Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/include/asm-arm/arch-lh7a40x/irqs.h b/include/asm-arm/arch-lh7a40x/irqs.h
new file mode 100644
index 0000000..f91f3e5
--- /dev/null
+++ b/include/asm-arm/arch-lh7a40x/irqs.h
@@ -0,0 +1,196 @@
+/* include/asm-arm/arch-lh7a40x/irqs.h
+ *
+ * Copyright (C) 2004 Coastal Environmental Systems
+ * Copyright (C) 2004 Logic Product Development
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ */
+
+/* It is to be seen whether or not we can build a kernel for more than
+ * one board. For the time being, these macros assume that we cannot.
+ * Thus, it is OK to ifdef machine/board specific IRQ assignments.
+ */
+
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+#include <linux/config.h>
+
+#define FIQ_START 80
+
+#if defined (CONFIG_ARCH_LH7A400)
+
+ /* FIQs */
+
+# define IRQ_GPIO0FIQ 0 /* GPIO External FIQ Interrupt on F0 */
+# define IRQ_BLINT 1 /* Battery Low */
+# define IRQ_WEINT 2 /* Watchdog Timer, WDT overflow */
+# define IRQ_MCINT 3 /* Media Change, MEDCHG pin rising */
+
+ /* IRQs */
+
+# define IRQ_CSINT 4 /* Audio Codec (ACI) */
+# define IRQ_GPIO1INTR 5 /* GPIO External IRQ Interrupt on F1 */
+# define IRQ_GPIO2INTR 6 /* GPIO External IRQ Interrupt on F2 */
+# define IRQ_GPIO3INTR 7 /* GPIO External IRQ Interrupt on F3 */
+# define IRQ_T1UI 8 /* Timer 1 underflow */
+# define IRQ_T2UI 9 /* Timer 2 underflow */
+# define IRQ_RTCMI 10
+# define IRQ_TINTR 11 /* Clock State Controller 64 Hz tick (CSC) */
+# define IRQ_UART1INTR 12
+# define IRQ_UART2INTR 13
+# define IRQ_LCDINTR 14
+# define IRQ_SSIEOT 15 /* Synchronous Serial Interface (SSI) */
+# define IRQ_UART3INTR 16
+# define IRQ_SCIINTR 17 /* Smart Card Interface (SCI) */
+# define IRQ_AACINTR 18 /* Advanced Audio Codec (AAC) */
+# define IRQ_MMCINTR 19 /* Multimedia Card (MMC) */
+# define IRQ_USBINTR 20
+# define IRQ_DMAINTR 21
+# define IRQ_T3UI 22 /* Timer 3 underflow */
+# define IRQ_GPIO4INTR 23 /* GPIO External IRQ Interrupt on F4 */
+# define IRQ_GPIO5INTR 24 /* GPIO External IRQ Interrupt on F5 */
+# define IRQ_GPIO6INTR 25 /* GPIO External IRQ Interrupt on F6 */
+# define IRQ_GPIO7INTR 26 /* GPIO External IRQ Interrupt on F7 */
+# define IRQ_BMIINTR 27 /* Battery Monitor Interface (BMI) */
+
+# define NR_IRQ_CPU 28 /* IRQs directly recognized by CPU */
+
+ /* Given IRQ, return GPIO interrupt number 0-7 */
+# define IRQ_TO_GPIO(i) ((i) \
+ - (((i) > IRQ_GPIO3INTR) ? IRQ_GPIO4INTR - IRQ_GPIO3INTR - 1 : 0)\
+ - (((i) > IRQ_GPIO0INTR) ? IRQ_GPIO1INTR - IRQ_GPIO0INTR - 1 : 0))
+
+#endif
+
+#if defined (CONFIG_ARCH_LH7A404)
+
+# define IRQ_BROWN 0 /* Brownout */
+# define IRQ_WDTINTR 1 /* Watchdog Timer */
+# define IRQ_COMMRX 2 /* ARM Comm Rx for Debug */
+# define IRQ_COMMTX 3 /* ARM Comm Tx for Debug */
+# define IRQ_T1UI 4 /* Timer 1 underflow */
+# define IRQ_T2UI 5 /* Timer 2 underflow */
+# define IRQ_CSINT 6 /* Codec Interrupt (shared by AAC on 404) */
+# define IRQ_DMAM2P0 7 /* -- DMA Memory to Peripheral */
+# define IRQ_DMAM2P1 8
+# define IRQ_DMAM2P2 9
+# define IRQ_DMAM2P3 10
+# define IRQ_DMAM2P4 11
+# define IRQ_DMAM2P5 12
+# define IRQ_DMAM2P6 13
+# define IRQ_DMAM2P7 14
+# define IRQ_DMAM2P8 15
+# define IRQ_DMAM2P9 16
+# define IRQ_DMAM2M0 17 /* -- DMA Memory to Memory */
+# define IRQ_DMAM2M1 18
+# define IRQ_GPIO0INTR 19 /* -- GPIOF Interrupt */
+# define IRQ_GPIO1INTR 20
+# define IRQ_GPIO2INTR 21
+# define IRQ_GPIO3INTR 22
+# define IRQ_SOFT_V1_23 23 /* -- Unassigned */
+# define IRQ_SOFT_V1_24 24
+# define IRQ_SOFT_V1_25 25
+# define IRQ_SOFT_V1_26 26
+# define IRQ_SOFT_V1_27 27
+# define IRQ_SOFT_V1_28 28
+# define IRQ_SOFT_V1_29 29
+# define IRQ_SOFT_V1_30 30
+# define IRQ_SOFT_V1_31 31
+
+# define IRQ_BLINT 32 /* Battery Low */
+# define IRQ_BMIINTR 33 /* Battery Monitor */
+# define IRQ_MCINTR 34 /* Media Change */
+# define IRQ_TINTR 35 /* 64Hz Tick */
+# define IRQ_WEINT 36 /* Watchdog Expired */
+# define IRQ_RTCMI 37 /* Real-time Clock Match */
+# define IRQ_UART1INTR 38 /* UART1 Interrupt (including error) */
+# define IRQ_UART1ERR 39 /* UART1 Error */
+# define IRQ_UART2INTR 40 /* UART2 Interrupt (including error) */
+# define IRQ_UART2ERR 41 /* UART2 Error */
+# define IRQ_UART3INTR 42 /* UART3 Interrupt (including error) */
+# define IRQ_UART3ERR 43 /* UART3 Error */
+# define IRQ_SCIINTR 44 /* Smart Card */
+# define IRQ_TSCINTR 45 /* Touchscreen */
+# define IRQ_KMIINTR 46 /* Keyboard/Mouse (PS/2) */
+# define IRQ_GPIO4INTR 47 /* -- GPIOF Interrupt */
+# define IRQ_GPIO5INTR 48
+# define IRQ_GPIO6INTR 49
+# define IRQ_GPIO7INTR 50
+# define IRQ_T3UI 51 /* Timer 3 underflow */
+# define IRQ_LCDINTR 52 /* LCD Controller */
+# define IRQ_SSPINTR 53 /* Synchronous Serial Port */
+# define IRQ_SDINTR 54 /* Secure Digital Port (MMC) */
+# define IRQ_USBINTR 55 /* USB Device Port */
+# define IRQ_USHINTR 56 /* USB Host Port */
+# define IRQ_SOFT_V2_25 57 /* -- Unassigned */
+# define IRQ_SOFT_V2_26 58
+# define IRQ_SOFT_V2_27 59
+# define IRQ_SOFT_V2_28 60
+# define IRQ_SOFT_V2_29 61
+# define IRQ_SOFT_V2_30 62
+# define IRQ_SOFT_V2_31 63
+
+# define NR_IRQ_CPU 64 /* IRQs directly recognized by CPU */
+
+ /* Given IRQ, return GPIO interrupt number 0-7 */
+# define IRQ_TO_GPIO(i) ((i) \
+ - (((i) > IRQ_GPIO3INTR) ? IRQ_GPIO4INTR - IRQ_GPIO3INTR - 1 : 0)\
+ - IRQ_GPIO0INTR)
+
+ /* Vector Address constants */
+# define VA_VECTORED 0x100 /* Set for vectored interrupt */
+# define VA_VIC1DEFAULT 0x200 /* Set as default VECTADDR for VIC1 */
+# define VA_VIC2DEFAULT 0x400 /* Set as default VECTADDR for VIC2 */
+
+#endif
+
+ /* IRQ aliases */
+
+#if !defined (IRQ_GPIO0INTR)
+# define IRQ_GPIO0INTR IRQ_GPIO0FIQ
+#endif
+#define IRQ_TICK IRQ_TINTR
+#define IRQ_PCC1_RDY IRQ_GPIO6INTR /* PCCard 1 ready */
+#define IRQ_PCC2_RDY IRQ_GPIO7INTR /* PCCard 2 ready */
+
+#ifdef CONFIG_MACH_KEV7A400
+# define IRQ_TS IRQ_GPIOFIQ /* Touchscreen */
+# define IRQ_CPLD IRQ_GPIO1INTR /* CPLD cascade */
+# define IRQ_PCC1_CD IRQ_GPIO_F2 /* PCCard 1 card detect */
+# define IRQ_PCC2_CD IRQ_GPIO_F3 /* PCCard 2 card detect */
+#endif
+
+#if defined (CONFIG_MACH_LPD7A400) || defined (CONFIG_MACH_LPD7A404)
+# define IRQ_CPLD_V28 IRQ_GPIO7INTR /* CPLD cascade through GPIO_PF7 */
+# define IRQ_CPLD_V34 IRQ_GPIO3INTR /* CPLD cascade through GPIO_PF3 */
+#endif
+
+ /* System specific IRQs */
+
+#define IRQ_BOARD_START NR_IRQ_CPU
+
+#ifdef CONFIG_MACH_KEV7A400
+# define IRQ_KEV7A400_CPLD IRQ_BOARD_START
+# define NR_IRQ_BOARD 5
+# define IRQ_KEV7A400_MMC_CD IRQ_KEV7A400_CPLD + 0 /* MMC Card Detect */
+# define IRQ_KEV7A400_RI2 IRQ_KEV7A400_CPLD + 1 /* Ring Indicator 2 */
+# define IRQ_KEV7A400_IDE_CF IRQ_KEV7A400_CPLD + 2 /* Compact Flash (?) */
+# define IRQ_KEV7A400_ETH_INT IRQ_KEV7A400_CPLD + 3 /* Ethernet chip */
+# define IRQ_KEV7A400_INT IRQ_KEV7A400_CPLD + 4
+#endif
+
+#if defined (CONFIG_MACH_LPD7A400) || defined (CONFIG_MACH_LPD7A404)
+# define IRQ_LPD7A40X_CPLD IRQ_BOARD_START
+# define NR_IRQ_BOARD 2
+# define IRQ_LPD7A40X_ETH_INT IRQ_LPD7A40X_CPLD + 0 /* Ethernet chip */
+# define IRQ_LPD7A400_TS IRQ_LPD7A40X_CPLD + 1 /* Touch screen */
+#endif
+
+#define NR_IRQS (NR_IRQ_CPU + NR_IRQ_BOARD)
+
+#endif