DMA: shdma: add r8a73a4 DMAC data to the device ID table
This configuration data will be used, when DMAC DT support is added to
r8a73a4.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
diff --git a/drivers/dma/sh/shdma-r8a73a4.c b/drivers/dma/sh/shdma-r8a73a4.c
new file mode 100644
index 0000000..4fb9997
--- /dev/null
+++ b/drivers/dma/sh/shdma-r8a73a4.c
@@ -0,0 +1,77 @@
+/*
+ * Renesas SuperH DMA Engine support for r8a73a4 (APE6) SoCs
+ *
+ * Copyright (C) 2013 Renesas Electronics, Inc.
+ *
+ * This is free software; you can redistribute it and/or modify it under the
+ * terms of version 2 the GNU General Public License as published by the Free
+ * Software Foundation.
+ */
+#include <linux/sh_dma.h>
+
+#include "shdma-arm.h"
+
+const unsigned int dma_ts_shift[] = SH_DMAE_TS_SHIFT;
+
+static const struct sh_dmae_slave_config dma_slaves[] = {
+ {
+ .chcr = CHCR_TX(XMIT_SZ_32BIT),
+ .mid_rid = 0xd1, /* MMC0 Tx */
+ }, {
+ .chcr = CHCR_RX(XMIT_SZ_32BIT),
+ .mid_rid = 0xd2, /* MMC0 Rx */
+ }, {
+ .chcr = CHCR_TX(XMIT_SZ_32BIT),
+ .mid_rid = 0xe1, /* MMC1 Tx */
+ }, {
+ .chcr = CHCR_RX(XMIT_SZ_32BIT),
+ .mid_rid = 0xe2, /* MMC1 Rx */
+ },
+};
+
+#define DMAE_CHANNEL(a, b) \
+ { \
+ .offset = (a) - 0x20, \
+ .dmars = (a) - 0x20 + 0x40, \
+ .chclr_bit = (b), \
+ .chclr_offset = 0x80 - 0x20, \
+ }
+
+static const struct sh_dmae_channel dma_channels[] = {
+ DMAE_CHANNEL(0x8000, 0),
+ DMAE_CHANNEL(0x8080, 1),
+ DMAE_CHANNEL(0x8100, 2),
+ DMAE_CHANNEL(0x8180, 3),
+ DMAE_CHANNEL(0x8200, 4),
+ DMAE_CHANNEL(0x8280, 5),
+ DMAE_CHANNEL(0x8300, 6),
+ DMAE_CHANNEL(0x8380, 7),
+ DMAE_CHANNEL(0x8400, 8),
+ DMAE_CHANNEL(0x8480, 9),
+ DMAE_CHANNEL(0x8500, 10),
+ DMAE_CHANNEL(0x8580, 11),
+ DMAE_CHANNEL(0x8600, 12),
+ DMAE_CHANNEL(0x8680, 13),
+ DMAE_CHANNEL(0x8700, 14),
+ DMAE_CHANNEL(0x8780, 15),
+ DMAE_CHANNEL(0x8800, 16),
+ DMAE_CHANNEL(0x8880, 17),
+ DMAE_CHANNEL(0x8900, 18),
+ DMAE_CHANNEL(0x8980, 19),
+};
+
+const struct sh_dmae_pdata r8a73a4_dma_pdata = {
+ .slave = dma_slaves,
+ .slave_num = ARRAY_SIZE(dma_slaves),
+ .channel = dma_channels,
+ .channel_num = ARRAY_SIZE(dma_channels),
+ .ts_low_shift = TS_LOW_SHIFT,
+ .ts_low_mask = TS_LOW_BIT << TS_LOW_SHIFT,
+ .ts_high_shift = TS_HI_SHIFT,
+ .ts_high_mask = TS_HI_BIT << TS_HI_SHIFT,
+ .ts_shift = dma_ts_shift,
+ .ts_shift_num = ARRAY_SIZE(dma_ts_shift),
+ .dmaor_init = DMAOR_DME,
+ .chclr_present = 1,
+ .chclr_bitwise = 1,
+};