blob: f9255815a5bbb840eba25f7ad6d44fe6bddc4110 [file] [log] [blame]
/*
* Copyright (C) 1991, 1992 Linus Torvalds
* Copyright (C) 1994, Karl Keyte: Added support for disk statistics
* Elevator latency, (C) 2000 Andrea Arcangeli <andrea@suse.de> SuSE
* Queue request tables / lock, selectable elevator, Jens Axboe <axboe@suse.de>
* kernel-doc documentation started by NeilBrown <neilb@cse.unsw.edu.au>
* - July2000
* bio rewrite, highmem i/o, etc, Jens Axboe <axboe@suse.de> - may 2001
*/
/*
* This handles all read/write requests to block devices
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/backing-dev.h>
#include <linux/bio.h>
#include <linux/blkdev.h>
#include <linux/highmem.h>
#include <linux/mm.h>
#include <linux/kernel_stat.h>
#include <linux/string.h>
#include <linux/init.h>
#include <linux/completion.h>
#include <linux/slab.h>
#include <linux/swap.h>
#include <linux/writeback.h>
#include <linux/task_io_accounting_ops.h>
#include <linux/fault-inject.h>
#include <linux/list_sort.h>
#define CREATE_TRACE_POINTS
#include <trace/events/block.h>
#include "blk.h"
EXPORT_TRACEPOINT_SYMBOL_GPL(block_bio_remap);
EXPORT_TRACEPOINT_SYMBOL_GPL(block_rq_remap);
EXPORT_TRACEPOINT_SYMBOL_GPL(block_bio_complete);
static int __make_request(struct request_queue *q, struct bio *bio);
/*
* For the allocated request tables
*/
static struct kmem_cache *request_cachep;
/*
* For queue allocation
*/
struct kmem_cache *blk_requestq_cachep;
/*
* Controlling structure to kblockd
*/
static struct workqueue_struct *kblockd_workqueue;
static void drive_stat_acct(struct request *rq, int new_io)
{
struct hd_struct *part;
int rw = rq_data_dir(rq);
int cpu;
if (!blk_do_io_stat(rq))
return;
cpu = part_stat_lock();
if (!new_io) {
part = rq->part;
part_stat_inc(cpu, part, merges[rw]);
} else {
part = disk_map_sector_rcu(rq->rq_disk, blk_rq_pos(rq));
if (!hd_struct_try_get(part)) {
/*
* The partition is already being removed,
* the request will be accounted on the disk only
*
* We take a reference on disk->part0 although that
* partition will never be deleted, so we can treat
* it as any other partition.
*/
part = &rq->rq_disk->part0;
hd_struct_get(part);
}
part_round_stats(cpu, part);
part_inc_in_flight(part, rw);
rq->part = part;
}
part_stat_unlock();
}
void blk_queue_congestion_threshold(struct request_queue *q)
{
int nr;
nr = q->nr_requests - (q->nr_requests / 8) + 1;
if (nr > q->nr_requests)
nr = q->nr_requests;
q->nr_congestion_on = nr;
nr = q->nr_requests - (q->nr_requests / 8) - (q->nr_requests / 16) - 1;
if (nr < 1)
nr = 1;
q->nr_congestion_off = nr;
}
/**
* blk_get_backing_dev_info - get the address of a queue's backing_dev_info
* @bdev: device
*
* Locates the passed device's request queue and returns the address of its
* backing_dev_info
*
* Will return NULL if the request queue cannot be located.
*/
struct backing_dev_info *blk_get_backing_dev_info(struct block_device *bdev)
{
struct backing_dev_info *ret = NULL;
struct request_queue *q = bdev_get_queue(bdev);
if (q)
ret = &q->backing_dev_info;
return ret;
}
EXPORT_SYMBOL(blk_get_backing_dev_info);
void blk_rq_init(struct request_queue *q, struct request *rq)
{
memset(rq, 0, sizeof(*rq));
INIT_LIST_HEAD(&rq->queuelist);
INIT_LIST_HEAD(&rq->timeout_list);
rq->cpu = -1;
rq->q = q;
rq->__sector = (sector_t) -1;
INIT_HLIST_NODE(&rq->hash);
RB_CLEAR_NODE(&rq->rb_node);
rq->cmd = rq->__cmd;
rq->cmd_len = BLK_MAX_CDB;
rq->tag = -1;
rq->ref_count = 1;
rq->start_time = jiffies;
set_start_time_ns(rq);
rq->part = NULL;
}
EXPORT_SYMBOL(blk_rq_init);
static void req_bio_endio(struct request *rq, struct bio *bio,
unsigned int nbytes, int error)
{
if (error)
clear_bit(BIO_UPTODATE, &bio->bi_flags);
else if (!test_bit(BIO_UPTODATE, &bio->bi_flags))
error = -EIO;
if (unlikely(nbytes > bio->bi_size)) {
printk(KERN_ERR "%s: want %u bytes done, %u left\n",
__func__, nbytes, bio->bi_size);
nbytes = bio->bi_size;
}
if (unlikely(rq->cmd_flags & REQ_QUIET))
set_bit(BIO_QUIET, &bio->bi_flags);
bio->bi_size -= nbytes;
bio->bi_sector += (nbytes >> 9);
if (bio_integrity(bio))
bio_integrity_advance(bio, nbytes);
/* don't actually finish bio if it's part of flush sequence */
if (bio->bi_size == 0 && !(rq->cmd_flags & REQ_FLUSH_SEQ))
bio_endio(bio, error);
}
void blk_dump_rq_flags(struct request *rq, char *msg)
{
int bit;
printk(KERN_INFO "%s: dev %s: type=%x, flags=%x\n", msg,
rq->rq_disk ? rq->rq_disk->disk_name : "?", rq->cmd_type,
rq->cmd_flags);
printk(KERN_INFO " sector %llu, nr/cnr %u/%u\n",
(unsigned long long)blk_rq_pos(rq),
blk_rq_sectors(rq), blk_rq_cur_sectors(rq));
printk(KERN_INFO " bio %p, biotail %p, buffer %p, len %u\n",
rq->bio, rq->biotail, rq->buffer, blk_rq_bytes(rq));
if (rq->cmd_type == REQ_TYPE_BLOCK_PC) {
printk(KERN_INFO " cdb: ");
for (bit = 0; bit < BLK_MAX_CDB; bit++)
printk("%02x ", rq->cmd[bit]);
printk("\n");
}
}
EXPORT_SYMBOL(blk_dump_rq_flags);
static void blk_delay_work(struct work_struct *work)
{
struct request_queue *q;
q = container_of(work, struct request_queue, delay_work.work);
spin_lock_irq(q->queue_lock);
__blk_run_queue(q);
spin_unlock_irq(q->queue_lock);
}
/**
* blk_delay_queue - restart queueing after defined interval
* @q: The &struct request_queue in question
* @msecs: Delay in msecs
*
* Description:
* Sometimes queueing needs to be postponed for a little while, to allow
* resources to come back. This function will make sure that queueing is
* restarted around the specified time.
*/
void blk_delay_queue(struct request_queue *q, unsigned long msecs)
{
queue_delayed_work(kblockd_workqueue, &q->delay_work,
msecs_to_jiffies(msecs));
}
EXPORT_SYMBOL(blk_delay_queue);
/**
* blk_start_queue - restart a previously stopped queue
* @q: The &struct request_queue in question
*
* Description:
* blk_start_queue() will clear the stop flag on the queue, and call
* the request_fn for the queue if it was in a stopped state when
* entered. Also see blk_stop_queue(). Queue lock must be held.
**/
void blk_start_queue(struct request_queue *q)
{
WARN_ON(!irqs_disabled());
queue_flag_clear(QUEUE_FLAG_STOPPED, q);
__blk_run_queue(q);
}
EXPORT_SYMBOL(blk_start_queue);
/**
* blk_stop_queue - stop a queue
* @q: The &struct request_queue in question
*
* Description:
* The Linux block layer assumes that a block driver will consume all
* entries on the request queue when the request_fn strategy is called.
* Often this will not happen, because of hardware limitations (queue
* depth settings). If a device driver gets a 'queue full' response,
* or if it simply chooses not to queue more I/O at one point, it can
* call this function to prevent the request_fn from being called until
* the driver has signalled it's ready to go again. This happens by calling
* blk_start_queue() to restart queue operations. Queue lock must be held.
**/
void blk_stop_queue(struct request_queue *q)
{
__cancel_delayed_work(&q->delay_work);
queue_flag_set(QUEUE_FLAG_STOPPED, q);
}
EXPORT_SYMBOL(blk_stop_queue);
/**
* blk_sync_queue - cancel any pending callbacks on a queue
* @q: the queue
*
* Description:
* The block layer may perform asynchronous callback activity
* on a queue, such as calling the unplug function after a timeout.
* A block device may call blk_sync_queue to ensure that any
* such activity is cancelled, thus allowing it to release resources
* that the callbacks might use. The caller must already have made sure
* that its ->make_request_fn will not re-add plugging prior to calling
* this function.
*
* This function does not cancel any asynchronous activity arising
* out of elevator or throttling code. That would require elevaotor_exit()
* and blk_throtl_exit() to be called with queue lock initialized.
*
*/
void blk_sync_queue(struct request_queue *q)
{
del_timer_sync(&q->timeout);
cancel_delayed_work_sync(&q->delay_work);
}
EXPORT_SYMBOL(blk_sync_queue);
/**
* __blk_run_queue - run a single device queue
* @q: The queue to run
*
* Description:
* See @blk_run_queue. This variant must be called with the queue lock
* held and interrupts disabled.
*/
void __blk_run_queue(struct request_queue *q)
{
if (unlikely(blk_queue_stopped(q)))
return;
q->request_fn(q);
}
EXPORT_SYMBOL(__blk_run_queue);
/**
* blk_run_queue_async - run a single device queue in workqueue context
* @q: The queue to run
*
* Description:
* Tells kblockd to perform the equivalent of @blk_run_queue on behalf
* of us.
*/
void blk_run_queue_async(struct request_queue *q)
{
if (likely(!blk_queue_stopped(q))) {
__cancel_delayed_work(&q->delay_work);
queue_delayed_work(kblockd_workqueue, &q->delay_work, 0);
}
}
EXPORT_SYMBOL(blk_run_queue_async);
/**
* blk_run_queue - run a single device queue
* @q: The queue to run
*
* Description:
* Invoke request handling on this queue, if it has pending work to do.
* May be used to restart queueing when a request has completed.
*/
void blk_run_queue(struct request_queue *q)
{
unsigned long flags;
spin_lock_irqsave(q->queue_lock, flags);
__blk_run_queue(q);
spin_unlock_irqrestore(q->queue_lock, flags);
}
EXPORT_SYMBOL(blk_run_queue);
void blk_put_queue(struct request_queue *q)
{
kobject_put(&q->kobj);
}
EXPORT_SYMBOL(blk_put_queue);
/*
* Note: If a driver supplied the queue lock, it should not zap that lock
* unexpectedly as some queue cleanup components like elevator_exit() and
* blk_throtl_exit() need queue lock.
*/
void blk_cleanup_queue(struct request_queue *q)
{
/*
* We know we have process context here, so we can be a little
* cautious and ensure that pending block actions on this device
* are done before moving on. Going into this function, we should
* not have processes doing IO to this device.
*/
blk_sync_queue(q);
del_timer_sync(&q->backing_dev_info.laptop_mode_wb_timer);
mutex_lock(&q->sysfs_lock);
queue_flag_set_unlocked(QUEUE_FLAG_DEAD, q);
mutex_unlock(&q->sysfs_lock);
if (q->elevator)
elevator_exit(q->elevator);
blk_throtl_exit(q);
blk_put_queue(q);
}
EXPORT_SYMBOL(blk_cleanup_queue);
static int blk_init_free_list(struct request_queue *q)
{
struct request_list *rl = &q->rq;
if (unlikely(rl->rq_pool))
return 0;
rl->count[BLK_RW_SYNC] = rl->count[BLK_RW_ASYNC] = 0;
rl->starved[BLK_RW_SYNC] = rl->starved[BLK_RW_ASYNC] = 0;
rl->elvpriv = 0;
init_waitqueue_head(&rl->wait[BLK_RW_SYNC]);
init_waitqueue_head(&rl->wait[BLK_RW_ASYNC]);
rl->rq_pool = mempool_create_node(BLKDEV_MIN_RQ, mempool_alloc_slab,
mempool_free_slab, request_cachep, q->node);
if (!rl->rq_pool)
return -ENOMEM;
return 0;
}
struct request_queue *blk_alloc_queue(gfp_t gfp_mask)
{
return blk_alloc_queue_node(gfp_mask, -1);
}
EXPORT_SYMBOL(blk_alloc_queue);
struct request_queue *blk_alloc_queue_node(gfp_t gfp_mask, int node_id)
{
struct request_queue *q;
int err;
q = kmem_cache_alloc_node(blk_requestq_cachep,
gfp_mask | __GFP_ZERO, node_id);
if (!q)
return NULL;
q->backing_dev_info.ra_pages =
(VM_MAX_READAHEAD * 1024) / PAGE_CACHE_SIZE;
q->backing_dev_info.state = 0;
q->backing_dev_info.capabilities = BDI_CAP_MAP_COPY;
q->backing_dev_info.name = "block";
err = bdi_init(&q->backing_dev_info);
if (err) {
kmem_cache_free(blk_requestq_cachep, q);
return NULL;
}
if (blk_throtl_init(q)) {
kmem_cache_free(blk_requestq_cachep, q);
return NULL;
}
setup_timer(&q->backing_dev_info.laptop_mode_wb_timer,
laptop_mode_timer_fn, (unsigned long) q);
setup_timer(&q->timeout, blk_rq_timed_out_timer, (unsigned long) q);
INIT_LIST_HEAD(&q->timeout_list);
INIT_LIST_HEAD(&q->flush_queue[0]);
INIT_LIST_HEAD(&q->flush_queue[1]);
INIT_LIST_HEAD(&q->flush_data_in_flight);
INIT_DELAYED_WORK(&q->delay_work, blk_delay_work);
kobject_init(&q->kobj, &blk_queue_ktype);
mutex_init(&q->sysfs_lock);
spin_lock_init(&q->__queue_lock);
/*
* By default initialize queue_lock to internal lock and driver can
* override it later if need be.
*/
q->queue_lock = &q->__queue_lock;
return q;
}
EXPORT_SYMBOL(blk_alloc_queue_node);
/**
* blk_init_queue - prepare a request queue for use with a block device
* @rfn: The function to be called to process requests that have been
* placed on the queue.
* @lock: Request queue spin lock
*
* Description:
* If a block device wishes to use the standard request handling procedures,
* which sorts requests and coalesces adjacent requests, then it must
* call blk_init_queue(). The function @rfn will be called when there
* are requests on the queue that need to be processed. If the device
* supports plugging, then @rfn may not be called immediately when requests
* are available on the queue, but may be called at some time later instead.
* Plugged queues are generally unplugged when a buffer belonging to one
* of the requests on the queue is needed, or due to memory pressure.
*
* @rfn is not required, or even expected, to remove all requests off the
* queue, but only as many as it can handle at a time. If it does leave
* requests on the queue, it is responsible for arranging that the requests
* get dealt with eventually.
*
* The queue spin lock must be held while manipulating the requests on the
* request queue; this lock will be taken also from interrupt context, so irq
* disabling is needed for it.
*
* Function returns a pointer to the initialized request queue, or %NULL if
* it didn't succeed.
*
* Note:
* blk_init_queue() must be paired with a blk_cleanup_queue() call
* when the block device is deactivated (such as at module unload).
**/
struct request_queue *blk_init_queue(request_fn_proc *rfn, spinlock_t *lock)
{
return blk_init_queue_node(rfn, lock, -1);
}
EXPORT_SYMBOL(blk_init_queue);
struct request_queue *
blk_init_queue_node(request_fn_proc *rfn, spinlock_t *lock, int node_id)
{
struct request_queue *uninit_q, *q;
uninit_q = blk_alloc_queue_node(GFP_KERNEL, node_id);
if (!uninit_q)
return NULL;
q = blk_init_allocated_queue_node(uninit_q, rfn, lock, node_id);
if (!q)
blk_cleanup_queue(uninit_q);
return q;
}
EXPORT_SYMBOL(blk_init_queue_node);
struct request_queue *
blk_init_allocated_queue(struct request_queue *q, request_fn_proc *rfn,
spinlock_t *lock)
{
return blk_init_allocated_queue_node(q, rfn, lock, -1);
}
EXPORT_SYMBOL(blk_init_allocated_queue);
struct request_queue *
blk_init_allocated_queue_node(struct request_queue *q, request_fn_proc *rfn,
spinlock_t *lock, int node_id)
{
if (!q)
return NULL;
q->node = node_id;
if (blk_init_free_list(q))
return NULL;
q->request_fn = rfn;
q->prep_rq_fn = NULL;
q->unprep_rq_fn = NULL;
q->queue_flags = QUEUE_FLAG_DEFAULT;
/* Override internal queue lock with supplied lock pointer */
if (lock)
q->queue_lock = lock;
/*
* This also sets hw/phys segments, boundary and size
*/
blk_queue_make_request(q, __make_request);
q->sg_reserved_size = INT_MAX;
/*
* all done
*/
if (!elevator_init(q, NULL)) {
blk_queue_congestion_threshold(q);
return q;
}
return NULL;
}
EXPORT_SYMBOL(blk_init_allocated_queue_node);
int blk_get_queue(struct request_queue *q)
{
if (likely(!test_bit(QUEUE_FLAG_DEAD, &q->queue_flags))) {
kobject_get(&q->kobj);
return 0;
}
return 1;
}
EXPORT_SYMBOL(blk_get_queue);
static inline void blk_free_request(struct request_queue *q, struct request *rq)
{
if (rq->cmd_flags & REQ_ELVPRIV)
elv_put_request(q, rq);
mempool_free(rq, q->rq.rq_pool);
}
static struct request *
blk_alloc_request(struct request_queue *q, int flags, int priv, gfp_t gfp_mask)
{
struct request *rq = mempool_alloc(q->rq.rq_pool, gfp_mask);
if (!rq)
return NULL;
blk_rq_init(q, rq);
rq->cmd_flags = flags | REQ_ALLOCED;
if (priv) {
if (unlikely(elv_set_request(q, rq, gfp_mask))) {
mempool_free(rq, q->rq.rq_pool);
return NULL;
}
rq->cmd_flags |= REQ_ELVPRIV;
}
return rq;
}
/*
* ioc_batching returns true if the ioc is a valid batching request and
* should be given priority access to a request.
*/
static inline int ioc_batching(struct request_queue *q, struct io_context *ioc)
{
if (!ioc)
return 0;
/*
* Make sure the process is able to allocate at least 1 request
* even if the batch times out, otherwise we could theoretically
* lose wakeups.
*/
return ioc->nr_batch_requests == q->nr_batching ||
(ioc->nr_batch_requests > 0
&& time_before(jiffies, ioc->last_waited + BLK_BATCH_TIME));
}
/*
* ioc_set_batching sets ioc to be a new "batcher" if it is not one. This
* will cause the process to be a "batcher" on all queues in the system. This
* is the behaviour we want though - once it gets a wakeup it should be given
* a nice run.
*/
static void ioc_set_batching(struct request_queue *q, struct io_context *ioc)
{
if (!ioc || ioc_batching(q, ioc))
return;
ioc->nr_batch_requests = q->nr_batching;
ioc->last_waited = jiffies;
}
static void __freed_request(struct request_queue *q, int sync)
{
struct request_list *rl = &q->rq;
if (rl->count[sync] < queue_congestion_off_threshold(q))
blk_clear_queue_congested(q, sync);
if (rl->count[sync] + 1 <= q->nr_requests) {
if (waitqueue_active(&rl->wait[sync]))
wake_up(&rl->wait[sync]);
blk_clear_queue_full(q, sync);
}
}
/*
* A request has just been released. Account for it, update the full and
* congestion status, wake up any waiters. Called under q->queue_lock.
*/
static void freed_request(struct request_queue *q, int sync, int priv)
{
struct request_list *rl = &q->rq;
rl->count[sync]--;
if (priv)
rl->elvpriv--;
__freed_request(q, sync);
if (unlikely(rl->starved[sync ^ 1]))
__freed_request(q, sync ^ 1);
}
/*
* Determine if elevator data should be initialized when allocating the
* request associated with @bio.
*/
static bool blk_rq_should_init_elevator(struct bio *bio)
{
if (!bio)
return true;
/*
* Flush requests do not use the elevator so skip initialization.
* This allows a request to share the flush and elevator data.
*/
if (bio->bi_rw & (REQ_FLUSH | REQ_FUA))
return false;
return true;
}
/*
* Get a free request, queue_lock must be held.
* Returns NULL on failure, with queue_lock held.
* Returns !NULL on success, with queue_lock *not held*.
*/
static struct request *get_request(struct request_queue *q, int rw_flags,
struct bio *bio, gfp_t gfp_mask)
{
struct request *rq = NULL;
struct request_list *rl = &q->rq;
struct io_context *ioc = NULL;
const bool is_sync = rw_is_sync(rw_flags) != 0;
int may_queue, priv = 0;
may_queue = elv_may_queue(q, rw_flags);
if (may_queue == ELV_MQUEUE_NO)
goto rq_starved;
if (rl->count[is_sync]+1 >= queue_congestion_on_threshold(q)) {
if (rl->count[is_sync]+1 >= q->nr_requests) {
ioc = current_io_context(GFP_ATOMIC, q->node);
/*
* The queue will fill after this allocation, so set
* it as full, and mark this process as "batching".
* This process will be allowed to complete a batch of
* requests, others will be blocked.
*/
if (!blk_queue_full(q, is_sync)) {
ioc_set_batching(q, ioc);
blk_set_queue_full(q, is_sync);
} else {
if (may_queue != ELV_MQUEUE_MUST
&& !ioc_batching(q, ioc)) {
/*
* The queue is full and the allocating
* process is not a "batcher", and not
* exempted by the IO scheduler
*/
goto out;
}
}
}
blk_set_queue_congested(q, is_sync);
}
/*
* Only allow batching queuers to allocate up to 50% over the defined
* limit of requests, otherwise we could have thousands of requests
* allocated with any setting of ->nr_requests
*/
if (rl->count[is_sync] >= (3 * q->nr_requests / 2))
goto out;
rl->count[is_sync]++;
rl->starved[is_sync] = 0;
if (blk_rq_should_init_elevator(bio)) {
priv = !test_bit(QUEUE_FLAG_ELVSWITCH, &q->queue_flags);
if (priv)
rl->elvpriv++;
}
if (blk_queue_io_stat(q))
rw_flags |= REQ_IO_STAT;
spin_unlock_irq(q->queue_lock);
rq = blk_alloc_request(q, rw_flags, priv, gfp_mask);
if (unlikely(!rq)) {
/*
* Allocation failed presumably due to memory. Undo anything
* we might have messed up.
*
* Allocating task should really be put onto the front of the
* wait queue, but this is pretty rare.
*/
spin_lock_irq(q->queue_lock);
freed_request(q, is_sync, priv);
/*
* in the very unlikely event that allocation failed and no
* requests for this direction was pending, mark us starved
* so that freeing of a request in the other direction will
* notice us. another possible fix would be to split the
* rq mempool into READ and WRITE
*/
rq_starved:
if (unlikely(rl->count[is_sync] == 0))
rl->starved[is_sync] = 1;
goto out;
}
/*
* ioc may be NULL here, and ioc_batching will be false. That's
* OK, if the queue is under the request limit then requests need
* not count toward the nr_batch_requests limit. There will always
* be some limit enforced by BLK_BATCH_TIME.
*/
if (ioc_batching(q, ioc))
ioc->nr_batch_requests--;
trace_block_getrq(q, bio, rw_flags & 1);
out:
return rq;
}
/*
* No available requests for this queue, wait for some requests to become
* available.
*
* Called with q->queue_lock held, and returns with it unlocked.
*/
static struct request *get_request_wait(struct request_queue *q, int rw_flags,
struct bio *bio)
{
const bool is_sync = rw_is_sync(rw_flags) != 0;
struct request *rq;
rq = get_request(q, rw_flags, bio, GFP_NOIO);
while (!rq) {
DEFINE_WAIT(wait);
struct io_context *ioc;
struct request_list *rl = &q->rq;
prepare_to_wait_exclusive(&rl->wait[is_sync], &wait,
TASK_UNINTERRUPTIBLE);
trace_block_sleeprq(q, bio, rw_flags & 1);
spin_unlock_irq(q->queue_lock);
io_schedule();
/*
* After sleeping, we become a "batching" process and
* will be able to allocate at least one request, and
* up to a big batch of them for a small period time.
* See ioc_batching, ioc_set_batching
*/
ioc = current_io_context(GFP_NOIO, q->node);
ioc_set_batching(q, ioc);
spin_lock_irq(q->queue_lock);
finish_wait(&rl->wait[is_sync], &wait);
rq = get_request(q, rw_flags, bio, GFP_NOIO);
};
return rq;
}
struct request *blk_get_request(struct request_queue *q, int rw, gfp_t gfp_mask)
{
struct request *rq;
if (unlikely(test_bit(QUEUE_FLAG_DEAD, &q->queue_flags)))
return NULL;
BUG_ON(rw != READ && rw != WRITE);
spin_lock_irq(q->queue_lock);
if (gfp_mask & __GFP_WAIT) {
rq = get_request_wait(q, rw, NULL);
} else {
rq = get_request(q, rw, NULL, gfp_mask);
if (!rq)
spin_unlock_irq(q->queue_lock);
}
/* q->queue_lock is unlocked at this point */
return rq;
}
EXPORT_SYMBOL(blk_get_request);
/**
* blk_make_request - given a bio, allocate a corresponding struct request.
* @q: target request queue
* @bio: The bio describing the memory mappings that will be submitted for IO.
* It may be a chained-bio properly constructed by block/bio layer.
* @gfp_mask: gfp flags to be used for memory allocation
*
* blk_make_request is the parallel of generic_make_request for BLOCK_PC
* type commands. Where the struct request needs to be farther initialized by
* the caller. It is passed a &struct bio, which describes the memory info of
* the I/O transfer.
*
* The caller of blk_make_request must make sure that bi_io_vec
* are set to describe the memory buffers. That bio_data_dir() will return
* the needed direction of the request. (And all bio's in the passed bio-chain
* are properly set accordingly)
*
* If called under none-sleepable conditions, mapped bio buffers must not
* need bouncing, by calling the appropriate masked or flagged allocator,
* suitable for the target device. Otherwise the call to blk_queue_bounce will
* BUG.
*
* WARNING: When allocating/cloning a bio-chain, careful consideration should be
* given to how you allocate bios. In particular, you cannot use __GFP_WAIT for
* anything but the first bio in the chain. Otherwise you risk waiting for IO
* completion of a bio that hasn't been submitted yet, thus resulting in a
* deadlock. Alternatively bios should be allocated using bio_kmalloc() instead
* of bio_alloc(), as that avoids the mempool deadlock.
* If possible a big IO should be split into smaller parts when allocation
* fails. Partial allocation should not be an error, or you risk a live-lock.
*/
struct request *blk_make_request(struct request_queue *q, struct bio *bio,
gfp_t gfp_mask)
{
struct request *rq = blk_get_request(q, bio_data_dir(bio), gfp_mask);
if (unlikely(!rq))
return ERR_PTR(-ENOMEM);
for_each_bio(bio) {
struct bio *bounce_bio = bio;
int ret;
blk_queue_bounce(q, &bounce_bio);
ret = blk_rq_append_bio(q, rq, bounce_bio);
if (unlikely(ret)) {
blk_put_request(rq);
return ERR_PTR(ret);
}
}
return rq;
}
EXPORT_SYMBOL(blk_make_request);
/**
* blk_requeue_request - put a request back on queue
* @q: request queue where request should be inserted
* @rq: request to be inserted
*
* Description:
* Drivers often keep queueing requests until the hardware cannot accept
* more, when that condition happens we need to put the request back
* on the queue. Must be called with queue lock held.
*/
void blk_requeue_request(struct request_queue *q, struct request *rq)
{
blk_delete_timer(rq);
blk_clear_rq_complete(rq);
trace_block_rq_requeue(q, rq);
if (blk_rq_tagged(rq))
blk_queue_end_tag(q, rq);
BUG_ON(blk_queued_rq(rq));
elv_requeue_request(q, rq);
}
EXPORT_SYMBOL(blk_requeue_request);
static void add_acct_request(struct request_queue *q, struct request *rq,
int where)
{
drive_stat_acct(rq, 1);
__elv_add_request(q, rq, where);
}
/**
* blk_insert_request - insert a special request into a request queue
* @q: request queue where request should be inserted
* @rq: request to be inserted
* @at_head: insert request at head or tail of queue
* @data: private data
*
* Description:
* Many block devices need to execute commands asynchronously, so they don't
* block the whole kernel from preemption during request execution. This is
* accomplished normally by inserting aritficial requests tagged as
* REQ_TYPE_SPECIAL in to the corresponding request queue, and letting them
* be scheduled for actual execution by the request queue.
*
* We have the option of inserting the head or the tail of the queue.
* Typically we use the tail for new ioctls and so forth. We use the head
* of the queue for things like a QUEUE_FULL message from a device, or a
* host that is unable to accept a particular command.
*/
void blk_insert_request(struct request_queue *q, struct request *rq,
int at_head, void *data)
{
int where = at_head ? ELEVATOR_INSERT_FRONT : ELEVATOR_INSERT_BACK;
unsigned long flags;
/*
* tell I/O scheduler that this isn't a regular read/write (ie it
* must not attempt merges on this) and that it acts as a soft
* barrier
*/
rq->cmd_type = REQ_TYPE_SPECIAL;
rq->special = data;
spin_lock_irqsave(q->queue_lock, flags);
/*
* If command is tagged, release the tag
*/
if (blk_rq_tagged(rq))
blk_queue_end_tag(q, rq);
add_acct_request(q, rq, where);
__blk_run_queue(q);
spin_unlock_irqrestore(q->queue_lock, flags);
}
EXPORT_SYMBOL(blk_insert_request);
static void part_round_stats_single(int cpu, struct hd_struct *part,
unsigned long now)
{
if (now == part->stamp)
return;
if (part_in_flight(part)) {
__part_stat_add(cpu, part, time_in_queue,
part_in_flight(part) * (now - part->stamp));
__part_stat_add(cpu, part, io_ticks, (now - part->stamp));
}
part->stamp = now;
}
/**
* part_round_stats() - Round off the performance stats on a struct disk_stats.
* @cpu: cpu number for stats access
* @part: target partition
*
* The average IO queue length and utilisation statistics are maintained
* by observing the current state of the queue length and the amount of
* time it has been in this state for.
*
* Normally, that accounting is done on IO completion, but that can result
* in more than a second's worth of IO being accounted for within any one
* second, leading to >100% utilisation. To deal with that, we call this
* function to do a round-off before returning the results when reading
* /proc/diskstats. This accounts immediately for all queue usage up to
* the current jiffies and restarts the counters again.
*/
void part_round_stats(int cpu, struct hd_struct *part)
{
unsigned long now = jiffies;
if (part->partno)
part_round_stats_single(cpu, &part_to_disk(part)->part0, now);
part_round_stats_single(cpu, part, now);
}
EXPORT_SYMBOL_GPL(part_round_stats);
/*
* queue lock must be held
*/
void __blk_put_request(struct request_queue *q, struct request *req)
{
if (unlikely(!q))
return;
if (unlikely(--req->ref_count))
return;
elv_completed_request(q, req);
/* this is a bio leak */
WARN_ON(req->bio != NULL);
/*
* Request may not have originated from ll_rw_blk. if not,
* it didn't come out of our reserved rq pools
*/
if (req->cmd_flags & REQ_ALLOCED) {
int is_sync = rq_is_sync(req) != 0;
int priv = req->cmd_flags & REQ_ELVPRIV;
BUG_ON(!list_empty(&req->queuelist));
BUG_ON(!hlist_unhashed(&req->hash));
blk_free_request(q, req);
freed_request(q, is_sync, priv);
}
}
EXPORT_SYMBOL_GPL(__blk_put_request);
void blk_put_request(struct request *req)
{
unsigned long flags;
struct request_queue *q = req->q;
spin_lock_irqsave(q->queue_lock, flags);
__blk_put_request(q, req);
spin_unlock_irqrestore(q->queue_lock, flags);
}
EXPORT_SYMBOL(blk_put_request);
/**
* blk_add_request_payload - add a payload to a request
* @rq: request to update
* @page: page backing the payload
* @len: length of the payload.
*
* This allows to later add a payload to an already submitted request by
* a block driver. The driver needs to take care of freeing the payload
* itself.
*
* Note that this is a quite horrible hack and nothing but handling of
* discard requests should ever use it.
*/
void blk_add_request_payload(struct request *rq, struct page *page,
unsigned int len)
{
struct bio *bio = rq->bio;
bio->bi_io_vec->bv_page = page;
bio->bi_io_vec->bv_offset = 0;
bio->bi_io_vec->bv_len = len;
bio->bi_size = len;
bio->bi_vcnt = 1;
bio->bi_phys_segments = 1;
rq->__data_len = rq->resid_len = len;
rq->nr_phys_segments = 1;
rq->buffer = bio_data(bio);
}
EXPORT_SYMBOL_GPL(blk_add_request_payload);
static bool bio_attempt_back_merge(struct request_queue *q, struct request *req,
struct bio *bio)
{
const int ff = bio->bi_rw & REQ_FAILFAST_MASK;
if (!ll_back_merge_fn(q, req, bio))
return false;
trace_block_bio_backmerge(q, bio);
if ((req->cmd_flags & REQ_FAILFAST_MASK) != ff)
blk_rq_set_mixed_merge(req);
req->biotail->bi_next = bio;
req->biotail = bio;
req->__data_len += bio->bi_size;
req->ioprio = ioprio_best(req->ioprio, bio_prio(bio));
drive_stat_acct(req, 0);
elv_bio_merged(q, req, bio);
return true;
}
static bool bio_attempt_front_merge(struct request_queue *q,
struct request *req, struct bio *bio)
{
const int ff = bio->bi_rw & REQ_FAILFAST_MASK;
if (!ll_front_merge_fn(q, req, bio))
return false;
trace_block_bio_frontmerge(q, bio);
if ((req->cmd_flags & REQ_FAILFAST_MASK) != ff)
blk_rq_set_mixed_merge(req);
bio->bi_next = req->bio;
req->bio = bio;
/*
* may not be valid. if the low level driver said
* it didn't need a bounce buffer then it better
* not touch req->buffer either...
*/
req->buffer = bio_data(bio);
req->__sector = bio->bi_sector;
req->__data_len += bio->bi_size;
req->ioprio = ioprio_best(req->ioprio, bio_prio(bio));
drive_stat_acct(req, 0);
elv_bio_merged(q, req, bio);
return true;
}
/*
* Attempts to merge with the plugged list in the current process. Returns
* true if merge was successful, otherwise false.
*/
static bool attempt_plug_merge(struct task_struct *tsk, struct request_queue *q,
struct bio *bio)
{
struct blk_plug *plug;
struct request *rq;
bool ret = false;
plug = tsk->plug;
if (!plug)
goto out;
list_for_each_entry_reverse(rq, &plug->list, queuelist) {
int el_ret;
if (rq->q != q)
continue;
el_ret = elv_try_merge(rq, bio);
if (el_ret == ELEVATOR_BACK_MERGE) {
ret = bio_attempt_back_merge(q, rq, bio);
if (ret)
break;
} else if (el_ret == ELEVATOR_FRONT_MERGE) {
ret = bio_attempt_front_merge(q, rq, bio);
if (ret)
break;
}
}
out:
return ret;
}
void init_request_from_bio(struct request *req, struct bio *bio)
{
req->cpu = bio->bi_comp_cpu;
req->cmd_type = REQ_TYPE_FS;
req->cmd_flags |= bio->bi_rw & REQ_COMMON_MASK;
if (bio->bi_rw & REQ_RAHEAD)
req->cmd_flags |= REQ_FAILFAST_MASK;
req->errors = 0;
req->__sector = bio->bi_sector;
req->ioprio = bio_prio(bio);
blk_rq_bio_prep(req->q, req, bio);
}
static int __make_request(struct request_queue *q, struct bio *bio)
{
const bool sync = !!(bio->bi_rw & REQ_SYNC);
struct blk_plug *plug;
int el_ret, rw_flags, where = ELEVATOR_INSERT_SORT;
struct request *req;
/*
* low level driver can indicate that it wants pages above a
* certain limit bounced to low memory (ie for highmem, or even
* ISA dma in theory)
*/
blk_queue_bounce(q, &bio);
if (bio->bi_rw & (REQ_FLUSH | REQ_FUA)) {
spin_lock_irq(q->queue_lock);
where = ELEVATOR_INSERT_FLUSH;
goto get_rq;
}
/*
* Check if we can merge with the plugged list before grabbing
* any locks.
*/
if (attempt_plug_merge(current, q, bio))
goto out;
spin_lock_irq(q->queue_lock);
el_ret = elv_merge(q, &req, bio);
if (el_ret == ELEVATOR_BACK_MERGE) {
if (bio_attempt_back_merge(q, req, bio)) {
if (!attempt_back_merge(q, req))
elv_merged_request(q, req, el_ret);
goto out_unlock;
}
} else if (el_ret == ELEVATOR_FRONT_MERGE) {
if (bio_attempt_front_merge(q, req, bio)) {
if (!attempt_front_merge(q, req))
elv_merged_request(q, req, el_ret);
goto out_unlock;
}
}
get_rq:
/*
* This sync check and mask will be re-done in init_request_from_bio(),
* but we need to set it earlier to expose the sync flag to the
* rq allocator and io schedulers.
*/
rw_flags = bio_data_dir(bio);
if (sync)
rw_flags |= REQ_SYNC;
/*
* Grab a free request. This is might sleep but can not fail.
* Returns with the queue unlocked.
*/
req = get_request_wait(q, rw_flags, bio);
/*
* After dropping the lock and possibly sleeping here, our request
* may now be mergeable after it had proven unmergeable (above).
* We don't worry about that case for efficiency. It won't happen
* often, and the elevators are able to handle it.
*/
init_request_from_bio(req, bio);
if (test_bit(QUEUE_FLAG_SAME_COMP, &q->queue_flags) ||
bio_flagged(bio, BIO_CPU_AFFINE))
req->cpu = raw_smp_processor_id();
plug = current->plug;
if (plug) {
/*
* If this is the first request added after a plug, fire
* of a plug trace. If others have been added before, check
* if we have multiple devices in this plug. If so, make a
* note to sort the list before dispatch.
*/
if (list_empty(&plug->list))
trace_block_plug(q);
else if (!plug->should_sort) {
struct request *__rq;
__rq = list_entry_rq(plug->list.prev);
if (__rq->q != q)
plug->should_sort = 1;
}
list_add_tail(&req->queuelist, &plug->list);
plug->count++;
drive_stat_acct(req, 1);
if (plug->count >= BLK_MAX_REQUEST_COUNT)
blk_flush_plug_list(plug, false);
} else {
spin_lock_irq(q->queue_lock);
add_acct_request(q, req, where);
__blk_run_queue(q);
out_unlock:
spin_unlock_irq(q->queue_lock);
}
out:
return 0;
}
/*
* If bio->bi_dev is a partition, remap the location
*/
static inline void blk_partition_remap(struct bio *bio)
{
struct block_device *bdev = bio->bi_bdev;
if (bio_sectors(bio) && bdev != bdev->bd_contains) {
struct hd_struct *p = bdev->bd_part;
bio->bi_sector += p->start_sect;
bio->bi_bdev = bdev->bd_contains;
trace_block_bio_remap(bdev_get_queue(bio->bi_bdev), bio,
bdev->bd_dev,
bio->bi_sector - p->start_sect);
}
}
static void handle_bad_sector(struct bio *bio)
{
char b[BDEVNAME_SIZE];
printk(KERN_INFO "attempt to access beyond end of device\n");
printk(KERN_INFO "%s: rw=%ld, want=%Lu, limit=%Lu\n",
bdevname(bio->bi_bdev, b),
bio->bi_rw,
(unsigned long long)bio->bi_sector + bio_sectors(bio),
(long long)(i_size_read(bio->bi_bdev->bd_inode) >> 9));
set_bit(BIO_EOF, &bio->bi_flags);
}
#ifdef CONFIG_FAIL_MAKE_REQUEST
static DECLARE_FAULT_ATTR(fail_make_request);
static int __init setup_fail_make_request(char *str)
{
return setup_fault_attr(&fail_make_request, str);
}
__setup("fail_make_request=", setup_fail_make_request);
static int should_fail_request(struct bio *bio)
{
struct hd_struct *part = bio->bi_bdev->bd_part;
if (part_to_disk(part)->part0.make_it_fail || part->make_it_fail)
return should_fail(&fail_make_request, bio->bi_size);
return 0;
}
static int __init fail_make_request_debugfs(void)
{
return init_fault_attr_dentries(&fail_make_request,
"fail_make_request");
}
late_initcall(fail_make_request_debugfs);
#else /* CONFIG_FAIL_MAKE_REQUEST */
static inline int should_fail_request(struct bio *bio)
{
return 0;
}
#endif /* CONFIG_FAIL_MAKE_REQUEST */
/*
* Check whether this bio extends beyond the end of the device.
*/
static inline int bio_check_eod(struct bio *bio, unsigned int nr_sectors)
{
sector_t maxsector;
if (!nr_sectors)
return 0;
/* Test device or partition size, when known. */
maxsector = i_size_read(bio->bi_bdev->bd_inode) >> 9;
if (maxsector) {
sector_t sector = bio->bi_sector;
if (maxsector < nr_sectors || maxsector - nr_sectors < sector) {
/*
* This may well happen - the kernel calls bread()
* without checking the size of the device, e.g., when
* mounting a device.
*/
handle_bad_sector(bio);
return 1;
}
}
return 0;
}
/**
* generic_make_request - hand a buffer to its device driver for I/O
* @bio: The bio describing the location in memory and on the device.
*
* generic_make_request() is used to make I/O requests of block
* devices. It is passed a &struct bio, which describes the I/O that needs
* to be done.
*
* generic_make_request() does not return any status. The
* success/failure status of the request, along with notification of
* completion, is delivered asynchronously through the bio->bi_end_io
* function described (one day) else where.
*
* The caller of generic_make_request must make sure that bi_io_vec
* are set to describe the memory buffer, and that bi_dev and bi_sector are
* set to describe the device address, and the
* bi_end_io and optionally bi_private are set to describe how
* completion notification should be signaled.
*
* generic_make_request and the drivers it calls may use bi_next if this
* bio happens to be merged with someone else, and may change bi_dev and
* bi_sector for remaps as it sees fit. So the values of these fields
* should NOT be depended on after the call to generic_make_request.
*/
static inline void __generic_make_request(struct bio *bio)
{
struct request_queue *q;
sector_t old_sector;
int ret, nr_sectors = bio_sectors(bio);
dev_t old_dev;
int err = -EIO;
might_sleep();
if (bio_check_eod(bio, nr_sectors))
goto end_io;
/*
* Resolve the mapping until finished. (drivers are
* still free to implement/resolve their own stacking
* by explicitly returning 0)
*
* NOTE: we don't repeat the blk_size check for each new device.
* Stacking drivers are expected to know what they are doing.
*/
old_sector = -1;
old_dev = 0;
do {
char b[BDEVNAME_SIZE];
q = bdev_get_queue(bio->bi_bdev);
if (unlikely(!q)) {
printk(KERN_ERR
"generic_make_request: Trying to access "
"nonexistent block-device %s (%Lu)\n",
bdevname(bio->bi_bdev, b),
(long long) bio->bi_sector);
goto end_io;
}
if (unlikely(!(bio->bi_rw & REQ_DISCARD) &&
nr_sectors > queue_max_hw_sectors(q))) {
printk(KERN_ERR "bio too big device %s (%u > %u)\n",
bdevname(bio->bi_bdev, b),
bio_sectors(bio),
queue_max_hw_sectors(q));
goto end_io;
}
if (unlikely(test_bit(QUEUE_FLAG_DEAD, &q->queue_flags)))
goto end_io;
if (should_fail_request(bio))
goto end_io;
/*
* If this device has partitions, remap block n
* of partition p to block n+start(p) of the disk.
*/
blk_partition_remap(bio);
if (bio_integrity_enabled(bio) && bio_integrity_prep(bio))
goto end_io;
if (old_sector != -1)
trace_block_bio_remap(q, bio, old_dev, old_sector);
old_sector = bio->bi_sector;
old_dev = bio->bi_bdev->bd_dev;
if (bio_check_eod(bio, nr_sectors))
goto end_io;
/*
* Filter flush bio's early so that make_request based
* drivers without flush support don't have to worry
* about them.
*/
if ((bio->bi_rw & (REQ_FLUSH | REQ_FUA)) && !q->flush_flags) {
bio->bi_rw &= ~(REQ_FLUSH | REQ_FUA);
if (!nr_sectors) {
err = 0;
goto end_io;
}
}
if ((bio->bi_rw & REQ_DISCARD) &&
(!blk_queue_discard(q) ||
((bio->bi_rw & REQ_SECURE) &&
!blk_queue_secdiscard(q)))) {
err = -EOPNOTSUPP;
goto end_io;
}
if (blk_throtl_bio(q, &bio))
goto end_io;
/*
* If bio = NULL, bio has been throttled and will be submitted
* later.
*/
if (!bio)
break;
trace_block_bio_queue(q, bio);
ret = q->make_request_fn(q, bio);
} while (ret);
return;
end_io:
bio_endio(bio, err);
}
/*
* We only want one ->make_request_fn to be active at a time,
* else stack usage with stacked devices could be a problem.
* So use current->bio_list to keep a list of requests
* submited by a make_request_fn function.
* current->bio_list is also used as a flag to say if
* generic_make_request is currently active in this task or not.
* If it is NULL, then no make_request is active. If it is non-NULL,
* then a make_request is active, and new requests should be added
* at the tail
*/
void generic_make_request(struct bio *bio)
{
struct bio_list bio_list_on_stack;
if (current->bio_list) {
/* make_request is active */
bio_list_add(current->bio_list, bio);
return;
}
/* following loop may be a bit non-obvious, and so deserves some
* explanation.
* Before entering the loop, bio->bi_next is NULL (as all callers
* ensure that) so we have a list with a single bio.
* We pretend that we have just taken it off a longer list, so
* we assign bio_list to a pointer to the bio_list_on_stack,
* thus initialising the bio_list of new bios to be
* added. __generic_make_request may indeed add some more bios
* through a recursive call to generic_make_request. If it
* did, we find a non-NULL value in bio_list and re-enter the loop
* from the top. In this case we really did just take the bio
* of the top of the list (no pretending) and so remove it from
* bio_list, and call into __generic_make_request again.
*
* The loop was structured like this to make only one call to
* __generic_make_request (which is important as it is large and
* inlined) and to keep the structure simple.
*/
BUG_ON(bio->bi_next);
bio_list_init(&bio_list_on_stack);
current->bio_list = &bio_list_on_stack;
do {
__generic_make_request(bio);
bio = bio_list_pop(current->bio_list);
} while (bio);
current->bio_list = NULL; /* deactivate */
}
EXPORT_SYMBOL(generic_make_request);
/**
* submit_bio - submit a bio to the block device layer for I/O
* @rw: whether to %READ or %WRITE, or maybe to %READA (read ahead)
* @bio: The &struct bio which describes the I/O
*
* submit_bio() is very similar in purpose to generic_make_request(), and
* uses that function to do most of the work. Both are fairly rough
* interfaces; @bio must be presetup and ready for I/O.
*
*/
void submit_bio(int rw, struct bio *bio)
{
int count = bio_sectors(bio);
bio->bi_rw |= rw;
/*
* If it's a regular read/write or a barrier with data attached,
* go through the normal accounting stuff before submission.
*/
if (bio_has_data(bio) && !(rw & REQ_DISCARD)) {
if (rw & WRITE) {
count_vm_events(PGPGOUT, count);
} else {
task_io_account_read(bio->bi_size);
count_vm_events(PGPGIN, count);
}
if (unlikely(block_dump)) {
char b[BDEVNAME_SIZE];
printk(KERN_DEBUG "%s(%d): %s block %Lu on %s (%u sectors)\n",
current->comm, task_pid_nr(current),
(rw & WRITE) ? "WRITE" : "READ",
(unsigned long long)bio->bi_sector,
bdevname(bio->bi_bdev, b),
count);
}
}
generic_make_request(bio);
}
EXPORT_SYMBOL(submit_bio);
/**
* blk_rq_check_limits - Helper function to check a request for the queue limit
* @q: the queue
* @rq: the request being checked
*
* Description:
* @rq may have been made based on weaker limitations of upper-level queues
* in request stacking drivers, and it may violate the limitation of @q.
* Since the block layer and the underlying device driver trust @rq
* after it is inserted to @q, it should be checked against @q before
* the insertion using this generic function.
*
* This function should also be useful for request stacking drivers
* in some cases below, so export this function.
* Request stacking drivers like request-based dm may change the queue
* limits while requests are in the queue (e.g. dm's table swapping).
* Such request stacking drivers should check those requests agaist
* the new queue limits again when they dispatch those requests,
* although such checkings are also done against the old queue limits
* when submitting requests.
*/
int blk_rq_check_limits(struct request_queue *q, struct request *rq)
{
if (rq->cmd_flags & REQ_DISCARD)
return 0;
if (blk_rq_sectors(rq) > queue_max_sectors(q) ||
blk_rq_bytes(rq) > queue_max_hw_sectors(q) << 9) {
printk(KERN_ERR "%s: over max size limit.\n", __func__);
return -EIO;
}
/*
* queue's settings related to segment counting like q->bounce_pfn
* may differ from that of other stacking queues.
* Recalculate it to check the request correctly on this queue's
* limitation.
*/
blk_recalc_rq_segments(rq);
if (rq->nr_phys_segments > queue_max_segments(q)) {
printk(KERN_ERR "%s: over max segments limit.\n", __func__);
return -EIO;
}
return 0;
}
EXPORT_SYMBOL_GPL(blk_rq_check_limits);
/**
* blk_insert_cloned_request - Helper for stacking drivers to submit a request
* @q: the queue to submit the request
* @rq: the request being queued
*/
int blk_insert_cloned_request(struct request_queue *q, struct request *rq)
{
unsigned long flags;
if (blk_rq_check_limits(q, rq))
return -EIO;
#ifdef CONFIG_FAIL_MAKE_REQUEST
if (rq->rq_disk && rq->rq_disk->part0.make_it_fail &&
should_fail(&fail_make_request, blk_rq_bytes(rq)))
return -EIO;
#endif
spin_lock_irqsave(q->queue_lock, flags);
/*
* Submitting request must be dequeued before calling this function
* because it will be linked to another request_queue
*/
BUG_ON(blk_queued_rq(rq));
add_acct_request(q, rq, ELEVATOR_INSERT_BACK);
spin_unlock_irqrestore(q->queue_lock, flags);
return 0;
}
EXPORT_SYMBOL_GPL(blk_insert_cloned_request);
/**
* blk_rq_err_bytes - determine number of bytes till the next failure boundary
* @rq: request to examine
*
* Description:
* A request could be merge of IOs which require different failure
* handling. This function determines the number of bytes which
* can be failed from the beginning of the request without
* crossing into area which need to be retried further.
*
* Return:
* The number of bytes to fail.
*
* Context:
* queue_lock must be held.
*/
unsigned int blk_rq_err_bytes(const struct request *rq)
{
unsigned int ff = rq->cmd_flags & REQ_FAILFAST_MASK;
unsigned int bytes = 0;
struct bio *bio;
if (!(rq->cmd_flags & REQ_MIXED_MERGE))
return blk_rq_bytes(rq);
/*
* Currently the only 'mixing' which can happen is between
* different fastfail types. We can safely fail portions
* which have all the failfast bits that the first one has -
* the ones which are at least as eager to fail as the first
* one.
*/
for (bio = rq->bio; bio; bio = bio->bi_next) {
if ((bio->bi_rw & ff) != ff)
break;
bytes += bio->bi_size;
}
/* this could lead to infinite loop */
BUG_ON(blk_rq_bytes(rq) && !bytes);
return bytes;
}
EXPORT_SYMBOL_GPL(blk_rq_err_bytes);
static void blk_account_io_completion(struct request *req, unsigned int bytes)
{
if (blk_do_io_stat(req)) {
const int rw = rq_data_dir(req);
struct hd_struct *part;
int cpu;
cpu = part_stat_lock();
part = req->part;
part_stat_add(cpu, part, sectors[rw], bytes >> 9);
part_stat_unlock();
}
}
static void blk_account_io_done(struct request *req)
{
/*
* Account IO completion. flush_rq isn't accounted as a
* normal IO on queueing nor completion. Accounting the
* containing request is enough.
*/
if (blk_do_io_stat(req) && !(req->cmd_flags & REQ_FLUSH_SEQ)) {
unsigned long duration = jiffies - req->start_time;
const int rw = rq_data_dir(req);
struct hd_struct *part;
int cpu;
cpu = part_stat_lock();
part = req->part;
part_stat_inc(cpu, part, ios[rw]);
part_stat_add(cpu, part, ticks[rw], duration);
part_round_stats(cpu, part);
part_dec_in_flight(part, rw);
hd_struct_put(part);
part_stat_unlock();
}
}
/**
* blk_peek_request - peek at the top of a request queue
* @q: request queue to peek at
*
* Description:
* Return the request at the top of @q. The returned request
* should be started using blk_start_request() before LLD starts
* processing it.
*
* Return:
* Pointer to the request at the top of @q if available. Null
* otherwise.
*
* Context:
* queue_lock must be held.
*/
struct request *blk_peek_request(struct request_queue *q)
{
struct request *rq;
int ret;
while ((rq = __elv_next_request(q)) != NULL) {
if (!(rq->cmd_flags & REQ_STARTED)) {
/*
* This is the first time the device driver
* sees this request (possibly after
* requeueing). Notify IO scheduler.
*/
if (rq->cmd_flags & REQ_SORTED)
elv_activate_rq(q, rq);
/*
* just mark as started even if we don't start
* it, a request that has been delayed should
* not be passed by new incoming requests
*/
rq->cmd_flags |= REQ_STARTED;
trace_block_rq_issue(q, rq);
}
if (!q->boundary_rq || q->boundary_rq == rq) {
q->end_sector = rq_end_sector(rq);
q->boundary_rq = NULL;
}
if (rq->cmd_flags & REQ_DONTPREP)
break;
if (q->dma_drain_size && blk_rq_bytes(rq)) {
/*
* make sure space for the drain appears we
* know we can do this because max_hw_segments
* has been adjusted to be one fewer than the
* device can handle
*/
rq->nr_phys_segments++;
}
if (!q->prep_rq_fn)
break;
ret = q->prep_rq_fn(q, rq);
if (ret == BLKPREP_OK) {
break;
} else if (ret == BLKPREP_DEFER) {
/*
* the request may have been (partially) prepped.
* we need to keep this request in the front to
* avoid resource deadlock. REQ_STARTED will
* prevent other fs requests from passing this one.
*/
if (q->dma_drain_size && blk_rq_bytes(rq) &&
!(rq->cmd_flags & REQ_DONTPREP)) {
/*
* remove the space for the drain we added
* so that we don't add it again
*/
--rq->nr_phys_segments;
}
rq = NULL;
break;
} else if (ret == BLKPREP_KILL) {
rq->cmd_flags |= REQ_QUIET;
/*
* Mark this request as started so we don't trigger
* any debug logic in the end I/O path.
*/
blk_start_request(rq);
__blk_end_request_all(rq, -EIO);
} else {
printk(KERN_ERR "%s: bad return=%d\n", __func__, ret);
break;
}
}
return rq;
}
EXPORT_SYMBOL(blk_peek_request);
void blk_dequeue_request(struct request *rq)
{
struct request_queue *q = rq->q;
BUG_ON(list_empty(&rq->queuelist));
BUG_ON(ELV_ON_HASH(rq));
list_del_init(&rq->queuelist);
/*
* the time frame between a request being removed from the lists
* and to it is freed is accounted as io that is in progress at
* the driver side.
*/
if (blk_account_rq(rq)) {
q->in_flight[rq_is_sync(rq)]++;
set_io_start_time_ns(rq);
}
}
/**
* blk_start_request - start request processing on the driver
* @req: request to dequeue
*
* Description:
* Dequeue @req and start timeout timer on it. This hands off the
* request to the driver.
*
* Block internal functions which don't want to start timer should
* call blk_dequeue_request().
*
* Context:
* queue_lock must be held.
*/
void blk_start_request(struct request *req)
{
blk_dequeue_request(req);
/*
* We are now handing the request to the hardware, initialize
* resid_len to full count and add the timeout handler.
*/
req->resid_len = blk_rq_bytes(req);
if (unlikely(blk_bidi_rq(req)))
req->next_rq->resid_len = blk_rq_bytes(req->next_rq);
blk_add_timer(req);
}
EXPORT_SYMBOL(blk_start_request);
/**
* blk_fetch_request - fetch a request from a request queue
* @q: request queue to fetch a request from
*
* Description:
* Return the request at the top of @q. The request is started on
* return and LLD can start processing it immediately.
*
* Return:
* Pointer to the request at the top of @q if available. Null
* otherwise.
*
* Context:
* queue_lock must be held.
*/
struct request *blk_fetch_request(struct request_queue *q)
{
struct request *rq;
rq = blk_peek_request(q);
if (rq)
blk_start_request(rq);
return rq;
}
EXPORT_SYMBOL(blk_fetch_request);
/**
* blk_update_request - Special helper function for request stacking drivers
* @req: the request being processed
* @error: %0 for success, < %0 for error
* @nr_bytes: number of bytes to complete @req
*
* Description:
* Ends I/O on a number of bytes attached to @req, but doesn't complete
* the request structure even if @req doesn't have leftover.
* If @req has leftover, sets it up for the next range of segments.
*
* This special helper function is only for request stacking drivers
* (e.g. request-based dm) so that they can handle partial completion.
* Actual device drivers should use blk_end_request instead.
*
* Passing the result of blk_rq_bytes() as @nr_bytes guarantees
* %false return from this function.
*
* Return:
* %false - this request doesn't have any more data
* %true - this request has more data
**/
bool blk_update_request(struct request *req, int error, unsigned int nr_bytes)
{
int total_bytes, bio_nbytes, next_idx = 0;
struct bio *bio;
if (!req->bio)
return false;
trace_block_rq_complete(req->q, req);
/*
* For fs requests, rq is just carrier of independent bio's
* and each partial completion should be handled separately.
* Reset per-request error on each partial completion.
*
* TODO: tj: This is too subtle. It would be better to let
* low level drivers do what they see fit.
*/
if (req->cmd_type == REQ_TYPE_FS)
req->errors = 0;
if (error && req->cmd_type == REQ_TYPE_FS &&
!(req->cmd_flags & REQ_QUIET)) {
char *error_type;
switch (error) {
case -ENOLINK:
error_type = "recoverable transport";
break;
case -EREMOTEIO:
error_type = "critical target";
break;
case -EBADE:
error_type = "critical nexus";
break;
case -EIO:
default:
error_type = "I/O";
break;
}
printk(KERN_ERR "end_request: %s error, dev %s, sector %llu\n",
error_type, req->rq_disk ? req->rq_disk->disk_name : "?",
(unsigned long long)blk_rq_pos(req));
}
blk_account_io_completion(req, nr_bytes);
total_bytes = bio_nbytes = 0;
while ((bio = req->bio) != NULL) {
int nbytes;
if (nr_bytes >= bio->bi_size) {
req->bio = bio->bi_next;
nbytes = bio->bi_size;
req_bio_endio(req, bio, nbytes, error);
next_idx = 0;
bio_nbytes = 0;
} else {
int idx = bio->bi_idx + next_idx;
if (unlikely(idx >= bio->bi_vcnt)) {
blk_dump_rq_flags(req, "__end_that");
printk(KERN_ERR "%s: bio idx %d >= vcnt %d\n",
__func__, idx, bio->bi_vcnt);
break;
}
nbytes = bio_iovec_idx(bio, idx)->bv_len;
BIO_BUG_ON(nbytes > bio->bi_size);
/*
* not a complete bvec done
*/
if (unlikely(nbytes > nr_bytes)) {
bio_nbytes += nr_bytes;
total_bytes += nr_bytes;
break;
}
/*
* advance to the next vector
*/
next_idx++;
bio_nbytes += nbytes;
}
total_bytes += nbytes;
nr_bytes -= nbytes;
bio = req->bio;
if (bio) {
/*
* end more in this run, or just return 'not-done'
*/
if (unlikely(nr_bytes <= 0))
break;
}
}
/*
* completely done
*/
if (!req->bio) {
/*
* Reset counters so that the request stacking driver
* can find how many bytes remain in the request
* later.
*/
req->__data_len = 0;
return false;
}
/*
* if the request wasn't completed, update state
*/
if (bio_nbytes) {
req_bio_endio(req, bio, bio_nbytes, error);
bio->bi_idx += next_idx;
bio_iovec(bio)->bv_offset += nr_bytes;
bio_iovec(bio)->bv_len -= nr_bytes;
}
req->__data_len -= total_bytes;
req->buffer = bio_data(req->bio);
/* update sector only for requests with clear definition of sector */
if (req->cmd_type == REQ_TYPE_FS || (req->cmd_flags & REQ_DISCARD))
req->__sector += total_bytes >> 9;
/* mixed attributes always follow the first bio */
if (req->cmd_flags & REQ_MIXED_MERGE) {
req->cmd_flags &= ~REQ_FAILFAST_MASK;
req->cmd_flags |= req->bio->bi_rw & REQ_FAILFAST_MASK;
}
/*
* If total number of sectors is less than the first segment
* size, something has gone terribly wrong.
*/
if (blk_rq_bytes(req) < blk_rq_cur_bytes(req)) {
blk_dump_rq_flags(req, "request botched");
req->__data_len = blk_rq_cur_bytes(req);
}
/* recalculate the number of segments */
blk_recalc_rq_segments(req);
return true;
}
EXPORT_SYMBOL_GPL(blk_update_request);
static bool blk_update_bidi_request(struct request *rq, int error,
unsigned int nr_bytes,
unsigned int bidi_bytes)
{
if (blk_update_request(rq, error, nr_bytes))
return true;
/* Bidi request must be completed as a whole */
if (unlikely(blk_bidi_rq(rq)) &&
blk_update_request(rq->next_rq, error, bidi_bytes))
return true;
if (blk_queue_add_random(rq->q))
add_disk_randomness(rq->rq_disk);
return false;
}
/**
* blk_unprep_request - unprepare a request
* @req: the request
*
* This function makes a request ready for complete resubmission (or
* completion). It happens only after all error handling is complete,
* so represents the appropriate moment to deallocate any resources
* that were allocated to the request in the prep_rq_fn. The queue
* lock is held when calling this.
*/
void blk_unprep_request(struct request *req)
{
struct request_queue *q = req->q;
req->cmd_flags &= ~REQ_DONTPREP;
if (q->unprep_rq_fn)
q->unprep_rq_fn(q, req);
}
EXPORT_SYMBOL_GPL(blk_unprep_request);
/*
* queue lock must be held
*/
static void blk_finish_request(struct request *req, int error)
{
if (blk_rq_tagged(req))
blk_queue_end_tag(req->q, req);
BUG_ON(blk_queued_rq(req));
if (unlikely(laptop_mode) && req->cmd_type == REQ_TYPE_FS)
laptop_io_completion(&req->q->backing_dev_info);
blk_delete_timer(req);
if (req->cmd_flags & REQ_DONTPREP)
blk_unprep_request(req);
blk_account_io_done(req);
if (req->end_io)
req->end_io(req, error);
else {
if (blk_bidi_rq(req))
__blk_put_request(req->next_rq->q, req->next_rq);
__blk_put_request(req->q, req);
}
}
/**
* blk_end_bidi_request - Complete a bidi request
* @rq: the request to complete
* @error: %0 for success, < %0 for error
* @nr_bytes: number of bytes to complete @rq
* @bidi_bytes: number of bytes to complete @rq->next_rq
*
* Description:
* Ends I/O on a number of bytes attached to @rq and @rq->next_rq.
* Drivers that supports bidi can safely call this member for any
* type of request, bidi or uni. In the later case @bidi_bytes is
* just ignored.
*
* Return:
* %false - we are done with this request
* %true - still buffers pending for this request
**/
static bool blk_end_bidi_request(struct request *rq, int error,
unsigned int nr_bytes, unsigned int bidi_bytes)
{
struct request_queue *q = rq->q;
unsigned long flags;
if (blk_update_bidi_request(rq, error, nr_bytes, bidi_bytes))
return true;
spin_lock_irqsave(q->queue_lock, flags);
blk_finish_request(rq, error);
spin_unlock_irqrestore(q->queue_lock, flags);
return false;
}
/**
* __blk_end_bidi_request - Complete a bidi request with queue lock held
* @rq: the request to complete
* @error: %0 for success, < %0 for error
* @nr_bytes: number of bytes to complete @rq
* @bidi_bytes: number of bytes to complete @rq->next_rq
*
* Description:
* Identical to blk_end_bidi_request() except that queue lock is
* assumed to be locked on entry and remains so on return.
*
* Return:
* %false - we are done with this request
* %true - still buffers pending for this request
**/
static bool __blk_end_bidi_request(struct request *rq, int error,
unsigned int nr_bytes, unsigned int bidi_bytes)
{
if (blk_update_bidi_request(rq, error, nr_bytes, bidi_bytes))
return true;
blk_finish_request(rq, error);
return false;
}
/**
* blk_end_request - Helper function for drivers to complete the request.
* @rq: the request being processed
* @error: %0 for success, < %0 for error
* @nr_bytes: number of bytes to complete
*
* Description:
* Ends I/O on a number of bytes attached to @rq.
* If @rq has leftover, sets it up for the next range of segments.
*
* Return:
* %false - we are done with this request
* %true - still buffers pending for this request
**/
bool blk_end_request(struct request *rq, int error, unsigned int nr_bytes)
{
return blk_end_bidi_request(rq, error, nr_bytes, 0);
}
EXPORT_SYMBOL(blk_end_request);
/**
* blk_end_request_all - Helper function for drives to finish the request.
* @rq: the request to finish
* @error: %0 for success, < %0 for error
*
* Description:
* Completely finish @rq.
*/
void blk_end_request_all(struct request *rq, int error)
{
bool pending;
unsigned int bidi_bytes = 0;
if (unlikely(blk_bidi_rq(rq)))
bidi_bytes = blk_rq_bytes(rq->next_rq);
pending = blk_end_bidi_request(rq, error, blk_rq_bytes(rq), bidi_bytes);
BUG_ON(pending);
}
EXPORT_SYMBOL(blk_end_request_all);
/**
* blk_end_request_cur - Helper function to finish the current request chunk.
* @rq: the request to finish the current chunk for
* @error: %0 for success, < %0 for error
*
* Description:
* Complete the current consecutively mapped chunk from @rq.
*
* Return:
* %false - we are done with this request
* %true - still buffers pending for this request
*/
bool blk_end_request_cur(struct request *rq, int error)
{
return blk_end_request(rq, error, blk_rq_cur_bytes(rq));
}
EXPORT_SYMBOL(blk_end_request_cur);
/**
* blk_end_request_err - Finish a request till the next failure boundary.
* @rq: the request to finish till the next failure boundary for
* @error: must be negative errno
*
* Description:
* Complete @rq till the next failure boundary.
*
* Return:
* %false - we are done with this request
* %true - still buffers pending for this request
*/
bool blk_end_request_err(struct request *rq, int error)
{
WARN_ON(error >= 0);
return blk_end_request(rq, error, blk_rq_err_bytes(rq));
}
EXPORT_SYMBOL_GPL(blk_end_request_err);
/**
* __blk_end_request - Helper function for drivers to complete the request.
* @rq: the request being processed
* @error: %0 for success, < %0 for error
* @nr_bytes: number of bytes to complete
*
* Description:
* Must be called with queue lock held unlike blk_end_request().
*
* Return:
* %false - we are done with this request
* %true - still buffers pending for this request
**/
bool __blk_end_request(struct request *rq, int error, unsigned int nr_bytes)
{
return __blk_end_bidi_request(rq, error, nr_bytes, 0);
}
EXPORT_SYMBOL(__blk_end_request);
/**
* __blk_end_request_all - Helper function for drives to finish the request.
* @rq: the request to finish
* @error: %0 for success, < %0 for error
*
* Description:
* Completely finish @rq. Must be called with queue lock held.
*/
void __blk_end_request_all(struct request *rq, int error)
{
bool pending;
unsigned int bidi_bytes = 0;
if (unlikely(blk_bidi_rq(rq)))
bidi_bytes = blk_rq_bytes(rq->next_rq);
pending = __blk_end_bidi_request(rq, error, blk_rq_bytes(rq), bidi_bytes);
BUG_ON(pending);
}
EXPORT_SYMBOL(__blk_end_request_all);
/**
* __blk_end_request_cur - Helper function to finish the current request chunk.
* @rq: the request to finish the current chunk for
* @error: %0 for success, < %0 for error
*
* Description:
* Complete the current consecutively mapped chunk from @rq. Must
* be called with queue lock held.
*
* Return:
* %false - we are done with this request
* %true - still buffers pending for this request
*/
bool __blk_end_request_cur(struct request *rq, int error)
{
return __blk_end_request(rq, error, blk_rq_cur_bytes(rq));
}
EXPORT_SYMBOL(__blk_end_request_cur);
/**
* __blk_end_request_err - Finish a request till the next failure boundary.
* @rq: the request to finish till the next failure boundary for
* @error: must be negative errno
*
* Description:
* Complete @rq till the next failure boundary. Must be called
* with queue lock held.
*
* Return:
* %false - we are done with this request
* %true - still buffers pending for this request
*/
bool __blk_end_request_err(struct request *rq, int error)
{
WARN_ON(error >= 0);
return __blk_end_request(rq, error, blk_rq_err_bytes(rq));
}
EXPORT_SYMBOL_GPL(__blk_end_request_err);
void blk_rq_bio_prep(struct request_queue *q, struct request *rq,
struct bio *bio)
{
/* Bit 0 (R/W) is identical in rq->cmd_flags and bio->bi_rw */
rq->cmd_flags |= bio->bi_rw & REQ_WRITE;
if (bio_has_data(bio)) {
rq->nr_phys_segments = bio_phys_segments(q, bio);
rq->buffer = bio_data(bio);
}
rq->__data_len = bio->bi_size;
rq->bio = rq->biotail = bio;
if (bio->bi_bdev)
rq->rq_disk = bio->bi_bdev->bd_disk;
}
#if ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE
/**
* rq_flush_dcache_pages - Helper function to flush all pages in a request
* @rq: the request to be flushed
*
* Description:
* Flush all pages in @rq.
*/
void rq_flush_dcache_pages(struct request *rq)
{
struct req_iterator iter;
struct bio_vec *bvec;
rq_for_each_segment(bvec, rq, iter)
flush_dcache_page(bvec->bv_page);
}
EXPORT_SYMBOL_GPL(rq_flush_dcache_pages);
#endif
/**
* blk_lld_busy - Check if underlying low-level drivers of a device are busy
* @q : the queue of the device being checked
*
* Description:
* Check if underlying low-level drivers of a device are busy.
* If the drivers want to export their busy state, they must set own
* exporting function using blk_queue_lld_busy() first.
*
* Basically, this function is used only by request stacking drivers
* to stop dispatching requests to underlying devices when underlying
* devices are busy. This behavior helps more I/O merging on the queue
* of the request stacking driver and prevents I/O throughput regression
* on burst I/O load.
*
* Return:
* 0 - Not busy (The request stacking driver should dispatch request)
* 1 - Busy (The request stacking driver should stop dispatching request)
*/
int blk_lld_busy(struct request_queue *q)
{
if (q->lld_busy_fn)
return q->lld_busy_fn(q);
return 0;
}
EXPORT_SYMBOL_GPL(blk_lld_busy);
/**
* blk_rq_unprep_clone - Helper function to free all bios in a cloned request
* @rq: the clone request to be cleaned up
*
* Description:
* Free all bios in @rq for a cloned request.
*/
void blk_rq_unprep_clone(struct request *rq)
{
struct bio *bio;
while ((bio = rq->bio) != NULL) {
rq->bio = bio->bi_next;
bio_put(bio);
}
}
EXPORT_SYMBOL_GPL(blk_rq_unprep_clone);
/*
* Copy attributes of the original request to the clone request.
* The actual data parts (e.g. ->cmd, ->buffer, ->sense) are not copied.
*/
static void __blk_rq_prep_clone(struct request *dst, struct request *src)
{
dst->cpu = src->cpu;
dst->cmd_flags = (src->cmd_flags & REQ_CLONE_MASK) | REQ_NOMERGE;
dst->cmd_type = src->cmd_type;
dst->__sector = blk_rq_pos(src);
dst->__data_len = blk_rq_bytes(src);
dst->nr_phys_segments = src->nr_phys_segments;
dst->ioprio = src->ioprio;
dst->extra_len = src->extra_len;
}
/**
* blk_rq_prep_clone - Helper function to setup clone request
* @rq: the request to be setup
* @rq_src: original request to be cloned
* @bs: bio_set that bios for clone are allocated from
* @gfp_mask: memory allocation mask for bio
* @bio_ctr: setup function to be called for each clone bio.
* Returns %0 for success, non %0 for failure.
* @data: private data to be passed to @bio_ctr
*
* Description:
* Clones bios in @rq_src to @rq, and copies attributes of @rq_src to @rq.
* The actual data parts of @rq_src (e.g. ->cmd, ->buffer, ->sense)
* are not copied, and copying such parts is the caller's responsibility.
* Also, pages which the original bios are pointing to are not copied
* and the cloned bios just point same pages.
* So cloned bios must be completed before original bios, which means
* the caller must complete @rq before @rq_src.
*/
int blk_rq_prep_clone(struct request *rq, struct request *rq_src,
struct bio_set *bs, gfp_t gfp_mask,
int (*bio_ctr)(struct bio *, struct bio *, void *),
void *data)
{
struct bio *bio, *bio_src;
if (!bs)
bs = fs_bio_set;
blk_rq_init(NULL, rq);
__rq_for_each_bio(bio_src, rq_src) {
bio = bio_alloc_bioset(gfp_mask, bio_src->bi_max_vecs, bs);
if (!bio)
goto free_and_out;
__bio_clone(bio, bio_src);
if (bio_integrity(bio_src) &&
bio_integrity_clone(bio, bio_src, gfp_mask, bs))
goto free_and_out;
if (bio_ctr && bio_ctr(bio, bio_src, data))
goto free_and_out;
if (rq->bio) {
rq->biotail->bi_next = bio;
rq->biotail = bio;
} else
rq->bio = rq->biotail = bio;
}
__blk_rq_prep_clone(rq, rq_src);
return 0;
free_and_out:
if (bio)
bio_free(bio, bs);
blk_rq_unprep_clone(rq);
return -ENOMEM;
}
EXPORT_SYMBOL_GPL(blk_rq_prep_clone);
int kblockd_schedule_work(struct request_queue *q, struct work_struct *work)
{
return queue_work(kblockd_workqueue, work);
}
EXPORT_SYMBOL(kblockd_schedule_work);
int kblockd_schedule_delayed_work(struct request_queue *q,
struct delayed_work *dwork, unsigned long delay)
{
return queue_delayed_work(kblockd_workqueue, dwork, delay);
}
EXPORT_SYMBOL(kblockd_schedule_delayed_work);
#define PLUG_MAGIC 0x91827364
void blk_start_plug(struct blk_plug *plug)
{
struct task_struct *tsk = current;
plug->magic = PLUG_MAGIC;
INIT_LIST_HEAD(&plug->list);
INIT_LIST_HEAD(&plug->cb_list);
plug->should_sort = 0;
plug->count = 0;
/*
* If this is a nested plug, don't actually assign it. It will be
* flushed on its own.
*/
if (!tsk->plug) {
/*
* Store ordering should not be needed here, since a potential
* preempt will imply a full memory barrier
*/
tsk->plug = plug;
}
}
EXPORT_SYMBOL(blk_start_plug);
static int plug_rq_cmp(void *priv, struct list_head *a, struct list_head *b)
{
struct request *rqa = container_of(a, struct request, queuelist);
struct request *rqb = container_of(b, struct request, queuelist);
return !(rqa->q <= rqb->q);
}
/*
* If 'from_schedule' is true, then postpone the dispatch of requests
* until a safe kblockd context. We due this to avoid accidental big
* additional stack usage in driver dispatch, in places where the originally
* plugger did not intend it.
*/
static void queue_unplugged(struct request_queue *q, unsigned int depth,
bool from_schedule)
__releases(q->queue_lock)
{
trace_block_unplug(q, depth, !from_schedule);
/*
* If we are punting this to kblockd, then we can safely drop
* the queue_lock before waking kblockd (which needs to take
* this lock).
*/
if (from_schedule) {
spin_unlock(q->queue_lock);
blk_run_queue_async(q);
} else {
__blk_run_queue(q);
spin_unlock(q->queue_lock);
}
}
static void flush_plug_callbacks(struct blk_plug *plug)
{
LIST_HEAD(callbacks);
if (list_empty(&plug->cb_list))
return;
list_splice_init(&plug->cb_list, &callbacks);
while (!list_empty(&callbacks)) {
struct blk_plug_cb *cb = list_first_entry(&callbacks,
struct blk_plug_cb,
list);
list_del(&cb->list);
cb->callback(cb);
}
}
void blk_flush_plug_list(struct blk_plug *plug, bool from_schedule)
{
struct request_queue *q;
unsigned long flags;
struct request *rq;
LIST_HEAD(list);
unsigned int depth;
BUG_ON(plug->magic != PLUG_MAGIC);
flush_plug_callbacks(plug);
if (list_empty(&plug->list))
return;
list_splice_init(&plug->list, &list);
plug->count = 0;
if (plug->should_sort) {
list_sort(NULL, &list, plug_rq_cmp);
plug->should_sort = 0;
}
q = NULL;
depth = 0;
/*
* Save and disable interrupts here, to avoid doing it for every
* queue lock we have to take.
*/
local_irq_save(flags);
while (!list_empty(&list)) {
rq = list_entry_rq(list.next);
list_del_init(&rq->queuelist);
BUG_ON(!rq->q);
if (rq->q != q) {
/*
* This drops the queue lock
*/
if (q)
queue_unplugged(q, depth, from_schedule);
q = rq->q;
depth = 0;
spin_lock(q->queue_lock);
}
/*
* rq is already accounted, so use raw insert
*/
if (rq->cmd_flags & (REQ_FLUSH | REQ_FUA))
__elv_add_request(q, rq, ELEVATOR_INSERT_FLUSH);
else
__elv_add_request(q, rq, ELEVATOR_INSERT_SORT_MERGE);
depth++;
}
/*
* This drops the queue lock
*/
if (q)
queue_unplugged(q, depth, from_schedule);
local_irq_restore(flags);
}
void blk_finish_plug(struct blk_plug *plug)
{
blk_flush_plug_list(plug, false);
if (plug == current->plug)
current->plug = NULL;
}
EXPORT_SYMBOL(blk_finish_plug);
int __init blk_dev_init(void)
{
BUILD_BUG_ON(__REQ_NR_BITS > 8 *
sizeof(((struct request *)0)->cmd_flags));
/* used for unplugging and affects IO latency/throughput - HIGHPRI */
kblockd_workqueue = alloc_workqueue("kblockd",
WQ_MEM_RECLAIM | WQ_HIGHPRI, 0);
if (!kblockd_workqueue)
panic("Failed to create kblockd\n");
request_cachep = kmem_cache_create("blkdev_requests",
sizeof(struct request), 0, SLAB_PANIC, NULL);
blk_requestq_cachep = kmem_cache_create("blkdev_queue",
sizeof(struct request_queue), 0, SLAB_PANIC, NULL);
return 0;
}