Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86: Fix compile error with CONFIG_AS_CFI=n
Documentation: document debugpat commandline option
x86: sanitize Kconfig
x86, suspend, acpi: correct and add comments about Big Real Mode
x86, suspend, acpi: enter Big Real Mode
Fixed trivial conflict in include/asm-x86/dwarf2.h due to just using
different names for "cfi_ignore" (vs "__cfi_ignore") macro.
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index b3a5aad..681d615 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -571,6 +571,8 @@
debug_objects [KNL] Enable object debugging
+ debugpat [X86] Enable PAT debugging
+
decnet.addr= [HW,NET]
Format: <area>[,<node>]
See also Documentation/networking/decnet.txt.
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 6958d6b..2642b4b 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -447,7 +447,6 @@
config MEMTEST
bool "Memtest"
depends on X86_64
- default y
help
This option adds a kernel parameter 'memtest', which allows memtest
to be set.
@@ -455,7 +454,7 @@
memtest=1, mean do 1 test pattern;
...
memtest=4, mean do 4 test patterns.
- If you are unsure how to answer this question, answer Y.
+ If you are unsure how to answer this question, answer N.
config X86_SUMMIT_NUMA
def_bool y
@@ -1135,21 +1134,18 @@
See <file:Documentation/mtrr.txt> for more information.
config MTRR_SANITIZER
- def_bool y
+ bool
prompt "MTRR cleanup support"
depends on MTRR
help
- Convert MTRR layout from continuous to discrete, so some X driver
- could add WB entries.
+ Convert MTRR layout from continuous to discrete, so X drivers can
+ add writeback entries.
- Say N here if you see bootup problems (boot crash, boot hang,
- spontaneous reboots).
+ Can be disabled with disable_mtrr_cleanup on the kernel command line.
+ The largest mtrr entry size for a continous block can be set with
+ mtrr_chunk_size.
- Could be disabled with disable_mtrr_cleanup. Also mtrr_chunk_size
- could be used to send largest mtrr entry size for continuous block
- to hold holes (aka. UC entries)
-
- If unsure, say Y.
+ If unsure, say N.
config MTRR_SANITIZER_ENABLE_DEFAULT
int "MTRR cleanup enable value (0-1)"
@@ -1166,7 +1162,7 @@
depends on MTRR_SANITIZER
help
mtrr cleanup spare entries default, it can be changed via
- mtrr_spare_reg_nr=
+ mtrr_spare_reg_nr=N on the kernel command line.
config X86_PAT
bool
diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c
index e6a4b56..793ad20 100644
--- a/arch/x86/kernel/acpi/sleep.c
+++ b/arch/x86/kernel/acpi/sleep.c
@@ -23,6 +23,15 @@
static char temp_stack[10240];
#endif
+/* XXX: this macro should move to asm-x86/segment.h and be shared with the
+ boot code... */
+#define GDT_ENTRY(flags, base, limit) \
+ (((u64)(base & 0xff000000) << 32) | \
+ ((u64)flags << 40) | \
+ ((u64)(limit & 0x00ff0000) << 32) | \
+ ((u64)(base & 0x00ffffff) << 16) | \
+ ((u64)(limit & 0x0000ffff)))
+
/**
* acpi_save_state_mem - save kernel state
*
@@ -51,18 +60,27 @@
header->video_mode = saved_video_mode;
header->wakeup_jmp_seg = acpi_wakeup_address >> 4;
+
+ /*
+ * Set up the wakeup GDT. We set these up as Big Real Mode,
+ * that is, with limits set to 4 GB. At least the Lenovo
+ * Thinkpad X61 is known to need this for the video BIOS
+ * initialization quirk to work; this is likely to also
+ * be the case for other laptops or integrated video devices.
+ */
+
/* GDT[0]: GDT self-pointer */
header->wakeup_gdt[0] =
(u64)(sizeof(header->wakeup_gdt) - 1) +
((u64)(acpi_wakeup_address +
((char *)&header->wakeup_gdt - (char *)acpi_realmode))
<< 16);
- /* GDT[1]: real-mode-like code segment */
- header->wakeup_gdt[1] = (0x009bULL << 40) +
- ((u64)acpi_wakeup_address << 16) + 0xffff;
- /* GDT[2]: real-mode-like data segment */
- header->wakeup_gdt[2] = (0x0093ULL << 40) +
- ((u64)acpi_wakeup_address << 16) + 0xffff;
+ /* GDT[1]: big real mode-like code segment */
+ header->wakeup_gdt[1] =
+ GDT_ENTRY(0x809b, acpi_wakeup_address, 0xfffff);
+ /* GDT[2]: big real mode-like data segment */
+ header->wakeup_gdt[2] =
+ GDT_ENTRY(0x8093, acpi_wakeup_address, 0xfffff);
#ifndef CONFIG_64BIT
store_gdt((struct desc_ptr *)&header->pmode_gdt);
diff --git a/include/asm-x86/dwarf2.h b/include/asm-x86/dwarf2.h
index fd4a6a0..738bb9f 100644
--- a/include/asm-x86/dwarf2.h
+++ b/include/asm-x86/dwarf2.h
@@ -38,23 +38,23 @@
/* Due to the structure of pre-exisiting code, don't use assembler line
comment character # to ignore the arguments. Instead, use a dummy macro. */
-.macro __cfi_ignore a=0, b=0, c=0, d=0
+.macro cfi_ignore a=0, b=0, c=0, d=0
.endm
-#define CFI_STARTPROC __cfi_ignore
-#define CFI_ENDPROC __cfi_ignore
-#define CFI_DEF_CFA __cfi_ignore
-#define CFI_DEF_CFA_REGISTER __cfi_ignore
-#define CFI_DEF_CFA_OFFSET __cfi_ignore
-#define CFI_ADJUST_CFA_OFFSET __cfi_ignore
-#define CFI_OFFSET __cfi_ignore
-#define CFI_REL_OFFSET __cfi_ignore
-#define CFI_REGISTER __cfi_ignore
-#define CFI_RESTORE __cfi_ignore
-#define CFI_REMEMBER_STATE __cfi_ignore
-#define CFI_RESTORE_STATE __cfi_ignore
-#define CFI_UNDEFINED __cfi_ignore
-#define CFI_SIGNAL_FRAME __cfi_ignore
+#define CFI_STARTPROC cfi_ignore
+#define CFI_ENDPROC cfi_ignore
+#define CFI_DEF_CFA cfi_ignore
+#define CFI_DEF_CFA_REGISTER cfi_ignore
+#define CFI_DEF_CFA_OFFSET cfi_ignore
+#define CFI_ADJUST_CFA_OFFSET cfi_ignore
+#define CFI_OFFSET cfi_ignore
+#define CFI_REL_OFFSET cfi_ignore
+#define CFI_REGISTER cfi_ignore
+#define CFI_RESTORE cfi_ignore
+#define CFI_REMEMBER_STATE cfi_ignore
+#define CFI_RESTORE_STATE cfi_ignore
+#define CFI_UNDEFINED cfi_ignore
+#define CFI_SIGNAL_FRAME cfi_ignore
#endif