Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/include/asm-frv/dma.h b/include/asm-frv/dma.h
new file mode 100644
index 0000000..d8f9a2f
--- /dev/null
+++ b/include/asm-frv/dma.h
@@ -0,0 +1,129 @@
+/* dma.h: FRV DMA controller management
+ *
+ * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef _ASM_DMA_H
+#define _ASM_DMA_H
+
+//#define DMA_DEBUG 1
+
+#include <linux/config.h>
+#include <linux/interrupt.h>
+
+#undef MAX_DMA_CHANNELS /* don't use kernel/dma.c */
+
+/* under 2.4 this is actually needed by the new bootmem allocator */
+#define MAX_DMA_ADDRESS PAGE_OFFSET
+
+/*
+ * FRV DMA controller management
+ */
+struct pt_regs;
+
+typedef irqreturn_t (*dma_irq_handler_t)(int dmachan, unsigned long cstr, void *data,
+ struct pt_regs *regs);
+
+extern void frv_dma_init(void);
+
+extern int frv_dma_open(const char *devname,
+ unsigned long dmamask,
+ int dmacap,
+ dma_irq_handler_t handler,
+ unsigned long irq_flags,
+ void *data);
+
+/* channels required */
+#define FRV_DMA_MASK_ANY ULONG_MAX /* any channel */
+
+/* capabilities required */
+#define FRV_DMA_CAP_DREQ 0x01 /* DMA request pin */
+#define FRV_DMA_CAP_DACK 0x02 /* DMA ACK pin */
+#define FRV_DMA_CAP_DONE 0x04 /* DMA done pin */
+
+extern void frv_dma_close(int dma);
+
+extern void frv_dma_config(int dma, unsigned long ccfr, unsigned long cctr, unsigned long apr);
+
+extern void frv_dma_start(int dma,
+ unsigned long sba, unsigned long dba,
+ unsigned long pix, unsigned long six, unsigned long bcl);
+
+extern void frv_dma_restart_circular(int dma, unsigned long six);
+
+extern void frv_dma_stop(int dma);
+
+extern int is_frv_dma_interrupting(int dma);
+
+extern void frv_dma_dump(int dma);
+
+extern void frv_dma_status_clear(int dma);
+
+#define FRV_DMA_NCHANS 8
+#define FRV_DMA_4CHANS 4
+#define FRV_DMA_8CHANS 8
+
+#define DMAC_CCFRx 0x00 /* channel configuration reg */
+#define DMAC_CCFRx_CM_SHIFT 16
+#define DMAC_CCFRx_CM_DA 0x00000000
+#define DMAC_CCFRx_CM_SCA 0x00010000
+#define DMAC_CCFRx_CM_DCA 0x00020000
+#define DMAC_CCFRx_CM_2D 0x00030000
+#define DMAC_CCFRx_ATS_SHIFT 8
+#define DMAC_CCFRx_RS_INTERN 0x00000000
+#define DMAC_CCFRx_RS_EXTERN 0x00000001
+#define DMAC_CCFRx_RS_SHIFT 0
+
+#define DMAC_CSTRx 0x08 /* channel status reg */
+#define DMAC_CSTRx_FS 0x0000003f
+#define DMAC_CSTRx_NE 0x00000100
+#define DMAC_CSTRx_FED 0x00000200
+#define DMAC_CSTRx_WER 0x00000800
+#define DMAC_CSTRx_RER 0x00001000
+#define DMAC_CSTRx_CE 0x00002000
+#define DMAC_CSTRx_INT 0x00800000
+#define DMAC_CSTRx_BUSY 0x80000000
+
+#define DMAC_CCTRx 0x10 /* channel control reg */
+#define DMAC_CCTRx_DSIZ_1 0x00000000
+#define DMAC_CCTRx_DSIZ_2 0x00000001
+#define DMAC_CCTRx_DSIZ_4 0x00000002
+#define DMAC_CCTRx_DSIZ_32 0x00000005
+#define DMAC_CCTRx_DAU_HOLD 0x00000000
+#define DMAC_CCTRx_DAU_INC 0x00000010
+#define DMAC_CCTRx_DAU_DEC 0x00000020
+#define DMAC_CCTRx_SSIZ_1 0x00000000
+#define DMAC_CCTRx_SSIZ_2 0x00000100
+#define DMAC_CCTRx_SSIZ_4 0x00000200
+#define DMAC_CCTRx_SSIZ_32 0x00000500
+#define DMAC_CCTRx_SAU_HOLD 0x00000000
+#define DMAC_CCTRx_SAU_INC 0x00001000
+#define DMAC_CCTRx_SAU_DEC 0x00002000
+#define DMAC_CCTRx_FC 0x08000000
+#define DMAC_CCTRx_ICE 0x10000000
+#define DMAC_CCTRx_IE 0x40000000
+#define DMAC_CCTRx_ACT 0x80000000
+
+#define DMAC_SBAx 0x18 /* source base address reg */
+#define DMAC_DBAx 0x20 /* data base address reg */
+#define DMAC_PIXx 0x28 /* primary index reg */
+#define DMAC_SIXx 0x30 /* secondary index reg */
+#define DMAC_BCLx 0x38 /* byte count limit reg */
+#define DMAC_APRx 0x40 /* alternate pointer reg */
+
+/*
+ * required for PCI + MODULES
+ */
+#ifdef CONFIG_PCI
+extern int isa_dma_bridge_buggy;
+#else
+#define isa_dma_bridge_buggy (0)
+#endif
+
+#endif /* _ASM_DMA_H */