[MTD] chips: Clean up trailing white spaces
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
diff --git a/drivers/mtd/chips/jedec_probe.c b/drivers/mtd/chips/jedec_probe.c
index 30da428..edb306c 100644
--- a/drivers/mtd/chips/jedec_probe.c
+++ b/drivers/mtd/chips/jedec_probe.c
@@ -1,7 +1,7 @@
-/*
+/*
Common Flash Interface probe code.
(C) 2000 Red Hat. GPL'd.
- $Id: jedec_probe.c,v 1.63 2005/02/14 16:30:32 bjd Exp $
+ $Id: jedec_probe.c,v 1.66 2005/11/07 11:14:23 gleixner Exp $
See JEDEC (http://www.jedec.org/) standard JESD21C (section 3.5)
for the standard this probe goes back to.
@@ -1719,7 +1719,7 @@
static struct mtd_info *jedec_probe(struct map_info *map);
-static inline u32 jedec_read_mfr(struct map_info *map, __u32 base,
+static inline u32 jedec_read_mfr(struct map_info *map, __u32 base,
struct cfi_private *cfi)
{
map_word result;
@@ -1730,7 +1730,7 @@
return result.x[0] & mask;
}
-static inline u32 jedec_read_id(struct map_info *map, __u32 base,
+static inline u32 jedec_read_id(struct map_info *map, __u32 base,
struct cfi_private *cfi)
{
map_word result;
@@ -1741,7 +1741,7 @@
return result.x[0] & mask;
}
-static inline void jedec_reset(u32 base, struct map_info *map,
+static inline void jedec_reset(u32 base, struct map_info *map,
struct cfi_private *cfi)
{
/* Reset */
@@ -1765,7 +1765,7 @@
* so ensure we're in read mode. Send both the Intel and the AMD command
* for this. Intel uses 0xff for this, AMD uses 0xff for NOP, so
* this should be safe.
- */
+ */
cfi_send_gen_cmd(0xFF, 0, base, map, cfi, cfi->device_type, NULL);
/* FIXME - should have reset delay before continuing */
}
@@ -1807,14 +1807,14 @@
printk("Found: %s\n",jedec_table[index].name);
num_erase_regions = jedec_table[index].NumEraseRegions;
-
+
p_cfi->cfiq = kmalloc(sizeof(struct cfi_ident) + num_erase_regions * 4, GFP_KERNEL);
if (!p_cfi->cfiq) {
//xx printk(KERN_WARNING "%s: kmalloc failed for CFI ident structure\n", map->name);
return 0;
}
- memset(p_cfi->cfiq,0,sizeof(struct cfi_ident));
+ memset(p_cfi->cfiq,0,sizeof(struct cfi_ident));
p_cfi->cfiq->P_ID = jedec_table[index].CmdSet;
p_cfi->cfiq->NumEraseRegions = jedec_table[index].NumEraseRegions;
@@ -1969,7 +1969,7 @@
cfi_send_gen_cmd(0x90, cfi->addr_unlock1, base, map, cfi, cfi->device_type, NULL);
/* FIXME - should have a delay before continuing */
- match_done:
+ match_done:
return rc;
}
@@ -1998,23 +1998,23 @@
"Probe at base(0x%08x) past the end of the map(0x%08lx)\n",
base, map->size -1);
return 0;
-
+
}
/* Ensure the unlock addresses we try stay inside the map */
probe_offset1 = cfi_build_cmd_addr(
- cfi->addr_unlock1,
- cfi_interleave(cfi),
+ cfi->addr_unlock1,
+ cfi_interleave(cfi),
cfi->device_type);
probe_offset2 = cfi_build_cmd_addr(
- cfi->addr_unlock1,
- cfi_interleave(cfi),
+ cfi->addr_unlock1,
+ cfi_interleave(cfi),
cfi->device_type);
if ( ((base + probe_offset1 + map_bankwidth(map)) >= map->size) ||
((base + probe_offset2 + map_bankwidth(map)) >= map->size))
{
goto retry;
}
-
+
/* Reset */
jedec_reset(base, map, cfi);
@@ -2027,13 +2027,13 @@
/* FIXME - should have a delay before continuing */
if (!cfi->numchips) {
- /* This is the first time we're called. Set up the CFI
+ /* This is the first time we're called. Set up the CFI
stuff accordingly and return */
-
+
cfi->mfr = jedec_read_mfr(map, base, cfi);
cfi->id = jedec_read_id(map, base, cfi);
DEBUG(MTD_DEBUG_LEVEL3,
- "Search for id:(%02x %02x) interleave(%d) type(%d)\n",
+ "Search for id:(%02x %02x) interleave(%d) type(%d)\n",
cfi->mfr, cfi->id, cfi_interleave(cfi), cfi->device_type);
for (i=0; i<sizeof(jedec_table)/sizeof(jedec_table[0]); i++) {
if ( jedec_match( base, map, cfi, &jedec_table[i] ) ) {
@@ -2062,7 +2062,7 @@
return 0;
}
}
-
+
/* Check each previous chip locations to see if it's an alias */
for (i=0; i < (base >> cfi->chipshift); i++) {
unsigned long start;
@@ -2083,7 +2083,7 @@
map->name, base, start);
return 0;
}
-
+
/* Yes, it's actually got the device IDs as data. Most
* unfortunate. Stick the new chip in read mode
* too and if it's the same, assume it's an alias. */
@@ -2097,20 +2097,20 @@
}
}
}
-
+
/* OK, if we got to here, then none of the previous chips appear to
be aliases for the current one. */
set_bit((base >> cfi->chipshift), chip_map); /* Update chip map */
cfi->numchips++;
-
+
ok_out:
/* Put it back into Read Mode */
jedec_reset(base, map, cfi);
printk(KERN_INFO "%s: Found %d x%d devices at 0x%x in %d-bit bank\n",
- map->name, cfi_interleave(cfi), cfi->device_type*8, base,
+ map->name, cfi_interleave(cfi), cfi->device_type*8, base,
map->bankwidth*8);
-
+
return 1;
}