel(var->left_margin) +
+ LCCR1_EndLnDel(var->right_margin);
+
+ /*
+ * If we have a dual scan LCD, we need to halve
+ * the YRES parameter.
+ */
+ lines_per_panel = var->yres;
+ if ((fbi->lccr0 & LCCR0_SDS) == LCCR0_Dual)
+ lines_per_panel /= 2;
+
+ new_regs.lccr2 =
+ LCCR2_DisHght(lines_per_panel) +
+ LCCR2_VrtSnchWdth(var->vsync_len) +
+ LCCR2_BegFrmDel(var->upper_margin) +
+ LCCR2_EndFrmDel(var->lower_margin);
+
+ new_regs.lccr3 = fbi->lccr3 |
+ pxafb_bpp_to_lccr3(var) |
+ (var->sync & FB_SYNC_HOR_HIGH_ACT ? LCCR3_HorSnchH : LCCR3_HorSnchL) |
+ (var->sync & FB_SYNC_VERT_HIGH_ACT ? LCCR3_VrtSnchH : LCCR3_VrtSnchL);
+
+ if (pcd)
+ new_regs.lccr3 |= LCCR3_PixClkDiv(pcd);
+
+ DPRINTK("nlccr0 = 0x%08x\n", new_regs.lccr0);
+ DPRINTK("nlccr1 = 0x%08x\n", new_regs.lccr1);
+ DPRINTK("nlccr2 = 0x%08x\n", new_regs.lccr2);
+ DPRINTK("nlccr3 = 0x%08x\n", new_regs.lccr3);
+
+ /* Update shadow copy atomically */
+ local_irq_save(flags);
+
+ /* setup dma descriptors */
+ fbi->dmadesc_fblow_cpu = (struct pxafb_dma_descriptor *)((unsigned int)fbi->palette_cpu - 3*16);
+ fbi->dmadesc_fbhigh_cpu = (struct pxafb_dma_descriptor *)((unsigned int)fbi->palette_cpu - 2*16);
+ fbi->dmadesc_palette_cpu = (struct pxafb_dma_descriptor *)((unsigned int)fbi->palette_cpu - 1*16);
+
+ fbi->dmadesc_fblow_dma = fbi->palette_dma - 3*16;
+ fbi->dmadesc_fbhigh_dma = fbi->palette_dma - 2*16;
+ fbi->dmadesc_palette_dma = fbi->palette_dma - 1*16;
+
+#define BYTES_PER_PANEL (lines_per_panel * fbi->fb.fix.line_length)
+
+ /* populate descriptors */
+ fbi->dmadesc_fblow_cpu->fdadr = fbi->dmadesc_fblow_dma;
+ fbi->dmadesc_fblow_cpu->fsadr = fbi->screen_dma + BYTES_PER_PANEL;
+ fbi->dmadesc_fblow_cpu->fidr = 0;
+ fbi->dmadesc_fblow_cpu->ldcmd = BYTES_PER_PANEL;
+
+ fbi->fdadr1 = fbi->dmadesc_fblow_dma; /* only used in dual-panel mode */
+
+ fbi->dmadesc_fbhigh_cpu->fsadr = fbi->screen_dma;
+ fbi->dmadesc_fbhigh_cpu->fidr = 0;
+ fbi->dmadesc_fbhigh_cpu->ldcmd = BYTES_PER_PANEL;
+
+ fbi->dmadesc_palette_cpu->fsadr = fbi->palette_dma;
+ fbi->dmadesc_palette_cpu->fidr = 0;
+ fbi->dmadesc_palette_cpu->ldcmd = (fbi->palette_size * 2) | LDCMD_PAL;
+
+ if (var->bits_per_pixel == 16) {
+ /* palette shouldn't be loaded in true-color mode */
+ fbi->dmadesc_fbhigh_cpu->fdadr = fbi->dmadesc_fbhigh_dma;
+ fbi->fdadr0 = fbi->dmadesc_fbhigh_dma; /* no pal just fbhigh */
+ /* init it to something, even though we won't be using it */
+ fbi->dmadesc_palette_cpu->fdadr = fbi->dmadesc_palette_dma;
+ } else {
+ fbi->dmadesc_palette_cpu->fdadr = fbi->dmadesc_fbhigh_dma;
+ fbi->dmadesc_fbhigh_cpu->fdadr = fbi->dmadesc_palette_dma;
+ fbi->fdadr0 = fbi->dmadesc_palette_dma; /* flips back and forth between pal and fbhigh */
+ }
+
+#if 0
+ DPRINTK("fbi->dmadesc_fblow_cpu = 0x%p\n", fbi->dmadesc_fblow_cpu);
+ DPRINTK("fbi->dmadesc_fbhigh_cpu = 0x%p\n", fbi->dmadesc_fbhigh_cpu);
+ DPRINTK("fbi->dmadesc_palette_cpu = 0x%p\n", fbi->dmadesc_palette_cpu);
+ DPRINTK("fbi->dmadesc_fblow_dma = 0x%x\n", fbi->dmadesc_fblow_dma);
+ DPRINTK("fbi->dmadesc_fbhigh_dma = 0x%x\n", fbi->dmadesc_fbhigh_dma);
+ DPRINTK("fbi->dmadesc_palette_dma = 0x%x\n", fbi->dmadesc_palette_dma);
+
+ DPRINTK("fbi->dmadesc_fblow_cpu->fdadr = 0x%x\n", fbi->dmadesc_fblow_cpu->fdadr);
+ DPRINTK("fbi->dmadesc_fbhigh_cpu->fdadr = 0x%x\n", fbi->dmadesc_fbhigh_cpu->fdadr);
+ DPRINTK("fbi->dmadesc_palette_cpu->fdadr = 0x%x\n", fbi->dmadesc_palette_cpu->fdadr);
+
+ DPRINTK("fbi->dmadesc_fblow_cpu->fsadr = 0x%x\n", fbi->dmadesc_fblow_cpu->fsadr);
+ DPRINTK("fbi->dmadesc_fbhigh_cpu->fsadr = 0x%x\n", fbi->dmadesc_fbhigh_cpu->fsadr);
+ DPRINTK("fbi->dmadesc_palette_cpu->fsadr = 0x%x\n", fbi->dmadesc_palette_cpu->fsadr);
+
+ DPRINTK("fbi->dmadesc_fblow_cpu->ldcmd = 0x%x\n", fbi->dmadesc_fblow_cpu->ldcmd);
+ DPRINTK("fbi->dmadesc_fbhigh_cpu->ldcmd = 0x%x\n", fbi->dmadesc_fbhigh_cpu->ldcmd);
+ DPRINTK("fbi->dmadesc_palette_cpu->ldcmd = 0x%x\n", fbi->dmadesc_palette_cpu->ldcmd);
+#endif
+
+ fbi->reg_lccr0 = new_regs.lccr0;
+ fbi->reg_lccr1 = new_regs.lccr1;
+ fbi->reg_lccr2 = new_regs.lccr2;
+ fbi->reg_lccr3 = new_regs.lccr3;
+ local_irq_restore(flags);
+
+ /*
+ * Only update the registers if the controller is enabled
+ * and something has changed.
+ */
+ if ((LCCR0 != fbi->reg_lccr0) || (LCCR1 != fbi->reg_lccr1) ||
+ (LCCR2 != fbi->reg_lccr2) || (LCCR3 != fbi->reg_lccr3) ||
+ (FDADR0 != fbi->fdadr0) || (FDADR1 != fbi->fdadr1))
+ pxafb_schedule_work(fbi, C_REENABLE);
+
+ return 0;
+}
+
+/*
+ * NOTE! The following functions are purely helpers for set_ctrlr_state.
+ * Do not call them directly; set_ctrlr_state does the correct serialisation
+ * to ensure that things happen in the right way 100% of time time.
+ * -- rmk
+ */
+static inline void __pxafb_backlight_power(struct pxafb_info *fbi, int on)
+{
+ DPRINTK("backlight o%s\n", on ? "n" : "ff");
+
+ if (pxafb_backlight_power)
+ pxafb_backlight_power(on);
+}
+
+static inline void __pxafb_lcd_power(struct pxafb_info *fbi, int on)
+{
+ DPRINTK("LCD power o%s\n", on ? "n" : "ff");
+
+ if (pxafb_lcd_power)
+ pxafb_lcd_power(on);
+}
+
+static void pxafb_setup_gpio(struct pxafb_info *fbi)
+{
+ int gpio, ldd_bits;
+ unsigned int lccr0 = fbi->lccr0;
+
+ /*
+ * setup is based on type of panel supported
+ */
+
+ /* 4 bit interface */
+ if ((lccr0 & LCCR0_CMS) == LCCR0_Mono &&
+ (lccr0 & LCCR0_SDS) == LCCR0_Sngl &&
+ (lccr0 & LCCR0_DPD) == LCCR0_4PixMono)
+ ldd_bits = 4;
+
+ /* 8 bit interface */
+ else if (((lccr0 & LCCR0_CMS) == LCCR0_Mono &&
+ ((lccr0 & LCCR0_SDS) == LCCR0_Dual || (lccr0 & LCCR0_DPD) == LCCR0_8PixMono)) ||
+ ((lccr0 & LCCR0_CMS) == LCCR0_Color &&
+ (lccr0 & LCCR0_PAS) == LCCR0_Pas && (lccr0 & LCCR0_SDS) == LCCR0_Sngl))
+ ldd_bits = 8;
+
+ /* 16 bit interface */
+ else if ((lccr0 & LCCR0_CMS) == LCCR0_Color &&
+ ((lccr0 & LCCR0_SDS) == LCCR0_Dual || (lccr0 & LCCR0_PAS) == LCCR0_Act))
+ ldd_bits = 16;
+
+ else {
+ printk(KERN_ERR "pxafb_setup_gpio: unable to determine bits per pixel\n");
+ return;
+ }
+
+ for (gpio = 58; ldd_bits; gpio++, ldd_bits--)
+ pxa_gpio_mode(gpio | GPIO_ALT_FN_2_OUT);
+ pxa_gpio_mode(GPIO74_LCD_FCLK_MD);
+ pxa_gpio_mode(GPIO75_LCD_LCLK_MD);
+ pxa_gpio_mode(GPIO76_LCD_PCLK_MD);
+ pxa_gpio_mode(GPIO77_LCD_ACBIAS_MD);
+}
+
+static void pxafb_enable_controller(struct pxafb_info *fbi)
+{
+ DPRINTK("Enabling LCD controller\n");
+ DPRINTK("fdadr0 0x%08x\n", (unsigned int) fbi->fdadr0);
+ DPRINTK("fdadr1 0x%08x\n", (unsigned int) fbi->fdadr1);
+ DPRINTK("reg_lccr0 0x%08x\n", (unsigned int) fbi->reg_lccr0);
+ DPRINTK("reg_lccr1 0x%08x\n", (unsigned int) fbi->reg_lccr1);
+ DPRINTK("reg_lccr2 0x%08x\n", (unsigned int) fbi->reg_lccr2);
+ DPRINTK("reg_lccr3 0x%08x\n", (unsigned int) fbi->reg_lccr3);
+
+ /* Sequence from 11.7.10 */
+ LCCR3 = fbi->reg_lccr3;
+ LCCR2 = fbi->reg_lccr2;
+ LCCR1 = fbi->reg_lccr1;
+ LCCR0 = fbi->reg_lccr0 & ~LCCR0_ENB;
+
+ FDADR0 = fbi->fdadr0;
+ FDADR1 = fbi->fdadr1;
+ LCCR0 |= LCCR0_ENB;
+
+ DPRINTK("FDADR0 0x%08x\n", (unsigned int) FDADR0);
+ DPRINTK("FDADR1 0x%08x\n", (unsigned int) FDADR1);
+ DPRINTK("LCCR0 0x%08x\n", (unsigned int) LCCR0);
+ DPRINTK("LCCR1 0x%08x\n", (unsigned int) LCCR1);
+ DPRINTK("LCCR2 0x%08x\n", (unsigned int) LCCR2);
+ DPRINTK("LCCR3 0x%08x\n", (unsigned int) LCCR3);
+}
+
+static void pxafb_disable_controller(struct pxafb_info *fbi)
+{
+ DECLARE_WAITQUEUE(wait, current);
+
+ DPRINTK("Disabling LCD controller\n");
+
+ set_current_state(TASK_UNINTERRUPTIBLE);
+ add_wait_queue(&fbi->ctrlr_wait, &wait);
+
+ LCSR = 0xffffffff; /* Clear LCD Status Register */
+ LCCR0 &= ~LCCR0_LDM; /* Enable LCD Disable Done Interrupt */
+ LCCR0 |= LCCR0_DIS; /* Disable LCD Controller */
+
+ schedule_timeout(20 * HZ / 1000);
+ remove_wait_queue(&fbi->ctrlr_wait, &wait);
+}
+
+/*
+ * pxafb_handle_irq: Handle 'LCD DONE' interrupts.
+ */
+static irqreturn_t pxafb_handle_irq(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct pxafb_info *fbi = dev_id;
+ unsigned int lcsr = LCSR;
+
+ if (lcsr & LCSR_LDD) {
+ LCCR0 |= LCCR0_LDM;
+ wake_up(&fbi->ctrlr_wait);
+ }
+
+ LCSR = lcsr;
+ return IRQ_HANDLED;
+}
+
+/*
+ * This function must be called from task context only, since it will
+ * sleep when disabling the LCD controller, or if we get two contending
+ * processes trying to alter state.
+ */
+static void set_ctrlr_state(struct pxafb_info *fbi, u_int state)
+{
+ u_int old_state;
+
+ down(&fbi->ctrlr_sem);
+
+ old_state = fbi->state;
+
+ /*
+ * Hack around fbcon initialisation.
+ */
+ if (old_state == C_STARTUP && state == C_REENABLE)
+ state = C_ENABLE;
+
+ switch (state) {
+ case C_DISABLE_CLKCHANGE:
+ /*
+ * Disable controller for clock change. If the
+ * controller is already disabled, then do nothing.
+ */
+ if (old_state != C_DISABLE && old_state != C_DISABLE_PM) {
+ fbi->state = state;
+ //TODO __pxafb_lcd_power(fbi, 0);
+ pxafb_disable_controller(fbi);
+ }
+ break;
+
+ case C_DISABLE_PM:
+ case C_DISABLE:
+ /*
+ * Disable controller
+ */
+ if (old_state != C_DISABLE) {
+ fbi->state = state;
+ __pxafb_backlight_power(fbi, 0);
+ __pxafb_lcd_power(fbi, 0);
+ if (old_state != C_DISABLE_CLKCHANGE)
+ pxafb_disable_controller(fbi);
+ }
+ break;
+
+ case C_ENABLE_CLKCHANGE:
+ /*
+ * Enable the controller after clock change. Only
+ * do this if we were disabled for the clock change.
+ */
+ if (old_state == C_DISABLE_CLKCHANGE) {
+ fbi->state = C_ENABLE;
+ pxafb_enable_controller(fbi);
+ //TODO __pxafb_lcd_power(fbi, 1);
+ }
+ break;
+
+ case C_REENABLE:
+ /*
+ * Re-enable the controller only if it was already
+ * enabled. This is so we reprogram the control
+ * registers.
+ */
+ if (old_state == C_ENABLE) {
+ pxafb_disable_controller(fbi);
+ pxafb_setup_gpio(fbi);
+ pxafb_enable_controller(fbi);
+ }
+ break;
+
+ case C_ENABLE_PM:
+ /*
+ * Re-enable the controller after PM. This is not
+ * perfect - think about the case where we were doing
+ * a clock change, and we suspended half-way through.
+ */
+ if (old_state != C_DISABLE_PM)
+ break;
+ /* fall through */
+
+ case C_ENABLE:
+ /*
+ * Power up the LCD screen, enable controller, and
+ * turn on the backlight.
+ */
+ if (old_state != C_ENABLE) {
+ fbi->state = C_ENABLE;
+ pxafb_setup_gpio(fbi);
+ pxafb_enable_controller(fbi);
+ __pxafb_lcd_power(fbi, 1);
+ __pxafb_backlight_power(fbi, 1);
+ }
+ break;
+ }
+ up(&fbi->ctrlr_sem);
+}
+
+/*
+ * Our LCD controller task (which is called when we blank or unblank)
+ * via keventd.
+ */
+static void pxafb_task(void *dummy)
+{
+ struct pxafb_info *fbi = dummy;
+ u_int state = xchg(&fbi->task_state, -1);
+
+ set_ctrlr_state(fbi, state);
+}
+
+#ifdef CONFIG_CPU_FREQ
+/*
+ * CPU clock speed change handler. We need to adjust the LCD timing
+ * parameters when the CPU clock is adjusted by the power management
+ * subsystem.
+ *
+ * TODO: Determine why f->new != 10*get_lclk_frequency_10khz()
+ */
+static int
+pxafb_freq_transition(struct notifier_block *nb, unsigned long val, void *data)
+{
+ struct pxafb_info *fbi = TO_INF(nb, freq_transition);
+ //TODO struct cpufreq_freqs *f = data;
+ u_int pcd;
+
+ switch (val) {
+ case CPUFREQ_PRECHANGE:
+ set_ctrlr_state(fbi, C_DISABLE_CLKCHANGE);
+ break;
+
+ case CPUFREQ_POSTCHANGE:
+ pcd = get_pcd(fbi->fb.var.pixclock);
+ fbi->reg_lccr3 = (fbi->reg_lccr3 & ~0xff) | LCCR3_PixClkDiv(pcd);
+ set_ctrlr_state(fbi, C_ENABLE_CLKCHANGE);
+ break;
+ }
+ return 0;
+}
+
+static int
+pxafb_freq_policy(struct notifier_block *nb, unsigned long val, void *data)
+{
+ struct pxafb_info *fbi = TO_INF(nb, freq_policy);
+ struct fb_var_screeninfo *var = &fbi->fb.var;
+ struct cpufreq_policy *policy = data;
+
+ switch (val) {
+ case CPUFREQ_ADJUST:
+ case CPUFREQ_INCOMPATIBLE:
+ printk(KERN_DEBUG "min dma period: %d ps, "
+ "new clock %d kHz\n", pxafb_display_dma_period(var),
+ policy->max);
+ // TODO: fill in min/max values
+ break;
+#if 0
+ case CPUFREQ_NOTIFY:
+ printk(KERN_ERR "%s: got CPUFREQ_NOTIFY\n", __FUNCTION__);
+ do {} while(0);
+ /* todo: panic if min/max values aren't fulfilled
+ * [can't really happen unless there's a bug in the
+ * CPU policy verification process *
+ */
+ break;
+#endif
+ }
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_PM
+/*
+ * Power management hooks. Note that we won't be called from IRQ context,
+ * unlike the blank functions above, so we may sleep.
+ */
+static int pxafb_suspend(struct device *dev, u32 state, u32 level)
+{
+ struct pxafb_info *fbi = dev_get_drvdata(dev);
+
+ if (level == SUSPEND_DISABLE || level == SUSPEND_POWER_DOWN)
+ set_ctrlr_state(fbi, C_DISABLE_PM);
+ return 0;
+}
+
+static int pxafb_resume(struct device *dev, u32 level)
+{
+ struct pxafb_info *fbi = dev_get_drvdata(dev);
+
+ if (level == RESUME_ENABLE)
+ set_ctrlr_state(fbi, C_ENABLE_PM);
+ return 0;
+}
+#else
+#define pxafb_suspend NULL
+#define pxafb_resume NULL
+#endif
+
+/*
+ * pxafb_map_video_memory():
+ * Allocates the DRAM memory for the frame buffer. This buffer is
+ * remapped into a non-cached, non-buffered, memory region to
+ * allow palette and pixel writes to occur without flushing the
+ * cache. Once this area is remapped, all virtual memory
+ * access to the video memory should occur at the new region.
+ */
+static int __init pxafb_map_video_memory(struct pxafb_info *fbi)
+{
+ u_long palette_mem_size;
+
+ /*
+ * We reserve one page for the palette, plus the size
+ * of the framebuffer.
+ */
+ fbi->map_size = PAGE_ALIGN(fbi->fb.fix.smem_len + PAGE_SIZE);
+ fbi->map_cpu = dma_alloc_writecombine(fbi->dev, fbi->map_size,
+ &fbi->map_dma, GFP_KERNEL);
+
+ if (fbi->map_cpu) {
+ /* prevent initial garbage on screen */
+ memset(fbi->map_cpu, 0, fbi->map_size);
+ fbi->fb.screen_base = fbi->map_cpu + PAGE_SIZE;
+ fbi->screen_dma = fbi->map_dma + PAGE_SIZE;
+ /*
+ * FIXME: this is actually the wrong thing to place in
+ * smem_start. But fbdev suffers from the problem that
+ * it needs an API which doesn't exist (in this case,
+ * dma_writecombine_mmap)
+ */
+ fbi->fb.fix.smem_start = fbi->screen_dma;
+
+ fbi->palette_size = fbi->fb.var.bits_per_pixel == 8 ? 256 : 16;
+
+ palette_mem_size = fbi->palette_size * sizeof(u16);
+ DPRINTK("palette_mem_size = 0x%08lx\n", (u_long) palette_mem_size);
+
+ fbi->palette_cpu = (u16 *)(fbi->map_cpu + PAGE_SIZE - palette_mem_size);
+ fbi->palette_dma = fbi->map_dma + PAGE_SIZE - palette_mem_size;
+ }
+
+ return fbi->map_cpu ? 0 : -ENOMEM;
+}
+
+static struct pxafb_info * __init pxafb_init_fbinfo(struct device *dev)
+{
+ struct pxafb_info *fbi;
+ void *addr;
+ struct pxafb_mach_info *inf = dev->platform_data;
+
+ /* Alloc the pxafb_info and pseudo_palette in one step */
+ fbi = kmalloc(sizeof(struct pxafb_info) + sizeof(u32) * 16, GFP_KERNEL);
+ if (!fbi)
+ return NULL;
+
+ memset(fbi, 0, sizeof(struct pxafb_info));
+ fbi->dev = dev;
+
+ strcpy(fbi->fb.fix.id, PXA_NAME);
+
+ fbi->fb.fix.type = FB_TYPE_PACKED_PIXELS;
+ fbi->fb.fix.type_aux = 0;
+ fbi->fb.fix.xpanstep = 0;
+ fbi->fb.fix.ypanstep = 0;
+ fbi->fb.fix.ywrapstep = 0;
+ fbi->fb.fix.accel = FB_ACCEL_NONE;
+
+ fbi->fb.var.nonstd = 0;
+ fbi->fb.var.activate = FB_ACTIVATE_NOW;
+ fbi->fb.var.height = -1;
+ fbi->fb.var.width = -1;
+ fbi->fb.var.accel_flags = 0;
+ fbi->fb.var.vmode = FB_VMODE_NONINTERLACED;
+
+ fbi->fb.fbops = &pxafb_ops;
+ fbi->fb.flags = FBINFO_DEFAULT;
+ fbi->fb.node = -1;
+
+ addr = fbi;
+ addr = addr + sizeof(struct pxafb_info);
+ fbi->fb.pseudo_palette = addr;
+
+ fbi->max_xres = inf->xres;
+ fbi->fb.var.xres = inf->xres;
+ fbi->fb.var.xres_virtual = inf->xres;
+ fbi->max_yres = inf->yres;
+ fbi->fb.var.yres = inf->yres;
+ fbi->fb.var.yres_virtual = inf->yres;
+ fbi->max_bpp = inf->bpp;
+ fbi->fb.var.bits_per_pixel = inf->bpp;
+ fbi->fb.var.pixclock = inf->pixclock;
+ fbi->fb.var.hsync_len = inf->hsync_len;
+ fbi->fb.var.left_margin = inf->left_margin;
+ fbi->fb.var.right_margin = inf->right_margin;
+ fbi->fb.var.vsync_len = inf->vsync_len;
+ fbi->fb.var.upper_margin = inf->upper_margin;
+ fbi->fb.var.lower_margin = inf->lower_margin;
+ fbi->fb.var.sync = inf->sync;
+ fbi->fb.var.grayscale = inf->cmap_greyscale;
+ fbi->cmap_inverse = inf->cmap_inverse;
+ fbi->cmap_static = inf->cmap_static;
+ fbi->lccr0 = inf->lccr0;
+ fbi->lccr3 = inf->lccr3;
+ fbi->state = C_STARTUP;
+ fbi->task_state = (u_char)-1;
+ fbi->fb.fix.smem_len = fbi->max_xres * fbi->max_yres *
+ fbi->max_bpp / 8;
+
+ init_waitqueue_head(&fbi->ctrlr_wait);
+ INIT_WORK(&fbi->task, pxafb_task, fbi);
+ init_MUTEX(&fbi->ctrlr_sem);
+
+ return fbi;
+}
+
+#ifdef CONFIG_FB_PXA_PARAMETERS
+static int __init pxafb_parse_options(struct device *dev, char *options)
+{
+ struct pxafb_mach_info *inf = dev->platform_data;
+ char *this_opt;
+
+ if (!options || !*options)
+ return 0;
+
+ dev_dbg(dev, "options are \"%s\"\n", options ? options : "null");
+
+ /* could be made table driven or similar?... */
+ while ((this_opt = strsep(&options, ",")) != NULL) {
+ if (!strncmp(this_opt, "mode:", 5)) {
+ const char *name = this_opt+5;
+ unsigned int namelen = strlen(name);
+ int res_specified = 0, bpp_specified = 0;
+ unsigned int xres = 0, yres = 0, bpp = 0;
+ int yres_specified = 0;
+ int i;
+ for (i = namelen-1; i >= 0; i--) {
+ switch (name[i]) {
+ case '-':
+ namelen = i;
+ if (!bpp_specified && !yres_specified) {
+ bpp = simple_strtoul(&name[i+1], NULL, 0);
+ bpp_specified = 1;
+ } else
+ goto done;
+ break;
+ case 'x':
+ if (!yres_specified) {
+ yres = simple_strtoul(&name[i+1], NULL, 0);
+ yres_specified = 1;
+ } else
+ goto done;
+ break;
+ case '0'...'9':
+ break;
+ default:
+ goto done;
+ }
+ }
+ if (i < 0 && yres_specified) {
+ xres = simple_strtoul(name, NULL, 0);
+ res_specified = 1;
+ }
+ done:
+ if (res_specified) {
+ dev_info(dev, "overriding resolution: %dx%d\n", xres, yres);
+ inf->xres = xres; inf->yres = yres;
+ }
+ if (bpp_specified)
+ switch (bpp) {
+ case 1:
+ case 2:
+ case 4:
+ case 8:
+ case 16:
+ inf->bpp = bpp;
+ dev_info(dev, "overriding bit depth: %d\n", bpp);
+ break;
+ default:
+ dev_err(dev, "Depth %d is not valid\n", bpp);
+ }
+ } else if (!strncmp(this_opt, "pixclock:", 9)) {
+ inf->pixclock = simple_strtoul(this_opt+9, NULL, 0);
+ dev_info(dev, "override pixclock: %ld\n", inf->pixclock);
+ } else if (!strncmp(this_opt, "left:", 5)) {
+ inf->left_margin = simple_strtoul(this_opt+5, NULL, 0);
+ dev_info(dev, "override left: %u\n", inf->left_margin);
+ } else if (!strncmp(this_opt, "right:", 6)) {
+ inf->right_margin = simple_strtoul(this_opt+6, NULL, 0);
+ dev_info(dev, "override right: %u\n", inf->right_margin);
+ } else if (!strncmp(this_opt, "upper:", 6)) {
+ inf->upper_margin = simple_strtoul(this_opt+6, NULL, 0);
+ dev_info(dev, "override upper: %u\n", inf->upper_margin);
+ } else if (!strncmp(this_opt, "lower:", 6)) {
+ inf->lower_margin = simple_strtoul(this_opt+6, NULL, 0);
+ dev_info(dev, "override lower: %u\n", inf->lower_margin);
+ } else if (!strncmp(this_opt, "hsynclen:", 9)) {
+ inf->hsync_len = simple_strtoul(this_opt+9, NULL, 0);
+ dev_info(dev, "override hsynclen: %u\n", inf->hsync_len);
+ } else if (!strncmp(this_opt, "vsynclen:", 9)) {
+ inf->vsync_len = simple_strtoul(this_opt+9, NULL, 0);
+ dev_info(dev, "override vsynclen: %u\n", inf->vsync_len);
+ } else if (!strncmp(this_opt, "hsync:", 6)) {
+ if (simple_strtoul(this_opt+6, NULL, 0) == 0) {
+ dev_info(dev, "override hsync: Active Low\n");
+ inf->sync &= ~FB_SYNC_HOR_HIGH_ACT;
+ } else {
+ dev_info(dev, "override hsync: Active High\n");
+ inf->sync |= FB_SYNC_HOR_HIGH_ACT;
+ }
+ } else if (!strncmp(this_opt, "vsync:", 6)) {
+ if (simple_strtoul(this_opt+6, NULL, 0) == 0) {
+ dev_info(dev, "override vsync: Active Low\n");
+ inf->sync &= ~FB_SYNC_VERT_HIGH_ACT;
+ } else {
+ dev_info(dev, "override vsync: Active High\n");
+ inf->sync |= FB_SYNC_VERT_HIGH_ACT;
+ }
+ } else if (!strncmp(this_opt, "dpc:", 4)) {
+ if (simple_strtoul(this_opt+4, NULL, 0) == 0) {
+ dev_info(dev, "override double pixel clock: false\n");
+ inf->lccr3 &= ~LCCR3_DPC;
+ } else {
+ dev_info(dev, "override double pixel clock: true\n");
+ inf->lccr3 |= LCCR3_DPC;
+ }
+ } else if (!strncmp(this_opt, "outputen:", 9)) {
+ if (simple_strtoul(this_opt+9, NULL, 0) == 0) {
+ dev_info(dev, "override output enable: active low\n");
+ inf->lccr3 = (inf->lccr3 & ~LCCR3_OEP) | LCCR3_OutEnL;
+ } else {
+ dev_info(dev, "override output enable: active high\n");
+ inf->lccr3 = (inf->lccr3 & ~LCCR3_OEP) | LCCR3_OutEnH;
+ }
+ } else if (!strncmp(this_opt, "pixclockpol:", 12)) {
+ if (simple_strtoul(this_opt+12, NULL, 0) == 0) {
+ dev_info(dev, "override pixel clock polarity: falling edge\n");
+ inf->lccr3 = (inf->lccr3 & ~LCCR3_PCP) | LCCR3_PixFlEdg;
+ } else {
+ dev_info(dev, "override pixel clock polarity: rising edge\n");
+ inf->lccr3 = (inf->lccr3 & ~LCCR3_PCP) | LCCR3_PixRsEdg;
+ }
+ } else if (!strncmp(this_opt, "color", 5)) {
+ inf->lccr0 = (inf->lccr0 & ~LCCR0_CMS) | LCCR0_Color;
+ } else if (!strncmp(this_opt, "mono", 4)) {
+ inf->lccr0 = (inf->lccr0 & ~LCCR0_CMS) | LCCR0_Mono;
+ } else if (!strncmp(this_opt, "active", 6)) {
+ inf->lccr0 = (inf->lccr0 & ~LCCR0_PAS) | LCCR0_Act;
+ } else if (!strncmp(this_opt, "passive", 7)) {
+ inf->lccr0 = (inf->lccr0 & ~LCCR0_PAS) | LCCR0_Pas;
+ } else if (!strncmp(this_opt, "single", 6)) {
+ inf->lccr0 = (inf->lccr0 & ~LCCR0_SDS) | LCCR0_Sngl;
+ } else if (!strncmp(this_opt, "dual", 4)) {
+ inf->lccr0 = (inf->lccr0 & ~LCCR0_SDS) | LCCR0_Dual;
+ } else if (!strncmp(this_opt, "4pix", 4)) {
+ inf->lccr0 = (inf->lccr0 & ~LCCR0_DPD) | LCCR0_4PixMono;
+ } else if (!strncmp(this_opt, "8pix", 4)) {
+ inf->lccr0 = (inf->lccr0 & ~LCCR0_DPD) | LCCR0_8PixMono;
+ } else {
+ dev_err(dev, "unknown option: %s\n", this_opt);
+ return -EINVAL;
+ }
+ }
+ return 0;
+
+}
+#endif
+
+int __init pxafb_probe(struct device *dev)
+{
+ struct pxafb_info *fbi;
+ struct pxafb_mach_info *inf;
+ int ret;
+
+ dev_dbg(dev, "pxafb_probe\n");
+
+ inf = dev->platform_data;
+ ret = -ENOMEM;
+ fbi = NULL;
+ if (!inf)
+ goto failed;
+
+#ifdef CONFIG_FB_PXA_PARAMETERS
+ ret = pxafb_parse_options(dev, g_options);
+ if (ret < 0)
+ goto failed;
+#endif
+
+#ifdef DEBUG_VAR
+ /* Check for various illegal bit-combinations. Currently only
+ * a warning is given. */
+
+ if (inf->lccr0 & LCCR0_INVALID_CONFIG_MASK)
+ dev_warn(dev, "machine LCCR0 setting contains illegal bits: %08x\n",
+ inf->lccr0 & LCCR0_INVALID_CONFIG_MASK);
+ if (inf->lccr3 & LCCR3_INVALID_CONFIG_MASK)
+ dev_warn(dev, "machine LCCR3 setting contains illegal bits: %08x\n",
+ inf->lccr3 & LCCR3_INVALID_CONFIG_MASK);
+ if (inf->lccr0 & LCCR0_DPD &&
+ ((inf->lccr0 & LCCR0_PAS) != LCCR0_Pas ||
+ (inf->lccr0 & LCCR0_SDS) != LCCR0_Sngl ||
+ (inf->lccr0 & LCCR0_CMS) != LCCR0_Mono))
+ dev_warn(dev, "Double Pixel Data (DPD) mode is only valid in passive mono"
+ " single panel mode\n");
+ if ((inf->lccr0 & LCCR0_PAS) == LCCR0_Act &&
+ (inf->lccr0 & LCCR0_SDS) == LCCR0_Dual)
+ dev_warn(dev, "Dual panel only valid in passive mode\n");
+ if ((inf->lccr0 & LCCR0_PAS) == LCCR0_Pas &&
+ (inf->upper_margin || inf->lower_margin))
+ dev_warn(dev, "Upper and lower margins must be 0 in passive mode\n");
+#endif
+
+ dev_dbg(dev, "got a %dx%dx%d LCD\n",inf->xres, inf->yres, inf->bpp);
+ if (inf->xres == 0 || inf->yres == 0 || inf->bpp == 0) {
+ dev_err(dev, "Invalid resolution or bit depth\n");
+ ret = -EINVAL;
+ goto failed;
+ }
+ pxafb_backlight_power = inf->pxafb_backlight_power;
+ pxafb_lcd_power = inf->pxafb_lcd_power;
+ fbi = pxafb_init_fbinfo(dev);
+ if (!fbi) {
+ dev_err(dev, "Failed to initialize framebuffer device\n");
+ ret = -ENOMEM; // only reason for pxafb_init_fbinfo to fail is kmalloc
+ goto failed;
+ }
+
+ /* Initialize video memory */
+ ret = pxafb_map_video_memory(fbi);
+ if (ret) {
+ dev_err(dev, "Failed to allocate video RAM: %d\n", ret);
+ ret = -ENOMEM;
+ goto failed;
+ }
+ /* enable LCD controller clock */
+ pxa_set_cken(CKEN16_LCD, 1);
+
+ ret = request_irq(IRQ_LCD, pxafb_handle_irq, SA_INTERRUPT, "LCD", fbi);
+ if (ret) {
+ dev_err(dev, "request_irq failed: %d\n", ret);
+ ret = -EBUSY;
+ goto failed;
+ }
+
+ /*
+ * This makes sure that our colour bitfield
+ * descriptors are correctly initialised.
+ */
+ pxafb_check_var(&fbi->fb.var, &fbi->fb);
+ pxafb_set_par(&fbi->fb);
+
+ dev_set_drvdata(dev, fbi);
+
+ ret = register_framebuffer(&fbi->fb);
+ if (ret < 0) {
+ dev_err(dev, "Failed to register framebuffer device: %d\n", ret);
+ goto failed;
+ }
+
+#ifdef CONFIG_PM
+ // TODO
+#endif
+
+#ifdef CONFIG_CPU_FREQ
+ fbi->freq_transition.notifier_call = pxafb_freq_transition;
+ fbi->freq_policy.notifier_call = pxafb_freq_policy;
+ cpufreq_register_notifier(&fbi->freq_transition, CPUFREQ_TRANSITION_NOTIFIER);
+ cpufreq_register_notifier(&fbi->freq_policy, CPUFREQ_POLICY_NOTIFIER);
+#endif
+
+ /*
+ * Ok, now enable the LCD controller
+ */
+ set_ctrlr_state(fbi, C_ENABLE);
+
+ return 0;
+
+failed:
+ dev_set_drvdata(dev, NULL);
+ kfree(fbi);
+ return ret;
+}
+
+static struct device_driver pxafb_driver = {
+ .name = "pxa2xx-fb",
+ .bus = &platform_bus_type,
+ .probe = pxafb_probe,
+#ifdef CONFIG_PM
+ .suspend = pxafb_suspend,
+ .resume = pxafb_resume,
+#endif
+};
+
+#ifndef MODULE
+int __devinit pxafb_setup(char *options)
+{
+# ifdef CONFIG_FB_PXA_PARAMETERS
+ strlcpy(g_options, options, sizeof(g_options));
+# endif
+ return 0;
+}
+#else
+# ifdef CONFIG_FB_PXA_PARAMETERS
+module_param_string(options, g_options, sizeof(g_options), 0);
+MODULE_PARM_DESC(options, "LCD parameters (see Documentation/fb/pxafb.txt)");
+# endif
+#endif
+
+int __devinit pxafb_init(void)
+{
+#ifndef MODULE
+ char *option = NULL;
+
+ if (fb_get_options("pxafb", &option))
+ return -ENODEV;
+ pxafb_setup(option);
+#endif
+ return driver_register(&pxafb_driver);
+}
+
+module_init(pxafb_init);
+
+MODULE_DESCRIPTION("loadable framebuffer driver for PXA");
+MODULE_LICENSE("GPL");