Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/include/asm-sparc/cache.h b/include/asm-sparc/cache.h
new file mode 100644
index 0000000..e6316fd
--- /dev/null
+++ b/include/asm-sparc/cache.h
@@ -0,0 +1,130 @@
+/* $Id: cache.h,v 1.9 1999/08/14 03:51:58 anton Exp $
+ * cache.h: Cache specific code for the Sparc. These include flushing
+ * and direct tag/data line access.
+ *
+ * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
+ */
+
+#ifndef _SPARC_CACHE_H
+#define _SPARC_CACHE_H
+
+#include <asm/asi.h>
+
+#define L1_CACHE_SHIFT 5
+#define L1_CACHE_BYTES 32
+#define L1_CACHE_ALIGN(x) ((((x)+(L1_CACHE_BYTES-1))&~(L1_CACHE_BYTES-1)))
+#define L1_CACHE_SHIFT_MAX 5 /* largest L1 which this arch supports */
+
+#define SMP_CACHE_BYTES 32
+
+/* Direct access to the instruction cache is provided through and
+ * alternate address space. The IDC bit must be off in the ICCR on
+ * HyperSparcs for these accesses to work. The code below does not do
+ * any checking, the caller must do so. These routines are for
+ * diagnostics only, but could end up being useful. Use with care.
+ * Also, you are asking for trouble if you execute these in one of the
+ * three instructions following a %asr/%psr access or modification.
+ */
+
+/* First, cache-tag access. */
+extern __inline__ unsigned int get_icache_tag(int setnum, int tagnum)
+{
+ unsigned int vaddr, retval;
+
+ vaddr = ((setnum&1) << 12) | ((tagnum&0x7f) << 5);
+ __asm__ __volatile__("lda [%1] %2, %0\n\t" :
+ "=r" (retval) :
+ "r" (vaddr), "i" (ASI_M_TXTC_TAG));
+ return retval;
+}
+
+extern __inline__ void put_icache_tag(int setnum, int tagnum, unsigned int entry)
+{
+ unsigned int vaddr;
+
+ vaddr = ((setnum&1) << 12) | ((tagnum&0x7f) << 5);
+ __asm__ __volatile__("sta %0, [%1] %2\n\t" : :
+ "r" (entry), "r" (vaddr), "i" (ASI_M_TXTC_TAG) :
+ "memory");
+}
+
+/* Second cache-data access. The data is returned two-32bit quantities
+ * at a time.
+ */
+extern __inline__ void get_icache_data(int setnum, int tagnum, int subblock,
+ unsigned int *data)
+{
+ unsigned int value1, value2, vaddr;
+
+ vaddr = ((setnum&0x1) << 12) | ((tagnum&0x7f) << 5) |
+ ((subblock&0x3) << 3);
+ __asm__ __volatile__("ldda [%2] %3, %%g2\n\t"
+ "or %%g0, %%g2, %0\n\t"
+ "or %%g0, %%g3, %1\n\t" :
+ "=r" (value1), "=r" (value2) :
+ "r" (vaddr), "i" (ASI_M_TXTC_DATA) :
+ "g2", "g3");
+ data[0] = value1; data[1] = value2;
+}
+
+extern __inline__ void put_icache_data(int setnum, int tagnum, int subblock,
+ unsigned int *data)
+{
+ unsigned int value1, value2, vaddr;
+
+ vaddr = ((setnum&0x1) << 12) | ((tagnum&0x7f) << 5) |
+ ((subblock&0x3) << 3);
+ value1 = data[0]; value2 = data[1];
+ __asm__ __volatile__("or %%g0, %0, %%g2\n\t"
+ "or %%g0, %1, %%g3\n\t"
+ "stda %%g2, [%2] %3\n\t" : :
+ "r" (value1), "r" (value2),
+ "r" (vaddr), "i" (ASI_M_TXTC_DATA) :
+ "g2", "g3", "memory" /* no joke */);
+}
+
+/* Different types of flushes with the ICACHE. Some of the flushes
+ * affect both the ICACHE and the external cache. Others only clear
+ * the ICACHE entries on the cpu itself. V8's (most) allow
+ * granularity of flushes on the packet (element in line), whole line,
+ * and entire cache (ie. all lines) level. The ICACHE only flushes are
+ * ROSS HyperSparc specific and are in ross.h
+ */
+
+/* Flushes which clear out both the on-chip and external caches */
+extern __inline__ void flush_ei_page(unsigned int addr)
+{
+ __asm__ __volatile__("sta %%g0, [%0] %1\n\t" : :
+ "r" (addr), "i" (ASI_M_FLUSH_PAGE) :
+ "memory");
+}
+
+extern __inline__ void flush_ei_seg(unsigned int addr)
+{
+ __asm__ __volatile__("sta %%g0, [%0] %1\n\t" : :
+ "r" (addr), "i" (ASI_M_FLUSH_SEG) :
+ "memory");
+}
+
+extern __inline__ void flush_ei_region(unsigned int addr)
+{
+ __asm__ __volatile__("sta %%g0, [%0] %1\n\t" : :
+ "r" (addr), "i" (ASI_M_FLUSH_REGION) :
+ "memory");
+}
+
+extern __inline__ void flush_ei_ctx(unsigned int addr)
+{
+ __asm__ __volatile__("sta %%g0, [%0] %1\n\t" : :
+ "r" (addr), "i" (ASI_M_FLUSH_CTX) :
+ "memory");
+}
+
+extern __inline__ void flush_ei_user(unsigned int addr)
+{
+ __asm__ __volatile__("sta %%g0, [%0] %1\n\t" : :
+ "r" (addr), "i" (ASI_M_FLUSH_USER) :
+ "memory");
+}
+
+#endif /* !(_SPARC_CACHE_H) */