dmaengine: at_hdmac: take maxburst from slave configuration
The maxburst/chunk size was taken from the private slave DMA data structure.
Use the common API provided by DMA_SLAVE_CONFIG to setup src/dst maxburst
values.
The ctrla field is not needed anymore in the slave private structure nor the
header constants that were located in an architecture specific directory.
The at91sam9g45_devices.c file that was using this platform data is also
modified to remove this now useless data.
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c
index c057309..7292aa8 100644
--- a/drivers/dma/at_hdmac.c
+++ b/drivers/dma/at_hdmac.c
@@ -666,7 +666,8 @@
return NULL;
}
- ctrla = atslave->ctrla;
+ ctrla = ATC_SCSIZE(sconfig->src_maxburst)
+ | ATC_DCSIZE(sconfig->dst_maxburst);
ctrlb = ATC_IEN;
switch (direction) {
@@ -794,12 +795,12 @@
enum dma_transfer_direction direction)
{
struct at_dma_chan *atchan = to_at_dma_chan(chan);
- struct at_dma_slave *atslave = chan->private;
struct dma_slave_config *sconfig = &atchan->dma_sconfig;
u32 ctrla;
/* prepare common CRTLA value */
- ctrla = atslave->ctrla
+ ctrla = ATC_SCSIZE(sconfig->src_maxburst)
+ | ATC_DCSIZE(sconfig->dst_maxburst)
| ATC_DST_WIDTH(reg_width)
| ATC_SRC_WIDTH(reg_width)
| period_len >> reg_width;
diff --git a/drivers/dma/at_hdmac_regs.h b/drivers/dma/at_hdmac_regs.h
index 897a8bc..8a6c8e8 100644
--- a/drivers/dma/at_hdmac_regs.h
+++ b/drivers/dma/at_hdmac_regs.h
@@ -87,7 +87,26 @@
/* Bitfields in CTRLA */
#define ATC_BTSIZE_MAX 0xFFFFUL /* Maximum Buffer Transfer Size */
#define ATC_BTSIZE(x) (ATC_BTSIZE_MAX & (x)) /* Buffer Transfer Size */
-/* Chunck Tranfer size definitions are in at_hdmac.h */
+#define ATC_SCSIZE_MASK (0x7 << 16) /* Source Chunk Transfer Size */
+#define ATC_SCSIZE(x) (ATC_SCSIZE_MASK & ((x) << 16))
+#define ATC_SCSIZE_1 (0x0 << 16)
+#define ATC_SCSIZE_4 (0x1 << 16)
+#define ATC_SCSIZE_8 (0x2 << 16)
+#define ATC_SCSIZE_16 (0x3 << 16)
+#define ATC_SCSIZE_32 (0x4 << 16)
+#define ATC_SCSIZE_64 (0x5 << 16)
+#define ATC_SCSIZE_128 (0x6 << 16)
+#define ATC_SCSIZE_256 (0x7 << 16)
+#define ATC_DCSIZE_MASK (0x7 << 20) /* Destination Chunk Transfer Size */
+#define ATC_DCSIZE(x) (ATC_DCSIZE_MASK & ((x) << 20))
+#define ATC_DCSIZE_1 (0x0 << 20)
+#define ATC_DCSIZE_4 (0x1 << 20)
+#define ATC_DCSIZE_8 (0x2 << 20)
+#define ATC_DCSIZE_16 (0x3 << 20)
+#define ATC_DCSIZE_32 (0x4 << 20)
+#define ATC_DCSIZE_64 (0x5 << 20)
+#define ATC_DCSIZE_128 (0x6 << 20)
+#define ATC_DCSIZE_256 (0x7 << 20)
#define ATC_SRC_WIDTH_MASK (0x3 << 24) /* Source Single Transfer Size */
#define ATC_SRC_WIDTH(x) ((x) << 24)
#define ATC_SRC_WIDTH_BYTE (0x0 << 24)