Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/include/asm-m68knommu/m527xsim.h b/include/asm-m68knommu/m527xsim.h
new file mode 100644
index 0000000..d280d01
--- /dev/null
+++ b/include/asm-m68knommu/m527xsim.h
@@ -0,0 +1,58 @@
+/****************************************************************************/
+
+/*
+ * m527xsim.h -- ColdFire 5270/5271 System Integration Module support.
+ *
+ * (C) Copyright 2004, Greg Ungerer (gerg@snapgear.com)
+ */
+
+/****************************************************************************/
+#ifndef m527xsim_h
+#define m527xsim_h
+/****************************************************************************/
+
+#include <linux/config.h>
+
+/*
+ * Define the 5270/5271 SIM register set addresses.
+ */
+#define MCFICM_INTC0 0x0c00 /* Base for Interrupt Ctrl 0 */
+#define MCFICM_INTC1 0x0d00 /* Base for Interrupt Ctrl 1 */
+#define MCFINTC_IPRH 0x00 /* Interrupt pending 32-63 */
+#define MCFINTC_IPRL 0x04 /* Interrupt pending 1-31 */
+#define MCFINTC_IMRH 0x08 /* Interrupt mask 32-63 */
+#define MCFINTC_IMRL 0x0c /* Interrupt mask 1-31 */
+#define MCFINTC_INTFRCH 0x10 /* Interrupt force 32-63 */
+#define MCFINTC_INTFRCL 0x14 /* Interrupt force 1-31 */
+#define MCFINTC_IRLR 0x18 /* */
+#define MCFINTC_IACKL 0x19 /* */
+#define MCFINTC_ICR0 0x40 /* Base ICR register */
+
+#define MCFINT_VECBASE 64 /* Vector base number */
+#define MCFINT_UART0 13 /* Interrupt number for UART0 */
+#define MCFINT_UART1 14 /* Interrupt number for UART1 */
+#define MCFINT_UART2 15 /* Interrupt number for UART2 */
+#define MCFINT_PIT1 36 /* Interrupt number for PIT1 */
+
+/*
+ * SDRAM configuration registers.
+ */
+#ifdef CONFIG_M5271EVB
+#define MCFSIM_DCR 0x40 /* SDRAM control */
+#define MCFSIM_DACR0 0x48 /* SDRAM base address 0 */
+#define MCFSIM_DMR0 0x4c /* SDRAM address mask 0 */
+#define MCFSIM_DACR1 0x50 /* SDRAM base address 1 */
+#define MCFSIM_DMR1 0x54 /* SDRAM address mask 1 */
+#else
+#define MCFSIM_DMR 0x40 /* SDRAM mode */
+#define MCFSIM_DCR 0x44 /* SDRAM control */
+#define MCFSIM_DCFG1 0x48 /* SDRAM configuration 1 */
+#define MCFSIM_DCFG2 0x4c /* SDRAM configuration 2 */
+#define MCFSIM_DBAR0 0x50 /* SDRAM base address 0 */
+#define MCFSIM_DMR0 0x54 /* SDRAM address mask 0 */
+#define MCFSIM_DBAR1 0x58 /* SDRAM base address 1 */
+#define MCFSIM_DMR1 0x5c /* SDRAM address mask 1 */
+#endif
+
+/****************************************************************************/
+#endif /* m527xsim_h */