Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
diff --git a/include/asm-parisc/pdcpat.h b/include/asm-parisc/pdcpat.h
new file mode 100644
index 0000000..b4b34c0
--- /dev/null
+++ b/include/asm-parisc/pdcpat.h
@@ -0,0 +1,337 @@
+#ifndef __PARISC_PATPDC_H
+#define __PARISC_PATPDC_H
+
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright 2000 (c) Hewlett Packard (Paul Bame <bame()spam.parisc-linux.org>)
+ * Copyright 2000,2004 (c) Grant Grundler <grundler()nahspam.parisc-linux.org>
+ */
+
+
+#define PDC_PAT_CELL           	64L   /* Interface for gaining and 
+                                         * manipulatin g cell state within PD */
+#define PDC_PAT_CELL_GET_NUMBER    0L   /* Return Cell number */
+#define PDC_PAT_CELL_GET_INFO      1L   /* Returns info about Cell */
+#define PDC_PAT_CELL_MODULE        2L   /* Returns info about Module */
+#define PDC_PAT_CELL_SET_ATTENTION 9L   /* Set Cell Attention indicator */
+#define PDC_PAT_CELL_NUMBER_TO_LOC 10L   /* Cell Number -> Location */
+#define PDC_PAT_CELL_WALK_FABRIC   11L   /* Walk the Fabric */
+#define PDC_PAT_CELL_GET_RDT_SIZE  12L   /* Return Route Distance Table Sizes */
+#define PDC_PAT_CELL_GET_RDT       13L   /* Return Route Distance Tables */
+#define PDC_PAT_CELL_GET_LOCAL_PDH_SZ 14L /* Read Local PDH Buffer Size */
+#define PDC_PAT_CELL_SET_LOCAL_PDH    15L  /* Write Local PDH Buffer */
+#define PDC_PAT_CELL_GET_REMOTE_PDH_SZ 16L /* Return Remote PDH Buffer Size */
+#define PDC_PAT_CELL_GET_REMOTE_PDH 17L /* Read Remote PDH Buffer */
+#define PDC_PAT_CELL_GET_DBG_INFO   128L  /* Return DBG Buffer Info */
+#define PDC_PAT_CELL_CHANGE_ALIAS   129L  /* Change Non-Equivalent Alias Chacking */
+
+
+/*
+** Arg to PDC_PAT_CELL_MODULE memaddr[4]
+**
+** Addresses on the Merced Bus != all Runway Bus addresses.
+** This is intended for programming SBA/LBA chips range registers.
+*/
+#define IO_VIEW      0UL
+#define PA_VIEW      1UL
+
+/* PDC_PAT_CELL_MODULE entity type values */
+#define	PAT_ENTITY_CA	0	/* central agent */
+#define	PAT_ENTITY_PROC	1	/* processor */
+#define	PAT_ENTITY_MEM	2	/* memory controller */
+#define	PAT_ENTITY_SBA	3	/* system bus adapter */
+#define	PAT_ENTITY_LBA	4	/* local bus adapter */
+#define	PAT_ENTITY_PBC	5	/* processor bus converter */
+#define	PAT_ENTITY_XBC	6	/* crossbar fabric connect */
+#define	PAT_ENTITY_RC	7	/* fabric interconnect */
+
+/* PDC_PAT_CELL_MODULE address range type values */
+#define PAT_PBNUM           0         /* PCI Bus Number */
+#define PAT_LMMIO           1         /* < 4G MMIO Space */
+#define PAT_GMMIO           2         /* > 4G MMIO Space */
+#define PAT_NPIOP           3         /* Non Postable I/O Port Space */
+#define PAT_PIOP            4         /* Postable I/O Port Space */
+#define PAT_AHPA            5         /* Addional HPA Space */
+#define PAT_UFO             6         /* HPA Space (UFO for Mariposa) */
+#define PAT_GNIP            7         /* GNI Reserved Space */
+
+
+
+/* PDC PAT CHASSIS LOG -- Platform logging & forward progress functions */
+
+#define PDC_PAT_CHASSIS_LOG		65L
+#define PDC_PAT_CHASSIS_WRITE_LOG    	0L /* Write Log Entry */
+#define PDC_PAT_CHASSIS_READ_LOG     	1L /* Read  Log Entry */
+
+
+/* PDC PAT CPU  -- CPU configuration within the protection domain */
+
+#define PDC_PAT_CPU                	67L
+#define PDC_PAT_CPU_INFO            	0L /* Return CPU config info */
+#define PDC_PAT_CPU_DELETE          	1L /* Delete CPU */
+#define PDC_PAT_CPU_ADD             	2L /* Add    CPU */
+#define PDC_PAT_CPU_GET_NUMBER      	3L /* Return CPU Number */
+#define PDC_PAT_CPU_GET_HPA         	4L /* Return CPU HPA */
+#define PDC_PAT_CPU_STOP            	5L /* Stop   CPU */
+#define PDC_PAT_CPU_RENDEZVOUS      	6L /* Rendezvous CPU */
+#define PDC_PAT_CPU_GET_CLOCK_INFO  	7L /* Return CPU Clock info */
+#define PDC_PAT_CPU_GET_RENDEZVOUS_STATE 8L /* Return Rendezvous State */
+#define PDC_PAT_CPU_PLUNGE_FABRIC 	128L /* Plunge Fabric */
+#define PDC_PAT_CPU_UPDATE_CACHE_CLEANSING 129L /* Manipulate Cache 
+                                                 * Cleansing Mode */
+/*  PDC PAT EVENT -- Platform Events */
+
+#define PDC_PAT_EVENT              	68L
+#define PDC_PAT_EVENT_GET_CAPS     	0L /* Get Capabilities */
+#define PDC_PAT_EVENT_SET_MODE     	1L /* Set Notification Mode */
+#define PDC_PAT_EVENT_SCAN         	2L /* Scan Event */
+#define PDC_PAT_EVENT_HANDLE       	3L /* Handle Event */
+#define PDC_PAT_EVENT_GET_NB_CALL  	4L /* Get Non-Blocking call Args */
+
+/*  PDC PAT HPMC -- Cause processor to go into spin loop, and wait
+ *  			for wake up from Monarch Processor.
+ */
+
+#define PDC_PAT_HPMC               70L
+#define PDC_PAT_HPMC_RENDEZ_CPU     0L /* go into spin loop */
+#define PDC_PAT_HPMC_SET_PARAMS     1L /* Allows OS to specify intr which PDC 
+                                        * will use to interrupt OS during
+                                        * machine check rendezvous */
+
+/* parameters for PDC_PAT_HPMC_SET_PARAMS: */
+#define HPMC_SET_PARAMS_INTR 	    1L /* Rendezvous Interrupt */
+#define HPMC_SET_PARAMS_WAKE 	    2L /* Wake up processor */
+
+
+/*  PDC PAT IO  -- On-line services for I/O modules */
+
+#define PDC_PAT_IO                  71L
+#define PDC_PAT_IO_GET_SLOT_STATUS   	5L /* Get Slot Status Info*/
+#define PDC_PAT_IO_GET_LOC_FROM_HARDWARE 6L /* Get Physical Location from */
+                                            /* Hardware Path */
+#define PDC_PAT_IO_GET_HARDWARE_FROM_LOC 7L /* Get Hardware Path from 
+                                             * Physical Location */
+#define PDC_PAT_IO_GET_PCI_CONFIG_FROM_HW 11L /* Get PCI Configuration
+                                               * Address from Hardware Path */
+#define PDC_PAT_IO_GET_HW_FROM_PCI_CONFIG 12L /* Get Hardware Path 
+                                               * from PCI Configuration Address */
+#define PDC_PAT_IO_READ_HOST_BRIDGE_INFO 13L  /* Read Host Bridge State Info */
+#define PDC_PAT_IO_CLEAR_HOST_BRIDGE_INFO 14L /* Clear Host Bridge State Info*/
+#define PDC_PAT_IO_GET_PCI_ROUTING_TABLE_SIZE 15L /* Get PCI INT Routing Table 
+                                                   * Size */
+#define PDC_PAT_IO_GET_PCI_ROUTING_TABLE  16L /* Get PCI INT Routing Table */
+#define PDC_PAT_IO_GET_HINT_TABLE_SIZE 	17L /* Get Hint Table Size */
+#define PDC_PAT_IO_GET_HINT_TABLE   	18L /* Get Hint Table */
+#define PDC_PAT_IO_PCI_CONFIG_READ  	19L /* PCI Config Read */
+#define PDC_PAT_IO_PCI_CONFIG_WRITE 	20L /* PCI Config Write */
+#define PDC_PAT_IO_GET_NUM_IO_SLOTS 	21L /* Get Number of I/O Bay Slots in 
+                                       		  * Cabinet */
+#define PDC_PAT_IO_GET_LOC_IO_SLOTS 	22L /* Get Physical Location of I/O */
+                                   		     /* Bay Slots in Cabinet */
+#define PDC_PAT_IO_BAY_STATUS_INFO  	28L /* Get I/O Bay Slot Status Info */
+#define PDC_PAT_IO_GET_PROC_VIEW        29L /* Get Processor view of IO address */
+#define PDC_PAT_IO_PROG_SBA_DIR_RANGE   30L /* Program directed range */
+
+
+/* PDC PAT MEM  -- Manage memory page deallocation */
+
+#define PDC_PAT_MEM            72L
+#define PDC_PAT_MEM_PD_INFO     	0L /* Return PDT info for PD       */
+#define PDC_PAT_MEM_PD_CLEAR    	1L /* Clear PDT for PD             */
+#define PDC_PAT_MEM_PD_READ     	2L /* Read PDT entries for PD      */
+#define PDC_PAT_MEM_PD_RESET    	3L /* Reset clear bit for PD       */
+#define PDC_PAT_MEM_CELL_INFO   	5L /* Return PDT info For Cell     */
+#define PDC_PAT_MEM_CELL_CLEAR  	6L /* Clear PDT For Cell           */
+#define PDC_PAT_MEM_CELL_READ   	7L /* Read PDT entries For Cell    */
+#define PDC_PAT_MEM_CELL_RESET  	8L /* Reset clear bit For Cell     */
+#define PDC_PAT_MEM_SETGM	  	9L /* Set Golden Memory value      */
+#define PDC_PAT_MEM_ADD_PAGE    	10L /* ADDs a page to the cell      */
+#define PDC_PAT_MEM_ADDRESS     	11L /* Get Physical Location From   */
+                                    		 /* Memory Address               */
+#define PDC_PAT_MEM_GET_TXT_SIZE   	12L /* Get Formatted Text Size   */
+#define PDC_PAT_MEM_GET_PD_TXT     	13L /* Get PD Formatted Text     */
+#define PDC_PAT_MEM_GET_CELL_TXT   	14L /* Get Cell Formatted Text   */
+#define PDC_PAT_MEM_RD_STATE_INFO  	15L /* Read Mem Module State Info*/
+#define PDC_PAT_MEM_CLR_STATE_INFO 	16L /*Clear Mem Module State Info*/
+#define PDC_PAT_MEM_CLEAN_RANGE    	128L /*Clean Mem in specific range*/
+#define PDC_PAT_MEM_GET_TBL_SIZE   	131L /* Get Memory Table Size     */
+#define PDC_PAT_MEM_GET_TBL        	132L /* Get Memory Table          */
+
+
+/* PDC PAT NVOLATILE  --  Access Non-Volatile Memory */
+
+#define PDC_PAT_NVOLATILE	73L
+#define PDC_PAT_NVOLATILE_READ		0L /* Read Non-Volatile Memory   */
+#define PDC_PAT_NVOLATILE_WRITE		1L /* Write Non-Volatile Memory  */
+#define PDC_PAT_NVOLATILE_GET_SIZE	2L /* Return size of NVM         */
+#define PDC_PAT_NVOLATILE_VERIFY	3L /* Verify contents of NVM     */
+#define PDC_PAT_NVOLATILE_INIT		4L /* Initialize NVM             */
+
+/* PDC PAT PD */
+#define PDC_PAT_PD		74L         /* Protection Domain Info   */
+#define PDC_PAT_PD_GET_ADDR_MAP		0L  /* Get Address Map          */
+
+/* PDC_PAT_PD_GET_ADDR_MAP entry types */
+#define PAT_MEMORY_DESCRIPTOR		1   
+
+/* PDC_PAT_PD_GET_ADDR_MAP memory types */
+#define PAT_MEMTYPE_MEMORY		0
+#define PAT_MEMTYPE_FIRMWARE		4
+
+/* PDC_PAT_PD_GET_ADDR_MAP memory usage */
+#define PAT_MEMUSE_GENERAL		0
+#define PAT_MEMUSE_GI			128
+#define PAT_MEMUSE_GNI			129
+
+
+#ifndef __ASSEMBLY__
+#include <linux/types.h>
+
+#ifdef CONFIG_64BIT
+#define is_pdc_pat()	(PDC_TYPE_PAT == pdc_type)
+extern int pdc_pat_get_irt_size(unsigned long *num_entries, unsigned long cell_num);
+extern int pdc_pat_get_irt(void *r_addr, unsigned long cell_num);
+#else	/* ! CONFIG_64BIT */
+/* No PAT support for 32-bit kernels...sorry */
+#define is_pdc_pat()	(0)
+#define pdc_pat_get_irt_size(num_entries, cell_numn)	PDC_BAD_PROC
+#define pdc_pat_get_irt(r_addr, cell_num)		PDC_BAD_PROC
+#endif	/* ! CONFIG_64BIT */
+
+
+struct pdc_pat_cell_num {
+	unsigned long cell_num;
+	unsigned long cell_loc;
+};
+
+struct pdc_pat_cpu_num {
+	unsigned long cpu_num;
+	unsigned long cpu_loc;
+};
+
+struct pdc_pat_pd_addr_map_entry {
+	unsigned char entry_type;       /* 1 = Memory Descriptor Entry Type */
+	unsigned char reserve1[5];
+	unsigned char memory_type;
+	unsigned char memory_usage;
+	unsigned long paddr;
+	unsigned int  pages;            /* Length in 4K pages */
+	unsigned int  reserve2;
+	unsigned long cell_map;
+};
+
+/********************************************************************
+* PDC_PAT_CELL[Return Cell Module] memaddr[0] conf_base_addr
+* ----------------------------------------------------------
+* Bit  0 to 51 - conf_base_addr
+* Bit 52 to 62 - reserved
+* Bit       63 - endianess bit
+********************************************************************/
+#define PAT_GET_CBA(value) ((value) & 0xfffffffffffff000UL)
+
+/********************************************************************
+* PDC_PAT_CELL[Return Cell Module] memaddr[1] mod_info
+* ----------------------------------------------------
+* Bit  0 to  7 - entity type
+*    0 = central agent,            1 = processor,
+*    2 = memory controller,        3 = system bus adapter,
+*    4 = local bus adapter,        5 = processor bus converter,
+*    6 = crossbar fabric connect,  7 = fabric interconnect,
+*    8 to 254 reserved,            255 = unknown.
+* Bit  8 to 15 - DVI
+* Bit 16 to 23 - IOC functions
+* Bit 24 to 39 - reserved
+* Bit 40 to 63 - mod_pages
+*    number of 4K pages a module occupies starting at conf_base_addr
+********************************************************************/
+#define PAT_GET_ENTITY(value)	(((value) >> 56) & 0xffUL)
+#define PAT_GET_DVI(value)	(((value) >> 48) & 0xffUL)
+#define PAT_GET_IOC(value)	(((value) >> 40) & 0xffUL)
+#define PAT_GET_MOD_PAGES(value)(((value) & 0xffffffUL)
+
+
+/*
+** PDC_PAT_CELL_GET_INFO return block
+*/
+typedef struct pdc_pat_cell_info_rtn_block {
+	unsigned long cpu_info;
+	unsigned long cell_info;
+	unsigned long cell_location;
+	unsigned long reo_location;
+	unsigned long mem_size;
+	unsigned long dimm_status;
+	unsigned long pdc_rev;
+	unsigned long fabric_info0;
+	unsigned long fabric_info1;
+	unsigned long fabric_info2;
+	unsigned long fabric_info3;
+	unsigned long reserved[21];
+} pdc_pat_cell_info_rtn_block_t;
+
+
+/* FIXME: mod[508] should really be a union of the various mod components */
+struct pdc_pat_cell_mod_maddr_block {	/* PDC_PAT_CELL_MODULE */
+	unsigned long cba;		/* func 0 cfg space address */
+	unsigned long mod_info;		/* module information */
+	unsigned long mod_location;	/* physical location of the module */
+	struct hardware_path mod_path;	/* module path (device path - layers) */
+	unsigned long mod[508];		/* PAT cell module components */
+} __attribute__((aligned(8))) ;
+
+typedef struct pdc_pat_cell_mod_maddr_block pdc_pat_cell_mod_maddr_block_t;
+
+
+extern int pdc_pat_chassis_send_log(unsigned long status, unsigned long data);
+extern int pdc_pat_cell_get_number(struct pdc_pat_cell_num *cell_info);
+extern int pdc_pat_cell_module(unsigned long *actcnt, unsigned long ploc, unsigned long mod, unsigned long view_type, void *mem_addr);
+extern int pdc_pat_cell_num_to_loc(void *, unsigned long);
+
+extern int pdc_pat_cpu_get_number(struct pdc_pat_cpu_num *cpu_info, void *hpa);
+
+extern int pdc_pat_pd_get_addr_map(unsigned long *actual_len, void *mem_addr, unsigned long count, unsigned long offset);
+
+
+extern int pdc_pat_io_pci_cfg_read(unsigned long pci_addr, int pci_size, u32 *val); 
+extern int pdc_pat_io_pci_cfg_write(unsigned long pci_addr, int pci_size, u32 val); 
+
+
+/* Flag to indicate this is a PAT box...don't use this unless you
+** really have to...it might go away some day.
+*/
+extern int pdc_pat;     /* arch/parisc/kernel/inventory.c */
+
+/********************************************************************
+* PDC_PAT_CELL[Return Cell Module] memaddr[0] conf_base_addr
+* ----------------------------------------------------------
+* Bit  0 to 51 - conf_base_addr
+* Bit 52 to 62 - reserved
+* Bit       63 - endianess bit
+********************************************************************/
+#define PAT_GET_CBA(value) ((value) & 0xfffffffffffff000UL)
+
+/********************************************************************
+* PDC_PAT_CELL[Return Cell Module] memaddr[1] mod_info
+* ----------------------------------------------------
+* Bit  0 to  7 - entity type
+*    0 = central agent,            1 = processor,
+*    2 = memory controller,        3 = system bus adapter,
+*    4 = local bus adapter,        5 = processor bus converter,
+*    6 = crossbar fabric connect,  7 = fabric interconnect,
+*    8 to 254 reserved,            255 = unknown.
+* Bit  8 to 15 - DVI
+* Bit 16 to 23 - IOC functions
+* Bit 24 to 39 - reserved
+* Bit 40 to 63 - mod_pages
+*    number of 4K pages a module occupies starting at conf_base_addr
+********************************************************************/
+#define PAT_GET_ENTITY(value)	(((value) >> 56) & 0xffUL)
+#define PAT_GET_DVI(value)	(((value) >> 48) & 0xffUL)
+#define PAT_GET_IOC(value)	(((value) >> 40) & 0xffUL)
+#define PAT_GET_MOD_PAGES(value)(((value) & 0xffffffUL)
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* ! __PARISC_PATPDC_H */