[media] ARM: davinci: da850 evm: Add EVM specific code for VPIF to work
Include the expander settings to select VPIF peripheral on
UI card and add registration call in EVM init. Also add platform
data to configure display and capture devices.
Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com>
Signed-off-by: Lad, Prabhakar <prabhakar.lad@ti.com>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig
index ab99c3c..026b4b2 100644
--- a/arch/arm/mach-davinci/Kconfig
+++ b/arch/arm/mach-davinci/Kconfig
@@ -186,6 +186,13 @@
NOTE: Please take care while choosing this option, MII PHY will
not be functional if RMII mode is selected.
+config DA850_UI_SD_VIDEO_PORT
+ bool "Video Port Interface"
+ help
+ Say Y if you want to use Video Port Interface (VPIF) on the
+ DA850/OMAP-L138 EVM. The Video decoders/encoders are found on the
+ UI daughter card that is supplied with the EVM.
+
endchoice
config DA850_WL12XX
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index 0149fb4..d0954a2 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -45,6 +45,8 @@
#include <mach/aemif.h>
#include <mach/spi.h>
+#include <media/tvp514x.h>
+
#define DA850_EVM_PHY_ID "davinci_mdio-0:00"
#define DA850_LCD_PWR_PIN GPIO_TO_PIN(2, 8)
#define DA850_LCD_BL_PIN GPIO_TO_PIN(2, 15)
@@ -452,6 +454,15 @@
}
}
+#ifdef CONFIG_DA850_UI_SD_VIDEO_PORT
+static inline void da850_evm_setup_video_port(int video_sel)
+{
+ gpio_set_value_cansleep(video_sel, 0);
+}
+#else
+static inline void da850_evm_setup_video_port(int video_sel) { }
+#endif
+
static int da850_evm_ui_expander_setup(struct i2c_client *client, unsigned gpio,
unsigned ngpio, void *c)
{
@@ -497,6 +508,8 @@
da850_evm_setup_emac_rmii(sel_a);
+ da850_evm_setup_video_port(sel_c);
+
return 0;
exp_setup_keys_fail:
@@ -1149,6 +1162,147 @@
static __init int da850_evm_init_cpufreq(void) { return 0; }
#endif
+#if defined(CONFIG_DA850_UI_SD_VIDEO_PORT)
+
+#define TVP5147_CH0 "tvp514x-0"
+#define TVP5147_CH1 "tvp514x-1"
+
+/* VPIF capture configuration */
+static struct tvp514x_platform_data tvp5146_pdata = {
+ .clk_polarity = 0,
+ .hs_polarity = 1,
+ .vs_polarity = 1,
+};
+
+#define TVP514X_STD_ALL (V4L2_STD_NTSC | V4L2_STD_PAL)
+
+static const struct vpif_input da850_ch0_inputs[] = {
+ {
+ .input = {
+ .index = 0,
+ .name = "Composite",
+ .type = V4L2_INPUT_TYPE_CAMERA,
+ .std = TVP514X_STD_ALL,
+ },
+ .subdev_name = TVP5147_CH0,
+ },
+};
+
+static const struct vpif_input da850_ch1_inputs[] = {
+ {
+ .input = {
+ .index = 0,
+ .name = "S-Video",
+ .type = V4L2_INPUT_TYPE_CAMERA,
+ .std = TVP514X_STD_ALL,
+ },
+ .subdev_name = TVP5147_CH1,
+ },
+};
+
+static struct vpif_subdev_info da850_vpif_capture_sdev_info[] = {
+ {
+ .name = TVP5147_CH0,
+ .board_info = {
+ I2C_BOARD_INFO("tvp5146", 0x5d),
+ .platform_data = &tvp5146_pdata,
+ },
+ .input = INPUT_CVBS_VI2B,
+ .output = OUTPUT_10BIT_422_EMBEDDED_SYNC,
+ .can_route = 1,
+ .vpif_if = {
+ .if_type = VPIF_IF_BT656,
+ .hd_pol = 1,
+ .vd_pol = 1,
+ .fid_pol = 0,
+ },
+ },
+ {
+ .name = TVP5147_CH1,
+ .board_info = {
+ I2C_BOARD_INFO("tvp5146", 0x5c),
+ .platform_data = &tvp5146_pdata,
+ },
+ .input = INPUT_SVIDEO_VI2C_VI1C,
+ .output = OUTPUT_10BIT_422_EMBEDDED_SYNC,
+ .can_route = 1,
+ .vpif_if = {
+ .if_type = VPIF_IF_BT656,
+ .hd_pol = 1,
+ .vd_pol = 1,
+ .fid_pol = 0,
+ },
+ },
+};
+
+static struct vpif_capture_config da850_vpif_capture_config = {
+ .subdev_info = da850_vpif_capture_sdev_info,
+ .subdev_count = ARRAY_SIZE(da850_vpif_capture_sdev_info),
+ .chan_config[0] = {
+ .inputs = da850_ch0_inputs,
+ .input_count = ARRAY_SIZE(da850_ch0_inputs),
+ },
+ .chan_config[1] = {
+ .inputs = da850_ch1_inputs,
+ .input_count = ARRAY_SIZE(da850_ch1_inputs),
+ },
+ .card_name = "DA850/OMAP-L138 Video Capture",
+};
+
+/* VPIF display configuration */
+static struct vpif_subdev_info da850_vpif_subdev[] = {
+ {
+ .name = "adv7343",
+ .board_info = {
+ I2C_BOARD_INFO("adv7343", 0x2a),
+ },
+ },
+};
+
+static const char const *vpif_output[] = {
+ "Composite",
+ "S-Video",
+};
+
+static struct vpif_display_config da850_vpif_display_config = {
+ .subdevinfo = da850_vpif_subdev,
+ .subdev_count = ARRAY_SIZE(da850_vpif_subdev),
+ .output = vpif_output,
+ .output_count = ARRAY_SIZE(vpif_output),
+ .card_name = "DA850/OMAP-L138 Video Display",
+};
+
+static __init void da850_vpif_init(void)
+{
+ int ret;
+
+ ret = da850_register_vpif();
+ if (ret)
+ pr_warn("da850_evm_init: VPIF setup failed: %d\n", ret);
+
+ ret = davinci_cfg_reg_list(da850_vpif_capture_pins);
+ if (ret)
+ pr_warn("da850_evm_init: VPIF capture mux setup failed: %d\n",
+ ret);
+
+ ret = da850_register_vpif_capture(&da850_vpif_capture_config);
+ if (ret)
+ pr_warn("da850_evm_init: VPIF capture setup failed: %d\n", ret);
+
+ ret = davinci_cfg_reg_list(da850_vpif_display_pins);
+ if (ret)
+ pr_warn("da850_evm_init: VPIF display mux setup failed: %d\n",
+ ret);
+
+ ret = da850_register_vpif_display(&da850_vpif_display_config);
+ if (ret)
+ pr_warn("da850_evm_init: VPIF display setup failed: %d\n", ret);
+}
+
+#else
+static __init void da850_vpif_init(void) {}
+#endif
+
#ifdef CONFIG_DA850_WL12XX
static void wl12xx_set_power(int index, bool power_on)
@@ -1375,6 +1529,8 @@
pr_warning("da850_evm_init: suspend registration failed: %d\n",
ret);
+ da850_vpif_init();
+
ret = da8xx_register_spi(1, da850evm_spi_info,
ARRAY_SIZE(da850evm_spi_info));
if (ret)