Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/include/asm-mips/dec/kn03.h b/include/asm-mips/dec/kn03.h
new file mode 100644
index 0000000..676abd1
--- /dev/null
+++ b/include/asm-mips/dec/kn03.h
@@ -0,0 +1,83 @@
+/*
+ * Hardware info about DECstation 5000/2x0 systems (otherwise known as
+ * 3max+) and DECsystem 5900 systems (otherwise known as bigmax) which
+ * differ mechanically but are otherwise identical (both are known as
+ * KN03).
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1995,1996 by Paul M. Antoine, some code and definitions
+ * are by courtesy of Chris Fraser.
+ * Copyright (C) 2000, 2002, 2003 Maciej W. Rozycki
+ */
+#ifndef __ASM_MIPS_DEC_KN03_H
+#define __ASM_MIPS_DEC_KN03_H
+
+#include <asm/addrspace.h>
+#include <asm/dec/ecc.h>
+#include <asm/dec/ioasic_addrs.h>
+
+#define KN03_SLOT_BASE KSEG1ADDR(0x1f800000)
+
+/*
+ * Some port addresses...
+ */
+#define KN03_IOASIC_BASE (KN03_SLOT_BASE + IOASIC_IOCTL) /* I/O ASIC */
+#define KN03_RTC_BASE (KN03_SLOT_BASE + IOASIC_TOY) /* RTC */
+#define KN03_MCR_BASE (KN03_SLOT_BASE + IOASIC_MCR) /* MCR */
+
+
+/*
+ * CPU interrupt bits.
+ */
+#define KN03_CPU_INR_HALT 6 /* HALT button */
+#define KN03_CPU_INR_BUS 5 /* memory, I/O bus read/write errors */
+#define KN03_CPU_INR_RES_4 4 /* unused */
+#define KN03_CPU_INR_RTC 3 /* DS1287 RTC */
+#define KN03_CPU_INR_CASCADE 2 /* I/O ASIC cascade */
+
+/*
+ * I/O ASIC interrupt bits. Star marks denote non-IRQ status bits.
+ */
+#define KN03_IO_INR_3MAXP 15 /* (*) 3max+/bigmax ID */
+#define KN03_IO_INR_NVRAM 14 /* (*) NVRAM clear jumper */
+#define KN03_IO_INR_TC2 13 /* TURBOchannel slot #2 */
+#define KN03_IO_INR_TC1 12 /* TURBOchannel slot #1 */
+#define KN03_IO_INR_TC0 11 /* TURBOchannel slot #0 */
+#define KN03_IO_INR_NRMOD 10 /* (*) NRMOD manufacturing jumper */
+#define KN03_IO_INR_ASC 9 /* ASC (NCR53C94) SCSI */
+#define KN03_IO_INR_LANCE 8 /* LANCE (Am7990) Ethernet */
+#define KN03_IO_INR_SCC1 7 /* SCC (Z85C30) serial #1 */
+#define KN03_IO_INR_SCC0 6 /* SCC (Z85C30) serial #0 */
+#define KN03_IO_INR_RTC 5 /* DS1287 RTC */
+#define KN03_IO_INR_PSU 4 /* power supply unit warning */
+#define KN03_IO_INR_RES_3 3 /* unused */
+#define KN03_IO_INR_ASC_DATA 2 /* SCSI data ready (for PIO) */
+#define KN03_IO_INR_PBNC 1 /* ~HALT button debouncer */
+#define KN03_IO_INR_PBNO 0 /* HALT button debouncer */
+
+
+/*
+ * Memory Control Register bits.
+ */
+#define KN03_MCR_RES_16 (0xffff<<16) /* unused */
+#define KN03_MCR_DIAGCHK (1<<15) /* diagn/norml ECC reads */
+#define KN03_MCR_DIAGGEN (1<<14) /* diagn/norml ECC writes */
+#define KN03_MCR_CORRECT (1<<13) /* ECC correct/check */
+#define KN03_MCR_RES_11 (0x3<<12) /* unused */
+#define KN03_MCR_BNK32M (1<<10) /* 32M/8M stride */
+#define KN03_MCR_RES_7 (0x7<<7) /* unused */
+#define KN03_MCR_CHECK (0x7f<<0) /* diagnostic check bits */
+
+/*
+ * I/O ASIC System Support Register bits.
+ */
+#define KN03_IO_SSR_TXDIS1 (1<<14) /* SCC1 transmit disable */
+#define KN03_IO_SSR_TXDIS0 (1<<13) /* SCC0 transmit disable */
+#define KN03_IO_SSR_RES_12 (1<<12) /* unused */
+
+#define KN03_IO_SSR_LEDS (0xff<<0) /* ~diagnostic LEDs */
+
+#endif /* __ASM_MIPS_DEC_KN03_H */