diff --git a/include/asm-v850/a.out.h b/include/asm-v850/a.out.h
new file mode 100644
index 0000000..e9439a0
--- /dev/null
+++ b/include/asm-v850/a.out.h
@@ -0,0 +1,21 @@
+#ifndef __V850_A_OUT_H__
+#define __V850_A_OUT_H__
+
+struct exec
+{
+  unsigned long a_info;		/* Use macros N_MAGIC, etc for access */
+  unsigned a_text;		/* length of text, in bytes */
+  unsigned a_data;		/* length of data, in bytes */
+  unsigned a_bss;		/* length of uninitialized data area for file, in bytes */
+  unsigned a_syms;		/* length of symbol table data in file, in bytes */
+  unsigned a_entry;		/* start address */
+  unsigned a_trsize;		/* length of relocation info for text, in bytes */
+  unsigned a_drsize;		/* length of relocation info for data, in bytes */
+};
+
+#define N_TRSIZE(a)	((a).a_trsize)
+#define N_DRSIZE(a)	((a).a_drsize)
+#define N_SYMSIZE(a)	((a).a_syms)
+
+
+#endif /* __V850_A_OUT_H__ */
diff --git a/include/asm-v850/anna.h b/include/asm-v850/anna.h
new file mode 100644
index 0000000..3be77d5
--- /dev/null
+++ b/include/asm-v850/anna.h
@@ -0,0 +1,143 @@
+/*
+ * include/asm-v850/anna.h -- Anna V850E2 evaluation cpu chip/board
+ *
+ *  Copyright (C) 2001,02,03  NEC Electronics Corporation
+ *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef __V850_ANNA_H__
+#define __V850_ANNA_H__
+
+#include <asm/v850e2.h>		/* Based on V850E2 core.  */
+
+
+#define CPU_MODEL	"v850e2/anna"
+#define CPU_MODEL_LONG	"NEC V850E2/Anna"
+#define PLATFORM	"anna"
+#define PLATFORM_LONG	"NEC/Midas lab V850E2/Anna evaluation board"
+
+#define CPU_CLOCK_FREQ	200000000 /*  200MHz */
+#define SYS_CLOCK_FREQ	 33300000 /* 33.3MHz */
+
+
+/* 1MB of static RAM.  This memory is mirrored 64 times.  */
+#define SRAM_ADDR	0x04000000
+#define SRAM_SIZE	0x00100000 /* 1MB */
+/* 64MB of DRAM.  */
+#define SDRAM_ADDR	0x08000000	
+#define SDRAM_SIZE	0x04000000 /* 64MB */
+
+
+/* For <asm/page.h> */
+#define PAGE_OFFSET 	SRAM_ADDR
+
+/* We use on-chip RAM, for a few miscellaneous variables that must be
+   accessible using a load instruction relative to R0.  The Anna chip has
+   128K of `dLB' ram nominally located at 0xFFF00000, but it's mirrored
+   every 128K, so we can use the `last mirror' (except for the portion at
+   the top which is overridden by I/O space).  In addition, the early
+   sample chip we're using has lots of memory errors in the dLB ram, so we
+   use a specially chosen location that has at least 20 bytes of contiguous
+   valid memory (xxxF0020 - xxxF003F).  */
+#define R0_RAM_ADDR			0xFFFF8020
+
+
+/* Anna specific control registers.  */
+#define ANNA_ILBEN_ADDR			0xFFFFF7F2
+#define ANNA_ILBEN			(*(volatile u16 *)ANNA_ILBEN_ADDR)
+
+
+/* I/O port P0-P3. */
+/* Direct I/O.  Bits 0-7 are pins Pn0-Pn7.  */
+#define ANNA_PORT_IO_ADDR(n)		(0xFFFFF400 + (n) * 2)
+#define ANNA_PORT_IO(n)			(*(volatile u8 *)ANNA_PORT_IO_ADDR(n))
+/* Port mode (for direct I/O, 0 = output, 1 = input).  */
+#define ANNA_PORT_PM_ADDR(n)		(0xFFFFF410 + (n) * 2)
+#define ANNA_PORT_PM(n)			(*(volatile u8 *)ANNA_PORT_PM_ADDR(n))
+
+
+/* Hardware-specific interrupt numbers (in the kernel IRQ namespace).  */
+#define IRQ_INTP(n)	(n)	/* Pnnn (pin) interrupts 0-15 */
+#define IRQ_INTP_NUM	16
+#define IRQ_INTOV(n)	(0x10 + (n)) /* 0-2 */
+#define IRQ_INTOV_NUM	2
+#define IRQ_INTCCC(n)	(0x12 + (n))
+#define IRQ_INTCCC_NUM	4
+#define IRQ_INTCMD(n)	(0x16 + (n)) /* interval timer interrupts 0-5 */
+#define IRQ_INTCMD_NUM	6
+#define IRQ_INTDMA(n)	(0x1C + (n)) /* DMA interrupts 0-3 */
+#define IRQ_INTDMA_NUM	4
+#define IRQ_INTDMXER	0x20
+#define IRQ_INTSRE(n)	(0x21 + (n)*3) /* UART 0-1 reception error */
+#define IRQ_INTSRE_NUM	2
+#define IRQ_INTSR(n)	(0x22 + (n)*3) /* UART 0-1 reception completion */
+#define IRQ_INTSR_NUM	2
+#define IRQ_INTST(n)	(0x23 + (n)*3) /* UART 0-1 transmission completion */
+#define IRQ_INTST_NUM	2
+
+#define NUM_CPU_IRQS	64
+
+#ifndef __ASSEMBLY__
+/* Initialize chip interrupts.  */
+extern void anna_init_irqs (void);
+#endif
+
+
+/* Anna UART details (basically the same as the V850E/MA1, but 2 channels).  */
+#define V850E_UART_NUM_CHANNELS		2
+#define V850E_UART_BASE_FREQ		(SYS_CLOCK_FREQ / 2)
+#define V850E_UART_CHIP_NAME 		"V850E2/NA85E2A"
+
+/* This is the UART channel that's actually connected on the board.  */
+#define V850E_UART_CONSOLE_CHANNEL	1
+
+/* This is a function that gets called before configuring the UART.  */
+#define V850E_UART_PRE_CONFIGURE	anna_uart_pre_configure
+#ifndef __ASSEMBLY__
+extern void anna_uart_pre_configure (unsigned chan,
+				     unsigned cflags, unsigned baud);
+#endif
+
+/* This board supports RTS/CTS for the on-chip UART, but only for channel 1. */
+
+/* CTS for UART channel 1 is pin P37 (bit 7 of port 3).  */
+#define V850E_UART_CTS(chan)	((chan) == 1 ? !(ANNA_PORT_IO(3) & 0x80) : 1)
+/* RTS for UART channel 1 is pin P07 (bit 7 of port 0).  */
+#define V850E_UART_SET_RTS(chan, val)					      \
+   do {									      \
+	   if (chan == 1) {						      \
+		   unsigned old = ANNA_PORT_IO(0); 			      \
+		   if (val)						      \
+			   ANNA_PORT_IO(0) = old & ~0x80;		      \
+		   else							      \
+			   ANNA_PORT_IO(0) = old | 0x80;		      \
+	   }								      \
+   } while (0)
+
+
+/* Timer C details.  */
+#define V850E_TIMER_C_BASE_ADDR		0xFFFFF600
+
+/* Timer D details (the Anna actually has 5 of these; should change later). */
+#define V850E_TIMER_D_BASE_ADDR		0xFFFFF540
+#define V850E_TIMER_D_TMD_BASE_ADDR 	(V850E_TIMER_D_BASE_ADDR + 0x0)
+#define V850E_TIMER_D_CMD_BASE_ADDR 	(V850E_TIMER_D_BASE_ADDR + 0x2)
+#define V850E_TIMER_D_TMCD_BASE_ADDR 	(V850E_TIMER_D_BASE_ADDR + 0x4)
+
+#define V850E_TIMER_D_BASE_FREQ		SYS_CLOCK_FREQ
+#define V850E_TIMER_D_TMCD_CS_MIN	1 /* min 2^1 divider */
+
+
+/* For <asm/param.h> */
+#ifndef HZ
+#define HZ	100
+#endif
+
+
+#endif /* __V850_ANNA_H__ */
diff --git a/include/asm-v850/as85ep1.h b/include/asm-v850/as85ep1.h
new file mode 100644
index 0000000..659bc910
--- /dev/null
+++ b/include/asm-v850/as85ep1.h
@@ -0,0 +1,158 @@
+/*
+ * include/asm-v850/as85ep1.h -- AS85EP1 evaluation CPU chip/board
+ *
+ *  Copyright (C) 2001,02,03  NEC Electronics Corporation
+ *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef __V850_AS85EP1_H__
+#define __V850_AS85EP1_H__
+
+#include <asm/v850e.h>
+
+
+#define CPU_MODEL	"as85ep1"
+#define CPU_MODEL_LONG	"NEC V850E/AS85EP1"
+#define PLATFORM	"AS85EP1"
+#define PLATFORM_LONG	"NEC V850E/AS85EP1 evaluation board"
+
+#define CPU_CLOCK_FREQ	96000000 /*  96MHz */
+#define SYS_CLOCK_FREQ	CPU_CLOCK_FREQ
+
+
+/* 1MB of static RAM.  */
+#define SRAM_ADDR	0x00400000
+#define SRAM_SIZE	0x00100000 /* 1MB */
+/* About 58MB of DRAM.  This can actually be at one of two positions,
+   determined by jump JP3; we have to use the first position because the
+   second is partially out of processor instruction addressing range
+   (though in the second position there's actually 64MB available).  */
+#define SDRAM_ADDR	0x00600000
+#define SDRAM_SIZE	0x039F8000 /* approx 58MB */
+
+/* For <asm/page.h> */
+#define PAGE_OFFSET 	SRAM_ADDR
+
+/* We use on-chip RAM, for a few miscellaneous variables that must be
+   accessible using a load instruction relative to R0.  The AS85EP1 chip
+   16K of internal RAM located slightly before I/O space.  */
+#define R0_RAM_ADDR	0xFFFF8000
+
+
+/* AS85EP1 specific control registers.  */
+#define AS85EP1_CSC_ADDR(n)	(0xFFFFF060 + (n) * 2)
+#define AS85EP1_CSC(n)		(*(volatile u16 *)AS85EP1_CSC_ADDR(n))
+#define AS85EP1_BSC_ADDR	0xFFFFF066
+#define AS85EP1_BSC		(*(volatile u16 *)AS85EP1_BSC_ADDR)
+#define AS85EP1_BCT_ADDR(n)	(0xFFFFF480 + (n) * 2)
+#define AS85EP1_BCT(n)		(*(volatile u16 *)AS85EP1_BCT_ADDR(n))
+#define AS85EP1_DWC_ADDR(n)	(0xFFFFF484 + (n) * 2)
+#define AS85EP1_DWC(n)		(*(volatile u16 *)AS85EP1_DWC_ADDR(n))
+#define AS85EP1_BCC_ADDR	0xFFFFF488
+#define AS85EP1_BCC		(*(volatile u16 *)AS85EP1_BCC_ADDR)
+#define AS85EP1_ASC_ADDR	0xFFFFF48A
+#define AS85EP1_ASC		(*(volatile u16 *)AS85EP1_ASC_ADDR)
+#define AS85EP1_BCP_ADDR	0xFFFFF48C
+#define AS85EP1_BCP		(*(volatile u16 *)AS85EP1_BCP_ADDR)
+#define AS85EP1_LBS_ADDR	0xFFFFF48E
+#define AS85EP1_LBS		(*(volatile u16 *)AS85EP1_LBS_ADDR)
+#define AS85EP1_BMC_ADDR	0xFFFFF498
+#define AS85EP1_BMC		(*(volatile u16 *)AS85EP1_BMC_ADDR)
+#define AS85EP1_PRC_ADDR	0xFFFFF49A
+#define AS85EP1_PRC		(*(volatile u16 *)AS85EP1_PRC_ADDR)
+#define AS85EP1_SCR_ADDR(n)	(0xFFFFF4A0 + (n) * 4)
+#define AS85EP1_SCR(n)		(*(volatile u16 *)AS85EP1_SCR_ADDR(n))
+#define AS85EP1_RFS_ADDR(n)	(0xFFFFF4A2 + (n) * 4)
+#define AS85EP1_RFS(n)		(*(volatile u16 *)AS85EP1_RFS_ADDR(n))
+#define AS85EP1_IRAMM_ADDR	0xFFFFF80A
+#define AS85EP1_IRAMM		(*(volatile u8 *)AS85EP1_IRAMM_ADDR)
+
+
+
+/* I/O port P0-P13. */
+/* Direct I/O.  Bits 0-7 are pins Pn0-Pn7.  */
+#define AS85EP1_PORT_IO_ADDR(n)	(0xFFFFF400 + (n) * 2)
+#define AS85EP1_PORT_IO(n)	(*(volatile u8 *)AS85EP1_PORT_IO_ADDR(n))
+/* Port mode (for direct I/O, 0 = output, 1 = input).  */
+#define AS85EP1_PORT_PM_ADDR(n)	(0xFFFFF420 + (n) * 2)
+#define AS85EP1_PORT_PM(n)	(*(volatile u8 *)AS85EP1_PORT_PM_ADDR(n))
+/* Port mode control (0 = direct I/O mode, 1 = alternative I/O mode).  */
+#define AS85EP1_PORT_PMC_ADDR(n) (0xFFFFF440 + (n) * 2)
+#define AS85EP1_PORT_PMC(n)	(*(volatile u8 *)AS85EP1_PORT_PMC_ADDR(n))
+
+
+/* Hardware-specific interrupt numbers (in the kernel IRQ namespace).  */
+#define IRQ_INTCCC(n)	(0x0C + (n))
+#define IRQ_INTCCC_NUM	8
+#define IRQ_INTCMD(n)	(0x14 + (n)) /* interval timer interrupts 0-5 */
+#define IRQ_INTCMD_NUM	6
+#define IRQ_INTSRE(n)	(0x1E + (n)*3) /* UART 0-1 reception error */
+#define IRQ_INTSRE_NUM	2
+#define IRQ_INTSR(n)	(0x1F + (n)*3) /* UART 0-1 reception completion */
+#define IRQ_INTSR_NUM	2
+#define IRQ_INTST(n)	(0x20 + (n)*3) /* UART 0-1 transmission completion */
+#define IRQ_INTST_NUM	2
+
+#define NUM_CPU_IRQS	64
+
+#ifndef __ASSEMBLY__
+/* Initialize chip interrupts.  */
+extern void as85ep1_init_irqs (void);
+#endif
+
+
+/* AS85EP1 UART details (basically the same as the V850E/MA1, but 2 channels).  */
+#define V850E_UART_NUM_CHANNELS		2
+#define V850E_UART_BASE_FREQ		(SYS_CLOCK_FREQ / 4)
+#define V850E_UART_CHIP_NAME 		"V850E/NA85E"
+
+/* This is a function that gets called before configuring the UART.  */
+#define V850E_UART_PRE_CONFIGURE	as85ep1_uart_pre_configure
+#ifndef __ASSEMBLY__
+extern void as85ep1_uart_pre_configure (unsigned chan,
+					unsigned cflags, unsigned baud);
+#endif
+
+/* This board supports RTS/CTS for the on-chip UART, but only for channel 1. */
+
+/* CTS for UART channel 1 is pin P54 (bit 4 of port 5).  */
+#define V850E_UART_CTS(chan)   ((chan) == 1 ? !(AS85EP1_PORT_IO(5) & 0x10) : 1)
+/* RTS for UART channel 1 is pin P53 (bit 3 of port 5).  */
+#define V850E_UART_SET_RTS(chan, val)					      \
+   do {									      \
+	   if (chan == 1) {						      \
+		   unsigned old = AS85EP1_PORT_IO(5); 			      \
+		   if (val)						      \
+			   AS85EP1_PORT_IO(5) = old & ~0x8;		      \
+		   else							      \
+			   AS85EP1_PORT_IO(5) = old | 0x8;		      \
+	   }								      \
+   } while (0)
+
+
+/* Timer C details.  */
+#define V850E_TIMER_C_BASE_ADDR		0xFFFFF600
+
+/* Timer D details (the AS85EP1 actually has 5 of these; should change later). */
+#define V850E_TIMER_D_BASE_ADDR		0xFFFFF540
+#define V850E_TIMER_D_TMD_BASE_ADDR 	(V850E_TIMER_D_BASE_ADDR + 0x0)
+#define V850E_TIMER_D_CMD_BASE_ADDR 	(V850E_TIMER_D_BASE_ADDR + 0x2)
+#define V850E_TIMER_D_TMCD_BASE_ADDR 	(V850E_TIMER_D_BASE_ADDR + 0x4)
+
+#define V850E_TIMER_D_BASE_FREQ		SYS_CLOCK_FREQ
+#define V850E_TIMER_D_TMCD_CS_MIN	2 /* min 2^2 divider */
+
+
+/* For <asm/param.h> */
+#ifndef HZ
+#define HZ	100
+#endif
+
+
+#endif /* __V850_AS85EP1_H__ */
diff --git a/include/asm-v850/asm.h b/include/asm-v850/asm.h
new file mode 100644
index 0000000..bf1e785
--- /dev/null
+++ b/include/asm-v850/asm.h
@@ -0,0 +1,32 @@
+/*
+ * include/asm-v850/asm.h -- Macros for writing assembly code
+ *
+ *  Copyright (C) 2001,02,03  NEC Electronics Corporation
+ *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#define G_ENTRY(name)							      \
+   .balign 4;								      \
+   .globl name;								      \
+   .type  name,@function;						      \
+   name
+#define G_DATA(name)							      \
+   .globl name;								      \
+   .type  name,@object;							      \
+   name
+#define END(name)							      \
+   .size  name,.-name
+
+#define L_ENTRY(name)							      \
+   .balign 4;								      \
+   .type  name,@function;						      \
+   name
+#define L_DATA(name)							      \
+   .type  name,@object;							      \
+   name
diff --git a/include/asm-v850/atomic.h b/include/asm-v850/atomic.h
new file mode 100644
index 0000000..8284aa7
--- /dev/null
+++ b/include/asm-v850/atomic.h
@@ -0,0 +1,99 @@
+/*
+ * include/asm-v850/atomic.h -- Atomic operations
+ *
+ *  Copyright (C) 2001,02  NEC Corporation
+ *  Copyright (C) 2001,02  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef __V850_ATOMIC_H__
+#define __V850_ATOMIC_H__
+
+#include <linux/config.h>
+
+#include <asm/system.h>
+
+#ifdef CONFIG_SMP
+#error SMP not supported
+#endif
+
+typedef struct { int counter; } atomic_t;
+
+#define ATOMIC_INIT(i)	{ (i) }
+
+#ifdef __KERNEL__
+
+#define atomic_read(v)		((v)->counter)
+#define atomic_set(v,i)		(((v)->counter) = (i))
+
+extern __inline__ int atomic_add_return (int i, volatile atomic_t *v)
+{
+	unsigned long flags;
+	int res;
+
+	local_irq_save (flags);
+	res = v->counter + i;
+	v->counter = res;
+	local_irq_restore (flags);
+
+	return res;
+}
+
+static __inline__ int atomic_sub_return (int i, volatile atomic_t *v)
+{
+	unsigned long flags;
+	int res;
+
+	local_irq_save (flags);
+	res = v->counter - i;
+	v->counter = res;
+	local_irq_restore (flags);
+
+	return res;
+}
+
+static __inline__ void atomic_clear_mask (unsigned long mask, unsigned long *addr)
+{
+	unsigned long flags;
+
+	local_irq_save (flags);
+	*addr &= ~mask;
+	local_irq_restore (flags);
+}
+
+#endif
+
+#define atomic_add(i, v)	atomic_add_return ((i), (v))
+#define atomic_sub(i, v)	atomic_sub_return ((i), (v))
+
+#define atomic_dec_return(v)	atomic_sub_return (1, (v))
+#define atomic_inc_return(v)	atomic_add_return (1, (v))
+#define atomic_inc(v) 		atomic_inc_return (v)
+#define atomic_dec(v) 		atomic_dec_return (v)
+
+/*
+ * atomic_inc_and_test - increment and test
+ * @v: pointer of type atomic_t
+ *
+ * Atomically increments @v by 1
+ * and returns true if the result is zero, or false for all
+ * other cases.
+ */
+#define atomic_inc_and_test(v) (atomic_inc_return(v) == 0)
+
+#define atomic_sub_and_test(i,v)	(atomic_sub_return ((i), (v)) == 0)
+#define atomic_dec_and_test(v)		(atomic_sub_return (1, (v)) == 0)
+#define atomic_add_negative(i,v)	(atomic_add_return ((i), (v)) < 0)
+
+/* Atomic operations are already serializing on ARM */
+#define smp_mb__before_atomic_dec()	barrier()
+#define smp_mb__after_atomic_dec()	barrier()
+#define smp_mb__before_atomic_inc()	barrier()
+#define smp_mb__after_atomic_inc()	barrier()
+
+#endif /* __V850_ATOMIC_H__ */
diff --git a/include/asm-v850/bitops.h b/include/asm-v850/bitops.h
new file mode 100644
index 0000000..7c4ecaf
--- /dev/null
+++ b/include/asm-v850/bitops.h
@@ -0,0 +1,355 @@
+/*
+ * include/asm-v850/bitops.h -- Bit operations
+ *
+ *  Copyright (C) 2001,02,03,04  NEC Electronics Corporation
+ *  Copyright (C) 2001,02,03,04  Miles Bader <miles@gnu.org>
+ *  Copyright (C) 1992  Linus Torvalds.
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ */
+
+#ifndef __V850_BITOPS_H__
+#define __V850_BITOPS_H__
+
+
+#include <linux/config.h>
+#include <linux/compiler.h>	/* unlikely  */
+#include <asm/byteorder.h>	/* swab32 */
+#include <asm/system.h>		/* interrupt enable/disable */
+
+
+#ifdef __KERNEL__
+
+/*
+ * The __ functions are not atomic
+ */
+
+/*
+ * ffz = Find First Zero in word. Undefined if no zero exists,
+ * so code should check against ~0UL first..
+ */
+extern __inline__ unsigned long ffz (unsigned long word)
+{
+	unsigned long result = 0;
+
+	while (word & 1) {
+		result++;
+		word >>= 1;
+	}
+	return result;
+}
+
+
+/* In the following constant-bit-op macros, a "g" constraint is used when
+   we really need an integer ("i" constraint).  This is to avoid
+   warnings/errors from the compiler in the case where the associated
+   operand _isn't_ an integer, and shouldn't produce bogus assembly because
+   use of that form is protected by a guard statement that checks for
+   constants, and should otherwise be removed by the optimizer.  This
+   _usually_ works -- however, __builtin_constant_p returns true for a
+   variable with a known constant value too, and unfortunately gcc will
+   happily put the variable in a register and use the register for the "g"
+   constraint'd asm operand.  To avoid the latter problem, we add a
+   constant offset to the operand and subtract it back in the asm code;
+   forcing gcc to do arithmetic on the value is usually enough to get it
+   to use a real constant value.  This is horrible, and ultimately
+   unreliable too, but it seems to work for now (hopefully gcc will offer
+   us more control in the future, so we can do a better job).  */
+
+#define __const_bit_op(op, nr, addr)					\
+  ({ __asm__ (op " (%0 - 0x123), %1"					\
+	      :: "g" (((nr) & 0x7) + 0x123),				\
+		 "m" (*((char *)(addr) + ((nr) >> 3)))			\
+	      : "memory"); })
+#define __var_bit_op(op, nr, addr)					\
+  ({ int __nr = (nr);							\
+     __asm__ (op " %0, [%1]"						\
+	      :: "r" (__nr & 0x7),					\
+		 "r" ((char *)(addr) + (__nr >> 3))			\
+	      : "memory"); })
+#define __bit_op(op, nr, addr)						\
+  ((__builtin_constant_p (nr) && (unsigned)(nr) <= 0x7FFFF)		\
+   ? __const_bit_op (op, nr, addr)					\
+   : __var_bit_op (op, nr, addr))
+
+#define __set_bit(nr, addr)		__bit_op ("set1", nr, addr)
+#define __clear_bit(nr, addr)		__bit_op ("clr1", nr, addr)
+#define __change_bit(nr, addr)		__bit_op ("not1", nr, addr)
+
+/* The bit instructions used by `non-atomic' variants are actually atomic.  */
+#define set_bit __set_bit
+#define clear_bit __clear_bit
+#define change_bit __change_bit
+
+
+#define __const_tns_bit_op(op, nr, addr)				      \
+  ({ int __tns_res;							      \
+     __asm__ __volatile__ (						      \
+	     "tst1 (%1 - 0x123), %2; setf nz, %0; " op " (%1 - 0x123), %2"    \
+	     : "=&r" (__tns_res)					      \
+	     : "g" (((nr) & 0x7) + 0x123),				      \
+	       "m" (*((char *)(addr) + ((nr) >> 3)))			      \
+	     : "memory");						      \
+     __tns_res;								      \
+  })
+#define __var_tns_bit_op(op, nr, addr)					      \
+  ({ int __nr = (nr);							      \
+     int __tns_res;							      \
+     __asm__ __volatile__ (						      \
+	     "tst1 %1, [%2]; setf nz, %0; " op " %1, [%2]"		      \
+	      : "=&r" (__tns_res)					      \
+	      : "r" (__nr & 0x7),					      \
+		"r" ((char *)(addr) + (__nr >> 3))			      \
+	      : "memory");						      \
+     __tns_res;								      \
+  })
+#define __tns_bit_op(op, nr, addr)					\
+  ((__builtin_constant_p (nr) && (unsigned)(nr) <= 0x7FFFF)		\
+   ? __const_tns_bit_op (op, nr, addr)					\
+   : __var_tns_bit_op (op, nr, addr))
+#define __tns_atomic_bit_op(op, nr, addr)				\
+  ({ int __tns_atomic_res, __tns_atomic_flags;				\
+     local_irq_save (__tns_atomic_flags);				\
+     __tns_atomic_res = __tns_bit_op (op, nr, addr);			\
+     local_irq_restore (__tns_atomic_flags);				\
+     __tns_atomic_res;							\
+  })
+
+#define __test_and_set_bit(nr, addr)	__tns_bit_op ("set1", nr, addr)
+#define test_and_set_bit(nr, addr)	__tns_atomic_bit_op ("set1", nr, addr)
+
+#define __test_and_clear_bit(nr, addr)	__tns_bit_op ("clr1", nr, addr)
+#define test_and_clear_bit(nr, addr)	__tns_atomic_bit_op ("clr1", nr, addr)
+
+#define __test_and_change_bit(nr, addr)	__tns_bit_op ("not1", nr, addr)
+#define test_and_change_bit(nr, addr)	__tns_atomic_bit_op ("not1", nr, addr)
+
+
+#define __const_test_bit(nr, addr)					      \
+  ({ int __test_bit_res;						      \
+     __asm__ __volatile__ ("tst1 (%1 - 0x123), %2; setf nz, %0"		      \
+			   : "=r" (__test_bit_res)			      \
+			   : "g" (((nr) & 0x7) + 0x123),		      \
+			     "m" (*((const char *)(addr) + ((nr) >> 3))));    \
+     __test_bit_res;							      \
+  })
+extern __inline__ int __test_bit (int nr, const void *addr)
+{
+	int res;
+	__asm__ __volatile__ ("tst1 %1, [%2]; setf nz, %0"
+			      : "=r" (res)
+			      : "r" (nr & 0x7), "r" (addr + (nr >> 3)));
+	return res;
+}
+#define test_bit(nr,addr)						\
+  ((__builtin_constant_p (nr) && (unsigned)(nr) <= 0x7FFFF)		\
+   ? __const_test_bit ((nr), (addr))					\
+   : __test_bit ((nr), (addr)))
+
+
+/* clear_bit doesn't provide any barrier for the compiler.  */
+#define smp_mb__before_clear_bit()	barrier ()
+#define smp_mb__after_clear_bit()	barrier ()
+
+
+#define find_first_zero_bit(addr, size) \
+  find_next_zero_bit ((addr), (size), 0)
+
+extern __inline__ int find_next_zero_bit (void *addr, int size, int offset)
+{
+	unsigned long *p = ((unsigned long *) addr) + (offset >> 5);
+	unsigned long result = offset & ~31UL;
+	unsigned long tmp;
+
+	if (offset >= size)
+		return size;
+	size -= result;
+	offset &= 31UL;
+	if (offset) {
+		tmp = * (p++);
+		tmp |= ~0UL >> (32-offset);
+		if (size < 32)
+			goto found_first;
+		if (~tmp)
+			goto found_middle;
+		size -= 32;
+		result += 32;
+	}
+	while (size & ~31UL) {
+		if (~ (tmp = * (p++)))
+			goto found_middle;
+		result += 32;
+		size -= 32;
+	}
+	if (!size)
+		return result;
+	tmp = *p;
+
+ found_first:
+	tmp |= ~0UL >> size;
+ found_middle:
+	return result + ffz (tmp);
+}
+
+
+/* This is the same as generic_ffs, but we can't use that because it's
+   inline and the #include order mucks things up.  */
+static inline int generic_ffs_for_find_next_bit(int x)
+{
+	int r = 1;
+
+	if (!x)
+		return 0;
+	if (!(x & 0xffff)) {
+		x >>= 16;
+		r += 16;
+	}
+	if (!(x & 0xff)) {
+		x >>= 8;
+		r += 8;
+	}
+	if (!(x & 0xf)) {
+		x >>= 4;
+		r += 4;
+	}
+	if (!(x & 3)) {
+		x >>= 2;
+		r += 2;
+	}
+	if (!(x & 1)) {
+		x >>= 1;
+		r += 1;
+	}
+	return r;
+}
+
+/*
+ * Find next one bit in a bitmap reasonably efficiently.
+ */
+static __inline__ unsigned long find_next_bit(const unsigned long *addr,
+	unsigned long size, unsigned long offset)
+{
+	unsigned int *p = ((unsigned int *) addr) + (offset >> 5);
+	unsigned int result = offset & ~31UL;
+	unsigned int tmp;
+
+	if (offset >= size)
+		return size;
+	size -= result;
+	offset &= 31UL;
+	if (offset) {
+		tmp = *p++;
+		tmp &= ~0UL << offset;
+		if (size < 32)
+			goto found_first;
+		if (tmp)
+			goto found_middle;
+		size -= 32;
+		result += 32;
+	}
+	while (size >= 32) {
+		if ((tmp = *p++) != 0)
+			goto found_middle;
+		result += 32;
+		size -= 32;
+	}
+	if (!size)
+		return result;
+	tmp = *p;
+
+found_first:
+	tmp &= ~0UL >> (32 - size);
+	if (tmp == 0UL)        /* Are any bits set? */
+		return result + size; /* Nope. */
+found_middle:
+	return result + generic_ffs_for_find_next_bit(tmp);
+}
+
+/*
+ * find_first_bit - find the first set bit in a memory region
+ */
+#define find_first_bit(addr, size) \
+	find_next_bit((addr), (size), 0)
+
+
+#define ffs(x) generic_ffs (x)
+#define fls(x) generic_fls (x)
+#define __ffs(x) ffs(x)
+
+
+/*
+ * This is just `generic_ffs' from <linux/bitops.h>, except that it assumes
+ * that at least one bit is set, and returns the real index of the bit
+ * (rather than the bit index + 1, like ffs does).
+ */
+static inline int sched_ffs(int x)
+{
+	int r = 0;
+
+	if (!(x & 0xffff)) {
+		x >>= 16;
+		r += 16;
+	}
+	if (!(x & 0xff)) {
+		x >>= 8;
+		r += 8;
+	}
+	if (!(x & 0xf)) {
+		x >>= 4;
+		r += 4;
+	}
+	if (!(x & 3)) {
+		x >>= 2;
+		r += 2;
+	}
+	if (!(x & 1)) {
+		x >>= 1;
+		r += 1;
+	}
+	return r;
+}
+
+/*
+ * Every architecture must define this function. It's the fastest
+ * way of searching a 140-bit bitmap where the first 100 bits are
+ * unlikely to be set. It's guaranteed that at least one of the 140
+ * bits is set.
+ */
+static inline int sched_find_first_bit(unsigned long *b)
+{
+	unsigned offs = 0;
+	while (! *b) {
+		b++;
+		offs += 32;
+	}
+	return sched_ffs (*b) + offs;
+}
+
+/*
+ * hweightN: returns the hamming weight (i.e. the number
+ * of bits set) of a N-bit word
+ */
+#define hweight32(x) 			generic_hweight32 (x)
+#define hweight16(x) 			generic_hweight16 (x)
+#define hweight8(x) 			generic_hweight8 (x)
+
+#define ext2_set_bit			test_and_set_bit
+#define ext2_set_bit_atomic(l,n,a)      test_and_set_bit(n,a)
+#define ext2_clear_bit			test_and_clear_bit
+#define ext2_clear_bit_atomic(l,n,a)    test_and_clear_bit(n,a)
+#define ext2_test_bit			test_bit
+#define ext2_find_first_zero_bit	find_first_zero_bit
+#define ext2_find_next_zero_bit		find_next_zero_bit
+
+/* Bitmap functions for the minix filesystem.  */
+#define minix_test_and_set_bit		test_and_set_bit
+#define minix_set_bit			set_bit
+#define minix_test_and_clear_bit	test_and_clear_bit
+#define minix_test_bit 			test_bit
+#define minix_find_first_zero_bit 	find_first_zero_bit
+
+#endif /* __KERNEL__ */
+
+#endif /* __V850_BITOPS_H__ */
diff --git a/include/asm-v850/bug.h b/include/asm-v850/bug.h
new file mode 100644
index 0000000..c778916
--- /dev/null
+++ b/include/asm-v850/bug.h
@@ -0,0 +1,22 @@
+/*
+ * include/asm-v850/bug.h -- Bug reporting
+ *
+ *  Copyright (C) 2003  NEC Electronics Corporation
+ *  Copyright (C) 2003  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef __V850_BUG_H__
+#define __V850_BUG_H__
+
+extern void __bug (void) __attribute__ ((noreturn));
+#define BUG()		__bug()
+#define HAVE_ARCH_BUG
+#include <asm-generic/bug.h>
+
+#endif /* __V850_BUG_H__ */
diff --git a/include/asm-v850/bugs.h b/include/asm-v850/bugs.h
new file mode 100644
index 0000000..71110a6
--- /dev/null
+++ b/include/asm-v850/bugs.h
@@ -0,0 +1,16 @@
+/*
+ *  include/asm-v850e/bugs.h
+ *
+ *  Copyright (C) 1994  Linus Torvalds
+ */
+
+/*
+ * This is included by init/main.c to check for architecture-dependent bugs.
+ *
+ * Needs:
+ *	void check_bugs(void);
+ */
+
+static void check_bugs(void)
+{
+}
diff --git a/include/asm-v850/byteorder.h b/include/asm-v850/byteorder.h
new file mode 100644
index 0000000..a6f0753
--- /dev/null
+++ b/include/asm-v850/byteorder.h
@@ -0,0 +1,48 @@
+/*
+ * include/asm-v850/byteorder.h -- Endian id and conversion ops
+ *
+ *  Copyright (C) 2001  NEC Corporation
+ *  Copyright (C) 2001  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef __V850_BYTEORDER_H__
+#define __V850_BYTEORDER_H__
+
+#include <asm/types.h>
+#include <linux/compiler.h>
+
+#ifdef __GNUC__
+
+static __inline__ __attribute_const__ __u32 ___arch__swab32 (__u32 word)
+{
+	__u32 res;
+	__asm__ ("bsw %1, %0" : "=r" (res) : "r" (word));
+	return res;
+}
+
+static __inline__ __attribute_const__ __u16 ___arch__swab16 (__u16 half_word)
+{
+	__u16 res;
+	__asm__ ("bsh %1, %0" : "=r" (res) : "r" (half_word));
+	return res;
+}
+
+#define __arch__swab32(x) ___arch__swab32(x)
+#define __arch__swab16(x) ___arch__swab16(x)
+
+#if !defined(__STRICT_ANSI__) || defined(__KERNEL__)
+#  define __BYTEORDER_HAS_U64__
+#  define __SWAB_64_THRU_32__
+#endif
+
+#endif /* __GNUC__ */
+
+#include <linux/byteorder/little_endian.h>
+
+#endif /* __V850_BYTEORDER_H__ */
diff --git a/include/asm-v850/cache.h b/include/asm-v850/cache.h
new file mode 100644
index 0000000..027f8c9
--- /dev/null
+++ b/include/asm-v850/cache.h
@@ -0,0 +1,25 @@
+/*
+ * include/asm-v850/cache.h -- Cache operations
+ *
+ *  Copyright (C) 2001  NEC Corporation
+ *  Copyright (C) 2001  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef __V850_CACHE_H__
+#define __V850_CACHE_H__
+
+/* All cache operations are machine-dependent.  */
+#include <asm/machdep.h>
+
+#ifndef L1_CACHE_BYTES
+/* This processor has no cache, so just choose an arbitrary value.  */
+#define L1_CACHE_BYTES		16
+#endif
+
+#endif /* __V850_CACHE_H__ */
diff --git a/include/asm-v850/cacheflush.h b/include/asm-v850/cacheflush.h
new file mode 100644
index 0000000..e1a87f8
--- /dev/null
+++ b/include/asm-v850/cacheflush.h
@@ -0,0 +1,69 @@
+/*
+ * include/asm-v850/cacheflush.h
+ *
+ *  Copyright (C) 2001,02,03  NEC Electronics Corporation
+ *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef __V850_CACHEFLUSH_H__
+#define __V850_CACHEFLUSH_H__
+
+/* Somebody depends on this; sigh...  */
+#include <linux/mm.h>
+
+#include <asm/machdep.h>
+
+
+/* The following are all used by the kernel in ways that only affect
+   systems with MMUs, so we don't need them.  */
+#define flush_cache_all()			((void)0)
+#define flush_cache_mm(mm)			((void)0)
+#define flush_cache_range(vma, start, end)	((void)0)
+#define flush_cache_page(vma, vmaddr, pfn)	((void)0)
+#define flush_dcache_page(page)			((void)0)
+#define flush_dcache_mmap_lock(mapping)		((void)0)
+#define flush_dcache_mmap_unlock(mapping)	((void)0)
+#define flush_cache_vmap(start, end)		((void)0)
+#define flush_cache_vunmap(start, end)		((void)0)
+
+#ifdef CONFIG_NO_CACHE
+
+/* Some systems have no cache at all, in which case we don't need these
+   either.  */
+#define flush_icache()				((void)0)
+#define flush_icache_range(start, end)		((void)0)
+#define flush_icache_page(vma,pg)		((void)0)
+#define flush_icache_user_range(vma,pg,adr,len)	((void)0)
+#define flush_cache_sigtramp(vaddr)		((void)0)
+
+#else /* !CONFIG_NO_CACHE */
+
+struct page;
+struct mm_struct;
+struct vm_area_struct;
+
+/* Otherwise, somebody had better define them.  */
+extern void flush_icache (void);
+extern void flush_icache_range (unsigned long start, unsigned long end);
+extern void flush_icache_page (struct vm_area_struct *vma, struct page *page);
+extern void flush_icache_user_range (struct vm_area_struct *vma,
+				     struct page *page,
+				     unsigned long adr, int len);
+extern void flush_cache_sigtramp (unsigned long addr);
+
+#endif /* CONFIG_NO_CACHE */
+
+#define copy_to_user_page(vma, page, vaddr, dst, src, len) \
+do { memcpy(dst, src, len); \
+     flush_icache_user_range(vma, page, vaddr, len); \
+} while (0)
+#define copy_from_user_page(vma, page, vaddr, dst, src, len) \
+	memcpy(dst, src, len)
+
+#endif /* __V850_CACHEFLUSH_H__ */
diff --git a/include/asm-v850/checksum.h b/include/asm-v850/checksum.h
new file mode 100644
index 0000000..d3aedb7
--- /dev/null
+++ b/include/asm-v850/checksum.h
@@ -0,0 +1,115 @@
+/*
+ * include/asm-v850/checksum.h -- Checksum ops
+ *
+ *  Copyright (C) 2001  NEC Corporation
+ *  Copyright (C) 2001  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef __V850_CHECKSUM_H__
+#define __V850_CHECKSUM_H__
+
+/*
+ * computes the checksum of a memory block at buff, length len,
+ * and adds in "sum" (32-bit)
+ *
+ * returns a 32-bit number suitable for feeding into itself
+ * or csum_tcpudp_magic
+ *
+ * this function must be called with even lengths, except
+ * for the last fragment, which may be odd
+ *
+ * it's best to have buff aligned on a 32-bit boundary
+ */
+extern unsigned int csum_partial (const unsigned char * buff, int len,
+				  unsigned int sum);
+
+/*
+ * the same as csum_partial, but copies from src while it
+ * checksums
+ *
+ * here even more important to align src and dst on a 32-bit (or even
+ * better 64-bit) boundary
+ */
+extern unsigned csum_partial_copy (const char *src, char *dst, int len,
+				   unsigned sum);
+
+
+/*
+ * the same as csum_partial_copy, but copies from user space.
+ *
+ * here even more important to align src and dst on a 32-bit (or even
+ * better 64-bit) boundary
+ */
+extern unsigned csum_partial_copy_from_user (const char *src, char *dst,
+					     int len, unsigned sum,
+					     int *csum_err);
+
+#define csum_partial_copy_nocheck(src, dst, len, sum)	\
+	csum_partial_copy ((src), (dst), (len), (sum))
+
+unsigned short ip_fast_csum (unsigned char *iph, unsigned int ihl);
+
+/*
+ *	Fold a partial checksum
+ */
+static inline unsigned int csum_fold (unsigned long sum)
+{
+	unsigned int result;
+	/*
+			        %0		%1
+	      hsw %1, %0	H     L		L     H
+	      add %1, %0	H     L		H+L+C H+L
+	*/
+	asm ("hsw %1, %0; add %1, %0" : "=&r" (result) : "r" (sum));
+	return (~result) >> 16;
+}
+
+
+/*
+ * computes the checksum of the TCP/UDP pseudo-header
+ * returns a 16-bit checksum, already complemented
+ */
+static inline unsigned int
+csum_tcpudp_nofold (unsigned long saddr, unsigned long daddr,
+		    unsigned short len,
+		    unsigned short proto, unsigned int sum)
+{
+	int __carry;
+	__asm__ ("add %2, %0;"
+		 "setf c, %1;"
+		 "add %1, %0;"
+		 "add %3, %0;"
+		 "setf c, %1;"
+		 "add %1, %0;"
+		 "add %4, %0;"
+		 "setf c, %1;"
+		 "add %1, %0"
+		 : "=&r" (sum), "=&r" (__carry)
+		 : "r" (daddr), "r" (saddr),
+		 "r" (ntohs (len) + (proto << 8)),
+		 "0" (sum));
+	return sum;
+}
+
+static inline unsigned short int
+csum_tcpudp_magic (unsigned long saddr, unsigned long daddr,
+		   unsigned short len,
+		   unsigned short proto, unsigned int sum)
+{
+	return csum_fold (csum_tcpudp_nofold (saddr, daddr, len, proto, sum));
+}
+
+/*
+ * this routine is used for miscellaneous IP-like checksums, mainly
+ * in icmp.c
+ */
+extern unsigned short ip_compute_csum (const unsigned char * buff, int len);
+
+
+#endif /* __V850_CHECKSUM_H__ */
diff --git a/include/asm-v850/clinkage.h b/include/asm-v850/clinkage.h
new file mode 100644
index 0000000..2b622ad
--- /dev/null
+++ b/include/asm-v850/clinkage.h
@@ -0,0 +1,26 @@
+/*
+ * include/asm-v850/clinkage.h -- Macros to reflect C symbol-naming conventions
+ *
+ *  Copyright (C) 2001,02  NEC Corporatione
+ *  Copyright (C) 2001,02  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef __CLINKAGE_H__
+#define __V850_CLINKAGE_H__
+
+#include <asm/macrology.h>
+#include <asm/asm.h>
+
+#define C_SYMBOL_NAME(name) 	macrology_paste(_, name)
+#define C_SYMBOL_STRING(name)	macrology_stringify(C_SYMBOL_NAME(name))
+#define C_ENTRY(name)		G_ENTRY(C_SYMBOL_NAME(name))
+#define C_DATA(name)		G_DATA(C_SYMBOL_NAME(name))
+#define C_END(name)		END(C_SYMBOL_NAME(name))
+
+#endif /* __V850_CLINKAGE_H__ */
diff --git a/include/asm-v850/cputime.h b/include/asm-v850/cputime.h
new file mode 100644
index 0000000..7c799c3
--- /dev/null
+++ b/include/asm-v850/cputime.h
@@ -0,0 +1,6 @@
+#ifndef __V850_CPUTIME_H
+#define __V850_CPUTIME_H
+
+#include <asm-generic/cputime.h>
+
+#endif /* __V850_CPUTIME_H */
diff --git a/include/asm-v850/current.h b/include/asm-v850/current.h
new file mode 100644
index 0000000..30aae56
--- /dev/null
+++ b/include/asm-v850/current.h
@@ -0,0 +1,47 @@
+/*
+ * include/asm-v850/current.h -- Current task
+ *
+ *  Copyright (C) 2001,02  NEC Corporation
+ *  Copyright (C) 2001,02  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef __V850_CURRENT_H__
+#define __V850_CURRENT_H__
+
+#ifndef __ASSEMBLY__ /* <linux/thread_info.h> is not asm-safe.  */
+#include <linux/thread_info.h>
+#endif
+
+#include <asm/macrology.h>
+
+
+/* Register used to hold the current task pointer while in the kernel.
+   Any `call clobbered' register without a special meaning should be OK,
+   but check asm/v850/kernel/entry.S to be sure.  */
+#define CURRENT_TASK_REGNUM	16
+#define CURRENT_TASK 		macrology_paste (r, CURRENT_TASK_REGNUM)
+
+
+#ifdef __ASSEMBLY__
+
+/* Put a pointer to the current task structure into REG.  */
+#define GET_CURRENT_TASK(reg)						\
+	GET_CURRENT_THREAD(reg);					\
+	ld.w	TI_TASK[reg], reg
+
+#else /* !__ASSEMBLY__ */
+
+/* A pointer to the current task.  */
+register struct task_struct *current					\
+   __asm__ (macrology_stringify (CURRENT_TASK));
+
+#endif /* __ASSEMBLY__ */
+
+
+#endif /* _V850_CURRENT_H */
diff --git a/include/asm-v850/delay.h b/include/asm-v850/delay.h
new file mode 100644
index 0000000..1ce65d48
--- /dev/null
+++ b/include/asm-v850/delay.h
@@ -0,0 +1,47 @@
+/*
+ * include/asm-v850/delay.h -- Delay routines, using a pre-computed
+ * 	"loops_per_second" value
+ *
+ *  Copyright (C) 2001,03  NEC Corporation
+ *  Copyright (C) 2001,03  Miles Bader <miles@gnu.org>
+ *  Copyright (C) 1994 Hamish Macdonald
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ */
+
+#ifndef __V850_DELAY_H__
+#define __V850_DELAY_H__
+
+#include <asm/param.h>
+
+extern __inline__ void __delay(unsigned long loops)
+{
+	if (loops)
+		__asm__ __volatile__ ("1: add -1, %0; bnz 1b"
+				      : "=r" (loops) : "0" (loops));
+}
+
+/*
+ * Use only for very small delays ( < 1 msec).  Should probably use a
+ * lookup table, really, as the multiplications take much too long with
+ * short delays.  This is a "reasonable" implementation, though (and the
+ * first constant multiplications gets optimized away if the delay is
+ * a constant)  
+ */
+
+extern unsigned long loops_per_jiffy;
+
+extern __inline__ void udelay(unsigned long usecs)
+{
+	register unsigned long full_loops, part_loops;
+
+	full_loops = ((usecs * HZ) / 1000000) * loops_per_jiffy;
+	usecs %= (1000000 / HZ);
+	part_loops = (usecs * HZ * loops_per_jiffy) / 1000000;
+
+	__delay(full_loops + part_loops);
+}
+
+#endif /* __V850_DELAY_H__ */
diff --git a/include/asm-v850/div64.h b/include/asm-v850/div64.h
new file mode 100644
index 0000000..6cd978c
--- /dev/null
+++ b/include/asm-v850/div64.h
@@ -0,0 +1 @@
+#include <asm-generic/div64.h>
diff --git a/include/asm-v850/dma-mapping.h b/include/asm-v850/dma-mapping.h
new file mode 100644
index 0000000..c63fb50
--- /dev/null
+++ b/include/asm-v850/dma-mapping.h
@@ -0,0 +1,12 @@
+#ifndef __V850_DMA_MAPPING_H__
+#define __V850_DMA_MAPPING_H__
+
+#include <linux/config.h>
+
+#ifdef CONFIG_PCI
+#include <asm-generic/dma-mapping.h>
+#else
+#include <asm-generic/dma-mapping-broken.h>
+#endif
+
+#endif /* __V850_DMA_MAPPING_H__ */
diff --git a/include/asm-v850/dma.h b/include/asm-v850/dma.h
new file mode 100644
index 0000000..2369849
--- /dev/null
+++ b/include/asm-v850/dma.h
@@ -0,0 +1,18 @@
+#ifndef __V850_DMA_H__
+#define __V850_DMA_H__
+
+/* What should this be?  */
+#define MAX_DMA_ADDRESS	0xFFFFFFFF
+
+/* reserve a DMA channel */
+extern int request_dma (unsigned int dmanr, const char * device_id);
+/* release it again */
+extern void free_dma (unsigned int dmanr);
+
+#ifdef CONFIG_PCI
+extern int isa_dma_bridge_buggy;
+#else
+#define isa_dma_bridge_buggy    (0)
+#endif
+
+#endif /* __V850_DMA_H__ */
diff --git a/include/asm-v850/elf.h b/include/asm-v850/elf.h
new file mode 100644
index 0000000..7db8edf
--- /dev/null
+++ b/include/asm-v850/elf.h
@@ -0,0 +1,101 @@
+#ifndef __V850_ELF_H__
+#define __V850_ELF_H__
+
+/*
+ * ELF register definitions..
+ */
+
+#include <asm/ptrace.h>
+#include <asm/user.h>
+#include <asm/byteorder.h>
+
+typedef unsigned long elf_greg_t;
+
+#define ELF_NGREG (sizeof (struct pt_regs) / sizeof(elf_greg_t))
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+
+typedef struct user_fpu_struct elf_fpregset_t;
+
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+#define elf_check_arch(x)  \
+  ((x)->e_machine == EM_V850 || (x)->e_machine == EM_CYGNUS_V850)
+
+
+/* v850 relocation types.  */
+#define R_V850_NONE		0
+#define R_V850_9_PCREL		1
+#define R_V850_22_PCREL		2
+#define R_V850_HI16_S		3
+#define R_V850_HI16		4
+#define R_V850_LO16		5
+#define R_V850_32		6
+#define R_V850_16		7
+#define R_V850_8		8
+#define R_V850_SDA_16_16_OFFSET	9	/* For ld.b, st.b, set1, clr1,
+					   not1, tst1, movea, movhi */
+#define R_V850_SDA_15_16_OFFSET	10	/* For ld.w, ld.h, ld.hu, st.w, st.h */
+#define R_V850_ZDA_16_16_OFFSET	11	/* For ld.b, st.b, set1, clr1,
+					   not1, tst1, movea, movhi */
+#define R_V850_ZDA_15_16_OFFSET	12	/* For ld.w, ld.h, ld.hu, st.w, st.h */
+#define R_V850_TDA_6_8_OFFSET	13	/* For sst.w, sld.w */
+#define R_V850_TDA_7_8_OFFSET	14	/* For sst.h, sld.h */
+#define R_V850_TDA_7_7_OFFSET	15	/* For sst.b, sld.b */
+#define R_V850_TDA_16_16_OFFSET	16	/* For set1, clr1, not1, tst1,
+					   movea, movhi */
+#define R_V850_NUM		17
+
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#define ELF_CLASS	ELFCLASS32
+#ifdef __LITTLE_ENDIAN__
+#define ELF_DATA	ELFDATA2LSB
+#else
+#define ELF_DATA	ELFDATA2MSB
+#endif
+#define ELF_ARCH	EM_V850
+
+#define USE_ELF_CORE_DUMP
+#define ELF_EXEC_PAGESIZE	4096
+
+
+#define ELF_CORE_COPY_REGS(_dest,_regs)				\
+	memcpy((char *) &_dest, (char *) _regs,			\
+	       sizeof(struct pt_regs));
+
+/* This yields a mask that user programs can use to figure out what
+   instruction set this CPU supports.  This could be done in user space,
+   but it's not easy, and we've already done it here.  */
+
+#define ELF_HWCAP	(0)
+
+/* This yields a string that ld.so will use to load implementation
+   specific libraries for optimization.  This is more specific in
+   intent than poking at uname or /proc/cpuinfo.
+
+   For the moment, we have only optimizations for the Intel generations,
+   but that could change... */
+
+#define ELF_PLATFORM  (NULL)
+
+#define ELF_PLAT_INIT(_r, load_addr)					      \
+  do {									      \
+	 _r->gpr[0] =  _r->gpr[1] =  _r->gpr[2] =  _r->gpr[3] =		      \
+	 _r->gpr[4] =  _r->gpr[5] =  _r->gpr[6] =  _r->gpr[7] =		      \
+	 _r->gpr[8] =  _r->gpr[9] = _r->gpr[10] = _r->gpr[11] =		      \
+	_r->gpr[12] = _r->gpr[13] = _r->gpr[14] = _r->gpr[15] =		      \
+	_r->gpr[16] = _r->gpr[17] = _r->gpr[18] = _r->gpr[19] =		      \
+	_r->gpr[20] = _r->gpr[21] = _r->gpr[22] = _r->gpr[23] =		      \
+	_r->gpr[24] = _r->gpr[25] = _r->gpr[26] = _r->gpr[27] =		      \
+	_r->gpr[28] = _r->gpr[29] = _r->gpr[30] = _r->gpr[31] =		      \
+	0;								      \
+  } while (0)
+
+#ifdef __KERNEL__
+#define SET_PERSONALITY(ex, ibcs2) set_personality(PER_LINUX_32BIT)
+#endif
+
+#endif /* __V850_ELF_H__ */
diff --git a/include/asm-v850/entry.h b/include/asm-v850/entry.h
new file mode 100644
index 0000000..d9df8ac
--- /dev/null
+++ b/include/asm-v850/entry.h
@@ -0,0 +1,113 @@
+/*
+ * include/asm-v850/entry.h -- Definitions used by low-level trap handlers
+ *
+ *  Copyright (C) 2001,02,03  NEC Electronics Corporation
+ *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef __V850_ENTRY_H__
+#define __V850_ENTRY_H__
+
+
+#include <asm/ptrace.h>
+#include <asm/machdep.h>
+
+
+/* These are special variables using by the kernel trap/interrupt code
+   to save registers in, at a time when there are no spare registers we
+   can use to do so, and we can't depend on the value of the stack
+   pointer.  This means that they must be within a signed 16-bit
+   displacement of 0x00000000.  */
+
+#define KERNEL_VAR_SPACE_ADDR	R0_RAM_ADDR
+
+#ifdef __ASSEMBLY__
+#define KERNEL_VAR(addr)	addr[r0]
+#else
+#define KERNEL_VAR(addr)	(*(volatile unsigned long *)(addr))
+#endif
+
+/* Kernel stack pointer, 4 bytes.  */
+#define KSP_ADDR		(KERNEL_VAR_SPACE_ADDR +  0)
+#define KSP			KERNEL_VAR (KSP_ADDR)
+/* 1 if in kernel-mode, 0 if in user mode, 1 byte.  */
+#define KM_ADDR 		(KERNEL_VAR_SPACE_ADDR +  4)
+#define KM			KERNEL_VAR (KM_ADDR)
+/* Temporary storage for interrupt handlers, 4 bytes.  */
+#define INT_SCRATCH_ADDR	(KERNEL_VAR_SPACE_ADDR +  8)
+#define INT_SCRATCH		KERNEL_VAR (INT_SCRATCH_ADDR)
+/* Where the stack-pointer is saved when jumping to various sorts of
+   interrupt handlers.  ENTRY_SP is used by everything except NMIs,
+   which have their own location.  Higher-priority NMIs can clobber the
+   value written by a lower priority NMI, since they can't be disabled,
+   but that's OK, because only NMI0 (the lowest-priority one) is allowed
+   to return.  */
+#define ENTRY_SP_ADDR		(KERNEL_VAR_SPACE_ADDR + 12)
+#define ENTRY_SP		KERNEL_VAR (ENTRY_SP_ADDR)
+#define NMI_ENTRY_SP_ADDR	(KERNEL_VAR_SPACE_ADDR + 16)
+#define NMI_ENTRY_SP		KERNEL_VAR (NMI_ENTRY_SP_ADDR)
+
+#ifdef CONFIG_RESET_GUARD
+/* Used to detect unexpected resets (since the v850 has no MMU, any call
+   through a null pointer will jump to the reset vector).  We detect
+   such resets by checking for a magic value, RESET_GUARD_ACTIVE, in
+   this location.  Properly resetting the machine stores zero there, so
+   it shouldn't trigger the guard; the power-on value is uncertain, but
+   it's unlikely to be RESET_GUARD_ACTIVE.  */
+#define RESET_GUARD_ADDR	(KERNEL_VAR_SPACE_ADDR + 28)
+#define RESET_GUARD		KERNEL_VAR (RESET_GUARD_ADDR)
+#define RESET_GUARD_ACTIVE	0xFAB4BEEF
+#endif /* CONFIG_RESET_GUARD */
+
+#ifdef CONFIG_V850E_HIGHRES_TIMER
+#define HIGHRES_TIMER_SLOW_TICKS_ADDR (KERNEL_VAR_SPACE_ADDR + 32)
+#define HIGHRES_TIMER_SLOW_TICKS     KERNEL_VAR (HIGHRES_TIMER_SLOW_TICKS_ADDR)
+#endif /* CONFIG_V850E_HIGHRES_TIMER */
+
+#ifndef __ASSEMBLY__
+
+#ifdef CONFIG_RESET_GUARD
+/* Turn off reset guard, so that resetting the machine works normally.
+   This should be called in the various machine_halt, etc., functions.  */
+static inline void disable_reset_guard (void)
+{
+	RESET_GUARD = 0;
+}
+#endif /* CONFIG_RESET_GUARD */
+
+#endif /* !__ASSEMBLY__ */
+
+
+/* A `state save frame' is a struct pt_regs preceded by some extra space
+   suitable for a function call stack frame.  */
+
+/* Amount of room on the stack reserved for arguments and to satisfy the
+   C calling conventions, in addition to the space used by the struct
+   pt_regs that actually holds saved values.  */
+#define STATE_SAVE_ARG_SPACE	(6*4) /* Up to six arguments.  */
+
+
+#ifdef __ASSEMBLY__
+
+/* The size of a state save frame.  */
+#define STATE_SAVE_SIZE		(PT_SIZE + STATE_SAVE_ARG_SPACE)
+
+#else /* !__ASSEMBLY__ */
+
+/* The size of a state save frame.  */
+#define STATE_SAVE_SIZE	       (sizeof (struct pt_regs) + STATE_SAVE_ARG_SPACE)
+
+#endif /* __ASSEMBLY__ */
+
+
+/* Offset of the struct pt_regs in a state save frame.  */
+#define STATE_SAVE_PT_OFFSET	STATE_SAVE_ARG_SPACE
+
+
+#endif /* __V850_ENTRY_H__ */
diff --git a/include/asm-v850/errno.h b/include/asm-v850/errno.h
new file mode 100644
index 0000000..31c91df
--- /dev/null
+++ b/include/asm-v850/errno.h
@@ -0,0 +1,6 @@
+#ifndef __V850_ERRNO_H__
+#define __V850_ERRNO_H__
+
+#include <asm-generic/errno.h>
+
+#endif /* __V850_ERRNO_H__ */
diff --git a/include/asm-v850/fcntl.h b/include/asm-v850/fcntl.h
new file mode 100644
index 0000000..31d4b59
--- /dev/null
+++ b/include/asm-v850/fcntl.h
@@ -0,0 +1,87 @@
+#ifndef __V850_FCNTL_H__
+#define __V850_FCNTL_H__
+
+/* open/fcntl - O_SYNC is only implemented on blocks devices and on files
+   located on an ext2 file system */
+#define O_ACCMODE	  0003
+#define O_RDONLY	    00
+#define O_WRONLY	    01
+#define O_RDWR		    02
+#define O_CREAT		  0100	/* not fcntl */
+#define O_EXCL		  0200	/* not fcntl */
+#define O_NOCTTY	  0400	/* not fcntl */
+#define O_TRUNC		 01000	/* not fcntl */
+#define O_APPEND	 02000
+#define O_NONBLOCK	 04000
+#define O_NDELAY	O_NONBLOCK
+#define O_SYNC		010000
+#define FASYNC		020000	/* fcntl, for BSD compatibility */
+#define O_DIRECTORY	040000	/* must be a directory */
+#define O_NOFOLLOW     0100000	/* don't follow links */
+#define O_DIRECT       0200000	/* direct disk access hint - currently ignored */
+#define O_LARGEFILE    0400000
+#define O_NOATIME	01000000
+
+#define F_DUPFD		0	/* dup */
+#define F_GETFD		1	/* get close_on_exec */
+#define F_SETFD		2	/* set/clear close_on_exec */
+#define F_GETFL		3	/* get file->f_flags */
+#define F_SETFL		4	/* set file->f_flags */
+#define F_GETLK		5
+#define F_SETLK		6
+#define F_SETLKW	7
+
+#define F_SETOWN	8	/*  for sockets. */
+#define F_GETOWN	9	/*  for sockets. */
+#define F_SETSIG	10	/*  for sockets. */
+#define F_GETSIG	11	/*  for sockets. */
+
+#define F_GETLK64	12	/*  using 'struct flock64' */
+#define F_SETLK64	13
+#define F_SETLKW64	14
+
+/* for F_[GET|SET]FL */
+#define FD_CLOEXEC	1	/* actually anything with low bit set goes */
+
+/* for posix fcntl() and lockf() */
+#define F_RDLCK		0
+#define F_WRLCK		1
+#define F_UNLCK		2
+
+/* for old implementation of bsd flock () */
+#define F_EXLCK		4	/* or 3 */
+#define F_SHLCK		8	/* or 4 */
+
+/* for leases */
+#define F_INPROGRESS	16
+
+/* operations for bsd flock(), also used by the kernel implementation */
+#define LOCK_SH		1	/* shared lock */
+#define LOCK_EX		2	/* exclusive lock */
+#define LOCK_NB		4	/* or'd with one of the above to prevent
+				   blocking */
+#define LOCK_UN		8	/* remove lock */
+
+#define LOCK_MAND	32	/* This is a mandatory flock */
+#define LOCK_READ	64	/* ... Which allows concurrent read operations */
+#define LOCK_WRITE	128	/* ... Which allows concurrent write operations */
+#define LOCK_RW		192	/* ... Which allows concurrent read & write ops */
+
+struct flock {
+	short l_type;
+	short l_whence;
+	off_t l_start;
+	off_t l_len;
+	pid_t l_pid;
+};
+
+struct flock64 {
+	short  l_type;
+	short  l_whence;
+	loff_t l_start;
+	loff_t l_len;
+	pid_t  l_pid;
+};
+
+#define F_LINUX_SPECIFIC_BASE	1024
+#endif /* __V850_FCNTL_H__ */
diff --git a/include/asm-v850/flat.h b/include/asm-v850/flat.h
new file mode 100644
index 0000000..3888f59
--- /dev/null
+++ b/include/asm-v850/flat.h
@@ -0,0 +1,131 @@
+/*
+ * include/asm-v850/flat.h -- uClinux flat-format executables
+ *
+ *  Copyright (C) 2002,03  NEC Electronics Corporation
+ *  Copyright (C) 2002,03  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef __V850_FLAT_H__
+#define __V850_FLAT_H__
+
+/* The amount by which a relocation can exceed the program image limits
+   without being regarded as an error.  On the v850, the relocations of
+   some base-pointers can be offset by 0x8000 (to allow better usage of the
+   space offered by 16-bit signed offsets -- in most cases the offsets used
+   with such a base-pointer will be negative).  */
+
+#define	flat_reloc_valid(reloc, size)	((reloc) <= (size + 0x8000))
+
+#define	flat_stack_align(sp)		/* nothing needed */
+#define	flat_argvp_envp_on_stack()	0
+#define	flat_old_ram_flag(flags)	(flags)
+
+/* We store the type of relocation in the top 4 bits of the `relval.' */
+
+/* Convert a relocation entry into an address.  */
+static inline unsigned long
+flat_get_relocate_addr (unsigned long relval)
+{
+	return relval & 0x0fffffff; /* Mask out top 4-bits */
+}
+
+#define flat_v850_get_reloc_type(relval) ((relval) >> 28)
+
+#define FLAT_V850_R_32		0 /* Normal 32-bit reloc */
+#define FLAT_V850_R_HI16S_LO15	1 /* High 16-bits + signed 15-bit low field */
+#define FLAT_V850_R_HI16S_LO16	2 /* High 16-bits + signed 16-bit low field */
+
+/* Extract the address to be relocated from the symbol reference at RP;
+   RELVAL is the raw relocation-table entry from which RP is derived.
+   For the v850, RP should always be half-word aligned.  */
+static inline unsigned long flat_get_addr_from_rp (unsigned long *rp,
+						   unsigned long relval,
+						   unsigned long flags)
+{
+	short *srp = (short *)rp;
+
+	switch (flat_v850_get_reloc_type (relval))
+	{
+	case FLAT_V850_R_32:
+		/* Simple 32-bit address.  */
+		return srp[0] | (srp[1] << 16);
+
+	case FLAT_V850_R_HI16S_LO16:
+		/* The high and low halves of the address are in the 16
+		   bits at RP, and the 2nd word of the 32-bit instruction
+		   following that, respectively.  The low half is _signed_
+		   so we have to sign-extend it and add it to the upper
+		   half instead of simply or-ing them together.
+
+		   Unlike most relocated address, this one is stored in
+		   native (little-endian) byte-order to avoid problems with
+		   trashing the low-order bit, so we have to convert to
+		   network-byte-order before returning, as that's what the
+		   caller expects.  */
+		return htonl ((srp[0] << 16) + srp[2]);
+
+	case FLAT_V850_R_HI16S_LO15:
+		/* The high and low halves of the address are in the 16
+		   bits at RP, and the upper 15 bits of the 2nd word of the
+		   32-bit instruction following that, respectively.  The
+		   low half is _signed_ so we have to sign-extend it and
+		   add it to the upper half instead of simply or-ing them
+		   together.  The lowest bit is always zero.
+
+		   Unlike most relocated address, this one is stored in
+		   native (little-endian) byte-order to avoid problems with
+		   trashing the low-order bit, so we have to convert to
+		   network-byte-order before returning, as that's what the
+		   caller expects.  */
+		return htonl ((srp[0] << 16) + (srp[2] & ~0x1));
+
+	default:
+		return ~0;	/* bogus value */
+	}
+}
+
+/* Insert the address ADDR into the symbol reference at RP;
+   RELVAL is the raw relocation-table entry from which RP is derived.
+   For the v850, RP should always be half-word aligned.  */
+static inline void flat_put_addr_at_rp (unsigned long *rp, unsigned long addr,
+					unsigned long relval)
+{
+	short *srp = (short *)rp;
+
+	switch (flat_v850_get_reloc_type (relval)) {
+	case FLAT_V850_R_32:
+		/* Simple 32-bit address.  */
+		srp[0] = addr & 0xFFFF;
+		srp[1] = (addr >> 16);
+		break;
+
+	case FLAT_V850_R_HI16S_LO16:
+		/* The high and low halves of the address are in the 16
+		   bits at RP, and the 2nd word of the 32-bit instruction
+		   following that, respectively.  The low half is _signed_
+		   so we must carry its sign bit to the upper half before
+		   writing the upper half.  */
+		srp[0] = (addr >> 16) + ((addr >> 15) & 0x1);
+		srp[2] = addr & 0xFFFF;
+		break;
+
+	case FLAT_V850_R_HI16S_LO15:
+		/* The high and low halves of the address are in the 16
+		   bits at RP, and the upper 15 bits of the 2nd word of the
+		   32-bit instruction following that, respectively.  The
+		   low half is _signed_ so we must carry its sign bit to
+		   the upper half before writing the upper half.  The
+		   lowest bit we preserve from the existing instruction.  */
+		srp[0] = (addr >> 16) + ((addr >> 15) & 0x1);
+		srp[2] = (addr & 0xFFFE) | (srp[2] & 0x1);
+		break;
+	}
+}
+
+#endif /* __V850_FLAT_H__ */
diff --git a/include/asm-v850/fpga85e2c.h b/include/asm-v850/fpga85e2c.h
new file mode 100644
index 0000000..d32f045
--- /dev/null
+++ b/include/asm-v850/fpga85e2c.h
@@ -0,0 +1,88 @@
+/*
+ * include/asm-v850/fpga85e2c.h -- Machine-dependent defs for
+ *	FPGA implementation of V850E2/NA85E2C
+ *
+ *  Copyright (C) 2002,03  NEC Electronics Corporation
+ *  Copyright (C) 2002,03  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef __V850_FPGA85E2C_H__
+#define __V850_FPGA85E2C_H__
+
+#include <asm/v850e2.h>
+#include <asm/clinkage.h>
+
+
+#define CPU_MODEL	"v850e2/fpga85e2c"
+#define CPU_MODEL_LONG	"NEC V850E2/NA85E2C"
+#define PLATFORM	"fpga85e2c"
+#define PLATFORM_LONG	"NA85E2C FPGA implementation"
+
+
+/* `external ram'.  */
+#define ERAM_ADDR		0
+#define ERAM_SIZE		0x00100000 /* 1MB */
+
+
+/* FPGA specific control registers.  */
+
+/* Writing a non-zero value to FLGREG(0) will signal the controlling CPU
+   to stop execution.  */
+#define FLGREG_ADDR(n)		(0xFFE80100 + 2*(n))
+#define FLGREG(n)		(*(volatile unsigned char *)FLGREG_ADDR (n))
+#define FLGREG_NUM		2
+
+#define CSDEV_ADDR(n)		(0xFFE80110 + 2*(n))
+#define CSDEV(n)		(*(volatile unsigned char *)CSDEV_ADDR (n))
+
+
+/* Timer interrupts 0-3, interrupt at intervals from CLK/4096 to CLK/16384.  */
+#define IRQ_RPU(n)		(60 + (n))
+#define IRQ_RPU_NUM		4
+
+/* For <asm/irq.h> */
+#define NUM_CPU_IRQS		64
+
+
+/* General-purpose timer.  */
+/* control/status register (can only be read/written via bit insns) */
+#define RPU_GTMC_ADDR		0xFFFFFB00
+#define RPU_GTMC		(*(volatile unsigned char *)RPU_GTMC_ADDR)
+#define RPU_GTMC_CE_BIT		7 /* clock enable (control) */
+#define RPU_GTMC_OV_BIT		6 /* overflow (status) */
+#define RPU_GTMC_CLK_BIT	1 /* 0 = .5 MHz CLK, 1 = 1 Mhz (control) */
+/* 32-bit count (8 least-significant bits are always zero).  */
+#define RPU_GTM_ADDR		0xFFFFFB28
+#define RPU_GTM			(*(volatile unsigned long *)RPU_GTMC_ADDR)
+
+
+/* For <asm/page.h> */
+#define PAGE_OFFSET		ERAM_ADDR /* minimum allocatable address */
+
+
+/* For <asm/entry.h> */
+/* `R0 RAM', used for a few miscellaneous variables that must be accessible
+   using a load instruction relative to R0.  The FPGA implementation
+   actually has no on-chip RAM, so we use part of main ram just after the
+   interrupt vectors.  */
+#ifdef __ASSEMBLY__
+#define R0_RAM_ADDR		lo(C_SYMBOL_NAME(_r0_ram))
+#else
+extern char _r0_ram;
+#define R0_RAM_ADDR		((unsigned long)&_r0_ram);
+#endif
+
+
+/* For <asm/param.h> */
+#ifndef HZ
+#define HZ			122 /* actually, 8.192ms ticks =~ 122.07 */
+#endif
+
+
+#endif /* __V850_FPGA85E2C_H__ */
diff --git a/include/asm-v850/gbus_int.h b/include/asm-v850/gbus_int.h
new file mode 100644
index 0000000..0c4bce7
--- /dev/null
+++ b/include/asm-v850/gbus_int.h
@@ -0,0 +1,97 @@
+/*
+ * include/asm-v850/gbus_int.h -- Midas labs GBUS interrupt support
+ *
+ *  Copyright (C) 2001,02  NEC Corporation
+ *  Copyright (C) 2001,02  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef __V850_GBUS_INT_H__
+#define __V850_GBUS_INT_H__
+
+
+/* The GBUS interrupt interface has 32 interrupts shared among 4
+   processor interrupts.  The 32 GBUS interrupts are divided into two
+   sets of 16 each, for allocating among control registers, etc (there
+   are two of each control register, with bits 0-15 controlling an
+   interrupt each).  */
+
+/* The GBUS interrupts themselves.  */
+#define IRQ_GBUS_INT(n)		(GBUS_INT_BASE_IRQ + (n))
+#define IRQ_GBUS_INT_NUM	32
+
+/* Control registers.  */
+#define GBUS_INT_STATUS_ADDR(w)	(GBUS_INT_BASE_ADDR + (w)*0x40)
+#define GBUS_INT_STATUS(w)	(*(volatile u16 *)GBUS_INT_STATUS_ADDR(w))
+#define GBUS_INT_CLEAR_ADDR(w)	(GBUS_INT_BASE_ADDR + 0x10 + (w)*0x40)
+#define GBUS_INT_CLEAR(w)	(*(volatile u16 *)GBUS_INT_CLEAR_ADDR(w))
+#define GBUS_INT_EDGE_ADDR(w)	(GBUS_INT_BASE_ADDR + 0x20 + (w)*0x40)
+#define GBUS_INT_EDGE(w)	(*(volatile u16 *)GBUS_INT_EDGE_ADDR(w))
+#define GBUS_INT_POLARITY_ADDR(w)	(GBUS_INT_BASE_ADDR + 0x30 + (w)*0x40)
+#define GBUS_INT_POLARITY(w)	(*(volatile u16 *)GBUS_INT_POLARITY_ADDR(w))
+/* This allows enabling interrupt bits in word W for interrupt GINTn.  */
+#define GBUS_INT_ENABLE_ADDR(w, n) \
+   (GBUS_INT_BASE_ADDR + 0x100 + (w)*0x10 + (n)*0x20)
+#define GBUS_INT_ENABLE(w, n)	(*(volatile u16 *)GBUS_INT_ENABLE_ADDR(w, n))
+
+/* Mapping between kernel interrupt numbers and hardware control regs/bits.  */
+#define GBUS_INT_BITS_PER_WORD	16
+#define GBUS_INT_NUM_WORDS	(IRQ_GBUS_INT_NUM / GBUS_INT_BITS_PER_WORD)
+#define GBUS_INT_IRQ_WORD(irq)	(((irq) - GBUS_INT_BASE_IRQ) >> 4)
+#define GBUS_INT_IRQ_BIT(irq)	(((irq) - GBUS_INT_BASE_IRQ) & 0xF)
+#define GBUS_INT_IRQ_MASK(irq)	(1 << GBUS_INT_IRQ_BIT(irq))
+
+
+/* Possible priorities for GBUS interrupts.  */
+#define GBUS_INT_PRIORITY_HIGH		2
+#define GBUS_INT_PRIORITY_MEDIUM	4
+#define GBUS_INT_PRIORITY_LOW		6
+
+
+#ifndef __ASSEMBLY__
+
+/* Enable interrupt handling for interrupt IRQ.  */
+extern void gbus_int_enable_irq (unsigned irq);
+/* Disable interrupt handling for interrupt IRQ.  Note that any
+   interrupts received while disabled will be delivered once the
+   interrupt is enabled again, unless they are explicitly cleared using
+   `gbus_int_clear_pending_irq'.  */
+extern void gbus_int_disable_irq (unsigned irq);
+/* Return true if interrupt handling for interrupt IRQ is enabled.  */
+extern int gbus_int_irq_enabled (unsigned irq);
+/* Disable all GBUS irqs.  */
+extern void gbus_int_disable_irqs (void);
+/* Clear any pending interrupts for IRQ.  */
+extern void gbus_int_clear_pending_irq (unsigned irq);
+/* Return true if interrupt IRQ is pending (but disabled).  */
+extern int gbus_int_irq_pending (unsigned irq);
+
+
+struct gbus_int_irq_init {
+	const char *name;	/* name of interrupt type */
+
+	/* Range of kernel irq numbers for this type:
+	   BASE, BASE+INTERVAL, ..., BASE+INTERVAL*NUM  */
+	unsigned base, num, interval;
+
+	unsigned priority;	/* interrupt priority to assign */
+};
+struct hw_interrupt_type;	/* fwd decl */
+
+/* Initialize HW_IRQ_TYPES for GBUS irqs described in array
+   INITS (which is terminated by an entry with the name field == 0).  */
+extern void gbus_int_init_irq_types (struct gbus_int_irq_init *inits,
+				     struct hw_interrupt_type *hw_irq_types);
+
+/* Initialize GBUS interrupts.  */
+extern void gbus_int_init_irqs (void);
+
+#endif /* !__ASSEMBLY__ */
+
+
+#endif /* __V850_GBUS_INT_H__ */
diff --git a/include/asm-v850/hardirq.h b/include/asm-v850/hardirq.h
new file mode 100644
index 0000000..5dfca80
--- /dev/null
+++ b/include/asm-v850/hardirq.h
@@ -0,0 +1,25 @@
+#ifndef __V850_HARDIRQ_H__
+#define __V850_HARDIRQ_H__
+
+#include <linux/config.h>
+#include <linux/threads.h>
+#include <linux/cache.h>
+
+typedef struct {
+	unsigned int __softirq_pending;
+} ____cacheline_aligned irq_cpustat_t;
+
+#include <linux/irq_cpustat.h>	/* Standard mappings for irq_cpustat_t above */
+
+#define HARDIRQ_BITS	8
+
+/*
+ * The hardirq mask has to be large enough to have
+ * space for potentially all IRQ sources in the system
+ * nesting on a single CPU:
+ */
+#if (1 << HARDIRQ_BITS) < NR_IRQS
+# error HARDIRQ_BITS is too low!
+#endif
+
+#endif /* __V850_HARDIRQ_H__ */
diff --git a/include/asm-v850/highres_timer.h b/include/asm-v850/highres_timer.h
new file mode 100644
index 0000000..486fb49
--- /dev/null
+++ b/include/asm-v850/highres_timer.h
@@ -0,0 +1,44 @@
+/*
+ * include/asm-v850/highres_timer.h -- High resolution timing routines
+ *
+ *  Copyright (C) 2001,03  NEC Electronics Corporation
+ *  Copyright (C) 2001,03  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef __V850_HIGHRES_TIMER_H__
+#define __V850_HIGHRES_TIMER_H__
+
+#ifndef __ASSEMBLY__
+#include <linux/time.h>
+#endif
+
+#include <asm/entry.h>
+
+
+/* Frequency of the `slow ticks' (one tick each time the fast-tick
+   counter overflows).  */
+#define HIGHRES_TIMER_SLOW_TICK_RATE	25
+
+/* Which timer in the V850E `Timer D' we use.  */
+#define HIGHRES_TIMER_TIMER_D_UNIT	3
+
+
+#ifndef __ASSEMBLY__
+
+extern void highres_timer_start (void), highres_timer_stop (void);
+extern void highres_timer_reset (void);
+extern void highres_timer_read_ticks (u32 *slow_ticks, u32 *fast_ticks);
+extern void highres_timer_ticks_to_timeval (u32 slow_ticks, u32 fast_ticks,
+					    struct timeval *tv);
+extern void highres_timer_read (struct timeval *tv);
+
+#endif /* !__ASSEMBLY__ */
+
+
+#endif /* __V850_HIGHRES_TIMER_H__ */
diff --git a/include/asm-v850/hw_irq.h b/include/asm-v850/hw_irq.h
new file mode 100644
index 0000000..4bdc98e
--- /dev/null
+++ b/include/asm-v850/hw_irq.h
@@ -0,0 +1,8 @@
+#ifndef __V850_HW_IRQ_H__
+#define __V850_HW_IRQ_H__
+
+extern inline void hw_resend_irq (struct hw_interrupt_type *h, unsigned int i)
+{
+}
+
+#endif /* __V850_HW_IRQ_H__ */
diff --git a/include/asm-v850/io.h b/include/asm-v850/io.h
new file mode 100644
index 0000000..bb5efd1
--- /dev/null
+++ b/include/asm-v850/io.h
@@ -0,0 +1,133 @@
+/*
+ * include/asm-v850/io.h -- Misc I/O operations
+ *
+ *  Copyright (C) 2001,02,03,04  NEC Electronics Corporation
+ *  Copyright (C) 2001,02,03,04  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef __V850_IO_H__
+#define __V850_IO_H__
+
+#define IO_SPACE_LIMIT 0xFFFFFFFF
+
+#define readb(addr) \
+  ({ unsigned char __v = (*(volatile unsigned char *) (addr)); __v; })
+#define readw(addr) \
+  ({ unsigned short __v = (*(volatile unsigned short *) (addr)); __v; })
+#define readl(addr) \
+  ({ unsigned long __v = (*(volatile unsigned long *) (addr)); __v; })
+
+#define readb_relaxed(a) readb(a)
+#define readw_relaxed(a) readw(a)
+#define readl_relaxed(a) readl(a)
+
+#define writeb(b, addr) \
+  (void)((*(volatile unsigned char *) (addr)) = (b))
+#define writew(b, addr) \
+  (void)((*(volatile unsigned short *) (addr)) = (b))
+#define writel(b, addr) \
+  (void)((*(volatile unsigned int *) (addr)) = (b))
+
+#define __raw_readb readb
+#define __raw_readw readw
+#define __raw_readl readl
+#define __raw_writeb writeb
+#define __raw_writew writew
+#define __raw_writel writel
+
+#define inb(addr)	readb (addr)
+#define inw(addr)	readw (addr)
+#define inl(addr)	readl (addr)
+#define outb(x, addr)	((void) writeb (x, addr))
+#define outw(x, addr)	((void) writew (x, addr))
+#define outl(x, addr)	((void) writel (x, addr))
+
+#define inb_p(port)		inb((port))
+#define outb_p(val, port)	outb((val), (port))
+#define inw_p(port)		inw((port))
+#define outw_p(val, port)	outw((val), (port))
+#define inl_p(port)		inl((port))
+#define outl_p(val, port)	outl((val), (port))
+
+static inline void insb (unsigned long port, void *dst, unsigned long count)
+{
+	unsigned char *p = dst;
+	while (count--)
+		*p++ = inb (port);
+}
+static inline void insw (unsigned long port, void *dst, unsigned long count)
+{
+	unsigned short *p = dst;
+	while (count--)
+		*p++ = inw (port);
+}
+static inline void insl (unsigned long port, void *dst, unsigned long count)
+{
+	unsigned long *p = dst;
+	while (count--)
+		*p++ = inl (port);
+}
+
+static inline void
+outsb (unsigned long port, const void *src, unsigned long count)
+{
+	const unsigned char *p = src;
+	while (count--)
+		outb (*p++, port);
+}
+static inline void
+outsw (unsigned long port, const void *src, unsigned long count)
+{
+	const unsigned short *p = src;
+	while (count--)
+		outw (*p++, port);
+}
+static inline void
+outsl (unsigned long port, const void *src, unsigned long count)
+{
+	const unsigned long *p = src;
+	while (count--)
+		outl (*p++, port);
+}
+
+#define iounmap(addr)				((void)0)
+#define ioremap(physaddr, size)			(physaddr)
+#define ioremap_nocache(physaddr, size)		(physaddr)
+#define ioremap_writethrough(physaddr, size)	(physaddr)
+#define ioremap_fullcache(physaddr, size)	(physaddr)
+
+#define mmiowb()
+
+#define page_to_phys(page)      ((page - mem_map) << PAGE_SHIFT)
+#if 0
+/* This is really stupid; don't define it.  */
+#define page_to_bus(page)       page_to_phys (page)
+#endif
+
+/* Conversion between virtual and physical mappings.  */
+#define mm_ptov(addr)		((void *)__phys_to_virt (addr))
+#define mm_vtop(addr)		((unsigned long)__virt_to_phys (addr))
+#define phys_to_virt(addr)	((void *)__phys_to_virt (addr))
+#define virt_to_phys(addr)	((unsigned long)__virt_to_phys (addr))
+
+#define memcpy_fromio(dst, src, len) memcpy (dst, (void *)src, len)
+#define memcpy_toio(dst, src, len) memcpy ((void *)dst, src, len)
+
+/*
+ * Convert a physical pointer to a virtual kernel pointer for /dev/mem
+ * access
+ */
+#define xlate_dev_mem_ptr(p)	__va(p)
+
+/*
+ * Convert a virtual cached pointer to an uncached pointer
+ */
+#define xlate_dev_kmem_ptr(p)	p
+
+#endif /* __V850_IO_H__ */
diff --git a/include/asm-v850/ioctl.h b/include/asm-v850/ioctl.h
new file mode 100644
index 0000000..1765df6
--- /dev/null
+++ b/include/asm-v850/ioctl.h
@@ -0,0 +1,80 @@
+/* $Id: ioctl.h,v 1.1 2002/09/28 14:58:41 gerg Exp $
+ *
+ * linux/ioctl.h for Linux by H.H. Bergman.
+ */
+
+#ifndef _V850_IOCTL_H
+#define _V850_IOCTL_H
+
+/* ioctl command encoding: 32 bits total, command in lower 16 bits,
+ * size of the parameter structure in the lower 14 bits of the
+ * upper 16 bits.
+ * Encoding the size of the parameter structure in the ioctl request
+ * is useful for catching programs compiled with old versions
+ * and to avoid overwriting user space outside the user buffer area.
+ * The highest 2 bits are reserved for indicating the ``access mode''.
+ * NOTE: This limits the max parameter size to 16kB -1 !
+ */
+
+/*
+ * I don't really have any idea about what this should look like, so
+ * for the time being, this is heavily based on the PC definitions.
+ */
+
+/*
+ * The following is for compatibility across the various Linux
+ * platforms.  The i386 ioctl numbering scheme doesn't really enforce
+ * a type field.  De facto, however, the top 8 bits of the lower 16
+ * bits are indeed used as a type field, so we might just as well make
+ * this explicit here.  Please be sure to use the decoding macros
+ * below from now on.
+ */
+#define _IOC_NRBITS	8
+#define _IOC_TYPEBITS	8
+#define _IOC_SIZEBITS	14
+#define _IOC_DIRBITS	2
+
+#define _IOC_NRMASK	((1 << _IOC_NRBITS)-1)
+#define _IOC_TYPEMASK	((1 << _IOC_TYPEBITS)-1)
+#define _IOC_SIZEMASK	((1 << _IOC_SIZEBITS)-1)
+#define _IOC_DIRMASK	((1 << _IOC_DIRBITS)-1)
+
+#define _IOC_NRSHIFT	0
+#define _IOC_TYPESHIFT	(_IOC_NRSHIFT+_IOC_NRBITS)
+#define _IOC_SIZESHIFT	(_IOC_TYPESHIFT+_IOC_TYPEBITS)
+#define _IOC_DIRSHIFT	(_IOC_SIZESHIFT+_IOC_SIZEBITS)
+
+/*
+ * Direction bits.
+ */
+#define _IOC_NONE	0U
+#define _IOC_WRITE	1U
+#define _IOC_READ	2U
+
+#define _IOC(dir,type,nr,size) \
+	(((dir)  << _IOC_DIRSHIFT) | \
+	 ((type) << _IOC_TYPESHIFT) | \
+	 ((nr)   << _IOC_NRSHIFT) | \
+	 ((size) << _IOC_SIZESHIFT))
+
+/* used to create numbers */
+#define _IO(type,nr)		_IOC(_IOC_NONE,(type),(nr),0)
+#define _IOR(type,nr,size)	_IOC(_IOC_READ,(type),(nr),sizeof(size))
+#define _IOW(type,nr,size)	_IOC(_IOC_WRITE,(type),(nr),sizeof(size))
+#define _IOWR(type,nr,size)	_IOC(_IOC_READ|_IOC_WRITE,(type),(nr),sizeof(size))
+
+/* used to decode ioctl numbers.. */
+#define _IOC_DIR(nr)		(((nr) >> _IOC_DIRSHIFT) & _IOC_DIRMASK)
+#define _IOC_TYPE(nr)		(((nr) >> _IOC_TYPESHIFT) & _IOC_TYPEMASK)
+#define _IOC_NR(nr)		(((nr) >> _IOC_NRSHIFT) & _IOC_NRMASK)
+#define _IOC_SIZE(nr)		(((nr) >> _IOC_SIZESHIFT) & _IOC_SIZEMASK)
+
+/* ...and for the drivers/sound files... */
+
+#define IOC_IN		(_IOC_WRITE << _IOC_DIRSHIFT)
+#define IOC_OUT		(_IOC_READ << _IOC_DIRSHIFT)
+#define IOC_INOUT	((_IOC_WRITE|_IOC_READ) << _IOC_DIRSHIFT)
+#define IOCSIZE_MASK	(_IOC_SIZEMASK << _IOC_SIZESHIFT)
+#define IOCSIZE_SHIFT	(_IOC_SIZESHIFT)
+
+#endif /* __V850_IOCTL_H__ */
diff --git a/include/asm-v850/ioctls.h b/include/asm-v850/ioctls.h
new file mode 100644
index 0000000..05c0dc9
--- /dev/null
+++ b/include/asm-v850/ioctls.h
@@ -0,0 +1,80 @@
+#ifndef __V850_IOCTLS_H__
+#define __V850_IOCTLS_H__
+
+#include <asm/ioctl.h>
+
+/* 0x54 is just a magic number to make these relatively unique ('T') */
+
+#define TCGETS		0x5401
+#define TCSETS		0x5402
+#define TCSETSW		0x5403
+#define TCSETSF		0x5404
+#define TCGETA		0x5405
+#define TCSETA		0x5406
+#define TCSETAW		0x5407
+#define TCSETAF		0x5408
+#define TCSBRK		0x5409
+#define TCXONC		0x540A
+#define TCFLSH		0x540B
+#define TIOCEXCL	0x540C
+#define TIOCNXCL	0x540D
+#define TIOCSCTTY	0x540E
+#define TIOCGPGRP	0x540F
+#define TIOCSPGRP	0x5410
+#define TIOCOUTQ	0x5411
+#define TIOCSTI		0x5412
+#define TIOCGWINSZ	0x5413
+#define TIOCSWINSZ	0x5414
+#define TIOCMGET	0x5415
+#define TIOCMBIS	0x5416
+#define TIOCMBIC	0x5417
+#define TIOCMSET	0x5418
+#define TIOCGSOFTCAR	0x5419
+#define TIOCSSOFTCAR	0x541A
+#define FIONREAD	0x541B
+#define TIOCINQ		FIONREAD
+#define TIOCLINUX	0x541C
+#define TIOCCONS	0x541D
+#define TIOCGSERIAL	0x541E
+#define TIOCSSERIAL	0x541F
+#define TIOCPKT		0x5420
+#define FIONBIO		0x5421
+#define TIOCNOTTY	0x5422
+#define TIOCSETD	0x5423
+#define TIOCGETD	0x5424
+#define TCSBRKP		0x5425	/* Needed for POSIX tcsendbreak() */
+#define TIOCSBRK	0x5427  /* BSD compatibility */
+#define TIOCCBRK	0x5428  /* BSD compatibility */
+#define TIOCGSID	0x5429  /* Return the session ID of FD */
+#define TIOCGPTN	_IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */
+#define TIOCSPTLCK	_IOW('T',0x31, int)  /* Lock/unlock Pty */
+
+#define FIONCLEX	0x5450  /* these numbers need to be adjusted. */
+#define FIOCLEX		0x5451
+#define FIOASYNC	0x5452
+#define TIOCSERCONFIG	0x5453
+#define TIOCSERGWILD	0x5454
+#define TIOCSERSWILD	0x5455
+#define TIOCGLCKTRMIOS	0x5456
+#define TIOCSLCKTRMIOS	0x5457
+#define TIOCSERGSTRUCT	0x5458 /* For debugging only */
+#define TIOCSERGETLSR   0x5459 /* Get line status register */
+#define TIOCSERGETMULTI 0x545A /* Get multiport config  */
+#define TIOCSERSETMULTI 0x545B /* Set multiport config */
+
+#define TIOCMIWAIT	0x545C	/* wait for a change on serial input line(s) */
+#define TIOCGICOUNT	0x545D	/* read serial port inline interrupt counts */
+#define FIOQSIZE	0x545E
+
+/* Used for packet mode */
+#define TIOCPKT_DATA		 0
+#define TIOCPKT_FLUSHREAD	 1
+#define TIOCPKT_FLUSHWRITE	 2
+#define TIOCPKT_STOP		 4
+#define TIOCPKT_START		 8
+#define TIOCPKT_NOSTOP		16
+#define TIOCPKT_DOSTOP		32
+
+#define TIOCSER_TEMT    0x01	/* Transmitter physically empty */
+
+#endif /* __V850_IOCTLS_H__ */
diff --git a/include/asm-v850/ipc.h b/include/asm-v850/ipc.h
new file mode 100644
index 0000000..a46e3d9
--- /dev/null
+++ b/include/asm-v850/ipc.h
@@ -0,0 +1 @@
+#include <asm-generic/ipc.h>
diff --git a/include/asm-v850/ipcbuf.h b/include/asm-v850/ipcbuf.h
new file mode 100644
index 0000000..d8cbe98
--- /dev/null
+++ b/include/asm-v850/ipcbuf.h
@@ -0,0 +1,29 @@
+#ifndef __V850E_IPCBUF_H__
+#define __V850E_IPCBUF_H__
+
+/*
+ * The user_ipc_perm structure for v850e architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 32-bit mode_t and seq
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct ipc64_perm
+{
+	__kernel_key_t		key;
+	__kernel_uid32_t	uid;
+	__kernel_gid32_t	gid;
+	__kernel_uid32_t	cuid;
+	__kernel_gid32_t	cgid;
+	__kernel_mode_t		mode;
+	unsigned short		__pad1;
+	unsigned short		seq;
+	unsigned short		__pad2;
+	unsigned long		__unused1;
+	unsigned long		__unused2;
+};
+
+#endif /* __V850E_IPCBUF_H__ */
diff --git a/include/asm-v850/irq.h b/include/asm-v850/irq.h
new file mode 100644
index 0000000..4443115
--- /dev/null
+++ b/include/asm-v850/irq.h
@@ -0,0 +1,69 @@
+/*
+ * include/asm-v850/irq.h -- Machine interrupt handling
+ *
+ *  Copyright (C) 2001,02,04  NEC Electronics Corporation
+ *  Copyright (C) 2001,02,04  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef __V850_IRQ_H__
+#define __V850_IRQ_H__
+
+#include <asm/machdep.h>
+
+/* Default NUM_MACH_IRQS.  */
+#ifndef NUM_MACH_IRQS
+#define NUM_MACH_IRQS	NUM_CPU_IRQS
+#endif
+
+/* NMIs have IRQ numbers from FIRST_NMI to FIRST_NMI+NUM_NMIS-1.  */
+#define FIRST_NMI	NUM_MACH_IRQS
+#define IRQ_NMI(n)	(FIRST_NMI + (n))
+/* v850 processors have 3 non-maskable interrupts.  */
+#define NUM_NMIS	3
+
+/* Includes both maskable and non-maskable irqs.  */
+#define NR_IRQS		(NUM_MACH_IRQS + NUM_NMIS)
+
+
+#ifndef __ASSEMBLY__
+
+struct pt_regs;
+struct hw_interrupt_type;
+struct irqaction;
+
+#define irq_canonicalize(irq)	(irq)
+
+/* Initialize irq handling for IRQs.
+   BASE_IRQ, BASE_IRQ+INTERVAL, ..., BASE_IRQ+NUM*INTERVAL
+   to IRQ_TYPE.  An IRQ_TYPE of 0 means to use a generic interrupt type.  */
+extern void
+init_irq_handlers (int base_irq, int num, int interval,
+		   struct hw_interrupt_type *irq_type);
+
+typedef void (*irq_handler_t)(int irq, void *data, struct pt_regs *regs);
+
+/* Handle interrupt IRQ.  REGS are the registers at the time of ther
+   interrupt.  */
+extern unsigned int handle_irq (int irq, struct pt_regs *regs);
+
+
+/* Enable interrupt handling on an irq.  */
+extern void enable_irq(unsigned int irq);
+
+/* Disable an irq and wait for completion.  */
+extern void disable_irq (unsigned int irq);
+
+/* Disable an irq without waiting. */
+extern void disable_irq_nosync (unsigned int irq);
+
+extern int handle_IRQ_event(unsigned int, struct pt_regs *, struct irqaction *);
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* __V850_IRQ_H__ */
diff --git a/include/asm-v850/kmap_types.h b/include/asm-v850/kmap_types.h
new file mode 100644
index 0000000..3288976
--- /dev/null
+++ b/include/asm-v850/kmap_types.h
@@ -0,0 +1,19 @@
+#ifndef __V850_KMAP_TYPES_H__
+#define __V850_KMAP_TYPES_H__
+
+enum km_type {
+	KM_BOUNCE_READ,
+	KM_SKB_SUNRPC_DATA,
+	KM_SKB_DATA_SOFTIRQ,
+	KM_USER0,
+	KM_USER1,
+	KM_BIO_SRC_IRQ,
+	KM_BIO_DST_IRQ,
+	KM_PTE0,
+	KM_PTE1,
+	KM_IRQ0,
+	KM_IRQ1,
+	KM_TYPE_NR
+};
+
+#endif /* __V850_KMAP_TYPES_H__ */
diff --git a/include/asm-v850/linkage.h b/include/asm-v850/linkage.h
new file mode 100644
index 0000000..291c2d0
--- /dev/null
+++ b/include/asm-v850/linkage.h
@@ -0,0 +1,6 @@
+#ifndef __ASM_LINKAGE_H
+#define __ASM_LINKAGE_H
+
+/* Nothing to see here... */
+
+#endif
diff --git a/include/asm-v850/local.h b/include/asm-v850/local.h
new file mode 100644
index 0000000..705148a
--- /dev/null
+++ b/include/asm-v850/local.h
@@ -0,0 +1,6 @@
+#ifndef __V850_LOCAL_H__
+#define __V850_LOCAL_H__
+
+#include <asm-generic/local.h>
+
+#endif /* __V850_LOCAL_H__ */
diff --git a/include/asm-v850/ma.h b/include/asm-v850/ma.h
new file mode 100644
index 0000000..89e6647
--- /dev/null
+++ b/include/asm-v850/ma.h
@@ -0,0 +1,101 @@
+/*
+ * include/asm-v850/ma.h -- V850E/MA series of cpu chips
+ *
+ *  Copyright (C) 2001,02,03  NEC Electronics Corporation
+ *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef __V850_MA_H__
+#define __V850_MA_H__
+
+/* The MA series uses the V850E cpu core.  */
+#include <asm/v850e.h>
+
+
+/* For <asm/entry.h> */
+/* We use on-chip RAM, for a few miscellaneous variables that must be
+   accessible using a load instruction relative to R0.  The amount
+   varies between chip models, but there's always at least 4K, and it
+   should always start at FFFFC000.  */
+#define R0_RAM_ADDR			0xFFFFC000
+
+
+/* MA series UART details.  */
+#define V850E_UART_BASE_FREQ		CPU_CLOCK_FREQ
+
+/* This is a function that gets called before configuring the UART.  */
+#define V850E_UART_PRE_CONFIGURE	ma_uart_pre_configure
+#ifndef __ASSEMBLY__
+extern void ma_uart_pre_configure (unsigned chan,
+				   unsigned cflags, unsigned baud);
+#endif
+
+
+/* MA series timer C details.  */
+#define V850E_TIMER_C_BASE_ADDR		0xFFFFF600
+
+
+/* MA series timer D details.  */
+#define V850E_TIMER_D_BASE_ADDR		0xFFFFF540
+#define V850E_TIMER_D_TMD_BASE_ADDR 	(V850E_TIMER_D_BASE_ADDR + 0x0)
+#define V850E_TIMER_D_CMD_BASE_ADDR 	(V850E_TIMER_D_BASE_ADDR + 0x2)
+#define V850E_TIMER_D_TMCD_BASE_ADDR 	(V850E_TIMER_D_BASE_ADDR + 0x4)
+
+#define V850E_TIMER_D_BASE_FREQ		CPU_CLOCK_FREQ
+
+
+/* Port 0 */
+/* Direct I/O.  Bits 0-7 are pins P00-P07.  */
+#define MA_PORT0_IO_ADDR		0xFFFFF400
+#define MA_PORT0_IO			(*(volatile u8 *)MA_PORT0_IO_ADDR)
+/* Port mode (for direct I/O, 0 = output, 1 = input).  */
+#define MA_PORT0_PM_ADDR		0xFFFFF420
+#define MA_PORT0_PM			(*(volatile u8 *)MA_PORT0_PM_ADDR)
+/* Port mode control (0 = direct I/O mode, 1 = alternative I/O mode).  */
+#define MA_PORT0_PMC_ADDR		0xFFFFF440
+#define MA_PORT0_PMC			(*(volatile u8 *)MA_PORT0_PMC_ADDR)
+/* Port function control (for P04-P07, 0 = IRQ, 1 = DMARQ).  */
+#define MA_PORT0_PFC_ADDR		0xFFFFF460
+#define MA_PORT0_PFC			(*(volatile u8 *)MA_PORT0_PFC_ADDR)
+
+/* Port 1 */
+/* Direct I/O.  Bits 0-3 are pins P10-P13.  */
+#define MA_PORT1_IO_ADDR		0xFFFFF402
+#define MA_PORT1_IO			(*(volatile u8 *)MA_PORT1_IO_ADDR)
+/* Port mode (for direct I/O, 0 = output, 1 = input).  */
+#define MA_PORT1_PM_ADDR		0xFFFFF420
+#define MA_PORT1_PM			(*(volatile u8 *)MA_PORT1_PM_ADDR)
+/* Port mode control (0 = direct I/O mode, 1 = alternative I/O mode).  */
+#define MA_PORT1_PMC_ADDR		0xFFFFF442
+#define MA_PORT1_PMC			(*(volatile u8 *)MA_PORT1_PMC_ADDR)
+
+/* Port 4 */
+/* Direct I/O.  Bits 0-5 are pins P40-P45.  */
+#define MA_PORT4_IO_ADDR		0xFFFFF408
+#define MA_PORT4_IO			(*(volatile u8 *)MA_PORT4_IO_ADDR)
+/* Port mode (for direct I/O, 0 = output, 1 = input).  */
+#define MA_PORT4_PM_ADDR		0xFFFFF428
+#define MA_PORT4_PM			(*(volatile u8 *)MA_PORT4_PM_ADDR)
+/* Port mode control (0 = direct I/O mode, 1 = alternative I/O mode).  */
+#define MA_PORT4_PMC_ADDR		0xFFFFF448
+#define MA_PORT4_PMC			(*(volatile u8 *)MA_PORT4_PMC_ADDR)
+/* Port function control (for serial interfaces, 0 = CSI, 1 = UART).  */
+#define MA_PORT4_PFC_ADDR		0xFFFFF468
+#define MA_PORT4_PFC			(*(volatile u8 *)MA_PORT4_PFC_ADDR)
+
+
+#ifndef __ASSEMBLY__
+
+/* Initialize MA chip interrupts.  */
+extern void ma_init_irqs (void);
+
+#endif /* !__ASSEMBLY__ */
+
+
+#endif /* __V850_MA_H__ */
diff --git a/include/asm-v850/ma1.h b/include/asm-v850/ma1.h
new file mode 100644
index 0000000..ede1f1d
--- /dev/null
+++ b/include/asm-v850/ma1.h
@@ -0,0 +1,50 @@
+/*
+ * include/asm-v850/ma1.h -- V850E/MA1 cpu chip
+ *
+ *  Copyright (C) 2001,02,03  NEC Electronics Corporation
+ *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef __V850_MA1_H__
+#define __V850_MA1_H__
+
+/* Inherit more generic details from MA series.  */
+#include <asm/ma.h>
+
+
+#define CPU_MODEL	"v850e/ma1"
+#define CPU_MODEL_LONG	"NEC V850E/MA1"
+
+
+/* Hardware-specific interrupt numbers (in the kernel IRQ namespace).  */
+#define IRQ_INTOV(n)	(n)	/* 0-3 */
+#define IRQ_INTOV_NUM	4
+#define IRQ_INTP(n)	(0x4  + (n)) /* Pnnn (pin) interrupts */
+#define IRQ_INTP_NUM	24
+#define IRQ_INTCMD(n)	(0x1c + (n)) /* interval timer interrupts 0-3 */
+#define IRQ_INTCMD_NUM	4
+#define IRQ_INTDMA(n)	(0x20 + (n)) /* DMA interrupts 0-3 */
+#define IRQ_INTDMA_NUM	4
+#define IRQ_INTCSI(n)	(0x24 + (n)*4)/* CSI 0-2 transmit/receive completion */
+#define IRQ_INTCSI_NUM	3
+#define IRQ_INTSER(n)	(0x25 + (n)*4) /* UART 0-2 reception error */
+#define IRQ_INTSER_NUM	3
+#define IRQ_INTSR(n)	(0x26 + (n)*4) /* UART 0-2 reception completion */
+#define IRQ_INTSR_NUM	3
+#define IRQ_INTST(n)	(0x27 + (n)*4) /* UART 0-2 transmission completion */
+#define IRQ_INTST_NUM	3
+
+#define NUM_CPU_IRQS	0x30
+
+
+/* The MA1 has a UART with 3 channels.  */
+#define V850E_UART_NUM_CHANNELS	3
+
+
+#endif /* __V850_MA1_H__ */
diff --git a/include/asm-v850/machdep.h b/include/asm-v850/machdep.h
new file mode 100644
index 0000000..98d8bf6
--- /dev/null
+++ b/include/asm-v850/machdep.h
@@ -0,0 +1,61 @@
+/*
+ * include/asm-v850/machdep.h -- Machine-dependent definitions
+ *
+ *  Copyright (C) 2001,02,03  NEC Electronics Corporation
+ *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef __V850_MACHDEP_H__
+#define __V850_MACHDEP_H__
+
+#include <linux/config.h>
+
+/* chips */
+#ifdef CONFIG_V850E_MA1
+#include <asm/ma1.h>
+#endif
+#ifdef CONFIG_V850E_ME2
+#include <asm/me2.h>
+#endif
+#ifdef CONFIG_V850E_TEG
+#include <asm/teg.h>
+#endif
+
+/* These are both chips _and_ platforms, so put them in the middle... */
+#ifdef CONFIG_V850E2_ANNA
+#include <asm/anna.h>
+#endif
+#ifdef CONFIG_V850E_AS85EP1
+#include <asm/as85ep1.h>
+#endif
+
+/* platforms */
+#ifdef CONFIG_RTE_CB_MA1
+#include <asm/rte_ma1_cb.h>
+#endif
+#ifdef CONFIG_RTE_CB_ME2
+#include <asm/rte_me2_cb.h>
+#endif
+#ifdef CONFIG_RTE_CB_NB85E
+#include <asm/rte_nb85e_cb.h>
+#endif
+#ifdef CONFIG_V850E_SIM
+#include <asm/sim.h>
+#endif
+#ifdef CONFIG_V850E2_SIM85E2C
+#include <asm/sim85e2c.h>
+#endif
+#ifdef CONFIG_V850E2_SIM85E2S
+#include <asm/sim85e2s.h>
+#endif
+#ifdef CONFIG_V850E2_FPGA85E2C
+#include <asm/fpga85e2c.h>
+#endif
+
+#endif /* __V850_MACHDEP_H__ */
diff --git a/include/asm-v850/macrology.h b/include/asm-v850/macrology.h
new file mode 100644
index 0000000..37abf87
--- /dev/null
+++ b/include/asm-v850/macrology.h
@@ -0,0 +1,17 @@
+/*
+ * include/asm-v850/macrology.h -- Various useful CPP macros
+ *
+ *  Copyright (C) 2001  NEC Corporation
+ *  Copyright (C) 2001  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#define macrology_paste(arg1, arg2)	macrology_paste_1(arg1, arg2)
+#define macrology_paste_1(arg1, arg2)	arg1 ## arg2
+#define macrology_stringify(sym)	macrology_stringify_1(sym)
+#define macrology_stringify_1(sym)	#sym
diff --git a/include/asm-v850/me2.h b/include/asm-v850/me2.h
new file mode 100644
index 0000000..ac7c9ce
--- /dev/null
+++ b/include/asm-v850/me2.h
@@ -0,0 +1,182 @@
+/*
+ * include/asm-v850/me2.h -- V850E/ME2 cpu chip
+ *
+ *  Copyright (C) 2001,02,03  NEC Electronics Corporation
+ *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef __V850_ME2_H__
+#define __V850_ME2_H__
+
+#include <asm/v850e.h>
+#include <asm/v850e_cache.h>
+
+
+#define CPU_MODEL	"v850e/me2"
+#define CPU_MODEL_LONG	"NEC V850E/ME2"
+
+
+/* Hardware-specific interrupt numbers (in the kernel IRQ namespace).  */
+#define IRQ_INTP(n)       (n) /* Pnnn (pin) interrupts */
+#define IRQ_INTP_NUM      31
+#define IRQ_INTCMD(n)     (0x31 + (n)) /* interval timer interrupts 0-3 */
+#define IRQ_INTCMD_NUM    4
+#define IRQ_INTDMA(n)     (0x41 + (n)) /* DMA interrupts 0-3 */
+#define IRQ_INTDMA_NUM    4
+#define IRQ_INTUBTIRE(n)  (0x49 + (n)*5)/* UARTB 0-1 reception error */
+#define IRQ_INTUBTIRE_NUM 2
+#define IRQ_INTUBTIR(n)   (0x4a + (n)*5) /* UARTB 0-1 reception complete */
+#define IRQ_INTUBTIR_NUM  2
+#define IRQ_INTUBTIT(n)   (0x4b + (n)*5) /* UARTB 0-1 transmission complete */
+#define IRQ_INTUBTIT_NUM  2
+#define IRQ_INTUBTIF(n)   (0x4c + (n)*5) /* UARTB 0-1 FIFO trans. complete */
+#define IRQ_INTUBTIF_NUM  2
+#define IRQ_INTUBTITO(n)  (0x4d + (n)*5) /* UARTB 0-1 reception timeout */
+#define IRQ_INTUBTITO_NUM 2
+
+/* For <asm/irq.h> */
+#define NUM_CPU_IRQS		0x59 /* V850E/ME2 */
+
+
+/* For <asm/entry.h> */
+/* We use on-chip RAM, for a few miscellaneous variables that must be
+   accessible using a load instruction relative to R0.  */
+#define R0_RAM_ADDR			0xFFFFB000 /* V850E/ME2 */
+
+
+/* V850E/ME2 UARTB details.*/
+#define V850E_UART_NUM_CHANNELS		2
+#define V850E_UARTB_BASE_FREQ		(CPU_CLOCK_FREQ / 4)
+
+/* This is a function that gets called before configuring the UART.  */
+#define V850E_UART_PRE_CONFIGURE	me2_uart_pre_configure
+#ifndef __ASSEMBLY__
+extern void me2_uart_pre_configure (unsigned chan,
+				    unsigned cflags, unsigned baud);
+#endif /* __ASSEMBLY__ */
+
+
+/* V850E/ME2 timer C details.  */
+#define V850E_TIMER_C_BASE_ADDR		0xFFFFF600
+
+
+/* V850E/ME2 timer D details.  */
+#define V850E_TIMER_D_BASE_ADDR		0xFFFFF540
+#define V850E_TIMER_D_TMD_BASE_ADDR	(V850E_TIMER_D_BASE_ADDR + 0x0)
+#define V850E_TIMER_D_CMD_BASE_ADDR 	(V850E_TIMER_D_BASE_ADDR + 0x2)
+#define V850E_TIMER_D_TMCD_BASE_ADDR	(V850E_TIMER_D_BASE_ADDR + 0x4)
+
+#define V850E_TIMER_D_BASE_FREQ		(CPU_CLOCK_FREQ / 2)
+
+
+/* Select iRAM mode.  */
+#define ME2_IRAMM_ADDR			0xFFFFF80A
+#define ME2_IRAMM			(*(volatile u8*)ME2_IRAMM_ADDR)
+
+
+/* Interrupt edge-detection configuration.  INTF(n) and INTR(n) are only
+   valid for n == 1, 2, or 5.  */
+#define ME2_INTF_ADDR(n)		(0xFFFFFC00 + (n) * 0x2)
+#define ME2_INTF(n)			(*(volatile u8*)ME2_INTF_ADDR(n))
+#define ME2_INTR_ADDR(n)		(0xFFFFFC20 + (n) * 0x2)
+#define ME2_INTR(n)			(*(volatile u8*)ME2_INTR_ADDR(n))
+#define ME2_INTFAL_ADDR			0xFFFFFC10
+#define ME2_INTFAL			(*(volatile u8*)ME2_INTFAL_ADDR)
+#define ME2_INTRAL_ADDR			0xFFFFFC30
+#define ME2_INTRAL			(*(volatile u8*)ME2_INTRAL_ADDR)
+#define ME2_INTFDH_ADDR			0xFFFFFC16
+#define ME2_INTFDH			(*(volatile u16*)ME2_INTFDH_ADDR)
+#define ME2_INTRDH_ADDR			0xFFFFFC36
+#define ME2_INTRDH			(*(volatile u16*)ME2_INTRDH_ADDR)
+#define ME2_SESC_ADDR(n)		(0xFFFFF609 + (n) * 0x10)
+#define ME2_SESC(n)			(*(volatile u8*)ME2_SESC_ADDR(n))
+#define ME2_SESA10_ADDR			0xFFFFF5AD
+#define ME2_SESA10			(*(volatile u8*)ME2_SESA10_ADDR)
+#define ME2_SESA11_ADDR			0xFFFFF5DD
+#define ME2_SESA11			(*(volatile u8*)ME2_SESA11_ADDR)
+
+
+/* Port 1 */
+/* Direct I/O.  Bits 0-3 are pins P10-P13.  */
+#define ME2_PORT1_IO_ADDR		0xFFFFF402
+#define ME2_PORT1_IO			(*(volatile u8 *)ME2_PORT1_IO_ADDR)
+/* Port mode (for direct I/O, 0 = output, 1 = input).  */
+#define ME2_PORT1_PM_ADDR		0xFFFFF422
+#define ME2_PORT1_PM			(*(volatile u8 *)ME2_PORT1_PM_ADDR)
+/* Port mode control (0 = direct I/O mode, 1 = alternative I/O mode).  */
+#define ME2_PORT1_PMC_ADDR		0xFFFFF442
+#define ME2_PORT1_PMC			(*(volatile u8 *)ME2_PORT1_PMC_ADDR)
+/* Port function control (for serial interfaces, 0 = CSI30, 1 = UARTB0 ).  */
+#define ME2_PORT1_PFC_ADDR		0xFFFFF462
+#define ME2_PORT1_PFC			(*(volatile u8 *)ME2_PORT1_PFC_ADDR)
+
+/* Port 2 */
+/* Direct I/O.  Bits 0-3 are pins P20-P25.  */
+#define ME2_PORT2_IO_ADDR		0xFFFFF404
+#define ME2_PORT2_IO			(*(volatile u8 *)ME2_PORT2_IO_ADDR)
+/* Port mode (for direct I/O, 0 = output, 1 = input).  */
+#define ME2_PORT2_PM_ADDR		0xFFFFF424
+#define ME2_PORT2_PM			(*(volatile u8 *)ME2_PORT2_PM_ADDR)
+/* Port mode control (0 = direct I/O mode, 1 = alternative I/O mode).  */
+#define ME2_PORT2_PMC_ADDR		0xFFFFF444
+#define ME2_PORT2_PMC			(*(volatile u8 *)ME2_PORT2_PMC_ADDR)
+/* Port function control (for serial interfaces, 0 = INTP2x, 1 = UARTB1 ).  */
+#define ME2_PORT2_PFC_ADDR		0xFFFFF464
+#define ME2_PORT2_PFC			(*(volatile u8 *)ME2_PORT2_PFC_ADDR)
+
+/* Port 5 */
+/* Direct I/O.  Bits 0-5 are pins P50-P55.  */
+#define ME2_PORT5_IO_ADDR		0xFFFFF40A
+#define ME2_PORT5_IO			(*(volatile u8 *)ME2_PORT5_IO_ADDR)
+/* Port mode (for direct I/O, 0 = output, 1 = input).  */
+#define ME2_PORT5_PM_ADDR		0xFFFFF42A
+#define ME2_PORT5_PM			(*(volatile u8 *)ME2_PORT5_PM_ADDR)
+/* Port mode control (0 = direct I/O mode, 1 = alternative I/O mode).  */
+#define ME2_PORT5_PMC_ADDR		0xFFFFF44A
+#define ME2_PORT5_PMC			(*(volatile u8 *)ME2_PORT5_PMC_ADDR)
+/* Port function control ().  */
+#define ME2_PORT5_PFC_ADDR		0xFFFFF46A
+#define ME2_PORT5_PFC			(*(volatile u8 *)ME2_PORT5_PFC_ADDR)
+
+/* Port 6 */
+/* Direct I/O.  Bits 5-7 are pins P65-P67.  */
+#define ME2_PORT6_IO_ADDR		0xFFFFF40C
+#define ME2_PORT6_IO			(*(volatile u8 *)ME2_PORT6_IO_ADDR)
+/* Port mode (for direct I/O, 0 = output, 1 = input).  */
+#define ME2_PORT6_PM_ADDR		0xFFFFF42C
+#define ME2_PORT6_PM			(*(volatile u8 *)ME2_PORT6_PM_ADDR)
+/* Port mode control (0 = direct I/O mode, 1 = alternative I/O mode).  */
+#define ME2_PORT6_PMC_ADDR		0xFFFFF44C
+#define ME2_PORT6_PMC			(*(volatile u8 *)ME2_PORT6_PMC_ADDR)
+/* Port function control ().  */
+#define ME2_PORT6_PFC_ADDR		0xFFFFF46C
+#define ME2_PORT6_PFC			(*(volatile u8 *)ME2_PORT6_PFC_ADDR)
+
+/* Port 7 */
+/* Direct I/O.  Bits 2-7 are pins P72-P77.  */
+#define ME2_PORT7_IO_ADDR		0xFFFFF40E
+#define ME2_PORT7_IO			(*(volatile u8 *)ME2_PORT7_IO_ADDR)
+/* Port mode (for direct I/O, 0 = output, 1 = input).  */
+#define ME2_PORT7_PM_ADDR		0xFFFFF42E
+#define ME2_PORT7_PM			(*(volatile u8 *)ME2_PORT7_PM_ADDR)
+/* Port mode control (0 = direct I/O mode, 1 = alternative I/O mode).  */
+#define ME2_PORT7_PMC_ADDR		0xFFFFF44E
+#define ME2_PORT7_PMC			(*(volatile u8 *)ME2_PORT7_PMC_ADDR)
+/* Port function control ().  */
+#define ME2_PORT7_PFC_ADDR		0xFFFFF46E
+#define ME2_PORT7_PFC			(*(volatile u8 *)ME2_PORT7_PFC_ADDR)
+
+
+#ifndef __ASSEMBLY__
+/* Initialize V850E/ME2 chip interrupts.  */
+extern void me2_init_irqs (void);
+#endif /* !__ASSEMBLY__ */
+
+
+#endif /* __V850_ME2_H__ */
diff --git a/include/asm-v850/mman.h b/include/asm-v850/mman.h
new file mode 100644
index 0000000..e2b9008
--- /dev/null
+++ b/include/asm-v850/mman.h
@@ -0,0 +1,40 @@
+#ifndef __V850_MMAN_H__
+#define __V850_MMAN_H__
+
+#define PROT_READ	0x1		/* page can be read */
+#define PROT_WRITE	0x2		/* page can be written */
+#define PROT_EXEC	0x4		/* page can be executed */
+#define PROT_NONE	0x0		/* page can not be accessed */
+#define PROT_GROWSDOWN	0x01000000	/* mprotect flag: extend change to start of growsdown vma */
+#define PROT_GROWSUP	0x02000000	/* mprotect flag: extend change to end of growsup vma */
+
+#define MAP_SHARED	0x01		/* Share changes */
+#define MAP_PRIVATE	0x02		/* Changes are private */
+#define MAP_TYPE	0x0f		/* Mask for type of mapping */
+#define MAP_FIXED	0x10		/* Interpret addr exactly */
+#define MAP_ANONYMOUS	0x20		/* don't use a file */
+
+#define MAP_GROWSDOWN	0x0100		/* stack-like segment */
+#define MAP_DENYWRITE	0x0800		/* ETXTBSY */
+#define MAP_EXECUTABLE	0x1000		/* mark it as an executable */
+#define MAP_LOCKED	0x2000		/* pages are locked */
+#define MAP_NORESERVE	0x4000		/* don't check for reservations */
+
+#define MS_ASYNC	1		/* sync memory asynchronously */
+#define MS_INVALIDATE	2		/* invalidate the caches */
+#define MS_SYNC		4		/* synchronous memory sync */
+
+#define MCL_CURRENT	1		/* lock all current mappings */
+#define MCL_FUTURE	2		/* lock all future mappings */
+
+#define MADV_NORMAL	0x0		/* default page-in behavior */
+#define MADV_RANDOM	0x1		/* page-in minimum required */
+#define MADV_SEQUENTIAL	0x2		/* read-ahead aggressively */
+#define MADV_WILLNEED	0x3		/* pre-fault pages */
+#define MADV_DONTNEED	0x4		/* discard these pages */
+
+/* compatibility flags */
+#define MAP_ANON	MAP_ANONYMOUS
+#define MAP_FILE	0
+
+#endif /* __V850_MMAN_H__ */
diff --git a/include/asm-v850/mmu.h b/include/asm-v850/mmu.h
new file mode 100644
index 0000000..e30a52b
--- /dev/null
+++ b/include/asm-v850/mmu.h
@@ -0,0 +1,22 @@
+/* Copyright (C) 2002, David McCullough <davidm@snapgear.com> */
+
+#ifndef __V850_MMU_H__
+#define __V850_MMU_H__
+
+struct mm_rblock_struct {
+	int		size;
+	int		refcount;
+	void	*kblock;
+};
+
+struct mm_tblock_struct {
+	struct mm_rblock_struct	*rblock;
+	struct mm_tblock_struct	*next;
+};
+
+typedef struct {
+	struct mm_tblock_struct	tblock;
+	unsigned long			end_brk;
+} mm_context_t;
+
+#endif /* __V850_MMU_H__ */
diff --git a/include/asm-v850/mmu_context.h b/include/asm-v850/mmu_context.h
new file mode 100644
index 0000000..f521c80
--- /dev/null
+++ b/include/asm-v850/mmu_context.h
@@ -0,0 +1,11 @@
+#ifndef __V850_MMU_CONTEXT_H__
+#define __V850_MMU_CONTEXT_H__
+
+#define destroy_context(mm)		((void)0)
+#define init_new_context(tsk,mm)	0
+#define switch_mm(prev,next,tsk)	((void)0)
+#define deactivate_mm(tsk,mm)		do { } while (0)
+#define activate_mm(prev,next)		((void)0)
+#define enter_lazy_tlb(mm,tsk)		((void)0)
+
+#endif /* __V850_MMU_CONTEXT_H__ */
diff --git a/include/asm-v850/module.h b/include/asm-v850/module.h
new file mode 100644
index 0000000..2c2f494
--- /dev/null
+++ b/include/asm-v850/module.h
@@ -0,0 +1,62 @@
+/*
+ * include/asm-v850/module.h -- Architecture-specific module hooks
+ *
+ *  Copyright (C) 2001,02,03,04  NEC Corporation
+ *  Copyright (C) 2001,02,03,04  Miles Bader <miles@gnu.org>
+ *  Copyright (C) 2001,03  Rusty Russell
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ *
+ * Derived in part from include/asm-ppc/module.h
+ */
+
+#ifndef __V850_MODULE_H__
+#define __V850_MODULE_H__
+
+#define MODULE_SYMBOL_PREFIX "_"
+
+struct v850_plt_entry
+{
+	/* Indirect jump instruction sequence (6-byte mov + 2-byte jr).  */
+	unsigned long tramp[2];
+};
+
+struct mod_arch_specific
+{
+	/* Indices of PLT sections within module. */
+	unsigned int core_plt_section, init_plt_section;
+};
+
+#define Elf_Shdr Elf32_Shdr
+#define Elf_Sym Elf32_Sym
+#define Elf_Ehdr Elf32_Ehdr
+
+/* Make empty sections for module_frob_arch_sections to expand. */
+#ifdef MODULE
+asm(".section .plt,\"ax\",@nobits; .align 3; .previous");
+asm(".section .init.plt,\"ax\",@nobits; .align 3; .previous");
+#endif
+
+/* We don't do exception tables.  */
+struct exception_table_entry;
+static inline const struct exception_table_entry *
+search_extable(const struct exception_table_entry *first,
+	       const struct exception_table_entry *last,
+	       unsigned long value)
+{
+	return 0;
+}
+#define ARCH_HAS_SEARCH_EXTABLE
+static inline void
+sort_extable(struct exception_table_entry *start,
+	     struct exception_table_entry *finish)
+{
+	/* nada */
+}
+#define ARCH_HAS_SORT_EXTABLE
+
+#endif /* __V850_MODULE_H__ */
diff --git a/include/asm-v850/msgbuf.h b/include/asm-v850/msgbuf.h
new file mode 100644
index 0000000..ed07dbd
--- /dev/null
+++ b/include/asm-v850/msgbuf.h
@@ -0,0 +1,31 @@
+#ifndef __V850_MSGBUF_H__
+#define __V850_MSGBUF_H__
+
+/* 
+ * The msqid64_ds structure for v850 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct msqid64_ds {
+	struct ipc64_perm msg_perm;
+	__kernel_time_t msg_stime;	/* last msgsnd time */
+	unsigned long	__unused1;
+	__kernel_time_t msg_rtime;	/* last msgrcv time */
+	unsigned long	__unused2;
+	__kernel_time_t msg_ctime;	/* last change time */
+	unsigned long	__unused3;
+	unsigned long  msg_cbytes;	/* current number of bytes on queue */
+	unsigned long  msg_qnum;	/* number of messages in queue */
+	unsigned long  msg_qbytes;	/* max number of bytes on queue */
+	__kernel_pid_t msg_lspid;	/* pid of last msgsnd */
+	__kernel_pid_t msg_lrpid;	/* last receive pid */
+	unsigned long  __unused4;
+	unsigned long  __unused5;
+};
+
+#endif /* __V850_MSGBUF_H__ */
diff --git a/include/asm-v850/namei.h b/include/asm-v850/namei.h
new file mode 100644
index 0000000..ee8339b
--- /dev/null
+++ b/include/asm-v850/namei.h
@@ -0,0 +1,17 @@
+/*
+ * linux/include/asm-v850/namei.h
+ *
+ * Included from linux/fs/namei.c
+ */
+
+#ifndef __V850_NAMEI_H__
+#define __V850_NAMEI_H__
+
+/* This dummy routine maybe changed to something useful
+ * for /usr/gnemul/ emulation stuff.
+ * Look at asm-sparc/namei.h for details.
+ */
+
+#define __emul_prefix() NULL
+
+#endif /* __V850_NAMEI_H__ */
diff --git a/include/asm-v850/page.h b/include/asm-v850/page.h
new file mode 100644
index 0000000..06085b0
--- /dev/null
+++ b/include/asm-v850/page.h
@@ -0,0 +1,146 @@
+/*
+ * include/asm-v850/page.h -- VM ops
+ *
+ *  Copyright (C) 2001,02,03  NEC Electronics Corporation
+ *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef __V850_PAGE_H__
+#define __V850_PAGE_H__
+
+#include <asm/machdep.h>
+
+
+#define PAGE_SHIFT	12
+#define PAGE_SIZE       (1UL << PAGE_SHIFT)
+#define PAGE_MASK       (~(PAGE_SIZE-1))
+
+
+/*
+ * PAGE_OFFSET -- the first address of the first page of memory. For archs with
+ * no MMU this corresponds to the first free page in physical memory (aligned
+ * on a page boundary).
+ */
+#ifndef PAGE_OFFSET
+#define PAGE_OFFSET  0x0000000
+#endif
+
+
+#ifdef __KERNEL__
+#ifndef __ASSEMBLY__
+
+#define STRICT_MM_TYPECHECKS
+
+#define clear_page(page)	memset ((void *)(page), 0, PAGE_SIZE)
+#define copy_page(to, from)	memcpy ((void *)(to), (void *)from, PAGE_SIZE)
+
+#define clear_user_page(addr, vaddr, page)	\
+	do { 	clear_page(addr);		\
+		flush_dcache_page(page);	\
+	} while (0)
+#define copy_user_page(to, from, vaddr, page)	\
+	do {	copy_page(to, from);		\
+		flush_dcache_page(page);	\
+	} while (0)
+
+#ifdef STRICT_MM_TYPECHECKS
+/*
+ * These are used to make use of C type-checking..
+ */
+
+typedef struct { unsigned long pte; } pte_t;
+typedef struct { unsigned long pmd; } pmd_t;
+typedef struct { unsigned long pgd; } pgd_t;
+typedef struct { unsigned long pgprot; } pgprot_t;
+
+#define pte_val(x)      ((x).pte)
+#define pmd_val(x)      ((x).pmd)
+#define pgd_val(x)      ((x).pgd)
+#define pgprot_val(x)   ((x).pgprot)
+
+#define __pte(x)        ((pte_t) { (x) } )
+#define __pmd(x)        ((pmd_t) { (x) } )
+#define __pgd(x)        ((pgd_t) { (x) } )
+#define __pgprot(x)     ((pgprot_t) { (x) } )
+
+#else /* !STRICT_MM_TYPECHECKS */
+/*
+ * .. while these make it easier on the compiler
+ */
+
+typedef unsigned long pte_t;
+typedef unsigned long pmd_t;
+typedef unsigned long pgd_t;
+typedef unsigned long pgprot_t;
+
+#define pte_val(x)      (x)
+#define pmd_val(x)      (x)
+#define pgd_val(x)      (x)
+#define pgprot_val(x)   (x)
+
+#define __pte(x)        (x)
+#define __pmd(x)        (x)
+#define __pgd(x)        (x)
+#define __pgprot(x)     (x)
+
+#endif /* STRICT_MM_TYPECHECKS */
+
+#endif /* !__ASSEMBLY__ */
+
+
+/* to align the pointer to the (next) page boundary */
+#define PAGE_ALIGN(addr)	(((addr) + PAGE_SIZE - 1) & PAGE_MASK)
+
+
+#ifndef __ASSEMBLY__
+
+/* Pure 2^n version of get_order */
+extern __inline__ int get_order (unsigned long size)
+{
+	int order;
+
+	size = (size-1) >> (PAGE_SHIFT-1);
+	order = -1;
+	do {
+		size >>= 1;
+		order++;
+	} while (size);
+	return order;
+}
+
+#endif /* !__ASSEMBLY__ */
+
+
+/* No current v850 processor has virtual memory.  */
+#define __virt_to_phys(addr)	(addr)
+#define __phys_to_virt(addr)	(addr)
+
+#define virt_to_pfn(kaddr)	(__virt_to_phys (kaddr) >> PAGE_SHIFT)
+#define pfn_to_virt(pfn)	__phys_to_virt ((pfn) << PAGE_SHIFT)
+
+#define MAP_NR(kaddr) \
+  (((unsigned long)(kaddr) - PAGE_OFFSET) >> PAGE_SHIFT)
+#define virt_to_page(kaddr)	(mem_map + MAP_NR (kaddr))
+#define page_to_virt(page) \
+  ((((page) - mem_map) << PAGE_SHIFT) + PAGE_OFFSET)
+
+#define pfn_to_page(pfn)	virt_to_page (pfn_to_virt (pfn))
+#define page_to_pfn(page)	virt_to_pfn (page_to_virt (page))
+
+#define	virt_addr_valid(kaddr)						\
+  (((void *)(kaddr) >= (void *)PAGE_OFFSET) && MAP_NR (kaddr) < max_mapnr)
+
+
+#define __pa(x)		     __virt_to_phys ((unsigned long)(x))
+#define __va(x)		     ((void *)__phys_to_virt ((unsigned long)(x)))
+
+
+#endif /* KERNEL */
+
+#endif /* __V850_PAGE_H__ */
diff --git a/include/asm-v850/param.h b/include/asm-v850/param.h
new file mode 100644
index 0000000..8d796e4
--- /dev/null
+++ b/include/asm-v850/param.h
@@ -0,0 +1,32 @@
+/*
+ * include/asm-v850/param.h -- Varions kernel parameters
+ *
+ *  Copyright (C) 2001,02  NEC Corporation
+ *  Copyright (C) 2001,02  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef __V850_PARAM_H__
+#define __V850_PARAM_H__
+
+#include <asm/machdep.h>	/* For HZ */
+
+#define EXEC_PAGESIZE	4096
+
+#ifndef NOGROUP
+#define NOGROUP		(-1)
+#endif
+
+#define MAXHOSTNAMELEN	64	/* max length of hostname */
+
+#ifdef __KERNEL__
+# define USER_HZ	100
+# define CLOCKS_PER_SEC	USER_HZ
+#endif
+
+#endif /* __V850_PARAM_H__ */
diff --git a/include/asm-v850/pci.h b/include/asm-v850/pci.h
new file mode 100644
index 0000000..e419414
--- /dev/null
+++ b/include/asm-v850/pci.h
@@ -0,0 +1,88 @@
+/*
+ * include/asm-v850/pci.h -- PCI support
+ *
+ *  Copyright (C) 2001,02  NEC Corporation
+ *  Copyright (C) 2001,02  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef __V850_PCI_H__
+#define __V850_PCI_H__
+
+/* Get any platform-dependent definitions.  */
+#include <asm/machdep.h>
+
+#define pcibios_scan_all_fns(a, b)	0
+
+/* Generic declarations.  */
+
+struct scatterlist;
+
+extern void pcibios_set_master (struct pci_dev *dev);
+
+/* `Grant' to PDEV the memory block at CPU_ADDR, for doing DMA.  The
+   32-bit PCI bus mastering address to use is returned.  the device owns
+   this memory until either pci_unmap_single or pci_dma_sync_single_for_cpu is
+   performed.  */
+extern dma_addr_t
+pci_map_single (struct pci_dev *pdev, void *cpu_addr, size_t size, int dir);
+
+/* Return to the CPU the PCI DMA memory block previously `granted' to
+   PDEV, at DMA_ADDR.  */
+extern void
+pci_unmap_single (struct pci_dev *pdev, dma_addr_t dma_addr, size_t size,
+		  int dir);
+
+/* Make physical memory consistent for a single streaming mode DMA
+   translation after a transfer.
+
+   If you perform a pci_map_single() but wish to interrogate the
+   buffer using the cpu, yet do not wish to teardown the PCI dma
+   mapping, you must call this function before doing so.  At the next
+   point you give the PCI dma address back to the card, you must first
+   perform a pci_dma_sync_for_device, and then the device again owns
+   the buffer.  */
+extern void
+pci_dma_sync_single_for_cpu (struct pci_dev *dev, dma_addr_t dma_addr, size_t size,
+		     int dir);
+
+extern void
+pci_dma_sync_single_for_device (struct pci_dev *dev, dma_addr_t dma_addr, size_t size,
+		     int dir);
+
+
+/* Do multiple DMA mappings at once.  */
+extern int
+pci_map_sg (struct pci_dev *pdev, struct scatterlist *sg, int sg_len, int dir);
+
+/* Unmap multiple DMA mappings at once.  */
+extern void
+pci_unmap_sg (struct pci_dev *pdev, struct scatterlist *sg, int sg_len,
+	      int dir);
+
+/* Allocate and map kernel buffer using consistent mode DMA for PCI
+   device.  Returns non-NULL cpu-view pointer to the buffer if
+   successful and sets *DMA_ADDR to the pci side dma address as well,
+   else DMA_ADDR is undefined.  */
+extern void *
+pci_alloc_consistent (struct pci_dev *pdev, size_t size, dma_addr_t *dma_addr);
+
+/* Free and unmap a consistent DMA buffer.  CPU_ADDR and DMA_ADDR must
+   be values that were returned from pci_alloc_consistent.  SIZE must be
+   the same as what as passed into pci_alloc_consistent.  References to
+   the memory and mappings assosciated with CPU_ADDR or DMA_ADDR past
+   this call are illegal.  */
+extern void
+pci_free_consistent (struct pci_dev *pdev, size_t size, void *cpu_addr,
+		     dma_addr_t dma_addr);
+
+static inline void pcibios_add_platform_entries(struct pci_dev *dev)
+{
+}
+
+#endif /* __V850_PCI_H__ */
diff --git a/include/asm-v850/percpu.h b/include/asm-v850/percpu.h
new file mode 100644
index 0000000..755ac65
--- /dev/null
+++ b/include/asm-v850/percpu.h
@@ -0,0 +1,14 @@
+#ifndef __V850_PERCPU_H__
+#define __V850_PERCPU_H__
+
+#include <asm-generic/percpu.h>
+
+/* This is a stupid hack to satisfy some grotty implicit include-file
+   dependency; basically, <linux/smp.h> uses BUG_ON, which calls BUG, but
+   doesn't include the necessary headers to define it.  In the twisted
+   festering mess of includes this must all be resolved somehow on other
+   platforms, but I haven't the faintest idea how, and don't care; here will
+   do, even though doesn't actually make any sense.  */
+#include <asm/page.h>
+
+#endif /* __V850_PERCPU_H__ */
diff --git a/include/asm-v850/pgalloc.h b/include/asm-v850/pgalloc.h
new file mode 100644
index 0000000..b91eb2d
--- /dev/null
+++ b/include/asm-v850/pgalloc.h
@@ -0,0 +1,22 @@
+/*
+ * include/asm-v850/pgalloc.h
+ *
+ *  Copyright (C) 2001,02  NEC Corporation
+ *  Copyright (C) 2001,02  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef __V850_PGALLOC_H__
+#define __V850_PGALLOC_H__
+
+#include <linux/mm.h>  /* some crap code expects this */
+
+/* ... and then, there was one.  */
+#define check_pgt_cache()	((void)0)
+
+#endif /* __V850_PGALLOC_H__ */
diff --git a/include/asm-v850/pgtable.h b/include/asm-v850/pgtable.h
new file mode 100644
index 0000000..76e380e
--- /dev/null
+++ b/include/asm-v850/pgtable.h
@@ -0,0 +1,58 @@
+#ifndef __V850_PGTABLE_H__
+#define __V850_PGTABLE_H__
+
+#include <asm-generic/4level-fixup.h>
+
+#include <linux/config.h>
+#include <asm/page.h>
+
+
+#define pgd_present(pgd)	(1) /* pages are always present on NO_MM */
+#define pgd_none(pgd)		(0)
+#define pgd_bad(pgd)		(0)
+#define pgd_clear(pgdp)		((void)0)
+
+#define	pmd_offset(a, b)	((void *)0)
+
+#define kern_addr_valid(addr)	(1)
+
+
+#define __swp_type(x)		(0)
+#define __swp_offset(x)		(0)
+#define __swp_entry(typ,off)	((swp_entry_t) { ((typ) | ((off) << 7)) })
+#define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val(pte) })
+#define __swp_entry_to_pte(x)	((pte_t) { (x).val })
+
+
+/* These mean nothing to !CONFIG_MMU.  */
+#define PAGE_NONE		__pgprot(0)
+#define PAGE_SHARED		__pgprot(0)
+#define PAGE_COPY		__pgprot(0)
+#define PAGE_READONLY		__pgprot(0)
+#define PAGE_KERNEL		__pgprot(0)
+
+
+/*
+ * ZERO_PAGE is a global shared page that is always zero: used
+ * for zero-mapped memory areas etc.  When CONFIG_MMU is not defined, this
+ * should never actually be used, so just define it to something that's
+ * will hopefully cause a bus error if it is.
+ */
+#define ZERO_PAGE(vaddr)	((void *)0x87654321)
+
+
+/* Some bogus code in procfs uses these; whatever.  */
+#define VMALLOC_START	0
+#define VMALLOC_END	(~0)
+
+
+extern void paging_init (void);
+#define swapper_pg_dir ((pgd_t *) 0)
+
+#define pgtable_cache_init()   ((void)0)
+
+
+extern unsigned int kobjsize(const void *objp);
+
+
+#endif /* __V850_PGTABLE_H__ */
diff --git a/include/asm-v850/poll.h b/include/asm-v850/poll.h
new file mode 100644
index 0000000..0369562
--- /dev/null
+++ b/include/asm-v850/poll.h
@@ -0,0 +1,23 @@
+#ifndef __V850_POLL_H__
+#define __V850_POLL_H__
+
+#define POLLIN		0x0001
+#define POLLPRI		0x0002
+#define POLLOUT		0x0004
+#define POLLERR		0x0008
+#define POLLHUP		0x0010
+#define POLLNVAL	0x0020
+#define POLLRDNORM	0x0040
+#define POLLWRNORM	POLLOUT
+#define POLLRDBAND	0x0080
+#define POLLWRBAND	0x0100
+#define POLLMSG		0x0400
+#define POLLREMOVE	0x1000
+
+struct pollfd {
+	int fd;
+	short events;
+	short revents;
+};
+
+#endif /* __V850_POLL_H__ */
diff --git a/include/asm-v850/posix_types.h b/include/asm-v850/posix_types.h
new file mode 100644
index 0000000..ccb7297
--- /dev/null
+++ b/include/asm-v850/posix_types.h
@@ -0,0 +1,76 @@
+/*
+ * include/asm-v850/posix_types.h -- Kernel versions of standard types
+ *
+ *  Copyright (C) 2001,02,03  NEC Electronics Corporation
+ *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef __V850_POSIX_TYPES_H__
+#define __V850_POSIX_TYPES_H__
+
+typedef unsigned long	__kernel_ino_t;
+typedef unsigned long long __kernel_ino64_t;
+typedef unsigned int	__kernel_mode_t;
+typedef unsigned int	__kernel_nlink_t;
+typedef long		__kernel_off_t;
+typedef long long	__kernel_loff_t;
+typedef int		__kernel_pid_t;
+typedef unsigned short	__kernel_ipc_pid_t;
+typedef unsigned int	__kernel_uid_t;
+typedef unsigned int	__kernel_gid_t;
+typedef unsigned int	__kernel_size_t;
+typedef int		__kernel_ssize_t;
+typedef int		__kernel_ptrdiff_t;
+typedef long		__kernel_time_t;
+typedef long		__kernel_suseconds_t;
+typedef long		__kernel_clock_t;
+typedef int		__kernel_timer_t;
+typedef int		__kernel_clockid_t;
+typedef int		__kernel_daddr_t;
+typedef char *		__kernel_caddr_t;
+typedef unsigned short	__kernel_uid16_t;
+typedef unsigned short	__kernel_gid16_t;
+typedef unsigned int	__kernel_uid32_t;
+typedef unsigned int	__kernel_gid32_t;
+
+/* Some bogus code depends on this; we don't care.  */
+typedef __kernel_uid_t __kernel_old_uid_t;
+typedef unsigned int	__kernel_old_dev_t;
+
+typedef struct {
+#if defined(__KERNEL__) || defined(__USE_ALL)
+	int	val[2];
+#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */
+	int	__val[2];
+#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */
+} __kernel_fsid_t;
+
+
+#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2)
+
+/* We used to include <asm/bitops.h> here, which seems the right thing, but
+   it caused nasty include-file definition order problems.  Removing the
+   include seems to work, so fingers crossed...  */
+
+#undef	__FD_SET
+#define __FD_SET(fd, fd_set) \
+  __set_bit (fd, (void *)&((__kernel_fd_set *)fd_set)->fds_bits)
+#undef __FD_CLR
+#define __FD_CLR(fd, fd_set) \
+  __clear_bit (fd, (void *)&((__kernel_fd_set *)fd_set)->fds_bits)
+#undef	__FD_ISSET
+#define __FD_ISSET(fd, fd_set) \
+  __test_bit (fd, (void *)&((__kernel_fd_set *)fd_set)->fds_bits)
+#undef	__FD_ZERO
+#define __FD_ZERO(fd_set) \
+  memset (fd_set, 0, sizeof (*(fd_set *)fd_set))
+
+#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */
+
+#endif /* __V850_POSIX_TYPES_H__ */
diff --git a/include/asm-v850/processor.h b/include/asm-v850/processor.h
new file mode 100644
index 0000000..d41f925
--- /dev/null
+++ b/include/asm-v850/processor.h
@@ -0,0 +1,120 @@
+/*
+ * include/asm-v850/processor.h
+ *
+ *  Copyright (C) 2001,02,03  NEC Electronics Corporation
+ *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef __V850_PROCESSOR_H__
+#define __V850_PROCESSOR_H__
+
+#include <linux/config.h>
+#ifndef __ASSEMBLY__ /* <linux/thread_info.h> is not asm-safe.  */
+#include <linux/thread_info.h>
+#endif
+
+#include <asm/ptrace.h>
+#include <asm/entry.h>
+
+/* Some code expects `segment' stuff to be defined here.  */
+#include <asm/segment.h>
+
+
+/*
+ * The only places this is used seem to be horrible bletcherous kludges,
+ * so we just define it to be as large as possible.
+ */
+#define TASK_SIZE	(0xFFFFFFFF)
+
+/*
+ * This decides where the kernel will search for a free chunk of vm
+ * space during mmap's.  We won't be using it.
+ */
+#define TASK_UNMAPPED_BASE	0
+
+
+#ifndef __ASSEMBLY__
+
+
+/*
+ * Default implementation of macro that returns current
+ * instruction pointer ("program counter").
+ */
+#define current_text_addr()	({ __label__ _l; _l: &&_l;})
+
+/* If you change this, you must change the associated assembly-languages
+   constants defined below, THREAD_*.  */
+struct thread_struct {
+	/* kernel stack pointer (must be first field in structure) */
+	unsigned long  ksp;
+};
+
+#define INIT_THREAD { sizeof init_stack + (unsigned long)init_stack }
+
+
+/* Do necessary setup to start up a newly executed thread.  */
+extern inline void start_thread (struct pt_regs *regs,
+				 unsigned long pc, unsigned long usp)
+{
+	regs->pc = pc;
+	regs->gpr[GPR_SP] = usp;
+	regs->kernel_mode = 0;
+}
+
+/* Free all resources held by a thread. */
+extern inline void release_thread (struct task_struct *dead_task)
+{
+}
+
+/* Prepare to copy thread state - unlazy all lazy status */
+#define prepare_to_copy(tsk)	do { } while (0)
+
+extern int kernel_thread (int (*fn)(void *), void * arg, unsigned long flags);
+
+/* Free current thread data structures etc.  */
+static inline void exit_thread (void)
+{
+}
+
+
+/* Return the registers saved during context-switch by the currently
+   not-running thread T.  Note that this only includes some registers!
+   See entry.S for details.  */
+#define thread_saved_regs(t) \
+   ((struct pt_regs*)((t)->thread.ksp + STATE_SAVE_PT_OFFSET))
+/* Return saved (kernel) PC of a blocked thread.  Actually, we return the
+   LP register, because the thread is actually blocked in switch_thread,
+   and we're interested in the PC it will _return_ to.  */
+#define thread_saved_pc(t)   (thread_saved_regs(t)->gpr[GPR_LP])
+
+
+unsigned long get_wchan (struct task_struct *p);
+
+
+/* Return some info about the user process TASK.  */
+#define task_tos(task)	((unsigned long)(task)->thread_info + THREAD_SIZE)
+#define task_regs(task) ((struct pt_regs *)task_tos (task) - 1)
+#define task_sp(task)	(task_regs (task)->gpr[GPR_SP])
+#define task_pc(task)	(task_regs (task)->pc)
+/* Grotty old names for some.  */
+#define KSTK_EIP(task)	task_pc (task)
+#define KSTK_ESP(task)	task_sp (task)
+
+
+#define cpu_relax()    ((void)0)
+
+
+#else /* __ASSEMBLY__ */
+
+#define THREAD_KSP	0
+
+#endif /* !__ASSEMBLY__ */
+
+
+#endif /* __V850_PROCESSOR_H__ */
diff --git a/include/asm-v850/ptrace.h b/include/asm-v850/ptrace.h
new file mode 100644
index 0000000..7bf72bb
--- /dev/null
+++ b/include/asm-v850/ptrace.h
@@ -0,0 +1,121 @@
+/*
+ * include/asm-v850/ptrace.h -- Access to CPU registers
+ *
+ *  Copyright (C) 2001,02,03  NEC Electronics Corporation
+ *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef __V850_PTRACE_H__
+#define __V850_PTRACE_H__
+
+
+/* v850 general purpose registers with special meanings.  */
+#define GPR_ZERO	0	/* constant zero */
+#define GPR_ASM		1	/* reserved for assembler */
+#define GPR_SP		3	/* stack pointer */
+#define GPR_GP		4	/* global data pointer */
+#define GPR_TP		5	/* `text pointer' */
+#define GPR_EP		30	/* `element pointer' */
+#define GPR_LP		31	/* link pointer (current return address) */
+
+/* These aren't official names, but they make some code more descriptive.  */
+#define GPR_ARG0	6
+#define GPR_ARG1	7
+#define GPR_ARG2	8
+#define GPR_ARG3	9
+#define GPR_RVAL0	10
+#define GPR_RVAL1	11
+#define GPR_RVAL	GPR_RVAL0
+
+#define NUM_GPRS	32
+
+/* v850 `system' registers.  */
+#define SR_EIPC		0
+#define SR_EIPSW	1
+#define SR_FEPC		2
+#define SR_FEPSW	3
+#define SR_ECR		4
+#define SR_PSW		5
+#define SR_CTPC		16
+#define SR_CTPSW	17
+#define SR_DBPC		18
+#define SR_DBPSW	19
+#define SR_CTBP		20
+#define SR_DIR		21
+#define SR_ASID		23
+
+
+#ifndef __ASSEMBLY__
+
+typedef unsigned long v850_reg_t;
+
+/* How processor state is stored on the stack during a syscall/signal.
+   If you change this structure, change the associated assembly-language
+   macros below too (PT_*)!  */
+struct pt_regs
+{
+	/* General purpose registers.  */
+	v850_reg_t gpr[NUM_GPRS];
+
+	v850_reg_t pc;		/* program counter */
+	v850_reg_t psw;		/* program status word */
+
+	/* Registers used by `callt' instruction:  */
+	v850_reg_t ctpc;	/* saved program counter */
+	v850_reg_t ctpsw;	/* saved psw */
+	v850_reg_t ctbp;	/* base pointer for callt table */
+
+	char kernel_mode;	/* 1 if in `kernel mode', 0 if user mode */
+};
+
+
+#define instruction_pointer(regs)	((regs)->pc)
+#define profile_pc(regs) instruction_pointer(regs)
+#define user_mode(regs)			(!(regs)->kernel_mode)
+
+/* When a struct pt_regs is used to save user state for a system call in
+   the kernel, the system call is stored in the space for R0 (since it's
+   never used otherwise, R0 being a constant 0).  Non-system-calls
+   simply store 0 there.  */
+#define PT_REGS_SYSCALL(regs)		(regs)->gpr[0]
+#define PT_REGS_SET_SYSCALL(regs, val)	((regs)->gpr[0] = (val))
+
+#endif /* !__ASSEMBLY__ */
+
+
+/* The number of bytes used to store each register.  */
+#define _PT_REG_SIZE	4
+
+/* Offset of a general purpose register in a stuct pt_regs.  */
+#define PT_GPR(num)	((num) * _PT_REG_SIZE)
+
+/* Offsets of various special registers & fields in a struct pt_regs.  */
+#define PT_PC		((NUM_GPRS + 0) * _PT_REG_SIZE)
+#define PT_PSW		((NUM_GPRS + 1) * _PT_REG_SIZE)
+#define PT_CTPC		((NUM_GPRS + 2) * _PT_REG_SIZE)
+#define PT_CTPSW	((NUM_GPRS + 3) * _PT_REG_SIZE)
+#define PT_CTBP		((NUM_GPRS + 4) * _PT_REG_SIZE)
+#define PT_KERNEL_MODE	((NUM_GPRS + 5) * _PT_REG_SIZE)
+
+/* Where the current syscall number is stashed; obviously only valid in
+   the kernel!  */
+#define PT_CUR_SYSCALL	PT_GPR(0)
+
+/* Size of struct pt_regs, including alignment.  */
+#define PT_SIZE		((NUM_GPRS + 6) * _PT_REG_SIZE)
+
+
+/* These are `magic' values for PTRACE_PEEKUSR that return info about where
+   a process is located in memory.  */
+#define PT_TEXT_ADDR	(PT_SIZE + 1)
+#define PT_TEXT_LEN	(PT_SIZE + 2)
+#define PT_DATA_ADDR	(PT_SIZE + 3)
+
+
+#endif /* __V850_PTRACE_H__ */
diff --git a/include/asm-v850/resource.h b/include/asm-v850/resource.h
new file mode 100644
index 0000000..4b9dcd4
--- /dev/null
+++ b/include/asm-v850/resource.h
@@ -0,0 +1,6 @@
+#ifndef __V850_RESOURCE_H__
+#define __V850_RESOURCE_H__
+
+#include <asm-generic/resource.h>
+
+#endif /* __V850_RESOURCE_H__ */
diff --git a/include/asm-v850/rte_cb.h b/include/asm-v850/rte_cb.h
new file mode 100644
index 0000000..9f7f02c
--- /dev/null
+++ b/include/asm-v850/rte_cb.h
@@ -0,0 +1,85 @@
+/*
+ * include/asm-v850/rte_cb.h -- Midas labs RTE-CB series of evaluation boards
+ *
+ *  Copyright (C) 2001,02,03  NEC Electronics Corporation
+ *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef __V850_RTE_CB_H__
+#define __V850_RTE_CB_H__
+
+
+/* The SRAM on the Mother-A motherboard.  */
+#define MB_A_SRAM_ADDR		GCS0_ADDR
+#define MB_A_SRAM_SIZE		0x00200000 /* 2MB */
+
+
+#ifdef CONFIG_RTE_GBUS_INT
+/* GBUS interrupt support.  */
+
+# include <asm/gbus_int.h>
+
+# define GBUS_INT_BASE_IRQ	NUM_RTE_CB_IRQS
+# define GBUS_INT_BASE_ADDR	(GCS2_ADDR + 0x00006000)
+
+/* Some specific interrupts.  */
+# define IRQ_MB_A_LAN		IRQ_GBUS_INT(10)
+# define IRQ_MB_A_PCI1(n)	(IRQ_GBUS_INT(16) + (n))
+# define IRQ_MB_A_PCI1_NUM	4
+# define IRQ_MB_A_PCI2(n)	(IRQ_GBUS_INT(20) + (n))
+# define IRQ_MB_A_PCI2_NUM	4
+# define IRQ_MB_A_EXT(n)	(IRQ_GBUS_INT(24) + (n))
+# define IRQ_MB_A_EXT_NUM	4
+# define IRQ_MB_A_USB_OC(n)	(IRQ_GBUS_INT(28) + (n))
+# define IRQ_MB_A_USB_OC_NUM	2
+# define IRQ_MB_A_PCMCIA_OC	IRQ_GBUS_INT(30)
+
+/* We define NUM_MACH_IRQS to include extra interrupts from the GBUS.  */
+# define NUM_MACH_IRQS		(NUM_RTE_CB_IRQS + IRQ_GBUS_INT_NUM)
+
+#else /* !CONFIG_RTE_GBUS_INT */
+
+# define NUM_MACH_IRQS		NUM_RTE_CB_IRQS
+
+#endif /* CONFIG_RTE_GBUS_INT */
+
+
+#ifdef CONFIG_RTE_MB_A_PCI
+/* Mother-A PCI bus support.  */
+
+# include <asm/rte_mb_a_pci.h>
+
+/* These are the base addresses used for allocating device address
+   space.  512K of the motherboard SRAM is in the same space, so we have
+   to be careful not to let it be allocated.  */
+# define PCIBIOS_MIN_MEM	(MB_A_PCI_MEM_ADDR + 0x80000)
+# define PCIBIOS_MIN_IO		MB_A_PCI_IO_ADDR
+
+/* As we don't really support PCI DMA to cpu memory, and use bounce-buffers
+   instead, perversely enough, this becomes always true! */
+# define pci_dma_supported(dev, mask)		1
+# define pci_dac_dma_supported(dev, mask)	0
+# define pcibios_assign_all_busses()		1
+
+#endif /* CONFIG_RTE_MB_A_PCI */
+
+
+/* For <asm/param.h> */
+#ifndef HZ
+#define HZ	100
+#endif
+
+
+#ifndef __ASSEMBLY__
+extern void rte_cb_early_init (void);
+extern void rte_cb_init_irqs (void);
+#endif /* !__ASSEMBLY__ */
+
+
+#endif /* __V850_RTE_CB_H__ */
diff --git a/include/asm-v850/rte_ma1_cb.h b/include/asm-v850/rte_ma1_cb.h
new file mode 100644
index 0000000..bd3162a
--- /dev/null
+++ b/include/asm-v850/rte_ma1_cb.h
@@ -0,0 +1,128 @@
+/*
+ * include/asm-v850/rte_ma1_cb.h -- Midas labs RTE-V850/MA1-CB board
+ *
+ *  Copyright (C) 2001,02,03  NEC Electronics Corporation
+ *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef __V850_RTE_MA1_CB_H__
+#define __V850_RTE_MA1_CB_H__
+
+#include <asm/rte_cb.h>		/* Common defs for Midas RTE-CB boards.  */
+
+
+#define PLATFORM		"rte-v850e/ma1-cb"
+#define PLATFORM_LONG		"Midas lab RTE-V850E/MA1-CB"
+
+#define CPU_CLOCK_FREQ		50000000 /* 50MHz */
+
+/* 1MB of onboard SRAM.  Note that the monitor ROM uses parts of this
+   for its own purposes, so care must be taken.  Some address lines are
+   not decoded, so the SRAM area is mirrored every 1MB from 0x400000 to
+   0x800000 (exclusive).  */
+#define SRAM_ADDR		0x00400000
+#define SRAM_SIZE		0x00100000 /* 1MB */
+
+/* 32MB of onbard SDRAM.  */
+#define SDRAM_ADDR		0x00800000
+#define SDRAM_SIZE		0x02000000 /* 32MB */
+
+
+/* CPU addresses of GBUS memory spaces.  */
+#define GCS0_ADDR		0x05000000 /* GCS0 - Common SRAM (2MB) */
+#define GCS0_SIZE		0x00200000 /*   2MB */
+#define GCS1_ADDR		0x06000000 /* GCS1 - Flash ROM (8MB) */
+#define GCS1_SIZE		0x00800000 /*   8MB */
+#define GCS2_ADDR		0x07900000 /* GCS2 - I/O registers */
+#define GCS2_SIZE		0x00400000 /*   4MB */
+#define GCS5_ADDR		0x04000000 /* GCS5 - PCI bus space */
+#define GCS5_SIZE		0x01000000 /*   16MB */
+#define GCS6_ADDR		0x07980000 /* GCS6 - PCI control registers */
+#define GCS6_SIZE		0x00000200 /*   512B */
+
+
+/* For <asm/page.h> */
+#define PAGE_OFFSET 		SRAM_ADDR
+
+
+/* The GBUS GINT0 - GINT3 interrupts are connected to the INTP000 - INTP011
+   pins on the CPU.  These are shared among the GBUS interrupts.  */
+#define IRQ_GINT(n)		IRQ_INTP(n)
+#define IRQ_GINT_NUM		4
+
+/* Used by <asm/rte_cb.h> to derive NUM_MACH_IRQS.  */
+#define NUM_RTE_CB_IRQS		NUM_CPU_IRQS
+
+
+#ifdef CONFIG_ROM_KERNEL
+/* Kernel is in ROM, starting at address 0.  */
+
+#define INTV_BASE		0
+
+#else /* !CONFIG_ROM_KERNEL */
+
+#ifdef CONFIG_RTE_CB_MULTI
+/* Using RAM kernel with ROM monitor for Multi debugger.  */
+
+/* The chip's real interrupt vectors are in ROM, but they jump to a
+   secondary interrupt vector table in RAM.  */
+#define INTV_BASE		0x004F8000
+
+/* Scratch memory used by the ROM monitor, which shouldn't be used by
+   linux (except for the alternate interrupt vector area, defined
+   above).  */
+#define MON_SCRATCH_ADDR	0x004F8000
+#define MON_SCRATCH_SIZE	0x00008000 /* 32KB */
+
+#else /* !CONFIG_RTE_CB_MULTI */
+/* Using RAM-kernel.  Assume some sort of boot-loader got us loaded at
+   address 0.  */
+
+#define INTV_BASE		0
+
+#endif /* CONFIG_RTE_CB_MULTI */
+
+#endif /* CONFIG_ROM_KERNEL */
+
+
+/* Some misc. on-board devices.  */
+
+/* Seven-segment LED display (two digits).  Write-only.  */
+#define LED_ADDR(n)		(0x07802000 + (n))
+#define LED(n)			(*(volatile unsigned char *)LED_ADDR(n))
+#define LED_NUM_DIGITS		2
+
+
+/* Override the basic MA uart pre-initialization so that we can
+   initialize extra stuff.  */
+#undef V850E_UART_PRE_CONFIGURE	/* should be defined by <asm/ma.h> */
+#define V850E_UART_PRE_CONFIGURE	rte_ma1_cb_uart_pre_configure
+#ifndef __ASSEMBLY__
+extern void rte_ma1_cb_uart_pre_configure (unsigned chan,
+					   unsigned cflags, unsigned baud);
+#endif
+
+/* This board supports RTS/CTS for the on-chip UART, but only for channel 0. */
+
+/* CTS for UART channel 0 is pin P43 (bit 3 of port 4).  */
+#define V850E_UART_CTS(chan)	((chan) == 0 ? !(MA_PORT4_IO & 0x8) : 1)
+/* RTS for UART channel 0 is pin P42 (bit 2 of port 4).  */
+#define V850E_UART_SET_RTS(chan, val)					      \
+   do {									      \
+	   if (chan == 0) {						      \
+		   unsigned old = MA_PORT4_IO; 				      \
+		   if (val)						      \
+			   MA_PORT4_IO = old & ~0x4;			      \
+		   else							      \
+			   MA_PORT4_IO = old | 0x4;			      \
+	   }								      \
+   } while (0)
+
+
+#endif /* __V850_RTE_MA1_CB_H__ */
diff --git a/include/asm-v850/rte_mb_a_pci.h b/include/asm-v850/rte_mb_a_pci.h
new file mode 100644
index 0000000..41ac185
--- /dev/null
+++ b/include/asm-v850/rte_mb_a_pci.h
@@ -0,0 +1,56 @@
+/*
+ * include/asm-v850/mb_a_pci.h -- PCI support for Midas lab RTE-MOTHER-A board
+ *
+ *  Copyright (C) 2001  NEC Corporation
+ *  Copyright (C) 2001  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef __V850_MB_A_PCI_H__
+#define __V850_MB_A_PCI_H__
+
+
+#define MB_A_PCI_MEM_ADDR	GCS5_ADDR
+#define MB_A_PCI_MEM_SIZE	(GCS5_SIZE / 2)
+#define MB_A_PCI_IO_ADDR	(GCS5_ADDR + MB_A_PCI_MEM_SIZE)
+#define MB_A_PCI_IO_SIZE	(GCS5_SIZE / 2)
+#define MB_A_PCI_REG_BASE_ADDR	GCS6_ADDR
+
+#define MB_A_PCI_PCICR_ADDR	(MB_A_PCI_REG_BASE_ADDR + 0x4)
+#define MB_A_PCI_PCICR		(*(volatile u16 *)MB_A_PCI_PCICR_ADDR)
+#define MB_A_PCI_PCISR_ADDR	(MB_A_PCI_REG_BASE_ADDR + 0x6)
+#define MB_A_PCI_PCISR		(*(volatile u16 *)MB_A_PCI_PCISR_ADDR)
+#define MB_A_PCI_PCILTR_ADDR	(MB_A_PCI_REG_BASE_ADDR + 0xD)
+#define MB_A_PCI_PCILTR		(*(volatile u8 *)MB_A_PCI_PCILTR_ADDR)
+#define MB_A_PCI_PCIBAR0_ADDR	(MB_A_PCI_REG_BASE_ADDR + 0x10)
+#define MB_A_PCI_PCIBAR0	(*(volatile u32 *)MB_A_PCI_PCIBAR0_ADDR)
+#define MB_A_PCI_PCIBAR1_ADDR	(MB_A_PCI_REG_BASE_ADDR + 0x14)
+#define MB_A_PCI_PCIBAR1	(*(volatile u32 *)MB_A_PCI_PCIBAR1_ADDR)
+#define MB_A_PCI_PCIBAR2_ADDR	(MB_A_PCI_REG_BASE_ADDR + 0x18)
+#define MB_A_PCI_PCIBAR2	(*(volatile u32 *)MB_A_PCI_PCIBAR2_ADDR)
+#define MB_A_PCI_VENDOR_ID_ADDR	(MB_A_PCI_REG_BASE_ADDR + 0x2C)
+#define MB_A_PCI_VENDOR_ID	(*(volatile u16 *)MB_A_PCI_VENDOR_ID_ADDR)
+#define MB_A_PCI_DEVICE_ID_ADDR	(MB_A_PCI_REG_BASE_ADDR + 0x2E)
+#define MB_A_PCI_DEVICE_ID	(*(volatile u16 *)MB_A_PCI_DEVICE_ID_ADDR)
+#define MB_A_PCI_DMRR_ADDR	(MB_A_PCI_REG_BASE_ADDR + 0x9C)
+#define MB_A_PCI_DMRR		(*(volatile u32 *)MB_A_PCI_DMRR_ADDR)
+#define MB_A_PCI_DMLBAM_ADDR	(MB_A_PCI_REG_BASE_ADDR + 0xA0)
+#define MB_A_PCI_DMLBAM		(*(volatile u32 *)MB_A_PCI_DMLBAM_ADDR)
+#define MB_A_PCI_DMLBAI_ADDR	(MB_A_PCI_REG_BASE_ADDR + 0xA4)
+#define MB_A_PCI_DMLBAI		(*(volatile u32 *)MB_A_PCI_DMLBAI_ADDR)
+#define MB_A_PCI_PCIPBAM_ADDR	(MB_A_PCI_REG_BASE_ADDR + 0xA8)
+#define MB_A_PCI_PCIPBAM	(*(volatile u32 *)MB_A_PCI_PCIPBAM_ADDR)
+/* `PCI Configuration Address Register for Direct Master to PCI IO/CFG'  */
+#define MB_A_PCI_DMCFGA_ADDR	(MB_A_PCI_REG_BASE_ADDR + 0xAC)
+#define MB_A_PCI_DMCFGA		(*(volatile u32 *)MB_A_PCI_DMCFGA_ADDR)
+/* `PCI Permanent Configuration ID Register'  */
+#define MB_A_PCI_PCIHIDR_ADDR	(MB_A_PCI_REG_BASE_ADDR + 0xF0)
+#define MB_A_PCI_PCIHIDR	(*(volatile u32 *)MB_A_PCI_PCIHIDR_ADDR)
+
+
+#endif /* __V850_MB_A_PCI_H__ */
diff --git a/include/asm-v850/rte_me2_cb.h b/include/asm-v850/rte_me2_cb.h
new file mode 100644
index 0000000..9922c85
--- /dev/null
+++ b/include/asm-v850/rte_me2_cb.h
@@ -0,0 +1,202 @@
+/*
+ * include/asm-v850/rte_me2_cb.h -- Midas labs RTE-V850E/ME2-CB board
+ *
+ *  Copyright (C) 2001,02,03  NEC Corporation
+ *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef __V850_RTE_ME2_CB_H__
+#define __V850_RTE_ME2_CB_H__
+
+#include <asm/rte_cb.h>		/* Common defs for Midas RTE-CB boards.  */
+
+
+#define PLATFORM		"rte-v850e/me2-cb"
+#define PLATFORM_LONG		"Midas lab RTE-V850E/ME2-CB"
+
+#define CPU_CLOCK_FREQ		150000000 /* 150MHz */
+#define FIXED_BOGOMIPS		50
+
+/* 32MB of onbard SDRAM.  */
+#define SDRAM_ADDR		0x00800000
+#define SDRAM_SIZE		0x02000000 /* 32MB */
+
+
+/* CPU addresses of GBUS memory spaces.  */
+#define GCS0_ADDR		0x04000000 /* GCS0 - Common SRAM (2MB) */
+#define GCS0_SIZE		0x00800000 /*   8MB */
+#define GCS1_ADDR		0x04800000 /* GCS1 - Flash ROM (8MB) */
+#define GCS1_SIZE		0x00800000 /*   8MB */
+#define GCS2_ADDR		0x07000000 /* GCS2 - I/O registers */
+#define GCS2_SIZE		0x00800000 /*   8MB */
+#define GCS5_ADDR		0x08000000 /* GCS5 - PCI bus space */
+#define GCS5_SIZE		0x02000000 /*   32MB */
+#define GCS6_ADDR		0x07800000 /* GCS6 - PCI control registers */
+#define GCS6_SIZE		0x00800000 /*   8MB */
+
+
+/* For <asm/page.h> */
+#define PAGE_OFFSET 		SDRAM_ADDR
+
+
+#ifdef CONFIG_ROM_KERNEL
+/* Kernel is in ROM, starting at address 0.  */
+
+#define INTV_BASE		0
+#define ROOT_FS_IMAGE_RW	0
+
+#else /* !CONFIG_ROM_KERNEL */
+/* Using RAM-kernel.  Assume some sort of boot-loader got us loaded at
+   address 0.  */
+
+#define INTV_BASE		0
+#define ROOT_FS_IMAGE_RW	1
+
+#endif /* CONFIG_ROM_KERNEL */
+
+
+/* Some misc. on-board devices.  */
+
+/* Seven-segment LED display (four digits).  */
+#define LED_ADDR(n)		(0x0FE02000 + (n))
+#define LED(n)			(*(volatile unsigned char *)LED_ADDR(n))
+#define LED_NUM_DIGITS		4
+
+
+/* On-board PIC.  */
+
+#define CB_PIC_BASE_ADDR 	0x0FE04000
+
+#define CB_PIC_INT0M_ADDR 	(CB_PIC_BASE_ADDR + 0x00)
+#define CB_PIC_INT0M      	(*(volatile u16 *)CB_PIC_INT0M_ADDR)
+#define CB_PIC_INT1M_ADDR 	(CB_PIC_BASE_ADDR + 0x10)
+#define CB_PIC_INT1M      	(*(volatile u16 *)CB_PIC_INT1M_ADDR)
+#define CB_PIC_INTR_ADDR  	(CB_PIC_BASE_ADDR + 0x20)
+#define CB_PIC_INTR       	(*(volatile u16 *)CB_PIC_INTR_ADDR)
+#define CB_PIC_INTEN_ADDR 	(CB_PIC_BASE_ADDR + 0x30)
+#define CB_PIC_INTEN      	(*(volatile u16 *)CB_PIC_INTEN_ADDR)
+
+#define CB_PIC_INT0EN        	0x0001
+#define CB_PIC_INT1EN        	0x0002
+#define CB_PIC_INT0SEL       	0x0080
+
+/* The PIC interrupts themselves.  */
+#define CB_PIC_BASE_IRQ		NUM_CPU_IRQS
+#define IRQ_CB_PIC_NUM		10
+
+/* Some specific CB_PIC interrupts. */
+#define IRQ_CB_EXTTM0		(CB_PIC_BASE_IRQ + 0)
+#define IRQ_CB_EXTSIO		(CB_PIC_BASE_IRQ + 1)
+#define IRQ_CB_TOVER		(CB_PIC_BASE_IRQ + 2)
+#define IRQ_CB_GINT0		(CB_PIC_BASE_IRQ + 3)
+#define IRQ_CB_USB		(CB_PIC_BASE_IRQ + 4)
+#define IRQ_CB_LANC		(CB_PIC_BASE_IRQ + 5)
+#define IRQ_CB_USB_VBUS_ON	(CB_PIC_BASE_IRQ + 6)
+#define IRQ_CB_USB_VBUS_OFF	(CB_PIC_BASE_IRQ + 7)
+#define IRQ_CB_EXTTM1		(CB_PIC_BASE_IRQ + 8)
+#define IRQ_CB_EXTTM2		(CB_PIC_BASE_IRQ + 9)
+
+/* The GBUS GINT1 - GINT3 (note, not GINT0!) interrupts are connected to
+   the INTP65 - INTP67 pins on the CPU.  These are shared among the GBUS
+   interrupts.  */
+#define IRQ_GINT(n)		IRQ_INTP((n) + 9)  /* 0 is unused! */
+#define IRQ_GINT_NUM		4		   /* 0 is unused! */
+
+/* The shared interrupt line from the PIC is connected to CPU pin INTP23.  */
+#define IRQ_CB_PIC		IRQ_INTP(4) /* P23 */
+
+/* Used by <asm/rte_cb.h> to derive NUM_MACH_IRQS.  */
+#define NUM_RTE_CB_IRQS		(NUM_CPU_IRQS + IRQ_CB_PIC_NUM)
+
+
+#ifndef __ASSEMBLY__
+struct cb_pic_irq_init {
+	const char *name;	/* name of interrupt type */
+
+	/* Range of kernel irq numbers for this type:
+	   BASE, BASE+INTERVAL, ..., BASE+INTERVAL*NUM  */
+	unsigned base, num, interval;
+
+	unsigned priority;	/* interrupt priority to assign */
+};
+struct hw_interrupt_type;	/* fwd decl */
+
+/* Enable interrupt handling for interrupt IRQ.  */
+extern void cb_pic_enable_irq (unsigned irq);
+/* Disable interrupt handling for interrupt IRQ.  Note that any interrupts
+   received while disabled will be delivered once the interrupt is enabled
+   again, unless they are explicitly cleared using `cb_pic_clear_pending_irq'.  */
+extern void cb_pic_disable_irq (unsigned irq);
+/* Initialize HW_IRQ_TYPES for PIC irqs described in array INITS (which is
+   terminated by an entry with the name field == 0).  */
+extern void cb_pic_init_irq_types (struct cb_pic_irq_init *inits,
+				   struct hw_interrupt_type *hw_irq_types);
+/* Initialize PIC interrupts.  */
+extern void cb_pic_init_irqs (void);
+#endif /* __ASSEMBLY__ */
+
+
+/* TL16C550C on board UART see also asm/serial.h */
+#define CB_UART_BASE    	0x0FE08000
+#define CB_UART_REG_GAP 	0x10
+#define CB_UART_CLOCK   	0x16000000
+
+/* CompactFlash setting */
+#define CB_CF_BASE     		0x0FE0C000
+#define CB_CF_CCR_ADDR 		(CB_CF_BASE+0x200)
+#define CB_CF_CCR      		(*(volatile u8 *)CB_CF_CCR_ADDR)
+#define CB_CF_REG0_ADDR		(CB_CF_BASE+0x1000)
+#define CB_CF_REG0     		(*(volatile u16 *)CB_CF_REG0_ADDR)
+#define CB_CF_STS0_ADDR		(CB_CF_BASE+0x1004)
+#define CB_CF_STS0     		(*(volatile u16 *)CB_CF_STS0_ADDR)
+#define CB_PCATA_BASE  		(CB_CF_BASE+0x800)
+#define CB_IDE_BASE    		(CB_CF_BASE+0x9F0)
+#define CB_IDE_CTRL    		(CB_CF_BASE+0xBF6)
+#define CB_IDE_REG_OFFS		0x1
+
+
+/* SMSC LAN91C111 setting */
+#if defined(CONFIG_SMC91111)
+#define CB_LANC_BASE 		0x0FE10300
+#define CONFIG_SMC16BITONLY
+#define ETH0_ADDR 		CB_LANC_BASE
+#define ETH0_IRQ 		IRQ_CB_LANC
+#endif /* CONFIG_SMC16BITONLY */
+
+
+#undef V850E_UART_PRE_CONFIGURE
+#define V850E_UART_PRE_CONFIGURE	rte_me2_cb_uart_pre_configure
+#ifndef __ASSEMBLY__
+extern void rte_me2_cb_uart_pre_configure (unsigned chan,
+					   unsigned cflags, unsigned baud);
+#endif /* __ASSEMBLY__ */
+
+/* This board supports RTS/CTS for the on-chip UART, but only for channel 0. */
+
+/* CTS for UART channel 0 is pin P22 (bit 2 of port 2).  */
+#define V850E_UART_CTS(chan)	((chan) == 0 ? !(ME2_PORT2_IO & 0x4) : 1)
+/* RTS for UART channel 0 is pin P21 (bit 1 of port 2).  */
+#define V850E_UART_SET_RTS(chan, val)					      \
+   do {									      \
+	   if (chan == 0) {						      \
+		   unsigned old = ME2_PORT2_IO; 			      \
+		   if (val)						      \
+			   ME2_PORT2_IO = old & ~0x2;			      \
+		   else							      \
+			   ME2_PORT2_IO = old | 0x2;			      \
+	   }								      \
+   } while (0)
+
+
+#ifndef __ASSEMBLY__
+extern void rte_me2_cb_init_irqs (void);
+#endif /* !__ASSEMBLY__ */
+
+
+#endif /* __V850_RTE_ME2_CB_H__ */
diff --git a/include/asm-v850/rte_nb85e_cb.h b/include/asm-v850/rte_nb85e_cb.h
new file mode 100644
index 0000000..f56591c
--- /dev/null
+++ b/include/asm-v850/rte_nb85e_cb.h
@@ -0,0 +1,111 @@
+/*
+ * include/asm-v850/rte_nb85e_cb.h -- Midas labs RTE-V850/NB85E-CB board
+ *
+ *  Copyright (C) 2001,02,03  NEC Electronics Corporation
+ *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef __V850_RTE_NB85E_CB_H__
+#define __V850_RTE_NB85E_CB_H__
+
+#include <asm/rte_cb.h>		/* Common defs for Midas RTE-CB boards.  */
+
+
+#define PLATFORM		"rte-v850e/nb85e-cb"
+#define PLATFORM_LONG		"Midas lab RTE-V850E/NB85E-CB"
+
+#define CPU_CLOCK_FREQ		50000000 /* 50MHz */
+
+/* 1MB of onboard SRAM.  Note that the monitor ROM uses parts of this
+   for its own purposes, so care must be taken.  */
+#define SRAM_ADDR		0x03C00000
+#define SRAM_SIZE		0x00100000 /* 1MB */
+
+/* 16MB of onbard SDRAM.  */
+#define SDRAM_ADDR		0x01000000
+#define SDRAM_SIZE		0x01000000 /* 16MB */
+
+
+/* CPU addresses of GBUS memory spaces.  */
+#define GCS0_ADDR		0x00400000 /* GCS0 - Common SRAM (2MB) */
+#define GCS0_SIZE		0x00400000 /*   4MB */
+#define GCS1_ADDR		0x02000000 /* GCS1 - Flash ROM (8MB) */
+#define GCS1_SIZE		0x00800000 /*   8MB */
+#define GCS2_ADDR		0x03900000 /* GCS2 - I/O registers */
+#define GCS2_SIZE		0x00080000 /*   512KB */
+#define GCS3_ADDR		0x02800000 /* GCS3 - EXT-bus: memory space */
+#define GCS3_SIZE		0x00800000 /*   8MB */
+#define GCS4_ADDR		0x03A00000 /* GCS4 - EXT-bus: I/O space */
+#define GCS4_SIZE		0x00200000 /*   2MB */
+#define GCS5_ADDR		0x00800000 /* GCS5 - PCI bus space */
+#define GCS5_SIZE		0x00800000 /*   8MB */
+#define GCS6_ADDR		0x03980000 /* GCS6 - PCI control registers */
+#define GCS6_SIZE		0x00010000 /*   64KB */
+
+
+/* The GBUS GINT0 - GINT3 interrupts are connected to CPU interrupts 10-12.
+   These are shared among the GBUS interrupts.  */
+#define IRQ_GINT(n)		(10 + (n))
+#define IRQ_GINT_NUM		3
+
+/* Used by <asm/rte_cb.h> to derive NUM_MACH_IRQS.  */
+#define NUM_RTE_CB_IRQS		NUM_CPU_IRQS
+
+
+#ifdef CONFIG_ROM_KERNEL
+/* Kernel is in ROM, starting at address 0.  */
+
+#define INTV_BASE	0
+
+#else /* !CONFIG_ROM_KERNEL */
+/* We're using the ROM monitor.  */
+
+/* The chip's real interrupt vectors are in ROM, but they jump to a
+   secondary interrupt vector table in RAM.  */
+#define INTV_BASE		0x03CF8000
+
+/* Scratch memory used by the ROM monitor, which shouldn't be used by
+   linux (except for the alternate interrupt vector area, defined
+   above).  */
+#define MON_SCRATCH_ADDR	0x03CE8000
+#define MON_SCRATCH_SIZE	0x00018000 /* 96KB */
+
+#endif /* CONFIG_ROM_KERNEL */
+
+
+/* Some misc. on-board devices.  */
+
+/* Seven-segment LED display (two digits).  Write-only.  */
+#define LED_ADDR(n)	(0x03802000 + (n))
+#define LED(n)		(*(volatile unsigned char *)LED_ADDR(n))
+#define LED_NUM_DIGITS	4
+
+
+/* Override the basic TEG UART pre-initialization so that we can
+   initialize extra stuff.  */
+#undef V850E_UART_PRE_CONFIGURE	/* should be defined by <asm/teg.h> */
+#define V850E_UART_PRE_CONFIGURE	rte_nb85e_cb_uart_pre_configure
+#ifndef __ASSEMBLY__
+extern void rte_nb85e_cb_uart_pre_configure (unsigned chan,
+					     unsigned cflags, unsigned baud);
+#endif
+
+/* This board supports RTS/CTS for the on-chip UART. */
+
+/* CTS is pin P00.  */
+#define V850E_UART_CTS(chan)	(! (TEG_PORT0_IO & 0x1))
+/* RTS is pin P02.  */
+#define V850E_UART_SET_RTS(chan, val)					      \
+   do {									      \
+	   unsigned old = TEG_PORT0_IO;					      \
+	   TEG_PORT0_IO = val ? (old & ~0x4) : (old | 0x4);		      \
+   } while (0)
+
+
+#endif /* __V850_RTE_NB85E_CB_H__ */
diff --git a/include/asm-v850/scatterlist.h b/include/asm-v850/scatterlist.h
new file mode 100644
index 0000000..af1cba6
--- /dev/null
+++ b/include/asm-v850/scatterlist.h
@@ -0,0 +1,26 @@
+/*
+ * include/asm-v850/scatterlist.h
+ *
+ *  Copyright (C) 2001,02  NEC Corporation
+ *  Copyright (C) 2001,02  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef __V850_SCATTERLIST_H__
+#define __V850_SCATTERLIST_H__
+
+struct scatterlist {
+	struct page	*page;
+	unsigned	offset;
+	dma_addr_t	dma_address;
+	unsigned	length;
+};
+
+#define ISA_DMA_THRESHOLD	(~0UL)
+
+#endif /* __V850_SCATTERLIST_H__ */
diff --git a/include/asm-v850/sections.h b/include/asm-v850/sections.h
new file mode 100644
index 0000000..e023825
--- /dev/null
+++ b/include/asm-v850/sections.h
@@ -0,0 +1,6 @@
+#ifndef __V850_SECTIONS_H__
+#define __V850_SECTIONS_H__
+
+#include <asm-generic/sections.h>
+
+#endif /* __V850_SECTIONS_H__ */
diff --git a/include/asm-v850/segment.h b/include/asm-v850/segment.h
new file mode 100644
index 0000000..5e2b15d
--- /dev/null
+++ b/include/asm-v850/segment.h
@@ -0,0 +1,36 @@
+#ifndef __V850_SEGMENT_H__
+#define __V850_SEGMENT_H__
+
+
+#ifndef __ASSEMBLY__
+
+typedef unsigned long mm_segment_t;	/* domain register */
+
+#endif /* !__ASSEMBLY__ */
+
+
+#define __KERNEL_CS	0x0
+#define __KERNEL_DS	0x0
+
+#define __USER_CS	0x1
+#define __USER_DS	0x1
+
+#define KERNEL_DS	__KERNEL_DS
+#define KERNEL_CS	__KERNEL_CS
+#define USER_DS		__USER_DS
+#define USER_CS		__USER_CS
+
+#define segment_eq(a,b)	((a) == (b))
+
+#define get_ds()	(KERNEL_DS)
+#define get_fs()	(USER_DS)
+
+#define set_fs(seg)	((void)(seg))
+
+
+#define copy_segments(task, mm)	((void)((void)(task), (mm)))
+#define release_segments(mm)	((void)(mm))
+#define forget_segments()	((void)0)
+
+
+#endif /* __V850_SEGMENT_H__ */
diff --git a/include/asm-v850/semaphore.h b/include/asm-v850/semaphore.h
new file mode 100644
index 0000000..c514062
--- /dev/null
+++ b/include/asm-v850/semaphore.h
@@ -0,0 +1,88 @@
+#ifndef __V850_SEMAPHORE_H__
+#define __V850_SEMAPHORE_H__
+
+#include <linux/linkage.h>
+#include <linux/spinlock.h>
+#include <linux/wait.h>
+#include <linux/rwsem.h>
+
+#include <asm/atomic.h>
+
+struct semaphore {
+	atomic_t count;
+	int sleepers;
+	wait_queue_head_t wait;
+};
+
+#define __SEMAPHORE_INITIALIZER(name,count)				      \
+	{ ATOMIC_INIT (count), 0,					      \
+	  __WAIT_QUEUE_HEAD_INITIALIZER ((name).wait) }
+
+#define __MUTEX_INITIALIZER(name)					      \
+	__SEMAPHORE_INITIALIZER (name,1)
+
+#define __DECLARE_SEMAPHORE_GENERIC(name,count)	\
+	struct semaphore name = __SEMAPHORE_INITIALIZER (name,count)
+
+#define DECLARE_MUTEX(name)		__DECLARE_SEMAPHORE_GENERIC (name,1)
+#define DECLARE_MUTEX_LOCKED(name)	__DECLARE_SEMAPHORE_GENERIC (name,0)
+
+extern inline void sema_init (struct semaphore *sem, int val)
+{
+	*sem = (struct semaphore)__SEMAPHORE_INITIALIZER((*sem),val);
+}
+
+static inline void init_MUTEX (struct semaphore *sem)
+{
+	sema_init (sem, 1);
+}
+
+static inline void init_MUTEX_LOCKED (struct semaphore *sem)
+{
+	sema_init (sem, 0);
+}
+
+/*
+ * special register calling convention
+ */
+asmlinkage void __down_failed (void);
+asmlinkage int  __down_interruptible_failed (void);
+asmlinkage int  __down_trylock_failed (void);
+asmlinkage void __up_wakeup (void);
+
+extern void __down (struct semaphore * sem);
+extern int  __down_interruptible (struct semaphore * sem);
+extern int  __down_trylock (struct semaphore * sem);
+extern void __up (struct semaphore * sem);
+
+extern inline void down (struct semaphore * sem)
+{
+	might_sleep();
+	if (atomic_dec_return (&sem->count) < 0)
+		__down (sem);
+}
+
+extern inline int down_interruptible (struct semaphore * sem)
+{
+	int ret = 0;
+	might_sleep();
+	if (atomic_dec_return (&sem->count) < 0)
+		ret = __down_interruptible (sem);
+	return ret;
+}
+
+extern inline int down_trylock (struct semaphore *sem)
+{
+	int ret = 0;
+	if (atomic_dec_return (&sem->count) < 0)
+		ret = __down_trylock (sem);
+	return ret;
+}
+
+extern inline void up (struct semaphore * sem)
+{
+	if (atomic_inc_return (&sem->count) <= 0)
+		__up (sem);
+}
+
+#endif /* __V850_SEMAPHORE_H__ */
diff --git a/include/asm-v850/sembuf.h b/include/asm-v850/sembuf.h
new file mode 100644
index 0000000..1622231
--- /dev/null
+++ b/include/asm-v850/sembuf.h
@@ -0,0 +1,25 @@
+#ifndef __V850_SEMBUF_H__
+#define __V850_SEMBUF_H__
+
+/* 
+ * The semid64_ds structure for v850 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct semid64_ds {
+	struct ipc64_perm sem_perm;		/* permissions .. see ipc.h */
+	__kernel_time_t	sem_otime;		/* last semop time */
+	unsigned long	__unused1;
+	__kernel_time_t	sem_ctime;		/* last change time */
+	unsigned long	__unused2;
+	unsigned long	sem_nsems;		/* no. of semaphores in array */
+	unsigned long	__unused3;
+	unsigned long	__unused4;
+};
+
+#endif /* __V850_SEMBUF_H__ */
diff --git a/include/asm-v850/serial.h b/include/asm-v850/serial.h
new file mode 100644
index 0000000..8c2a609
--- /dev/null
+++ b/include/asm-v850/serial.h
@@ -0,0 +1,57 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1999 by Ralf Baechle
+ * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
+ */ 
+#include <linux/config.h>
+
+#ifdef CONFIG_RTE_CB_ME2
+
+#include <asm/rte_me2_cb.h>
+
+#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
+
+#define irq_cannonicalize(x) (x)
+#define BASE_BAUD	250000	/* (16MHz / (16 * 38400)) * 9600 */
+#define SERIAL_PORT_DFNS \
+   { 0, BASE_BAUD, CB_UART_BASE, IRQ_CB_EXTSIO, STD_COM_FLAGS },
+
+/* Redefine UART register offsets.  */
+#undef UART_RX
+#undef UART_TX
+#undef UART_DLL
+#undef UART_TRG
+#undef UART_DLM
+#undef UART_IER
+#undef UART_FCTR
+#undef UART_IIR
+#undef UART_FCR
+#undef UART_EFR
+#undef UART_LCR
+#undef UART_MCR
+#undef UART_LSR
+#undef UART_MSR
+#undef UART_SCR
+#undef UART_EMSR
+
+#define UART_RX		(0 * CB_UART_REG_GAP)
+#define UART_TX		(0 * CB_UART_REG_GAP)
+#define UART_DLL	(0 * CB_UART_REG_GAP)
+#define UART_TRG	(0 * CB_UART_REG_GAP)
+#define UART_DLM	(1 * CB_UART_REG_GAP)
+#define UART_IER	(1 * CB_UART_REG_GAP)
+#define UART_FCTR	(1 * CB_UART_REG_GAP)
+#define UART_IIR	(2 * CB_UART_REG_GAP)
+#define UART_FCR	(2 * CB_UART_REG_GAP)
+#define UART_EFR	(2 * CB_UART_REG_GAP)
+#define UART_LCR	(3 * CB_UART_REG_GAP)
+#define UART_MCR	(4 * CB_UART_REG_GAP)
+#define UART_LSR	(5 * CB_UART_REG_GAP)
+#define UART_MSR	(6 * CB_UART_REG_GAP)
+#define UART_SCR	(7 * CB_UART_REG_GAP)
+#define UART_EMSR	(7 * CB_UART_REG_GAP)
+
+#endif /* CONFIG_RTE_CB_ME2 */
diff --git a/include/asm-v850/setup.h b/include/asm-v850/setup.h
new file mode 100644
index 0000000..c48a9b9
--- /dev/null
+++ b/include/asm-v850/setup.h
@@ -0,0 +1,6 @@
+#ifndef _V850_SETUP_H
+#define _V850_SETUP_H
+
+#define COMMAND_LINE_SIZE	512
+
+#endif /* __SETUP_H */
diff --git a/include/asm-v850/shmbuf.h b/include/asm-v850/shmbuf.h
new file mode 100644
index 0000000..3d085c9
--- /dev/null
+++ b/include/asm-v850/shmbuf.h
@@ -0,0 +1,42 @@
+#ifndef __V850_SHMBUF_H__
+#define __V850_SHMBUF_H__
+
+/* 
+ * The shmid64_ds structure for v850 architecture.
+ * Note extra padding because this structure is passed back and forth
+ * between kernel and user space.
+ *
+ * Pad space is left for:
+ * - 64-bit time_t to solve y2038 problem
+ * - 2 miscellaneous 32-bit values
+ */
+
+struct shmid64_ds {
+	struct ipc64_perm	shm_perm;	/* operation perms */
+	size_t			shm_segsz;	/* size of segment (bytes) */
+	__kernel_time_t		shm_atime;	/* last attach time */
+	unsigned long		__unused1;
+	__kernel_time_t		shm_dtime;	/* last detach time */
+	unsigned long		__unused2;
+	__kernel_time_t		shm_ctime;	/* last change time */
+	unsigned long		__unused3;
+	__kernel_pid_t		shm_cpid;	/* pid of creator */
+	__kernel_pid_t		shm_lpid;	/* pid of last operator */
+	unsigned long		shm_nattch;	/* no. of current attaches */
+	unsigned long		__unused4;
+	unsigned long		__unused5;
+};
+
+struct shminfo64 {
+	unsigned long	shmmax;
+	unsigned long	shmmin;
+	unsigned long	shmmni;
+	unsigned long	shmseg;
+	unsigned long	shmall;
+	unsigned long	__unused1;
+	unsigned long	__unused2;
+	unsigned long	__unused3;
+	unsigned long	__unused4;
+};
+
+#endif /* __V850_SHMBUF_H__ */
diff --git a/include/asm-v850/shmparam.h b/include/asm-v850/shmparam.h
new file mode 100644
index 0000000..7dcb673
--- /dev/null
+++ b/include/asm-v850/shmparam.h
@@ -0,0 +1,6 @@
+#ifndef __V850_SHMPARAM_H__
+#define __V850_SHMPARAM_H__
+
+#define	SHMLBA		PAGE_SIZE	/* attach addr a multiple of this */
+
+#endif /* __V850_SHMPARAM_H__ */
diff --git a/include/asm-v850/sigcontext.h b/include/asm-v850/sigcontext.h
new file mode 100644
index 0000000..e0890f6
--- /dev/null
+++ b/include/asm-v850/sigcontext.h
@@ -0,0 +1,25 @@
+/*
+ * include/asm-v850/sigcontext.h -- Signal contexts
+ *
+ *  Copyright (C) 2001  NEC Corporation
+ *  Copyright (C) 2001  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef __V850_SIGCONTEXT_H__
+#define __V850_SIGCONTEXT_H__
+
+#include <asm/ptrace.h>
+
+struct sigcontext
+{
+	struct pt_regs 	regs;
+	unsigned long	oldmask;
+};
+
+#endif /* __V850_SIGCONTEXT_H__ */
diff --git a/include/asm-v850/siginfo.h b/include/asm-v850/siginfo.h
new file mode 100644
index 0000000..7eb9470
--- /dev/null
+++ b/include/asm-v850/siginfo.h
@@ -0,0 +1,6 @@
+#ifndef __V850_SIGINFO_H__
+#define __V850_SIGINFO_H__
+
+#include <asm-generic/siginfo.h>
+
+#endif /* __V850_SIGINFO_H__ */
diff --git a/include/asm-v850/signal.h b/include/asm-v850/signal.h
new file mode 100644
index 0000000..407db87
--- /dev/null
+++ b/include/asm-v850/signal.h
@@ -0,0 +1,195 @@
+#ifndef __V850_SIGNAL_H__
+#define __V850_SIGNAL_H__
+
+#include <linux/types.h>
+
+/* Avoid too many header ordering problems.  */
+struct siginfo;
+
+
+#ifdef __KERNEL__
+
+/* Most things should be clean enough to redefine this at will, if care
+   is taken to make libc match.  */
+#define _NSIG		64
+#define _NSIG_BPW	32
+#define _NSIG_WORDS	(_NSIG / _NSIG_BPW)
+
+typedef unsigned long old_sigset_t;		/* at least 32 bits */
+
+typedef struct {
+	unsigned long sig[_NSIG_WORDS];
+} sigset_t;
+
+#else /* !__KERNEL__ */
+
+/* Here we must cater to libcs that poke about in kernel headers.  */
+
+#define NSIG		32
+typedef unsigned long sigset_t;
+
+#endif /* __KERNEL__ */
+
+
+#define SIGHUP		 1
+#define SIGINT		 2
+#define SIGQUIT		 3
+#define SIGILL		 4
+#define SIGTRAP		 5
+#define SIGABRT		 6
+#define SIGIOT		 6
+#define SIGBUS		 7
+#define SIGFPE		 8
+#define SIGKILL		 9
+#define SIGUSR1		10
+#define SIGSEGV		11
+#define SIGUSR2		12
+#define SIGPIPE		13
+#define SIGALRM		14
+#define SIGTERM		15
+#define SIGSTKFLT	16
+#define SIGCHLD		17
+#define SIGCONT		18
+#define SIGSTOP		19
+#define SIGTSTP		20
+#define SIGTTIN		21
+#define SIGTTOU		22
+#define SIGURG		23
+#define SIGXCPU		24
+#define SIGXFSZ		25
+#define SIGVTALRM	26
+#define SIGPROF		27
+#define SIGWINCH	28
+#define SIGIO		29
+#define SIGPOLL		SIGIO
+/*
+#define SIGLOST		29
+*/
+#define SIGPWR		30
+#define SIGSYS		31
+#define	SIGUNUSED	31
+
+/* These should not be considered constants from userland.  */
+#define SIGRTMIN	32
+#define SIGRTMAX	_NSIG
+
+/*
+ * SA_FLAGS values:
+ *
+ * SA_ONSTACK indicates that a registered stack_t will be used.
+ * SA_INTERRUPT is a no-op, but left due to historical reasons. Use the
+ * SA_RESTART flag to get restarting signals (which were the default long ago)
+ * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
+ * SA_RESETHAND clears the handler when the signal is delivered.
+ * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
+ * SA_NODEFER prevents the current signal from being masked in the handler.
+ *
+ * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
+ * Unix names RESETHAND and NODEFER respectively.
+ */
+#define SA_NOCLDSTOP	0x00000001
+#define SA_NOCLDWAIT	0x00000002
+#define SA_SIGINFO	0x00000004
+#define SA_ONSTACK	0x08000000
+#define SA_RESTART	0x10000000
+#define SA_NODEFER	0x40000000
+#define SA_RESETHAND	0x80000000
+
+#define SA_NOMASK	SA_NODEFER
+#define SA_ONESHOT	SA_RESETHAND
+#define SA_INTERRUPT	0x20000000 /* dummy -- ignored */
+
+#define SA_RESTORER	0x04000000
+
+/* 
+ * sigaltstack controls
+ */
+#define SS_ONSTACK	1
+#define SS_DISABLE	2
+
+#define MINSIGSTKSZ	2048
+#define SIGSTKSZ	8192
+
+
+#ifdef __KERNEL__
+/*
+ * These values of sa_flags are used only by the kernel as part of the
+ * irq handling routines.
+ *
+ * SA_INTERRUPT is also used by the irq handling routines.
+ * SA_SHIRQ is for shared interrupt support on PCI and EISA.
+ */
+#define SA_PROBE		SA_ONESHOT
+#define SA_SAMPLE_RANDOM	SA_RESTART
+#define SA_SHIRQ		0x04000000
+#endif /* __KERNEL__ */
+
+
+#define SIG_BLOCK          0	/* for blocking signals */
+#define SIG_UNBLOCK        1	/* for unblocking signals */
+#define SIG_SETMASK        2	/* for setting the signal mask */
+
+/* Type of a signal handler.  */
+typedef void (*__sighandler_t)(int);
+
+#define SIG_DFL	((__sighandler_t)0)	/* default signal handling */
+#define SIG_IGN	((__sighandler_t)1)	/* ignore signal */
+#define SIG_ERR	((__sighandler_t)-1)	/* error return from signal */
+
+
+#ifdef __KERNEL__
+
+struct old_sigaction {
+	__sighandler_t sa_handler;
+	old_sigset_t sa_mask;
+	unsigned long sa_flags;
+	void (*sa_restorer)(void);
+};
+
+struct sigaction {
+	__sighandler_t sa_handler;
+	unsigned long sa_flags;
+	void (*sa_restorer)(void);
+	sigset_t sa_mask;		/* mask last for extensibility */
+};
+
+struct k_sigaction {
+	struct sigaction sa;
+};
+
+#else /* !__KERNEL__ */
+
+/* Here we must cater to libcs that poke about in kernel headers.  */
+
+struct sigaction {
+	union {
+	  __sighandler_t _sa_handler;
+	  void (*_sa_sigaction)(int, struct siginfo *, void *);
+	} _u;
+	sigset_t sa_mask;
+	unsigned long sa_flags;
+	void (*sa_restorer)(void);
+};
+
+#define sa_handler	_u._sa_handler
+#define sa_sigaction	_u._sa_sigaction
+
+#endif /* __KERNEL__ */
+
+
+typedef struct sigaltstack {
+	void *ss_sp;
+	int ss_flags;
+	size_t ss_size;
+} stack_t;
+
+#ifdef __KERNEL__
+
+#include <asm/sigcontext.h>
+#undef __HAVE_ARCH_SIG_BITOPS
+
+#define ptrace_signal_deliver(regs, cookie) do { } while (0)
+
+#endif /* __KERNEL__ */
+
+#endif /* __V850_SIGNAL_H__ */
diff --git a/include/asm-v850/sim.h b/include/asm-v850/sim.h
new file mode 100644
index 0000000..10236ab
--- /dev/null
+++ b/include/asm-v850/sim.h
@@ -0,0 +1,52 @@
+/*
+ * include/asm-v850/sim.h -- Machine-dependent defs for GDB v850e simulator
+ *
+ *  Copyright (C) 2001,02,03  NEC Electronics Corporation
+ *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef __V850_SIM_H__
+#define __V850_SIM_H__
+
+
+#define CPU_ARCH		"v850e"
+#define CPU_MODEL		"v850e"
+#define CPU_MODEL_LONG		"NEC V850E"
+#define PLATFORM		"gdb/v850e"
+#define PLATFORM_LONG		"GDB V850E simulator"
+
+
+/* We use a weird value for RAM, not just 0, for testing purposes.
+   These must match the values used in the linker script.  */
+#define RAM_ADDR		0x8F000000
+#define RAM_SIZE		0x03000000
+
+
+/* For <asm/page.h> */
+#define PAGE_OFFSET 		RAM_ADDR
+
+
+/* For <asm/entry.h> */
+/* `R0 RAM', used for a few miscellaneous variables that must be
+   accessible using a load instruction relative to R0.  On real
+   processors, this usually is on-chip RAM, but here we just
+   choose an arbitrary address that meets the above constraint.  */
+#define R0_RAM_ADDR		0xFFFFF000
+
+
+/* For <asm/param.h> */
+#ifndef HZ
+#define HZ			24	/* Minimum supported frequency.  */
+#endif
+
+/* For <asm/irq.h> */
+#define NUM_CPU_IRQS		6
+
+
+#endif /* __V850_SIM_H__ */
diff --git a/include/asm-v850/sim85e2.h b/include/asm-v850/sim85e2.h
new file mode 100644
index 0000000..17dd4fa
--- /dev/null
+++ b/include/asm-v850/sim85e2.h
@@ -0,0 +1,75 @@
+/*
+ * include/asm-v850/sim85e2.h -- Machine-dependent defs for
+ *	V850E2 RTL simulator
+ *
+ *  Copyright (C) 2002,03  NEC Electronics Corporation
+ *  Copyright (C) 2002,03  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef __V850_SIM85E2_H__
+#define __V850_SIM85E2_H__
+
+
+#include <asm/v850e2.h>		/* Based on V850E2 core.  */
+
+
+/* Various memory areas supported by the simulator.
+   These should match the corresponding definitions in the linker script.  */
+
+/* `instruction RAM'; instruction fetches are much faster from IRAM than
+   from DRAM.  */
+#define IRAM_ADDR		0
+#define IRAM_SIZE		0x00100000 /* 1MB */
+/* `data RAM', below and contiguous with the I/O space.
+   Data fetches are much faster from DRAM than from IRAM.  */
+#define DRAM_ADDR		0xfff00000
+#define DRAM_SIZE		0x000ff000 /* 1020KB */
+/* `external ram'.  Unlike the above RAM areas, this memory is cached,
+   so both instruction and data fetches should be (mostly) fast --
+   however, currently only write-through caching is supported, so writes
+   to ERAM will be slow.  */
+#define ERAM_ADDR		0x00100000
+#define ERAM_SIZE		0x07f00000 /* 127MB (max) */
+/* Dynamic RAM; uses memory controller.  */
+#define SDRAM_ADDR		0x10000000
+#define SDRAM_SIZE		0x01000000 /* 16MB */
+
+
+/* Simulator specific control registers.  */
+/* NOTHAL controls whether the simulator will stop at a `halt' insn.  */
+#define SIM85E2_NOTHAL_ADDR	0xffffff22
+#define SIM85E2_NOTHAL		(*(volatile u8 *)SIM85E2_NOTHAL_ADDR)
+/* The simulator will stop N cycles after N is written to SIMFIN.  */
+#define SIM85E2_SIMFIN_ADDR	0xffffff24
+#define SIM85E2_SIMFIN		(*(volatile u16 *)SIM85E2_SIMFIN_ADDR)
+
+
+/* For <asm/irq.h> */
+#define NUM_CPU_IRQS		64
+
+
+/* For <asm/page.h> */
+#define PAGE_OFFSET		SDRAM_ADDR
+
+
+/* For <asm/entry.h> */
+/* `R0 RAM', used for a few miscellaneous variables that must be accessible
+   using a load instruction relative to R0.  The sim85e2 simulator
+   actually puts 1020K of RAM from FFF00000 to FFFFF000, so we arbitarily
+   choose a small portion at the end of that.  */
+#define R0_RAM_ADDR		0xFFFFE000
+
+
+/* For <asm/param.h> */
+#ifndef HZ
+#define HZ			24	/* Minimum supported frequency.  */
+#endif
+
+
+#endif /* __V850_SIM85E2_H__ */
diff --git a/include/asm-v850/sim85e2c.h b/include/asm-v850/sim85e2c.h
new file mode 100644
index 0000000..eee543f
--- /dev/null
+++ b/include/asm-v850/sim85e2c.h
@@ -0,0 +1,26 @@
+/*
+ * include/asm-v850/sim85e2c.h -- Machine-dependent defs for
+ *	V850E2 RTL simulator
+ *
+ *  Copyright (C) 2002  NEC Corporation
+ *  Copyright (C) 2002  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef __V850_SIM85E2C_H__
+#define __V850_SIM85E2C_H__
+
+/* Use generic sim85e2 settings, other than the various names.  */
+#include <asm/sim85e2.h>
+
+#define CPU_MODEL	"v850e2"
+#define CPU_MODEL_LONG	"NEC V850E2"
+#define PLATFORM	"sim85e2c"
+#define PLATFORM_LONG	"SIM85E2C V850E2 simulator"
+
+#endif /* __V850_SIM85E2C_H__ */
diff --git a/include/asm-v850/sim85e2s.h b/include/asm-v850/sim85e2s.h
new file mode 100644
index 0000000..ee066d5
--- /dev/null
+++ b/include/asm-v850/sim85e2s.h
@@ -0,0 +1,28 @@
+/*
+ * include/asm-v850/sim85e2s.h -- Machine-dependent defs for
+ *	V850E2 RTL simulator
+ *
+ *  Copyright (C) 2003  NEC Electronics Corporation
+ *  Copyright (C) 2003  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef __V850_SIM85E2S_H__
+#define __V850_SIM85E2S_H__
+
+#include <asm/sim85e2.h>	/* Use generic sim85e2 settings.  */
+#if 0
+#include <asm/v850e2_cache.h>	/* + cache */
+#endif
+
+#define CPU_MODEL	"v850e2"
+#define CPU_MODEL_LONG	"NEC V850E2"
+#define PLATFORM	"sim85e2s"
+#define PLATFORM_LONG	"SIM85E2S V850E2 simulator"
+
+#endif /* __V850_SIM85E2S_H__ */
diff --git a/include/asm-v850/simsyscall.h b/include/asm-v850/simsyscall.h
new file mode 100644
index 0000000..4a19d5a
--- /dev/null
+++ b/include/asm-v850/simsyscall.h
@@ -0,0 +1,99 @@
+/*
+ * include/asm-v850/simsyscall.h -- `System calls' under the v850e emulator
+ *
+ *  Copyright (C) 2001  NEC Corporation
+ *  Copyright (C) 2001  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef __V850_SIMSYSCALL_H__
+#define __V850_SIMSYSCALL_H__
+
+#define V850_SIM_SYS_exit(a...)		V850_SIM_SYSCALL_1 (1	, ##a)
+#define V850_SIM_SYS_fork(a...)		V850_SIM_SYSCALL_0 (2	, ##a)
+#define V850_SIM_SYS_read(a...)		V850_SIM_SYSCALL_3 (3	, ##a)
+#define V850_SIM_SYS_write(a...)	V850_SIM_SYSCALL_3 (4	, ##a)
+#define V850_SIM_SYS_open(a...)		V850_SIM_SYSCALL_2 (5	, ##a)
+#define V850_SIM_SYS_close(a...)	V850_SIM_SYSCALL_1 (6	, ##a)
+#define V850_SIM_SYS_wait4(a...)	V850_SIM_SYSCALL_4 (7	, ##a)
+/* #define V850_SIM_SYS_creat(a...)	V850_SIM_SYSCALL_1 (8	, ##a) */
+/* #define V850_SIM_SYS_link(a...)	V850_SIM_SYSCALL_1 (9	, ##a) */
+/* #define V850_SIM_SYS_unlink(a...)	V850_SIM_SYSCALL_1 (10	, ##a) */
+#define V850_SIM_SYS_execv(a...)	V850_SIM_SYSCALL_2 (11	, ##a)
+/* #define V850_SIM_SYS_chdir(a...)	V850_SIM_SYSCALL_1 (12	, ##a) */
+/* #define V850_SIM_SYS_mknod(a...)	V850_SIM_SYSCALL_1 (14	, ##a) */
+#define V850_SIM_SYS_chmod(a...)	V850_SIM_SYSCALL_2 (15	, ##a)
+#define V850_SIM_SYS_chown(a...)	V850_SIM_SYSCALL_2 (16	, ##a)
+#define V850_SIM_SYS_lseek(a...)	V850_SIM_SYSCALL_3 (19	, ##a)
+/* #define V850_SIM_SYS_getpid(a...)	V850_SIM_SYSCALL_1 (20	, ##a) */
+/* #define V850_SIM_SYS_isatty(a...)	V850_SIM_SYSCALL_1 (21	, ##a) */
+/* #define V850_SIM_SYS_fstat(a...)	V850_SIM_SYSCALL_1 (22	, ##a) */
+#define V850_SIM_SYS_time(a...)		V850_SIM_SYSCALL_1 (23	, ##a)
+#define V850_SIM_SYS_poll(a...)		V850_SIM_SYSCALL_3 (24	, ##a)
+#define V850_SIM_SYS_stat(a...)		V850_SIM_SYSCALL_2 (38	, ##a)
+#define V850_SIM_SYS_pipe(a...)		V850_SIM_SYSCALL_1 (42	, ##a)
+#define V850_SIM_SYS_times(a...)	V850_SIM_SYSCALL_1 (43	, ##a)
+#define V850_SIM_SYS_execve(a...)	V850_SIM_SYSCALL_3 (59	, ##a)
+#define V850_SIM_SYS_gettimeofday(a...)	V850_SIM_SYSCALL_2 (116	, ##a)
+/* #define V850_SIM_SYS_utime(a...)	V850_SIM_SYSCALL_2 (201	, ##a) */
+/* #define V850_SIM_SYS_wait(a...)	V850_SIM_SYSCALL_1 (202	, ##a) */
+
+#define V850_SIM_SYS_make_raw(a...)	V850_SIM_SYSCALL_1 (1024 , ##a)
+
+
+#define V850_SIM_SYSCALL_0(_call)					      \
+({									      \
+	register int call __asm__ ("r6") = _call;			      \
+	register int rval __asm__ ("r10");				      \
+	__asm__ __volatile__ ("trap 31"					      \
+			      : "=r" (rval)				      \
+			      : "r" (call)				      \
+			      : "r11", "memory");			      \
+	rval;								      \
+})
+#define V850_SIM_SYSCALL_1(_call, _arg0)				      \
+({									      \
+	register int call __asm__ ("r6") = _call;			      \
+	register long arg0 __asm__ ("r7") = (long)_arg0;		      \
+	register int rval __asm__ ("r10");				      \
+	__asm__ __volatile__ ("trap 31"					      \
+			      : "=r" (rval)				      \
+			      : "r" (call), "r" (arg0)			      \
+			      : "r11", "memory");			      \
+	rval;								      \
+})
+#define V850_SIM_SYSCALL_2(_call, _arg0, _arg1)				      \
+({									      \
+	register int call __asm__ ("r6") = _call;			      \
+	register long arg0 __asm__ ("r7") = (long)_arg0;		      \
+	register long arg1 __asm__ ("r8") = (long)_arg1;		      \
+	register int rval __asm__ ("r10");				      \
+	__asm__ __volatile__ ("trap 31"					      \
+			      : "=r" (rval)				      \
+			      : "r" (call), "r" (arg0), "r" (arg1)	      \
+			      : "r11", "memory");			      \
+	rval;								      \
+})
+#define V850_SIM_SYSCALL_3(_call, _arg0, _arg1, _arg2)			      \
+({									      \
+	register int call __asm__ ("r6") = _call;			      \
+	register long arg0 __asm__ ("r7") = (long)_arg0;		      \
+	register long arg1 __asm__ ("r8") = (long)_arg1;		      \
+	register long arg2 __asm__ ("r9") = (long)_arg2;		      \
+	register int rval __asm__ ("r10");				      \
+	__asm__ __volatile__ ("trap 31"					      \
+			      : "=r" (rval)				      \
+			      : "r" (call), "r" (arg0), "r" (arg1), "r" (arg2)\
+			      : "r11", "memory");			      \
+	rval;								      \
+})
+
+#define V850_SIM_SYSCALL(call, args...) \
+   V850_SIM_SYS_##call (args)
+
+#endif /* __V850_SIMSYSCALL_H__ */
diff --git a/include/asm-v850/socket.h b/include/asm-v850/socket.h
new file mode 100644
index 0000000..213b852
--- /dev/null
+++ b/include/asm-v850/socket.h
@@ -0,0 +1,50 @@
+#ifndef __V850_SOCKET_H__
+#define __V850_SOCKET_H__
+
+#include <asm/sockios.h>
+
+/* For setsockoptions(2) */
+#define SOL_SOCKET	1
+
+#define SO_DEBUG	1
+#define SO_REUSEADDR	2
+#define SO_TYPE		3
+#define SO_ERROR	4
+#define SO_DONTROUTE	5
+#define SO_BROADCAST	6
+#define SO_SNDBUF	7
+#define SO_RCVBUF	8
+#define SO_KEEPALIVE	9
+#define SO_OOBINLINE	10
+#define SO_NO_CHECK	11
+#define SO_PRIORITY	12
+#define SO_LINGER	13
+#define SO_BSDCOMPAT	14
+/* To add :#define SO_REUSEPORT 15 */
+#define SO_PASSCRED	16
+#define SO_PEERCRED	17
+#define SO_RCVLOWAT	18
+#define SO_SNDLOWAT	19
+#define SO_RCVTIMEO	20
+#define SO_SNDTIMEO	21
+
+/* Security levels - as per NRL IPv6 - don't actually do anything */
+#define SO_SECURITY_AUTHENTICATION		22
+#define SO_SECURITY_ENCRYPTION_TRANSPORT	23
+#define SO_SECURITY_ENCRYPTION_NETWORK		24
+
+#define SO_BINDTODEVICE	25
+
+/* Socket filtering */
+#define SO_ATTACH_FILTER        26
+#define SO_DETACH_FILTER        27
+
+#define SO_PEERNAME             28
+#define SO_TIMESTAMP		29
+#define SCM_TIMESTAMP		SO_TIMESTAMP
+
+#define SO_ACCEPTCONN		30
+
+#define SO_PEERSEC		31
+
+#endif /* __V850_SOCKET_H__ */
diff --git a/include/asm-v850/sockios.h b/include/asm-v850/sockios.h
new file mode 100644
index 0000000..cf4874c
--- /dev/null
+++ b/include/asm-v850/sockios.h
@@ -0,0 +1,12 @@
+#ifndef __V850_SOCKIOS_H__
+#define __V850_SOCKIOS_H__
+
+/* Socket-level I/O control calls. */
+#define FIOSETOWN 	0x8901
+#define SIOCSPGRP	0x8902
+#define FIOGETOWN	0x8903
+#define SIOCGPGRP	0x8904
+#define SIOCATMARK	0x8905
+#define SIOCGSTAMP	0x8906		/* Get stamp */
+
+#endif /* __V850_SOCKIOS_H__ */
diff --git a/include/asm-v850/stat.h b/include/asm-v850/stat.h
new file mode 100644
index 0000000..c68c60d
--- /dev/null
+++ b/include/asm-v850/stat.h
@@ -0,0 +1,73 @@
+/*
+ * include/asm-v850/stat.h -- v850 stat structure
+ *
+ *  Copyright (C) 2001,02,03  NEC Electronics Corporation
+ *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef __V850_STAT_H__
+#define __V850_STAT_H__
+
+#include <asm/posix_types.h>
+
+struct stat {
+	unsigned int	st_dev;
+	unsigned long	st_ino;
+	unsigned int	st_mode;
+	unsigned int	st_nlink;
+	unsigned int 	st_uid;
+	unsigned int 	st_gid;
+	unsigned int	st_rdev;
+	long		st_size;
+	unsigned long	st_blksize;
+	unsigned long	st_blocks;
+	unsigned long	st_atime;
+	unsigned long	__unused1;
+	unsigned long	st_mtime;
+	unsigned long	__unused2;
+	unsigned long	st_ctime;
+	unsigned long	__unused3;
+	unsigned long	__unused4;
+	unsigned long	__unused5;
+};
+
+struct stat64 {
+	unsigned long long	st_dev;
+	unsigned long	__unused1;
+
+	unsigned long long	st_ino;
+
+	unsigned int	st_mode;
+	unsigned int	st_nlink;
+
+	unsigned int	st_uid;
+	unsigned int	st_gid;
+
+	unsigned long long	st_rdev;
+	unsigned long	__unused3;
+
+	long long	st_size;
+	unsigned long	st_blksize;
+
+	unsigned long	st_blocks; /* No. of 512-byte blocks allocated */
+	unsigned long	__unused4; /* future possible st_blocks high bits */
+
+	unsigned long	st_atime;
+	unsigned long	st_atime_nsec;
+
+	unsigned long	st_mtime;
+	unsigned long	st_mtime_nsec;
+
+	unsigned long	st_ctime;
+	unsigned long	st_ctime_nsec;
+
+	unsigned long	__unused8;
+};
+
+#endif /* __V850_STAT_H__ */
diff --git a/include/asm-v850/statfs.h b/include/asm-v850/statfs.h
new file mode 100644
index 0000000..ea15966
--- /dev/null
+++ b/include/asm-v850/statfs.h
@@ -0,0 +1,6 @@
+#ifndef __V850_STATFS_H__
+#define __V850_STATFS_H__
+
+#include <asm-generic/statfs.h>
+
+#endif /* __V850_STATFS_H__ */
diff --git a/include/asm-v850/string.h b/include/asm-v850/string.h
new file mode 100644
index 0000000..478e234
--- /dev/null
+++ b/include/asm-v850/string.h
@@ -0,0 +1,25 @@
+/*
+ * include/asm-v850/string.h -- Architecture specific string routines
+ *
+ *  Copyright (C) 2001,02  NEC Corporation
+ *  Copyright (C) 2001,02  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef __V850_STRING_H__
+#define __V850_STRING_H__
+
+#define __HAVE_ARCH_MEMCPY
+#define __HAVE_ARCH_MEMSET
+#define __HAVE_ARCH_MEMMOVE
+
+extern void *memcpy (void *, const void *, __kernel_size_t);
+extern void *memset (void *, int, __kernel_size_t);
+extern void *memmove (void *, const void *, __kernel_size_t);
+
+#endif /* __V850_STRING_H__ */
diff --git a/include/asm-v850/system.h b/include/asm-v850/system.h
new file mode 100644
index 0000000..20f4c738
--- /dev/null
+++ b/include/asm-v850/system.h
@@ -0,0 +1,113 @@
+/*
+ * include/asm-v850/system.h -- Low-level interrupt/thread ops
+ *
+ *  Copyright (C) 2001,02,03  NEC Electronics Corporation
+ *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef __V850_SYSTEM_H__
+#define __V850_SYSTEM_H__
+
+#include <linux/linkage.h>
+#include <asm/ptrace.h>
+
+
+#define prepare_to_switch()	do { } while (0)
+
+/*
+ * switch_to(n) should switch tasks to task ptr, first checking that
+ * ptr isn't the current task, in which case it does nothing.
+ */
+struct thread_struct;
+extern void *switch_thread (struct thread_struct *last,
+			    struct thread_struct *next);
+#define switch_to(prev,next,last)					      \
+  do {									      \
+        if (prev != next) {						      \
+ 		(last) = switch_thread (&prev->thread, &next->thread);	      \
+	}								      \
+  } while (0)
+
+
+/* Enable/disable interrupts.  */
+#define local_irq_enable()	__asm__ __volatile__ ("ei")
+#define local_irq_disable()	__asm__ __volatile__ ("di")
+
+#define local_save_flags(flags) \
+  __asm__ __volatile__ ("stsr %1, %0" : "=r" (flags) : "i" (SR_PSW))
+#define local_restore_flags(flags) \
+  __asm__ __volatile__ ("ldsr %0, %1" :: "r" (flags), "i" (SR_PSW))
+
+/* For spinlocks etc */
+#define	local_irq_save(flags) \
+  do { local_save_flags (flags); local_irq_disable (); } while (0) 
+#define local_irq_restore(flags) \
+  local_restore_flags (flags);
+
+
+static inline int irqs_disabled (void)
+{
+	unsigned flags;
+	local_save_flags (flags);
+	return !!(flags & 0x20);
+}
+
+
+/*
+ * Force strict CPU ordering.
+ * Not really required on v850...
+ */
+#define nop()			__asm__ __volatile__ ("nop")
+#define mb()			__asm__ __volatile__ ("" ::: "memory")
+#define rmb()			mb ()
+#define wmb()			mb ()
+#define read_barrier_depends()	((void)0)
+#define set_rmb(var, value)	do { xchg (&var, value); } while (0)
+#define set_mb(var, value)	set_rmb (var, value)
+#define set_wmb(var, value)	do { var = value; wmb (); } while (0)
+
+#define smp_mb()	mb ()
+#define smp_rmb()	rmb ()
+#define smp_wmb()	wmb ()
+#define smp_read_barrier_depends()	read_barrier_depends()
+
+#define xchg(ptr, with) \
+  ((__typeof__ (*(ptr)))__xchg ((unsigned long)(with), (ptr), sizeof (*(ptr))))
+#define tas(ptr) (xchg ((ptr), 1))
+
+extern inline unsigned long __xchg (unsigned long with,
+				    __volatile__ void *ptr, int size)
+{
+	unsigned long tmp, flags;
+
+	local_irq_save (flags);
+
+	switch (size) {
+	case 1:
+		tmp = *(unsigned char *)ptr;
+		*(unsigned char *)ptr = with;
+		break;
+	case 2:
+		tmp = *(unsigned short *)ptr;
+		*(unsigned short *)ptr = with;
+		break;
+	case 4:
+		tmp = *(unsigned long *)ptr;
+		*(unsigned long *)ptr = with;
+		break;
+	}
+
+	local_irq_restore (flags);
+
+	return tmp;
+}
+
+#define arch_align_stack(x) (x)
+
+#endif /* __V850_SYSTEM_H__ */
diff --git a/include/asm-v850/teg.h b/include/asm-v850/teg.h
new file mode 100644
index 0000000..acc8c7d
--- /dev/null
+++ b/include/asm-v850/teg.h
@@ -0,0 +1,101 @@
+/*
+ * include/asm-v850/teg.h -- NB85E-TEG cpu chip
+ *
+ *  Copyright (C) 2001,02,03  NEC Electronics Corporation
+ *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef __V850_TEG_H__
+#define __V850_TEG_H__
+
+
+/* The TEG uses the V850E cpu core.  */
+#include <asm/v850e.h>
+#include <asm/v850e_cache.h>
+
+
+#define CPU_MODEL	"v850e/nb85e-teg"
+#define CPU_MODEL_LONG	"NEC V850E/NB85E TEG"
+
+
+/* For <asm/entry.h> */
+/* We use on-chip RAM, for a few miscellaneous variables that must be
+   accessible using a load instruction relative to R0.  On the NB85E/TEG,
+   There's 60KB of iRAM starting at 0xFFFF0000, however we need the base
+   address to be addressable by a 16-bit signed offset, so we only use the
+   second half of it starting from 0xFFFF8000.  */
+#define R0_RAM_ADDR			0xFFFF8000
+
+
+/* Hardware-specific interrupt numbers (in the kernel IRQ namespace).
+   Some of these are parameterized even though there's only a single
+   interrupt, for compatibility with some generic code that works on other
+   processor models.  */
+#define IRQ_INTCMD(n)	6	/* interval timer interrupt */
+#define IRQ_INTCMD_NUM	1
+#define IRQ_INTSER(n)	16	/* UART reception error */
+#define IRQ_INTSER_NUM	1
+#define IRQ_INTSR(n)	17	/* UART reception completion */
+#define IRQ_INTSR_NUM	1
+#define IRQ_INTST(n)	18	/* UART transmission completion */
+#define IRQ_INTST_NUM	1
+
+/* For <asm/irq.h> */
+#define NUM_CPU_IRQS	64
+
+
+/* TEG UART details.  */
+#define V850E_UART_BASE_ADDR(n)		(0xFFFFF600 + 0x10 * (n))
+#define V850E_UART_ASIM_ADDR(n)		(V850E_UART_BASE_ADDR(n) + 0x0)
+#define V850E_UART_ASIS_ADDR(n)		(V850E_UART_BASE_ADDR(n) + 0x2)
+#define V850E_UART_ASIF_ADDR(n)		(V850E_UART_BASE_ADDR(n) + 0x4)
+#define V850E_UART_CKSR_ADDR(n)		(V850E_UART_BASE_ADDR(n) + 0x6)
+#define V850E_UART_BRGC_ADDR(n)		(V850E_UART_BASE_ADDR(n) + 0x8)
+#define V850E_UART_TXB_ADDR(n)		(V850E_UART_BASE_ADDR(n) + 0xA)
+#define V850E_UART_RXB_ADDR(n)		(V850E_UART_BASE_ADDR(n) + 0xC)
+#define V850E_UART_NUM_CHANNELS		1
+#define V850E_UART_BASE_FREQ		CPU_CLOCK_FREQ
+/* This is a function that gets called before configuring the UART.  */
+#define V850E_UART_PRE_CONFIGURE	teg_uart_pre_configure
+#ifndef __ASSEMBLY__
+extern void teg_uart_pre_configure (unsigned chan,
+				    unsigned cflags, unsigned baud);
+#endif
+
+
+/* The TEG RTPU.  */
+#define V850E_RTPU_BASE_ADDR		0xFFFFF210
+
+
+/* TEG series timer D details.  */
+#define V850E_TIMER_D_BASE_ADDR		0xFFFFF210
+#define V850E_TIMER_D_TMCD_BASE_ADDR 	(V850E_TIMER_D_BASE_ADDR + 0x0)
+#define V850E_TIMER_D_TMD_BASE_ADDR 	(V850E_TIMER_D_BASE_ADDR + 0x4)
+#define V850E_TIMER_D_CMD_BASE_ADDR 	(V850E_TIMER_D_BASE_ADDR + 0x8)
+#define V850E_TIMER_D_BASE_FREQ		CPU_CLOCK_FREQ
+
+
+/* `Interrupt Source Select' control register.  */
+#define TEG_ISS_ADDR			0xFFFFF7FA
+#define TEG_ISS				(*(volatile u8 *)TEG_ISS_ADDR)
+
+/* Port 0 I/O register (bits 0-3 used).  */
+#define TEG_PORT0_IO_ADDR		0xFFFFF7F2
+#define TEG_PORT0_IO			(*(volatile u8 *)TEG_PORT0_IO_ADDR)
+/* Port 0 control register (bits 0-3 control mode, 0 = output, 1 = input).  */
+#define TEG_PORT0_PM_ADDR		0xFFFFF7F4
+#define TEG_PORT0_PM			(*(volatile u8 *)TEG_PORT0_PM_ADDR)
+
+
+#ifndef __ASSEMBLY__
+extern void teg_init_irqs (void);
+#endif
+
+
+#endif /* __V850_TEG_H__ */
diff --git a/include/asm-v850/termbits.h b/include/asm-v850/termbits.h
new file mode 100644
index 0000000..212d4e2
--- /dev/null
+++ b/include/asm-v850/termbits.h
@@ -0,0 +1,175 @@
+#ifndef __V850_TERMBITS_H__
+#define __V850_TERMBITS_H__
+
+#include <linux/posix_types.h>
+
+typedef unsigned char	cc_t;
+typedef unsigned int	speed_t;
+typedef unsigned int	tcflag_t;
+
+#define NCCS 19
+struct termios {
+	tcflag_t c_iflag;		/* input mode flags */
+	tcflag_t c_oflag;		/* output mode flags */
+	tcflag_t c_cflag;		/* control mode flags */
+	tcflag_t c_lflag;		/* local mode flags */
+	cc_t c_line;			/* line discipline */
+	cc_t c_cc[NCCS];		/* control characters */
+};
+
+/* c_cc characters */
+#define VINTR 0
+#define VQUIT 1
+#define VERASE 2
+#define VKILL 3
+#define VEOF 4
+#define VTIME 5
+#define VMIN 6
+#define VSWTC 7
+#define VSTART 8
+#define VSTOP 9
+#define VSUSP 10
+#define VEOL 11
+#define VREPRINT 12
+#define VDISCARD 13
+#define VWERASE 14
+#define VLNEXT 15
+#define VEOL2 16
+
+
+/* c_iflag bits */
+#define IGNBRK	0000001
+#define BRKINT	0000002
+#define IGNPAR	0000004
+#define PARMRK	0000010
+#define INPCK	0000020
+#define ISTRIP	0000040
+#define INLCR	0000100
+#define IGNCR	0000200
+#define ICRNL	0000400
+#define IUCLC	0001000
+#define IXON	0002000
+#define IXANY	0004000
+#define IXOFF	0010000
+#define IMAXBEL	0020000
+#define IUTF8	0040000
+
+/* c_oflag bits */
+#define OPOST	0000001
+#define OLCUC	0000002
+#define ONLCR	0000004
+#define OCRNL	0000010
+#define ONOCR	0000020
+#define ONLRET	0000040
+#define OFILL	0000100
+#define OFDEL	0000200
+#define NLDLY	0000400
+#define   NL0	0000000
+#define   NL1	0000400
+#define CRDLY	0003000
+#define   CR0	0000000
+#define   CR1	0001000
+#define   CR2	0002000
+#define   CR3	0003000
+#define TABDLY	0014000
+#define   TAB0	0000000
+#define   TAB1	0004000
+#define   TAB2	0010000
+#define   TAB3	0014000
+#define   XTABS	0014000
+#define BSDLY	0020000
+#define   BS0	0000000
+#define   BS1	0020000
+#define VTDLY	0040000
+#define   VT0	0000000
+#define   VT1	0040000
+#define FFDLY	0100000
+#define   FF0	0000000
+#define   FF1	0100000
+
+/* c_cflag bit meaning */
+#define CBAUD	0010017
+#define  B0	0000000		/* hang up */
+#define  B50	0000001
+#define  B75	0000002
+#define  B110	0000003
+#define  B134	0000004
+#define  B150	0000005
+#define  B200	0000006
+#define  B300	0000007
+#define  B600	0000010
+#define  B1200	0000011
+#define  B1800	0000012
+#define  B2400	0000013
+#define  B4800	0000014
+#define  B9600	0000015
+#define  B19200	0000016
+#define  B38400	0000017
+#define EXTA B19200
+#define EXTB B38400
+#define CSIZE	0000060
+#define   CS5	0000000
+#define   CS6	0000020
+#define   CS7	0000040
+#define   CS8	0000060
+#define CSTOPB	0000100
+#define CREAD	0000200
+#define PARENB	0000400
+#define PARODD	0001000
+#define HUPCL	0002000
+#define CLOCAL	0004000
+#define CBAUDEX 0010000
+#define    B57600 0010001
+#define   B115200 0010002
+#define   B230400 0010003
+#define   B460800 0010004
+#define   B500000 0010005
+#define   B576000 0010006
+#define   B921600 0010007
+#define  B1000000 0010010
+#define  B1152000 0010011
+#define  B1500000 0010012
+#define  B2000000 0010013
+#define  B2500000 0010014
+#define  B3000000 0010015
+#define  B3500000 0010016
+#define  B4000000 0010017
+#define CIBAUD	  002003600000	/* input baud rate (not used) */
+#define CMSPAR	  010000000000		/* mark or space (stick) parity */
+#define CRTSCTS	  020000000000		/* flow control */
+
+/* c_lflag bits */
+#define ISIG	0000001
+#define ICANON	0000002
+#define XCASE	0000004
+#define ECHO	0000010
+#define ECHOE	0000020
+#define ECHOK	0000040
+#define ECHONL	0000100
+#define NOFLSH	0000200
+#define TOSTOP	0000400
+#define ECHOCTL	0001000
+#define ECHOPRT	0002000
+#define ECHOKE	0004000
+#define FLUSHO	0010000
+#define PENDIN	0040000
+#define IEXTEN	0100000
+
+
+/* tcflow() and TCXONC use these */
+#define	TCOOFF		0
+#define	TCOON		1
+#define	TCIOFF		2
+#define	TCION		3
+
+/* tcflush() and TCFLSH use these */
+#define	TCIFLUSH	0
+#define	TCOFLUSH	1
+#define	TCIOFLUSH	2
+
+/* tcsetattr uses these */
+#define	TCSANOW		0
+#define	TCSADRAIN	1
+#define	TCSAFLUSH	2
+
+#endif /* __V850_TERMBITS_H__ */
diff --git a/include/asm-v850/termios.h b/include/asm-v850/termios.h
new file mode 100644
index 0000000..79e97b5
--- /dev/null
+++ b/include/asm-v850/termios.h
@@ -0,0 +1,106 @@
+#ifndef __V850_TERMIOS_H__
+#define __V850_TERMIOS_H__
+
+#include <asm/termbits.h>
+#include <asm/ioctls.h>
+
+struct winsize {
+	unsigned short ws_row;
+	unsigned short ws_col;
+	unsigned short ws_xpixel;
+	unsigned short ws_ypixel;
+};
+
+#define NCC 8
+struct termio {
+	unsigned short c_iflag;		/* input mode flags */
+	unsigned short c_oflag;		/* output mode flags */
+	unsigned short c_cflag;		/* control mode flags */
+	unsigned short c_lflag;		/* local mode flags */
+	unsigned char c_line;		/* line discipline */
+	unsigned char c_cc[NCC];	/* control characters */
+};
+
+/* modem lines */
+#define TIOCM_LE	0x001
+#define TIOCM_DTR	0x002
+#define TIOCM_RTS	0x004
+#define TIOCM_ST	0x008
+#define TIOCM_SR	0x010
+#define TIOCM_CTS	0x020
+#define TIOCM_CAR	0x040
+#define TIOCM_RNG	0x080
+#define TIOCM_DSR	0x100
+#define TIOCM_CD	TIOCM_CAR
+#define TIOCM_RI	TIOCM_RNG
+#define TIOCM_OUT1	0x2000
+#define TIOCM_OUT2	0x4000
+#define TIOCM_LOOP	0x8000
+
+/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */
+
+/* line disciplines */
+#define N_TTY		0
+#define N_SLIP		1
+#define N_MOUSE		2
+#define N_PPP		3
+#define N_STRIP		4
+#define N_AX25		5
+#define N_X25		6	/* X.25 async */
+#define N_6PACK		7
+#define N_MASC		8	/* Reserved for Mobitex module <kaz@cafe.net> */
+#define N_R3964		9	/* Reserved for Simatic R3964 module */
+#define N_PROFIBUS_FDL	10	/* Reserved for Profibus <Dave@mvhi.com> */
+#define N_IRDA		11	/* Linux IR - http://irda.sourceforge.net/ */
+#define N_SMSBLOCK	12	/* SMS block mode - for talking to GSM data cards about SMS messages */
+#define N_HDLC		13	/* synchronous HDLC */
+#define N_SYNC_PPP	14	/* synchronous PPP */
+#define N_HCI		15  /* Bluetooth HCI UART */
+
+#ifdef __KERNEL__
+
+/*	intr=^C		quit=^\		erase=del	kill=^U
+	eof=^D		vtime=\0	vmin=\1		sxtc=\0
+	start=^Q	stop=^S		susp=^Z		eol=\0
+	reprint=^R	discard=^U	werase=^W	lnext=^V
+	eol2=\0
+*/
+#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0"
+
+/*
+ * Translate a "termio" structure into a "termios". Ugh.
+ */
+#define SET_LOW_TERMIOS_BITS(termios, termio, x) { \
+	unsigned short __tmp; \
+	get_user(__tmp,&(termio)->x); \
+	*(unsigned short *) &(termios)->x = __tmp; \
+}
+
+#define user_termio_to_kernel_termios(termios, termio) \
+({ \
+	SET_LOW_TERMIOS_BITS(termios, termio, c_iflag); \
+	SET_LOW_TERMIOS_BITS(termios, termio, c_oflag); \
+	SET_LOW_TERMIOS_BITS(termios, termio, c_cflag); \
+	SET_LOW_TERMIOS_BITS(termios, termio, c_lflag); \
+	copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \
+})
+
+/*
+ * Translate a "termios" structure into a "termio". Ugh.
+ */
+#define kernel_termios_to_user_termio(termio, termios) \
+({ \
+	put_user((termios)->c_iflag, &(termio)->c_iflag); \
+	put_user((termios)->c_oflag, &(termio)->c_oflag); \
+	put_user((termios)->c_cflag, &(termio)->c_cflag); \
+	put_user((termios)->c_lflag, &(termio)->c_lflag); \
+	put_user((termios)->c_line,  &(termio)->c_line); \
+	copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \
+})
+
+#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios))
+#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios))
+
+#endif	/* __KERNEL__ */
+
+#endif	/* __V850_TERMIOS_H__ */
diff --git a/include/asm-v850/thread_info.h b/include/asm-v850/thread_info.h
new file mode 100644
index 0000000..e2ef445
--- /dev/null
+++ b/include/asm-v850/thread_info.h
@@ -0,0 +1,132 @@
+/*
+ * include/asm-v850/thread_info.h -- v850 low-level thread information
+ *
+ *  Copyright (C) 2002  NEC Corporation
+ *  Copyright (C) 2002  Miles Bader <miles@gnu.org>
+ *  Copyright (C) 2002  David Howells (dhowells@redhat.com)
+ *    - Incorporating suggestions made by Linus Torvalds and Dave Miller
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * This file was derived from the PPC version, include/asm-ppc/thread_info.h
+ * which was adapted from the i386 version by Paul Mackerras
+ */
+
+#ifndef __V850_THREAD_INFO_H__
+#define __V850_THREAD_INFO_H__
+
+#ifdef __KERNEL__
+
+#ifndef __ASSEMBLY__
+
+/*
+ * low level task data.
+ * If you change this, change the TI_* offsets below to match.
+ */
+struct thread_info {
+	struct task_struct	*task;		/* main task structure */
+	struct exec_domain	*exec_domain;	/* execution domain */
+	unsigned long		flags;		/* low level flags */
+	int			cpu;		/* cpu we're on */
+	int			preempt_count;
+	struct restart_block	restart_block;
+};
+
+#define INIT_THREAD_INFO(tsk)						      \
+{									      \
+	.task =		&tsk,						      \
+	.exec_domain =	&default_exec_domain,				      \
+	.flags =	0,						      \
+	.cpu =		0,						      \
+	.preempt_count = 1,						      \
+	.restart_block = {						      \
+		.fn = do_no_restart_syscall,				      \
+	},								      \
+}
+
+#define init_thread_info	(init_thread_union.thread_info)
+#define init_stack		(init_thread_union.stack)
+
+/*
+ * macros/functions for gaining access to the thread information structure
+ */
+
+/* thread information allocation */
+#define alloc_thread_info(tsk) ((struct thread_info *) \
+				__get_free_pages(GFP_KERNEL, 1))
+#define free_thread_info(ti)	free_pages((unsigned long) (ti), 1)
+#define get_thread_info(ti)	get_task_struct((ti)->task)
+#define put_thread_info(ti)	put_task_struct((ti)->task)
+
+#endif /* __ASSEMBLY__ */
+
+
+/*
+ * Offsets in thread_info structure, used in assembly code
+ */
+#define TI_TASK		0
+#define TI_EXECDOMAIN	4
+#define TI_FLAGS	8
+#define TI_CPU		12
+#define TI_PREEMPT	16
+
+#define PREEMPT_ACTIVE		0x4000000
+
+/*
+ * thread information flag bit numbers
+ */
+#define TIF_SYSCALL_TRACE	0	/* syscall trace active */
+#define TIF_NOTIFY_RESUME	1	/* resumption notification requested */
+#define TIF_SIGPENDING		2	/* signal pending */
+#define TIF_NEED_RESCHED	3	/* rescheduling necessary */
+#define TIF_POLLING_NRFLAG	4	/* true if poll_idle() is polling
+					   TIF_NEED_RESCHED */
+#define TIF_MEMDIE		5
+
+/* as above, but as bit values */
+#define _TIF_SYSCALL_TRACE	(1<<TIF_SYSCALL_TRACE)
+#define _TIF_NOTIFY_RESUME	(1<<TIF_NOTIFY_RESUME)
+#define _TIF_SIGPENDING		(1<<TIF_SIGPENDING)
+#define _TIF_NEED_RESCHED	(1<<TIF_NEED_RESCHED)
+#define _TIF_POLLING_NRFLAG	(1<<TIF_POLLING_NRFLAG)
+
+
+/* Size of kernel stack for each process.  */
+#define THREAD_SIZE		0x2000
+
+/* The alignment of kernel threads, with thread_info structures at their
+   base.  Thus, a pointer for a task's task structure can be derived from
+   its kernel stack pointer.  */
+#define THREAD_ALIGNMENT	THREAD_SIZE
+#define THREAD_MASK		(-THREAD_ALIGNMENT)
+
+
+#ifdef __ASSEMBLY__
+
+/* Put a pointer to the current thread_info structure into REG.  Note that
+   this definition requires THREAD_MASK to be representable as a signed
+   16-bit value.  */
+#define GET_CURRENT_THREAD(reg)						\
+        /* Use `addi' and then `and' instead of just `andi', because	\
+	   `addi' sign-extends the immediate value, whereas `andi'	\
+	   zero-extends it.  */						\
+	addi	THREAD_MASK, r0, reg;					\
+	and	sp, reg
+
+#else
+
+/* Return a pointer to the current thread_info structure.  */
+static inline struct thread_info *current_thread_info (void)
+{
+	register unsigned long sp __asm__ ("sp");
+	return (struct thread_info *)(sp & THREAD_MASK);
+}
+
+#endif /* __ASSEMBLY__ */
+
+
+#endif /* __KERNEL__ */
+
+#endif /* __V850_THREAD_INFO_H__ */
diff --git a/include/asm-v850/timex.h b/include/asm-v850/timex.h
new file mode 100644
index 0000000..6279e5a
--- /dev/null
+++ b/include/asm-v850/timex.h
@@ -0,0 +1,18 @@
+/*
+ * linux/include/asm-v850/timex.h
+ *
+ * v850 architecture timex specifications
+ */
+#ifndef __V850_TIMEX_H__
+#define __V850_TIMEX_H__
+
+#define CLOCK_TICK_RATE	1193180 /* Underlying HZ */
+
+typedef unsigned long cycles_t;
+
+static inline cycles_t get_cycles(void)
+{
+	return 0;
+}
+
+#endif /* __V850_TIMEX_H__ */
diff --git a/include/asm-v850/tlb.h b/include/asm-v850/tlb.h
new file mode 100644
index 0000000..73bc9ea
--- /dev/null
+++ b/include/asm-v850/tlb.h
@@ -0,0 +1,21 @@
+/*
+ * include/asm-v850/tlb.h
+ *
+ *  Copyright (C) 2002  NEC Corporation
+ *  Copyright (C) 2002  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef __V850_TLB_H__
+#define __V850_TLB_H__
+
+#define tlb_flush(tlb)	((void)0)
+
+#include <asm-generic/tlb.h>
+
+#endif /* __V850_TLB_H__ */
diff --git a/include/asm-v850/tlbflush.h b/include/asm-v850/tlbflush.h
new file mode 100644
index 0000000..501e449
--- /dev/null
+++ b/include/asm-v850/tlbflush.h
@@ -0,0 +1,70 @@
+/*
+ * include/asm-v850/tlbflush.h
+ *
+ *  Copyright (C) 2001,02,03  NEC Electronics Corporation
+ *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef __V850_TLBFLUSH_H__
+#define __V850_TLBFLUSH_H__
+
+#include <asm/machdep.h>
+
+
+/*
+ * flush all user-space atc entries.
+ */
+static inline void __flush_tlb(void)
+{
+	BUG ();
+}
+
+static inline void __flush_tlb_one(unsigned long addr)
+{
+	BUG ();
+}
+
+#define flush_tlb() __flush_tlb()
+
+/*
+ * flush all atc entries (both kernel and user-space entries).
+ */
+static inline void flush_tlb_all(void)
+{
+	BUG ();
+}
+
+static inline void flush_tlb_mm(struct mm_struct *mm)
+{
+	BUG ();
+}
+
+static inline void flush_tlb_page(struct vm_area_struct *vma, unsigned long addr)
+{
+	BUG ();
+}
+
+static inline void flush_tlb_range(struct vm_area_struct *vma,
+				   unsigned long start, unsigned long end)
+{
+	BUG ();
+}
+
+extern inline void flush_tlb_kernel_page(unsigned long addr)
+{
+	BUG ();
+}
+
+extern inline void flush_tlb_pgtables(struct mm_struct *mm,
+				      unsigned long start, unsigned long end)
+{
+	BUG ();
+}
+
+#endif /* __V850_TLBFLUSH_H__ */
diff --git a/include/asm-v850/topology.h b/include/asm-v850/topology.h
new file mode 100644
index 0000000..6040e41
--- /dev/null
+++ b/include/asm-v850/topology.h
@@ -0,0 +1,6 @@
+#ifndef __V850_TOPOLOGY_H__
+#define __V850_TOPOLOGY_H__
+
+#include <asm-generic/topology.h>
+
+#endif /* __V850_TOPOLOGY_H__ */
diff --git a/include/asm-v850/types.h b/include/asm-v850/types.h
new file mode 100644
index 0000000..e7cfe5b
--- /dev/null
+++ b/include/asm-v850/types.h
@@ -0,0 +1,68 @@
+#ifndef __V850_TYPES_H__
+#define __V850_TYPES_H__
+
+#ifndef __ASSEMBLY__
+
+/*
+ * This file is never included by application software unless
+ * explicitly requested (e.g., via linux/types.h) in which case the
+ * application is Linux specific so (user-) name space pollution is
+ * not a major issue.  However, for interoperability, libraries still
+ * need to be careful to avoid a name clashes.
+ */
+
+typedef unsigned short umode_t;
+
+/*
+ * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the
+ * header files exported to user space
+ */
+
+typedef __signed__ char __s8;
+typedef unsigned char __u8;
+
+typedef __signed__ short __s16;
+typedef unsigned short __u16;
+
+typedef __signed__ int __s32;
+typedef unsigned int __u32;
+
+#if defined(__GNUC__) && !defined(__STRICT_ANSI__)
+typedef __signed__ long long __s64;
+typedef unsigned long long __u64;
+#endif
+
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * These aren't exported outside the kernel to avoid name space clashes
+ */
+#ifdef __KERNEL__
+
+#define BITS_PER_LONG 32
+
+#ifndef __ASSEMBLY__
+
+typedef signed char s8;
+typedef unsigned char u8;
+
+typedef signed short s16;
+typedef unsigned short u16;
+
+typedef signed int s32;
+typedef unsigned int u32;
+
+typedef signed long long s64;
+typedef unsigned long long u64;
+
+/* Dma addresses are 32-bits wide.  */
+
+typedef u32 dma_addr_t;
+
+typedef unsigned int kmem_bufctl_t;
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* __KERNEL__ */
+
+#endif /* __V850_TYPES_H__ */
diff --git a/include/asm-v850/uaccess.h b/include/asm-v850/uaccess.h
new file mode 100644
index 0000000..4386cfc
--- /dev/null
+++ b/include/asm-v850/uaccess.h
@@ -0,0 +1,165 @@
+#ifndef __V850_UACCESS_H__
+#define __V850_UACCESS_H__
+
+/*
+ * User space memory access functions
+ */
+
+#include <linux/errno.h>
+#include <linux/string.h>
+
+#include <asm/segment.h>
+#include <asm/machdep.h>
+
+#define VERIFY_READ	0
+#define VERIFY_WRITE	1
+
+extern inline int access_ok (int type, const void *addr, unsigned long size)
+{
+	/* XXX I guess we should check against real ram bounds at least, and
+	   possibly make sure ADDR is not within the kernel.
+	   For now we just check to make sure it's not a small positive
+	   or negative value, as that will at least catch some kinds of
+	   error.  In particular, we make sure that ADDR's not within the
+	   interrupt vector area, which we know starts at zero, or within the
+	   peripheral-I/O area, which is located just _before_ zero.  */
+	unsigned long val = (unsigned long)addr;
+	return val >= (0x80 + NUM_CPU_IRQS*16) && val < 0xFFFFF000;
+}
+
+/* this function will go away soon - use access_ok() instead */
+extern inline int __deprecated verify_area (int type, const void *addr, unsigned long size)
+{
+	return access_ok (type, addr, size) ? 0 : -EFAULT;
+}
+
+/*
+ * The exception table consists of pairs of addresses: the first is the
+ * address of an instruction that is allowed to fault, and the second is
+ * the address at which the program should continue.  No registers are
+ * modified, so it is entirely up to the continuation code to figure out
+ * what to do.
+ *
+ * All the routines below use bits of fixup code that are out of line
+ * with the main instruction path.  This means when everything is well,
+ * we don't even have to jump over them.  Further, they do not intrude
+ * on our cache or tlb entries.
+ */
+
+struct exception_table_entry
+{
+	unsigned long insn, fixup;
+};
+
+/* Returns 0 if exception not found and fixup otherwise.  */
+extern unsigned long search_exception_table (unsigned long);
+
+
+/*
+ * These are the main single-value transfer routines.  They automatically
+ * use the right size if we just have the right pointer type.
+ */
+
+extern int bad_user_access_length (void);
+
+#define __get_user(var, ptr)						      \
+  ({									      \
+	  int __gu_err = 0;						      \
+	  typeof(*(ptr)) __gu_val = 0;					      \
+	  switch (sizeof (*(ptr))) {					      \
+	  case 1:							      \
+	  case 2:							      \
+	  case 4:							      \
+		  __gu_val = *(ptr);					      \
+		  break;						      \
+	  case 8:							      \
+		  memcpy(&__gu_val, ptr, sizeof(__gu_val));		      \
+		  break;						      \
+	  default:							      \
+		  __gu_val = 0;						      \
+		  __gu_err = __get_user_bad ();				      \
+		  break;						      \
+	  }								      \
+	  (var) = __gu_val;						      \
+	  __gu_err;							      \
+  })
+#define __get_user_bad()	(bad_user_access_length (), (-EFAULT))
+
+#define __put_user(var, ptr)						      \
+  ({									      \
+	  int __pu_err = 0;						      \
+	  switch (sizeof (*(ptr))) {					      \
+	  case 1:							      \
+	  case 2:							      \
+	  case 4:							      \
+		  *(ptr) = (var);					      \
+		  break;						      \
+	  case 8: {							      \
+	  	  typeof(*(ptr)) __pu_val = 0;				      \
+		  memcpy(ptr, &__pu_val, sizeof(__pu_val));		      \
+		  }							      \
+		  break;						      \
+	  default:							      \
+		  __pu_err = __put_user_bad ();				      \
+		  break;						      \
+	  }								      \
+	  __pu_err;							      \
+  })
+#define __put_user_bad()	(bad_user_access_length (), (-EFAULT))
+
+#define put_user(x, ptr)	__put_user(x, ptr)
+#define get_user(x, ptr)	__get_user(x, ptr)
+
+#define __copy_from_user(to, from, n)	(memcpy (to, from, n), 0)
+#define __copy_to_user(to, from, n)	(memcpy(to, from, n), 0)
+
+#define __copy_to_user_inatomic __copy_to_user
+#define __copy_from_user_inatomic __copy_from_user
+
+#define copy_from_user(to, from, n)	__copy_from_user (to, from, n)
+#define copy_to_user(to, from, n) 	__copy_to_user(to, from, n)
+
+#define copy_to_user_ret(to,from,n,retval) \
+  ({ if (copy_to_user (to,from,n)) return retval; })
+
+#define copy_from_user_ret(to,from,n,retval) \
+  ({ if (copy_from_user (to,from,n)) return retval; })
+
+/*
+ * Copy a null terminated string from userspace.
+ */
+
+static inline long
+strncpy_from_user (char *dst, const char *src, long count)
+{
+	char *tmp;
+	strncpy (dst, src, count);
+	for (tmp = dst; *tmp && count > 0; tmp++, count--)
+		;
+	return tmp - dst;
+}
+
+/*
+ * Return the size of a string (including the ending 0)
+ *
+ * Return 0 on exception, a value greater than N if too long
+ */
+static inline long strnlen_user (const char *src, long n)
+{
+	return strlen (src) + 1;
+}
+
+#define strlen_user(str)	strnlen_user (str, 32767)
+
+/*
+ * Zero Userspace
+ */
+
+static inline unsigned long
+clear_user (void *to, unsigned long n)
+{
+	memset (to, 0, n);
+	return 0;
+}
+
+#endif /* __V850_UACCESS_H__ */
diff --git a/include/asm-v850/ucontext.h b/include/asm-v850/ucontext.h
new file mode 100644
index 0000000..303c215
--- /dev/null
+++ b/include/asm-v850/ucontext.h
@@ -0,0 +1,14 @@
+#ifndef __V850_UCONTEXT_H__
+#define __V850_UCONTEXT_H__
+
+#include <asm/sigcontext.h>
+
+struct ucontext {
+	unsigned long	  uc_flags;
+	struct ucontext  *uc_link;
+	stack_t		  uc_stack;
+	struct sigcontext uc_mcontext;
+	sigset_t	  uc_sigmask;	/* mask last for extensibility */
+};
+
+#endif /* __V850_UCONTEXT_H__ */
diff --git a/include/asm-v850/unaligned.h b/include/asm-v850/unaligned.h
new file mode 100644
index 0000000..65e3836
--- /dev/null
+++ b/include/asm-v850/unaligned.h
@@ -0,0 +1,130 @@
+/*
+ * include/asm-v850/unaligned.h -- Unaligned memory access
+ *
+ *  Copyright (C) 2001  NEC Corporation
+ *  Copyright (C) 2001  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * This file is a copy of the arm version, include/asm-arm/unaligned.h
+ *
+ * Note that some v850 chips support unaligned access, but it seems too
+ * annoying to use.
+ */
+
+#ifndef __V850_UNALIGNED_H__
+#define __V850_UNALIGNED_H__
+
+#include <asm/types.h>
+
+extern int __bug_unaligned_x(void *ptr);
+
+/*
+ * What is the most efficient way of loading/storing an unaligned value?
+ *
+ * That is the subject of this file.  Efficiency here is defined as
+ * minimum code size with minimum register usage for the common cases.
+ * It is currently not believed that long longs are common, so we
+ * trade efficiency for the chars, shorts and longs against the long
+ * longs.
+ *
+ * Current stats with gcc 2.7.2.2 for these functions:
+ *
+ *	ptrsize	get:	code	regs	put:	code	regs
+ *	1		1	1		1	2
+ *	2		3	2		3	2
+ *	4		7	3		7	3
+ *	8		20	6		16	6
+ *
+ * gcc 2.95.1 seems to code differently:
+ *
+ *	ptrsize	get:	code	regs	put:	code	regs
+ *	1		1	1		1	2
+ *	2		3	2		3	2
+ *	4		7	4		7	4
+ *	8		19	8		15	6
+ *
+ * which may or may not be more efficient (depending upon whether
+ * you can afford the extra registers).  Hopefully the gcc 2.95
+ * is inteligent enough to decide if it is better to use the
+ * extra register, but evidence so far seems to suggest otherwise.
+ *
+ * Unfortunately, gcc is not able to optimise the high word
+ * out of long long >> 32, or the low word from long long << 32
+ */
+
+#define __get_unaligned_2(__p)					\
+	(__p[0] | __p[1] << 8)
+
+#define __get_unaligned_4(__p)					\
+	(__p[0] | __p[1] << 8 | __p[2] << 16 | __p[3] << 24)
+
+#define get_unaligned(ptr)					\
+	({							\
+		__typeof__(*(ptr)) __v;				\
+		__u8 *__p = (__u8 *)(ptr);			\
+		switch (sizeof(*(ptr))) {			\
+		case 1:	__v = *(ptr);			break;	\
+		case 2: __v = __get_unaligned_2(__p);	break;	\
+		case 4: __v = __get_unaligned_4(__p);	break;	\
+		case 8: {					\
+				unsigned int __v1, __v2;	\
+				__v2 = __get_unaligned_4((__p+4)); \
+				__v1 = __get_unaligned_4(__p);	\
+				__v = ((unsigned long long)__v2 << 32 | __v1);	\
+			}					\
+			break;					\
+		default: __v = __bug_unaligned_x(__p);	break;	\
+		}						\
+		__v;						\
+	})
+
+
+extern inline void __put_unaligned_2(__u32 __v, register __u8 *__p)
+{
+	*__p++ = __v;
+	*__p++ = __v >> 8;
+}
+
+extern inline void __put_unaligned_4(__u32 __v, register __u8 *__p)
+{
+	__put_unaligned_2(__v >> 16, __p + 2);
+	__put_unaligned_2(__v, __p);
+}
+
+extern inline void __put_unaligned_8(const unsigned long long __v, register __u8 *__p)
+{
+	/*
+	 * tradeoff: 8 bytes of stack for all unaligned puts (2
+	 * instructions), or an extra register in the long long
+	 * case - go for the extra register.
+	 */
+	__put_unaligned_4(__v >> 32, __p+4);
+	__put_unaligned_4(__v, __p);
+}
+
+/*
+ * Try to store an unaligned value as efficiently as possible.
+ */
+#define put_unaligned(val,ptr)					\
+	({							\
+		switch (sizeof(*(ptr))) {			\
+		case 1:						\
+			*(ptr) = (val);				\
+			break;					\
+		case 2: __put_unaligned_2((val),(__u8 *)(ptr));	\
+			break;					\
+		case 4:	__put_unaligned_4((val),(__u8 *)(ptr));	\
+			break;					\
+		case 8:	__put_unaligned_8((val),(__u8 *)(ptr)); \
+			break;					\
+		default: __bug_unaligned_x(ptr);		\
+			break;					\
+		}						\
+		(void) 0;					\
+	})
+
+
+#endif /* __V850_UNALIGNED_H__ */
diff --git a/include/asm-v850/unistd.h b/include/asm-v850/unistd.h
new file mode 100644
index 0000000..3b55209
--- /dev/null
+++ b/include/asm-v850/unistd.h
@@ -0,0 +1,477 @@
+/*
+ * include/asm-v850/unistd.h -- System call numbers and invocation mechanism
+ *
+ *  Copyright (C) 2001,02,03,04  NEC Electronics Corporation
+ *  Copyright (C) 2001,02,03,04  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef __V850_UNISTD_H__
+#define __V850_UNISTD_H__
+
+#include <asm/clinkage.h>
+
+#define __NR_restart_syscall	  0
+#define __NR_exit		  1
+#define __NR_fork		  2
+#define __NR_read		  3
+#define __NR_write		  4
+#define __NR_open		  5
+#define __NR_close		  6
+#define __NR_waitpid		  7
+#define __NR_creat		  8
+#define __NR_link		  9
+#define __NR_unlink		 10
+#define __NR_execve		 11
+#define __NR_chdir		 12
+#define __NR_time		 13
+#define __NR_mknod		 14
+#define __NR_chmod		 15
+#define __NR_chown		 16
+#define __NR_break		 17
+#define __NR_lseek		 19
+#define __NR_getpid		 20
+#define __NR_mount		 21
+#define __NR_umount		 22
+#define __NR_setuid		 23
+#define __NR_getuid		 24
+#define __NR_stime		 25
+#define __NR_ptrace		 26
+#define __NR_alarm		 27
+#define __NR_pause		 29
+#define __NR_utime		 30
+#define __NR_stty		 31
+#define __NR_gtty		 32
+#define __NR_access		 33
+#define __NR_nice		 34
+#define __NR_ftime		 35
+#define __NR_sync		 36
+#define __NR_kill		 37
+#define __NR_rename		 38
+#define __NR_mkdir		 39
+#define __NR_rmdir		 40
+#define __NR_dup		 41
+#define __NR_pipe		 42
+#define __NR_times		 43
+#define __NR_prof		 44
+#define __NR_brk		 45
+#define __NR_setgid		 46
+#define __NR_getgid		 47
+#define __NR_signal		 48
+#define __NR_geteuid		 49
+#define __NR_getegid		 50
+#define __NR_acct		 51
+#define __NR_umount2		 52
+#define __NR_lock		 53
+#define __NR_ioctl		 54
+#define __NR_fcntl		 55
+#define __NR_setpgid		 57
+#define __NR_umask		 60
+#define __NR_chroot		 61
+#define __NR_ustat		 62
+#define __NR_dup2		 63
+#define __NR_getppid		 64
+#define __NR_getpgrp		 65
+#define __NR_setsid		 66
+#define __NR_sigaction		 67
+#define __NR_sgetmask		 68
+#define __NR_ssetmask		 69
+#define __NR_setreuid		 70
+#define __NR_setregid		 71
+#define __NR_sigsuspend		 72
+#define __NR_sigpending		 73
+#define __NR_sethostname	 74
+#define __NR_setrlimit		 75
+#define __NR_ugetrlimit	 	 76
+#define __NR_getrusage		 77
+#define __NR_gettimeofday	 78
+#define __NR_settimeofday	 79
+#define __NR_getgroups		 80
+#define __NR_setgroups		 81
+#define __NR_select		 82
+#define __NR_symlink		 83
+#define __NR_readlink		 85
+#define __NR_uselib		 86
+#define __NR_swapon		 87
+#define __NR_reboot		 88
+#define __NR_readdir		 89
+#define __NR_mmap		 90
+#define __NR_munmap		 91
+#define __NR_truncate		 92
+#define __NR_ftruncate		 93
+#define __NR_fchmod		 94
+#define __NR_fchown		 95
+#define __NR_getpriority	 96
+#define __NR_setpriority	 97
+#define __NR_profil		 98
+#define __NR_statfs		 99
+#define __NR_fstatfs		100
+#define __NR_socketcall		102
+#define __NR_syslog		103
+#define __NR_setitimer		104
+#define __NR_getitimer		105
+#define __NR_stat		106
+#define __NR_lstat		107
+#define __NR_fstat		108
+#define __NR_vhangup		111
+#define __NR_wait4		114
+#define __NR_swapoff		115
+#define __NR_sysinfo		116
+#define __NR_ipc		117
+#define __NR_fsync		118
+#define __NR_sigreturn		119
+#define __NR_clone		120
+#define __NR_setdomainname	121
+#define __NR_uname		122
+#define __NR_cacheflush		123
+#define __NR_adjtimex		124
+#define __NR_mprotect		125
+#define __NR_sigprocmask	126
+#define __NR_create_module	127
+#define __NR_init_module	128
+#define __NR_delete_module	129
+#define __NR_get_kernel_syms	130
+#define __NR_quotactl		131
+#define __NR_getpgid		132
+#define __NR_fchdir		133
+#define __NR_bdflush		134
+#define __NR_sysfs		135
+#define __NR_personality	136
+#define __NR_afs_syscall	137 /* Syscall for Andrew File System */
+#define __NR_setfsuid		138
+#define __NR_setfsgid		139
+#define __NR__llseek		140
+#define __NR_getdents		141
+#define __NR_flock		143
+#define __NR_msync		144
+#define __NR_readv		145
+#define __NR_writev		146
+#define __NR_getsid		147
+#define __NR_fdatasync		148
+#define __NR__sysctl		149
+#define __NR_mlock		150
+#define __NR_munlock		151
+#define __NR_mlockall		152
+#define __NR_munlockall		153
+#define __NR_sched_setparam		154
+#define __NR_sched_getparam		155
+#define __NR_sched_setscheduler		156
+#define __NR_sched_getscheduler		157
+#define __NR_sched_yield		158
+#define __NR_sched_get_priority_max	159
+#define __NR_sched_get_priority_min	160
+#define __NR_sched_rr_get_interval	161
+#define __NR_nanosleep		162
+#define __NR_mremap		163
+#define __NR_setresuid		164
+#define __NR_getresuid		165
+#define __NR_query_module	167
+#define __NR_poll		168
+#define __NR_nfsservctl		169
+#define __NR_setresgid		170
+#define __NR_getresgid		171
+#define __NR_prctl		172
+#define __NR_rt_sigreturn	173
+#define __NR_rt_sigaction	174
+#define __NR_rt_sigprocmask	175
+#define __NR_rt_sigpending	176
+#define __NR_rt_sigtimedwait	177
+#define __NR_rt_sigqueueinfo	178
+#define __NR_rt_sigsuspend	179
+#define __NR_pread		180
+#define __NR_pwrite		181
+#define __NR_lchown		182
+#define __NR_getcwd		183
+#define __NR_capget		184
+#define __NR_capset		185
+#define __NR_sigaltstack	186
+#define __NR_sendfile		187
+#define __NR_getpmsg		188	/* some people actually want streams */
+#define __NR_putpmsg		189	/* some people actually want streams */
+#define __NR_vfork		190
+#define __NR_mmap2		192
+#define __NR_truncate64		193
+#define __NR_ftruncate64	194
+#define __NR_stat64		195
+#define __NR_lstat64		196
+#define __NR_fstat64		197
+#define __NR_fcntl64		198
+#define __NR_getdents64		199
+#define __NR_pivot_root		200
+#define __NR_gettid		201
+#define __NR_tkill		202
+
+
+/* Syscall protocol:
+   Syscall number in r12, args in r6-r9, r13-r14
+   Return value in r10
+   Trap 0 for `short' syscalls, where all the args can fit in function
+   call argument registers, and trap 1 when there are additional args in
+   r13-r14.  */
+
+#define SYSCALL_NUM	"r12"
+#define SYSCALL_ARG0	"r6"
+#define SYSCALL_ARG1	"r7"
+#define SYSCALL_ARG2	"r8"
+#define SYSCALL_ARG3	"r9"
+#define SYSCALL_ARG4	"r13"
+#define SYSCALL_ARG5	"r14"
+#define SYSCALL_RET	"r10"
+
+#define SYSCALL_SHORT_TRAP	"0"
+#define SYSCALL_LONG_TRAP	"1"
+
+/* Registers clobbered by any syscall.  This _doesn't_ include the syscall
+   number (r12) or the `extended arg' registers (r13, r14), even though
+   they are actually clobbered too (this is because gcc's `asm' statement
+   doesn't allow a clobber to be used as an input or output).  */
+#define SYSCALL_CLOBBERS	"r1", "r5", "r11", "r15", "r16", \
+				"r17", "r18", "r19"
+
+/* Registers clobbered by a `short' syscall.  This includes all clobbers
+   except the syscall number (r12).  */
+#define SYSCALL_SHORT_CLOBBERS	SYSCALL_CLOBBERS, "r13", "r14"
+
+
+/* User programs sometimes end up including this header file
+   (indirectly, via uClibc header files), so I'm a bit nervous just
+   including <linux/compiler.h>.  */
+#if !defined(__builtin_expect) && __GNUC__ == 2 && __GNUC_MINOR__ < 96
+#define __builtin_expect(x, expected_value) (x)
+#endif
+
+#define __syscall_return(type, res)					      \
+  do {									      \
+	  /* user-visible error numbers are in the range -1 - -124:	      \
+	     see <asm-v850/errno.h> */					      \
+	  if (__builtin_expect ((unsigned long)(res) >= (unsigned long)(-125), 0)) { \
+		  errno = -(res);					      \
+		  res = -1;						      \
+	  }								      \
+	  return (type) (res);						      \
+  } while (0)
+
+
+#define _syscall0(type, name)						      \
+type name (void)							      \
+{									      \
+  register unsigned long __syscall __asm__ (SYSCALL_NUM) = __NR_##name;	      \
+  register unsigned long __ret __asm__ (SYSCALL_RET);			      \
+  __asm__ __volatile__ ("trap " SYSCALL_SHORT_TRAP			      \
+			: "=r" (__ret), "=r" (__syscall)	 	      \
+			: "1" (__syscall)				      \
+			: SYSCALL_SHORT_CLOBBERS);			      \
+  __syscall_return (type, __ret);					      \
+}
+
+#define _syscall1(type, name, atype, a)					      \
+type name (atype a)							      \
+{									      \
+  register atype __a __asm__ (SYSCALL_ARG0) = a;			      \
+  register unsigned long __syscall __asm__ (SYSCALL_NUM) = __NR_##name;	      \
+  register unsigned long __ret __asm__ (SYSCALL_RET);			      \
+  __asm__ __volatile__ ("trap " SYSCALL_SHORT_TRAP			      \
+			: "=r" (__ret), "=r" (__syscall)		      \
+			: "1" (__syscall), "r" (__a)			      \
+			: SYSCALL_SHORT_CLOBBERS);			      \
+  __syscall_return (type, __ret);					      \
+}
+
+#define _syscall2(type, name, atype, a, btype, b)			      \
+type name (atype a, btype b)						      \
+{									      \
+  register atype __a __asm__ (SYSCALL_ARG0) = a;			      \
+  register btype __b __asm__ (SYSCALL_ARG1) = b;			      \
+  register unsigned long __syscall __asm__ (SYSCALL_NUM) = __NR_##name;	      \
+  register unsigned long __ret __asm__ (SYSCALL_RET);			      \
+  __asm__ __volatile__ ("trap " SYSCALL_SHORT_TRAP			      \
+			: "=r" (__ret), "=r" (__syscall)		      \
+			: "1" (__syscall), "r" (__a), "r" (__b)		      \
+			: SYSCALL_SHORT_CLOBBERS);			      \
+  __syscall_return (type, __ret);					      \
+}
+
+#define _syscall3(type, name, atype, a, btype, b, ctype, c)		      \
+type name (atype a, btype b, ctype c)					      \
+{									      \
+  register atype __a __asm__ (SYSCALL_ARG0) = a;			      \
+  register btype __b __asm__ (SYSCALL_ARG1) = b;			      \
+  register ctype __c __asm__ (SYSCALL_ARG2) = c;			      \
+  register unsigned long __syscall __asm__ (SYSCALL_NUM) = __NR_##name;	      \
+  register unsigned long __ret __asm__ (SYSCALL_RET);			      \
+  __asm__ __volatile__ ("trap " SYSCALL_SHORT_TRAP			      \
+			: "=r" (__ret), "=r" (__syscall)		      \
+			: "1" (__syscall), "r" (__a), "r" (__b), "r" (__c)    \
+			: SYSCALL_SHORT_CLOBBERS);			      \
+  __syscall_return (type, __ret);					      \
+}
+
+#define _syscall4(type, name, atype, a, btype, b, ctype, c, dtype, d)	      \
+type name (atype a, btype b, ctype c, dtype d)				      \
+{									      \
+  register atype __a __asm__ (SYSCALL_ARG0) = a;			      \
+  register btype __b __asm__ (SYSCALL_ARG1) = b;			      \
+  register ctype __c __asm__ (SYSCALL_ARG2) = c;			      \
+  register dtype __d __asm__ (SYSCALL_ARG3) = d;			      \
+  register unsigned long __syscall __asm__ (SYSCALL_NUM) = __NR_##name;	      \
+  register unsigned long __ret __asm__ (SYSCALL_RET);			      \
+  __asm__ __volatile__ ("trap " SYSCALL_SHORT_TRAP			      \
+			: "=r" (__ret), "=r" (__syscall)		      \
+			: "1" (__syscall),				      \
+			"r" (__a), "r" (__b), "r" (__c), "r" (__d)	      \
+			: SYSCALL_SHORT_CLOBBERS);			      \
+  __syscall_return (type, __ret);					      \
+}
+
+#define _syscall5(type, name, atype, a, btype, b, ctype, c, dtype, d, etype,e)\
+type name (atype a, btype b, ctype c, dtype d, etype e)			      \
+{									      \
+  register atype __a __asm__ (SYSCALL_ARG0) = a;			      \
+  register btype __b __asm__ (SYSCALL_ARG1) = b;			      \
+  register ctype __c __asm__ (SYSCALL_ARG2) = c;			      \
+  register dtype __d __asm__ (SYSCALL_ARG3) = d;			      \
+  register etype __e __asm__ (SYSCALL_ARG4) = e;			      \
+  register unsigned long __syscall __asm__ (SYSCALL_NUM) = __NR_##name;	      \
+  register unsigned long __ret __asm__ (SYSCALL_RET);			      \
+  __asm__ __volatile__ ("trap " SYSCALL_LONG_TRAP			      \
+			: "=r" (__ret), "=r" (__syscall), "=r" (__e)	      \
+			: "1" (__syscall),				      \
+			"r" (__a), "r" (__b), "r" (__c), "r" (__d), "2" (__e) \
+			: SYSCALL_CLOBBERS);				      \
+  __syscall_return (type, __ret);					      \
+}
+
+#if __GNUC__ < 3
+/* In older versions of gcc, `asm' statements with more than 10
+   input/output arguments produce a fatal error.  To work around this
+   problem, we use two versions, one for gcc-3.x and one for earlier
+   versions of gcc (the `earlier gcc' version doesn't work with gcc-3.x
+   because gcc-3.x doesn't allow clobbers to also be input arguments).  */
+#define __SYSCALL6_TRAP(syscall, ret, a, b, c, d, e, f)			      \
+  __asm__ __volatile__ ("trap " SYSCALL_LONG_TRAP			      \
+			: "=r" (ret), "=r" (syscall)			      \
+			: "1" (syscall),				      \
+			"r" (a), "r" (b), "r" (c), "r" (d),		      \
+ 			"r" (e), "r" (f)				      \
+			: SYSCALL_CLOBBERS, SYSCALL_ARG4, SYSCALL_ARG5);
+#else /* __GNUC__ >= 3 */
+#define __SYSCALL6_TRAP(syscall, ret, a, b, c, d, e, f)			      \
+  __asm__ __volatile__ ("trap " SYSCALL_LONG_TRAP			      \
+			: "=r" (ret), "=r" (syscall),			      \
+ 			"=r" (e), "=r" (f)				      \
+			: "1" (syscall),				      \
+			"r" (a), "r" (b), "r" (c), "r" (d),		      \
+			"2" (e), "3" (f)				      \
+			: SYSCALL_CLOBBERS);
+#endif
+
+#define _syscall6(type, name, atype, a, btype, b, ctype, c, dtype, d, etype, e, ftype, f) \
+type name (atype a, btype b, ctype c, dtype d, etype e, ftype f)	      \
+{									      \
+  register atype __a __asm__ (SYSCALL_ARG0) = a;			      \
+  register btype __b __asm__ (SYSCALL_ARG1) = b;			      \
+  register ctype __c __asm__ (SYSCALL_ARG2) = c;			      \
+  register dtype __d __asm__ (SYSCALL_ARG3) = d;			      \
+  register etype __e __asm__ (SYSCALL_ARG4) = e;			      \
+  register etype __f __asm__ (SYSCALL_ARG5) = f;			      \
+  register unsigned long __syscall __asm__ (SYSCALL_NUM) = __NR_##name;	      \
+  register unsigned long __ret __asm__ (SYSCALL_RET);			      \
+  __SYSCALL6_TRAP(__syscall, __ret, __a, __b, __c, __d, __e, __f);	      \
+  __syscall_return (type, __ret);					      \
+}
+		
+
+#ifdef __KERNEL__
+#define __ARCH_WANT_IPC_PARSE_VERSION
+#define __ARCH_WANT_OLD_READDIR
+#define __ARCH_WANT_STAT64
+#define __ARCH_WANT_SYS_ALARM
+#define __ARCH_WANT_SYS_GETHOSTNAME
+#define __ARCH_WANT_SYS_PAUSE
+#define __ARCH_WANT_SYS_SGETMASK
+#define __ARCH_WANT_SYS_SIGNAL
+#define __ARCH_WANT_SYS_TIME
+#define __ARCH_WANT_SYS_UTIME
+#define __ARCH_WANT_SYS_WAITPID
+#define __ARCH_WANT_SYS_SOCKETCALL
+#define __ARCH_WANT_SYS_FADVISE64
+#define __ARCH_WANT_SYS_GETPGRP
+#define __ARCH_WANT_SYS_LLSEEK
+#define __ARCH_WANT_SYS_NICE
+#define __ARCH_WANT_SYS_OLDUMOUNT
+#define __ARCH_WANT_SYS_SIGPENDING
+#define __ARCH_WANT_SYS_SIGPROCMASK
+#define __ARCH_WANT_SYS_RT_SIGACTION
+#endif
+
+#ifdef __KERNEL_SYSCALLS__
+
+#include <linux/compiler.h>
+#include <linux/types.h>
+
+/*
+ * we need this inline - forking from kernel space will result
+ * in NO COPY ON WRITE (!!!), until an execve is executed. This
+ * is no problem, but for the stack. This is handled by not letting
+ * main() use the stack at all after fork(). Thus, no function
+ * calls - which means inline code for fork too, as otherwise we
+ * would use the stack upon exit from 'fork()'.
+ *
+ * Actually only pause and fork are needed inline, so that there
+ * won't be any messing with the stack from main(), but we define
+ * some others too.
+ */
+#define __NR__exit __NR_exit
+extern inline _syscall0(pid_t,setsid)
+extern inline _syscall3(int,write,int,fd,const char *,buf,off_t,count)
+extern inline _syscall3(int,read,int,fd,char *,buf,off_t,count)
+extern inline _syscall3(off_t,lseek,int,fd,off_t,offset,int,count)
+extern inline _syscall1(int,dup,int,fd)
+extern inline _syscall3(int,execve,const char *,file,char **,argv,char **,envp)
+extern inline _syscall3(int,open,const char *,file,int,flag,int,mode)
+extern inline _syscall1(int,close,int,fd)
+extern inline _syscall1(int,_exit,int,exitcode)
+extern inline _syscall3(pid_t,waitpid,pid_t,pid,int *,wait_stat,int,options)
+
+extern inline pid_t wait(int * wait_stat)
+{
+	return waitpid (-1, wait_stat, 0);
+}
+
+unsigned long sys_mmap(unsigned long addr, size_t len,
+			unsigned long prot, unsigned long flags,
+			unsigned long fd, off_t offset);
+unsigned long sys_mmap2(unsigned long addr, size_t len,
+			unsigned long prot, unsigned long flags,
+			unsigned long fd, unsigned long pgoff);
+struct pt_regs;
+int sys_execve (char *name, char **argv, char **envp, struct pt_regs *regs);
+int sys_pipe (int *fildes);
+int sys_ptrace(long request, long pid, long addr, long data);
+struct sigaction;
+asmlinkage long sys_rt_sigaction(int sig,
+				const struct sigaction __user *act,
+				struct sigaction __user *oact,
+				size_t sigsetsize);
+
+#endif
+
+/*
+ * "Conditional" syscalls
+ */
+#define cond_syscall(name)						      \
+  asm (".weak\t" C_SYMBOL_STRING(name) ";"				      \
+       ".set\t" C_SYMBOL_STRING(name) "," C_SYMBOL_STRING(sys_ni_syscall))
+#if 0
+/* This doesn't work if there's a function prototype for NAME visible,
+   because the argument types probably won't match.  */
+#define cond_syscall(name)  \
+  void name (void) __attribute__ ((weak, alias ("sys_ni_syscall")));
+#endif
+
+#endif /* __V850_UNISTD_H__ */
diff --git a/include/asm-v850/user.h b/include/asm-v850/user.h
new file mode 100644
index 0000000..ccf4cea
--- /dev/null
+++ b/include/asm-v850/user.h
@@ -0,0 +1,56 @@
+#ifndef __V850_USER_H__
+#define __V850_USER_H__
+
+/* Adapted from <asm-ppc/user.h>.  */
+
+#ifdef __KERNEL__
+
+#include <linux/ptrace.h>
+#include <asm/page.h>
+
+/*
+ * Core file format: The core file is written in such a way that gdb
+ * can understand it and provide useful information to the user (under
+ * linux we use the `trad-core' bfd, NOT the osf-core).  The file contents
+ * are as follows:
+ *
+ *  upage: 1 page consisting of a user struct that tells gdb
+ *	what is present in the file.  Directly after this is a
+ *	copy of the task_struct, which is currently not used by gdb,
+ *	but it may come in handy at some point.  All of the registers
+ *	are stored as part of the upage.  The upage should always be
+ *	only one page long.
+ *  data: The data segment follows next.  We use current->end_text to
+ *	current->brk to pick up all of the user variables, plus any memory
+ *	that may have been sbrk'ed.  No attempt is made to determine if a
+ *	page is demand-zero or if a page is totally unused, we just cover
+ *	the entire range.  All of the addresses are rounded in such a way
+ *	that an integral number of pages is written.
+ *  stack: We need the stack information in order to get a meaningful
+ *	backtrace.  We need to write the data from usp to
+ *	current->start_stack, so we round each of these in order to be able
+ *	to write an integer number of pages.
+ */
+struct user {
+	struct pt_regs	regs;			/* entire machine state */
+	size_t		u_tsize;		/* text size (pages) */
+	size_t		u_dsize;		/* data size (pages) */
+	size_t		u_ssize;		/* stack size (pages) */
+	unsigned long	start_code;		/* text starting address */
+	unsigned long	start_data;		/* data starting address */
+	unsigned long	start_stack;		/* stack starting address */
+	long int	signal;			/* signal causing core dump */
+	struct regs *	u_ar0;			/* help gdb find registers */
+	unsigned long	magic;			/* identifies a core file */
+	char		u_comm[32];		/* user command name */
+};
+
+#define NBPG			PAGE_SIZE
+#define UPAGES			1
+#define HOST_TEXT_START_ADDR	(u.start_code)
+#define HOST_DATA_START_ADDR	(u.start_data)
+#define HOST_STACK_END_ADDR	(u.start_stack + u.u_ssize * NBPG)
+
+#endif /* __KERNEL__ */
+
+#endif /* __V850_USER_H__ */
diff --git a/include/asm-v850/v850e.h b/include/asm-v850/v850e.h
new file mode 100644
index 0000000..5a222eb
--- /dev/null
+++ b/include/asm-v850/v850e.h
@@ -0,0 +1,21 @@
+/*
+ * include/asm-v850/v850e.h -- V850E CPU
+ *
+ *  Copyright (C) 2001,02,03  NEC Electronics Corporation
+ *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef __V850_V850E_H__
+#define __V850_V850E_H__
+
+#include <asm/v850e_intc.h>
+
+#define CPU_ARCH "v850e"
+
+#endif /* __V850_V850E_H__ */
diff --git a/include/asm-v850/v850e2.h b/include/asm-v850/v850e2.h
new file mode 100644
index 0000000..4868040
--- /dev/null
+++ b/include/asm-v850/v850e2.h
@@ -0,0 +1,69 @@
+/*
+ * include/asm-v850/v850e2.h -- Machine-dependent defs for V850E2 CPUs
+ *
+ *  Copyright (C) 2002,03  NEC Electronics Corporation
+ *  Copyright (C) 2002,03  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef __V850_V850E2_H__
+#define __V850_V850E2_H__
+
+#include <asm/v850e_intc.h>	/* v850e-style interrupt system.  */
+
+
+#define CPU_ARCH "v850e2"
+
+
+/* Control registers.  */
+
+/* Chip area select control */ 
+#define V850E2_CSC_ADDR(n)	(0xFFFFF060 + (n) * 2)
+#define V850E2_CSC(n)		(*(volatile u16 *)V850E2_CSC_ADDR(n))
+/* I/O area select control */
+#define V850E2_BPC_ADDR		0xFFFFF064
+#define V850E2_BPC		(*(volatile u16 *)V850E2_BPC_ADDR)
+/* Bus size configuration */
+#define V850E2_BSC_ADDR		0xFFFFF066
+#define V850E2_BSC		(*(volatile u16 *)V850E2_BSC_ADDR)
+/* Endian configuration */
+#define V850E2_BEC_ADDR		0xFFFFF068
+#define V850E2_BEC		(*(volatile u16 *)V850E2_BEC_ADDR)
+/* Cache configuration */
+#define V850E2_BHC_ADDR		0xFFFFF06A
+#define V850E2_BHC		(*(volatile u16 *)V850E2_BHC_ADDR)
+/* NPB strobe-wait configuration */
+#define V850E2_VSWC_ADDR	0xFFFFF06E
+#define V850E2_VSWC		(*(volatile u16 *)V850E2_VSWC_ADDR)
+/* Bus cycle type */
+#define V850E2_BCT_ADDR(n)	(0xFFFFF480 + (n) * 2)
+#define V850E2_BCT(n)		(*(volatile u16 *)V850E2_BCT_ADDR(n))
+/* Data wait control */
+#define V850E2_DWC_ADDR(n)	(0xFFFFF484 + (n) * 2)
+#define V850E2_DWC(n)		(*(volatile u16 *)V850E2_DWC_ADDR(n))
+/* Bus cycle control */
+#define V850E2_BCC_ADDR		0xFFFFF488
+#define V850E2_BCC		(*(volatile u16 *)V850E2_BCC_ADDR)
+/* Address wait control */
+#define V850E2_ASC_ADDR		0xFFFFF48A
+#define V850E2_ASC		(*(volatile u16 *)V850E2_ASC_ADDR)
+/* Local bus sizing control */
+#define V850E2_LBS_ADDR		0xFFFFF48E
+#define V850E2_LBS		(*(volatile u16 *)V850E2_LBS_ADDR)
+/* Line buffer control */
+#define V850E2_LBC_ADDR(n)	(0xFFFFF490 + (n) * 2)
+#define V850E2_LBC(n)		(*(volatile u16 *)V850E2_LBC_ADDR(n))
+/* SDRAM configuration */
+#define V850E2_SCR_ADDR(n)	(0xFFFFF4A0 + (n) * 4)
+#define V850E2_SCR(n)		(*(volatile u16 *)V850E2_SCR_ADDR(n))
+/* SDRAM refresh cycle control */
+#define V850E2_RFS_ADDR(n)	(0xFFFFF4A2 + (n) * 4)
+#define V850E2_RFS(n)		(*(volatile u16 *)V850E2_RFS_ADDR(n))
+
+
+#endif /* __V850_V850E2_H__ */
diff --git a/include/asm-v850/v850e2_cache.h b/include/asm-v850/v850e2_cache.h
new file mode 100644
index 0000000..61acda1
--- /dev/null
+++ b/include/asm-v850/v850e2_cache.h
@@ -0,0 +1,74 @@
+/*
+ * include/asm-v850/v850e2_cache_cache.h -- Cache control for V850E2
+ * 	cache memories
+ *
+ *  Copyright (C) 2003  NEC Electronics Corporation
+ *  Copyright (C) 2003  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef __V850_V850E2_CACHE_H__
+#define __V850_V850E2_CACHE_H__
+
+#include <asm/types.h>
+
+
+/* Cache control registers.  */
+
+/* Bus Transaction Control */
+#define V850E2_CACHE_BTSC_ADDR	0xFFFFF070
+#define V850E2_CACHE_BTSC 	(*(volatile u16 *)V850E2_CACHE_BTSC_ADDR)
+#define V850E2_CACHE_BTSC_ICM	0x0001 /* icache enable */
+#define V850E2_CACHE_BTSC_DCM0	0x0004 /* dcache enable, bit 0 */
+#define V850E2_CACHE_BTSC_DCM1	0x0008 /* dcache enable, bit 1 */
+#define V850E2_CACHE_BTSC_DCM_WT		      /* write-through */ \
+			V850E2_CACHE_BTSC_DCM0
+#ifdef CONFIG_V850E2_V850E2S
+# define V850E2_CACHE_BTSC_DCM_WB_NO_ALLOC    /* write-back, non-alloc */ \
+			V850E2_CACHE_BTSC_DCM1	
+# define V850E2_CACHE_BTSC_DCM_WB_ALLOC	      /* write-back, non-alloc */ \
+			(V850E2_CACHE_BTSC_DCM1 | V850E2_CACHE_BTSC_DCM0)
+# define V850E2_CACHE_BTSC_ISEQ	0x0010 /* icache `address sequence mode' */
+# define V850E2_CACHE_BTSC_DSEQ	0x0020 /* dcache `address sequence mode' */
+# define V850E2_CACHE_BTSC_IRFC	0x0030
+# define V850E2_CACHE_BTSC_ILCD	0x4000
+# define V850E2_CACHE_BTSC_VABE	0x8000
+#endif /* CONFIG_V850E2_V850E2S */
+
+/* Cache operation start address register (low-bits).  */
+#define V850E2_CACHE_CADL_ADDR	0xFFFFF074
+#define V850E2_CACHE_CADL 	(*(volatile u16 *)V850E2_CACHE_CADL_ADDR)
+/* Cache operation start address register (high-bits).  */
+#define V850E2_CACHE_CADH_ADDR	0xFFFFF076
+#define V850E2_CACHE_CADH 	(*(volatile u16 *)V850E2_CACHE_CADH_ADDR)
+/* Cache operation count register.  */
+#define V850E2_CACHE_CCNT_ADDR	0xFFFFF078
+#define V850E2_CACHE_CCNT 	(*(volatile u16 *)V850E2_CACHE_CCNT_ADDR)
+/* Cache operation specification register.  */
+#define V850E2_CACHE_COPR_ADDR	0xFFFFF07A
+#define V850E2_CACHE_COPR 	(*(volatile u16 *)V850E2_CACHE_COPR_ADDR)
+#define V850E2_CACHE_COPR_STRT	0x0001 /* start cache operation */
+#define V850E2_CACHE_COPR_LBSL	0x0100 /* 0 = icache, 1 = dcache */
+#define V850E2_CACHE_COPR_WSLE	0x0200 /* operate on cache way */
+#define V850E2_CACHE_COPR_WSL(way) ((way) * 0x0400) /* way select */
+#define V850E2_CACHE_COPR_CFC(op)  ((op)  * 0x1000) /* cache function code */
+
+
+/* Size of a cache line in bytes.  */
+#define V850E2_CACHE_LINE_SIZE_BITS	4
+#define V850E2_CACHE_LINE_SIZE		(1 << V850E2_CACHE_LINE_SIZE_BITS)
+
+/* The size of each cache `way' in lines.  */
+#define V850E2_CACHE_WAY_SIZE		256
+
+
+/* For <asm/cache.h> */
+#define L1_CACHE_BYTES			V850E2_CACHE_LINE_SIZE
+
+
+#endif /* __V850_V850E2_CACHE_H__ */
diff --git a/include/asm-v850/v850e_cache.h b/include/asm-v850/v850e_cache.h
new file mode 100644
index 0000000..aa7d7eb
--- /dev/null
+++ b/include/asm-v850/v850e_cache.h
@@ -0,0 +1,48 @@
+/*
+ * include/asm-v850/v850e_cache.h -- Cache control for V850E cache memories
+ *
+ *  Copyright (C) 2001,03  NEC Electronics Corporation
+ *  Copyright (C) 2001,03  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+/* This file implements cache control for the rather simple cache used on
+   some V850E CPUs, specifically the NB85E/TEG CPU-core and the V850E/ME2
+   CPU.  V850E2 processors have their own (better) cache
+   implementation.  */
+
+#ifndef __V850_V850E_CACHE_H__
+#define __V850_V850E_CACHE_H__
+
+#include <asm/types.h>
+
+
+/* Cache control registers.  */
+#define V850E_CACHE_BHC_ADDR	0xFFFFF06A
+#define V850E_CACHE_BHC		(*(volatile u16 *)V850E_CACHE_BHC_ADDR)
+#define V850E_CACHE_ICC_ADDR	0xFFFFF070
+#define V850E_CACHE_ICC		(*(volatile u16 *)V850E_CACHE_ICC_ADDR)
+#define V850E_CACHE_ISI_ADDR	0xFFFFF072
+#define V850E_CACHE_ISI		(*(volatile u16 *)V850E_CACHE_ISI_ADDR)
+#define V850E_CACHE_DCC_ADDR	0xFFFFF078
+#define V850E_CACHE_DCC		(*(volatile u16 *)V850E_CACHE_DCC_ADDR)
+
+/* Size of a cache line in bytes.  */
+#define V850E_CACHE_LINE_SIZE	16
+
+/* For <asm/cache.h> */
+#define L1_CACHE_BYTES		V850E_CACHE_LINE_SIZE
+
+
+#if defined(__KERNEL__) && !defined(__ASSEMBLY__)
+/* Set caching params via the BHC, ICC, and DCC registers.  */
+void v850e_cache_enable (u16 bhc, u16 icc, u16 dcc);
+#endif /* __KERNEL__ && !__ASSEMBLY__ */
+
+
+#endif /* __V850_V850E_CACHE_H__ */
diff --git a/include/asm-v850/v850e_intc.h b/include/asm-v850/v850e_intc.h
new file mode 100644
index 0000000..6fdf957
--- /dev/null
+++ b/include/asm-v850/v850e_intc.h
@@ -0,0 +1,133 @@
+/*
+ * include/asm-v850/v850e_intc.h -- V850E CPU interrupt controller (INTC)
+ *
+ *  Copyright (C) 2001,02,03  NEC Electronics Corporation
+ *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef __V850_V850E_INTC_H__
+#define __V850_V850E_INTC_H__
+
+
+/* There are 4 16-bit `Interrupt Mask Registers' located contiguously
+   starting from this base.  Each interrupt uses a single bit to
+   indicated enabled/disabled status.  */
+#define V850E_INTC_IMR_BASE_ADDR  0xFFFFF100
+#define V850E_INTC_IMR_ADDR(irq)  (V850E_INTC_IMR_BASE_ADDR + ((irq) >> 3))
+#define V850E_INTC_IMR_BIT(irq)	  ((irq) & 0x7)
+
+/* Each maskable interrupt has a single-byte control register at this
+   address.  */
+#define V850E_INTC_IC_BASE_ADDR	  0xFFFFF110
+#define V850E_INTC_IC_ADDR(irq)	  (V850E_INTC_IC_BASE_ADDR + ((irq) << 1))
+#define V850E_INTC_IC(irq)	  (*(volatile u8 *)V850E_INTC_IC_ADDR(irq))
+/* Encode priority PR for storing in an interrupt control register.  */
+#define V850E_INTC_IC_PR(pr)	  (pr)
+/* Interrupt disable bit in an interrupt control register.  */
+#define V850E_INTC_IC_MK_BIT	  6
+#define V850E_INTC_IC_MK	  (1 << V850E_INTC_IC_MK_BIT)
+/* Interrupt pending flag in an interrupt control register.  */
+#define V850E_INTC_IC_IF_BIT	  7
+#define V850E_INTC_IC_IF	  (1 << V850E_INTC_IC_IF_BIT)
+
+/* The ISPR (In-service priority register) contains one bit for each interrupt
+   priority level, which is set to one when that level is currently being
+   serviced (and thus blocking any interrupts of equal or lesser level).  */
+#define V850E_INTC_ISPR_ADDR	  0xFFFFF1FA
+#define V850E_INTC_ISPR		  (*(volatile u8 *)V850E_INTC_ISPR_ADDR)
+
+
+#ifndef __ASSEMBLY__
+
+/* Enable interrupt handling for interrupt IRQ.  */
+static inline void v850e_intc_enable_irq (unsigned irq)
+{
+	__asm__ __volatile__ ("clr1 %0, [%1]"
+			      :: "r" (V850E_INTC_IMR_BIT (irq)),
+			         "r" (V850E_INTC_IMR_ADDR (irq))
+			      : "memory");
+}
+
+/* Disable interrupt handling for interrupt IRQ.  Note that any
+   interrupts received while disabled will be delivered once the
+   interrupt is enabled again, unless they are explicitly cleared using
+   `v850e_intc_clear_pending_irq'.  */
+static inline void v850e_intc_disable_irq (unsigned irq)
+{
+	__asm__ __volatile__ ("set1 %0, [%1]"
+			      :: "r" (V850E_INTC_IMR_BIT (irq)),
+			         "r" (V850E_INTC_IMR_ADDR (irq))
+			      : "memory");
+}
+
+/* Return true if interrupt handling for interrupt IRQ is enabled.  */
+static inline int v850e_intc_irq_enabled (unsigned irq)
+{
+	int rval;
+	__asm__ __volatile__ ("tst1 %1, [%2]; setf z, %0"
+			      : "=r" (rval)
+			      : "r" (V850E_INTC_IMR_BIT (irq)),
+			        "r" (V850E_INTC_IMR_ADDR (irq)));
+	return rval;
+}
+
+/* Disable irqs from 0 until LIMIT.  LIMIT must be a multiple of 8.  */
+static inline void _v850e_intc_disable_irqs (unsigned limit)
+{
+	unsigned long addr;
+	for (addr = V850E_INTC_IMR_BASE_ADDR; limit >= 8; addr++, limit -= 8)
+		*(char *)addr = 0xFF;
+}
+
+/* Disable all irqs.  This is purposely a macro, because NUM_MACH_IRQS
+   will be only be defined later.  */
+#define v850e_intc_disable_irqs()   _v850e_intc_disable_irqs (NUM_MACH_IRQS)
+
+/* Clear any pending interrupts for IRQ.  */
+static inline void v850e_intc_clear_pending_irq (unsigned irq)
+{
+	__asm__ __volatile__ ("clr1 %0, 0[%1]"
+			      :: "i" (V850E_INTC_IC_IF_BIT),
+			         "r" (V850E_INTC_IC_ADDR (irq))
+			      : "memory");
+}
+
+/* Return true if interrupt IRQ is pending (but disabled).  */
+static inline int v850e_intc_irq_pending (unsigned irq)
+{
+	int rval;
+	__asm__ __volatile__ ("tst1 %1, 0[%2]; setf nz, %0"
+			      : "=r" (rval)
+			      : "i" (V850E_INTC_IC_IF_BIT),
+			        "r" (V850E_INTC_IC_ADDR (irq)));
+	return rval;
+}
+
+
+struct v850e_intc_irq_init {
+	const char *name;	/* name of interrupt type */
+
+	/* Range of kernel irq numbers for this type:
+	   BASE, BASE+INTERVAL, ..., BASE+INTERVAL*NUM  */
+	unsigned base, num, interval;
+
+	unsigned priority;	/* interrupt priority to assign */
+};
+struct hw_interrupt_type;	/* fwd decl */
+
+/* Initialize HW_IRQ_TYPES for INTC-controlled irqs described in array
+   INITS (which is terminated by an entry with the name field == 0).  */
+extern void v850e_intc_init_irq_types (struct v850e_intc_irq_init *inits,
+				       struct hw_interrupt_type *hw_irq_types);
+
+
+#endif /* !__ASSEMBLY__ */
+
+
+#endif /* __V850_V850E_INTC_H__ */
diff --git a/include/asm-v850/v850e_timer_c.h b/include/asm-v850/v850e_timer_c.h
new file mode 100644
index 0000000..f70575d
--- /dev/null
+++ b/include/asm-v850/v850e_timer_c.h
@@ -0,0 +1,48 @@
+/*
+ * include/asm-v850/v850e_timer_c.h -- `Timer C' component often used
+ *	with the V850E cpu core
+ *
+ *  Copyright (C) 2001,03  NEC Electronics Corporation
+ *  Copyright (C) 2001,03  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+/* NOTE: this include file currently contains only enough to allow us to
+   use timer C as an interrupt pass-through.  */
+
+#ifndef __V850_V850E_TIMER_C_H__
+#define __V850_V850E_TIMER_C_H__
+
+#include <asm/types.h>
+#include <asm/machdep.h>	/* Pick up chip-specific defs.  */
+
+
+/* Timer C (16-bit interval timers).  */
+
+/* Control register 0 for timer C.  */
+#define V850E_TIMER_C_TMCC0_ADDR(n) (V850E_TIMER_C_BASE_ADDR + 0x6 + 0x10 *(n))
+#define V850E_TIMER_C_TMCC0(n)	  (*(volatile u8 *)V850E_TIMER_C_TMCC0_ADDR(n))
+#define V850E_TIMER_C_TMCC0_CAE	  0x01 /* clock action enable */
+#define V850E_TIMER_C_TMCC0_CE	  0x02 /* count enable */
+/* ... */
+
+/* Control register 1 for timer C.  */
+#define V850E_TIMER_C_TMCC1_ADDR(n) (V850E_TIMER_C_BASE_ADDR + 0x8 + 0x10 *(n))
+#define V850E_TIMER_C_TMCC1(n)	  (*(volatile u8 *)V850E_TIMER_C_TMCC1_ADDR(n))
+#define V850E_TIMER_C_TMCC1_CMS0  0x01 /* capture/compare mode select (ccc0) */
+#define V850E_TIMER_C_TMCC1_CMS1  0x02 /* capture/compare mode select (ccc1) */
+/* ... */
+
+/* Interrupt edge-sensitivity control for timer C.  */
+#define V850E_TIMER_C_SESC_ADDR(n) (V850E_TIMER_C_BASE_ADDR + 0x9 + 0x10 *(n))
+#define V850E_TIMER_C_SESC(n)	  (*(volatile u8 *)V850E_TIMER_C_SESC_ADDR(n))
+
+/* ...etc... */
+
+
+#endif /* __V850_V850E_TIMER_C_H__  */
diff --git a/include/asm-v850/v850e_timer_d.h b/include/asm-v850/v850e_timer_d.h
new file mode 100644
index 0000000..417612c
--- /dev/null
+++ b/include/asm-v850/v850e_timer_d.h
@@ -0,0 +1,62 @@
+/*
+ * include/asm-v850/v850e_timer_d.h -- `Timer D' component often used
+ *	with the V850E cpu core
+ *
+ *  Copyright (C) 2001,02,03  NEC Electronics Corporation
+ *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef __V850_V850E_TIMER_D_H__
+#define __V850_V850E_TIMER_D_H__
+
+#include <asm/types.h>
+#include <asm/machdep.h>	/* Pick up chip-specific defs.  */
+
+
+/* Timer D (16-bit interval timers).  */
+
+/* Count registers for timer D.  */
+#define V850E_TIMER_D_TMD_ADDR(n) (V850E_TIMER_D_TMD_BASE_ADDR + 0x10 * (n))
+#define V850E_TIMER_D_TMD(n)	  (*(volatile u16 *)V850E_TIMER_D_TMD_ADDR(n))
+
+/* Count compare registers for timer D.  */
+#define V850E_TIMER_D_CMD_ADDR(n) (V850E_TIMER_D_CMD_BASE_ADDR + 0x10 * (n))
+#define V850E_TIMER_D_CMD(n)	  (*(volatile u16 *)V850E_TIMER_D_CMD_ADDR(n))
+
+/* Control registers for timer D.  */
+#define V850E_TIMER_D_TMCD_ADDR(n) (V850E_TIMER_D_TMCD_BASE_ADDR + 0x10 * (n))
+#define V850E_TIMER_D_TMCD(n)	   (*(volatile u8 *)V850E_TIMER_D_TMCD_ADDR(n))
+/* Control bits for timer D.  */
+#define V850E_TIMER_D_TMCD_CE  	   0x2 /* count enable */
+#define V850E_TIMER_D_TMCD_CAE	   0x1 /* clock action enable */
+/* Clock divider setting (log2).  */
+#define V850E_TIMER_D_TMCD_CS(divlog2) (((divlog2) - V850E_TIMER_D_TMCD_CS_MIN) << 4)
+/* Minimum clock divider setting (log2).  */
+#ifndef V850E_TIMER_D_TMCD_CS_MIN /* Can be overridden by mach-specific hdrs */
+#define V850E_TIMER_D_TMCD_CS_MIN  2 /* Default is correct for the v850e/ma1 */
+#endif
+/* Maximum clock divider setting (log2).  */
+#define V850E_TIMER_D_TMCD_CS_MAX  (V850E_TIMER_D_TMCD_CS_MIN + 7)
+
+/* Return the clock-divider (log2) of timer D unit N.  */
+#define V850E_TIMER_D_DIVLOG2(n) \
+  (((V850E_TIMER_D_TMCD(n) >> 4) & 0x7) + V850E_TIMER_D_TMCD_CS_MIN)
+
+
+#ifndef __ASSEMBLY__
+
+/* Start interval timer TIMER (0-3).  The timer will issue the
+   corresponding INTCMD interrupt RATE times per second.  This function
+   does not enable the interrupt.  */
+extern void v850e_timer_d_configure (unsigned timer, unsigned rate);
+
+#endif /* !__ASSEMBLY__ */
+
+
+#endif /* __V850_V850E_TIMER_D_H__  */
diff --git a/include/asm-v850/v850e_uart.h b/include/asm-v850/v850e_uart.h
new file mode 100644
index 0000000..5930d59
--- /dev/null
+++ b/include/asm-v850/v850e_uart.h
@@ -0,0 +1,77 @@
+/*
+ * include/asm-v850/v850e_uart.h -- common V850E on-chip UART driver
+ *
+ *  Copyright (C) 2001,02,03  NEC Electronics Corporation
+ *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+/* There's not actually a single UART implementation used by V850E CPUs,
+   but rather a series of implementations that are all `close' to one
+   another.  This file corresponds to the single driver which handles all
+   of them.  */
+
+#ifndef __V850_V850E_UART_H__
+#define __V850_V850E_UART_H__
+
+#include <linux/config.h>
+#include <linux/termios.h>
+
+#include <asm/v850e_utils.h>
+#include <asm/types.h>
+#include <asm/machdep.h>	/* Pick up chip-specific defs.  */
+
+
+/* Include model-specific definitions.  */
+#ifdef CONFIG_V850E_UART
+# ifdef CONFIG_V850E_UARTB
+#  include <asm-v850/v850e_uartb.h>
+# else
+#  include <asm-v850/v850e_uarta.h> /* original V850E UART */
+# endif
+#endif
+
+
+/* Optional capabilities some hardware provides.  */
+
+/* This UART doesn't implement RTS/CTS by default, but some platforms
+   implement them externally, so check to see if <asm/machdep.h> defined
+   anything.  */
+#ifdef V850E_UART_CTS
+#define v850e_uart_cts(n)		V850E_UART_CTS(n)
+#else
+#define v850e_uart_cts(n)		(1)
+#endif
+
+/* Do the same for RTS.  */
+#ifdef V850E_UART_SET_RTS
+#define v850e_uart_set_rts(n,v)		V850E_UART_SET_RTS(n,v)
+#else
+#define v850e_uart_set_rts(n,v)		((void)0)
+#endif
+
+
+/* This is the serial channel to use for the boot console (if desired).  */
+#ifndef V850E_UART_CONSOLE_CHANNEL
+# define V850E_UART_CONSOLE_CHANNEL 0
+#endif
+
+
+#ifndef __ASSEMBLY__
+
+/* Setup a console using channel 0 of the builtin uart.  */
+extern void v850e_uart_cons_init (unsigned chan);
+
+/* Configure and turn on uart channel CHAN, using the termios `control
+   modes' bits in CFLAGS, and a baud-rate of BAUD.  */
+void v850e_uart_configure (unsigned chan, unsigned cflags, unsigned baud);
+
+#endif /* !__ASSEMBLY__ */
+
+
+#endif /* __V850_V850E_UART_H__ */
diff --git a/include/asm-v850/v850e_uarta.h b/include/asm-v850/v850e_uarta.h
new file mode 100644
index 0000000..e483e09
--- /dev/null
+++ b/include/asm-v850/v850e_uarta.h
@@ -0,0 +1,278 @@
+/*
+ * include/asm-v850/v850e_uarta.h -- original V850E on-chip UART
+ *
+ *  Copyright (C) 2001,02,03  NEC Electronics Corporation
+ *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+/* This is the original V850E UART implementation is called just `UART' in
+   the docs, but we name this header file <asm/v850e_uarta.h> because the
+   name <asm/v850e_uart.h> is used for the common driver that handles both
+   `UART' and `UARTB' implementations.  */
+
+#ifndef __V850_V850E_UARTA_H__
+#define __V850_V850E_UARTA_H__
+
+
+/* Raw hardware interface.  */
+
+/* The base address of the UART control registers for channel N.
+   The default is the address used on the V850E/MA1.  */
+#ifndef V850E_UART_BASE_ADDR
+#define V850E_UART_BASE_ADDR(n)		(0xFFFFFA00 + 0x10 * (n))
+#endif 
+
+/* Addresses of specific UART control registers for channel N.
+   The defaults are the addresses used on the V850E/MA1; if a platform
+   wants to redefine any of these, it must redefine them all.  */
+#ifndef V850E_UART_ASIM_ADDR
+#define V850E_UART_ASIM_ADDR(n)		(V850E_UART_BASE_ADDR(n) + 0x0)
+#define V850E_UART_RXB_ADDR(n)		(V850E_UART_BASE_ADDR(n) + 0x2)
+#define V850E_UART_ASIS_ADDR(n)		(V850E_UART_BASE_ADDR(n) + 0x3)
+#define V850E_UART_TXB_ADDR(n)		(V850E_UART_BASE_ADDR(n) + 0x4)
+#define V850E_UART_ASIF_ADDR(n)		(V850E_UART_BASE_ADDR(n) + 0x5)
+#define V850E_UART_CKSR_ADDR(n)		(V850E_UART_BASE_ADDR(n) + 0x6)
+#define V850E_UART_BRGC_ADDR(n)		(V850E_UART_BASE_ADDR(n) + 0x7)
+#endif
+
+/* UART config registers.  */
+#define V850E_UART_ASIM(n)	(*(volatile u8 *)V850E_UART_ASIM_ADDR(n))
+/* Control bits for config registers.  */
+#define V850E_UART_ASIM_CAE	0x80 /* clock enable */
+#define V850E_UART_ASIM_TXE	0x40 /* transmit enable */
+#define V850E_UART_ASIM_RXE	0x20 /* receive enable */
+#define V850E_UART_ASIM_PS_MASK	0x18 /* mask covering parity-select bits */
+#define V850E_UART_ASIM_PS_NONE	0x00 /* no parity */
+#define V850E_UART_ASIM_PS_ZERO	0x08 /* zero parity */
+#define V850E_UART_ASIM_PS_ODD	0x10 /* odd parity */
+#define V850E_UART_ASIM_PS_EVEN	0x18 /* even parity */
+#define V850E_UART_ASIM_CL_8	0x04 /* char len is 8 bits (otherwise, 7) */
+#define V850E_UART_ASIM_SL_2	0x02 /* 2 stop bits (otherwise, 1) */
+#define V850E_UART_ASIM_ISRM	0x01 /* generate INTSR interrupt on errors
+					(otherwise, generate INTSER) */
+
+/* UART serial interface status registers.  */
+#define V850E_UART_ASIS(n)	(*(volatile u8 *)V850E_UART_ASIS_ADDR(n))
+/* Control bits for status registers.  */
+#define V850E_UART_ASIS_PE	0x04 /* parity error */
+#define V850E_UART_ASIS_FE	0x02 /* framing error */
+#define V850E_UART_ASIS_OVE	0x01 /* overrun error */
+
+/* UART serial interface transmission status registers.  */
+#define V850E_UART_ASIF(n)	(*(volatile u8 *)V850E_UART_ASIF_ADDR(n))
+#define V850E_UART_ASIF_TXBF	0x02 /* transmit buffer flag (data in TXB) */
+#define V850E_UART_ASIF_TXSF	0x01 /* transmit shift flag (sending data) */
+
+/* UART receive buffer register.  */
+#define V850E_UART_RXB(n)	(*(volatile u8 *)V850E_UART_RXB_ADDR(n))
+
+/* UART transmit buffer register.  */
+#define V850E_UART_TXB(n)	(*(volatile u8 *)V850E_UART_TXB_ADDR(n))
+
+/* UART baud-rate generator control registers.  */
+#define V850E_UART_CKSR(n)	(*(volatile u8 *)V850E_UART_CKSR_ADDR(n))
+#define V850E_UART_CKSR_MAX	11
+#define V850E_UART_BRGC(n)	(*(volatile u8 *)V850E_UART_BRGC_ADDR(n))
+#define V850E_UART_BRGC_MIN	8
+
+
+#ifndef V850E_UART_CKSR_MAX_FREQ
+#define V850E_UART_CKSR_MAX_FREQ (25*1000*1000)
+#endif
+
+/* Calculate the minimum value for CKSR on this processor.  */
+static inline unsigned v850e_uart_cksr_min (void)
+{
+	int min = 0;
+	unsigned freq = V850E_UART_BASE_FREQ;
+	while (freq > V850E_UART_CKSR_MAX_FREQ) {
+		freq >>= 1;
+		min++;
+	}
+	return min;
+}
+
+
+/* Slightly abstract interface used by driver.  */
+
+
+/* Interrupts used by the UART.  */
+
+/* Received when the most recently transmitted character has been sent.  */
+#define V850E_UART_TX_IRQ(chan)		IRQ_INTST (chan)
+/* Received when a new character has been received.  */
+#define V850E_UART_RX_IRQ(chan)		IRQ_INTSR (chan)
+
+
+/* UART clock generator interface.  */
+
+/* This type encapsulates a particular uart frequency.  */
+typedef struct {
+	unsigned clk_divlog2;
+	unsigned brgen_count;
+} v850e_uart_speed_t;
+
+/* Calculate a uart speed from BAUD for this uart.  */
+static inline v850e_uart_speed_t v850e_uart_calc_speed (unsigned baud)
+{
+	v850e_uart_speed_t speed;
+
+	/* Calculate the log2 clock divider and baud-rate counter values
+	   (note that the UART divides the resulting clock by 2, so
+	   multiply BAUD by 2 here to compensate).  */
+	calc_counter_params (V850E_UART_BASE_FREQ, baud * 2,
+			     v850e_uart_cksr_min(),
+			     V850E_UART_CKSR_MAX, 8/*bits*/,
+			     &speed.clk_divlog2, &speed.brgen_count);
+
+	return speed;
+}
+
+/* Return the current speed of uart channel CHAN.  */
+static inline v850e_uart_speed_t v850e_uart_speed (unsigned chan)
+{
+	v850e_uart_speed_t speed;
+	speed.clk_divlog2 = V850E_UART_CKSR (chan);
+	speed.brgen_count = V850E_UART_BRGC (chan);
+	return speed;
+}
+
+/* Set the current speed of uart channel CHAN.  */
+static inline void v850e_uart_set_speed(unsigned chan,v850e_uart_speed_t speed)
+{
+	V850E_UART_CKSR (chan) = speed.clk_divlog2;
+	V850E_UART_BRGC (chan) = speed.brgen_count;
+}
+
+static inline int
+v850e_uart_speed_eq (v850e_uart_speed_t speed1, v850e_uart_speed_t speed2)
+{
+	return speed1.clk_divlog2 == speed2.clk_divlog2
+		&& speed1.brgen_count == speed2.brgen_count;
+}
+
+/* Minimum baud rate possible.  */
+#define v850e_uart_min_baud() \
+   ((V850E_UART_BASE_FREQ >> V850E_UART_CKSR_MAX) / (2 * 255) + 1)
+
+/* Maximum baud rate possible.  The error is quite high at max, though.  */
+#define v850e_uart_max_baud() \
+   ((V850E_UART_BASE_FREQ >> v850e_uart_cksr_min()) / (2 *V850E_UART_BRGC_MIN))
+
+/* The `maximum' clock rate the uart can used, which is wanted (though not
+   really used in any useful way) by the serial framework.  */
+#define v850e_uart_max_clock() \
+   ((V850E_UART_BASE_FREQ >> v850e_uart_cksr_min()) / 2)
+
+
+/* UART configuration interface.  */
+
+/* Type of the uart config register; must be a scalar.  */
+typedef u16 v850e_uart_config_t;
+
+/* The uart hardware config register for channel CHAN.  */
+#define V850E_UART_CONFIG(chan)		V850E_UART_ASIM (chan)
+
+/* This config bit set if the uart is enabled.  */
+#define V850E_UART_CONFIG_ENABLED	V850E_UART_ASIM_CAE
+/* If the uart _isn't_ enabled, store this value to it to do so.  */
+#define V850E_UART_CONFIG_INIT		V850E_UART_ASIM_CAE
+/* Store this config value to disable the uart channel completely.  */
+#define V850E_UART_CONFIG_FINI		0
+
+/* Setting/clearing these bits enable/disable TX/RX, respectively (but
+   otherwise generally leave things running).  */
+#define V850E_UART_CONFIG_RX_ENABLE	V850E_UART_ASIM_RXE
+#define V850E_UART_CONFIG_TX_ENABLE	V850E_UART_ASIM_TXE
+
+/* These masks define which config bits affect TX/RX modes, respectively.  */
+#define V850E_UART_CONFIG_RX_BITS \
+  (V850E_UART_ASIM_PS_MASK | V850E_UART_ASIM_CL_8 | V850E_UART_ASIM_ISRM)
+#define V850E_UART_CONFIG_TX_BITS \
+  (V850E_UART_ASIM_PS_MASK | V850E_UART_ASIM_CL_8 | V850E_UART_ASIM_SL_2)
+
+static inline v850e_uart_config_t v850e_uart_calc_config (unsigned cflags)
+{
+	v850e_uart_config_t config = 0;
+
+	/* Figure out new configuration of control register.  */
+	if (cflags & CSTOPB)
+		/* Number of stop bits, 1 or 2.  */
+		config |= V850E_UART_ASIM_SL_2;
+	if ((cflags & CSIZE) == CS8)
+		/* Number of data bits, 7 or 8.  */
+		config |= V850E_UART_ASIM_CL_8;
+	if (! (cflags & PARENB))
+		/* No parity check/generation.  */
+		config |= V850E_UART_ASIM_PS_NONE;
+	else if (cflags & PARODD)
+		/* Odd parity check/generation.  */
+		config |= V850E_UART_ASIM_PS_ODD;
+	else
+		/* Even parity check/generation.  */
+		config |= V850E_UART_ASIM_PS_EVEN;
+	if (cflags & CREAD)
+		/* Reading enabled.  */
+		config |= V850E_UART_ASIM_RXE;
+
+	config |= V850E_UART_ASIM_CAE;
+	config |= V850E_UART_ASIM_TXE; /* Writing is always enabled.  */
+	config |= V850E_UART_ASIM_ISRM; /* Errors generate a read-irq.  */
+
+	return config;
+}
+
+/* This should delay as long as necessary for a recently written config
+   setting to settle, before we turn the uart back on.  */
+static inline void
+v850e_uart_config_delay (v850e_uart_config_t config, v850e_uart_speed_t speed)
+{
+	/* The UART may not be reset properly unless we wait at least 2
+	   `basic-clocks' until turning on the TXE/RXE bits again.
+	   A `basic clock' is the clock used by the baud-rate generator,
+	   i.e., the cpu clock divided by the 2^new_clk_divlog2.
+	   The loop takes 2 insns, so loop CYCLES / 2 times.  */
+	register unsigned count = 1 << speed.clk_divlog2;
+	while (--count != 0)
+		/* nothing */;
+}
+
+
+/* RX/TX interface.  */
+
+/* Return true if all characters awaiting transmission on uart channel N
+   have been transmitted.  */
+#define v850e_uart_xmit_done(n)						      \
+   (! (V850E_UART_ASIF(n) & V850E_UART_ASIF_TXBF))
+/* Wait for this to be true.  */
+#define v850e_uart_wait_for_xmit_done(n)				      \
+   do { } while (! v850e_uart_xmit_done (n))
+
+/* Return true if uart channel N is ready to transmit a character.  */
+#define v850e_uart_xmit_ok(n)						      \
+   (v850e_uart_xmit_done(n) && v850e_uart_cts(n))
+/* Wait for this to be true.  */
+#define v850e_uart_wait_for_xmit_ok(n)					      \
+   do { } while (! v850e_uart_xmit_ok (n))
+
+/* Write character CH to uart channel CHAN.  */
+#define v850e_uart_putc(chan, ch)	(V850E_UART_TXB(chan) = (ch))
+
+/* Return latest character read on channel CHAN.  */
+#define v850e_uart_getc(chan)		V850E_UART_RXB (chan)
+
+/* Return bit-mask of uart error status.  */
+#define v850e_uart_err(chan)		V850E_UART_ASIS (chan)
+/* Various error bits set in the error result.  */
+#define V850E_UART_ERR_OVERRUN		V850E_UART_ASIS_OVE
+#define V850E_UART_ERR_FRAME		V850E_UART_ASIS_FE
+#define V850E_UART_ERR_PARITY		V850E_UART_ASIS_PE
+
+
+#endif /* __V850_V850E_UARTA_H__ */
diff --git a/include/asm-v850/v850e_uartb.h b/include/asm-v850/v850e_uartb.h
new file mode 100644
index 0000000..6d4767d
--- /dev/null
+++ b/include/asm-v850/v850e_uartb.h
@@ -0,0 +1,262 @@
+/*
+ * include/asm-v850/v850e_uartb.h -- V850E on-chip `UARTB' UART
+ *
+ *  Copyright (C) 2001,02,03  NEC Electronics Corporation
+ *  Copyright (C) 2001,02,03  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+/* The V850E UARTB is basically a superset of the original V850E UART, but
+   even where it's the same, the names and details have changed a bit.
+   It's similar enough to use the same driver (v850e_uart.c), but the
+   details have been abstracted slightly to do so.  */
+
+#ifndef __V850_V850E_UARTB_H__
+#define __V850_V850E_UARTB_H__
+
+
+/* Raw hardware interface.  */
+
+#define V850E_UARTB_BASE_ADDR(n)	(0xFFFFFA00 + 0x10 * (n))
+
+/* Addresses of specific UART control registers for channel N.  */
+#define V850E_UARTB_CTL0_ADDR(n)	(V850E_UARTB_BASE_ADDR(n) + 0x0)
+#define V850E_UARTB_CTL2_ADDR(n)	(V850E_UARTB_BASE_ADDR(n) + 0x2)
+#define V850E_UARTB_STR_ADDR(n)		(V850E_UARTB_BASE_ADDR(n) + 0x4)
+#define V850E_UARTB_RX_ADDR(n)		(V850E_UARTB_BASE_ADDR(n) + 0x6)
+#define V850E_UARTB_RXAP_ADDR(n)	(V850E_UARTB_BASE_ADDR(n) + 0x6)
+#define V850E_UARTB_TX_ADDR(n)		(V850E_UARTB_BASE_ADDR(n) + 0x8)
+#define V850E_UARTB_FIC0_ADDR(n)	(V850E_UARTB_BASE_ADDR(n) + 0xA)
+#define V850E_UARTB_FIC1_ADDR(n)	(V850E_UARTB_BASE_ADDR(n) + 0xB)
+#define V850E_UARTB_FIC2_ADDR(n)	(V850E_UARTB_BASE_ADDR(n) + 0xC)
+#define V850E_UARTB_FIS0_ADDR(n)	(V850E_UARTB_BASE_ADDR(n) + 0xE)
+#define V850E_UARTB_FIS1_ADDR(n)	(V850E_UARTB_BASE_ADDR(n) + 0xF)
+
+/* UARTB control register 0 (general config).  */
+#define V850E_UARTB_CTL0(n)	(*(volatile u8 *)V850E_UARTB_CTL0_ADDR(n))
+/* Control bits for config registers.  */
+#define V850E_UARTB_CTL0_PWR		0x80	/* clock enable */
+#define V850E_UARTB_CTL0_TXE		0x40	/* transmit enable */
+#define V850E_UARTB_CTL0_RXE		0x20	/* receive enable */
+#define V850E_UARTB_CTL0_DIR		0x10	/*  */
+#define V850E_UARTB_CTL0_PS1		0x08	/* parity */
+#define V850E_UARTB_CTL0_PS0		0x04	/* parity */
+#define V850E_UARTB_CTL0_CL		0x02	/* char len 1:8bit, 0:7bit */
+#define V850E_UARTB_CTL0_SL		0x01	/* stop bit 1:2bit, 0:1bit */
+#define V850E_UARTB_CTL0_PS_MASK	0x0C	/* mask covering parity bits */
+#define V850E_UARTB_CTL0_PS_NONE	0x00	/* no parity */
+#define V850E_UARTB_CTL0_PS_ZERO	0x04	/* zero parity */
+#define V850E_UARTB_CTL0_PS_ODD		0x08	/* odd parity */
+#define V850E_UARTB_CTL0_PS_EVEN	0x0C	/* even parity */
+#define V850E_UARTB_CTL0_CL_8		0x02	/* char len 1:8bit, 0:7bit */
+#define V850E_UARTB_CTL0_SL_2		0x01	/* stop bit 1:2bit, 0:1bit */
+
+/* UARTB control register 2 (clock divider).  */
+#define V850E_UARTB_CTL2(n)	(*(volatile u16 *)V850E_UARTB_CTL2_ADDR(n))
+#define V850E_UARTB_CTL2_MIN	4
+#define V850E_UARTB_CTL2_MAX	0xFFFF
+
+/* UARTB serial interface status register.  */
+#define V850E_UARTB_STR(n)	(*(volatile u8 *)V850E_UARTB_STR_ADDR(n))
+/* Control bits for status registers.  */
+#define V850E_UARTB_STR_TSF	0x80	/* UBTX or FIFO exist data  */
+#define V850E_UARTB_STR_OVF	0x08	/* overflow error */
+#define V850E_UARTB_STR_PE	0x04	/* parity error */
+#define V850E_UARTB_STR_FE	0x02	/* framing error */
+#define V850E_UARTB_STR_OVE	0x01	/* overrun error */
+
+/* UARTB receive data register.  */
+#define V850E_UARTB_RX(n)	(*(volatile u8 *)V850E_UARTB_RX_ADDR(n))
+#define V850E_UARTB_RXAP(n)	(*(volatile u16 *)V850E_UARTB_RXAP_ADDR(n))
+/* Control bits for status registers.  */
+#define V850E_UARTB_RXAP_PEF	0x0200 /* parity error */
+#define V850E_UARTB_RXAP_FEF	0x0100 /* framing error */
+
+/* UARTB transmit data register.  */
+#define V850E_UARTB_TX(n)	(*(volatile u8 *)V850E_UARTB_TX_ADDR(n))
+
+/* UARTB FIFO control register 0.  */
+#define V850E_UARTB_FIC0(n)	(*(volatile u8 *)V850E_UARTB_FIC0_ADDR(n))
+
+/* UARTB FIFO control register 1.  */
+#define V850E_UARTB_FIC1(n)	(*(volatile u8 *)V850E_UARTB_FIC1_ADDR(n))
+
+/* UARTB FIFO control register 2.  */
+#define V850E_UARTB_FIC2(n)	(*(volatile u16 *)V850E_UARTB_FIC2_ADDR(n))
+
+/* UARTB FIFO status register 0.  */
+#define V850E_UARTB_FIS0(n)	(*(volatile u8 *)V850E_UARTB_FIS0_ADDR(n))
+
+/* UARTB FIFO status register 1.  */
+#define V850E_UARTB_FIS1(n)	(*(volatile u8 *)V850E_UARTB_FIS1_ADDR(n))
+
+
+/* Slightly abstract interface used by driver.  */
+
+
+/* Interrupts used by the UART.  */
+
+/* Received when the most recently transmitted character has been sent.  */
+#define V850E_UART_TX_IRQ(chan)		IRQ_INTUBTIT (chan)
+/* Received when a new character has been received.  */
+#define V850E_UART_RX_IRQ(chan)		IRQ_INTUBTIR (chan)
+
+/* Use by serial driver for information purposes.  */
+#define V850E_UART_BASE_ADDR(chan)	V850E_UARTB_BASE_ADDR(chan)
+
+
+/* UART clock generator interface.  */
+
+/* This type encapsulates a particular uart frequency.  */
+typedef u16 v850e_uart_speed_t;
+
+/* Calculate a uart speed from BAUD for this uart.  */
+static inline v850e_uart_speed_t v850e_uart_calc_speed (unsigned baud)
+{
+	v850e_uart_speed_t speed;
+
+	/*
+	 * V850E/ME2 UARTB baud rate is determined by the value of UBCTL2
+	 * fx = V850E_UARTB_BASE_FREQ = CPU_CLOCK_FREQ/4
+	 * baud = fx / 2*speed   [ speed >= 4 ]
+	 */
+	speed = V850E_UARTB_CTL2_MIN;
+	while (((V850E_UARTB_BASE_FREQ / 2) / speed ) > baud)
+		speed++;
+
+	return speed;
+}
+
+/* Return the current speed of uart channel CHAN.  */
+#define v850e_uart_speed(chan)		    V850E_UARTB_CTL2 (chan)
+
+/* Set the current speed of uart channel CHAN.  */
+#define v850e_uart_set_speed(chan, speed)   (V850E_UARTB_CTL2 (chan) = (speed))
+
+/* Return true if SPEED1 and SPEED2 are the same.  */
+#define v850e_uart_speed_eq(speed1, speed2) ((speed1) == (speed2))
+
+/* Minimum baud rate possible.  */
+#define v850e_uart_min_baud() \
+   ((V850E_UARTB_BASE_FREQ / 2) / V850E_UARTB_CTL2_MAX)
+
+/* Maximum baud rate possible.  The error is quite high at max, though.  */
+#define v850e_uart_max_baud() \
+   ((V850E_UARTB_BASE_FREQ / 2) / V850E_UARTB_CTL2_MIN)
+
+/* The `maximum' clock rate the uart can used, which is wanted (though not
+   really used in any useful way) by the serial framework.  */
+#define v850e_uart_max_clock() \
+   (V850E_UARTB_BASE_FREQ / 2)
+
+
+/* UART configuration interface.  */
+
+/* Type of the uart config register; must be a scalar.  */
+typedef u16 v850e_uart_config_t;
+
+/* The uart hardware config register for channel CHAN.  */
+#define V850E_UART_CONFIG(chan)		V850E_UARTB_CTL0 (chan)
+
+/* This config bit set if the uart is enabled.  */
+#define V850E_UART_CONFIG_ENABLED	V850E_UARTB_CTL0_PWR
+/* If the uart _isn't_ enabled, store this value to it to do so.  */
+#define V850E_UART_CONFIG_INIT		V850E_UARTB_CTL0_PWR
+/* Store this config value to disable the uart channel completely.  */
+#define V850E_UART_CONFIG_FINI		0
+
+/* Setting/clearing these bits enable/disable TX/RX, respectively (but
+   otherwise generally leave things running).  */
+#define V850E_UART_CONFIG_RX_ENABLE	V850E_UARTB_CTL0_RXE
+#define V850E_UART_CONFIG_TX_ENABLE	V850E_UARTB_CTL0_TXE
+
+/* These masks define which config bits affect TX/RX modes, respectively.  */
+#define V850E_UART_CONFIG_RX_BITS \
+  (V850E_UARTB_CTL0_PS_MASK | V850E_UARTB_CTL0_CL_8)
+#define V850E_UART_CONFIG_TX_BITS \
+  (V850E_UARTB_CTL0_PS_MASK | V850E_UARTB_CTL0_CL_8 | V850E_UARTB_CTL0_SL_2)
+
+static inline v850e_uart_config_t v850e_uart_calc_config (unsigned cflags)
+{
+	v850e_uart_config_t config = 0;
+
+	/* Figure out new configuration of control register.  */
+	if (cflags & CSTOPB)
+		/* Number of stop bits, 1 or 2.  */
+		config |= V850E_UARTB_CTL0_SL_2;
+	if ((cflags & CSIZE) == CS8)
+		/* Number of data bits, 7 or 8.  */
+		config |= V850E_UARTB_CTL0_CL_8;
+	if (! (cflags & PARENB))
+		/* No parity check/generation.  */
+		config |= V850E_UARTB_CTL0_PS_NONE;
+	else if (cflags & PARODD)
+		/* Odd parity check/generation.  */
+		config |= V850E_UARTB_CTL0_PS_ODD;
+	else
+		/* Even parity check/generation.  */
+		config |= V850E_UARTB_CTL0_PS_EVEN;
+	if (cflags & CREAD)
+		/* Reading enabled.  */
+		config |= V850E_UARTB_CTL0_RXE;
+
+	config |= V850E_UARTB_CTL0_PWR;
+	config |= V850E_UARTB_CTL0_TXE; /* Writing is always enabled.  */
+	config |= V850E_UARTB_CTL0_DIR; /* LSB first.  */
+
+	return config;
+}
+
+/* This should delay as long as necessary for a recently written config
+   setting to settle, before we turn the uart back on.  */
+static inline void
+v850e_uart_config_delay (v850e_uart_config_t config, v850e_uart_speed_t speed)
+{
+	/* The UART may not be reset properly unless we wait at least 2
+	   `basic-clocks' until turning on the TXE/RXE bits again.
+	   A `basic clock' is the clock used by the baud-rate generator,
+	   i.e., the cpu clock divided by the 2^new_clk_divlog2.
+	   The loop takes 2 insns, so loop CYCLES / 2 times.  */
+	register unsigned count = 1 << speed;
+	while (--count != 0)
+		/* nothing */;
+}
+
+
+/* RX/TX interface.  */
+
+/* Return true if all characters awaiting transmission on uart channel N
+   have been transmitted.  */
+#define v850e_uart_xmit_done(n)						      \
+   (! (V850E_UARTB_STR(n) & V850E_UARTB_STR_TSF))
+/* Wait for this to be true.  */
+#define v850e_uart_wait_for_xmit_done(n)				      \
+   do { } while (! v850e_uart_xmit_done (n))
+
+/* Return true if uart channel N is ready to transmit a character.  */
+#define v850e_uart_xmit_ok(n)						      \
+   (v850e_uart_xmit_done(n) && v850e_uart_cts(n))
+/* Wait for this to be true.  */
+#define v850e_uart_wait_for_xmit_ok(n)					      \
+   do { } while (! v850e_uart_xmit_ok (n))
+
+/* Write character CH to uart channel CHAN.  */
+#define v850e_uart_putc(chan, ch)	(V850E_UARTB_TX(chan) = (ch))
+
+/* Return latest character read on channel CHAN.  */
+#define v850e_uart_getc(chan)		V850E_UARTB_RX (chan)
+
+/* Return bit-mask of uart error status.  */
+#define v850e_uart_err(chan)		V850E_UARTB_STR (chan)
+/* Various error bits set in the error result.  */
+#define V850E_UART_ERR_OVERRUN		V850E_UARTB_STR_OVE
+#define V850E_UART_ERR_FRAME		V850E_UARTB_STR_FE
+#define V850E_UART_ERR_PARITY		V850E_UARTB_STR_PE
+
+
+#endif /* __V850_V850E_UARTB_H__ */
diff --git a/include/asm-v850/v850e_utils.h b/include/asm-v850/v850e_utils.h
new file mode 100644
index 0000000..52eb728
--- /dev/null
+++ b/include/asm-v850/v850e_utils.h
@@ -0,0 +1,35 @@
+/*
+ * include/asm-v850/v850e_utils.h -- Utility functions associated with
+ *	V850E CPUs
+ *
+ *  Copyright (C) 2001,03  NEC Electronics Corporation
+ *  Copyright (C) 2001,03  Miles Bader <miles@gnu.org>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License.  See the file COPYING in the main directory of this
+ * archive for more details.
+ *
+ * Written by Miles Bader <miles@gnu.org>
+ */
+
+#ifndef __V850_V850E_UTILS_H__
+#define __V850_V850E_UTILS_H__
+
+/* Calculate counter clock-divider and count values to attain the
+   desired frequency RATE from the base frequency BASE_FREQ.  The
+   counter is expected to have a clock-divider, which can divide the
+   system cpu clock by a power of two value from MIN_DIVLOG2 to
+   MAX_DIV_LOG2, and a word-size of COUNTER_SIZE bits (the counter
+   counts up and resets whenever it's equal to the compare register,
+   generating an interrupt or whatever when it does so).  The returned
+   values are: *DIVLOG2 -- log2 of the desired clock divider and *COUNT
+   -- the counter compare value to use.  Returns true if it was possible
+   to find a reasonable value, otherwise false (and the other return
+   values will be set to be as good as possible).  */
+extern int calc_counter_params (unsigned long base_freq,
+				unsigned long rate,
+				unsigned min_divlog2, unsigned max_divlog2,
+				unsigned counter_size,
+				unsigned *divlog2, unsigned *count);
+
+#endif /* __V850_V850E_UTILS_H__ */