Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
diff --git a/include/asm-v850/entry.h b/include/asm-v850/entry.h
new file mode 100644
index 0000000..d9df8ac
--- /dev/null
+++ b/include/asm-v850/entry.h
@@ -0,0 +1,113 @@
+/*
+ * include/asm-v850/entry.h -- Definitions used by low-level trap handlers
+ *
+ * Copyright (C) 2001,02,03 NEC Electronics Corporation
+ * Copyright (C) 2001,02,03 Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef __V850_ENTRY_H__
+#define __V850_ENTRY_H__
+
+
+#include <asm/ptrace.h>
+#include <asm/machdep.h>
+
+
+/* These are special variables using by the kernel trap/interrupt code
+ to save registers in, at a time when there are no spare registers we
+ can use to do so, and we can't depend on the value of the stack
+ pointer. This means that they must be within a signed 16-bit
+ displacement of 0x00000000. */
+
+#define KERNEL_VAR_SPACE_ADDR R0_RAM_ADDR
+
+#ifdef __ASSEMBLY__
+#define KERNEL_VAR(addr) addr[r0]
+#else
+#define KERNEL_VAR(addr) (*(volatile unsigned long *)(addr))
+#endif
+
+/* Kernel stack pointer, 4 bytes. */
+#define KSP_ADDR (KERNEL_VAR_SPACE_ADDR + 0)
+#define KSP KERNEL_VAR (KSP_ADDR)
+/* 1 if in kernel-mode, 0 if in user mode, 1 byte. */
+#define KM_ADDR (KERNEL_VAR_SPACE_ADDR + 4)
+#define KM KERNEL_VAR (KM_ADDR)
+/* Temporary storage for interrupt handlers, 4 bytes. */
+#define INT_SCRATCH_ADDR (KERNEL_VAR_SPACE_ADDR + 8)
+#define INT_SCRATCH KERNEL_VAR (INT_SCRATCH_ADDR)
+/* Where the stack-pointer is saved when jumping to various sorts of
+ interrupt handlers. ENTRY_SP is used by everything except NMIs,
+ which have their own location. Higher-priority NMIs can clobber the
+ value written by a lower priority NMI, since they can't be disabled,
+ but that's OK, because only NMI0 (the lowest-priority one) is allowed
+ to return. */
+#define ENTRY_SP_ADDR (KERNEL_VAR_SPACE_ADDR + 12)
+#define ENTRY_SP KERNEL_VAR (ENTRY_SP_ADDR)
+#define NMI_ENTRY_SP_ADDR (KERNEL_VAR_SPACE_ADDR + 16)
+#define NMI_ENTRY_SP KERNEL_VAR (NMI_ENTRY_SP_ADDR)
+
+#ifdef CONFIG_RESET_GUARD
+/* Used to detect unexpected resets (since the v850 has no MMU, any call
+ through a null pointer will jump to the reset vector). We detect
+ such resets by checking for a magic value, RESET_GUARD_ACTIVE, in
+ this location. Properly resetting the machine stores zero there, so
+ it shouldn't trigger the guard; the power-on value is uncertain, but
+ it's unlikely to be RESET_GUARD_ACTIVE. */
+#define RESET_GUARD_ADDR (KERNEL_VAR_SPACE_ADDR + 28)
+#define RESET_GUARD KERNEL_VAR (RESET_GUARD_ADDR)
+#define RESET_GUARD_ACTIVE 0xFAB4BEEF
+#endif /* CONFIG_RESET_GUARD */
+
+#ifdef CONFIG_V850E_HIGHRES_TIMER
+#define HIGHRES_TIMER_SLOW_TICKS_ADDR (KERNEL_VAR_SPACE_ADDR + 32)
+#define HIGHRES_TIMER_SLOW_TICKS KERNEL_VAR (HIGHRES_TIMER_SLOW_TICKS_ADDR)
+#endif /* CONFIG_V850E_HIGHRES_TIMER */
+
+#ifndef __ASSEMBLY__
+
+#ifdef CONFIG_RESET_GUARD
+/* Turn off reset guard, so that resetting the machine works normally.
+ This should be called in the various machine_halt, etc., functions. */
+static inline void disable_reset_guard (void)
+{
+ RESET_GUARD = 0;
+}
+#endif /* CONFIG_RESET_GUARD */
+
+#endif /* !__ASSEMBLY__ */
+
+
+/* A `state save frame' is a struct pt_regs preceded by some extra space
+ suitable for a function call stack frame. */
+
+/* Amount of room on the stack reserved for arguments and to satisfy the
+ C calling conventions, in addition to the space used by the struct
+ pt_regs that actually holds saved values. */
+#define STATE_SAVE_ARG_SPACE (6*4) /* Up to six arguments. */
+
+
+#ifdef __ASSEMBLY__
+
+/* The size of a state save frame. */
+#define STATE_SAVE_SIZE (PT_SIZE + STATE_SAVE_ARG_SPACE)
+
+#else /* !__ASSEMBLY__ */
+
+/* The size of a state save frame. */
+#define STATE_SAVE_SIZE (sizeof (struct pt_regs) + STATE_SAVE_ARG_SPACE)
+
+#endif /* __ASSEMBLY__ */
+
+
+/* Offset of the struct pt_regs in a state save frame. */
+#define STATE_SAVE_PT_OFFSET STATE_SAVE_ARG_SPACE
+
+
+#endif /* __V850_ENTRY_H__ */