Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/include/asm-ppc/heathrow.h b/include/asm-ppc/heathrow.h
new file mode 100644
index 0000000..22ac179
--- /dev/null
+++ b/include/asm-ppc/heathrow.h
@@ -0,0 +1,62 @@
+/*
+ * heathrow.h: definitions for using the "Heathrow" I/O controller chip.
+ *
+ * Grabbed from Open Firmware definitions on a PowerBook G3 Series
+ *
+ * Copyright (C) 1997 Paul Mackerras.
+ */
+
+/* Front light color on Yikes/B&W G3. 32 bits */
+#define HEATHROW_FRONT_LIGHT 0x32 /* (set to 0 or 0xffffffff) */
+
+/* Brightness/contrast (gossamer iMac ?). 8 bits */
+#define HEATHROW_BRIGHTNESS_CNTL 0x32
+#define HEATHROW_CONTRAST_CNTL 0x33
+
+/* offset from ohare base for feature control register */
+#define HEATHROW_MBCR 0x34 /* Media bay control */
+#define HEATHROW_FCR 0x38 /* Feature control */
+#define HEATHROW_AUX_CNTL_REG 0x3c /* Aux control */
+
+/*
+ * Bits in feature control register.
+ * Bits postfixed with a _N are in inverse logic
+ */
+#define HRW_SCC_TRANS_EN_N 0x00000001 /* Also controls modem power */
+#define HRW_BAY_POWER_N 0x00000002
+#define HRW_BAY_PCI_ENABLE 0x00000004
+#define HRW_BAY_IDE_ENABLE 0x00000008
+#define HRW_BAY_FLOPPY_ENABLE 0x00000010
+#define HRW_IDE0_ENABLE 0x00000020
+#define HRW_IDE0_RESET_N 0x00000040
+#define HRW_BAY_DEV_MASK 0x0000001c
+#define HRW_BAY_RESET_N 0x00000080
+#define HRW_IOBUS_ENABLE 0x00000100 /* Internal IDE ? */
+#define HRW_SCC_ENABLE 0x00000200
+#define HRW_MESH_ENABLE 0x00000400
+#define HRW_SWIM_ENABLE 0x00000800
+#define HRW_SOUND_POWER_N 0x00001000
+#define HRW_SOUND_CLK_ENABLE 0x00002000
+#define HRW_SCCA_IO 0x00004000
+#define HRW_SCCB_IO 0x00008000
+#define HRW_PORT_OR_DESK_VIA_N 0x00010000 /* This one is 0 on PowerBook */
+#define HRW_PWM_MON_ID_N 0x00020000 /* ??? (0) */
+#define HRW_HOOK_MB_CNT_N 0x00040000 /* ??? (0) */
+#define HRW_SWIM_CLONE_FLOPPY 0x00080000 /* ??? (0) */
+#define HRW_AUD_RUN22 0x00100000 /* ??? (1) */
+#define HRW_SCSI_LINK_MODE 0x00200000 /* Read ??? (1) */
+#define HRW_ARB_BYPASS 0x00400000 /* Disable internal PCI arbitrer */
+#define HRW_IDE1_RESET_N 0x00800000 /* Media bay */
+#define HRW_SLOW_SCC_PCLK 0x01000000 /* ??? (0) */
+#define HRW_RESET_SCC 0x02000000
+#define HRW_MFDC_CELL_ENABLE 0x04000000 /* ??? (0) */
+#define HRW_USE_MFDC 0x08000000 /* ??? (0) */
+#define HRW_BMAC_IO_ENABLE 0x60000000 /* two bits, not documented in OF */
+#define HRW_BMAC_RESET 0x80000000 /* not documented in OF */
+
+/* We OR those features at boot on desktop G3s */
+#define HRW_DEFAULTS (HRW_SCCA_IO | HRW_SCCB_IO | HRW_SCC_ENABLE)
+
+/* Looks like Heathrow has some sort of GPIOs as well... */
+#define HRW_GPIO_MODEM_RESET 0x6d
+