| /dts-v1/; |
| |
| #include "kirkwood-nsa310-common.dtsi" |
| |
| / { |
| compatible = "zyxel,nsa310", "marvell,kirkwood-88f6281", "marvell,kirkwood"; |
| |
| memory { |
| device_type = "memory"; |
| reg = <0x00000000 0x10000000>; |
| }; |
| |
| chosen { |
| bootargs = "console=ttyS0,115200"; |
| }; |
| |
| mbus { |
| pcie-controller { |
| status = "okay"; |
| |
| pcie@1,0 { |
| status = "okay"; |
| }; |
| }; |
| }; |
| |
| ocp@f1000000 { |
| pinctrl: pinctrl@10000 { |
| pinctrl-0 = <&pmx_unknown>; |
| pinctrl-names = "default"; |
| |
| pmx_led_esata_green: pmx-led-esata-green { |
| marvell,pins = "mpp12"; |
| marvell,function = "gpio"; |
| }; |
| |
| pmx_led_esata_red: pmx-led-esata-red { |
| marvell,pins = "mpp13"; |
| marvell,function = "gpio"; |
| }; |
| |
| pmx_led_usb_green: pmx-led-usb-green { |
| marvell,pins = "mpp15"; |
| marvell,function = "gpio"; |
| }; |
| |
| pmx_led_usb_red: pmx-led-usb-red { |
| marvell,pins = "mpp16"; |
| marvell,function = "gpio"; |
| }; |
| |
| pmx_led_sys_green: pmx-led-sys-green { |
| marvell,pins = "mpp28"; |
| marvell,function = "gpio"; |
| }; |
| |
| pmx_led_sys_red: pmx-led-sys-red { |
| marvell,pins = "mpp29"; |
| marvell,function = "gpio"; |
| }; |
| |
| pmx_btn_reset: pmx-btn-reset { |
| marvell,pins = "mpp36"; |
| marvell,function = "gpio"; |
| }; |
| |
| pmx_btn_copy: pmx-btn-copy { |
| marvell,pins = "mpp37"; |
| marvell,function = "gpio"; |
| }; |
| |
| pmx_led_copy_green: pmx-led-copy-green { |
| marvell,pins = "mpp39"; |
| marvell,function = "gpio"; |
| }; |
| |
| pmx_led_copy_red: pmx-led-copy-red { |
| marvell,pins = "mpp40"; |
| marvell,function = "gpio"; |
| }; |
| |
| pmx_led_hdd_green: pmx-led-hdd-green { |
| marvell,pins = "mpp41"; |
| marvell,function = "gpio"; |
| }; |
| |
| pmx_led_hdd_red: pmx-led-hdd-red { |
| marvell,pins = "mpp42"; |
| marvell,function = "gpio"; |
| }; |
| |
| pmx_unknown: pmx-unknown { |
| marvell,pins = "mpp44"; |
| marvell,function = "gpio"; |
| }; |
| |
| pmx_btn_power: pmx-btn-power { |
| marvell,pins = "mpp46"; |
| marvell,function = "gpio"; |
| }; |
| }; |
| |
| i2c@11000 { |
| status = "okay"; |
| |
| adt7476: adt7476a@2e { |
| compatible = "adt7476"; |
| reg = <0x2e>; |
| }; |
| }; |
| }; |
| |
| gpio_keys { |
| compatible = "gpio-keys"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| pinctrl-0 = <&pmx_btn_reset &pmx_btn_copy &pmx_btn_power>; |
| pinctrl-names = "default"; |
| |
| button@1 { |
| label = "Power Button"; |
| linux,code = <KEY_POWER>; |
| gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>; |
| }; |
| button@2 { |
| label = "Copy Button"; |
| linux,code = <KEY_COPY>; |
| gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; |
| }; |
| button@3 { |
| label = "Reset Button"; |
| linux,code = <KEY_RESTART>; |
| gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; |
| }; |
| }; |
| |
| gpio-leds { |
| compatible = "gpio-leds"; |
| pinctrl-0 = <&pmx_led_esata_green &pmx_led_esata_red |
| &pmx_led_usb_green &pmx_led_usb_red |
| &pmx_led_sys_green &pmx_led_sys_red |
| &pmx_led_copy_green &pmx_led_copy_red |
| &pmx_led_hdd_green &pmx_led_hdd_red>; |
| pinctrl-names = "default"; |
| |
| green-sys { |
| label = "nsa310:green:sys"; |
| gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>; |
| }; |
| red-sys { |
| label = "nsa310:red:sys"; |
| gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>; |
| }; |
| green-hdd { |
| label = "nsa310:green:hdd"; |
| gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; |
| }; |
| red-hdd { |
| label = "nsa310:red:hdd"; |
| gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; |
| }; |
| green-esata { |
| label = "nsa310:green:esata"; |
| gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; |
| }; |
| red-esata { |
| label = "nsa310:red:esata"; |
| gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; |
| }; |
| green-usb { |
| label = "nsa310:green:usb"; |
| gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; |
| }; |
| red-usb { |
| label = "nsa310:red:usb"; |
| gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>; |
| }; |
| green-copy { |
| label = "nsa310:green:copy"; |
| gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; |
| }; |
| red-copy { |
| label = "nsa310:red:copy"; |
| gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; |
| }; |
| }; |
| }; |