| /* Copyright (c) 2018-2019, The Linux Foundation. All rights reserved. |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 and |
| * only version 2 as published by the Free Software Foundation. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| */ |
| |
| #include "sdxpoorwills.dtsi" |
| #include "sdxpoorwills-pinctrl.dtsi" |
| #include "sdxpoorwills-cdp-audio-overlay.dtsi" |
| |
| &serial_uart { |
| status = "ok"; |
| }; |
| |
| &qnand_1 { |
| status = "ok"; |
| }; |
| |
| &sdhc_1 { |
| vdd-supply = <&vreg_sd_mmc>; |
| |
| vdd-io-supply = <&pmxpoorwills_l7>; |
| qcom,vdd-io-voltage-level = <1800000 2950000>; |
| qcom,vdd-io-current-level = <200 10000>; |
| |
| pinctrl-names = "active", "sleep"; |
| pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on &sdc1_cd_on>; |
| pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off &sdc1_cd_off>; |
| |
| qcom,clk-rates = <400000 20000000 25000000 50000000 100000000 |
| 200000000>; |
| qcom,devfreq,freq-table = <50000000 200000000>; |
| |
| cd-gpios = <&tlmm 93 0x1>; |
| |
| status = "ok"; |
| }; |
| |
| &pmxpoorwills_vadc { |
| chan@83 { |
| label = "vph_pwr"; |
| reg = <0x83>; |
| qcom,decimation = <2>; |
| qcom,pre-div-channel-scaling = <1>; |
| qcom,calibration-type = "absolute"; |
| qcom,scale-function = <0>; |
| qcom,hw-settle-time = <0>; |
| qcom,fast-avg-setup = <0>; |
| }; |
| |
| chan@4c { |
| label = "xo_therm"; |
| reg = <0x4c>; |
| qcom,decimation = <2>; |
| qcom,pre-div-channel-scaling = <0>; |
| qcom,calibration-type = "ratiometric"; |
| qcom,scale-function = <4>; |
| qcom,hw-settle-time = <2>; |
| qcom,fast-avg-setup = <0>; |
| qcom,vadc-thermal-node; |
| }; |
| |
| chan@4d { |
| label = "pa_therm1"; |
| reg = <0x4d>; |
| qcom,decimation = <2>; |
| qcom,pre-div-channel-scaling = <0>; |
| qcom,calibration-type = "ratiometric"; |
| qcom,scale-function = <2>; |
| qcom,hw-settle-time = <2>; |
| qcom,fast-avg-setup = <0>; |
| qcom,vadc-thermal-node; |
| }; |
| |
| chan@4e { |
| label = "pa_therm2"; |
| reg = <0x4e>; |
| qcom,decimation = <2>; |
| qcom,pre-div-channel-scaling = <0>; |
| qcom,calibration-type = "ratiometric"; |
| qcom,scale-function = <2>; |
| qcom,hw-settle-time = <2>; |
| qcom,fast-avg-setup = <0>; |
| qcom,vadc-thermal-node; |
| }; |
| |
| chan@4f { |
| label = "mdm_case_therm"; |
| reg = <0x4f>; |
| qcom,decimation = <2>; |
| qcom,pre-div-channel-scaling = <0>; |
| qcom,calibration-type = "ratiometric"; |
| qcom,scale-function = <2>; |
| qcom,hw-settle-time = <2>; |
| qcom,fast-avg-setup = <0>; |
| qcom,vadc-thermal-node; |
| }; |
| |
| chan@52 { |
| label = "ambient_therm"; |
| reg = <0x52>; |
| qcom,decimation = <2>; |
| qcom,pre-div-channel-scaling = <0>; |
| qcom,calibration-type = "ratiometric"; |
| qcom,scale-function = <2>; |
| qcom,hw-settle-time = <2>; |
| qcom,fast-avg-setup = <0>; |
| qcom,vadc-thermal-node; |
| }; |
| }; |
| |
| &i2c_3 { |
| status = "okay"; |
| #include "smb138x.dtsi" |
| }; |
| |
| &smb138x { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&smb_int_default>; |
| interrupt-parent = <&tlmm>; |
| interrupts = <42 IRQ_TYPE_LEVEL_LOW>; |
| |
| smb1381_charger: qcom,smb1381-charger@1000 { |
| compatible = "qcom,smb138x-charger"; |
| qcom,use-extcon; |
| dpdm-supply = <&usb2_phy>; |
| }; |
| }; |
| |
| &smb138x_vbus { |
| status = "okay"; |
| }; |
| |
| &usb { |
| status = "okay"; |
| extcon = <&smb1381_charger>; |
| vbus_dwc3-supply = <&smb138x_vbus>; |
| }; |
| |
| &soc { |
| bluetooth: bt_qca6174 { |
| compatible = "qca,qca6174"; |
| qca,bt-reset-gpio = <&pmxpoorwills_gpios 4 0>; /* BT_EN */ |
| qca,bt-vdd-pa-supply = <&vreg_wlan>; |
| }; |
| }; |