| /* |
| * Copyright (C) 2008 Nokia Corporation |
| * |
| * Based on lirc_serial.c |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License as published by |
| * the Free Software Foundation; either version 2 of the License, or |
| * (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA |
| * |
| */ |
| |
| #include <linux/module.h> |
| #include <linux/interrupt.h> |
| #include <linux/uaccess.h> |
| #include <linux/platform_device.h> |
| #include <linux/sched.h> |
| #include <linux/wait.h> |
| |
| #include <plat/dmtimer.h> |
| #include <plat/clock.h> |
| |
| #include <media/lirc.h> |
| #include <media/lirc_dev.h> |
| #include <media/ir-rx51.h> |
| |
| #define LIRC_RX51_DRIVER_FEATURES (LIRC_CAN_SET_SEND_DUTY_CYCLE | \ |
| LIRC_CAN_SET_SEND_CARRIER | \ |
| LIRC_CAN_SEND_PULSE) |
| |
| #define DRIVER_NAME "lirc_rx51" |
| |
| #define WBUF_LEN 256 |
| |
| #define TIMER_MAX_VALUE 0xffffffff |
| |
| struct lirc_rx51 { |
| struct omap_dm_timer *pwm_timer; |
| struct omap_dm_timer *pulse_timer; |
| struct device *dev; |
| struct lirc_rx51_platform_data *pdata; |
| wait_queue_head_t wqueue; |
| |
| unsigned long fclk_khz; |
| unsigned int freq; /* carrier frequency */ |
| unsigned int duty_cycle; /* carrier duty cycle */ |
| unsigned int irq_num; |
| unsigned int match; |
| int wbuf[WBUF_LEN]; |
| int wbuf_index; |
| unsigned long device_is_open; |
| int pwm_timer_num; |
| }; |
| |
| static void lirc_rx51_on(struct lirc_rx51 *lirc_rx51) |
| { |
| omap_dm_timer_set_pwm(lirc_rx51->pwm_timer, 0, 1, |
| OMAP_TIMER_TRIGGER_OVERFLOW_AND_COMPARE); |
| } |
| |
| static void lirc_rx51_off(struct lirc_rx51 *lirc_rx51) |
| { |
| omap_dm_timer_set_pwm(lirc_rx51->pwm_timer, 0, 1, |
| OMAP_TIMER_TRIGGER_NONE); |
| } |
| |
| static int init_timing_params(struct lirc_rx51 *lirc_rx51) |
| { |
| u32 load, match; |
| |
| load = -(lirc_rx51->fclk_khz * 1000 / lirc_rx51->freq); |
| match = -(lirc_rx51->duty_cycle * -load / 100); |
| omap_dm_timer_set_load(lirc_rx51->pwm_timer, 1, load); |
| omap_dm_timer_set_match(lirc_rx51->pwm_timer, 1, match); |
| omap_dm_timer_write_counter(lirc_rx51->pwm_timer, TIMER_MAX_VALUE - 2); |
| omap_dm_timer_start(lirc_rx51->pwm_timer); |
| omap_dm_timer_set_int_enable(lirc_rx51->pulse_timer, 0); |
| omap_dm_timer_start(lirc_rx51->pulse_timer); |
| |
| lirc_rx51->match = 0; |
| |
| return 0; |
| } |
| |
| #define tics_after(a, b) ((long)(b) - (long)(a) < 0) |
| |
| static int pulse_timer_set_timeout(struct lirc_rx51 *lirc_rx51, int usec) |
| { |
| int counter; |
| |
| BUG_ON(usec < 0); |
| |
| if (lirc_rx51->match == 0) |
| counter = omap_dm_timer_read_counter(lirc_rx51->pulse_timer); |
| else |
| counter = lirc_rx51->match; |
| |
| counter += (u32)(lirc_rx51->fclk_khz * usec / (1000)); |
| omap_dm_timer_set_match(lirc_rx51->pulse_timer, 1, counter); |
| omap_dm_timer_set_int_enable(lirc_rx51->pulse_timer, |
| OMAP_TIMER_INT_MATCH); |
| if (tics_after(omap_dm_timer_read_counter(lirc_rx51->pulse_timer), |
| counter)) { |
| return 1; |
| } |
| return 0; |
| } |
| |
| static irqreturn_t lirc_rx51_interrupt_handler(int irq, void *ptr) |
| { |
| unsigned int retval; |
| struct lirc_rx51 *lirc_rx51 = ptr; |
| |
| retval = omap_dm_timer_read_status(lirc_rx51->pulse_timer); |
| if (!retval) |
| return IRQ_NONE; |
| |
| if (retval & ~OMAP_TIMER_INT_MATCH) |
| dev_err_ratelimited(lirc_rx51->dev, |
| ": Unexpected interrupt source: %x\n", retval); |
| |
| omap_dm_timer_write_status(lirc_rx51->pulse_timer, |
| OMAP_TIMER_INT_MATCH | |
| OMAP_TIMER_INT_OVERFLOW | |
| OMAP_TIMER_INT_CAPTURE); |
| if (lirc_rx51->wbuf_index < 0) { |
| dev_err_ratelimited(lirc_rx51->dev, |
| ": BUG wbuf_index has value of %i\n", |
| lirc_rx51->wbuf_index); |
| goto end; |
| } |
| |
| /* |
| * If we happen to hit an odd latency spike, loop through the |
| * pulses until we catch up. |
| */ |
| do { |
| if (lirc_rx51->wbuf_index >= WBUF_LEN) |
| goto end; |
| if (lirc_rx51->wbuf[lirc_rx51->wbuf_index] == -1) |
| goto end; |
| |
| if (lirc_rx51->wbuf_index % 2) |
| lirc_rx51_off(lirc_rx51); |
| else |
| lirc_rx51_on(lirc_rx51); |
| |
| retval = pulse_timer_set_timeout(lirc_rx51, |
| lirc_rx51->wbuf[lirc_rx51->wbuf_index]); |
| lirc_rx51->wbuf_index++; |
| |
| } while (retval); |
| |
| return IRQ_HANDLED; |
| end: |
| /* Stop TX here */ |
| lirc_rx51_off(lirc_rx51); |
| lirc_rx51->wbuf_index = -1; |
| omap_dm_timer_stop(lirc_rx51->pwm_timer); |
| omap_dm_timer_stop(lirc_rx51->pulse_timer); |
| omap_dm_timer_set_int_enable(lirc_rx51->pulse_timer, 0); |
| wake_up_interruptible(&lirc_rx51->wqueue); |
| |
| return IRQ_HANDLED; |
| } |
| |
| static int lirc_rx51_init_port(struct lirc_rx51 *lirc_rx51) |
| { |
| struct clk *clk_fclk; |
| int retval, pwm_timer = lirc_rx51->pwm_timer_num; |
| |
| lirc_rx51->pwm_timer = omap_dm_timer_request_specific(pwm_timer); |
| if (lirc_rx51->pwm_timer == NULL) { |
| dev_err(lirc_rx51->dev, ": Error requesting GPT%d timer\n", |
| pwm_timer); |
| return -EBUSY; |
| } |
| |
| lirc_rx51->pulse_timer = omap_dm_timer_request(); |
| if (lirc_rx51->pulse_timer == NULL) { |
| dev_err(lirc_rx51->dev, ": Error requesting pulse timer\n"); |
| retval = -EBUSY; |
| goto err1; |
| } |
| |
| omap_dm_timer_set_source(lirc_rx51->pwm_timer, OMAP_TIMER_SRC_SYS_CLK); |
| omap_dm_timer_set_source(lirc_rx51->pulse_timer, |
| OMAP_TIMER_SRC_SYS_CLK); |
| |
| omap_dm_timer_enable(lirc_rx51->pwm_timer); |
| omap_dm_timer_enable(lirc_rx51->pulse_timer); |
| |
| lirc_rx51->irq_num = omap_dm_timer_get_irq(lirc_rx51->pulse_timer); |
| retval = request_irq(lirc_rx51->irq_num, lirc_rx51_interrupt_handler, |
| IRQF_DISABLED | IRQF_SHARED, |
| "lirc_pulse_timer", lirc_rx51); |
| if (retval) { |
| dev_err(lirc_rx51->dev, ": Failed to request interrupt line\n"); |
| goto err2; |
| } |
| |
| clk_fclk = omap_dm_timer_get_fclk(lirc_rx51->pwm_timer); |
| lirc_rx51->fclk_khz = clk_fclk->rate / 1000; |
| |
| return 0; |
| |
| err2: |
| omap_dm_timer_free(lirc_rx51->pulse_timer); |
| err1: |
| omap_dm_timer_free(lirc_rx51->pwm_timer); |
| |
| return retval; |
| } |
| |
| static int lirc_rx51_free_port(struct lirc_rx51 *lirc_rx51) |
| { |
| omap_dm_timer_set_int_enable(lirc_rx51->pulse_timer, 0); |
| free_irq(lirc_rx51->irq_num, lirc_rx51); |
| lirc_rx51_off(lirc_rx51); |
| omap_dm_timer_disable(lirc_rx51->pwm_timer); |
| omap_dm_timer_disable(lirc_rx51->pulse_timer); |
| omap_dm_timer_free(lirc_rx51->pwm_timer); |
| omap_dm_timer_free(lirc_rx51->pulse_timer); |
| lirc_rx51->wbuf_index = -1; |
| |
| return 0; |
| } |
| |
| static ssize_t lirc_rx51_write(struct file *file, const char *buf, |
| size_t n, loff_t *ppos) |
| { |
| int count, i; |
| struct lirc_rx51 *lirc_rx51 = file->private_data; |
| |
| if (n % sizeof(int)) |
| return -EINVAL; |
| |
| count = n / sizeof(int); |
| if ((count > WBUF_LEN) || (count % 2 == 0)) |
| return -EINVAL; |
| |
| /* Wait any pending transfers to finish */ |
| wait_event_interruptible(lirc_rx51->wqueue, lirc_rx51->wbuf_index < 0); |
| |
| if (copy_from_user(lirc_rx51->wbuf, buf, n)) |
| return -EFAULT; |
| |
| /* Sanity check the input pulses */ |
| for (i = 0; i < count; i++) |
| if (lirc_rx51->wbuf[i] < 0) |
| return -EINVAL; |
| |
| init_timing_params(lirc_rx51); |
| if (count < WBUF_LEN) |
| lirc_rx51->wbuf[count] = -1; /* Insert termination mark */ |
| |
| /* |
| * Adjust latency requirements so the device doesn't go in too |
| * deep sleep states |
| */ |
| lirc_rx51->pdata->set_max_mpu_wakeup_lat(lirc_rx51->dev, 50); |
| |
| lirc_rx51_on(lirc_rx51); |
| lirc_rx51->wbuf_index = 1; |
| pulse_timer_set_timeout(lirc_rx51, lirc_rx51->wbuf[0]); |
| |
| /* |
| * Don't return back to the userspace until the transfer has |
| * finished |
| */ |
| wait_event_interruptible(lirc_rx51->wqueue, lirc_rx51->wbuf_index < 0); |
| |
| /* We can sleep again */ |
| lirc_rx51->pdata->set_max_mpu_wakeup_lat(lirc_rx51->dev, -1); |
| |
| return n; |
| } |
| |
| static long lirc_rx51_ioctl(struct file *filep, |
| unsigned int cmd, unsigned long arg) |
| { |
| int result; |
| unsigned long value; |
| unsigned int ivalue; |
| struct lirc_rx51 *lirc_rx51 = filep->private_data; |
| |
| switch (cmd) { |
| case LIRC_GET_SEND_MODE: |
| result = put_user(LIRC_MODE_PULSE, (unsigned long *)arg); |
| if (result) |
| return result; |
| break; |
| |
| case LIRC_SET_SEND_MODE: |
| result = get_user(value, (unsigned long *)arg); |
| if (result) |
| return result; |
| |
| /* only LIRC_MODE_PULSE supported */ |
| if (value != LIRC_MODE_PULSE) |
| return -ENOSYS; |
| break; |
| |
| case LIRC_GET_REC_MODE: |
| result = put_user(0, (unsigned long *) arg); |
| if (result) |
| return result; |
| break; |
| |
| case LIRC_GET_LENGTH: |
| return -ENOSYS; |
| break; |
| |
| case LIRC_SET_SEND_DUTY_CYCLE: |
| result = get_user(ivalue, (unsigned int *) arg); |
| if (result) |
| return result; |
| |
| if (ivalue <= 0 || ivalue > 100) { |
| dev_err(lirc_rx51->dev, ": invalid duty cycle %d\n", |
| ivalue); |
| return -EINVAL; |
| } |
| |
| lirc_rx51->duty_cycle = ivalue; |
| break; |
| |
| case LIRC_SET_SEND_CARRIER: |
| result = get_user(ivalue, (unsigned int *) arg); |
| if (result) |
| return result; |
| |
| if (ivalue > 500000 || ivalue < 20000) { |
| dev_err(lirc_rx51->dev, ": invalid carrier freq %d\n", |
| ivalue); |
| return -EINVAL; |
| } |
| |
| lirc_rx51->freq = ivalue; |
| break; |
| |
| case LIRC_GET_FEATURES: |
| result = put_user(LIRC_RX51_DRIVER_FEATURES, |
| (unsigned long *) arg); |
| if (result) |
| return result; |
| break; |
| |
| default: |
| return -ENOIOCTLCMD; |
| } |
| |
| return 0; |
| } |
| |
| static int lirc_rx51_open(struct inode *inode, struct file *file) |
| { |
| struct lirc_rx51 *lirc_rx51 = lirc_get_pdata(file); |
| BUG_ON(!lirc_rx51); |
| |
| file->private_data = lirc_rx51; |
| |
| if (test_and_set_bit(1, &lirc_rx51->device_is_open)) |
| return -EBUSY; |
| |
| return lirc_rx51_init_port(lirc_rx51); |
| } |
| |
| static int lirc_rx51_release(struct inode *inode, struct file *file) |
| { |
| struct lirc_rx51 *lirc_rx51 = file->private_data; |
| |
| lirc_rx51_free_port(lirc_rx51); |
| |
| clear_bit(1, &lirc_rx51->device_is_open); |
| |
| return 0; |
| } |
| |
| static struct lirc_rx51 lirc_rx51 = { |
| .freq = 38000, |
| .duty_cycle = 50, |
| .wbuf_index = -1, |
| }; |
| |
| static const struct file_operations lirc_fops = { |
| .owner = THIS_MODULE, |
| .write = lirc_rx51_write, |
| .unlocked_ioctl = lirc_rx51_ioctl, |
| .read = lirc_dev_fop_read, |
| .poll = lirc_dev_fop_poll, |
| .open = lirc_rx51_open, |
| .release = lirc_rx51_release, |
| }; |
| |
| static struct lirc_driver lirc_rx51_driver = { |
| .name = DRIVER_NAME, |
| .minor = -1, |
| .code_length = 1, |
| .data = &lirc_rx51, |
| .fops = &lirc_fops, |
| .owner = THIS_MODULE, |
| }; |
| |
| #ifdef CONFIG_PM |
| |
| static int lirc_rx51_suspend(struct platform_device *dev, pm_message_t state) |
| { |
| /* |
| * In case the device is still open, do not suspend. Normally |
| * this should not be a problem as lircd only keeps the device |
| * open only for short periods of time. We also don't want to |
| * get involved with race conditions that might happen if we |
| * were in a middle of a transmit. Thus, we defer any suspend |
| * actions until transmit has completed. |
| */ |
| if (test_and_set_bit(1, &lirc_rx51.device_is_open)) |
| return -EAGAIN; |
| |
| clear_bit(1, &lirc_rx51.device_is_open); |
| |
| return 0; |
| } |
| |
| static int lirc_rx51_resume(struct platform_device *dev) |
| { |
| return 0; |
| } |
| |
| #else |
| |
| #define lirc_rx51_suspend NULL |
| #define lirc_rx51_resume NULL |
| |
| #endif /* CONFIG_PM */ |
| |
| static int lirc_rx51_probe(struct platform_device *dev) |
| { |
| lirc_rx51_driver.features = LIRC_RX51_DRIVER_FEATURES; |
| lirc_rx51.pdata = dev->dev.platform_data; |
| lirc_rx51.pwm_timer_num = lirc_rx51.pdata->pwm_timer; |
| lirc_rx51.dev = &dev->dev; |
| lirc_rx51_driver.dev = &dev->dev; |
| lirc_rx51_driver.minor = lirc_register_driver(&lirc_rx51_driver); |
| init_waitqueue_head(&lirc_rx51.wqueue); |
| |
| if (lirc_rx51_driver.minor < 0) { |
| dev_err(lirc_rx51.dev, ": lirc_register_driver failed: %d\n", |
| lirc_rx51_driver.minor); |
| return lirc_rx51_driver.minor; |
| } |
| dev_info(lirc_rx51.dev, "registration ok, minor: %d, pwm: %d\n", |
| lirc_rx51_driver.minor, lirc_rx51.pwm_timer_num); |
| |
| return 0; |
| } |
| |
| static int __exit lirc_rx51_remove(struct platform_device *dev) |
| { |
| return lirc_unregister_driver(lirc_rx51_driver.minor); |
| } |
| |
| struct platform_driver lirc_rx51_platform_driver = { |
| .probe = lirc_rx51_probe, |
| .remove = __exit_p(lirc_rx51_remove), |
| .suspend = lirc_rx51_suspend, |
| .resume = lirc_rx51_resume, |
| .driver = { |
| .name = DRIVER_NAME, |
| .owner = THIS_MODULE, |
| }, |
| }; |
| module_platform_driver(lirc_rx51_platform_driver); |
| |
| MODULE_DESCRIPTION("LIRC TX driver for Nokia RX51"); |
| MODULE_AUTHOR("Nokia Corporation"); |
| MODULE_LICENSE("GPL"); |