[PATCH] telephony: fix-up schedule_timeout() usage
Use schedule_timeout_uninterruptible() instead of
set_current_state()/schedule_timeout() to reduce kernel size.
Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
diff --git a/drivers/telephony/ixj.c b/drivers/telephony/ixj.c
index 9585d48..f670468 100644
--- a/drivers/telephony/ixj.c
+++ b/drivers/telephony/ixj.c
@@ -2071,8 +2071,7 @@
j->flags.ringing = 0;
return 1;
}
- set_current_state(TASK_INTERRUPTIBLE);
- schedule_timeout(1);
+ schedule_timeout_interruptible(1);
if (signal_pending(current))
break;
}
@@ -2086,8 +2085,7 @@
return 1;
}
}
- set_current_state(TASK_INTERRUPTIBLE);
- schedule_timeout(1);
+ schedule_timeout_interruptible(1);
if (signal_pending(current))
break;
}
@@ -2153,10 +2151,8 @@
* Set up locks to ensure that only one process is talking to the DSP at a time.
* This is necessary to keep the DSP from locking up.
*/
- while(test_and_set_bit(board, (void *)&j->busyflags) != 0) {
- set_current_state(TASK_INTERRUPTIBLE);
- schedule_timeout(1);
- }
+ while(test_and_set_bit(board, (void *)&j->busyflags) != 0)
+ schedule_timeout_interruptible(1);
if (ixjdebug & 0x0002)
printk(KERN_INFO "Closing board %d\n", NUM(inode));
@@ -3286,14 +3282,10 @@
ixj_play_tone(j, 23);
clear_bit(j->board, &j->busyflags);
- while(j->tone_state) {
- set_current_state(TASK_INTERRUPTIBLE);
- schedule_timeout(1);
- }
- while(test_and_set_bit(j->board, (void *)&j->busyflags) != 0) {
- set_current_state(TASK_INTERRUPTIBLE);
- schedule_timeout(1);
- }
+ while(j->tone_state)
+ schedule_timeout_interruptible(1);
+ while(test_and_set_bit(j->board, (void *)&j->busyflags) != 0)
+ schedule_timeout_interruptible(1);
if(ixjdebug & 0x0200) {
printk("IXJ cidcw phone%d first tone end at %ld\n", j->board, jiffies);
}
@@ -3313,14 +3305,10 @@
ixj_play_tone(j, 24);
clear_bit(j->board, &j->busyflags);
- while(j->tone_state) {
- set_current_state(TASK_INTERRUPTIBLE);
- schedule_timeout(1);
- }
- while(test_and_set_bit(j->board, (void *)&j->busyflags) != 0) {
- set_current_state(TASK_INTERRUPTIBLE);
- schedule_timeout(1);
- }
+ while(j->tone_state)
+ schedule_timeout_interruptible(1);
+ while(test_and_set_bit(j->board, (void *)&j->busyflags) != 0)
+ schedule_timeout_interruptible(1);
if(ixjdebug & 0x0200) {
printk("IXJ cidcw phone%d sent second tone at %ld\n", j->board, jiffies);
}
@@ -3328,14 +3316,10 @@
j->cidcw_wait = jiffies + ((50 * hertz) / 100);
clear_bit(j->board, &j->busyflags);
- while(!j->flags.cidcw_ack && time_before(jiffies, j->cidcw_wait)) {
- set_current_state(TASK_INTERRUPTIBLE);
- schedule_timeout(1);
- }
- while(test_and_set_bit(j->board, (void *)&j->busyflags) != 0) {
- set_current_state(TASK_INTERRUPTIBLE);
- schedule_timeout(1);
- }
+ while(!j->flags.cidcw_ack && time_before(jiffies, j->cidcw_wait))
+ schedule_timeout_interruptible(1);
+ while(test_and_set_bit(j->board, (void *)&j->busyflags) != 0)
+ schedule_timeout_interruptible(1);
j->cidcw_wait = 0;
if(!j->flags.cidcw_ack) {
if(ixjdebug & 0x0200) {
@@ -6110,10 +6094,8 @@
* Set up locks to ensure that only one process is talking to the DSP at a time.
* This is necessary to keep the DSP from locking up.
*/
- while(test_and_set_bit(board, (void *)&j->busyflags) != 0) {
- set_current_state(TASK_INTERRUPTIBLE);
- schedule_timeout(1);
- }
+ while(test_and_set_bit(board, (void *)&j->busyflags) != 0)
+ schedule_timeout_interruptible(1);
if (ixjdebug & 0x0040)
printk("phone%d ioctl, cmd: 0x%x, arg: 0x%lx\n", minor, cmd, arg);
if (minor >= IXJMAX) {