[netdrvr] Remove long-unused bits from Becker template drivers

Symbols such as PCI_USES_IO, PCI_ADDR0, etc. originated from Donald
Becker's net driver template, but have been long unused.  Remove.

In a few drivers, this allows the further eliminate of the pci_flags (or
just plain flags) member in the template driver probe structure.

Most of this logic is simply open-coded in most drivers, since it never
changes.

Made a few other cleanups while I was in there, too:
* constify, __devinitdata several PCI ID tables
* replace table terminating entries such as "{0,}," and "{NULL},"
  with a more-clean "{ }".

Signed-off-by: Jeff Garzik <jeff@garzik.org>
diff --git a/drivers/net/yellowfin.c b/drivers/net/yellowfin.c
index ecec8e5..569305f 100644
--- a/drivers/net/yellowfin.c
+++ b/drivers/net/yellowfin.c
@@ -234,14 +234,6 @@
 
 
 
-enum pci_id_flags_bits {
-	/* Set PCI command register bits before calling probe1(). */
-	PCI_USES_IO=1, PCI_USES_MEM=2, PCI_USES_MASTER=4,
-	/* Read and map the single following PCI BAR. */
-	PCI_ADDR0=0<<4, PCI_ADDR1=1<<4, PCI_ADDR2=2<<4, PCI_ADDR3=3<<4,
-	PCI_ADDR_64BITS=0x100, PCI_NO_ACPI_WAKE=0x200, PCI_NO_MIN_LATENCY=0x400,
-	PCI_UNUSED_IRQ=0x800,
-};
 enum capability_flags {
 	HasMII=1, FullTxStatus=2, IsGigabit=4, HasMulticastBug=8, FullRxStatus=16,
 	HasMACAddrBug=32, /* Only on early revs.  */
@@ -249,11 +241,6 @@
 };
 /* The PCI I/O space extent. */
 #define YELLOWFIN_SIZE 0x100
-#ifdef USE_IO_OPS
-#define PCI_IOTYPE (PCI_USES_MASTER | PCI_USES_IO  | PCI_ADDR0)
-#else
-#define PCI_IOTYPE (PCI_USES_MASTER | PCI_USES_MEM | PCI_ADDR1)
-#endif
 
 struct pci_id_info {
         const char *name;
@@ -261,24 +248,23 @@
                 int     pci, pci_mask, subsystem, subsystem_mask;
                 int revision, revision_mask;                            /* Only 8 bits. */
         } id;
-        enum pci_id_flags_bits pci_flags;
         int io_size;                            /* Needed for I/O region check or ioremap(). */
         int drv_flags;                          /* Driver use, intended as capability flags. */
 };
 
 static const struct pci_id_info pci_id_tbl[] = {
 	{"Yellowfin G-NIC Gigabit Ethernet", { 0x07021000, 0xffffffff},
-	 PCI_IOTYPE, YELLOWFIN_SIZE,
+	 YELLOWFIN_SIZE,
 	 FullTxStatus | IsGigabit | HasMulticastBug | HasMACAddrBug | DontUseEeprom},
 	{"Symbios SYM83C885", { 0x07011000, 0xffffffff},
-	 PCI_IOTYPE, YELLOWFIN_SIZE, HasMII | DontUseEeprom },
-	{NULL,},
+	 YELLOWFIN_SIZE, HasMII | DontUseEeprom },
+	{ }
 };
 
-static struct pci_device_id yellowfin_pci_tbl[] = {
+static const struct pci_device_id yellowfin_pci_tbl[] = {
 	{ 0x1000, 0x0702, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
 	{ 0x1000, 0x0701, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1 },
-	{ 0, }
+	{ }
 };
 MODULE_DEVICE_TABLE (pci, yellowfin_pci_tbl);