x86: x86 i387 cleanup
This removes all the old code that is no longer used after
the i387 unification and cleanup. The i387_64.h is renamed
to i387.h with no changes, but since it replaces the nonempty
one-line stub i387.h it looks like a big diff and not a rename.
Signed-off-by: Roland McGrath <roland@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
diff --git a/include/asm-x86/i387.h b/include/asm-x86/i387.h
index b2bc005..de435b9 100644
--- a/include/asm-x86/i387.h
+++ b/include/asm-x86/i387.h
@@ -1 +1,374 @@
-#include "i387_64.h"
+/*
+ * Copyright (C) 1994 Linus Torvalds
+ *
+ * Pentium III FXSR, SSE support
+ * General FPU state handling cleanups
+ * Gareth Hughes <gareth@valinux.com>, May 2000
+ * x86-64 work by Andi Kleen 2002
+ */
+
+#ifndef _ASM_X86_I387_H
+#define _ASM_X86_I387_H
+
+#include <linux/sched.h>
+#include <linux/kernel_stat.h>
+#include <linux/regset.h>
+#include <asm/processor.h>
+#include <asm/sigcontext.h>
+#include <asm/user.h>
+#include <asm/uaccess.h>
+
+extern void fpu_init(void);
+extern unsigned int mxcsr_feature_mask;
+extern void mxcsr_feature_mask_init(void);
+extern void init_fpu(struct task_struct *child);
+extern asmlinkage void math_state_restore(void);
+
+extern user_regset_active_fn fpregs_active, xfpregs_active;
+extern user_regset_get_fn fpregs_get, xfpregs_get, fpregs_soft_get;
+extern user_regset_set_fn fpregs_set, xfpregs_set, fpregs_soft_set;
+
+#ifdef CONFIG_IA32_EMULATION
+struct _fpstate_ia32;
+extern int save_i387_ia32(struct _fpstate_ia32 __user *buf);
+extern int restore_i387_ia32(struct _fpstate_ia32 __user *buf);
+#endif
+
+#ifdef CONFIG_X86_64
+
+/* Ignore delayed exceptions from user space */
+static inline void tolerant_fwait(void)
+{
+ asm volatile("1: fwait\n"
+ "2:\n"
+ " .section __ex_table,\"a\"\n"
+ " .align 8\n"
+ " .quad 1b,2b\n"
+ " .previous\n");
+}
+
+static inline int restore_fpu_checking(struct i387_fxsave_struct *fx)
+{
+ int err;
+
+ asm volatile("1: rex64/fxrstor (%[fx])\n\t"
+ "2:\n"
+ ".section .fixup,\"ax\"\n"
+ "3: movl $-1,%[err]\n"
+ " jmp 2b\n"
+ ".previous\n"
+ ".section __ex_table,\"a\"\n"
+ " .align 8\n"
+ " .quad 1b,3b\n"
+ ".previous"
+ : [err] "=r" (err)
+#if 0 /* See comment in __save_init_fpu() below. */
+ : [fx] "r" (fx), "m" (*fx), "0" (0));
+#else
+ : [fx] "cdaSDb" (fx), "m" (*fx), "0" (0));
+#endif
+ if (unlikely(err))
+ init_fpu(current);
+ return err;
+}
+
+#define X87_FSW_ES (1 << 7) /* Exception Summary */
+
+/* AMD CPUs don't save/restore FDP/FIP/FOP unless an exception
+ is pending. Clear the x87 state here by setting it to fixed
+ values. The kernel data segment can be sometimes 0 and sometimes
+ new user value. Both should be ok.
+ Use the PDA as safe address because it should be already in L1. */
+static inline void clear_fpu_state(struct i387_fxsave_struct *fx)
+{
+ if (unlikely(fx->swd & X87_FSW_ES))
+ asm volatile("fnclex");
+ alternative_input(ASM_NOP8 ASM_NOP2,
+ " emms\n" /* clear stack tags */
+ " fildl %%gs:0", /* load to clear state */
+ X86_FEATURE_FXSAVE_LEAK);
+}
+
+static inline int save_i387_checking(struct i387_fxsave_struct __user *fx)
+{
+ int err;
+
+ asm volatile("1: rex64/fxsave (%[fx])\n\t"
+ "2:\n"
+ ".section .fixup,\"ax\"\n"
+ "3: movl $-1,%[err]\n"
+ " jmp 2b\n"
+ ".previous\n"
+ ".section __ex_table,\"a\"\n"
+ " .align 8\n"
+ " .quad 1b,3b\n"
+ ".previous"
+ : [err] "=r" (err), "=m" (*fx)
+#if 0 /* See comment in __fxsave_clear() below. */
+ : [fx] "r" (fx), "0" (0));
+#else
+ : [fx] "cdaSDb" (fx), "0" (0));
+#endif
+ if (unlikely(err) && __clear_user(fx, sizeof(struct i387_fxsave_struct)))
+ err = -EFAULT;
+ /* No need to clear here because the caller clears USED_MATH */
+ return err;
+}
+
+static inline void __save_init_fpu(struct task_struct *tsk)
+{
+ /* Using "rex64; fxsave %0" is broken because, if the memory operand
+ uses any extended registers for addressing, a second REX prefix
+ will be generated (to the assembler, rex64 followed by semicolon
+ is a separate instruction), and hence the 64-bitness is lost. */
+#if 0
+ /* Using "fxsaveq %0" would be the ideal choice, but is only supported
+ starting with gas 2.16. */
+ __asm__ __volatile__("fxsaveq %0"
+ : "=m" (tsk->thread.i387.fxsave));
+#elif 0
+ /* Using, as a workaround, the properly prefixed form below isn't
+ accepted by any binutils version so far released, complaining that
+ the same type of prefix is used twice if an extended register is
+ needed for addressing (fix submitted to mainline 2005-11-21). */
+ __asm__ __volatile__("rex64/fxsave %0"
+ : "=m" (tsk->thread.i387.fxsave));
+#else
+ /* This, however, we can work around by forcing the compiler to select
+ an addressing mode that doesn't require extended registers. */
+ __asm__ __volatile__("rex64/fxsave %P2(%1)"
+ : "=m" (tsk->thread.i387.fxsave)
+ : "cdaSDb" (tsk),
+ "i" (offsetof(__typeof__(*tsk),
+ thread.i387.fxsave)));
+#endif
+ clear_fpu_state(&tsk->thread.i387.fxsave);
+ task_thread_info(tsk)->status &= ~TS_USEDFPU;
+}
+
+/*
+ * Signal frame handlers.
+ */
+
+static inline int save_i387(struct _fpstate __user *buf)
+{
+ struct task_struct *tsk = current;
+ int err = 0;
+
+ BUILD_BUG_ON(sizeof(struct user_i387_struct) !=
+ sizeof(tsk->thread.i387.fxsave));
+
+ if ((unsigned long)buf % 16)
+ printk("save_i387: bad fpstate %p\n", buf);
+
+ if (!used_math())
+ return 0;
+ clear_used_math(); /* trigger finit */
+ if (task_thread_info(tsk)->status & TS_USEDFPU) {
+ err = save_i387_checking((struct i387_fxsave_struct __user *)buf);
+ if (err) return err;
+ task_thread_info(tsk)->status &= ~TS_USEDFPU;
+ stts();
+ } else {
+ if (__copy_to_user(buf, &tsk->thread.i387.fxsave,
+ sizeof(struct i387_fxsave_struct)))
+ return -1;
+ }
+ return 1;
+}
+
+/*
+ * This restores directly out of user space. Exceptions are handled.
+ */
+static inline int restore_i387(struct _fpstate __user *buf)
+{
+ set_used_math();
+ if (!(task_thread_info(current)->status & TS_USEDFPU)) {
+ clts();
+ task_thread_info(current)->status |= TS_USEDFPU;
+ }
+ return restore_fpu_checking((__force struct i387_fxsave_struct *)buf);
+}
+
+#else /* CONFIG_X86_32 */
+
+static inline void tolerant_fwait(void)
+{
+ asm volatile("fnclex ; fwait");
+}
+
+static inline void restore_fpu(struct task_struct *tsk)
+{
+ /*
+ * The "nop" is needed to make the instructions the same
+ * length.
+ */
+ alternative_input(
+ "nop ; frstor %1",
+ "fxrstor %1",
+ X86_FEATURE_FXSR,
+ "m" ((tsk)->thread.i387.fxsave));
+}
+
+/* We need a safe address that is cheap to find and that is already
+ in L1 during context switch. The best choices are unfortunately
+ different for UP and SMP */
+#ifdef CONFIG_SMP
+#define safe_address (__per_cpu_offset[0])
+#else
+#define safe_address (kstat_cpu(0).cpustat.user)
+#endif
+
+/*
+ * These must be called with preempt disabled
+ */
+static inline void __save_init_fpu(struct task_struct *tsk)
+{
+ /* Use more nops than strictly needed in case the compiler
+ varies code */
+ alternative_input(
+ "fnsave %[fx] ;fwait;" GENERIC_NOP8 GENERIC_NOP4,
+ "fxsave %[fx]\n"
+ "bt $7,%[fsw] ; jnc 1f ; fnclex\n1:",
+ X86_FEATURE_FXSR,
+ [fx] "m" (tsk->thread.i387.fxsave),
+ [fsw] "m" (tsk->thread.i387.fxsave.swd) : "memory");
+ /* AMD K7/K8 CPUs don't save/restore FDP/FIP/FOP unless an exception
+ is pending. Clear the x87 state here by setting it to fixed
+ values. safe_address is a random variable that should be in L1 */
+ alternative_input(
+ GENERIC_NOP8 GENERIC_NOP2,
+ "emms\n\t" /* clear stack tags */
+ "fildl %[addr]", /* set F?P to defined value */
+ X86_FEATURE_FXSAVE_LEAK,
+ [addr] "m" (safe_address));
+ task_thread_info(tsk)->status &= ~TS_USEDFPU;
+}
+
+/*
+ * Signal frame handlers...
+ */
+extern int save_i387(struct _fpstate __user *buf);
+extern int restore_i387(struct _fpstate __user *buf);
+
+#endif /* CONFIG_X86_64 */
+
+static inline void __unlazy_fpu(struct task_struct *tsk)
+{
+ if (task_thread_info(tsk)->status & TS_USEDFPU) {
+ __save_init_fpu(tsk);
+ stts();
+ } else
+ tsk->fpu_counter = 0;
+}
+
+static inline void __clear_fpu(struct task_struct *tsk)
+{
+ if (task_thread_info(tsk)->status & TS_USEDFPU) {
+ tolerant_fwait();
+ task_thread_info(tsk)->status &= ~TS_USEDFPU;
+ stts();
+ }
+}
+
+static inline void kernel_fpu_begin(void)
+{
+ struct thread_info *me = current_thread_info();
+ preempt_disable();
+ if (me->status & TS_USEDFPU)
+ __save_init_fpu(me->task);
+ else
+ clts();
+}
+
+static inline void kernel_fpu_end(void)
+{
+ stts();
+ preempt_enable();
+}
+
+#ifdef CONFIG_X86_64
+
+static inline void save_init_fpu(struct task_struct *tsk)
+{
+ __save_init_fpu(tsk);
+ stts();
+}
+
+#define unlazy_fpu __unlazy_fpu
+#define clear_fpu __clear_fpu
+
+#else /* CONFIG_X86_32 */
+
+/*
+ * These disable preemption on their own and are safe
+ */
+static inline void save_init_fpu(struct task_struct *tsk)
+{
+ preempt_disable();
+ __save_init_fpu(tsk);
+ stts();
+ preempt_enable();
+}
+
+static inline void unlazy_fpu(struct task_struct *tsk)
+{
+ preempt_disable();
+ __unlazy_fpu(tsk);
+ preempt_enable();
+}
+
+static inline void clear_fpu(struct task_struct *tsk)
+{
+ preempt_disable();
+ __clear_fpu(tsk);
+ preempt_enable();
+}
+
+#endif /* CONFIG_X86_64 */
+
+/*
+ * ptrace request handlers...
+ */
+extern int get_fpregs(struct user_i387_struct __user *buf,
+ struct task_struct *tsk);
+extern int set_fpregs(struct task_struct *tsk,
+ struct user_i387_struct __user *buf);
+
+struct user_fxsr_struct;
+extern int get_fpxregs(struct user_fxsr_struct __user *buf,
+ struct task_struct *tsk);
+extern int set_fpxregs(struct task_struct *tsk,
+ struct user_fxsr_struct __user *buf);
+
+/*
+ * i387 state interaction
+ */
+static inline unsigned short get_fpu_cwd(struct task_struct *tsk)
+{
+ if (cpu_has_fxsr) {
+ return tsk->thread.i387.fxsave.cwd;
+ } else {
+ return (unsigned short)tsk->thread.i387.fsave.cwd;
+ }
+}
+
+static inline unsigned short get_fpu_swd(struct task_struct *tsk)
+{
+ if (cpu_has_fxsr) {
+ return tsk->thread.i387.fxsave.swd;
+ } else {
+ return (unsigned short)tsk->thread.i387.fsave.swd;
+ }
+}
+
+static inline unsigned short get_fpu_mxcsr(struct task_struct *tsk)
+{
+ if (cpu_has_xmm) {
+ return tsk->thread.i387.fxsave.mxcsr;
+ } else {
+ return MXCSR_DEFAULT;
+ }
+}
+
+#endif /* _ASM_X86_I387_H */
diff --git a/include/asm-x86/i387_32.h b/include/asm-x86/i387_32.h
deleted file mode 100644
index 9ac2502..0000000
--- a/include/asm-x86/i387_32.h
+++ /dev/null
@@ -1,149 +0,0 @@
-/*
- * Copyright (C) 1994 Linus Torvalds
- *
- * Pentium III FXSR, SSE support
- * General FPU state handling cleanups
- * Gareth Hughes <gareth@valinux.com>, May 2000
- */
-
-#ifndef __ASM_I386_I387_H
-#define __ASM_I386_I387_H
-
-#include <linux/sched.h>
-#include <linux/init.h>
-#include <linux/kernel_stat.h>
-#include <asm/processor.h>
-#include <asm/sigcontext.h>
-#include <asm/user.h>
-
-extern void mxcsr_feature_mask_init(void);
-extern void init_fpu(struct task_struct *);
-
-/*
- * FPU lazy state save handling...
- */
-
-/*
- * The "nop" is needed to make the instructions the same
- * length.
- */
-#define restore_fpu(tsk) \
- alternative_input( \
- "nop ; frstor %1", \
- "fxrstor %1", \
- X86_FEATURE_FXSR, \
- "m" ((tsk)->thread.i387.fxsave))
-
-extern void kernel_fpu_begin(void);
-#define kernel_fpu_end() do { stts(); preempt_enable(); } while(0)
-
-/* We need a safe address that is cheap to find and that is already
- in L1 during context switch. The best choices are unfortunately
- different for UP and SMP */
-#ifdef CONFIG_SMP
-#define safe_address (__per_cpu_offset[0])
-#else
-#define safe_address (kstat_cpu(0).cpustat.user)
-#endif
-
-/*
- * These must be called with preempt disabled
- */
-static inline void __save_init_fpu( struct task_struct *tsk )
-{
- /* Use more nops than strictly needed in case the compiler
- varies code */
- alternative_input(
- "fnsave %[fx] ;fwait;" GENERIC_NOP8 GENERIC_NOP4,
- "fxsave %[fx]\n"
- "bt $7,%[fsw] ; jnc 1f ; fnclex\n1:",
- X86_FEATURE_FXSR,
- [fx] "m" (tsk->thread.i387.fxsave),
- [fsw] "m" (tsk->thread.i387.fxsave.swd) : "memory");
- /* AMD K7/K8 CPUs don't save/restore FDP/FIP/FOP unless an exception
- is pending. Clear the x87 state here by setting it to fixed
- values. safe_address is a random variable that should be in L1 */
- alternative_input(
- GENERIC_NOP8 GENERIC_NOP2,
- "emms\n\t" /* clear stack tags */
- "fildl %[addr]", /* set F?P to defined value */
- X86_FEATURE_FXSAVE_LEAK,
- [addr] "m" (safe_address));
- task_thread_info(tsk)->status &= ~TS_USEDFPU;
-}
-
-#define __unlazy_fpu( tsk ) do { \
- if (task_thread_info(tsk)->status & TS_USEDFPU) { \
- __save_init_fpu(tsk); \
- stts(); \
- } else \
- tsk->fpu_counter = 0; \
-} while (0)
-
-#define __clear_fpu( tsk ) \
-do { \
- if (task_thread_info(tsk)->status & TS_USEDFPU) { \
- asm volatile("fnclex ; fwait"); \
- task_thread_info(tsk)->status &= ~TS_USEDFPU; \
- stts(); \
- } \
-} while (0)
-
-
-/*
- * These disable preemption on their own and are safe
- */
-static inline void save_init_fpu( struct task_struct *tsk )
-{
- preempt_disable();
- __save_init_fpu(tsk);
- stts();
- preempt_enable();
-}
-
-#define unlazy_fpu( tsk ) do { \
- preempt_disable(); \
- __unlazy_fpu(tsk); \
- preempt_enable(); \
-} while (0)
-
-#define clear_fpu( tsk ) do { \
- preempt_disable(); \
- __clear_fpu( tsk ); \
- preempt_enable(); \
-} while (0)
-
-/*
- * FPU state interaction...
- */
-extern unsigned short get_fpu_cwd( struct task_struct *tsk );
-extern unsigned short get_fpu_swd( struct task_struct *tsk );
-extern unsigned short get_fpu_mxcsr( struct task_struct *tsk );
-extern asmlinkage void math_state_restore(void);
-
-/*
- * Signal frame handlers...
- */
-extern int save_i387( struct _fpstate __user *buf );
-extern int restore_i387( struct _fpstate __user *buf );
-
-/*
- * ptrace request handers...
- */
-extern int get_fpregs( struct user_i387_struct __user *buf,
- struct task_struct *tsk );
-extern int set_fpregs( struct task_struct *tsk,
- struct user_i387_struct __user *buf );
-
-extern int get_fpxregs( struct user_fxsr_struct __user *buf,
- struct task_struct *tsk );
-extern int set_fpxregs( struct task_struct *tsk,
- struct user_fxsr_struct __user *buf );
-
-/*
- * FPU state for core dumps...
- */
-extern int dump_fpu( struct pt_regs *regs,
- struct user_i387_struct *fpu );
-
-#endif /* __ASM_I386_I387_H */
diff --git a/include/asm-x86/i387_64.h b/include/asm-x86/i387_64.h
deleted file mode 100644
index de435b9..0000000
--- a/include/asm-x86/i387_64.h
+++ /dev/null
@@ -1,374 +0,0 @@
-/*
- * Copyright (C) 1994 Linus Torvalds
- *
- * Pentium III FXSR, SSE support
- * General FPU state handling cleanups
- * Gareth Hughes <gareth@valinux.com>, May 2000
- * x86-64 work by Andi Kleen 2002
- */
-
-#ifndef _ASM_X86_I387_H
-#define _ASM_X86_I387_H
-
-#include <linux/sched.h>
-#include <linux/kernel_stat.h>
-#include <linux/regset.h>
-#include <asm/processor.h>
-#include <asm/sigcontext.h>
-#include <asm/user.h>
-#include <asm/uaccess.h>
-
-extern void fpu_init(void);
-extern unsigned int mxcsr_feature_mask;
-extern void mxcsr_feature_mask_init(void);
-extern void init_fpu(struct task_struct *child);
-extern asmlinkage void math_state_restore(void);
-
-extern user_regset_active_fn fpregs_active, xfpregs_active;
-extern user_regset_get_fn fpregs_get, xfpregs_get, fpregs_soft_get;
-extern user_regset_set_fn fpregs_set, xfpregs_set, fpregs_soft_set;
-
-#ifdef CONFIG_IA32_EMULATION
-struct _fpstate_ia32;
-extern int save_i387_ia32(struct _fpstate_ia32 __user *buf);
-extern int restore_i387_ia32(struct _fpstate_ia32 __user *buf);
-#endif
-
-#ifdef CONFIG_X86_64
-
-/* Ignore delayed exceptions from user space */
-static inline void tolerant_fwait(void)
-{
- asm volatile("1: fwait\n"
- "2:\n"
- " .section __ex_table,\"a\"\n"
- " .align 8\n"
- " .quad 1b,2b\n"
- " .previous\n");
-}
-
-static inline int restore_fpu_checking(struct i387_fxsave_struct *fx)
-{
- int err;
-
- asm volatile("1: rex64/fxrstor (%[fx])\n\t"
- "2:\n"
- ".section .fixup,\"ax\"\n"
- "3: movl $-1,%[err]\n"
- " jmp 2b\n"
- ".previous\n"
- ".section __ex_table,\"a\"\n"
- " .align 8\n"
- " .quad 1b,3b\n"
- ".previous"
- : [err] "=r" (err)
-#if 0 /* See comment in __save_init_fpu() below. */
- : [fx] "r" (fx), "m" (*fx), "0" (0));
-#else
- : [fx] "cdaSDb" (fx), "m" (*fx), "0" (0));
-#endif
- if (unlikely(err))
- init_fpu(current);
- return err;
-}
-
-#define X87_FSW_ES (1 << 7) /* Exception Summary */
-
-/* AMD CPUs don't save/restore FDP/FIP/FOP unless an exception
- is pending. Clear the x87 state here by setting it to fixed
- values. The kernel data segment can be sometimes 0 and sometimes
- new user value. Both should be ok.
- Use the PDA as safe address because it should be already in L1. */
-static inline void clear_fpu_state(struct i387_fxsave_struct *fx)
-{
- if (unlikely(fx->swd & X87_FSW_ES))
- asm volatile("fnclex");
- alternative_input(ASM_NOP8 ASM_NOP2,
- " emms\n" /* clear stack tags */
- " fildl %%gs:0", /* load to clear state */
- X86_FEATURE_FXSAVE_LEAK);
-}
-
-static inline int save_i387_checking(struct i387_fxsave_struct __user *fx)
-{
- int err;
-
- asm volatile("1: rex64/fxsave (%[fx])\n\t"
- "2:\n"
- ".section .fixup,\"ax\"\n"
- "3: movl $-1,%[err]\n"
- " jmp 2b\n"
- ".previous\n"
- ".section __ex_table,\"a\"\n"
- " .align 8\n"
- " .quad 1b,3b\n"
- ".previous"
- : [err] "=r" (err), "=m" (*fx)
-#if 0 /* See comment in __fxsave_clear() below. */
- : [fx] "r" (fx), "0" (0));
-#else
- : [fx] "cdaSDb" (fx), "0" (0));
-#endif
- if (unlikely(err) && __clear_user(fx, sizeof(struct i387_fxsave_struct)))
- err = -EFAULT;
- /* No need to clear here because the caller clears USED_MATH */
- return err;
-}
-
-static inline void __save_init_fpu(struct task_struct *tsk)
-{
- /* Using "rex64; fxsave %0" is broken because, if the memory operand
- uses any extended registers for addressing, a second REX prefix
- will be generated (to the assembler, rex64 followed by semicolon
- is a separate instruction), and hence the 64-bitness is lost. */
-#if 0
- /* Using "fxsaveq %0" would be the ideal choice, but is only supported
- starting with gas 2.16. */
- __asm__ __volatile__("fxsaveq %0"
- : "=m" (tsk->thread.i387.fxsave));
-#elif 0
- /* Using, as a workaround, the properly prefixed form below isn't
- accepted by any binutils version so far released, complaining that
- the same type of prefix is used twice if an extended register is
- needed for addressing (fix submitted to mainline 2005-11-21). */
- __asm__ __volatile__("rex64/fxsave %0"
- : "=m" (tsk->thread.i387.fxsave));
-#else
- /* This, however, we can work around by forcing the compiler to select
- an addressing mode that doesn't require extended registers. */
- __asm__ __volatile__("rex64/fxsave %P2(%1)"
- : "=m" (tsk->thread.i387.fxsave)
- : "cdaSDb" (tsk),
- "i" (offsetof(__typeof__(*tsk),
- thread.i387.fxsave)));
-#endif
- clear_fpu_state(&tsk->thread.i387.fxsave);
- task_thread_info(tsk)->status &= ~TS_USEDFPU;
-}
-
-/*
- * Signal frame handlers.
- */
-
-static inline int save_i387(struct _fpstate __user *buf)
-{
- struct task_struct *tsk = current;
- int err = 0;
-
- BUILD_BUG_ON(sizeof(struct user_i387_struct) !=
- sizeof(tsk->thread.i387.fxsave));
-
- if ((unsigned long)buf % 16)
- printk("save_i387: bad fpstate %p\n", buf);
-
- if (!used_math())
- return 0;
- clear_used_math(); /* trigger finit */
- if (task_thread_info(tsk)->status & TS_USEDFPU) {
- err = save_i387_checking((struct i387_fxsave_struct __user *)buf);
- if (err) return err;
- task_thread_info(tsk)->status &= ~TS_USEDFPU;
- stts();
- } else {
- if (__copy_to_user(buf, &tsk->thread.i387.fxsave,
- sizeof(struct i387_fxsave_struct)))
- return -1;
- }
- return 1;
-}
-
-/*
- * This restores directly out of user space. Exceptions are handled.
- */
-static inline int restore_i387(struct _fpstate __user *buf)
-{
- set_used_math();
- if (!(task_thread_info(current)->status & TS_USEDFPU)) {
- clts();
- task_thread_info(current)->status |= TS_USEDFPU;
- }
- return restore_fpu_checking((__force struct i387_fxsave_struct *)buf);
-}
-
-#else /* CONFIG_X86_32 */
-
-static inline void tolerant_fwait(void)
-{
- asm volatile("fnclex ; fwait");
-}
-
-static inline void restore_fpu(struct task_struct *tsk)
-{
- /*
- * The "nop" is needed to make the instructions the same
- * length.
- */
- alternative_input(
- "nop ; frstor %1",
- "fxrstor %1",
- X86_FEATURE_FXSR,
- "m" ((tsk)->thread.i387.fxsave));
-}
-
-/* We need a safe address that is cheap to find and that is already
- in L1 during context switch. The best choices are unfortunately
- different for UP and SMP */
-#ifdef CONFIG_SMP
-#define safe_address (__per_cpu_offset[0])
-#else
-#define safe_address (kstat_cpu(0).cpustat.user)
-#endif
-
-/*
- * These must be called with preempt disabled
- */
-static inline void __save_init_fpu(struct task_struct *tsk)
-{
- /* Use more nops than strictly needed in case the compiler
- varies code */
- alternative_input(
- "fnsave %[fx] ;fwait;" GENERIC_NOP8 GENERIC_NOP4,
- "fxsave %[fx]\n"
- "bt $7,%[fsw] ; jnc 1f ; fnclex\n1:",
- X86_FEATURE_FXSR,
- [fx] "m" (tsk->thread.i387.fxsave),
- [fsw] "m" (tsk->thread.i387.fxsave.swd) : "memory");
- /* AMD K7/K8 CPUs don't save/restore FDP/FIP/FOP unless an exception
- is pending. Clear the x87 state here by setting it to fixed
- values. safe_address is a random variable that should be in L1 */
- alternative_input(
- GENERIC_NOP8 GENERIC_NOP2,
- "emms\n\t" /* clear stack tags */
- "fildl %[addr]", /* set F?P to defined value */
- X86_FEATURE_FXSAVE_LEAK,
- [addr] "m" (safe_address));
- task_thread_info(tsk)->status &= ~TS_USEDFPU;
-}
-
-/*
- * Signal frame handlers...
- */
-extern int save_i387(struct _fpstate __user *buf);
-extern int restore_i387(struct _fpstate __user *buf);
-
-#endif /* CONFIG_X86_64 */
-
-static inline void __unlazy_fpu(struct task_struct *tsk)
-{
- if (task_thread_info(tsk)->status & TS_USEDFPU) {
- __save_init_fpu(tsk);
- stts();
- } else
- tsk->fpu_counter = 0;
-}
-
-static inline void __clear_fpu(struct task_struct *tsk)
-{
- if (task_thread_info(tsk)->status & TS_USEDFPU) {
- tolerant_fwait();
- task_thread_info(tsk)->status &= ~TS_USEDFPU;
- stts();
- }
-}
-
-static inline void kernel_fpu_begin(void)
-{
- struct thread_info *me = current_thread_info();
- preempt_disable();
- if (me->status & TS_USEDFPU)
- __save_init_fpu(me->task);
- else
- clts();
-}
-
-static inline void kernel_fpu_end(void)
-{
- stts();
- preempt_enable();
-}
-
-#ifdef CONFIG_X86_64
-
-static inline void save_init_fpu(struct task_struct *tsk)
-{
- __save_init_fpu(tsk);
- stts();
-}
-
-#define unlazy_fpu __unlazy_fpu
-#define clear_fpu __clear_fpu
-
-#else /* CONFIG_X86_32 */
-
-/*
- * These disable preemption on their own and are safe
- */
-static inline void save_init_fpu(struct task_struct *tsk)
-{
- preempt_disable();
- __save_init_fpu(tsk);
- stts();
- preempt_enable();
-}
-
-static inline void unlazy_fpu(struct task_struct *tsk)
-{
- preempt_disable();
- __unlazy_fpu(tsk);
- preempt_enable();
-}
-
-static inline void clear_fpu(struct task_struct *tsk)
-{
- preempt_disable();
- __clear_fpu(tsk);
- preempt_enable();
-}
-
-#endif /* CONFIG_X86_64 */
-
-/*
- * ptrace request handlers...
- */
-extern int get_fpregs(struct user_i387_struct __user *buf,
- struct task_struct *tsk);
-extern int set_fpregs(struct task_struct *tsk,
- struct user_i387_struct __user *buf);
-
-struct user_fxsr_struct;
-extern int get_fpxregs(struct user_fxsr_struct __user *buf,
- struct task_struct *tsk);
-extern int set_fpxregs(struct task_struct *tsk,
- struct user_fxsr_struct __user *buf);
-
-/*
- * i387 state interaction
- */
-static inline unsigned short get_fpu_cwd(struct task_struct *tsk)
-{
- if (cpu_has_fxsr) {
- return tsk->thread.i387.fxsave.cwd;
- } else {
- return (unsigned short)tsk->thread.i387.fsave.cwd;
- }
-}
-
-static inline unsigned short get_fpu_swd(struct task_struct *tsk)
-{
- if (cpu_has_fxsr) {
- return tsk->thread.i387.fxsave.swd;
- } else {
- return (unsigned short)tsk->thread.i387.fsave.swd;
- }
-}
-
-static inline unsigned short get_fpu_mxcsr(struct task_struct *tsk)
-{
- if (cpu_has_xmm) {
- return tsk->thread.i387.fxsave.mxcsr;
- } else {
- return MXCSR_DEFAULT;
- }
-}
-
-#endif /* _ASM_X86_I387_H */