Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/include/asm-arm26/ecard.h b/include/asm-arm26/ecard.h
new file mode 100644
index 0000000..6669193
--- /dev/null
+++ b/include/asm-arm26/ecard.h
@@ -0,0 +1,294 @@
+/*
+ * linux/include/asm-arm26/ecard.h
+ *
+ * definitions for expansion cards
+ *
+ * This is a new system as from Linux 1.2.3
+ *
+ * Changelog:
+ * 11-12-1996 RMK Further minor improvements
+ * 12-09-1997 RMK Added interrupt enable/disable for card level
+ * 18-05-2003 IM Adjusted for ARM26
+ *
+ * Reference: Acorns Risc OS 3 Programmers Reference Manuals.
+ */
+
+#ifndef __ASM_ECARD_H
+#define __ASM_ECARD_H
+
+/*
+ * Currently understood cards (but not necessarily
+ * supported):
+ * Manufacturer Product ID
+ */
+#define MANU_ACORN 0x0000
+#define PROD_ACORN_SCSI 0x0002
+#define PROD_ACORN_ETHER1 0x0003
+#define PROD_ACORN_MFM 0x000b
+
+#define MANU_CCONCEPTS 0x0009
+#define PROD_CCONCEPTS_COLOURCARD 0x0050
+
+#define MANU_ANT2 0x0011
+#define PROD_ANT_ETHER3 0x00a4
+
+#define MANU_ATOMWIDE 0x0017
+#define PROD_ATOMWIDE_3PSERIAL 0x0090
+
+#define MANU_IRLAM_INSTRUMENTS 0x001f
+#define MANU_IRLAM_INSTRUMENTS_ETHERN 0x5678
+
+#define MANU_OAK 0x0021
+#define PROD_OAK_SCSI 0x0058
+
+#define MANU_MORLEY 0x002b
+#define PROD_MORLEY_SCSI_UNCACHED 0x0067
+
+#define MANU_CUMANA 0x003a
+#define PROD_CUMANA_SCSI_2 0x003a
+#define PROD_CUMANA_SCSI_1 0x00a0
+
+#define MANU_ICS 0x003c
+#define PROD_ICS_IDE 0x00ae
+
+#define MANU_ICS2 0x003d
+#define PROD_ICS2_IDE 0x00ae
+
+#define MANU_SERPORT 0x003f
+#define PROD_SERPORT_DSPORT 0x00b9
+
+#define MANU_ARXE 0x0041
+#define PROD_ARXE_SCSI 0x00be
+
+#define MANU_I3 0x0046
+#define PROD_I3_ETHERLAN500 0x00d4
+#define PROD_I3_ETHERLAN600 0x00ec
+#define PROD_I3_ETHERLAN600A 0x011e
+
+#define MANU_ANT 0x0053
+#define PROD_ANT_ETHERM 0x00d8
+#define PROD_ANT_ETHERB 0x00e4
+
+#define MANU_ALSYSTEMS 0x005b
+#define PROD_ALSYS_SCSIATAPI 0x0107
+
+#define MANU_MCS 0x0063
+#define PROD_MCS_CONNECT32 0x0125
+
+#define MANU_EESOX 0x0064
+#define PROD_EESOX_SCSI2 0x008c
+
+#define MANU_YELLOWSTONE 0x0096
+#define PROD_YELLOWSTONE_RAPIDE32 0x0120
+
+#define MANU_SIMTEC 0x005f
+#define PROD_SIMTEC_IDE8 0x0130
+#define PROD_SIMTEC_IDE16 0x0131
+
+
+#ifdef ECARD_C
+#define CONST
+#else
+#define CONST const
+#endif
+
+#define MAX_ECARDS 4
+
+typedef enum { /* Cards address space */
+ ECARD_IOC,
+ ECARD_MEMC,
+ ECARD_EASI
+} card_type_t;
+
+typedef enum { /* Speed for ECARD_IOC space */
+ ECARD_SLOW = 0,
+ ECARD_MEDIUM = 1,
+ ECARD_FAST = 2,
+ ECARD_SYNC = 3
+} card_speed_t;
+
+struct ecard_id { /* Card ID structure */
+ unsigned short manufacturer;
+ unsigned short product;
+ void *data;
+};
+
+struct in_ecid { /* Packed card ID information */
+ unsigned short product; /* Product code */
+ unsigned short manufacturer; /* Manufacturer code */
+ unsigned char id:4; /* Simple ID */
+ unsigned char cd:1; /* Chunk dir present */
+ unsigned char is:1; /* Interrupt status pointers */
+ unsigned char w:2; /* Width */
+ unsigned char country; /* Country */
+ unsigned char irqmask; /* IRQ mask */
+ unsigned char fiqmask; /* FIQ mask */
+ unsigned long irqoff; /* IRQ offset */
+ unsigned long fiqoff; /* FIQ offset */
+};
+
+typedef struct expansion_card ecard_t;
+typedef unsigned long *loader_t;
+
+typedef struct { /* Card handler routines */
+ void (*irqenable)(ecard_t *ec, int irqnr);
+ void (*irqdisable)(ecard_t *ec, int irqnr);
+ int (*irqpending)(ecard_t *ec);
+ void (*fiqenable)(ecard_t *ec, int fiqnr);
+ void (*fiqdisable)(ecard_t *ec, int fiqnr);
+ int (*fiqpending)(ecard_t *ec);
+} expansioncard_ops_t;
+
+#define ECARD_NUM_RESOURCES (6)
+
+#define ECARD_RES_IOCSLOW (0)
+#define ECARD_RES_IOCMEDIUM (1)
+#define ECARD_RES_IOCFAST (2)
+#define ECARD_RES_IOCSYNC (3)
+#define ECARD_RES_MEMC (4)
+#define ECARD_RES_EASI (5)
+
+#define ecard_resource_start(ec,nr) ((ec)->resource[nr].start)
+#define ecard_resource_end(ec,nr) ((ec)->resource[nr].end)
+#define ecard_resource_len(ec,nr) ((ec)->resource[nr].end - \
+ (ec)->resource[nr].start + 1)
+
+/*
+ * This contains all the info needed on an expansion card
+ */
+struct expansion_card {
+ struct expansion_card *next;
+
+ struct device dev;
+ struct resource resource[ECARD_NUM_RESOURCES];
+
+ /* Public data */
+ volatile unsigned char *irqaddr; /* address of IRQ register */
+ volatile unsigned char *fiqaddr; /* address of FIQ register */
+ unsigned char irqmask; /* IRQ mask */
+ unsigned char fiqmask; /* FIQ mask */
+ unsigned char claimed; /* Card claimed? */
+
+ void *irq_data; /* Data for use for IRQ by card */
+ void *fiq_data; /* Data for use for FIQ by card */
+ const expansioncard_ops_t *ops; /* Enable/Disable Ops for card */
+
+ CONST unsigned int slot_no; /* Slot number */
+ CONST unsigned int dma; /* DMA number (for request_dma) */
+ CONST unsigned int irq; /* IRQ number (for request_irq) */
+ CONST unsigned int fiq; /* FIQ number (for request_irq) */
+ CONST card_type_t type; /* Type of card */
+ CONST struct in_ecid cid; /* Card Identification */
+
+ /* Private internal data */
+ const char *card_desc; /* Card description */
+ CONST unsigned int podaddr; /* Base Linux address for card */
+ CONST loader_t loader; /* loader program */
+ u64 dma_mask;
+};
+
+struct in_chunk_dir {
+ unsigned int start_offset;
+ union {
+ unsigned char string[256];
+ unsigned char data[1];
+ } d;
+};
+
+/*
+ * ecard_claim: claim an expansion card entry
+ * FIXME - are these atomic / called with interrupts off ?
+ */
+#define ecard_claim(ec) ((ec)->claimed = 1)
+
+/*
+ * ecard_release: release an expansion card entry
+ */
+#define ecard_release(ec) ((ec)->claimed = 0)
+
+/*
+ * Read a chunk from an expansion card
+ * cd : where to put read data
+ * ec : expansion card info struct
+ * id : id number to find
+ * num: (n+1)'th id to find.
+ */
+extern int ecard_readchunk (struct in_chunk_dir *cd, struct expansion_card *ec, int id, int num);
+
+/*
+ * Obtain the address of a card
+ */
+extern unsigned int ecard_address (struct expansion_card *ec, card_type_t card_type, card_speed_t speed);
+
+#ifdef ECARD_C
+/* Definitions internal to ecard.c - for it's use only!!
+ *
+ * External expansion card header as read from the card
+ */
+struct ex_ecid {
+ unsigned char r_irq:1;
+ unsigned char r_zero:1;
+ unsigned char r_fiq:1;
+ unsigned char r_id:4;
+ unsigned char r_a:1;
+
+ unsigned char r_cd:1;
+ unsigned char r_is:1;
+ unsigned char r_w:2;
+ unsigned char r_r1:4;
+
+ unsigned char r_r2:8;
+
+ unsigned char r_prod[2];
+
+ unsigned char r_manu[2];
+
+ unsigned char r_country;
+
+ unsigned char r_irqmask;
+ unsigned char r_irqoff[3];
+
+ unsigned char r_fiqmask;
+ unsigned char r_fiqoff[3];
+};
+
+/*
+ * Chunk directory entry as read from the card
+ */
+struct ex_chunk_dir {
+ unsigned char r_id;
+ unsigned char r_len[3];
+ unsigned long r_start;
+ union {
+ char string[256];
+ char data[1];
+ } d;
+#define c_id(x) ((x)->r_id)
+#define c_len(x) ((x)->r_len[0]|((x)->r_len[1]<<8)|((x)->r_len[2]<<16))
+#define c_start(x) ((x)->r_start)
+};
+
+#endif
+
+extern struct bus_type ecard_bus_type;
+
+#define ECARD_DEV(_d) container_of((_d), struct expansion_card, dev)
+
+struct ecard_driver {
+ int (*probe)(struct expansion_card *, const struct ecard_id *id);
+ void (*remove)(struct expansion_card *);
+ void (*shutdown)(struct expansion_card *);
+ const struct ecard_id *id_table;
+ unsigned int id;
+ struct device_driver drv;
+};
+
+#define ECARD_DRV(_d) container_of((_d), struct ecard_driver, drv)
+
+#define ecard_set_drvdata(ec,data) dev_set_drvdata(&(ec)->dev, (data))
+#define ecard_get_drvdata(ec) dev_get_drvdata(&(ec)->dev)
+
+int ecard_register_driver(struct ecard_driver *);
+void ecard_remove_driver(struct ecard_driver *);
+
+#endif