Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
diff --git a/drivers/video/sis/initdef.h b/drivers/video/sis/initdef.h
new file mode 100644
index 0000000..55a82d6
--- /dev/null
+++ b/drivers/video/sis/initdef.h
@@ -0,0 +1,671 @@
+/* $XFree86$ */
+/* $XdotOrg$ */
+/*
+ * Global definitions for init.c and init301.c
+ *
+ * Copyright (C) 2001-2004 by Thomas Winischhofer, Vienna, Austria
+ *
+ * If distributed as part of the Linux kernel, the following license terms
+ * apply:
+ *
+ * * This program is free software; you can redistribute it and/or modify
+ * * it under the terms of the GNU General Public License as published by
+ * * the Free Software Foundation; either version 2 of the named License,
+ * * or any later version.
+ * *
+ * * This program is distributed in the hope that it will be useful,
+ * * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * * GNU General Public License for more details.
+ * *
+ * * You should have received a copy of the GNU General Public License
+ * * along with this program; if not, write to the Free Software
+ * * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA
+ *
+ * Otherwise, the following license terms apply:
+ *
+ * * Redistribution and use in source and binary forms, with or without
+ * * modification, are permitted provided that the following conditions
+ * * are met:
+ * * 1) Redistributions of source code must retain the above copyright
+ * *    notice, this list of conditions and the following disclaimer.
+ * * 2) Redistributions in binary form must reproduce the above copyright
+ * *    notice, this list of conditions and the following disclaimer in the
+ * *    documentation and/or other materials provided with the distribution.
+ * * 3) The name of the author may not be used to endorse or promote products
+ * *    derived from this software without specific prior written permission.
+ * *
+ * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+ * * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * Author: 	Thomas Winischhofer <thomas@winischhofer.net>
+ *
+ */
+
+#ifndef _INITDEF_
+#define _INITDEF_
+
+#define IS_SIS330		(HwInfo->jChipType == SIS_330)
+#define IS_SIS550		(HwInfo->jChipType == SIS_550)
+#define IS_SIS650		(HwInfo->jChipType == SIS_650)  /* All versions, incl 651, M65x */
+#define IS_SIS740		(HwInfo->jChipType == SIS_740)
+#define IS_SIS651	        (SiS_Pr->SiS_SysFlags & (SF_Is651 | SF_Is652))
+#define IS_SISM650	        (SiS_Pr->SiS_SysFlags & (SF_IsM650 | SF_IsM652 | SF_IsM653))
+#define IS_SIS65x               (IS_SIS651 || IS_SISM650)       /* Only special versions of 65x */
+#define IS_SIS661		(HwInfo->jChipType == SIS_661)
+#define IS_SIS741		(HwInfo->jChipType == SIS_741)
+#define IS_SIS660		(HwInfo->jChipType == SIS_660)
+#define IS_SIS760		(HwInfo->jChipType == SIS_760)
+#define IS_SIS661741660760	(IS_SIS661 || IS_SIS741 || IS_SIS660 || IS_SIS760)
+#define IS_SIS650740            ((HwInfo->jChipType >= SIS_650) && (HwInfo->jChipType < SIS_330))
+#define IS_SIS550650740         (IS_SIS550 || IS_SIS650740)
+#define IS_SIS650740660         (IS_SIS650 || IS_SIS740 || IS_SIS661741660760)
+#define IS_SIS550650740660      (IS_SIS550 || IS_SIS650740660)
+
+#define SISGETROMW(x)		(ROMAddr[(x)] | (ROMAddr[(x)+1] << 8))
+
+/* SiS_VBType */
+#define VB_SIS301	      	0x0001
+#define VB_SIS301B        	0x0002
+#define VB_SIS302B        	0x0004
+#define VB_SIS301LV     	0x0008
+#define VB_SIS302LV     	0x0010
+#define VB_SIS302ELV		0x0020
+#define VB_SIS301C              0x0040
+#define VB_UMC			0x4000
+#define VB_NoLCD        	0x8000
+#define VB_SIS301BLV302BLV      (VB_SIS301B|VB_SIS301C|VB_SIS302B|VB_SIS301LV|VB_SIS302LV|VB_SIS302ELV)
+#define VB_SIS301B302B          (VB_SIS301B|VB_SIS301C|VB_SIS302B)
+#define VB_SIS301LV302LV        (VB_SIS301LV|VB_SIS302LV|VB_SIS302ELV)
+#define VB_SISVB		(VB_SIS301 | VB_SIS301BLV302BLV)
+#define VB_SISTMDS		(VB_SIS301 | VB_SIS301B302B)
+#define VB_SISLVDS		VB_SIS301LV302LV
+#define VB_SISLCDA		(VB_SIS302B|VB_SIS301C|VB_SIS301LV|VB_SIS302LV|VB_SIS302ELV)
+#define VB_SISYPBPR		(VB_SIS301C|VB_SIS301LV|VB_SIS302LV|VB_SIS302ELV)
+#define VB_SISHIVISION		(VB_SIS301|VB_SIS301B|VB_SIS302B)
+
+/* VBInfo */
+#define SetSimuScanMode         0x0001   /* CR 30 */
+#define SwitchCRT2              0x0002
+#define SetCRT2ToAVIDEO         0x0004
+#define SetCRT2ToSVIDEO         0x0008
+#define SetCRT2ToSCART          0x0010
+#define SetCRT2ToLCD            0x0020
+#define SetCRT2ToRAMDAC         0x0040
+#define SetCRT2ToHiVision       0x0080   		/* for SiS bridge */
+#define SetCRT2ToCHYPbPr       	SetCRT2ToHiVision	/* for Chrontel   */
+#define SetNTSCTV               0x0000   /* CR 31 */
+#define SetPALTV                0x0100   		/* Deprecated here, now in TVMode */
+#define SetInSlaveMode          0x0200
+#define SetNotSimuMode          0x0400
+#define SetNotSimuTVMode        SetNotSimuMode
+#define SetDispDevSwitch        0x0800
+#define SetCRT2ToYPbPr525750    0x0800
+#define LoadDACFlag             0x1000
+#define DisableCRT2Display      0x2000
+#define DriverMode              0x4000
+#define HotKeySwitch            0x8000
+#define SetCRT2ToLCDA           0x8000
+
+/* v-- Needs change in sis_vga.c if changed (GPIO) --v */
+#define SetCRT2ToTV             (SetCRT2ToYPbPr525750|SetCRT2ToHiVision|SetCRT2ToSCART|SetCRT2ToSVIDEO|SetCRT2ToAVIDEO)
+#define SetCRT2ToTVNoYPbPrHiVision (SetCRT2ToSCART | SetCRT2ToSVIDEO | SetCRT2ToAVIDEO)
+#define SetCRT2ToTVNoHiVision  	(SetCRT2ToYPbPr525750 | SetCRT2ToSCART | SetCRT2ToSVIDEO | SetCRT2ToAVIDEO)
+
+/* SiS_ModeType */
+#define ModeText                0x00
+#define ModeCGA                 0x01
+#define ModeEGA                 0x02
+#define ModeVGA                 0x03
+#define Mode15Bpp               0x04
+#define Mode16Bpp               0x05
+#define Mode24Bpp               0x06
+#define Mode32Bpp               0x07
+
+#define ModeTypeMask            0x07
+#define IsTextMode              0x07
+
+#define DACInfoFlag             0x0018
+#define MemoryInfoFlag          0x01E0
+#define MemorySizeShift         5
+
+/* modeflag */
+#define Charx8Dot               0x0200
+#define LineCompareOff          0x0400
+#define CRT2Mode                0x0800
+#define HalfDCLK                0x1000
+#define NoSupportSimuTV         0x2000
+#define NoSupportLCDScale	0x4000 /* SiS bridge: No scaling possible (no matter what panel) */
+#define DoubleScanMode          0x8000
+
+/* Infoflag */
+#define SupportTV               0x0008
+#define SupportTV1024           0x0800
+#define SupportCHTV 		0x0800
+#define Support64048060Hz       0x0800  /* Special for 640x480 LCD */
+#define SupportHiVision         0x0010
+#define SupportYPbPr750p        0x1000
+#define SupportLCD              0x0020
+#define SupportRAMDAC2          0x0040	/* All           (<= 100Mhz) */
+#define SupportRAMDAC2_135      0x0100  /* All except DH (<= 135Mhz) */
+#define SupportRAMDAC2_162      0x0200  /* B, C          (<= 162Mhz) */
+#define SupportRAMDAC2_202      0x0400  /* C             (<= 202Mhz) */
+#define InterlaceMode           0x0080
+#define SyncPP                  0x0000
+#define SyncPN                  0x4000
+#define SyncNP                  0x8000
+#define SyncNN                  0xc000
+
+/* SetFlag */
+#define ProgrammingCRT2         0x0001
+#define LowModeTests		0x0002
+/* #define TVSimuMode           0x0002 - deprecated */
+/* #define RPLLDIV2XO           0x0004 - deprecated */
+#define LCDVESATiming           0x0008
+#define EnableLVDSDDA           0x0010
+#define SetDispDevSwitchFlag    0x0020
+#define CheckWinDos             0x0040
+#define SetDOSMode              0x0080
+
+/* TVMode flag */
+#define TVSetPAL		0x0001
+#define TVSetNTSCJ		0x0002
+#define TVSetPALM		0x0004
+#define TVSetPALN		0x0008
+#define TVSetCHOverScan		0x0010
+#define TVSetYPbPr525i		0x0020 /* new 0x10 */
+#define TVSetYPbPr525p		0x0040 /* new 0x20 */
+#define TVSetYPbPr750p		0x0080 /* new 0x40 */
+#define TVSetHiVision		0x0100 /* new 0x80; = 1080i, software-wise identical */
+#define TVSetTVSimuMode		0x0200 /* new 0x200, prev. 0x800 */
+#define TVRPLLDIV2XO		0x0400 /* prev 0x1000 */
+#define TVSetNTSC1024		0x0800 /* new 0x100, prev. 0x2000 */
+#define TVAspect43		0x2000
+#define TVAspect169		0x4000
+#define TVAspect43LB		0x8000
+
+/* YPbPr flag (>=315, <661; converted to TVMode) */
+#define YPbPr525p               0x0001
+#define YPbPr750p               0x0002
+#define YPbPr525i               0x0004
+#define YPbPrHiVision           0x0008
+#define YPbPrModeMask           (YPbPr750p | YPbPr525p | YPbPr525i | YPbPrHiVision)
+
+/* SysFlags (to identify special versions) */
+#define SF_Is651                0x0001
+#define SF_IsM650               0x0002
+#define SF_Is652		0x0004
+#define SF_IsM652		0x0008
+#define SF_IsM653		0x0010
+#define SF_IsM661		0x0020
+#define SF_IsM741		0x0040
+#define SF_IsM760		0x0080
+#define SF_760LFB		0x8000  /* 760: We have LFB */
+
+/* CR32 (Newer 630, and 315 series)
+
+   [0]   VB connected with CVBS
+   [1]   VB connected with SVHS
+   [2]   VB connected with SCART
+   [3]   VB connected with LCD
+   [4]   VB connected with CRT2 (secondary VGA)
+   [5]   CRT1 monitor is connected
+   [6]   VB connected with Hi-Vision TV
+   [7]   <= 330: VB connected with DVI combo connector
+         >= 661: VB connected to YPbPr
+*/
+
+/* CR35 (300 series only) */
+#define TVOverScan              0x10
+#define TVOverScanShift         4
+
+/* CR35 (661 series only)
+
+   [0]    1 = PAL, 0 = NTSC
+   [1]    1 = NTSC-J (if D0 = 0)
+   [2]    1 = PALM (if D0 = 1)
+   [3]    1 = PALN (if D0 = 1)
+   [4]    1 = Overscan (Chrontel only)
+   [7:5]  (only if D2 in CR38 is set)
+          000  525i
+ 	  001  525p
+	  010  750p
+	  011  1080i (or HiVision on 301, 301B)
+
+   These bits are being translated to TVMode flag.
+
+*/
+
+/*
+   CR37
+
+   [0]   Set 24/18 bit (0/1) RGB to LVDS/TMDS transmitter (set by BIOS)
+   [3:1] External chip
+         300 series:
+	    001   SiS301 (never seen)
+	    010   LVDS
+	    011   LVDS + Tumpion Zurac
+	    100   LVDS + Chrontel 7005
+	    110   Chrontel 7005
+	  315/330 series
+	    001   SiS30x (never seen)
+	    010   LVDS
+	    011   LVDS + Chrontel 7019
+	  660 series [2:1] only:
+	     reserved (now in CR38)
+	  All other combinations reserved
+   [3]    661 only: Pass 1:1 data
+   [4]    LVDS: 0: Panel Link expands / 1: Panel Link does not expand
+          30x:  0: Bridge scales      / 1: Bridge does not scale = Panel scales (if possible)
+   [5]    LCD polarity select
+          0: VESA DMT Standard
+	  1: EDID 2.x defined
+   [6]    LCD horizontal polarity select
+          0: High active
+	  1: Low active
+   [7]    LCD vertical polarity select
+          0: High active
+	  1: Low active
+*/
+
+/* CR37: LCDInfo */
+#define LCDRGB18Bit           0x0001
+#define LCDNonExpanding       0x0010
+#define LCDSync               0x0020
+#define LCDPass11             0x0100   /* 0: center screen, 1: Pass 1:1 data */
+#define LCDDualLink	      0x0200
+
+#define DontExpandLCD	      LCDNonExpanding
+#define LCDNonExpandingShift       4
+#define DontExpandLCDShift    LCDNonExpandingShift
+#define LCDSyncBit            0x00e0
+#define LCDSyncShift               6
+
+/* CR38 (315 series) */
+#define EnableDualEdge 		0x01
+#define SetToLCDA		0x02   /* LCD channel A (301C/302B/30x(E)LV and 650+LVDS only) */
+#define EnableCHScart           0x04   /* Scart on Ch7019 (unofficial definition - TW) */
+#define EnableCHYPbPr           0x08   /* YPbPr on Ch7019 (480i HDTV); only on 650/Ch7019 systems */
+#define EnableSiSYPbPr          0x08   /* Enable YPbPr mode (30xLV/301C only) */
+#define EnableYPbPr525i         0x00   /* Enable 525i YPbPr mode (30xLV/301C only) (mask 0x30) */
+#define EnableYPbPr525p         0x10   /* Enable 525p YPbPr mode (30xLV/301C only) (mask 0x30) */
+#define EnableYPbPr750p         0x20   /* Enable 750p YPbPr mode (30xLV/301C only) (mask 0x30) */
+#define EnableYPbPr1080i        0x30   /* Enable 1080i YPbPr mode (30xLV/301C only) (mask 0x30) */
+#define EnablePALM              0x40   /* 1 = Set PALM */
+#define EnablePALN              0x80   /* 1 = Set PALN */
+#define EnableNTSCJ             EnablePALM  /* Not BIOS */
+
+/* CR38 (661 and later)
+  D[7:5]  000 No VB
+          001 301 series VB
+	  010 LVDS
+	  011 Chrontel 7019
+	  100 Conexant
+  D2      Enable YPbPr output (see CR35)
+  D[1:0]  LCDA (like before)
+*/
+
+#define EnablePALMN             0x40   /* Romflag: 1 = Allow PALM/PALN */
+
+/* CR39 (650 only) */
+#define LCDPass1_1		0x01   /* 0: center screen, 1: pass 1:1 data output  */
+#define Enable302LV_DualLink    0x04   /* 302LV only; enable dual link */
+
+/* CR39 (661 and later)
+   D[1:0] YPbPr Aspect Ratio
+          00 4:3 letterbox
+	  01 4:3
+	  10 16:9
+	  11 4:3
+*/
+
+/* CR3B (651+301C)
+   D[1:0] YPbPr Aspect Ratio
+          ?
+*/
+
+/* CR79 (315/330 series only; not 661 and later)
+   [3-0] Notify driver
+         0001 Mode Switch event (set by BIOS)
+	 0010 Epansion On/Off event
+	 0011 TV UnderScan/OverScan event
+	 0100 Set Brightness event
+	 0101 Set Contrast event
+	 0110 Set Mute event
+	 0111 Set Volume Up/Down event
+   [4]   Enable Backlight Control by BIOS/driver 
+         (set by driver; set means that the BIOS should
+	 not touch the backlight registers because eg.
+	 the driver already switched off the backlight)
+   [5]   PAL/NTSC (set by BIOS)
+   [6]   Expansion On/Off (set by BIOS; copied to CR32[4])
+   [7]   TV UnderScan/OverScan (set by BIOS)
+*/
+
+/* LCDResInfo */
+#define Panel300_800x600        0x01	/* CR36 */
+#define Panel300_1024x768       0x02
+#define Panel300_1280x1024      0x03
+#define Panel300_1280x960       0x04
+#define Panel300_640x480        0x05
+#define Panel300_1024x600       0x06
+#define Panel300_1152x768       0x07
+#define Panel300_1280x768       0x0a
+#define Panel300_320x480        0x0e 	/* fstn - This is fake, can be any */
+#define Panel300_Custom		0x0f
+#define Panel300_Barco1366      0x10
+
+#define Panel310_800x600        0x01
+#define Panel310_1024x768       0x02
+#define Panel310_1280x1024      0x03
+#define Panel310_640x480        0x04
+#define Panel310_1024x600       0x05
+#define Panel310_1152x864       0x06
+#define Panel310_1280x960       0x07
+#define Panel310_1152x768       0x08	/* LVDS only */
+#define Panel310_1400x1050      0x09
+#define Panel310_1280x768       0x0a
+#define Panel310_1600x1200      0x0b
+#define Panel310_640x480_2      0x0c
+#define Panel310_640x480_3      0x0d
+#define Panel310_320x480        0x0e    /* fstn - TW: This is fake, can be any */
+#define Panel310_Custom		0x0f
+
+#define Panel661_800x600        0x01
+#define Panel661_1024x768       0x02
+#define Panel661_1280x1024      0x03
+#define Panel661_640x480        0x04
+#define Panel661_1024x600       0x05
+#define Panel661_1152x864       0x06
+#define Panel661_1280x960       0x07
+#define Panel661_1152x768       0x08
+#define Panel661_1400x1050      0x09
+#define Panel661_1280x768       0x0a
+#define Panel661_1600x1200      0x0b
+#define Panel661_1280x800       0x0c
+#define Panel661_1680x1050      0x0d
+#define Panel661_1280x720       0x0e
+#define Panel661_Custom		0x0f
+
+#define Panel_800x600           0x01	/* Unified values */
+#define Panel_1024x768          0x02    /* MUST match BIOS values from 0-e */
+#define Panel_1280x1024         0x03
+#define Panel_640x480           0x04
+#define Panel_1024x600          0x05
+#define Panel_1152x864          0x06
+#define Panel_1280x960          0x07
+#define Panel_1152x768          0x08	/* LVDS only */
+#define Panel_1400x1050         0x09
+#define Panel_1280x768          0x0a    /* 30xB/C and LVDS only (BIOS: all) */
+#define Panel_1600x1200         0x0b
+#define Panel_1280x800		0x0c    /* 661etc (TMDS) */
+#define Panel_1680x1050         0x0d    /* 661etc  */
+#define Panel_1280x720		0x0e    /* 661etc  */
+#define Panel_Custom		0x0f	/* MUST BE 0x0f (for DVI DDC detection) */
+#define Panel_320x480           0x10    /* SiS 550 fstn - TW: This is fake, can be any */
+#define Panel_Barco1366         0x11
+#define Panel_848x480		0x12
+#define Panel_640x480_2		0x13    /* SiS 550 */
+#define Panel_640x480_3		0x14    /* SiS 550 */
+#define Panel_1280x768_2        0x15	/* 30xLV */
+#define Panel_1280x768_3        0x16    /* (unused) */
+#define Panel_1280x800_2	0x17    /* 30xLV */
+
+/* Index in ModeResInfo table */
+#define SIS_RI_320x200    0
+#define SIS_RI_320x240    1
+#define SIS_RI_320x400    2
+#define SIS_RI_400x300    3
+#define SIS_RI_512x384    4
+#define SIS_RI_640x400    5
+#define SIS_RI_640x480    6
+#define SIS_RI_800x600    7
+#define SIS_RI_1024x768   8
+#define SIS_RI_1280x1024  9
+#define SIS_RI_1600x1200 10
+#define SIS_RI_1920x1440 11
+#define SIS_RI_2048x1536 12
+#define SIS_RI_720x480   13
+#define SIS_RI_720x576   14
+#define SIS_RI_1280x960  15
+#define SIS_RI_800x480   16
+#define SIS_RI_1024x576  17
+#define SIS_RI_1280x720  18
+#define SIS_RI_856x480   19
+#define SIS_RI_1280x768  20
+#define SIS_RI_1400x1050 21
+#define SIS_RI_1152x864  22  /* Up to here SiS conforming */
+#define SIS_RI_848x480   23
+#define SIS_RI_1360x768  24
+#define SIS_RI_1024x600  25
+#define SIS_RI_1152x768  26
+#define SIS_RI_768x576   27
+#define SIS_RI_1360x1024 28
+#define SIS_RI_1680x1050 29
+#define SIS_RI_1280x800  30
+#define SIS_RI_1920x1080 31
+#define SIS_RI_960x540   32
+#define SIS_RI_960x600   33
+
+/* CR5F */
+#define IsM650                  0x80
+
+/* Timing data */
+#define NTSCHT                  1716
+#define NTSC2HT                 1920
+#define NTSCVT                  525
+#define PALHT                   1728
+#define PALVT                   625
+#define StHiTVHT                892
+#define StHiTVVT                1126
+#define StHiTextTVHT            1000
+#define StHiTextTVVT            1126
+#define ExtHiTVHT               2100
+#define ExtHiTVVT               1125
+
+/* Indices in (VB)VCLKData tables */
+
+#define VCLK28                  0x00   /* Index in VCLKData table (300 and 315) */
+#define VCLK40                  0x04   /* Index in VCLKData table (300 and 315) */
+#define VCLK65_300              0x09   /* Index in VCLKData table (300) */
+#define VCLK108_2_300           0x14   /* Index in VCLKData table (300) */
+#define VCLK81_300		0x3f   /* Index in VCLKData table (300) */
+#define VCLK108_3_300           0x42   /* Index in VCLKData table (300) */
+#define VCLK100_300             0x43   /* Index in VCLKData table (300) */
+#define VCLK34_300              0x3d   /* Index in VCLKData table (300) */
+#define VCLK_CUSTOM_300		0x47
+#define VCLK65_315              0x0b   /* Index in (VB)VCLKData table (315) */
+#define VCLK108_2_315           0x19   /* Index in (VB)VCLKData table (315) */
+#define VCLK81_315		0x5b   /* Index in (VB)VCLKData table (315) */
+#define VCLK162_315             0x5e   /* Index in (VB)VCLKData table (315) */
+#define VCLK108_3_315           0x45   /* Index in VBVCLKData table (315) */
+#define VCLK100_315             0x46   /* Index in VBVCLKData table (315) */
+#define VCLK34_315              0x55
+#define VCLK68_315		0x0d
+#define VCLK_1280x800_315_2	0x5c   /* Index in VBVCLKData table (315) */
+#define VCLK121_315		0x5d   /* Index in VBVCLKData table (315) */
+#define VCLK_1280x720		0x5f
+#define VCLK_1280x768_2		0x60
+#define VCLK_1280x768_3		0x61   /* (unused?) */
+#define VCLK_CUSTOM_315		0x62
+#define VCLK_1280x720_2		0x63
+#define VCLK_720x480		0x67
+#define VCLK_720x576		0x68
+#define VCLK_768x576		0x68
+#define VCLK_848x480		0x65
+#define VCLK_856x480		0x66
+#define VCLK_800x480		0x65
+#define VCLK_1024x576		0x51
+#define VCLK_1152x864		0x64
+#define VCLK_1360x768		0x58
+#define VCLK_1280x800_315	0x6c
+
+#define TVCLKBASE_300		0x21   /* Indices on TV clocks in VCLKData table (300) */
+#define TVCLKBASE_315	        0x3a   /* Indices on TV clocks in (VB)VCLKData table (315) */
+#define TVVCLKDIV2              0x00   /* Index relative to TVCLKBASE */
+#define TVVCLK                  0x01   /* Index relative to TVCLKBASE */
+#define HiTVVCLKDIV2            0x02   /* Index relative to TVCLKBASE */
+#define HiTVVCLK                0x03   /* Index relative to TVCLKBASE */
+#define HiTVSimuVCLK            0x04   /* Index relative to TVCLKBASE */
+#define HiTVTextVCLK            0x05   /* Index relative to TVCLKBASE */
+#define YPbPr750pVCLK		0x25   /* Index relative to TVCLKBASE; was 0x0f NOT relative */
+
+/* ------------------------------ */
+
+#define SetSCARTOutput          0x01
+
+#define HotPlugFunction         0x08
+
+#define StStructSize            0x06
+
+#define SIS_VIDEO_CAPTURE       0x00 - 0x30
+#define SIS_VIDEO_PLAYBACK      0x02 - 0x30
+#define SIS_CRT2_PORT_04        0x04 - 0x30
+#define SIS_CRT2_PORT_10        0x10 - 0x30
+#define SIS_CRT2_PORT_12        0x12 - 0x30
+#define SIS_CRT2_PORT_14        0x14 - 0x30
+
+#define ADR_CRT2PtrData         0x20E
+#define offset_Zurac            0x210   /* TW: Trumpion Zurac data pointer */
+#define ADR_LVDSDesPtrData      0x212
+#define ADR_LVDSCRT1DataPtr     0x214
+#define ADR_CHTVVCLKPtr         0x216
+#define ADR_CHTVRegDataPtr      0x218
+
+#define LCDDataLen              8
+#define HiTVDataLen             12
+#define TVDataLen               16
+
+#define LVDSDataLen             6
+#define LVDSDesDataLen          3
+#define ActiveNonExpanding      0x40
+#define ActiveNonExpandingShift 6
+#define ActivePAL               0x20
+#define ActivePALShift          5
+#define ModeSwitchStatus        0x0F
+#define SoftTVType              0x40
+#define SoftSettingAddr         0x52
+#define ModeSettingAddr         0x53
+
+#define _PanelType00             0x00
+#define _PanelType01             0x08
+#define _PanelType02             0x10
+#define _PanelType03             0x18
+#define _PanelType04             0x20
+#define _PanelType05             0x28
+#define _PanelType06             0x30
+#define _PanelType07             0x38
+#define _PanelType08             0x40
+#define _PanelType09             0x48
+#define _PanelType0A             0x50
+#define _PanelType0B             0x58
+#define _PanelType0C             0x60
+#define _PanelType0D             0x68
+#define _PanelType0E             0x70
+#define _PanelType0F             0x78
+
+#define PRIMARY_VGA       	0     /* 1: SiS is primary vga 0:SiS is secondary vga */
+
+#define BIOSIDCodeAddr          0x235  /* Offsets to ptrs in BIOS image */
+#define OEMUtilIDCodeAddr       0x237
+#define VBModeIDTableAddr       0x239
+#define OEMTVPtrAddr            0x241
+#define PhaseTableAddr          0x243
+#define NTSCFilterTableAddr     0x245
+#define PALFilterTableAddr      0x247
+#define OEMLCDPtr_1Addr         0x249
+#define OEMLCDPtr_2Addr         0x24B
+#define LCDHPosTable_1Addr      0x24D
+#define LCDHPosTable_2Addr      0x24F
+#define LCDVPosTable_1Addr      0x251
+#define LCDVPosTable_2Addr      0x253
+#define OEMLCDPIDTableAddr      0x255
+
+#define VBModeStructSize        5
+#define PhaseTableSize          4
+#define FilterTableSize         4
+#define LCDHPosTableSize        7
+#define LCDVPosTableSize        5
+#define OEMLVDSPIDTableSize     4
+#define LVDSHPosTableSize       4
+#define LVDSVPosTableSize       6
+
+#define VB_ModeID               0
+#define VB_TVTableIndex         1
+#define VB_LCDTableIndex        2
+#define VB_LCDHIndex            3
+#define VB_LCDVIndex            4
+
+#define OEMLCDEnable            0x0001
+#define OEMLCDDelayEnable       0x0002
+#define OEMLCDPOSEnable         0x0004
+#define OEMTVEnable             0x0100
+#define OEMTVDelayEnable        0x0200
+#define OEMTVFlickerEnable      0x0400
+#define OEMTVPhaseEnable        0x0800
+#define OEMTVFilterEnable       0x1000
+
+#define OEMLCDPanelIDSupport    0x0080
+
+/*
+  =============================================================
+   		  for 315 series (old data layout)
+  =============================================================
+*/
+#define SoftDRAMType        0x80
+#define SoftSetting_OFFSET  0x52
+#define SR07_OFFSET  0x7C
+#define SR15_OFFSET  0x7D
+#define SR16_OFFSET  0x81
+#define SR17_OFFSET  0x85
+#define SR19_OFFSET  0x8D
+#define SR1F_OFFSET  0x99
+#define SR21_OFFSET  0x9A
+#define SR22_OFFSET  0x9B
+#define SR23_OFFSET  0x9C
+#define SR24_OFFSET  0x9D
+#define SR25_OFFSET  0x9E
+#define SR31_OFFSET  0x9F
+#define SR32_OFFSET  0xA0
+#define SR33_OFFSET  0xA1
+
+#define CR40_OFFSET  0xA2
+#define SR25_1_OFFSET  0xF6
+#define CR49_OFFSET  0xF7
+
+#define VB310Data_1_2_Offset  0xB6
+#define VB310Data_4_D_Offset  0xB7
+#define VB310Data_4_E_Offset  0xB8
+#define VB310Data_4_10_Offset 0xBB
+
+#define RGBSenseDataOffset    0xBD
+#define YCSenseDataOffset     0xBF
+#define VideoSenseDataOffset  0xC1
+#define OutputSelectOffset    0xF3
+
+#define ECLK_MCLK_DISTANCE  0x14
+#define VBIOSTablePointerStart    0x100
+#define StandTablePtrOffset       VBIOSTablePointerStart+0x02
+#define EModeIDTablePtrOffset     VBIOSTablePointerStart+0x04
+#define CRT1TablePtrOffset        VBIOSTablePointerStart+0x06
+#define ScreenOffsetPtrOffset     VBIOSTablePointerStart+0x08
+#define VCLKDataPtrOffset         VBIOSTablePointerStart+0x0A
+#define MCLKDataPtrOffset         VBIOSTablePointerStart+0x0E
+#define CRT2PtrDataPtrOffset      VBIOSTablePointerStart+0x10
+#define TVAntiFlickPtrOffset      VBIOSTablePointerStart+0x12
+#define TVDelayPtr1Offset         VBIOSTablePointerStart+0x14
+#define TVPhaseIncrPtr1Offset     VBIOSTablePointerStart+0x16
+#define TVYFilterPtr1Offset       VBIOSTablePointerStart+0x18
+#define LCDDelayPtr1Offset        VBIOSTablePointerStart+0x20
+#define TVEdgePtr1Offset          VBIOSTablePointerStart+0x24
+#define CRT2Delay1Offset          VBIOSTablePointerStart+0x28
+
+#endif